This is the start of the stable review cycle for the 5.10.61 release.
There are 98 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu 26 Aug 2021 04:58:25 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.60
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
Thanks,
Sasha
-------------
Pseudo-Shortlog of commits:
Adrian Larumbe (1):
dmaengine: xilinx_dma: Fix read-after-free bug when terminating
transfers
Alan Stern (2):
USB: core: Avoid WARNings for 0-length descriptor requests
USB: core: Fix incorrect pipe calculation in do_proc_control()
Andreas Persson (1):
mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cards
Andy Shevchenko (1):
ptp_pch: Restore dependency on PCI
Arkadiusz Kubalewski (1):
i40e: Fix ATR queue selection
Bing Guo (1):
drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1X
Bjorn Andersson (1):
clk: qcom: gdsc: Ensure regulator init state matches GDSC state
Christophe Kerello (1):
mmc: mmci: stm32: Check when the voltage switch procedure should be
done
Dan Carpenter (1):
media: zr364xx: fix memory leaks in probe()
Dave Gerlach (1):
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
Dinghao Liu (1):
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
Dong Aisheng (1):
clk: imx6q: fix uart earlycon unwork
Dongliang Mu (2):
ipack: tpci200: fix many double free issues in tpci200_pci_probe
ipack: tpci200: fix memory leak in the tpci200_register
Eli Cohen (1):
vdpa/mlx5: Avoid destroying MR on empty iotlb
Evgeny Novikov (1):
media: zr364xx: propagate errors from zr364xx_start_readpipe()
Frank Wunderlich (1):
iommu: Check if group is NULL before remove device
Harshvardhan Jha (2):
net: xfrm: Fix end of loop tests for list_for_each_entry
scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
Hayes Wang (1):
r8152: fix writing USB_BP2_EN
Ido Schimmel (1):
Revert "flow_offload: action should not be NULL when it is referenced"
Igor Pylypiv (1):
scsi: pm80xx: Fix TMF task completion race condition
Ilya Leoshkevich (1):
bpf: Clear zext_dst of dead insns
Ivan T. Ivanov (1):
net: usb: lan78xx: don't modify phy_device state concurrently
Jakub Kicinski (4):
bnxt: don't lock the tx queue from napi poll
bnxt: disable napi before canceling DIM
bnxt: make sure xmit_more + errors does not miss doorbells
bnxt: count Tx drops
Jaroslav Kysela (1):
ALSA: hda - fix the 'Capture Switch' value change notifications
Jason Wang (1):
virtio-net: use NETIF_F_GRO_HW instead of NETIF_F_LRO
Jeff Layton (1):
fs: warn about impending deprecation of mandatory locks
Jens Axboe (2):
io_uring: fix xa_alloc_cycle() error return value check
io_uring: only assign io_uring_enter() SQPOLL error in actual error
case
Johannes Weiner (1):
mm: memcontrol: fix occasional OOMs due to proportional memory.low
reclaim
Jouni Malinen (5):
ath: Use safer key clearing with key cache entries
ath9k: Clear key cache explicitly on disabling hardware
ath: Export ath_hw_keysetmac()
ath: Modify ath_key_delete() to not need full key entry
ath9k: Postpone key cache entry deletion for TXQ frames reference it
Kai-Heng Feng (1):
ALSA: hda/realtek: Limit mic boost on HP ProBook 445 G8
Kristin Paget (1):
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop
Lahav Schlesinger (1):
vrf: Reset skb conntrack connection on VRF rcv
Linus Torvalds (1):
pipe: avoid unnecessary EPOLLET wakeups under normal loads
Liu Yi L (1):
iommu/vt-d: Fix incomplete cache flush in
intel_pasid_tear_down_entry()
Lu Baolu (1):
iommu/vt-d: Consolidate duplicate cache invaliation code
Marcin Bachry (1):
PCI: Increase D3 delay for AMD Renoir/Cezanne XHCI
Marek Behún (1):
cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant
Michael Chan (2):
bnxt_en: Disable aRFS if running on 212 firmware
bnxt_en: Add missing DMA memory barriers
NeilBrown (1):
btrfs: prevent rename2 from exchanging a subvol with a directory from
different parents
Nicolas Saenz Julienne (2):
mmc: sdhci-iproc: Cap min clock frequency on BCM2711
mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711
Niklas Schnelle (1):
s390/pci: fix use after free of zpci_dev
Ole Bjørn Midtbø (1):
Bluetooth: hidp: use correct wait queue when removing ctrl_wait
Parav Pandit (3):
vdpa: Extend routine to accept vdpa device name
vdpa: Define vdpa mgmt device, ops and a netlink interface
virtio: Protect vqs list access
Pavel Skripkin (2):
media: drivers/media/usb: fix memory leak in zr364xx_probe
net: 6pack: fix slab-out-of-bounds in decode_data
Peter Ujfalusi (1):
dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller
is not yet available
Petko Manolov (1):
net: usb: pegasus: Check the return value of get_geristers() and
friends;
Petr Vorel (1):
arm64: dts: qcom: msm8992-bullhead: Remove PSCI
Prabhakar Kushwaha (1):
qede: fix crash in rmmod qede while automatic debug collection
Qingqing Zhuo (1):
drm/amd/display: workaround for hard hang on HPD on native DP
Randy Dunlap (1):
dccp: add do-while-0 stubs for dccp_pr_debug macros
Saravana Kannan (2):
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Handle -EPROBE_DEFER correctly
Sasha Levin (1):
Linux 5.10.61-rc1
Shaik Sajida Bhanu (1):
mmc: sdhci-msm: Update the software timeout value for sdhc
Sreekanth Reddy (1):
scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
Srinivas Kandagatla (4):
arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x
slimbus: messaging: start transaction ids from 1 instead of zero
slimbus: messaging: check for valid transaction id
slimbus: ngd: reset dma setup during runtime pm
Steven Rostedt (VMware) (1):
tracing / histogram: Fix NULL pointer dereference on strcmp() on NULL
event name
Sudeep Holla (1):
ARM: dts: nomadik: Fix up interrupt controller node names
Sylwester Dziedziuch (1):
iavf: Fix ping is lost after untrusted VF had tried to change MAC
Takashi Iwai (2):
ALSA: hda/via: Apply runtime PM workaround for ASUS B23E
ASoC: intel: atom: Fix breakage for PCM buffer address setup
Toke Høiland-Jørgensen (1):
sch_cake: fix srchost/dsthost hashing mode
Tony Lindgren (1):
bus: ti-sysc: Fix error handling for sysc_check_active_timer()
Uwe Kleine-König (1):
spi: spi-mux: Add module info needed for autoloading
Vincent Whitchurch (1):
mmc: dw_mmc: Fix hang on data CRC error
Wang Hai (1):
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
Wanpeng Li (1):
KVM: X86: Fix warning caused by stale emulation context
Wei Huang (1):
KVM: x86: Factor out x86 instruction emulation with decoding
Xie Yongji (2):
vhost-vdpa: Fix integer overflow in vhost_vdpa_process_iotlb_update()
vhost: Fix the calculation in vhost_overflow()
Xuan Zhuo (1):
virtio-net: support XDP when not more queues
Ye Bin (1):
scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()
Yifan Zhang (1):
drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir.
Yongqiang Niu (2):
soc / drm: mediatek: Move DDP component defines into mtk-mmsys.h
drm/mediatek: Fix aal size config
Yu Kuai (1):
dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
jason-jh.lin (1):
drm/mediatek: Add AAL output size configuration
kaixi.fan (1):
ovs: clear skb->tstamp in forwarding path
lijinlin (1):
scsi: core: Fix capacity set to zero after offlinining device
Makefile | 4 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 4 +-
.../dts/qcom/msm8992-bullhead-rev-101.dts | 4 +
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 +-
arch/s390/pci/pci.c | 6 +
arch/s390/pci/pci_bus.h | 5 +
arch/x86/kvm/x86.c | 62 +++--
arch/x86/kvm/x86.h | 2 +
drivers/bus/ti-sysc.c | 4 +-
drivers/clk/imx/clk-imx6q.c | 2 +-
drivers/clk/qcom/gdsc.c | 54 ++--
drivers/cpufreq/armada-37xx-cpufreq.c | 6 +-
drivers/dma/of-dma.c | 9 +-
drivers/dma/sh/usb-dmac.c | 2 +-
drivers/dma/xilinx/xilinx_dma.c | 12 +
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 21 +-
.../amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c | 4 +-
.../gpu/drm/amd/display/dc/dcn20/dcn20_optc.c | 2 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 4 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 34 +--
drivers/iommu/intel/pasid.c | 26 +-
drivers/iommu/intel/pasid.h | 6 +
drivers/iommu/intel/svm.c | 55 +---
drivers/iommu/iommu.c | 3 +
drivers/ipack/carriers/tpci200.c | 60 +++--
drivers/media/usb/zr364xx/zr364xx.c | 77 ++++--
drivers/mmc/host/dw_mmc.c | 6 +-
drivers/mmc/host/mmci_stm32_sdmmc.c | 7 +-
drivers/mmc/host/sdhci-iproc.c | 21 +-
drivers/mmc/host/sdhci-msm.c | 18 ++
drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 113 +++++---
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 +
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 3 +-
drivers/net/ethernet/intel/iavf/iavf.h | 1 +
drivers/net/ethernet/intel/iavf/iavf_main.c | 1 +
.../net/ethernet/intel/iavf/iavf_virtchnl.c | 47 +++-
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 5 +-
drivers/net/ethernet/qlogic/qede/qede.h | 1 +
drivers/net/ethernet/qlogic/qede/qede_main.c | 8 +
.../ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 4 +-
drivers/net/hamradio/6pack.c | 6 +
drivers/net/mdio/mdio-mux.c | 36 ++-
drivers/net/usb/lan78xx.c | 16 +-
drivers/net/usb/pegasus.c | 108 +++++---
drivers/net/usb/r8152.c | 2 +-
drivers/net/virtio_net.c | 76 ++++--
drivers/net/vrf.c | 4 +
drivers/net/wireless/ath/ath.h | 3 +-
drivers/net/wireless/ath/ath5k/mac80211-ops.c | 2 +-
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 2 +-
drivers/net/wireless/ath/ath9k/hw.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 95 ++++++-
drivers/net/wireless/ath/key.c | 41 +--
drivers/pci/quirks.c | 1 +
drivers/ptp/Kconfig | 3 +-
drivers/scsi/device_handler/scsi_dh_rdac.c | 4 +-
drivers/scsi/megaraid/megaraid_mm.c | 21 +-
drivers/scsi/pm8001/pm8001_sas.c | 32 ++-
drivers/scsi/scsi_scan.c | 3 +-
drivers/scsi/scsi_sysfs.c | 9 +-
drivers/slimbus/messaging.c | 7 +-
drivers/slimbus/qcom-ngd-ctrl.c | 5 +-
drivers/soc/mediatek/mtk-mmsys.c | 4 +-
drivers/spi/spi-mux.c | 8 +
drivers/usb/core/devio.c | 2 +-
drivers/usb/core/message.c | 6 +
drivers/vdpa/Kconfig | 1 +
drivers/vdpa/ifcvf/ifcvf_main.c | 2 +-
drivers/vdpa/mlx5/core/mr.c | 9 -
drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 +-
drivers/vdpa/vdpa.c | 249 +++++++++++++++++-
drivers/vdpa/vdpa_sim/vdpa_sim.c | 2 +-
drivers/vhost/vdpa.c | 3 +-
drivers/vhost/vhost.c | 10 +-
drivers/virtio/virtio.c | 1 +
drivers/virtio/virtio_ring.c | 8 +
fs/btrfs/inode.c | 10 +-
fs/io_uring.c | 16 +-
fs/namespace.c | 6 +-
fs/pipe.c | 15 +-
include/linux/memcontrol.h | 29 +-
include/linux/pipe_fs_i.h | 2 +
include/linux/soc/mediatek/mtk-mmsys.h | 33 +++
include/linux/vdpa.h | 38 ++-
include/linux/virtio.h | 1 +
include/net/flow_offload.h | 12 +-
include/uapi/linux/vdpa.h | 31 +++
kernel/bpf/verifier.c | 1 +
kernel/trace/trace_events_hist.c | 2 +
mm/vmscan.c | 27 +-
net/bluetooth/hidp/core.c | 2 +-
net/dccp/dccp.h | 6 +-
net/openvswitch/vport.c | 1 +
net/sched/sch_cake.c | 2 +-
net/xfrm/xfrm_ipcomp.c | 2 +-
sound/pci/hda/hda_generic.c | 10 +-
sound/pci/hda/patch_realtek.c | 12 +-
sound/pci/hda/patch_via.c | 1 +
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 2 +-
101 files changed, 1290 insertions(+), 467 deletions(-)
create mode 100644 include/uapi/linux/vdpa.h
--
2.30.2
From: Wei Huang <[email protected]>
[ Upstream commit 4aa2691dcbd38ce1c461188799d863398dd2865d ]
Move the instruction decode part out of x86_emulate_instruction() for it
to be used in other places. Also kvm_clear_exception_queue() is moved
inside the if-statement as it doesn't apply when KVM are coming back from
userspace.
Co-developed-by: Bandan Das <[email protected]>
Signed-off-by: Bandan Das <[email protected]>
Signed-off-by: Wei Huang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/x86.c | 62 +++++++++++++++++++++++++++++-----------------
arch/x86/kvm/x86.h | 2 ++
2 files changed, 41 insertions(+), 23 deletions(-)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6ab42cdcb8a4..d5e25bf51f47 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7338,6 +7338,42 @@ static bool is_vmware_backdoor_opcode(struct x86_emulate_ctxt *ctxt)
return false;
}
+/*
+ * Decode to be emulated instruction. Return EMULATION_OK if success.
+ */
+int x86_decode_emulated_instruction(struct kvm_vcpu *vcpu, int emulation_type,
+ void *insn, int insn_len)
+{
+ int r = EMULATION_OK;
+ struct x86_emulate_ctxt *ctxt = vcpu->arch.emulate_ctxt;
+
+ init_emulate_ctxt(vcpu);
+
+ /*
+ * We will reenter on the same instruction since we do not set
+ * complete_userspace_io. This does not handle watchpoints yet,
+ * those would be handled in the emulate_ops.
+ */
+ if (!(emulation_type & EMULTYPE_SKIP) &&
+ kvm_vcpu_check_breakpoint(vcpu, &r))
+ return r;
+
+ ctxt->interruptibility = 0;
+ ctxt->have_exception = false;
+ ctxt->exception.vector = -1;
+ ctxt->perm_ok = false;
+
+ ctxt->ud = emulation_type & EMULTYPE_TRAP_UD;
+
+ r = x86_decode_insn(ctxt, insn, insn_len);
+
+ trace_kvm_emulate_insn_start(vcpu);
+ ++vcpu->stat.insn_emulation;
+
+ return r;
+}
+EXPORT_SYMBOL_GPL(x86_decode_emulated_instruction);
+
int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
int emulation_type, void *insn, int insn_len)
{
@@ -7357,32 +7393,12 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
*/
write_fault_to_spt = vcpu->arch.write_fault_to_shadow_pgtable;
vcpu->arch.write_fault_to_shadow_pgtable = false;
- kvm_clear_exception_queue(vcpu);
if (!(emulation_type & EMULTYPE_NO_DECODE)) {
- init_emulate_ctxt(vcpu);
-
- /*
- * We will reenter on the same instruction since
- * we do not set complete_userspace_io. This does not
- * handle watchpoints yet, those would be handled in
- * the emulate_ops.
- */
- if (!(emulation_type & EMULTYPE_SKIP) &&
- kvm_vcpu_check_breakpoint(vcpu, &r))
- return r;
-
- ctxt->interruptibility = 0;
- ctxt->have_exception = false;
- ctxt->exception.vector = -1;
- ctxt->perm_ok = false;
-
- ctxt->ud = emulation_type & EMULTYPE_TRAP_UD;
-
- r = x86_decode_insn(ctxt, insn, insn_len);
+ kvm_clear_exception_queue(vcpu);
- trace_kvm_emulate_insn_start(vcpu);
- ++vcpu->stat.insn_emulation;
+ r = x86_decode_emulated_instruction(vcpu, emulation_type,
+ insn, insn_len);
if (r != EMULATION_OK) {
if ((emulation_type & EMULTYPE_TRAP_UD) ||
(emulation_type & EMULTYPE_TRAP_UD_FORCED)) {
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 2249a7d7ca27..2bff44f1efec 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -272,6 +272,8 @@ bool kvm_mtrr_check_gfn_range_consistency(struct kvm_vcpu *vcpu, gfn_t gfn,
int page_num);
bool kvm_vector_hashing_enabled(void);
void kvm_fixup_and_inject_pf_error(struct kvm_vcpu *vcpu, gva_t gva, u16 error_code);
+int x86_decode_emulated_instruction(struct kvm_vcpu *vcpu, int emulation_type,
+ void *insn, int insn_len);
int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
int emulation_type, void *insn, int insn_len);
fastpath_t handle_fastpath_set_msr_irqoff(struct kvm_vcpu *vcpu);
--
2.30.2
From: Evgeny Novikov <[email protected]>
[ Upstream commit af0321a5be3e5647441eb6b79355beaa592df97a ]
zr364xx_start_readpipe() can fail but callers do not care about that.
This can result in various negative consequences. The patch adds missed
error handling.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/zr364xx/zr364xx.c | 31 ++++++++++++++++++++++-------
1 file changed, 24 insertions(+), 7 deletions(-)
diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c
index 1b79053b2a05..5c8997d7de23 100644
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -1328,6 +1328,7 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
{
struct zr364xx_pipeinfo *pipe = cam->pipe;
unsigned long i;
+ int err;
DBG("board init: %p\n", cam);
memset(pipe, 0, sizeof(*pipe));
@@ -1360,9 +1361,8 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
if (i == 0) {
printk(KERN_INFO KBUILD_MODNAME ": out of memory. Aborting\n");
- kfree(cam->pipe->transfer_buffer);
- cam->pipe->transfer_buffer = NULL;
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err_free;
} else
cam->buffer.dwFrames = i;
@@ -1377,9 +1377,17 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
/*** end create system buffers ***/
/* start read pipe */
- zr364xx_start_readpipe(cam);
+ err = zr364xx_start_readpipe(cam);
+ if (err)
+ goto err_free;
+
DBG(": board initialized\n");
return 0;
+
+err_free:
+ kfree(cam->pipe->transfer_buffer);
+ cam->pipe->transfer_buffer = NULL;
+ return err;
}
static int zr364xx_probe(struct usb_interface *intf,
@@ -1576,10 +1584,19 @@ static int zr364xx_resume(struct usb_interface *intf)
if (!cam->was_streaming)
return 0;
- zr364xx_start_readpipe(cam);
+ res = zr364xx_start_readpipe(cam);
+ if (res)
+ return res;
+
res = zr364xx_prepare(cam);
- if (!res)
- zr364xx_start_acquire(cam);
+ if (res)
+ goto err_prepare;
+
+ zr364xx_start_acquire(cam);
+ return 0;
+
+err_prepare:
+ zr364xx_stop_readpipe(cam);
return res;
}
#endif
--
2.30.2
From: Alan Stern <[email protected]>
[ Upstream commit b0863f1927323110e3d0d69f6adb6a91018a9a3c ]
When the user submits a control URB via usbfs, the user supplies the
bRequestType value and the kernel uses it to compute the pipe value.
However, do_proc_control() performs this computation incorrectly in
the case where the bRequestType direction bit is set to USB_DIR_IN and
the URB's transfer length is 0: The pipe's direction is also set to IN
but it should be OUT, which is the direction the actual transfer will
use regardless of bRequestType.
Commit 5cc59c418fde ("USB: core: WARN if pipe direction != setup
packet direction") added a check to compare the direction bit in the
pipe value to a control URB's actual direction and to WARN if they are
different. This can be triggered by the incorrect computation
mentioned above, as found by syzbot.
This patch fixes the computation, thus avoiding the WARNing.
Reported-and-tested-by: [email protected]
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/devio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 2218941d35a3..73b60f013b20 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1133,7 +1133,7 @@ static int do_proc_control(struct usb_dev_state *ps,
"wIndex=%04x wLength=%04x\n",
ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
ctrl->wIndex, ctrl->wLength);
- if (ctrl->bRequestType & 0x80) {
+ if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) {
pipe = usb_rcvctrlpipe(dev, 0);
snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT, NULL, 0);
--
2.30.2
From: Harshvardhan Jha <[email protected]>
[ Upstream commit 480e93e12aa04d857f7cc2e6fcec181c0d690404 ]
The list_for_each_entry() iterator, "pos" in this code, can never be
NULL so the warning will never be printed.
Signed-off-by: Harshvardhan Jha <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_ipcomp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/xfrm/xfrm_ipcomp.c b/net/xfrm/xfrm_ipcomp.c
index 4d422447aadc..0814320472f1 100644
--- a/net/xfrm/xfrm_ipcomp.c
+++ b/net/xfrm/xfrm_ipcomp.c
@@ -250,7 +250,7 @@ static void ipcomp_free_tfms(struct crypto_comp * __percpu *tfms)
break;
}
- WARN_ON(!pos);
+ WARN_ON(list_entry_is_head(pos, &ipcomp_tfms_list, list));
if (--pos->users)
return;
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit ea354b6ddd6f09be29424f41fa75a3e637fea234 ]
Syzbot discovered that the probe error handling doesn't clean up the
resources allocated in zr364xx_board_init(). There are several
related bugs in this code so I have re-written the error handling.
1) Introduce a new function zr364xx_board_uninit() which cleans up
the resources in zr364xx_board_init().
2) In zr364xx_board_init() if the call to zr364xx_start_readpipe()
fails then release the "cam->buffer.frame[i].lpvbits" memory
before returning. This way every function either allocates
everything successfully or it cleans up after itself.
3) Re-write the probe function so that each failure path goto frees
the most recent allocation. That way we don't free anything
before it has been allocated and we can also verify that
everything is freed.
4) Originally, in the probe function the "cam->v4l2_dev.release"
pointer was set to "zr364xx_release" near the start but I moved
that assignment to the end, after everything had succeeded. The
release function was never actually called during the probe cleanup
process, but with this change I wanted to make it clear that we
don't want to call zr364xx_release() until everything is
allocated successfully.
Next I re-wrote the zr364xx_release() function. Ideally this would
have been a simple matter of copy and pasting the cleanup code from
probe and adding an additional call to video_unregister_device(). But
there are a couple quirks to note.
1) The probe function does not call videobuf_mmap_free() and I don't
know where the videobuf_mmap is allocated. I left the code as-is to
avoid introducing a bug in code I don't understand.
2) The zr364xx_board_uninit() has a call to zr364xx_stop_readpipe()
which is a change from the original behavior with regards to
unloading the driver. Calling zr364xx_stop_readpipe() on a stopped
pipe is not a problem so this is safe and is potentially a bugfix.
Reported-by: [email protected]
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/zr364xx/zr364xx.c | 49 ++++++++++++++++++-----------
1 file changed, 31 insertions(+), 18 deletions(-)
diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c
index 5c8997d7de23..8636acf2dad0 100644
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -1184,15 +1184,11 @@ out:
return err;
}
-static void zr364xx_release(struct v4l2_device *v4l2_dev)
+static void zr364xx_board_uninit(struct zr364xx_camera *cam)
{
- struct zr364xx_camera *cam =
- container_of(v4l2_dev, struct zr364xx_camera, v4l2_dev);
unsigned long i;
- v4l2_device_unregister(&cam->v4l2_dev);
-
- videobuf_mmap_free(&cam->vb_vidq);
+ zr364xx_stop_readpipe(cam);
/* release sys buffers */
for (i = 0; i < FRAMES; i++) {
@@ -1203,9 +1199,19 @@ static void zr364xx_release(struct v4l2_device *v4l2_dev)
cam->buffer.frame[i].lpvbits = NULL;
}
- v4l2_ctrl_handler_free(&cam->ctrl_handler);
/* release transfer buffer */
kfree(cam->pipe->transfer_buffer);
+}
+
+static void zr364xx_release(struct v4l2_device *v4l2_dev)
+{
+ struct zr364xx_camera *cam =
+ container_of(v4l2_dev, struct zr364xx_camera, v4l2_dev);
+
+ videobuf_mmap_free(&cam->vb_vidq);
+ v4l2_ctrl_handler_free(&cam->ctrl_handler);
+ zr364xx_board_uninit(cam);
+ v4l2_device_unregister(&cam->v4l2_dev);
kfree(cam);
}
@@ -1379,11 +1385,14 @@ static int zr364xx_board_init(struct zr364xx_camera *cam)
/* start read pipe */
err = zr364xx_start_readpipe(cam);
if (err)
- goto err_free;
+ goto err_free_frames;
DBG(": board initialized\n");
return 0;
+err_free_frames:
+ for (i = 0; i < FRAMES; i++)
+ vfree(cam->buffer.frame[i].lpvbits);
err_free:
kfree(cam->pipe->transfer_buffer);
cam->pipe->transfer_buffer = NULL;
@@ -1412,12 +1421,10 @@ static int zr364xx_probe(struct usb_interface *intf,
if (!cam)
return -ENOMEM;
- cam->v4l2_dev.release = zr364xx_release;
err = v4l2_device_register(&intf->dev, &cam->v4l2_dev);
if (err < 0) {
dev_err(&udev->dev, "couldn't register v4l2_device\n");
- kfree(cam);
- return err;
+ goto free_cam;
}
hdl = &cam->ctrl_handler;
v4l2_ctrl_handler_init(hdl, 1);
@@ -1426,7 +1433,7 @@ static int zr364xx_probe(struct usb_interface *intf,
if (hdl->error) {
err = hdl->error;
dev_err(&udev->dev, "couldn't register control\n");
- goto fail;
+ goto unregister;
}
/* save the init method used by this camera */
cam->method = id->driver_info;
@@ -1499,7 +1506,7 @@ static int zr364xx_probe(struct usb_interface *intf,
if (!cam->read_endpoint) {
err = -ENOMEM;
dev_err(&intf->dev, "Could not find bulk-in endpoint\n");
- goto fail;
+ goto unregister;
}
/* v4l */
@@ -1510,10 +1517,11 @@ static int zr364xx_probe(struct usb_interface *intf,
/* load zr364xx board specific */
err = zr364xx_board_init(cam);
- if (!err)
- err = v4l2_ctrl_handler_setup(hdl);
if (err)
- goto fail;
+ goto unregister;
+ err = v4l2_ctrl_handler_setup(hdl);
+ if (err)
+ goto board_uninit;
spin_lock_init(&cam->slock);
@@ -1528,16 +1536,21 @@ static int zr364xx_probe(struct usb_interface *intf,
err = video_register_device(&cam->vdev, VFL_TYPE_VIDEO, -1);
if (err) {
dev_err(&udev->dev, "video_register_device failed\n");
- goto fail;
+ goto free_handler;
}
+ cam->v4l2_dev.release = zr364xx_release;
dev_info(&udev->dev, DRIVER_DESC " controlling device %s\n",
video_device_node_name(&cam->vdev));
return 0;
-fail:
+free_handler:
v4l2_ctrl_handler_free(hdl);
+board_uninit:
+ zr364xx_board_uninit(cam);
+unregister:
v4l2_device_unregister(&cam->v4l2_dev);
+free_cam:
kfree(cam);
return err;
}
--
2.30.2
From: Dave Gerlach <[email protected]>
[ Upstream commit 20a6b3fd8e2e2c063b25fbf2ee74d86b898e5087 ]
Based on the latest timing specifications for the TPS65218 from the data
sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206
from November 2014, we must change the i2c bus speed to better fit within
the minimum high SCL time required for proper i2c transfer.
When running at 400khz, measurements show that SCL spends
0.8125 uS/1.666 uS high/low which violates the requirement for minimum
high period of SCL provided in datasheet Table 7.6 which is 1 uS.
Switching to 100khz gives us 5 uS/5 uS high/low which both fall above
the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low.
Without this patch occasionally a voltage set operation from the kernel
will appear to have worked but the actual voltage reflected on the PMIC
will not have updated, causing problems especially with cpufreq that may
update to a higher OPP without actually raising the voltage on DCDC2,
leading to a hang.
Signed-off-by: Dave Gerlach <[email protected]>
Signed-off-by: Kevin Hilman <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 8b696107eef8..d2aebdbc7e0f 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -582,7 +582,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
tps65218: tps65218@24 {
reg = <0x24>;
--
2.30.2
From: Adrian Larumbe <[email protected]>
[ Upstream commit 7dd2dd4ff9f3abda601f22b9d01441a0869d20d7 ]
When user calls dmaengine_terminate_sync, the driver will clean up any
remaining descriptors for all the pending or active transfers that had
previously been submitted. However, this might happen whilst the tasklet is
invoking the DMA callback for the last finished transfer, so by the time it
returns and takes over the channel's spinlock, the list of completed
descriptors it was traversing is no longer valid. This leads to a
read-after-free situation.
Fix it by signalling whether a user-triggered termination has happened by
means of a boolean variable.
