From: Guanbing Huang <[email protected]>
The function __uart_read_properties doesn't cover PNP devices, so add IRQ
processing for PNP devices in the branch.
Signed-off-by: Guanbing Huang <[email protected]>
Suggested-by: Andy Shevchenko <[email protected]>
Reviewed-by: Bing Fan <[email protected]>
Tested-by: Linheng Du <[email protected]>
---
v4 -> v5: change "pnp" and "irq" in the commit message to uppercase, modify the subject
to start with "serial: port:", modify the location of the header file pnp.h
drivers/tty/serial/serial_port.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
index 22b9eeb23e68..8504bae1d2c9 100644
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -11,6 +11,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/pnp.h>
#include <linux/property.h>
#include <linux/serial_core.h>
#include <linux/spinlock.h>
@@ -221,7 +222,11 @@ static int __uart_read_properties(struct uart_port *port, bool use_defaults)
if (dev_is_platform(dev))
ret = platform_get_irq(to_platform_device(dev), 0);
- else
+ else if (dev_is_pnp(dev)) {
+ ret = pnp_irq(to_pnp_dev(dev), 0);
+ if (ret < 0)
+ ret = -ENXIO;
+ } else
ret = fwnode_irq_get(dev_fwnode(dev), 0);
if (ret == -EPROBE_DEFER)
return ret;
--
2.17.1
Guanbing Huang wrote:
> From: Guanbing Huang <[email protected]>
>
> The function __uart_read_properties doesn't cover PNP devices, so add IRQ
> processing for PNP devices in the branch.
>
> Signed-off-by: Guanbing Huang <[email protected]>
> Suggested-by: Andy Shevchenko <[email protected]>
> Reviewed-by: Bing Fan <[email protected]>
> Tested-by: Linheng Du <[email protected]>
> ---
> v4 -> v5: change "pnp" and "irq" in the commit message to uppercase, modify the subject
> to start with "serial: port:", modify the location of the header file pnp.h
>
> drivers/tty/serial/serial_port.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
> index 22b9eeb23e68..8504bae1d2c9 100644
> --- a/drivers/tty/serial/serial_port.c
> +++ b/drivers/tty/serial/serial_port.c
> @@ -11,6 +11,7 @@
> #include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> +#include <linux/pnp.h>
> #include <linux/property.h>
> #include <linux/serial_core.h>
> #include <linux/spinlock.h>
> @@ -221,7 +222,11 @@ static int __uart_read_properties(struct uart_port *port, bool use_defaults)
>
> if (dev_is_platform(dev))
> ret = platform_get_irq(to_platform_device(dev), 0);
> - else
> + else if (dev_is_pnp(dev)) {
> + ret = pnp_irq(to_pnp_dev(dev), 0);
> + if (ret < 0)
> + ret = -ENXIO;
> + } else
> ret = fwnode_irq_get(dev_fwnode(dev), 0);
> if (ret == -EPROBE_DEFER)
> return ret;
Hello all, trying to build 6.10-rc1 fails for me in serial_base.o:
CALL scripts/checksyscalls.sh
DESCEND objtool
INSTALL libsubcmd_headers
CC [M] drivers/tty/serial/serial_port.o
LD [M] drivers/tty/serial/serial_base.o
MODPOST Module.symvers
ERROR: modpost: "pnp_bus_type" [drivers/tty/serial/serial_base.ko]
undefined!
make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Error 1
make[1]: ***
[/woody/src/kernels/linux-6.10-pingu/work/linux-6.10/Makefile:1892:
modpost] Error 2
make: *** [Makefile:246: __sub-make] Error 2
Reversing the patch "fixes" the problem :-(
I am building on a Debian bookworm system, gcc 12.2
Any suggestions how to make it work?
Thanks, Woody
On Mon, May 27, 2024 at 03:44:42PM -0400, Woody Suwalski wrote:
> Guanbing Huang wrote:
> > From: Guanbing Huang <[email protected]>
> >
> > The function __uart_read_properties doesn't cover PNP devices, so add IRQ
> > processing for PNP devices in the branch.
..
> > #include <linux/property.h>
> > #include <linux/serial_core.h>
> > #include <linux/spinlock.h>
> > @@ -221,7 +222,11 @@ static int __uart_read_properties(struct uart_port *port, bool use_defaults)
> > if (dev_is_platform(dev))
> > ret = platform_get_irq(to_platform_device(dev), 0);
> > - else
> > + else if (dev_is_pnp(dev)) {
> > + ret = pnp_irq(to_pnp_dev(dev), 0);
> > + if (ret < 0)
> > + ret = -ENXIO;
> > + } else
> > ret = fwnode_irq_get(dev_fwnode(dev), 0);
> > if (ret == -EPROBE_DEFER)
> > return ret;
>
> Hello all, trying to build 6.10-rc1 fails for me in serial_base.o:
> ? CALL??? scripts/checksyscalls.sh
> ? DESCEND objtool
> ? INSTALL libsubcmd_headers
> ? CC [M]? drivers/tty/serial/serial_port.o
> ? LD [M]? drivers/tty/serial/serial_base.o
> ? MODPOST Module.symvers
> ERROR: modpost: "pnp_bus_type" [drivers/tty/serial/serial_base.ko]
> undefined!
> make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Error 1
> make[1]: ***
> [/woody/src/kernels/linux-6.10-pingu/work/linux-6.10/Makefile:1892: modpost]
> Error 2
> make: *** [Makefile:246: __sub-make] Error 2
>
> Reversing the patch "fixes" the problem :-(
> I am building on a Debian bookworm system, gcc 12.2
>
> Any suggestions? how to make it work?
Yes, I will send a patch soon. Thanks for the report!
--
With Best Regards,
Andy Shevchenko