The CEDT contains similar entries as the SRAT. For diagnostic reasons
print the CEDT same style as the SRAT.
Adding also a pr_info() when successfully adding a CFMWS memory range.
Suggested-by: Alison Schofield <[email protected]> # CEDT node info
Signed-off-by: Robert Richter <[email protected]>
---
drivers/acpi/numa/srat.c | 122 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 121 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
index e45e64993c50..43417b4920da 100644
--- a/drivers/acpi/numa/srat.c
+++ b/drivers/acpi/numa/srat.c
@@ -300,6 +300,114 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
return -EINVAL;
}
+static int __init
+__acpi_table_print_cedt_entry(union acpi_subtable_headers *__header,
+ void *arg, const unsigned long table_end)
+{
+ struct acpi_cedt_header *header = (struct acpi_cedt_header *)__header;
+
+ switch (header->type) {
+ case ACPI_CEDT_TYPE_CHBS:
+ {
+ struct acpi_cedt_chbs *p =
+ (struct acpi_cedt_chbs *)header;
+
+ if (header->length < sizeof(struct acpi_cedt_chbs)) {
+ pr_warn("CEDT: unsupported CHBS entry: size %d\n",
+ header->length);
+ break;
+ }
+
+ pr_debug("CEDT: CHBS (0x%llx length 0x%llx uid %lu) %s (%d)\n",
+ (unsigned long long)p->base,
+ (unsigned long long)p->length,
+ (unsigned long)p->uid,
+ (p->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11) ?
+ "cxl11" :
+ (p->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL20) ?
+ "cxl20" :
+ "unsupported version",
+ p->cxl_version);
+ }
+ break;
+ case ACPI_CEDT_TYPE_CFMWS:
+ {
+ struct acpi_cedt_cfmws *p =
+ (struct acpi_cedt_cfmws *)header;
+ int eiw_to_ways[] = {1, 2, 4, 8, 16, 3, 6, 12};
+ int targets = -1;
+
+ if (header->length < sizeof(struct acpi_cedt_cfmws)) {
+ pr_warn("CEDT: unsupported CFMWS entry: size %d\n",
+ header->length);
+ break;
+ }
+
+ if (p->interleave_ways < ARRAY_SIZE(eiw_to_ways))
+ targets = eiw_to_ways[p->interleave_ways];
+ if (header->length < struct_size(
+ p, interleave_targets, targets))
+ targets = -1;
+
+ pr_debug("CEDT: CFMWS (0x%llx length 0x%llx) with %d target%s",
+ (unsigned long long)p->base_hpa,
+ (unsigned long long)p->window_size,
+ targets, targets > 1 ? "s" : "");
+ for (int i = 0; i < targets; i++)
+ pr_cont("%s%lu", i ? ", " : " (",
+ (unsigned long)p->interleave_targets[i]);
+ pr_cont("%s%s%s%s%s%s\n",
+ targets > 0 ? ")" : "",
+ (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE2) ?
+ " type2" : "",
+ (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE3) ?
+ " type3" : "",
+ (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_VOLATILE) ?
+ " volatile" : "",
+ (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_PMEM) ?
+ " pmem" : "",
+ (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_FIXED) ?
+ " fixed" : "");
+ }
+ break;
+ case ACPI_CEDT_TYPE_CXIMS:
+ {
+ struct acpi_cedt_cxims *p =
+ (struct acpi_cedt_cxims *)header;
+
+ if (header->length < sizeof(struct acpi_cedt_cxims)) {
+ pr_warn("CEDT: unsupported CXIMS entry: size %d\n",
+ header->length);
+ break;
+ }
+
+ pr_debug("CEDT: CXIMS (hbig %u nr_xormaps %u)\n",
+ (unsigned int)p->hbig,
+ (unsigned int)p->nr_xormaps);
+ }
+ break;
+ default:
+ pr_warn("CEDT: Found unsupported entry (type = 0x%x)\n",
+ header->type);
+ break;
+ }
+
+ return 0;
+}
+
+static void __init acpi_table_print_cedt_entry(enum acpi_cedt_type id)
+{
+ acpi_table_parse_cedt(id, __acpi_table_print_cedt_entry, NULL);
+}
+
+static void __init acpi_table_print_cedt(void)
+{
+ /* Print only implemented CEDT types */
+ acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CHBS);
+ acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CFMWS);
+ acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CXIMS);
+}
+
static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
void *arg, const unsigned long table_end)
{
@@ -318,8 +426,11 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
* found for any portion of the window to cover the entire
* window.