Signed-off-by: Adrian Larumbe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/xilinx/xilinx_dma.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 79777550a6ff..9ffdbeec436b 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -394,6 +394,7 @@ struct xilinx_dma_tx_descriptor {
* @genlock: Support genlock mode
* @err: Channel has errors
* @idle: Check for channel idle
+ * @terminating: Check for channel being synchronized by user
* @tasklet: Cleanup work after irq
* @config: Device configuration info
* @flush_on_fsync: Flush on Frame sync
@@ -431,6 +432,7 @@ struct xilinx_dma_chan {
bool genlock;
bool err;
bool idle;
+ bool terminating;
struct tasklet_struct tasklet;
struct xilinx_vdma_config config;
bool flush_on_fsync;
@@ -1049,6 +1051,13 @@ static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
/* Run any dependencies, then free the descriptor */
dma_run_dependencies(&desc->async_tx);
xilinx_dma_free_tx_descriptor(chan, desc);
+
+ /*
+ * While we ran a callback the user called a terminate function,
+ * which takes care of cleaning up any remaining descriptors
+ */
+ if (chan->terminating)
+ break;
}
spin_unlock_irqrestore(&chan->lock, flags);
@@ -1965,6 +1974,8 @@ static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
if (desc->cyclic)
chan->cyclic = true;
+ chan->terminating = false;
+
spin_unlock_irqrestore(&chan->lock, flags);
return cookie;
@@ -2436,6 +2447,7 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)
xilinx_dma_chan_reset(chan);
/* Remove and free all of the descriptors in the lists */
+ chan->terminating = true;
xilinx_dma_free_descriptors(chan);
chan->idle = true;
--
2.30.2
From: Jouni Malinen <[email protected]>
commit ca2848022c12789685d3fab3227df02b863f9696 upstream.
Do not delete a key cache entry that is still being referenced by
pending frames in TXQs. This avoids reuse of the key cache entry while a
frame might still be transmitted using it.
To avoid having to do any additional operations during the main TX path
operations, track pending key cache entries in a new bitmap and check
whether any pending entries can be deleted before every new key
add/remove operation. Also clear any remaining entries when stopping the
interface.
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/hw.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 87 ++++++++++++++++++++++++++-
2 files changed, 87 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 023599e10dd5..b7b65b1c90e8 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -820,6 +820,7 @@ struct ath_hw {
struct ath9k_pacal_info pacal_info;
struct ar5416Stats stats;
struct ath9k_tx_queue_info txq[ATH9K_NUM_TX_QUEUES];
+ DECLARE_BITMAP(pending_del_keymap, ATH_KEYMAX);
enum ath9k_int imask;
u32 imrs2_reg;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9fd3dc66d17a..5739c1dbf166 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -826,12 +826,80 @@ exit:
ieee80211_free_txskb(hw, skb);
}
+static bool ath9k_txq_list_has_key(struct list_head *txq_list, u32 keyix)
+{
+ struct ath_buf *bf;
+ struct ieee80211_tx_info *txinfo;
+ struct ath_frame_info *fi;
+
+ list_for_each_entry(bf, txq_list, list) {
+ if (bf->bf_state.stale || !bf->bf_mpdu)
+ continue;
+
+ txinfo = IEEE80211_SKB_CB(bf->bf_mpdu);
+ fi = (struct ath_frame_info *)&txinfo->rate_driver_data[0];
+ if (fi->keyix == keyix)
+ return true;
+ }
+
+ return false;
+}
+
+static bool ath9k_txq_has_key(struct ath_softc *sc, u32 keyix)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ int i;
+ struct ath_txq *txq;
+ bool key_in_use = false;
+
+ for (i = 0; !key_in_use && i < ATH9K_NUM_TX_QUEUES; i++) {
+ if (!ATH_TXQ_SETUP(sc, i))
+ continue;
+ txq = &sc->tx.txq[i];
+ if (!txq->axq_depth)
+ continue;
+ if (!ath9k_hw_numtxpending(ah, txq->axq_qnum))
+ continue;
+
+ ath_txq_lock(sc, txq);
+ key_in_use = ath9k_txq_list_has_key(&txq->axq_q, keyix);
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
+ int idx = txq->txq_tailidx;
+
+ while (!key_in_use &&
+ !list_empty(&txq->txq_fifo[idx])) {
+ key_in_use = ath9k_txq_list_has_key(
+ &txq->txq_fifo[idx], keyix);
+ INCR(idx, ATH_TXFIFO_DEPTH);
+ }
+ }
+ ath_txq_unlock(sc, txq);
+ }
+
+ return key_in_use;
+}
+
+static void ath9k_pending_key_del(struct ath_softc *sc, u8 keyix)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if (!test_bit(keyix, ah->pending_del_keymap) ||
+ ath9k_txq_has_key(sc, keyix))
+ return;
+
+ /* No more TXQ frames point to this key cache entry, so delete it. */
+ clear_bit(keyix, ah->pending_del_keymap);
+ ath_key_delete(common, keyix);
+}
+
static void ath9k_stop(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
bool prev_idle;
+ int i;
ath9k_deinit_channel_context(sc);
@@ -899,6 +967,9 @@ static void ath9k_stop(struct ieee80211_hw *hw)
spin_unlock_bh(&sc->sc_pcu_lock);
+ for (i = 0; i < ATH_KEYMAX; i++)
+ ath9k_pending_key_del(sc, i);
+
/* Clear key cache entries explicitly to get rid of any potentially
* remaining keys.
*/
@@ -1728,6 +1799,12 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
if (sta)
an = (struct ath_node *)sta->drv_priv;
+ /* Delete pending key cache entries if no more frames are pointing to
+ * them in TXQs.
+ */
+ for (i = 0; i < ATH_KEYMAX; i++)
+ ath9k_pending_key_del(sc, i);
+
switch (cmd) {
case SET_KEY:
if (sta)
@@ -1757,7 +1834,15 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
}
break;
case DISABLE_KEY:
- ath_key_delete(common, key->hw_key_idx);
+ if (ath9k_txq_has_key(sc, key->hw_key_idx)) {
+ /* Delay key cache entry deletion until there are no
+ * remaining TXQ frames pointing to this entry.
+ */
+ set_bit(key->hw_key_idx, sc->sc_ah->pending_del_keymap);
+ ath_hw_keysetmac(common, key->hw_key_idx, NULL);
+ } else {
+ ath_key_delete(common, key->hw_key_idx);
+ }
if (an) {
for (i = 0; i < ARRAY_SIZE(an->key_idx); i++) {
if (an->key_idx[i] != key->hw_key_idx)
--
2.30.2
From: Alan Stern <[email protected]>
[ Upstream commit 60dfe484cef45293e631b3a6e8995f1689818172 ]
The USB core has utility routines to retrieve various types of
descriptors. These routines will now provoke a WARN if they are asked
to retrieve 0 bytes (USB "receive" requests must not have zero
length), so avert this by checking the size argument at the start.
CC: Johan Hovold <[email protected]>
Reported-and-tested-by: [email protected]
Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/message.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 19ebb542befc..dba2baca486e 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -785,6 +785,9 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type,
int i;
int result;
+ if (size <= 0) /* No point in asking for no data */
+ return -EINVAL;
+
memset(buf, 0, size); /* Make sure we parse really received data */
for (i = 0; i < 3; ++i) {
@@ -833,6 +836,9 @@ static int usb_get_string(struct usb_device *dev, unsigned short langid,
int i;
int result;
+ if (size <= 0) /* No point in asking for no data */
+ return -EINVAL;
+
for (i = 0; i < 3; ++i) {
/* retry on length 0 or stall; some devices are flakey */
result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit 9c39be40c0155c43343f53e3a439290c0fec5542 ]
syzbot reported memory leak in zr364xx_probe()[1].
The problem was in invalid error handling order.
All error conditions rigth after v4l2_ctrl_handler_init()
must call v4l2_ctrl_handler_free().
Reported-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/zr364xx/zr364xx.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c
index 8636acf2dad0..08b86b22e5e8 100644
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -1433,7 +1433,7 @@ static int zr364xx_probe(struct usb_interface *intf,
if (hdl->error) {
err = hdl->error;
dev_err(&udev->dev, "couldn't register control\n");
- goto unregister;
+ goto free_hdlr_and_unreg_dev;
}
/* save the init method used by this camera */
cam->method = id->driver_info;
@@ -1506,7 +1506,7 @@ static int zr364xx_probe(struct usb_interface *intf,
if (!cam->read_endpoint) {
err = -ENOMEM;
dev_err(&intf->dev, "Could not find bulk-in endpoint\n");
- goto unregister;
+ goto free_hdlr_and_unreg_dev;
}
/* v4l */
@@ -1518,7 +1518,7 @@ static int zr364xx_probe(struct usb_interface *intf,
/* load zr364xx board specific */
err = zr364xx_board_init(cam);
if (err)
- goto unregister;
+ goto free_hdlr_and_unreg_dev;
err = v4l2_ctrl_handler_setup(hdl);
if (err)
goto board_uninit;
@@ -1536,7 +1536,7 @@ static int zr364xx_probe(struct usb_interface *intf,
err = video_register_device(&cam->vdev, VFL_TYPE_VIDEO, -1);
if (err) {
dev_err(&udev->dev, "video_register_device failed\n");
- goto free_handler;
+ goto board_uninit;
}
cam->v4l2_dev.release = zr364xx_release;
@@ -1544,11 +1544,10 @@ static int zr364xx_probe(struct usb_interface *intf,
video_device_node_name(&cam->vdev));
return 0;
-free_handler:
- v4l2_ctrl_handler_free(hdl);
board_uninit:
zr364xx_board_uninit(cam);
-unregister:
+free_hdlr_and_unreg_dev:
+ v4l2_ctrl_handler_free(hdl);
v4l2_device_unregister(&cam->v4l2_dev);
free_cam:
kfree(cam);
--
2.30.2
From: "Ivan T. Ivanov" <[email protected]>
[ Upstream commit 6b67d4d63edece1033972214704c04f36c5be89a ]
Currently phy_device state could be left in inconsistent state shown
by following alert message[1]. This is because phy_read_status could
be called concurrently from lan78xx_delayedwork, phy_state_machine and
__ethtool_get_link. Fix this by making sure that phy_device state is
updated atomically.
[1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1)
Signed-off-by: Ivan T. Ivanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/lan78xx.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 65b315bc60ab..a5cd42bae962 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1159,7 +1159,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
{
struct phy_device *phydev = dev->net->phydev;
struct ethtool_link_ksettings ecmd;
- int ladv, radv, ret;
+ int ladv, radv, ret, link;
u32 buf;
/* clear LAN78xx interrupt status */
@@ -1167,9 +1167,12 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
if (unlikely(ret < 0))
return -EIO;
+ mutex_lock(&phydev->lock);
phy_read_status(phydev);
+ link = phydev->link;
+ mutex_unlock(&phydev->lock);
- if (!phydev->link && dev->link_on) {
+ if (!link && dev->link_on) {
dev->link_on = false;
/* reset MAC */
@@ -1182,7 +1185,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
return -EIO;
del_timer(&dev->stat_monitor);
- } else if (phydev->link && !dev->link_on) {
+ } else if (link && !dev->link_on) {
dev->link_on = true;
phy_ethtool_ksettings_get(phydev, &ecmd);
@@ -1471,9 +1474,14 @@ static int lan78xx_set_eee(struct net_device *net, struct ethtool_eee *edata)
static u32 lan78xx_get_link(struct net_device *net)
{
+ u32 link;
+
+ mutex_lock(&net->phydev->lock);
phy_read_status(net->phydev);
+ link = net->phydev->link;
+ mutex_unlock(&net->phydev->lock);
- return net->phydev->link;
+ return link;
}
static void lan78xx_get_drvinfo(struct net_device *net,
--
2.30.2
From: Petko Manolov <[email protected]>
[ Upstream commit 8a160e2e9aeb8318159b48701ad8a6e22274372d ]
Certain call sites of get_geristers() did not do proper error handling. This
could be a problem as get_geristers() typically return the data via pointer to a
buffer. If an error occurred the code is carelessly manipulating the wrong data.
Signed-off-by: Petko Manolov <[email protected]>
Reviewed-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/pegasus.c | 108 ++++++++++++++++++++++++++------------
1 file changed, 75 insertions(+), 33 deletions(-)
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 0d7935924e58..fb1a8c4486dd 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -132,9 +132,15 @@ static int get_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data)
static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size,
const void *data)
{
- return usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REGS,
+ int ret;
+
+ ret = usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REGS,
PEGASUS_REQT_WRITE, 0, indx, data, size,
1000, GFP_NOIO);
+ if (ret < 0)
+ netif_dbg(pegasus, drv, pegasus->net, "%s failed with %d\n", __func__, ret);
+
+ return ret;
}
/*
@@ -145,10 +151,15 @@ static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size,
static int set_register(pegasus_t *pegasus, __u16 indx, __u8 data)
{
void *buf = &data;
+ int ret;
- return usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REG,
+ ret = usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REG,
PEGASUS_REQT_WRITE, data, indx, buf, 1,
1000, GFP_NOIO);
+ if (ret < 0)
+ netif_dbg(pegasus, drv, pegasus->net, "%s failed with %d\n", __func__, ret);
+
+ return ret;
}
static int update_eth_regs_async(pegasus_t *pegasus)
@@ -188,10 +199,9 @@ static int update_eth_regs_async(pegasus_t *pegasus)
static int __mii_op(pegasus_t *p, __u8 phy, __u8 indx, __u16 *regd, __u8 cmd)
{
- int i;
- __u8 data[4] = { phy, 0, 0, indx };
+ int i, ret;
__le16 regdi;
- int ret = -ETIMEDOUT;
+ __u8 data[4] = { phy, 0, 0, indx };
if (cmd & PHY_WRITE) {
__le16 *t = (__le16 *) & data[1];
@@ -207,12 +217,15 @@ static int __mii_op(pegasus_t *p, __u8 phy, __u8 indx, __u16 *regd, __u8 cmd)
if (data[0] & PHY_DONE)
break;
}
- if (i >= REG_TIMEOUT)
+ if (i >= REG_TIMEOUT) {
+ ret = -ETIMEDOUT;
goto fail;
+ }
if (cmd & PHY_READ) {
ret = get_registers(p, PhyData, 2, ®di);
+ if (ret < 0)
+ goto fail;
*regd = le16_to_cpu(regdi);
- return ret;
}
return 0;
fail:
@@ -235,9 +248,13 @@ static int write_mii_word(pegasus_t *pegasus, __u8 phy, __u8 indx, __u16 *regd)
static int mdio_read(struct net_device *dev, int phy_id, int loc)
{
pegasus_t *pegasus = netdev_priv(dev);
+ int ret;
u16 res;
- read_mii_word(pegasus, phy_id, loc, &res);
+ ret = read_mii_word(pegasus, phy_id, loc, &res);
+ if (ret < 0)
+ return ret;
+
return (int)res;
}
@@ -251,10 +268,9 @@ static void mdio_write(struct net_device *dev, int phy_id, int loc, int val)
static int read_eprom_word(pegasus_t *pegasus, __u8 index, __u16 *retdata)
{
- int i;
- __u8 tmp = 0;
+ int ret, i;
__le16 retdatai;
- int ret;
+ __u8 tmp = 0;
set_register(pegasus, EpromCtrl, 0);
set_register(pegasus, EpromOffset, index);
@@ -262,21 +278,25 @@ static int read_eprom_word(pegasus_t *pegasus, __u8 index, __u16 *retdata)
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+ if (ret < 0)
+ goto fail;
if (tmp & EPROM_DONE)
break;
- if (ret == -ESHUTDOWN)
- goto fail;
}
- if (i >= REG_TIMEOUT)
+ if (i >= REG_TIMEOUT) {
+ ret = -ETIMEDOUT;
goto fail;
+ }
ret = get_registers(pegasus, EpromData, 2, &retdatai);
+ if (ret < 0)
+ goto fail;
*retdata = le16_to_cpu(retdatai);
return ret;
fail:
- netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
- return -ETIMEDOUT;
+ netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+ return ret;
}
#ifdef PEGASUS_WRITE_EEPROM
@@ -324,10 +344,10 @@ static int write_eprom_word(pegasus_t *pegasus, __u8 index, __u16 data)
return ret;
fail:
- netif_warn(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+ netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
return -ETIMEDOUT;
}
-#endif /* PEGASUS_WRITE_EEPROM */
+#endif /* PEGASUS_WRITE_EEPROM */
static inline int get_node_id(pegasus_t *pegasus, u8 *id)
{
@@ -367,19 +387,21 @@ static void set_ethernet_addr(pegasus_t *pegasus)
return;
err:
eth_hw_addr_random(pegasus->net);
- dev_info(&pegasus->intf->dev, "software assigned MAC address.\n");
+ netif_dbg(pegasus, drv, pegasus->net, "software assigned MAC address.\n");
return;
}
static inline int reset_mac(pegasus_t *pegasus)
{
+ int ret, i;
__u8 data = 0x8;
- int i;
set_register(pegasus, EthCtrl1, data);
for (i = 0; i < REG_TIMEOUT; i++) {
- get_registers(pegasus, EthCtrl1, 1, &data);
+ ret = get_registers(pegasus, EthCtrl1, 1, &data);
+ if (ret < 0)
+ goto fail;
if (~data & 0x08) {
if (loopback)
break;
@@ -402,22 +424,29 @@ static inline int reset_mac(pegasus_t *pegasus)
}
if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) {
__u16 auxmode;
- read_mii_word(pegasus, 3, 0x1b, &auxmode);
+ ret = read_mii_word(pegasus, 3, 0x1b, &auxmode);
+ if (ret < 0)
+ goto fail;
auxmode |= 4;
write_mii_word(pegasus, 3, 0x1b, &auxmode);
}
return 0;
+fail:
+ netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+ return ret;
}
static int enable_net_traffic(struct net_device *dev, struct usb_device *usb)
{
- __u16 linkpart;
- __u8 data[4];
pegasus_t *pegasus = netdev_priv(dev);
int ret;
+ __u16 linkpart;
+ __u8 data[4];
- read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart);
+ ret = read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart);
+ if (ret < 0)
+ goto fail;
data[0] = 0xc8; /* TX & RX enable, append status, no CRC */
data[1] = 0;
if (linkpart & (ADVERTISE_100FULL | ADVERTISE_10FULL))
@@ -435,11 +464,16 @@ static int enable_net_traffic(struct net_device *dev, struct usb_device *usb)
usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 ||
usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
u16 auxmode;
- read_mii_word(pegasus, 0, 0x1b, &auxmode);
+ ret = read_mii_word(pegasus, 0, 0x1b, &auxmode);
+ if (ret < 0)
+ goto fail;
auxmode |= 4;
write_mii_word(pegasus, 0, 0x1b, &auxmode);
}
+ return 0;
+fail:
+ netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
return ret;
}
@@ -447,9 +481,9 @@ static void read_bulk_callback(struct urb *urb)
{
pegasus_t *pegasus = urb->context;
struct net_device *net;
+ u8 *buf = urb->transfer_buffer;
int rx_status, count = urb->actual_length;
int status = urb->status;
- u8 *buf = urb->transfer_buffer;
__u16 pkt_len;
if (!pegasus)
@@ -1005,8 +1039,7 @@ static int pegasus_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
data[0] = pegasus->phy;
fallthrough;
case SIOCDEVPRIVATE + 1:
- read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]);
- res = 0;
+ res = read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]);
break;
case SIOCDEVPRIVATE + 2:
if (!capable(CAP_NET_ADMIN))
@@ -1040,22 +1073,25 @@ static void pegasus_set_multicast(struct net_device *net)
static __u8 mii_phy_probe(pegasus_t *pegasus)
{
- int i;
+ int i, ret;
__u16 tmp;
for (i = 0; i < 32; i++) {
- read_mii_word(pegasus, i, MII_BMSR, &tmp);
+ ret = read_mii_word(pegasus, i, MII_BMSR, &tmp);
+ if (ret < 0)
+ goto fail;
if (tmp == 0 || tmp == 0xffff || (tmp & BMSR_MEDIA) == 0)
continue;
else
return i;
}
-
+fail:
return 0xff;
}
static inline void setup_pegasus_II(pegasus_t *pegasus)
{
+ int ret;
__u8 data = 0xa5;
set_register(pegasus, Reg1d, 0);
@@ -1067,7 +1103,9 @@ static inline void setup_pegasus_II(pegasus_t *pegasus)
set_register(pegasus, Reg7b, 2);
set_register(pegasus, 0x83, data);
- get_registers(pegasus, 0x83, 1, &data);
+ ret = get_registers(pegasus, 0x83, 1, &data);
+ if (ret < 0)
+ goto fail;
if (data == 0xa5)
pegasus->chip = 0x8513;
@@ -1082,6 +1120,10 @@ static inline void setup_pegasus_II(pegasus_t *pegasus)
set_register(pegasus, Reg81, 6);
else
set_register(pegasus, Reg81, 2);
+
+ return;
+fail:
+ netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
}
static void check_carrier(struct work_struct *work)
--
2.30.2
From: Jouni Malinen <[email protected]>
commit d2d3e36498dd8e0c83ea99861fac5cf9e8671226 upstream.
ath9k is going to use this for safer management of key cache entries.
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath.h | 1 +
drivers/net/wireless/ath/key.c | 4 ++--
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index 7a364eca46d6..9d18105c449f 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -203,6 +203,7 @@ int ath_key_config(struct ath_common *common,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key);
bool ath_hw_keyreset(struct ath_common *common, u16 entry);
+bool ath_hw_keysetmac(struct ath_common *common, u16 entry, const u8 *mac);
void ath_hw_cycle_counters_update(struct ath_common *common);
int32_t ath_hw_get_listen_time(struct ath_common *common);
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 59618bb41f6c..cb266cf3c77c 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -84,8 +84,7 @@ bool ath_hw_keyreset(struct ath_common *common, u16 entry)
}
EXPORT_SYMBOL(ath_hw_keyreset);
-static bool ath_hw_keysetmac(struct ath_common *common,
- u16 entry, const u8 *mac)
+bool ath_hw_keysetmac(struct ath_common *common, u16 entry, const u8 *mac)
{
u32 macHi, macLo;
u32 unicast_flag = AR_KEYTABLE_VALID;
@@ -125,6 +124,7 @@ static bool ath_hw_keysetmac(struct ath_common *common,
return true;
}
+EXPORT_SYMBOL(ath_hw_keysetmac);
static bool ath_hw_set_keycache_entry(struct ath_common *common, u16 entry,
const struct ath_keyval *k,
--
2.30.2
From: Jouni Malinen <[email protected]>
commit 73488cb2fa3bb1ef9f6cf0d757f76958bd4deaca upstream.
Now that ath/key.c may not be explicitly clearing keys from the key
cache, clear all key cache entries when disabling hardware to make sure
no keys are left behind beyond this point.
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/main.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index ac805f56627a..7d933fd8e5bb 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -899,6 +899,11 @@ static void ath9k_stop(struct ieee80211_hw *hw)
spin_unlock_bh(&sc->sc_pcu_lock);
+ /* Clear key cache entries explicitly to get rid of any potentially
+ * remaining keys.
+ */
+ ath9k_cmn_init_crypto(sc->sc_ah);
+
ath9k_ps_restore(sc);
sc->ps_idle = prev_idle;
--
2.30.2
From: Wanpeng Li <[email protected]>
[ Upstream commit da6393cdd8aaa354b3a2437cd73ebb34cac958e3 ]
Reported by syzkaller:
WARNING: CPU: 7 PID: 10526 at linux/arch/x86/kvm//x86.c:7621 x86_emulate_instruction+0x41b/0x510 [kvm]
RIP: 0010:x86_emulate_instruction+0x41b/0x510 [kvm]
Call Trace:
kvm_mmu_page_fault+0x126/0x8f0 [kvm]
vmx_handle_exit+0x11e/0x680 [kvm_intel]
vcpu_enter_guest+0xd95/0x1b40 [kvm]
kvm_arch_vcpu_ioctl_run+0x377/0x6a0 [kvm]
kvm_vcpu_ioctl+0x389/0x630 [kvm]
__x64_sys_ioctl+0x8e/0xd0
do_syscall_64+0x3c/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Commit 4a1e10d5b5d8 ("KVM: x86: handle hardware breakpoints during emulation())
adds hardware breakpoints check before emulation the instruction and parts of
emulation context initialization, actually we don't have the EMULTYPE_NO_DECODE flag
here and the emulation context will not be reused. Commit c8848cee74ff ("KVM: x86:
set ctxt->have_exception in x86_decode_insn()) triggers the warning because it
catches the stale emulation context has #UD, however, it is not during instruction
decoding which should result in EMULATION_FAILED. This patch fixes it by moving
the second part emulation context initialization into init_emulate_ctxt() and
before hardware breakpoints check. The ctxt->ud will be dropped by a follow-up
patch.
syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=134683fdd00000
Reported-by: [email protected]
Fixes: 4a1e10d5b5d8 (KVM: x86: handle hardware breakpoints during emulation)
Signed-off-by: Wanpeng Li <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/x86.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d5e25bf51f47..812585986bb8 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7023,6 +7023,11 @@ static void init_emulate_ctxt(struct kvm_vcpu *vcpu)
BUILD_BUG_ON(HF_SMM_MASK != X86EMUL_SMM_MASK);
BUILD_BUG_ON(HF_SMM_INSIDE_NMI_MASK != X86EMUL_SMM_INSIDE_NMI_MASK);
+ ctxt->interruptibility = 0;
+ ctxt->have_exception = false;
+ ctxt->exception.vector = -1;
+ ctxt->perm_ok = false;
+
init_decode_cache(ctxt);
vcpu->arch.emulate_regs_need_sync_from_vcpu = false;
}
@@ -7358,11 +7363,6 @@ int x86_decode_emulated_instruction(struct kvm_vcpu *vcpu, int emulation_type,
kvm_vcpu_check_breakpoint(vcpu, &r))
return r;
- ctxt->interruptibility = 0;
- ctxt->have_exception = false;
- ctxt->exception.vector = -1;
- ctxt->perm_ok = false;
-
ctxt->ud = emulation_type & EMULTYPE_TRAP_UD;
r = x86_decode_insn(ctxt, insn, insn_len);
--
2.30.2
From: Sudeep Holla <[email protected]>
[ Upstream commit 47091f473b364c98207c4def197a0ae386fc9af1 ]
Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:
arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml:
intc@10140000: $nodename:0: 'intc@10140000' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@..
Signed-off-by: Sudeep Holla <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Cc: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 4f38aeecadb3..42abea3ea92c 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -755,14 +755,14 @@
status = "disabled";
};
- vica: intc@10140000 {
+ vica: interrupt-controller@10140000 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140000 0x20>;
};
- vicb: intc@10140020 {
+ vicb: interrupt-controller@10140020 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
--
2.30.2
From: Yifan Zhang <[email protected]>
[ Upstream commit 1c0539a6fc8a4a4b77278e35d763073890de96b9 ]
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index fb15e8b5af32..ac3a88197b2f 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1271,6 +1271,16 @@ static bool is_raven_kicker(struct amdgpu_device *adev)
return false;
}
+static bool check_if_enlarge_doorbell_range(struct amdgpu_device *adev)
+{
+ if ((adev->asic_type == CHIP_RENOIR) &&
+ (adev->gfx.me_fw_version >= 0x000000a5) &&
+ (adev->gfx.me_feature_version >= 52))
+ return true;
+ else
+ return false;
+}
+
static void gfx_v9_0_check_if_need_gfxoff(struct amdgpu_device *adev)
{
if (gfx_v9_0_should_disable_gfxoff(adev->pdev))
@@ -3619,7 +3629,16 @@ static int gfx_v9_0_kiq_init_register(struct amdgpu_ring *ring)
if (ring->use_doorbell) {
WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER,
(adev->doorbell_index.kiq * 2) << 2);
- WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
+ /* If GC has entered CGPG, ringing doorbell > first page
+ * doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to
+ * workaround this issue. And this change has to align with firmware
+ * update.
+ */
+ if (check_if_enlarge_doorbell_range(adev))
+ WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
+ (adev->doorbell.size - 4));
+ else
+ WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
(adev->doorbell_index.userqueue_end * 2) << 2);
}
--
2.30.2
From: Sreekanth Reddy <[email protected]>
[ Upstream commit 70edd2e6f652f67d854981fd67f9ad0f1deaea92 ]
Avoid printing a 'target allocation failed' error if the driver
target_alloc() callback function returns -ENXIO. This return value
indicates that the corresponding H:C:T:L entry is empty.
Removing this error reduces the scan time if the user issues SCAN_WILD_CARD
scan operation through sysfs parameter on a host with a lot of empty
H:C:T:L entries.
