From: Arnd Bergmann <[email protected]>
After a change to linux/module.h, dyndbg.h is now included
indirectly from the decompressor for lz4 support, which in turn
causes a build failure on 32-bit Arm:
In file included from include/linux/module.h:30,
from arch/arm/boot/compressed/../../../../lib/lz4/lz4_decompress.c:39,
from arch/arm/boot/compressed/../../../../lib/decompress_unlz4.c:10,
from arch/arm/boot/compressed/decompress.c:59:
include/linux/dynamic_debug.h: In function 'ddebug_dyndbg_module_param_cb':
include/linux/dynamic_debug.h:307:14: error: implicit declaration of function 'strcmp' [-Werror=implicit-function-declaration]
307 | if (!strcmp(param, "dyndbg")) {
| ^~~~~~
include/linux/dynamic_debug.h:1:1: note: 'strcmp' is defined in header '<string.h>'; did you forget to '#include <string.h>'?
+++ |+#include <string.h>
The decompressor has its own replacement for the linux/string.h contents,
so the normal declaration is not visible here. Since the function is
not actually called, it is sufficient to add a declaration, and this
is in fact the correct one as it matches the definition in
arch/arm/boot/compressed/string.c.
Fixes: 7deabd674988 ("dyndbg: use the module notifier callbacks")
Signed-off-by: Arnd Bergmann <[email protected]>
---
The patch that caused the problem is in linux-next, maybe fold
the fix into that patch if possible
---
arch/arm/boot/compressed/decompress.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index 74255e819831..0669851394f0 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -31,6 +31,7 @@
/* Not needed, but used in some headers pulled in by decompressors */
extern char * strstr(const char * s1, const char *s2);
extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
extern int memcmp(const void *cs, const void *ct, size_t count);
extern char * strchrnul(const char *, int);
--
2.39.2
On 3/10/23 9:01 AM, Arnd Bergmann wrote:
> From: Arnd Bergmann <[email protected]>
>
> After a change to linux/module.h, dyndbg.h is now included
> indirectly from the decompressor for lz4 support, which in turn
> causes a build failure on 32-bit Arm:
>
> In file included from include/linux/module.h:30,
> from arch/arm/boot/compressed/../../../../lib/lz4/lz4_decompress.c:39,
> from arch/arm/boot/compressed/../../../../lib/decompress_unlz4.c:10,
> from arch/arm/boot/compressed/decompress.c:59:
> include/linux/dynamic_debug.h: In function 'ddebug_dyndbg_module_param_cb':
> include/linux/dynamic_debug.h:307:14: error: implicit declaration of function 'strcmp' [-Werror=implicit-function-declaration]
> 307 | if (!strcmp(param, "dyndbg")) {
> | ^~~~~~
> include/linux/dynamic_debug.h:1:1: note: 'strcmp' is defined in header '<string.h>'; did you forget to '#include <string.h>'?
> +++ |+#include <string.h>
>
> The decompressor has its own replacement for the linux/string.h contents,
> so the normal declaration is not visible here. Since the function is
> not actually called, it is sufficient to add a declaration, and this
> is in fact the correct one as it matches the definition in
> arch/arm/boot/compressed/string.c.
>
> Fixes: 7deabd674988 ("dyndbg: use the module notifier callbacks")
> Signed-off-by: Arnd Bergmann <[email protected]>
> ---
> The patch that caused the problem is in linux-next, maybe fold
> the fix into that patch if possible
> ---
> arch/arm/boot/compressed/decompress.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
> index 74255e819831..0669851394f0 100644
> --- a/arch/arm/boot/compressed/decompress.c
> +++ b/arch/arm/boot/compressed/decompress.c
> @@ -31,6 +31,7 @@
> /* Not needed, but used in some headers pulled in by decompressors */
> extern char * strstr(const char * s1, const char *s2);
> extern size_t strlen(const char *s);
> +extern int strcmp(const char *cs, const char *ct);
> extern int memcmp(const void *cs, const void *ct, size_t count);
> extern char * strchrnul(const char *, int);
>
Hi Arnd,
Thank you for the fix up, I was about to look into this...
Acked-by: Jason Baron <[email protected]>
Thanks,
-Jason
> From: Arnd Bergmann <[email protected]>
>
> After a change to linux/module.h, dyndbg.h is now included
> indirectly from the decompressor for lz4 support, which in turn
> causes a build failure on 32-bit Arm:
>
> In file included from include/linux/module.h:30,
> from arch/arm/boot/compressed/../../../../lib/lz4/lz4_decompress.c:39,
> from arch/arm/boot/compressed/../../../../lib/decompress_unlz4.c:10,
> from arch/arm/boot/compressed/decompress.c:59:
> include/linux/dynamic_debug.h: In function 'ddebug_dyndbg_module_param_cb':
> include/linux/dynamic_debug.h:307:14: error: implicit declaration of function 'strcmp' [-Werror=implicit-function-declaration]
> 307 | if (!strcmp(param, "dyndbg")) {
> | ^~~~~~
> include/linux/dynamic_debug.h:1:1: note: 'strcmp' is defined in header '<string.h>'; did you forget to '#include <string.h>'?
> +++ |+#include <string.h>
>
> The decompressor has its own replacement for the linux/string.h contents,
> so the normal declaration is not visible here. Since the function is
> not actually called, it is sufficient to add a declaration, and this
> is in fact the correct one as it matches the definition in
> arch/arm/boot/compressed/string.c.
>
> Fixes: 7deabd674988 ("dyndbg: use the module notifier callbacks")
> Signed-off-by: Arnd Bergmann <[email protected]>
> ---
Reviewed-by: Vincenzo Palazzo <[email protected]>
On Fri, Mar 10, 2023 at 03:01:26PM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <[email protected]>
>
> After a change to linux/module.h, dyndbg.h is now included
> indirectly from the decompressor for lz4 support, which in turn
> causes a build failure on 32-bit Arm:
>
> In file included from include/linux/module.h:30,
> from arch/arm/boot/compressed/../../../../lib/lz4/lz4_decompress.c:39,
> from arch/arm/boot/compressed/../../../../lib/decompress_unlz4.c:10,
> from arch/arm/boot/compressed/decompress.c:59:
> include/linux/dynamic_debug.h: In function 'ddebug_dyndbg_module_param_cb':
> include/linux/dynamic_debug.h:307:14: error: implicit declaration of function 'strcmp' [-Werror=implicit-function-declaration]
> 307 | if (!strcmp(param, "dyndbg")) {
> | ^~~~~~
> include/linux/dynamic_debug.h:1:1: note: 'strcmp' is defined in header '<string.h>'; did you forget to '#include <string.h>'?
> +++ |+#include <string.h>
>
> The decompressor has its own replacement for the linux/string.h contents,
> so the normal declaration is not visible here. Since the function is
> not actually called, it is sufficient to add a declaration, and this
> is in fact the correct one as it matches the definition in
> arch/arm/boot/compressed/string.c.
>
> Fixes: 7deabd674988 ("dyndbg: use the module notifier callbacks")
> Signed-off-by: Arnd Bergmann <[email protected]>
> ---
> The patch that caused the problem is in linux-next, maybe fold
> the fix into that patch if possible
> ---
Thanks for figuring this out, Arnd! Pushed to modules-next!
Luis