Minimal ACPI support was added to the Qualcomm DWC3 glue driver in order to
enable USB on SDM850 and SC8180X compute platforms. The support is still
functional, but unnoticed regressions in other drivers indicates that no
one actually booting any of platforms dependent on this implementation.
The functionality provides is the bare minimum and is not expected to aid
in the effort of bringing full ACPI support to the driver in the future.
Remove the ACPI code from the Qualcomm DWC3 glue driver to aid in the
implementation of improvements that are actually used like multiport and
flattening device tree.
Commit message by Bjorn Andersson.
Signed-off-by: Krishna Kurapati <[email protected]>
---
drivers/usb/dwc3/dwc3-qcom.c | 273 ++---------------------------------
1 file changed, 11 insertions(+), 262 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index dbd6a5b2b289..a0879f224d96 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -4,7 +4,6 @@
* Inspired by dwc3-of-simple.c
*/
-#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/clk.h>
@@ -53,22 +52,10 @@
#define APPS_USB_AVG_BW 0
#define APPS_USB_PEAK_BW MBps_to_icc(40)
-struct dwc3_acpi_pdata {
- u32 qscratch_base_offset;
- u32 qscratch_base_size;
- u32 dwc3_core_base_size;
- int qusb2_phy_irq_index;
- int dp_hs_phy_irq_index;
- int dm_hs_phy_irq_index;
- int ss_phy_irq_index;
- bool is_urs;
-};
-
struct dwc3_qcom {
struct device *dev;
void __iomem *qscratch_base;
struct platform_device *dwc3;
- struct platform_device *urs_usb;
struct clk **clks;
int num_clocks;
struct reset_control *resets;
@@ -84,8 +71,6 @@ struct dwc3_qcom {
struct notifier_block vbus_nb;
struct notifier_block host_nb;
- const struct dwc3_acpi_pdata *acpi_pdata;
-
enum usb_dr_mode mode;
bool is_suspended;
bool pm_suspended;
@@ -248,9 +233,6 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
struct device *dev = qcom->dev;
int ret;
- if (has_acpi_companion(dev))
- return 0;
-
qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
if (IS_ERR(qcom->icc_path_ddr)) {
return dev_err_probe(dev, PTR_ERR(qcom->icc_path_ddr),
@@ -519,31 +501,13 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
PIPE_UTMI_CLK_DIS);
}
-static int dwc3_qcom_get_irq(struct platform_device *pdev,
- const char *name, int num)
-{
- struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
- struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
- struct device_node *np = pdev->dev.of_node;
- int ret;
-
- if (np)
- ret = platform_get_irq_byname_optional(pdev_irq, name);
- else
- ret = platform_get_irq_optional(pdev_irq, num);
-
- return ret;
-}
-
static int dwc3_qcom_setup_irq(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
- const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
int irq;
int ret;
- irq = dwc3_qcom_get_irq(pdev, "qusb2_phy",
- pdata ? pdata->qusb2_phy_irq_index : -1);
+ irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
if (irq > 0) {
/* Keep wakeup interrupts disabled until suspend */
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
@@ -557,8 +521,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
qcom->qusb2_phy_irq = irq;
}
- irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
- pdata ? pdata->dp_hs_phy_irq_index : -1);
+ irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
if (irq > 0) {
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
qcom_dwc3_resume_irq,
@@ -571,8 +534,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
qcom->dp_hs_phy_irq = irq;
}
- irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
- pdata ? pdata->dm_hs_phy_irq_index : -1);
+ irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
if (irq > 0) {
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
qcom_dwc3_resume_irq,
@@ -585,8 +547,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
qcom->dm_hs_phy_irq = irq;
}
- irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
- pdata ? pdata->ss_phy_irq_index : -1);
+ irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
if (irq > 0) {
ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
qcom_dwc3_resume_irq,
@@ -649,88 +610,6 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
return 0;
}
-static const struct property_entry dwc3_qcom_acpi_properties[] = {
- PROPERTY_ENTRY_STRING("dr_mode", "host"),
- {}
-};
-
-static const struct software_node dwc3_qcom_swnode = {
- .properties = dwc3_qcom_acpi_properties,
-};
-
-static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
-{
- struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
- struct device *dev = &pdev->dev;
- struct resource *res, *child_res = NULL;
- struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb :
- pdev;
- int irq;
- int ret;
-
- qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
- if (!qcom->dwc3)
- return -ENOMEM;
-
- qcom->dwc3->dev.parent = dev;
- qcom->dwc3->dev.type = dev->type;
- qcom->dwc3->dev.dma_mask = dev->dma_mask;
- qcom->dwc3->dev.dma_parms = dev->dma_parms;
- qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask;
-
- child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL);
- if (!child_res) {
- platform_device_put(qcom->dwc3);
- return -ENOMEM;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "failed to get memory resource\n");
- ret = -ENODEV;
- goto out;
- }
-
- child_res[0].flags = res->flags;
- child_res[0].start = res->start;
- child_res[0].end = child_res[0].start +
- qcom->acpi_pdata->dwc3_core_base_size;
-
- irq = platform_get_irq(pdev_irq, 0);
- if (irq < 0) {
- ret = irq;
- goto out;
- }
- child_res[1].flags = IORESOURCE_IRQ;
- child_res[1].start = child_res[1].end = irq;
-
- ret = platform_device_add_resources(qcom->dwc3, child_res, 2);
- if (ret) {
- dev_err(&pdev->dev, "failed to add resources\n");
- goto out;
- }
-
- ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to add properties\n");
- goto out;
- }
-
- ret = platform_device_add(qcom->dwc3);
- if (ret) {
- dev_err(&pdev->dev, "failed to add device\n");
- device_remove_software_node(&qcom->dwc3->dev);
- goto out;
- }
- kfree(child_res);
- return 0;
-
-out:
- platform_device_put(qcom->dwc3);
- kfree(child_res);
- return ret;
-}
-
static int dwc3_qcom_of_register_core(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
@@ -763,57 +642,12 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
return ret;
}
-static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev)
-{
- struct platform_device *urs_usb = NULL;
- struct fwnode_handle *fwh;
- struct acpi_device *adev;
- char name[8];
- int ret;
- int id;
-
- /* Figure out device id */
- ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
- if (!ret)
- return NULL;
-
- /* Find the child using name */
- snprintf(name, sizeof(name), "USB%d", id);
- fwh = fwnode_get_named_child_node(dev->fwnode, name);
- if (!fwh)
- return NULL;
-
- adev = to_acpi_device_node(fwh);
- if (!adev)
- goto err_put_handle;
-
- urs_usb = acpi_create_platform_device(adev, NULL);
- if (IS_ERR_OR_NULL(urs_usb))
- goto err_put_handle;
-
- return urs_usb;
-
-err_put_handle:
- fwnode_handle_put(fwh);
-
- return urs_usb;
-}
-
-static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb)
-{
- struct fwnode_handle *fwh = urs_usb->dev.fwnode;
-
- platform_device_unregister(urs_usb);
- fwnode_handle_put(fwh);
-}
-
static int dwc3_qcom_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct dwc3_qcom *qcom;
struct resource *res, *parent_res = NULL;
- struct resource local_res;
int ret, i;
bool ignore_pipe_clk;
bool wakeup_source;
@@ -825,14 +659,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, qcom);
qcom->dev = &pdev->dev;
- if (has_acpi_companion(dev)) {
- qcom->acpi_pdata = acpi_device_get_match_data(dev);
- if (!qcom->acpi_pdata) {
- dev_err(&pdev->dev, "no supporting ACPI device data\n");
- return -EINVAL;
- }
- }
-
qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
if (IS_ERR(qcom->resets)) {
return dev_err_probe(&pdev->dev, PTR_ERR(qcom->resets),
@@ -860,41 +686,18 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- if (np) {
- parent_res = res;
- } else {
- memcpy(&local_res, res, sizeof(struct resource));
- parent_res = &local_res;
-
- parent_res->start = res->start +
- qcom->acpi_pdata->qscratch_base_offset;
- parent_res->end = parent_res->start +
- qcom->acpi_pdata->qscratch_base_size;
-
