This is the start of the stable review cycle for the 5.4.168 release.
There are 71 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.168-rc1
Juergen Gross <[email protected]>
xen/netback: don't queue unlimited number of packages
Juergen Gross <[email protected]>
xen/netback: fix rx queue stall detection
Juergen Gross <[email protected]>
xen/console: harden hvc_xen against event channel storms
Juergen Gross <[email protected]>
xen/netfront: harden netfront against event channel storms
Juergen Gross <[email protected]>
xen/blkfront: harden blkfront against event channel storms
Magnus Karlsson <[email protected]>
Revert "xsk: Do not sleep in poll() when need_wakeup set"
Leon Romanovsky <[email protected]>
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
Felix Fietkau <[email protected]>
mac80211: fix regression in SSN handling of addba tx
Paul E. McKenney <[email protected]>
rcu: Mark accesses to rcu_state.n_force_qs
George Kennedy <[email protected]>
scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()
Miklos Szeredi <[email protected]>
ovl: fix warning in ovl_create_real()
Miklos Szeredi <[email protected]>
fuse: annotate lock in fuse_reverse_inval_entry()
Pavel Skripkin <[email protected]>
media: mxl111sf: change mutex_init() location
Magnus Karlsson <[email protected]>
xsk: Do not sleep in poll() when need_wakeup set
Fabio Estevam <[email protected]>
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
Nathan Chancellor <[email protected]>
Input: touchscreen - avoid bitwise vs logical OR warning
Nathan Chancellor <[email protected]>
mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO
Johannes Berg <[email protected]>
mac80211: validate extended element ID is present
Le Ma <[email protected]>
drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORE
George Kennedy <[email protected]>
libata: if T_LENGTH is zero, dma direction should be DMA_NONE
Yu Liao <[email protected]>
timekeeping: Really make sure wall_to_monotonic isn't positive
Daniele Palmas <[email protected]>
USB: serial: option: add Telit FN990 compositions
Johan Hovold <[email protected]>
USB: serial: cp210x: fix CP2105 GPIO registration
Nehal Bakulchandra Shah <[email protected]>
usb: xhci: Extend support for runtime power management for AMD's Yellow carp.
Stefan Roese <[email protected]>
PCI/MSI: Mask MSI-X vectors only on success
Thomas Gleixner <[email protected]>
PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error
Jimmy Wang <[email protected]>
USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)
Greg Kroah-Hartman <[email protected]>
USB: gadget: bRequestType is a bitfield, not a enum
Eric Dumazet <[email protected]>
sit: do not call ipip6_dev_free() from sit_init_net()
Florian Fainelli <[email protected]>
net: systemport: Add global locking for descriptor lifecycle
D. Wythe <[email protected]>
net/smc: Prevent smc_release() from long blocking
Gal Pressman <[email protected]>
net: Fix double 0x prefix print in SKB dump
Willem de Bruijn <[email protected]>
net/packet: rx_owner_map depends on pg_vec
Haimin Zhang <[email protected]>
netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
Cyril Novikov <[email protected]>
ixgbe: set X550 MDIO speed before talking to PHY
Letu Ren <[email protected]>
igbvf: fix double free in `igbvf_probe`
Karen Sornek <[email protected]>
igb: Fix removal of unicast MAC filters of VFs
Nathan Chancellor <[email protected]>
soc/tegra: fuse: Fix bitwise vs. logical OR warning
Hangyu Hua <[email protected]>
rds: memory leak in __rds_conn_create()
Baowen Zheng <[email protected]>
flow_offload: return EOPNOTSUPP for the unsupported mpls action type
Vlad Buslov <[email protected]>
net: sched: lock action when translating it to flow_action infra
Johannes Berg <[email protected]>
mac80211: fix lookup when adding AddBA extension element
Johannes Berg <[email protected]>
mac80211: accept aggregation sessions on 6 GHz
Johannes Berg <[email protected]>
mac80211: agg-tx: don't schedule_and_wake_txq() under sta->lock
Mordechay Goodstein <[email protected]>
mac80211: agg-tx: refactor sending addba
Hangbin Liu <[email protected]>
selftest/net/forwarding: declare NETIFS p9 p10
Alyssa Ross <[email protected]>
dmaengine: st_fdma: fix MODULE_ALIAS
David Ahern <[email protected]>
selftests: Fix IPv6 address bind tests
David Ahern <[email protected]>
selftests: Fix raw socket bind tests with VRF
Eric Dumazet <[email protected]>
inet_diag: fix kernel-infoleak for UDP sockets
Eric Dumazet <[email protected]>
inet_diag: use jiffies_delta_to_msecs()
Eric Dumazet <[email protected]>
sch_cake: do not call cake_destroy() from cake_init()
Philipp Rudo <[email protected]>
s390/kexec_file: fix error handling when applying relocations
Jie2x Zhou <[email protected]>
selftests: net: Correct ping6 expected rc from 2 to 1
Mike Tipton <[email protected]>
clk: Don't parent clks until the parent is fully registered
Dinh Nguyen <[email protected]>
ARM: socfpga: dts: fix qspi node compatible
Randy Dunlap <[email protected]>
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
Johannes Berg <[email protected]>
mac80211: track only QoS data frames for admission control
Alex Bee <[email protected]>
arm64: dts: rockchip: fix audio-supply for Rock Pi 4
John Keeping <[email protected]>
arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply
Artem Lapkin <[email protected]>
arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
J. Bruce Fields <[email protected]>
nfsd: fix use-after-free due to delegation race
Fabrice Gasnier <[email protected]>
iio: adc: stm32: fix a current leak by resetting pcsel before disabling vdda
Paul Moore <[email protected]>
audit: improve robustness of the audit queue handling
Joe Thornber <[email protected]>
dm btree remove: fix use after free in rebalance_children()
Jerome Marchand <[email protected]>
recordmcount.pl: look for jgnop instruction as well as bcrl on s390
Will Deacon <[email protected]>
virtio_ring: Fix querying of maximum DMA mapping size for virtio device
Sudeep Holla <[email protected]>
firmware: arm_scpi: Fix string overflow in SCPI genpd driver
Felix Fietkau <[email protected]>
mac80211: send ADDBA requests using the tid/queue of the aggregation session
Johannes Berg <[email protected]>
mac80211: mark TX-during-stop for TX in in_reconfig
Vitaly Kuznetsov <[email protected]>
KVM: selftests: Make sure kvm_create_max_vcpus test won't hit RLIMIT_NOFILE
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/imx6ull-pinfunc.h | 2 +-
arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts | 2 +-
arch/arm/boot/dts/socfpga_arria5_socdk.dts | 2 +-
arch/arm/boot/dts/socfpga_cyclone5_socdk.dts | 2 +-
arch/arm/boot/dts/socfpga_cyclone5_sockit.dts | 2 +-
arch/arm/boot/dts/socfpga_cyclone5_socrates.dts | 2 +-
arch/arm/boot/dts/socfpga_cyclone5_sodia.dts | 2 +-
arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts | 4 +-
.../boot/dts/rockchip/rk3399-khadas-edge.dtsi | 1 -
arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 2 +-
arch/s390/kernel/machine_kexec_file.c | 7 +-
drivers/ata/libata-scsi.c | 15 ++-
drivers/block/xen-blkfront.c | 15 ++-
drivers/clk/clk.c | 15 ++-
drivers/dma/st_fdma.c | 2 +-
drivers/firmware/scpi_pm_domain.c | 10 +-
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 4 +-
drivers/hv/Kconfig | 1 +
drivers/iio/adc/stm32-adc.c | 1 +
drivers/input/touchscreen/of_touchscreen.c | 18 +--
drivers/md/persistent-data/dm-btree-remove.c | 2 +-
drivers/media/usb/dvb-usb-v2/mxl111sf.c | 16 ++-
drivers/net/ethernet/broadcom/bcmsysport.c | 5 +-
drivers/net/ethernet/broadcom/bcmsysport.h | 1 +
drivers/net/ethernet/intel/igb/igb_main.c | 28 ++---
drivers/net/ethernet/intel/igbvf/netdev.c | 1 +
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 3 +
drivers/net/netdevsim/bpf.c | 1 +
drivers/net/wireless/marvell/mwifiex/cmdevt.c | 4 +-
drivers/net/wireless/marvell/mwifiex/fw.h | 8 +-
drivers/net/xen-netback/common.h | 1 +
drivers/net/xen-netback/rx.c | 77 ++++++++-----
drivers/net/xen-netfront.c | 125 ++++++++++++++++-----
drivers/pci/msi.c | 15 ++-
drivers/scsi/scsi_debug.c | 4 +-
drivers/soc/tegra/fuse/fuse-tegra.c | 2 +-
drivers/soc/tegra/fuse/fuse.h | 2 +-
drivers/tty/hvc/hvc_xen.c | 30 ++++-
drivers/usb/core/quirks.c | 3 +
drivers/usb/gadget/composite.c | 6 +-
drivers/usb/gadget/legacy/dbgp.c | 6 +-
drivers/usb/gadget/legacy/inode.c | 6 +-
drivers/usb/host/xhci-pci.c | 6 +-
drivers/usb/serial/cp210x.c | 6 +-
drivers/usb/serial/option.c | 8 ++
drivers/virtio/virtio_ring.c | 2 +-
fs/fuse/dir.c | 2 +-
fs/nfsd/nfs4state.c | 9 +-
fs/overlayfs/dir.c | 3 +-
fs/overlayfs/overlayfs.h | 1 +
fs/overlayfs/super.c | 12 +-
include/net/tc_act/tc_tunnel_key.h | 7 +-
kernel/audit.c | 21 ++--
kernel/rcu/tree.c | 10 +-
kernel/time/timekeeping.c | 3 +-
net/core/skbuff.c | 2 +-
net/ipv4/inet_diag.c | 19 ++--
net/ipv6/sit.c | 1 -
net/mac80211/agg-rx.c | 8 +-
net/mac80211/agg-tx.c | 80 ++++++++-----
net/mac80211/driver-ops.h | 5 +-
net/mac80211/mlme.c | 13 ++-
net/mac80211/sta_info.h | 1 +
net/mac80211/util.c | 2 +
net/packet/af_packet.c | 5 +-
net/rds/connection.c | 1 +
net/sched/act_sample.c | 2 -
net/sched/cls_api.c | 18 ++-
net/sched/sch_cake.c | 6 +-
net/smc/af_smc.c | 4 +-
scripts/recordmcount.pl | 2 +-
tools/testing/selftests/kvm/kvm_create_max_vcpus.c | 30 +++++
tools/testing/selftests/net/fcnal-test.sh | 23 ++--
.../net/forwarding/forwarding.config.sample | 2 +
76 files changed, 525 insertions(+), 250 deletions(-)
From: Florian Fainelli <[email protected]>
[ Upstream commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 ]
The descriptor list is a shared resource across all of the transmit queues, and
the locking mechanism used today only protects concurrency across a given
transmit queue between the transmit and reclaiming. This creates an opportunity
for the SYSTEMPORT hardware to work on corrupted descriptors if we have
multiple producers at once which is the case when using multiple transmit
queues.
This was particularly noticeable when using multiple flows/transmit queues and
it showed up in interesting ways in that UDP packets would get a correct UDP
header checksum being calculated over an incorrect packet length. Similarly TCP
packets would get an equally correct checksum computed by the hardware over an
incorrect packet length.
The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges
when the driver produces a new descriptor anytime it writes to the
WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to
re-organize its descriptors and it is possible that concurrent TX queues
eventually break this internal allocation scheme to the point where the
length/status part of the descriptor gets used for an incorrect data buffer.
The fix is to impose a global serialization for all TX queues in the short
section where we are writing to the WRITE_PORT_{HI,LO} registers which solves
the corruption even with multiple concurrent TX queues being used.
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 5 ++++-
drivers/net/ethernet/broadcom/bcmsysport.h | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 470d12e308814..5a2094a281e15 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -1277,11 +1277,11 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
struct bcm_sysport_priv *priv = netdev_priv(dev);
struct device *kdev = &priv->pdev->dev;
struct bcm_sysport_tx_ring *ring;
+ unsigned long flags, desc_flags;
struct bcm_sysport_cb *cb;
struct netdev_queue *txq;
u32 len_status, addr_lo;
unsigned int skb_len;
- unsigned long flags;
dma_addr_t mapping;
u16 queue;
int ret;
@@ -1339,8 +1339,10 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
ring->desc_count--;
/* Ports are latched, so write upper address first */
+ spin_lock_irqsave(&priv->desc_lock, desc_flags);
tdma_writel(priv, len_status, TDMA_WRITE_PORT_HI(ring->index));
tdma_writel(priv, addr_lo, TDMA_WRITE_PORT_LO(ring->index));
+ spin_unlock_irqrestore(&priv->desc_lock, desc_flags);
/* Check ring space and update SW control flow */
if (ring->desc_count == 0)
@@ -1970,6 +1972,7 @@ static int bcm_sysport_open(struct net_device *dev)
}
/* Initialize both hardware and software ring */
+ spin_lock_init(&priv->desc_lock);
for (i = 0; i < dev->num_tx_queues; i++) {
ret = bcm_sysport_init_tx_ring(priv, i);
if (ret) {
diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h
index 6d80735fbc7f4..57336ca3f4277 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -742,6 +742,7 @@ struct bcm_sysport_priv {
int wol_irq;
/* Transmit rings */
+ spinlock_t desc_lock;
struct bcm_sysport_tx_ring *tx_rings;
/* Receive queue */
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit e28587cc491ef0f3c51258fdc87fbc386b1d4c59 ]
ipip6_dev_free is sit dev->priv_destructor, already called
by register_netdevice() if something goes wrong.
