2019-07-28 14:13:38

by Daniel Baluta

Subject: [PATCH v3] arm64: dts: imx8mq: Init rates and parents configs for clocks

From: Abel Vesa <[email protected]>

Add the initial configuration for clocks that need default parent and rate
setting. This is based on the vendor tree clock provider parents and rates
configuration except this is doing the setup in dts rather then using clock
consumer API in a clock provider driver.

Note that by adding the initial rate setting for audio_pll1/audio_pll
setting we need to remove it from imx8mq-librem5-devkit.dts
imx8mq-librem5-devkit.dts

Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Daniel Baluta <[email protected]>
---
Changes since v2:
- set rate for audio_pll1/audio_pll2 in the dtsi file and
remove the setting from imx8mq-librem5-devkit.dts

.../dts/freescale/imx8mq-librem5-devkit.dts | 5 -----
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 21 +++++++++++++++++++
2 files changed, 21 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 683a11035643..c702ccc82867 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -169,11 +169,6 @@
};
};

-&clk {
- assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
- assigned-clock-rates = <786432000>, <722534400>;
-};
-
&dphy {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 02fbd0625318..c67625a881a4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -494,6 +494,27 @@
clock-names = "ckil", "osc_25m", "osc_27m",
"clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
+ assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1>,
+ <&clk IMX8MQ_AUDIO_PLL1>,
+ <&clk IMX8MQ_AUDIO_PLL2>,
+ <&clk IMX8MQ_CLK_AHB>,
+ <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+ <&clk IMX8MQ_CLK_AUDIO_AHB>,
+ <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+ <&clk IMX8MQ_CLK_NOC>;
+ assigned-clock-parents = <0>,
+ <0>,
+ <0>,
+ <&clk IMX8MQ_SYS1_PLL_133M>,
+ <&clk IMX8MQ_SYS1_PLL_266M>,
+ <&clk IMX8MQ_SYS2_PLL_500M>,
+ <&clk IMX8MQ_CLK_27M>,
+ <&clk IMX8MQ_SYS1_PLL_800M>;
+ assigned-clock-rates = <593999999>,
+ <786432000>,
+ <722534400>;
+
+
};

src: reset-controller@30390000 {
--
2.17.1

2019-07-28 14:54:23

by Angus Ainslie

Subject: Re: [PATCH v3] arm64: dts: imx8mq: Init rates and parents configs for clocks

Hi Daniel,

On 2019-07-28 07:12, Daniel Baluta wrote:
> From: Abel Vesa <[email protected]>
>
> Add the initial configuration for clocks that need default parent and
> rate
> setting. This is based on the vendor tree clock provider parents and
> rates
> configuration except this is doing the setup in dts rather then using
> clock
> consumer API in a clock provider driver.
>
> Note that by adding the initial rate setting for audio_pll1/audio_pll
> setting we need to remove it from imx8mq-librem5-devkit.dts
> imx8mq-librem5-devkit.dts
>
> Signed-off-by: Abel Vesa <[email protected]>
> Signed-off-by: Daniel Baluta <[email protected]>

This works with our board. One small nit below

Tested-by: Angus Ainslie (Purism) <[email protected]>

> ---
> Changes since v2:
> - set rate for audio_pll1/audio_pll2 in the dtsi file and
> remove the setting from imx8mq-librem5-devkit.dts
>
> .../dts/freescale/imx8mq-librem5-devkit.dts | 5 -----
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 21 +++++++++++++++++++
> 2 files changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index 683a11035643..c702ccc82867 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -169,11 +169,6 @@
> };
> };
>
> -&clk {
> - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
> - assigned-clock-rates = <786432000>, <722534400>;
> -};
> -
> &dphy {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 02fbd0625318..c67625a881a4 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -494,6 +494,27 @@
> clock-names = "ckil", "osc_25m", "osc_27m",
> "clk_ext1", "clk_ext2",
> "clk_ext3", "clk_ext4";
> + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1>,
> + <&clk IMX8MQ_AUDIO_PLL1>,
> + <&clk IMX8MQ_AUDIO_PLL2>,
> + <&clk IMX8MQ_CLK_AHB>,
> + <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
> + <&clk IMX8MQ_CLK_AUDIO_AHB>,
> + <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
> + <&clk IMX8MQ_CLK_NOC>;
> + assigned-clock-parents = <0>,
> + <0>,
> + <0>,
> + <&clk IMX8MQ_SYS1_PLL_133M>,
> + <&clk IMX8MQ_SYS1_PLL_266M>,
> + <&clk IMX8MQ_SYS2_PLL_500M>,
> + <&clk IMX8MQ_CLK_27M>,
> + <&clk IMX8MQ_SYS1_PLL_800M>;
> + assigned-clock-rates = <593999999>,
> + <786432000>,
> + <722534400>;
> +
> +

Extra whitespace

Angus

> };
>
> src: reset-controller@30390000 {

2019-07-28 15:26:28

by Daniel Baluta

Subject: Re: [PATCH v3] arm64: dts: imx8mq: Init rates and parents configs for clocks

On Sun, Jul 28, 2019 at 5:53 PM Angus Ainslie <[email protected]> wrote:
>
> Hi Daniel,
>
> On 2019-07-28 07:12, Daniel Baluta wrote:
> > From: Abel Vesa <[email protected]>
> >
> > Add the initial configuration for clocks that need default parent and
> > rate
> > setting. This is based on the vendor tree clock provider parents and
> > rates
> > configuration except this is doing the setup in dts rather then using
> > clock
> > consumer API in a clock provider driver.
> >
> > Note that by adding the initial rate setting for audio_pll1/audio_pll
> > setting we need to remove it from imx8mq-librem5-devkit.dts
> > imx8mq-librem5-devkit.dts
> >
> > Signed-off-by: Abel Vesa <[email protected]>
> > Signed-off-by: Daniel Baluta <[email protected]>
>
> This works with our board. One small nit below
>
> Tested-by: Angus Ainslie (Purism) <[email protected]>
>
> > ---
> > Changes since v2:
> > - set rate for audio_pll1/audio_pll2 in the dtsi file and
> > remove the setting from imx8mq-librem5-devkit.dts
> >
> > .../dts/freescale/imx8mq-librem5-devkit.dts | 5 -----
> > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 21 +++++++++++++++++++
> > 2 files changed, 21 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> > b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> > index 683a11035643..c702ccc82867 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> > @@ -169,11 +169,6 @@
> > };
> > };
> >
> > -&clk {
> > - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
> > - assigned-clock-rates = <786432000>, <722534400>;
> > -};
> > -
> > &dphy {
> > status = "okay";
> > };
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > index 02fbd0625318..c67625a881a4 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > @@ -494,6 +494,27 @@
> > clock-names = "ckil", "osc_25m", "osc_27m",
> > "clk_ext1", "clk_ext2",
> > "clk_ext3", "clk_ext4";
> > + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1>,
> > + <&clk IMX8MQ_AUDIO_PLL1>,
> > + <&clk IMX8MQ_AUDIO_PLL2>,
> > + <&clk IMX8MQ_CLK_AHB>,
> > + <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
> > + <&clk IMX8MQ_CLK_AUDIO_AHB>,
> > + <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
> > + <&clk IMX8MQ_CLK_NOC>;
> > + assigned-clock-parents = <0>,
> > + <0>,
> > + <0>,
> > + <&clk IMX8MQ_SYS1_PLL_133M>,
> > + <&clk IMX8MQ_SYS1_PLL_266M>,
> > + <&clk IMX8MQ_SYS2_PLL_500M>,
> > + <&clk IMX8MQ_CLK_27M>,
> > + <&clk IMX8MQ_SYS1_PLL_800M>;
> > + assigned-clock-rates = <593999999>,
> > + <786432000>,
> > + <722534400>;
> > +
> > +
>
> Extra whitespace

Thanks Angus for testing. Fixed in v4.

2019-07-29 08:34:12

by Guido Günther

Subject: Re: [PATCH v3] arm64: dts: imx8mq: Init rates and parents configs for clocks

Hi,
On Sun, Jul 28, 2019 at 05:12:18PM +0300, Daniel Baluta wrote:
> From: Abel Vesa <[email protected]>
>
> Add the initial configuration for clocks that need default parent and rate
> setting. This is based on the vendor tree clock provider parents and rates
> configuration except this is doing the setup in dts rather then using clock
> consumer API in a clock provider driver.
>
> Note that by adding the initial rate setting for audio_pll1/audio_pll
> setting we need to remove it from imx8mq-librem5-devkit.dts
> imx8mq-librem5-devkit.dts
>
> Signed-off-by: Abel Vesa <[email protected]>
> Signed-off-by: Daniel Baluta <[email protected]>
> ---
> Changes since v2:
> - set rate for audio_pll1/audio_pll2 in the dtsi file and
> remove the setting from imx8mq-librem5-devkit.dts
>
> .../dts/freescale/imx8mq-librem5-devkit.dts | 5 -----
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 21 +++++++++++++++++++
> 2 files changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index 683a11035643..c702ccc82867 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -169,11 +169,6 @@
> };
> };
>
> -&clk {
> - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
> - assigned-clock-rates = <786432000>, <722534400>;
> -};
> -
> &dphy {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 02fbd0625318..c67625a881a4 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -494,6 +494,27 @@
> clock-names = "ckil", "osc_25m", "osc_27m",
> "clk_ext1", "clk_ext2",
> "clk_ext3", "clk_ext4";
> + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1>,
> + <&clk IMX8MQ_AUDIO_PLL1>,
> + <&clk IMX8MQ_AUDIO_PLL2>,
> + <&clk IMX8MQ_CLK_AHB>,
> + <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
> + <&clk IMX8MQ_CLK_AUDIO_AHB>,
> + <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
> + <&clk IMX8MQ_CLK_NOC>;
> + assigned-clock-parents = <0>,
> + <0>,
> + <0>,
> + <&clk IMX8MQ_SYS1_PLL_133M>,
> + <&clk IMX8MQ_SYS1_PLL_266M>,
> + <&clk IMX8MQ_SYS2_PLL_500M>,
> + <&clk IMX8MQ_CLK_27M>,
> + <&clk IMX8MQ_SYS1_PLL_800M>;
> + assigned-clock-rates = <593999999>,
> + <786432000>,
> + <722534400>;
> +
> +
> };
>
> src: reset-controller@30390000 {

togethe with http://code.bulix.org/pd88jp-812381?raw tested on
linux-20190725 (plus mipi dsi):

Tested-by: Guido G?nther <[email protected]>

Cheers,
-- Guido

> --
> 2.17.1
>

2019-07-29 12:13:41

by Daniel Baluta

Subject: Re: [PATCH v3] arm64: dts: imx8mq: Init rates and parents configs for clocks

On Mon, Jul 29, 2019 at 11:32 AM Guido Günther <[email protected]> wrote:
>
> Hi,
> On Sun, Jul 28, 2019 at 05:12:18PM +0300, Daniel Baluta wrote:
> > From: Abel Vesa <[email protected]>
> >
> > Add the initial configuration for clocks that need default parent and rate
> > setting. This is based on the vendor tree clock provider parents and rates
> > configuration except this is doing the setup in dts rather then using clock
> > consumer API in a clock provider driver.
> >
> > Note that by adding the initial rate setting for audio_pll1/audio_pll
> > setting we need to remove it from imx8mq-librem5-devkit.dts
> > imx8mq-librem5-devkit.dts
> >
> > Signed-off-by: Abel Vesa <[email protected]>
> > Signed-off-by: Daniel Baluta <[email protected]>
> > ---
> > Changes since v2:
> > - set rate for audio_pll1/audio_pll2 in the dtsi file and
> > remove the setting from imx8mq-librem5-devkit.dts
> >
> > .../dts/freescale/imx8mq-librem5-devkit.dts | 5 -----
> > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 21 +++++++++++++++++++
> > 2 files changed, 21 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> > index 683a11035643..c702ccc82867 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> > @@ -169,11 +169,6 @@
> > };
> > };
> >
> > -&clk {
> > - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
> > - assigned-clock-rates = <786432000>, <722534400>;
> > -};
> > -
> > &dphy {
> > status = "okay";
> > };
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > index 02fbd0625318..c67625a881a4 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > @@ -494,6 +494,27 @@
> > clock-names = "ckil", "osc_25m", "osc_27m",
> > "clk_ext1", "clk_ext2",
> > "clk_ext3", "clk_ext4";
> > + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1>,
> > + <&clk IMX8MQ_AUDIO_PLL1>,
> > + <&clk IMX8MQ_AUDIO_PLL2>,
> > + <&clk IMX8MQ_CLK_AHB>,
> > + <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
> > + <&clk IMX8MQ_CLK_AUDIO_AHB>,
> > + <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
> > + <&clk IMX8MQ_CLK_NOC>;
> > + assigned-clock-parents = <0>,
> > + <0>,
> > + <0>,
> > + <&clk IMX8MQ_SYS1_PLL_133M>,
> > + <&clk IMX8MQ_SYS1_PLL_266M>,
> > + <&clk IMX8MQ_SYS2_PLL_500M>,
> > + <&clk IMX8MQ_CLK_27M>,
> > + <&clk IMX8MQ_SYS1_PLL_800M>;
> > + assigned-clock-rates = <593999999>,
> > + <786432000>,
> > + <722534400>;
> > +
> > +
> > };
> >
> > src: reset-controller@30390000 {
>
> togethe with http://code.bulix.org/pd88jp-812381?raw tested on
> linux-20190725 (plus mipi dsi):
>
> Tested-by: Guido Günther <[email protected]>

Thanks for testing this Guido. Can you please add your Tested-by
to my fourth version of the patch.

[PATCH v4] arm64: dts: imx8mq: Init rates and parents configs for clocks