*/
- if (!numa_fill_memblks(start, end))
+ if (!numa_fill_memblks(start, end)) {
+ pr_info("CEDT: memblk extended [mem %#010Lx-%#010Lx]\n",
+ (unsigned long long) start, (unsigned long long) end - 1);
return 0;
+ }
/* No SRAT description. Create a new node. */
node = acpi_map_pxm_to_node(*fake_pxm);
@@ -334,13 +445,19 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
pr_warn("ACPI NUMA: Failed to add memblk for CFMWS node %d [mem %#llx-%#llx]\n",
node, start, end);
}
+
node_set(node, numa_nodes_parsed);
+ pr_info("CEDT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
+ node, *fake_pxm,
+ (unsigned long long) start, (unsigned long long) end - 1);
+
/* Set the next available fake_pxm value */
(*fake_pxm)++;
return 0;
}
#else
+static inline void acpi_table_print_cedt(void) {}
static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
void *arg, const unsigned long table_end)
{
@@ -526,6 +643,9 @@ int __init acpi_numa_init(void)
/* SLIT: System Locality Information Table */
acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
+ /* CEDT: CXL Early Discovery Table */
+ acpi_table_print_cedt();
+
/*
* CXL Fixed Memory Window Structures (CFMWS) must be parsed
* after the SRAT. Create NUMA Nodes for CXL memory ranges that
--
2.39.2
On Fri, 19 Apr 2024 16:02:00 +0200
Robert Richter <[email protected]> wrote:
> The CEDT contains similar entries as the SRAT. For diagnostic reasons
> print the CEDT same style as the SRAT.
>
> Adding also a pr_info() when successfully adding a CFMWS memory range.
>
> Suggested-by: Alison Schofield <[email protected]> # CEDT node info
> Signed-off-by: Robert Richter <[email protected]>
Hi Robert,
Comments inline,
Jonathan
> ---
> drivers/acpi/numa/srat.c | 122 ++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 121 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
> index e45e64993c50..43417b4920da 100644
> --- a/drivers/acpi/numa/srat.c
> +++ b/drivers/acpi/numa/srat.c
> @@ -300,6 +300,114 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
> return -EINVAL;
> }
>
> +static int __init
> +__acpi_table_print_cedt_entry(union acpi_subtable_headers *__header,
> + void *arg, const unsigned long table_end)
> +{
> + struct acpi_cedt_header *header = (struct acpi_cedt_header *)__header;
As below. There is very little shred by the different types in here, so
I'd break it up into separate functions and just call the relevant
one.
> +
> + switch (header->type) {
> + case ACPI_CEDT_TYPE_CHBS:
> + {
> + struct acpi_cedt_chbs *p =
> + (struct acpi_cedt_chbs *)header;
> +
> + if (header->length < sizeof(struct acpi_cedt_chbs)) {
sizeof(*p) perhaps?
> + pr_warn("CEDT: unsupported CHBS entry: size %d\n",
> + header->length);
> + break;
> + }
> +
> + pr_debug("CEDT: CHBS (0x%llx length 0x%llx uid %lu) %s (%d)\n",
> + (unsigned long long)p->base,
> + (unsigned long long)p->length,
> + (unsigned long)p->uid,
> + (p->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11) ?
> + "cxl11" :
> + (p->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL20) ?
> + "cxl20" :
> + "unsupported version",
> + p->cxl_version);
> + }
> + break;
> + case ACPI_CEDT_TYPE_CFMWS:
> + {
> + struct acpi_cedt_cfmws *p =
> + (struct acpi_cedt_cfmws *)header;
> + int eiw_to_ways[] = {1, 2, 4, 8, 16, 3, 6, 12};
> + int targets = -1;
> +
> + if (header->length < sizeof(struct acpi_cedt_cfmws)) {
sizeof(*p) perhaps?
> + pr_warn("CEDT: unsupported CFMWS entry: size %d\n",
> + header->length);
> + break;
> + }
> +
> + if (p->interleave_ways < ARRAY_SIZE(eiw_to_ways))
> + targets = eiw_to_ways[p->interleave_ways];
> + if (header->length < struct_size(
> + p, interleave_targets, targets))
> + targets = -1;
Not a warning?
> +
> + pr_debug("CEDT: CFMWS (0x%llx length 0x%llx) with %d target%s",
> + (unsigned long long)p->base_hpa,
> + (unsigned long long)p->window_size,
> + targets, targets > 1 ? "s" : "");
> + for (int i = 0; i < targets; i++)
> + pr_cont("%s%lu", i ? ", " : " (",
> + (unsigned long)p->interleave_targets[i]);
This seems odd. I don't think there is a good way to do combined pr_debug() and pr_cont()
There was a discussion about this a few years ago...
> + pr_cont("%s%s%s%s%s%s\n",
> + targets > 0 ? ")" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE2) ?
> + " type2" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE3) ?
> + " type3" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_VOLATILE) ?
> + " volatile" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_PMEM) ?
> + " pmem" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_FIXED) ?
> + " fixed" : "");
> + }
> + break;
> + case ACPI_CEDT_TYPE_CXIMS:
> + {
> + struct acpi_cedt_cxims *p =
> + (struct acpi_cedt_cxims *)header;
> +
> + if (header->length < sizeof(struct acpi_cedt_cxims)) {
sizeof(*p) perhaps?
> + pr_warn("CEDT: unsupported CXIMS entry: size %d\n",
> + header->length);
> + break;
I'd go with direct returns in these to make the code flow easier to read.
> + }
> +
> + pr_debug("CEDT: CXIMS (hbig %u nr_xormaps %u)\n",
> + (unsigned int)p->hbig,
> + (unsigned int)p->nr_xormaps);
> + }
> + break;
> + default:
> + pr_warn("CEDT: Found unsupported entry (type = 0x%x)\n",
> + header->type);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static void __init acpi_table_print_cedt_entry(enum acpi_cedt_type id)
> +{
> + acpi_table_parse_cedt(id, __acpi_table_print_cedt_entry, NULL);
> +}
> +
> +static void __init acpi_table_print_cedt(void)
> +{
> + /* Print only implemented CEDT types */
> + acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CHBS);
> + acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CFMWS);
> + acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CXIMS);
Would this be cleaner just breaking these up?
acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, print_chbs_entry, NULL);
acpi_table_parse_cedt(ACPI_CEDT_TYPE_CFMWS, print_cfmws_entry, NULL);
acpi_table_parse_cedt(ACPI_CEDT_TYPE_CXIMS, print_cxims_entry, NULL);
> +}
> +
> static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> void *arg, const unsigned long table_end)
> {
> @@ -318,8 +426,11 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> * found for any portion of the window to cover the entire
> * window.
> */
> - if (!numa_fill_memblks(start, end))
> + if (!numa_fill_memblks(start, end)) {
> + pr_info("CEDT: memblk extended [mem %#010Lx-%#010Lx]\n",
> + (unsigned long long) start, (unsigned long long) end - 1);
> return 0;
> + }
>
> /* No SRAT description. Create a new node. */
> node = acpi_map_pxm_to_node(*fake_pxm);
> @@ -334,13 +445,19 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> pr_warn("ACPI NUMA: Failed to add memblk for CFMWS node %d [mem %#llx-%#llx]\n",
> node, start, end);
> }
> +
Unrelated changed. Best to clean this out to avoid the (really minor) noise.
> node_set(node, numa_nodes_parsed);
>
> + pr_info("CEDT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
> + node, *fake_pxm,
> + (unsigned long long) start, (unsigned long long) end - 1);
> +
> /* Set the next available fake_pxm value */
> (*fake_pxm)++;
> return 0;
> }
> #else
> +static inline void acpi_table_print_cedt(void) {}
> static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> void *arg, const unsigned long table_end)
> {
> @@ -526,6 +643,9 @@ int __init acpi_numa_init(void)
> /* SLIT: System Locality Information Table */
> acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
>
> + /* CEDT: CXL Early Discovery Table */
> + acpi_table_print_cedt();
> +
> /*
> * CXL Fixed Memory Window Structures (CFMWS) must be parsed
> * after the SRAT. Create NUMA Nodes for CXL memory ranges that
On Fri, Apr 19, 2024 at 04:02:00PM +0200, Robert Richter wrote:
> The CEDT contains similar entries as the SRAT. For diagnostic reasons
> print the CEDT same style as the SRAT.
