Several Qualcomm based chipsets can support USB audio offloading to a
dedicated audio DSP, which can take over issuing transfers to the USB
host controller. The intention is to reduce the load on the main
processors in the SoC, and allow them to be placed into lower power modes.
There are several parts to this design:
1. Adding ASoC binding layer
2. Create a USB backend for Q6DSP
3. Introduce XHCI interrupter support
4. Create vendor ops for the USB SND driver
USB | ASoC
--------------------------------------------------------------------
| _________________________
| |sm8250 platform card |
| |_________________________|
| | |
| ___V____ ____V____
| |Q6USB | |Q6AFE |
| |"codec" | |"cpu" |
| |________| |_________|
| ^ ^ ^
| | |________|
| ___V____ |
| |SOC-USB | |
________ ________ | | |
|USB SND |<--->|QC offld|<------------>|________| |
|(card.c)| | |<---------- |
|________| |________|___ | | |
^ ^ | | | ____________V_________
| | | | | |APR/GLINK |
__ V_______________V_____ | | | |______________________|
|USB SND (endpoint.c) | | | | ^
|_________________________| | | | |
^ | | | ___________V___________
| | | |->|audio DSP |
___________V_____________ | | |_______________________|
|XHCI HCD |<- |
|_________________________| |
Adding ASoC binding layer:
soc-usb: Intention is to treat a USB port similar to a headphone jack.
The port is always present on the device, but cable/pin status can be
enabled/disabled. Expose mechanisms for USB backend ASoC drivers to
communicate with USB SND.
Create a USB backend for Q6DSP:
q6usb: Basic backend driver that will be responsible for maintaining the
resources needed to initiate a playback stream using the Q6DSP. Will
be the entity that checks to make sure the connected USB audio device
supports the requested PCM format. If it does not, the PCM open call will
fail, and userpsace ALSA can take action accordingly.
Introduce XHCI interrupter support:
XHCI HCD supports multiple interrupters, which allows for events to be routed
to different event rings. This is determined by "Interrupter Target" field
specified in Section "6.4.1.1 Normal TRB" of the XHCI specification.
Events in the offloading case will be routed to an event ring that is assigned
to the audio DSP.
Create vendor ops for the USB SND driver:
qc_audio_offload: This particular driver has several components associated
with it:
- QMI stream request handler
- XHCI interrupter and resource management
- audio DSP memory management
When the audio DSP wants to enable a playback stream, the request is first
received by the ASoC platform sound card. Depending on the selected route,
ASoC will bring up the individual DAIs in the path. The Q6USB backend DAI
will send an AFE port start command (with enabling the USB playback path), and
the audio DSP will handle the request accordingly.
Part of the AFE USB port start handling will have an exchange of control
messages using the QMI protocol. The qc_audio_offload driver will populate the
buffer information:
- Event ring base address
- EP transfer ring base address
and pass it along to the audio DSP. All endpoint management will now be handed
over to the DSP, and the main processor is not involved in transfers.
Overall, implementing this feature will still expose separate sound card and PCM
devices for both the platorm card and USB audio device:
0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D
SM8250-MTP-WCD9380-WSA8810-VA-DMIC
1 [Audio ]: USB-Audio - USB Audio
Generic USB Audio at usb-xhci-hcd.1.auto-1.4, high speed
This is to ensure that userspace ALSA entities can decide which route to take
when executing the audio playback. In the above, if card#1 is selected, then
USB audio data will take the legacy path over the USB PCM drivers, etc...
This feature was validated using:
- tinymix: set/enable the multimedia path to route to USB backend
- tinyplay: issue playback on platform card
Requesting to see if we can get some Acked-By tags, and merge on usb-next.
Changelog
--------------------------------------------
Changes in v20:
- Fixed up some formatting changes pointed out in the usb.rst
- Added SB null check during XHCI sideband unregister in case caller passes
improper argument (xhci_sideband_unregister())
Changes in v19:
- Rebased to usb-next to account for some new changes in dependent drivers.
Changes in v18:
- Rebased to usb-next, which merged in part of the series. Removed these patches.
- Reworked Kconfigs for the ASoC USB related components from QCOM Q6DSP drivers
to keep dependencies in place for SoC USB and USB SND.
- Removed the repurposing of the stop ep sync API into existing XHCI operations.
This will be solely used by the XHCI sideband for now.
Changes in v17:
- Fixed an issue where one patch was squashed into another.
- Re-added some kconfig checks for helpers exposed in USB SND for the soc usb
driver, after running different kconfigs.
Changes in v16:
- Modified some code layer dependencies so that soc usb can be split as a separate
module.
- Split the kcontrols from ASoC QCOM common layer into a separate driver
- Reworked SOC USB kcontrols for controlling card + pcm offload routing and status
so that there are individual controls for card and pcm devices.
- Added a kcontrol remove API in SOC USB to remove the controls on the fly. This
required to add some kcontrol management to SOC USB.
- Removed the disconnect work and workqueue for the QC USB offload as it is not
required, since QMI interface driver ensures events are handled in its own WQ.
Changes in v15:
- Removed some already merged XHCI changes
- Separated SOC USB driver from being always compiled into SOC core. Now
configurable from kconfig.
- Fixed up ASoC kcontrol naming to fit guidelines.
- Removed some unnecessary dummy ifdefs.
- Moved usb snd offload capable kcontrol to be initialized by the platform offloading
driver.
Changes in v14:
- Cleaned up some USB SND related feedback:
- Renamed SNDUSB OFFLD playback available --> USB offload capable card
- Fixed locking while checking if stream is in use
- Replaced some mutex pairs with guard(mutex)
Changes in v13:
- Pulled in secondary/primary interrupter rework from Mathias from:
https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/drivers/usb/host?h=fix_eventhandling
- Did some cleanup and commit message updates, and tested on current code base.
- Added mutex locking to xhci sideband to help prevent any race conditions, esp. for when accessing shared
references.
- Addresed concerns from Hillf about gfp_flags and locking used in qc_usb_audio_offload.
- Rebased onto usb-next
Changes in v12:
- Updated copyright year to 2024. Happy new years!
- Fixed newline format on mixer offload driver.
Changes in v11:
- Modified QMI format structures to be const
Changes in v10:
- Added new mixer for exposing kcontrol for sound card created by USB SND. This
allows for applications to know which platform sound card has offload support.
Will return the card number.
- Broke down and cleaned up some functions/APIs within qc_audio_offload driver.
- Exported xhci_initialize_ring_info(), and modified XHCI makefile to allow for
the XHCI sideband to exist as a module.
- Reworked the jack registration and moved it to the QCOM platform card driver,
ie sm8250.
- Added an SOC USB API to fetch a standard component tag that can be appended to
the platform sound card. Added this tag to sm8250 if any USB path exists within
the DT node.
- Moved kcontrols that existed in the Q6USB driver, and made it a bit more generic,
so that naming can be standardized across solutions. SOC USB is now responsible
for creation of these kcontrols.
- Added a SOC USB RST document explaining some code flows and implementation details
so that other vendors can utilize the framework.
- Addressed a case where USB device connection events are lost if usb offload driver
(qc_audio_offload) is not probed when everything else has been initialized, ie
USB SND, SOC USB and ASoC sound card. Add a rediscover device call during module
init, to ensure that connection events will be propagated.
- Rebased to usb-next.
Changes in v9:
- Fixed the dt binding check issue with regards to num-hc-interrupters.
Changes in v8:
- Cleaned up snd_soc_usb_find_priv_data() based on Mark's feedback. Removed some of
the duplicate looping code that was present on previous patches. Also renamed the API.
- Integrated Mathias' suggestions on his new sideband changes:
https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feature_interrupters
- Addressed some of Mathias' fixme tags, such as:
- Resetting transfer ring dequeue/enqueue pointers
- Issuing stop endpoint command during ep removal
- Reset ERDP properly to first segment ring during interrupter removal. (this is currently
just being cleared to 0, but should be pointing to a valid segment if controller is still
running.
Changes in v7:
- Fixed dt check error for q6usb bindings
- Updated q6usb property from qcom,usb-audio-intr-num --> qcom,usb-audio-intr-idx
- Removed separate DWC3 HC interrupters num property, and place limits to XHCI one.
- Modified xhci_ring_to_sgtable() to use assigned IOVA/DMA address to fetch pages, as
it is not ensured event ring allocated is always done in the vmalloc range.
Changes in v6:
- Fixed limits and description on several DT bindings (XHCI and Q6USB)
- Fixed patch subjects to follow other ALSA/ASoC notations.
USB SND
- Addressed devices which expose multiple audio (UAC) interfaces. These devices will
create a single USB sound card with multiple audio streams, and receive multiple
interface probe routines. QC offload was not properly considering cases with multiple
probe calls.
- Renamed offload module name and kconfig to fit within the SND domain.
- Renamed attach/detach endpoint API to keep the hw_params notation.
Changes in v5:
- Removed some unnescessary files that were included
- Fixed some typos mentioned
- Addressed dt-binding issues and added hc-interrupters definition to usb-xhci.yaml
XHCI:
- Moved secondary skip events API to xhci-ring and updated implementation
- Utilized existing XHCI APIs, such as inc_deq and xhci_update_erst_dequeue()
USB SND
- Renamed and reworked the APIs in "sound: usb: Export USB SND APIs for modules" patch to
include suggestions to utilize snd_usb_hw_params/free and to avoid generic naming.
- Added a resume_cb() op for completion sake.
- Addressed some locking concerns with regards to when registering for platform hooks.
- Added routine to disconnect all offloaded devices during module unbind.
ASoC
- Replaced individual PCM parameter arguments in snd_soc_usb_connect() with new
snd_soc_usb_device structure to pass along PCM info.
- Modified snd_jack set report to notify HEADPHONE event, as we do not support record path.
Changes in v4:
- Rebased to xhci/for-usb-next
- Addressed some dt-bindings comments
XHCI:
- Pulled in latest changes from Mathias' feature_interrupters branch:
https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feature_interrupters
- Fixed commit text and signage for the XHCI sideband/interrupter related changes
- Added some logic to address the FIXME tags mentioned throughout the commits, such
as handling multi segment rings and building the SGT, locking concerns, and ep
cleanup operations.
- Removed some fixme tags for conditions that may not be needed/addressed.
- Repurposed the new endpoint stop sync API to be utilized in other places.
- Fixed potential compile issue if XHCI sideband config is not defined.
ASoC:
- Added sound jack control into the Q6USB driver. Allows for userpsace to know when
an offload capable device is connected.
USB SND:
- Avoided exporting _snd_pcm_hw_param_set based on Takashi's recommendation.
- Split USB QMI packet header definitions into a separate commit. This is used to
properly allow the QMI interface driver to parse and route QMI packets accordingly
- Added a "depends on" entry when enabling QC audio offload to avoid compile time
issues.
Changes in v3:
- Changed prefix from RFC to PATCH
- Rebased entire series to usb-next
- Updated copyright years
XHCI:
- Rebased changes on top of XHCI changes merged into usb-next, and only added
changes that were still under discussion.
- Added change to read in the "num-hc-interrupters" device property.
ASoC:
- qusb6 USB backend
- Incorporated suggestions to fetch iommu information with existing APIs
- Added two new sound kcontrols to fetch offload status and offload device
selection.
- offload status - will return the card and pcm device in use
tinymix -D 0 get 1 --> 1, 0 (offload in progress on card#1 pcm#0)
- device selection - set the card and pcm device to enable offload on. Ex.:
tinymix -D 0 set 1 2 0 --> sets offload on card#2 pcm#0
(this should be the USB card)
USB SND:
- Fixed up some locking related concerns for registering platform ops.
- Moved callbacks under the register_mutex, so that
- Modified APIs to properly pass more information about the USB SND device, so
that the Q6USB backend can build a device list/map, in order to monitor offload
status and device selection.
Changes in v2:
XHCI:
- Replaced XHCI and HCD changes with Mathias' XHCI interrupter changes
in his tree:
https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=feature_interrupters
Adjustments made to Mathias' changes:
- Created xhci-intr.h to export/expose interrupter APIs versus exposing xhci.h.
Moved dependent structures to this file as well. (so clients can parse out
information from "struct xhci_interrupter")
- Added some basic locking when requesting interrupters.
- Fixed up some sanity checks.
- Removed clearing of the ERSTBA during freeing of the interrupter. (pending
issue where SMMU fault occurs if DMA addr returned is 64b - TODO)
- Clean up pending events in the XHCI secondary interrupter. While testing USB
bus suspend, it was seen that on bus resume, the xHCI HC would run into a command
timeout.
- Added offloading APIs to xHCI to fetch transfer and event ring information.
ASoC:
- Modified soc-usb to allow for multiple USB port additions. For this to work,
the USB offload driver has to have a reference to the USB backend by adding
a "usb-soc-be" DT entry to the device saved into XHCI sysdev.
- Created separate dt-bindings for defining USB_RX port.
- Increased APR timeout to accommodate the situation where the AFE port start
command could be delayed due to having to issue a USB bus resume while
handling the QMI stream start command.
USB SND:
- Added a platform ops during usb_audio_suspend(). This allows for the USB
offload driver to halt the audio stream when system enters PM suspend. This
ensures the audio DSP is not issuing transfers on the USB bus.
- Do not override platform ops if they are already populated.
- Introduce a shared status variable between the USB offload and USB SND layers,
to ensure that only one path is active at a time. If the USB bus is occupied,
then userspace is notified that the path is busy.
Mathias Nyman (2):
xhci: add helper to stop endpoint and wait for completion
xhci: sideband: add initial api to register a sideband entity
Wesley Cheng (39):
usb: host: xhci: Export enable and disable interrupter APIs
usb: host: xhci: Repurpose event handler for skipping interrupter
events
xhci: export XHCI IMOD setting helper for interrupters
usb: host: xhci-sideband: Expose a sideband interrupter enable API
usb: host: xhci-mem: Cleanup pending secondary event ring events
usb: host: xhci-mem: Allow for interrupter clients to choose specific
index
ASoC: Add SOC USB APIs for adding an USB backend
ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
ASoC: qdsp6: q6afe: Increase APR timeout
ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
ALSA: usb-audio: Introduce USB SND platform op callbacks
ALSA: usb-audio: Export USB SND APIs for modules
ALSA: usb-audio: Save UAC sample size information
usb: dwc3: Specify maximum number of XHCI interrupters
usb: host: xhci-plat: Set XHCI max interrupters if property is present
ALSA: usb-audio: qcom: Add USB QMI definitions
ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
ALSA: usb-audio: Check for support for requested audio format
ASoC: usb: Add PCM format check API for USB backend
ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device
ALSA: usb-audio: Prevent starting of audio stream if in use
ALSA: usb-audio: Do not allow USB offload path if PCM device is in use
ASoC: dt-bindings: Update example for enabling USB offload on SM8250
ALSA: usb-audio: qcom: Populate PCM and USB chip information
ASoC: qcom: qdsp6: Add support to track available USB PCM devices
ASoC: Introduce SND kcontrols to select sound card and PCM device
ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks
ASoC: Introduce SND kcontrols to track USB offloading state
ASoC: qcom: qdsp6: Add PCM ops to track current state
ASoC: usb: Create SOC USB SND jack kcontrol
ASoC: qcom: qdsp6: Add headphone jack for offload connection status
ASoC: usb: Fetch ASoC sound card information
ALSA: usb-audio: Add USB offloading capable kcontrol
ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
ALSA: usb-audio: qcom: Use card and PCM index from QMI request
ASoC: usb: Rediscover USB SND devices on USB port add
ASoC: qcom: Populate SoC components string
ASoC: doc: Add documentation for SOC USB
.../bindings/sound/qcom,sm8250.yaml | 15 +
Documentation/sound/soc/index.rst | 1 +
Documentation/sound/soc/usb.rst | 611 ++++++
drivers/usb/dwc3/core.c | 12 +
drivers/usb/dwc3/core.h | 2 +
drivers/usb/dwc3/host.c | 3 +
drivers/usb/host/Kconfig | 9 +
drivers/usb/host/Makefile | 2 +
drivers/usb/host/xhci-mem.c | 37 +-
drivers/usb/host/xhci-plat.c | 2 +
drivers/usb/host/xhci-ring.c | 50 +-
drivers/usb/host/xhci-sideband.c | 444 ++++
drivers/usb/host/xhci.c | 48 +-
drivers/usb/host/xhci.h | 18 +-
.../sound/qcom,q6dsp-lpass-ports.h | 1 +
include/linux/usb/xhci-sideband.h | 70 +
include/sound/q6usboffload.h | 20 +
include/sound/soc-usb.h | 182 ++
sound/soc/Kconfig | 10 +
sound/soc/Makefile | 2 +
sound/soc/qcom/Kconfig | 15 +
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6afe-dai.c | 60 +
sound/soc/qcom/qdsp6/q6afe.c | 193 +-
sound/soc/qcom/qdsp6/q6afe.h | 36 +-
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 +
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 +
sound/soc/qcom/qdsp6/q6routing.c | 9 +
sound/soc/qcom/qdsp6/q6usb.c | 408 ++++
sound/soc/qcom/sm8250.c | 15 +-
sound/soc/qcom/usb_offload_utils.c | 51 +
sound/soc/qcom/usb_offload_utils.h | 26 +
sound/soc/soc-usb.c | 660 ++++++
sound/usb/Kconfig | 25 +
sound/usb/Makefile | 2 +-
sound/usb/card.c | 109 +
sound/usb/card.h | 15 +
sound/usb/endpoint.c | 1 +
sound/usb/format.c | 1 +
sound/usb/helper.c | 1 +
sound/usb/pcm.c | 104 +-
sound/usb/pcm.h | 11 +
sound/usb/qcom/Makefile | 6 +
sound/usb/qcom/mixer_usb_offload.c | 65 +
sound/usb/qcom/mixer_usb_offload.h | 17 +
sound/usb/qcom/qc_audio_offload.c | 1914 +++++++++++++++++
sound/usb/qcom/usb_audio_qmi_v01.c | 892 ++++++++
sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++
49 files changed, 6311 insertions(+), 53 deletions(-)
create mode 100644 Documentation/sound/soc/usb.rst
create mode 100644 drivers/usb/host/xhci-sideband.c
create mode 100644 include/linux/usb/xhci-sideband.h
create mode 100644 include/sound/q6usboffload.h
create mode 100644 include/sound/soc-usb.h
create mode 100644 sound/soc/qcom/qdsp6/q6usb.c
create mode 100644 sound/soc/qcom/usb_offload_utils.c
create mode 100644 sound/soc/qcom/usb_offload_utils.h
create mode 100644 sound/soc/soc-usb.c
create mode 100644 sound/usb/qcom/Makefile
create mode 100644 sound/usb/qcom/mixer_usb_offload.c
create mode 100644 sound/usb/qcom/mixer_usb_offload.h
create mode 100644 sound/usb/qcom/qc_audio_offload.c
create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c
create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h
Expose helpers in the SoC USB layer so components can update and keep track
of the offloading sessions. This exposes a kcontrol to userspace, so that
applications can be aware of what the current USB offloading status is.
An example output using tinymix is:
USB offloading idle:
tinymix -D 0 get 'USB Offload Playback Route Status'
-->-1, -1 (range -1->32)
USB offloading active(USB card#1 pcm#0):
tinymix -D 0 get 'USB Offload Playback Route Status'
-->1, 0 (range -1->32)
Signed-off-by: Wesley Cheng <[email protected]>
---
include/sound/soc-usb.h | 46 +++++++++++
sound/soc/soc-usb.c | 176 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 222 insertions(+)
diff --git a/include/sound/soc-usb.h b/include/sound/soc-usb.h
index 18cdc59df9aa..5e6076f65a41 100644
--- a/include/sound/soc-usb.h
+++ b/include/sound/soc-usb.h
@@ -9,9 +9,29 @@
enum snd_soc_usb_kctl {
SND_SOC_USB_KCTL_CARD_ROUTE,
SND_SOC_USB_KCTL_PCM_ROUTE,
+ SND_SOC_USB_KCTL_CARD_STATUS,
+ SND_SOC_USB_KCTL_PCM_STATUS,
SND_SOC_USB_KCTL_MAX,
};
+enum snd_soc_usb_dai_state {
+ SND_SOC_USB_IDLE,
+ SND_SOC_USB_PREPARED,
+ SND_SOC_USB_RUNNING,
+};
+
+/**
+ * struct snd_soc_usb_session
+ * @active_card_idx - active offloaded sound card
+ * @active_pcm_idx - active offloaded PCM device
+ * @state - USB BE DAI link PCM state
+ */
+struct snd_soc_usb_session {
+ int active_card_idx;
+ int active_pcm_idx;
+ enum snd_soc_usb_dai_state state;
+};
+
/**
* struct snd_soc_usb_device
* @card_idx - sound card index associated with USB device
@@ -31,6 +51,7 @@ struct snd_soc_usb_device {
* @list - list head for SND SOC struct list
* @component - reference to ASoC component
* @kctl - list of kcontrols created
+ * @active_list - active sessions
* @num_supported_streams - number of supported concurrent sessions
* @connection_status_cb - callback to notify connection events
* @put_offload_dev - callback to select USB sound card/PCM device
@@ -41,6 +62,7 @@ struct snd_soc_usb {
struct list_head list;
struct snd_soc_component *component;
struct snd_kcontrol *kctl[SND_SOC_USB_KCTL_MAX];
+ struct snd_soc_usb_session *active_list;
unsigned int num_supported_streams;
int (*connection_status_cb)(struct snd_soc_usb *usb,
struct snd_soc_usb_device *sdev, bool connected);
@@ -62,6 +84,11 @@ int snd_soc_usb_connect(struct device *usbdev, struct snd_soc_usb_device *sdev);
int snd_soc_usb_disconnect(struct device *usbdev, struct snd_soc_usb_device *sdev);
void *snd_soc_usb_find_priv_data(struct device *dev);
+int snd_soc_usb_prepare_session(struct snd_soc_usb *usb, int card_idx, int pcm_idx);
+int snd_soc_usb_shutdown_session(struct snd_soc_usb *usb, int session_id);
+int snd_soc_usb_set_session_state(struct snd_soc_usb *usb, int session_id,
+ enum snd_soc_usb_dai_state state);
+
struct snd_soc_usb *snd_soc_usb_allocate_port(struct snd_soc_component *component,
int num_streams, void *data);
void snd_soc_usb_free_port(struct snd_soc_usb *usb);
@@ -97,6 +124,25 @@ static inline void *snd_soc_usb_find_priv_data(struct device *dev)
return NULL;
}
+static inline int snd_soc_usb_prepare_session(struct snd_soc_usb *usb, int card_idx,
+ int pcm_idx)
+{
+ return -EINVAL;
+}
+
+static inline int snd_soc_usb_shutdown_session(struct snd_soc_usb *usb,
+ int session_id)
+{
+ return -EINVAL;
+}
+
+static inline int snd_soc_usb_set_session_state(struct snd_soc_usb *usb,
+ int session_id,
+ enum snd_soc_usb_dai_state state)
+{
+ return -EINVAL;
+}
+
static inline struct snd_soc_usb *snd_soc_usb_allocate_port(
struct snd_soc_component *component,
int num_streams, void *data)
diff --git a/sound/soc/soc-usb.c b/sound/soc/soc-usb.c
index ade09b416d45..e291f146a79d 100644
--- a/sound/soc/soc-usb.c
+++ b/sound/soc/soc-usb.c
@@ -42,6 +42,79 @@ static struct snd_soc_usb *snd_soc_find_usb_ctx(struct device_node *node)
}
/* SOC USB sound kcontrols */
+static int snd_soc_usb_get_offload_card_status(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_usb *ctx = snd_soc_find_usb_ctx(component->dev->of_node);
+ int control_idx = 0;
+ int card_idx;
+ int i;
+
+ for (i = 0; i < ctx->num_supported_streams; i++) {
+ card_idx = -1;
+
+ if (ctx->active_list[i].state == SND_SOC_USB_RUNNING)
+ card_idx = ctx->active_list[i].active_card_idx;
+
+ ucontrol->value.integer.value[control_idx] = card_idx;
+ control_idx++;
+ }
+
+ return 0;
+}
+
+static int snd_soc_usb_offload_card_status_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_usb *ctx = snd_soc_find_usb_ctx(component->dev->of_node);
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = ctx->num_supported_streams;
+ uinfo->value.integer.min = -1;
+ uinfo->value.integer.max = SNDRV_CARDS;
+
+ return 0;
+}
+
+static int snd_soc_usb_get_offload_pcm_status(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_usb *ctx = snd_soc_find_usb_ctx(component->dev->of_node);
+ int control_idx = 0;
+ int pcm_idx;
+ int i;
+
+ for (i = 0; i < ctx->num_supported_streams; i++) {
+ pcm_idx = -1;
+
+ if (ctx->active_list[i].state == SND_SOC_USB_RUNNING)
+ pcm_idx = ctx->active_list[i].active_pcm_idx;
+
+ ucontrol->value.integer.value[control_idx] = pcm_idx;
+ control_idx++;
+ }
+
+ return 0;
+}
+
+static int snd_soc_usb_offload_pcm_status_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_usb *ctx = snd_soc_find_usb_ctx(component->dev->of_node);
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = ctx->num_supported_streams;
+ uinfo->value.integer.min = -1;
+ /* Arbitrary max value, as there is no 'limit' on number of PCM devices */
+ uinfo->value.integer.max = 0xff;
+
+ return 0;
+}
+
static int soc_usb_put_offload_pcm_dev(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -152,6 +225,22 @@ static const struct snd_kcontrol_new soc_usb_kcontrols[] = {
.get = soc_usb_get_offload_pcm_dev,
.put = soc_usb_put_offload_pcm_dev,
},
+ [SND_SOC_USB_KCTL_CARD_STATUS] = {
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .name = "USB Offload Playback Route Card Status",
+ .info = snd_soc_usb_offload_card_status_info,
+ .get = snd_soc_usb_get_offload_card_status,
+ .put = NULL,
+ },
+ [SND_SOC_USB_KCTL_PCM_STATUS] = {
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .name = "USB Offload Playback Route PCM Status",
+ .info = snd_soc_usb_offload_pcm_status_info,
+ .get = snd_soc_usb_get_offload_pcm_status,
+ .put = NULL,
+ },
};
static int snd_soc_usb_control_remove(struct snd_soc_usb *usb)
@@ -187,6 +276,85 @@ static int snd_soc_usb_control_init(struct snd_soc_usb *usb)
return ret;
}
+/**
+ * snd_soc_usb_set_session_state() - Set the session state for a session
+ * @usb: SOC USB device
+ * @session_id: index to active_list
+ * @state: USB PCM device index
+ *
+ * Set the session state for an entry in active_list. This should be only
+ * called after snd_soc_usb_prepare_session.
+ *
+ * Returns 0 on success, negative on error.
+ *
+ */
+int snd_soc_usb_set_session_state(struct snd_soc_usb *usb, int session_id,
+ enum snd_soc_usb_dai_state state)
+{
+ if (session_id < 0 || session_id >= usb->num_supported_streams)
+ return -EINVAL;
+
+ mutex_lock(&ctx_mutex);
+ if (usb->active_list[session_id].state == state) {
+ mutex_unlock(&ctx_mutex);
+ return 0;
+ }
+
+ usb->active_list[session_id].state = state;
+ mutex_unlock(&ctx_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_set_session_state);
+
+/**
+ * snd_soc_usb_prepare_session() - Find and prepare a session
+ * @usb: SOC USB device
+ * @card_idx: USB card index
+ * @pcm_idx: USB PCM device index
+ *
+ * Find an open active session slot on the SOC USB device. If all slots
+ * are busy, return an error. If not, claim the slot and place it into
+ * the SND_SOC_USB_PREPARED state. This should be called first before
+ * calling snd_soc_usb_set_session_state or snd_soc_usb_shutdown_session.
+ *
+ * Returns the session id (index) to active_list, negative on error.
+ *
+ */
+int snd_soc_usb_prepare_session(struct snd_soc_usb *usb, int card_idx, int pcm_idx)
+{
+ int i;
+
+ mutex_lock(&ctx_mutex);
+ for (i = 0; i < usb->num_supported_streams; i++) {
+ if (usb->active_list[i].state == SND_SOC_USB_IDLE) {
+ usb->active_list[i].active_card_idx = card_idx;
+ usb->active_list[i].active_pcm_idx = pcm_idx;
+ usb->active_list[i].state = SND_SOC_USB_PREPARED;
+ mutex_unlock(&ctx_mutex);
+ return i;
+ }
+ }
+ mutex_unlock(&ctx_mutex);
+
+ return -EBUSY;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_prepare_session);
+
+/**
+ * snd_soc_usb_shutdown_session() - Set USB SOC to idle state
+ * @usb: SOC USB device
+ * @session_id: index to active_list
+ *
+ * Place the session specified by session_id into the idle/shutdown state.
+ *
+ */
+int snd_soc_usb_shutdown_session(struct snd_soc_usb *usb, int session_id)
+{
+ return snd_soc_usb_set_session_state(usb, session_id, SND_SOC_USB_IDLE);
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_shutdown_session);
+
/**
* snd_soc_usb_get_components_tag() - Retrieve SOC USB component tag
* @playback: direction of audio stream
@@ -273,6 +441,13 @@ struct snd_soc_usb *snd_soc_usb_allocate_port(struct snd_soc_component *componen
if (!usb)
return ERR_PTR(-ENOMEM);
+ usb->active_list = kcalloc(num_streams, sizeof(struct snd_soc_usb_session),
+ GFP_KERNEL);
+ if (!usb->active_list) {
+ kfree(usb);
+ return ERR_PTR(-ENOMEM);
+ }
+
usb->component = component;
usb->priv_data = data;
usb->num_supported_streams = num_streams;
@@ -291,6 +466,7 @@ EXPORT_SYMBOL_GPL(snd_soc_usb_allocate_port);
void snd_soc_usb_free_port(struct snd_soc_usb *usb)
{
snd_soc_usb_remove_port(usb);
+ kfree(usb->active_list);
kfree(usb);
}
EXPORT_SYMBOL_GPL(snd_soc_usb_free_port);
The Qualcomm USB audio offload driver utilizes the QMI protocol to
communicate with the audio DSP. Add the necessary QMI header and field
definitions, so the QMI interface driver is able to route the QMI packet
received to the USB audio offload driver.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/qcom/usb_audio_qmi_v01.c | 892 +++++++++++++++++++++++++++++
sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++++++
2 files changed, 1054 insertions(+)
create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c
create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h
diff --git a/sound/usb/qcom/usb_audio_qmi_v01.c b/sound/usb/qcom/usb_audio_qmi_v01.c
new file mode 100644
index 000000000000..5f61a8b1cef2
--- /dev/null
+++ b/sound/usb/qcom/usb_audio_qmi_v01.c
@@ -0,0 +1,892 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/soc/qcom/qmi.h>
+
+#include "usb_audio_qmi_v01.h"
+
+static const struct qmi_elem_info mem_info_v01_ei[] = {
+ {
+ .data_type = QMI_UNSIGNED_8_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u64),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct mem_info_v01, va),
+ },
+ {
+ .data_type = QMI_UNSIGNED_8_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u64),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct mem_info_v01, pa),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct mem_info_v01, size),
+ },
+ {
+ .data_type = QMI_EOTI,
+ .array_type = NO_ARRAY,
+ .tlv_type = QMI_COMMON_TLV_TYPE,
+ },
+};
+
+static const struct qmi_elem_info apps_mem_info_v01_ei[] = {
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct mem_info_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct apps_mem_info_v01, evt_ring),
+ .ei_array = mem_info_v01_ei,
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct mem_info_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct apps_mem_info_v01, tr_data),
+ .ei_array = mem_info_v01_ei,
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct mem_info_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct apps_mem_info_v01, tr_sync),
+ .ei_array = mem_info_v01_ei,
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct mem_info_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct apps_mem_info_v01, xfer_buff),
+ .ei_array = mem_info_v01_ei,
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct mem_info_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct apps_mem_info_v01, dcba),
+ .ei_array = mem_info_v01_ei,
+ },
+ {
+ .data_type = QMI_EOTI,
+ .array_type = NO_ARRAY,
+ .tlv_type = QMI_COMMON_TLV_TYPE,
+ },
+};
+
+static const struct qmi_elem_info usb_endpoint_descriptor_v01_ei[] = {
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_endpoint_descriptor_v01,
+ bLength),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_endpoint_descriptor_v01,
+ bDescriptorType),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_endpoint_descriptor_v01,
+ bEndpointAddress),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_endpoint_descriptor_v01,
+ bmAttributes),
+ },
+ {
+ .data_type = QMI_UNSIGNED_2_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u16),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_endpoint_descriptor_v01,
+ wMaxPacketSize),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_endpoint_descriptor_v01,
+ bInterval),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_endpoint_descriptor_v01,
+ bRefresh),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_endpoint_descriptor_v01,
+ bSynchAddress),
+ },
+ {
+ .data_type = QMI_EOTI,
+ .array_type = NO_ARRAY,
+ .tlv_type = QMI_COMMON_TLV_TYPE,
+ },
+};
+
+static const struct qmi_elem_info usb_interface_descriptor_v01_ei[] = {
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_interface_descriptor_v01,
+ bLength),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_interface_descriptor_v01,
+ bDescriptorType),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_interface_descriptor_v01,
+ bInterfaceNumber),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_interface_descriptor_v01,
+ bAlternateSetting),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_interface_descriptor_v01,
+ bNumEndpoints),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_interface_descriptor_v01,
+ bInterfaceClass),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_interface_descriptor_v01,
+ bInterfaceSubClass),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_interface_descriptor_v01,
+ bInterfaceProtocol),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0,
+ .offset = offsetof(struct usb_interface_descriptor_v01,
+ iInterface),
+ },
+ {
+ .data_type = QMI_EOTI,
+ .array_type = NO_ARRAY,
+ .tlv_type = QMI_COMMON_TLV_TYPE,
+ },
+};
+
+const struct qmi_elem_info qmi_uaudio_stream_req_msg_v01_ei[] = {
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x01,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ enable),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x02,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ usb_token),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x10,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ audio_format_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x10,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ audio_format),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x11,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ number_of_ch_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x11,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ number_of_ch),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x12,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ bit_rate_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x12,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ bit_rate),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x13,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ xfer_buff_size_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x13,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ xfer_buff_size),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x14,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ service_interval_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x14,
+ .offset = offsetof(struct qmi_uaudio_stream_req_msg_v01,
+ service_interval),
+ },
+ {
+ .data_type = QMI_EOTI,
+ .array_type = NO_ARRAY,
+ .tlv_type = QMI_COMMON_TLV_TYPE,
+ },
+};
+
+const struct qmi_elem_info qmi_uaudio_stream_resp_msg_v01_ei[] = {
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct qmi_response_type_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x02,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ resp),
+ .ei_array = qmi_response_type_v01_ei,
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x10,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ status_valid),
+ },
+ {
+ .data_type = QMI_SIGNED_4_BYTE_ENUM,
+ .elem_len = 1,
+ .elem_size = sizeof(enum usb_qmi_audio_stream_status_enum_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x10,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ status),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x11,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ internal_status_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x11,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ internal_status),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x12,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ slot_id_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x12,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ slot_id),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x13,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ usb_token_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x13,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ usb_token),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x14,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ std_as_opr_intf_desc_valid),
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct usb_interface_descriptor_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x14,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ std_as_opr_intf_desc),
+ .ei_array = usb_interface_descriptor_v01_ei,
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x15,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ std_as_data_ep_desc_valid),
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct usb_endpoint_descriptor_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x15,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ std_as_data_ep_desc),
+ .ei_array = usb_endpoint_descriptor_v01_ei,
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x16,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ std_as_sync_ep_desc_valid),
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct usb_endpoint_descriptor_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x16,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ std_as_sync_ep_desc),
+ .ei_array = usb_endpoint_descriptor_v01_ei,
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x17,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ usb_audio_spec_revision_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_2_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u16),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x17,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ usb_audio_spec_revision),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x18,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ data_path_delay_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x18,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ data_path_delay),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x19,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ usb_audio_subslot_size_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x19,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ usb_audio_subslot_size),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x1A,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ xhci_mem_info_valid),
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct apps_mem_info_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x1A,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ xhci_mem_info),
+ .ei_array = apps_mem_info_v01_ei,
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x1B,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ interrupter_num_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x1B,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ interrupter_num),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x1C,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ speed_info_valid),
+ },
+ {
+ .data_type = QMI_SIGNED_4_BYTE_ENUM,
+ .elem_len = 1,
+ .elem_size = sizeof(enum usb_qmi_audio_device_speed_enum_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x1C,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ speed_info),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x1D,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ controller_num_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x1D,
+ .offset = offsetof(
+ struct qmi_uaudio_stream_resp_msg_v01,
+ controller_num),
+ },
+ {
+ .data_type = QMI_EOTI,
+ .array_type = NO_ARRAY,
+ .tlv_type = QMI_COMMON_TLV_TYPE,
+ },
+};
+
+const struct qmi_elem_info qmi_uaudio_stream_ind_msg_v01_ei[] = {
+ {
+ .data_type = QMI_SIGNED_4_BYTE_ENUM,
+ .elem_len = 1,
+ .elem_size = sizeof(
+ enum usb_qmi_audio_device_indication_enum_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x01,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ dev_event),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x02,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ slot_id),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x10,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ usb_token_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_4_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u32),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x10,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ usb_token),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x11,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ std_as_opr_intf_desc_valid),
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct usb_interface_descriptor_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x11,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ std_as_opr_intf_desc),
+ .ei_array = usb_interface_descriptor_v01_ei,
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x12,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ std_as_data_ep_desc_valid),
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct usb_endpoint_descriptor_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x12,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ std_as_data_ep_desc),
+ .ei_array = usb_endpoint_descriptor_v01_ei,
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x13,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ std_as_sync_ep_desc_valid),
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct usb_endpoint_descriptor_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x13,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ std_as_sync_ep_desc),
+ .ei_array = usb_endpoint_descriptor_v01_ei,
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x14,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ usb_audio_spec_revision_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_2_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u16),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x14,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ usb_audio_spec_revision),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x15,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ data_path_delay_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x15,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ data_path_delay),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x16,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ usb_audio_subslot_size_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x16,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ usb_audio_subslot_size),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x17,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ xhci_mem_info_valid),
+ },
+ {
+ .data_type = QMI_STRUCT,
+ .elem_len = 1,
+ .elem_size = sizeof(struct apps_mem_info_v01),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x17,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ xhci_mem_info),
+ .ei_array = apps_mem_info_v01_ei,
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x18,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ interrupter_num_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x18,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ interrupter_num),
+ },
+ {
+ .data_type = QMI_OPT_FLAG,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x19,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ controller_num_valid),
+ },
+ {
+ .data_type = QMI_UNSIGNED_1_BYTE,
+ .elem_len = 1,
+ .elem_size = sizeof(u8),
+ .array_type = NO_ARRAY,
+ .tlv_type = 0x19,
+ .offset = offsetof(struct qmi_uaudio_stream_ind_msg_v01,
+ controller_num),
+ },
+ {
+ .data_type = QMI_EOTI,
+ .array_type = NO_ARRAY,
+ .tlv_type = QMI_COMMON_TLV_TYPE,
+ },
+};
diff --git a/sound/usb/qcom/usb_audio_qmi_v01.h b/sound/usb/qcom/usb_audio_qmi_v01.h
new file mode 100644
index 000000000000..6876c4d225a8
--- /dev/null
+++ b/sound/usb/qcom/usb_audio_qmi_v01.h
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef USB_QMI_V01_H
+#define USB_QMI_V01_H
+
+#define UAUDIO_STREAM_SERVICE_ID_V01 0x41D
+#define UAUDIO_STREAM_SERVICE_VERS_V01 0x01
+
+#define QMI_UAUDIO_STREAM_RESP_V01 0x0001
+#define QMI_UAUDIO_STREAM_REQ_V01 0x0001
+#define QMI_UAUDIO_STREAM_IND_V01 0x0001
+
+
+struct mem_info_v01 {
+ u64 va;
+ u64 pa;
+ u32 size;
+};
+
+struct apps_mem_info_v01 {
+ struct mem_info_v01 evt_ring;
+ struct mem_info_v01 tr_data;
+ struct mem_info_v01 tr_sync;
+ struct mem_info_v01 xfer_buff;
+ struct mem_info_v01 dcba;
+};
+
+struct usb_endpoint_descriptor_v01 {
+ u8 bLength;
+ u8 bDescriptorType;
+ u8 bEndpointAddress;
+ u8 bmAttributes;
+ u16 wMaxPacketSize;
+ u8 bInterval;
+ u8 bRefresh;
+ u8 bSynchAddress;
+};
+
+struct usb_interface_descriptor_v01 {
+ u8 bLength;
+ u8 bDescriptorType;
+ u8 bInterfaceNumber;
+ u8 bAlternateSetting;
+ u8 bNumEndpoints;
+ u8 bInterfaceClass;
+ u8 bInterfaceSubClass;
+ u8 bInterfaceProtocol;
+ u8 iInterface;
+};
+
+enum usb_qmi_audio_stream_status_enum_v01 {
+ USB_QMI_STREAM_STATUS_ENUM_MIN_VAL_V01 = INT_MIN,
+ USB_QMI_STREAM_REQ_SUCCESS_V01 = 0,
+ USB_QMI_STREAM_REQ_FAILURE_V01 = 1,
+ USB_QMI_STREAM_REQ_FAILURE_NOT_FOUND_V01 = 2,
+ USB_QMI_STREAM_REQ_FAILURE_INVALID_PARAM_V01 = 3,
+ USB_QMI_STREAM_REQ_FAILURE_MEMALLOC_V01 = 4,
+ USB_QMI_STREAM_STATUS_ENUM_MAX_VAL_V01 = INT_MAX,
+};
+
+enum usb_qmi_audio_device_indication_enum_v01 {
+ USB_QMI_DEVICE_INDICATION_ENUM_MIN_VAL_V01 = INT_MIN,
+ USB_QMI_DEV_CONNECT_V01 = 0,
+ USB_QMI_DEV_DISCONNECT_V01 = 1,
+ USB_QMI_DEV_SUSPEND_V01 = 2,
+ USB_QMI_DEV_RESUME_V01 = 3,
+ USB_QMI_DEVICE_INDICATION_ENUM_MAX_VAL_V01 = INT_MAX,
+};
+
+enum usb_qmi_audio_device_speed_enum_v01 {
+ USB_QMI_DEVICE_SPEED_ENUM_MIN_VAL_V01 = INT_MIN,
+ USB_QMI_DEVICE_SPEED_INVALID_V01 = 0,
+ USB_QMI_DEVICE_SPEED_LOW_V01 = 1,
+ USB_QMI_DEVICE_SPEED_FULL_V01 = 2,
+ USB_QMI_DEVICE_SPEED_HIGH_V01 = 3,
+ USB_QMI_DEVICE_SPEED_SUPER_V01 = 4,
+ USB_QMI_DEVICE_SPEED_SUPER_PLUS_V01 = 5,
+ USB_QMI_DEVICE_SPEED_ENUM_MAX_VAL_V01 = INT_MAX,
+};
+
+struct qmi_uaudio_stream_req_msg_v01 {
+ u8 enable;
+ u32 usb_token;
+ u8 audio_format_valid;
+ u32 audio_format;
+ u8 number_of_ch_valid;
+ u32 number_of_ch;
+ u8 bit_rate_valid;
+ u32 bit_rate;
+ u8 xfer_buff_size_valid;
+ u32 xfer_buff_size;
+ u8 service_interval_valid;
+ u32 service_interval;
+};
+#define QMI_UAUDIO_STREAM_REQ_MSG_V01_MAX_MSG_LEN 46
+extern const struct qmi_elem_info qmi_uaudio_stream_req_msg_v01_ei[];
+
+struct qmi_uaudio_stream_resp_msg_v01 {
+ struct qmi_response_type_v01 resp;
+ u8 status_valid;
+ enum usb_qmi_audio_stream_status_enum_v01 status;
+ u8 internal_status_valid;
+ u32 internal_status;
+ u8 slot_id_valid;
+ u32 slot_id;
+ u8 usb_token_valid;
+ u32 usb_token;
+ u8 std_as_opr_intf_desc_valid;
+ struct usb_interface_descriptor_v01 std_as_opr_intf_desc;
+ u8 std_as_data_ep_desc_valid;
+ struct usb_endpoint_descriptor_v01 std_as_data_ep_desc;
+ u8 std_as_sync_ep_desc_valid;
+ struct usb_endpoint_descriptor_v01 std_as_sync_ep_desc;
+ u8 usb_audio_spec_revision_valid;
+ u16 usb_audio_spec_revision;
+ u8 data_path_delay_valid;
+ u8 data_path_delay;
+ u8 usb_audio_subslot_size_valid;
+ u8 usb_audio_subslot_size;
+ u8 xhci_mem_info_valid;
+ struct apps_mem_info_v01 xhci_mem_info;
+ u8 interrupter_num_valid;
+ u8 interrupter_num;
+ u8 speed_info_valid;
+ enum usb_qmi_audio_device_speed_enum_v01 speed_info;
+ u8 controller_num_valid;
+ u8 controller_num;
+};
+#define QMI_UAUDIO_STREAM_RESP_MSG_V01_MAX_MSG_LEN 202
+extern const struct qmi_elem_info qmi_uaudio_stream_resp_msg_v01_ei[];
+
+struct qmi_uaudio_stream_ind_msg_v01 {
+ enum usb_qmi_audio_device_indication_enum_v01 dev_event;
+ u32 slot_id;
+ u8 usb_token_valid;
+ u32 usb_token;
+ u8 std_as_opr_intf_desc_valid;
+ struct usb_interface_descriptor_v01 std_as_opr_intf_desc;
+ u8 std_as_data_ep_desc_valid;
+ struct usb_endpoint_descriptor_v01 std_as_data_ep_desc;
+ u8 std_as_sync_ep_desc_valid;
+ struct usb_endpoint_descriptor_v01 std_as_sync_ep_desc;
+ u8 usb_audio_spec_revision_valid;
+ u16 usb_audio_spec_revision;
+ u8 data_path_delay_valid;
+ u8 data_path_delay;
+ u8 usb_audio_subslot_size_valid;
+ u8 usb_audio_subslot_size;
+ u8 xhci_mem_info_valid;
+ struct apps_mem_info_v01 xhci_mem_info;
+ u8 interrupter_num_valid;
+ u8 interrupter_num;
+ u8 controller_num_valid;
+ u8 controller_num;
+};
+#define QMI_UAUDIO_STREAM_IND_MSG_V01_MAX_MSG_LEN 181
+extern const struct qmi_elem_info qmi_uaudio_stream_ind_msg_v01_ei[];
+
+#endif
With USB audio offloading, an audio session is started from the ASoC
platform sound card and PCM devices. Likewise, the USB SND path is still
readily available for use, in case the non-offload path is desired. In
order to prevent the two entities from attempting to use the USB bus,
introduce a flag that determines when either paths are in use.
If a PCM device is already in use, the check will return an error to
userspace notifying that the stream is currently busy. This ensures that
only one path is using the USB substream.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/card.h | 1 +
sound/usb/pcm.c | 29 ++++++++++++++++++++++++++---
2 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/sound/usb/card.h b/sound/usb/card.h
index d66cc0b139af..3c900e5afbce 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -165,6 +165,7 @@ struct snd_usb_substream {
unsigned int pkt_offset_adj; /* Bytes to drop from beginning of packets (for non-compliant devices) */
unsigned int stream_offset_adj; /* Bytes to drop from beginning of stream (for non-compliant devices) */
+ unsigned int opened:1; /* pcm device opened */
unsigned int running: 1; /* running status */
unsigned int period_elapsed_pending; /* delay period handling */
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 3adb09ce1702..3e6d33de6ce6 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1241,8 +1241,17 @@ static int snd_usb_pcm_open(struct snd_pcm_substream *substream)
struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_usb_substream *subs = &as->substream[direction];
+ struct snd_usb_audio *chip = subs->stream->chip;
int ret;
+ mutex_lock(&chip->mutex);
+ if (subs->opened) {
+ mutex_unlock(&chip->mutex);
+ return -EBUSY;
+ }
+ subs->opened = 1;
+ mutex_unlock(&chip->mutex);
+
runtime->hw = snd_usb_hardware;
/* need an explicit sync to catch applptr update in low-latency mode */
if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
@@ -1259,13 +1268,23 @@ static int snd_usb_pcm_open(struct snd_pcm_substream *substream)
ret = setup_hw_info(runtime, subs);
if (ret < 0)
- return ret;
+ goto err_open;
ret = snd_usb_autoresume(subs->stream->chip);
if (ret < 0)
- return ret;
+ goto err_open;
ret = snd_media_stream_init(subs, as->pcm, direction);
if (ret < 0)
- snd_usb_autosuspend(subs->stream->chip);
+ goto err_resume;
+
+ return 0;
+
+err_resume:
+ snd_usb_autosuspend(subs->stream->chip);
+err_open:
+ mutex_lock(&chip->mutex);
+ subs->opened = 0;
+ mutex_unlock(&chip->mutex);
+
return ret;
}
@@ -1274,6 +1293,7 @@ static int snd_usb_pcm_close(struct snd_pcm_substream *substream)
int direction = substream->stream;
struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
struct snd_usb_substream *subs = &as->substream[direction];
+ struct snd_usb_audio *chip = subs->stream->chip;
int ret;
snd_media_stop_pipeline(subs);
@@ -1287,6 +1307,9 @@ static int snd_usb_pcm_close(struct snd_pcm_substream *substream)
subs->pcm_substream = NULL;
snd_usb_autosuspend(subs->stream->chip);
+ mutex_lock(&chip->mutex);
+ subs->opened = 0;
+ mutex_unlock(&chip->mutex);
return 0;
}
Utilize the card and PCM index coming from the USB QMI stream request.
This field follows what is set by the ASoC USB backend, and could
potentially carry information about a specific device selected through the
ASoC USB backend. The backend also has information about the last USB
sound device plugged in, so it can choose to select the last device plugged
in, accordingly.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/qcom/qc_audio_offload.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index 9695bf0ac1cd..5e7da9a033e5 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -107,8 +107,6 @@ struct uaudio_qmi_dev {
bool er_mapped;
/* reference count to number of possible consumers */
atomic_t qdev_in_use;
- /* idx to last udev card number plugged in */
- unsigned int last_card_num;
};
struct uaudio_dev {
@@ -1256,7 +1254,7 @@ static int prepare_qmi_response(struct snd_usb_substream *subs,
pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
xfer_buf_len = req_msg->xfer_buff_size;
- card_num = uaudio_qdev->last_card_num;
+ card_num = (req_msg->usb_token & QMI_STREAM_REQ_CARD_NUM_MASK) >> 16;
if (!uadev[card_num].ctrl_intf) {
dev_err(&subs->dev->dev, "audio ctrl intf info not cached\n");
@@ -1449,8 +1447,7 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
direction = (req_msg->usb_token & QMI_STREAM_REQ_DIRECTION);
pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
- pcm_card_num = req_msg->enable ? uaudio_qdev->last_card_num :
- ffs(uaudio_qdev->card_slot) - 1;
+ pcm_card_num = (req_msg->usb_token & QMI_STREAM_REQ_CARD_NUM_MASK) >> 16;
if (pcm_card_num >= SNDRV_CARDS) {
ret = -EINVAL;
goto response;
@@ -1658,7 +1655,6 @@ static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
sdev->num_capture = usb_qmi_get_pcm_num(chip, 1);
uadev[chip->card->number].sdev = sdev;
- uaudio_qdev->last_card_num = chip->card->number;
snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
snd_usb_offload_create_ctl(chip);
For USB sound to expose mixer controls to fetch information about the ASoC
sound card, add an API that returns the platform sound card number that is
registered with SOC USB. Knowing this allows for applications to further
query about the offload status.
Signed-off-by: Wesley Cheng <[email protected]>
---
include/sound/soc-usb.h | 6 ++++++
sound/soc/soc-usb.c | 26 ++++++++++++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/include/sound/soc-usb.h b/include/sound/soc-usb.h
index 3137f538270f..56df503c4ecf 100644
--- a/include/sound/soc-usb.h
+++ b/include/sound/soc-usb.h
@@ -85,6 +85,7 @@ int snd_soc_usb_find_format(int card_idx, struct snd_pcm_hw_params *params,
int snd_soc_usb_connect(struct device *usbdev, struct snd_soc_usb_device *sdev);
int snd_soc_usb_disconnect(struct device *usbdev, struct snd_soc_usb_device *sdev);
void *snd_soc_usb_find_priv_data(struct device *dev);
+int snd_soc_usb_device_offload_available(struct device *dev);
int snd_soc_usb_prepare_session(struct snd_soc_usb *usb, int card_idx, int pcm_idx);
int snd_soc_usb_shutdown_session(struct snd_soc_usb *usb, int session_id);
@@ -128,6 +129,11 @@ static inline void *snd_soc_usb_find_priv_data(struct device *dev)
return NULL;
}
+static inline int snd_soc_usb_device_offload_available(struct device *dev)
+{
+ return -ENODEV;
+}
+
static inline int snd_soc_usb_prepare_session(struct snd_soc_usb *usb, int card_idx,
int pcm_idx)
{
diff --git a/sound/soc/soc-usb.c b/sound/soc/soc-usb.c
index 27c76a33da32..53c4e399909e 100644
--- a/sound/soc/soc-usb.c
+++ b/sound/soc/soc-usb.c
@@ -457,6 +457,32 @@ int snd_soc_usb_find_format(int card_idx, struct snd_pcm_hw_params *params,
}
EXPORT_SYMBOL_GPL(snd_soc_usb_find_format);
+/**
+ * snd_soc_usb_device_offload_available() - Fetch BE DAI link sound card
+ * @dev: the device to find in SOC USB
+ *
+ * Finds the component linked to a specific SOC USB instance, and returns
+ * the sound card number for the platform card supporting offloading.
+ *
+ */
+int snd_soc_usb_device_offload_available(struct device *dev)
+{
+ struct snd_soc_usb *ctx;
+ struct device_node *node;
+
+ node = snd_soc_find_phandle(dev);
+ if (IS_ERR(node))
+ return -ENODEV;
+
+ ctx = snd_soc_find_usb_ctx(node);
+ of_node_put(node);
+ if (!ctx)
+ return -ENODEV;
+
+ return ctx->component->card->snd_card->number;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_device_offload_available);
+
/**
* snd_soc_usb_allocate_port() - allocate a SOC USB device
* @component: USB DPCM backend DAI component
In case of notifying SND platform drivers of connection events, some of
these use cases, such as offloading, require an ASoC USB backend device to
be initialized before the events can be handled. If the USB backend device
has not yet been probed, this leads to missing initial USB audio device
connection events.
Expose an API that traverses the usb_chip array for connected devices, and
to call the respective connection callback registered to the SND platform
driver.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/card.c | 21 +++++++++++++++++++++
sound/usb/card.h | 1 +
sound/usb/qcom/qc_audio_offload.c | 2 ++
3 files changed, 24 insertions(+)
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 1ad99a462038..8364c5b8fbbf 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -186,6 +186,27 @@ struct snd_usb_stream *snd_usb_find_suppported_substream(int card_idx,
}
EXPORT_SYMBOL_GPL(snd_usb_find_suppported_substream);
+/*
+ * in case the platform driver was not ready at the time of USB SND
+ * device connect, expose an API to discover all connected USB devices
+ * so it can populate any dependent resources/structures.
+ */
+void snd_usb_rediscover_devices(void)
+{
+ int i;
+
+ guard(mutex)(®ister_mutex);
+
+ if (!platform_ops || !platform_ops->connect_cb)
+ return;
+
+ for (i = 0; i < SNDRV_CARDS; i++) {
+ if (usb_chip[i])
+ platform_ops->connect_cb(usb_chip[i]);
+ }
+}
+EXPORT_SYMBOL_GPL(snd_usb_rediscover_devices);
+
/*
* disconnect streams
* called from usb_audio_disconnect()
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 3c900e5afbce..140928dd9d63 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -221,4 +221,5 @@ int snd_usb_unregister_platform_ops(void);
struct snd_usb_stream *snd_usb_find_suppported_substream(int card_idx,
struct snd_pcm_hw_params *params, int direction);
+void snd_usb_rediscover_devices(void);
#endif /* __USBAUDIO_CARD_H */
diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index 6a25a390f8ae..9695bf0ac1cd 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -1879,6 +1879,8 @@ static int __init qc_usb_audio_offload_init(void)
if (ret < 0)
goto release_qmi;
+ snd_usb_rediscover_devices();
+
return 0;
release_qmi:
For userspace to know about certain capabilities of the current platform
card, add tags to the components string that it can use to enable support
for that audio path. In case of USB offloading, the "usboffldplybk: 1" tag
is added to the string.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/soc/qcom/sm8250.c | 3 +++
sound/soc/qcom/usb_offload_utils.c | 22 ++++++++++++++++++++++
sound/soc/qcom/usb_offload_utils.h | 6 ++++++
3 files changed, 31 insertions(+)
diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index a4e87dfb1b93..5e3007e2e061 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -39,6 +39,9 @@ static int sm8250_snd_init(struct snd_soc_pcm_runtime *rtd)
&data->usb_offload_jack_setup);
else
ret = qcom_snd_wcd_jack_setup(rtd, &data->jack, &data->jack_setup);
+
+ qcom_snd_add_components_string(rtd);
+
return ret;
}
diff --git a/sound/soc/qcom/usb_offload_utils.c b/sound/soc/qcom/usb_offload_utils.c
index 0be05c1f87a9..8b137e1593e5 100644
--- a/sound/soc/qcom/usb_offload_utils.c
+++ b/sound/soc/qcom/usb_offload_utils.c
@@ -26,4 +26,26 @@ int qcom_snd_usb_offload_jack_setup(struct snd_soc_pcm_runtime *rtd,
return 0;
}
EXPORT_SYMBOL_GPL(qcom_snd_usb_offload_jack_setup);
+
+int qcom_snd_add_components_string(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+ struct snd_soc_card *card = rtd->card;
+ const char *prev = card->components;
+
+ switch (cpu_dai->id) {
+ case USB_RX:
+ card->components = devm_kasprintf(card->dev, GFP_KERNEL, "%s %s",
+ card->components,
+ snd_soc_usb_get_components_tag(true));
+ default:
+ break;
+ }
+
+ if (prev && prev != card->components)
+ devm_kfree(card->dev, prev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_snd_add_components_string);
MODULE_LICENSE("GPL");
diff --git a/sound/soc/qcom/usb_offload_utils.h b/sound/soc/qcom/usb_offload_utils.h
index 283e81f57f43..03780a12a326 100644
--- a/sound/soc/qcom/usb_offload_utils.h
+++ b/sound/soc/qcom/usb_offload_utils.h
@@ -10,11 +10,17 @@
#if IS_ENABLED(CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS)
int qcom_snd_usb_offload_jack_setup(struct snd_soc_pcm_runtime *rtd,
struct snd_soc_jack *jack, bool *jack_setup);
+int qcom_snd_add_components_string(struct snd_soc_pcm_runtime *rtd);
#else
static inline int qcom_snd_usb_offload_jack_setup(struct snd_soc_pcm_runtime *rtd,
struct snd_soc_jack *jack, bool *jack_setup)
{
return -ENODEV;
}
+
+static inline int qcom_snd_add_components_string(struct snd_soc_pcm_runtime *rtd)
+{
+ return -ENODEV;
+}
#endif /* IS_ENABLED(CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS) */
#endif /* __QCOM_SND_USB_OFFLOAD_UTILS_H__ */
Some vendor modules will utilize useful parsing and endpoint management
APIs to start audio playback/capture.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/card.c | 4 +++
sound/usb/endpoint.c | 1 +
sound/usb/helper.c | 1 +
sound/usb/pcm.c | 75 +++++++++++++++++++++++++++++++-------------
sound/usb/pcm.h | 11 +++++++
5 files changed, 71 insertions(+), 21 deletions(-)
diff --git a/sound/usb/card.c b/sound/usb/card.c
index ca4f3bc1b42d..7dc8007ba839 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -1061,6 +1061,7 @@ int snd_usb_lock_shutdown(struct snd_usb_audio *chip)
wake_up(&chip->shutdown_wait);
return err;
}
+EXPORT_SYMBOL_GPL(snd_usb_lock_shutdown);
/* autosuspend and unlock the shutdown */
void snd_usb_unlock_shutdown(struct snd_usb_audio *chip)
@@ -1069,6 +1070,7 @@ void snd_usb_unlock_shutdown(struct snd_usb_audio *chip)
if (atomic_dec_and_test(&chip->usage_count))
wake_up(&chip->shutdown_wait);
}
+EXPORT_SYMBOL_GPL(snd_usb_unlock_shutdown);
int snd_usb_autoresume(struct snd_usb_audio *chip)
{
@@ -1091,6 +1093,7 @@ int snd_usb_autoresume(struct snd_usb_audio *chip)
}
return 0;
}
+EXPORT_SYMBOL_GPL(snd_usb_autoresume);
void snd_usb_autosuspend(struct snd_usb_audio *chip)
{
@@ -1104,6 +1107,7 @@ void snd_usb_autosuspend(struct snd_usb_audio *chip)
for (i = 0; i < chip->num_interfaces; i++)
usb_autopm_put_interface(chip->intf[i]);
}
+EXPORT_SYMBOL_GPL(snd_usb_autosuspend);
static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
{
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 8f65349a06d3..9876abb80853 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -1513,6 +1513,7 @@ int snd_usb_endpoint_prepare(struct snd_usb_audio *chip,
mutex_unlock(&chip->mutex);
return err;
}
+EXPORT_SYMBOL_GPL(snd_usb_endpoint_prepare);
/* get the current rate set to the given clock by any endpoint */
int snd_usb_endpoint_get_clock_rate(struct snd_usb_audio *chip, int clock)
diff --git a/sound/usb/helper.c b/sound/usb/helper.c
index bf80e55d013a..4322ae3738e6 100644
--- a/sound/usb/helper.c
+++ b/sound/usb/helper.c
@@ -62,6 +62,7 @@ void *snd_usb_find_csint_desc(void *buffer, int buflen, void *after, u8 dsubtype
}
return NULL;
}
+EXPORT_SYMBOL_GPL(snd_usb_find_csint_desc);
/*
* Wrapper for usb_control_msg().
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 08bf535ed163..3adb09ce1702 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -148,6 +148,16 @@ find_format(struct list_head *fmt_list_head, snd_pcm_format_t format,
return found;
}
+const struct audioformat *
+snd_usb_find_format(struct list_head *fmt_list_head, snd_pcm_format_t format,
+ unsigned int rate, unsigned int channels, bool strict_match,
+ struct snd_usb_substream *subs)
+{
+ return find_format(fmt_list_head, format, rate, channels, strict_match,
+ subs);
+}
+EXPORT_SYMBOL_GPL(snd_usb_find_format);
+
static const struct audioformat *
find_substream_format(struct snd_usb_substream *subs,
const struct snd_pcm_hw_params *params)
@@ -157,6 +167,14 @@ find_substream_format(struct snd_usb_substream *subs,
true, subs);
}
+const struct audioformat *
+snd_usb_find_substream_format(struct snd_usb_substream *subs,
+ const struct snd_pcm_hw_params *params)
+{
+ return find_substream_format(subs, params);
+}
+EXPORT_SYMBOL_GPL(snd_usb_find_substream_format);
+
bool snd_usb_pcm_has_fixed_rate(struct snd_usb_substream *subs)
{
const struct audioformat *fp;
@@ -461,20 +479,9 @@ static void close_endpoints(struct snd_usb_audio *chip,
}
}
-/*
- * hw_params callback
- *
- * allocate a buffer and set the given audio format.
- *
- * so far we use a physically linear buffer although packetize transfer
- * doesn't need a continuous area.
- * if sg buffer is supported on the later version of alsa, we'll follow
- * that.
- */
-static int snd_usb_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
+int snd_usb_hw_params(struct snd_usb_substream *subs,
+ struct snd_pcm_hw_params *hw_params)
{
- struct snd_usb_substream *subs = substream->runtime->private_data;
struct snd_usb_audio *chip = subs->stream->chip;
const struct audioformat *fmt;
const struct audioformat *sync_fmt;
@@ -499,7 +506,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
if (fmt->implicit_fb) {
sync_fmt = snd_usb_find_implicit_fb_sync_format(chip, fmt,
hw_params,
- !substream->stream,
+ !subs->direction,
&sync_fixed_rate);
if (!sync_fmt) {
usb_audio_dbg(chip,
@@ -579,15 +586,28 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
return ret;
}
+EXPORT_SYMBOL_GPL(snd_usb_hw_params);
/*
- * hw_free callback
+ * hw_params callback
*
- * reset the audio format and release the buffer
+ * allocate a buffer and set the given audio format.
+ *
+ * so far we use a physically linear buffer although packetize transfer
+ * doesn't need a continuous area.
+ * if sg buffer is supported on the later version of alsa, we'll follow
+ * that.
*/
-static int snd_usb_hw_free(struct snd_pcm_substream *substream)
+static int snd_usb_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *hw_params)
{
struct snd_usb_substream *subs = substream->runtime->private_data;
+
+ return snd_usb_hw_params(subs, hw_params);
+}
+
+int snd_usb_hw_free(struct snd_usb_substream *subs)
+{
struct snd_usb_audio *chip = subs->stream->chip;
snd_media_stop_pipeline(subs);
@@ -603,6 +623,19 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream)
return 0;
}
+EXPORT_SYMBOL_GPL(snd_usb_hw_free);
+
+/*
+ * hw_free callback
+ *
+ * reset the audio format and release the buffer
+ */
+static int snd_usb_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_usb_substream *subs = substream->runtime->private_data;
+
+ return snd_usb_hw_free(subs);
+}
/* free-wheeling mode? (e.g. dmix) */
static int in_free_wheeling_mode(struct snd_pcm_runtime *runtime)
@@ -1746,8 +1779,8 @@ static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream
static const struct snd_pcm_ops snd_usb_playback_ops = {
.open = snd_usb_pcm_open,
.close = snd_usb_pcm_close,
- .hw_params = snd_usb_hw_params,
- .hw_free = snd_usb_hw_free,
+ .hw_params = snd_usb_pcm_hw_params,
+ .hw_free = snd_usb_pcm_hw_free,
.prepare = snd_usb_pcm_prepare,
.trigger = snd_usb_substream_playback_trigger,
.sync_stop = snd_usb_pcm_sync_stop,
@@ -1758,8 +1791,8 @@ static const struct snd_pcm_ops snd_usb_playback_ops = {
static const struct snd_pcm_ops snd_usb_capture_ops = {
.open = snd_usb_pcm_open,
.close = snd_usb_pcm_close,
- .hw_params = snd_usb_hw_params,
- .hw_free = snd_usb_hw_free,
+ .hw_params = snd_usb_pcm_hw_params,
+ .hw_free = snd_usb_pcm_hw_free,
.prepare = snd_usb_pcm_prepare,
.trigger = snd_usb_substream_capture_trigger,
.sync_stop = snd_usb_pcm_sync_stop,
diff --git a/sound/usb/pcm.h b/sound/usb/pcm.h
index 388fe2ba346d..be2dd9478982 100644
--- a/sound/usb/pcm.h
+++ b/sound/usb/pcm.h
@@ -15,4 +15,15 @@ void snd_usb_preallocate_buffer(struct snd_usb_substream *subs);
int snd_usb_audioformat_set_sync_ep(struct snd_usb_audio *chip,
struct audioformat *fmt);
+const struct audioformat *
+snd_usb_find_format(struct list_head *fmt_list_head, snd_pcm_format_t format,
+ unsigned int rate, unsigned int channels, bool strict_match,
+ struct snd_usb_substream *subs);
+const struct audioformat *
+snd_usb_find_substream_format(struct snd_usb_substream *subs,
+ const struct snd_pcm_hw_params *params);
+
+int snd_usb_hw_params(struct snd_usb_substream *subs,
+ struct snd_pcm_hw_params *hw_params);
+int snd_usb_hw_free(struct snd_usb_substream *subs);
#endif /* __USBAUDIO_PCM_H */
With the introduction of the soc-usb driver, add documentation highlighting
details on how to utilize the new driver and how it interacts with
different components in USB SND and ASoC. It provides examples on how to
implement the drivers that will need to be introduced in order to enable
USB audio offloading.
Signed-off-by: Wesley Cheng <[email protected]>
---
Documentation/sound/soc/index.rst | 1 +
Documentation/sound/soc/usb.rst | 611 ++++++++++++++++++++++++++++++
2 files changed, 612 insertions(+)
create mode 100644 Documentation/sound/soc/usb.rst
diff --git a/Documentation/sound/soc/index.rst b/Documentation/sound/soc/index.rst
index e57df2dab2fd..8bed8f8f48da 100644
--- a/Documentation/sound/soc/index.rst
+++ b/Documentation/sound/soc/index.rst
@@ -18,3 +18,4 @@ The documentation is spilt into the following sections:-
jack
dpcm
codec-to-codec
+ usb
diff --git a/Documentation/sound/soc/usb.rst b/Documentation/sound/soc/usb.rst
new file mode 100644
index 000000000000..7b649592e2fd
--- /dev/null
+++ b/Documentation/sound/soc/usb.rst
@@ -0,0 +1,611 @@
+================
+ASoC USB support
+================
+
+Overview
+========
+In order to leverage the existing USB sound device support in ALSA, the
+introduction of the ASoC USB APIs, allow for the entities to communicate
+with one another.
+
+One potential use case would be to support USB audio offloading, which is
+an implementation that allows for an external DSP on the SoC to handle the
+transfer of audio data over the USB bus. This would let the main
+processor to stay in lower power modes for longer durations. The following
+is an example design of how the ASoC and ALSA pieces can be connected
+together to achieve this:
+
+::
+
+ USB | ASoC
+ | _________________________
+ | | ASoC Platform card |
+ | |_________________________|
+ | | |
+ | ___V____ ____V____
+ | |ASoC BE | |ASoC FE |
+ | |DAI LNK | |DAI LNK |
+ | |________| |_________|
+ | ^ ^ ^
+ | | |________|
+ | ___V____ |
+ | |SOC-USB | |
+ ________ ________ | | |
+ |USB SND |<--->|USBSND |<------------>|________| |
+ |(card.c)| |offld |<---------- |
+ |________| |________|___ | | |
+ ^ ^ | | | ____________V_________
+ | | | | | |IPC |
+ __ V_______________V_____ | | | |______________________|
+ |USB SND (endpoint.c) | | | | ^
+ |_________________________| | | | |
+ ^ | | | ___________V___________
+ | | | |->|audio DSP |
+ ___________V_____________ | | |_______________________|
+ |XHCI HCD |<- |
+ |_________________________| |
+
+
+SOC USB driver
+==============
+Structures
+----------
+``struct snd_soc_usb``
+
+ - ``list``: list head for SND SOC struct list
+ - ``dev``: USB backend device reference
+ - ``component``: reference to ASoC component
+ - ``active_list``: active sessions
+ - ``num_supported_streams``: number of supported concurrent sessions
+ - ``connection_status_cb``: callback to notify connection events
+ - ``put_offload_dev``: callback to select USB sound card/PCM device
+ - ``get_offload_dev``: callback to fetch selected USB sound card/PCM device
+ - ``priv_data``: driver data
+
+The snd_soc_usb structure can be referenced using the ASoC platform card
+device, or a USB device (udev->dev). This is created by the ASoC BE DAI
+link, and the USB sound entity will be able to pass information to the
+ASoC BE DAI link using this structure.
+
+``struct snd_soc_usb_device``
+
+ - ``card_idx``: sound card index associated with USB device
+ - ``chip_idx``: USB sound chip array index
+ - ``num_playback``: number of playback streams
+ - ``num_capture``: number of capture streams
+
+The struct snd_soc_usb_device is created by the USB sound offload driver.
+This will carry basic parameters/limitations that will be used to
+determine the possible offloading paths for this USB audio device.
+
+``struct snd_soc_usb_session``
+
+ - ``active_card_idx``: active offloaded sound card
+ - ``active_pcm_idx``: active offloaded PCM device
+ - ``state``: USB BE DAI link PCM state
+
+The struct snd_soc_usb_session tracks the current offloading state for a
+particular card and PCM combination. This structure is carried/saved as
+part of the active_list within struct snd_soc_usb.
+
+The number of entities in the active list corresponds to the number of
+snd_soc_usb_session structures that are allocated. This is controlled
+by the num_supported_streams that is reported as part of the SOC USB
+structure creation.
+
+Functions
+---------
+.. code-block:: rst
+
+ const char *snd_soc_usb_get_components_tag(bool playback);
+..
+
+ - ``playback``: direction of audio stream
+
+**snd_soc_usb_get_components_tag()** returns the tag used for describing if USB
+offloading is supported for appending to the ASoC platform card's components
+string.
+
+Returns a tag based on the direction of the audio stream.
+
+.. code-block:: rst
+
+ int snd_soc_usb_find_format(int card_idx, struct snd_pcm_hw_params *params,
+ int direction)
+..
+
+ - ``card_idx``: the index into the USB sound chip array.
+ - ``params``: Requested PCM parameters from the USB DPCM BE DAI link
+ - ``direction``: capture or playback
+
+**snd_soc_usb_find_format()** ensures that the requested audio profile being
+requested by the external DSP is supported by the USB device.
+
+Returns 0 on success, and -EOPNOTSUPP on failure.
+
+.. code-block:: rst
+
+ int snd_soc_usb_connect(struct device *usbdev, struct snd_soc_usb_device *sdev)
+..
+
+ - ``usbdev``: the usb device that was discovered
+ - ``sdev``: capabilities of the device
+
+**snd_soc_usb_connect()** notifies the ASoC USB DCPM BE DAI link of a USB
+audio device detection. This can be utilized in the BE DAI
+driver to keep track of available USB audio devices. This is intended
+to be called by the USB offload driver residing in USB SND.
+
+Returns 0 on success, negative error code on failure.
+
+.. code-block:: rst
+
+ int snd_soc_usb_disconnect(struct device *usbdev, struct snd_soc_usb_device *sdev)
+..
+
+ - ``usbdev``: the usb device that was removed
+ - ``sdev``: capabilities to free
+
+**snd_soc_usb_disconnect()** notifies the ASoC USB DCPM BE DAI link of a USB
+audio device removal. This is intended to be called by the USB offload
+driver that resides in USB SND.
+
+.. code-block:: rst
+
+ void *snd_soc_usb_find_priv_data(struct device *usbdev)
+..
+
+ - ``usbdev``: the usb device to reference to find private data
+
+**snd_soc_usb_find_priv_data()** fetches the private data saved to the SOC USB
+device.
+
+Returns pointer to priv_data on success, NULL on failure.
+
+.. code-block:: rst
+
+ int snd_soc_usb_device_offload_available(struct device *dev)
+..
+
+ - ``dev``: the device to find in SOC USB
+
+**snd_soc_usb_device_offload_available()** fetch the sound card number associated
+to the USB BE DAI link.
+
+Returns a valid sound card index on success, negative on failure.
+
+.. code-block:: rst
+
+ int snd_soc_usb_prepare_session(struct snd_soc_usb *usb, int card_idx, int pcm_idx);
+..
+
+ - ``usb``: SOC USB device
+ - ``card_idx``: USB sound card index
+ - ``pcm_idx``: USB PCM device index
+
+**snd_soc_usb_prepare_session()** populates active_list with a 'struct
+snd_soc_usb_session.' This will move the session into the SND_SOC_USB_PREPARED
+state. State updates will always start here.
+
+Returns index to active_list on success, -EBUSY on failure.
+
+.. code-block:: rst
+
+ int snd_soc_usb_shutdown_session(struct snd_soc_usb *usb, int session_id);
+..
+
+ - ``usb``: SOC USB device
+ - ``session_id``: session id returned by **snd_soc_usb_prepare_session()**
+
+**snd_soc_usb_shutdown_session()** frees up a slot in active_list, which signals
+that there is no longer an active offloading device. This allows for another
+session to be started.
+
+Returns 0 on success, -EINVAL if session index is invalid.
+
+.. code-block:: rst
+
+ int snd_soc_usb_set_session_state(struct snd_soc_usb *usb, int session_id,
+ enum snd_soc_usb_dai_state state);
+..
+
+ - ``usb``: SOC USB device
+ - ``session_id``: session id returned by **snd_soc_usb_prepare_session()**
+ - ``state``: state to move into
+
+**snd_soc_usb_set_session_state()** moves an offloading session to the desired
+state.
+
+.. code-block:: rst
+
+ int snd_soc_usb_setup_offload_jack(struct snd_soc_component *component,
+ struct snd_soc_jack *jack)
+..
+
+ - ``component``: ASoC component to add the jack
+ - ``jack``: ASoC sound jack to add
+
+**snd_soc_usb_setup_offload_jack()** is a helper to add a sound jack control to
+the platform sound card. This will allow for consistent naming to be used on
+designs that support USB audio offloading.
+
+Returns 0 on success, negative otherwise.
+
+.. code-block:: rst
+
+ struct snd_soc_usb *snd_soc_usb_allocate_port(struct snd_soc_component *component,
+ int num_supported_streams, void *data);
+..
+
+ - ``component``: DPCM BE DAI link component
+ - ``num_supported_streams``: number of active streams supported by external DSP
+ - ``data``: private data
+
+**snd_soc_usb_allocate_port()** allocates a SOC USB device and populates standard
+parameters that is used for further operations.
+
+Returns a pointer to struct soc_usb on success, negative on error.
+
+.. code-block:: rst
+
+ void snd_soc_usb_free_port(struct snd_soc_usb *usb);
+..
+
+ - ``usb``: SOC USB device to free
+
+**snd_soc_usb_free_port()** frees a SOC USB device.
+
+.. code-block:: rst
+
+ int snd_soc_usb_add_port(struct snd_soc_usb *usb);
+..
+
+ - ``usb``: SOC USB device to add
+
+**snd_soc_usb_add_port()** add an allocated SOC USB device to the SOC USB framework.
+Once added, this device can be referenced by further operations.
+
+.. code-block:: rst
+
+ int snd_soc_usb_remove_port(struct snd_soc_usb *usb);
+..
+
+ - ``usb``: SOC USB device to remove
+
+**snd_soc_usb_remove_port()** removes a SOC USB device from the SOC USB framework.
+After removing a device, any SOC USB operations would not be able to reference the
+device removed.
+
+How to Register to SOC USB
+--------------------------
+The ASoC DPCM USB BE DAI link is the entity responsible for allocating and
+registering the SOC USB device on the component bind. Likewise, it will
+also be responsible for freeing the allocated resources. An example can
+be shown below:
+
+.. code-block:: rst
+
+ static int q6usb_component_probe(struct snd_soc_component *component)
+ {
+ ...
+ data->usb = snd_soc_usb_allocate_port(component, 1, &data->priv);
+ if (!data->usb)
+ return -ENOMEM;
+
+ usb->connection_status_cb = q6usb_alsa_connection_cb;
+
+ ret = snd_soc_usb_add_port(usb);
+ if (ret < 0) {
+ dev_err(component->dev, "failed to add usb port\n");
+ goto free_usb;
+ }
+ ...
+ }
+
+ static void q6usb_component_remove(struct snd_soc_component *component)
+ {
+ ...
+ snd_soc_usb_remove_port(data->usb);
+ snd_soc_usb_free_port(data->usb);
+ }
+
+ static const struct snd_soc_component_driver q6usb_dai_component = {
+ .probe = q6usb_component_probe,
+ .remove = q6usb_component_remove,
+ .name = "q6usb-dai-component",
+ ...
+ };
+..
+
+BE DAI links can pass along vendor specific information as part of the
+call to allocate the SOC USB device. This will allow any BE DAI link
+parameters or settings to be accessed by the USB offload driver that
+resides in USB SND.
+
+USB Audio Device Connection Flow
+--------------------------------
+USB devices can be hotplugged into the USB root hub at any point in time.
+The BE DAI link should be aware of the current state of the physical USB
+port, i.e. if there are any USB devices with audio interface(s) connected.
+The following callback can be used to notify the BE DAI link of any change:
+
+ **connection_status_cb()**
+
+This is called whenever there is a USB SND interface bind or remove event,
+using snd_soc_usb_connect() or snd_soc_usb_disconnect():
+
+.. code-block:: rst
+
+ static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
+ {
+ ...
+ snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
+ ...
+ }
+
+ static void qc_usb_audio_offload_disconnect(struct snd_usb_audio *chip)
+ {
+ ...
+ snd_soc_usb_disconnect(usb_get_usb_backend(chip->dev), dev->sdev);
+ ...
+ }
+..
+
+In order to account for conditions where driver or device existence is
+not guaranteed, USB SND exposes snd_usb_rediscover_devices() to resend the
+connect events for any identified USB audio interfaces. Consider the
+the following situtation:
+
+ **usb_audio_probe()**
+ | --> USB audio streams allocated and saved to usb_chip[]
+ | --> Propagate connect event to USB offload driver in USB SND
+ | --> **snd_soc_usb_connect()** exits as USB BE DAI link is not ready
+
+ BE DAI link component probe
+ | --> DAI link is probed and SOC USB port is allocated
+ | --> The USB audio device connect event is missed
+
+To ensure connection events are not missed, **snd_usb_rediscover_devices()**
+is executed when the SOC USB device is registered. Now, when the BE DAI
+link component probe occurs, the following highlights the sequence:
+
+ BE DAI link component probe
+ | --> DAI link is probed and SOC USB port is allocated
+ | --> SOC USB device added, and **snd_usb_rediscover_devices()** runs
+
+ **snd_usb_rediscover_devices()**
+ | --> Traverses through usb_chip[] and for non-NULL entries issue
+ | **connection_status_cb()**
+
+In the case where the USB offload driver is unbounded, while USB SND is
+ready, the **snd_usb_rediscover_devices()** is called during module init.
+This allows for the offloading path to also be enabled with the following
+flow:
+
+ **usb_audio_probe()**
+ | --> USB audio streams allocated and saved to usb_chip[]
+ | --> Propagate connect event to USB offload driver in USB SND
+ | --> USB offload driver **NOT** ready!
+
+ BE DAI link component probe
+ | --> DAI link is probed and SOC USB port is allocated
+ | --> No USB connect event due to missing USB offload driver
+
+ USB offload driver probe
+ | --> **qc_usb_audio_offload_init()**
+ | --> Calls **snd_usb_rediscover_devices()** to notify of devices
+
+Advertising USB Audio Offload Capability
+----------------------------------------
+As the USB audio offloading can potentially reside within the platform ASoC based
+sound card, depending on if there is a USB DPCM backend DAI link existing in the
+platform card definition, then users can utilize the sound card's components string,
+in order to signal that USB offloading is supported by this sound card.
+
+The sound core exposes:
+
+ **snd_ctl_card_info()**
+
+This allows for userspace applications, i.e. amixer, to fetch the components string
+that was created as part of the ASoC platform sound card creation routine. The
+possible tags that can be seen are:
+
+ - **usbplybkoffld: 1**
+ - **usbcapoffld: 1**
+
+**usbplybkoffld** translates to usb offload playback supported, and **usbcapoffld**
+translates to USB offload capture supported. Applications can then query the sound
+card for further offload status parameters.
+
+SOC USB and USB Sound Kcontrols
+===============================
+Details
+-------
+SOC USB and USB sound expose a set of SND kcontrols for applications to select
+and fetch the current offloading status for the ASoC platform sound card. Kcontrols
+are split between two layers:
+
+ - USB sound - Notifies the sound card number for the ASoC platform sound
+ card that it is registered to for supporting audio offload.
+
+ - SOC USB - Maintains the current status of the offload path, and device
+ (USB sound card and PCM device) information. This would be the main
+ card that applications can read to determine offloading capabilities.
+
+Implementation
+--------------
+
+**Example:**
+
+ **Sound Cards**:
+
+ ::
+
+ 0 [SM8250MTPWCD938]: sm8250 - SM8250-MTP-WCD9380-WSA8810-VA-D
+ SM8250-MTP-WCD9380-WSA8810-VA-DMIC
+ 1 [C320M ]: USB-Audio - Plantronics C320-M
+ Plantronics Plantronics C320-M at usb-xhci-hcd.1.auto-1, full speed
+
+
+ **Platform Sound Card** - card#0:
+
+ ::
+
+ USB Offload Playback Route Status -1, -1 (range -1->32)
+ USB Offload Playback Route Select 1, 0 (range -1->32)
+
+
+ **USB Sound Card** - card#1:
+
+ ::
+
+ USB Offload Playback Capable Card 0 (range -1->32)
+
+
+The platform sound card(card#0) kcontrols are created as part of adding the SOC
+USB device using **snd_soc_usb_add_port()**. The following kcontrols are defined
+as:
+
+ - ``USB Offload Playback Route Status`` **(R)**: USB sound card and PCM device
+ index pair that defines which USB SND resources are currently offloaded. If
+ -1, -1 is seen, it signifies that offload is not active.
+ - ``USB Offload Playback Route Select`` **(R/W)**: USB sound card and PCM device
+ index pair which selects the USB device to initiate offloading on. If no value
+ is written to the kcontrol, then the last USB device discovered will be chosen.
+
+The USB sound card(card#1) kcontrols are created as USB audio devices are plugged
+into the physical USB port and enumerated. The kcontrols are defined as:
+
+ - ``USB Offload Playback Capable Card`` **(R)**: Provides the sound card
+ number/index that supports USB offloading. Further/follow up queries about
+ the current offload state can be handled by reading the offload status
+ kcontrol exposed by the platform card.
+
+USB Offload Playback Route Select Kcontrol
+------------------------------------------
+In order to allow for vendor specific implementations on audio offloading device
+selection, the SOC USB layer exposes the following:
+
+.. code-block:: rst
+
+ int (*put_offload_dev)(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol);
+ int (*get_offload_dev)(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol);
+..
+
+These are specific for the **USB Offload Playback Route Select** kcontrol.
+
+When users issue get/put calls to the kcontrol, the registered SOC USB callbacks
+will execute the registered function calls to the DPCM BE DAI link.
+
+**Callback Registration:**
+
+.. code-block:: rst
+
+ static int q6usb_component_probe(struct snd_soc_component *component)
+ {
+ ...
+ usb = snd_soc_usb_allocate_port(component, 1, &data->priv);
+ if (IS_ERR(usb))
+ return -ENOMEM;
+
+ usb->connection_status_cb = q6usb_alsa_connection_cb;
+ usb->put_offload_dev = q6usb_put_offload_dev;
+ usb->get_offload_dev = q6usb_get_offload_dev;
+
+ ret = snd_soc_usb_add_port(usb);
+..
+
+**PUT Callback:**
+
+Can be used to track current device selection, and to issue any external DSP
+commands that might be required for enabling audio offloading.
+
+.. code-block:: rst
+
+ static int q6usb_put_offload_dev(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+ {
+ ...
+ if ((cardidx >= 0 && test_bit(cardidx, &data->available_card_slot))) {
+ data->sel_card_idx = cardidx;
+ changed = 1;
+ }
+
+ if ((pcmidx >= 0 && pcmidx < data->status[cardidx].sdev->num_playback)) {
+ data->sel_pcm_idx = pcmidx;
+ changed = 1;
+ }
+..
+
+The above is an example of keeping track of what the userspace entity is
+selecting as the playback device. This can be later used to pass the information
+along to the external DSP.
+
+
+USB Offload Playback Route Status
+---------------------------------
+SOC USB exposes APIs for keeping track of the offloading state, and expects this
+to be maintained by the BE DAI link that created/added the SOC USB device.
+
+**SOC USB State Flow Example**
+
+::
+
+ PCM Core | BE USB DAI Link | SOC USB
+ | |
+ snd_pcm_hw_params --------> dai_link->ops->hw_params --> snd_soc_usb_prepare_session
+ | | |--> state = SND_SOC_USB_PREPARED
+ ... | | |--> slot[0] now active
+ | |
+ | |
+ snd_pcm_do_prepare--------> dai_link->ops->prepare ---> snd_soc_usb_set_session_state
+ | | |--> state = SND_SOC_USB_RUNNING
+ ... | |
+ | |
+ snd_pcm_release_substream-> dai_link->ops->shutdown---> snd_soc_usb_shutdown_session
+ | | |--> state = SND_SOC_USB_IDLE
+ | | |--> slot[0] now idle
+
+
+When executing the kcontrol get callback, it will loop across the active_list array
+and report to the application for active USB sound card and USB PCM device indexes.
+
+USB Offload Playback Capable Card
+---------------------------------
+USB sound also creates a kcontrol for applications to help determine which platform
+sound card USB offloading is linked to. This will allow applications to further
+query the platform sound card for specific information about the current USB offload
+status.
+
+This is added as a separate mixer driver:
+ - mixer_usb_offload.c
+ - kcontrol: snd_usb_offload_available_ctl
+
+**snd_usb_offload_available_get()** fetches the associated sound card by utilizing
+the **snd_soc_usb_device_offload_available()** API.
+
+Mixer Examples
+--------------
+
+ ::
+
+ tinymix -D 0 set 'USB Offload Playback Route Select' 2 0
+
+
+ ::
+
+ tinymix -D 0 get 'USB Offload Playback Route Select'
+ --> 2, 0 (range 0->32)
+
+ ::
+
+ tinymix -D 0 get 'USB Offload Playback Route Status'
+ --> 2, 0 (range -1->32) [OFFLD active]
+ --> -1, -1 (range -1->32) [OFFLD idle]
+
+ ::
+
+ tinymix -D 0 get 'USB Offload Playback Capable Card'
+ --> 0 (range 0->32)
For USB offloading situations, the AFE port start command will result in a
QMI handshake between the Q6DSP and the main processor. Depending on if
the USB bus is suspended, this routine would require more time to complete,
as resuming the USB bus has some overhead associated with it. Increase the
timeout to 3s to allow for sufficient time for the USB QMI stream enable
handshake to complete.
Reviewed-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/soc/qcom/qdsp6/q6afe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
index 948007955934..452d7e8b9b30 100644
--- a/sound/soc/qcom/qdsp6/q6afe.c
+++ b/sound/soc/qcom/qdsp6/q6afe.c
@@ -366,7 +366,7 @@
#define AFE_API_VERSION_SLOT_MAPPING_CONFIG 1
#define AFE_API_VERSION_CODEC_DMA_CONFIG 1
-#define TIMEOUT_MS 1000
+#define TIMEOUT_MS 3000
#define AFE_CMD_RESP_AVAIL 0
#define AFE_CMD_RESP_NONE 1
#define AFE_CLK_TOKEN 1024
Currently, only the index to the USB SND card array is passed to the USB
backend. Pass through more information, specifically the USB SND card
number and the number of PCM devices available. This allows for the DPCM
backend to determine what USB resources are available during situations,
such as USB audio offloading.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/qcom/qc_audio_offload.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index db68c6c605eb..4deec0b6fc08 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -170,6 +170,21 @@ enum usb_qmi_audio_format {
USB_QMI_PCM_FORMAT_U32_BE,
};
+static int usb_qmi_get_pcm_num(struct snd_usb_audio *chip, int direction)
+{
+ struct snd_usb_substream *subs = NULL;
+ struct snd_usb_stream *as;
+ int count = 0;
+
+ list_for_each_entry(as, &chip->pcm_list, list) {
+ subs = &as->substream[direction];
+ if (subs->ep_num)
+ count++;
+ }
+
+ return count;
+}
+
static enum usb_qmi_audio_device_speed_enum_v01
get_speed_info(enum usb_device_speed udev_speed)
{
@@ -1638,6 +1653,8 @@ static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
sdev->card_idx = chip->card->number;
sdev->chip_idx = chip->index;
+ sdev->num_playback = usb_qmi_get_pcm_num(chip, 0);
+ sdev->num_capture = usb_qmi_get_pcm_num(chip, 1);
uadev[chip->card->number].sdev = sdev;
uaudio_qdev->last_card_num = chip->card->number;
From: Mathias Nyman <[email protected]>
Expose xhci_stop_endpoint_sync() which is a synchronous variant of
xhci_queue_stop_endpoint(). This is useful for client drivers that are
using the secondary interrupters, and need to stop/clean up the current
session. The stop endpoint command handler will also take care of cleaning
up the ring.
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Wesley Cheng <[email protected]>
---
drivers/usb/host/xhci.c | 39 +++++++++++++++++++++++++++++++++++++++
drivers/usb/host/xhci.h | 2 ++
2 files changed, 41 insertions(+)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8579603edaff..0680f4703c92 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2784,6 +2784,45 @@ static int xhci_reserve_bandwidth(struct xhci_hcd *xhci,
return -ENOMEM;
}
+/*
+ * Synchronous XHCI stop endpoint helper. Issues the stop endpoint command and
+ * waits for the command completion before returning.
+ */
+int xhci_stop_endpoint_sync(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, int suspend,
+ gfp_t gfp_flags)
+{
+ struct xhci_command *command;
+ unsigned long flags;
+ int ret;
+
+ command = xhci_alloc_command(xhci, true, gfp_flags);
+ if (!command)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_stop_endpoint(xhci, command, ep->vdev->slot_id,
+ ep->ep_index, suspend);
+ if (ret < 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ goto out;
+ }
+
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ wait_for_completion(command->completion);
+
+ if (command->status == COMP_COMMAND_ABORTED ||
+ command->status == COMP_COMMAND_RING_STOPPED) {
+ xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
+ ret = -ETIME;
+ }
+out:
+ xhci_free_command(xhci, command);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(xhci_stop_endpoint_sync);
/* Issue a configure endpoint command or evaluate context command
* and wait for it to finish.
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6f4bf98a6282..0f3ae08507ed 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1921,6 +1921,8 @@ void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
void xhci_cleanup_command_queue(struct xhci_hcd *xhci);
void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring);
unsigned int count_trbs(u64 addr, u64 len);
+int xhci_stop_endpoint_sync(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
+ int suspend, gfp_t gfp_flags);
/* xHCI roothub code */
void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
The QC ADSP is able to support USB playback endpoints, so that the main
application processor can be placed into lower CPU power modes. This adds
the required AFE port configurations and port start command to start an
audio session.
Specifically, the QC ADSP can support all potential endpoints that are
exposed by the audio data interface. This includes, feedback endpoints
(both implicit and explicit) as well as the isochronous (data) endpoints.
The size of audio samples sent per USB frame (microframe) will be adjusted
based on information received on the feedback endpoint.
Some pre-requisites are needed before issuing the AFE port start command,
such as setting the USB AFE dev_token. This carries information about the
available USB SND cards and PCM devices that have been discovered on the
USB bus. The dev_token field is used by the audio DSP to notify the USB
offload driver of which card and PCM index to enable playback on.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/soc/qcom/qdsp6/q6afe-dai.c | 60 +++++++
sound/soc/qcom/qdsp6/q6afe.c | 191 ++++++++++++++++++++++-
sound/soc/qcom/qdsp6/q6afe.h | 36 ++++-
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 +++
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 +
sound/soc/qcom/qdsp6/q6routing.c | 9 ++
6 files changed, 318 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
index a9c4f896a7df..80b22d1a24d0 100644
--- a/sound/soc/qcom/qdsp6/q6afe-dai.c
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -92,6 +92,39 @@ static int q6hdmi_hw_params(struct snd_pcm_substream *substream,
return 0;
}
+static int q6afe_usb_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev);
+ int channels = params_channels(params);
+ int rate = params_rate(params);
+ struct q6afe_usb_cfg *usb = &dai_data->port_config[dai->id].usb_audio;
+
+ usb->sample_rate = rate;
+ usb->num_channels = channels;
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_U16_LE:
+ case SNDRV_PCM_FORMAT_S16_LE:
+ usb->bit_width = 16;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ case SNDRV_PCM_FORMAT_S24_3LE:
+ usb->bit_width = 24;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ usb->bit_width = 32;
+ break;
+ default:
+ dev_err(dai->dev, "%s: invalid format %d\n",
+ __func__, params_format(params));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int q6i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
@@ -392,6 +425,10 @@ static int q6afe_dai_prepare(struct snd_pcm_substream *substream,
q6afe_cdc_dma_port_prepare(dai_data->port[dai->id],
&dai_data->port_config[dai->id].dma_cfg);
break;
+ case USB_RX:
+ q6afe_usb_port_prepare(dai_data->port[dai->id],
+ &dai_data->port_config[dai->id].usb_audio);
+ break;
default:
return -EINVAL;
}
@@ -618,6 +655,9 @@ static const struct snd_soc_dapm_route q6afe_dapm_routes[] = {
{"TX_CODEC_DMA_TX_5", NULL, "TX_CODEC_DMA_TX_5 Capture"},
{"RX_CODEC_DMA_RX_6 Playback", NULL, "RX_CODEC_DMA_RX_6"},
{"RX_CODEC_DMA_RX_7 Playback", NULL, "RX_CODEC_DMA_RX_7"},
+
+ /* USB playback AFE port receives data for playback, hence use the RX port */
+ {"USB Playback", NULL, "USB_RX"},
};
static int msm_dai_q6_dai_probe(struct snd_soc_dai *dai)
@@ -645,6 +685,23 @@ static int msm_dai_q6_dai_remove(struct snd_soc_dai *dai)
return 0;
}
+static const struct snd_soc_dai_ops q6afe_usb_ops = {
+ .probe = msm_dai_q6_dai_probe,
+ .prepare = q6afe_dai_prepare,
+ .hw_params = q6afe_usb_hw_params,
+ /*
+ * Shutdown callback required to stop the USB AFE port, which is enabled
+ * by the prepare() stage. This stops the audio traffic on the USB AFE
+ * port on the Q6DSP.
+ */
+ .shutdown = q6afe_dai_shutdown,
+ /*
+ * Startup callback not needed, as AFE port start command passes the PCM
+ * parameters within the AFE command, which is provided by the PCM core
+ * during the prepare() stage.
+ */
+};
+
static const struct snd_soc_dai_ops q6hdmi_ops = {
.probe = msm_dai_q6_dai_probe,
.remove = msm_dai_q6_dai_remove,
@@ -943,6 +1000,8 @@ static const struct snd_soc_dapm_widget q6afe_dai_widgets[] = {
0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("RX_CODEC_DMA_RX_7", "NULL",
0, SND_SOC_NOPM, 0, 0),
+
+ SND_SOC_DAPM_AIF_IN("USB_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
};
static const struct snd_soc_component_driver q6afe_dai_component = {
@@ -1057,6 +1116,7 @@ static int q6afe_dai_dev_probe(struct platform_device *pdev)
cfg.q6i2s_ops = &q6i2s_ops;
cfg.q6tdm_ops = &q6tdm_ops;
cfg.q6dma_ops = &q6dma_ops;
+ cfg.q6usb_ops = &q6afe_usb_ops;
dais = q6dsp_audio_ports_set_config(dev, &cfg, &num_dais);
return devm_snd_soc_register_component(dev, &q6afe_dai_component, dais, num_dais);
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
index ef7557be5d66..948007955934 100644
--- a/sound/soc/qcom/qdsp6/q6afe.c
+++ b/sound/soc/qcom/qdsp6/q6afe.c
@@ -35,6 +35,8 @@
#define AFE_MODULE_TDM 0x0001028A
#define AFE_PARAM_ID_CDC_SLIMBUS_SLAVE_CFG 0x00010235
+#define AFE_PARAM_ID_USB_AUDIO_DEV_PARAMS 0x000102A5
+#define AFE_PARAM_ID_USB_AUDIO_DEV_LPCM_FMT 0x000102AA
#define AFE_PARAM_ID_LPAIF_CLK_CONFIG 0x00010238
#define AFE_PARAM_ID_INT_DIGITAL_CDC_CLK_CONFIG 0x00010239
@@ -44,6 +46,7 @@
#define AFE_PARAM_ID_TDM_CONFIG 0x0001029D
#define AFE_PARAM_ID_PORT_SLOT_MAPPING_CONFIG 0x00010297
#define AFE_PARAM_ID_CODEC_DMA_CONFIG 0x000102B8
+#define AFE_PARAM_ID_USB_AUDIO_CONFIG 0x000102A4
#define AFE_CMD_REMOTE_LPASS_CORE_HW_VOTE_REQUEST 0x000100f4
#define AFE_CMD_RSP_REMOTE_LPASS_CORE_HW_VOTE_REQUEST 0x000100f5
#define AFE_CMD_REMOTE_LPASS_CORE_HW_DEVOTE_REQUEST 0x000100f6
@@ -72,12 +75,16 @@
#define AFE_PORT_CONFIG_I2S_WS_SRC_INTERNAL 0x1
#define AFE_LINEAR_PCM_DATA 0x0
+#define AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG 0x1
/* Port IDs */
#define AFE_API_VERSION_HDMI_CONFIG 0x1
#define AFE_PORT_ID_MULTICHAN_HDMI_RX 0x100E
#define AFE_PORT_ID_HDMI_OVER_DP_RX 0x6020
+/* USB AFE port */
+#define AFE_PORT_ID_USB_RX 0x7000
+
#define AFE_API_VERSION_SLIMBUS_CONFIG 0x1
/* Clock set API version */
#define AFE_API_VERSION_CLOCK_SET 1
@@ -513,12 +520,96 @@ struct afe_param_id_cdc_dma_cfg {
u16 active_channels_mask;
} __packed;
+struct afe_param_id_usb_cfg {
+/* Minor version used for tracking USB audio device configuration.
+ * Supported values: AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
+ */
+ u32 cfg_minor_version;
+/* Sampling rate of the port.
+ * Supported values:
+ * - AFE_PORT_SAMPLE_RATE_8K
+ * - AFE_PORT_SAMPLE_RATE_11025
+ * - AFE_PORT_SAMPLE_RATE_12K
+ * - AFE_PORT_SAMPLE_RATE_16K
+ * - AFE_PORT_SAMPLE_RATE_22050
+ * - AFE_PORT_SAMPLE_RATE_24K
+ * - AFE_PORT_SAMPLE_RATE_32K
+ * - AFE_PORT_SAMPLE_RATE_44P1K
+ * - AFE_PORT_SAMPLE_RATE_48K
+ * - AFE_PORT_SAMPLE_RATE_96K
+ * - AFE_PORT_SAMPLE_RATE_192K
+ */
+ u32 sample_rate;
+/* Bit width of the sample.
+ * Supported values: 16, 24
+ */
+ u16 bit_width;
+/* Number of channels.
+ * Supported values: 1 and 2
+ */
+ u16 num_channels;
+/* Data format supported by the USB. The supported value is
+ * 0 (#AFE_USB_AUDIO_DATA_FORMAT_LINEAR_PCM).
+ */
+ u16 data_format;
+/* this field must be 0 */
+ u16 reserved;
+/* device token of actual end USB audio device */
+ u32 dev_token;
+/* endianness of this interface */
+ u32 endian;
+/* service interval */
+ u32 service_interval;
+} __packed;
+
+/**
+ * struct afe_param_id_usb_audio_dev_params
+ * @cfg_minor_version: Minor version used for tracking USB audio device
+ * configuration.
+ * Supported values:
+ * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
+ * @dev_token: device token of actual end USB audio device
+ **/
+struct afe_param_id_usb_audio_dev_params {
+ u32 cfg_minor_version;
+ u32 dev_token;
+} __packed;
+
+/**
+ * struct afe_param_id_usb_audio_dev_lpcm_fmt
+ * @cfg_minor_version: Minor version used for tracking USB audio device
+ * configuration.
+ * Supported values:
+ * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
+ * @endian: endianness of this interface
+ **/
+struct afe_param_id_usb_audio_dev_lpcm_fmt {
+ u32 cfg_minor_version;
+ u32 endian;
+} __packed;
+
+#define AFE_PARAM_ID_USB_AUDIO_SVC_INTERVAL 0x000102B7
+
+/**
+ * struct afe_param_id_usb_audio_svc_interval
+ * @cfg_minor_version: Minor version used for tracking USB audio device
+ * configuration.
+ * Supported values:
+ * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
+ * @svc_interval: service interval
+ **/
+struct afe_param_id_usb_audio_svc_interval {
+ u32 cfg_minor_version;
+ u32 svc_interval;
+} __packed;
+
union afe_port_config {
struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch;
struct afe_param_id_slimbus_cfg slim_cfg;
struct afe_param_id_i2s_cfg i2s_cfg;
struct afe_param_id_tdm_cfg tdm_cfg;
struct afe_param_id_cdc_dma_cfg dma_cfg;
+ struct afe_param_id_usb_cfg usb_cfg;
} __packed;
@@ -833,6 +924,7 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = {
RX_CODEC_DMA_RX_6, 1, 1},
[RX_CODEC_DMA_RX_7] = { AFE_PORT_ID_RX_CODEC_DMA_RX_7,
RX_CODEC_DMA_RX_7, 1, 1},
+ [USB_RX] = { AFE_PORT_ID_USB_RX, USB_RX, 1, 1},
};
static void q6afe_port_free(struct kref *ref)
@@ -1290,6 +1382,100 @@ void q6afe_tdm_port_prepare(struct q6afe_port *port,
}
EXPORT_SYMBOL_GPL(q6afe_tdm_port_prepare);
+/**
+ * afe_port_send_usb_dev_param() - Send USB dev token
+ *
+ * @port: Instance of afe port
+ * @cardidx: USB SND card index to reference
+ * @pcmidx: USB SND PCM device index to reference
+ *
+ * The USB dev token carries information about which USB SND card instance and
+ * PCM device to execute the offload on. This information is carried through
+ * to the stream enable QMI request, which is handled by the offload class
+ * driver. The information is parsed to determine which USB device to query
+ * the required resources for.
