Hello Paul,
as previously discussed after Alexey's report, Thomas updated his stack
smashing code to use a volatile pointer instead of dropping compiler
optimizations. It's both cleaner and safer this way.
I verified on all supported archs that it doesn't change the behavior
and passes the test without issues, so I'm fine with it:
125 test(s) passed.
It can be queued on top of the existing series either for the next merge
or the one after at your convenience, as I know that you're running long
and complete tests with your series, and I don't want to make you change
your tests at the last minute. This one is not urgent at all, it's more
of a maintenance improvement anyway.
Thank you!
Willy
Thomas Weißschuh (1):
tools/nolibc: tests: use volatile to force stack smashing
tools/testing/selftests/nolibc/nolibc-test.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--
2.17.5
From: Thomas Weißschuh <[email protected]>
Use a volatile pointer to write outside the buffer so the compiler can't
optimize it away.
Reported-by: Alexey Dobriyan <[email protected]>
Link: https://lore.kernel.org/lkml/c0584807-511c-4496-b062-1263ea38f349@p183/
Signed-off-by: Thomas Weißschuh <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
---
tools/testing/selftests/nolibc/nolibc-test.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c
index 21bacc928bf7..47013b78972e 100644
--- a/tools/testing/selftests/nolibc/nolibc-test.c
+++ b/tools/testing/selftests/nolibc/nolibc-test.c
@@ -667,17 +667,13 @@ int run_stdlib(int min, int max)
return ret;
}
-#if defined(__clang__)
-__attribute__((optnone))
-#elif defined(__GNUC__)
-__attribute__((optimize("O0")))
-#endif
static int smash_stack(void)
{
char buf[100];
+ volatile char *ptr = buf;
for (size_t i = 0; i < 200; i++)
- buf[i] = 'P';
+ ptr[i] = 'P';
return 1;
}
--
2.17.5
On Tue, Mar 28, 2023 at 06:18:44PM +0200, Willy Tarreau wrote:
> Hello Paul,
>
> as previously discussed after Alexey's report, Thomas updated his stack
> smashing code to use a volatile pointer instead of dropping compiler
> optimizations. It's both cleaner and safer this way.
>
> I verified on all supported archs that it doesn't change the behavior
> and passes the test without issues, so I'm fine with it:
>
> 125 test(s) passed.
>
> It can be queued on top of the existing series either for the next merge
> or the one after at your convenience, as I know that you're running long
> and complete tests with your series, and I don't want to make you change
> your tests at the last minute. This one is not urgent at all, it's more
> of a maintenance improvement anyway.
I have queued this for the v6.5 merge window, thank you! If urgency
does develop in the next couple of days, please let me know, and I will
see what I can do about moving it to the v6.4 pile.
I got this from "make run" (after merging with v6.3-rc3 as discussed
earlier):
make[1]: Leaving directory '/home/git/linux-build'
126 test(s) passed.
This differs from your results, so please see below for the run.out file.
(I see 126 instances of "[OK]".)
But this from "make run-user":
CC nolibc-test
124 test(s) passed
The output of "grep -v "\[OK]" run.out" is as follows:
Running test 'syscall'
18 chroot_root [SKIPPED]
43 link_dir [SKIPPED]
Errors during this test: 0
Running test 'stdlib'
Errors during this test: 0
Running test 'protection'
Errors during this test: 0
Total number of errors: 0
Exiting with status 0
I am guessing is that this is because I am too cowardly to run this
test with root privileges, but thought I should run it by you.
