Subject: [PATCH 0/2] SDM630/660 Venus hardware video decoder/encoder

This patch series enables the Venus hardware video decoder/encoder
on the SDM630/660 series of SoCs.

Please keep in mind that these patches (especially the dt-bindings one)
depend on series 480030 (SDM630/660 GCC/MMCC/GPUCC clock controllers),
as the MultiMedia Clock Controller and related fixes in the GCC one
are needed to enable functionality of the Venus block.

This series was tested on SDM630 and SDM636 on the following smartphones:
- Sony Xperia 10 (SDM630)
- Sony Xperia 10 Plus (SDM636)
- Sony Xperia XA2 (SDM630)
- Sony Xperia XA2 Ultra (SDM630)

P.S.: Remember! SDM636 is a variant of SDM660, *not* a variant of 630.

AngeloGioacchino Del Regno (2):
media: venus: core: Add sdm660 DT compatible and resource struct
media: dt-bindings: media: venus: Add sdm660 DT schema

.../bindings/media/qcom,sdm660-venus.yaml | 164 ++++++++++++++++++
drivers/media/platform/qcom/venus/core.c | 66 +++++++
2 files changed, 230 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml


base-commit: 012bd807cf654b992cdc4db7eab85c1e95f9d571
prerequisite-patch-id: 734bdefdb043a8f91a48916246cc9a36fb5966e5
prerequisite-patch-id: 999517c02973237996492a41ed5bfc2990083932
prerequisite-patch-id: a48910425fac61948a7a26bec4d40d63e3368569
prerequisite-patch-id: b1a1a4216eed0d04dd16e6e8e1053dee185d06d8
prerequisite-patch-id: dff12be2631cc21ef1c3c930fba49d979f5055fe
--
2.29.2


Subject: [PATCH 1/2] media: venus: core: Add sdm660 DT compatible and resource struct

Add the SDM660 DT compatible and its resource structure, also
including support for the Venus pmdomains, in order to support
the Venus block in SDM630, SDM636, SDM660 and SDA variants.

This SoC features Venus 4.4 (HFI3XX), with one vcodec used for
both encoding and decoding, switched on through two GDSCs.
The core clock for this Venus chip is powered by the RPM VDD_CX
power domain.

Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
---
drivers/media/platform/qcom/venus/core.c | 66 ++++++++++++++++++++++++
1 file changed, 66 insertions(+)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index bdd293faaad0..83ca86a63241 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -565,6 +565,71 @@ static const struct venus_resources sdm845_res_v2 = {
.fwname = "qcom/venus-5.2/venus.mdt",
};

+static const struct freq_tbl sdm660_freq_table[] = {
+ { 0, 518400000 },
+ { 0, 441600000 },
+ { 0, 404000000 },
+ { 0, 320000000 },
+ { 0, 269330000 },
+ { 0, 133330000 },
+};
+
+static const struct reg_val sdm660_reg_preset[] = {
+ { 0x80010, 0x001f001f },
+ { 0x80018, 0x00000156 },
+ { 0x8001C, 0x00000156 },
+};
+
+static const struct bw_tbl sdm660_bw_table_enc[] = {
+ { 979200, 1044000, 0, 2446336, 0 }, /* 4k UHD @ 30 */
+ { 864000, 887000, 0, 2108416, 0 }, /* 720p @ 240 */
+ { 489600, 666000, 0, 1207296, 0 }, /* 1080p @ 60 */
+ { 432000, 578000, 0, 1058816, 0 }, /* 720p @ 120 */
+ { 244800, 346000, 0, 616448, 0 }, /* 1080p @ 30 */
+ { 216000, 293000, 0, 534528, 0 }, /* 720p @ 60 */
+ { 108000, 151000, 0, 271360, 0 }, /* 720p @ 30 */
+};
+
+static const struct bw_tbl sdm660_bw_table_dec[] = {
+ { 979200, 2365000, 0, 1892000, 0 }, /* 4k UHD @ 30 */
+ { 864000, 1978000, 0, 1554000, 0 }, /* 720p @ 240 */
+ { 489600, 1133000, 0, 895000, 0 }, /* 1080p @ 60 */
+ { 432000, 994000, 0, 781000, 0 }, /* 720p @ 120 */
+ { 244800, 580000, 0, 460000, 0 }, /* 1080p @ 30 */
+ { 216000, 501000, 0, 301000, 0 }, /* 720p @ 60 */
+ { 108000, 255000, 0, 202000, 0 }, /* 720p @ 30 */
+};
+
+static const struct venus_resources sdm660_res = {
+ .freq_tbl = sdm660_freq_table,
+ .freq_tbl_size = ARRAY_SIZE(sdm660_freq_table),
+ .reg_tbl = sdm660_reg_preset,
+ .reg_tbl_size = ARRAY_SIZE(sdm660_reg_preset),
+ .bw_tbl_enc = sdm660_bw_table_enc,
+ .bw_tbl_enc_size = ARRAY_SIZE(sdm660_bw_table_enc),
+ .bw_tbl_dec = sdm660_bw_table_dec,
+ .bw_tbl_dec_size = ARRAY_SIZE(sdm660_bw_table_dec),
+ .clks = {"core", "iface", "bus_throttle", "bus" },
+ .clks_num = 4,
+ .vcodec0_clks = { "vcodec0_core" },
+ .vcodec_clks_num = 1,
+ .vcodec_pmdomains = { "venus", "vcodec0" },
+ .vcodec_pmdomains_num = 2,
+ .opp_pmdomain = (const char *[]) { "cx", NULL },
+ .vcodec_num = 1,
+ .max_load = 1036800,
+ .hfi_version = HFI_VERSION_3XX,
+ .vmem_id = VIDC_RESOURCE_NONE,
+ .vmem_size = 0,
+ .vmem_addr = 0,
+ .cp_start = 0,
+ .cp_size = 0x79000000,
+ .cp_nonpixel_start = 0x1000000,
+ .cp_nonpixel_size = 0x28000000,
+ .dma_mask = 0xd9000000 - 1,
+ .fwname = "qcom/venus-4.4/venus.mdt",
+};
+
static const struct freq_tbl sc7180_freq_table[] = {
{ 0, 500000000 },
{ 0, 434000000 },
@@ -613,6 +678,7 @@ static const struct venus_resources sc7180_res = {
static const struct of_device_id venus_dt_match[] = {
{ .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
{ .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
+ { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, },
{ .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
{ .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
{ .compatible = "qcom,sc7180-venus", .data = &sc7180_res, },
--
2.29.2

Subject: Re: [PATCH 1/2] media: venus: core: Add sdm660 DT compatible and resource struct

Il 18/01/21 18:21, Stanimir Varbanov ha scritto:
> Hi Angelo,
>
> Thanks for the patch!
>
> On 1/15/21 8:52 PM, AngeloGioacchino Del Regno wrote:
>> Add the SDM660 DT compatible and its resource structure, also
>> including support for the Venus pmdomains, in order to support
>> the Venus block in SDM630, SDM636, SDM660 and SDA variants.
>>
>> This SoC features Venus 4.4 (HFI3XX), with one vcodec used for
>> both encoding and decoding, switched on through two GDSCs.
>> The core clock for this Venus chip is powered by the RPM VDD_CX
>> power domain.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
>> ---
>> drivers/media/platform/qcom/venus/core.c | 66 ++++++++++++++++++++++++
>> 1 file changed, 66 insertions(+)
>>
>> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
>> index bdd293faaad0..83ca86a63241 100644
>> --- a/drivers/media/platform/qcom/venus/core.c
>> +++ b/drivers/media/platform/qcom/venus/core.c
>> @@ -565,6 +565,71 @@ static const struct venus_resources sdm845_res_v2 = {
>> .fwname = "qcom/venus-5.2/venus.mdt",
>> };
>>
>> +static const struct freq_tbl sdm660_freq_table[] = {
>> + { 0, 518400000 },
>> + { 0, 441600000 },
>> + { 0, 404000000 },
>> + { 0, 320000000 },
>> + { 0, 269330000 },
>> + { 0, 133330000 },
>> +};
>> +
>> +static const struct reg_val sdm660_reg_preset[] = {
>> + { 0x80010, 0x001f001f },
>> + { 0x80018, 0x00000156 },
>> + { 0x8001C, 0x00000156 },
>> +};
>> +
>> +static const struct bw_tbl sdm660_bw_table_enc[] = {
>> + { 979200, 1044000, 0, 2446336, 0 }, /* 4k UHD @ 30 */
>> + { 864000, 887000, 0, 2108416, 0 }, /* 720p @ 240 */
>> + { 489600, 666000, 0, 1207296, 0 }, /* 1080p @ 60 */
>> + { 432000, 578000, 0, 1058816, 0 }, /* 720p @ 120 */
>> + { 244800, 346000, 0, 616448, 0 }, /* 1080p @ 30 */
>> + { 216000, 293000, 0, 534528, 0 }, /* 720p @ 60 */
>> + { 108000, 151000, 0, 271360, 0 }, /* 720p @ 30 */
>> +};
>> +
>> +static const struct bw_tbl sdm660_bw_table_dec[] = {
>> + { 979200, 2365000, 0, 1892000, 0 }, /* 4k UHD @ 30 */
>> + { 864000, 1978000, 0, 1554000, 0 }, /* 720p @ 240 */
>> + { 489600, 1133000, 0, 895000, 0 }, /* 1080p @ 60 */
>> + { 432000, 994000, 0, 781000, 0 }, /* 720p @ 120 */
>> + { 244800, 580000, 0, 460000, 0 }, /* 1080p @ 30 */
>> + { 216000, 501000, 0, 301000, 0 }, /* 720p @ 60 */
>> + { 108000, 255000, 0, 202000, 0 }, /* 720p @ 30 */
>> +};
>> +
>> +static const struct venus_resources sdm660_res = {
>> + .freq_tbl = sdm660_freq_table,
>> + .freq_tbl_size = ARRAY_SIZE(sdm660_freq_table),
>> + .reg_tbl = sdm660_reg_preset,
>> + .reg_tbl_size = ARRAY_SIZE(sdm660_reg_preset),
>> + .bw_tbl_enc = sdm660_bw_table_enc,
>> + .bw_tbl_enc_size = ARRAY_SIZE(sdm660_bw_table_enc),
>> + .bw_tbl_dec = sdm660_bw_table_dec,
>> + .bw_tbl_dec_size = ARRAY_SIZE(sdm660_bw_table_dec),
>> + .clks = {"core", "iface", "bus_throttle", "bus" },
>> + .clks_num = 4,
>> + .vcodec0_clks = { "vcodec0_core" },
>> + .vcodec_clks_num = 1,
>> + .vcodec_pmdomains = { "venus", "vcodec0" },
>> + .vcodec_pmdomains_num = 2,
>> + .opp_pmdomain = (const char *[]) { "cx", NULL },
>> + .vcodec_num = 1,
>> + .max_load = 1036800,
>> + .hfi_version = HFI_VERSION_3XX,
>> + .vmem_id = VIDC_RESOURCE_NONE,
>> + .vmem_size = 0,
>> + .vmem_addr = 0,
>> + .cp_start = 0,
>> + .cp_size = 0x79000000,
>> + .cp_nonpixel_start = 0x1000000,
>> + .cp_nonpixel_size = 0x28000000,
>> + .dma_mask = 0xd9000000 - 1,
>> + .fwname = "qcom/venus-4.4/venus.mdt",
>
> Did you try venus-4.2 firmware from linux-firmware tree [1] ?
>

No I haven't.. and I can't... my Sony devices (but I think that this is
a practice of all OEMs/ODMs) are using a Sony signed venus firmware, so
I am totally limited to use the firmware that comes with the device.

Besides that, the version is still different so, even if I had any
possibility to try that, I don't think that it would work anyway...

>> +};
>> +
>> static const struct freq_tbl sc7180_freq_table[] = {
>> { 0, 500000000 },
>> { 0, 434000000 },
>> @@ -613,6 +678,7 @@ static const struct venus_resources sc7180_res = {
>> static const struct of_device_id venus_dt_match[] = {
>> { .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
>> { .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
>> + { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, },
>> { .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
>> { .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
>> { .compatible = "qcom,sc7180-venus", .data = &sc7180_res, },
>>
>
> Reviewed-by: Stanimir Varbanov <[email protected]>
>

Thank you!
- Angelo

2021-01-19 04:54:26

by Stanimir Varbanov

[permalink] [raw]
Subject: Re: [PATCH 1/2] media: venus: core: Add sdm660 DT compatible and resource struct

Hi Angelo,

Thanks for the patch!

On 1/15/21 8:52 PM, AngeloGioacchino Del Regno wrote:
> Add the SDM660 DT compatible and its resource structure, also
> including support for the Venus pmdomains, in order to support
> the Venus block in SDM630, SDM636, SDM660 and SDA variants.
>
> This SoC features Venus 4.4 (HFI3XX), with one vcodec used for
> both encoding and decoding, switched on through two GDSCs.
> The core clock for this Venus chip is powered by the RPM VDD_CX
> power domain.
>
> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
> ---
> drivers/media/platform/qcom/venus/core.c | 66 ++++++++++++++++++++++++
> 1 file changed, 66 insertions(+)
>
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index bdd293faaad0..83ca86a63241 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -565,6 +565,71 @@ static const struct venus_resources sdm845_res_v2 = {
> .fwname = "qcom/venus-5.2/venus.mdt",
> };
>
> +static const struct freq_tbl sdm660_freq_table[] = {
> + { 0, 518400000 },
> + { 0, 441600000 },
> + { 0, 404000000 },
> + { 0, 320000000 },
> + { 0, 269330000 },
> + { 0, 133330000 },
> +};
> +
> +static const struct reg_val sdm660_reg_preset[] = {
> + { 0x80010, 0x001f001f },
> + { 0x80018, 0x00000156 },
> + { 0x8001C, 0x00000156 },
> +};
> +
> +static const struct bw_tbl sdm660_bw_table_enc[] = {
> + { 979200, 1044000, 0, 2446336, 0 }, /* 4k UHD @ 30 */
> + { 864000, 887000, 0, 2108416, 0 }, /* 720p @ 240 */
> + { 489600, 666000, 0, 1207296, 0 }, /* 1080p @ 60 */
> + { 432000, 578000, 0, 1058816, 0 }, /* 720p @ 120 */
> + { 244800, 346000, 0, 616448, 0 }, /* 1080p @ 30 */
> + { 216000, 293000, 0, 534528, 0 }, /* 720p @ 60 */
> + { 108000, 151000, 0, 271360, 0 }, /* 720p @ 30 */
> +};
> +
> +static const struct bw_tbl sdm660_bw_table_dec[] = {
> + { 979200, 2365000, 0, 1892000, 0 }, /* 4k UHD @ 30 */
> + { 864000, 1978000, 0, 1554000, 0 }, /* 720p @ 240 */
> + { 489600, 1133000, 0, 895000, 0 }, /* 1080p @ 60 */
> + { 432000, 994000, 0, 781000, 0 }, /* 720p @ 120 */
> + { 244800, 580000, 0, 460000, 0 }, /* 1080p @ 30 */
> + { 216000, 501000, 0, 301000, 0 }, /* 720p @ 60 */
> + { 108000, 255000, 0, 202000, 0 }, /* 720p @ 30 */
> +};
> +
> +static const struct venus_resources sdm660_res = {
> + .freq_tbl = sdm660_freq_table,
> + .freq_tbl_size = ARRAY_SIZE(sdm660_freq_table),
> + .reg_tbl = sdm660_reg_preset,
> + .reg_tbl_size = ARRAY_SIZE(sdm660_reg_preset),
> + .bw_tbl_enc = sdm660_bw_table_enc,
> + .bw_tbl_enc_size = ARRAY_SIZE(sdm660_bw_table_enc),
> + .bw_tbl_dec = sdm660_bw_table_dec,
> + .bw_tbl_dec_size = ARRAY_SIZE(sdm660_bw_table_dec),
> + .clks = {"core", "iface", "bus_throttle", "bus" },
> + .clks_num = 4,
> + .vcodec0_clks = { "vcodec0_core" },
> + .vcodec_clks_num = 1,
> + .vcodec_pmdomains = { "venus", "vcodec0" },
> + .vcodec_pmdomains_num = 2,
> + .opp_pmdomain = (const char *[]) { "cx", NULL },
> + .vcodec_num = 1,
> + .max_load = 1036800,
> + .hfi_version = HFI_VERSION_3XX,
> + .vmem_id = VIDC_RESOURCE_NONE,
> + .vmem_size = 0,
> + .vmem_addr = 0,
> + .cp_start = 0,
> + .cp_size = 0x79000000,
> + .cp_nonpixel_start = 0x1000000,
> + .cp_nonpixel_size = 0x28000000,
> + .dma_mask = 0xd9000000 - 1,
> + .fwname = "qcom/venus-4.4/venus.mdt",

Did you try venus-4.2 firmware from linux-firmware tree [1] ?

> +};
> +
> static const struct freq_tbl sc7180_freq_table[] = {
> { 0, 500000000 },
> { 0, 434000000 },
> @@ -613,6 +678,7 @@ static const struct venus_resources sc7180_res = {
> static const struct of_device_id venus_dt_match[] = {
> { .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
> { .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
> + { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, },
> { .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
> { .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
> { .compatible = "qcom,sc7180-venus", .data = &sc7180_res, },
>

Reviewed-by: Stanimir Varbanov <[email protected]>

--
regards,
Stan

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qcom/venus-4.2

2021-01-25 11:13:32

by Hans Verkuil

[permalink] [raw]
Subject: Re: [PATCH 1/2] media: venus: core: Add sdm660 DT compatible and resource struct