+ */
+int afe_port_send_usb_dev_param(struct q6afe_port *port, int cardidx, int pcmidx)
+{
+ struct afe_param_id_usb_audio_dev_params usb_dev;
+ int ret;
+
+ memset(&usb_dev, 0, sizeof(usb_dev));
+
+ usb_dev.cfg_minor_version = AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG;
+ usb_dev.dev_token = (cardidx << 16) | (pcmidx << 8);
+ ret = q6afe_port_set_param_v2(port, &usb_dev,
+ AFE_PARAM_ID_USB_AUDIO_DEV_PARAMS,
+ AFE_MODULE_AUDIO_DEV_INTERFACE, sizeof(usb_dev));
+ if (ret)
+ dev_err(port->afe->dev, "%s: AFE device param cmd failed %d\n",
+ __func__, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(afe_port_send_usb_dev_param);
+
+static int afe_port_send_usb_params(struct q6afe_port *port, struct q6afe_usb_cfg *cfg)
+{
+ union afe_port_config *pcfg = &port->port_cfg;
+ struct afe_param_id_usb_audio_dev_lpcm_fmt lpcm_fmt;
+ struct afe_param_id_usb_audio_svc_interval svc_int;
+ int ret;
+
+ if (!pcfg) {
+ dev_err(port->afe->dev, "%s: Error, no configuration data\n", __func__);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ memset(&lpcm_fmt, 0, sizeof(lpcm_fmt));
+ memset(&svc_int, 0, sizeof(svc_int));
+
+ lpcm_fmt.cfg_minor_version = AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG;
+ lpcm_fmt.endian = pcfg->usb_cfg.endian;
+ ret = q6afe_port_set_param_v2(port, &lpcm_fmt,
+ AFE_PARAM_ID_USB_AUDIO_DEV_LPCM_FMT,
+ AFE_MODULE_AUDIO_DEV_INTERFACE, sizeof(lpcm_fmt));
+ if (ret) {
+ dev_err(port->afe->dev, "%s: AFE device param cmd LPCM_FMT failed %d\n",
+ __func__, ret);
+ goto exit;
+ }
+
+ svc_int.cfg_minor_version = AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG;
+ svc_int.svc_interval = pcfg->usb_cfg.service_interval;
+ ret = q6afe_port_set_param_v2(port, &svc_int,
+ AFE_PARAM_ID_USB_AUDIO_SVC_INTERVAL,
+ AFE_MODULE_AUDIO_DEV_INTERFACE, sizeof(svc_int));
+ if (ret)
+ dev_err(port->afe->dev, "%s: AFE device param cmd svc_interval failed %d\n",
+ __func__, ret);
+
+exit:
+ return ret;
+}
+
+/**
+ * q6afe_usb_port_prepare() - Prepare usb afe port.
+ *
+ * @port: Instance of afe port
+ * @cfg: USB configuration for the afe port
+ *
+ */
+void q6afe_usb_port_prepare(struct q6afe_port *port,
+ struct q6afe_usb_cfg *cfg)
+{
+ union afe_port_config *pcfg = &port->port_cfg;
+
+ pcfg->usb_cfg.cfg_minor_version = AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG;
+ pcfg->usb_cfg.sample_rate = cfg->sample_rate;
+ pcfg->usb_cfg.num_channels = cfg->num_channels;
+ pcfg->usb_cfg.bit_width = cfg->bit_width;
+
+ afe_port_send_usb_params(port, cfg);
+}
+EXPORT_SYMBOL_GPL(q6afe_usb_port_prepare);
+
/**
* q6afe_hdmi_port_prepare() - Prepare hdmi afe port.
*
@@ -1612,7 +1798,10 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id)
break;
case AFE_PORT_ID_WSA_CODEC_DMA_RX_0 ... AFE_PORT_ID_RX_CODEC_DMA_RX_7:
cfg_type = AFE_PARAM_ID_CODEC_DMA_CONFIG;
- break;
+ break;
+ case AFE_PORT_ID_USB_RX:
+ cfg_type = AFE_PARAM_ID_USB_AUDIO_CONFIG;
+ break;
default:
dev_err(dev, "Invalid port id 0x%x\n", port_id);
return ERR_PTR(-EINVAL);
diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h
index 65d0676075e1..04c70f904b86 100644
--- a/sound/soc/qcom/qdsp6/q6afe.h
+++ b/sound/soc/qcom/qdsp6/q6afe.h
@@ -3,7 +3,7 @@
#ifndef __Q6AFE_H__
#define __Q6AFE_H__
-#define AFE_PORT_MAX 129
+#define AFE_PORT_MAX 137
#define MSM_AFE_PORT_TYPE_RX 0
#define MSM_AFE_PORT_TYPE_TX 1
@@ -203,6 +203,36 @@ struct q6afe_cdc_dma_cfg {
u16 active_channels_mask;
};
+/**
+ * struct q6afe_usb_cfg
+ * @cfg_minor_version: Minor version used for tracking USB audio device
+ * configuration.
+ * Supported values:
+ * AFE_API_MINOR_VERSION_USB_AUDIO_CONFIG
+ * @sample_rate: Sampling rate of the port
+ * Supported values:
+ * AFE_PORT_SAMPLE_RATE_8K
+ * AFE_PORT_SAMPLE_RATE_11025
+ * AFE_PORT_SAMPLE_RATE_12K
+ * AFE_PORT_SAMPLE_RATE_16K
+ * AFE_PORT_SAMPLE_RATE_22050
+ * AFE_PORT_SAMPLE_RATE_24K
+ * AFE_PORT_SAMPLE_RATE_32K
+ * AFE_PORT_SAMPLE_RATE_44P1K
+ * AFE_PORT_SAMPLE_RATE_48K
+ * AFE_PORT_SAMPLE_RATE_96K
+ * AFE_PORT_SAMPLE_RATE_192K
+ * @bit_width: Bit width of the sample.
+ * Supported values: 16, 24
+ * @num_channels: Number of channels
+ * Supported values: 1, 2
+ **/
+struct q6afe_usb_cfg {
+ u32 cfg_minor_version;
+ u32 sample_rate;
+ u16 bit_width;
+ u16 num_channels;
+};
struct q6afe_port_config {
struct q6afe_hdmi_cfg hdmi;
@@ -210,6 +240,7 @@ struct q6afe_port_config {
struct q6afe_i2s_cfg i2s_cfg;
struct q6afe_tdm_cfg tdm;
struct q6afe_cdc_dma_cfg dma_cfg;
+ struct q6afe_usb_cfg usb_audio;
};
struct q6afe_port;
@@ -219,6 +250,8 @@ int q6afe_port_start(struct q6afe_port *port);
int q6afe_port_stop(struct q6afe_port *port);
void q6afe_port_put(struct q6afe_port *port);
int q6afe_get_port_id(int index);
+void q6afe_usb_port_prepare(struct q6afe_port *port,
+ struct q6afe_usb_cfg *cfg);
void q6afe_hdmi_port_prepare(struct q6afe_port *port,
struct q6afe_hdmi_cfg *cfg);
void q6afe_slim_port_prepare(struct q6afe_port *port,
@@ -228,6 +261,7 @@ void q6afe_tdm_port_prepare(struct q6afe_port *port, struct q6afe_tdm_cfg *cfg);
void q6afe_cdc_dma_port_prepare(struct q6afe_port *port,
struct q6afe_cdc_dma_cfg *cfg);
+int afe_port_send_usb_dev_param(struct q6afe_port *port, int cardidx, int pcmidx);
int q6afe_port_set_sysclk(struct q6afe_port *port, int clk_id,
int clk_src, int clk_root,
unsigned int freq, int dir);
diff --git a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
index 4919001de08b..4a96b11f7fd1 100644
--- a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
+++ b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
@@ -97,6 +97,26 @@
}
static struct snd_soc_dai_driver q6dsp_audio_fe_dais[] = {
+ {
+ .playback = {
+ .stream_name = "USB Playback",
+ .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
+ SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |
+ SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
+ .channels_min = 1,
+ .channels_max = 2,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
+ .id = USB_RX,
+ .name = "USB_RX",
+ },
{
.playback = {
.stream_name = "HDMI Playback",
@@ -624,6 +644,9 @@ struct snd_soc_dai_driver *q6dsp_audio_ports_set_config(struct device *dev,
case WSA_CODEC_DMA_RX_0 ... RX_CODEC_DMA_RX_7:
q6dsp_audio_fe_dais[i].ops = cfg->q6dma_ops;
break;
+ case USB_RX:
+ q6dsp_audio_fe_dais[i].ops = cfg->q6usb_ops;
+ break;
default:
break;
}
diff --git a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h
index 7f052c8a1257..d8dde6dd0aca 100644
--- a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h
+++ b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h
@@ -11,6 +11,7 @@ struct q6dsp_audio_port_dai_driver_config {
const struct snd_soc_dai_ops *q6i2s_ops;
const struct snd_soc_dai_ops *q6tdm_ops;
const struct snd_soc_dai_ops *q6dma_ops;
+ const struct snd_soc_dai_ops *q6usb_ops;
};
struct snd_soc_dai_driver *q6dsp_audio_ports_set_config(struct device *dev,
diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
index 81fde0681f95..45811f0f0d44 100644
--- a/sound/soc/qcom/qdsp6/q6routing.c
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -515,6 +515,9 @@ static int msm_routing_put_audio_mixer(struct snd_kcontrol *kcontrol,
return 1;
}
+static const struct snd_kcontrol_new usb_mixer_controls[] = {
+ Q6ROUTING_RX_MIXERS(USB_RX) };
+
static const struct snd_kcontrol_new hdmi_mixer_controls[] = {
Q6ROUTING_RX_MIXERS(HDMI_RX) };
@@ -950,6 +953,10 @@ static const struct snd_soc_dapm_widget msm_qdsp6_widgets[] = {
SND_SOC_DAPM_MIXER("MultiMedia8 Mixer", SND_SOC_NOPM, 0, 0,
mmul8_mixer_controls, ARRAY_SIZE(mmul8_mixer_controls)),
+ SND_SOC_DAPM_MIXER("USB Mixer", SND_SOC_NOPM, 0, 0,
+ usb_mixer_controls,
+ ARRAY_SIZE(usb_mixer_controls)),
+
};
static const struct snd_soc_dapm_route intercon[] = {
@@ -1043,6 +1050,8 @@ static const struct snd_soc_dapm_route intercon[] = {
{"MM_UL6", NULL, "MultiMedia6 Mixer"},
{"MM_UL7", NULL, "MultiMedia7 Mixer"},
{"MM_UL8", NULL, "MultiMedia8 Mixer"},
+
+ Q6ROUTING_RX_DAPM_ROUTE("USB Mixer", "USB_RX"),
};
static int routing_hw_params(struct snd_soc_component *component,
Some clients may operate only on a specific XHCI interrupter instance.
Allow for the associated class driver to request for the interrupter that
it requires.
Signed-off-by: Wesley Cheng <[email protected]>
---
drivers/usb/host/xhci-mem.c | 30 ++++++++++++++++--------------
drivers/usb/host/xhci-sideband.c | 4 ++--
drivers/usb/host/xhci.h | 2 +-
include/linux/usb/xhci-sideband.h | 2 +-
4 files changed, 20 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d686de0581b3..2b6ffd28a4a7 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2349,7 +2349,7 @@ xhci_add_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
}
struct xhci_interrupter *
-xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg)
+xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg, int intr_num)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct xhci_interrupter *ir;
@@ -2364,28 +2364,30 @@ xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg)
return NULL;
spin_lock_irq(&xhci->lock);
-
- /* Find available secondary interrupter, interrupter 0 is reserved for primary */
+ /* Find available secondary interrupter, interrupter 0 is reserverd for primary */
for (i = 1; i < xhci->max_interrupters; i++) {
- if (xhci->interrupters[i] == NULL) {
- err = xhci_add_interrupter(xhci, ir, i);
- break;
+ if ((intr_num > 0 && i == intr_num) || intr_num <= 0) {
+ if (xhci->interrupters[i] == NULL) {
+ err = xhci_add_interrupter(xhci, ir, i);
+ if (err) {
+ spin_unlock_irq(&xhci->lock);
+ goto free_ir;
+ }
+ break;
+ }
}
}
-
spin_unlock_irq(&xhci->lock);
- if (err) {
- xhci_warn(xhci, "Failed to add secondary interrupter, max interrupters %d\n",
- xhci->max_interrupters);
- xhci_free_interrupter(xhci, ir);
- return NULL;
- }
-
xhci_dbg(xhci, "Add secondary interrupter %d, max interrupters %d\n",
i, xhci->max_interrupters);
return ir;
+
+free_ir:
+ xhci_free_interrupter(xhci, ir);
+
+ return NULL;
}
EXPORT_SYMBOL_GPL(xhci_create_secondary_interrupter);
diff --git a/drivers/usb/host/xhci-sideband.c b/drivers/usb/host/xhci-sideband.c
index 6fdae9840c11..f3ca399ddc7c 100644
--- a/drivers/usb/host/xhci-sideband.c
+++ b/drivers/usb/host/xhci-sideband.c
@@ -278,7 +278,7 @@ EXPORT_SYMBOL_GPL(xhci_sideband_enable_interrupt);
*/
int
xhci_sideband_create_interrupter(struct xhci_sideband *sb, int num_seg,
- bool ip_autoclear)
+ int intr_num, bool ip_autoclear)
{
int ret = 0;
@@ -292,7 +292,7 @@ xhci_sideband_create_interrupter(struct xhci_sideband *sb, int num_seg,
}
sb->ir = xhci_create_secondary_interrupter(xhci_to_hcd(sb->xhci),
- num_seg);
+ num_seg, intr_num);
if (!sb->ir) {
ret = -ENOMEM;
goto out;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 79dc3801d359..4068eafd26c3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1838,7 +1838,7 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
void xhci_free_container_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx);
struct xhci_interrupter *
-xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg);
+xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg, int intr_num);
void xhci_remove_secondary_interrupter(struct usb_hcd
*hcd, struct xhci_interrupter *ir);
void xhci_skip_sec_intr_events(struct xhci_hcd *xhci,
diff --git a/include/linux/usb/xhci-sideband.h b/include/linux/usb/xhci-sideband.h
index a749ae307ba7..1026502739c5 100644
--- a/include/linux/usb/xhci-sideband.h
+++ b/include/linux/usb/xhci-sideband.h
@@ -58,7 +58,7 @@ int xhci_sideband_enable_interrupt(struct xhci_sideband *sb, u32 imod_interval);
int
xhci_sideband_create_interrupter(struct xhci_sideband *sb, int num_seg,
- bool ip_autoclear);
+ int intr_num, bool ip_autoclear);
void
xhci_sideband_remove_interrupter(struct xhci_sideband *sb);
Q6DSP supports handling of USB playback audio data if USB audio offloading
is enabled. Add a new definition for the USB_RX AFE port, which is
referenced when the AFE port is started.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Wesley Cheng <[email protected]>
---
include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h b/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
index 39f203256c4f..6d1ce7f5da51 100644
--- a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
+++ b/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
@@ -139,6 +139,7 @@
#define DISPLAY_PORT_RX_5 133
#define DISPLAY_PORT_RX_6 134
#define DISPLAY_PORT_RX_7 135
+#define USB_RX 136
#define LPASS_CLK_ID_PRI_MI2S_IBIT 1
#define LPASS_CLK_ID_PRI_MI2S_EBIT 2
Within the UAC descriptor, there is information describing the size of a
sample (bSubframeSize/bSubslotSize) and the number of relevant bits
(bBitResolution). Currently, fmt_bits carries only the bit resolution,
however, some offloading entities may also require the overall size of the
sample. Save this information in a separate parameter, as depending on the
UAC format type, the sample size can not easily be decoded from other
exisiting parameters.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/card.h | 1 +
sound/usb/format.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 2884912adc96..02e4ea898db5 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -15,6 +15,7 @@ struct audioformat {
unsigned int channels; /* # channels */
unsigned int fmt_type; /* USB audio format type (1-3) */
unsigned int fmt_bits; /* number of significant bits */
+ unsigned int fmt_sz; /* overall audio sub frame/slot size */
unsigned int frame_size; /* samples per frame for non-audio */
unsigned char iface; /* interface number */
unsigned char altsetting; /* corresponding alternate setting */
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 3b45d0ee7693..5fde543536a8 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -80,6 +80,7 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
}
fp->fmt_bits = sample_width;
+ fp->fmt_sz = sample_bytes;
if ((pcm_formats == 0) &&
(format == 0 || format == (1 << UAC_FORMAT_TYPE_I_UNDEFINED))) {
Several Qualcomm SoCs have a dedicated audio DSP, which has the ability to
support USB sound devices. This vendor driver will implement the required
handshaking with the DSP, in order to pass along required resources that
will be utilized by the DSP's USB SW. The communication channel used for
this handshaking will be using the QMI protocol. Required resources
include:
- Allocated secondary event ring address
- EP transfer ring address
- Interrupter number
The above information will allow for the audio DSP to execute USB transfers
over the USB bus. It will also be able to support devices that have an
implicit feedback and sync endpoint as well. Offloading these data
transfers will allow the main/applications processor to enter lower CPU
power modes, and sustain a longer duration in those modes.
Audio offloading is initiated with the following sequence:
1. Userspace configures to route audio playback to USB backend and starts
playback on the platform soundcard.
2. The Q6DSP AFE will communicate to the audio DSP to start the USB AFE
port.
3. This results in a QMI packet with a STREAM enable command.
4. The QC audio offload driver will fetch the required resources, and pass
this information as part of the QMI response to the STREAM enable command.
5. Once the QMI response is received the audio DSP will start queuing data
on the USB bus.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/Kconfig | 15 +
sound/usb/Makefile | 2 +-
sound/usb/qcom/Makefile | 2 +
sound/usb/qcom/qc_audio_offload.c | 1883 +++++++++++++++++++++++++++++
4 files changed, 1901 insertions(+), 1 deletion(-)
create mode 100644 sound/usb/qcom/Makefile
create mode 100644 sound/usb/qcom/qc_audio_offload.c
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 4a9569a3a39a..5cc3eaf53e6b 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -176,6 +176,21 @@ config SND_BCD2000
To compile this driver as a module, choose M here: the module
will be called snd-bcd2000.
+config SND_USB_AUDIO_QMI
+ tristate "Qualcomm Audio Offload driver"
+ depends on QCOM_QMI_HELPERS && SND_USB_AUDIO && USB_XHCI_SIDEBAND && SND_SOC_USB
+ select SND_PCM
+ help
+ Say Y here to enable the Qualcomm USB audio offloading feature.
+
+ This module sets up the required QMI stream enable/disable
+ responses to requests generated by the audio DSP. It passes the
+ USB transfer resource references, so that the audio DSP can issue
+ USB transfers to the host controller.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-usb-audio-qmi.
+
source "sound/usb/line6/Kconfig"
endif # SND_USB
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index 8c657c2753c8..246788268ddd 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -34,5 +34,5 @@ obj-$(CONFIG_SND_USB_UA101) += snd-usbmidi-lib.o
obj-$(CONFIG_SND_USB_USX2Y) += snd-usbmidi-lib.o
obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o
-obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/ bcd2000/
+obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/ bcd2000/ qcom/
obj-$(CONFIG_SND_USB_LINE6) += line6/
diff --git a/sound/usb/qcom/Makefile b/sound/usb/qcom/Makefile
new file mode 100644
index 000000000000..a81c9b28d484
--- /dev/null
+++ b/sound/usb/qcom/Makefile
@@ -0,0 +1,2 @@
+snd-usb-audio-qmi-objs := usb_audio_qmi_v01.o qc_audio_offload.o
+obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o
\ No newline at end of file
diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
new file mode 100644
index 000000000000..3b7780cb288a
--- /dev/null
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -0,0 +1,1883 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
+#include <linux/init.h>
+#include <linux/iommu.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/soc/qcom/qmi.h>
+#include <linux/usb.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+#include <linux/usb/audio-v3.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/quirks.h>
+#include <linux/usb/xhci-sideband.h>
+
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/q6usboffload.h>
+#include <sound/soc.h>
+#include <sound/soc-usb.h>
+
+#include "../usbaudio.h"
+#include "../card.h"
+#include "../endpoint.h"
+#include "../format.h"
+#include "../helper.h"
+#include "../pcm.h"
+#include "../power.h"
+
+#include "usb_audio_qmi_v01.h"
+
+/* Stream disable request timeout during USB device disconnect */
+#define DEV_RELEASE_WAIT_TIMEOUT 10000 /* in ms */
+
+/* Data interval calculation parameters */
+#define BUS_INTERVAL_FULL_SPEED 1000 /* in us */
+#define BUS_INTERVAL_HIGHSPEED_AND_ABOVE 125 /* in us */
+#define MAX_BINTERVAL_ISOC_EP 16
+
+#define QMI_STREAM_REQ_CARD_NUM_MASK 0xffff0000
+#define QMI_STREAM_REQ_DEV_NUM_MASK 0xff00
+#define QMI_STREAM_REQ_DIRECTION 0xff
+
+/* iommu resource parameters and management */
+#define PREPEND_SID_TO_IOVA(iova, sid) ((u64)(((u64)(iova)) | \
+ (((u64)sid) << 32)))
+#define IOVA_MASK(iova) (((u64)(iova)) & 0xFFFFFFFF)
+#define IOVA_BASE 0x1000
+#define IOVA_XFER_RING_BASE (IOVA_BASE + PAGE_SIZE * (SNDRV_CARDS + 1))
+#define IOVA_XFER_BUF_BASE (IOVA_XFER_RING_BASE + PAGE_SIZE * SNDRV_CARDS * 32)
+#define IOVA_XFER_RING_MAX (IOVA_XFER_BUF_BASE - PAGE_SIZE)
+#define IOVA_XFER_BUF_MAX (0xfffff000 - PAGE_SIZE)
+
+#define MAX_XFER_BUFF_LEN (24 * PAGE_SIZE)
+
+struct iova_info {
+ struct list_head list;
+ unsigned long start_iova;
+ size_t size;
+ bool in_use;
+};
+
+struct intf_info {
+ unsigned long data_xfer_ring_va;
+ size_t data_xfer_ring_size;
+ unsigned long sync_xfer_ring_va;
+ size_t sync_xfer_ring_size;
+ unsigned long xfer_buf_va;
+ size_t xfer_buf_size;
+ phys_addr_t xfer_buf_pa;
+ unsigned int data_ep_pipe;
+ unsigned int sync_ep_pipe;
+ u8 *xfer_buf;
+ u8 intf_num;
+ u8 pcm_card_num;
+ u8 pcm_dev_num;
+ u8 direction;
+ bool in_use;
+};
+
+struct uaudio_qmi_dev {
+ struct device *dev;
+ struct q6usb_offload *data;
+
+ /* list to keep track of available iova */
+ struct list_head xfer_ring_list;
+ size_t xfer_ring_iova_size;
+ unsigned long curr_xfer_ring_iova;
+ struct list_head xfer_buf_list;
+ size_t xfer_buf_iova_size;
+ unsigned long curr_xfer_buf_iova;
+
+ /* bit fields representing pcm card enabled */
+ unsigned long card_slot;
+ /* indicate event ring mapped or not */
+ bool er_mapped;
+ /* reference count to number of possible consumers */
+ atomic_t qdev_in_use;
+ /* idx to last udev card number plugged in */
+ unsigned int last_card_num;
+};
+
+struct uaudio_dev {
+ struct usb_device *udev;
+ /* audio control interface */
+ struct usb_host_interface *ctrl_intf;
+ unsigned int usb_core_id;
+ atomic_t in_use;
+ struct kref kref;
+ wait_queue_head_t disconnect_wq;
+
+ /* interface specific */
+ int num_intf;
+ struct intf_info *info;
+ struct snd_usb_audio *chip;
+
+ /* xhci sideband */
+ struct xhci_sideband *sb;
+
+ /* SoC USB device */
+ struct snd_soc_usb_device *sdev;
+};
+
+static struct uaudio_dev uadev[SNDRV_CARDS];
+static struct uaudio_qmi_dev *uaudio_qdev;
+static struct uaudio_qmi_svc *uaudio_svc;
+static DEFINE_MUTEX(qdev_mutex);
+
+struct uaudio_qmi_svc {
+ struct qmi_handle *uaudio_svc_hdl;
+ struct sockaddr_qrtr client_sq;
+ bool client_connected;
+};
+
+enum mem_type {
+ MEM_EVENT_RING,
+ MEM_XFER_RING,
+ MEM_XFER_BUF,
+};
+
+/* Supported audio formats */
+enum usb_qmi_audio_format {
+ USB_QMI_PCM_FORMAT_S8 = 0,
+ USB_QMI_PCM_FORMAT_U8,
+ USB_QMI_PCM_FORMAT_S16_LE,
+ USB_QMI_PCM_FORMAT_S16_BE,
+ USB_QMI_PCM_FORMAT_U16_LE,
+ USB_QMI_PCM_FORMAT_U16_BE,
+ USB_QMI_PCM_FORMAT_S24_LE,
+ USB_QMI_PCM_FORMAT_S24_BE,
+ USB_QMI_PCM_FORMAT_U24_LE,
+ USB_QMI_PCM_FORMAT_U24_BE,
+ USB_QMI_PCM_FORMAT_S24_3LE,
+ USB_QMI_PCM_FORMAT_S24_3BE,
+ USB_QMI_PCM_FORMAT_U24_3LE,
+ USB_QMI_PCM_FORMAT_U24_3BE,
+ USB_QMI_PCM_FORMAT_S32_LE,
+ USB_QMI_PCM_FORMAT_S32_BE,
+ USB_QMI_PCM_FORMAT_U32_LE,
+ USB_QMI_PCM_FORMAT_U32_BE,
+};
+
+static enum usb_qmi_audio_device_speed_enum_v01
+get_speed_info(enum usb_device_speed udev_speed)
+{
+ switch (udev_speed) {
+ case USB_SPEED_LOW:
+ return USB_QMI_DEVICE_SPEED_LOW_V01;
+ case USB_SPEED_FULL:
+ return USB_QMI_DEVICE_SPEED_FULL_V01;
+ case USB_SPEED_HIGH:
+ return USB_QMI_DEVICE_SPEED_HIGH_V01;
+ case USB_SPEED_SUPER:
+ return USB_QMI_DEVICE_SPEED_SUPER_V01;
+ case USB_SPEED_SUPER_PLUS:
+ return USB_QMI_DEVICE_SPEED_SUPER_PLUS_V01;
+ default:
+ return USB_QMI_DEVICE_SPEED_INVALID_V01;
+ }
+}
+
+static struct snd_usb_substream *find_substream(unsigned int card_num,
+ unsigned int pcm_idx, unsigned int direction)
+{
+ struct snd_usb_substream *subs = NULL;
+ struct snd_usb_audio *chip;
+ struct snd_usb_stream *as;
+
+ chip = uadev[card_num].chip;
+ if (!chip || atomic_read(&chip->shutdown))
+ goto done;
+
+ if (pcm_idx >= chip->pcm_devs)
+ goto done;
+
+ if (direction > SNDRV_PCM_STREAM_CAPTURE)
+ goto done;
+
+ list_for_each_entry(as, &chip->pcm_list, list) {
+ if (as->pcm_index == pcm_idx) {
+ subs = &as->substream[direction];
+ goto done;
+ }
+ }
+
+done:
+ return subs;
+}
+
+static int info_idx_from_ifnum(int card_num, int intf_num, bool enable)
+{
+ int i;
+
+ /*
+ * default index 0 is used when info is allocated upon
+ * first enable audio stream req for a pcm device
+ */
+ if (enable && !uadev[card_num].info)
+ return 0;
+
+ for (i = 0; i < uadev[card_num].num_intf; i++) {
+ if (enable && !uadev[card_num].info[i].in_use)
+ return i;
+ else if (!enable &&
+ uadev[card_num].info[i].intf_num == intf_num)
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int get_data_interval_from_si(struct snd_usb_substream *subs,
+ u32 service_interval)
+{
+ unsigned int bus_intval_mult;
+ unsigned int bus_intval;
+ unsigned int binterval;
+
+ if (subs->dev->speed >= USB_SPEED_HIGH)
+ bus_intval = BUS_INTERVAL_HIGHSPEED_AND_ABOVE;
+ else
+ bus_intval = BUS_INTERVAL_FULL_SPEED;
+
+ if (service_interval % bus_intval)
+ return -EINVAL;
+
+ bus_intval_mult = service_interval / bus_intval;
+ binterval = ffs(bus_intval_mult);
+ if (!binterval || binterval > MAX_BINTERVAL_ISOC_EP)
+ return -EINVAL;
+
+ /* check if another bit is set then bail out */
+ bus_intval_mult = bus_intval_mult >> binterval;
+ if (bus_intval_mult)
+ return -EINVAL;
+
+ return (binterval - 1);
+}
+
+/* maps audio format received over QMI to asound.h based pcm format */
+static snd_pcm_format_t map_pcm_format(enum usb_qmi_audio_format fmt_received)
+{
+ switch (fmt_received) {
+ case USB_QMI_PCM_FORMAT_S8:
+ return SNDRV_PCM_FORMAT_S8;
+ case USB_QMI_PCM_FORMAT_U8:
+ return SNDRV_PCM_FORMAT_U8;
+ case USB_QMI_PCM_FORMAT_S16_LE:
+ return SNDRV_PCM_FORMAT_S16_LE;
+ case USB_QMI_PCM_FORMAT_S16_BE:
+ return SNDRV_PCM_FORMAT_S16_BE;
+ case USB_QMI_PCM_FORMAT_U16_LE:
+ return SNDRV_PCM_FORMAT_U16_LE;
+ case USB_QMI_PCM_FORMAT_U16_BE:
+ return SNDRV_PCM_FORMAT_U16_BE;
+ case USB_QMI_PCM_FORMAT_S24_LE:
+ return SNDRV_PCM_FORMAT_S24_LE;
+ case USB_QMI_PCM_FORMAT_S24_BE:
+ return SNDRV_PCM_FORMAT_S24_BE;
+ case USB_QMI_PCM_FORMAT_U24_LE:
+ return SNDRV_PCM_FORMAT_U24_LE;
+ case USB_QMI_PCM_FORMAT_U24_BE:
+ return SNDRV_PCM_FORMAT_U24_BE;
+ case USB_QMI_PCM_FORMAT_S24_3LE:
+ return SNDRV_PCM_FORMAT_S24_3LE;
+ case USB_QMI_PCM_FORMAT_S24_3BE:
+ return SNDRV_PCM_FORMAT_S24_3BE;
+ case USB_QMI_PCM_FORMAT_U24_3LE:
+ return SNDRV_PCM_FORMAT_U24_3LE;
+ case USB_QMI_PCM_FORMAT_U24_3BE:
+ return SNDRV_PCM_FORMAT_U24_3BE;
+ case USB_QMI_PCM_FORMAT_S32_LE:
+ return SNDRV_PCM_FORMAT_S32_LE;
+ case USB_QMI_PCM_FORMAT_S32_BE:
+ return SNDRV_PCM_FORMAT_S32_BE;
+ case USB_QMI_PCM_FORMAT_U32_LE:
+ return SNDRV_PCM_FORMAT_U32_LE;
+ case USB_QMI_PCM_FORMAT_U32_BE:
+ return SNDRV_PCM_FORMAT_U32_BE;
+ default:
+ /*
+ * We expect the caller to do input validation so we should
+ * never hit this. But we do have to return a proper
+ * snd_pcm_format_t value due to the __bitwise attribute; so
+ * just return the equivalent of 0 in case of bad input.