Thanx, Paul
------------------------------------------------------------------------
[ 0.000000] Linux version 6.3.0-rc3-00173-g9c9d64a040a4 (paulmck@paulmck-ThinkPad-P72) (gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #6 SMP Tue Mar 28 11:00:31 PDT 2023
[ 0.000000] Command line: console=ttyS0,9600 i8042.noaux panic=-1
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] signal: max sigframe size: 1440
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000007fdffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000007fe0000-0x0000000007ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 0.000000] last_pfn = 0x7fe0 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000f5ba0-0x000f5baf]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F59E0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x0000000007FE1905 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x0000000007FE17B9 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x0000000007FE0040 001779 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x0000000007FE0000 000040
[ 0.000000] ACPI: APIC 0x0000000007FE182D 000078 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x0000000007FE18A5 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: WAET 0x0000000007FE18DD 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: Reserving FACP table memory at [mem 0x7fe17b9-0x7fe182c]
[ 0.000000] ACPI: Reserving DSDT table memory at [mem 0x7fe0040-0x7fe17b8]
[ 0.000000] ACPI: Reserving FACS table memory at [mem 0x7fe0000-0x7fe003f]
[ 0.000000] ACPI: Reserving APIC table memory at [mem 0x7fe182d-0x7fe18a4]
[ 0.000000] ACPI: Reserving HPET table memory at [mem 0x7fe18a5-0x7fe18dc]
[ 0.000000] ACPI: Reserving WAET table memory at [mem 0x7fe18dd-0x7fe1904]
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000007fdffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x07fdc000-0x07fdffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000007fdffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000007fdffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000007fdffff]
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] [mem 0x08000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 57 pages/cpu s195936 r8192 d29344 u2097152
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 31968
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: console=ttyS0,9600 i8042.noaux panic=-1
[ 0.000000] Dentry cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 75860K/130552K available (18432K kernel code, 2989K rwdata, 6428K rodata, 2776K init, 13252K bss, 54432K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Running RCU self tests
[ 0.000000] Running RCU synchronous self tests
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 2.
[ 0.000000] rcu: RCU lockdep checking is enabled.
[ 0.000000] rcu: Build-time adjustment of leaf fanout to 2.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=2, nr_cpu_ids=1
[ 0.000000] Running RCU synchronous self tests
[ 0.000000] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8192
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 6365 kB
[ 0.000000] memory used for stack traces: 4224 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] ACPI: Core revision 20221020
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.001000] APIC: Switch to symmetric I/O mode setup
[ 0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.001000] tsc: Unable to calibrate against PIT
[ 0.001000] tsc: using HPET reference calibration
[ 0.001000] tsc: Detected 2205.917 MHz processor
[ 0.001000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fcc086e883, max_idle_ns: 440795286606 ns
[ 0.001924] Calibrating delay loop (skipped), value calculated using timer frequency.. 4411.83 BogoMIPS (lpj=2205917)
[ 0.002340] pid_max: default: 32768 minimum: 301
[ 0.004553] LSM: initializing lsm=capability,integrity,selinux
[ 0.005132] SELinux: Initializing.
[ 0.007208] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.007443] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.028805] process: using AMD E400 aware idle routine
[ 0.029317] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
[ 0.029506] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
[ 0.029928] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.030246] Spectre V2 : Mitigation: Retpolines
[ 0.030397] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.030698] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.541734] Freeing SMP alternatives memory: 44K
[ 0.543259] Running RCU synchronous self tests
[ 0.543538] Running RCU synchronous self tests
[ 0.660657] smpboot: CPU0: AMD QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.672171] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[ 0.673162] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[ 0.674124] Running RCU-tasks wait API self tests
[ 0.678113] Performance Events: PMU not available due to virtualization, using software events only.
[ 0.680370] Callback from call_rcu_tasks_trace() invoked.
[ 0.681343] rcu: Hierarchical SRCU implementation.
[ 0.681521] rcu: Max phase no-delay instances is 400.
[ 0.689257] smp: Bringing up secondary CPUs ...
[ 0.689490] smp: Brought up 1 node, 1 CPU
[ 0.689647] smpboot: Max logical packages: 1
[ 0.689884] smpboot: Total of 1 processors activated (4411.83 BogoMIPS)
[ 0.704978] devtmpfs: initialized
[ 0.715884] Running RCU synchronous self tests
[ 0.716176] Running RCU synchronous self tests
[ 0.717110] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.717602] futex hash table entries: 256 (order: 3, 32768 bytes, linear)
[ 0.721872] PM: RTC time: 18:00:43, date: 2023-03-28
[ 0.727880] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.733759] audit: initializing netlink subsys (disabled)
[ 0.740683] thermal_sys: Registered thermal governor 'step_wise'
[ 0.740740] thermal_sys: Registered thermal governor 'user_space'
[ 0.741966] audit: type=2000 audit(1680026442.751:1): state=initialized audit_enabled=0 res=1
[ 0.742742] cpuidle: using governor menu
[ 0.746952] PCI: Using configuration type 1 for base access
[ 0.750967] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 1.080964] Callback from call_rcu_tasks_rude() invoked.