- if (qcom->acpi_pdata->is_urs) {
- qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
- if (IS_ERR_OR_NULL(qcom->urs_usb)) {
- dev_err(dev, "failed to create URS USB platdev\n");
- if (!qcom->urs_usb)
- ret = -ENODEV;
- else
- ret = PTR_ERR(qcom->urs_usb);
- goto clk_disable;
- }
- }
- }
+ parent_res = res;
qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
if (IS_ERR(qcom->qscratch_base)) {
ret = PTR_ERR(qcom->qscratch_base);
- goto free_urs;
+ goto clk_disable;
}
ret = dwc3_qcom_setup_irq(pdev);
if (ret) {
dev_err(dev, "failed to setup IRQs, err=%d\n", ret);
- goto free_urs;
+ goto clk_disable;
}
/*
@@ -906,14 +709,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
if (ignore_pipe_clk)
dwc3_qcom_select_utmi_clk(qcom);
- if (np)
- ret = dwc3_qcom_of_register_core(pdev);
- else
- ret = dwc3_qcom_acpi_register_core(pdev);
-
+ ret = dwc3_qcom_of_register_core(pdev);
if (ret) {
dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
- goto free_urs;
+ goto clk_disable;
}
ret = dwc3_qcom_interconnect_init(qcom);
@@ -945,16 +744,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
interconnect_exit:
dwc3_qcom_interconnect_exit(qcom);
depopulate:
- if (np) {
- of_platform_depopulate(&pdev->dev);
- } else {
- device_remove_software_node(&qcom->dwc3->dev);
- platform_device_del(qcom->dwc3);
- }
+ of_platform_depopulate(&pdev->dev);
platform_device_put(qcom->dwc3);
-free_urs:
- if (qcom->urs_usb)
- dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
clk_disable:
for (i = qcom->num_clocks - 1; i >= 0; i--) {
clk_disable_unprepare(qcom->clks[i]);
@@ -969,21 +760,12 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
static void dwc3_qcom_remove(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
- struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
int i;
- if (np) {
- of_platform_depopulate(&pdev->dev);
- } else {
- device_remove_software_node(&qcom->dwc3->dev);
- platform_device_del(qcom->dwc3);
- }
+ of_platform_depopulate(&pdev->dev);
platform_device_put(qcom->dwc3);
- if (qcom->urs_usb)
- dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
-
for (i = qcom->num_clocks - 1; i >= 0; i--) {
clk_disable_unprepare(qcom->clks[i]);
clk_put(qcom->clks[i]);
@@ -1053,38 +835,6 @@ static const struct of_device_id dwc3_qcom_of_match[] = {
};
MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
-#ifdef CONFIG_ACPI
-static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
- .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
- .qscratch_base_size = SDM845_QSCRATCH_SIZE,
- .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
- .qusb2_phy_irq_index = 1,
- .dp_hs_phy_irq_index = 4,
- .dm_hs_phy_irq_index = 3,
- .ss_phy_irq_index = 2
-};
-
-static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
- .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
- .qscratch_base_size = SDM845_QSCRATCH_SIZE,
- .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
- .qusb2_phy_irq_index = 1,
- .dp_hs_phy_irq_index = 4,
- .dm_hs_phy_irq_index = 3,
- .ss_phy_irq_index = 2,
- .is_urs = true,
-};
-
-static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
- { "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
- { "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
- { "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata },
- { "QCOM04A6", (unsigned long)&sdm845_acpi_pdata },
- { },
-};
-MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
-#endif
-
static struct platform_driver dwc3_qcom_driver = {
.probe = dwc3_qcom_probe,
.remove_new = dwc3_qcom_remove,
@@ -1092,7 +842,6 @@ static struct platform_driver dwc3_qcom_driver = {
.name = "dwc3-qcom",
.pm = &dwc3_qcom_dev_pm_ops,
.of_match_table = dwc3_qcom_of_match,
- .acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match),
},
};
--
2.34.1
On Tue, Mar 05, 2024 at 09:51:43AM +0530, Krishna Kurapati wrote:
> Minimal ACPI support was added to the Qualcomm DWC3 glue driver in order to
> enable USB on SDM850 and SC8180X compute platforms. The support is still
> functional, but unnoticed regressions in other drivers indicates that no
> one actually booting any of platforms dependent on this implementation.
>
> The functionality provides is the bare minimum and is not expected to aid
> in the effort of bringing full ACPI support to the driver in the future.
>
> Remove the ACPI code from the Qualcomm DWC3 glue driver to aid in the
> implementation of improvements that are actually used like multiport and
> flattening device tree.
With a simple lookup function that returns the ACPI index based on name
this shouldn't be required to add multiport support even if it may
simplify it slightly. But IIRC it would help more with the devicetree
binding rework.
> Commit message by Bjorn Andersson.
>
> Signed-off-by: Krishna Kurapati <[email protected]>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 273 ++---------------------------------
> 1 file changed, 11 insertions(+), 262 deletions(-)
You should update the Kconfig entry for USB_DWC3_QCOM as well and drop
the ACPI dependency.
> static int dwc3_qcom_probe(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> struct device *dev = &pdev->dev;
> struct dwc3_qcom *qcom;
> struct resource *res, *parent_res = NULL;
You should drop parent_res as well.
> - struct resource local_res;
> int ret, i;
> bool ignore_pipe_clk;
> bool wakeup_source;
> @@ -825,14 +659,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
> platform_set_drvdata(pdev, qcom);
> qcom->dev = &pdev->dev;
>
> - if (has_acpi_companion(dev)) {
> - qcom->acpi_pdata = acpi_device_get_match_data(dev);
> - if (!qcom->acpi_pdata) {
> - dev_err(&pdev->dev, "no supporting ACPI device data\n");
> - return -EINVAL;
> - }
> - }
> -
> qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
> if (IS_ERR(qcom->resets)) {
> return dev_err_probe(&pdev->dev, PTR_ERR(qcom->resets),
> @@ -860,41 +686,18 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
> }
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -
> - if (np) {
> - parent_res = res;
> - } else {
> - memcpy(&local_res, res, sizeof(struct resource));
> - parent_res = &local_res;
> -
> - parent_res->start = res->start +
> - qcom->acpi_pdata->qscratch_base_offset;
> - parent_res->end = parent_res->start +
> - qcom->acpi_pdata->qscratch_base_size;
> -
> - if (qcom->acpi_pdata->is_urs) {
> - qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
> - if (IS_ERR_OR_NULL(qcom->urs_usb)) {
> - dev_err(dev, "failed to create URS USB platdev\n");
> - if (!qcom->urs_usb)
> - ret = -ENODEV;
> - else
> - ret = PTR_ERR(qcom->urs_usb);
> - goto clk_disable;
> - }
> - }
> - }
> + parent_res = res;
>
> qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
And just use res here.
> if (IS_ERR(qcom->qscratch_base)) {
> ret = PTR_ERR(qcom->qscratch_base);
> - goto free_urs;
> + goto clk_disable;
> }
Looks good to me otherwise.
Johan
On 3/5/2024 12:39 PM, Johan Hovold wrote:
> On Tue, Mar 05, 2024 at 09:51:43AM +0530, Krishna Kurapati wrote:
>> Minimal ACPI support was added to the Qualcomm DWC3 glue driver in order to
>> enable USB on SDM850 and SC8180X compute platforms. The support is still
>> functional, but unnoticed regressions in other drivers indicates that no
>> one actually booting any of platforms dependent on this implementation.
>>
>> The functionality provides is the bare minimum and is not expected to aid
>> in the effort of bringing full ACPI support to the driver in the future.
>>
>> Remove the ACPI code from the Qualcomm DWC3 glue driver to aid in the
>> implementation of improvements that are actually used like multiport and
>> flattening device tree.
>
> With a simple lookup function that returns the ACPI index based on name
> this shouldn't be required to add multiport support even if it may
> simplify it slightly. But IIRC it would help more with the devicetree
> binding rework.
>
I agree to both your comments.
Actually both series are equally important to me. Adding a lookup
function must ACPI index must help multiport code without this patch as
well. But removing this is helping in multiport to write better code and
definitely helps in flattening series.
>> Commit message by Bjorn Andersson.
>>
>> Signed-off-by: Krishna Kurapati <[email protected]>
>> ---
>> drivers/usb/dwc3/dwc3-qcom.c | 273 ++---------------------------------
>> 1 file changed, 11 insertions(+), 262 deletions(-)
>
> You should update the Kconfig entry for USB_DWC3_QCOM as well and drop
> the ACPI dependency.
Missed it. Thanks for the catch. The following is the one right ?
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 5fc27b20df63..31078f3d41b8 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -131,7 +131,7 @@ config USB_DWC3_QCOM
tristate "Qualcomm Platform"
depends on ARCH_QCOM || COMPILE_TEST
depends on EXTCON || !EXTCON
- depends on (OF || ACPI)
+ depends on OF
>
>> static int dwc3_qcom_probe(struct platform_device *pdev)
>> {
>> struct device_node *np = pdev->dev.of_node;
>> struct device *dev = &pdev->dev;
>> struct dwc3_qcom *qcom;
>> struct resource *res, *parent_res = NULL;
>
> You should drop parent_res as well.
Ahh, thanks for the catch.
>
>> - struct resource local_res;
>> int ret, i;
>> bool ignore_pipe_clk;
>> bool wakeup_source;
>> @@ -825,14 +659,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>> platform_set_drvdata(pdev, qcom);
>> qcom->dev = &pdev->dev;
>>
>> - if (has_acpi_companion(dev)) {
>> - qcom->acpi_pdata = acpi_device_get_match_data(dev);
>> - if (!qcom->acpi_pdata) {
>> - dev_err(&pdev->dev, "no supporting ACPI device data\n");
>> - return -EINVAL;
>> - }
>> - }
>> -
>> qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
>> if (IS_ERR(qcom->resets)) {
>> return dev_err_probe(&pdev->dev, PTR_ERR(qcom->resets),
>> @@ -860,41 +686,18 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
>> }
>>
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> -
>> - if (np) {
>> - parent_res = res;
>> - } else {
>> - memcpy(&local_res, res, sizeof(struct resource));
>> - parent_res = &local_res;
>> -
>> - parent_res->start = res->start +
>> - qcom->acpi_pdata->qscratch_base_offset;
>> - parent_res->end = parent_res->start +
>> - qcom->acpi_pdata->qscratch_base_size;
>> -
>> - if (qcom->acpi_pdata->is_urs) {
>> - qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
>> - if (IS_ERR_OR_NULL(qcom->urs_usb)) {
>> - dev_err(dev, "failed to create URS USB platdev\n");
>> - if (!qcom->urs_usb)
>> - ret = -ENODEV;
>> - else
>> - ret = PTR_ERR(qcom->urs_usb);
>> - goto clk_disable;
>> - }
>> - }
>> - }
>> + parent_res = res;
>>
>> qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
>
> And just use res here.
ACK.
>
>> if (IS_ERR(qcom->qscratch_base)) {
>> ret = PTR_ERR(qcom->qscratch_base);
>> - goto free_urs;
>> + goto clk_disable;
>> }
>
> Looks good to me otherwise.
Thanks for the review. Wanted to reply to your comments on multiport
series depending on how this patch goes in upstream.
Can I push out v2 or wait for a couple of days (as a standard practice
before putting a new version) ?
Regards,
Krishna,
On Tue, Mar 05, 2024 at 01:47:05PM +0530, Krishna Kurapati PSSNV wrote:
> On 3/5/2024 12:39 PM, Johan Hovold wrote:
> > On Tue, Mar 05, 2024 at 09:51:43AM +0530, Krishna Kurapati wrote:
> > You should update the Kconfig entry for USB_DWC3_QCOM as well and drop
> > the ACPI dependency.
>
> Missed it. Thanks for the catch. The following is the one right ?
>
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 5fc27b20df63..31078f3d41b8 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -131,7 +131,7 @@ config USB_DWC3_QCOM
> tristate "Qualcomm Platform"
> depends on ARCH_QCOM || COMPILE_TEST
> depends on EXTCON || !EXTCON
> - depends on (OF || ACPI)
> + depends on OF
Right.
> > Looks good to me otherwise.
>
> Thanks for the review. Wanted to reply to your comments on multiport
> series depending on how this patch goes in upstream.
>
> Can I push out v2 or wait for a couple of days (as a standard practice
> before putting a new version) ?
I think you can send a v2 straight away in this case.
Johan