+ */
+ return SNDRV_PCM_FORMAT_S8;
+ }
+}
+
+/* Offloading IOMMU management */
+static unsigned long uaudio_get_iova(unsigned long *curr_iova,
+ size_t *curr_iova_size, struct list_head *head, size_t size)
+{
+ struct iova_info *info, *new_info = NULL;
+ struct list_head *curr_head;
+ size_t tmp_size = size;
+ unsigned long va = 0;
+ bool found = false;
+
+ if (size % PAGE_SIZE)
+ goto done;
+
+ if (size > *curr_iova_size)
+ goto done;
+
+ if (*curr_iova_size == 0)
+ goto done;
+
+ list_for_each_entry(info, head, list) {
+ /* exact size iova_info */
+ if (!info->in_use && info->size == size) {
+ info->in_use = true;
+ va = info->start_iova;
+ *curr_iova_size -= size;
+ found = true;
+ goto done;
+ } else if (!info->in_use && tmp_size >= info->size) {
+ if (!new_info)
+ new_info = info;
+ tmp_size -= info->size;
+ if (tmp_size)
+ continue;
+
+ va = new_info->start_iova;
+ for (curr_head = &new_info->list; curr_head !=
+ &info->list; curr_head = curr_head->next) {
+ new_info = list_entry(curr_head, struct
+ iova_info, list);
+ new_info->in_use = true;
+ }
+ info->in_use = true;
+ *curr_iova_size -= size;
+ found = true;
+ goto done;
+ } else {
+ /* iova region in use */
+ new_info = NULL;
+ tmp_size = size;
+ }
+ }
+
+ info = kzalloc(sizeof(struct iova_info), GFP_KERNEL);
+ if (!info) {
+ va = 0;
+ goto done;
+ }
+
+ va = info->start_iova = *curr_iova;
+ info->size = size;
+ info->in_use = true;
+ *curr_iova += size;
+ *curr_iova_size -= size;
+ found = true;
+ list_add_tail(&info->list, head);
+
+done:
+ return va;
+}
+
+static void uaudio_put_iova(unsigned long va, size_t size, struct list_head
+ *head, size_t *curr_iova_size)
+{
+ struct iova_info *info;
+ size_t tmp_size = size;
+ bool found = false;
+
+ list_for_each_entry(info, head, list) {
+ if (info->start_iova == va) {
+ if (!info->in_use)
+ return;
+
+ found = true;
+ info->in_use = false;
+ if (info->size == size)
+ goto done;
+ }
+
+ if (found && tmp_size >= info->size) {
+ info->in_use = false;
+ tmp_size -= info->size;
+ if (!tmp_size)
+ goto done;
+ }
+ }
+
+ if (!found)
+ return;
+
+done:
+ *curr_iova_size += size;
+}
+
+/**
+ * uaudio_iommu_unmap() - unmaps iommu memory for adsp
+ * @mtype: ring type
+ * @va: virtual address to unmap
+ * @iova_size: region size
+ * @mapped_iova_size: mapped region size
+ *
+ * Unmaps the memory region that was previously assigned to the adsp.
+ *
+ */
+static void uaudio_iommu_unmap(enum mem_type mtype, unsigned long va,
+ size_t iova_size, size_t mapped_iova_size)
+{
+ size_t umap_size;
+ bool unmap = true;
+
+ if (!va || !iova_size)
+ return;
+
+ switch (mtype) {
+ case MEM_EVENT_RING:
+ if (uaudio_qdev->er_mapped)
+ uaudio_qdev->er_mapped = false;
+ else
+ unmap = false;
+ break;
+
+ case MEM_XFER_RING:
+ uaudio_put_iova(va, iova_size, &uaudio_qdev->xfer_ring_list,
+ &uaudio_qdev->xfer_ring_iova_size);
+ break;
+ case MEM_XFER_BUF:
+ uaudio_put_iova(va, iova_size, &uaudio_qdev->xfer_buf_list,
+ &uaudio_qdev->xfer_buf_iova_size);
+ break;
+ default:
+ unmap = false;
+ }
+
+ if (!unmap || !mapped_iova_size)
+ return;
+
+ umap_size = iommu_unmap(uaudio_qdev->data->domain, va, mapped_iova_size);
+ if (umap_size != mapped_iova_size)
+ dev_err(uaudio_qdev->data->dev,
+ "unmapped size %zu for iova 0x%08lx of mapped size %zu\n",
+ umap_size, va, mapped_iova_size);
+}
+
+/**
+ * uaudio_iommu_map() - maps iommu memory for adsp
+ * @mtype: ring type
+ * @dma_coherent: dma coherent
+ * @pa: physical address for ring/buffer
+ * @size: size of memory region
+ * @sgt: sg table for memory region
+ *
+ * Maps the XHCI related resources to a memory region that is assigned to be
+ * used by the adsp. This will be mapped to the domain, which is created by
+ * the ASoC USB backend driver.
+ *
+ */
+static unsigned long uaudio_iommu_map(enum mem_type mtype, bool dma_coherent,
+ phys_addr_t pa, size_t size, struct sg_table *sgt)
+{
+ struct scatterlist *sg;
+ unsigned long va = 0;
+ size_t total_len = 0;
+ unsigned long va_sg;
+ phys_addr_t pa_sg;
+ bool map = true;
+ size_t sg_len;
+ int prot;
+ int ret;
+ int i;
+
+ prot = IOMMU_READ | IOMMU_WRITE;
+
+ if (dma_coherent)
+ prot |= IOMMU_CACHE;
+
+ switch (mtype) {
+ case MEM_EVENT_RING:
+ va = IOVA_BASE;
+ /* er already mapped */
+ if (uaudio_qdev->er_mapped)
+ map = false;
+ break;
+ case MEM_XFER_RING:
+ va = uaudio_get_iova(&uaudio_qdev->curr_xfer_ring_iova,
+ &uaudio_qdev->xfer_ring_iova_size, &uaudio_qdev->xfer_ring_list,
+ size);
+ break;
+ case MEM_XFER_BUF:
+ va = uaudio_get_iova(&uaudio_qdev->curr_xfer_buf_iova,
+ &uaudio_qdev->xfer_buf_iova_size, &uaudio_qdev->xfer_buf_list,
+ size);
+ break;
+ default:
+ dev_err(uaudio_qdev->data->dev, "unknown mem type %d\n", mtype);
+ }
+
+ if (!va || !map)
+ goto done;
+
+ if (!sgt)
+ goto skip_sgt_map;
+
+ va_sg = va;
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ sg_len = PAGE_ALIGN(sg->offset + sg->length);
+ pa_sg = page_to_phys(sg_page(sg));
+ ret = iommu_map(uaudio_qdev->data->domain, va_sg, pa_sg, sg_len,
+ prot, GFP_KERNEL);
+ if (ret) {
+ uaudio_iommu_unmap(MEM_XFER_BUF, va, size, total_len);
+ va = 0;
+ goto done;
+ }
+
+ va_sg += sg_len;
+ total_len += sg_len;
+ }
+
+ if (size != total_len) {
+ uaudio_iommu_unmap(MEM_XFER_BUF, va, size, total_len);
+ va = 0;
+ }
+ return va;
+
+skip_sgt_map:
+ iommu_map(uaudio_qdev->data->domain, va, pa, size, prot, GFP_KERNEL);
+
+done:
+ return va;
+}
+
+/* looks up alias, if any, for controller DT node and returns the index */
+static int usb_get_controller_id(struct usb_device *udev)
+{
+ if (udev->bus->sysdev && udev->bus->sysdev->of_node)
+ return of_alias_get_id(udev->bus->sysdev->of_node, "usb");
+
+ return -ENODEV;
+}
+
+/**
+ * uaudio_dev_intf_cleanup() - cleanup transfer resources
+ * @udev: usb device
+ * @info: usb offloading interface
+ *
+ * Cleans up the transfer ring related resources which are assigned per
+ * endpoint from XHCI. This is invoked when the USB endpoints are no
+ * longer in use by the adsp.
+ *
+ */
+static void uaudio_dev_intf_cleanup(struct usb_device *udev,
+ struct intf_info *info)
+{
+ uaudio_iommu_unmap(MEM_XFER_RING, info->data_xfer_ring_va,
+ info->data_xfer_ring_size, info->data_xfer_ring_size);
+ info->data_xfer_ring_va = 0;
+ info->data_xfer_ring_size = 0;
+
+ uaudio_iommu_unmap(MEM_XFER_RING, info->sync_xfer_ring_va,
+ info->sync_xfer_ring_size, info->sync_xfer_ring_size);
+ info->sync_xfer_ring_va = 0;
+ info->sync_xfer_ring_size = 0;
+
+ uaudio_iommu_unmap(MEM_XFER_BUF, info->xfer_buf_va,
+ info->xfer_buf_size, info->xfer_buf_size);
+ info->xfer_buf_va = 0;
+
+ usb_free_coherent(udev, info->xfer_buf_size,
+ info->xfer_buf, info->xfer_buf_pa);
+ info->xfer_buf_size = 0;
+ info->xfer_buf = NULL;
+ info->xfer_buf_pa = 0;
+
+ info->in_use = false;
+}
+
+/**
+ * uaudio_event_ring_cleanup_free() - cleanup secondary event ring
+ * @dev: usb offload device
+ *
+ * Cleans up the secondary event ring that was requested. This will
+ * occur when the adsp is no longer transferring data on the USB bus
+ * across all endpoints.
+ *
+ */
+static void uaudio_event_ring_cleanup_free(struct uaudio_dev *dev)
+{
+ clear_bit(dev->chip->card->number, &uaudio_qdev->card_slot);
+ /* all audio devices are disconnected */
+ if (!uaudio_qdev->card_slot) {
+ uaudio_iommu_unmap(MEM_EVENT_RING, IOVA_BASE, PAGE_SIZE,
+ PAGE_SIZE);
+ xhci_sideband_remove_interrupter(uadev[dev->chip->card->number].sb);
+ }
+}
+
+static void uaudio_dev_cleanup(struct uaudio_dev *dev)
+{
+ int if_idx;
+
+ if (!dev->udev)
+ return;
+
+ /* free xfer buffer and unmap xfer ring and buf per interface */
+ for (if_idx = 0; if_idx < dev->num_intf; if_idx++) {
+ if (!dev->info[if_idx].in_use)
+ continue;
+ uaudio_dev_intf_cleanup(dev->udev, &dev->info[if_idx]);
+ dev_dbg(uaudio_qdev->data->dev,
+ "release resources: intf# %d card# %d\n",
+ dev->info[if_idx].intf_num, dev->chip->card->number);
+ }
+
+ dev->num_intf = 0;
+
+ /* free interface info */
+ kfree(dev->info);
+ dev->info = NULL;
+ uaudio_event_ring_cleanup_free(dev);
+ dev->udev = NULL;
+}
+
+/**
+ * disable_audio_stream() - disable usb snd endpoints
+ * @subs: usb substream
+ *
+ * Closes the USB SND endpoints associated with the current audio stream
+ * used. This will decrement the USB SND endpoint opened reference count.
+ *
+ */
+static void disable_audio_stream(struct snd_usb_substream *subs)
+{
+ struct snd_usb_audio *chip = subs->stream->chip;
+
+ snd_usb_hw_free(subs);
+ snd_usb_autosuspend(chip);
+}
+
+/* QMI service disconnect handlers */
+static void qmi_stop_session(void)
+{
+ struct snd_usb_substream *subs;
+ struct usb_host_endpoint *ep;
+ struct snd_usb_audio *chip;
+ struct intf_info *info;
+ int pcm_card_num;
+ int if_idx;
+ int idx;
+
+ mutex_lock(&qdev_mutex);
+ /* find all active intf for set alt 0 and cleanup usb audio dev */
+ for (idx = 0; idx < SNDRV_CARDS; idx++) {
+ if (!atomic_read(&uadev[idx].in_use))
+ continue;
+
+ chip = uadev[idx].chip;
+ for (if_idx = 0; if_idx < uadev[idx].num_intf; if_idx++) {
+ if (!uadev[idx].info || !uadev[idx].info[if_idx].in_use)
+ continue;
+ info = &uadev[idx].info[if_idx];
+ pcm_card_num = info->pcm_card_num;
+ subs = find_substream(pcm_card_num,
+ info->pcm_dev_num,
+ info->direction);
+ if (!subs || !chip || atomic_read(&chip->shutdown)) {
+ dev_err(&subs->dev->dev,
+ "no sub for c#%u dev#%u dir%u\n",
+ info->pcm_card_num,
+ info->pcm_dev_num,
+ info->direction);
+ continue;
+ }
+ /* Release XHCI endpoints */
+ if (info->data_ep_pipe)
+ ep = usb_pipe_endpoint(uadev[pcm_card_num].udev,
+ info->data_ep_pipe);
+ xhci_sideband_remove_endpoint(uadev[pcm_card_num].sb, ep);
+
+ if (info->sync_ep_pipe)
+ ep = usb_pipe_endpoint(uadev[pcm_card_num].udev,
+ info->sync_ep_pipe);
+ xhci_sideband_remove_endpoint(uadev[pcm_card_num].sb, ep);
+
+ disable_audio_stream(subs);
+ }
+ atomic_set(&uadev[idx].in_use, 0);
+ mutex_lock(&chip->mutex);
+ uaudio_dev_cleanup(&uadev[idx]);
+ mutex_unlock(&chip->mutex);
+ }
+ mutex_unlock(&qdev_mutex);
+}
+
+/**
+ * qmi_bye_cb() - qmi bye message callback
+ * @handle: QMI handle
+ * @node: id of the dying node
+ *
+ * This callback is invoked when the QMI bye control message is received
+ * from the QMI client. Handle the message accordingly by ensuring that
+ * the USB offload path is disabled and cleaned up. At this point, ADSP
+ * is not utilizing the USB bus.
+ *
+ */
+static void qmi_bye_cb(struct qmi_handle *handle, unsigned int node)
+{
+ struct uaudio_qmi_svc *svc = uaudio_svc;
+
+ if (svc->uaudio_svc_hdl != handle)
+ return;
+
+ if (svc->client_connected && svc->client_sq.sq_node == node) {
+ qmi_stop_session();
+
+ /* clear QMI client parameters to block further QMI messages */
+ svc->client_sq.sq_node = 0;
+ svc->client_sq.sq_port = 0;
+ svc->client_sq.sq_family = 0;
+ svc->client_connected = false;
+ }
+}
+
+/**
+ * qmi_svc_disconnect_cb() - qmi client disconnected
+ * @handle: QMI handle
+ * @node: id of the dying node
+ * @port: port of the dying client
+ *
+ * Invoked when the remote QMI client is disconnected. Handle this event
+ * the same way as when the QMI bye message is received. This will ensure
+ * the USB offloading path is disabled and cleaned up.
+ *
+ */
+static void qmi_svc_disconnect_cb(struct qmi_handle *handle,
+ unsigned int node, unsigned int port)
+{
+ struct uaudio_qmi_svc *svc;
+
+ if (uaudio_svc == NULL)
+ return;
+
+ svc = uaudio_svc;
+ if (svc->uaudio_svc_hdl != handle)
+ return;
+
+ if (svc->client_connected && svc->client_sq.sq_node == node &&
+ svc->client_sq.sq_port == port) {
+ qmi_stop_session();
+
+ /* clear QMI client parameters to block further QMI messages */
+ svc->client_sq.sq_node = 0;
+ svc->client_sq.sq_port = 0;
+ svc->client_sq.sq_family = 0;
+ svc->client_connected = false;
+ }
+}
+
+/* QMI client callback handlers from QMI interface */
+static struct qmi_ops uaudio_svc_ops_options = {
+ .bye = qmi_bye_cb,
+ .del_client = qmi_svc_disconnect_cb,
+};
+
+/* kref release callback when all streams are disabled */
+static void uaudio_dev_release(struct kref *kref)
+{
+ struct uaudio_dev *dev = container_of(kref, struct uaudio_dev, kref);
+
+ uaudio_event_ring_cleanup_free(dev);
+ atomic_set(&dev->in_use, 0);
+ wake_up(&dev->disconnect_wq);
+}
+
+/**
+ * enable_audio_stream() - enable usb snd endpoints
+ * @subs: usb substream
+ * @pcm_format: pcm format requested
+ * @channels: number of channels
+ * @cur_rate: sample rate
+ * @datainterval: interval
+ *
+ * Opens all USB SND endpoints used for the data interface. This will increment
+ * the USB SND endpoint's opened count. Requests to keep the interface resumed
+ * until the audio stream is stopped. Will issue the USB set interface control
+ * message to enable the data interface.
+ *
+ */
+static int enable_audio_stream(struct snd_usb_substream *subs,
+ snd_pcm_format_t pcm_format,
+ unsigned int channels, unsigned int cur_rate,
+ int datainterval)
+{
+ struct snd_pcm_hw_params params;
+ struct snd_usb_audio *chip;
+ struct snd_interval *i;
+ struct snd_mask *m;
+ int ret;
+
+ chip = subs->stream->chip;
+
+ _snd_pcm_hw_params_any(¶ms);
+
+ m = hw_param_mask(¶ms, SNDRV_PCM_HW_PARAM_FORMAT);
+ snd_mask_leave(m, pcm_format);
+
+ i = hw_param_interval(¶ms, SNDRV_PCM_HW_PARAM_CHANNELS);
+ snd_interval_setinteger(i);
+ i->min = i->max = channels;
+
+ i = hw_param_interval(¶ms, SNDRV_PCM_HW_PARAM_RATE);
+ snd_interval_setinteger(i);
+ i->min = i->max = cur_rate;
+
+ pm_runtime_barrier(&chip->intf[0]->dev);
+ snd_usb_autoresume(chip);
+
+ ret = snd_usb_hw_params(subs, ¶ms);
+ if (ret < 0)
+ goto put_suspend;
+
+ if (!atomic_read(&chip->shutdown)) {
+ ret = snd_usb_lock_shutdown(chip);
+ if (ret < 0)
+ goto detach_ep;
+
+ if (subs->sync_endpoint) {
+ ret = snd_usb_endpoint_prepare(chip, subs->sync_endpoint);
+ if (ret < 0)
+ goto unlock;
+ }
+
+ ret = snd_usb_endpoint_prepare(chip, subs->data_endpoint);
+ if (ret < 0)
+ goto unlock;
+
+ snd_usb_unlock_shutdown(chip);
+
+ dev_dbg(uaudio_qdev->data->dev,
+ "selected %s iface:%d altsetting:%d datainterval:%dus\n",
+ subs->direction ? "capture" : "playback",
+ subs->cur_audiofmt->iface, subs->cur_audiofmt->altsetting,
+ (1 << subs->cur_audiofmt->datainterval) *
+ (subs->dev->speed >= USB_SPEED_HIGH ?
+ BUS_INTERVAL_HIGHSPEED_AND_ABOVE :
+ BUS_INTERVAL_FULL_SPEED));
+ }
+
+ return 0;
+
+unlock:
+ snd_usb_unlock_shutdown(chip);
+
+detach_ep:
+ snd_usb_hw_free(subs);
+
+put_suspend:
+ snd_usb_autosuspend(chip);
+
+ return ret;
+}
+
+/* returns usb hcd sysdev */
+static struct device *usb_get_usb_backend(struct usb_device *udev)
+{
+ if (udev->bus->sysdev && udev->bus->sysdev->of_node)
+ return udev->bus->sysdev;
+
+ return NULL;
+}
+
+/**
+ * uaudio_transfer_buffer_setup() - fetch and populate xfer buffer params
+ * @subs: usb substream
+ * @xfer_buf: xfer buf to be allocated
+ * @xfer_buf_len: size of allocation
+ * @mem_info: QMI response info
+ *
+ * Allocates and maps the transfer buffers that will be utilized by the
+ * audio DSP. Will populate the information in the QMI response that is
+ * sent back to the stream enable request.
+ *
+ */
+static int uaudio_transfer_buffer_setup(struct snd_usb_substream *subs,
+ u8 *xfer_buf, u32 xfer_buf_len,
+ struct mem_info_v01 *mem_info)
+{
+ struct sg_table xfer_buf_sgt;
+ phys_addr_t xfer_buf_pa;
+ u32 len = xfer_buf_len;
+ bool dma_coherent;
+ unsigned long va;
+ u32 remainder;
+ u32 mult;
+ int ret;
+
+ dma_coherent = dev_is_dma_coherent(subs->dev->bus->sysdev);
+
+ /* xfer buffer, multiple of 4K only */
+ if (!len)
+ len = PAGE_SIZE;
+
+ mult = len / PAGE_SIZE;
+ remainder = len % PAGE_SIZE;
+ len = mult * PAGE_SIZE;
+ len += remainder ? PAGE_SIZE : 0;
+
+ if (len > MAX_XFER_BUFF_LEN) {
+ dev_err(uaudio_qdev->data->dev,
+ "req buf len %d > max buf len %lu, setting %lu\n",
+ len, MAX_XFER_BUFF_LEN, MAX_XFER_BUFF_LEN);
+ len = MAX_XFER_BUFF_LEN;
+ }
+
+ xfer_buf = usb_alloc_coherent(subs->dev, len, GFP_KERNEL, &xfer_buf_pa);
+ if (!xfer_buf)
+ return -ENOMEM;
+
+ dma_get_sgtable(subs->dev->bus->sysdev, &xfer_buf_sgt, xfer_buf,
+ xfer_buf_pa, len);
+ va = uaudio_iommu_map(MEM_XFER_BUF, dma_coherent, xfer_buf_pa, len,
+ &xfer_buf_sgt);
+ if (!va) {
+ ret = -ENOMEM;
+ goto unmap_sync;
+ }
+
+ mem_info->pa = xfer_buf_pa;
+ mem_info->size = len;
+ mem_info->va = PREPEND_SID_TO_IOVA(va, uaudio_qdev->data->sid);
+ sg_free_table(&xfer_buf_sgt);
+
+ return 0;
+
+unmap_sync:
+ usb_free_coherent(subs->dev, len, xfer_buf, xfer_buf_pa);
+
+ return ret;
+}
+
+/**
+ * uaudio_endpoint_setup() - fetch and populate endpoint params
+ * @subs: usb substream
+ * @endpoint: usb endpoint to add
+ * @card_num: uadev index
+ * @mem_info: QMI response info
+ * @ep_desc: QMI ep desc response field
+ *
+ * Initialize the USB endpoint being used for a particular USB
+ * stream. Will request XHCI sideband to reserve the EP for
+ * offloading as well as populating the QMI response with the
+ * transfer ring parameters.
+ *
+ */
+static phys_addr_t uaudio_endpoint_setup(struct snd_usb_substream *subs,
+ struct snd_usb_endpoint *endpoint, int card_num,
+ struct mem_info_v01 *mem_info,
+ struct usb_endpoint_descriptor_v01 *ep_desc)
+{
+ struct usb_host_endpoint *ep;
+ phys_addr_t tr_pa = 0;
+ struct sg_table *sgt;
+ bool dma_coherent;
+ unsigned long va;
+ struct page *pg;
+ int ret;
+
+ dma_coherent = dev_is_dma_coherent(subs->dev->bus->sysdev);
+
+ ep = usb_pipe_endpoint(subs->dev, endpoint->pipe);
+ if (!ep) {
+ dev_err(uaudio_qdev->data->dev, "data ep # %d context is null\n",
+ subs->data_endpoint->ep_num);
+ goto exit;
+ }
+
+ memcpy(ep_desc, &ep->desc, sizeof(ep->desc));
+
+ ret = xhci_sideband_add_endpoint(uadev[card_num].sb, ep);
+ if (ret < 0) {
+ dev_err(&subs->dev->dev,
+ "failed to add data ep to sideband\n");
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ sgt = xhci_sideband_get_endpoint_buffer(uadev[card_num].sb, ep);
+ if (!sgt) {
+ dev_err(&subs->dev->dev,
+ "failed to get data ep ring address\n");
+ ret = -ENODEV;
+ goto remove_ep;
+ }
+
+ pg = sg_page(sgt->sgl);
+ tr_pa = page_to_phys(pg);
+ mem_info->pa = sg_dma_address(sgt->sgl);
+ sg_free_table(sgt);
+
+ /* data transfer ring */
+ va = uaudio_iommu_map(MEM_XFER_RING, dma_coherent, tr_pa,
+ PAGE_SIZE, NULL);
+ if (!va) {
+ ret = -ENOMEM;
+ goto clear_pa;
+ }
+
+ mem_info->va = PREPEND_SID_TO_IOVA(va, uaudio_qdev->data->sid);
+ mem_info->size = PAGE_SIZE;
+
+ return 0;
+
+clear_pa:
+ mem_info->pa = 0;
+remove_ep:
+ xhci_sideband_remove_endpoint(uadev[card_num].sb, ep);
+exit:
+ return ret;
+}
+
+/**
+ * uaudio_event_ring_setup() - fetch and populate event ring params
+ * @subs: usb substream
+ * @card_num: uadev index
+ * @mem_info: QMI response info
+ *
+ * Register secondary interrupter to XHCI and fetch the event buffer info
+ * and populate the information into the QMI response.
+ *
+ */
+static int uaudio_event_ring_setup(struct snd_usb_substream *subs,
+ int card_num, struct mem_info_v01 *mem_info)
+{
+ struct sg_table *sgt;
+ phys_addr_t er_pa;
+ bool dma_coherent;
+ unsigned long va;
+ struct page *pg;
+ int ret;
+
+ dma_coherent = dev_is_dma_coherent(subs->dev->bus->sysdev);
+ er_pa = 0;
+
+ /* event ring */
+ ret = xhci_sideband_create_interrupter(uadev[card_num].sb, 1,
+ uaudio_qdev->data->intr_num, false);
+ if (ret < 0) {
+ dev_err(&subs->dev->dev, "failed to fetch interrupter\n");
+ goto exit;
+ }
+
+ sgt = xhci_sideband_get_event_buffer(uadev[card_num].sb);
+ if (!sgt) {
+ dev_err(&subs->dev->dev,
+ "failed to get event ring address\n");
+ ret = -ENODEV;
+ goto remove_interrupter;
+ }
+
+ pg = sg_page(sgt->sgl);
+ er_pa = page_to_phys(pg);
+ mem_info->pa = sg_dma_address(sgt->sgl);
+ sg_free_table(sgt);
+
+ va = uaudio_iommu_map(MEM_EVENT_RING, dma_coherent, er_pa,
+ PAGE_SIZE, NULL);
+ if (!va) {
+ ret = -ENOMEM;
+ goto clear_pa;
+ }
+
+ mem_info->va = PREPEND_SID_TO_IOVA(va, uaudio_qdev->data->sid);
+ mem_info->size = PAGE_SIZE;
+
+ return 0;
+
+clear_pa:
+ mem_info->pa = 0;
+remove_interrupter:
+ xhci_sideband_remove_interrupter(uadev[card_num].sb);
+exit:
+ return ret;
+}
+
+/**
+ * uaudio_populate_uac_desc() - parse UAC parameters and populate QMI resp
+ * @subs: usb substream
+ * @resp: QMI response buffer
+ *
+ * Parses information specified within UAC descriptors which explain the
+ * sample parameters that the device expects. This information is populated
+ * to the QMI response sent back to the audio DSP.
+ *
+ */
+static int uaudio_populate_uac_desc(struct snd_usb_substream *subs,
+ struct qmi_uaudio_stream_resp_msg_v01 *resp)
+{
+ struct usb_interface_descriptor *altsd;
+ struct usb_host_interface *alts;
+ struct usb_interface *iface;
+ int protocol;
+
+ iface = usb_ifnum_to_if(subs->dev, subs->cur_audiofmt->iface);
+ if (!iface) {
+ dev_err(&subs->dev->dev, "interface # %d does not exist\n",
+ subs->cur_audiofmt->iface);
+ return -ENODEV;
+ }
+
+ alts = &iface->altsetting[subs->cur_audiofmt->altset_idx];
+ altsd = get_iface_desc(alts);
+ protocol = altsd->bInterfaceProtocol;
+
+ if (protocol == UAC_VERSION_1) {
+ struct uac1_as_header_descriptor *as;
+
+ as = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL,
+ UAC_AS_GENERAL);
+ if (!as) {
+ dev_err(&subs->dev->dev,
+ "%u:%d : no UAC_AS_GENERAL desc\n",
+ subs->cur_audiofmt->iface,
+ subs->cur_audiofmt->altset_idx);
+ return -ENODEV;
+ }
+
+ resp->data_path_delay = as->bDelay;
+ resp->data_path_delay_valid = 1;
+
+ resp->usb_audio_subslot_size = subs->cur_audiofmt->fmt_sz;
+ resp->usb_audio_subslot_size_valid = 1;
+
+ resp->usb_audio_spec_revision = le16_to_cpu(0x0100);
+ resp->usb_audio_spec_revision_valid = 1;
+ } else if (protocol == UAC_VERSION_2) {
+ resp->usb_audio_subslot_size = subs->cur_audiofmt->fmt_sz;
+ resp->usb_audio_subslot_size_valid = 1;
+
+ resp->usb_audio_spec_revision = le16_to_cpu(0x0200);
+ resp->usb_audio_spec_revision_valid = 1;
+ } else if (protocol == UAC_VERSION_3) {
+ if (iface->intf_assoc->bFunctionSubClass ==
+ UAC3_FUNCTION_SUBCLASS_FULL_ADC_3_0) {
+ dev_err(&subs->dev->dev,
+ "full adc is not supported\n");
+ return -EINVAL;
+ }
+
+ switch (le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize)) {
+ case UAC3_BADD_EP_MAXPSIZE_SYNC_MONO_16:
+ case UAC3_BADD_EP_MAXPSIZE_SYNC_STEREO_16:
+ case UAC3_BADD_EP_MAXPSIZE_ASYNC_MONO_16:
+ case UAC3_BADD_EP_MAXPSIZE_ASYNC_STEREO_16: {
+ resp->usb_audio_subslot_size = 0x2;
+ break;
+ }
+
+ case UAC3_BADD_EP_MAXPSIZE_SYNC_MONO_24:
+ case UAC3_BADD_EP_MAXPSIZE_SYNC_STEREO_24:
+ case UAC3_BADD_EP_MAXPSIZE_ASYNC_MONO_24:
+ case UAC3_BADD_EP_MAXPSIZE_ASYNC_STEREO_24: {
+ resp->usb_audio_subslot_size = 0x3;
+ break;
+ }
+
+ default:
+ dev_err(&subs->dev->dev,
+ "%d: %u: Invalid wMaxPacketSize\n",
+ subs->cur_audiofmt->iface,
+ subs->cur_audiofmt->altset_idx);
+ return -EINVAL;
+ }
+ resp->usb_audio_subslot_size_valid = 1;
+ } else {
+ dev_err(&subs->dev->dev, "unknown protocol version %x\n",
+ protocol);
+ return -ENODEV;
+ }
+
+ memcpy(&resp->std_as_opr_intf_desc, &alts->desc, sizeof(alts->desc));
+
+ return 0;
+}
+
+/**
+ * prepare_qmi_response() - prepare stream enable response
+ * @subs: usb substream
+ * @req_msg: QMI request message
+ * @resp: QMI response buffer
+ * @info_idx: usb interface array index
+ *
+ * Prepares the QMI response for a USB QMI stream enable request. Will parse
+ * out the parameters within the stream enable request, in order to match
+ * requested audio profile to the ones exposed by the USB device connected.
+ *
+ * In addition, will fetch the XHCI transfer resources needed for the handoff to
+ * happen. This includes, transfer ring and buffer addresses and secondary event
+ * ring address. These parameters will be communicated as part of the USB QMI
+ * stream enable response.
+ *
+ */
+static int prepare_qmi_response(struct snd_usb_substream *subs,
+ struct qmi_uaudio_stream_req_msg_v01 *req_msg,
+ struct qmi_uaudio_stream_resp_msg_v01 *resp, int info_idx)
+{
+ struct q6usb_offload *data;
+ u32 xfer_buf_len;
+ int pcm_dev_num;
+ int card_num;
+ u8 *xfer_buf;
+ int ret;
+
+ pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
+ xfer_buf_len = req_msg->xfer_buff_size;
+ card_num = uaudio_qdev->last_card_num;
+
+ if (!uadev[card_num].ctrl_intf) {
+ dev_err(&subs->dev->dev, "audio ctrl intf info not cached\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ ret = uaudio_populate_uac_desc(subs, resp);
+ if (ret < 0)
+ goto err;
+
+ resp->slot_id = subs->dev->slot_id;
+ resp->slot_id_valid = 1;
+
+ data = snd_soc_usb_find_priv_data(usb_get_usb_backend(subs->dev));
+ if (!data)
+ goto err;
+
+ uaudio_qdev->data = data;
+
+ resp->std_as_opr_intf_desc_valid = 1;
+ ret = uaudio_endpoint_setup(subs, subs->data_endpoint, card_num,
+ &resp->xhci_mem_info.tr_data,
+ &resp->std_as_data_ep_desc);
+ if (ret < 0)
+ goto err;
+
+ resp->std_as_data_ep_desc_valid = 1;
+
+ if (subs->sync_endpoint) {
+ ret = uaudio_endpoint_setup(subs, subs->sync_endpoint, card_num,
+ &resp->xhci_mem_info.tr_sync,
+ &resp->std_as_sync_ep_desc);
+ if (ret < 0)
+ goto drop_data_ep;
+
+ resp->std_as_sync_ep_desc_valid = 1;
+ }
+
+ resp->interrupter_num_valid = 1;
+ resp->controller_num_valid = 0;
+ ret = usb_get_controller_id(subs->dev);
+ if (ret >= 0) {
+ resp->controller_num = ret;
+ resp->controller_num_valid = 1;
+ }
+
+ /* event ring */
+ ret = uaudio_event_ring_setup(subs, card_num,
+ &resp->xhci_mem_info.evt_ring);
+ if (ret < 0)
+ goto drop_sync_ep;
+
+ uaudio_qdev->er_mapped = true;
+ resp->interrupter_num = xhci_sideband_interrupter_id(uadev[card_num].sb);
+
+ resp->speed_info = get_speed_info(subs->dev->speed);
+ if (resp->speed_info == USB_QMI_DEVICE_SPEED_INVALID_V01) {
+ ret = -ENODEV;
+ goto free_sec_ring;
+ }
+
+ resp->speed_info_valid = 1;
+
+ ret = uaudio_transfer_buffer_setup(subs, xfer_buf, req_msg->xfer_buff_size,
+ &resp->xhci_mem_info.xfer_buff);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto free_sec_ring;
+ }
+
+ resp->xhci_mem_info_valid = 1;
+
+ if (!atomic_read(&uadev[card_num].in_use)) {
+ kref_init(&uadev[card_num].kref);
+ init_waitqueue_head(&uadev[card_num].disconnect_wq);
+ uadev[card_num].num_intf =
+ subs->dev->config->desc.bNumInterfaces;
+ uadev[card_num].info = kcalloc(uadev[card_num].num_intf,
+ sizeof(struct intf_info), GFP_KERNEL);
+ if (!uadev[card_num].info) {
+ ret = -ENOMEM;
+ goto unmap_er;
+ }
+ uadev[card_num].udev = subs->dev;
+ atomic_set(&uadev[card_num].in_use, 1);
+ } else {
+ kref_get(&uadev[card_num].kref);
+ }
+
+ uadev[card_num].usb_core_id = resp->controller_num;
+
+ /* cache intf specific info to use it for unmap and free xfer buf */
+ uadev[card_num].info[info_idx].data_xfer_ring_va =
+ IOVA_MASK(resp->xhci_mem_info.tr_data.va);
+ uadev[card_num].info[info_idx].data_xfer_ring_size = PAGE_SIZE;
+ uadev[card_num].info[info_idx].sync_xfer_ring_va =
+ IOVA_MASK(resp->xhci_mem_info.tr_sync.va);
+ uadev[card_num].info[info_idx].sync_xfer_ring_size = PAGE_SIZE;
+ uadev[card_num].info[info_idx].xfer_buf_va =
+ IOVA_MASK(resp->xhci_mem_info.xfer_buff.va);
+ uadev[card_num].info[info_idx].xfer_buf_pa =
+ resp->xhci_mem_info.xfer_buff.pa;
+ uadev[card_num].info[info_idx].xfer_buf_size =
+ resp->xhci_mem_info.xfer_buff.size;
+ uadev[card_num].info[info_idx].data_ep_pipe = subs->data_endpoint ?
+ subs->data_endpoint->pipe : 0;
+ uadev[card_num].info[info_idx].sync_ep_pipe = subs->sync_endpoint ?
+ subs->sync_endpoint->pipe : 0;
+ uadev[card_num].info[info_idx].xfer_buf = xfer_buf;
+ uadev[card_num].info[info_idx].pcm_card_num = card_num;
+ uadev[card_num].info[info_idx].pcm_dev_num = pcm_dev_num;
+ uadev[card_num].info[info_idx].direction = subs->direction;
+ uadev[card_num].info[info_idx].intf_num = subs->cur_audiofmt->iface;
+ uadev[card_num].info[info_idx].in_use = true;
+
+ set_bit(card_num, &uaudio_qdev->card_slot);
+
+ return 0;
+
+unmap_er:
+ uaudio_iommu_unmap(MEM_EVENT_RING, IOVA_BASE, PAGE_SIZE, PAGE_SIZE);
+free_sec_ring:
+ xhci_sideband_remove_interrupter(uadev[card_num].sb);
+drop_sync_ep:
+ if (subs->sync_endpoint) {
+ uaudio_iommu_unmap(MEM_XFER_RING,
+ IOVA_MASK(resp->xhci_mem_info.tr_sync.va),
+ PAGE_SIZE, PAGE_SIZE);
+ xhci_sideband_remove_endpoint(uadev[card_num].sb,
+ usb_pipe_endpoint(subs->dev, subs->sync_endpoint->pipe));
+ }
+drop_data_ep:
+ uaudio_iommu_unmap(MEM_XFER_RING, IOVA_MASK(resp->xhci_mem_info.tr_data.va),
+ PAGE_SIZE, PAGE_SIZE);
+ xhci_sideband_remove_endpoint(uadev[card_num].sb,
+ usb_pipe_endpoint(subs->dev, subs->data_endpoint->pipe));
+
+err:
+ return ret;
+}
+
+/**
+ * handle_uaudio_stream_req() - handle stream enable/disable request
+ * @handle: QMI client handle
+ * @sq: qrtr socket
+ * @txn: QMI transaction context
+ * @decoded_msg: decoded QMI message
+ *
+ * Main handler for the QMI stream enable/disable requests. This executes the
+ * corresponding enable/disable stream apis, respectively.
+ *
+ */
+static void handle_uaudio_stream_req(struct qmi_handle *handle,
+ struct sockaddr_qrtr *sq,
+ struct qmi_txn *txn,
+ const void *decoded_msg)
+{
+ struct qmi_uaudio_stream_req_msg_v01 *req_msg;
+ struct qmi_uaudio_stream_resp_msg_v01 resp = {{0}, 0};
+ struct uaudio_qmi_svc *svc = uaudio_svc;
+ struct snd_usb_audio *chip = NULL;
+ struct snd_usb_substream *subs;
+ struct usb_host_endpoint *ep;
+ int datainterval = -EINVAL;
+ int info_idx = -EINVAL;
+ struct intf_info *info;
+ u8 pcm_card_num;
+ u8 pcm_dev_num;
+ u8 direction;
+ int ret = 0;
+
+ if (!svc->client_connected) {
+ svc->client_sq = *sq;
+ svc->client_connected = true;
+ }
+
+ mutex_lock(&qdev_mutex);
+ req_msg = (struct qmi_uaudio_stream_req_msg_v01 *)decoded_msg;
+ if (!req_msg->audio_format_valid || !req_msg->bit_rate_valid ||
+ !req_msg->number_of_ch_valid || !req_msg->xfer_buff_size_valid) {
+ ret = -EINVAL;
+ goto response;
+ }
+
+ if (!uaudio_qdev) {
+ ret = -EINVAL;
+ goto response;
+ }
+
+ direction = (req_msg->usb_token & QMI_STREAM_REQ_DIRECTION);
+ pcm_dev_num = (req_msg->usb_token & QMI_STREAM_REQ_DEV_NUM_MASK) >> 8;
+ pcm_card_num = req_msg->enable ? uaudio_qdev->last_card_num :
+ ffs(uaudio_qdev->card_slot) - 1;
+ if (pcm_card_num >= SNDRV_CARDS) {
+ ret = -EINVAL;
+ goto response;
+ }
+
+ if (req_msg->audio_format > USB_QMI_PCM_FORMAT_U32_BE) {
+ ret = -EINVAL;
+ goto response;
+ }
+
+ subs = find_substream(pcm_card_num, pcm_dev_num, direction);
+ chip = uadev[pcm_card_num].chip;
+ if (!subs || !chip || atomic_read(&chip->shutdown)) {
+ ret = -ENODEV;
+ goto response;
+ }
+
+ info_idx = info_idx_from_ifnum(pcm_card_num, subs->cur_audiofmt ?
+ subs->cur_audiofmt->iface : -1, req_msg->enable);
+ if (atomic_read(&chip->shutdown) || !subs->stream || !subs->stream->pcm
+ || !subs->stream->chip) {
+ ret = -ENODEV;
+ goto response;
+ }
+
+ if (req_msg->enable) {
+ if (info_idx < 0 || chip->system_suspend) {
+ ret = -EBUSY;
+ goto response;
+ }
+ }
+
+ if (req_msg->service_interval_valid) {
+ ret = get_data_interval_from_si(subs,
+ req_msg->service_interval);
+ if (ret == -EINVAL)
+ goto response;
+
+ datainterval = ret;
+ }
+
+ uadev[pcm_card_num].ctrl_intf = chip->ctrl_intf;
+
+ if (req_msg->enable) {
+ ret = enable_audio_stream(subs,
+ map_pcm_format(req_msg->audio_format),
+ req_msg->number_of_ch, req_msg->bit_rate,
+ datainterval);
+
+ if (!ret)
+ ret = prepare_qmi_response(subs, req_msg, &resp,
+ info_idx);
+ } else {
+ info = &uadev[pcm_card_num].info[info_idx];
+ if (info->data_ep_pipe) {
+ ep = usb_pipe_endpoint(uadev[pcm_card_num].udev,
+ info->data_ep_pipe);
+ if (ep)
+ xhci_sideband_stop_endpoint(uadev[pcm_card_num].sb,
+ ep);
+ xhci_sideband_remove_endpoint(uadev[pcm_card_num].sb, ep);
+ info->data_ep_pipe = 0;
+ }
+
+ if (info->sync_ep_pipe) {
+ ep = usb_pipe_endpoint(uadev[pcm_card_num].udev,
+ info->sync_ep_pipe);
+ if (ep)
+ xhci_sideband_stop_endpoint(uadev[pcm_card_num].sb,
+ ep);
+ xhci_sideband_remove_endpoint(uadev[pcm_card_num].sb, ep);
+ info->sync_ep_pipe = 0;
+ }
+
+ disable_audio_stream(subs);
+ }
+
+response:
+ if (!req_msg->enable && ret != -EINVAL && ret != -ENODEV) {
+ mutex_lock(&chip->mutex);
+ if (info_idx >= 0) {
+ info = &uadev[pcm_card_num].info[info_idx];
+ uaudio_dev_intf_cleanup(
+ uadev[pcm_card_num].udev,
+ info);
+ }
+ if (atomic_read(&uadev[pcm_card_num].in_use))
+ kref_put(&uadev[pcm_card_num].kref,
+ uaudio_dev_release);
+ mutex_unlock(&chip->mutex);
+ }
+ mutex_unlock(&qdev_mutex);
+
+ resp.usb_token = req_msg->usb_token;
+ resp.usb_token_valid = 1;
+ resp.internal_status = ret;
+ resp.internal_status_valid = 1;
+ resp.status = ret ? USB_QMI_STREAM_REQ_FAILURE_V01 : ret;
+ resp.status_valid = 1;
+ ret = qmi_send_response(svc->uaudio_svc_hdl, sq, txn,
+ QMI_UAUDIO_STREAM_RESP_V01,
+ QMI_UAUDIO_STREAM_RESP_MSG_V01_MAX_MSG_LEN,
+ qmi_uaudio_stream_resp_msg_v01_ei, &resp);
+}
+
+static struct qmi_msg_handler uaudio_stream_req_handlers = {
+ .type = QMI_REQUEST,
+ .msg_id = QMI_UAUDIO_STREAM_REQ_V01,
+ .ei = qmi_uaudio_stream_req_msg_v01_ei,
+ .decoded_size = QMI_UAUDIO_STREAM_REQ_MSG_V01_MAX_MSG_LEN,
+ .fn = handle_uaudio_stream_req,
+};
+
+/**
+ * qc_usb_audio_offload_init_qmi_dev() - initializes qmi dev
+ *
+ * Initializes the USB qdev, which is used to carry information pertaining to
+ * the offloading resources. This device is freed only when there are no longer
+ * any offloading candidates. (i.e, when all audio devices are disconnected)
+ *
+ */
+static int qc_usb_audio_offload_init_qmi_dev(struct usb_device *udev)
+{
+ uaudio_qdev = kzalloc(sizeof(struct uaudio_qmi_dev),
+ GFP_KERNEL);
+ if (!uaudio_qdev)
+ return -ENOMEM;
+
+ /* initialize xfer ring and xfer buf iova list */
+ INIT_LIST_HEAD(&uaudio_qdev->xfer_ring_list);
+ uaudio_qdev->curr_xfer_ring_iova = IOVA_XFER_RING_BASE;
+ uaudio_qdev->xfer_ring_iova_size =
+ IOVA_XFER_RING_MAX - IOVA_XFER_RING_BASE;
+
+ INIT_LIST_HEAD(&uaudio_qdev->xfer_buf_list);
+ uaudio_qdev->curr_xfer_buf_iova = IOVA_XFER_BUF_BASE;
+ uaudio_qdev->xfer_buf_iova_size =
+ IOVA_XFER_BUF_MAX - IOVA_XFER_BUF_BASE;
+
+ return 0;
+}
+
+/**
+ * qc_usb_audio_offload_probe() - platform op connect handler
+ * @chip: USB SND device
+ *
+ * Platform connect handler when a USB SND device is detected. Will
+ * notify SOC USB about the connection to enable the USB ASoC backend
+ * and populate internal USB chip array.
+ *
+ */
+static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
+{
+ struct usb_device *udev = chip->dev;
+ struct snd_soc_usb_device *sdev;
+ struct xhci_sideband *sb;
+
+ /*
+ * If there is no priv_data, the connected device is on a USB bus
+ * that doesn't support offloading. Avoid populating entries for
+ * this device.
+ */
+ if (!snd_soc_usb_find_priv_data(usb_get_usb_backend(udev)))
+ return;
+
+ mutex_lock(&qdev_mutex);
+ mutex_lock(&chip->mutex);
+ if (!uadev[chip->card->number].chip) {
+ sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+ if (!sdev)
+ goto exit;
+
+ sb = xhci_sideband_register(udev);
+ if (!sb)
+ goto free_sdev;
+ } else {
+ sb = uadev[chip->card->number].sb;
+ sdev = uadev[chip->card->number].sdev;
+ }
+
+ if (!uaudio_qdev)
+ qc_usb_audio_offload_init_qmi_dev(udev);
+
+ atomic_inc(&uaudio_qdev->qdev_in_use);
+
+ uadev[chip->card->number].sb = sb;
+ uadev[chip->card->number].chip = chip;
+
+ sdev->card_idx = chip->card->number;
+ sdev->chip_idx = chip->index;
+ uadev[chip->card->number].sdev = sdev;
+
+ uaudio_qdev->last_card_num = chip->card->number;
+ snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
+
+ mutex_unlock(&chip->mutex);
+ mutex_unlock(&qdev_mutex);
+
+ return;
+
+free_sdev:
+ kfree(sdev);
+exit:
+ mutex_unlock(&chip->mutex);
+ mutex_unlock(&qdev_mutex);
+}
+
+/**
+ * qc_usb_audio_cleanup_qmi_dev() - release qmi device
+ *
+ * Frees the USB qdev. Only occurs when there are no longer any potential
+ * devices that can utilize USB audio offloading.
+ *
+ */
+static void qc_usb_audio_cleanup_qmi_dev(void)
+{
+ kfree(uaudio_qdev);
+ uaudio_qdev = NULL;
+}
+
+/**
+ * qc_usb_audio_offload_disconnect() - platform op disconnect handler
+ * @chip: USB SND device
+ *
+ * Platform disconnect handler. Will ensure that any pending stream is
+ * halted by issuing a QMI disconnect indication packet to the adsp.
+ *
+ */
+static void qc_usb_audio_offload_disconnect(struct snd_usb_audio *chip)
+{
+ struct qmi_uaudio_stream_ind_msg_v01 disconnect_ind = {0};
+ struct uaudio_qmi_svc *svc = uaudio_svc;
+ struct uaudio_dev *dev;
+ int card_num;
+ int ret;
+
+ if (!chip)
+ return;
+
+ card_num = chip->card->number;
+ if (card_num >= SNDRV_CARDS)
+ return;
+
+ mutex_lock(&qdev_mutex);
+ mutex_lock(&chip->mutex);
+ dev = &uadev[card_num];
+
+ /* Device has already been cleaned up, or never populated */
+ if (!dev->chip) {
+ mutex_unlock(&qdev_mutex);
+ mutex_unlock(&chip->mutex);
+ return;
+ }
+
+ /* cleaned up already */
+ if (!dev->udev)
+ goto done;
+
+ if (atomic_read(&dev->in_use)) {
+ mutex_unlock(&chip->mutex);
+ mutex_unlock(&qdev_mutex);
+ dev_dbg(uaudio_qdev->data->dev,
+ "sending qmi indication disconnect\n");
+ disconnect_ind.dev_event = USB_QMI_DEV_DISCONNECT_V01;
+ disconnect_ind.slot_id = dev->udev->slot_id;
+ disconnect_ind.controller_num = dev->usb_core_id;
+ disconnect_ind.controller_num_valid = 1;
+ ret = qmi_send_indication(svc->uaudio_svc_hdl, &svc->client_sq,
+ QMI_UAUDIO_STREAM_IND_V01,
+ QMI_UAUDIO_STREAM_IND_MSG_V01_MAX_MSG_LEN,
+ qmi_uaudio_stream_ind_msg_v01_ei,
+ &disconnect_ind);
+ if (ret < 0)
+ dev_err(uaudio_qdev->data->dev,
+ "qmi send failed with err: %d\n", ret);
+
+ ret = wait_event_interruptible_timeout(dev->disconnect_wq,
+ !atomic_read(&dev->in_use),
+ msecs_to_jiffies(DEV_RELEASE_WAIT_TIMEOUT));
+ if (!ret) {
+ dev_err(uaudio_qdev->data->dev,
+ "timeout while waiting for dev_release\n");
+ atomic_set(&dev->in_use, 0);
+ } else if (ret < 0) {
+ dev_err(uaudio_qdev->data->dev,
+ "failed with ret %d\n", ret);
+ atomic_set(&dev->in_use, 0);
+ }
+ mutex_lock(&qdev_mutex);
+ mutex_lock(&chip->mutex);
+ }
+
+ uaudio_dev_cleanup(dev);
+done:
+ /*
+ * If num_interfaces == 1, the last USB SND interface is being removed.