[ 1.083789] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 1.084018] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 1.092840] ACPI: Added _OSI(Module Device)
[ 1.093017] ACPI: Added _OSI(Processor Device)
[ 1.093156] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.093294] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.113347] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 1.131883] ACPI: Interpreter enabled
[ 1.133317] ACPI: PM: (supports S0 S3 S4 S5)
[ 1.133536] ACPI: Using IOAPIC for interrupt routing
[ 1.134131] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.134406] PCI: Using E820 reservations for host bridge windows
[ 1.136657] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 1.198054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.199016] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 1.199429] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 1.200736] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 1.206413] PCI host bridge to bus 0000:00
[ 1.206772] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 1.207071] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 1.207265] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 1.207529] pci_bus 0000:00: root bus resource [mem 0x08000000-0xfebfffff window]
[ 1.207687] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 1.208081] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.210024] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 1.221367] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 1.223148] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 1.224196] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f]
[ 1.225424] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 1.225716] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 1.225931] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 1.226143] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 1.227277] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 1.227888] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 1.228127] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 1.229102] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 1.229657] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 1.230657] pci 0000:00:02.0: reg 0x18: [mem 0xfebb0000-0xfebb0fff]
[ 1.232657] pci 0000:00:02.0: reg 0x30: [mem 0xfeba0000-0xfebaffff pref]
[ 1.233942] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.241409] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 1.241697] pci 0000:00:03.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[ 1.242326] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 1.244521] pci 0000:00:03.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 1.258825] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 1.260129] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 1.261237] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 1.262296] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 1.262867] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 1.267113] iommu: Default domain type: Translated
[ 1.267299] iommu: DMA domain TLB invalidation policy: lazy mode
[ 1.271767] SCSI subsystem initialized
[ 1.274262] ACPI: bus type USB registered
[ 1.274862] usbcore: registered new interface driver usbfs
[ 1.275366] usbcore: registered new interface driver hub
[ 1.275904] usbcore: registered new device driver usb
[ 1.276567] pps_core: LinuxPPS API ver. 1 registered
[ 1.276692] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.277090] PTP clock support registered
[ 1.279819] Advanced Linux Sound Architecture Driver Initialized.
[ 1.291065] NetLabel: Initializing
[ 1.291198] NetLabel: domain hash size = 128
[ 1.291335] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.292791] NetLabel: unlabeled traffic allowed by default
[ 1.297847] PCI: Using ACPI for IRQ routing
[ 1.300176] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.300437] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.300652] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.300711] vgaarb: loaded
[ 1.302173] hpet: 3 channels of 0 reserved for per-cpu timers
[ 1.302564] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.302899] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 1.308410] clocksource: Switched to clocksource tsc-early
[ 1.313612] VFS: Disk quotas dquot_6.6.0
[ 1.314010] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.316702] pnp: PnP ACPI init
[ 1.324096] pnp: PnP ACPI: found 6 devices
[ 1.773718] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.774775] NET: Registered PF_INET protocol family
[ 1.776117] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 1.783192] tcp_listen_portaddr_hash hash table entries: 64 (order: 0, 4608 bytes, linear)
[ 1.783539] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.783890] TCP established hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 1.784319] TCP bind hash table entries: 1024 (order: 5, 147456 bytes, linear)
[ 1.785095] TCP: Hash tables configured (established 1024 bind 1024)
[ 1.786344] UDP hash table entries: 256 (order: 3, 40960 bytes, linear)
[ 1.786926] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes, linear)
[ 1.788877] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.795860] RPC: Registered named UNIX socket transport module.
[ 1.796142] RPC: Registered udp transport module.
[ 1.796295] RPC: Registered tcp transport module.
