This is part of the general push to deprecate register_sysctl_paths and
register_sysctl_table. The old way of doing this through
register_sysctl_base and DECLARE_SYSCTL_BASE macro is replaced with a
call to register_sysctl_init. The 5 base paths affected are: "kernel",
"vm", "debug", "dev" and "fs".
We remove the register_sysctl_base function and the DECLARE_SYSCTL_BASE
macro since they are no longer needed.
In order to quickly acertain that the paths did not actually change I
executed `find /proc/sys/ | sha1sum` and made sure that the sha was the
same before and after the commit.
We end up saving 563 bytes with this change:
./scripts/bloat-o-meter vmlinux.0.base vmlinux.1.refactor-base-paths
add/remove: 0/5 grow/shrink: 2/0 up/down: 77/-640 (-563)
Function old new delta
sysctl_init_bases 55 111 +56
init_fs_sysctls 12 33 +21
vm_base_table 128 - -128
kernel_base_table 128 - -128
fs_base_table 128 - -128
dev_base_table 128 - -128
debug_base_table 128 - -128
Total: Before=21258215, After=21257652, chg -0.00%
Signed-off-by: Joel Granados <[email protected]>
[mcgrof: modified to use register_sysctl_init() over register_sysctl()
and add bloat-o-meter stats]
Signed-off-by: Luis Chamberlain <[email protected]>
Tested-by: Stephen Rothwell <[email protected]>
---
fs/sysctls.c | 5 ++---
include/linux/sysctl.h | 23 -----------------------
kernel/sysctl.c | 30 +++++++++---------------------
3 files changed, 11 insertions(+), 47 deletions(-)
diff --git a/fs/sysctls.c b/fs/sysctls.c
index c701273c9432..76a0aee8c229 100644
--- a/fs/sysctls.c
+++ b/fs/sysctls.c
@@ -29,11 +29,10 @@ static struct ctl_table fs_shared_sysctls[] = {
{ }
};
-DECLARE_SYSCTL_BASE(fs, fs_shared_sysctls);
-
static int __init init_fs_sysctls(void)
{
- return register_sysctl_base(fs);
+ register_sysctl_init("fs", fs_shared_sysctls);
+ return 0;
}
early_initcall(init_fs_sysctls);
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 218e56a26fb0..653b66c762b1 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -197,20 +197,6 @@ struct ctl_path {
#ifdef CONFIG_SYSCTL
-#define DECLARE_SYSCTL_BASE(_name, _table) \
-static struct ctl_table _name##_base_table[] = { \
- { \
- .procname = #_name, \
- .mode = 0555, \
- .child = _table, \
- }, \
- { }, \
-}
-
-extern int __register_sysctl_base(struct ctl_table *base_table);
-
-#define register_sysctl_base(_name) __register_sysctl_base(_name##_base_table)
-
void proc_sys_poll_notify(struct ctl_table_poll *poll);
extern void setup_sysctl_set(struct ctl_table_set *p,
@@ -247,15 +233,6 @@ extern struct ctl_table sysctl_mount_point[];
#else /* CONFIG_SYSCTL */
-#define DECLARE_SYSCTL_BASE(_name, _table)
-
-static inline int __register_sysctl_base(struct ctl_table *base_table)
-{
- return 0;
-}
-
-#define register_sysctl_base(table) __register_sysctl_base(table)
-
static inline void register_sysctl_init(const char *path, struct ctl_table *table)
{
}
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index bfe53e835524..73fa9cf7ee11 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1782,11 +1782,6 @@ static struct ctl_table kern_table[] = {
.mode = 0644,
.proc_handler = sysctl_max_threads,
},
- {
- .procname = "usermodehelper",
- .mode = 0555,
- .child = usermodehelper_table,
- },
{
.procname = "overflowuid",
.data = &overflowuid,
@@ -1962,13 +1957,6 @@ static struct ctl_table kern_table[] = {
.proc_handler = proc_dointvec,
},
#endif
-#ifdef CONFIG_KEYS
- {
- .procname = "keys",
- .mode = 0555,
- .child = key_sysctls,
- },
-#endif
#ifdef CONFIG_PERF_EVENTS
/*
* User-space scripts rely on the existence of this file
@@ -2348,17 +2336,17 @@ static struct ctl_table dev_table[] = {
{ }
};
-DECLARE_SYSCTL_BASE(kernel, kern_table);
-DECLARE_SYSCTL_BASE(vm, vm_table);
-DECLARE_SYSCTL_BASE(debug, debug_table);
-DECLARE_SYSCTL_BASE(dev, dev_table);
-
int __init sysctl_init_bases(void)
{
- register_sysctl_base(kernel);
- register_sysctl_base(vm);
- register_sysctl_base(debug);
- register_sysctl_base(dev);
+ register_sysctl_init("kernel", kern_table);
+ register_sysctl_init("kernel/usermodehelper", usermodehelper_table);
+#ifdef CONFIG_KEYS
+ register_sysctl_init("kernel/keys", key_sysctls);
+#endif
+
+ register_sysctl_init("vm", vm_table);
+ register_sysctl_init("debug", debug_table);
+ register_sysctl_init("dev", dev_table);
return 0;
}
--
2.30.2
On Tue, May 23, 2023 at 02:22:19PM +0200, Joel Granados wrote:
> This is part of the general push to deprecate register_sysctl_paths and
> register_sysctl_table. The old way of doing this through
> register_sysctl_base and DECLARE_SYSCTL_BASE macro is replaced with a
> call to register_sysctl_init. The 5 base paths affected are: "kernel",
> "vm", "debug", "dev" and "fs".
>
> We remove the register_sysctl_base function and the DECLARE_SYSCTL_BASE
> macro since they are no longer needed.
>
> In order to quickly acertain that the paths did not actually change I
> executed `find /proc/sys/ | sha1sum` and made sure that the sha was the
> same before and after the commit.
>
> We end up saving 563 bytes with this change:
>
> ./scripts/bloat-o-meter vmlinux.0.base vmlinux.1.refactor-base-paths
> add/remove: 0/5 grow/shrink: 2/0 up/down: 77/-640 (-563)
> Function old new delta
> sysctl_init_bases 55 111 +56
> init_fs_sysctls 12 33 +21
> vm_base_table 128 - -128
> kernel_base_table 128 - -128
> fs_base_table 128 - -128
> dev_base_table 128 - -128
> debug_base_table 128 - -128
> Total: Before=21258215, After=21257652, chg -0.00%
>
> Signed-off-by: Joel Granados <[email protected]>
> [mcgrof: modified to use register_sysctl_init() over register_sysctl()
> and add bloat-o-meter stats]
> Signed-off-by: Luis Chamberlain <[email protected]>
> Tested-by: Stephen Rothwell <[email protected]>
> ---
Acked-by: Christian Brauner <[email protected]>
On Tue, May 23, 2023 at 02:22:19PM +0200, Joel Granados wrote:
> This is part of the general push to deprecate register_sysctl_paths and
> register_sysctl_table. The old way of doing this through
> register_sysctl_base and DECLARE_SYSCTL_BASE macro is replaced with a
> call to register_sysctl_init. The 5 base paths affected are: "kernel",
> "vm", "debug", "dev" and "fs".
>
> We remove the register_sysctl_base function and the DECLARE_SYSCTL_BASE
> macro since they are no longer needed.
>
> In order to quickly acertain that the paths did not actually change I
> executed `find /proc/sys/ | sha1sum` and made sure that the sha was the
> same before and after the commit.
>
> We end up saving 563 bytes with this change:
>
> ./scripts/bloat-o-meter vmlinux.0.base vmlinux.1.refactor-base-paths
> add/remove: 0/5 grow/shrink: 2/0 up/down: 77/-640 (-563)
> Function old new delta
> sysctl_init_bases 55 111 +56
> init_fs_sysctls 12 33 +21
> vm_base_table 128 - -128
> kernel_base_table 128 - -128
> fs_base_table 128 - -128
> dev_base_table 128 - -128
> debug_base_table 128 - -128
> Total: Before=21258215, After=21257652, chg -0.00%
>
> Signed-off-by: Joel Granados <[email protected]>
> [mcgrof: modified to use register_sysctl_init() over register_sysctl()
> and add bloat-o-meter stats]
> Signed-off-by: Luis Chamberlain <[email protected]>
> Tested-by: Stephen Rothwell <[email protected]>
This needs a Fixes tag so it doesn't get backported by some weird fluke.
Or you could just fold it in with the original patch which introduced
the bug.
Probably add a copy of the output from dmesg? Maybe add some
Reported-by tags?
regards,
dan carpenter
>
On Thu, May 25, 2023 at 11:37:47AM +0300, Dan Carpenter wrote:
> On Tue, May 23, 2023 at 02:22:19PM +0200, Joel Granados wrote:
> > This is part of the general push to deprecate register_sysctl_paths and
> > register_sysctl_table. The old way of doing this through
> > register_sysctl_base and DECLARE_SYSCTL_BASE macro is replaced with a
> > call to register_sysctl_init. The 5 base paths affected are: "kernel",
> > "vm", "debug", "dev" and "fs".
> >
> > We remove the register_sysctl_base function and the DECLARE_SYSCTL_BASE
> > macro since they are no longer needed.
> >
> > In order to quickly acertain that the paths did not actually change I
> > executed `find /proc/sys/ | sha1sum` and made sure that the sha was the
> > same before and after the commit.
> >
> > We end up saving 563 bytes with this change:
> >
> > ./scripts/bloat-o-meter vmlinux.0.base vmlinux.1.refactor-base-paths
> > add/remove: 0/5 grow/shrink: 2/0 up/down: 77/-640 (-563)
> > Function old new delta
> > sysctl_init_bases 55 111 +56
> > init_fs_sysctls 12 33 +21
> > vm_base_table 128 - -128
> > kernel_base_table 128 - -128
> > fs_base_table 128 - -128
> > dev_base_table 128 - -128
> > debug_base_table 128 - -128
> > Total: Before=21258215, After=21257652, chg -0.00%
> >
> > Signed-off-by: Joel Granados <[email protected]>
> > [mcgrof: modified to use register_sysctl_init() over register_sysctl()
> > and add bloat-o-meter stats]
> > Signed-off-by: Luis Chamberlain <[email protected]>
> > Tested-by: Stephen Rothwell <[email protected]>
>
> This needs a Fixes tag so it doesn't get backported by some weird fluke.
> Or you could just fold it in with the original patch which introduced
I folded it into the original patch
thx
Best
> the bug.
>
> Probably add a copy of the output from dmesg? Maybe add some
> Reported-by tags?
>
> regards,
> dan carpenter
> >
--
Joel Granados