This patch serial is to update the supported format for fsl_asrc
and fix some format issue
Shengjiu Wang (4):
ASoC: fsl_asrc: Use in(out)put_format instead of in(out)put_word_width
ASoC: fsl_asrc: update supported sample format
ASoC: pcm_dmaengine: Extract snd_dmaengine_pcm_refine_runtime_hwparams
ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in i.MX8
changes in v2
- extract snd_dmaengine_pcm_set_runtime_hwparams in one
separate path.
- 4th patch depends on 3rd patch
changes in v3
- Fix build report by kbuild test robot <[email protected]>
- change snd_dmaengine_pcm_set_runtime_hwparams to
snd_dmaengine_pcm_refine_runtime_hwparams
changes in v4
- update according to Nicolin's comments.
changes in v5
- free asrc pair when error happens in patch 4/4
changes in v6
- ignore return value of snd_soc_set_runtime_hwparams in patch 4/4
include/sound/dmaengine_pcm.h | 5 ++
sound/core/pcm_dmaengine.c | 83 +++++++++++++++++++++++++++
sound/soc/fsl/fsl_asrc.c | 65 ++++++++++++++-------
sound/soc/fsl/fsl_asrc.h | 7 ++-
sound/soc/fsl/fsl_asrc_dma.c | 64 ++++++++++++++++++---
sound/soc/soc-generic-dmaengine-pcm.c | 61 ++------------------
6 files changed, 199 insertions(+), 86 deletions(-)
--
2.21.0
snd_pcm_format_t is more formal than enum asrc_word_width, which has
two property, width and physical width, which is more accurate than
enum asrc_word_width. So it is better to use in(out)put_format
instead of in(out)put_word_width.
Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 56 +++++++++++++++++++++++++++-------------
sound/soc/fsl/fsl_asrc.h | 4 +--
2 files changed, 40 insertions(+), 20 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index cfa40ef6b1ca..4d3804a1ea55 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -265,6 +265,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
struct asrc_config *config = pair->config;
struct fsl_asrc *asrc_priv = pair->asrc_priv;
enum asrc_pair_index index = pair->index;
+ enum asrc_word_width input_word_width;
+ enum asrc_word_width output_word_width;
u32 inrate, outrate, indiv, outdiv;
u32 clk_index[2], div[2];
int in, out, channels;
@@ -283,9 +285,32 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
return -EINVAL;
}
- /* Validate output width */
- if (config->output_word_width == ASRC_WIDTH_8_BIT) {
- pair_err("does not support 8bit width output\n");
+ switch (snd_pcm_format_width(config->input_format)) {
+ case 8:
+ input_word_width = ASRC_WIDTH_8_BIT;
+ break;
+ case 16:
+ input_word_width = ASRC_WIDTH_16_BIT;
+ break;
+ case 24:
+ input_word_width = ASRC_WIDTH_24_BIT;
+ break;
+ default:
+ pair_err("does not support this input format, %d\n",
+ config->input_format);
+ return -EINVAL;
+ }
+
+ switch (snd_pcm_format_width(config->output_format)) {
+ case 16:
+ output_word_width = ASRC_WIDTH_16_BIT;
+ break;
+ case 24:
+ output_word_width = ASRC_WIDTH_24_BIT;
+ break;
+ default:
+ pair_err("does not support this output format, %d\n",
+ config->output_format);
return -EINVAL;
}
@@ -383,8 +408,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
/* Implement word_width configurations */
regmap_update_bits(asrc_priv->regmap, REG_ASRMCR1(index),
ASRMCR1i_OW16_MASK | ASRMCR1i_IWD_MASK,
- ASRMCR1i_OW16(config->output_word_width) |
- ASRMCR1i_IWD(config->input_word_width));
+ ASRMCR1i_OW16(output_word_width) |
+ ASRMCR1i_IWD(input_word_width));
/* Enable BUFFER STALL */
regmap_update_bits(asrc_priv->regmap, REG_ASRMCR(index),
@@ -497,13 +522,13 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct fsl_asrc *asrc_priv = snd_soc_dai_get_drvdata(dai);
- int width = params_width(params);
struct snd_pcm_runtime *runtime = substream->runtime;
struct fsl_asrc_pair *pair = runtime->private_data;
unsigned int channels = params_channels(params);
unsigned int rate = params_rate(params);
struct asrc_config config;
- int word_width, ret;
+ snd_pcm_format_t format;
+ int ret;
ret = fsl_asrc_request_pair(channels, pair);
if (ret) {
@@ -513,15 +538,10 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
pair->config = &config;
- if (width == 16)
- width = ASRC_WIDTH_16_BIT;
- else
- width = ASRC_WIDTH_24_BIT;
-
if (asrc_priv->asrc_width == 16)
- word_width = ASRC_WIDTH_16_BIT;
+ format = SNDRV_PCM_FORMAT_S16_LE;
else
- word_width = ASRC_WIDTH_24_BIT;
+ format = SNDRV_PCM_FORMAT_S24_LE;
config.pair = pair->index;
config.channel_num = channels;
@@ -529,13 +549,13 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
config.outclk = OUTCLK_ASRCK1_CLK;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- config.input_word_width = width;
- config.output_word_width = word_width;
+ config.input_format = params_format(params);
+ config.output_format = format;
config.input_sample_rate = rate;
config.output_sample_rate = asrc_priv->asrc_rate;
} else {
- config.input_word_width = word_width;
- config.output_word_width = width;
+ config.input_format = format;
+ config.output_format = params_format(params);
config.input_sample_rate = asrc_priv->asrc_rate;
config.output_sample_rate = rate;
}
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index c60075112570..38af485bdd22 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -342,8 +342,8 @@ struct asrc_config {
unsigned int dma_buffer_size;
unsigned int input_sample_rate;
unsigned int output_sample_rate;
- enum asrc_word_width input_word_width;
- enum asrc_word_width output_word_width;
+ snd_pcm_format_t input_format;
+ snd_pcm_format_t output_format;
enum asrc_inclk inclk;
enum asrc_outclk outclk;
};
--
2.21.0
When set the runtime hardware parameters, we may need to query
the capability of DMA to complete the parameters.
This patch is to Extract this operation from
dmaengine_pcm_set_runtime_hwparams function to a separate function
snd_dmaengine_pcm_refine_runtime_hwparams, that other components
which need this feature can call this function.
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Nicolin Chen <[email protected]>
---
include/sound/dmaengine_pcm.h | 5 ++
sound/core/pcm_dmaengine.c | 83 +++++++++++++++++++++++++++
sound/soc/soc-generic-dmaengine-pcm.c | 61 ++------------------
3 files changed, 94 insertions(+), 55 deletions(-)
diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h
index c679f6116580..b65220685920 100644
--- a/include/sound/dmaengine_pcm.h
+++ b/include/sound/dmaengine_pcm.h
@@ -83,6 +83,11 @@ void snd_dmaengine_pcm_set_config_from_dai_data(
const struct snd_dmaengine_dai_dma_data *dma_data,
struct dma_slave_config *config);
+int snd_dmaengine_pcm_refine_runtime_hwparams(
+ struct snd_pcm_substream *substream,
+ struct snd_dmaengine_dai_dma_data *dma_data,
+ struct snd_pcm_hardware *hw,
+ struct dma_chan *chan);
/*
* Try to request the DMA channel using compat_request_channel or
diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
index 89a05926ac73..5749a8a49784 100644
--- a/sound/core/pcm_dmaengine.c
+++ b/sound/core/pcm_dmaengine.c
@@ -369,4 +369,87 @@ int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close_release_chan);
+/**
+ * snd_dmaengine_pcm_refine_runtime_hwparams - Refine runtime hw params
+ * @substream: PCM substream
+ * @dma_data: DAI DMA data
+ * @hw: PCM hw params
+ * @chan: DMA channel to use for data transfers
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function will query DMA capability, then refine the pcm hardware
+ * parameters.