>
> Adding also a pr_info() when successfully adding a CFMWS memory range.
>
> Suggested-by: Alison Schofield <[email protected]> # CEDT node info
Ah, I see you annotated the Suggested-by. I did suggest the pr_info
when we extend or add a node during CFMWS parsing.
There is an update in acpitools for CEDT decode and dump[1] offering
pretty dumps of this info. Is this printing for convenience or for
something else?
[1] https://github.com/acpica/acpica/pull/939
-- Alison
> Signed-off-by: Robert Richter <[email protected]>
> ---
> drivers/acpi/numa/srat.c | 122 ++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 121 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c
> index e45e64993c50..43417b4920da 100644
> --- a/drivers/acpi/numa/srat.c
> +++ b/drivers/acpi/numa/srat.c
> @@ -300,6 +300,114 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
> return -EINVAL;
> }
>
> +static int __init
> +__acpi_table_print_cedt_entry(union acpi_subtable_headers *__header,
> + void *arg, const unsigned long table_end)
> +{
> + struct acpi_cedt_header *header = (struct acpi_cedt_header *)__header;
> +
> + switch (header->type) {
> + case ACPI_CEDT_TYPE_CHBS:
> + {
> + struct acpi_cedt_chbs *p =
> + (struct acpi_cedt_chbs *)header;
> +
> + if (header->length < sizeof(struct acpi_cedt_chbs)) {
> + pr_warn("CEDT: unsupported CHBS entry: size %d\n",
> + header->length);
> + break;
> + }
> +
> + pr_debug("CEDT: CHBS (0x%llx length 0x%llx uid %lu) %s (%d)\n",
> + (unsigned long long)p->base,
> + (unsigned long long)p->length,
> + (unsigned long)p->uid,
> + (p->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11) ?
> + "cxl11" :
> + (p->cxl_version == ACPI_CEDT_CHBS_VERSION_CXL20) ?
> + "cxl20" :
> + "unsupported version",
> + p->cxl_version);
> + }
> + break;
> + case ACPI_CEDT_TYPE_CFMWS:
> + {
> + struct acpi_cedt_cfmws *p =
> + (struct acpi_cedt_cfmws *)header;
> + int eiw_to_ways[] = {1, 2, 4, 8, 16, 3, 6, 12};
> + int targets = -1;
> +
> + if (header->length < sizeof(struct acpi_cedt_cfmws)) {
> + pr_warn("CEDT: unsupported CFMWS entry: size %d\n",
> + header->length);
> + break;
> + }
> +
> + if (p->interleave_ways < ARRAY_SIZE(eiw_to_ways))
> + targets = eiw_to_ways[p->interleave_ways];
> + if (header->length < struct_size(
> + p, interleave_targets, targets))
> + targets = -1;
> +
> + pr_debug("CEDT: CFMWS (0x%llx length 0x%llx) with %d target%s",
> + (unsigned long long)p->base_hpa,
> + (unsigned long long)p->window_size,
> + targets, targets > 1 ? "s" : "");
> + for (int i = 0; i < targets; i++)
> + pr_cont("%s%lu", i ? ", " : " (",
> + (unsigned long)p->interleave_targets[i]);
> + pr_cont("%s%s%s%s%s%s\n",
> + targets > 0 ? ")" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE2) ?
> + " type2" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE3) ?
> + " type3" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_VOLATILE) ?
> + " volatile" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_PMEM) ?
> + " pmem" : "",
> + (p->restrictions & ACPI_CEDT_CFMWS_RESTRICT_FIXED) ?
> + " fixed" : "");
> + }
> + break;
> + case ACPI_CEDT_TYPE_CXIMS:
> + {
> + struct acpi_cedt_cxims *p =
> + (struct acpi_cedt_cxims *)header;
> +
> + if (header->length < sizeof(struct acpi_cedt_cxims)) {
> + pr_warn("CEDT: unsupported CXIMS entry: size %d\n",
> + header->length);
> + break;
> + }
> +
> + pr_debug("CEDT: CXIMS (hbig %u nr_xormaps %u)\n",
> + (unsigned int)p->hbig,
> + (unsigned int)p->nr_xormaps);
> + }
> + break;
> + default:
> + pr_warn("CEDT: Found unsupported entry (type = 0x%x)\n",
> + header->type);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static void __init acpi_table_print_cedt_entry(enum acpi_cedt_type id)
> +{
> + acpi_table_parse_cedt(id, __acpi_table_print_cedt_entry, NULL);
> +}
> +
> +static void __init acpi_table_print_cedt(void)
> +{
> + /* Print only implemented CEDT types */
> + acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CHBS);
> + acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CFMWS);
> + acpi_table_print_cedt_entry(ACPI_CEDT_TYPE_CXIMS);
> +}
> +
> static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> void *arg, const unsigned long table_end)
> {
> @@ -318,8 +426,11 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> * found for any portion of the window to cover the entire
> * window.
> */
> - if (!numa_fill_memblks(start, end))
> + if (!numa_fill_memblks(start, end)) {
> + pr_info("CEDT: memblk extended [mem %#010Lx-%#010Lx]\n",
> + (unsigned long long) start, (unsigned long long) end - 1);
> return 0;
> + }
>
> /* No SRAT description. Create a new node. */
> node = acpi_map_pxm_to_node(*fake_pxm);
> @@ -334,13 +445,19 @@ static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> pr_warn("ACPI NUMA: Failed to add memblk for CFMWS node %d [mem %#llx-%#llx]\n",
> node, start, end);
> }
> +
> node_set(node, numa_nodes_parsed);
>
> + pr_info("CEDT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
> + node, *fake_pxm,
> + (unsigned long long) start, (unsigned long long) end - 1);
> +
> /* Set the next available fake_pxm value */
> (*fake_pxm)++;
> return 0;
> }
> #else
> +static inline void acpi_table_print_cedt(void) {}
> static int __init acpi_parse_cfmws(union acpi_subtable_headers *header,
> void *arg, const unsigned long table_end)
> {
> @@ -526,6 +643,9 @@ int __init acpi_numa_init(void)
> /* SLIT: System Locality Information Table */
> acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
>
> + /* CEDT: CXL Early Discovery Table */
> + acpi_table_print_cedt();
> +
> /*
> * CXL Fixed Memory Window Structures (CFMWS) must be parsed
> * after the SRAT. Create NUMA Nodes for CXL memory ranges that
> --
> 2.39.2
>
On 22.04.24 13:56:00, Alison Schofield wrote:
> On Fri, Apr 19, 2024 at 04:02:00PM +0200, Robert Richter wrote:
> > The CEDT contains similar entries as the SRAT. For diagnostic reasons
> > print the CEDT same style as the SRAT.
> >
> > Adding also a pr_info() when successfully adding a CFMWS memory range.
> >
> > Suggested-by: Alison Schofield <[email protected]> # CEDT node info
>
> Ah, I see you annotated the Suggested-by. I did suggest the pr_info
> when we extend or add a node during CFMWS parsing.
That's what I meant here and what I have added to this patch with this
update.
>
> There is an update in acpitools for CEDT decode and dump[1] offering
> pretty dumps of this info. Is this printing for convenience or for
> something else?
No, this helped early boot debugging of kernel and ACPI issues since
CEDT entries are important for this. For acpitools you need the
machine to be up already. If it is not part of the kernel log there
would be a 2nd step needed to get this information from. The patch
also lifts CEDT logging to the same level as for SRAT.
I hope that makes sense?
Thanks,
-Robert
>
> [1] https://github.com/acpica/acpica/pull/939
>
> -- Alison
Robert Richter wrote:
> The CEDT contains similar entries as the SRAT. For diagnostic reasons
> print the CEDT same style as the SRAT.
>
> Adding also a pr_info() when successfully adding a CFMWS memory range.
>
> Suggested-by: Alison Schofield <[email protected]> # CEDT node info
> Signed-off-by: Robert Richter <[email protected]>
This patch feels out of place with the rest. At a minimum it should come
at the end. For me, I would just drop it altogether unless there is
some motivation to enable more bootup debug messages.