Avoiding the printk on -ENXIO matches the behavior of the other callback
functions during scanning.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_scan.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 9af50e6f94c4..8e474b145249 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -453,7 +453,8 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
error = shost->hostt->target_alloc(starget);
if(error) {
- dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error);
+ if (error != -ENXIO)
+ dev_err(dev, "target allocation failed, error %d\n", error);
/* don't want scsi_target_reap to do the final
* put because it will be under the host lock */
scsi_target_destroy(starget);
--
2.30.2
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 1d5ccab95f06675a269f4cb223a1e3f6d1ebef42 ]
With the spi device table udev can autoload the spi-mux module in
the presence of an spi-mux device.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-mux.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c
index 37dfc6e82804..9708b7827ff7 100644
--- a/drivers/spi/spi-mux.c
+++ b/drivers/spi/spi-mux.c
@@ -167,10 +167,17 @@ err_put_ctlr:
return ret;
}
+static const struct spi_device_id spi_mux_id[] = {
+ { "spi-mux" },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, spi_mux_id);
+
static const struct of_device_id spi_mux_of_match[] = {
{ .compatible = "spi-mux" },
{ }
};
+MODULE_DEVICE_TABLE(of, spi_mux_of_match);
static struct spi_driver spi_mux_driver = {
.probe = spi_mux_probe,
@@ -178,6 +185,7 @@ static struct spi_driver spi_mux_driver = {
.name = "spi-mux",
.of_match_table = spi_mux_of_match,
},
+ .id_table = spi_mux_id,
};
module_spi_driver(spi_mux_driver);
--
2.30.2
From: lijinlin <[email protected]>
[ Upstream commit f0f82e2476f6adb9c7a0135cfab8091456990c99 ]
After adding physical volumes to a volume group through vgextend, the
kernel will rescan the partitions. This in turn will cause the device
capacity to be queried.
If the device status is set to offline through sysfs at this time, READ
CAPACITY command will return a result which the host byte is
DID_NO_CONNECT, and the capacity of the device will be set to zero in
read_capacity_error(). After setting device status back to running, the
capacity of the device will remain stuck at zero.
Fix this issue by rescanning device when the device state changes to
SDEV_RUNNING.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: lijinlin <[email protected]>
Signed-off-by: Wu Bo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_sysfs.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index d6e344fa33ad..4dcced95c8b4 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -807,11 +807,14 @@ store_state_field(struct device *dev, struct device_attribute *attr,
mutex_lock(&sdev->state_mutex);
ret = scsi_device_set_state(sdev, state);
/*
- * If the device state changes to SDEV_RUNNING, we need to run
- * the queue to avoid I/O hang.
+ * If the device state changes to SDEV_RUNNING, we need to
+ * rescan the device to revalidate it, and run the queue to
+ * avoid I/O hang.
*/
- if (ret == 0 && state == SDEV_RUNNING)
+ if (ret == 0 && state == SDEV_RUNNING) {
+ scsi_rescan_device(dev);
blk_mq_run_hw_queues(sdev->request_queue, true);
+ }
mutex_unlock(&sdev->state_mutex);
return ret == 0 ? count : -EINVAL;
--
2.30.2
From: Harshvardhan Jha <[email protected]>
[ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ]
The list_for_each_entry() iterator, "adapter" in this code, can never be
NULL. If we exit the loop without finding the correct adapter then
"adapter" points invalid memory that is an offset from the list head. This
will eventually lead to memory corruption and presumably a kernel crash.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Sumit Saxena <[email protected]>
Signed-off-by: Harshvardhan Jha <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/megaraid/megaraid_mm.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index 8df53446641a..422b726e2ac1 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -238,7 +238,7 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)
mimd_t mimd;
uint32_t adapno;
int iterator;
-
+ bool is_found;
if (copy_from_user(&mimd, umimd, sizeof(mimd_t))) {
*rval = -EFAULT;
@@ -254,12 +254,16 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval)
adapter = NULL;
iterator = 0;
+ is_found = false;
list_for_each_entry(adapter, &adapters_list_g, list) {
- if (iterator++ == adapno) break;
+ if (iterator++ == adapno) {
+ is_found = true;
+ break;
+ }
}
- if (!adapter) {
+ if (!is_found) {
*rval = -ENODEV;
return NULL;
}
@@ -725,6 +729,7 @@ ioctl_done(uioc_t *kioc)
uint32_t adapno;
int iterator;
mraid_mmadp_t* adapter;
+ bool is_found;
/*
* When the kioc returns from driver, make sure it still doesn't
@@ -747,19 +752,23 @@ ioctl_done(uioc_t *kioc)
iterator = 0;
adapter = NULL;
adapno = kioc->adapno;
+ is_found = false;
con_log(CL_ANN, ( KERN_WARNING "megaraid cmm: completed "
"ioctl that was timedout before\n"));
list_for_each_entry(adapter, &adapters_list_g, list) {
- if (iterator++ == adapno) break;
+ if (iterator++ == adapno) {
+ is_found = true;
+ break;
+ }
}
kioc->timedout = 0;
- if (adapter) {
+ if (is_found)
mraid_mm_dealloc_kioc( adapter, kioc );
- }
+
}
else {
wake_up(&wait_q);
--
2.30.2
From: Igor Pylypiv <[email protected]>
[ Upstream commit d712d3fb484b7fa8d1d57e9ca6f134bb9d8c18b1 ]
The TMF timeout timer may trigger at the same time when the response from a
controller is being handled. When this happens the SAS task may get freed
before the response processing is finished.
Fix this by calling complete() only when SAS_TASK_STATE_DONE is not set.
A similar race condition was fixed in commit b90cd6f2b905 ("scsi: libsas:
fix a race condition when smp task timeout")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Vishakha Channapattan <[email protected]>
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_sas.c | 32 +++++++++++++++-----------------
1 file changed, 15 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 39de9a9360d3..c3bb58885033 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -684,8 +684,7 @@ int pm8001_dev_found(struct domain_device *dev)
void pm8001_task_done(struct sas_task *task)
{
- if (!del_timer(&task->slow_task->timer))
- return;
+ del_timer(&task->slow_task->timer);
complete(&task->slow_task->completion);
}
@@ -693,9 +692,14 @@ static void pm8001_tmf_timedout(struct timer_list *t)
{
struct sas_task_slow *slow = from_timer(slow, t, timer);
struct sas_task *task = slow->task;
+ unsigned long flags;
- task->task_state_flags |= SAS_TASK_STATE_ABORTED;
- complete(&task->slow_task->completion);
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ complete(&task->slow_task->completion);
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
}
#define PM8001_TASK_TIMEOUT 20
@@ -748,13 +752,10 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
}
res = -TMF_RESP_FUNC_FAILED;
/* Even TMF timed out, return direct. */
- if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- pm8001_dbg(pm8001_ha, FAIL,
- "TMF task[%x]timeout.\n",
- tmf->tmf);
- goto ex_err;
- }
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ pm8001_dbg(pm8001_ha, FAIL, "TMF task[%x]timeout.\n",
+ tmf->tmf);
+ goto ex_err;
}
if (task->task_status.resp == SAS_TASK_COMPLETE &&
@@ -834,12 +835,9 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
wait_for_completion(&task->slow_task->completion);
res = TMF_RESP_FUNC_FAILED;
/* Even TMF timed out, return direct. */
- if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- pm8001_dbg(pm8001_ha, FAIL,
- "TMF task timeout.\n");
- goto ex_err;
- }
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ pm8001_dbg(pm8001_ha, FAIL, "TMF task timeout.\n");
+ goto ex_err;
}
if (task->task_status.resp == SAS_TASK_COMPLETE &&
--
2.30.2
From: Andreas Persson <[email protected]>
commit 2394e628738933aa014093d93093030f6232946d upstream.
Erasing an AMD linear flash card (AM29F016D) crashes after the first
sector has been erased. Likewise, writing to it crashes after two bytes
have been written. The reason is a missing check for a null pointer -
the cmdset_priv field is not set for this type of card.
Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register")
Signed-off-by: Andreas Persson <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/DB6P189MB05830B3530B8087476C5CFE4C1159@DB6P189MB0583.EURP189.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index a1f3e1031c3d..96a27e06401f 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -119,7 +119,7 @@ static int cfi_use_status_reg(struct cfi_private *cfi)
struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
u8 poll_mask = CFI_POLL_STATUS_REG | CFI_POLL_DQ;
- return extp->MinorVersion >= '5' &&
+ return extp && extp->MinorVersion >= '5' &&
(extp->SoftwareFeatures & poll_mask) == CFI_POLL_STATUS_REG;
}
--
2.30.2
From: Prabhakar Kushwaha <[email protected]>
[ Upstream commit 1159e25c137422bdc48ee96e3fb014bd942092c6 ]
A crash has been observed if rmmod is done while automatic debug
collection in progress. It is due to a race condition between
both of them.
To fix stop the sp_task during unload to avoid running qede_sp_task
even if they are schedule during removal process.
Signed-off-by: Alok Prasad <[email protected]>
Signed-off-by: Shai Malin <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qede/qede.h | 1 +
drivers/net/ethernet/qlogic/qede/qede_main.c | 8 ++++++++
2 files changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index 3efc5899f656..f313fd730331 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -494,6 +494,7 @@ struct qede_fastpath {
#define QEDE_SP_HW_ERR 4
#define QEDE_SP_ARFS_CONFIG 5
#define QEDE_SP_AER 7
+#define QEDE_SP_DISABLE 8
#ifdef CONFIG_RFS_ACCEL
int qede_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 05e3a3b60269..d9a3c811ac8b 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1006,6 +1006,13 @@ static void qede_sp_task(struct work_struct *work)
struct qede_dev *edev = container_of(work, struct qede_dev,
sp_task.work);
+ /* Disable execution of this deferred work once
+ * qede removal is in progress, this stop any future
+ * scheduling of sp_task.
+ */
+ if (test_bit(QEDE_SP_DISABLE, &edev->sp_flags))
+ return;
+
/* The locking scheme depends on the specific flag:
* In case of QEDE_SP_RECOVERY, acquiring the RTNL lock is required to
* ensure that ongoing flows are ended and new ones are not started.
@@ -1297,6 +1304,7 @@ static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
qede_rdma_dev_remove(edev, (mode == QEDE_REMOVE_RECOVERY));
if (mode != QEDE_REMOVE_RECOVERY) {
+ set_bit(QEDE_SP_DISABLE, &edev->sp_flags);
unregister_netdev(ndev);
cancel_delayed_work_sync(&edev->sp_task);
--
2.30.2
From: Yu Kuai <[email protected]>
[ Upstream commit 1da569fa7ec8cb0591c74aa3050d4ea1397778b4 ]
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by moving the error_pm label above the pm_runtime_put() in
the error path.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/sh/usb-dmac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c
index 8f7ceb698226..1cc06900153e 100644
--- a/drivers/dma/sh/usb-dmac.c
+++ b/drivers/dma/sh/usb-dmac.c
@@ -855,8 +855,8 @@ static int usb_dmac_probe(struct platform_device *pdev)
error:
of_dma_controller_free(pdev->dev.of_node);
- pm_runtime_put(&pdev->dev);
error_pm:
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
--
2.30.2
From: Peter Ujfalusi <[email protected]>
[ Upstream commit eda97cb095f2958bbad55684a6ca3e7d7af0176a ]
If the router_xlate can not find the controller in the available DMA
devices then it should return with -EPORBE_DEFER in a same way as the
of_dma_request_slave_channel() does.
The issue can be reproduced if the event router is registered before the
DMA controller itself and a driver would request for a channel before the
controller is registered.
In of_dma_request_slave_channel():
1. of_dma_find_controller() would find the dma_router
2. ofdma->of_dma_xlate() would fail and returned NULL
3. -ENODEV is returned as error code
with this patch we would return in this case the correct -EPROBE_DEFER and
the client can try to request the channel later.
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/of-dma.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/of-dma.c b/drivers/dma/of-dma.c
index 8a4f608904b9..4be433482053 100644
--- a/drivers/dma/of-dma.c
+++ b/drivers/dma/of-dma.c
@@ -67,8 +67,12 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec,
return NULL;
ofdma_target = of_dma_find_controller(&dma_spec_target);
- if (!ofdma_target)
- return NULL;
+ if (!ofdma_target) {
+ ofdma->dma_router->route_free(ofdma->dma_router->dev,
+ route_data);
+ chan = ERR_PTR(-EPROBE_DEFER);
+ goto err;
+ }
chan = ofdma_target->of_dma_xlate(&dma_spec_target, ofdma_target);
if (IS_ERR_OR_NULL(chan)) {
@@ -79,6 +83,7 @@ static struct dma_chan *of_dma_router_xlate(struct of_phandle_args *dma_spec,
chan->route_data = route_data;
}
+err:
/*
* Need to put the node back since the ofdma->of_dma_route_allocate
* has taken it for generating the new, translated dma_spec
--
2.30.2
From: Ole Bjørn Midtbø <[email protected]>
[ Upstream commit cca342d98bef68151a80b024f7bf5f388d1fbdea ]
A different wait queue was used when removing ctrl_wait than when adding
it. This effectively made the remove operation without locking compared
to other operations on the wait queue ctrl_wait was part of. This caused
issues like below where dead000000000100 is LIST_POISON1 and
dead000000000200 is LIST_POISON2.
list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \
but was dead000000000200. (next=ffffffc03ac77de0).
------------[ cut here ]------------
CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9
...
---[ end trace 0adc2158f0646eac ]---
Call trace:
[<ffffffc000443f78>] __list_add+0x38/0xb0
[<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68
[<ffffffc00020eecc>] __pollwait+0xec/0x100
[<ffffffc000d1556c>] bt_sock_poll+0x74/0x200
[<ffffffc000bdb8a8>] sock_poll+0x110/0x128
[<ffffffc000210378>] do_sys_poll+0x220/0x480
[<ffffffc0002106f0>] SyS_poll+0x80/0x138
[<ffffffc00008510c>] __sys_trace_return+0x0/0x4
Unable to handle kernel paging request at virtual address dead000000000100
...
CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9
...
Call trace:
[<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8
[<ffffffc0000f0818>] __wake_up+0x50/0x70
[<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60
[<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224
[<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298
[<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198
[<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78
[<ffffffc000d29934>] hci_event_packet+0x564/0x2e30
[<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360
[<ffffffc0000c2218>] process_one_work+0x268/0x460
[<ffffffc0000c2678>] worker_thread+0x268/0x480
[<ffffffc0000c94e0>] kthread+0x118/0x128
[<ffffffc000085070>] ret_from_fork+0x10/0x20
---[ end trace 0adc2158f0646ead ]---
Signed-off-by: Ole Bjørn Midtbø <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hidp/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 3b4fa27a44e6..0db48c812662 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -1290,7 +1290,7 @@ static int hidp_session_thread(void *arg)
/* cleanup runtime environment */
remove_wait_queue(sk_sleep(session->intr_sock->sk), &intr_wait);
- remove_wait_queue(sk_sleep(session->intr_sock->sk), &ctrl_wait);
+ remove_wait_queue(sk_sleep(session->ctrl_sock->sk), &ctrl_wait);
wake_up_interruptible(&session->report_queue);
hidp_del_timer(session);
--
2.30.2
From: Bing Guo <[email protected]>
[ Upstream commit 06050a0f01dbac2ca33145ef19a72041206ea983 ]
Why:
In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X
by the number of pipes ODM Combined.
How:
Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the
number of pipes ODM Combined.
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Bing Guo <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
index d8b18c515d06..e3cfb442a062 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
@@ -357,7 +357,7 @@ void optc2_lock_doublebuffer_enable(struct timing_generator *optc)
REG_UPDATE_2(OTG_GLOBAL_CONTROL1,
MASTER_UPDATE_LOCK_DB_X,
- h_blank_start - 200 - 1,
+ (h_blank_start - 200 - 1) / optc1->opp_count,
MASTER_UPDATE_LOCK_DB_Y,
v_blank_start - 1);
}
--
2.30.2
From: Ye Bin <[email protected]>
[ Upstream commit bc546c0c9abb3bb2fb46866b3d1e6ade9695a5f6 ]
The following BUG_ON() was observed during RDAC scan:
[595952.944297] kernel BUG at drivers/scsi/device_handler/scsi_dh_rdac.c:427!
[595952.951143] Internal error: Oops - BUG: 0 [#1] SMP
......
[595953.251065] Call trace:
[595953.259054] check_ownership+0xb0/0x118
[595953.269794] rdac_bus_attach+0x1f0/0x4b0
[595953.273787] scsi_dh_handler_attach+0x3c/0xe8
[595953.278211] scsi_dh_add_device+0xc4/0xe8
[595953.282291] scsi_sysfs_add_sdev+0x8c/0x2a8
[595953.286544] scsi_probe_and_add_lun+0x9fc/0xd00
[595953.291142] __scsi_scan_target+0x598/0x630
[595953.295395] scsi_scan_target+0x120/0x130
[595953.299481] fc_user_scan+0x1a0/0x1c0 [scsi_transport_fc]
[595953.304944] store_scan+0xb0/0x108
[595953.308420] dev_attr_store+0x44/0x60
[595953.312160] sysfs_kf_write+0x58/0x80
[595953.315893] kernfs_fop_write+0xe8/0x1f0
[595953.319888] __vfs_write+0x60/0x190
[595953.323448] vfs_write+0xac/0x1c0
[595953.326836] ksys_write+0x74/0xf0
[595953.330221] __arm64_sys_write+0x24/0x30
Code is in check_ownership:
list_for_each_entry_rcu(tmp, &h->ctlr->dh_list, node) {
/* h->sdev should always be valid */
BUG_ON(!tmp->sdev);
tmp->sdev->access_state = access_state;
}
rdac_bus_attach
initialize_controller
list_add_rcu(&h->node, &h->ctlr->dh_list);
h->sdev = sdev;
rdac_bus_detach
list_del_rcu(&h->node);
h->sdev = NULL;
Fix the race between rdac_bus_attach() and rdac_bus_detach() where h->sdev
is NULL when processing the RDAC attach.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Ye Bin <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/device_handler/scsi_dh_rdac.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 5efc959493ec..85a71bafaea7 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -453,8 +453,8 @@ static int initialize_controller(struct scsi_device *sdev,
if (!h->ctlr)
err = SCSI_DH_RES_TEMP_UNAVAIL;
else {
- list_add_rcu(&h->node, &h->ctlr->dh_list);
h->sdev = sdev;
+ list_add_rcu(&h->node, &h->ctlr->dh_list);
}
spin_unlock(&list_lock);
err = SCSI_DH_OK;
@@ -778,11 +778,11 @@ static void rdac_bus_detach( struct scsi_device *sdev )
spin_lock(&list_lock);
if (h->ctlr) {
list_del_rcu(&h->node);
- h->sdev = NULL;
kref_put(&h->ctlr->kref, release_controller);
}
spin_unlock(&list_lock);
sdev->handler_data = NULL;
+ synchronize_rcu();
kfree(h);
}
--
2.30.2
From: Parav Pandit <[email protected]>
[ Upstream commit 0e566c8f0f2e8325e35f6f97e13cde5356b41814 ]
VQs may be accessed to mark the device broken while they are
created/destroyed. Hence protect the access to the vqs list.
Fixes: e2dcdfe95c0b ("virtio: virtio_break_device() to mark all virtqueues broken.")
Signed-off-by: Parav Pandit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/virtio/virtio.c | 1 +
drivers/virtio/virtio_ring.c | 8 ++++++++
include/linux/virtio.h | 1 +
3 files changed, 10 insertions(+)
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 42e09cc1b8ac..84b5dec5d29c 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -357,6 +357,7 @@ int register_virtio_device(struct virtio_device *dev)
virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
INIT_LIST_HEAD(&dev->vqs);
+ spin_lock_init(&dev->vqs_list_lock);
/*
* device_add() causes the bus infrastructure to look for a matching
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 71e16b53e9c1..6b7aa26c5384 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -1668,7 +1668,9 @@ static struct virtqueue *vring_create_virtqueue_packed(
cpu_to_le16(vq->packed.event_flags_shadow);
}
+ spin_lock(&vdev->vqs_list_lock);
list_add_tail(&vq->vq.list, &vdev->vqs);
+ spin_unlock(&vdev->vqs_list_lock);
return &vq->vq;
err_desc_extra:
@@ -2126,7 +2128,9 @@ struct virtqueue *__vring_new_virtqueue(unsigned int index,
memset(vq->split.desc_state, 0, vring.num *
sizeof(struct vring_desc_state_split));
+ spin_lock(&vdev->vqs_list_lock);
list_add_tail(&vq->vq.list, &vdev->vqs);
+ spin_unlock(&vdev->vqs_list_lock);
return &vq->vq;
}
EXPORT_SYMBOL_GPL(__vring_new_virtqueue);
@@ -2210,7 +2214,9 @@ void vring_del_virtqueue(struct virtqueue *_vq)
}
if (!vq->packed_ring)
kfree(vq->split.desc_state);
+ spin_lock(&vq->vq.vdev->vqs_list_lock);
list_del(&_vq->list);
+ spin_unlock(&vq->vq.vdev->vqs_list_lock);
kfree(vq);
}
EXPORT_SYMBOL_GPL(vring_del_virtqueue);
@@ -2274,10 +2280,12 @@ void virtio_break_device(struct virtio_device *dev)
{
struct virtqueue *_vq;
+ spin_lock(&dev->vqs_list_lock);
list_for_each_entry(_vq, &dev->vqs, list) {
struct vring_virtqueue *vq = to_vvq(_vq);
vq->broken = true;
}
+ spin_unlock(&dev->vqs_list_lock);
}
EXPORT_SYMBOL_GPL(virtio_break_device);
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 55ea329fe72a..8ecc2e208d61 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -110,6 +110,7 @@ struct virtio_device {
bool config_enabled;
bool config_change_pending;
spinlock_t config_lock;
+ spinlock_t vqs_list_lock; /* Protects VQs list access */
struct device dev;
struct virtio_device_id id;
const struct virtio_config_ops *config;
--
2.30.2
From: Frank Wunderlich <[email protected]>
[ Upstream commit 5aa95d8834e07907e64937d792c12ffef7fb271f ]
If probe_device is failing, iommu_group is not initialized because
iommu_group_add_device is not reached, so freeing it will result
in NULL pointer access.
iommu_bus_init
->bus_iommu_probe
->probe_iommu_group in for each:/* return -22 in fail case */
->iommu_probe_device
->__iommu_probe_device /* return -22 here.*/
-> ops->probe_device /* return -22 here.*/
-> iommu_group_get_for_dev
-> ops->device_group
-> iommu_group_add_device //good case
->remove_iommu_group //in fail case, it will remove group
->iommu_release_device
->iommu_group_remove_device // here we don't have group
In my case ops->probe_device (mtk_iommu_probe_device from
mtk_iommu_v1.c) is due to failing fwspec->ops mismatch.
Fixes: d72e31c93746 ("iommu: IOMMU Groups")
Signed-off-by: Frank Wunderlich <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/iommu.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 9b8664d388af..bcf060b5cf85 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -879,6 +879,9 @@ void iommu_group_remove_device(struct device *dev)
struct iommu_group *group = dev->iommu_group;
struct group_device *tmp_device, *device = NULL;
+ if (!group)
+ return;
+
dev_info(dev, "Removing from iommu group %d\n", group->id);
/* Pre-notify listeners that a device is being removed. */
--
2.30.2
From: Yongqiang Niu <[email protected]>
[ Upstream commit 71dcadba34203d8dd35152e368720f977e9cdb81 ]
The orginal setting is not correct, fix it to follow hardware data sheet.
If keep this error setting, mt8173/mt8183 display ok
but mt8192 display abnormal.
Fixes: 0664d1392c26 ("drm/mediatek: Add AAL engine basic function")
Signed-off-by: Yongqiang Niu <[email protected]>
Signed-off-by: Chun-Kuang Hu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 3064eac1a750..fe58edcf57b5 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -180,7 +180,7 @@ static void mtk_aal_config(struct mtk_ddp_comp *comp, unsigned int w,
unsigned int h, unsigned int vrefresh,
unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
{
- mtk_ddp_write(cmdq_pkt, h << 16 | w, comp, DISP_AAL_SIZE);
+ mtk_ddp_write(cmdq_pkt, w << 16 | h, comp, DISP_AAL_SIZE);
}
static void mtk_aal_start(struct mtk_ddp_comp *comp)
--
2.30.2
From: Qingqing Zhuo <[email protected]>
[ Upstream commit c4152b297d56d3696ad0a9003169bc5b98ad7b72 ]
[Why]
HPD disable and enable sequences are not mutually exclusive
on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s),
part of the disable sequence (specifically, a request to SMU
to lower refclk) could come right before the call to PHY
enable, causing DMUB to access an unresponsive PHY
and thus a hard hang on the system.
[How]
Disable 48mhz refclk off on native DP.
Reviewed-by: Hersen Wu <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Qingqing Zhuo <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
index 1c6e401dd4cc..0eba391e597f 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
@@ -66,9 +66,11 @@ int rn_get_active_display_cnt_wa(
for (i = 0; i < context->stream_count; i++) {
const struct dc_stream_state *stream = context->streams[i];
+ /* Extend the WA to DP for Linux*/
if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A ||
stream->signal == SIGNAL_TYPE_DVI_SINGLE_LINK ||
- stream->signal == SIGNAL_TYPE_DVI_DUAL_LINK)
+ stream->signal == SIGNAL_TYPE_DVI_DUAL_LINK ||
+ stream->signal == SIGNAL_TYPE_DISPLAY_PORT)
tmds_present = true;
}
--
2.30.2
From: Xie Yongji <[email protected]>
[ Upstream commit f7ad318ea0ad58ebe0e595e59aed270bb643b29b ]
This fixes the incorrect calculation for integer overflow
when the last address of iova range is 0xffffffff.
Fixes: ec33d031a14b ("vhost: detect 32 bit integer wrap around")
Reported-by: Jason Wang <[email protected]>
Signed-off-by: Xie Yongji <[email protected]>
Acked-by: Jason Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vhost/vhost.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 5ccb0705beae..f41463ab4031 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -735,10 +735,16 @@ static bool log_access_ok(void __user *log_base, u64 addr, unsigned long sz)
(sz + VHOST_PAGE_SIZE * 8 - 1) / VHOST_PAGE_SIZE / 8);
}
+/* Make sure 64 bit math will not overflow. */
static bool vhost_overflow(u64 uaddr, u64 size)
{
- /* Make sure 64 bit math will not overflow. */
- return uaddr > ULONG_MAX || size > ULONG_MAX || uaddr > ULONG_MAX - size;
+ if (uaddr > ULONG_MAX || size > ULONG_MAX)
+ return true;
+
+ if (!size)
+ return false;
+
+ return uaddr > ULONG_MAX - size + 1;
}
/* Caller should have vq mutex and device mutex. */
--
2.30.2
From: Eli Cohen <[email protected]>
[ Upstream commit 08dbd5660232bede7916d8568003012c1182cc9a ]
The current code treats an empty iotlb provdied in set_map() as a
special case and destroy the memory region object. This must not be done
since the virtqueue objects reference this MR. Doing so will cause the
driver unload to emit errors and log timeouts caused by the firmware
complaining on busy resources.
This patch treats an empty iotlb as any other change of mapping. In this
case, mlx5_vdpa_create_mr() will fail and the entire set_map() call to
fail.
This issue has not been encountered before but was seen to occur in a
non-official version of qemu. Since qemu is a userspace program, the
driver must protect against such case.
Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vdpa/mlx5/core/mr.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/vdpa/mlx5/core/mr.c b/drivers/vdpa/mlx5/core/mr.c
index aa656f57bf5b..32c9925de473 100644
--- a/drivers/vdpa/mlx5/core/mr.c
+++ b/drivers/vdpa/mlx5/core/mr.c
@@ -454,11 +454,6 @@ out:
mutex_unlock(&mr->mkey_mtx);
}
-static bool map_empty(struct vhost_iotlb *iotlb)
-{
- return !vhost_iotlb_itree_first(iotlb, 0, U64_MAX);
-}
-
int mlx5_vdpa_handle_set_map(struct mlx5_vdpa_dev *mvdev, struct vhost_iotlb *iotlb,
bool *change_map)
{
@@ -466,10 +461,6 @@ int mlx5_vdpa_handle_set_map(struct mlx5_vdpa_dev *mvdev, struct vhost_iotlb *io
int err = 0;
*change_map = false;
- if (map_empty(iotlb)) {
- mlx5_vdpa_destroy_mr(mvdev);
- return 0;
- }
mutex_lock(&mr->mkey_mtx);
if (mr->initialized) {
mlx5_vdpa_info(mvdev, "memory map update\n");
--
2.30.2
From: Jakub Kicinski <[email protected]>
[ Upstream commit 01cca6b9330ac7460de44eeeb3a0607f8aae69ff ]
napi schedules DIM, napi has to be disabled first,
then DIM canceled.
Noticed while reading the code.
Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown")
Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation")
Reviewed-by: Michael Chan <[email protected]>
Reviewed-by: Edwin Peer <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 65e41612b9da..621346656af3 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -8855,10 +8855,9 @@ static void bnxt_disable_napi(struct bnxt *bp)
for (i = 0; i < bp->cp_nr_rings; i++) {
struct bnxt_cp_ring_info *cpr = &bp->bnapi[i]->cp_ring;
+ napi_disable(&bp->bnapi[i]->napi);
if (bp->bnapi[i]->rx_ring)
cancel_work_sync(&cpr->dim.work);
-
- napi_disable(&bp->bnapi[i]->napi);
}
}
--
2.30.2
From: Yongqiang Niu <[email protected]>
[ Upstream commit 51c0e618b219c025ddaaf14baea8942cb7e2105b ]
MMSYS is the driver which controls the routing of these DDP components,
so the definition of the mtk_ddp_comp_id enum should be placed in mtk-mmsys.h
Signed-off-by: Yongqiang Niu <[email protected]>
Signed-off-by: Enric Balletbo i Serra <[email protected]>
Reviewed-by: Chun-Kuang Hu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 34 +--------------------
drivers/soc/mediatek/mtk-mmsys.c | 4 +--
include/linux/soc/mediatek/mtk-mmsys.h | 33 ++++++++++++++++++++
3 files changed, 35 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 1d9e00b69462..5aa52b7afeec 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -7,6 +7,7 @@
#define MTK_DRM_DDP_COMP_H
#include <linux/io.h>
+#include <linux/soc/mediatek/mtk-mmsys.h>
struct device;
struct device_node;
@@ -35,39 +36,6 @@ enum mtk_ddp_comp_type {
MTK_DDP_COMP_TYPE_MAX,
};
-enum mtk_ddp_comp_id {
- DDP_COMPONENT_AAL0,
- DDP_COMPONENT_AAL1,
- DDP_COMPONENT_BLS,
- DDP_COMPONENT_CCORR,
- DDP_COMPONENT_COLOR0,
- DDP_COMPONENT_COLOR1,
- DDP_COMPONENT_DITHER,
- DDP_COMPONENT_DPI0,
- DDP_COMPONENT_DPI1,
- DDP_COMPONENT_DSI0,
- DDP_COMPONENT_DSI1,
- DDP_COMPONENT_DSI2,
- DDP_COMPONENT_DSI3,
- DDP_COMPONENT_GAMMA,
- DDP_COMPONENT_OD0,
- DDP_COMPONENT_OD1,
- DDP_COMPONENT_OVL0,
- DDP_COMPONENT_OVL_2L0,
- DDP_COMPONENT_OVL_2L1,
- DDP_COMPONENT_OVL1,
- DDP_COMPONENT_PWM0,
- DDP_COMPONENT_PWM1,
- DDP_COMPONENT_PWM2,
- DDP_COMPONENT_RDMA0,
- DDP_COMPONENT_RDMA1,
- DDP_COMPONENT_RDMA2,
- DDP_COMPONENT_UFOE,
- DDP_COMPONENT_WDMA0,
- DDP_COMPONENT_WDMA1,
- DDP_COMPONENT_ID_MAX,
-};
-
struct mtk_ddp_comp;
struct cmdq_pkt;
struct mtk_ddp_comp_funcs {
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index a55f25511173..36ad66bb221b 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -5,13 +5,11 @@
*/
#include <linux/device.h>
+#include <linux/io.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/soc/mediatek/mtk-mmsys.h>
-#include "../../gpu/drm/mediatek/mtk_drm_ddp.h"
-#include "../../gpu/drm/mediatek/mtk_drm_ddp_comp.h"
-
#define DISP_REG_CONFIG_DISP_OVL0_MOUT_EN 0x040
#define DISP_REG_CONFIG_DISP_OVL1_MOUT_EN 0x044
#define DISP_REG_CONFIG_DISP_OD_MOUT_EN 0x048
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index 7bab5d9a3d31..2228bf6133da 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -9,6 +9,39 @@
enum mtk_ddp_comp_id;
struct device;
+enum mtk_ddp_comp_id {
+ DDP_COMPONENT_AAL0,
+ DDP_COMPONENT_AAL1,
+ DDP_COMPONENT_BLS,
+ DDP_COMPONENT_CCORR,
+ DDP_COMPONENT_COLOR0,
+ DDP_COMPONENT_COLOR1,
+ DDP_COMPONENT_DITHER,
+ DDP_COMPONENT_DPI0,
+ DDP_COMPONENT_DPI1,
+ DDP_COMPONENT_DSI0,
+ DDP_COMPONENT_DSI1,
+ DDP_COMPONENT_DSI2,
+ DDP_COMPONENT_DSI3,
+ DDP_COMPONENT_GAMMA,
+ DDP_COMPONENT_OD0,
+ DDP_COMPONENT_OD1,
+ DDP_COMPONENT_OVL0,
+ DDP_COMPONENT_OVL_2L0,
+ DDP_COMPONENT_OVL_2L1,
+ DDP_COMPONENT_OVL1,
+ DDP_COMPONENT_PWM0,
+ DDP_COMPONENT_PWM1,
+ DDP_COMPONENT_PWM2,
+ DDP_COMPONENT_RDMA0,
+ DDP_COMPONENT_RDMA1,
+ DDP_COMPONENT_RDMA2,
+ DDP_COMPONENT_UFOE,
+ DDP_COMPONENT_WDMA0,
+ DDP_COMPONENT_WDMA1,
+ DDP_COMPONENT_ID_MAX,
+};
+
void mtk_mmsys_ddp_connect(struct device *dev,
enum mtk_ddp_comp_id cur,
enum mtk_ddp_comp_id next);
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit 19d1532a187669ce86d5a2696eb7275310070793 ]
Syzbot reported slab-out-of bounds write in decode_data().
The problem was in missing validation checks.
Syzbot's reproducer generated malicious input, which caused
decode_data() to be called a lot in sixpack_decode(). Since
rx_count_cooked is only 400 bytes and noone reported before,
that 400 bytes is not enough, let's just check if input is malicious
and complain about buffer overrun.
Fail log:
==================================================================
BUG: KASAN: slab-out-of-bounds in drivers/net/hamradio/6pack.c:843
Write of size 1 at addr ffff888087c5544e by task kworker/u4:0/7
CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.6.0-rc3-syzkaller #0
...
Workqueue: events_unbound flush_to_ldisc
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_store1_noabort+0x17/0x20 mm/kasan/generic_report.c:137
decode_data.part.0+0x23b/0x270 drivers/net/hamradio/6pack.c:843
decode_data drivers/net/hamradio/6pack.c:965 [inline]
sixpack_decode drivers/net/hamradio/6pack.c:968 [inline]
Reported-and-tested-by: [email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hamradio/6pack.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 71d6629e65c9..da13683d52d1 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -839,6 +839,12 @@ static void decode_data(struct sixpack *sp, unsigned char inbyte)
return;
}
+ if (sp->rx_count_cooked + 2 >= sizeof(sp->cooked_buf)) {
+ pr_err("6pack: cooked buffer overrun, data loss\n");
+ sp->rx_count = 0;
+ return;
+ }
+
buf = sp->raw_buf;
sp->cooked_buf[sp->rx_count_cooked++] =
buf[0] | ((buf[1] << 2) & 0xc0);
--
2.30.2
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 9a253bb42f190efd1a1c156939ad7298b3529dca ]
WSA881x powerdown pin is connected to GPIO1, GPIO2 not GPIO2 and GPIO3,
so correct this. This was working so far due to a shift bug in gpio driver,
however once that is fixed this will stop working, so fix this!
For some reason we forgot to add this dts change in last merge cycle so
currently audio is broken in 5.13 as the gpio driver fix already landed
in 5.13.
Reported-by: Shawn Guo <[email protected]>
Fixes: 45021d35fcb2 ("arm64: dts: qcom: c630: Enable audio support")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Tested-by: Shawn Guo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 888dc23a530e..ad6561843ba2 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -564,7 +564,7 @@
left_spkr: wsa8810-left{
compatible = "sdw10217211000";
reg = <0 3>;
- powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrLeft";
#sound-dai-cells = <0>;
@@ -572,7 +572,7 @@
right_spkr: wsa8810-right{
compatible = "sdw10217211000";
- powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
reg = <0 4>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrRight";
--
2.30.2
From: Michael Chan <[email protected]>
[ Upstream commit 976e52b718c3de9077fff8f3f674afb159c57fb1 ]
212 firmware broke aRFS, so disable it. Traffic may stop after ntuple
filters are inserted and deleted by the 212 firmware.
Fixes: ae10ae740ad2 ("bnxt_en: Add new hardware RFS mode.")
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 96b76b713dd8..dbd99a8fd9c9 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10396,6 +10396,9 @@ static bool bnxt_rfs_supported(struct bnxt *bp)
return true;
return false;
}
+ /* 212 firmware is broken for aRFS */
+ if (BNXT_FW_MAJ(bp) == 212)
+ return false;
if (BNXT_PF(bp) && !BNXT_CHIP_TYPE_NITRO_A0(bp))
return true;
if (bp->flags & BNXT_FLAG_NEW_RSS_CAP)
--
2.30.2
From: Michael Chan <[email protected]>
[ Upstream commit 828affc27ed43441bd1efdaf4e07e96dd43a0362 ]
Each completion ring entry has a valid bit to indicate that the entry
contains a valid completion event. The driver's main poll loop
__bnxt_poll_work() has the proper dma_rmb() to make sure the valid
bit of the next entry has been checked before proceeding further.
But when we call bnxt_rx_pkt() to process the RX event, the RX
completion event consists of two completion entries and only the
first entry has been checked to be valid. We need the same barrier
after checking the next completion entry. Add missing dma_rmb()
barriers in bnxt_rx_pkt() and other similar locations.
Fixes: 67a95e2022c7 ("bnxt_en: Need memory barrier when processing the completion ring.")
Reported-by: Lance Richardson <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Lance Richardson <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index dbd99a8fd9c9..849ae99a955a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1747,6 +1747,10 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
if (!RX_CMP_VALID(rxcmp1, tmp_raw_cons))
return -EBUSY;
+ /* The valid test of the entry must be done first before
+ * reading any further.
+ */
+ dma_rmb();
prod = rxr->rx_prod;
if (cmp_type == CMP_TYPE_RX_L2_TPA_START_CMP) {
@@ -1950,6 +1954,10 @@ static int bnxt_force_rx_discard(struct bnxt *bp,
if (!RX_CMP_VALID(rxcmp1, tmp_raw_cons))
return -EBUSY;
+ /* The valid test of the entry must be done first before
+ * reading any further.
+ */
+ dma_rmb();
cmp_type = RX_CMP_TYPE(rxcmp);
if (cmp_type == CMP_TYPE_RX_L2_CMP) {
rxcmp1->rx_cmp_cfa_code_errors_v2 |=
@@ -2394,6 +2402,10 @@ static int bnxt_poll_nitroa0(struct napi_struct *napi, int budget)
if (!TX_CMP_VALID(txcmp, raw_cons))
break;
+ /* The valid test of the entry must be done first before
+ * reading any further.
+ */
+ dma_rmb();
if ((TX_CMP_TYPE(txcmp) & 0x30) == 0x10) {
tmp_raw_cons = NEXT_RAW_CMP(raw_cons);
cp_cons = RING_CMP(tmp_raw_cons);
--
2.30.2
From: Petr Vorel <[email protected]>
[ Upstream commit 9d1fc2e4f5a94a492c7dd1ca577c66fdb7571c84 ]
Bullhead firmware obviously doesn't support PSCI as it fails to boot
with this definition.
Fixes: 329e16d5f8fc ("arm64: dts: qcom: msm8992: Add PSCI support.")
Signed-off-by: Petr Vorel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 5969b5cfdc85..cb82864a90ef 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Petr Vorel <[email protected]>
*/
/dts-v1/;
@@ -15,6 +16,9 @@
qcom,board-id = <0xb64 0>;
qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+ /* Bullhead firmware doesn't support PSCI */
+ /delete-node/ psci;
+
aliases {
serial0 = &blsp1_uart2;
};
--
2.30.2
From: Andy Shevchenko <[email protected]>
[ Upstream commit 55c8fca1dae1fb0d11deaa21b65a647dedb1bc50 ]
During the swap dependency on PCH_GBE to selection PTP_1588_CLOCK_PCH
incidentally dropped the implicit dependency on the PCI. Restore it.
Fixes: 18d359ceb044 ("pch_gbe, ptp_pch: Fix the dependency direction between these drivers")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index deb429a3dff1..3e377f3c69e5 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -90,7 +90,8 @@ config PTP_1588_CLOCK_INES
config PTP_1588_CLOCK_PCH
tristate "Intel PCH EG20T as PTP clock"
depends on X86_32 || COMPILE_TEST
- depends on HAS_IOMEM && NET
+ depends on HAS_IOMEM && PCI
+ depends on NET
imply PTP_1588_CLOCK
help
This driver adds support for using the PCH EG20T as a PTP
--
2.30.2
From: Xuan Zhuo <[email protected]>
[ Upstream commit 97c2c69e1926260c78c7f1c0b2c987934f1dc7a1 ]
The number of queues implemented by many virtio backends is limited,
especially some machines have a large number of CPUs. In this case, it
is often impossible to allocate a separate queue for
XDP_TX/XDP_REDIRECT, then xdp cannot be loaded to work, even xdp does
not use the XDP_TX/XDP_REDIRECT.
This patch allows XDP_TX/XDP_REDIRECT to run by reuse the existing SQ
with __netif_tx_lock() hold when there are not enough queues.
Signed-off-by: Xuan Zhuo <[email protected]>
Reviewed-by: Dust Li <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/virtio_net.c | 62 +++++++++++++++++++++++++++++++---------
1 file changed, 49 insertions(+), 13 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 7d1f609306f9..a47cf77a0b08 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -195,6 +195,9 @@ struct virtnet_info {
/* # of XDP queue pairs currently used by the driver */
u16 xdp_queue_pairs;
+ /* xdp_queue_pairs may be 0, when xdp is already loaded. So add this. */
+ bool xdp_enabled;
+
/* I like... big packets and I cannot lie! */
bool big_packets;
@@ -485,12 +488,41 @@ static int __virtnet_xdp_xmit_one(struct virtnet_info *vi,
return 0;
}
-static struct send_queue *virtnet_xdp_sq(struct virtnet_info *vi)
-{
- unsigned int qp;
-
- qp = vi->curr_queue_pairs - vi->xdp_queue_pairs + smp_processor_id();
- return &vi->sq[qp];
+/* when vi->curr_queue_pairs > nr_cpu_ids, the txq/sq is only used for xdp tx on
+ * the current cpu, so it does not need to be locked.
+ *
+ * Here we use marco instead of inline functions because we have to deal with
+ * three issues at the same time: 1. the choice of sq. 2. judge and execute the
+ * lock/unlock of txq 3. make sparse happy. It is difficult for two inline
+ * functions to perfectly solve these three problems at the same time.
+ */
+#define virtnet_xdp_get_sq(vi) ({ \
+ struct netdev_queue *txq; \
+ typeof(vi) v = (vi); \
+ unsigned int qp; \
+ \
+ if (v->curr_queue_pairs > nr_cpu_ids) { \
+ qp = v->curr_queue_pairs - v->xdp_queue_pairs; \
+ qp += smp_processor_id(); \
+ txq = netdev_get_tx_queue(v->dev, qp); \
+ __netif_tx_acquire(txq); \
+ } else { \
+ qp = smp_processor_id() % v->curr_queue_pairs; \
+ txq = netdev_get_tx_queue(v->dev, qp); \
+ __netif_tx_lock(txq, raw_smp_processor_id()); \
+ } \
+ v->sq + qp; \
+})
+
+#define virtnet_xdp_put_sq(vi, q) { \
+ struct netdev_queue *txq; \
+ typeof(vi) v = (vi); \
+ \
+ txq = netdev_get_tx_queue(v->dev, (q) - v->sq); \
+ if (v->curr_queue_pairs > nr_cpu_ids) \
+ __netif_tx_release(txq); \
+ else \
+ __netif_tx_unlock(txq); \
}
static int virtnet_xdp_xmit(struct net_device *dev,
@@ -516,7 +548,7 @@ static int virtnet_xdp_xmit(struct net_device *dev,
if (!xdp_prog)
return -ENXIO;
- sq = virtnet_xdp_sq(vi);
+ sq = virtnet_xdp_get_sq(vi);
if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK)) {
ret = -EINVAL;
@@ -564,12 +596,13 @@ out:
sq->stats.kicks += kicks;
u64_stats_update_end(&sq->stats.syncp);
+ virtnet_xdp_put_sq(vi, sq);
return ret;
}
static unsigned int virtnet_get_headroom(struct virtnet_info *vi)
{
- return vi->xdp_queue_pairs ? VIRTIO_XDP_HEADROOM : 0;
+ return vi->xdp_enabled ? VIRTIO_XDP_HEADROOM : 0;
}
/* We copy the packet for XDP in the following cases:
@@ -1473,12 +1506,13 @@ static int virtnet_poll(struct napi_struct *napi, int budget)
xdp_do_flush();
if (xdp_xmit & VIRTIO_XDP_TX) {
- sq = virtnet_xdp_sq(vi);
+ sq = virtnet_xdp_get_sq(vi);
if (virtqueue_kick_prepare(sq->vq) && virtqueue_notify(sq->vq)) {
u64_stats_update_begin(&sq->stats.syncp);
sq->stats.kicks++;
u64_stats_update_end(&sq->stats.syncp);
}
+ virtnet_xdp_put_sq(vi, sq);
}
return received;
@@ -2453,10 +2487,9 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog,
/* XDP requires extra queues for XDP_TX */
if (curr_qp + xdp_qp > vi->max_queue_pairs) {
- NL_SET_ERR_MSG_MOD(extack, "Too few free TX rings available");
- netdev_warn(dev, "request %i queues but max is %i\n",
+ netdev_warn(dev, "XDP request %i queues but max is %i. XDP_TX and XDP_REDIRECT will operate in a slower locked tx mode.\n",
curr_qp + xdp_qp, vi->max_queue_pairs);
- return -ENOMEM;
+ xdp_qp = 0;
}
old_prog = rtnl_dereference(vi->rq[0].xdp_prog);
@@ -2490,11 +2523,14 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog,
vi->xdp_queue_pairs = xdp_qp;
if (prog) {
+ vi->xdp_enabled = true;
for (i = 0; i < vi->max_queue_pairs; i++) {
rcu_assign_pointer(vi->rq[i].xdp_prog, prog);
if (i == 0 && !old_prog)
virtnet_clear_guest_offloads(vi);
}
+ } else {
+ vi->xdp_enabled = false;
}
for (i = 0; i < vi->max_queue_pairs; i++) {
@@ -2562,7 +2598,7 @@ static int virtnet_set_features(struct net_device *dev,
int err;
if ((dev->features ^ features) & NETIF_F_LRO) {
- if (vi->xdp_queue_pairs)
+ if (vi->xdp_enabled)
return -EBUSY;
if (features & NETIF_F_LRO)
--
2.30.2
From: Jason Wang <[email protected]>
[ Upstream commit dbcf24d153884439dad30484a0e3f02350692e4c ]
Commit a02e8964eaf92 ("virtio-net: ethtool configurable LRO")
maps LRO to virtio guest offloading features and allows the
administrator to enable and disable those features via ethtool.
This leads to several issues:
- For a device that doesn't support control guest offloads, the "LRO"
can't be disabled triggering WARN in dev_disable_lro() when turning
off LRO or when enabling forwarding bridging etc.
- For a device that supports control guest offloads, the guest
offloads are disabled in cases of bridging, forwarding etc slowing
down the traffic.
Fix this by using NETIF_F_GRO_HW instead. Though the spec does not
guarantee packets to be re-segmented as the original ones,
we can add that to the spec, possibly with a flag for devices to
differentiate between GRO and LRO.
Further, we never advertised LRO historically before a02e8964eaf92
("virtio-net: ethtool configurable LRO") and so bridged/forwarded
configs effectively always relied on virtio receive offloads behaving
like GRO - thus even if this breaks any configs it is at least not
a regression.
Fixes: a02e8964eaf92 ("virtio-net: ethtool configurable LRO")
Acked-by: Michael S. Tsirkin <[email protected]>
Reported-by: Ivan <[email protected]>
Tested-by: Ivan <[email protected]>
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/virtio_net.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index a47cf77a0b08..cbe47eed7cc3 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -63,7 +63,7 @@ static const unsigned long guest_offloads[] = {
VIRTIO_NET_F_GUEST_CSUM
};
-#define GUEST_OFFLOAD_LRO_MASK ((1ULL << VIRTIO_NET_F_GUEST_TSO4) | \
+#define GUEST_OFFLOAD_GRO_HW_MASK ((1ULL << VIRTIO_NET_F_GUEST_TSO4) | \
(1ULL << VIRTIO_NET_F_GUEST_TSO6) | \
(1ULL << VIRTIO_NET_F_GUEST_ECN) | \
(1ULL << VIRTIO_NET_F_GUEST_UFO))
@@ -2466,7 +2466,7 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog,
virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_ECN) ||
virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_UFO) ||
virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_CSUM))) {
- NL_SET_ERR_MSG_MOD(extack, "Can't set XDP while host is implementing LRO/CSUM, disable LRO/CSUM first");
+ NL_SET_ERR_MSG_MOD(extack, "Can't set XDP while host is implementing GRO_HW/CSUM, disable GRO_HW/CSUM first");
return -EOPNOTSUPP;
}
@@ -2597,15 +2597,15 @@ static int virtnet_set_features(struct net_device *dev,
u64 offloads;
int err;
- if ((dev->features ^ features) & NETIF_F_LRO) {
+ if ((dev->features ^ features) & NETIF_F_GRO_HW) {
if (vi->xdp_enabled)
return -EBUSY;
- if (features & NETIF_F_LRO)
+ if (features & NETIF_F_GRO_HW)
offloads = vi->guest_offloads_capable;
else
offloads = vi->guest_offloads_capable &
- ~GUEST_OFFLOAD_LRO_MASK;
+ ~GUEST_OFFLOAD_GRO_HW_MASK;
err = virtnet_set_guest_offloads(vi, offloads);
if (err)
@@ -3080,9 +3080,9 @@ static int virtnet_probe(struct virtio_device *vdev)
dev->features |= NETIF_F_RXCSUM;
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6))
- dev->features |= NETIF_F_LRO;
+ dev->features |= NETIF_F_GRO_HW;
if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_GUEST_OFFLOADS))
- dev->hw_features |= NETIF_F_LRO;
+ dev->hw_features |= NETIF_F_GRO_HW;
dev->vlan_features = dev->features;
--
2.30.2
From: Wang Hai <[email protected]>
[ Upstream commit 1b80fec7b043552e01609bae7d0aad07aa742adc ]
In ixgbe_xsk_pool_enable(), if ixgbe_xsk_wakeup() fails,
We should restore the previous state and clean up the
resources. Add the missing clear af_xdp_zc_qps and unmap dma
to fix this bug.
Fixes: d49e286d354e ("ixgbe: add tracking of AF_XDP zero-copy state for each queue pair")
Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Wang Hai <[email protected]>
Acked-by: Magnus Karlsson <[email protected]>
Tested-by: Sandeep Penigalapati <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
index f72d2978263b..d60da7a89092 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
@@ -52,8 +52,11 @@ static int ixgbe_xsk_pool_enable(struct ixgbe_adapter *adapter,
/* Kick start the NAPI context so that receiving will start */
err = ixgbe_xsk_wakeup(adapter->netdev, qid, XDP_WAKEUP_RX);
- if (err)
+ if (err) {
+ clear_bit(qid, adapter->af_xdp_zc_qps);
+ xsk_pool_dma_unmap(pool, IXGBE_RX_DMA_ATTR);
return err;
+ }
}
return 0;
--
2.30.2
From: Xie Yongji <[email protected]>
[ Upstream commit 0e398290cff997610b66e73573faaee70c9a700e ]
The "msg->iova + msg->size" addition can have an integer overflow
if the iotlb message is from a malicious user space application.
So let's fix it.
Fixes: 1b48dc03e575 ("vhost: vdpa: report iova range")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Xie Yongji <[email protected]>
Acked-by: Jason Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vhost/vdpa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c
index 80184153ac7d..c4d53ff06bf8 100644
--- a/drivers/vhost/vdpa.c
+++ b/drivers/vhost/vdpa.c
@@ -623,7 +623,8 @@ static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v,
long pinned;
int ret = 0;
- if (msg->iova < v->range.first ||
+ if (msg->iova < v->range.first || !msg->size ||
+ msg->iova > U64_MAX - msg->size + 1 ||
msg->iova + msg->size - 1 > v->range.last)
return -EINVAL;
--
2.30.2
From: Jakub Kicinski <[email protected]>
[ Upstream commit 3c603136c9f82833813af77185618de5af67676c ]
We can't take the tx lock from the napi poll routine, because
netpoll can poll napi at any moment, including with the tx lock
already held.
The tx lock is protecting against two paths - the disable
path, and (as Michael points out) the NETDEV_TX_BUSY case
which may occur if NAPI completions race with start_xmit
and both decide to re-enable the queue.
For the disable/ifdown path use synchronize_net() to make sure
closing the device does not race we restarting the queues.
Annotate accesses to dev_state against data races.
For the NAPI cleanup vs start_xmit path - appropriate barriers
are already in place in the main spot where Tx queue is stopped
but we need to do the same careful dance in the TX_BUSY case.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Michael Chan <[email protected]>
Reviewed-by: Edwin Peer <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 54 ++++++++++++++---------
1 file changed, 32 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 8f169508a90a..65e41612b9da 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -360,6 +360,26 @@ static u16 bnxt_xmit_get_cfa_action(struct sk_buff *skb)
return md_dst->u.port_info.port_id;
}
+static bool bnxt_txr_netif_try_stop_queue(struct bnxt *bp,
+ struct bnxt_tx_ring_info *txr,
+ struct netdev_queue *txq)
+{
+ netif_tx_stop_queue(txq);
+
+ /* netif_tx_stop_queue() must be done before checking
+ * tx index in bnxt_tx_avail() below, because in
+ * bnxt_tx_int(), we update tx index before checking for
+ * netif_tx_queue_stopped().
+ */
+ smp_mb();
+ if (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh) {
+ netif_tx_wake_queue(txq);
+ return false;
+ }
+
+ return true;
+}
+
static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bnxt *bp = netdev_priv(dev);
@@ -387,8 +407,8 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
free_size = bnxt_tx_avail(bp, txr);
if (unlikely(free_size < skb_shinfo(skb)->nr_frags + 2)) {
- netif_tx_stop_queue(txq);
- return NETDEV_TX_BUSY;
+ if (bnxt_txr_netif_try_stop_queue(bp, txr, txq))
+ return NETDEV_TX_BUSY;
}
length = skb->len;
@@ -597,16 +617,7 @@ tx_done:
if (netdev_xmit_more() && !tx_buf->is_push)
bnxt_db_write(bp, &txr->tx_db, prod);
- netif_tx_stop_queue(txq);
-
- /* netif_tx_stop_queue() must be done before checking
- * tx index in bnxt_tx_avail() below, because in
- * bnxt_tx_int(), we update tx index before checking for
- * netif_tx_queue_stopped().
- */
- smp_mb();
- if (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh)
- netif_tx_wake_queue(txq);
+ bnxt_txr_netif_try_stop_queue(bp, txr, txq);
}
return NETDEV_TX_OK;
@@ -690,14 +701,9 @@ next_tx_int:
smp_mb();
if (unlikely(netif_tx_queue_stopped(txq)) &&
- (bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh)) {
- __netif_tx_lock(txq, smp_processor_id());
- if (netif_tx_queue_stopped(txq) &&
- bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh &&
- txr->dev_state != BNXT_DEV_STATE_CLOSING)
- netif_tx_wake_queue(txq);
- __netif_tx_unlock(txq);
- }
+ bnxt_tx_avail(bp, txr) > bp->tx_wake_thresh &&
+ READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING)
+ netif_tx_wake_queue(txq);
}
static struct page *__bnxt_alloc_rx_page(struct bnxt *bp, dma_addr_t *mapping,
@@ -8885,9 +8891,11 @@ void bnxt_tx_disable(struct bnxt *bp)
if (bp->tx_ring) {
for (i = 0; i < bp->tx_nr_rings; i++) {
txr = &bp->tx_ring[i];
- txr->dev_state = BNXT_DEV_STATE_CLOSING;
+ WRITE_ONCE(txr->dev_state, BNXT_DEV_STATE_CLOSING);
}
}
+ /* Make sure napi polls see @dev_state change */
+ synchronize_net();
/* Drop carrier first to prevent TX timeout */
netif_carrier_off(bp->dev);
/* Stop all TX queues */
@@ -8901,8 +8909,10 @@ void bnxt_tx_enable(struct bnxt *bp)
for (i = 0; i < bp->tx_nr_rings; i++) {
txr = &bp->tx_ring[i];
- txr->dev_state = 0;
+ WRITE_ONCE(txr->dev_state, 0);
}
+ /* Make sure napi polls see @dev_state change */
+ synchronize_net();
netif_tx_wake_all_queues(bp->dev);
if (bp->link_info.link_up)
netif_carrier_on(bp->dev);
--
2.30.2
From: Tony Lindgren <[email protected]>
[ Upstream commit 06a089ef644934372a3062528244fca3417d3430 ]
We have changed the return type for sysc_check_active_timer() from -EBUSY
to -ENXIO, but the gpt12 system timer fix still checks for -EBUSY. We are
also not returning on other errors like we did earlier as noted by
Pavel Machek <[email protected]>.