+ */
+int snd_dmaengine_pcm_refine_runtime_hwparams(
+ struct snd_pcm_substream *substream,
+ struct snd_dmaengine_dai_dma_data *dma_data,
+ struct snd_pcm_hardware *hw,
+ struct dma_chan *chan)
+{
+ struct dma_slave_caps dma_caps;
+ u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ snd_pcm_format_t i;
+ int ret = 0;
+
+ if (!hw || !chan || !dma_data)
+ return -EINVAL;
+
+ ret = dma_get_slave_caps(chan, &dma_caps);
+ if (ret == 0) {
+ if (dma_caps.cmd_pause && dma_caps.cmd_resume)
+ hw->info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
+ if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
+ hw->info |= SNDRV_PCM_INFO_BATCH;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ addr_widths = dma_caps.dst_addr_widths;
+ else
+ addr_widths = dma_caps.src_addr_widths;
+ }
+
+ /*
+ * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
+ * hw.formats set to 0, meaning no restrictions are in place.
+ * In this case it's the responsibility of the DAI driver to
+ * provide the supported format information.
+ */
+ if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
+ /*
+ * Prepare formats mask for valid/allowed sample types. If the
+ * dma does not have support for the given physical word size,
+ * it needs to be masked out so user space can not use the
+ * format which produces corrupted audio.
+ * In case the dma driver does not implement the slave_caps the
+ * default assumption is that it supports 1, 2 and 4 bytes
+ * widths.
+ */
+ for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
+ int bits = snd_pcm_format_physical_width(i);
+
+ /*
+ * Enable only samples with DMA supported physical
+ * widths
+ */
+ switch (bits) {
+ case 8:
+ case 16:
+ case 24:
+ case 32:
+ case 64:
+ if (addr_widths & (1 << (bits / 8)))
+ hw->formats |= pcm_format_to_bits(i);
+ break;
+ default:
+ /* Unsupported types */
+ break;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_refine_runtime_hwparams);
+
MODULE_LICENSE("GPL");
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index 748f5f641002..b9f147eaf7c4 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -118,12 +118,7 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
struct device *dma_dev = dmaengine_dma_dev(pcm, substream);
struct dma_chan *chan = pcm->chan[substream->stream];
struct snd_dmaengine_dai_dma_data *dma_data;
- struct dma_slave_caps dma_caps;
struct snd_pcm_hardware hw;
- u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
- BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
- BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
- snd_pcm_format_t i;
int ret;
if (pcm->config && pcm->config->pcm_hardware)
@@ -145,56 +140,12 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
hw.info |= SNDRV_PCM_INFO_BATCH;
- ret = dma_get_slave_caps(chan, &dma_caps);
- if (ret == 0) {
- if (dma_caps.cmd_pause && dma_caps.cmd_resume)
- hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
- if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
- hw.info |= SNDRV_PCM_INFO_BATCH;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- addr_widths = dma_caps.dst_addr_widths;
- else
- addr_widths = dma_caps.src_addr_widths;
- }
-
- /*
- * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
- * hw.formats set to 0, meaning no restrictions are in place.
- * In this case it's the responsibility of the DAI driver to
- * provide the supported format information.
- */
- if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
- /*
- * Prepare formats mask for valid/allowed sample types. If the
- * dma does not have support for the given physical word size,
- * it needs to be masked out so user space can not use the
- * format which produces corrupted audio.
- * In case the dma driver does not implement the slave_caps the
- * default assumption is that it supports 1, 2 and 4 bytes
- * widths.
- */
- for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
- int bits = snd_pcm_format_physical_width(i);
-
- /*
- * Enable only samples with DMA supported physical
- * widths
- */
- switch (bits) {
- case 8:
- case 16:
- case 24:
- case 32:
- case 64:
- if (addr_widths & (1 << (bits / 8)))
- hw.formats |= pcm_format_to_bits(i);
- break;
- default:
- /* Unsupported types */
- break;
- }
- }
+ ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
+ dma_data,
+ &hw,
+ chan);
+ if (ret)
+ return ret;
return snd_soc_set_runtime_hwparams(substream, &hw);
}
--
2.21.0
There is error "aplay: pcm_write:2023: write error: Input/output error"
on i.MX8QM/i.MX8QXP platform for S24_3LE format.
In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit
sample, but we didn't add any constraint, that cause issues.
So we need to query the caps of dma, then update the hw parameters
according to the caps.
Signed-off-by: Shengjiu Wang <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 4 +--
sound/soc/fsl/fsl_asrc.h | 3 ++
sound/soc/fsl/fsl_asrc_dma.c | 64 ++++++++++++++++++++++++++++++++----
3 files changed, 62 insertions(+), 9 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 584badf956d2..0bf91a6f54b9 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -115,7 +115,7 @@ static void fsl_asrc_sel_proc(int inrate, int outrate,
* within range [ANCA, ANCA+ANCB-1], depends on the channels of pair A
* while pair A and pair C are comparatively independent.
*/
-static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
+int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
{
enum asrc_pair_index index = ASRC_INVALID_PAIR;
struct fsl_asrc *asrc_priv = pair->asrc_priv;
@@ -158,7 +158,7 @@ static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
*
* It clears the resource from asrc_priv and releases the occupied channels.
*/
-static void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
+void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
{
struct fsl_asrc *asrc_priv = pair->asrc_priv;
enum asrc_pair_index index = pair->index;
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 38af485bdd22..2b57e8c53728 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -462,4 +462,7 @@ struct fsl_asrc {
#define DRV_NAME "fsl-asrc-dai"
extern struct snd_soc_component_driver fsl_asrc_component;
struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir);
+int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair);
+void fsl_asrc_release_pair(struct fsl_asrc_pair *pair);
+
#endif /* _FSL_ASRC_H */
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index 01052a0808b0..2a60fc6142b1 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -16,13 +16,11 @@
#define FSL_ASRC_DMABUF_SIZE (256 * 1024)
-static const struct snd_pcm_hardware snd_imx_hardware = {
+static struct snd_pcm_hardware snd_imx_hardware = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_RESUME,
+ SNDRV_PCM_INFO_MMAP_VALID,
.buffer_bytes_max = FSL_ASRC_DMABUF_SIZE,
.period_bytes_min = 128,
.period_bytes_max = 65535, /* Limited by SDMA engine */
@@ -270,12 +268,25 @@ static int fsl_asrc_dma_hw_free(struct snd_pcm_substream *substream)
static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
{
+ bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
+ struct snd_dmaengine_dai_dma_data *dma_data;
struct device *dev = component->dev;
struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
struct fsl_asrc_pair *pair;
+ struct dma_chan *tmp_chan = NULL;
+ u8 dir = tx ? OUT : IN;
+ bool release_pair = true;
+ int ret = 0;
+
+ ret = snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0) {
+ dev_err(dev, "failed to set pcm hw params periods\n");
+ return ret;
+ }
pair = kzalloc(sizeof(struct fsl_asrc_pair), GFP_KERNEL);
if (!pair)
@@ -285,11 +296,50 @@ static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
runtime->private_data = pair;
- snd_pcm_hw_constraint_integer(substream->runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
+ /* Request a dummy pair, which will be released later.
+ * Request pair function needs channel num as input, for this
+ * dummy pair, we just request "1" channel temporarily.
+ */
+ ret = fsl_asrc_request_pair(1, pair);
+ if (ret < 0) {
+ dev_err(dev, "failed to request asrc pair\n");
+ goto req_pair_err;
+ }
+
+ /* Request a dummy dma channel, which will be released later. */
+ tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
+ if (!tmp_chan) {
+ dev_err(dev, "failed to get dma channel\n");
+ ret = -EINVAL;
+ goto dma_chan_err;
+ }
+
+ dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+ /* Refine the snd_imx_hardware according to caps of DMA. */
+ ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
+ dma_data,
+ &snd_imx_hardware,
+ tmp_chan);
+ if (ret < 0) {
+ dev_err(dev, "failed to refine runtime hwparams\n");
+ goto out;
+ }
+
+ release_pair = false;
snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
- return 0;
+out:
+ dma_release_channel(tmp_chan);
+
+dma_chan_err:
+ fsl_asrc_release_pair(pair);
+
+req_pair_err:
+ if (release_pair)
+ kfree(pair);
+
+ return ret;
}
static int fsl_asrc_dma_shutdown(struct snd_pcm_substream *substream)
--
2.21.0
The ASRC support 24bit/16bit/8bit input width, which is
data width, not slot width.
For the S20_3LE format, the data with is 20bit, slot width
is 24bit, if we set ASRMCR1n.IWD to be 24bits, the result
is the volume is lower than expected, it likes 24bit data
right shift 4 bits
So replace S20_3LE with S24_3LE in supported list and add S8
format in TX supported list
Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 4d3804a1ea55..584badf956d2 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -624,7 +624,7 @@ static int fsl_asrc_dai_probe(struct snd_soc_dai *dai)
#define FSL_ASRC_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S16_LE | \
- SNDRV_PCM_FMTBIT_S20_3LE)
+ SNDRV_PCM_FMTBIT_S24_3LE)
static struct snd_soc_dai_driver fsl_asrc_dai = {
.probe = fsl_asrc_dai_probe,
@@ -635,7 +635,8 @@ static struct snd_soc_dai_driver fsl_asrc_dai = {
.rate_min = 5512,
.rate_max = 192000,
.rates = SNDRV_PCM_RATE_KNOT,
- .formats = FSL_ASRC_FORMATS,
+ .formats = FSL_ASRC_FORMATS |
+ SNDRV_PCM_FMTBIT_S8,
},
.capture = {
.stream_name = "ASRC-Capture",
--
2.21.0
On Fri, Sep 27, 2019 at 09:46:12AM +0800, Shengjiu Wang wrote:
> There is error "aplay: pcm_write:2023: write error: Input/output error"
> on i.MX8QM/i.MX8QXP platform for S24_3LE format.
>
> In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit
> sample, but we didn't add any constraint, that cause issues.
>
> So we need to query the caps of dma, then update the hw parameters
> according to the caps.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
> ---
> sound/soc/fsl/fsl_asrc.c | 4 +--
> sound/soc/fsl/fsl_asrc.h | 3 ++
> sound/soc/fsl/fsl_asrc_dma.c | 64 ++++++++++++++++++++++++++++++++----
> 3 files changed, 62 insertions(+), 9 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index 584badf956d2..0bf91a6f54b9 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -115,7 +115,7 @@ static void fsl_asrc_sel_proc(int inrate, int outrate,
> * within range [ANCA, ANCA+ANCB-1], depends on the channels of pair A
> * while pair A and pair C are comparatively independent.
> */
> -static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
> +int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
> {
> enum asrc_pair_index index = ASRC_INVALID_PAIR;
> struct fsl_asrc *asrc_priv = pair->asrc_priv;
> @@ -158,7 +158,7 @@ static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
> *
> * It clears the resource from asrc_priv and releases the occupied channels.
> */
> -static void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
> +void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
> {
> struct fsl_asrc *asrc_priv = pair->asrc_priv;
> enum asrc_pair_index index = pair->index;
> diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
> index 38af485bdd22..2b57e8c53728 100644
> --- a/sound/soc/fsl/fsl_asrc.h
> +++ b/sound/soc/fsl/fsl_asrc.h
> @@ -462,4 +462,7 @@ struct fsl_asrc {
> #define DRV_NAME "fsl-asrc-dai"
> extern struct snd_soc_component_driver fsl_asrc_component;
> struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir);
> +int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair);
> +void fsl_asrc_release_pair(struct fsl_asrc_pair *pair);
> +
> #endif /* _FSL_ASRC_H */
> diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
> index 01052a0808b0..2a60fc6142b1 100644
> --- a/sound/soc/fsl/fsl_asrc_dma.c
> +++ b/sound/soc/fsl/fsl_asrc_dma.c
> @@ -16,13 +16,11 @@
>
> #define FSL_ASRC_DMABUF_SIZE (256 * 1024)
>
> -static const struct snd_pcm_hardware snd_imx_hardware = {
> +static struct snd_pcm_hardware snd_imx_hardware = {
> .info = SNDRV_PCM_INFO_INTERLEAVED |
> SNDRV_PCM_INFO_BLOCK_TRANSFER |
> SNDRV_PCM_INFO_MMAP |
> - SNDRV_PCM_INFO_MMAP_VALID |
> - SNDRV_PCM_INFO_PAUSE |
> - SNDRV_PCM_INFO_RESUME,
> + SNDRV_PCM_INFO_MMAP_VALID,
> .buffer_bytes_max = FSL_ASRC_DMABUF_SIZE,
> .period_bytes_min = 128,
> .period_bytes_max = 65535, /* Limited by SDMA engine */
> @@ -270,12 +268,25 @@ static int fsl_asrc_dma_hw_free(struct snd_pcm_substream *substream)
>
> static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
> {
> + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> struct snd_soc_pcm_runtime *rtd = substream->private_data;
> struct snd_pcm_runtime *runtime = substream->runtime;
> struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
> + struct snd_dmaengine_dai_dma_data *dma_data;
> struct device *dev = component->dev;
> struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
> struct fsl_asrc_pair *pair;
> + struct dma_chan *tmp_chan = NULL;
> + u8 dir = tx ? OUT : IN;
> + bool release_pair = true;
> + int ret = 0;
> +
> + ret = snd_pcm_hw_constraint_integer(substream->runtime,
> + SNDRV_PCM_HW_PARAM_PERIODS);
> + if (ret < 0) {
> + dev_err(dev, "failed to set pcm hw params periods\n");
> + return ret;
> + }
>
> pair = kzalloc(sizeof(struct fsl_asrc_pair), GFP_KERNEL);
> if (!pair)
> @@ -285,11 +296,50 @@ static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
>
> runtime->private_data = pair;
>
> - snd_pcm_hw_constraint_integer(substream->runtime,
> - SNDRV_PCM_HW_PARAM_PERIODS);
> + /* Request a dummy pair, which will be released later.
> + * Request pair function needs channel num as input, for this
> + * dummy pair, we just request "1" channel temporarily.
> + */
> + ret = fsl_asrc_request_pair(1, pair);
> + if (ret < 0) {
> + dev_err(dev, "failed to request asrc pair\n");
> + goto req_pair_err;
> + }
> +
> + /* Request a dummy dma channel, which will be released later. */
> + tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
> + if (!tmp_chan) {
> + dev_err(dev, "failed to get dma channel\n");
> + ret = -EINVAL;
> + goto dma_chan_err;
> + }
> +
> + dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
> +
> + /* Refine the snd_imx_hardware according to caps of DMA. */
> + ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
> + dma_data,
> + &snd_imx_hardware,
> + tmp_chan);
> + if (ret < 0) {
> + dev_err(dev, "failed to refine runtime hwparams\n");
> + goto out;
> + }
> +
> + release_pair = false;
> snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
>
> - return 0;
> +out:
> + dma_release_channel(tmp_chan);
> +
> +dma_chan_err:
> + fsl_asrc_release_pair(pair);
> +
> +req_pair_err:
> + if (release_pair)
> + kfree(pair);
> +
> + return ret;
> }
>
> static int fsl_asrc_dma_shutdown(struct snd_pcm_substream *substream)
> --
> 2.21.0
>
The patch
ASoC: pcm_dmaengine: Extract snd_dmaengine_pcm_refine_runtime_hwparams
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From e957204e732bc2916a241dc61dd7dd14e9a98350 Mon Sep 17 00:00:00 2001
From: Shengjiu Wang <[email protected]>
Date: Fri, 27 Sep 2019 09:46:11 +0800
Subject: [PATCH] ASoC: pcm_dmaengine: Extract
snd_dmaengine_pcm_refine_runtime_hwparams
When set the runtime hardware parameters, we may need to query
the capability of DMA to complete the parameters.
This patch is to Extract this operation from
dmaengine_pcm_set_runtime_hwparams function to a separate function
snd_dmaengine_pcm_refine_runtime_hwparams, that other components
which need this feature can call this function.
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/d728f65194e9978cbec4132b522d4fed420d704a.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <[email protected]>
---
include/sound/dmaengine_pcm.h | 5 ++
sound/core/pcm_dmaengine.c | 83 +++++++++++++++++++++++++++
sound/soc/soc-generic-dmaengine-pcm.c | 61 ++------------------
3 files changed, 94 insertions(+), 55 deletions(-)
diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h
index c679f6116580..b65220685920 100644
--- a/include/sound/dmaengine_pcm.h
+++ b/include/sound/dmaengine_pcm.h
@@ -83,6 +83,11 @@ void snd_dmaengine_pcm_set_config_from_dai_data(
const struct snd_dmaengine_dai_dma_data *dma_data,
struct dma_slave_config *config);
+int snd_dmaengine_pcm_refine_runtime_hwparams(
+ struct snd_pcm_substream *substream,
+ struct snd_dmaengine_dai_dma_data *dma_data,
+ struct snd_pcm_hardware *hw,
+ struct dma_chan *chan);
/*
* Try to request the DMA channel using compat_request_channel or
diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
index 89a05926ac73..5749a8a49784 100644
--- a/sound/core/pcm_dmaengine.c
+++ b/sound/core/pcm_dmaengine.c
@@ -369,4 +369,87 @@ int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close_release_chan);
+/**
+ * snd_dmaengine_pcm_refine_runtime_hwparams - Refine runtime hw params
+ * @substream: PCM substream
+ * @dma_data: DAI DMA data
+ * @hw: PCM hw params
+ * @chan: DMA channel to use for data transfers
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function will query DMA capability, then refine the pcm hardware
+ * parameters.
+ */
+int snd_dmaengine_pcm_refine_runtime_hwparams(
+ struct snd_pcm_substream *substream,
+ struct snd_dmaengine_dai_dma_data *dma_data,
+ struct snd_pcm_hardware *hw,
+ struct dma_chan *chan)
+{
+ struct dma_slave_caps dma_caps;
+ u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ snd_pcm_format_t i;
+ int ret = 0;
+
+ if (!hw || !chan || !dma_data)
+ return -EINVAL;
+
+ ret = dma_get_slave_caps(chan, &dma_caps);
+ if (ret == 0) {
+ if (dma_caps.cmd_pause && dma_caps.cmd_resume)
+ hw->info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
+ if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
+ hw->info |= SNDRV_PCM_INFO_BATCH;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ addr_widths = dma_caps.dst_addr_widths;
+ else
+ addr_widths = dma_caps.src_addr_widths;
+ }
+
+ /*
+ * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
+ * hw.formats set to 0, meaning no restrictions are in place.
+ * In this case it's the responsibility of the DAI driver to
+ * provide the supported format information.
+ */
+ if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
+ /*
+ * Prepare formats mask for valid/allowed sample types. If the
+ * dma does not have support for the given physical word size,
+ * it needs to be masked out so user space can not use the
+ * format which produces corrupted audio.
+ * In case the dma driver does not implement the slave_caps the
+ * default assumption is that it supports 1, 2 and 4 bytes
+ * widths.
+ */
+ for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
+ int bits = snd_pcm_format_physical_width(i);
+
+ /*
+ * Enable only samples with DMA supported physical
+ * widths
+ */
+ switch (bits) {
+ case 8:
+ case 16:
+ case 24:
+ case 32:
+ case 64:
+ if (addr_widths & (1 << (bits / 8)))
+ hw->formats |= pcm_format_to_bits(i);
+ break;
+ default:
+ /* Unsupported types */
+ break;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_refine_runtime_hwparams);
+
MODULE_LICENSE("GPL");
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index 5552c66ca642..f2c98a9cbf75 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -118,12 +118,7 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
struct device *dma_dev = dmaengine_dma_dev(pcm, substream);
struct dma_chan *chan = pcm->chan[substream->stream];
struct snd_dmaengine_dai_dma_data *dma_data;
- struct dma_slave_caps dma_caps;
struct snd_pcm_hardware hw;
- u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
- BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
- BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
- snd_pcm_format_t i;
int ret;
if (pcm->config && pcm->config->pcm_hardware)
@@ -145,56 +140,12 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
hw.info |= SNDRV_PCM_INFO_BATCH;
- ret = dma_get_slave_caps(chan, &dma_caps);
- if (ret == 0) {
- if (dma_caps.cmd_pause && dma_caps.cmd_resume)
- hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
- if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
- hw.info |= SNDRV_PCM_INFO_BATCH;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- addr_widths = dma_caps.dst_addr_widths;
- else
- addr_widths = dma_caps.src_addr_widths;
- }
-
- /*
- * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
- * hw.formats set to 0, meaning no restrictions are in place.
- * In this case it's the responsibility of the DAI driver to
- * provide the supported format information.
- */
- if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
- /*
- * Prepare formats mask for valid/allowed sample types. If the
- * dma does not have support for the given physical word size,
- * it needs to be masked out so user space can not use the
- * format which produces corrupted audio.
- * In case the dma driver does not implement the slave_caps the
- * default assumption is that it supports 1, 2 and 4 bytes
- * widths.
- */
- for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
- int bits = snd_pcm_format_physical_width(i);
-
- /*
- * Enable only samples with DMA supported physical
- * widths
- */
- switch (bits) {
- case 8:
- case 16:
- case 24:
- case 32:
- case 64:
- if (addr_widths & (1 << (bits / 8)))
- hw.formats |= pcm_format_to_bits(i);
- break;
- default:
- /* Unsupported types */
- break;
- }
- }
+ ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
+ dma_data,
+ &hw,
+ chan);
+ if (ret)
+ return ret;
return snd_soc_set_runtime_hwparams(substream, &hw);
}
--
2.20.1
The patch
ASoC: fsl_asrc: update supported sample format
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 109539c986cee525e5ff9ae98793f23c2b29e54d Mon Sep 17 00:00:00 2001
From: Shengjiu Wang <[email protected]>
Date: Fri, 27 Sep 2019 09:46:10 +0800
Subject: [PATCH] ASoC: fsl_asrc: update supported sample format
The ASRC support 24bit/16bit/8bit input width, which is
data width, not slot width.
For the S20_3LE format, the data with is 20bit, slot width
is 24bit, if we set ASRMCR1n.IWD to be 24bits, the result
is the volume is lower than expected, it likes 24bit data
right shift 4 bits
So replace S20_3LE with S24_3LE in supported list and add S8
format in TX supported list
Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/45a7c383f43cc1dd9d0934846447aee653278c03.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 4d3804a1ea55..584badf956d2 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -624,7 +624,7 @@ static int fsl_asrc_dai_probe(struct snd_soc_dai *dai)
#define FSL_ASRC_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S16_LE | \
- SNDRV_PCM_FMTBIT_S20_3LE)
+ SNDRV_PCM_FMTBIT_S24_3LE)
static struct snd_soc_dai_driver fsl_asrc_dai = {
.probe = fsl_asrc_dai_probe,
@@ -635,7 +635,8 @@ static struct snd_soc_dai_driver fsl_asrc_dai = {
.rate_min = 5512,
.rate_max = 192000,
.rates = SNDRV_PCM_RATE_KNOT,
- .formats = FSL_ASRC_FORMATS,
+ .formats = FSL_ASRC_FORMATS |
+ SNDRV_PCM_FMTBIT_S8,
},
.capture = {
.stream_name = "ASRC-Capture",
--
2.20.1
The patch
ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in i.MX8
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 703df4413ff6cf1812922522daa7c0610f087910 Mon Sep 17 00:00:00 2001
From: Shengjiu Wang <[email protected]>
Date: Fri, 27 Sep 2019 09:46:12 +0800
Subject: [PATCH] ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in
i.MX8
There is error "aplay: pcm_write:2023: write error: Input/output error"
on i.MX8QM/i.MX8QXP platform for S24_3LE format.
In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit
sample, but we didn't add any constraint, that cause issues.
So we need to query the caps of dma, then update the hw parameters
according to the caps.
Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/b6a4de2bbf960ef291ee902afe4388bd0fc1d347.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 4 +--
sound/soc/fsl/fsl_asrc.h | 3 ++
sound/soc/fsl/fsl_asrc_dma.c | 64 ++++++++++++++++++++++++++++++++----
3 files changed, 62 insertions(+), 9 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 584badf956d2..0bf91a6f54b9 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -115,7 +115,7 @@ static void fsl_asrc_sel_proc(int inrate, int outrate,
* within range [ANCA, ANCA+ANCB-1], depends on the channels of pair A
* while pair A and pair C are comparatively independent.
*/
-static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
+int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
{
enum asrc_pair_index index = ASRC_INVALID_PAIR;
struct fsl_asrc *asrc_priv = pair->asrc_priv;
@@ -158,7 +158,7 @@ static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
*
* It clears the resource from asrc_priv and releases the occupied channels.
*/
-static void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
+void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
{
struct fsl_asrc *asrc_priv = pair->asrc_priv;
enum asrc_pair_index index = pair->index;
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 38af485bdd22..2b57e8c53728 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -462,4 +462,7 @@ struct fsl_asrc {
#define DRV_NAME "fsl-asrc-dai"
extern struct snd_soc_component_driver fsl_asrc_component;
struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir);
+int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair);
+void fsl_asrc_release_pair(struct fsl_asrc_pair *pair);
+
#endif /* _FSL_ASRC_H */
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index 01052a0808b0..2a60fc6142b1 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -16,13 +16,11 @@
#define FSL_ASRC_DMABUF_SIZE (256 * 1024)
-static const struct snd_pcm_hardware snd_imx_hardware = {
+static struct snd_pcm_hardware snd_imx_hardware = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_RESUME,
+ SNDRV_PCM_INFO_MMAP_VALID,
.buffer_bytes_max = FSL_ASRC_DMABUF_SIZE,
.period_bytes_min = 128,
.period_bytes_max = 65535, /* Limited by SDMA engine */
@@ -270,12 +268,25 @@ static int fsl_asrc_dma_hw_free(struct snd_pcm_substream *substream)
static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
{
+ bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
+ struct snd_dmaengine_dai_dma_data *dma_data;
struct device *dev = component->dev;
struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
struct fsl_asrc_pair *pair;
+ struct dma_chan *tmp_chan = NULL;
+ u8 dir = tx ? OUT : IN;
+ bool release_pair = true;
+ int ret = 0;
+
+ ret = snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0) {
+ dev_err(dev, "failed to set pcm hw params periods\n");
+ return ret;
+ }
pair = kzalloc(sizeof(struct fsl_asrc_pair), GFP_KERNEL);
if (!pair)
@@ -285,11 +296,50 @@ static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
runtime->private_data = pair;
- snd_pcm_hw_constraint_integer(substream->runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
+ /* Request a dummy pair, which will be released later.
+ * Request pair function needs channel num as input, for this
+ * dummy pair, we just request "1" channel temporarily.
+ */
+ ret = fsl_asrc_request_pair(1, pair);
+ if (ret < 0) {
+ dev_err(dev, "failed to request asrc pair\n");
+ goto req_pair_err;
+ }
+
+ /* Request a dummy dma channel, which will be released later. */
+ tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
+ if (!tmp_chan) {
+ dev_err(dev, "failed to get dma channel\n");
+ ret = -EINVAL;
+ goto dma_chan_err;
+ }
+
+ dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+ /* Refine the snd_imx_hardware according to caps of DMA. */
+ ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
+ dma_data,
+ &snd_imx_hardware,
+ tmp_chan);
+ if (ret < 0) {
+ dev_err(dev, "failed to refine runtime hwparams\n");
+ goto out;
+ }
+
+ release_pair = false;
snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
- return 0;
+out:
+ dma_release_channel(tmp_chan);
+
+dma_chan_err:
+ fsl_asrc_release_pair(pair);
+
+req_pair_err:
+ if (release_pair)
+ kfree(pair);
+
+ return ret;
}
static int fsl_asrc_dma_shutdown(struct snd_pcm_substream *substream)
--
2.20.1
The patch
ASoC: fsl_asrc: Use in(out)put_format instead of in(out)put_word_width
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 4bf62571070dd1021556e275d9221f736b2ffcf3 Mon Sep 17 00:00:00 2001
From: Shengjiu Wang <[email protected]>
Date: Fri, 27 Sep 2019 09:46:09 +0800
Subject: [PATCH] ASoC: fsl_asrc: Use in(out)put_format instead of
in(out)put_word_width
snd_pcm_format_t is more formal than enum asrc_word_width, which has
two property, width and physical width, which is more accurate than
enum asrc_word_width. So it is better to use in(out)put_format
instead of in(out)put_word_width.
Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/7937c1404ee327ce141cb03b3575b02ea01a740c.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 56 +++++++++++++++++++++++++++-------------
sound/soc/fsl/fsl_asrc.h | 4 +--
2 files changed, 40 insertions(+), 20 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index cfa40ef6b1ca..4d3804a1ea55 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -265,6 +265,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
struct asrc_config *config = pair->config;
struct fsl_asrc *asrc_priv = pair->asrc_priv;
enum asrc_pair_index index = pair->index;
+ enum asrc_word_width input_word_width;
+ enum asrc_word_width output_word_width;
u32 inrate, outrate, indiv, outdiv;
u32 clk_index[2], div[2];
int in, out, channels;
@@ -283,9 +285,32 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
return -EINVAL;
}
- /* Validate output width */
- if (config->output_word_width == ASRC_WIDTH_8_BIT) {
- pair_err("does not support 8bit width output\n");
+ switch (snd_pcm_format_width(config->input_format)) {
+ case 8:
+ input_word_width = ASRC_WIDTH_8_BIT;
+ break;
+ case 16:
+ input_word_width = ASRC_WIDTH_16_BIT;
+ break;
+ case 24:
+ input_word_width = ASRC_WIDTH_24_BIT;
+ break;
+ default:
+ pair_err("does not support this input format, %d\n",
+ config->input_format);
+ return -EINVAL;
+ }
+
+ switch (snd_pcm_format_width(config->output_format)) {
+ case 16:
+ output_word_width = ASRC_WIDTH_16_BIT;
+ break;
+ case 24:
+ output_word_width = ASRC_WIDTH_24_BIT;
+ break;
+ default:
+ pair_err("does not support this output format, %d\n",
+ config->output_format);
return -EINVAL;
}
@@ -383,8 +408,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
/* Implement word_width configurations */
regmap_update_bits(asrc_priv->regmap, REG_ASRMCR1(index),
ASRMCR1i_OW16_MASK | ASRMCR1i_IWD_MASK,
- ASRMCR1i_OW16(config->output_word_width) |
- ASRMCR1i_IWD(config->input_word_width));
+ ASRMCR1i_OW16(output_word_width) |
+ ASRMCR1i_IWD(input_word_width));
/* Enable BUFFER STALL */
regmap_update_bits(asrc_priv->regmap, REG_ASRMCR(index),
@@ -497,13 +522,13 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct fsl_asrc *asrc_priv = snd_soc_dai_get_drvdata(dai);
- int width = params_width(params);
struct snd_pcm_runtime *runtime = substream->runtime;
struct fsl_asrc_pair *pair = runtime->private_data;
unsigned int channels = params_channels(params);
unsigned int rate = params_rate(params);
struct asrc_config config;
- int word_width, ret;
+ snd_pcm_format_t format;
+ int ret;
ret = fsl_asrc_request_pair(channels, pair);
if (ret) {
@@ -513,15 +538,10 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
pair->config = &config;
- if (width == 16)
- width = ASRC_WIDTH_16_BIT;
- else
- width = ASRC_WIDTH_24_BIT;
-
if (asrc_priv->asrc_width == 16)
- word_width = ASRC_WIDTH_16_BIT;
+ format = SNDRV_PCM_FORMAT_S16_LE;
else
- word_width = ASRC_WIDTH_24_BIT;
+ format = SNDRV_PCM_FORMAT_S24_LE;
config.pair = pair->index;
config.channel_num = channels;
@@ -529,13 +549,13 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
config.outclk = OUTCLK_ASRCK1_CLK;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- config.input_word_width = width;
- config.output_word_width = word_width;
+ config.input_format = params_format(params);
+ config.output_format = format;
config.input_sample_rate = rate;
config.output_sample_rate = asrc_priv->asrc_rate;
} else {
- config.input_word_width = word_width;
- config.output_word_width = width;
+ config.input_format = format;
+ config.output_format = params_format(params);
config.input_sample_rate = asrc_priv->asrc_rate;
config.output_sample_rate = rate;
}
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index c60075112570..38af485bdd22 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -342,8 +342,8 @@ struct asrc_config {
unsigned int dma_buffer_size;
unsigned int input_sample_rate;
unsigned int output_sample_rate;
- enum asrc_word_width input_word_width;
- enum asrc_word_width output_word_width;
+ snd_pcm_format_t input_format;
+ snd_pcm_format_t output_format;
enum asrc_inclk inclk;
enum asrc_outclk outclk;
};
--
2.20.1
On Thu, Sep 26, 2019 at 6:50 PM Shengjiu Wang <[email protected]> wrote:
>
> When set the runtime hardware parameters, we may need to query
> the capability of DMA to complete the parameters.
>
> This patch is to Extract this operation from
> dmaengine_pcm_set_runtime_hwparams function to a separate function
> snd_dmaengine_pcm_refine_runtime_hwparams, that other components
> which need this feature can call this function.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
> Reviewed-by: Nicolin Chen <[email protected]>
As a heads up, this patch seems to be causing a regression on the HiKey board.
On boot up I'm seeing:
[ 17.721424] hi6210_i2s f7118000.i2s: ASoC: can't open component
f7118000.i2s: -6
And HDMI audio isn't working. With this patch reverted, audio works again.
> diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
> index 89a05926ac73..5749a8a49784 100644
> --- a/sound/core/pcm_dmaengine.c
> +++ b/sound/core/pcm_dmaengine.c
> @@ -369,4 +369,87 @@ int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
...
> + ret = dma_get_slave_caps(chan, &dma_caps);
> + if (ret == 0) {
> + if (dma_caps.cmd_pause && dma_caps.cmd_resume)
> + hw->info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
> + if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
> + hw->info |= SNDRV_PCM_INFO_BATCH;
> +
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> + addr_widths = dma_caps.dst_addr_widths;
> + else
> + addr_widths = dma_caps.src_addr_widths;
> + }
It seems a failing ret from dma_get_slave_caps() here is being returned...
> +
> + /*
> + * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
> + * hw.formats set to 0, meaning no restrictions are in place.
> + * In this case it's the responsibility of the DAI driver to
> + * provide the supported format information.
> + */
> + if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
> + /*
> + * Prepare formats mask for valid/allowed sample types. If the
> + * dma does not have support for the given physical word size,
> + * it needs to be masked out so user space can not use the
> + * format which produces corrupted audio.
> + * In case the dma driver does not implement the slave_caps the
> + * default assumption is that it supports 1, 2 and 4 bytes
> + * widths.
> + */
> + for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
> + int bits = snd_pcm_format_physical_width(i);
> +
> + /*
> + * Enable only samples with DMA supported physical
> + * widths
> + */
> + switch (bits) {
> + case 8:
> + case 16:
> + case 24:
> + case 32:
> + case 64:
> + if (addr_widths & (1 << (bits / 8)))
> + hw->formats |= pcm_format_to_bits(i);
> + break;
> + default:
> + /* Unsupported types */
> + break;
> + }
> + }
> +
> + return ret;
... down here.
Where as in the old code...
> diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
> index 748f5f641002..b9f147eaf7c4 100644
> --- a/sound/soc/soc-generic-dmaengine-pcm.c
> +++ b/sound/soc/soc-generic-dmaengine-pcm.c
> @@ -145,56 +140,12 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
> if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
> hw.info |= SNDRV_PCM_INFO_BATCH;
>
> - ret = dma_get_slave_caps(chan, &dma_caps);
> - if (ret == 0) {
> - if (dma_caps.cmd_pause && dma_caps.cmd_resume)
> - hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
> - if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
> - hw.info |= SNDRV_PCM_INFO_BATCH;
> -
> - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> - addr_widths = dma_caps.dst_addr_widths;
> - else
> - addr_widths = dma_caps.src_addr_widths;
> - }
...the ret from dma_get_slave_caps() checked above, but is not
actually returned.
Suggestions on how to sort this out?
thanks
-john
On Wed, Jan 8, 2020 at 8:58 PM John Stultz <[email protected]> wrote:
> On Thu, Sep 26, 2019 at 6:50 PM Shengjiu Wang <[email protected]> wrote:
> >
> > When set the runtime hardware parameters, we may need to query
> > the capability of DMA to complete the parameters.
> >
> > This patch is to Extract this operation from
> > dmaengine_pcm_set_runtime_hwparams function to a separate function
> > snd_dmaengine_pcm_refine_runtime_hwparams, that other components
> > which need this feature can call this function.
> >
> > Signed-off-by: Shengjiu Wang <[email protected]>
> > Reviewed-by: Nicolin Chen <[email protected]>
>
> As a heads up, this patch seems to be causing a regression on the HiKey board.
>
> On boot up I'm seeing:
> [ 17.721424] hi6210_i2s f7118000.i2s: ASoC: can't open component
> f7118000.i2s: -6
>
> And HDMI audio isn't working. With this patch reverted, audio works again.
>
>
> > diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
> > index 89a05926ac73..5749a8a49784 100644
> > --- a/sound/core/pcm_dmaengine.c
> > +++ b/sound/core/pcm_dmaengine.c
> > @@ -369,4 +369,87 @@ int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
> ...
> > + ret = dma_get_slave_caps(chan, &dma_caps);
> > + if (ret == 0) {
> > + if (dma_caps.cmd_pause && dma_caps.cmd_resume)
> > + hw->info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
> > + if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
> > + hw->info |= SNDRV_PCM_INFO_BATCH;
> > +
> > + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> > + addr_widths = dma_caps.dst_addr_widths;
> > + else
> > + addr_widths = dma_caps.src_addr_widths;
> > + }
>
> It seems a failing ret from dma_get_slave_caps() here is being returned...
>
> > +
> > + /*
> > + * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
> > + * hw.formats set to 0, meaning no restrictions are in place.
> > + * In this case it's the responsibility of the DAI driver to
> > + * provide the supported format information.
> > + */
> > + if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
> > + /*
> > + * Prepare formats mask for valid/allowed sample types. If the
> > + * dma does not have support for the given physical word size,
> > + * it needs to be masked out so user space can not use the
> > + * format which produces corrupted audio.
> > + * In case the dma driver does not implement the slave_caps the
> > + * default assumption is that it supports 1, 2 and 4 bytes
> > + * widths.
> > + */
> > + for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
> > + int bits = snd_pcm_format_physical_width(i);
> > +
> > + /*
> > + * Enable only samples with DMA supported physical
> > + * widths
> > + */
> > + switch (bits) {
> > + case 8:
> > + case 16:
> > + case 24:
> > + case 32:
> > + case 64:
> > + if (addr_widths & (1 << (bits / 8)))
> > + hw->formats |= pcm_format_to_bits(i);
> > + break;
> > + default:
> > + /* Unsupported types */
> > + break;
> > + }
> > + }
> > +
> > + return ret;
>
> ... down here.
>
> Where as in the old code...
>
> > diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
> > index 748f5f641002..b9f147eaf7c4 100644
> > --- a/sound/soc/soc-generic-dmaengine-pcm.c
> > +++ b/sound/soc/soc-generic-dmaengine-pcm.c
>
> > @@ -145,56 +140,12 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
> > if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
> > hw.info |= SNDRV_PCM_INFO_BATCH;
> >
> > - ret = dma_get_slave_caps(chan, &dma_caps);
> > - if (ret == 0) {
> > - if (dma_caps.cmd_pause && dma_caps.cmd_resume)
> > - hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
> > - if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
> > - hw.info |= SNDRV_PCM_INFO_BATCH;
> > -
> > - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> > - addr_widths = dma_caps.dst_addr_widths;
> > - else
> > - addr_widths = dma_caps.src_addr_widths;
> > - }
>
> ...the ret from dma_get_slave_caps() checked above, but is not
> actually returned.
>
> Suggestions on how to sort this out?
Just wanted to check in on this, as I'm still seeing this regression with -rc6.
thanks
-john
Hi
On Thu, Jan 16, 2020 at 1:56 PM John Stultz <[email protected]> wrote:
>
> On Wed, Jan 8, 2020 at 8:58 PM John Stultz <[email protected]> wrote:
> > On Thu, Sep 26, 2019 at 6:50 PM Shengjiu Wang <[email protected]> wrote:
> > >
> > > When set the runtime hardware parameters, we may need to query
> > > the capability of DMA to complete the parameters.
> > >
> > > This patch is to Extract this operation from
> > > dmaengine_pcm_set_runtime_hwparams function to a separate function
> > > snd_dmaengine_pcm_refine_runtime_hwparams, that other components
> > > which need this feature can call this function.
> > >
> > > Signed-off-by: Shengjiu Wang <[email protected]>
> > > Reviewed-by: Nicolin Chen <[email protected]>
> >
> > As a heads up, this patch seems to be causing a regression on the HiKey board.
> >
> > On boot up I'm seeing:
> > [ 17.721424] hi6210_i2s f7118000.i2s: ASoC: can't open component
> > f7118000.i2s: -6
> >
> > And HDMI audio isn't working. With this patch reverted, audio works again.
> >
> >
> > > diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
> > > index 89a05926ac73..5749a8a49784 100644
> > > --- a/sound/core/pcm_dmaengine.c
> > > +++ b/sound/core/pcm_dmaengine.c
> > > @@ -369,4 +369,87 @@ int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
> > ...
> > > + ret = dma_get_slave_caps(chan, &dma_caps);
> > > + if (ret == 0) {
> > > + if (dma_caps.cmd_pause && dma_caps.cmd_resume)
> > > + hw->info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
> > > + if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
> > > + hw->info |= SNDRV_PCM_INFO_BATCH;
> > > +
> > > + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> > > + addr_widths = dma_caps.dst_addr_widths;
> > > + else
> > > + addr_widths = dma_caps.src_addr_widths;
> > > + }
> >
> > It seems a failing ret from dma_get_slave_caps() here is being returned...
> >
> > > +
> > > + /*
> > > + * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
> > > + * hw.formats set to 0, meaning no restrictions are in place.
> > > + * In this case it's the responsibility of the DAI driver to
> > > + * provide the supported format information.
> > > + */
> > > + if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
> > > + /*
> > > + * Prepare formats mask for valid/allowed sample types. If the
> > > + * dma does not have support for the given physical word size,
> > > + * it needs to be masked out so user space can not use the
> > > + * format which produces corrupted audio.
> > > + * In case the dma driver does not implement the slave_caps the
> > > + * default assumption is that it supports 1, 2 and 4 bytes
> > > + * widths.
> > > + */
> > > + for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
> > > + int bits = snd_pcm_format_physical_width(i);
> > > +
> > > + /*
> > > + * Enable only samples with DMA supported physical
> > > + * widths
> > > + */
> > > + switch (bits) {
> > > + case 8:
> > > + case 16:
> > > + case 24:
> > > + case 32:
> > > + case 64:
> > > + if (addr_widths & (1 << (bits / 8)))
> > > + hw->formats |= pcm_format_to_bits(i);
> > > + break;
> > > + default:
> > > + /* Unsupported types */
> > > + break;
> > > + }
> > > + }
> > > +
> > > + return ret;
> >
> > ... down here.
> >
> > Where as in the old code...
> >
> > > diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
> > > index 748f5f641002..b9f147eaf7c4 100644
> > > --- a/sound/soc/soc-generic-dmaengine-pcm.c
> > > +++ b/sound/soc/soc-generic-dmaengine-pcm.c
> >
> > > @@ -145,56 +140,12 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
> > > if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
> > > hw.info |= SNDRV_PCM_INFO_BATCH;
> > >
> > > - ret = dma_get_slave_caps(chan, &dma_caps);
> > > - if (ret == 0) {
> > > - if (dma_caps.cmd_pause && dma_caps.cmd_resume)
> > > - hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
> > > - if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
> > > - hw.info |= SNDRV_PCM_INFO_BATCH;
> > > -
> > > - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> > > - addr_widths = dma_caps.dst_addr_widths;
> > > - else
> > > - addr_widths = dma_caps.src_addr_widths;
> > > - }
> >
> > ...the ret from dma_get_slave_caps() checked above, but is not
> > actually returned.
> >
> > Suggestions on how to sort this out?
>
> Just wanted to check in on this, as I'm still seeing this regression with -rc6.
>
Compare with the old code. it seems that we shouldn't check the return value.
Could you help to test below changes?
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -138,12 +138,10 @@ dmaengine_pcm_set_runtime_hwparams(struct
snd_soc_component *component,
if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
hw.info |= SNDRV_PCM_INFO_BATCH;
- ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
+ snd_dmaengine_pcm_refine_runtime_hwparams(substream,
dma_data,
&hw,
chan);
- if (ret)
- return ret;
return snd_soc_set_runtime_hwparams(substream, &hw);
}
Best regards
Shengjiu Wang
On Thu, Jan 16, 2020 at 11:11 PM Shengjiu Wang <[email protected]> wrote:
>
> Hi
>
> On Thu, Jan 16, 2020 at 1:56 PM John Stultz <[email protected]> wrote:
> >
> > On Wed, Jan 8, 2020 at 8:58 PM John Stultz <[email protected]> wrote:
> > > On Thu, Sep 26, 2019 at 6:50 PM Shengjiu Wang <[email protected]> wrote:
> > > >
> > > > When set the runtime hardware parameters, we may need to query
> > > > the capability of DMA to complete the parameters.
> > > >
> > > > This patch is to Extract this operation from
> > > > dmaengine_pcm_set_runtime_hwparams function to a separate function
> > > > snd_dmaengine_pcm_refine_runtime_hwparams, that other components
> > > > which need this feature can call this function.
> > > >
> > > > Signed-off-by: Shengjiu Wang <[email protected]>
> > > > Reviewed-by: Nicolin Chen <[email protected]>
> > >
> > > As a heads up, this patch seems to be causing a regression on the HiKey board.
> > >
> > > On boot up I'm seeing:
> > > [ 17.721424] hi6210_i2s f7118000.i2s: ASoC: can't open component
> > > f7118000.i2s: -6
> > >
> > > And HDMI audio isn't working. With this patch reverted, audio works again.
> > >
> > >
> > > > diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
> > > > index 89a05926ac73..5749a8a49784 100644
> > > > --- a/sound/core/pcm_dmaengine.c
> > > > +++ b/sound/core/pcm_dmaengine.c
> > > > @@ -369,4 +369,87 @@ int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
> > > ...
> > > > + ret = dma_get_slave_caps(chan, &dma_caps);
> > > > + if (ret == 0) {
> > > > + if (dma_caps.cmd_pause && dma_caps.cmd_resume)
> > > > + hw->info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
> > > > + if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
> > > > + hw->info |= SNDRV_PCM_INFO_BATCH;
> > > > +
> > > > + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> > > > + addr_widths = dma_caps.dst_addr_widths;
> > > > + else
> > > > + addr_widths = dma_caps.src_addr_widths;
> > > > + }
> > >
> > > It seems a failing ret from dma_get_slave_caps() here is being returned...
> > >
> > > > +
> > > > + /*
> > > > + * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
> > > > + * hw.formats set to 0, meaning no restrictions are in place.
> > > > + * In this case it's the responsibility of the DAI driver to
> > > > + * provide the supported format information.
> > > > + */
> > > > + if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
> > > > + /*
> > > > + * Prepare formats mask for valid/allowed sample types. If the
> > > > + * dma does not have support for the given physical word size,
> > > > + * it needs to be masked out so user space can not use the
> > > > + * format which produces corrupted audio.
> > > > + * In case the dma driver does not implement the slave_caps the
> > > > + * default assumption is that it supports 1, 2 and 4 bytes
> > > > + * widths.
> > > > + */
> > > > + for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
> > > > + int bits = snd_pcm_format_physical_width(i);
> > > > +
> > > > + /*
> > > > + * Enable only samples with DMA supported physical
> > > > + * widths
> > > > + */
> > > > + switch (bits) {
> > > > + case 8:
> > > > + case 16:
> > > > + case 24:
> > > > + case 32:
> > > > + case 64:
> > > > + if (addr_widths & (1 << (bits / 8)))
> > > > + hw->formats |= pcm_format_to_bits(i);
> > > > + break;
> > > > + default:
> > > > + /* Unsupported types */
> > > > + break;
> > > > + }
> > > > + }
> > > > +
> > > > + return ret;
> > >
> > > ... down here.
> > >
> > > Where as in the old code...
> > >
> > > > diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
> > > > index 748f5f641002..b9f147eaf7c4 100644
> > > > --- a/sound/soc/soc-generic-dmaengine-pcm.c
> > > > +++ b/sound/soc/soc-generic-dmaengine-pcm.c
> > >
> > > > @@ -145,56 +140,12 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
> > > > if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
> > > > hw.info |= SNDRV_PCM_INFO_BATCH;
> > > >
> > > > - ret = dma_get_slave_caps(chan, &dma_caps);
> > > > - if (ret == 0) {
> > > > - if (dma_caps.cmd_pause && dma_caps.cmd_resume)
> > > > - hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
> > > > - if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
> > > > - hw.info |= SNDRV_PCM_INFO_BATCH;
> > > > -
> > > > - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> > > > - addr_widths = dma_caps.dst_addr_widths;
> > > > - else
> > > > - addr_widths = dma_caps.src_addr_widths;
> > > > - }
> > >
> > > ...the ret from dma_get_slave_caps() checked above, but is not
> > > actually returned.
> > >
> > > Suggestions on how to sort this out?
> >
> > Just wanted to check in on this, as I'm still seeing this regression with -rc6.
> >
> Compare with the old code. it seems that we shouldn't check the return value.
>
> Could you help to test below changes?
>
> --- a/sound/soc/soc-generic-dmaengine-pcm.c
> +++ b/sound/soc/soc-generic-dmaengine-pcm.c
> @@ -138,12 +138,10 @@ dmaengine_pcm_set_runtime_hwparams(struct
> snd_soc_component *component,
> if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
> hw.info |= SNDRV_PCM_INFO_BATCH;
>
> - ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
> + snd_dmaengine_pcm_refine_runtime_hwparams(substream,
> dma_data,
> &hw,
> chan);
> - if (ret)
> - return ret;
>
> return snd_soc_set_runtime_hwparams(substream, &hw);
> }
Yes, thanks for taking a look at this! Your patch does appear to avoid
the regression.
(Though you'll want to drop the ret declaration to avoid "warning:
unused variable 'ret'" compiler warnings.)
thanks
-john