On 18/01/2021 18:45, AngeloGioacchino Del Regno wrote:
> Il 18/01/21 18:21, Stanimir Varbanov ha scritto:
>> Hi Angelo,
>>
>> Thanks for the patch!
>>
>> On 1/15/21 8:52 PM, AngeloGioacchino Del Regno wrote:
>>> Add the SDM660 DT compatible and its resource structure, also
>>> including support for the Venus pmdomains, in order to support
>>> the Venus block in SDM630, SDM636, SDM660 and SDA variants.
>>>
>>> This SoC features Venus 4.4 (HFI3XX), with one vcodec used for
>>> both encoding and decoding, switched on through two GDSCs.
>>> The core clock for this Venus chip is powered by the RPM VDD_CX
>>> power domain.
>>>
>>> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
>>> ---
>>> drivers/media/platform/qcom/venus/core.c | 66 ++++++++++++++++++++++++
>>> 1 file changed, 66 insertions(+)
>>>
>>> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
>>> index bdd293faaad0..83ca86a63241 100644
>>> --- a/drivers/media/platform/qcom/venus/core.c
>>> +++ b/drivers/media/platform/qcom/venus/core.c
>>> @@ -565,6 +565,71 @@ static const struct venus_resources sdm845_res_v2 = {
>>> .fwname = "qcom/venus-5.2/venus.mdt",
>>> };
>>>
>>> +static const struct freq_tbl sdm660_freq_table[] = {
>>> + { 0, 518400000 },
>>> + { 0, 441600000 },
>>> + { 0, 404000000 },
>>> + { 0, 320000000 },
>>> + { 0, 269330000 },
>>> + { 0, 133330000 },
>>> +};
>>> +
>>> +static const struct reg_val sdm660_reg_preset[] = {
>>> + { 0x80010, 0x001f001f },
>>> + { 0x80018, 0x00000156 },
>>> + { 0x8001C, 0x00000156 },
>>> +};
>>> +
>>> +static const struct bw_tbl sdm660_bw_table_enc[] = {
>>> + { 979200, 1044000, 0, 2446336, 0 }, /* 4k UHD @ 30 */
>>> + { 864000, 887000, 0, 2108416, 0 }, /* 720p @ 240 */
>>> + { 489600, 666000, 0, 1207296, 0 }, /* 1080p @ 60 */
>>> + { 432000, 578000, 0, 1058816, 0 }, /* 720p @ 120 */
>>> + { 244800, 346000, 0, 616448, 0 }, /* 1080p @ 30 */
>>> + { 216000, 293000, 0, 534528, 0 }, /* 720p @ 60 */
>>> + { 108000, 151000, 0, 271360, 0 }, /* 720p @ 30 */
>>> +};
>>> +
>>> +static const struct bw_tbl sdm660_bw_table_dec[] = {
>>> + { 979200, 2365000, 0, 1892000, 0 }, /* 4k UHD @ 30 */
>>> + { 864000, 1978000, 0, 1554000, 0 }, /* 720p @ 240 */
>>> + { 489600, 1133000, 0, 895000, 0 }, /* 1080p @ 60 */
>>> + { 432000, 994000, 0, 781000, 0 }, /* 720p @ 120 */
>>> + { 244800, 580000, 0, 460000, 0 }, /* 1080p @ 30 */
>>> + { 216000, 501000, 0, 301000, 0 }, /* 720p @ 60 */
>>> + { 108000, 255000, 0, 202000, 0 }, /* 720p @ 30 */
>>> +};
>>> +
>>> +static const struct venus_resources sdm660_res = {
>>> + .freq_tbl = sdm660_freq_table,
>>> + .freq_tbl_size = ARRAY_SIZE(sdm660_freq_table),
>>> + .reg_tbl = sdm660_reg_preset,
>>> + .reg_tbl_size = ARRAY_SIZE(sdm660_reg_preset),
>>> + .bw_tbl_enc = sdm660_bw_table_enc,
>>> + .bw_tbl_enc_size = ARRAY_SIZE(sdm660_bw_table_enc),
>>> + .bw_tbl_dec = sdm660_bw_table_dec,
>>> + .bw_tbl_dec_size = ARRAY_SIZE(sdm660_bw_table_dec),
>>> + .clks = {"core", "iface", "bus_throttle", "bus" },
>>> + .clks_num = 4,
>>> + .vcodec0_clks = { "vcodec0_core" },
>>> + .vcodec_clks_num = 1,
>>> + .vcodec_pmdomains = { "venus", "vcodec0" },
>>> + .vcodec_pmdomains_num = 2,
>>> + .opp_pmdomain = (const char *[]) { "cx", NULL },
>>> + .vcodec_num = 1,
>>> + .max_load = 1036800,
>>> + .hfi_version = HFI_VERSION_3XX,
>>> + .vmem_id = VIDC_RESOURCE_NONE,
>>> + .vmem_size = 0,
>>> + .vmem_addr = 0,
>>> + .cp_start = 0,
>>> + .cp_size = 0x79000000,
>>> + .cp_nonpixel_start = 0x1000000,
>>> + .cp_nonpixel_size = 0x28000000,
>>> + .dma_mask = 0xd9000000 - 1,
>>> + .fwname = "qcom/venus-4.4/venus.mdt",
>>
>> Did you try venus-4.2 firmware from linux-firmware tree [1] ?
>>
>
> No I haven't.. and I can't... my Sony devices (but I think that this is
> a practice of all OEMs/ODMs) are using a Sony signed venus firmware, so
> I am totally limited to use the firmware that comes with the device.
>
> Besides that, the version is still different so, even if I had any
> possibility to try that, I don't think that it would work anyway...

I'm a bit confused. "qcom/venus-4.4/venus.mdt" is the Sony signed FW?

This patch can't be merged unless there is a corresponding firmware available
in linux-firmware. Is the current 4.2 firmware in linux-firmware signed by
Qualcomm? Can they provided 4.4 firmware as well?

I have no idea how this works for the venus driver, but I hope Stanimir does.

Regards,

Hans

>
>>> +};
>>> +
>>> static const struct freq_tbl sc7180_freq_table[] = {
>>> { 0, 500000000 },
>>> { 0, 434000000 },
>>> @@ -613,6 +678,7 @@ static const struct venus_resources sc7180_res = {
>>> static const struct of_device_id venus_dt_match[] = {
>>> { .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
>>> { .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
>>> + { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, },
>>> { .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
>>> { .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
>>> { .compatible = "qcom,sc7180-venus", .data = &sc7180_res, },
>>>
>>
>> Reviewed-by: Stanimir Varbanov <[email protected]>
>>
>
> Thank you!
> - Angelo
>

Subject: Re: [PATCH 1/2] media: venus: core: Add sdm660 DT compatible and resource struct

Il 25/01/21 11:40, Hans Verkuil ha scritto:
> On 18/01/2021 18:45, AngeloGioacchino Del Regno wrote:
>> Il 18/01/21 18:21, Stanimir Varbanov ha scritto:
>>> Hi Angelo,
>>>
>>> Thanks for the patch!
>>>
>>> On 1/15/21 8:52 PM, AngeloGioacchino Del Regno wrote:
>>>> Add the SDM660 DT compatible and its resource structure, also
>>>> including support for the Venus pmdomains, in order to support
>>>> the Venus block in SDM630, SDM636, SDM660 and SDA variants.
>>>>
>>>> This SoC features Venus 4.4 (HFI3XX), with one vcodec used for
>>>> both encoding and decoding, switched on through two GDSCs.
>>>> The core clock for this Venus chip is powered by the RPM VDD_CX
>>>> power domain.
>>>>
>>>> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
>>>> ---
>>>> drivers/media/platform/qcom/venus/core.c | 66 ++++++++++++++++++++++++
>>>> 1 file changed, 66 insertions(+)
>>>>
>>>> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
>>>> index bdd293faaad0..83ca86a63241 100644
>>>> --- a/drivers/media/platform/qcom/venus/core.c
>>>> +++ b/drivers/media/platform/qcom/venus/core.c
>>>> @@ -565,6 +565,71 @@ static const struct venus_resources sdm845_res_v2 = {
>>>> .fwname = "qcom/venus-5.2/venus.mdt",
>>>> };
>>>>
>>>> +static const struct freq_tbl sdm660_freq_table[] = {
>>>> + { 0, 518400000 },
>>>> + { 0, 441600000 },
>>>> + { 0, 404000000 },
>>>> + { 0, 320000000 },
>>>> + { 0, 269330000 },
>>>> + { 0, 133330000 },
>>>> +};
>>>> +
>>>> +static const struct reg_val sdm660_reg_preset[] = {
>>>> + { 0x80010, 0x001f001f },
>>>> + { 0x80018, 0x00000156 },
>>>> + { 0x8001C, 0x00000156 },
>>>> +};
>>>> +
>>>> +static const struct bw_tbl sdm660_bw_table_enc[] = {
>>>> + { 979200, 1044000, 0, 2446336, 0 }, /* 4k UHD @ 30 */
>>>> + { 864000, 887000, 0, 2108416, 0 }, /* 720p @ 240 */
>>>> + { 489600, 666000, 0, 1207296, 0 }, /* 1080p @ 60 */
>>>> + { 432000, 578000, 0, 1058816, 0 }, /* 720p @ 120 */
>>>> + { 244800, 346000, 0, 616448, 0 }, /* 1080p @ 30 */
>>>> + { 216000, 293000, 0, 534528, 0 }, /* 720p @ 60 */
>>>> + { 108000, 151000, 0, 271360, 0 }, /* 720p @ 30 */
>>>> +};
>>>> +
>>>> +static const struct bw_tbl sdm660_bw_table_dec[] = {
>>>> + { 979200, 2365000, 0, 1892000, 0 }, /* 4k UHD @ 30 */
>>>> + { 864000, 1978000, 0, 1554000, 0 }, /* 720p @ 240 */
>>>> + { 489600, 1133000, 0, 895000, 0 }, /* 1080p @ 60 */
>>>> + { 432000, 994000, 0, 781000, 0 }, /* 720p @ 120 */
>>>> + { 244800, 580000, 0, 460000, 0 }, /* 1080p @ 30 */
>>>> + { 216000, 501000, 0, 301000, 0 }, /* 720p @ 60 */
>>>> + { 108000, 255000, 0, 202000, 0 }, /* 720p @ 30 */
>>>> +};
>>>> +
>>>> +static const struct venus_resources sdm660_res = {
>>>> + .freq_tbl = sdm660_freq_table,
>>>> + .freq_tbl_size = ARRAY_SIZE(sdm660_freq_table),
>>>> + .reg_tbl = sdm660_reg_preset,
>>>> + .reg_tbl_size = ARRAY_SIZE(sdm660_reg_preset),
>>>> + .bw_tbl_enc = sdm660_bw_table_enc,
>>>> + .bw_tbl_enc_size = ARRAY_SIZE(sdm660_bw_table_enc),
>>>> + .bw_tbl_dec = sdm660_bw_table_dec,
>>>> + .bw_tbl_dec_size = ARRAY_SIZE(sdm660_bw_table_dec),
>>>> + .clks = {"core", "iface", "bus_throttle", "bus" },
>>>> + .clks_num = 4,
>>>> + .vcodec0_clks = { "vcodec0_core" },
>>>> + .vcodec_clks_num = 1,
>>>> + .vcodec_pmdomains = { "venus", "vcodec0" },
>>>> + .vcodec_pmdomains_num = 2,
>>>> + .opp_pmdomain = (const char *[]) { "cx", NULL },
>>>> + .vcodec_num = 1,
>>>> + .max_load = 1036800,
>>>> + .hfi_version = HFI_VERSION_3XX,
>>>> + .vmem_id = VIDC_RESOURCE_NONE,
>>>> + .vmem_size = 0,
>>>> + .vmem_addr = 0,
>>>> + .cp_start = 0,
>>>> + .cp_size = 0x79000000,
>>>> + .cp_nonpixel_start = 0x1000000,
>>>> + .cp_nonpixel_size = 0x28000000,
>>>> + .dma_mask = 0xd9000000 - 1,
>>>> + .fwname = "qcom/venus-4.4/venus.mdt",
>>>
>>> Did you try venus-4.2 firmware from linux-firmware tree [1] ?
>>>
>>
>> No I haven't.. and I can't... my Sony devices (but I think that this is
>> a practice of all OEMs/ODMs) are using a Sony signed venus firmware, so
>> I am totally limited to use the firmware that comes with the device.
>>
>> Besides that, the version is still different so, even if I had any
>> possibility to try that, I don't think that it would work anyway...

Hello!

>
> I'm a bit confused. "qcom/venus-4.4/venus.mdt" is the Sony signed FW?
>

In my case it is, but this follows the generic firmware path as was done
for all the other Venus firmwares, so my code is not pointing at Sony
specific things, but just generic ones.

Every Qualcomm-powered consumer device (smartphones, tablets etc) have
got a double sigcheck: one for qcom, one for OEM specific and most of
the times the TZ is configured to accept only firmwares that also have
the OEM signature.

This is not true for all the firmwares - for example, Adreno has this
mechanism only for the ZAP part - but unfortunately I'm not aware of
any consumer device accepting a Venus firmware with the "generic"
Qualcomm signature only (so - without the OEM signature).

Short answer:
1. qcom/venus-4.4/venus.mdt is a generic firmware for Venus
2. 99% of the people needs a different firmware for signature issues


> This patch can't be merged unless there is a corresponding firmware available
> in linux-firmware. Is the current 4.2 firmware in linux-firmware signed by
> Qualcomm? Can they provided 4.4 firmware as well?
>

If there is such issue, then maybe we should do "something" about it: I
would then propose to remove all references to fwname and just get this
done in DT, where every qcom board already specifies its own path for
its own firmware.

In any case, the issue that you're raising here has been raised multiple
times on LKML, I don't precisely remember, but I recall seeing this for
something like 4 years (or even more) being raised every now and then...

> I have no idea how this works for the venus driver, but I hope Stanimir does.
>

As far as I've understood, this driver just uses the firmware which
path is hardcoded in fwname, even though at this point I would like
to get an opinion from Stanimir.

Would you be ok if we start parsing firmware-name from DT for this
driver? The flow would be something like:

Is firmware-name DT property present?
Yes -> Use FW path from firmware-name property
No -> Use the FW path from the fwname field of struct
venus_resources

This is a common flow in at least freedreno and remoteproc (modem).

-- Angelo

> Regards,
>
> Hans
>
>>
>>>> +};
>>>> +
>>>> static const struct freq_tbl sc7180_freq_table[] = {
>>>> { 0, 500000000 },
>>>> { 0, 434000000 },
>>>> @@ -613,6 +678,7 @@ static const struct venus_resources sc7180_res = {
>>>> static const struct of_device_id venus_dt_match[] = {
>>>> { .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
>>>> { .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
>>>> + { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, },
>>>> { .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
>>>> { .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
>>>> { .compatible = "qcom,sc7180-venus", .data = &sc7180_res, },
>>>>
>>>
>>> Reviewed-by: Stanimir Varbanov <[email protected]>
>>>
>>
>> Thank you!
>> - Angelo
>>
>

2021-01-26 07:29:52

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH 1/2] media: venus: core: Add sdm660 DT compatible and resource struct

On Mon 25 Jan 08:51 CST 2021, AngeloGioacchino Del Regno wrote:

> Il 25/01/21 11:40, Hans Verkuil ha scritto:
> > On 18/01/2021 18:45, AngeloGioacchino Del Regno wrote:
> > > Il 18/01/21 18:21, Stanimir Varbanov ha scritto:
> > > > > diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
[..]
> > > > > + .fwname = "qcom/venus-4.4/venus.mdt",
[..]
> > This patch can't be merged unless there is a corresponding firmware available
> > in linux-firmware. Is the current 4.2 firmware in linux-firmware signed by
> > Qualcomm? Can they provided 4.4 firmware as well?
> >
>
> If there is such issue, then maybe we should do "something" about it: I
> would then propose to remove all references to fwname and just get this
> done in DT, where every qcom board already specifies its own path for
> its own firmware.
>

We have the same problem with production devices on e.g. SDM845, where
the firmware referenced by fw_name and present in linux-firmware won't
work on any real devices.

As such, providing means for specifying the firmware name in DT would be
a very reasonable thing, and in line with how we handle this in other
subsystems (using the firmware-name property, containing the full
relative path).

Regards,
Bjorn

2021-01-26 17:42:13

by Hans Verkuil

[permalink] [raw]
Subject: Re: [PATCH 1/2] media: venus: core: Add sdm660 DT compatible and resource struct

On 25/01/2021 15:51, AngeloGioacchino Del Regno wrote:
> Il 25/01/21 11:40, Hans Verkuil ha scritto:
>> On 18/01/2021 18:45, AngeloGioacchino Del Regno wrote:
>>> Il 18/01/21 18:21, Stanimir Varbanov ha scritto:
>>>> Hi Angelo,
>>>>
>>>> Thanks for the patch!
>>>>
>>>> On 1/15/21 8:52 PM, AngeloGioacchino Del Regno wrote:
>>>>> Add the SDM660 DT compatible and its resource structure, also
>>>>> including support for the Venus pmdomains, in order to support
>>>>> the Venus block in SDM630, SDM636, SDM660 and SDA variants.
>>>>>
>>>>> This SoC features Venus 4.4 (HFI3XX), with one vcodec used for
>>>>> both encoding and decoding, switched on through two GDSCs.
>>>>> The core clock for this Venus chip is powered by the RPM VDD_CX
>>>>> power domain.
>>>>>
>>>>> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
>>>>> ---
>>>>> drivers/media/platform/qcom/venus/core.c | 66 ++++++++++++++++++++++++
>>>>> 1 file changed, 66 insertions(+)
>>>>>
>>>>> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
>>>>> index bdd293faaad0..83ca86a63241 100644
>>>>> --- a/drivers/media/platform/qcom/venus/core.c
>>>>> +++ b/drivers/media/platform/qcom/venus/core.c
>>>>> @@ -565,6 +565,71 @@ static const struct venus_resources sdm845_res_v2 = {
>>>>> .fwname = "qcom/venus-5.2/venus.mdt",
>>>>> };
>>>>>
>>>>> +static const struct freq_tbl sdm660_freq_table[] = {
>>>>> + { 0, 518400000 },
>>>>> + { 0, 441600000 },
>>>>> + { 0, 404000000 },
>>>>> + { 0, 320000000 },
>>>>> + { 0, 269330000 },
>>>>> + { 0, 133330000 },
>>>>> +};
>>>>> +
>>>>> +static const struct reg_val sdm660_reg_preset[] = {
>>>>> + { 0x80010, 0x001f001f },
>>>>> + { 0x80018, 0x00000156 },
>>>>> + { 0x8001C, 0x00000156 },
>>>>> +};
>>>>> +
>>>>> +static const struct bw_tbl sdm660_bw_table_enc[] = {
>>>>> + { 979200, 1044000, 0, 2446336, 0 }, /* 4k UHD @ 30 */
>>>>> + { 864000, 887000, 0, 2108416, 0 }, /* 720p @ 240 */
>>>>> + { 489600, 666000, 0, 1207296, 0 }, /* 1080p @ 60 */
>>>>> + { 432000, 578000, 0, 1058816, 0 }, /* 720p @ 120 */
>>>>> + { 244800, 346000, 0, 616448, 0 }, /* 1080p @ 30 */
>>>>> + { 216000, 293000, 0, 534528, 0 }, /* 720p @ 60 */
>>>>> + { 108000, 151000, 0, 271360, 0 }, /* 720p @ 30 */
>>>>> +};
>>>>> +
>>>>> +static const struct bw_tbl sdm660_bw_table_dec[] = {
>>>>> + { 979200, 2365000, 0, 1892000, 0 }, /* 4k UHD @ 30 */
>>>>> + { 864000, 1978000, 0, 1554000, 0 }, /* 720p @ 240 */
>>>>> + { 489600, 1133000, 0, 895000, 0 }, /* 1080p @ 60 */
>>>>> + { 432000, 994000, 0, 781000, 0 }, /* 720p @ 120 */
>>>>> + { 244800, 580000, 0, 460000, 0 }, /* 1080p @ 30 */
>>>>> + { 216000, 501000, 0, 301000, 0 }, /* 720p @ 60 */
>>>>> + { 108000, 255000, 0, 202000, 0 }, /* 720p @ 30 */
>>>>> +};
>>>>> +
>>>>> +static const struct venus_resources sdm660_res = {
>>>>> + .freq_tbl = sdm660_freq_table,
>>>>> + .freq_tbl_size = ARRAY_SIZE(sdm660_freq_table),
>>>>> + .reg_tbl = sdm660_reg_preset,
>>>>> + .reg_tbl_size = ARRAY_SIZE(sdm660_reg_preset),
>>>>> + .bw_tbl_enc = sdm660_bw_table_enc,
>>>>> + .bw_tbl_enc_size = ARRAY_SIZE(sdm660_bw_table_enc),
>>>>> + .bw_tbl_dec = sdm660_bw_table_dec,
>>>>> + .bw_tbl_dec_size = ARRAY_SIZE(sdm660_bw_table_dec),
>>>>> + .clks = {"core", "iface", "bus_throttle", "bus" },
>>>>> + .clks_num = 4,
>>>>> + .vcodec0_clks = { "vcodec0_core" },
>>>>> + .vcodec_clks_num = 1,
>>>>> + .vcodec_pmdomains = { "venus", "vcodec0" },
>>>>> + .vcodec_pmdomains_num = 2,
>>>>> + .opp_pmdomain = (const char *[]) { "cx", NULL },
>>>>> + .vcodec_num = 1,
>>>>> + .max_load = 1036800,
>>>>> + .hfi_version = HFI_VERSION_3XX,
>>>>> + .vmem_id = VIDC_RESOURCE_NONE,
>>>>> + .vmem_size = 0,
>>>>> + .vmem_addr = 0,
>>>>> + .cp_start = 0,
>>>>> + .cp_size = 0x79000000,
>>>>> + .cp_nonpixel_start = 0x1000000,
>>>>> + .cp_nonpixel_size = 0x28000000,
>>>>> + .dma_mask = 0xd9000000 - 1,
>>>>> + .fwname = "qcom/venus-4.4/venus.mdt",
>>>>
>>>> Did you try venus-4.2 firmware from linux-firmware tree [1] ?
>>>>
>>>
>>> No I haven't.. and I can't... my Sony devices (but I think that this is
>>> a practice of all OEMs/ODMs) are using a Sony signed venus firmware, so
>>> I am totally limited to use the firmware that comes with the device.
>>>
>>> Besides that, the version is still different so, even if I had any
>>> possibility to try that, I don't think that it would work anyway...
>
> Hello!
>
>>
>> I'm a bit confused. "qcom/venus-4.4/venus.mdt" is the Sony signed FW?
>>
>
> In my case it is, but this follows the generic firmware path as was done
> for all the other Venus firmwares, so my code is not pointing at Sony
> specific things, but just generic ones.
>
> Every Qualcomm-powered consumer device (smartphones, tablets etc) have
> got a double sigcheck: one for qcom, one for OEM specific and most of
> the times the TZ is configured to accept only firmwares that also have
> the OEM signature.
>
> This is not true for all the firmwares - for example, Adreno has this
> mechanism only for the ZAP part - but unfortunately I'm not aware of
> any consumer device accepting a Venus firmware with the "generic"
> Qualcomm signature only (so - without the OEM signature).
>
> Short answer:
> 1. qcom/venus-4.4/venus.mdt is a generic firmware for Venus

So can this FW be made available in the linux-firmware repo? Stanimir?

> 2. 99% of the people needs a different firmware for signature issues
>
>
>> This patch can't be merged unless there is a corresponding firmware available
>> in linux-firmware. Is the current 4.2 firmware in linux-firmware signed by
>> Qualcomm? Can they provided 4.4 firmware as well?
>>
>
> If there is such issue, then maybe we should do "something" about it: I
> would then propose to remove all references to fwname and just get this
> done in DT, where every qcom board already specifies its own path for
> its own firmware.
>
> In any case, the issue that you're raising here has been raised multiple
> times on LKML, I don't precisely remember, but I recall seeing this for
> something like 4 years (or even more) being raised every now and then...
>
>> I have no idea how this works for the venus driver, but I hope Stanimir does.
>>
>
> As far as I've understood, this driver just uses the firmware which
> path is hardcoded in fwname, even though at this point I would like
> to get an opinion from Stanimir.
>
> Would you be ok if we start parsing firmware-name from DT for this
> driver? The flow would be something like:
>
> Is firmware-name DT property present?
> Yes -> Use FW path from firmware-name property
> No -> Use the FW path from the fwname field of struct
> venus_resources
>
> This is a common flow in at least freedreno and remoteproc (modem).

I would have no problem with this, but it is up to Stanimir to decide.

Regards,

Hans

>
> -- Angelo
>
>> Regards,
>>
>> Hans
>>
>>>
>>>>> +};
>>>>> +
>>>>> static const struct freq_tbl sc7180_freq_table[] = {
>>>>> { 0, 500000000 },
>>>>> { 0, 434000000 },
>>>>> @@ -613,6 +678,7 @@ static const struct venus_resources sc7180_res = {
>>>>> static const struct of_device_id venus_dt_match[] = {
>>>>> { .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
>>>>> { .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
>>>>> + { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, },
>>>>> { .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
>>>>> { .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
>>>>> { .compatible = "qcom,sc7180-venus", .data = &sc7180_res, },
>>>>>
>>>>
>>>> Reviewed-by: Stanimir Varbanov <[email protected]>
>>>>
>>>
>>> Thank you!
>>> - Angelo
>>>
>>
>

2021-01-27 06:04:14

by Stanimir Varbanov

[permalink] [raw]
Subject: Re: [PATCH 1/2] media: venus: core: Add sdm660 DT compatible and resource struct



On 1/25/21 5:01 PM, Hans Verkuil wrote:
> On 25/01/2021 15:51, AngeloGioacchino Del Regno wrote:
>> Il 25/01/21 11:40, Hans Verkuil ha scritto:
>>> On 18/01/2021 18:45, AngeloGioacchino Del Regno wrote:
>>>> Il 18/01/21 18:21, Stanimir Varbanov ha scritto:
>>>>> Hi Angelo,
>>>>>
>>>>> Thanks for the patch!
>>>>>
>>>>> On 1/15/21 8:52 PM, AngeloGioacchino Del Regno wrote:
>>>>>> Add the SDM660 DT compatible and its resource structure, also
>>>>>> including support for the Venus pmdomains, in order to support
>>>>>> the Venus block in SDM630, SDM636, SDM660 and SDA variants.
>>>>>>
>>>>>> This SoC features Venus 4.4 (HFI3XX), with one vcodec used for
>>>>>> both encoding and decoding, switched on through two GDSCs.
>>>>>> The core clock for this Venus chip is powered by the RPM VDD_CX
>>>>>> power domain.
>>>>>>
>>>>>> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
>>>>>> ---
>>>>>> drivers/media/platform/qcom/venus/core.c | 66 ++++++++++++++++++++++++
>>>>>> 1 file changed, 66 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
>>>>>> index bdd293faaad0..83ca86a63241 100644
>>>>>> --- a/drivers/media/platform/qcom/venus/core.c
>>>>>> +++ b/drivers/media/platform/qcom/venus/core.c
>>>>>> @@ -565,6 +565,71 @@ static const struct venus_resources sdm845_res_v2 = {
>>>>>> .fwname = "qcom/venus-5.2/venus.mdt",
>>>>>> };
>>>>>>
>>>>>> +static const struct freq_tbl sdm660_freq_table[] = {
>>>>>> + { 0, 518400000 },
>>>>>> + { 0, 441600000 },
>>>>>> + { 0, 404000000 },
>>>>>> + { 0, 320000000 },
>>>>>> + { 0, 269330000 },
>>>>>> + { 0, 133330000 },
>>>>>> +};
>>>>>> +
>>>>>> +static const struct reg_val sdm660_reg_preset[] = {
>>>>>> + { 0x80010, 0x001f001f },
>>>>>> + { 0x80018, 0x00000156 },
>>>>>> + { 0x8001C, 0x00000156 },
>>>>>> +};
>>>>>> +
>>>>>> +static const struct bw_tbl sdm660_bw_table_enc[] = {
>>>>>> + { 979200, 1044000, 0, 2446336, 0 }, /* 4k UHD @ 30 */
>>>>>> + { 864000, 887000, 0, 2108416, 0 }, /* 720p @ 240 */
>>>>>> + { 489600, 666000, 0, 1207296, 0 }, /* 1080p @ 60 */
>>>>>> + { 432000, 578000, 0, 1058816, 0 }, /* 720p @ 120 */
>>>>>> + { 244800, 346000, 0, 616448, 0 }, /* 1080p @ 30 */
>>>>>> + { 216000, 293000, 0, 534528, 0 }, /* 720p @ 60 */
>>>>>> + { 108000, 151000, 0, 271360, 0 }, /* 720p @ 30 */
>>>>>> +};
>>>>>> +
>>>>>> +static const struct bw_tbl sdm660_bw_table_dec[] = {
>>>>>> + { 979200, 2365000, 0, 1892000, 0 }, /* 4k UHD @ 30 */
>>>>>> + { 864000, 1978000, 0, 1554000, 0 }, /* 720p @ 240 */
>>>>>> + { 489600, 1133000, 0, 895000, 0 }, /* 1080p @ 60 */
>>>>>> + { 432000, 994000, 0, 781000, 0 }, /* 720p @ 120 */
>>>>>> + { 244800, 580000, 0, 460000, 0 }, /* 1080p @ 30 */
>>>>>> + { 216000, 501000, 0, 301000, 0 }, /* 720p @ 60 */
>>>>>> + { 108000, 255000, 0, 202000, 0 }, /* 720p @ 30 */
>>>>>> +};
>>>>>> +
>>>>>> +static const struct venus_resources sdm660_res = {
>>>>>> + .freq_tbl = sdm660_freq_table,
>>>>>> + .freq_tbl_size = ARRAY_SIZE(sdm660_freq_table),
>>>>>> + .reg_tbl = sdm660_reg_preset,
>>>>>> + .reg_tbl_size = ARRAY_SIZE(sdm660_reg_preset),
>>>>>> + .bw_tbl_enc = sdm660_bw_table_enc,
>>>>>> + .bw_tbl_enc_size = ARRAY_SIZE(sdm660_bw_table_enc),
>>>>>> + .bw_tbl_dec = sdm660_bw_table_dec,
>>>>>> + .bw_tbl_dec_size = ARRAY_SIZE(sdm660_bw_table_dec),
>>>>>> + .clks = {"core", "iface", "bus_throttle", "bus" },
>>>>>> + .clks_num = 4,
>>>>>> + .vcodec0_clks = { "vcodec0_core" },
>>>>>> + .vcodec_clks_num = 1,
>>>>>> + .vcodec_pmdomains = { "venus", "vcodec0" },
>>>>>> + .vcodec_pmdomains_num = 2,
>>>>>> + .opp_pmdomain = (const char *[]) { "cx", NULL },
>>>>>> + .vcodec_num = 1,
>>>>>> + .max_load = 1036800,
>>>>>> + .hfi_version = HFI_VERSION_3XX,
>>>>>> + .vmem_id = VIDC_RESOURCE_NONE,
>>>>>> + .vmem_size = 0,
>>>>>> + .vmem_addr = 0,
>>>>>> + .cp_start = 0,
>>>>>> + .cp_size = 0x79000000,
>>>>>> + .cp_nonpixel_start = 0x1000000,
>>>>>> + .cp_nonpixel_size = 0x28000000,
>>>>>> + .dma_mask = 0xd9000000 - 1,
>>>>>> + .fwname = "qcom/venus-4.4/venus.mdt",
>>>>>
>>>>> Did you try venus-4.2 firmware from linux-firmware tree [1] ?
>>>>>
>>>>
>>>> No I haven't.. and I can't... my Sony devices (but I think that this is
>>>> a practice of all OEMs/ODMs) are using a Sony signed venus firmware, so
>>>> I am totally limited to use the firmware that comes with the device.
>>>>
>>>> Besides that, the version is still different so, even if I had any
>>>> possibility to try that, I don't think that it would work anyway...
>>
>> Hello!
>>
>>>
>>> I'm a bit confused. "qcom/venus-4.4/venus.mdt" is the Sony signed FW?
>>>
>>
>> In my case it is, but this follows the generic firmware path as was done
>> for all the other Venus firmwares, so my code is not pointing at Sony
>> specific things, but just generic ones.
>>
>> Every Qualcomm-powered consumer device (smartphones, tablets etc) have
>> got a double sigcheck: one for qcom, one for OEM specific and most of
>> the times the TZ is configured to accept only firmwares that also have
>> the OEM signature.
>>
>> This is not true for all the firmwares - for example, Adreno has this
>> mechanism only for the ZAP part - but unfortunately I'm not aware of
>> any consumer device accepting a Venus firmware with the "generic"
>> Qualcomm signature only (so - without the OEM signature).
>>
>> Short answer:
>> 1. qcom/venus-4.4/venus.mdt is a generic firmware for Venus
>
> So can this FW be made available in the linux-firmware repo? Stanimir?
>
>> 2. 99% of the people needs a different firmware for signature issues
>>
>>
>>> This patch can't be merged unless there is a corresponding firmware available
>>> in linux-firmware. Is the current 4.2 firmware in linux-firmware signed by
>>> Qualcomm? Can they provided 4.4 firmware as well?
>>>
>>
>> If there is such issue, then maybe we should do "something" about it: I
>> would then propose to remove all references to fwname and just get this
>> done in DT, where every qcom board already specifies its own path for
>> its own firmware.
>>
>> In any case, the issue that you're raising here has been raised multiple
>> times on LKML, I don't precisely remember, but I recall seeing this for
>> something like 4 years (or even more) being raised every now and then...
>>
>>> I have no idea how this works for the venus driver, but I hope Stanimir does.
>>>
>>
>> As far as I've understood, this driver just uses the firmware which
>> path is hardcoded in fwname, even though at this point I would like
>> to get an opinion from Stanimir.
>>
>> Would you be ok if we start parsing firmware-name from DT for this
>> driver? The flow would be something like:
>>
>> Is firmware-name DT property present?
>> Yes -> Use FW path from firmware-name property
>> No -> Use the FW path from the fwname field of struct
>> venus_resources
>>
>> This is a common flow in at least freedreno and remoteproc (modem).
>
> I would have no problem with this, but it is up to Stanimir to decide.
>

I sent a patch for that. Thanks for raising this issue.

--
regards,
Stan