Commit 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with
reserved status") should have been updated for commit 65fb73676112
("bus: ti-sysc: suppress err msg for timers used as clockevent/source").
Let's fix the issue by checking for -ENXIO and returning on any other
errors as suggested by Pavel Machek <[email protected]>.
Fixes: 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status")
Depends-on: 65fb73676112 ("bus: ti-sysc: suppress err msg for timers used as clockevent/source")
Reported-by: Pavel Machek <[email protected]>
Reviewed-by: Pavel Machek (CIP) <[email protected]>
Cc: Grygorii Strashko <[email protected]>
Cc: Jarkko Nikula <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bus/ti-sysc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index c3d8d44f28d7..159b57c6dc4d 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -3061,8 +3061,10 @@ static int sysc_probe(struct platform_device *pdev)
return error;
error = sysc_check_active_timer(ddata);
- if (error == -EBUSY)
+ if (error == -ENXIO)
ddata->reserved = true;
+ else if (error)
+ return error;
error = sysc_get_clocks(ddata);
if (error)
--
2.30.2
From: Liu Yi L <[email protected]>
[ Upstream commit 8798d36411196da86e70b994725349c16c1119f6 ]
This fixes improper iotlb invalidation in intel_pasid_tear_down_entry().
When a PASID was used as nested mode, released and reused, the following
error message will appear:
[ 180.187556] Unexpected page request in Privilege Mode
[ 180.187565] Unexpected page request in Privilege Mode
[ 180.279933] Unexpected page request in Privilege Mode
[ 180.279937] Unexpected page request in Privilege Mode
Per chapter 6.5.3.3 of VT-d spec 3.3, when tear down a pasid entry, the
software should use Domain selective IOTLB flush if the PGTT of the pasid
entry is SL only or Nested, while for the pasid entries whose PGTT is FL
only or PT using PASID-based IOTLB flush is enough.
Fixes: 2cd1311a26673 ("iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr")
Signed-off-by: Kumar Sanjay K <[email protected]>
Signed-off-by: Liu Yi L <[email protected]>
Tested-by: Yi Sun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/intel/pasid.c | 10 ++++++++--
drivers/iommu/intel/pasid.h | 6 ++++++
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index 77fbe9908abd..fb911b6c418f 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -497,20 +497,26 @@ void intel_pasid_tear_down_entry(struct intel_iommu *iommu, struct device *dev,
u32 pasid, bool fault_ignore)
{
struct pasid_entry *pte;
- u16 did;
+ u16 did, pgtt;
pte = intel_pasid_get_entry(dev, pasid);
if (WARN_ON(!pte))
return;
did = pasid_get_domain_id(pte);
+ pgtt = pasid_pte_get_pgtt(pte);
+
intel_pasid_clear_entry(dev, pasid, fault_ignore);
if (!ecap_coherent(iommu->ecap))
clflush_cache_range(pte, sizeof(*pte));
pasid_cache_invalidation_with_pasid(iommu, did, pasid);
- qi_flush_piotlb(iommu, did, pasid, 0, -1, 0);
+
+ if (pgtt == PASID_ENTRY_PGTT_PT || pgtt == PASID_ENTRY_PGTT_FL_ONLY)
+ qi_flush_piotlb(iommu, did, pasid, 0, -1, 0);
+ else
+ iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH);
/* Device IOTLB doesn't need to be flushed in caching mode. */
if (!cap_caching_mode(iommu->cap))
diff --git a/drivers/iommu/intel/pasid.h b/drivers/iommu/intel/pasid.h
index 086ebd697319..30cb30046b15 100644
--- a/drivers/iommu/intel/pasid.h
+++ b/drivers/iommu/intel/pasid.h
@@ -99,6 +99,12 @@ static inline bool pasid_pte_is_present(struct pasid_entry *pte)
return READ_ONCE(pte->val[0]) & PASID_PTE_PRESENT;
}
+/* Get PGTT field of a PASID table entry */
+static inline u16 pasid_pte_get_pgtt(struct pasid_entry *pte)
+{
+ return (u16)((READ_ONCE(pte->val[0]) >> 6) & 0x7);
+}
+
extern unsigned int intel_pasid_max_id;
int intel_pasid_alloc_id(void *ptr, int start, int end, gfp_t gfp);
void intel_pasid_free_id(u32 pasid);
--
2.30.2
From: "jason-jh.lin" <[email protected]>
[ Upstream commit 71ac6f390f6a3017f58d05d677b961bb1f851338 ]
To avoid the output width and height is incorrect,
AAL_OUTPUT_SIZE configuration should be set.
Fixes: 0664d1392c26 ("drm/mediatek: Add AAL engine basic function")
Signed-off-by: jason-jh.lin <[email protected]>
Signed-off-by: Chun-Kuang Hu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index fe58edcf57b5..e747ff7ba3dc 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -34,6 +34,7 @@
#define DISP_AAL_EN 0x0000
#define DISP_AAL_SIZE 0x0030
+#define DISP_AAL_OUTPUT_SIZE 0x04d8
#define DISP_CCORR_EN 0x0000
#define CCORR_EN BIT(0)
@@ -181,6 +182,7 @@ static void mtk_aal_config(struct mtk_ddp_comp *comp, unsigned int w,
unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
{
mtk_ddp_write(cmdq_pkt, w << 16 | h, comp, DISP_AAL_SIZE);
+ mtk_ddp_write(cmdq_pkt, w << 16 | h, comp, DISP_AAL_OUTPUT_SIZE);
}
static void mtk_aal_start(struct mtk_ddp_comp *comp)
--
2.30.2
From: Sylwester Dziedziuch <[email protected]>
[ Upstream commit 8da80c9d50220a8e4190a4eaa0dd6aeefcbbb5bf ]
Make changes to MAC address dependent on the response of PF.
Disallow changes to HW MAC address and MAC filter from untrusted
VF, thanks to that ping is not lost if VF tries to change MAC.
Add a new field in iavf_mac_filter, to indicate whether there
was response from PF for given filter. Based on this field pass
or discard the filter.
If untrusted VF tried to change it's address, it's not changed.
Still filter was changed, because of that ping couldn't go through.
Fixes: c5c922b3e09b ("iavf: fix MAC address setting for VFs when filter is rejected")
Signed-off-by: Przemyslaw Patynowski <[email protected]>
Signed-off-by: Sylwester Dziedziuch <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Gurucharan G <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf.h | 1 +
drivers/net/ethernet/intel/iavf/iavf_main.c | 1 +
.../net/ethernet/intel/iavf/iavf_virtchnl.c | 47 ++++++++++++++++++-
3 files changed, 47 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h
index 8a65525a7c0d..6766446a33f4 100644
--- a/drivers/net/ethernet/intel/iavf/iavf.h
+++ b/drivers/net/ethernet/intel/iavf/iavf.h
@@ -134,6 +134,7 @@ struct iavf_q_vector {
struct iavf_mac_filter {
struct list_head list;
u8 macaddr[ETH_ALEN];
+ bool is_new_mac; /* filter is new, wait for PF decision */
bool remove; /* filter needs to be removed */
bool add; /* filter needs to be added */
};
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index c4ec9a91c7c5..7023aa147043 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -751,6 +751,7 @@ struct iavf_mac_filter *iavf_add_filter(struct iavf_adapter *adapter,
list_add_tail(&f->list, &adapter->mac_filter_list);
f->add = true;
+ f->is_new_mac = true;
adapter->aq_required |= IAVF_FLAG_AQ_ADD_MAC_FILTER;
} else {
f->remove = false;
diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
index ed08ace4f05a..8be3151f2c62 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
@@ -537,6 +537,47 @@ void iavf_del_ether_addrs(struct iavf_adapter *adapter)
kfree(veal);
}
+/**
+ * iavf_mac_add_ok
+ * @adapter: adapter structure
+ *
+ * Submit list of filters based on PF response.
+ **/
+static void iavf_mac_add_ok(struct iavf_adapter *adapter)
+{
+ struct iavf_mac_filter *f, *ftmp;
+
+ spin_lock_bh(&adapter->mac_vlan_list_lock);
+ list_for_each_entry_safe(f, ftmp, &adapter->mac_filter_list, list) {
+ f->is_new_mac = false;
+ }
+ spin_unlock_bh(&adapter->mac_vlan_list_lock);
+}
+
+/**
+ * iavf_mac_add_reject
+ * @adapter: adapter structure
+ *
+ * Remove filters from list based on PF response.
+ **/
+static void iavf_mac_add_reject(struct iavf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct iavf_mac_filter *f, *ftmp;
+
+ spin_lock_bh(&adapter->mac_vlan_list_lock);
+ list_for_each_entry_safe(f, ftmp, &adapter->mac_filter_list, list) {
+ if (f->remove && ether_addr_equal(f->macaddr, netdev->dev_addr))
+ f->remove = false;
+
+ if (f->is_new_mac) {
+ list_del(&f->list);
+ kfree(f);
+ }
+ }
+ spin_unlock_bh(&adapter->mac_vlan_list_lock);
+}
+
/**
* iavf_add_vlans
* @adapter: adapter structure
@@ -1295,6 +1336,7 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter,
case VIRTCHNL_OP_ADD_ETH_ADDR:
dev_err(&adapter->pdev->dev, "Failed to add MAC filter, error %s\n",
iavf_stat_str(&adapter->hw, v_retval));
+ iavf_mac_add_reject(adapter);
/* restore administratively set MAC address */
ether_addr_copy(adapter->hw.mac.addr, netdev->dev_addr);
break;
@@ -1364,10 +1406,11 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter,
}
}
switch (v_opcode) {
- case VIRTCHNL_OP_ADD_ETH_ADDR: {
+ case VIRTCHNL_OP_ADD_ETH_ADDR:
+ if (!v_retval)
+ iavf_mac_add_ok(adapter);
if (!ether_addr_equal(netdev->dev_addr, adapter->hw.mac.addr))
ether_addr_copy(netdev->dev_addr, adapter->hw.mac.addr);
- }
break;
case VIRTCHNL_OP_GET_STATS: {
struct iavf_eth_stats *stats =
--
2.30.2
From: Jakub Kicinski <[email protected]>
[ Upstream commit fb9f7190092d2bbd1f8f0b1cc252732cbe99a87e ]
Drivers should count packets they are dropping.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Michael Chan <[email protected]>
Reviewed-by: Edwin Peer <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index dd03e1e6279a..96b76b713dd8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -406,6 +406,7 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
i = skb_get_queue_mapping(skb);
if (unlikely(i >= bp->tx_nr_rings)) {
dev_kfree_skb_any(skb);
+ atomic_long_inc(&dev->tx_dropped);
return NETDEV_TX_OK;
}
@@ -655,6 +656,7 @@ tx_kick_pending:
if (txr->kick_pending)
bnxt_txr_db_kick(bp, txr, txr->tx_prod);
txr->tx_buf_ring[txr->tx_prod].skb = NULL;
+ atomic_long_inc(&dev->tx_dropped);
return NETDEV_TX_OK;
}
--
2.30.2
From: Hayes Wang <[email protected]>
[ Upstream commit a876a33d2a1102f99fc782fefb784f4dd4841d8c ]
The register of USB_BP2_EN is 16 bits, so we should use
ocp_write_word(), not ocp_write_byte().
Fixes: 9370f2d05a2a ("support request_firmware for RTL8153")
Signed-off-by: Hayes Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/r8152.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 105622e1defa..0bb5b1c78654 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3432,7 +3432,7 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type)
case RTL_VER_09:
default:
if (type == MCU_TYPE_USB) {
- ocp_write_byte(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
--
2.30.2
From: Arkadiusz Kubalewski <[email protected]>
[ Upstream commit a222be597e316389f9f8c26033352c124ce93056 ]
Without this patch, ATR does not work. Receive/transmit uses queue
selection based on SW DCB hashing method.
If traffic classes are not configured for PF, then use
netdev_pick_tx function for selecting queue for packet transmission.
Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx,
which ensures that packet is transmitted/received from CPU that is
running the application.
Reproduction steps:
1. Load i40e driver
2. Map each MSI interrupt of i40e port for each CPU
3. Disable ntuple, enable ATR i.e.:
ethtool -K $interface ntuple off
ethtool --set-priv-flags $interface flow-director-atr
4. Run application that is generating traffic and is bound to a
single CPU, i.e.:
taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10
5. Observe behavior:
Application's traffic should be restricted to the CPU provided in
taskset.
Fixes: 89ec1f0886c1 ("i40e: Fix queue-to-TC mapping on Tx")
Signed-off-by: Przemyslaw Patynowski <[email protected]>
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_txrx.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 615802b07521..5ad28129fab2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -3556,8 +3556,7 @@ u16 i40e_lan_select_queue(struct net_device *netdev,
/* is DCB enabled at all? */
if (vsi->tc_config.numtc == 1)
- return i40e_swdcb_skb_tx_hash(netdev, skb,
- netdev->real_num_tx_queues);
+ return netdev_pick_tx(netdev, skb, sb_dev);
prio = skb->priority;
hw = &vsi->back->hw;
--
2.30.2
From: Toke Høiland-Jørgensen <[email protected]>
[ Upstream commit 86b9bbd332d0510679c7fedcee3e3bd278be5756 ]
When adding support for using the skb->hash value as the flow hash in CAKE,
I accidentally introduced a logic error that broke the host-only isolation
modes of CAKE (srchost and dsthost keywords). Specifically, the flow_hash
variable should stay initialised to 0 in cake_hash() in pure host-based
hashing mode. Add a check for this before using the skb->hash value as
flow_hash.
Fixes: b0c19ed6088a ("sch_cake: Take advantage of skb->hash where appropriate")
Reported-by: Pete Heist <[email protected]>
Tested-by: Pete Heist <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_cake.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c
index 5c15968b5155..c2c37ffd94f2 100644
--- a/net/sched/sch_cake.c
+++ b/net/sched/sch_cake.c
@@ -720,7 +720,7 @@ static u32 cake_hash(struct cake_tin_data *q, const struct sk_buff *skb,
skip_hash:
if (flow_override)
flow_hash = flow_override - 1;
- else if (use_skbhash)
+ else if (use_skbhash && (flow_mode & CAKE_FLOW_FLOWS))
flow_hash = skb->hash;
if (host_override) {
dsthost_hash = host_override - 1;
--
2.30.2
From: Saravana Kannan <[email protected]>
[ Upstream commit 99d81e942474cc7677d12f673f42a7ea699e2589 ]
If we are seeing memory allocation errors, don't try to continue
registering child mdiobus devices. It's unlikely they'll succeed.
Fixes: 342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose")
Signed-off-by: Saravana Kannan <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/mdio/mdio-mux.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/net/mdio/mdio-mux.c b/drivers/net/mdio/mdio-mux.c
index 6a1d3540210b..c96ef3b3fa3a 100644
--- a/drivers/net/mdio/mdio-mux.c
+++ b/drivers/net/mdio/mdio-mux.c
@@ -82,6 +82,17 @@ out:
static int parent_count;
+static void mdio_mux_uninit_children(struct mdio_mux_parent_bus *pb)
+{
+ struct mdio_mux_child_bus *cb = pb->children;
+
+ while (cb) {
+ mdiobus_unregister(cb->mii_bus);
+ mdiobus_free(cb->mii_bus);
+ cb = cb->next;
+ }
+}
+
int mdio_mux_init(struct device *dev,
struct device_node *mux_node,
int (*switch_fn)(int cur, int desired, void *data),
@@ -144,7 +155,7 @@ int mdio_mux_init(struct device *dev,
cb = devm_kzalloc(dev, sizeof(*cb), GFP_KERNEL);
if (!cb) {
ret_val = -ENOMEM;
- continue;
+ goto err_loop;
}
cb->bus_number = v;
cb->parent = pb;
@@ -152,8 +163,7 @@ int mdio_mux_init(struct device *dev,
cb->mii_bus = mdiobus_alloc();
if (!cb->mii_bus) {
ret_val = -ENOMEM;
- devm_kfree(dev, cb);
- continue;
+ goto err_loop;
}
cb->mii_bus->priv = cb;
@@ -182,6 +192,10 @@ int mdio_mux_init(struct device *dev,
dev_err(dev, "Error: No acceptable child buses found\n");
devm_kfree(dev, pb);
+
+err_loop:
+ mdio_mux_uninit_children(pb);
+ of_node_put(child_bus_node);
err_pb_kz:
put_device(&parent_bus->dev);
err_parent_bus:
@@ -193,14 +207,8 @@ EXPORT_SYMBOL_GPL(mdio_mux_init);
void mdio_mux_uninit(void *mux_handle)
{
struct mdio_mux_parent_bus *pb = mux_handle;
- struct mdio_mux_child_bus *cb = pb->children;
-
- while (cb) {
- mdiobus_unregister(cb->mii_bus);
- mdiobus_free(cb->mii_bus);
- cb = cb->next;
- }
+ mdio_mux_uninit_children(pb);
put_device(&pb->mii_bus->dev);
}
EXPORT_SYMBOL_GPL(mdio_mux_uninit);
--
2.30.2
From: "kaixi.fan" <[email protected]>
[ Upstream commit 01634047bf0d5c2d9b7d8095bb4de1663dbeedeb ]
fq qdisc requires tstamp to be cleared in the forwarding path. Now ovs
doesn't clear skb->tstamp. We encountered a problem with linux
version 5.4.56 and ovs version 2.14.1, and packets failed to
dequeue from qdisc when fq qdisc was attached to ovs port.
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: kaixi.fan <[email protected]>
Signed-off-by: xiexiaohui <[email protected]>
Reviewed-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/openvswitch/vport.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/openvswitch/vport.c b/net/openvswitch/vport.c
index 82d801f063b7..1c05d4bef331 100644
--- a/net/openvswitch/vport.c
+++ b/net/openvswitch/vport.c
@@ -503,6 +503,7 @@ void ovs_vport_send(struct vport *vport, struct sk_buff *skb, u8 mac_proto)
}
skb->dev = vport->dev;
+ skb->tstamp = 0;
vport->ops->send(skb);
return;
--
2.30.2
From: Lu Baolu <[email protected]>
[ Upstream commit 9872f9bd9dbd68f75e8db782717d71e8594f6a02 ]
The pasid based IOTLB and devTLB invalidation code is duplicate in
several places. Consolidate them by using the common helpers.
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/intel/pasid.c | 18 ++----------
drivers/iommu/intel/svm.c | 55 ++++++-------------------------------
2 files changed, 11 insertions(+), 62 deletions(-)
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index 1e7c17989084..77fbe9908abd 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -466,20 +466,6 @@ pasid_cache_invalidation_with_pasid(struct intel_iommu *iommu,
qi_submit_sync(iommu, &desc, 1, 0);
}
-static void
-iotlb_invalidation_with_pasid(struct intel_iommu *iommu, u16 did, u32 pasid)
-{
- struct qi_desc desc;
-
- desc.qw0 = QI_EIOTLB_PASID(pasid) | QI_EIOTLB_DID(did) |
- QI_EIOTLB_GRAN(QI_GRAN_NONG_PASID) | QI_EIOTLB_TYPE;
- desc.qw1 = 0;
- desc.qw2 = 0;
- desc.qw3 = 0;
-
- qi_submit_sync(iommu, &desc, 1, 0);
-}
-
static void
devtlb_invalidation_with_pasid(struct intel_iommu *iommu,
struct device *dev, u32 pasid)
@@ -524,7 +510,7 @@ void intel_pasid_tear_down_entry(struct intel_iommu *iommu, struct device *dev,
clflush_cache_range(pte, sizeof(*pte));
pasid_cache_invalidation_with_pasid(iommu, did, pasid);
- iotlb_invalidation_with_pasid(iommu, did, pasid);
+ qi_flush_piotlb(iommu, did, pasid, 0, -1, 0);
/* Device IOTLB doesn't need to be flushed in caching mode. */
if (!cap_caching_mode(iommu->cap))
@@ -540,7 +526,7 @@ static void pasid_flush_caches(struct intel_iommu *iommu,
if (cap_caching_mode(iommu->cap)) {
pasid_cache_invalidation_with_pasid(iommu, did, pasid);
- iotlb_invalidation_with_pasid(iommu, did, pasid);
+ qi_flush_piotlb(iommu, did, pasid, 0, -1, 0);
} else {
iommu_flush_write_buffer(iommu);
}
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 6168dec7cb40..aabf56272b86 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -123,53 +123,16 @@ static void __flush_svm_range_dev(struct intel_svm *svm,
unsigned long address,
unsigned long pages, int ih)
{
- struct qi_desc desc;
+ struct device_domain_info *info = get_domain_info(sdev->dev);
- if (pages == -1) {
- desc.qw0 = QI_EIOTLB_PASID(svm->pasid) |
- QI_EIOTLB_DID(sdev->did) |
- QI_EIOTLB_GRAN(QI_GRAN_NONG_PASID) |
- QI_EIOTLB_TYPE;
- desc.qw1 = 0;
- } else {
- int mask = ilog2(__roundup_pow_of_two(pages));
-
- desc.qw0 = QI_EIOTLB_PASID(svm->pasid) |
- QI_EIOTLB_DID(sdev->did) |
- QI_EIOTLB_GRAN(QI_GRAN_PSI_PASID) |
- QI_EIOTLB_TYPE;
- desc.qw1 = QI_EIOTLB_ADDR(address) |
- QI_EIOTLB_IH(ih) |
- QI_EIOTLB_AM(mask);
- }
- desc.qw2 = 0;
- desc.qw3 = 0;
- qi_submit_sync(sdev->iommu, &desc, 1, 0);
-
- if (sdev->dev_iotlb) {
- desc.qw0 = QI_DEV_EIOTLB_PASID(svm->pasid) |
- QI_DEV_EIOTLB_SID(sdev->sid) |
- QI_DEV_EIOTLB_QDEP(sdev->qdep) |
- QI_DEIOTLB_TYPE;
- if (pages == -1) {
- desc.qw1 = QI_DEV_EIOTLB_ADDR(-1ULL >> 1) |
- QI_DEV_EIOTLB_SIZE;
- } else if (pages > 1) {
- /* The least significant zero bit indicates the size. So,
- * for example, an "address" value of 0x12345f000 will
- * flush from 0x123440000 to 0x12347ffff (256KiB). */
- unsigned long last = address + ((unsigned long)(pages - 1) << VTD_PAGE_SHIFT);
- unsigned long mask = __rounddown_pow_of_two(address ^ last);
-
- desc.qw1 = QI_DEV_EIOTLB_ADDR((address & ~mask) |
- (mask - 1)) | QI_DEV_EIOTLB_SIZE;
- } else {
- desc.qw1 = QI_DEV_EIOTLB_ADDR(address);
- }
- desc.qw2 = 0;
- desc.qw3 = 0;
- qi_submit_sync(sdev->iommu, &desc, 1, 0);
- }
+ if (WARN_ON(!pages))
+ return;
+
+ qi_flush_piotlb(sdev->iommu, sdev->did, svm->pasid, address, pages, ih);
+ if (info->ats_enabled)
+ qi_flush_dev_iotlb_pasid(sdev->iommu, sdev->sid, info->pfsid,
+ svm->pasid, sdev->qdep, address,
+ order_base_2(pages));
}
static void intel_flush_svm_range_dev(struct intel_svm *svm,
--
2.30.2
From: Ido Schimmel <[email protected]>
[ Upstream commit fa05bdb89b01b098aad19ec0ebc4d1cc7b11177e ]
This reverts commit 9ea3e52c5bc8bb4a084938dc1e3160643438927a.
Cited commit added a check to make sure 'action' is not NULL, but
'action' is already dereferenced before the check, when calling
flow_offload_has_one_action().
Therefore, the check does not make any sense and results in a smatch
warning:
include/net/flow_offload.h:322 flow_action_mixed_hw_stats_check() warn:
variable dereferenced before check 'action' (see line 319)
Fix by reverting this commit.
Cc: gushengxian <[email protected]>
Fixes: 9ea3e52c5bc8 ("flow_offload: action should not be NULL when it is referenced")
Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/flow_offload.h | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/include/net/flow_offload.h b/include/net/flow_offload.h
index 161b90979038..123b1e9ea304 100644
--- a/include/net/flow_offload.h
+++ b/include/net/flow_offload.h
@@ -312,14 +312,12 @@ flow_action_mixed_hw_stats_check(const struct flow_action *action,
if (flow_offload_has_one_action(action))
return true;
- if (action) {
- flow_action_for_each(i, action_entry, action) {
- if (i && action_entry->hw_stats != last_hw_stats) {
- NL_SET_ERR_MSG_MOD(extack, "Mixing HW stats types for actions is not supported");
- return false;
- }
- last_hw_stats = action_entry->hw_stats;
+ flow_action_for_each(i, action_entry, action) {
+ if (i && action_entry->hw_stats != last_hw_stats) {
+ NL_SET_ERR_MSG_MOD(extack, "Mixing HW stats types for actions is not supported");
+ return false;
}
+ last_hw_stats = action_entry->hw_stats;
}
return true;
}
--
2.30.2
From: Vincent Whitchurch <[email protected]>
[ Upstream commit 25f8203b4be1937c4939bb98623e67dcfd7da4d1 ]
When a Data CRC interrupt is received, the driver disables the DMA, then
sends the stop/abort command and then waits for Data Transfer Over.
However, sometimes, when a data CRC error is received in the middle of a
multi-block write transfer, the Data Transfer Over interrupt is never
received, and the driver hangs and never completes the request.
The driver sets the BMOD.SWR bit (SDMMC_IDMAC_SWRESET) when stopping the
DMA, but according to the manual CMD.STOP_ABORT_CMD should be programmed
"before assertion of SWR". Do these operations in the recommended
order. With this change the Data Transfer Over is always received
correctly in my tests.
Signed-off-by: Vincent Whitchurch <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/dw_mmc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 43c5795691fb..8b5d542e20f3 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2018,8 +2018,8 @@ static void dw_mci_tasklet_func(unsigned long priv)
continue;
}
- dw_mci_stop_dma(host);
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_SENDING_STOP;
break;
}
@@ -2043,10 +2043,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
- dw_mci_stop_dma(host);
if (!(host->data_status & (SDMMC_INT_DRTO |
SDMMC_INT_EBE)))
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_DATA_ERROR;
break;
}
@@ -2079,10 +2079,10 @@ static void dw_mci_tasklet_func(unsigned long priv)
*/
if (test_and_clear_bit(EVENT_DATA_ERROR,
&host->pending_events)) {
- dw_mci_stop_dma(host);
if (!(host->data_status & (SDMMC_INT_DRTO |
SDMMC_INT_EBE)))
send_stop_abort(host, data);
+ dw_mci_stop_dma(host);
state = STATE_DATA_ERROR;
break;
}
--
2.30.2
From: Dong Aisheng <[email protected]>
[ Upstream commit 283f1b9a0401859c53fdd6483ab66f1c4fadaea5 ]
The earlycon depends on the bootloader setup UART clocks being retained.
There're actually two uart clocks (ipg, per) on MX6QDL,
but the 'Fixes' commit change to register only one which means
another clock may be disabled during booting phase
and result in the earlycon unwork.
Cc: [email protected] # v5.10+
Fixes: 379c9a24cc23 ("clk: imx: Fix reparenting of UARTs not associated with stdout")
Signed-off-by: Dong Aisheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Abel Vesa <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx6q.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index f444bbe8244c..7d07dd92a7b4 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -974,6 +974,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
hws[IMX6QDL_CLK_PLL3_USB_OTG]->clk);
}
- imx_register_uart_clocks(1);
+ imx_register_uart_clocks(2);
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 86aab09a4870bb8346c9579864588c3d7f555299 ]
GCC complains about empty macros in an 'if' statement, so convert
them to 'do {} while (0)' macros.
Fixes these build warnings:
net/dccp/output.c: In function 'dccp_xmit_packet':
../net/dccp/output.c:283:71: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
283 | dccp_pr_debug("transmit_skb() returned err=%d\n", err);
net/dccp/ackvec.c: In function 'dccp_ackvec_update_old':
../net/dccp/ackvec.c:163:80: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]
163 | (unsigned long long)seqno, state);
Fixes: dc841e30eaea ("dccp: Extend CCID packet dequeueing interface")
Fixes: 380240864451 ("dccp ccid-2: Update code for the Ack Vector input/registration routine")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: [email protected]
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Gerrit Renker <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/dccp/dccp.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index 9cc9d1ee6cdb..c5c1d2b8045e 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -41,9 +41,9 @@ extern bool dccp_debug;
#define dccp_pr_debug_cat(format, a...) DCCP_PRINTK(dccp_debug, format, ##a)
#define dccp_debug(fmt, a...) dccp_pr_debug_cat(KERN_DEBUG fmt, ##a)
#else
-#define dccp_pr_debug(format, a...)
-#define dccp_pr_debug_cat(format, a...)
-#define dccp_debug(format, a...)
+#define dccp_pr_debug(format, a...) do {} while (0)
+#define dccp_pr_debug_cat(format, a...) do {} while (0)
+#define dccp_debug(format, a...) do {} while (0)
#endif
extern struct inet_hashinfo dccp_hashinfo;
--
2.30.2
From: Linus Torvalds <[email protected]>
[ Upstream commit 3b844826b6c6affa80755254da322b017358a2f4 ]
I had forgotten just how sensitive hackbench is to extra pipe wakeups,
and commit 3a34b13a88ca ("pipe: make pipe writes always wake up
readers") ended up causing a quite noticeable regression on larger
machines.
Now, hackbench isn't necessarily a hugely meaningful benchmark, and it's
not clear that this matters in real life all that much, but as Mel
points out, it's used often enough when comparing kernels and so the
performance regression shows up like a sore thumb.
It's easy enough to fix at least for the common cases where pipes are
used purely for data transfer, and you never have any exciting poll
usage at all. So set a special 'poll_usage' flag when there is polling
activity, and make the ugly "EPOLLET has crazy legacy expectations"
semantics explicit to only that case.
I would love to limit it to just the broken EPOLLET case, but the pipe
code can't see the difference between epoll and regular select/poll, so
any non-read/write waiting will trigger the extra wakeup behavior. That
is sufficient for at least the hackbench case.
Apart from making the odd extra wakeup cases more explicitly about
EPOLLET, this also makes the extra wakeup be at the _end_ of the pipe
write, not at the first write chunk. That is actually much saner
semantics (as much as you can call any of the legacy edge-triggered
expectations for EPOLLET "sane") since it means that you know the wakeup
will happen once the write is done, rather than possibly in the middle
of one.
[ For stable people: I'm putting a "Fixes" tag on this, but I leave it
up to you to decide whether you actually want to backport it or not.
It likely has no impact outside of synthetic benchmarks - Linus ]
Link: https://lore.kernel.org/lkml/20210802024945.GA8372@xsang-OptiPlex-9020/
Fixes: 3a34b13a88ca ("pipe: make pipe writes always wake up readers")
Reported-by: kernel test robot <[email protected]>
Tested-by: Sandeep Patil <[email protected]>
Tested-by: Mel Gorman <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/pipe.c | 15 +++++++++------
include/linux/pipe_fs_i.h | 2 ++
2 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/fs/pipe.c b/fs/pipe.c
index 28b2e973f10e..48abe65333c4 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -444,9 +444,6 @@ pipe_write(struct kiocb *iocb, struct iov_iter *from)
#endif
/*
- * Epoll nonsensically wants a wakeup whether the pipe
- * was already empty or not.
- *
* If it wasn't empty we try to merge new data into
* the last buffer.
*
@@ -455,9 +452,9 @@ pipe_write(struct kiocb *iocb, struct iov_iter *from)
* spanning multiple pages.
*/
head = pipe->head;
- was_empty = true;
+ was_empty = pipe_empty(head, pipe->tail);
chars = total_len & (PAGE_SIZE-1);
- if (chars && !pipe_empty(head, pipe->tail)) {
+ if (chars && !was_empty) {
unsigned int mask = pipe->ring_size - 1;
struct pipe_buffer *buf = &pipe->bufs[(head - 1) & mask];
int offset = buf->offset + buf->len;
@@ -590,8 +587,11 @@ out:
* This is particularly important for small writes, because of
* how (for example) the GNU make jobserver uses small writes to
* wake up pending jobs
+ *
+ * Epoll nonsensically wants a wakeup whether the pipe
+ * was already empty or not.
*/
- if (was_empty) {
+ if (was_empty || pipe->poll_usage) {
wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
}
@@ -654,6 +654,9 @@ pipe_poll(struct file *filp, poll_table *wait)
struct pipe_inode_info *pipe = filp->private_data;
unsigned int head, tail;
+ /* Epoll has some historical nasty semantics, this enables them */
+ pipe->poll_usage = 1;
+
/*
* Reading pipe state only -- no need for acquiring the semaphore.
*
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 5d2705f1d01c..fc5642431b92 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -48,6 +48,7 @@ struct pipe_buffer {
* @files: number of struct file referring this pipe (protected by ->i_lock)
* @r_counter: reader counter
* @w_counter: writer counter
+ * @poll_usage: is this pipe used for epoll, which has crazy wakeups?
* @fasync_readers: reader side fasync
* @fasync_writers: writer side fasync
* @bufs: the circular array of pipe buffers
@@ -70,6 +71,7 @@ struct pipe_inode_info {
unsigned int files;
unsigned int r_counter;
unsigned int w_counter;
+ unsigned int poll_usage;
struct page *tmp_page;
struct fasync_struct *fasync_readers;
struct fasync_struct *fasync_writers;
--
2.30.2
From: Marek Behún <[email protected]>
[ Upstream commit 484f2b7c61b9ae58cc00c5127bcbcd9177af8dfe ]
The 1.2 GHz variant of the Armada 3720 SOC is unstable with DVFS: when
the SOC boots, the WTMI firmware sets clocks and AVS values that work
correctly with 1.2 GHz CPU frequency, but random crashes occur once
cpufreq driver starts scaling.
We do not know currently what is the reason:
- it may be that the voltage value for L0 for 1.2 GHz variant provided
by the vendor in the OTP is simply incorrect when scaling is used,
- it may be that some delay is needed somewhere,
- it may be something else.
The most sane solution now seems to be to simply forbid the cpufreq
driver on 1.2 GHz variant.
Signed-off-by: Marek Behún <[email protected]>
Fixes: 92ce45fb875d ("cpufreq: Add DVFS support for Armada 37xx")
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/armada-37xx-cpufreq.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index e4782f562e7a..2de7fd18f66a 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -102,7 +102,11 @@ struct armada_37xx_dvfs {
};
static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
- {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
+ /*
+ * The cpufreq scaling for 1.2 GHz variant of the SOC is currently
+ * unstable because we do not know how to configure it properly.
+ */
+ /* {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} }, */
{.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
{.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} },
{.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} },
--
2.30.2
From: Lahav Schlesinger <[email protected]>
[ Upstream commit 09e856d54bda5f288ef8437a90ab2b9b3eab83d1 ]
To fix the "reverse-NAT" for replies.
When a packet is sent over a VRF, the POST_ROUTING hooks are called
twice: Once from the VRF interface, and once from the "actual"
interface the packet will be sent from:
1) First SNAT: l3mdev_l3_out() -> vrf_l3_out() -> .. -> vrf_output_direct()
This causes the POST_ROUTING hooks to run.
2) Second SNAT: 'ip_output()' calls POST_ROUTING hooks again.
Similarly for replies, first ip_rcv() calls PRE_ROUTING hooks, and
second vrf_l3_rcv() calls them again.
As an example, consider the following SNAT rule:
> iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j SNAT --to-source 2.2.2.2 -o vrf_1
In this case sending over a VRF will create 2 conntrack entries.
The first is from the VRF interface, which performs the IP SNAT.
The second will run the SNAT, but since the "expected reply" will remain
the same, conntrack randomizes the source port of the packet:
e..g With a socket bound to 1.1.1.1:10000, sending to 3.3.3.3:53, the conntrack
rules are:
udp 17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=0 bytes=0 mark=0 use=1
udp 17 29 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1
i.e. First SNAT IP from 1.1.1.1 --> 2.2.2.2, and second the src port is
SNAT-ed from 10000 --> 61033.
But when a reply is sent (3.3.3.3:53 -> 2.2.2.2:61033) only the later
conntrack entry is matched:
udp 17 29 src=2.2.2.2 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 src=3.3.3.3 dst=2.2.2.2 sport=53 dport=61033 packets=1 bytes=49 mark=0 use=1
udp 17 28 src=1.1.1.1 dst=3.3.3.3 sport=10000 dport=53 packets=1 bytes=68 [UNREPLIED] src=3.3.3.3 dst=2.2.2.2 sport=53 dport=10000 packets=0 bytes=0 mark=0 use=1
And a "port 61033 unreachable" ICMP packet is sent back.
The issue is that when PRE_ROUTING hooks are called from vrf_l3_rcv(),
the skb already has a conntrack flow attached to it, which means
nf_conntrack_in() will not resolve the flow again.
This means only the dest port is "reverse-NATed" (61033 -> 10000) but
the dest IP remains 2.2.2.2, and since the socket is bound to 1.1.1.1 it's
not received.
This can be verified by logging the 4-tuple of the packet in '__udp4_lib_rcv()'.
The fix is then to reset the flow when skb is received on a VRF, to let
conntrack resolve the flow again (which now will hit the earlier flow).
To reproduce: (Without the fix "Got pkt_to_nat_port" will not be printed by
running 'bash ./repro'):
$ cat run_in_A1.py
import logging
logging.getLogger("scapy.runtime").setLevel(logging.ERROR)
from scapy.all import *
import argparse
def get_packet_to_send(udp_dst_port, msg_name):
return Ether(src='11:22:33:44:55:66', dst=iface_mac)/ \
IP(src='3.3.3.3', dst='2.2.2.2')/ \
UDP(sport=53, dport=udp_dst_port)/ \
Raw(f'{msg_name}\x0012345678901234567890')
parser = argparse.ArgumentParser()
parser.add_argument('-iface_mac', dest="iface_mac", type=str, required=True,
help="From run_in_A3.py")
parser.add_argument('-socket_port', dest="socket_port", type=str,
required=True, help="From run_in_A3.py")
parser.add_argument('-v1_mac', dest="v1_mac", type=str, required=True,
help="From script")
args, _ = parser.parse_known_args()
iface_mac = args.iface_mac
socket_port = int(args.socket_port)
v1_mac = args.v1_mac
print(f'Source port before NAT: {socket_port}')
while True:
pkts = sniff(iface='_v0', store=True, count=1, timeout=10)
if 0 == len(pkts):
print('Something failed, rerun the script :(', flush=True)
break
pkt = pkts[0]
if not pkt.haslayer('UDP'):
continue
pkt_sport = pkt.getlayer('UDP').sport
print(f'Source port after NAT: {pkt_sport}', flush=True)
pkt_to_send = get_packet_to_send(pkt_sport, 'pkt_to_nat_port')
sendp(pkt_to_send, '_v0', verbose=False) # Will not be received
pkt_to_send = get_packet_to_send(socket_port, 'pkt_to_socket_port')
sendp(pkt_to_send, '_v0', verbose=False)
break
$ cat run_in_A2.py
import socket
import netifaces
print(f"{netifaces.ifaddresses('e00000')[netifaces.AF_LINK][0]['addr']}",
flush=True)
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE,
str('vrf_1' + '\0').encode('utf-8'))
s.connect(('3.3.3.3', 53))
print(f'{s. getsockname()[1]}', flush=True)
s.settimeout(5)
while True:
try:
# Periodically send in order to keep the conntrack entry alive.
s.send(b'a'*40)
resp = s.recvfrom(1024)
msg_name = resp[0].decode('utf-8').split('\0')[0]
print(f"Got {msg_name}", flush=True)
except Exception as e:
pass
$ cat repro.sh
ip netns del A1 2> /dev/null
ip netns del A2 2> /dev/null
ip netns add A1
ip netns add A2
ip -n A1 link add _v0 type veth peer name _v1 netns A2
ip -n A1 link set _v0 up
ip -n A2 link add e00000 type bond
ip -n A2 link add lo0 type dummy
ip -n A2 link add vrf_1 type vrf table 10001
ip -n A2 link set vrf_1 up
ip -n A2 link set e00000 master vrf_1
ip -n A2 addr add 1.1.1.1/24 dev e00000
ip -n A2 link set e00000 up
ip -n A2 link set _v1 master e00000
ip -n A2 link set _v1 up
ip -n A2 link set lo0 up
ip -n A2 addr add 2.2.2.2/32 dev lo0
ip -n A2 neigh add 1.1.1.10 lladdr 77:77:77:77:77:77 dev e00000
ip -n A2 route add 3.3.3.3/32 via 1.1.1.10 dev e00000 table 10001
ip netns exec A2 iptables -t nat -A POSTROUTING -p udp -m udp --dport 53 -j \
SNAT --to-source 2.2.2.2 -o vrf_1
sleep 5
ip netns exec A2 python3 run_in_A2.py > x &
XPID=$!
sleep 5
IFACE_MAC=`sed -n 1p x`
SOCKET_PORT=`sed -n 2p x`
V1_MAC=`ip -n A2 link show _v1 | sed -n 2p | awk '{print $2'}`
ip netns exec A1 python3 run_in_A1.py -iface_mac ${IFACE_MAC} -socket_port \
${SOCKET_PORT} -v1_mac ${SOCKET_PORT}
sleep 5
kill -9 $XPID
wait $XPID 2> /dev/null
ip netns del A1
ip netns del A2
tail x -n 2
rm x
set +x
Fixes: 73e20b761acf ("net: vrf: Add support for PREROUTING rules on vrf device")
Signed-off-by: Lahav Schlesinger <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/vrf.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index 2746f77745e4..d406da82b4fb 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -1313,6 +1313,8 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
bool is_ndisc = ipv6_ndisc_frame(skb);
+ nf_reset_ct(skb);
+
/* loopback, multicast & non-ND link-local traffic; do not push through
* packet taps again. Reset pkt_type for upper layers to process skb.
* For strict packets with a source LLA, determine the dst using the
@@ -1369,6 +1371,8 @@ static struct sk_buff *vrf_ip_rcv(struct net_device *vrf_dev,
skb->skb_iif = vrf_dev->ifindex;
IPCB(skb)->flags |= IPSKB_L3SLAVE;
+ nf_reset_ct(skb);
+
if (ipv4_is_multicast(ip_hdr(skb)->daddr))
goto out;
--
2.30.2
From: "Steven Rostedt (VMware)" <[email protected]>
[ Upstream commit 5acce0bff2a0420ce87d4591daeb867f47d552c2 ]
The following commands:
# echo 'read_max u64 size;' > synthetic_events
# echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger
Causes:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ #155
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
RIP: 0010:strcmp+0xc/0x20
Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0
c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07
3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89
RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000
RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8
R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210
FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0
Call Trace:
__find_event_file+0x4e/0x80
action_create+0x6b7/0xeb0
? kstrdup+0x44/0x60
event_hist_trigger_func+0x1a07/0x2130
trigger_process_regex+0xbd/0x110
event_trigger_write+0x71/0xd0
vfs_write+0xe9/0x310
ksys_write+0x68/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f1fa6879e87
The problem was the "trace(read_max,count)" where the "count" should be
"$count" as "onmax()" only handles variables (although it really should be
able to figure out that "count" is a field of sys_enter_read). But there's
a path that does not find the variable and ends up passing a NULL for the
event, which ends up getting passed to "strcmp()".
Add a check for NULL to return and error on the command with:
# cat error_log
hist:syscalls:sys_enter_read: error: Couldn't create or find variable
Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)
^
Link: https://lkml.kernel.org/r/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: [email protected]
Fixes: 50450603ec9cb tracing: Add 'onmax' hist trigger action support
Reviewed-by: Tom Zanussi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace_events_hist.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index 75529b311769..1b7f90e00eb0 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -3405,6 +3405,8 @@ trace_action_create_field_var(struct hist_trigger_data *hist_data,
event = data->match_data.event;
}
+ if (!event)
+ goto free;
/*
* At this point, we're looking at a field on another
* event. Because we can't modify a hist trigger on
--
2.30.2
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 9659281ce78de0f15a4aa124da8f7450b1399c09 ]
As tid is unsigned its hard to figure out if the tid is valid or
invalid. So Start the transaction ids from 1 instead of zero
so that we could differentiate between a valid tid and invalid tids
This is useful in cases where controller would add a tid for controller
specific transfers.
Fixes: d3062a210930 ("slimbus: messaging: add slim_alloc/free_txn_tid()")
Cc: <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/slimbus/messaging.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/slimbus/messaging.c b/drivers/slimbus/messaging.c
index d5879142dbef..3b77713f1e3f 100644
--- a/drivers/slimbus/messaging.c
+++ b/drivers/slimbus/messaging.c
@@ -66,7 +66,7 @@ int slim_alloc_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn)
int ret = 0;
spin_lock_irqsave(&ctrl->txn_lock, flags);
- ret = idr_alloc_cyclic(&ctrl->tid_idr, txn, 0,
+ ret = idr_alloc_cyclic(&ctrl->tid_idr, txn, 1,
SLIM_MAX_TIDS, GFP_ATOMIC);
if (ret < 0) {
spin_unlock_irqrestore(&ctrl->txn_lock, flags);
--
2.30.2
From: Jaroslav Kysela <[email protected]>
[ Upstream commit a2befe9380dd04ee76c871568deca00eedf89134 ]
The original code in the cap_put_caller() function does not
handle correctly the positive values returned from the passed
function for multiple iterations. It means that the change
notifications may be lost.
Fixes: 352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213851
Cc: <[email protected]>
Signed-off-by: Jaroslav Kysela <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_generic.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 7c49a7e92dd2..323df011b94a 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -3458,7 +3458,7 @@ static int cap_put_caller(struct snd_kcontrol *kcontrol,
struct hda_gen_spec *spec = codec->spec;
const struct hda_input_mux *imux;
struct nid_path *path;
- int i, adc_idx, err = 0;
+ int i, adc_idx, ret, err = 0;
imux = &spec->input_mux;
adc_idx = kcontrol->id.index;
@@ -3468,9 +3468,13 @@ static int cap_put_caller(struct snd_kcontrol *kcontrol,
if (!path || !path->ctls[type])
continue;
kcontrol->private_value = path->ctls[type];
- err = func(kcontrol, ucontrol);
- if (err < 0)
+ ret = func(kcontrol, ucontrol);
+ if (ret < 0) {
+ err = ret;
break;
+ }
+ if (ret > 0)
+ err = 1;
}
mutex_unlock(&codec->control_mutex);
if (err >= 0 && spec->cap_sync_hook)
--
2.30.2
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit a263c1ff6abe0e66712f40d595bbddc7a35907f8 ]
In some usecases transaction ids are dynamically allocated inside
the controller driver after sending the messages which have generic
acknowledge responses. So check for this before refcounting pm_runtime.
Without this we would end up imbalancing runtime pm count by
doing pm_runtime_put() in both slim_do_transfer() and slim_msg_response()
for a single pm_runtime_get() in slim_do_transfer()
Fixes: d3062a210930 ("slimbus: messaging: add slim_alloc/free_txn_tid()")
Cc: <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/slimbus/messaging.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/slimbus/messaging.c b/drivers/slimbus/messaging.c
index 3b77713f1e3f..ddf0371ad52b 100644
--- a/drivers/slimbus/messaging.c
+++ b/drivers/slimbus/messaging.c
@@ -131,7 +131,8 @@ int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn)
goto slim_xfer_err;
}
}
-
+ /* Initialize tid to invalid value */
+ txn->tid = 0;
need_tid = slim_tid_txn(txn->mt, txn->mc);
if (need_tid) {
@@ -163,7 +164,7 @@ int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn)
txn->mt, txn->mc, txn->la, ret);
slim_xfer_err:
- if (!clk_pause_msg && (!need_tid || ret == -ETIMEDOUT)) {
+ if (!clk_pause_msg && (txn->tid == 0 || ret == -ETIMEDOUT)) {
/*
* remove runtime-pm vote if this was TX only, or
* if there was error during this transaction
--
2.30.2
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit d77772538f00b7265deace6e77e555ee18365ad0 ]
During suspend/resume NGD remote instance is power cycled along
with remotely controlled bam dma engine.
So Reset the dma configuration during this suspend resume path
so that we are not dealing with any stale dma setup.
Without this transactions timeout after first suspend resume path.
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/slimbus/qcom-ngd-ctrl.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index 50cfd67c2871..d0540376221c 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1065,7 +1065,8 @@ static void qcom_slim_ngd_setup(struct qcom_slim_ngd_ctrl *ctrl)
{
u32 cfg = readl_relaxed(ctrl->ngd->base);
- if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN)
+ if (ctrl->state == QCOM_SLIM_NGD_CTRL_DOWN ||
+ ctrl->state == QCOM_SLIM_NGD_CTRL_ASLEEP)
qcom_slim_ngd_init_dma(ctrl);
/* By default enable message queues */
@@ -1116,6 +1117,7 @@ static int qcom_slim_ngd_power_up(struct qcom_slim_ngd_ctrl *ctrl)
dev_info(ctrl->dev, "Subsys restart: ADSP active framer\n");
return 0;
}
+ qcom_slim_ngd_setup(ctrl);
return 0;
}
@@ -1506,6 +1508,7 @@ static int __maybe_unused qcom_slim_ngd_runtime_suspend(struct device *dev)
struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev);
int ret = 0;
+ qcom_slim_ngd_exit_dma(ctrl);
if (!ctrl->qmi.handle)
return 0;
--
2.30.2
From: Dinghao Liu <[email protected]>
[ Upstream commit 0a298d133893c72c96e2156ed7cb0f0c4a306a3e ]
qlcnic_83xx_unlock_flash() is called on all paths after we call
qlcnic_83xx_lock_flash(), except for one error path on failure
of QLCRD32(), which may cause a deadlock. This bug is suggested
by a static analysis tool, please advise.
Fixes: 81d0aeb0a4fff ("qlcnic: flash template based firmware reset recovery")
Signed-off-by: Dinghao Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index d8882d0b6b49..d51bac7ba5af 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -3156,8 +3156,10 @@ int qlcnic_83xx_flash_read32(struct qlcnic_adapter *adapter, u32 flash_addr,
indirect_addr = QLC_83XX_FLASH_DIRECT_DATA(addr);
ret = QLCRD32(adapter, indirect_addr, &err);
- if (err == -EIO)
+ if (err == -EIO) {
+ qlcnic_83xx_unlock_flash(adapter);
return err;
+ }
word = ret;
*(u32 *)p_data = word;
--
2.30.2
From: Saravana Kannan <[email protected]>
[ Upstream commit 7bd0cef5dac685f09ef8b0b2a7748ff42d284dc7 ]
When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't
ignore it and continue registering the rest of the mdiobus children. This
would permanently prevent the deferring child mdiobus from working instead
of reattempting it in the future. So, if a child mdiobus needs to be
reattempted in the future, defer the entire mdio-mux initialization.
This fixes the issue where PHYs sitting under the mdio-mux aren't
initialized correctly if the PHY's interrupt controller is not yet ready
when the mdio-mux is being probed. Additional context in the link below.
Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.")
Link: https://lore.kernel.org/lkml/CAGETcx95kHrv8wA-O+-JtfH7H9biJEGJtijuPVN0V5dUKUAB3A@mail.gmail.com/#t
Signed-off-by: Saravana Kannan <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/mdio/mdio-mux.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/mdio/mdio-mux.c b/drivers/net/mdio/mdio-mux.c
index c96ef3b3fa3a..ccb3ee704eb1 100644
--- a/drivers/net/mdio/mdio-mux.c
+++ b/drivers/net/mdio/mdio-mux.c
@@ -175,11 +175,15 @@ int mdio_mux_init(struct device *dev,
cb->mii_bus->write = mdio_mux_write;
r = of_mdiobus_register(cb->mii_bus, child_bus_node);
if (r) {
+ mdiobus_free(cb->mii_bus);
+ if (r == -EPROBE_DEFER) {
+ ret_val = r;
+ goto err_loop;
+ }
+ devm_kfree(dev, cb);
dev_err(dev,
"Error: Failed to register MDIO bus for child %pOF\n",
child_bus_node);
- mdiobus_free(cb->mii_bus);
- devm_kfree(dev, cb);
} else {
cb->next = pb->children;
pb->children = cb;
--
2.30.2
From: Jakub Kicinski <[email protected]>
[ Upstream commit e8d8c5d80f5e9d4586c68061b62c642752289095 ]
skbs are freed on error and not put on the ring. We may, however,
be in a situation where we're freeing the last skb of a batch,
and there is a doorbell ring pending because of xmit_more() being
true earlier. Make sure we ring the door bell in such situations.
Since errors are rare don't pay attention to xmit_more() and just
always flush the pending frames.
The busy case should be safe to be left alone because it can
only happen if start_xmit races with completions and they
both enable the queue. In that case the kick can't be pending.
Noticed while reading the code.
Fixes: 4d172f21cefe ("bnxt_en: Implement xmit_more.")
Reviewed-by: Michael Chan <[email protected]>
Reviewed-by: Edwin Peer <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 39 +++++++++++++++--------
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 +
2 files changed, 27 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 621346656af3..dd03e1e6279a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -69,7 +69,8 @@
#include "bnxt_debugfs.h"
#define BNXT_TX_TIMEOUT (5 * HZ)
-#define BNXT_DEF_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_HW)
+#define BNXT_DEF_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_HW | \
+ NETIF_MSG_TX_ERR)
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Broadcom BCM573xx network driver");
@@ -360,6 +361,13 @@ static u16 bnxt_xmit_get_cfa_action(struct sk_buff *skb)
return md_dst->u.port_info.port_id;
}
+static void bnxt_txr_db_kick(struct bnxt *bp, struct bnxt_tx_ring_info *txr,
+ u16 prod)
+{
+ bnxt_db_write(bp, &txr->tx_db, prod);
+ txr->kick_pending = 0;
+}
+
static bool bnxt_txr_netif_try_stop_queue(struct bnxt *bp,
struct bnxt_tx_ring_info *txr,
struct netdev_queue *txq)
@@ -407,6 +415,10 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
free_size = bnxt_tx_avail(bp, txr);
if (unlikely(free_size < skb_shinfo(skb)->nr_frags + 2)) {
+ /* We must have raced with NAPI cleanup */
+ if (net_ratelimit() && txr->kick_pending)
+ netif_warn(bp, tx_err, dev,
+ "bnxt: ring busy w/ flush pending!\n");
if (bnxt_txr_netif_try_stop_queue(bp, txr, txq))
return NETDEV_TX_BUSY;
}
@@ -510,21 +522,16 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev)
normal_tx:
if (length < BNXT_MIN_PKT_SIZE) {
pad = BNXT_MIN_PKT_SIZE - length;
- if (skb_pad(skb, pad)) {
+ if (skb_pad(skb, pad))
/* SKB already freed. */
- tx_buf->skb = NULL;
- return NETDEV_TX_OK;
- }
+ goto tx_kick_pending;
length = BNXT_MIN_PKT_SIZE;
}
mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE);
- if (unlikely(dma_mapping_error(&pdev->dev, mapping))) {
- dev_kfree_skb_any(skb);
- tx_buf->skb = NULL;
- return NETDEV_TX_OK;
- }
+ if (unlikely(dma_mapping_error(&pdev->dev, mapping)))
+ goto tx_free;
dma_unmap_addr_set(tx_buf, mapping, mapping);
flags = (len << TX_BD_LEN_SHIFT) | TX_BD_TYPE_LONG_TX_BD |
@@ -609,13 +616,15 @@ normal_tx:
txr->tx_prod = prod;
if (!netdev_xmit_more() || netif_xmit_stopped(txq))
- bnxt_db_write(bp, &txr->tx_db, prod);
+ bnxt_txr_db_kick(bp, txr, prod);
+ else
+ txr->kick_pending = 1;
tx_done:
if (unlikely(bnxt_tx_avail(bp, txr) <= MAX_SKB_FRAGS + 1)) {
if (netdev_xmit_more() && !tx_buf->is_push)
- bnxt_db_write(bp, &txr->tx_db, prod);
+ bnxt_txr_db_kick(bp, txr, prod);
bnxt_txr_netif_try_stop_queue(bp, txr, txq);
}
@@ -627,7 +636,6 @@ tx_dma_error:
/* start back at beginning and unmap skb */
prod = txr->tx_prod;
tx_buf = &txr->tx_buf_ring[prod];
- tx_buf->skb = NULL;
dma_unmap_single(&pdev->dev, dma_unmap_addr(tx_buf, mapping),
skb_headlen(skb), PCI_DMA_TODEVICE);
prod = NEXT_TX(prod);
@@ -641,7 +649,12 @@ tx_dma_error:
PCI_DMA_TODEVICE);
}
+tx_free:
dev_kfree_skb_any(skb);
+tx_kick_pending:
+ if (txr->kick_pending)
+ bnxt_txr_db_kick(bp, txr, txr->tx_prod);
+ txr->tx_buf_ring[txr->tx_prod].skb = NULL;
return NETDEV_TX_OK;
}
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index a95c5afa2f01..95d10e7bbb04 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -770,6 +770,7 @@ struct bnxt_tx_ring_info {
u16 tx_prod;
u16 tx_cons;
u16 txq_index;
+ u8 kick_pending;
struct bnxt_db_info tx_db;
struct tx_bd *tx_desc_ring[MAX_TX_PAGES];
--
2.30.2
From: Nicolas Saenz Julienne <[email protected]>
[ Upstream commit 419dd626e357e89fc9c4e3863592c8b38cfe1571 ]
The controller doesn't seem to pick-up on clock changes, so set the
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN flag to query the clock frequency
directly from the clock.
Fixes: f84e411c85be ("mmc: sdhci-iproc: Add support for emmc2 of the BCM2711")
Signed-off-by: Nicolas Saenz Julienne <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci-iproc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index b9eb2ec61a83..9f0eef97ebdd 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -295,7 +295,8 @@ static const struct sdhci_ops sdhci_iproc_bcm2711_ops = {
};
static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = {
- .quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
+ .quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.ops = &sdhci_iproc_bcm2711_ops,
};
--
2.30.2
From: Kristin Paget <[email protected]>
[ Upstream commit da94692001ea45ffa1f5e9f17ecdef7aecd90c27 ]
The 2021-model XPS 15 appears to use the same 4-speakers-on-ALC289 audio
setup as the Precision models, so requires the same quirk to enable woofer
output. Tested on my own 9510.
Signed-off-by: Kristin Paget <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index beb5fb03e388..de4cd91b9ba8 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8258,6 +8258,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1028, 0x0a2e, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC),
SND_PCI_QUIRK(0x1028, 0x0a30, "Dell", ALC236_FIXUP_DELL_AIO_HEADSET_MIC),
SND_PCI_QUIRK(0x1028, 0x0a58, "Dell", ALC255_FIXUP_DELL_HEADSET_MIC),
+ SND_PCI_QUIRK(0x1028, 0x0a61, "Dell XPS 15 9510", ALC289_FIXUP_DUAL_SPK),
SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
--
2.30.2
From: Ilya Leoshkevich <[email protected]>
[ Upstream commit 45c709f8c71b525b51988e782febe84ce933e7e0 ]
"access skb fields ok" verifier test fails on s390 with the "verifier
bug. zext_dst is set, but no reg is defined" message. The first insns
of the test prog are ...
0: 61 01 00 00 00 00 00 00 ldxw %r0,[%r1+0]
8: 35 00 00 01 00 00 00 00 jge %r0,0,1
10: 61 01 00 08 00 00 00 00 ldxw %r0,[%r1+8]
... and the 3rd one is dead (this does not look intentional to me, but
this is a separate topic).
sanitize_dead_code() converts dead insns into "ja -1", but keeps
zext_dst. When opt_subreg_zext_lo32_rnd_hi32() tries to parse such
an insn, it sees this discrepancy and bails. This problem can be seen
only with JITs whose bpf_jit_needs_zext() returns true.
Fix by clearning dead insns' zext_dst.
The commits that contributed to this problem are:
1. 5aa5bd14c5f8 ("bpf: add initial suite for selftests"), which
introduced the test with the dead code.
2. 5327ed3d44b7 ("bpf: verifier: mark verified-insn with
sub-register zext flag"), which introduced the zext_dst flag.
3. 83a2881903f3 ("bpf: Account for BPF_FETCH in
insn_has_def32()"), which introduced the sanity check.
4. 9183671af6db ("bpf: Fix leakage under speculation on
mispredicted branches"), which bisect points to.
It's best to fix this on stable branches that contain the second one,
since that's the point where the inconsistency was introduced.
Fixes: 5327ed3d44b7 ("bpf: verifier: mark verified-insn with sub-register zext flag")
Signed-off-by: Ilya Leoshkevich <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index ce1e9193365f..1410f128c404 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -10705,6 +10705,7 @@ static void sanitize_dead_code(struct bpf_verifier_env *env)
if (aux_data[i].seen)
continue;
memcpy(insn + i, &trap, sizeof(trap));
+ aux_data[i].zext_dst = false;
}
}
--
2.30.2
From: Christophe Kerello <[email protected]>
[ Upstream commit d8e193f13b07e6c0ffaa1a999386f1989f2b4c5e ]
If the card has not been power cycled, it may still be using 1.8V
signaling. This situation is detected in mmc_sd_init_card function and
should be handled in mmci stm32 variant. The host->pwr_reg variable is
also correctly protected with spin locks.
Fixes: 94b94a93e355 ("mmc: mmci_sdmmc: Implement signal voltage callbacks")
Signed-off-by: Christophe Kerello <[email protected]>
Signed-off-by: Yann Gautier <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/mmci_stm32_sdmmc.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index 51db30acf4dc..fdaa11f92fe6 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -479,8 +479,9 @@ static int sdmmc_post_sig_volt_switch(struct mmci_host *host,
u32 status;
int ret = 0;
- if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
- spin_lock_irqsave(&host->lock, flags);
+ spin_lock_irqsave(&host->lock, flags);
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180 &&
+ host->pwr_reg & MCI_STM32_VSWITCHEN) {
mmci_write_pwrreg(host, host->pwr_reg | MCI_STM32_VSWITCH);
spin_unlock_irqrestore(&host->lock, flags);
@@ -492,9 +493,11 @@ static int sdmmc_post_sig_volt_switch(struct mmci_host *host,
writel_relaxed(MCI_STM32_VSWENDC | MCI_STM32_CKSTOPC,
host->base + MMCICLEAR);
+ spin_lock_irqsave(&host->lock, flags);
mmci_write_pwrreg(host, host->pwr_reg &
~(MCI_STM32_VSWITCHEN | MCI_STM32_VSWITCH));
}
+ spin_unlock_irqrestore(&host->lock, flags);
return ret;
}
--
2.30.2
From: Shaik Sajida Bhanu <[email protected]>
[ Upstream commit 67b13f3e221ed81b46a657e2b499bf8b20162476 ]
Whenever SDHC run at clock rate 50MHZ or below, the hardware data
timeout value will be 21.47secs, which is approx. 22secs and we have
a current software timeout value as 10secs. We have to set software
timeout value more than the hardware data timeout value to avioid seeing
the below register dumps.
[ 332.953670] mmc2: Timeout waiting for hardware interrupt.
[ 332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 332.966450] mmc2: sdhci: Sys addr: 0x00000000 | Version: 0x00007202
[ 332.973256] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000001
[ 332.980054] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000027
[ 332.986864] mmc2: sdhci: Present: 0x01f801f6 | Host ctl: 0x0000001f
[ 332.993671] mmc2: sdhci: Power: 0x00000001 | Blk gap: 0x00000000
[ 333.000583] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 333.007386] mmc2: sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[ 333.014182] mmc2: sdhci: Int enab: 0x03ff100b | Sig enab: 0x03ff100b
[ 333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 333.027771] mmc2: sdhci: Caps: 0x322dc8b2 | Caps_1: 0x0000808f
[ 333.034561] mmc2: sdhci: Cmd: 0x0000183a | Max curr: 0x00000000
[ 333.041359] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 333.048157] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 333.054945] mmc2: sdhci: Host ctl2: 0x00000000
[ 333.059657] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr:
0x0000000ffffff218
[ 333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
-----------
[ 333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c | DLL cfg2: 0x0020a000
[ 333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00000000 | DDR cfg: 0x80040873
[ 333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040
[ 333.102371] mmc2: sdhci: ============================================
So, set software timeout value more than hardware timeout value.
Signed-off-by: Shaik Sajida Bhanu <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci-msm.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 3451eb325513..588b9a564117 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1834,6 +1834,23 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
sdhci_cqe_disable(mmc, recovery);
}
+static void sdhci_msm_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ u32 count, start = 15;
+
+ __sdhci_set_timeout(host, cmd);
+ count = sdhci_readb(host, SDHCI_TIMEOUT_CONTROL);
+ /*
+ * Update software timeout value if its value is less than hardware data
+ * timeout value. Qcom SoC hardware data timeout value was calculated
+ * using 4 * MCLK * 2^(count + 13). where MCLK = 1 / host->clock.
+ */
+ if (cmd && cmd->data && host->clock > 400000 &&
+ host->clock <= 50000000 &&
+ ((1 << (count + start)) > (10 * host->clock)))
+ host->data_timeout = 22LL * NSEC_PER_SEC;
+}
+
static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
.enable = sdhci_cqe_enable,
.disable = sdhci_msm_cqe_disable,
@@ -2184,6 +2201,7 @@ static const struct sdhci_ops sdhci_msm_ops = {
.irq = sdhci_msm_cqe_irq,
.dump_vendor_regs = sdhci_msm_dump_vendor_regs,
.set_power = sdhci_set_power_noreg,
+ .set_timeout = sdhci_msm_set_timeout,
};
static const struct sdhci_pltfm_data sdhci_msm_pdata = {
--
2.30.2
From: Nicolas Saenz Julienne <[email protected]>
[ Upstream commit c9107dd0b851777d7e134420baf13a5c5343bc16 ]
There is a known bug on BCM2711's SDHCI core integration where the
controller will hang when the difference between the core clock and the
bus clock is too great. Specifically this can be reproduced under the
following conditions:
- No SD card plugged in, polling thread is running, probing cards at
100 kHz.
- BCM2711's core clock configured at 500MHz or more.
So set 200 kHz as the minimum clock frequency available for that board.
For more information on the issue see this:
https://lore.kernel.org/linux-mmc/[email protected]/T/#m11f2783a09b581da6b8a15f302625b43a6ecdeca
Fixes: f84e411c85be ("mmc: sdhci-iproc: Add support for emmc2 of the BCM2711")
Signed-off-by: Nicolas Saenz Julienne <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci-iproc.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index ddeaf8e1f72f..b9eb2ec61a83 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -173,6 +173,23 @@ static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
return pltfm_host->clock;
}
+/*
+ * There is a known bug on BCM2711's SDHCI core integration where the
+ * controller will hang when the difference between the core clock and the bus
+ * clock is too great. Specifically this can be reproduced under the following
+ * conditions:
+ *
+ * - No SD card plugged in, polling thread is running, probing cards at
+ * 100 kHz.
+ * - BCM2711's core clock configured at 500MHz or more
+ *
+ * So we set 200kHz as the minimum clock frequency available for that SoC.
+ */
+static unsigned int sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host *host)
+{
+ return 200000;
+}
+
static const struct sdhci_ops sdhci_iproc_ops = {
.set_clock = sdhci_set_clock,
.get_max_clock = sdhci_iproc_get_max_clock,
@@ -271,6 +288,7 @@ static const struct sdhci_ops sdhci_iproc_bcm2711_ops = {
.set_clock = sdhci_set_clock,
.set_power = sdhci_set_power_and_bus_voltage,
.get_max_clock = sdhci_iproc_get_max_clock,
+ .get_min_clock = sdhci_iproc_bcm2711_get_min_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
--
2.30.2
From: Bjorn Andersson <[email protected]>
[ Upstream commit 9711759a87a041705148161b937ec847048d882e ]
As GDSCs are registered and found to be already enabled gdsc_init()
ensures that 1) the kernel state matches the hardware state, and 2)
votable GDSCs are properly enabled from this master as well.
But as the (optional) supply regulator is enabled deep into
gdsc_toggle_logic(), which is only executed for votable GDSCs, the
kernel's state of the regulator might not match the hardware. The
regulator might be automatically turned off if no other users are
present or the next call to gdsc_disable() would cause an unbalanced
regulator_disable().
Given that the votable case deals with an already enabled GDSC, most of
gdsc_enable() and gdsc_toggle_logic() can be skipped. Reduce it to just
clearing the SW_COLLAPSE_MASK and enabling hardware control to simply
call regulator_enable() in both cases.
The enablement of hardware control seems to be an independent property
from the GDSC being enabled, so this is moved outside that conditional
segment.
Lastly, as the propagation of ALWAYS_ON to GENPD_FLAG_ALWAYS_ON needs to
happen regardless of the initial state this is grouped together with the
other sc->pd updates at the end of the function.
Cc: [email protected]
Fixes: 37416e554961 ("clk: qcom: gdsc: Handle GDSC regulator supplies")
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[[email protected]: Rephrase commit text]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/gdsc.c | 54 +++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index 51ed640e527b..4ece326ea233 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -357,27 +357,43 @@ static int gdsc_init(struct gdsc *sc)
if (on < 0)
return on;
- /*
- * Votable GDSCs can be ON due to Vote from other masters.
- * If a Votable GDSC is ON, make sure we have a Vote.
- */
- if ((sc->flags & VOTABLE) && on)
- gdsc_enable(&sc->pd);
+ if (on) {
+ /* The regulator must be on, sync the kernel state */
+ if (sc->rsupply) {
+ ret = regulator_enable(sc->rsupply);
+ if (ret < 0)
+ return ret;
+ }
- /*
- * Make sure the retain bit is set if the GDSC is already on, otherwise
- * we end up turning off the GDSC and destroying all the register
- * contents that we thought we were saving.
- */
- if ((sc->flags & RETAIN_FF_ENABLE) && on)
- gdsc_retain_ff_on(sc);
+ /*
+ * Votable GDSCs can be ON due to Vote from other masters.
+ * If a Votable GDSC is ON, make sure we have a Vote.
+ */
+ if (sc->flags & VOTABLE) {
+ ret = regmap_update_bits(sc->regmap, sc->gdscr,
+ SW_COLLAPSE_MASK, val);
+ if (ret)
+ return ret;
+ }
+
+ /* Turn on HW trigger mode if supported */
+ if (sc->flags & HW_CTRL) {
+ ret = gdsc_hwctrl(sc, true);
+ if (ret < 0)
+ return ret;
+ }
- /* If ALWAYS_ON GDSCs are not ON, turn them ON */
- if (sc->flags & ALWAYS_ON) {
- if (!on)
- gdsc_enable(&sc->pd);
+ /*
+ * Make sure the retain bit is set if the GDSC is already on,
+ * otherwise we end up turning off the GDSC and destroying all
+ * the register contents that we thought we were saving.
+ */
+ if (sc->flags & RETAIN_FF_ENABLE)
+ gdsc_retain_ff_on(sc);
+ } else if (sc->flags & ALWAYS_ON) {
+ /* If ALWAYS_ON GDSCs are not ON, turn them ON */
+ gdsc_enable(&sc->pd);
on = true;
- sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
}
if (on || (sc->pwrsts & PWRSTS_RET))
@@ -385,6 +401,8 @@ static int gdsc_init(struct gdsc *sc)
else
gdsc_clear_mem_on(sc);
+ if (sc->flags & ALWAYS_ON)
+ sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
if (!sc->pd.power_off)
sc->pd.power_off = gdsc_disable;
if (!sc->pd.power_on)
--
2.30.2
From: NeilBrown <[email protected]>
[ Upstream commit 3f79f6f6247c83f448c8026c3ee16d4636ef8d4f ]
Cross-rename lacks a check when that would prevent exchanging a
directory and subvolume from different parent subvolume. This causes
data inconsistencies and is caught before commit by tree-checker,
turning the filesystem to read-only.
Calling the renameat2 with RENAME_EXCHANGE flags like
renameat2(AT_FDCWD, namesrc, AT_FDCWD, namedest, (1 << 1))
on two paths:
namesrc = dir1/subvol1/dir2
namedest = subvol2/subvol3
will cause key order problem with following write time tree-checker
report:
[1194842.307890] BTRFS critical (device loop1): corrupt leaf: root=5 block=27574272 slot=10 ino=258, invalid previous key objectid, have 257 expect 258
[1194842.322221] BTRFS info (device loop1): leaf 27574272 gen 8 total ptrs 11 free space 15444 owner 5
[1194842.331562] BTRFS info (device loop1): refs 2 lock_owner 0 current 26561
[1194842.338772] item 0 key (256 1 0) itemoff 16123 itemsize 160
[1194842.338793] inode generation 3 size 16 mode 40755
[1194842.338801] item 1 key (256 12 256) itemoff 16111 itemsize 12
[1194842.338809] item 2 key (256 84 2248503653) itemoff 16077 itemsize 34
[1194842.338817] dir oid 258 type 2
[1194842.338823] item 3 key (256 84 2363071922) itemoff 16043 itemsize 34
[1194842.338830] dir oid 257 type 2
[1194842.338836] item 4 key (256 96 2) itemoff 16009 itemsize 34
[1194842.338843] item 5 key (256 96 3) itemoff 15975 itemsize 34
[1194842.338852] item 6 key (257 1 0) itemoff 15815 itemsize 160
[1194842.338863] inode generation 6 size 8 mode 40755
[1194842.338869] item 7 key (257 12 256) itemoff 15801 itemsize 14
[1194842.338876] item 8 key (257 84 2505409169) itemoff 15767 itemsize 34
[1194842.338883] dir oid 256 type 2
[1194842.338888] item 9 key (257 96 2) itemoff 15733 itemsize 34
[1194842.338895] item 10 key (258 12 256) itemoff 15719 itemsize 14
[1194842.339163] BTRFS error (device loop1): block=27574272 write time tree block corruption detected
[1194842.339245] ------------[ cut here ]------------
[1194842.443422] WARNING: CPU: 6 PID: 26561 at fs/btrfs/disk-io.c:449 csum_one_extent_buffer+0xed/0x100 [btrfs]
[1194842.511863] CPU: 6 PID: 26561 Comm: kworker/u17:2 Not tainted 5.14.0-rc3-git+ #793
[1194842.511870] Hardware name: empty empty/S3993, BIOS PAQEX0-3 02/24/2008
[1194842.511876] Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
[1194842.511976] RIP: 0010:csum_one_extent_buffer+0xed/0x100 [btrfs]
[1194842.512068] RSP: 0018:ffffa2c284d77da0 EFLAGS: 00010282
[1194842.512074] RAX: 0000000000000000 RBX: 0000000000001000 RCX: ffff928867bd9978
[1194842.512078] RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff928867bd9970
[1194842.512081] RBP: ffff92876b958000 R08: 0000000000000001 R09: 00000000000c0003
[1194842.512085] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[1194842.512088] R13: ffff92875f989f98 R14: 0000000000000000 R15: 0000000000000000
[1194842.512092] FS: 0000000000000000(0000) GS:ffff928867a00000(0000) knlGS:0000000000000000
[1194842.512095] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1194842.512099] CR2: 000055f5384da1f0 CR3: 0000000102fe4000 CR4: 00000000000006e0
[1194842.512103] Call Trace:
[1194842.512128] ? run_one_async_free+0x10/0x10 [btrfs]
[1194842.631729] btree_csum_one_bio+0x1ac/0x1d0 [btrfs]
[1194842.631837] run_one_async_start+0x18/0x30 [btrfs]
[1194842.631938] btrfs_work_helper+0xd5/0x1d0 [btrfs]
[1194842.647482] process_one_work+0x262/0x5e0
[1194842.647520] worker_thread+0x4c/0x320
[1194842.655935] ? process_one_work+0x5e0/0x5e0
[1194842.655946] kthread+0x135/0x160
[1194842.655953] ? set_kthread_struct+0x40/0x40
[1194842.655965] ret_from_fork+0x1f/0x30
[1194842.672465] irq event stamp: 1729
[1194842.672469] hardirqs last enabled at (1735): [<ffffffffbd1104f5>] console_trylock_spinning+0x185/0x1a0
[1194842.672477] hardirqs last disabled at (1740): [<ffffffffbd1104cc>] console_trylock_spinning+0x15c/0x1a0
[1194842.672482] softirqs last enabled at (1666): [<ffffffffbdc002e1>] __do_softirq+0x2e1/0x50a
[1194842.672491] softirqs last disabled at (1651): [<ffffffffbd08aab7>] __irq_exit_rcu+0xa7/0xd0
The corrupted data will not be written, and filesystem can be unmounted
and mounted again (all changes since the last commit will be lost).
Add the missing check for new_ino so that all non-subvolumes must reside
under the same parent subvolume. There's an exception allowing to
exchange two subvolumes from any parents as the directory representing a
subvolume is only a logical link and does not have any other structures
related to the parent subvolume, unlike files, directories etc, that
are always in the inode namespace of the parent subvolume.
Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: [email protected] # 4.7+
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/inode.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 4f21b8fbfd4b..fc4311415fc6 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -8904,8 +8904,14 @@ static int btrfs_rename_exchange(struct inode *old_dir,
bool dest_log_pinned = false;
bool need_abort = false;
- /* we only allow rename subvolume link between subvolumes */
- if (old_ino != BTRFS_FIRST_FREE_OBJECTID && root != dest)
+ /*
+ * For non-subvolumes allow exchange only within one subvolume, in the
+ * same inode namespace. Two subvolumes (represented as directory) can
+ * be exchanged as they're a logical link and have a fixed inode number.
+ */
+ if (root != dest &&
+ (old_ino != BTRFS_FIRST_FREE_OBJECTID ||
+ new_ino != BTRFS_FIRST_FREE_OBJECTID))
return -EXDEV;
/* close the race window with snapshot create/destroy ioctl */
--
2.30.2
From: Dongliang Mu <[email protected]>
[ Upstream commit 57a1681095f912239c7fb4d66683ab0425973838 ]
The function tpci200_register called by tpci200_install and
tpci200_unregister called by tpci200_uninstall are in pair. However,
tpci200_unregister has some cleanup operations not in the
tpci200_register. So the error handling code of tpci200_pci_probe has
many different double free issues.
Fix this problem by moving those cleanup operations out of
tpci200_unregister, into tpci200_pci_remove and reverting
the previous commit 9272e5d0028d ("ipack/carriers/tpci200:
Fix a double free in tpci200_pci_probe").
Fixes: 9272e5d0028d ("ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe")
Cc: [email protected]
Reported-by: Dongliang Mu <[email protected]>
Signed-off-by: Dongliang Mu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ipack/carriers/tpci200.c | 36 ++++++++++++++++----------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/ipack/carriers/tpci200.c b/drivers/ipack/carriers/tpci200.c
index e1822e87ec3d..33a1b17a2628 100644
--- a/drivers/ipack/carriers/tpci200.c
+++ b/drivers/ipack/carriers/tpci200.c
@@ -91,16 +91,13 @@ static void tpci200_unregister(struct tpci200_board *tpci200)
free_irq(tpci200->info->pdev->irq, (void *) tpci200);
pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
- pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR);
pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
- pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR);
pci_disable_device(tpci200->info->pdev);
- pci_dev_put(tpci200->info->pdev);
}
static void tpci200_enable_irq(struct tpci200_board *tpci200,
@@ -529,7 +526,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL);
if (!tpci200->info) {
ret = -ENOMEM;
- goto out_err_info;
+ goto err_tpci200;
}
pci_dev_get(pdev);
@@ -540,7 +537,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
if (ret) {
dev_err(&pdev->dev, "Failed to allocate PCI Configuration Memory");
ret = -EBUSY;
- goto out_err_pci_request;
+ goto err_tpci200_info;
}
tpci200->info->cfg_regs = ioremap(
pci_resource_start(pdev, TPCI200_CFG_MEM_BAR),
@@ -548,7 +545,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
if (!tpci200->info->cfg_regs) {
dev_err(&pdev->dev, "Failed to map PCI Configuration Memory");
ret = -EFAULT;
- goto out_err_ioremap;
+ goto err_request_region;
}
/* Disable byte swapping for 16 bit IP module access. This will ensure
@@ -571,7 +568,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
if (ret) {
dev_err(&pdev->dev, "error during tpci200 install\n");
ret = -ENODEV;
- goto out_err_install;
+ goto err_cfg_regs;
}
/* Register the carrier in the industry pack bus driver */
@@ -583,7 +580,7 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
dev_err(&pdev->dev,
"error registering the carrier on ipack driver\n");
ret = -EFAULT;
- goto out_err_bus_register;
+ goto err_tpci200_install;
}
/* save the bus number given by ipack to logging purpose */
@@ -594,19 +591,16 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
tpci200_create_device(tpci200, i);
return 0;
-out_err_bus_register:
+err_tpci200_install:
tpci200_uninstall(tpci200);
- /* tpci200->info->cfg_regs is unmapped in tpci200_uninstall */
- tpci200->info->cfg_regs = NULL;
-out_err_install:
- if (tpci200->info->cfg_regs)
- iounmap(tpci200->info->cfg_regs);
-out_err_ioremap:
+err_cfg_regs:
+ pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
+err_request_region:
pci_release_region(pdev, TPCI200_CFG_MEM_BAR);
-out_err_pci_request:
- pci_dev_put(pdev);
+err_tpci200_info:
kfree(tpci200->info);
-out_err_info:
+ pci_dev_put(pdev);
+err_tpci200:
kfree(tpci200);
return ret;
}
@@ -616,6 +610,12 @@ static void __tpci200_pci_remove(struct tpci200_board *tpci200)
ipack_bus_unregister(tpci200->info->ipack_bus);
tpci200_uninstall(tpci200);
+ pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs);
+
+ pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR);
+
+ pci_dev_put(tpci200->info->pdev);
+
kfree(tpci200->info);
kfree(tpci200);
}
--
2.30.2
From: Dongliang Mu <[email protected]>
[ Upstream commit 50f05bd114a46a74726e432bf81079d3f13a55b7 ]
The error handling code in tpci200_register does not free interface_regs
allocated by ioremap and the current version of error handling code is
problematic.
Fix this by refactoring the error handling code and free interface_regs
when necessary.
Fixes: 43986798fd50 ("ipack: add error handling for ioremap_nocache")
Cc: [email protected]
Reported-by: Dongliang Mu <[email protected]>
Signed-off-by: Dongliang Mu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ipack/carriers/tpci200.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/ipack/carriers/tpci200.c b/drivers/ipack/carriers/tpci200.c
index 33a1b17a2628..c1098f40e03f 100644
--- a/drivers/ipack/carriers/tpci200.c
+++ b/drivers/ipack/carriers/tpci200.c
@@ -256,7 +256,7 @@ static int tpci200_register(struct tpci200_board *tpci200)
"(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 2 !",
tpci200->info->pdev->bus->number,
tpci200->info->pdev->devfn);
- goto out_disable_pci;
+ goto err_disable_device;
}
/* Request IO ID INT space (Bar 3) */
@@ -268,7 +268,7 @@ static int tpci200_register(struct tpci200_board *tpci200)
"(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 3 !",
tpci200->info->pdev->bus->number,
tpci200->info->pdev->devfn);
- goto out_release_ip_space;
+ goto err_ip_interface_bar;
}
/* Request MEM8 space (Bar 5) */
@@ -279,7 +279,7 @@ static int tpci200_register(struct tpci200_board *tpci200)
"(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 5!",
tpci200->info->pdev->bus->number,
tpci200->info->pdev->devfn);
- goto out_release_ioid_int_space;
+ goto err_io_id_int_spaces_bar;
}
/* Request MEM16 space (Bar 4) */
@@ -290,7 +290,7 @@ static int tpci200_register(struct tpci200_board *tpci200)
"(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!",
tpci200->info->pdev->bus->number,
tpci200->info->pdev->devfn);
- goto out_release_mem8_space;
+ goto err_mem8_space_bar;
}
/* Map internal tpci200 driver user space */
@@ -304,7 +304,7 @@ static int tpci200_register(struct tpci200_board *tpci200)
tpci200->info->pdev->bus->number,
tpci200->info->pdev->devfn);
res = -ENOMEM;
- goto out_release_mem8_space;
+ goto err_mem16_space_bar;
}
/* Initialize lock that protects interface_regs */
@@ -343,18 +343,22 @@ static int tpci200_register(struct tpci200_board *tpci200)
"(bn 0x%X, sn 0x%X) unable to register IRQ !",
tpci200->info->pdev->bus->number,
tpci200->info->pdev->devfn);
- goto out_release_ioid_int_space;
+ goto err_interface_regs;
}
return 0;
-out_release_mem8_space:
+err_interface_regs:
+ pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
+err_mem16_space_bar:
+ pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR);
+err_mem8_space_bar:
pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
-out_release_ioid_int_space:
+err_io_id_int_spaces_bar:
pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
-out_release_ip_space:
+err_ip_interface_bar:
pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
-out_disable_pci:
+err_disable_device:
pci_disable_device(tpci200->info->pdev);
return res;
}
--
2.30.2
From: Takashi Iwai <[email protected]>
[ Upstream commit 4bf61ad5f0204b67ba570da6e5c052c2095e29df ]
ASUS B23E requires the same workaround like other machines with
VT1802, otherwise it looses the codec power on a few nodes and the
sound kept silence.
Fixes: a0645daf1610 ("ALSA: HDA: Early Forbid of runtime PM")
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_via.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index a5c1a2c4eae4..773a136161f1 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1041,6 +1041,7 @@ static const struct hda_fixup via_fixups[] = {
};
static const struct snd_pci_quirk vt2002p_fixups[] = {
+ SND_PCI_QUIRK(0x1043, 0x13f7, "Asus B23E", VIA_FIXUP_POWER_SAVE),
SND_PCI_QUIRK(0x1043, 0x1487, "Asus G75", VIA_FIXUP_ASUS_G75),
SND_PCI_QUIRK(0x1043, 0x8532, "Asus X202E", VIA_FIXUP_INTMIC_BOOST),
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo", VIA_FIXUP_POWER_SAVE),
--
2.30.2
From: Marcin Bachry <[email protected]>
[ Upstream commit e0bff43220925b7e527f9d3bc9f5c624177c959e ]
The Renoir XHCI controller apparently doesn't resume reliably with the
standard D3hot-to-D0 delay. Increase it to 20ms.
[Alex: I talked to the AMD USB hardware team and the AMD Windows team and
they are not aware of any HW errata or specific issues. The HW works fine
in Windows. I was told Windows uses a rather generous default delay of
100ms for PCI state transitions.]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marcin Bachry <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Cc: Mario Limonciello <[email protected]>
Cc: Prike Liang <[email protected]>
Cc: Shyam Sundar S K <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/quirks.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bb1122e257dd..cd2401d4764f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1905,6 +1905,7 @@ static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1639, quirk_ryzen_xhci_d3hot);
#ifdef CONFIG_X86_IO_APIC
static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
--
2.30.2
Signed-off-by: Sasha Levin <[email protected]>
---
Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index 7f25cfee84ec..f3dfed58669a 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 10
-SUBLEVEL = 60
-EXTRAVERSION =
+SUBLEVEL = 61
+EXTRAVERSION = -rc1
NAME = Dare mighty things
# *DOCUMENTATION*
--
2.30.2
From: Niklas Schnelle <[email protected]>
[ Upstream commit 2a671f77ee49f3e78997b77fdee139467ff6a598 ]
The struct pci_dev uses reference counting but zPCI assumed erroneously
that the last reference would always be the local reference after
calling pci_stop_and_remove_bus_device(). This is usually the case but
not how reference counting works and thus inherently fragile.
In fact one case where this causes a NULL pointer dereference when on an
SRIOV device the function 0 was hot unplugged before another function of
the same multi-function device. In this case the second function's
pdev->sriov->dev reference keeps the struct pci_dev of function 0 alive
even after the unplug. This bug was previously hidden by the fact that
we were leaking the struct pci_dev which in turn means that it always
outlived the struct zpci_dev. This was fixed in commit 0b13525c20fe
("s390/pci: fix leak of PCI device structure") exposing the broken
behavior.
Fix this by accounting for the long living reference a struct pci_dev
has to its underlying struct zpci_dev via the zbus->function[] array and
only release that in pcibios_release_device() ensuring that the struct
pci_dev is not left with a dangling reference. This is a minimal fix in
the future it would probably better to use fine grained reference
counting for struct zpci_dev.
Fixes: 05bc1be6db4b2 ("s390/pci: create zPCI bus")
Cc: [email protected]
Reviewed-by: Matthew Rosato <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/pci/pci.c | 6 ++++++
arch/s390/pci/pci_bus.h | 5 +++++
2 files changed, 11 insertions(+)
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 1ae7a76ae97b..ca1a105e3b5d 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -558,9 +558,12 @@ static void zpci_cleanup_bus_resources(struct zpci_dev *zdev)
int pcibios_add_device(struct pci_dev *pdev)
{
+ struct zpci_dev *zdev = to_zpci(pdev);
struct resource *res;
int i;
+ /* The pdev has a reference to the zdev via its bus */
+ zpci_zdev_get(zdev);
if (pdev->is_physfn)
pdev->no_vf_scan = 1;
@@ -580,7 +583,10 @@ int pcibios_add_device(struct pci_dev *pdev)
void pcibios_release_device(struct pci_dev *pdev)
{
+ struct zpci_dev *zdev = to_zpci(pdev);
+
zpci_unmap_resources(pdev);
+ zpci_zdev_put(zdev);
}
int pcibios_enable_device(struct pci_dev *pdev, int mask)
diff --git a/arch/s390/pci/pci_bus.h b/arch/s390/pci/pci_bus.h
index f8dfac0b5b71..55c9488e504c 100644
--- a/arch/s390/pci/pci_bus.h
+++ b/arch/s390/pci/pci_bus.h
@@ -16,6 +16,11 @@ static inline void zpci_zdev_put(struct zpci_dev *zdev)
kref_put(&zdev->kref, zpci_release_device);
}
+static inline void zpci_zdev_get(struct zpci_dev *zdev)
+{
+ kref_get(&zdev->kref);
+}
+
int zpci_alloc_domain(int domain);
void zpci_free_domain(int domain);
int zpci_setup_bus_resources(struct zpci_dev *zdev,
--
2.30.2
From: Jens Axboe <[email protected]>
[ upstream commit 21f965221e7c42609521342403e8fb91b8b3e76e ]
If an SQPOLL based ring is newly created and an application issues an
io_uring_enter(2) system call on it, then we can return a spurious
-EOWNERDEAD error. This happens because there's nothing to submit, and
if the caller doesn't specify any other action, the initial error
assignment of -EOWNERDEAD never gets overwritten. This causes us to
return it directly, even if it isn't valid.
Move the error assignment into the actual failure case instead.
Cc: [email protected]
Fixes: d9d05217cb69 ("io_uring: stop SQPOLL submit on creator's death")
Reported-by: Sherlock Holo [email protected]
Link: https://github.com/axboe/liburing/issues/413
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io_uring.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 762eae2440b5..108b0ed31c11 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -9078,9 +9078,10 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,
if (ctx->flags & IORING_SETUP_SQPOLL) {
io_cqring_overflow_flush(ctx, false, NULL, NULL);
- ret = -EOWNERDEAD;
- if (unlikely(ctx->sqo_dead))
+ if (unlikely(ctx->sqo_dead)) {
+ ret = -EOWNERDEAD;
goto out;
+ }
if (flags & IORING_ENTER_SQ_WAKEUP)
wake_up(&ctx->sq_data->wait);
if (flags & IORING_ENTER_SQ_WAIT) {
--
2.30.2
From: Takashi Iwai <[email protected]>
[ Upstream commit 65ca89c2b12cca0d473f3dd54267568ad3af55cc ]
The commit 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM
buffer address") changed the reference of PCM buffer address to
substream->runtime->dma_addr as the buffer address may change
dynamically. However, I forgot that the dma_addr field is still not
set up for the CONTINUOUS buffer type (that this driver uses) yet in
5.14 and earlier kernels, and it resulted in garbage I/O. The problem
will be fixed in 5.15, but we need to address it quickly for now.
The fix is to deduce the address again from the DMA pointer with
virt_to_phys(), but from the right one, substream->runtime->dma_area.
Fixes: 2e6b836312a4 ("ASoC: intel: atom: Fix reference to PCM buffer address")
Reported-and-tested-by: Hans de Goede <[email protected]>
Cc: <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
index 2784611196f0..255b4d528a66 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -127,7 +127,7 @@ static void sst_fill_alloc_params(struct snd_pcm_substream *substream,
snd_pcm_uframes_t period_size;
ssize_t periodbytes;
ssize_t buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
- u32 buffer_addr = substream->runtime->dma_addr;
+ u32 buffer_addr = virt_to_phys(substream->runtime->dma_area);
channels = substream->runtime->channels;
period_size = substream->runtime->period_size;
--
2.30.2
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 8903376dc69949199301b290cc22dc64ae5d8a6d ]
The mic has lots of noises if mic boost is enabled. So disable mic boost
to get crystal clear audio capture.
Signed-off-by: Kai-Heng Feng <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index de4cd91b9ba8..6219d0311c9a 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6590,6 +6590,7 @@ enum {
ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP,
ALC623_FIXUP_LENOVO_THINKSTATION_P340,
ALC255_FIXUP_ACER_HEADPHONE_AND_MIC,
+ ALC236_FIXUP_HP_LIMIT_INT_MIC_BOOST,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -8168,6 +8169,12 @@ static const struct hda_fixup alc269_fixups[] = {
.chained = true,
.chain_id = ALC255_FIXUP_XIAOMI_HEADSET_MIC
},
+ [ALC236_FIXUP_HP_LIMIT_INT_MIC_BOOST] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc269_fixup_limit_int_mic_boost,
+ .chained = true,
+ .chain_id = ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8364,8 +8371,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x8847, "HP EliteBook x360 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x884b, "HP EliteBook 840 Aero G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x884c, "HP EliteBook 840 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
- SND_PCI_QUIRK(0x103c, 0x8862, "HP ProBook 445 G8 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
- SND_PCI_QUIRK(0x103c, 0x8863, "HP ProBook 445 G8 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
+ SND_PCI_QUIRK(0x103c, 0x8862, "HP ProBook 445 G8 Notebook PC", ALC236_FIXUP_HP_LIMIT_INT_MIC_BOOST),
+ SND_PCI_QUIRK(0x103c, 0x8863, "HP ProBook 445 G8 Notebook PC", ALC236_FIXUP_HP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x103c, 0x886d, "HP ZBook Fury 17.3 Inch G8 Mobile Workstation PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8870, "HP ZBook Fury 15.6 Inch G8 Mobile Workstation PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
SND_PCI_QUIRK(0x103c, 0x8873, "HP ZBook Studio 15.6 Inch G8 Mobile Workstation PC", ALC285_FIXUP_HP_GPIO_AMP_INIT),
--
2.30.2
From: Jeff Layton <[email protected]>
[ Upstream commit fdd92b64d15bc4aec973caa25899afd782402e68 ]
We've had CONFIG_MANDATORY_FILE_LOCKING since 2015 and a lot of distros
have disabled it. Warn the stragglers that still use "-o mand" that
we'll be dropping support for that mount option.
Cc: [email protected]
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/namespace.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/namespace.c b/fs/namespace.c
index 175312428cdf..046b084136c5 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1697,8 +1697,12 @@ static inline bool may_mount(void)
}
#ifdef CONFIG_MANDATORY_FILE_LOCKING
-static inline bool may_mandlock(void)
+static bool may_mandlock(void)
{
+ pr_warn_once("======================================================\n"
+ "WARNING: the mand mount option is being deprecated and\n"
+ " will be removed in v5.15!\n"
+ "======================================================\n");
return capable(CAP_SYS_ADMIN);
}
#else
--
2.30.2
From: Johannes Weiner <[email protected]>
[ Upstream commit f56ce412a59d7d938b81de8878faef128812482c ]
We've noticed occasional OOM killing when memory.low settings are in
effect for cgroups. This is unexpected and undesirable as memory.low is
supposed to express non-OOMing memory priorities between cgroups.
The reason for this is proportional memory.low reclaim. When cgroups
are below their memory.low threshold, reclaim passes them over in the
first round, and then retries if it couldn't find pages anywhere else.
But when cgroups are slightly above their memory.low setting, page scan
force is scaled down and diminished in proportion to the overage, to the
point where it can cause reclaim to fail as well - only in that case we
currently don't retry, and instead trigger OOM.
To fix this, hook proportional reclaim into the same retry logic we have
in place for when cgroups are skipped entirely. This way if reclaim
fails and some cgroups were scanned with diminished pressure, we'll try
another full-force cycle before giving up and OOMing.
[[email protected]: coding-style fixes]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9783aa9917f8 ("mm, memcg: proportional memory.{low,min} reclaim")
Signed-off-by: Johannes Weiner <[email protected]>
Reported-by: Leon Yang <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Acked-by: Chris Down <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: <[email protected]> [5.4+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/memcontrol.h | 29 +++++++++++++++--------------
mm/vmscan.c | 27 +++++++++++++++++++--------
2 files changed, 34 insertions(+), 22 deletions(-)
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index c691b1ac95f8..4b975111b536 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -360,12 +360,15 @@ static inline bool mem_cgroup_disabled(void)
return !cgroup_subsys_enabled(memory_cgrp_subsys);
}
-static inline unsigned long mem_cgroup_protection(struct mem_cgroup *root,
- struct mem_cgroup *memcg,
- bool in_low_reclaim)
+static inline void mem_cgroup_protection(struct mem_cgroup *root,
+ struct mem_cgroup *memcg,
+ unsigned long *min,
+ unsigned long *low)
{
+ *min = *low = 0;
+
if (mem_cgroup_disabled())
- return 0;
+ return;
/*
* There is no reclaim protection applied to a targeted reclaim.
@@ -401,13 +404,10 @@ static inline unsigned long mem_cgroup_protection(struct mem_cgroup *root,
*
*/
if (root == memcg)
- return 0;
-
- if (in_low_reclaim)
- return READ_ONCE(memcg->memory.emin);
+ return;
- return max(READ_ONCE(memcg->memory.emin),
- READ_ONCE(memcg->memory.elow));
+ *min = READ_ONCE(memcg->memory.emin);
+ *low = READ_ONCE(memcg->memory.elow);
}
void mem_cgroup_calculate_protection(struct mem_cgroup *root,
@@ -966,11 +966,12 @@ static inline void memcg_memory_event_mm(struct mm_struct *mm,
{
}
-static inline unsigned long mem_cgroup_protection(struct mem_cgroup *root,
- struct mem_cgroup *memcg,
- bool in_low_reclaim)
+static inline void mem_cgroup_protection(struct mem_cgroup *root,
+ struct mem_cgroup *memcg,
+ unsigned long *min,
+ unsigned long *low)
{
- return 0;
+ *min = *low = 0;
}
static inline void mem_cgroup_calculate_protection(struct mem_cgroup *root,
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 67d38334052e..7fb9af001ed5 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -102,9 +102,12 @@ struct scan_control {
unsigned int may_swap:1;
/*
- * Cgroups are not reclaimed below their configured memory.low,
- * unless we threaten to OOM. If any cgroups are skipped due to
- * memory.low and nothing was reclaimed, go back for memory.low.
+ * Cgroup memory below memory.low is protected as long as we
+ * don't threaten to OOM. If any cgroup is reclaimed at
+ * reduced force or passed over entirely due to its memory.low
+ * setting (memcg_low_skipped), and nothing is reclaimed as a
+ * result, then go back for one more cycle that reclaims the protected
+ * memory (memcg_low_reclaim) to avert OOM.
*/
unsigned int memcg_low_reclaim:1;
unsigned int memcg_low_skipped:1;
@@ -2323,15 +2326,14 @@ out:
for_each_evictable_lru(lru) {
int file = is_file_lru(lru);
unsigned long lruvec_size;
+ unsigned long low, min;
unsigned long scan;
- unsigned long protection;
lruvec_size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx);
- protection = mem_cgroup_protection(sc->target_mem_cgroup,
- memcg,
- sc->memcg_low_reclaim);
+ mem_cgroup_protection(sc->target_mem_cgroup, memcg,
+ &min, &low);
- if (protection) {
+ if (min || low) {
/*
* Scale a cgroup's reclaim pressure by proportioning
* its current usage to its memory.low or memory.min
@@ -2362,6 +2364,15 @@ out:
* hard protection.
*/
unsigned long cgroup_size = mem_cgroup_size(memcg);
+ unsigned long protection;
+
+ /* memory.low scaling, make sure we retry before OOM */
+ if (!sc->memcg_low_reclaim && low > min) {
+ protection = low;
+ sc->memcg_low_skipped = 1;
+ } else {
+ protection = min;
+ }
/* Avoid TOCTOU with earlier protection check */
cgroup_size = max(cgroup_size, protection);
--
2.30.2
From: Jens Axboe <[email protected]>
[ upstream commit a30f895ad3239f45012e860d4f94c1a388b36d14 ]
We currently check for ret != 0 to indicate error, but '1' is a valid
return and just indicates that the allocation succeeded with a wrap.
Correct the check to be for < 0, like it was before the xarray
conversion.
Cc: [email protected]
Fixes: 61cf93700fe6 ("io_uring: Convert personality_idr to XArray")
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io_uring.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index ed641dca7957..762eae2440b5 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -9601,11 +9601,12 @@ static int io_register_personality(struct io_ring_ctx *ctx)
ret = xa_alloc_cyclic(&ctx->personalities, &id, (void *)iod,
XA_LIMIT(0, USHRT_MAX), &ctx->pers_next, GFP_KERNEL);
- if (!ret)
- return id;
- put_cred(iod->creds);
- kfree(iod);
- return ret;
+ if (ret < 0) {
+ put_cred(iod->creds);
+ kfree(iod);
+ return ret;
+ }
+ return id;
}
static int io_register_restrictions(struct io_ring_ctx *ctx, void __user *arg,
--
2.30.2
Hi1
> When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't
> ignore it and continue registering the rest of the mdiobus children. This
> would permanently prevent the deferring child mdiobus from working instead
> of reattempting it in the future. So, if a child mdiobus needs to be
> reattempted in the future, defer the entire mdio-mux initialization.
>
> This fixes the issue where PHYs sitting under the mdio-mux aren't
> initialized correctly if the PHY's interrupt controller is not yet ready
> when the mdio-mux is being probed. Additional context in the link
> below.
I don't believe this is quite right. AFAICT it leaks memory in the
EPROBE_DEFER case. Could someone double-check? Suggested fix is below.
> +++ b/drivers/net/mdio/mdio-mux.c
> @@ -175,11 +175,15 @@ int mdio_mux_init(struct device *dev,
> cb->mii_bus->write = mdio_mux_write;
> r = of_mdiobus_register(cb->mii_bus, child_bus_node);
> if (r) {
> + mdiobus_free(cb->mii_bus);
> + if (r == -EPROBE_DEFER) {
> + ret_val = r;
> + goto err_loop;
> + }
> + devm_kfree(dev, cb);
> dev_err(dev,
> "Error: Failed to register MDIO bus for child %pOF\n",
> child_bus_node);
> - mdiobus_free(cb->mii_bus);
> - devm_kfree(dev, cb);
> } else {
> cb->next = pb->children;
> pb->children = cb;
Signed-off-by: Pavel Machek (CIP) <[email protected]>
diff --git a/drivers/net/mdio/mdio-mux.c b/drivers/net/mdio/mdio-mux.c
index ccb3ee704eb1..6d0e505343c5 100644
--- a/drivers/net/mdio/mdio-mux.c
+++ b/drivers/net/mdio/mdio-mux.c
@@ -163,6 +163,7 @@ int mdio_mux_init(struct device *dev,
cb->mii_bus = mdiobus_alloc();
if (!cb->mii_bus) {
ret_val = -ENOMEM;
+ devm_kfree(dev, cb);
goto err_loop;
}
cb->mii_bus->priv = cb;
@@ -176,11 +177,11 @@ int mdio_mux_init(struct device *dev,
r = of_mdiobus_register(cb->mii_bus, child_bus_node);
if (r) {
mdiobus_free(cb->mii_bus);
+ devm_kfree(dev, cb);
if (r == -EPROBE_DEFER) {
ret_val = r;
goto err_loop;
}
- devm_kfree(dev, cb);
dev_err(dev,
"Error: Failed to register MDIO bus for child %pOF\n",
child_bus_node);
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Tue, Aug 24, 2021 at 12:00 PM Pavel Machek <[email protected]> wrote:
>
> Hi1
>
> > When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't
> > ignore it and continue registering the rest of the mdiobus children. This
> > would permanently prevent the deferring child mdiobus from working instead
> > of reattempting it in the future. So, if a child mdiobus needs to be
> > reattempted in the future, defer the entire mdio-mux initialization.
> >
> > This fixes the issue where PHYs sitting under the mdio-mux aren't
> > initialized correctly if the PHY's interrupt controller is not yet ready
> > when the mdio-mux is being probed. Additional context in the link
> > below.
>
> I don't believe this is quite right. AFAICT it leaks memory in the
> EPROBE_DEFER case. Could someone double-check? Suggested fix is below.
devm_ APIs would take care of releasing the resource (memory)
automatically because the probe didn't succeed. So I'm not sure
there's a leak. Does that make sense?
-Saravana
>
> > +++ b/drivers/net/mdio/mdio-mux.c
> > @@ -175,11 +175,15 @@ int mdio_mux_init(struct device *dev,
> > cb->mii_bus->write = mdio_mux_write;
> > r = of_mdiobus_register(cb->mii_bus, child_bus_node);
> > if (r) {
> > + mdiobus_free(cb->mii_bus);
> > + if (r == -EPROBE_DEFER) {
> > + ret_val = r;
> > + goto err_loop;
> > + }
> > + devm_kfree(dev, cb);
> > dev_err(dev,
> > "Error: Failed to register MDIO bus for child %pOF\n",
> > child_bus_node);
> > - mdiobus_free(cb->mii_bus);
> > - devm_kfree(dev, cb);
> > } else {
> > cb->next = pb->children;
> > pb->children = cb;
>
>
> Signed-off-by: Pavel Machek (CIP) <[email protected]>
>
> diff --git a/drivers/net/mdio/mdio-mux.c b/drivers/net/mdio/mdio-mux.c
> index ccb3ee704eb1..6d0e505343c5 100644
> --- a/drivers/net/mdio/mdio-mux.c
> +++ b/drivers/net/mdio/mdio-mux.c
> @@ -163,6 +163,7 @@ int mdio_mux_init(struct device *dev,
> cb->mii_bus = mdiobus_alloc();
> if (!cb->mii_bus) {
> ret_val = -ENOMEM;
> + devm_kfree(dev, cb);
> goto err_loop;
> }
> cb->mii_bus->priv = cb;
> @@ -176,11 +177,11 @@ int mdio_mux_init(struct device *dev,
> r = of_mdiobus_register(cb->mii_bus, child_bus_node);
> if (r) {
> mdiobus_free(cb->mii_bus);
> + devm_kfree(dev, cb);
> if (r == -EPROBE_DEFER) {
> ret_val = r;
> goto err_loop;
> }
> - devm_kfree(dev, cb);
> dev_err(dev,
> "Error: Failed to register MDIO bus for child %pOF\n",
> child_bus_node);
>
>
> --
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi!
> > > When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't
> > > ignore it and continue registering the rest of the mdiobus children. This
> > > would permanently prevent the deferring child mdiobus from working instead
> > > of reattempting it in the future. So, if a child mdiobus needs to be
> > > reattempted in the future, defer the entire mdio-mux initialization.
> > >
> > > This fixes the issue where PHYs sitting under the mdio-mux aren't
> > > initialized correctly if the PHY's interrupt controller is not yet ready
> > > when the mdio-mux is being probed. Additional context in the link
> > > below.
> >
> > I don't believe this is quite right. AFAICT it leaks memory in the
> > EPROBE_DEFER case. Could someone double-check? Suggested fix is below.
>
> devm_ APIs would take care of releasing the resource (memory)
> automatically because the probe didn't succeed. So I'm not sure
> there's a leak. Does that make sense?
Yes, it does, I believe you are right.
This part of code confused me: We are going to return error there, yet
we do explicit tree, which should not be neccessary according to this
logic.
dev_err(dev, "Error: No acceptable child buses found\n");
devm_kfree(dev, pb);
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi!
> This is the start of the stable review cycle for the 5.10.61 release.
> There are 98 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi!
> [ Upstream commit 7dd2dd4ff9f3abda601f22b9d01441a0869d20d7 ]
>
> When user calls dmaengine_terminate_sync, the driver will clean up any
> remaining descriptors for all the pending or active transfers that had
> previously been submitted. However, this might happen whilst the tasklet is
> invoking the DMA callback for the last finished transfer, so by the time it
> returns and takes over the channel's spinlock, the list of completed
> descriptors it was traversing is no longer valid. This leads to a
> read-after-free situation.
>
> Fix it by signalling whether a user-triggered termination has happened by
> means of a boolean variable.
I see the variable is cleared and tested under spinlock, but it is set
without any locking. Do we need to take the spinlock, too?
Best regards,
Pavel
> @@ -1049,6 +1051,13 @@ static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
> /* Run any dependencies, then free the descriptor */
> dma_run_dependencies(&desc->async_tx);
> xilinx_dma_free_tx_descriptor(chan, desc);
> +
> + /*
> + * While we ran a callback the user called a terminate function,
> + * which takes care of cleaning up any remaining descriptors
> + */
> + if (chan->terminating)
> + break;
> }
>
> spin_unlock_irqrestore(&chan->lock, flags);
> @@ -1965,6 +1974,8 @@ static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
> if (desc->cyclic)
> chan->cyclic = true;
>
> + chan->terminating = false;
> +
> spin_unlock_irqrestore(&chan->lock, flags);
>
> return cookie;
> @@ -2436,6 +2447,7 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)
>
> xilinx_dma_chan_reset(chan);
> /* Remove and free all of the descriptors in the lists */
> + chan->terminating = true;
> xilinx_dma_free_descriptors(chan);
> chan->idle = true;
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi Sasha,
On Tue, Aug 24, 2021 at 12:57:30PM -0400, Sasha Levin wrote:
>
> This is the start of the stable review cycle for the 5.10.61 release.
> There are 98 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu 26 Aug 2021 04:58:25 PM UTC.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.1.1 20210816): 63 configs -> no new failure
arm (gcc version 11.1.1 20210816): 105 configs -> no new failure
arm64 (gcc version 11.1.1 20210816): 3 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
[1]. https://openqa.qa.codethink.co.uk/tests/56
[2]. https://openqa.qa.codethink.co.uk/tests/57
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
Hello!
On 8/24/21 11:57 AM, Sasha Levin wrote:
> This is the start of the stable review cycle for the 5.10.61 release.
> There are 98 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu 26 Aug 2021 04:58:25 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.60
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> Thanks,
> Sasha
Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.10.61-rc1
* git: ['https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git', 'https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc']
* git branch: linux-5.10.y
* git commit: bd3eb40a9de703ab9ab65f9c583e40d185d6aaad
* git describe: v5.10.60-98-gbd3eb40a9de7
* test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.60-98-gbd3eb40a9de7
## No regressions (compared to v5.10.60)
## No fixes (compared to v5.10.60)
## Test result summary
total: 78086, pass: 66126, fail: 526, skip: 10629, xfail: 805
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 226 total, 226 passed, 0 failed
* arm64: 32 total, 32 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 31 total, 31 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 48 total, 48 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 33 total, 33 passed, 0 failed
## Test suites summary
* fwts
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
Greetings!
Daniel Díaz
[email protected]
--
Linaro LKFT
https://lkft.linaro.org
On Tue, Aug 24, 2021 at 12:57:30PM -0400, Sasha Levin wrote:
>
> This is the start of the stable review cycle for the 5.10.61 release.
> There are 98 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu 26 Aug 2021 04:58:25 PM UTC.
> Anything received after that time might be too late.
>
Build results:
total: 159 pass: 159 fail: 0
Qemu test results:
total: 471 pass: 471 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On 8/24/21 10:57 AM, Sasha Levin wrote:
>
> This is the start of the stable review cycle for the 5.10.61 release.
> There are 98 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu 26 Aug 2021 04:58:25 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.60
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> Thanks,
> Sasha
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On 2021/8/25 0:57, Sasha Levin wrote:
>
> This is the start of the stable review cycle for the 5.10.61 release.
> There are 98 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu 26 Aug 2021 04:58:25 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.60
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> Thanks,
> Sasha
>
Tested on arm64 and x86 for 5.10.61-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.61-rc1
Commit: bd3eb40a9de703ab9ab65f9c583e40d185d6aaad
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8907
passed: 8907
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8907
passed: 8907
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
On Wed, Aug 25, 2021 at 09:35:27AM +0200, Pavel Machek wrote:
>Hi!
>
>> This is the start of the stable review cycle for the 5.10.61 release.
>> There are 98 patches in this series, all will be posted as a response
>> to this one. If anyone has any issues with these being applied, please
>> let me know.
>
>CIP testing did not find any problems here:
>
>https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
>
>Tested-by: Pavel Machek (CIP) <[email protected]>
Thanks for testing, Pavel!
--
Thanks,
Sasha
On Wed, Aug 25, 2021 at 02:12:48PM +0100, Sudip Mukherjee wrote:
>Hi Sasha,
>
>On Tue, Aug 24, 2021 at 12:57:30PM -0400, Sasha Levin wrote:
>>
>> This is the start of the stable review cycle for the 5.10.61 release.
>> There are 98 patches in this series, all will be posted as a response
>> to this one. If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Thu 26 Aug 2021 04:58:25 PM UTC.
>> Anything received after that time might be too late.
>
>Build test:
>mips (gcc version 11.1.1 20210816): 63 configs -> no new failure
>arm (gcc version 11.1.1 20210816): 105 configs -> no new failure
>arm64 (gcc version 11.1.1 20210816): 3 configs -> no failure
>x86_64 (gcc version 10.2.1 20210110): 4 configs -> no failure
>
>Boot test:
>x86_64: Booted on my test laptop. No regression.
>x86_64: Booted on qemu. No regression. [1]
>arm64: Booted on rpi4b (4GB model). No regression. [2]
>
>[1]. https://openqa.qa.codethink.co.uk/tests/56
>[2]. https://openqa.qa.codethink.co.uk/tests/57
>
>
>Tested-by: Sudip Mukherjee <[email protected]>
Thanks for testing, Sudip!
--
Thanks,
Sasha
On Thu, Aug 26, 2021 at 09:00:20AM +0800, Samuel Zou wrote:
>
>
>On 2021/8/25 0:57, Sasha Levin wrote:
>>
>>This is the start of the stable review cycle for the 5.10.61 release.
>>There are 98 patches in this series, all will be posted as a response
>>to this one. If anyone has any issues with these being applied, please
>>let me know.
>>
>>Responses should be made by Thu 26 Aug 2021 04:58:25 PM UTC.
>>Anything received after that time might be too late.
>>
>>The whole patch series can be found in one patch at:
>> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/patch/?id=linux-5.10.y&id2=v5.10.60
>>or in the git tree and branch at:
>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
>>and the diffstat can be found below.
>>
>>Thanks,
>>Sasha
>>
>
>Tested on arm64 and x86 for 5.10.61-rc1,
>
>Kernel repo:
>https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>Branch: linux-5.10.y
>Version: 5.10.61-rc1
>Commit: bd3eb40a9de703ab9ab65f9c583e40d185d6aaad
>Compiler: gcc version 7.3.0 (GCC)
>
>arm64:
>--------------------------------------------------------------------
>Testcase Result Summary:
>total: 8907
>passed: 8907
>failed: 0
>timeout: 0
>--------------------------------------------------------------------
>
>x86:
>--------------------------------------------------------------------
>Testcase Result Summary:
>total: 8907
>passed: 8907
>failed: 0
>timeout: 0
>--------------------------------------------------------------------
>
>Tested-by: Hulk Robot <[email protected]>
Thanks for testing, Samuel!
--
Thanks,
Sasha