Alternative would be to make ipip6_dev_free() robust against
multiple invocations, but other drivers do not implement this
strategy.
syzbot reported:
dst_release underflow
WARNING: CPU: 0 PID: 5059 at net/core/dst.c:173 dst_release+0xd8/0xe0 net/core/dst.c:173
Modules linked in:
CPU: 1 PID: 5059 Comm: syz-executor.4 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dst_release+0xd8/0xe0 net/core/dst.c:173
Code: 4c 89 f2 89 d9 31 c0 5b 41 5e 5d e9 da d5 44 f9 e8 1d 90 5f f9 c6 05 87 48 c6 05 01 48 c7 c7 80 44 99 8b 31 c0 e8 e8 67 29 f9 <0f> 0b eb 85 0f 1f 40 00 53 48 89 fb e8 f7 8f 5f f9 48 83 c3 a8 48
RSP: 0018:ffffc9000aa5faa0 EFLAGS: 00010246
RAX: d6894a925dd15a00 RBX: 00000000ffffffff RCX: 0000000000040000
RDX: ffffc90005e19000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 0000000000000000 R08: ffffffff816a1f42 R09: ffffed1017344f2c
R10: ffffed1017344f2c R11: 0000000000000000 R12: 0000607f462b1358
R13: 1ffffffff1bfd305 R14: ffffe8ffffcb1358 R15: dffffc0000000000
FS: 00007f66c71a2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f88aaed5058 CR3: 0000000023e0f000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dst_cache_destroy+0x107/0x1e0 net/core/dst_cache.c:160
ipip6_dev_free net/ipv6/sit.c:1414 [inline]
sit_init_net+0x229/0x550 net/ipv6/sit.c:1936
ops_init+0x313/0x430 net/core/net_namespace.c:140
setup_net+0x35b/0x9d0 net/core/net_namespace.c:326
copy_net_ns+0x359/0x5c0 net/core/net_namespace.c:470
create_new_namespaces+0x4ce/0xa00 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0x11e/0x180 kernel/nsproxy.c:226
ksys_unshare+0x57d/0xb50 kernel/fork.c:3075
__do_sys_unshare kernel/fork.c:3146 [inline]
__se_sys_unshare kernel/fork.c:3144 [inline]
__x64_sys_unshare+0x34/0x40 kernel/fork.c:3144
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f66c882ce99
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f66c71a2168 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f66c893ff60 RCX: 00007f66c882ce99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000048040200
RBP: 00007f66c8886ff1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff6634832f R14: 00007f66c71a2300 R15: 0000000000022000
</TASK>
Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/sit.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 7f9cae4c49e7e..16e75a996b749 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1876,7 +1876,6 @@ static int __net_init sit_init_net(struct net *net)
return 0;
err_reg_dev:
- ipip6_dev_free(sitn->fb_tunnel_dev);
free_netdev(sitn->fb_tunnel_dev);
err_alloc_dev:
return err;
--
2.33.0
From: Greg Kroah-Hartman <[email protected]>
[ Upstream commit f08adf5add9a071160c68bb2a61d697f39ab0758 ]
Szymon rightly pointed out that the previous check for the endpoint
direction in bRequestType was not looking at only the bit involved, but
rather the whole value. Normally this is ok, but for some request
types, bits other than bit 8 could be set and the check for the endpoint
length could not stall correctly.
Fix that up by only checking the single bit.
Fixes: 153a2d7e3350 ("USB: gadget: detect too-big endpoint 0 requests")
Cc: Felipe Balbi <[email protected]>
Reported-by: Szymon Heidrich <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/composite.c | 6 +++---
drivers/usb/gadget/legacy/dbgp.c | 6 +++---
drivers/usb/gadget/legacy/inode.c | 6 +++---
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index d2980e30f3417..c5acf5c39fb18 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1649,14 +1649,14 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
u8 endp;
if (w_length > USB_COMP_EP0_BUFSIZ) {
- if (ctrl->bRequestType == USB_DIR_OUT) {
- goto done;
- } else {
+ if (ctrl->bRequestType & USB_DIR_IN) {
/* Cast away the const, we are going to overwrite on purpose. */
__le16 *temp = (__le16 *)&ctrl->wLength;
*temp = cpu_to_le16(USB_COMP_EP0_BUFSIZ);
w_length = USB_COMP_EP0_BUFSIZ;
+ } else {
+ goto done;
}
}
diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c
index 355bc7dab9d5f..6bcbad3825802 100644
--- a/drivers/usb/gadget/legacy/dbgp.c
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -346,14 +346,14 @@ static int dbgp_setup(struct usb_gadget *gadget,
u16 len = 0;
if (length > DBGP_REQ_LEN) {
- if (ctrl->bRequestType == USB_DIR_OUT) {
- return err;
- } else {
+ if (ctrl->bRequestType & USB_DIR_IN) {
/* Cast away the const, we are going to overwrite on purpose. */
__le16 *temp = (__le16 *)&ctrl->wLength;
*temp = cpu_to_le16(DBGP_REQ_LEN);
length = DBGP_REQ_LEN;
+ } else {
+ return err;
}
}
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index f0aff79f544c3..5f1e15172403e 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1336,14 +1336,14 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
u16 w_length = le16_to_cpu(ctrl->wLength);
if (w_length > RBUF_SIZE) {
- if (ctrl->bRequestType == USB_DIR_OUT) {
- return value;
- } else {
+ if (ctrl->bRequestType & USB_DIR_IN) {
/* Cast away the const, we are going to overwrite on purpose. */
__le16 *temp = (__le16 *)&ctrl->wLength;
*temp = cpu_to_le16(RBUF_SIZE);
w_length = RBUF_SIZE;
+ } else {
+ return value;
}
}
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 06c41bda0ea14aa7fba932a9613c4ee239682cf0 ]
When we call ieee80211_agg_start_txq(), that will in turn call
schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb()
this is done under sta->lock, which leads to certain circular
lock dependencies, as reported by Chris Murphy:
https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com
In general, ieee80211_agg_start_txq() is usually not called
with sta->lock held, only in this one place. But it's always
called with sta->ampdu_mlme.mtx held, and that's therefore
clearly sufficient.
Change ieee80211_stop_tx_ba_cb() to also call it without the
sta->lock held, by factoring it out of ieee80211_remove_tid_tx()
(which is only called in this one place).
This breaks the locking chain and makes it less likely that
we'll have similar locking chain problems in the future.
Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation")
Reported-by: Chris Murphy <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211202152554.f519884c8784.I555fef8e67d93fff3d9a304886c4a9f8b322e591@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/agg-tx.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 1a5768ae5f515..d801ceb2ed7fa 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -9,7 +9,7 @@
* Copyright 2007, Michael Wu <[email protected]>
* Copyright 2007-2010, Intel Corporation
* Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2020 Intel Corporation
+ * Copyright (C) 2018 - 2021 Intel Corporation
*/
#include <linux/ieee80211.h>
@@ -213,6 +213,8 @@ ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
struct ieee80211_txq *txq = sta->sta.txq[tid];
struct txq_info *txqi;
+ lockdep_assert_held(&sta->ampdu_mlme.mtx);
+
if (!txq)
return;
@@ -290,7 +292,6 @@ static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid)
ieee80211_assign_tid_tx(sta, tid, NULL);
ieee80211_agg_splice_finish(sta->sdata, tid);
- ieee80211_agg_start_txq(sta, tid, false);
kfree_rcu(tid_tx, rcu_head);
}
@@ -871,6 +872,7 @@ void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid,
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
bool send_delba = false;
+ bool start_txq = false;
ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n",
sta->sta.addr, tid);
@@ -888,10 +890,14 @@ void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid,
send_delba = true;
ieee80211_remove_tid_tx(sta, tid);
+ start_txq = true;
unlock_sta:
spin_unlock_bh(&sta->lock);
+ if (start_txq)
+ ieee80211_agg_start_txq(sta, tid, false);
+
if (send_delba)
ieee80211_send_delba(sdata, sta->sta.addr, tid,
WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
--
2.33.0
From: Stefan Roese <[email protected]>
commit 83dbf898a2d45289be875deb580e93050ba67529 upstream.
Masking all unused MSI-X entries is done to ensure that a crash kernel
starts from a clean slate, which correponds to the reset state of the
device as defined in the PCI-E specificion 3.0 and later:
Vector Control for MSI-X Table Entries
--------------------------------------
"00: Mask bit: When this bit is set, the function is prohibited from
sending a message using this MSI-X Table entry.
...
This bit’s state after reset is 1 (entry is masked)."
A Marvell NVME device fails to deliver MSI interrupts after trying to
enable MSI-X interrupts due to that masking. It seems to take the MSI-X
mask bits into account even when MSI-X is disabled.
While not specification compliant, this can be cured by moving the masking
into the success path, so that the MSI-X table entries stay in device reset
state when the MSI-X setup fails.
[ tglx: Move it into the success path, add comment and amend changelog ]
Fixes: aa8092c1d1f1 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Stefan Roese <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: Bjorn Helgaas <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -827,9 +827,6 @@ static int msix_capability_init(struct p
goto out_disable;
}
- /* Ensure that all table entries are masked. */
- msix_mask_all(base, tsize);
-
ret = msix_setup_entries(dev, base, entries, nvec, affd);
if (ret)
goto out_disable;
@@ -852,6 +849,16 @@ static int msix_capability_init(struct p
/* Set MSI-X enabled bits and unmask the function */
pci_intx_for_msi(dev, 0);
dev->msix_enabled = 1;
+
+ /*
+ * Ensure that all table entries are masked to prevent
+ * stale entries from firing in a crash kernel.
+ *
+ * Done late to deal with a broken Marvell NVME device
+ * which takes the MSI-X mask bits into account even
+ * when MSI-X is disabled, which prevents MSI delivery.
+ */
+ msix_mask_all(base, tsize);
pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0);
pcibios_free_irq(dev);
From: Nehal Bakulchandra Shah <[email protected]>
commit f886d4fbb7c97b8f5f447c92d2dab99c841803c0 upstream.
AMD's Yellow Carp platform has few more XHCI controllers,
enable the runtime power management support for the same.
Signed-off-by: Nehal Bakulchandra Shah <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-pci.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -65,6 +65,8 @@
#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 0x161e
#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 0x15d6
#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 0x15d7
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7 0x161c
+#define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8 0x161f
#define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042
#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
@@ -303,7 +305,9 @@ static void xhci_pci_quirks(struct devic
pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 ||
pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 ||
pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 ||
- pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6))
+ pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 ||
+ pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7 ||
+ pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8))
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
if (xhci->quirks & XHCI_RESET_ON_RESUME)
From: Johan Hovold <[email protected]>
commit 83b67041f3eaf33f98a075249aa7f4c7617c2f85 upstream.
When generalising GPIO support and adding support for CP2102N, the GPIO
registration for some CP2105 devices accidentally broke. Specifically,
when all the pins of a port are in "modem" mode, and thus unavailable
for GPIO use, the GPIO chip would now be registered without having
initialised the number of GPIO lines. This would in turn be rejected by
gpiolib and some errors messages would be printed (but importantly probe
would still succeed).
Fix this by initialising the number of GPIO lines before registering the
GPIO chip.
Note that as for the other device types, and as when all CP2105 pins are
muxed for LED function, the GPIO chip is registered also when no pins
are available for GPIO use.
Reported-by: Maarten Brock <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: [email protected] # 4.19
Cc: Karoly Pados <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Tested-by: Maarten Brock <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1552,6 +1552,8 @@ static int cp2105_gpioconf_init(struct u
/* 2 banks of GPIO - One for the pins taken from each serial port */
if (intf_num == 0) {
+ priv->gc.ngpio = 2;
+
if (mode.eci == CP210X_PIN_MODE_MODEM) {
/* mark all GPIOs of this interface as reserved */
priv->gpio_altfunc = 0xff;
@@ -1562,8 +1564,9 @@ static int cp2105_gpioconf_init(struct u
priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
CP210X_ECI_GPIO_MODE_MASK) >>
CP210X_ECI_GPIO_MODE_OFFSET);
- priv->gc.ngpio = 2;
} else if (intf_num == 1) {
+ priv->gc.ngpio = 3;
+
if (mode.sci == CP210X_PIN_MODE_MODEM) {
/* mark all GPIOs of this interface as reserved */
priv->gpio_altfunc = 0xff;
@@ -1574,7 +1577,6 @@ static int cp2105_gpioconf_init(struct u
priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
CP210X_SCI_GPIO_MODE_MASK) >>
CP210X_SCI_GPIO_MODE_OFFSET);
- priv->gc.ngpio = 3;
} else {
return -ENODEV;
}
From: Yu Liao <[email protected]>
commit 4e8c11b6b3f0b6a283e898344f154641eda94266 upstream.
Even after commit e1d7ba873555 ("time: Always make sure wall_to_monotonic
isn't positive") it is still possible to make wall_to_monotonic positive
by running the following code:
int main(void)
{
struct timespec time;
clock_gettime(CLOCK_MONOTONIC, &time);
time.tv_nsec = 0;
clock_settime(CLOCK_REALTIME, &time);
return 0;
}
The reason is that the second parameter of timespec64_compare(), ts_delta,
may be unnormalized because the delta is calculated with an open coded
substraction which causes the comparison of tv_sec to yield the wrong
result:
wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -9, .tv_nsec = -900000000 }
That makes timespec64_compare() claim that wall_to_monotonic < ts_delta,
but actually the result should be wall_to_monotonic > ts_delta.
After normalization, the result of timespec64_compare() is correct because
the tv_sec comparison is not longer misleading:
wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -10, .tv_nsec = 100000000 }
Use timespec64_sub() to ensure that ts_delta is normalized, which fixes the
issue.
Fixes: e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive")
Signed-off-by: Yu Liao <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/time/timekeeping.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1236,8 +1236,7 @@ int do_settimeofday64(const struct times
timekeeping_forward_now(tk);
xt = tk_xtime(tk);
- ts_delta.tv_sec = ts->tv_sec - xt.tv_sec;
- ts_delta.tv_nsec = ts->tv_nsec - xt.tv_nsec;
+ ts_delta = timespec64_sub(*ts, xt);
if (timespec64_compare(&tk->wall_to_monotonic, &ts_delta) > 0) {
ret = -EINVAL;
From: Artem Lapkin <[email protected]>
[ Upstream commit 6dd0053683804427529ef3523f7872f473440a19 ]
Remove mmc-hs400-enhanced-strobe from the rk3399-khadas-edge dts to
improve compatibility with a wider range of eMMC chips.
Before (BJTD4R 29.1 GiB):
[ 7.001493] mmc2: CQHCI version 5.10
[ 7.027971] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
.......
[ 7.207086] mmc2: mmc_select_hs400es failed, error -110
[ 7.207129] mmc2: error -110 whilst initialising MMC card
[ 7.308893] mmc2: mmc_select_hs400es failed, error -110
[ 7.308921] mmc2: error -110 whilst initialising MMC card
[ 7.427524] mmc2: mmc_select_hs400es failed, error -110
[ 7.427546] mmc2: error -110 whilst initialising MMC card
[ 7.590993] mmc2: mmc_select_hs400es failed, error -110
[ 7.591012] mmc2: error -110 whilst initialising MMC card
After:
[ 6.960785] mmc2: CQHCI version 5.10
[ 6.984672] mmc2: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[ 7.175021] mmc2: Command Queue Engine enabled
[ 7.175053] mmc2: new HS400 MMC card at address 0001
[ 7.175808] mmcblk2: mmc2:0001 BJTD4R 29.1 GiB
[ 7.176033] mmcblk2boot0: mmc2:0001 BJTD4R 4.00 MiB
[ 7.176245] mmcblk2boot1: mmc2:0001 BJTD4R 4.00 MiB
[ 7.176495] mmcblk2rpmb: mmc2:0001 BJTD4R 4.00 MiB, chardev (242:0)
Fixes: c2aacceedc86 ("arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards")
Signed-off-by: Artem Lapkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index e87a04477440e..292ca70c512b5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -685,7 +685,6 @@ &sdmmc {
&sdhci {
bus-width = <8>;
mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
non-removable;
status = "okay";
};
--
2.33.0
From: John Keeping <[email protected]>
[ Upstream commit 2b454a90e2ccdd6e03f88f930036da4df577be76 ]
Correct a typo in the vin-supply property. The input supply is
always-on, so this mistake doesn't affect whether the supply is actually
enabled correctly.
