Hi All,
This series introduces TI K3 Multicore SoC platforms chipid module driver
which provides identification support of the TI K3 SoCs (family, revision)
and register this information with the SoC bus. It is available under
/sys/devices/soc0/ for user space, and can be checked, where needed,
in Kernel using soc_device_match().
It is also required for introducing support for new revisions of
K3 AM65x/J721E SoCs.
Example J721E:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments K3 J721E SoC
J721E
SR1.0
Example AM65x:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments AM654 Base Board
AM65X
SR1.0
Changes in v2:
- pr_debug() replaced with pr_info() to show SoC info on init
- minor format change
- split series on driver and platform changes
- add Reviewed-by: Lokesh Vutla <[email protected]>
v1: https://lwn.net/Articles/818577/
Grygorii Strashko (2):
dt-bindings: soc: ti: add binding for k3 platforms chipid module
soc: ti: add k3 platforms chipid module driver
.../bindings/soc/ti/k3-socinfo.yaml | 40 ++++++
drivers/soc/ti/Kconfig | 10 ++
drivers/soc/ti/Makefile | 1 +
drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++
4 files changed, 186 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
create mode 100644 drivers/soc/ti/k3-socinfo.c
--
2.17.1
The Texas Instruments K3 Multicore SoC platforms have chipid module which
is represented by CTRLMMR_xxx_JTAGID register and contains information
about SoC id and revision.
Bits:
31-28 VARIANT Device variant
27-12 PARTNO Part number
11-1 MFG Indicates TI as manufacturer (0x17)
1 Always 1
This patch adds corresponding driver to identify the TI K3 SoC family and
revision, and registers this information with the SoC bus. It is available
under /sys/devices/soc0/ for user space, and can be checked, where needed,
in Kernel using soc_device_match().
Identification is done by:
- checking MFG to be TI ID
- retrieving Device variant (revision)
- retrieving Part number and convert it to the family
- retrieving machine from DT "/model"
Example J721E:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments K3 J721E SoC
J721E
SR1.0
Example AM65x:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments AM654 Base Board
AM65X
SR1.0
Signed-off-by: Grygorii Strashko <[email protected]>
Reviewed-by: Lokesh Vutla <[email protected]>
---
drivers/soc/ti/Kconfig | 10 +++
drivers/soc/ti/Makefile | 1 +
drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++++++++++++++++++++
3 files changed, 146 insertions(+)
create mode 100644 drivers/soc/ti/k3-socinfo.c
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 4486e055794c..e192fb788836 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -91,6 +91,16 @@ config TI_K3_RINGACC
and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
If unsure, say N.
+config TI_K3_SOCINFO
+ bool
+ depends on ARCH_K3 || COMPILE_TEST
+ select SOC_BUS
+ select MFD_SYSCON
+ help
+ Include support for the SoC bus socinfo for the TI K3 Multicore SoC
+ platforms to provide information about the SoC family and
+ variant to user space.
+
endif # SOC_TI
config TI_SCI_INTA_MSI_DOMAIN
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index bec827937a5f..1110e5c98685 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o
obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o
obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN) += ti_sci_inta_msi.o
obj-$(CONFIG_TI_K3_RINGACC) += k3-ringacc.o
+obj-$(CONFIG_TI_K3_SOCINFO) += k3-socinfo.o
diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
new file mode 100644
index 000000000000..4c21e099d3c7
--- /dev/null
+++ b/drivers/soc/ti/k3-socinfo.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI K3 SoC info driver
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/sys_soc.h>
+
+#define CTRLMMR_WKUP_JTAGID_REG 0
+/*
+ * Bits:
+ * 31-28 VARIANT Device variant
+ * 27-12 PARTNO Part number
+ * 11-1 MFG Indicates TI as manufacturer (0x17)
+ * 1 Always 1
+ */
+#define CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT (28)
+#define CTRLMMR_WKUP_JTAGID_VARIANT_MASK GENMASK(31, 28)
+
+#define CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT (12)
+#define CTRLMMR_WKUP_JTAGID_PARTNO_MASK GENMASK(27, 12)
+
+#define CTRLMMR_WKUP_JTAGID_MFG_SHIFT (1)
+#define CTRLMMR_WKUP_JTAGID_MFG_MASK GENMASK(11, 1)
+
+#define CTRLMMR_WKUP_JTAGID_MFG_TI 0x17
+
+static const struct k3_soc_id {
+ unsigned int id;
+ const char *family_name;
+} k3_soc_ids[] = {
+ { 0xBB5A, "AM65X" },
+ { 0xBB64, "J721E" },
+};
+
+static int __init partno_to_names(unsigned int partno,
+ struct soc_device_attribute *soc_dev_attr)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(k3_soc_ids); i++)
+ if (partno == k3_soc_ids[i].id) {
+ soc_dev_attr->family = k3_soc_ids[i].family_name;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int __init k3_chipinfo_init(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ struct device_node *node;
+ struct regmap *regmap;
+ u32 partno_id;
+ u32 variant;
+ u32 jtag_id;
+ u32 mfg;
+ int ret;
+
+ node = of_find_compatible_node(NULL, NULL, "ti,am654-chipid");
+ if (!node)
+ return -ENODEV;
+
+ regmap = device_node_to_regmap(node);
+ of_node_put(node);
+
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = regmap_read(regmap, CTRLMMR_WKUP_JTAGID_REG, &jtag_id);
+ if (ret < 0)
+ return ret;
+
+ mfg = (jtag_id & CTRLMMR_WKUP_JTAGID_MFG_MASK) >>
+ CTRLMMR_WKUP_JTAGID_MFG_SHIFT;
+
+ if (mfg != CTRLMMR_WKUP_JTAGID_MFG_TI) {
+ pr_err("Invalid MFG SoC\n");
+ return -ENODEV;
+ }
+
+ variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
+ CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
+ variant++;
+
+ partno_id = (jtag_id & CTRLMMR_WKUP_JTAGID_PARTNO_MASK) >>
+ CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%x.0", variant);
+
+ ret = partno_to_names(partno_id, soc_dev_attr);
+ if (ret) {
+ pr_err("Unknown SoC JTAGID[0x%08X]\n", jtag_id);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ node = of_find_node_by_path("/");
+ of_property_read_string(node, "model", &soc_dev_attr->machine);
+ of_node_put(node);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ ret = PTR_ERR(soc_dev);
+ goto err;
+ }
+
+ pr_info("Family:%s rev:%s JTAGID[0x%08x] Detected\n",
+ soc_dev_attr->family,
+ soc_dev_attr->revision, jtag_id);
+
+ return 0;
+
+err:
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr);
+ return ret;
+}
+
+subsys_initcall(k3_chipinfo_init);
--
2.17.1
Add DT binding for Texas Instruments K3 Multicore SoC platforms chipid
module which is represented by CTRLMMR_xxx_JTAGID register and contains
information about SoC id and revision.
Signed-off-by: Grygorii Strashko <[email protected]>
Reviewed-by: Lokesh Vutla <[email protected]>
---
.../bindings/soc/ti/k3-socinfo.yaml | 40 +++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
diff --git a/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
new file mode 100644
index 000000000000..a1a8423b2e2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/k3-socinfo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC platforms chipid module
+
+maintainers:
+ - Tero Kristo <[email protected]>
+ - Nishanth Menon <[email protected]>
+
+description: |
+ Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is
+ represented by CTRLMMR_xxx_JTAGID register which contains information about
+ SoC id and revision.
+
+properties:
+ $nodename:
+ pattern: "^chipid@[0-9a-f]+$"
+
+ compatible:
+ items:
+ - const: ti,am654-chipid
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ chipid@43000014 {
+ compatible = "ti,am654-chipid";
+ reg = <0x43000014 0x4>;
+ };
--
2.17.1
On 5/5/20 12:34 PM, Grygorii Strashko wrote:
> Hi All,
>
> This series introduces TI K3 Multicore SoC platforms chipid module driver
> which provides identification support of the TI K3 SoCs (family, revision)
> and register this information with the SoC bus. It is available under
> /sys/devices/soc0/ for user space, and can be checked, where needed,
> in Kernel using soc_device_match().
> It is also required for introducing support for new revisions of
> K3 AM65x/J721E SoCs.
>
> Example J721E:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments K3 J721E SoC
> J721E
> SR1.0
>
> Example AM65x:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments AM654 Base Board
> AM65X
> SR1.0
>
> Changes in v2:
> - pr_debug() replaced with pr_info() to show SoC info on init
> - minor format change
> - split series on driver and platform changes
> - add Reviewed-by: Lokesh Vutla <[email protected]>
>
> v1: https://lwn.net/Articles/818577/
>
> Grygorii Strashko (2):
> dt-bindings: soc: ti: add binding for k3 platforms chipid module
> soc: ti: add k3 platforms chipid module driver
>
Need ack from DT maintainers on bindings.
Regards,
Santosh
Hi Rob,
On 05/05/2020 22:34, Grygorii Strashko wrote:
> Add DT binding for Texas Instruments K3 Multicore SoC platforms chipid
> module which is represented by CTRLMMR_xxx_JTAGID register and contains
> information about SoC id and revision.
>
> Signed-off-by: Grygorii Strashko <[email protected]>
> Reviewed-by: Lokesh Vutla <[email protected]>
> ---
> .../bindings/soc/ti/k3-socinfo.yaml | 40 +++++++++++++++++++
> 1 file changed, 40 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
> new file mode 100644
> index 000000000000..a1a8423b2e2e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/ti/k3-socinfo.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments K3 Multicore SoC platforms chipid module
> +
> +maintainers:
> + - Tero Kristo <[email protected]>
> + - Nishanth Menon <[email protected]>
> +
> +description: |
> + Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is
> + represented by CTRLMMR_xxx_JTAGID register which contains information about
> + SoC id and revision.
> +
> +properties:
> + $nodename:
> + pattern: "^chipid@[0-9a-f]+$"
> +
> + compatible:
> + items:
> + - const: ti,am654-chipid
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + chipid@43000014 {
> + compatible = "ti,am654-chipid";
> + reg = <0x43000014 0x4>;
> + };
>
Rob, Do you have any comments here?
--
Best regards,
grygorii
On 05/05/2020 22:34, Grygorii Strashko wrote:
> The Texas Instruments K3 Multicore SoC platforms have chipid module which
> is represented by CTRLMMR_xxx_JTAGID register and contains information
> about SoC id and revision.
> Bits:
> 31-28 VARIANT Device variant
> 27-12 PARTNO Part number
> 11-1 MFG Indicates TI as manufacturer (0x17)
> 1 Always 1
>
> This patch adds corresponding driver to identify the TI K3 SoC family and
> revision, and registers this information with the SoC bus. It is available
> under /sys/devices/soc0/ for user space, and can be checked, where needed,
> in Kernel using soc_device_match().
>
> Identification is done by:
> - checking MFG to be TI ID
> - retrieving Device variant (revision)
> - retrieving Part number and convert it to the family
> - retrieving machine from DT "/model"
>
> Example J721E:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments K3 J721E SoC
> J721E
> SR1.0
>
> Example AM65x:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments AM654 Base Board
> AM65X
> SR1.0
>
> Signed-off-by: Grygorii Strashko <[email protected]>
> Reviewed-by: Lokesh Vutla <[email protected]>
> ---
> drivers/soc/ti/Kconfig | 10 +++
> drivers/soc/ti/Makefile | 1 +
> drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 146 insertions(+)
> create mode 100644 drivers/soc/ti/k3-socinfo.c
>
> diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
> index 4486e055794c..e192fb788836 100644
> --- a/drivers/soc/ti/Kconfig
> +++ b/drivers/soc/ti/Kconfig
> @@ -91,6 +91,16 @@ config TI_K3_RINGACC
> and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
> If unsure, say N.
>
> +config TI_K3_SOCINFO
> + bool
> + depends on ARCH_K3 || COMPILE_TEST
> + select SOC_BUS
> + select MFD_SYSCON
> + help
> + Include support for the SoC bus socinfo for the TI K3 Multicore SoC
> + platforms to provide information about the SoC family and
> + variant to user space.
> +
> endif # SOC_TI
>
> config TI_SCI_INTA_MSI_DOMAIN
> diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
> index bec827937a5f..1110e5c98685 100644
> --- a/drivers/soc/ti/Makefile
> +++ b/drivers/soc/ti/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o
> obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o
> obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN) += ti_sci_inta_msi.o
> obj-$(CONFIG_TI_K3_RINGACC) += k3-ringacc.o
> +obj-$(CONFIG_TI_K3_SOCINFO) += k3-socinfo.o
> diff --git a/drivers/soc/ti/k3-socinfo.c b/drivers/soc/ti/k3-socinfo.c
> new file mode 100644
> index 000000000000..4c21e099d3c7
> --- /dev/null
> +++ b/drivers/soc/ti/k3-socinfo.c
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI K3 SoC info driver
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/sys_soc.h>
> +
> +#define CTRLMMR_WKUP_JTAGID_REG 0
> +/*
> + * Bits:
> + * 31-28 VARIANT Device variant
> + * 27-12 PARTNO Part number
> + * 11-1 MFG Indicates TI as manufacturer (0x17)
> + * 1 Always 1
> + */
> +#define CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT (28)
> +#define CTRLMMR_WKUP_JTAGID_VARIANT_MASK GENMASK(31, 28)
> +
> +#define CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT (12)
> +#define CTRLMMR_WKUP_JTAGID_PARTNO_MASK GENMASK(27, 12)
> +
> +#define CTRLMMR_WKUP_JTAGID_MFG_SHIFT (1)
> +#define CTRLMMR_WKUP_JTAGID_MFG_MASK GENMASK(11, 1)
> +
> +#define CTRLMMR_WKUP_JTAGID_MFG_TI 0x17
> +
> +static const struct k3_soc_id {
> + unsigned int id;
> + const char *family_name;
> +} k3_soc_ids[] = {
> + { 0xBB5A, "AM65X" },
> + { 0xBB64, "J721E" },
> +};
> +
> +static int __init partno_to_names(unsigned int partno,
> + struct soc_device_attribute *soc_dev_attr)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(k3_soc_ids); i++)
> + if (partno == k3_soc_ids[i].id) {
> + soc_dev_attr->family = k3_soc_ids[i].family_name;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int __init k3_chipinfo_init(void)
> +{
> + struct soc_device_attribute *soc_dev_attr;
> + struct soc_device *soc_dev;
> + struct device_node *node;
> + struct regmap *regmap;
> + u32 partno_id;
> + u32 variant;
> + u32 jtag_id;
> + u32 mfg;
> + int ret;
> +
> + node = of_find_compatible_node(NULL, NULL, "ti,am654-chipid");
> + if (!node)
> + return -ENODEV;
> +
> + regmap = device_node_to_regmap(node);
> + of_node_put(node);
> +
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + ret = regmap_read(regmap, CTRLMMR_WKUP_JTAGID_REG, &jtag_id);
> + if (ret < 0)
> + return ret;
> +
> + mfg = (jtag_id & CTRLMMR_WKUP_JTAGID_MFG_MASK) >>
> + CTRLMMR_WKUP_JTAGID_MFG_SHIFT;
> +
> + if (mfg != CTRLMMR_WKUP_JTAGID_MFG_TI) {
> + pr_err("Invalid MFG SoC\n");
> + return -ENODEV;
> + }
> +
> + variant = (jtag_id & CTRLMMR_WKUP_JTAGID_VARIANT_MASK) >>
> + CTRLMMR_WKUP_JTAGID_VARIANT_SHIFT;
> + variant++;
> +
> + partno_id = (jtag_id & CTRLMMR_WKUP_JTAGID_PARTNO_MASK) >>
> + CTRLMMR_WKUP_JTAGID_PARTNO_SHIFT;
> +
> + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
> + if (!soc_dev_attr)
> + return -ENOMEM;
> +
> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "SR%x.0", variant);
kasprintf can fail.
-Tero
> +
> + ret = partno_to_names(partno_id, soc_dev_attr);
> + if (ret) {
> + pr_err("Unknown SoC JTAGID[0x%08X]\n", jtag_id);
> + ret = -ENODEV;
> + goto err;
> + }
> +
> + node = of_find_node_by_path("/");
> + of_property_read_string(node, "model", &soc_dev_attr->machine);
> + of_node_put(node);
> +
> + soc_dev = soc_device_register(soc_dev_attr);
> + if (IS_ERR(soc_dev)) {
> + ret = PTR_ERR(soc_dev);
> + goto err;
> + }
> +
> + pr_info("Family:%s rev:%s JTAGID[0x%08x] Detected\n",
> + soc_dev_attr->family,
> + soc_dev_attr->revision, jtag_id);
> +
> + return 0;
> +
> +err:
> + kfree(soc_dev_attr->revision);
> + kfree(soc_dev_attr);
> + return ret;
> +}
> +
> +subsys_initcall(k3_chipinfo_init);
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 05/05/2020 22:34, Grygorii Strashko wrote:
> Hi All,
>
> This series introduces TI K3 Multicore SoC platforms chipid module driver
> which provides identification support of the TI K3 SoCs (family, revision)
> and register this information with the SoC bus. It is available under
> /sys/devices/soc0/ for user space, and can be checked, where needed,
> in Kernel using soc_device_match().
> It is also required for introducing support for new revisions of
> K3 AM65x/J721E SoCs.
>
> Example J721E:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments K3 J721E SoC
> J721E
> SR1.0
>
> Example AM65x:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments AM654 Base Board
> AM65X
> SR1.0
>
> Changes in v2:
> - pr_debug() replaced with pr_info() to show SoC info on init
> - minor format change
> - split series on driver and platform changes
> - add Reviewed-by: Lokesh Vutla <[email protected]>
>
> v1: https://lwn.net/Articles/818577/
>
> Grygorii Strashko (2):
> dt-bindings: soc: ti: add binding for k3 platforms chipid module
> soc: ti: add k3 platforms chipid module driver
>
> .../bindings/soc/ti/k3-socinfo.yaml | 40 ++++++
> drivers/soc/ti/Kconfig | 10 ++
> drivers/soc/ti/Makefile | 1 +
> drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++
> 4 files changed, 186 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
> create mode 100644 drivers/soc/ti/k3-socinfo.c
>
Got a minor comments on patch #2, other than that looks fine to me. Once
that is fixed, for whole series:
Reviewed-by: Tero Kristo <[email protected]>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki