Solution /sys/module/zswap/parameters/enabled attribute node
does not exist issue,handle zpool zbud initialization failed,
open CONFIG_ZSWAP CONFIG_ZPOOL CONFIG_ZBUD configuration,manual
zswap function by /sys/module/zswap/parameters/enabled file
Signed-off-by: mengfanhui <[email protected]>
---
arch/mips/configs/generic_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
index 071e2205c7ed..14884df392f4 100644
--- a/arch/mips/configs/generic_defconfig
+++ b/arch/mips/configs/generic_defconfig
@@ -13,6 +13,9 @@ CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
+CONFIG_ZSWAP=y
+CONFIG_ZPOOL=y
+CONFIG_ZBUD=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_BPF_SYSCALL=y
--
2.25.1
Who will be responsible for reviewing this? This is a necessary feature of the kernel that many testing agencies need to test
在 2024/1/26 15:55, mengfanhui 写道:
> Solution /sys/module/zswap/parameters/enabled attribute node
> does not exist issue,handle zpool zbud initialization failed,
> open CONFIG_ZSWAP CONFIG_ZPOOL CONFIG_ZBUD configuration,manual
> zswap function by /sys/module/zswap/parameters/enabled file
>
> Signed-off-by: mengfanhui <[email protected]>
> ---
> arch/mips/configs/generic_defconfig | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
> index 071e2205c7ed..14884df392f4 100644
> --- a/arch/mips/configs/generic_defconfig
> +++ b/arch/mips/configs/generic_defconfig
> @@ -13,6 +13,9 @@ CONFIG_CGROUP_DEVICE=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_NAMESPACES=y
> CONFIG_USER_NS=y
> +CONFIG_ZSWAP=y
> +CONFIG_ZPOOL=y
> +CONFIG_ZBUD=y
> CONFIG_SCHED_AUTOGROUP=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_BPF_SYSCALL=y
On Fri, Jan 26, 2024 at 03:55:47PM +0800, mengfanhui wrote:
> Solution /sys/module/zswap/parameters/enabled attribute node
> does not exist issue,handle zpool zbud initialization failed,
> open CONFIG_ZSWAP CONFIG_ZPOOL CONFIG_ZBUD configuration,manual
> zswap function by /sys/module/zswap/parameters/enabled file
>
> Signed-off-by: mengfanhui <[email protected]>
> ---
> arch/mips/configs/generic_defconfig | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
> index 071e2205c7ed..14884df392f4 100644
> --- a/arch/mips/configs/generic_defconfig
> +++ b/arch/mips/configs/generic_defconfig
> @@ -13,6 +13,9 @@ CONFIG_CGROUP_DEVICE=y
> CONFIG_CGROUP_CPUACCT=y
> CONFIG_NAMESPACES=y
> CONFIG_USER_NS=y
> +CONFIG_ZSWAP=y
> +CONFIG_ZPOOL=y
> +CONFIG_ZBUD=y
Any reason for choosing zbud over zsmalloc, the default zswap allocator?
> CONFIG_SCHED_AUTOGROUP=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_BPF_SYSCALL=y
> --
> 2.25.1
>
Zswap and zsmalloc are compression methods, and kernel configuration can be configured simultaneously.
zbud is an algorithm, and users can use that method if they want to use it.It won't affect each other.
在 2024/3/20 14:00, Yosry Ahmed 写道:
> On Fri, Jan 26, 2024 at 03:55:47PM +0800, mengfanhui wrote:
>> Solution /sys/module/zswap/parameters/enabled attribute node
>> does not exist issue,handle zpool zbud initialization failed,
>> open CONFIG_ZSWAP CONFIG_ZPOOL CONFIG_ZBUD configuration,manual
>> zswap function by /sys/module/zswap/parameters/enabled file
>>
>> Signed-off-by: mengfanhui <[email protected]>
>> ---
>> arch/mips/configs/generic_defconfig | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
>> index 071e2205c7ed..14884df392f4 100644
>> --- a/arch/mips/configs/generic_defconfig
>> +++ b/arch/mips/configs/generic_defconfig
>> @@ -13,6 +13,9 @@ CONFIG_CGROUP_DEVICE=y
>> CONFIG_CGROUP_CPUACCT=y
>> CONFIG_NAMESPACES=y
>> CONFIG_USER_NS=y
>> +CONFIG_ZSWAP=y
>> +CONFIG_ZPOOL=y
>> +CONFIG_ZBUD=y
>
> Any reason for choosing zbud over zsmalloc, the default zswap allocator?
>
>> CONFIG_SCHED_AUTOGROUP=y
>> CONFIG_BLK_DEV_INITRD=y
>> CONFIG_BPF_SYSCALL=y
>> --
>> 2.25.1
>>
在 2024/3/20 14:00, Yosry Ahmed 写道:
> On Fri, Jan 26, 2024 at 03:55:47PM +0800, mengfanhui wrote:
>> Solution /sys/module/zswap/parameters/enabled attribute node
>> does not exist issue,handle zpool zbud initialization failed,
>> open CONFIG_ZSWAP CONFIG_ZPOOL CONFIG_ZBUD configuration,manual
>> zswap function by /sys/module/zswap/parameters/enabled file
>>
>> Signed-off-by: mengfanhui <[email protected]>
>> ---
>> arch/mips/configs/generic_defconfig | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
>> index 071e2205c7ed..14884df392f4 100644
>> --- a/arch/mips/configs/generic_defconfig
>> +++ b/arch/mips/configs/generic_defconfig
>> @@ -13,6 +13,9 @@ CONFIG_CGROUP_DEVICE=y
>> CONFIG_CGROUP_CPUACCT=y
>> CONFIG_NAMESPACES=y
>> CONFIG_USER_NS=y
>> +CONFIG_ZSWAP=y
>> +CONFIG_ZPOOL=y
>> +CONFIG_ZBUD=y
>
> Any reason for choosing zbud over zsmalloc, the default zswap allocator?
>
>> CONFIG_SCHED_AUTOGROUP=y
>> CONFIG_BLK_DEV_INITRD=y
>> CONFIG_BPF_SYSCALL=y
>> --
>> 2.25.1
>>
On Wed, Mar 20, 2024 at 02:44:21PM +0800, mengfanhui wrote:
> Zswap and zsmalloc are compression methods, and kernel configuration can be configured simultaneously.
> zbud is an algorithm, and users can use that method if they want to use it.It won't affect each other.
Zswap compressed swapped out pages in-memory. To store those compressed
pages, it uses one of three allocators that implement the zpool API:
zbud, z3fold, and zsmalloc. In that sense, zsmalloc is comparable to
zbud, not zswap. I suspect you are mixing up zsmalloc and zram.
Anyway, zsmalloc is the default allocator and should be better for
almost all use cases. So unless you have a very good reason to use zbud
over zsmalloc, please do not use zbud. We are trying to deprecate zbud
and z3fold.
>
> 在 2024/3/20 14:00, Yosry Ahmed 写道:
> > On Fri, Jan 26, 2024 at 03:55:47PM +0800, mengfanhui wrote:
> >> Solution /sys/module/zswap/parameters/enabled attribute node
> >> does not exist issue,handle zpool zbud initialization failed,
> >> open CONFIG_ZSWAP CONFIG_ZPOOL CONFIG_ZBUD configuration,manual
> >> zswap function by /sys/module/zswap/parameters/enabled file
> >>
> >> Signed-off-by: mengfanhui <[email protected]>
> >> ---
> >> arch/mips/configs/generic_defconfig | 3 +++
> >> 1 file changed, 3 insertions(+)
> >>
> >> diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
> >> index 071e2205c7ed..14884df392f4 100644
> >> --- a/arch/mips/configs/generic_defconfig
> >> +++ b/arch/mips/configs/generic_defconfig
> >> @@ -13,6 +13,9 @@ CONFIG_CGROUP_DEVICE=y
> >> CONFIG_CGROUP_CPUACCT=y
> >> CONFIG_NAMESPACES=y
> >> CONFIG_USER_NS=y
> >> +CONFIG_ZSWAP=y
> >> +CONFIG_ZPOOL=y
> >> +CONFIG_ZBUD=y
> >
> > Any reason for choosing zbud over zsmalloc, the default zswap allocator?
> >
> >> CONFIG_SCHED_AUTOGROUP=y
> >> CONFIG_BLK_DEV_INITRD=y
> >> CONFIG_BPF_SYSCALL=y
> >> --
> >> 2.25.1
> >>
On Wed, Mar 20, 2024 at 10:00:49AM +0800, mengfanhui wrote:
> Who will be responsible for reviewing this? This is a necessary feature of the kernel that many testing agencies need to test
so they should add it to their kernel config. I don't see why a default config
should collect every bell and whistle somebody out in the world needs.
Thomas.
--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]