Fixes: fc702ed49a86 ("arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC")
Signed-off-by: John Keeping <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index 73be38a537960..a72e77c261ef3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -49,7 +49,7 @@ vcc3v3_lan: vcc3v3-lan {
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vim-supply = <&vcc3v3_sys>;
+ vin-supply = <&vcc3v3_sys>;
};
vcc3v3_sys: vcc3v3-sys {
--
2.33.0
From: Le Ma <[email protected]>
commit f3a8076eb28cae1553958c629aecec479394bbe2 upstream.
should count on GC IP base address
Signed-off-by: Le Ma <[email protected]>
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2906,8 +2906,8 @@ static void gfx_v9_0_init_pg(struct amdg
AMD_PG_SUPPORT_CP |
AMD_PG_SUPPORT_GDS |
AMD_PG_SUPPORT_RLC_SMU_HS)) {
- WREG32(mmRLC_JUMP_TABLE_RESTORE,
- adev->gfx.rlc.cp_table_gpu_addr >> 8);
+ WREG32_SOC15(GC, 0, mmRLC_JUMP_TABLE_RESTORE,
+ adev->gfx.rlc.cp_table_gpu_addr >> 8);
gfx_v9_0_init_gfx_power_gating(adev);
}
}
From: Johannes Berg <[email protected]>
commit 768c0b19b50665e337c96858aa2b7928d6dcf756 upstream.
Before attempting to parse an extended element, verify that
the extended element ID is present.
Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Reported-by: [email protected]
Link: https://lore.kernel.org/r/20211211201023.f30a1b128c07.I5cacc176da94ba316877c6e10fe3ceec8b4dbd7d@changeid
Cc: [email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/util.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1227,6 +1227,8 @@ _ieee802_11_parse_elems_crc(const u8 *st
elems->max_idle_period_ie = (void *)pos;
break;
case WLAN_EID_EXTENSION:
+ if (!elen)
+ break;
if (pos[0] == WLAN_EID_EXT_HE_MU_EDCA &&
elen >= (sizeof(*elems->mu_edca_param_set) + 1)) {
elems->mu_edca_param_set = (void *)&pos[1];
From: Thomas Gleixner <[email protected]>
commit 94185adbfad56815c2c8401e16d81bdb74a79201 upstream.
PCI_MSIX_FLAGS_MASKALL is set in the MSI-X control register at MSI-X
interrupt setup time. It's cleared on success, but the error handling path
only clears the PCI_MSIX_FLAGS_ENABLE bit.
That's incorrect as the reset state of the PCI_MSIX_FLAGS_MASKALL bit is
zero. That can be observed via lspci:
Capabilities: [b0] MSI-X: Enable- Count=67 Masked+
Clear the bit in the error path to restore the reset state.
Fixes: 438553958ba1 ("PCI/MSI: Enable and mask MSI-X early")
Reported-by: Stefan Roese <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Stefan Roese <[email protected]>
Cc: [email protected]
Cc: Bjorn Helgaas <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/87tufevoqx.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -878,7 +878,7 @@ out_free:
free_msi_irqs(dev);
out_disable:
- pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
+ pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE, 0);
return ret;
}
From: Nathan Chancellor <[email protected]>
commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream.
A new warning in clang points out a few places in this driver where a
bitwise OR is being used with boolean types:
drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This use of a bitwise OR is intentional, as bitwise operations do not
short circuit, which allows all the calls to touchscreen_get_prop_u32()
to happen so that the last parameter is initialized while coalescing the
results of the calls to make a decision after they are all evaluated.
To make this clearer to the compiler, use the '|=' operator to assign
the result of each touchscreen_get_prop_u32() call to data_present,
which keeps the meaning of the code the same but makes it obvious that
every one of these calls is expected to happen.
Signed-off-by: Nathan Chancellor <[email protected]>
Reported-by: Nick Desaulniers <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/touchscreen/of_touchscreen.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/input/touchscreen/of_touchscreen.c
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -81,8 +81,8 @@ void touchscreen_parse_properties(struct
touchscreen_get_prop_u32(dev, "touchscreen-size-x",
input_abs_get_max(input,
axis) + 1,
- &maximum) |
- touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
+ &maximum);
+ data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
input_abs_get_fuzz(input, axis),
&fuzz);
if (data_present)
@@ -95,8 +95,8 @@ void touchscreen_parse_properties(struct
touchscreen_get_prop_u32(dev, "touchscreen-size-y",
input_abs_get_max(input,
axis) + 1,
- &maximum) |
- touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
+ &maximum);
+ data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
input_abs_get_fuzz(input, axis),
&fuzz);
if (data_present)
@@ -106,11 +106,11 @@ void touchscreen_parse_properties(struct
data_present = touchscreen_get_prop_u32(dev,
"touchscreen-max-pressure",
input_abs_get_max(input, axis),
- &maximum) |
- touchscreen_get_prop_u32(dev,
- "touchscreen-fuzz-pressure",
- input_abs_get_fuzz(input, axis),
- &fuzz);
+ &maximum);
+ data_present |= touchscreen_get_prop_u32(dev,
+ "touchscreen-fuzz-pressure",
+ input_abs_get_fuzz(input, axis),
+ &fuzz);
if (data_present)
touchscreen_set_params(input, axis, 0, maximum, fuzz);
From: Fabio Estevam <[email protected]>
commit 737e65c7956795b3553781fb7bc82fce1c39503f upstream.
According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.
Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.
There are no devicetree users in mainline that use the old name,
so just remove the old entry.
Fixes: c201369d4aa5 ("ARM: dts: imx6ull: add imx6ull support")
Reported-by: George Makarov <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/imx6ull-pinfunc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -82,6 +82,6 @@
#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0 0x0200 0x048C 0x0000 0x9 0x0
#endif /* __DTS_IMX6ULL_PINFUNC_H */
From: Johannes Berg <[email protected]>
[ Upstream commit 511ab0c1dfb260a6b17b8771109e8d63474473a7 ]
We should be doing the HE capabilities lookup based on the full
interface type so if P2P doesn't have HE but client has it doesn't
get confused. Fix that.
Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.010fc1d61137.If3a468145f29d670cb00a693bed559d8290ba693@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/agg-rx.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 7f245e9f114c2..49ec9bfb6c8e6 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -9,7 +9,7 @@
* Copyright 2007, Michael Wu <[email protected]>
* Copyright 2007-2010, Intel Corporation
* Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*/
/**
@@ -191,7 +191,8 @@ static void ieee80211_add_addbaext(struct ieee80211_sub_if_data *sdata,
sband = ieee80211_get_sband(sdata);
if (!sband)
return;
- he_cap = ieee80211_get_he_iftype_cap(sband, sdata->vif.type);
+ he_cap = ieee80211_get_he_iftype_cap(sband,
+ ieee80211_vif_type_p2p(&sdata->vif));
if (!he_cap)
return;
--
2.33.0
From: Vlad Buslov <[email protected]>
[ Upstream commit 7a47281439ba00b11fc098f36695522184ce5a82 ]
In order to remove dependency on rtnl lock, take action's tcfa_lock when
constructing its representation as flow_action_entry structure.
Refactor tcf_sample_get_group() to assume that caller holds tcf_lock and
don't take it manually. This callback is only called from flow_action infra
representation translator which now calls it with tcf_lock held, so this
refactoring is necessary to prevent deadlock.
Allocate memory with GFP_ATOMIC flag for ip_tunnel_info copy because
tcf_tunnel_info_copy() is only called from flow_action representation infra
code with tcf_lock spinlock taken.
Signed-off-by: Vlad Buslov <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/tc_act/tc_tunnel_key.h | 2 +-
net/sched/act_sample.c | 2 --
net/sched/cls_api.c | 17 +++++++++++------
3 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/include/net/tc_act/tc_tunnel_key.h b/include/net/tc_act/tc_tunnel_key.h
index 0689d9bcdf841..2b3df076e5b62 100644
--- a/include/net/tc_act/tc_tunnel_key.h
+++ b/include/net/tc_act/tc_tunnel_key.h
@@ -69,7 +69,7 @@ tcf_tunnel_info_copy(const struct tc_action *a)
if (tun) {
size_t tun_size = sizeof(*tun) + tun->options_len;
struct ip_tunnel_info *tun_copy = kmemdup(tun, tun_size,
- GFP_KERNEL);
+ GFP_ATOMIC);
return tun_copy;
}
diff --git a/net/sched/act_sample.c b/net/sched/act_sample.c
index 74450b0f69fc5..214f4efdd9920 100644
--- a/net/sched/act_sample.c
+++ b/net/sched/act_sample.c
@@ -265,14 +265,12 @@ tcf_sample_get_group(const struct tc_action *a,
struct tcf_sample *s = to_sample(a);
struct psample_group *group;
- spin_lock_bh(&s->tcf_lock);
group = rcu_dereference_protected(s->psample_group,
lockdep_is_held(&s->tcf_lock));
if (group) {
psample_group_take(group);
*destructor = tcf_psample_group_put;
}
- spin_unlock_bh(&s->tcf_lock);
return group;
}
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 7f20fd37e01e0..61aa63cc170b4 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -3436,7 +3436,7 @@ static void tcf_sample_get_group(struct flow_action_entry *entry,
int tc_setup_flow_action(struct flow_action *flow_action,
const struct tcf_exts *exts, bool rtnl_held)
{
- const struct tc_action *act;
+ struct tc_action *act;
int i, j, k, err = 0;
if (!exts)
@@ -3450,6 +3450,7 @@ int tc_setup_flow_action(struct flow_action *flow_action,
struct flow_action_entry *entry;
entry = &flow_action->entries[j];
+ spin_lock_bh(&act->tcfa_lock);
if (is_tcf_gact_ok(act)) {
entry->id = FLOW_ACTION_ACCEPT;
} else if (is_tcf_gact_shot(act)) {
@@ -3490,13 +3491,13 @@ int tc_setup_flow_action(struct flow_action *flow_action,
break;
default:
err = -EOPNOTSUPP;
- goto err_out;
+ goto err_out_locked;
}
} else if (is_tcf_tunnel_set(act)) {
entry->id = FLOW_ACTION_TUNNEL_ENCAP;
err = tcf_tunnel_encap_get_tunnel(entry, act);
if (err)
- goto err_out;
+ goto err_out_locked;
} else if (is_tcf_tunnel_release(act)) {
entry->id = FLOW_ACTION_TUNNEL_DECAP;
} else if (is_tcf_pedit(act)) {
@@ -3510,7 +3511,7 @@ int tc_setup_flow_action(struct flow_action *flow_action,
break;
default:
err = -EOPNOTSUPP;
- goto err_out;
+ goto err_out_locked;
}
entry->mangle.htype = tcf_pedit_htype(act, k);
entry->mangle.mask = tcf_pedit_mask(act, k);
@@ -3561,15 +3562,16 @@ int tc_setup_flow_action(struct flow_action *flow_action,
entry->mpls_mangle.ttl = tcf_mpls_ttl(act);
break;
default:
- goto err_out;
+ goto err_out_locked;
}
} else if (is_tcf_skbedit_ptype(act)) {
entry->id = FLOW_ACTION_PTYPE;
entry->ptype = tcf_skbedit_ptype(act);
} else {
err = -EOPNOTSUPP;
- goto err_out;
+ goto err_out_locked;
}
+ spin_unlock_bh(&act->tcfa_lock);
if (!is_tcf_pedit(act))
j++;
@@ -3583,6 +3585,9 @@ int tc_setup_flow_action(struct flow_action *flow_action,
tc_cleanup_flow_action(flow_action);
return err;
+err_out_locked:
+ spin_unlock_bh(&act->tcfa_lock);
+ goto err_out;
}
EXPORT_SYMBOL(tc_setup_flow_action);
--
2.33.0
From: Baowen Zheng <[email protected]>
[ Upstream commit 166b6a46b78bf8b9559a6620c3032f9fe492e082 ]
We need to return EOPNOTSUPP for the unsupported mpls action type when
setup the flow action.
In the original implement, we will return 0 for the unsupported mpls
action type, actually we do not setup it and the following actions
to the flow action entry.
Fixes: 9838b20a7fb2 ("net: sched: take rtnl lock in tc_setup_flow_action()")
Signed-off-by: Baowen Zheng <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/cls_api.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 61aa63cc170b4..a4c61205462ac 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -3562,6 +3562,7 @@ int tc_setup_flow_action(struct flow_action *flow_action,
entry->mpls_mangle.ttl = tcf_mpls_ttl(act);
break;
default:
+ err = -EOPNOTSUPP;
goto err_out_locked;
}
} else if (is_tcf_skbedit_ptype(act)) {
--
2.33.0
From: Johannes Berg <[email protected]>
[ Upstream commit d5e568c3a4ec2ddd23e7dc5ad5b0c64e4f22981a ]
For admission control, obviously all of that only works for
QoS data frames, otherwise we cannot even access the QoS
field in the header.
Syzbot reported (see below) an uninitialized value here due
to a status of a non-QoS nullfunc packet, which isn't even
long enough to contain the QoS header.
Fix this to only do anything for QoS data packets.
Reported-by: [email protected]
Fixes: 02219b3abca5 ("mac80211: add WMM admission control support")
Link: https://lore.kernel.org/r/20211122124737.dad29e65902a.Ieb04587afacb27c14e0de93ec1bfbefb238cc2a0@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/mlme.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ccaf2389ccc1d..5c727af01143f 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2418,11 +2418,18 @@ static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
u16 tx_time)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- u16 tid = ieee80211_get_tid(hdr);
- int ac = ieee80211_ac_from_tid(tid);
- struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
+ u16 tid;
+ int ac;
+ struct ieee80211_sta_tx_tspec *tx_tspec;
unsigned long now = jiffies;
+ if (!ieee80211_is_data_qos(hdr->frame_control))
+ return;
+
+ tid = ieee80211_get_tid(hdr);
+ ac = ieee80211_ac_from_tid(tid);
+ tx_tspec = &ifmgd->tx_tspec[ac];
+
if (likely(!tx_tspec->admitted_time))
return;
--
2.33.0
From: Nathan Chancellor <[email protected]>
[ Upstream commit a7083763619f7485ccdade160deb81737cf2732f ]
A new warning in clang points out two instances where boolean
expressions are being used with a bitwise OR instead of logical OR:
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
reg = tegra_fuse_read_spare(i) |
^~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
reg = tegra_fuse_read_spare(i) |
^~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning
2 warnings generated.
The motivation for the warning is that logical operations short circuit
while bitwise operations do not.
In this instance, tegra_fuse_read_spare() is not semantically returning
a boolean, it is returning a bit value. Use u32 for its return type so
that it can be used with either bitwise or boolean operators without any
warnings.
Fixes: 25cd5a391478 ("ARM: tegra: Add speedo-based process identification")
Link: https://github.com/ClangBuiltLinux/linux/issues/1488
Suggested-by: Michał Mirosław <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/tegra/fuse/fuse-tegra.c | 2 +-
drivers/soc/tegra/fuse/fuse.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index 3eb44e65b3261..1a54bac512b69 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -172,7 +172,7 @@ static struct platform_driver tegra_fuse_driver = {
};
builtin_platform_driver(tegra_fuse_driver);
-bool __init tegra_fuse_read_spare(unsigned int spare)
+u32 __init tegra_fuse_read_spare(unsigned int spare)
{
unsigned int offset = fuse->soc->info->spare + spare * 4;
diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h
index 7230cb3305033..6996cfc7cbca3 100644
--- a/drivers/soc/tegra/fuse/fuse.h
+++ b/drivers/soc/tegra/fuse/fuse.h
@@ -53,7 +53,7 @@ struct tegra_fuse {
void tegra_init_revision(void);
void tegra_init_apbmisc(void);
-bool __init tegra_fuse_read_spare(unsigned int spare);
+u32 __init tegra_fuse_read_spare(unsigned int spare);
u32 __init tegra_fuse_read_early(unsigned int offset);
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
--
2.33.0
From: Hangbin Liu <[email protected]>
[ Upstream commit 71da1aec215290e249d09c44c768df859f3a3bba ]
The recent GRE selftests defined NUM_NETIFS=10. If the users copy
forwarding.config.sample to forwarding.config directly, they will get
error "Command line is not complete" when run the GRE tests, because
create_netif_veth() failed with no interface name defined.
Fix it by extending the NETIFS with p9 and p10.
Fixes: 2800f2485417 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel")
Signed-off-by: Hangbin Liu <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/forwarding/forwarding.config.sample | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample
index e2adb533c8fcb..e71c61ee4cc67 100644
--- a/tools/testing/selftests/net/forwarding/forwarding.config.sample
+++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample
@@ -13,6 +13,8 @@ NETIFS[p5]=veth4
NETIFS[p6]=veth5
NETIFS[p7]=veth6
NETIFS[p8]=veth7
+NETIFS[p9]=veth8
+NETIFS[p10]=veth9
##############################################################################
# Defines
--
2.33.0
From: George Kennedy <[email protected]>
commit e0a2c28da11e2c2b963fc01d50acbf03045ac732 upstream.
In resp_mode_select() sanity check the block descriptor len to avoid UAF.
BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032
CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
<TASK>
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113
Link: https://lore.kernel.org/r/[email protected]
Reported-by: syzkaller <[email protected]>
Acked-by: Douglas Gilbert <[email protected]>
Signed-off-by: George Kennedy <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_debug.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2296,11 +2296,11 @@ static int resp_mode_select(struct scsi_
__func__, param_len, res);
md_len = mselect6 ? (arr[0] + 1) : (get_unaligned_be16(arr + 0) + 2);
bd_len = mselect6 ? arr[3] : get_unaligned_be16(arr + 6);
- if (md_len > 2) {
+ off = bd_len + (mselect6 ? 4 : 8);
+ if (md_len > 2 || off >= res) {
mk_sense_invalid_fld(scp, SDEB_IN_DATA, 0, -1);
return check_condition_result;
}
- off = bd_len + (mselect6 ? 4 : 8);
mpage = arr[off] & 0x3f;
ps = !!(arr[off] & 0x80);
if (ps) {
From: Paul E. McKenney <[email protected]>
commit 2431774f04d1050292054c763070021bade7b151 upstream.
This commit marks accesses to the rcu_state.n_force_qs. These data
races are hard to make happen, but syzkaller was equal to the task.
Reported-by: [email protected]
Acked-by: Marco Elver <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/rcu/tree.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -1602,7 +1602,7 @@ static void rcu_gp_fqs(bool first_time)
struct rcu_node *rnp = rcu_get_root();
WRITE_ONCE(rcu_state.gp_activity, jiffies);
- rcu_state.n_force_qs++;
+ WRITE_ONCE(rcu_state.n_force_qs, rcu_state.n_force_qs + 1);
if (first_time) {
/* Collect dyntick-idle snapshots. */
force_qs_rnp(dyntick_save_progress_counter);
@@ -2207,7 +2207,7 @@ static void rcu_do_batch(struct rcu_data
/* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */
if (count == 0 && rdp->qlen_last_fqs_check != 0) {
rdp->qlen_last_fqs_check = 0;
- rdp->n_force_qs_snap = rcu_state.n_force_qs;
+ rdp->n_force_qs_snap = READ_ONCE(rcu_state.n_force_qs);
} else if (count < rdp->qlen_last_fqs_check - qhimark)
rdp->qlen_last_fqs_check = count;
@@ -2535,10 +2535,10 @@ static void __call_rcu_core(struct rcu_d
} else {
/* Give the grace period a kick. */
rdp->blimit = DEFAULT_MAX_RCU_BLIMIT;
- if (rcu_state.n_force_qs == rdp->n_force_qs_snap &&
+ if (READ_ONCE(rcu_state.n_force_qs) == rdp->n_force_qs_snap &&
rcu_segcblist_first_pend_cb(&rdp->cblist) != head)
rcu_force_quiescent_state();
- rdp->n_force_qs_snap = rcu_state.n_force_qs;
+ rdp->n_force_qs_snap = READ_ONCE(rcu_state.n_force_qs);
rdp->qlen_last_fqs_check = rcu_segcblist_n_cbs(&rdp->cblist);
}
}
@@ -3029,7 +3029,7 @@ int rcutree_prepare_cpu(unsigned int cpu
/* Set up local state, ensuring consistent view of global state. */
raw_spin_lock_irqsave_rcu_node(rnp, flags);
rdp->qlen_last_fqs_check = 0;
- rdp->n_force_qs_snap = rcu_state.n_force_qs;
+ rdp->n_force_qs_snap = READ_ONCE(rcu_state.n_force_qs);
rdp->blimit = blimit;
if (rcu_segcblist_empty(&rdp->cblist) && /* No early-boot CBs? */
!rcu_segcblist_is_offloaded(&rdp->cblist))
From: Leon Romanovsky <[email protected]>
commit d086a1c65aabb5a4e1edc580ca583e2964c62b44 upstream.
The access of tcf_tunnel_info() produces the following splat, so fix it
by dereferencing the tcf_tunnel_key_params pointer with marker that
internal tcfa_liock is held.
=============================
WARNING: suspicious RCU usage
5.9.0+ #1 Not tainted
-----------------------------
include/net/tc_act/tc_tunnel_key.h:59 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by tc/34839:
#0: ffff88828572c2a0 (&p->tcfa_lock){+...}-{2:2}, at: tc_setup_flow_action+0xb3/0x48b5
stack backtrace:
CPU: 1 PID: 34839 Comm: tc Not tainted 5.9.0+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x9a/0xd0
tc_setup_flow_action+0x14cb/0x48b5
fl_hw_replace_filter+0x347/0x690 [cls_flower]
fl_change+0x2bad/0x4875 [cls_flower]
tc_new_tfilter+0xf6f/0x1ba0
rtnetlink_rcv_msg+0x5f2/0x870
netlink_rcv_skb+0x124/0x350
netlink_unicast+0x433/0x700
netlink_sendmsg+0x6f1/0xbd0
sock_sendmsg+0xb0/0xe0
____sys_sendmsg+0x4fa/0x6d0
___sys_sendmsg+0x12e/0x1b0
__sys_sendmsg+0xa4/0x120
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1f8cd4fe57
Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffdc1e193b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1f8cd4fe57
RDX: 0000000000000000 RSI: 00007ffdc1e19420 RDI: 0000000000000003
RBP: 000000005f85aafa R08: 0000000000000001 R09: 00007ffdc1e1936c
R10: 000000000040522d R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 00007ffdc1e1d6f0 R15: 0000000000482420
Fixes: 3ebaf6da0716 ("net: sched: Do not assume RTNL is held in tunnel key action helpers")
Fixes: 7a47281439ba ("net: sched: lock action when translating it to flow_action infra")
Signed-off-by: Leon Romanovsky <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/tc_act/tc_tunnel_key.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/include/net/tc_act/tc_tunnel_key.h
+++ b/include/net/tc_act/tc_tunnel_key.h
@@ -52,7 +52,10 @@ static inline struct ip_tunnel_info *tcf
{
#ifdef CONFIG_NET_CLS_ACT
struct tcf_tunnel_key *t = to_tunnel_key(a);
- struct tcf_tunnel_key_params *params = rtnl_dereference(t->params);
+ struct tcf_tunnel_key_params *params;
+
+ params = rcu_dereference_protected(t->params,
+ lockdep_is_held(&a->tcfa_lock));
return ¶ms->tcft_enc_metadata->u.tun_info;
#else
From: Juergen Gross <[email protected]>
commit 6032046ec4b70176d247a71836186d47b25d1684 upstream.
Commit 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when
not using GSO") introduced a security problem in netback, as an
interface would only be regarded to be stalled if no slot is available
in the rx queue ring page. In case the SKB at the head of the queued
requests will need more than one rx slot and only one slot is free the
stall detection logic will never trigger, as the test for that is only
looking for at least one slot to be free.
Fix that by testing for the needed number of slots instead of only one
slot being available.
In order to not have to take the rx queue lock that often, store the
number of needed slots in the queue data. As all SKB dequeue operations
happen in the rx queue kernel thread this is safe, as long as the
number of needed slots is accessed via READ/WRITE_ONCE() only and
updates are always done with the rx queue lock held.
Add a small helper for obtaining the number of free slots.
This is part of XSA-392
Fixes: 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO")
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netback/common.h | 1
drivers/net/xen-netback/rx.c | 65 ++++++++++++++++++++++++---------------
2 files changed, 42 insertions(+), 24 deletions(-)
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -203,6 +203,7 @@ struct xenvif_queue { /* Per-queue data
unsigned int rx_queue_max;
unsigned int rx_queue_len;
unsigned long last_rx_time;
+ unsigned int rx_slots_needed;
bool stalled;
struct xenvif_copy_state rx_copy;
--- a/drivers/net/xen-netback/rx.c
+++ b/drivers/net/xen-netback/rx.c
@@ -33,28 +33,36 @@
#include <xen/xen.h>
#include <xen/events.h>
-static bool xenvif_rx_ring_slots_available(struct xenvif_queue *queue)
+/*
+ * Update the needed ring page slots for the first SKB queued.
+ * Note that any call sequence outside the RX thread calling this function
+ * needs to wake up the RX thread via a call of xenvif_kick_thread()
+ * afterwards in order to avoid a race with putting the thread to sleep.
+ */
+static void xenvif_update_needed_slots(struct xenvif_queue *queue,
+ const struct sk_buff *skb)
{
- RING_IDX prod, cons;
- struct sk_buff *skb;
- int needed;
- unsigned long flags;
+ unsigned int needed = 0;
- spin_lock_irqsave(&queue->rx_queue.lock, flags);
-
- skb = skb_peek(&queue->rx_queue);
- if (!skb) {
- spin_unlock_irqrestore(&queue->rx_queue.lock, flags);
- return false;
+ if (skb) {
+ needed = DIV_ROUND_UP(skb->len, XEN_PAGE_SIZE);
+ if (skb_is_gso(skb))
+ needed++;
+ if (skb->sw_hash)
+ needed++;
}
- needed = DIV_ROUND_UP(skb->len, XEN_PAGE_SIZE);
- if (skb_is_gso(skb))
- needed++;
- if (skb->sw_hash)
- needed++;
+ WRITE_ONCE(queue->rx_slots_needed, needed);
+}
- spin_unlock_irqrestore(&queue->rx_queue.lock, flags);
+static bool xenvif_rx_ring_slots_available(struct xenvif_queue *queue)
+{
+ RING_IDX prod, cons;
+ unsigned int needed;
+
+ needed = READ_ONCE(queue->rx_slots_needed);
+ if (!needed)
+ return false;
do {
prod = queue->rx.sring->req_prod;
@@ -80,6 +88,9 @@ void xenvif_rx_queue_tail(struct xenvif_
spin_lock_irqsave(&queue->rx_queue.lock, flags);
+ if (skb_queue_empty(&queue->rx_queue))
+ xenvif_update_needed_slots(queue, skb);
+
__skb_queue_tail(&queue->rx_queue, skb);
queue->rx_queue_len += skb->len;
@@ -100,6 +111,8 @@ static struct sk_buff *xenvif_rx_dequeue
skb = __skb_dequeue(&queue->rx_queue);
if (skb) {
+ xenvif_update_needed_slots(queue, skb_peek(&queue->rx_queue));
+
queue->rx_queue_len -= skb->len;
if (queue->rx_queue_len < queue->rx_queue_max) {
struct netdev_queue *txq;
@@ -474,27 +487,31 @@ void xenvif_rx_action(struct xenvif_queu
xenvif_rx_copy_flush(queue);
}
-static bool xenvif_rx_queue_stalled(struct xenvif_queue *queue)
+static RING_IDX xenvif_rx_queue_slots(const struct xenvif_queue *queue)
{
RING_IDX prod, cons;
prod = queue->rx.sring->req_prod;
cons = queue->rx.req_cons;
+ return prod - cons;
+}
+
+static bool xenvif_rx_queue_stalled(const struct xenvif_queue *queue)
+{
+ unsigned int needed = READ_ONCE(queue->rx_slots_needed);
+
return !queue->stalled &&
- prod - cons < 1 &&
+ xenvif_rx_queue_slots(queue) < needed &&
time_after(jiffies,
queue->last_rx_time + queue->vif->stall_timeout);
}
static bool xenvif_rx_queue_ready(struct xenvif_queue *queue)
{
- RING_IDX prod, cons;
-
- prod = queue->rx.sring->req_prod;
- cons = queue->rx.req_cons;
+ unsigned int needed = READ_ONCE(queue->rx_slots_needed);
- return queue->stalled && prod - cons >= 1;
+ return queue->stalled && xenvif_rx_queue_slots(queue) >= needed;
}
bool xenvif_have_rx_work(struct xenvif_queue *queue, bool test_kthread)
From: Mike Tipton <[email protected]>
[ Upstream commit 54baf56eaa40aa5cdcd02b3c20d593e4e1211220 ]
Before commit fc0c209c147f ("clk: Allow parents to be specified without
string names") child clks couldn't find their parent until the parent
clk was added to a list in __clk_core_init(). After that commit, child
clks can reference their parent clks directly via a clk_hw pointer, or
they can lookup that clk_hw pointer via DT if the parent clk is
registered with an OF clk provider.
The common clk framework treats hw->core being non-NULL as "the clk is
registered" per the logic within clk_core_fill_parent_index():
parent = entry->hw->core;
/*
* We have a direct reference but it isn't registered yet?
* Orphan it and let clk_reparent() update the orphan status
* when the parent is registered.
*/
if (!parent)
Therefore we need to be extra careful to not set hw->core until the clk
is fully registered with the clk framework. Otherwise we can get into a
situation where a child finds a parent clk and we move the child clk off
the orphan list when the parent isn't actually registered, wrecking our
enable accounting and breaking critical clks.
Consider the following scenario:
CPU0 CPU1
---- ----
struct clk_hw clkBad;
struct clk_hw clkA;
clkA.init.parent_hws = { &clkBad };
clk_hw_register(&clkA) clk_hw_register(&clkBad)
... __clk_register()
hw->core = core
...
__clk_register()
__clk_core_init()
clk_prepare_lock()
__clk_init_parent()
clk_core_get_parent_by_index()
clk_core_fill_parent_index()
if (entry->hw) {
parent = entry->hw->core;
At this point, 'parent' points to clkBad even though clkBad hasn't been
fully registered yet. Ouch! A similar problem can happen if a clk
controller registers orphan clks that are referenced in the DT node of
another clk controller.
Let's fix all this by only setting the hw->core pointer underneath the
clk prepare lock in __clk_core_init(). This way we know that
clk_core_fill_parent_index() can't see hw->core be non-NULL until the
clk is fully registered.
Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names")
Signed-off-by: Mike Tipton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[[email protected]: Reword commit text, update comment]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 6ff87cd867121..e4e1b4e94a67b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3299,6 +3299,14 @@ static int __clk_core_init(struct clk_core *core)
clk_prepare_lock();
+ /*
+ * Set hw->core after grabbing the prepare_lock to synchronize with
+ * callers of clk_core_fill_parent_index() where we treat hw->core
+ * being NULL as the clk not being registered yet. This is crucial so
+ * that clks aren't parented until their parent is fully registered.
+ */
+ core->hw->core = core;
+
ret = clk_pm_runtime_get(core);
if (ret)
goto unlock;
@@ -3452,8 +3460,10 @@ static int __clk_core_init(struct clk_core *core)
out:
clk_pm_runtime_put(core);
unlock:
- if (ret)
+ if (ret) {
hlist_del_init(&core->child_node);
+ core->hw->core = NULL;
+ }
clk_prepare_unlock();
@@ -3699,7 +3709,6 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
core->num_parents = init->num_parents;
core->min_rate = 0;
core->max_rate = ULONG_MAX;
- hw->core = core;
ret = clk_core_populate_parent_map(core, init);
if (ret)
@@ -3717,7 +3726,7 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
goto fail_create_clk;
}
- clk_core_link_consumer(hw->core, hw->clk);
+ clk_core_link_consumer(core, hw->clk);
ret = __clk_core_init(core);
if (!ret)
--
2.33.0
From: Jie2x Zhou <[email protected]>
[ Upstream commit 92816e2629808726af015c7f5b14adc8e4f8b147 ]
./fcnal-test.sh -v -t ipv6_ping
TEST: ping out, VRF bind - ns-B IPv6 LLA [FAIL]
TEST: ping out, VRF bind - multicast IP [FAIL]
ping6 is failing as it should.
COMMAND: ip netns exec ns-A /bin/ping6 -c1 -w1 fe80::7c4c:bcff:fe66:a63a%red
strace of ping6 shows it is failing with '1',
so change the expected rc from 2 to 1.
Fixes: c0644e71df33 ("selftests: Add ipv6 ping tests to fcnal-test")
Reported-by: kernel test robot <[email protected]>
Suggested-by: David Ahern <[email protected]>
Signed-off-by: Jie2x Zhou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/fcnal-test.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 782a8da5d9500..475ac62373e92 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -1884,7 +1884,7 @@ ipv6_ping_vrf()
log_start
show_hint "Fails since VRF device does not support linklocal or multicast"
run_cmd ${ping6} -c1 -w1 ${a}
- log_test_addr ${a} $? 2 "ping out, VRF bind"
+ log_test_addr ${a} $? 1 "ping out, VRF bind"
done
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
--
2.33.0
From: Johannes Berg <[email protected]>
commit db7205af049d230e7e0abf61c1e74c1aab40f390 upstream.
Mark TXQs as having seen transmit while they were stopped if
we bail out of drv_wake_tx_queue() due to reconfig, so that
the queue wake after this will make them catch up. This is
particularly necessary for when TXQs are used for management
packets since those TXQs won't see a lot of traffic that'd
make them catch up later.
Cc: [email protected]
Fixes: 4856bfd23098 ("mac80211: do not call driver wake_tx_queue op during reconfig")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.4573a221c0e1.I0d1d5daea3089be3fc0dccc92991b0f8c5677f0c@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/driver-ops.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1202,8 +1202,11 @@ static inline void drv_wake_tx_queue(str
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(txq->txq.vif);
- if (local->in_reconfig)
+ /* In reconfig don't transmit now, but mark for waking later */
+ if (local->in_reconfig) {
+ set_bit(IEEE80211_TXQ_STOP_NETIF_TX, &txq->flags);
return;
+ }
if (!check_sdata_in_driver(sdata))
return;
From: Eric Dumazet <[email protected]>
[ Upstream commit 71ddeac8cd1d217744a0e060ff520e147c9328d1 ]
KMSAN reported a kernel-infoleak [1], that can exploited
by unpriv users.
After analysis it turned out UDP was not initializing
r->idiag_expires. Other users of inet_sk_diag_fill()
might make the same mistake in the future, so fix this
in inet_sk_diag_fill().
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:156 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:156 [inline]
_copy_to_iter+0x69d/0x25c0 lib/iov_iter.c:670
copy_to_iter include/linux/uio.h:155 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2cb/0x1280 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3657 [inline]
netlink_recvmsg+0x660/0x1c60 net/netlink/af_netlink.c:1974
sock_recvmsg_nosec net/socket.c:944 [inline]
sock_recvmsg net/socket.c:962 [inline]
sock_read_iter+0x5a9/0x630 net/socket.c:1035
call_read_iter include/linux/fs.h:2156 [inline]
new_sync_read fs/read_write.c:400 [inline]
vfs_read+0x1631/0x1980 fs/read_write.c:481
ksys_read+0x28c/0x520 fs/read_write.c:619
__do_sys_read fs/read_write.c:629 [inline]
__se_sys_read fs/read_write.c:627 [inline]
__x64_sys_read+0xdb/0x120 fs/read_write.c:627
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
netlink_dump+0x3d5/0x16a0 net/netlink/af_netlink.c:2245
__netlink_dump_start+0xd1c/0xee0 net/netlink/af_netlink.c:2370
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1343
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x447/0x800 net/netlink/af_netlink.c:2491
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:276
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x1095/0x1360 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x16f3/0x1870 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1057
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x63f/0xe30 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bytes 68-71 of 312 are uninitialized
Memory access of size 312 starts at ffff88812ab54000
Data copied to user address 0000000020001440
CPU: 1 PID: 6365 Comm: syz-executor801 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 3c4d05c80567 ("inet_diag: Introduce the inet socket dumping routine")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/inet_diag.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 6f8118b29ba51..f8f79672cc5f3 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -200,6 +200,7 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
r->idiag_state = sk->sk_state;
r->idiag_timer = 0;
r->idiag_retrans = 0;
+ r->idiag_expires = 0;
if (inet_diag_msg_attrs_fill(sk, skb, r, ext, user_ns, net_admin))
goto errout;
@@ -251,9 +252,6 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
r->idiag_retrans = icsk->icsk_probes_out;
r->idiag_expires =
jiffies_delta_to_msecs(sk->sk_timer.expires - jiffies);
- } else {
- r->idiag_timer = 0;
- r->idiag_expires = 0;
}
if ((ext & (1 << (INET_DIAG_INFO - 1))) && handler->idiag_info_size) {
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit 3828a93f5cfdf5d8a4ff9dead741e9a2871ff57b ]
Use jiffies_delta_to_msecs() to avoid reporting 'infinite'
timeouts and to cleanup code.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/inet_diag.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 4f71aca156662..6f8118b29ba51 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -240,17 +240,17 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
r->idiag_timer = 1;
r->idiag_retrans = icsk->icsk_retransmits;
r->idiag_expires =
- jiffies_to_msecs(icsk->icsk_timeout - jiffies);
+ jiffies_delta_to_msecs(icsk->icsk_timeout - jiffies);
} else if (icsk->icsk_pending == ICSK_TIME_PROBE0) {
r->idiag_timer = 4;
r->idiag_retrans = icsk->icsk_probes_out;
r->idiag_expires =
- jiffies_to_msecs(icsk->icsk_timeout - jiffies);
+ jiffies_delta_to_msecs(icsk->icsk_timeout - jiffies);
} else if (timer_pending(&sk->sk_timer)) {
r->idiag_timer = 2;
r->idiag_retrans = icsk->icsk_probes_out;
r->idiag_expires =
- jiffies_to_msecs(sk->sk_timer.expires - jiffies);
+ jiffies_delta_to_msecs(sk->sk_timer.expires - jiffies);
} else {
r->idiag_timer = 0;
r->idiag_expires = 0;
@@ -338,16 +338,13 @@ static int inet_twsk_diag_fill(struct sock *sk,
r = nlmsg_data(nlh);
BUG_ON(tw->tw_state != TCP_TIME_WAIT);
- tmo = tw->tw_timer.expires - jiffies;
- if (tmo < 0)
- tmo = 0;
-
inet_diag_msg_common_fill(r, sk);
r->idiag_retrans = 0;
r->idiag_state = tw->tw_substate;
r->idiag_timer = 3;
- r->idiag_expires = jiffies_to_msecs(tmo);
+ tmo = tw->tw_timer.expires - jiffies;
+ r->idiag_expires = jiffies_delta_to_msecs(tmo);
r->idiag_rqueue = 0;
r->idiag_wqueue = 0;
r->idiag_uid = 0;
@@ -381,7 +378,7 @@ static int inet_req_diag_fill(struct sock *sk, struct sk_buff *skb,
offsetof(struct sock, sk_cookie));
tmo = inet_reqsk(sk)->rsk_timer.expires - jiffies;
- r->idiag_expires = (tmo >= 0) ? jiffies_to_msecs(tmo) : 0;
+ r->idiag_expires = jiffies_delta_to_msecs(tmo);
r->idiag_rqueue = 0;
r->idiag_wqueue = 0;
r->idiag_uid = 0;
--
2.33.0
From: Sudeep Holla <[email protected]>
commit 865ed67ab955428b9aa771d8b4f1e4fb7fd08945 upstream.
Without the bound checks for scpi_pd->name, it could result in the buffer
overflow when copying the SCPI device name from the corresponding device
tree node as the name string is set at maximum size of 30.
Let us fix it by using devm_kasprintf so that the string buffer is
allocated dynamically.
Fixes: 8bec4337ad40 ("firmware: scpi: add device power domain support using genpd")
Reported-by: Pedro Batista <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
Cc: [email protected]
Cc: Cristian Marussi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/scpi_pm_domain.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/firmware/scpi_pm_domain.c
+++ b/drivers/firmware/scpi_pm_domain.c
@@ -16,7 +16,6 @@ struct scpi_pm_domain {
struct generic_pm_domain genpd;
struct scpi_ops *ops;
u32 domain;
- char name[30];
};
/*
@@ -110,8 +109,13 @@ static int scpi_pm_domain_probe(struct p
scpi_pd->domain = i;
scpi_pd->ops = scpi_ops;
- sprintf(scpi_pd->name, "%pOFn.%d", np, i);
- scpi_pd->genpd.name = scpi_pd->name;
+ scpi_pd->genpd.name = devm_kasprintf(dev, GFP_KERNEL,
+ "%pOFn.%d", np, i);
+ if (!scpi_pd->genpd.name) {
+ dev_err(dev, "Failed to allocate genpd name:%pOFn.%d\n",
+ np, i);
+ continue;
+ }
scpi_pd->genpd.power_off = scpi_pd_power_off;
scpi_pd->genpd.power_on = scpi_pd_power_on;
From: Felix Fietkau <[email protected]>
commit 1fe98f5690c4219d419ea9cc190f94b3401cf324 upstream.
Sending them out on a different queue can cause a race condition where a
number of packets in the queue may be discarded by the receiver, because
the ADDBA request is sent too early.
This affects any driver with software A-MPDU setup which does not allocate
packet seqno in hardware on tx, regardless of whether iTXQ is used or not.
The only driver I've seen that explicitly deals with this issue internally
is mwl8k.
Cc: [email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/agg-tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -106,7 +106,7 @@ static void ieee80211_send_addba_request
mgmt->u.action.u.addba_req.start_seq_num =
cpu_to_le16(start_seq_num << 4);
- ieee80211_tx_skb(sdata, skb);
+ ieee80211_tx_skb_tid(sdata, skb, tid);
}
void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)
From: Letu Ren <[email protected]>
[ Upstream commit b6d335a60dc624c0d279333b22c737faa765b028 ]
In `igbvf_probe`, if register_netdev() fails, the program will go to
label err_hw_init, and then to label err_ioremap. In free_netdev() which
is just below label err_ioremap, there is `list_for_each_entry_safe` and
`netif_napi_del` which aims to delete all entries in `dev->napi_list`.
The program has added an entry `adapter->rx_ring->napi` which is added by
`netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has
been freed below label err_hw_init. So this a UAF.
In terms of how to patch the problem, we can refer to igbvf_remove() and
delete the entry before `adapter->rx_ring`.
The KASAN logs are as follows:
[ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450
[ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366
[ 35.128360]
[ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14
[ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 35.131749] Call Trace:
[ 35.132199] dump_stack_lvl+0x59/0x7b
[ 35.132865] print_address_description+0x7c/0x3b0
[ 35.133707] ? free_netdev+0x1fd/0x450
[ 35.134378] __kasan_report+0x160/0x1c0
[ 35.135063] ? free_netdev+0x1fd/0x450
[ 35.135738] kasan_report+0x4b/0x70
[ 35.136367] free_netdev+0x1fd/0x450
[ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf]
[ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf]
[ 35.138751] local_pci_probe+0x13c/0x1f0
[ 35.139461] pci_device_probe+0x37e/0x6c0
[ 35.165526]
[ 35.165806] Allocated by task 366:
[ 35.166414] ____kasan_kmalloc+0xc4/0xf0
[ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf]
[ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf]
[ 35.168866] local_pci_probe+0x13c/0x1f0
[ 35.169565] pci_device_probe+0x37e/0x6c0
[ 35.179713]
[ 35.179993] Freed by task 366:
[ 35.180539] kasan_set_track+0x4c/0x80
[ 35.181211] kasan_set_free_info+0x1f/0x40
[ 35.181942] ____kasan_slab_free+0x103/0x140
[ 35.182703] kfree+0xe3/0x250
[ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf]
[ 35.184040] local_pci_probe+0x13c/0x1f0
Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions)
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Letu Ren <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igbvf/netdev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 77cb2ab7dab40..1082e49ea0560 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -2887,6 +2887,7 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
err_hw_init:
+ netif_napi_del(&adapter->rx_ring->napi);
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
err_sw_init:
--
2.33.0
From: Cyril Novikov <[email protected]>
[ Upstream commit bf0a375055bd1afbbf02a0ef45f7655da7b71317 ]
The MDIO bus speed must be initialized before talking to the PHY the first
time in order to avoid talking to it using a speed that the PHY doesn't
support.
This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on
Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network
plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined
with the 10Gb network results in a 24MHz MDIO speed, which is apparently
too fast for the connected PHY. PHY register reads over MDIO bus return
garbage, leading to initialization failure.
Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using
the following setup:
* Use an Atom C3000 family system with at least one X552 LAN on the SoC
* Disable PXE or other BIOS network initialization if possible
(the interface must not be initialized before Linux boots)
* Connect a live 10Gb Ethernet cable to an X550 port
* Power cycle (not reset, doesn't always work) the system and boot Linux
* Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17
Fixes: e84db7272798 ("ixgbe: Introduce function to control MDIO speed")
Signed-off-by: Cyril Novikov <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 9c42f741ed5ef..74728c0a44a81 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -3405,6 +3405,9 @@ static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
/* flush pending Tx transactions */
ixgbe_clear_tx_pending(hw);
+ /* set MDIO speed before talking to the PHY in case it's the 1st time */
+ ixgbe_set_mdio_speed(hw);
+
/* PHY ops must be identified and initialized prior to reset */
status = hw->phy.ops.init(hw);
if (status == IXGBE_ERR_SFP_NOT_SUPPORTED ||
--
2.33.0
From: Jimmy Wang <[email protected]>
commit 0ad3bd562bb91853b9f42bda145b5db6255aee90 upstream.
This device doesn't work well with LPM, losing connectivity intermittently.
Disable LPM to resolve the issue.
Reviewed-by: <[email protected]>
Signed-off-by: Jimmy Wang <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -435,6 +435,9 @@ static const struct usb_device_id usb_qu
{ USB_DEVICE(0x1532, 0x0116), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+ /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */
+ { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM },
+
/* Lenovo Powered USB-C Travel Hub (4X90S92381, RTL8153 GigE) */
{ USB_DEVICE(0x17ef, 0x721e), .driver_info = USB_QUIRK_NO_LPM },
From: Fabrice Gasnier <[email protected]>
commit f711f28e71e965c0d1141c830fa7131b41abbe75 upstream.
Some I/Os are connected to ADC input channels, when the corresponding bit
in PCSEL register are set on STM32H7 and STM32MP15. This is done in the
prepare routine of stm32-adc driver.
There are constraints here, as PCSEL shouldn't be set when VDDA supply
is disabled. Enabling/disabling of VDDA supply in done via stm32-adc-core
runtime PM routines (before/after ADC is enabled/disabled).
Currently, PCSEL remains set when disabling ADC. Later on, PM runtime
can disable the VDDA supply. This creates some conditions on I/Os that
can start to leak current.
So PCSEL needs to be cleared when disabling the ADC.
Fixes: 95e339b6e85d ("iio: adc: stm32: add support for STM32H7")
Signed-off-by: Fabrice Gasnier <[email protected]>
Reviewed-by: Olivier Moysan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/stm32-adc.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -933,6 +933,7 @@ pwr_dwn:
static void stm32h7_adc_unprepare(struct stm32_adc *adc)
{
+ stm32_adc_writel(adc, STM32H7_ADC_PCSEL, 0);
stm32h7_adc_disable(adc);
stm32h7_adc_enter_pwr_down(adc);
}
From: Mordechay Goodstein <[email protected]>
[ Upstream commit 31d8bb4e07f80935ee9bf599a9d99de7ca90fc5a ]
We move the actual arming the timer and sending ADDBA to a function
for the use in different places calling the same logic.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200326150855.58a337eb90a1.I75934e6464535fbf43969acc796bc886291e79a5@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/agg-tx.c | 67 +++++++++++++++++++++++++------------------
1 file changed, 39 insertions(+), 28 deletions(-)
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 3d2af1851bdf9..1a5768ae5f515 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -9,7 +9,7 @@
* Copyright 2007, Michael Wu <[email protected]>
* Copyright 2007-2010, Intel Corporation
* Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2019 Intel Corporation
+ * Copyright (C) 2018 - 2020 Intel Corporation
*/
#include <linux/ieee80211.h>
@@ -448,6 +448,43 @@ static void sta_addba_resp_timer_expired(struct timer_list *t)
ieee80211_stop_tx_ba_session(&sta->sta, tid);
}
+static void ieee80211_send_addba_with_timeout(struct sta_info *sta,
+ struct tid_ampdu_tx *tid_tx)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct ieee80211_local *local = sta->local;
+ u8 tid = tid_tx->tid;
+ u16 buf_size;
+
+ /* activate the timer for the recipient's addBA response */
+ mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
+ ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
+ sta->sta.addr, tid);
+
+ spin_lock_bh(&sta->lock);
+ sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
+ sta->ampdu_mlme.addba_req_num[tid]++;
+ spin_unlock_bh(&sta->lock);
+
+ if (sta->sta.he_cap.has_he) {
+ buf_size = local->hw.max_tx_aggregation_subframes;
+ } else {
+ /*
+ * We really should use what the driver told us it will
+ * transmit as the maximum, but certain APs (e.g. the
+ * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
+ * will crash when we use a lower number.
+ */
+ buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
+ }
+
+ /* send AddBA request */
+ ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
+ tid_tx->dialog_token,
+ sta->tid_seq[tid] >> 4,
+ buf_size, tid_tx->timeout);
+}
+
void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
{
struct tid_ampdu_tx *tid_tx;
@@ -462,7 +499,6 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
.timeout = 0,
};
int ret;
- u16 buf_size;
tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
@@ -501,32 +537,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
return;
}
- /* activate the timer for the recipient's addBA response */
- mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
- ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
- sta->sta.addr, tid);
-
- spin_lock_bh(&sta->lock);
- sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
- sta->ampdu_mlme.addba_req_num[tid]++;
- spin_unlock_bh(&sta->lock);
-
- if (sta->sta.he_cap.has_he) {
- buf_size = local->hw.max_tx_aggregation_subframes;
- } else {
- /*
- * We really should use what the driver told us it will
- * transmit as the maximum, but certain APs (e.g. the
- * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
- * will crash when we use a lower number.
- */
- buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
- }
-
- /* send AddBA request */
- ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
- tid_tx->dialog_token, params.ssn,
- buf_size, tid_tx->timeout);
+ ieee80211_send_addba_with_timeout(sta, tid_tx);
}
/*
--
2.33.0
From: Nathan Chancellor <[email protected]>
commit 6a953dc4dbd1c7057fb765a24f37a5e953c85fb0 upstream.
A new warning in clang points out when macro expansion might result in a
GNU C statement expression. There is an instance of this in the mwifiex
driver:
drivers/net/wireless/marvell/mwifiex/cmdevt.c:217:34: warning: '}' and
')' tokens terminating statement expression appear in different macro
expansion contexts [-Wcompound-token-split-by-macro]
host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex/fw.h:519:46: note: expanded from
macro 'HostCmd_SET_SEQ_NO_BSS_INFO'
(((type) & 0x000f) << 12); }
^
This does not appear to be a real issue. Removing the braces and
replacing them with parentheses will fix the warning and not change the
meaning of the code.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1146
Reported-by: Andy Lavr <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/cmdevt.c | 4 ++--
drivers/net/wireless/marvell/mwifiex/fw.h | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/net/wireless/marvell/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/marvell/mwifiex/cmdevt.c
@@ -322,9 +322,9 @@ static int mwifiex_dnld_sleep_confirm_cm
adapter->seq_num++;
sleep_cfm_buf->seq_num =
- cpu_to_le16((HostCmd_SET_SEQ_NO_BSS_INFO
+ cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
(adapter->seq_num, priv->bss_num,
- priv->bss_type)));
+ priv->bss_type));
mwifiex_dbg(adapter, CMD,
"cmd: DNLD_CMD: %#x, act %#x, len %d, seqno %#x\n",
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -512,10 +512,10 @@ enum mwifiex_channel_flags {
#define RF_ANTENNA_AUTO 0xFFFF
-#define HostCmd_SET_SEQ_NO_BSS_INFO(seq, num, type) { \
- (((seq) & 0x00ff) | \
- (((num) & 0x000f) << 8)) | \
- (((type) & 0x000f) << 12); }
+#define HostCmd_SET_SEQ_NO_BSS_INFO(seq, num, type) \
+ ((((seq) & 0x00ff) | \
+ (((num) & 0x000f) << 8)) | \
+ (((type) & 0x000f) << 12))
#define HostCmd_GET_SEQ_NO(seq) \
((seq) & HostCmd_SEQ_NUM_MASK)
From: George Kennedy <[email protected]>
commit 5da5231bb47864e5dd6c6731151e98b6ee498827 upstream.
Avoid data corruption by rejecting pass-through commands where
T_LENGTH is zero (No data is transferred) and the dma direction
is not DMA_NONE.
Cc: <[email protected]>
Reported-by: syzkaller<[email protected]>
Signed-off-by: George Kennedy<[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-scsi.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3164,8 +3164,19 @@ static unsigned int ata_scsi_pass_thru(s
goto invalid_fld;
}
- if (ata_is_ncq(tf->protocol) && (cdb[2 + cdb_offset] & 0x3) == 0)
- tf->protocol = ATA_PROT_NCQ_NODATA;
+ if ((cdb[2 + cdb_offset] & 0x3) == 0) {
+ /*
+ * When T_LENGTH is zero (No data is transferred), dir should
+ * be DMA_NONE.
+ */
+ if (scmd->sc_data_direction != DMA_NONE) {
+ fp = 2 + cdb_offset;
+ goto invalid_fld;
+ }
+
+ if (ata_is_ncq(tf->protocol))
+ tf->protocol = ATA_PROT_NCQ_NODATA;
+ }
/* enable LBA */
tf->flags |= ATA_TFLAG_LBA;
From: Daniele Palmas <[email protected]>
commit 2b503c8598d1b232e7fc7526bce9326d92331541 upstream.
Add the following Telit FN990 compositions:
0x1070: tty, adb, rmnet, tty, tty, tty, tty
0x1071: tty, adb, mbim, tty, tty, tty, tty
0x1072: rndis, tty, adb, tty, tty, tty, tty
0x1073: tty, adb, ecm, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1219,6 +1219,14 @@ static const struct usb_device_id option
.driver_info = NCTRL(2) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1063, 0xff), /* Telit LN920 (ECM) */
.driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1070, 0xff), /* Telit FN990 (rmnet) */
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1071, 0xff), /* Telit FN990 (MBIM) */
+ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1072, 0xff), /* Telit FN990 (RNDIS) */
+ .driver_info = NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990 (ECM) */
+ .driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
From: Johannes Berg <[email protected]>
[ Upstream commit 93382a0d119b3ab95e3ebca51ea15aa87187b493 ]
On 6 GHz, stations don't have ht_supported set, but they can
still do aggregation since they must have HE, allow that.
Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/agg-rx.c | 5 +++--
net/mac80211/agg-tx.c | 3 ++-
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 4d1c335e06e57..7f245e9f114c2 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -9,7 +9,7 @@
* Copyright 2007, Michael Wu <[email protected]>
* Copyright 2007-2010, Intel Corporation
* Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 Intel Corporation
+ * Copyright (C) 2018-2020 Intel Corporation
*/
/**
@@ -292,7 +292,8 @@ void ___ieee80211_start_rx_ba_session(struct sta_info *sta,
goto end;
}
- if (!sta->sta.ht_cap.ht_supported) {
+ if (!sta->sta.ht_cap.ht_supported &&
+ sta->sdata->vif.bss_conf.chandef.chan->band != NL80211_BAND_6GHZ) {
ht_dbg(sta->sdata,
"STA %pM erroneously requests BA session on tid %d w/o QoS\n",
sta->sta.addr, tid);
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index d801ceb2ed7fa..8d3b905e551a3 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -583,7 +583,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
"Requested to start BA session on reserved tid=%d", tid))
return -EINVAL;
- if (!pubsta->ht_cap.ht_supported)
+ if (!pubsta->ht_cap.ht_supported &&
+ sta->sdata->vif.bss_conf.chandef.chan->band != NL80211_BAND_6GHZ)
return -EINVAL;
if (WARN_ON_ONCE(!local->ops->ampdu_action))
--
2.33.0
From: Magnus Karlsson <[email protected]>
commit bd0687c18e635b63233dc87f38058cd728802ab4 upstream.
Do not sleep in poll() when the need_wakeup flag is set. When this
flag is set, the application needs to explicitly wake up the driver
with a syscall (poll, recvmsg, sendmsg, etc.) to guarantee that Rx
and/or Tx processing will be processed promptly. But the current code
in poll(), sleeps first then wakes up the driver. This means that no
driver processing will occur (baring any interrupts) until the timeout
has expired.
Fix this by checking the need_wakeup flag first and if set, wake the
driver and return to the application. Only if need_wakeup is not set
should the process sleep if there is a timeout set in the poll() call.
Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings")
Reported-by: Keith Wiles <[email protected]>
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xdp/xsk.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -434,8 +434,6 @@ static __poll_t xsk_poll(struct file *fi
struct xdp_sock *xs = xdp_sk(sk);
struct xdp_umem *umem;
- sock_poll_wait(file, sock, wait);
-
if (unlikely(!xsk_is_bound(xs)))
return mask;
@@ -447,6 +445,8 @@ static __poll_t xsk_poll(struct file *fi
else
/* Poll needs to drive Tx also in copy mode */
__xsk_sendmsg(sk);
+ } else {
+ sock_poll_wait(file, sock, wait);
}
if (xs->rx && !xskq_empty_desc(xs->rx))
From: Pavel Skripkin <[email protected]>
commit 44870a9e7a3c24acbb3f888b2a7cc22c9bdf7e7f upstream.
Syzbot reported, that mxl111sf_ctrl_msg() uses uninitialized
mutex. The problem was in wrong mutex_init() location.
Previous mutex_init(&state->msg_lock) call was in ->init() function, but
dvb_usbv2_init() has this order of calls:
dvb_usbv2_init()
dvb_usbv2_adapter_init()
dvb_usbv2_adapter_frontend_init()
props->frontend_attach()
props->init()
Since mxl111sf_* devices call mxl111sf_ctrl_msg() in ->frontend_attach()
internally we need to initialize state->msg_lock before
frontend_attach(). To achieve it, ->probe() call added to all mxl111sf_*
devices, which will simply initiaize mutex.
Reported-and-tested-by: [email protected]
Fixes: 8572211842af ("[media] mxl111sf: convert to new DVB USB")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb-v2/mxl111sf.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -931,8 +931,6 @@ static int mxl111sf_init(struct dvb_usb_
.len = sizeof(eeprom), .buf = eeprom },
};
- mutex_init(&state->msg_lock);
-
ret = get_chip_info(state);
if (mxl_fail(ret))
pr_err("failed to get chip info during probe");
@@ -1074,6 +1072,14 @@ static int mxl111sf_get_stream_config_dv
return 0;
}
+static int mxl111sf_probe(struct dvb_usb_device *dev)
+{
+ struct mxl111sf_state *state = d_to_priv(dev);
+
+ mutex_init(&state->msg_lock);
+ return 0;
+}
+
static struct dvb_usb_device_properties mxl111sf_props_dvbt = {
.driver_name = KBUILD_MODNAME,
.owner = THIS_MODULE,
@@ -1083,6 +1089,7 @@ static struct dvb_usb_device_properties
.generic_bulk_ctrl_endpoint = 0x02,
.generic_bulk_ctrl_endpoint_response = 0x81,
+ .probe = mxl111sf_probe,
.i2c_algo = &mxl111sf_i2c_algo,
.frontend_attach = mxl111sf_frontend_attach_dvbt,
.tuner_attach = mxl111sf_attach_tuner,
@@ -1124,6 +1131,7 @@ static struct dvb_usb_device_properties
.generic_bulk_ctrl_endpoint = 0x02,
.generic_bulk_ctrl_endpoint_response = 0x81,
+ .probe = mxl111sf_probe,
.i2c_algo = &mxl111sf_i2c_algo,
.frontend_attach = mxl111sf_frontend_attach_atsc,
.tuner_attach = mxl111sf_attach_tuner,
@@ -1165,6 +1173,7 @@ static struct dvb_usb_device_properties
.generic_bulk_ctrl_endpoint = 0x02,
.generic_bulk_ctrl_endpoint_response = 0x81,
+ .probe = mxl111sf_probe,
.i2c_algo = &mxl111sf_i2c_algo,
.frontend_attach = mxl111sf_frontend_attach_mh,
.tuner_attach = mxl111sf_attach_tuner,
@@ -1233,6 +1242,7 @@ static struct dvb_usb_device_properties
.generic_bulk_ctrl_endpoint = 0x02,
.generic_bulk_ctrl_endpoint_response = 0x81,
+ .probe = mxl111sf_probe,
.i2c_algo = &mxl111sf_i2c_algo,
.frontend_attach = mxl111sf_frontend_attach_atsc_mh,
.tuner_attach = mxl111sf_attach_tuner,
@@ -1311,6 +1321,7 @@ static struct dvb_usb_device_properties
.generic_bulk_ctrl_endpoint = 0x02,
.generic_bulk_ctrl_endpoint_response = 0x81,
+ .probe = mxl111sf_probe,
.i2c_algo = &mxl111sf_i2c_algo,
.frontend_attach = mxl111sf_frontend_attach_mercury,
.tuner_attach = mxl111sf_attach_tuner,
@@ -1381,6 +1392,7 @@ static struct dvb_usb_device_properties
.generic_bulk_ctrl_endpoint = 0x02,
.generic_bulk_ctrl_endpoint_response = 0x81,
+ .probe = mxl111sf_probe,
.i2c_algo = &mxl111sf_i2c_algo,
.frontend_attach = mxl111sf_frontend_attach_mercury_mh,
.tuner_attach = mxl111sf_attach_tuner,
From: Miklos Szeredi <[email protected]>
commit bda9a71980e083699a0360963c0135657b73f47a upstream.
Add missing inode lock annotatation; found by syzbot.
Reported-and-tested-by: [email protected]
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dir.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1032,7 +1032,7 @@ int fuse_reverse_inval_entry(struct supe
if (!parent)
return -ENOENT;
- inode_lock(parent);
+ inode_lock_nested(parent, I_MUTEX_PARENT);
if (!S_ISDIR(parent->i_mode))
goto unlock;
From: Hangyu Hua <[email protected]>
[ Upstream commit 5f9562ebe710c307adc5f666bf1a2162ee7977c0 ]
__rds_conn_create() did not release conn->c_path when loop_trans != 0 and
trans->t_prefer_loopback != 0 and is_outgoing == 0.
Fixes: aced3ce57cd3 ("RDS tcp loopback connection can hang")
Signed-off-by: Hangyu Hua <[email protected]>
Reviewed-by: Sharath Srinivasan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/rds/connection.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/rds/connection.c b/net/rds/connection.c
index c85bd6340eaa7..92ff40e7a66cf 100644
--- a/net/rds/connection.c
+++ b/net/rds/connection.c
@@ -253,6 +253,7 @@ static struct rds_connection *__rds_conn_create(struct net *net,
* should end up here, but if it
* does, reset/destroy the connection.
*/
+ kfree(conn->c_path);
kmem_cache_free(rds_conn_slab, conn);
conn = ERR_PTR(-EOPNOTSUPP);
goto out;
--
2.33.0
From: Karen Sornek <[email protected]>
[ Upstream commit 584af82154f56e6b2740160fcc84a2966d969e15 ]
Move checking condition of VF MAC filter before clearing
or adding MAC filter to VF to prevent potential blackout caused
by removal of necessary and working VF's MAC filter.
Fixes: 1b8b062a99dc ("igb: add VF trust infrastructure")
Signed-off-by: Karen Sornek <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/igb_main.c | 28 +++++++++++------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c11244a9b7e69..3df25b231ab5c 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7374,6 +7374,20 @@ static int igb_set_vf_mac_filter(struct igb_adapter *adapter, const int vf,
struct vf_mac_filter *entry = NULL;
int ret = 0;
+ if ((vf_data->flags & IGB_VF_FLAG_PF_SET_MAC) &&
+ !vf_data->trusted) {
+ dev_warn(&pdev->dev,
+ "VF %d requested MAC filter but is administratively denied\n",
+ vf);
+ return -EINVAL;
+ }
+ if (!is_valid_ether_addr(addr)) {
+ dev_warn(&pdev->dev,
+ "VF %d attempted to set invalid MAC filter\n",
+ vf);
+ return -EINVAL;
+ }
+
switch (info) {
case E1000_VF_MAC_FILTER_CLR:
/* remove all unicast MAC filters related to the current VF */
@@ -7387,20 +7401,6 @@ static int igb_set_vf_mac_filter(struct igb_adapter *adapter, const int vf,
}
break;
case E1000_VF_MAC_FILTER_ADD:
- if ((vf_data->flags & IGB_VF_FLAG_PF_SET_MAC) &&
- !vf_data->trusted) {
- dev_warn(&pdev->dev,
- "VF %d requested MAC filter but is administratively denied\n",
- vf);
- return -EINVAL;
- }
- if (!is_valid_ether_addr(addr)) {
- dev_warn(&pdev->dev,
- "VF %d attempted to set invalid MAC filter\n",
- vf);
- return -EINVAL;
- }
-
/* try to find empty slot in the list */
list_for_each(pos, &adapter->vf_macs.l) {
entry = list_entry(pos, struct vf_mac_filter, l);
--
2.33.0
From: Felix Fietkau <[email protected]>
commit 73111efacd3c6d9e644acca1d132566932be8af0 upstream.
Some drivers that do their own sequence number allocation (e.g. ath9k) rely
on being able to modify params->ssn on starting tx ampdu sessions.
This was broken by a change that modified it to use sta->tid_seq[tid] instead.
Cc: [email protected]
Fixes: 31d8bb4e07f8 ("mac80211: agg-tx: refactor sending addba")
Reported-by: Eneas U de Queiroz <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/agg-tx.c | 4 ++--
net/mac80211/sta_info.h | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -481,8 +481,7 @@ static void ieee80211_send_addba_with_ti
/* send AddBA request */
ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
- tid_tx->dialog_token,
- sta->tid_seq[tid] >> 4,
+ tid_tx->dialog_token, tid_tx->ssn,
buf_size, tid_tx->timeout);
}
@@ -522,6 +521,7 @@ void ieee80211_tx_ba_session_handle_star
params.ssn = sta->tid_seq[tid] >> 4;
ret = drv_ampdu_action(local, sdata, ¶ms);
+ tid_tx->ssn = params.ssn;
if (ret) {
ht_dbg(sdata,
"BA request denied - HW unavailable for %pM tid %d\n",
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -180,6 +180,7 @@ struct tid_ampdu_tx {
u8 stop_initiator;
bool tx_stop;
u16 buf_size;
+ u16 ssn;
u16 failed_bar_ssn;
bool bar_pending;
From: Magnus Karlsson <[email protected]>
commit 0706a78f31c4217ca144f630063ec9561a21548d upstream.
This reverts commit bd0687c18e635b63233dc87f38058cd728802ab4.
This patch causes a Tx only workload to go to sleep even when it does
not have to, leading to misserable performance in skb mode. It fixed
one rare problem but created a much worse one, so this need to be
reverted while I try to craft a proper solution to the original
problem.
Fixes: bd0687c18e63 ("xsk: Do not sleep in poll() when need_wakeup set")
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xdp/xsk.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -434,6 +434,8 @@ static __poll_t xsk_poll(struct file *fi
struct xdp_sock *xs = xdp_sk(sk);
struct xdp_umem *umem;
+ sock_poll_wait(file, sock, wait);
+
if (unlikely(!xsk_is_bound(xs)))
return mask;
@@ -445,8 +447,6 @@ static __poll_t xsk_poll(struct file *fi
else
/* Poll needs to drive Tx also in copy mode */
__xsk_sendmsg(sk);
- } else {
- sock_poll_wait(file, sock, wait);
}
if (xs->rx && !xskq_empty_desc(xs->rx))
From: Juergen Gross <[email protected]>
commit fe415186b43df0db1f17fa3a46275fd92107fe71 upstream.
The Xen console driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using a lateeoi event
channel.
For the normal domU initial console this requires the introduction of
bind_evtchn_to_irq_lateeoi() as there is no xenbus device available
at the time the event channel is bound to the irq.
As the decision whether an interrupt was spurious or not requires to
test for bytes having been read from the backend, move sending the
event into the if statement, as sending an event without having found
any bytes to be read is making no sense at all.
This is part of XSA-391
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/hvc/hvc_xen.c | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -37,6 +37,8 @@ struct xencons_info {
struct xenbus_device *xbdev;
struct xencons_interface *intf;
unsigned int evtchn;
+ XENCONS_RING_IDX out_cons;
+ unsigned int out_cons_same;
struct hvc_struct *hvc;
int irq;
int vtermno;
@@ -138,6 +140,8 @@ static int domU_read_console(uint32_t vt
XENCONS_RING_IDX cons, prod;
int recv = 0;
struct xencons_info *xencons = vtermno_to_xencons(vtermno);
+ unsigned int eoiflag = 0;
+
if (xencons == NULL)
return -EINVAL;
intf = xencons->intf;
@@ -157,7 +161,27 @@ static int domU_read_console(uint32_t vt
mb(); /* read ring before consuming */
intf->in_cons = cons;
- notify_daemon(xencons);
+ /*
+ * When to mark interrupt having been spurious:
+ * - there was no new data to be read, and
+ * - the backend did not consume some output bytes, and
+ * - the previous round with no read data didn't see consumed bytes
+ * (we might have a race with an interrupt being in flight while
+ * updating xencons->out_cons, so account for that by allowing one
+ * round without any visible reason)
+ */
+ if (intf->out_cons != xencons->out_cons) {
+ xencons->out_cons = intf->out_cons;
+ xencons->out_cons_same = 0;
+ }
+ if (recv) {
+ notify_daemon(xencons);
+ } else if (xencons->out_cons_same++ > 1) {
+ eoiflag = XEN_EOI_FLAG_SPURIOUS;
+ }
+
+ xen_irq_lateeoi(xencons->irq, eoiflag);
+
return recv;
}
@@ -386,7 +410,7 @@ static int xencons_connect_backend(struc
if (ret)
return ret;
info->evtchn = evtchn;
- irq = bind_evtchn_to_irq(evtchn);
+ irq = bind_interdomain_evtchn_to_irq_lateeoi(dev->otherend_id, evtchn);
if (irq < 0)
return irq;
info->irq = irq;
@@ -550,7 +574,7 @@ static int __init xen_hvc_init(void)
return r;
info = vtermno_to_xencons(HVC_COOKIE);
- info->irq = bind_evtchn_to_irq(info->evtchn);
+ info->irq = bind_evtchn_to_irq_lateeoi(info->evtchn);
}
if (info->irq < 0)
info->irq = 0; /* NO_IRQ */
From: Juergen Gross <[email protected]>
commit b27d47950e481f292c0a5ad57357edb9d95d03ba upstream.
The Xen netfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.
For being able to detect the case of no rx responses being added while
the carrier is down a new lock is needed in order to update and test
rsp_cons and the number of seen unconsumed responses atomically.
This is part of XSA-391
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netfront.c | 125 +++++++++++++++++++++++++++++++++------------
1 file changed, 94 insertions(+), 31 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -142,6 +142,9 @@ struct netfront_queue {
struct sk_buff *rx_skbs[NET_RX_RING_SIZE];
grant_ref_t gref_rx_head;
grant_ref_t grant_rx_ref[NET_RX_RING_SIZE];
+
+ unsigned int rx_rsp_unconsumed;
+ spinlock_t rx_cons_lock;
};
struct netfront_info {
@@ -364,12 +367,13 @@ static int xennet_open(struct net_device
return 0;
}
-static void xennet_tx_buf_gc(struct netfront_queue *queue)
+static bool xennet_tx_buf_gc(struct netfront_queue *queue)
{
RING_IDX cons, prod;
unsigned short id;
struct sk_buff *skb;
bool more_to_do;
+ bool work_done = false;
const struct device *dev = &queue->info->netdev->dev;
BUG_ON(!netif_carrier_ok(queue->info->netdev));
@@ -386,6 +390,8 @@ static void xennet_tx_buf_gc(struct netf
for (cons = queue->tx.rsp_cons; cons != prod; cons++) {
struct xen_netif_tx_response txrsp;
+ work_done = true;
+
RING_COPY_RESPONSE(&queue->tx, cons, &txrsp);
if (txrsp.status == XEN_NETIF_RSP_NULL)
continue;
@@ -429,11 +435,13 @@ static void xennet_tx_buf_gc(struct netf
xennet_maybe_wake_tx(queue);
- return;
+ return work_done;
err:
queue->info->broken = true;
dev_alert(dev, "Disabled for further use\n");
+
+ return work_done;
}
struct xennet_gnttab_make_txreq {
@@ -753,6 +761,16 @@ static int xennet_close(struct net_devic
return 0;
}
+static void xennet_set_rx_rsp_cons(struct netfront_queue *queue, RING_IDX val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&queue->rx_cons_lock, flags);
+ queue->rx.rsp_cons = val;
+ queue->rx_rsp_unconsumed = RING_HAS_UNCONSUMED_RESPONSES(&queue->rx);
+ spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
+}
+
static void xennet_move_rx_slot(struct netfront_queue *queue, struct sk_buff *skb,
grant_ref_t ref)
{
@@ -804,7 +822,7 @@ static int xennet_get_extras(struct netf
xennet_move_rx_slot(queue, skb, ref);
} while (extra.flags & XEN_NETIF_EXTRA_FLAG_MORE);
- queue->rx.rsp_cons = cons;
+ xennet_set_rx_rsp_cons(queue, cons);
return err;
}
@@ -884,7 +902,7 @@ next:
}
if (unlikely(err))
- queue->rx.rsp_cons = cons + slots;
+ xennet_set_rx_rsp_cons(queue, cons + slots);
return err;
}
@@ -938,7 +956,8 @@ static int xennet_fill_frags(struct netf
__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
}
if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
- queue->rx.rsp_cons = ++cons + skb_queue_len(list);
+ xennet_set_rx_rsp_cons(queue,
+ ++cons + skb_queue_len(list));
kfree_skb(nskb);
return -ENOENT;
}
@@ -951,7 +970,7 @@ static int xennet_fill_frags(struct netf
kfree_skb(nskb);
}
- queue->rx.rsp_cons = cons;
+ xennet_set_rx_rsp_cons(queue, cons);
return 0;
}
@@ -1072,7 +1091,9 @@ err:
if (unlikely(xennet_set_skb_gso(skb, gso))) {
__skb_queue_head(&tmpq, skb);
- queue->rx.rsp_cons += skb_queue_len(&tmpq);
+ xennet_set_rx_rsp_cons(queue,
+ queue->rx.rsp_cons +
+ skb_queue_len(&tmpq));
goto err;
}
}
@@ -1096,7 +1117,8 @@ err:
__skb_queue_tail(&rxq, skb);
- i = ++queue->rx.rsp_cons;
+ i = queue->rx.rsp_cons + 1;
+ xennet_set_rx_rsp_cons(queue, i);
work_done++;
}
@@ -1258,40 +1280,79 @@ static int xennet_set_features(struct ne
return 0;
}
-static irqreturn_t xennet_tx_interrupt(int irq, void *dev_id)
+static bool xennet_handle_tx(struct netfront_queue *queue, unsigned int *eoi)
{
- struct netfront_queue *queue = dev_id;
unsigned long flags;
- if (queue->info->broken)
- return IRQ_HANDLED;
+ if (unlikely(queue->info->broken))
+ return false;
spin_lock_irqsave(&queue->tx_lock, flags);
- xennet_tx_buf_gc(queue);
+ if (xennet_tx_buf_gc(queue))
+ *eoi = 0;
spin_unlock_irqrestore(&queue->tx_lock, flags);
+ return true;
+}
+
+static irqreturn_t xennet_tx_interrupt(int irq, void *dev_id)
+{
+ unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+ if (likely(xennet_handle_tx(dev_id, &eoiflag)))
+ xen_irq_lateeoi(irq, eoiflag);
+
return IRQ_HANDLED;
}
-static irqreturn_t xennet_rx_interrupt(int irq, void *dev_id)
+static bool xennet_handle_rx(struct netfront_queue *queue, unsigned int *eoi)
{
- struct netfront_queue *queue = dev_id;
- struct net_device *dev = queue->info->netdev;
+ unsigned int work_queued;
+ unsigned long flags;
+
+ if (unlikely(queue->info->broken))
+ return false;
- if (queue->info->broken)
- return IRQ_HANDLED;
+ spin_lock_irqsave(&queue->rx_cons_lock, flags);
+ work_queued = RING_HAS_UNCONSUMED_RESPONSES(&queue->rx);
+ if (work_queued > queue->rx_rsp_unconsumed) {
+ queue->rx_rsp_unconsumed = work_queued;
+ *eoi = 0;
+ } else if (unlikely(work_queued < queue->rx_rsp_unconsumed)) {
+ const struct device *dev = &queue->info->netdev->dev;
+
+ spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
+ dev_alert(dev, "RX producer index going backwards\n");
+ dev_alert(dev, "Disabled for further use\n");
+ queue->info->broken = true;
+ return false;
+ }
+ spin_unlock_irqrestore(&queue->rx_cons_lock, flags);
- if (likely(netif_carrier_ok(dev) &&
- RING_HAS_UNCONSUMED_RESPONSES(&queue->rx)))
+ if (likely(netif_carrier_ok(queue->info->netdev) && work_queued))
napi_schedule(&queue->napi);
+ return true;
+}
+
+static irqreturn_t xennet_rx_interrupt(int irq, void *dev_id)
+{
+ unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+ if (likely(xennet_handle_rx(dev_id, &eoiflag)))
+ xen_irq_lateeoi(irq, eoiflag);
+
return IRQ_HANDLED;
}
static irqreturn_t xennet_interrupt(int irq, void *dev_id)
{
- xennet_tx_interrupt(irq, dev_id);
- xennet_rx_interrupt(irq, dev_id);
+ unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
+
+ if (xennet_handle_tx(dev_id, &eoiflag) &&
+ xennet_handle_rx(dev_id, &eoiflag))
+ xen_irq_lateeoi(irq, eoiflag);
+
return IRQ_HANDLED;
}
@@ -1525,9 +1586,10 @@ static int setup_netfront_single(struct
if (err < 0)
goto fail;
- err = bind_evtchn_to_irqhandler(queue->tx_evtchn,
- xennet_interrupt,
- 0, queue->info->netdev->name, queue);
+ err = bind_evtchn_to_irqhandler_lateeoi(queue->tx_evtchn,
+ xennet_interrupt, 0,
+ queue->info->netdev->name,
+ queue);
if (err < 0)
goto bind_fail;
queue->rx_evtchn = queue->tx_evtchn;
@@ -1555,18 +1617,18 @@ static int setup_netfront_split(struct n
snprintf(queue->tx_irq_name, sizeof(queue->tx_irq_name),
"%s-tx", queue->name);
- err = bind_evtchn_to_irqhandler(queue->tx_evtchn,
- xennet_tx_interrupt,
- 0, queue->tx_irq_name, queue);
+ err = bind_evtchn_to_irqhandler_lateeoi(queue->tx_evtchn,
+ xennet_tx_interrupt, 0,
+ queue->tx_irq_name, queue);
if (err < 0)
goto bind_tx_fail;
queue->tx_irq = err;
snprintf(queue->rx_irq_name, sizeof(queue->rx_irq_name),
"%s-rx", queue->name);
- err = bind_evtchn_to_irqhandler(queue->rx_evtchn,
- xennet_rx_interrupt,
- 0, queue->rx_irq_name, queue);
+ err = bind_evtchn_to_irqhandler_lateeoi(queue->rx_evtchn,
+ xennet_rx_interrupt, 0,
+ queue->rx_irq_name, queue);
if (err < 0)
goto bind_rx_fail;
queue->rx_irq = err;
@@ -1668,6 +1730,7 @@ static int xennet_init_queue(struct netf
spin_lock_init(&queue->tx_lock);
spin_lock_init(&queue->rx_lock);
+ spin_lock_init(&queue->rx_cons_lock);
timer_setup(&queue->rx_refill_timer, rx_refill_timeout, 0);
From: Juergen Gross <[email protected]>
commit 0fd08a34e8e3b67ec9bd8287ac0facf8374b844a upstream.
The Xen blkfront driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using lateeoi event
channels.
This is part of XSA-391
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/xen-blkfront.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1565,9 +1565,12 @@ static irqreturn_t blkif_interrupt(int i
unsigned long flags;
struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)dev_id;
struct blkfront_info *info = rinfo->dev_info;
+ unsigned int eoiflag = XEN_EOI_FLAG_SPURIOUS;
- if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
+ if (unlikely(info->connected != BLKIF_STATE_CONNECTED)) {
+ xen_irq_lateeoi(irq, XEN_EOI_FLAG_SPURIOUS);
return IRQ_HANDLED;
+ }
spin_lock_irqsave(&rinfo->ring_lock, flags);
again:
@@ -1583,6 +1586,8 @@ static irqreturn_t blkif_interrupt(int i
unsigned long id;
unsigned int op;
+ eoiflag = 0;
+
RING_COPY_RESPONSE(&rinfo->ring, i, &bret);
id = bret.id;
@@ -1698,6 +1703,8 @@ static irqreturn_t blkif_interrupt(int i
spin_unlock_irqrestore(&rinfo->ring_lock, flags);
+ xen_irq_lateeoi(irq, eoiflag);
+
return IRQ_HANDLED;
err:
@@ -1705,6 +1712,8 @@ static irqreturn_t blkif_interrupt(int i
spin_unlock_irqrestore(&rinfo->ring_lock, flags);
+ /* No EOI in order to avoid further interrupts. */
+
pr_alert("%s disabled for further use\n", info->gd->disk_name);
return IRQ_HANDLED;
}
@@ -1744,8 +1753,8 @@ static int setup_blkring(struct xenbus_d
if (err)
goto fail;
- err = bind_evtchn_to_irqhandler(rinfo->evtchn, blkif_interrupt, 0,
- "blkif", rinfo);
+ err = bind_evtchn_to_irqhandler_lateeoi(rinfo->evtchn, blkif_interrupt,
+ 0, "blkif", rinfo);
if (err <= 0) {
xenbus_dev_fatal(dev, err,
"bind_evtchn_to_irqhandler failed");
From: Juergen Gross <[email protected]>
commit be81992f9086b230623ae3ebbc85ecee4d00a3d3 upstream.
In case a guest isn't consuming incoming network traffic as fast as it
is coming in, xen-netback is buffering network packages in unlimited
numbers today. This can result in host OOM situations.
Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal
queue and carrier flapping") meant to introduce a mechanism to limit
the amount of buffered data by stopping the Tx queue when reaching the
data limit, but this doesn't work for cases like UDP.
When hitting the limit don't queue further SKBs, but drop them instead.
In order to be able to tell Rx packages have been dropped increment the
rx_dropped statistics counter in this case.
It should be noted that the old solution to continue queueing SKBs had
the additional problem of an overflow of the 32-bit rx_queue_len value
would result in intermittent Tx queue enabling.
This is part of XSA-392
Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping")
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netback/rx.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
--- a/drivers/net/xen-netback/rx.c
+++ b/drivers/net/xen-netback/rx.c
@@ -88,16 +88,19 @@ void xenvif_rx_queue_tail(struct xenvif_
spin_lock_irqsave(&queue->rx_queue.lock, flags);
- if (skb_queue_empty(&queue->rx_queue))
- xenvif_update_needed_slots(queue, skb);
-
- __skb_queue_tail(&queue->rx_queue, skb);
-
- queue->rx_queue_len += skb->len;
- if (queue->rx_queue_len > queue->rx_queue_max) {
+ if (queue->rx_queue_len >= queue->rx_queue_max) {
struct net_device *dev = queue->vif->dev;
netif_tx_stop_queue(netdev_get_tx_queue(dev, queue->id));
+ kfree_skb(skb);
+ queue->vif->dev->stats.rx_dropped++;
+ } else {
+ if (skb_queue_empty(&queue->rx_queue))
+ xenvif_update_needed_slots(queue, skb);
+
+ __skb_queue_tail(&queue->rx_queue, skb);
+
+ queue->rx_queue_len += skb->len;
}
spin_unlock_irqrestore(&queue->rx_queue.lock, flags);
@@ -147,6 +150,7 @@ static void xenvif_rx_queue_drop_expired
break;
xenvif_rx_dequeue(queue);
kfree_skb(skb);
+ queue->vif->dev->stats.rx_dropped++;
}
}
From: Miklos Szeredi <[email protected]>
commit 1f5573cfe7a7056e80a92c7a037a3e69f3a13d1c upstream.
Syzbot triggered the following warning in ovl_workdir_create() ->
ovl_create_real():
if (!err && WARN_ON(!newdentry->d_inode)) {
The reason is that the cgroup2 filesystem returns from mkdir without
instantiating the new dentry.
Weird filesystems such as this will be rejected by overlayfs at a later
stage during setup, but to prevent such a warning, call ovl_mkdir_real()
directly from ovl_workdir_create() and reject this case early.
Reported-and-tested-by: [email protected]
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/overlayfs/dir.c | 3 +--
fs/overlayfs/overlayfs.h | 1 +
fs/overlayfs/super.c | 12 ++++++++----
3 files changed, 10 insertions(+), 6 deletions(-)
--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -113,8 +113,7 @@ kill_whiteout:
goto out;
}
-static int ovl_mkdir_real(struct inode *dir, struct dentry **newdentry,
- umode_t mode)
+int ovl_mkdir_real(struct inode *dir, struct dentry **newdentry, umode_t mode)
{
int err;
struct dentry *d, *dentry = *newdentry;
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -409,6 +409,7 @@ struct ovl_cattr {
#define OVL_CATTR(m) (&(struct ovl_cattr) { .mode = (m) })
+int ovl_mkdir_real(struct inode *dir, struct dentry **newdentry, umode_t mode);
struct dentry *ovl_create_real(struct inode *dir, struct dentry *newdentry,
struct ovl_cattr *attr);
int ovl_cleanup(struct inode *dir, struct dentry *dentry);
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -650,10 +650,14 @@ retry:
goto retry;
}
- work = ovl_create_real(dir, work, OVL_CATTR(attr.ia_mode));
- err = PTR_ERR(work);
- if (IS_ERR(work))
- goto out_err;
+ err = ovl_mkdir_real(dir, &work, attr.ia_mode);
+ if (err)
+ goto out_dput;
+
+ /* Weird filesystem returning with hashed negative (kernfs)? */
+ err = -EINVAL;
+ if (d_really_is_negative(work))
+ goto out_dput;
/*
* Try to remove POSIX ACL xattrs from workdir. We are good if:
On 12/20/2021 6:33 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On 12/20/21 7:33 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On 2021/12/20 22:33, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.4.168-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.168-rc1
Commit: 33e178a54a32352a55125d511c690b8020b4cbd9
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9014
passed: 9014
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9014
passed: 9014
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
Hi Greg,
On Mon, Dec 20, 2021 at 03:33:49PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.2.1 20211214): 65 configs -> no new failure
arm (gcc version 11.2.1 20211214): 107 configs -> no new failure
arm64 (gcc version 11.2.1 20211214): 2 configs -> no failure
x86_64 (gcc version 11.2.1 20211214): 4 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
[1]. https://openqa.qa.codethink.co.uk/tests/534
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
On Mon, 20 Dec 2021 at 20:15, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.168-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.4.168-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 13335f539c375b976ffe3a79116239de6a54645e
* git describe: v5.4.167-72-g13335f539c37
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.167-72-g13335f539c37
## No Test Regressions (compared to v5.4.165-19-g542c7817d093)
## No Test Fixes (compared to v5.4.165-19-g542c7817d093)
## Test result summary
total: 87950, pass: 73810, fail: 632, skip: 12412, xfail: 1096
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 258 total, 254 passed, 4 failed
* arm64: 36 total, 31 passed, 5 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 20 total, 20 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 34 total, 34 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 52 total, 48 passed, 4 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 36 total, 36 passed, 0 failed
## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
On Mon, Dec 20, 2021 at 03:33:49PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.168 release.
> There are 71 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 22 Dec 2021 14:30:09 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 157 pass: 157 fail: 0
Qemu test results:
total: 444 pass: 444 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter