Some of the mipi dsi resets were called
IMX8MQ_RESET_MIPI_DIS_
instead of
IMX8MQ_RESET_MIPI_DSI_
Since they're DSI related this looks like a typo. This fixes the only in tree
user as well to not break bisecting.
Guido Günther (1):
dt-bindings: reset: Fix typo in imx8mq resets
drivers/reset/reset-imx7.c | 12 ++++++------
include/dt-bindings/reset/imx8mq-reset.h | 6 +++---
2 files changed, 9 insertions(+), 9 deletions(-)
--
2.20.1
Some of the mipi dsi resets were called
IMX8MQ_RESET_MIPI_DIS__
instead of
IMX8MQ_RESET_MIPI_DSI__
Since they're DSI related this looks like a typo. This fixes the
only in tree user as well to not break bisecting.
Signed-off-by: Guido Günther <[email protected]>
---
drivers/reset/reset-imx7.c | 12 ++++++------
include/dt-bindings/reset/imx8mq-reset.h | 6 +++---
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index 3ecd770f910b..1443a55a0c29 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -169,9 +169,9 @@ static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
[IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) },
[IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) },
[IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) },
- [IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
- [IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
- [IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
+ [IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
+ [IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
[IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR,
BIT(2) | BIT(1) },
[IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
@@ -220,9 +220,9 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev,
case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
- case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */
- case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */
- case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
value = assert ? 0 : bit;
diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h
index 57c592498aa0..bfa41b0e24f6 100644
--- a/include/dt-bindings/reset/imx8mq-reset.h
+++ b/include/dt-bindings/reset/imx8mq-reset.h
@@ -31,9 +31,9 @@
#define IMX8MQ_RESET_OTG2_PHY_RESET 20
#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21
#define IMX8MQ_RESET_MIPI_DSI_RESET_N 22
-#define IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N 23
-#define IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N 24
-#define IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N 25
+#define IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N 23
+#define IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N 24
+#define IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N 25
#define IMX8MQ_RESET_PCIEPHY 26
#define IMX8MQ_RESET_PCIEPHY_PERST 27
#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28
--
2.20.1
On Thu, 2019-08-01 at 10:20 +0200, Guido Günther wrote:
> Some of the mipi dsi resets were called
>
> IMX8MQ_RESET_MIPI_DIS__
>
> instead of
>
> IMX8MQ_RESET_MIPI_DSI__
>
> Since they're DSI related this looks like a typo. This fixes the
> only in tree user as well to not break bisecting.
>
> Signed-off-by: Guido Günther <[email protected]>
Thank you, this was a typo in the Rev.0 reference manual.
It has been fixed in Rev. 1.
Applied to reset/next with Lucas' R-b.
regards
Philipp