[ 1.796438] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.800283] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.800493] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.800776] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.800976] pci_bus 0000:00: resource 7 [mem 0x08000000-0xfebfffff window]
[ 1.801167] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 1.802253] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.802514] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.802908] PCI: CLS 0 bytes, default 64
[ 1.824333] rcu-torture:--- Start of test: nreaders=1 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 stall_cpu_irqsoff=0 stall_cpu_block=0 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0 read_exit_delay=13 read_exit_burst=16 nocbs_nthreads=0 nocbs_toggle=1000 test_nmis=0
[ 1.825759] rcu: Start-test grace-period state: g-1168 f0x0
[ 1.826260] rcu_torture_write_types: Testing conditional GPs.
[ 1.826467] rcu_torture_write_types: Testing conditional expedited GPs.
[ 1.826685] rcu_torture_write_types: Testing conditional full-state GPs.
[ 1.826982] rcu_torture_write_types: Testing expedited GPs.
[ 1.827173] rcu_torture_write_types: Testing asynchronous GPs.
[ 1.827373] rcu_torture_write_types: Testing polling GPs.
[ 1.827563] rcu_torture_write_types: Testing polling full-state GPs.
[ 1.827837] rcu_torture_write_types: Testing polling expedited GPs.
[ 1.828042] rcu_torture_write_types: Testing polling full-state expedited GPs.
[ 1.828260] rcu_torture_write_types: Testing normal GPs.
[ 1.828455] rcu-torture: Creating rcu_torture_writer task
[ 1.831338] rcu-torture: Creating rcu_torture_fakewriter task
[ 1.832205] rcu-torture: rcu_torture_writer task started
[ 1.832388] rcu-torture: GP expediting controlled from boot/sysfs for rcu.
[ 1.833024] rcu-torture: Creating rcu_torture_fakewriter task
[ 1.834786] rcu-torture: rcu_torture_fakewriter task started
[ 1.835247] rcu-torture: Creating rcu_torture_fakewriter task
[ 1.836522] rcu-torture: rcu_torture_fakewriter task started
[ 1.836943] rcu-torture: Creating rcu_torture_fakewriter task
[ 1.837353] rcu-torture: rcu_torture_fakewriter task started
[ 1.837694] rcu-torture: Creating rcu_torture_reader task
[ 1.838175] rcu-torture: rcu_torture_fakewriter task started
[ 1.838501] rcu-torture: Creating rcu_torture_stats task
[ 1.838982] rcu-torture: rcu_torture_reader task started
[ 1.840195] rcu-torture: Creating torture_shuffle task
[ 1.840692] rcu-torture: rcu_torture_stats task started
[ 1.841399] rcu-torture: Creating torture_stutter task
[ 1.841939] rcu-torture: torture_shuffle task started
[ 1.842391] rcu-torture: rcu_torture_fwd_prog_init: Limiting fwd_progress to # CPUs.
[ 1.842391]
[ 1.843025] rcu-torture: Creating rcu_torture_fwd_prog task
[ 1.843891] rcu-torture: torture_stutter task started
[ 1.844491] rcu-torture: Creating rcu_torture_read_exit task
[ 1.845064] rcu-torture: rcu_torture_fwd_progress task started
[ 1.850937] Initialise system trusted keyrings
[ 1.853002] rcu-torture: rcu_torture_read_exit: Start of test
[ 1.853206] rcu-torture: rcu_torture_read_exit: Start of episode
[ 1.854047] workingset: timestamp_bits=56 max_order=15 bucket_order=0
[ 1.859636] NFS: Registering the id_resolver key type
[ 1.860312] Key type id_resolver registered
[ 1.860530] Key type id_legacy registered
[ 1.862220] 9p: Installing v9fs 9p2000 file system support
[ 1.893469] Key type asymmetric registered
[ 1.893787] Asymmetric key parser 'x509' registered
[ 1.894328] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.895289] io scheduler mq-deadline registered
[ 1.895480] io scheduler kyber registered
[ 1.900111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.905797] ACPI: button: Power Button [PWRF]
[ 1.910686] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.913443] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.924247] Non-volatile memory driver v1.3
[ 1.924462] Linux agpgart interface v0.103
[ 1.927111] ACPI: bus type drm_connector registered
[ 1.969221] loop: module loaded
[ 1.983412] scsi host0: ata_piix
[ 1.987231] scsi host1: ata_piix
[ 1.988341] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc040 irq 14
[ 1.988589] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc048 irq 15
[ 1.994574] e100: Intel(R) PRO/100 Network Driver
[ 1.994797] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.995119] e1000: Intel(R) PRO/1000 Network Driver
[ 1.995272] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.673908] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 2.835373] tsc: Refined TSC clocksource calibration: 2207.998 MHz
[ 2.835907] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b6211b4, max_idle_ns: 440795230313 ns
[ 2.836967] ata2: found unknown device (class 0)
[ 2.841216] clocksource: Switched to clocksource tsc
[ 2.844170] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 2.859902] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 2.886037] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 2.886533] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.917488] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 3.017386] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[ 3.018119] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.018585] e1000e: Intel(R) PRO/1000 Network Driver
[ 3.018811] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.019145] sky2: driver version 1.30
[ 3.023173] usbcore: registered new interface driver usblp
[ 3.023539] usbcore: registered new interface driver usb-storage
[ 3.024665] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.026298] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.031255] rtc_cmos 00:05: RTC can wake from S4
[ 3.037646] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.044401] rtc_cmos 00:05: registered as rtc0
[ 3.045623] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 3.046429] fail to initialize ptp_kvm
[ 3.048469] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
[ 3.049738] hid: raw HID events driver (C) Jiri Kosina
[ 3.053277] usbcore: registered new interface driver usbhid
[ 3.053460] usbhid: USB HID core driver
[ 3.065334] Initializing XFRM netlink socket
[ 3.066154] NET: Registered PF_INET6 protocol family
[ 3.075382] Segment Routing with IPv6
[ 3.075709] In-situ OAM (IOAM) with IPv6
[ 3.077214] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.081086] NET: Registered PF_PACKET protocol family
[ 3.082504] 9pnet: Installing 9P2000 support
[ 3.083063] Key type dns_resolver registered
[ 3.086230] IPI shorthand broadcast: enabled
[ 3.173584] sched_clock: Marking stable (3189076316, -16342672)->(3178740114, -6006470)
[ 3.177276] registered taskstats version 1
[ 3.177452] Loading compiled-in X.509 certificates
[ 3.222971] PM: Magic number: 15:955:39
[ 3.223253] bdi 7:4: hash matches
[ 3.224418] printk: console [netcon0] enabled
[ 3.224609] netconsole: network logging started
[ 3.228639] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.248888] kworker/u2:1 (56) used greatest stack depth: 14256 bytes left
[ 3.260968] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.262207] ALSA device list:
[ 3.262428] No soundcards found.
[ 3.266545] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.267268] cfg80211: failed to load regulatory.db
[ 3.268490] Warning: unable to open an initial console.
[ 3.310541] Freeing unused kernel image (initmem) memory: 2776K
[ 3.312221] Write protecting the kernel read-only data: 26624k
[ 3.317155] Freeing unused kernel image (rodata/data gap) memory: 1764K
[ 3.523525] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.524000] Run /init as init process
[ 3.793502] random: crng init done
Successfully reopened /dev/console.
Running test 'syscall'
0 getpid = 1 [OK]
1 getppid = 0 [OK]
3 gettid = 1 [OK]
5 getpgid_self = 0 [OK]
6 getpgid_bad = -1 ESRCH [OK]
7 kill_0 = 0 [OK]
8 kill_CONT = 0 [OK]
9 kill_BADPID = -1 ESRCH [OK]
10 sbrk = 0 [OK]
11 brk = 0 [OK]
12 chdir_root = 0 [OK]
13 chdir_dot = 0 [OK]
14 chdir_blah = -1 ENOENT [OK]
15 chmod_net = 0 [OK]
16 chmod_self = -1 EPERM [OK]
17 chown_self = -1 EPERM [OK]
18 chroot_root = 0 [OK]
19 chroot_blah = -1 ENOENT [OK]
20 chroot_exe = -1 ENOTDIR [OK]
21 close_m1 = -1 EBADF [OK]
22 close_dup = 0 [OK]
23 dup_0 = 3 [OK]
24 dup_m1 = -1 EBADF [OK]
25 dup2_0 = 100 [OK]
26 dup2_m1 = -1 EBADF [OK]
27 dup3_0 = 100 [OK]
28 dup3_m1 = -1 EBADF [OK]
29 execve_root = -1 EACCES [OK]
30 getdents64_root = 120 [OK]
31 getdents64_null = -1 ENOTDIR [OK]
32 gettimeofday_null = 0 [OK]
34 gettimeofday_bad1 = -1 EFAULT [OK]
35 gettimeofday_bad2 = -1 EFAULT [OK]
36 gettimeofday_bad2 = -1 EFAULT [OK]
38 getpagesize = 0 [OK]
39 ioctl_tiocinq = 0 [OK]
40 ioctl_tiocinq = 0 [OK]
41 link_root1 = -1 EEXIST [OK]
42 link_blah = -1 ENOENT [OK]
43 link_dir = -1 EPERM [OK]
44 link_cross = -1 EXDEV [OK]
45 lseek_m1 = -1 EBADF [OK]
46 lseek_0 = -1 ESPIPE [OK]
47 mkdir_root = -1 EEXIST [OK]
48 open_tty = 3 [OK]
49 open_blah = -1 ENOENT [OK]
50 poll_null = 0 [OK]
51 poll_stdout = 1 [OK]
52 poll_fault = -1 EFAULT [OK]
53 read_badf = -1 EBADF [OK]
54 sched_yield = 0 [OK]
55 select_null = 0 [OK]
56 select_stdout = 1 [OK]
57 select_fault = -1 EFAULT [OK]
58 stat_blah = -1 ENOENT [OK]
59 stat_fault = -1 EFAULT [OK]
60 symlink_root = -1 EEXIST [OK]
61 unlink_root = -1 EISDIR [OK]
62 unlink_blah = -1 ENOENT [OK]
63 wait_child = -1 ECHILD [OK]
64 waitpid_min = -1 ESRCH [OK]
65 waitpid_child = -1 ECHILD [OK]
66 write_badf = -1 EBADF [OK]
67 write_zero = 0 [OK]
Errors during this test: 0
Running test 'stdlib'
0 getenv_TERM = <linux> [OK]
1 getenv_blah = <(null)> [OK]
2 setcmp_blah_blah = 0 [OK]
3 setcmp_blah_blah2 = -50 [OK]
4 setncmp_blah_blah = 0 [OK]
5 setncmp_blah_blah4 = 0 [OK]
6 setncmp_blah_blah5 = -53 [OK]
7 setncmp_blah_blah6 = -54 [OK]
8 strchr_foobar_o = <oobar> [OK]
9 strchr_foobar_z = <(null)> [OK]
10 strrchr_foobar_o = <obar> [OK]
11 strrchr_foobar_z = <(null)> [OK]
12 memcmp_20_20 = 0 [OK]
13 memcmp_20_60 = -64 [OK]
14 memcmp_60_20 = 64 [OK]
15 memcmp_20_e0 = -192 [OK]
16 memcmp_e0_20 = 192 [OK]
17 memcmp_80_e0 = -96 [OK]
18 memcmp_e0_80 = 96 [OK]
19 limit_int8_max = 127 [OK]
20 limit_int8_min = -128 [OK]
21 limit_uint8_max = 255 [OK]
22 limit_int16_max = 32767 [OK]
23 limit_int16_min = -32768 [OK]
24 limit_uint16_max = 65535 [OK]
25 limit_int32_max = 2147483647 [OK]
26 limit_int32_min = -2147483648 [OK]
27 limit_uint32_max = 4294967295 [OK]
28 limit_int64_max = 9223372036854775807 [OK]
29 limit_int64_min = -9223372036854775808 [OK]
30 limit_uint64_max = -1 [OK]
31 limit_int_least8_max = 127 [OK]
32 limit_int_least8_min = -128 [OK]
33 limit_uint_least8_max = 255 [OK]
34 limit_int_least16_max = 32767 [OK]
35 limit_int_least16_min = -32768 [OK]
36 limit_uint_least16_max = 65535 [OK]
37 limit_int_least32_max = 2147483647 [OK]
38 limit_int_least32_min = -2147483648 [OK]
39 limit_uint_least32_max = 4294967295 [OK]
40 limit_int_least64_min = -9223372036854775808 [OK]
41 limit_int_least64_max = 9223372036854775807 [OK]
42 limit_uint_least64_max = -1 [OK]
43 limit_int_fast8_max = 127 [OK]
44 limit_int_fast8_min = -128 [OK]
45 limit_uint_fast8_max = 255 [OK]
46 limit_int_fast16_min = -9223372036854775808 [OK]
47 limit_int_fast16_max = 9223372036854775807 [OK]
48 limit_uint_fast16_max = -1 [OK]
49 limit_int_fast32_min = -9223372036854775808 [OK]
50 limit_int_fast32_max = 9223372036854775807 [OK]
51 limit_uint_fast32_max = -1 [OK]
52 limit_int_fast64_min = -9223372036854775808 [OK]
53 limit_int_fast64_max = 9223372036854775807 [OK]
54 limit_uint_fast64_max = -1 [OK]
56 limit_intptr_min = -9223372036854775808 [OK]
57 limit_intptr_max = 9223372036854775807 [OK]
58 limit_uintptr_max = -1 [OK]
59 limit_ptrdiff_min = -9223372036854775808 [OK]
60 limit_ptrdiff_max = 9223372036854775807 [OK]
61 limit_size_max = -1 [OK]
Errors during this test: 0
Running test 'protection'
0 -fstackprotector [OK]
Errors during this test: 0
Total number of errors: 0
Leaving init with final status: 0
[ 4.159544] rcu-torture: Unscheduled system shutdown detected
[ 4.889246] ACPI: PM: Preparing to enter system sleep state S5
[ 4.890593] reboot: Power down
On Tue, Mar 28, 2023 at 11:29:53AM -0700, Paul E. McKenney wrote:
> I have queued this for the v6.5 merge window, thank you! If urgency
> does develop in the next couple of days, please let me know, and I will
> see what I can do about moving it to the v6.4 pile.
Thank you!
> I got this from "make run" (after merging with v6.3-rc3 as discussed
> earlier):
>
> make[1]: Leaving directory '/home/git/linux-build'
> 126 test(s) passed.
>
> This differs from your results, so please see below for the run.out file.
> (I see 126 instances of "[OK]".)
Oh you're right! I indeed found no FAIL so it was OK for me and I didn't
pay attention but it's "just" a matter of message appearing on the console
in the middle of the test:
$ diff -u paul.out willy.out |less
--- paul.out 2023-03-28 20:38:40.079920385 +0200
+++ willy.out 2023-03-28 20:39:04.534900530 +0200
@@ -130,11 +130,11 @@
Errors during this test: 0
Running test 'protection'
-0 -fstackprotector [OK]
+0 -fstackprotector [ 2.696920] init (47) used greatest stack depth: 14536 bytes left
+ [OK]
Errors during this test: 0
We've had a few occurrences of garbaged outputs like this, so I think I
should improve the test to count OK/FAIL/SKIPPED so that we can be more
confident in the output when seeing 0 FAIL for example. I suspect that
above it could be related to the long chain we've seen during the 6.3-rc1
crash, that went down into the random code, because probably that this
first-time initialization can enlarge the stack a little bit.
In my case, I just applied all the nolibc patches on top of 6.3-rc4 to
run the test so our kernels are slightly different (since my branch
based on rcu-03.20a did still originate from the 6.3-rc1 thus it was
failing to boot like you faced previously).
Maybe I should also improve the grep to try to look for patterns looking
exactly like this (test numer and name followed by a warning).
> But this from "make run-user":
>
> CC nolibc-test
> 124 test(s) passed
>
> The output of "grep -v "\[OK]" run.out" is as follows:
>
> Running test 'syscall'
> 18 chroot_root [SKIPPED]
> 43 link_dir [SKIPPED]
> Errors during this test: 0
>
> Running test 'stdlib'
> Errors during this test: 0
>
> Running test 'protection'
> Errors during this test: 0
>
> Total number of errors: 0
> Exiting with status 0
>
> I am guessing is that this is because I am too cowardly to run this
> test with root privileges, but thought I should run it by you.
Yes exactly, that's why I've added getuid() support lately, in order to
skip these two tests when not root (because I cowardly refuse to run
this test as root as well and don't want to get used to seeing "normal"
failures).
Thus what you're seeing is OK overall. There's just this message that
appears now on top of -rc4, I'll retry later on top of -rc3 (probably
not before this week-end, I'm still having other stuff to do), but so
far so good.
Thank you!
Willy
On Tue, Mar 28, 2023 at 08:51:52PM +0200, Willy Tarreau wrote:
> On Tue, Mar 28, 2023 at 11:29:53AM -0700, Paul E. McKenney wrote:
> > I have queued this for the v6.5 merge window, thank you! If urgency
> > does develop in the next couple of days, please let me know, and I will
> > see what I can do about moving it to the v6.4 pile.
>
> Thank you!
>
> > I got this from "make run" (after merging with v6.3-rc3 as discussed
> > earlier):
> >
> > make[1]: Leaving directory '/home/git/linux-build'
> > 126 test(s) passed.
> >
> > This differs from your results, so please see below for the run.out file.
> > (I see 126 instances of "[OK]".)
>
> Oh you're right! I indeed found no FAIL so it was OK for me and I didn't
> pay attention but it's "just" a matter of message appearing on the console
> in the middle of the test:
>
> $ diff -u paul.out willy.out |less
> --- paul.out 2023-03-28 20:38:40.079920385 +0200
> +++ willy.out 2023-03-28 20:39:04.534900530 +0200
> @@ -130,11 +130,11 @@
> Errors during this test: 0
>
> Running test 'protection'
> -0 -fstackprotector [OK]
> +0 -fstackprotector [ 2.696920] init (47) used greatest stack depth: 14536 bytes left
> + [OK]
> Errors during this test: 0
>
> We've had a few occurrences of garbaged outputs like this, so I think I
> should improve the test to count OK/FAIL/SKIPPED so that we can be more
> confident in the output when seeing 0 FAIL for example. I suspect that
> above it could be related to the long chain we've seen during the 6.3-rc1
> crash, that went down into the random code, because probably that this
> first-time initialization can enlarge the stack a little bit.
>
> In my case, I just applied all the nolibc patches on top of 6.3-rc4 to
> run the test so our kernels are slightly different (since my branch
> based on rcu-03.20a did still originate from the 6.3-rc1 thus it was
> failing to boot like you faced previously).
>
> Maybe I should also improve the grep to try to look for patterns looking
> exactly like this (test numer and name followed by a warning).
Good point!
> > But this from "make run-user":
> >
> > CC nolibc-test
> > 124 test(s) passed
> >
> > The output of "grep -v "\[OK]" run.out" is as follows:
> >
> > Running test 'syscall'
> > 18 chroot_root [SKIPPED]
> > 43 link_dir [SKIPPED]
> > Errors during this test: 0
> >
> > Running test 'stdlib'
> > Errors during this test: 0
> >
> > Running test 'protection'
> > Errors during this test: 0
> >
> > Total number of errors: 0
> > Exiting with status 0
> >
> > I am guessing is that this is because I am too cowardly to run this
> > test with root privileges, but thought I should run it by you.
>
> Yes exactly, that's why I've added getuid() support lately, in order to
> skip these two tests when not root (because I cowardly refuse to run
> this test as root as well and don't want to get used to seeing "normal"
> failures).
>
> Thus what you're seeing is OK overall. There's just this message that
> appears now on top of -rc4, I'll retry later on top of -rc3 (probably
> not before this week-end, I'm still having other stuff to do), but so
> far so good.
Thank you for looking this over!
Thanx, Paul