+ * This is to accommodate for devices w/ multiple UAC functions.
+ */
+ if (chip->num_interfaces == 1) {
+ snd_soc_usb_disconnect(usb_get_usb_backend(chip->dev), dev->sdev);
+ xhci_sideband_unregister(dev->sb);
+ dev->chip = NULL;
+ kfree(dev->sdev);
+ dev->sdev = NULL;
+ }
+ mutex_unlock(&chip->mutex);
+
+ atomic_dec(&uaudio_qdev->qdev_in_use);
+ if (!atomic_read(&uaudio_qdev->qdev_in_use))
+ qc_usb_audio_cleanup_qmi_dev();
+
+ mutex_unlock(&qdev_mutex);
+}
+
+/**
+ * qc_usb_audio_offload_suspend() - USB offload PM suspend handler
+ * @intf: USB interface
+ * @message: suspend type
+ *
+ * PM suspend handler to ensure that the USB offloading driver is able to stop
+ * any pending traffic, so that the bus can be suspended.
+ *
+ */
+static void qc_usb_audio_offload_suspend(struct usb_interface *intf,
+ pm_message_t message)
+{
+ struct qmi_uaudio_stream_ind_msg_v01 disconnect_ind = {0};
+ struct snd_usb_audio *chip = usb_get_intfdata(intf);
+ struct uaudio_qmi_svc *svc = uaudio_svc;
+ struct uaudio_dev *dev;
+ int card_num;
+ int ret;
+
+ if (!chip)
+ return;
+
+ card_num = chip->card->number;
+ if (card_num >= SNDRV_CARDS)
+ return;
+
+
+ mutex_lock(&chip->mutex);
+ dev = &uadev[card_num];
+
+ if (atomic_read(&dev->in_use)) {
+ mutex_unlock(&chip->mutex);
+ dev_dbg(uaudio_qdev->data->dev, "sending qmi indication suspend\n");
+ disconnect_ind.dev_event = USB_QMI_DEV_DISCONNECT_V01;
+ disconnect_ind.slot_id = dev->udev->slot_id;
+ disconnect_ind.controller_num = dev->usb_core_id;
+ disconnect_ind.controller_num_valid = 1;
+ ret = qmi_send_indication(svc->uaudio_svc_hdl, &svc->client_sq,
+ QMI_UAUDIO_STREAM_IND_V01,
+ QMI_UAUDIO_STREAM_IND_MSG_V01_MAX_MSG_LEN,
+ qmi_uaudio_stream_ind_msg_v01_ei,
+ &disconnect_ind);
+ if (ret < 0)
+ dev_err(uaudio_qdev->data->dev,
+ "qmi send failed with err: %d\n", ret);
+
+ ret = wait_event_interruptible_timeout(dev->disconnect_wq,
+ !atomic_read(&dev->in_use),
+ msecs_to_jiffies(DEV_RELEASE_WAIT_TIMEOUT));
+ if (!ret) {
+ dev_err(uaudio_qdev->data->dev,
+ "timeout while waiting for dev_release\n");
+ atomic_set(&dev->in_use, 0);
+ } else if (ret < 0) {
+ dev_err(uaudio_qdev->data->dev,
+ "failed with ret %d\n", ret);
+ atomic_set(&dev->in_use, 0);
+ }
+ mutex_lock(&chip->mutex);
+ }
+ mutex_unlock(&chip->mutex);
+}
+
+static struct snd_usb_platform_ops offload_ops = {
+ .connect_cb = qc_usb_audio_offload_probe,
+ .disconnect_cb = qc_usb_audio_offload_disconnect,
+ .suspend_cb = qc_usb_audio_offload_suspend,
+};
+
+static int __init qc_usb_audio_offload_init(void)
+{
+ struct uaudio_qmi_svc *svc;
+ int ret;
+
+ svc = kzalloc(sizeof(struct uaudio_qmi_svc), GFP_KERNEL);
+ if (!svc)
+ return -ENOMEM;
+
+ svc->uaudio_svc_hdl = kzalloc(sizeof(struct qmi_handle), GFP_KERNEL);
+ if (!svc->uaudio_svc_hdl) {
+ ret = -ENOMEM;
+ goto free_svc;
+ }
+
+ ret = qmi_handle_init(svc->uaudio_svc_hdl,
+ QMI_UAUDIO_STREAM_REQ_MSG_V01_MAX_MSG_LEN,
+ &uaudio_svc_ops_options,
+ &uaudio_stream_req_handlers);
+ ret = qmi_add_server(svc->uaudio_svc_hdl, UAUDIO_STREAM_SERVICE_ID_V01,
+ UAUDIO_STREAM_SERVICE_VERS_V01, 0);
+
+ uaudio_svc = svc;
+
+ ret = snd_usb_register_platform_ops(&offload_ops);
+ if (ret < 0)
+ goto release_qmi;
+
+ return 0;
+
+release_qmi:
+ qmi_handle_release(svc->uaudio_svc_hdl);
+free_svc:
+ kfree(svc);
+
+ return ret;
+}
+
+static void __exit qc_usb_audio_offload_exit(void)
+{
+ struct uaudio_qmi_svc *svc = uaudio_svc;
+ int idx;
+
+ /*
+ * Remove all connected devices after unregistering ops, to ensure
+ * that no further connect events will occur. The disconnect routine
+ * will issue the QMI disconnect indication, which results in the
+ * external DSP to stop issuing transfers.
+ */
+ snd_usb_unregister_platform_ops();
+ for (idx = 0; idx < SNDRV_CARDS; idx++)
+ qc_usb_audio_offload_disconnect(uadev[idx].chip);
+
+ qmi_handle_release(svc->uaudio_svc_hdl);
+ kfree(svc);
+ uaudio_svc = NULL;
+}
+
+module_init(qc_usb_audio_offload_init);
+module_exit(qc_usb_audio_offload_exit);
+
+MODULE_DESCRIPTION("QC USB Audio Offloading");
+MODULE_LICENSE("GPL");
In case the USB backend device has not been initialized/probed, USB SND
device connections can still occur. When the USB backend is eventually
made available, previous USB SND device connections are not communicated to
the USB backend. Call snd_usb_rediscover_devices() to generate the connect
callbacks for all USB SND devices connected. This will allow for the USB
backend to be updated with the current set of devices available.
The chip array entries are all populated and removed while under the
register_mutex, so going over potential race conditions:
Thread#1:
q6usb_component_probe()
--> snd_soc_usb_add_port()
--> snd_usb_rediscover_devices()
--> mutex_lock(register_mutex)
Thread#2
--> usb_audio_disconnect()
--> mutex_lock(register_mutex)
So either thread#1 or thread#2 will complete first. If
Thread#1 completes before thread#2:
SOC USB will notify DPCM backend of the device connection. Shortly
after, once thread#2 runs, we will get a disconnect event for the
connected device.
Thread#2 completes before thread#1:
Then during snd_usb_rediscover_devices() it won't notify of any
connection for that particular chip index.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/soc/soc-usb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/soc-usb.c b/sound/soc/soc-usb.c
index 53c4e399909e..821caff2061d 100644
--- a/sound/soc/soc-usb.c
+++ b/sound/soc/soc-usb.c
@@ -554,6 +554,8 @@ int snd_soc_usb_add_port(struct snd_soc_usb *usb)
list_add_tail(&usb->list, &usb_ctx_list);
mutex_unlock(&ctx_mutex);
+ snd_usb_rediscover_devices();
+
return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_usb_add_port);
Some platforms may want to limit the number of XHCI interrupters allocated.
This is passed to xhci-plat as a device property. Ensure that this is read
and the max_interrupters field is set.
Signed-off-by: Wesley Cheng <[email protected]>
---
drivers/usb/host/xhci-plat.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 3d071b875308..1c12cadc02a1 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -258,6 +258,8 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s
device_property_read_u32(tmpdev, "imod-interval-ns",
&xhci->imod_interval);
+ device_property_read_u16(tmpdev, "num-hc-interrupters",
+ &xhci->max_interrupters);
}
/*
Some platforms may have support for offloading USB audio devices to a
dedicated audio DSP. Introduce a set of APIs that allow for management of
USB sound card and PCM devices enumerated by the USB SND class driver.
This allows for the ASoC components to be aware of what USB devices are
available for offloading.
Signed-off-by: Wesley Cheng <[email protected]>
---
include/sound/soc-usb.h | 95 ++++++++++++++++
sound/soc/Kconfig | 10 ++
sound/soc/Makefile | 2 +
sound/soc/soc-usb.c | 239 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 346 insertions(+)
create mode 100644 include/sound/soc-usb.h
create mode 100644 sound/soc/soc-usb.c
diff --git a/include/sound/soc-usb.h b/include/sound/soc-usb.h
new file mode 100644
index 000000000000..5b2fa0877523
--- /dev/null
+++ b/include/sound/soc-usb.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef __LINUX_SND_SOC_USB_H
+#define __LINUX_SND_SOC_USB_H
+
+/**
+ * struct snd_soc_usb_device
+ * @card_idx - sound card index associated with USB device
+ * @chip_idx - USB sound chip array index
+ * @num_playback - number of playback streams
+ * @num_capture - number of capture streams
+ **/
+struct snd_soc_usb_device {
+ int card_idx;
+ int chip_idx;
+ int num_playback;
+ int num_capture;
+};
+
+/**
+ * struct snd_soc_usb
+ * @list - list head for SND SOC struct list
+ * @component - reference to ASoC component
+ * @num_supported_streams - number of supported concurrent sessions
+ * @connection_status_cb - callback to notify connection events
+ * @priv_data - driver data
+ **/
+struct snd_soc_usb {
+ struct list_head list;
+ struct snd_soc_component *component;
+ unsigned int num_supported_streams;
+ int (*connection_status_cb)(struct snd_soc_usb *usb,
+ struct snd_soc_usb_device *sdev, bool connected);
+ void *priv_data;
+};
+
+#if IS_ENABLED(CONFIG_SND_SOC_USB)
+const char *snd_soc_usb_get_components_tag(bool playback);
+
+int snd_soc_usb_connect(struct device *usbdev, struct snd_soc_usb_device *sdev);
+int snd_soc_usb_disconnect(struct device *usbdev, struct snd_soc_usb_device *sdev);
+void *snd_soc_usb_find_priv_data(struct device *dev);
+
+struct snd_soc_usb *snd_soc_usb_allocate_port(struct snd_soc_component *component,
+ int num_streams, void *data);
+void snd_soc_usb_free_port(struct snd_soc_usb *usb);
+int snd_soc_usb_add_port(struct snd_soc_usb *usb);
+int snd_soc_usb_remove_port(struct snd_soc_usb *usb);
+#else
+static inline const char *snd_soc_usb_get_components_tag(bool playback)
+{
+ return "";
+}
+
+static inline int snd_soc_usb_connect(struct device *usbdev,
+ struct snd_soc_usb_device *sdev)
+{
+ return -ENODEV;
+}
+
+static inline int snd_soc_usb_disconnect(struct device *usbdev,
+ struct snd_soc_usb_device *sdev)
+{
+ return -EINVAL;
+}
+
+static inline void *snd_soc_usb_find_priv_data(struct device *dev)
+{
+ return NULL;
+}
+
+static inline struct snd_soc_usb *snd_soc_usb_allocate_port(
+ struct snd_soc_component *component,
+ int num_streams, void *data)
+{
+ return ERR_PTR(-ENOMEM);
+}
+
+static inline void snd_soc_usb_free_port(struct snd_soc_usb *usb)
+{ }
+
+static inline int snd_soc_usb_add_port(struct snd_soc_usb *usb)
+{
+ return -EINVAL;
+}
+
+static inline int snd_soc_usb_remove_port(struct snd_soc_usb *usb)
+{
+ return -ENODEV;
+}
+#endif /* IS_ENABLED(CONFIG_SND_SOC_USB) */
+#endif /*__LINUX_SND_SOC_USB_H */
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 439fa631c342..848493a46831 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -76,6 +76,16 @@ config SND_SOC_UTILS_KUNIT_TEST
config SND_SOC_ACPI
tristate
+config SND_SOC_USB
+ tristate "SoC based USB audio offloading"
+ depends on SND_USB_AUDIO
+ help
+ Enable this option if an ASoC platform card has support to handle
+ USB audio offloading. This enables the SoC USB layer, which will
+ notifies the ASoC USB DPCM backend DAI link about available USB audio
+ devices. Based on the notifications, sequences to enable the audio
+ stream can be taken based on the design.
+
# All the supported SoCs
source "sound/soc/adi/Kconfig"
source "sound/soc/amd/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 8376fdb217ed..4c3d8b720d22 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -31,6 +31,8 @@ endif
obj-$(CONFIG_SND_SOC_ACPI) += snd-soc-acpi.o
+obj-$(CONFIG_SND_SOC_USB) += soc-usb.o
+
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
obj-$(CONFIG_SND_SOC) += codecs/
obj-$(CONFIG_SND_SOC) += generic/
diff --git a/sound/soc/soc-usb.c b/sound/soc/soc-usb.c
new file mode 100644
index 000000000000..d21db2345966
--- /dev/null
+++ b/sound/soc/soc-usb.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#include <linux/of.h>
+#include <linux/usb.h>
+#include <sound/soc.h>
+#include <sound/soc-usb.h>
+#include "../usb/card.h"
+
+static DEFINE_MUTEX(ctx_mutex);
+static LIST_HEAD(usb_ctx_list);
+
+static struct device_node *snd_soc_find_phandle(struct device *dev)
+{
+ struct device_node *node;
+
+ node = of_parse_phandle(dev->of_node, "usb-soc-be", 0);
+ if (!node)
+ return ERR_PTR(-ENODEV);
+
+ return node;
+}
+
+static struct snd_soc_usb *snd_soc_find_usb_ctx(struct device_node *node)
+{
+ struct snd_soc_usb *ctx;
+
+ mutex_lock(&ctx_mutex);
+ list_for_each_entry(ctx, &usb_ctx_list, list) {
+ if (ctx->component->dev->of_node == node) {
+ mutex_unlock(&ctx_mutex);
+ return ctx;
+ }
+ }
+ mutex_unlock(&ctx_mutex);
+
+ return NULL;
+}
+
+/**
+ * snd_soc_usb_get_components_tag() - Retrieve SOC USB component tag
+ * @playback: direction of audio stream
+ *
+ * Returns the USB offload component tag used in the ASoC components
+ * string.
+ *
+ */
+const char *snd_soc_usb_get_components_tag(bool playback)
+{
+ if (playback)
+ return "usbplybkoffld: 1";
+ else
+ return "usbcapoffld: 1";
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_get_components_tag);
+
+/**
+ * snd_soc_usb_find_priv_data() - Retrieve private data stored
+ * @dev: device reference
+ *
+ * Fetch the private data stored in the USB SND SOC structure.
+ *
+ */
+void *snd_soc_usb_find_priv_data(struct device *dev)
+{
+ struct snd_soc_usb *ctx;
+ struct device_node *node;
+
+ node = snd_soc_find_phandle(dev);
+ if (!IS_ERR(node)) {
+ ctx = snd_soc_find_usb_ctx(node);
+ of_node_put(node);
+ } else {
+ /* Check if backend device */
+ ctx = snd_soc_find_usb_ctx(dev->of_node);
+ }
+
+ return ctx ? ctx->priv_data : NULL;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_find_priv_data);
+
+/**
+ * snd_soc_usb_allocate_port() - allocate a SOC USB device
+ * @component: USB DPCM backend DAI component
+ * @num_streams: number of offloading sessions supported
+ * @data: private data
+ *
+ * Allocate and initialize a SOC USB device. This will populate parameters that
+ * are used in subsequent sequences.
+ *
+ */
+struct snd_soc_usb *snd_soc_usb_allocate_port(struct snd_soc_component *component,
+ int num_streams, void *data)
+{
+ struct snd_soc_usb *usb;
+
+ usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+ if (!usb)
+ return ERR_PTR(-ENOMEM);
+
+ usb->component = component;
+ usb->priv_data = data;
+ usb->num_supported_streams = num_streams;
+
+ return usb;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_allocate_port);
+
+/**
+ * snd_soc_usb_free_port() - free a SOC USB device
+ * @usb: allocated SOC USB device
+
+ * Free and remove the SOC USB device from the available list of devices.
+ *
+ */
+void snd_soc_usb_free_port(struct snd_soc_usb *usb)
+{
+ snd_soc_usb_remove_port(usb);
+ kfree(usb);
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_free_port);
+
+/**
+ * snd_soc_usb_add_port() - Add a USB backend port
+ * @dev: USB backend device
+ * @priv: private data
+ * @connection_cb: connection status callback
+ *
+ * Register a USB backend device to the SND USB SOC framework. Memory is
+ * allocated as part of the USB backend device.
+ *
+ */
+int snd_soc_usb_add_port(struct snd_soc_usb *usb)
+{
+ mutex_lock(&ctx_mutex);
+ list_add_tail(&usb->list, &usb_ctx_list);
+ mutex_unlock(&ctx_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_add_port);
+
+/**
+ * snd_soc_usb_remove_port() - Remove a USB backend port
+ * @dev: USB backend device
+ *
+ * Remove a USB backend device from USB SND SOC. Memory is freed when USB
+ * backend is removed.
+ *
+ */
+int snd_soc_usb_remove_port(struct snd_soc_usb *usb)
+{
+ struct snd_soc_usb *ctx, *tmp;
+
+ mutex_lock(&ctx_mutex);
+ list_for_each_entry_safe(ctx, tmp, &usb_ctx_list, list) {
+ if (ctx == usb) {
+ list_del(&ctx->list);
+ break;
+ }
+ }
+ mutex_unlock(&ctx_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_remove_port);
+
+/**
+ * snd_soc_usb_connect() - Notification of USB device connection
+ * @usbdev: USB bus device
+ * @card_idx: USB SND card instance
+ *
+ * Notify of a new USB SND device connection. The card_idx can be used to
+ * handle how the DPCM backend selects, which device to enable USB offloading
+ * on.
+ *
+ */
+int snd_soc_usb_connect(struct device *usbdev, struct snd_soc_usb_device *sdev)
+{
+ struct snd_soc_usb *ctx;
+ struct device_node *node;
+
+ if (!usbdev)
+ return -ENODEV;
+
+ node = snd_soc_find_phandle(usbdev);
+ if (IS_ERR(node))
+ return -ENODEV;
+
+ ctx = snd_soc_find_usb_ctx(node);
+ of_node_put(node);
+ if (!ctx)
+ return -ENODEV;
+
+ mutex_lock(&ctx_mutex);
+ if (ctx->connection_status_cb)
+ ctx->connection_status_cb(ctx, sdev, true);
+ mutex_unlock(&ctx_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_connect);
+
+/**
+ * snd_soc_usb_disconnect() - Notification of USB device disconnection
+ * @usbdev: USB bus device
+ *
+ * Notify of a new USB SND device disconnection to the USB backend.
+ *
+ */
+int snd_soc_usb_disconnect(struct device *usbdev, struct snd_soc_usb_device *sdev)
+{
+ struct snd_soc_usb *ctx;
+ struct device_node *node;
+
+ if (!usbdev)
+ return -ENODEV;
+
+ node = snd_soc_find_phandle(usbdev);
+ if (IS_ERR(node))
+ return -ENODEV;
+
+ ctx = snd_soc_find_usb_ctx(node);
+ of_node_put(node);
+ if (!ctx)
+ return -ENODEV;
+
+ mutex_lock(&ctx_mutex);
+ if (ctx->connection_status_cb)
+ ctx->connection_status_cb(ctx, sdev, false);
+ mutex_unlock(&ctx_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_disconnect);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SoC USB driver for offloading");
Add proper checks and updates to the USB substream once receiving a USB QMI
stream enable request. If the substream is already in use from the non
offload path, reject the stream enable request. In addition, update the
USB substream opened parameter when enabling the offload path, so the
non offload path can be blocked.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/qcom/qc_audio_offload.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index 3b7780cb288a..db68c6c605eb 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -1460,12 +1460,17 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
goto response;
}
+ mutex_lock(&chip->mutex);
if (req_msg->enable) {
- if (info_idx < 0 || chip->system_suspend) {
+ if (info_idx < 0 || chip->system_suspend || subs->opened) {
ret = -EBUSY;
+ mutex_unlock(&chip->mutex);
+
goto response;
}
+ subs->opened = 1;
}
+ mutex_unlock(&chip->mutex);
if (req_msg->service_interval_valid) {
ret = get_data_interval_from_si(subs,
@@ -1487,6 +1492,11 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
if (!ret)
ret = prepare_qmi_response(subs, req_msg, &resp,
info_idx);
+ if (ret < 0) {
+ mutex_lock(&chip->mutex);
+ subs->opened = 0;
+ mutex_unlock(&chip->mutex);
+ }
} else {
info = &uadev[pcm_card_num].info[info_idx];
if (info->data_ep_pipe) {
@@ -1510,6 +1520,9 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
}
disable_audio_stream(subs);
+ mutex_lock(&chip->mutex);
+ subs->opened = 0;
+ mutex_unlock(&chip->mutex);
}
response:
Check for if the PCM format is supported during the hw_params callback. If
the profile is not supported then the userspace ALSA entity will receive an
error, and can take further action.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/soc/qcom/qdsp6/q6usb.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
index 00cba1021dc6..833a57deb321 100644
--- a/sound/soc/qcom/qdsp6/q6usb.c
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -46,7 +46,11 @@ static int q6usb_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- return 0;
+ struct q6usb_port_data *data = dev_get_drvdata(dai->dev);
+ int direction = substream->stream;
+
+ return snd_soc_usb_find_format(data->active_usb_chip_idx, params,
+ direction);
}
static const struct snd_soc_dai_ops q6usb_ops = {
Allow for the DWC3 host driver to pass along XHCI property that defines
how many interrupters to allocate. This is in relation for the number of
event rings that can be potentially used by other processors within the
system.
Acked-by: Thinh Nguyen <[email protected]>
Signed-off-by: Wesley Cheng <[email protected]>
---
drivers/usb/dwc3/core.c | 12 ++++++++++++
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/host.c | 3 +++
3 files changed, 17 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 637194af506f..5e31946a1831 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1488,6 +1488,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
u8 tx_thr_num_pkt_prd = 0;
u8 tx_max_burst_prd = 0;
u8 tx_fifo_resize_max_num;
+ u16 num_hc_interrupters;
const char *usb_psy_name;
int ret;
@@ -1510,6 +1511,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
*/
tx_fifo_resize_max_num = 6;
+ /* default to a single XHCI interrupter */
+ num_hc_interrupters = 1;
+
dwc->maximum_speed = usb_get_maximum_speed(dev);
dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
dwc->dr_mode = usb_get_dr_mode(dev);
@@ -1563,6 +1567,12 @@ static void dwc3_get_properties(struct dwc3 *dwc)
&tx_thr_num_pkt_prd);
device_property_read_u8(dev, "snps,tx-max-burst-prd",
&tx_max_burst_prd);
+ device_property_read_u16(dev, "num-hc-interrupters",
+ &num_hc_interrupters);
+ /* DWC3 core allowed to have a max of 8 interrupters */
+ if (num_hc_interrupters > 8)
+ num_hc_interrupters = 8;
+
dwc->do_fifo_resize = device_property_read_bool(dev,
"tx-fifo-resize");
if (dwc->do_fifo_resize)
@@ -1651,6 +1661,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->imod_interval = 0;
dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num;
+
+ dwc->num_hc_interrupters = num_hc_interrupters;
}
/* check whether the core supports IMOD */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 7e80dd3d466b..57c2735925c4 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1068,6 +1068,7 @@ struct dwc3_scratchpad_array {
* @tx_max_burst_prd: max periodic ESS transmit burst size
* @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize
* @clear_stall_protocol: endpoint number that requires a delayed status phase
+ * @num_hc_interrupters: number of host controller interrupters
* @hsphy_interface: "utmi" or "ulpi"
* @connected: true when we're connected to a host, false otherwise
* @softconnect: true when gadget connect is called, false when disconnect runs
@@ -1306,6 +1307,7 @@ struct dwc3 {
u8 tx_max_burst_prd;
u8 tx_fifo_resize_max_num;
u8 clear_stall_protocol;
+ u16 num_hc_interrupters;
const char *hsphy_interface;
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 0204787df81d..f774b843aabb 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -159,6 +159,9 @@ int dwc3_host_init(struct dwc3 *dwc)
if (DWC3_VER_IS_WITHIN(DWC3, ANY, 300A))
props[prop_idx++] = PROPERTY_ENTRY_BOOL("quirk-broken-port-ped");
+ props[prop_idx++] = PROPERTY_ENTRY_U16("num-hc-interrupters",
+ dwc->num_hc_interrupters);
+
if (prop_idx) {
ret = device_create_managed_software_node(&xhci->dev, props, NULL);
if (ret) {
Register PCM callbacks so that the Q6USB DPCM backend dai link can track
and update the status of the PCM device. Utilize the SOC USB state APIs to
ensure that the SND kcontrol for the offload status is updated properly.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/soc/qcom/qdsp6/q6usb.c | 52 +++++++++++++++++++++++++++++++++---
1 file changed, 49 insertions(+), 3 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
index 72ec7d45f916..32971395ab13 100644
--- a/sound/soc/qcom/qdsp6/q6usb.c
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -30,6 +30,9 @@
struct q6usb_status {
struct snd_soc_usb_device *sdev;
unsigned int pcm_index;
+ bool prepared;
+ bool running;
+ int session_id;
};
struct q6usb_port_data {
@@ -81,14 +84,48 @@ static int q6usb_hw_params(struct snd_pcm_substream *substream,
goto out;
data->status[data->sel_card_idx].pcm_index = data->sel_pcm_idx;
+ data->status[data->sel_card_idx].prepared = true;
+ data->status[data->sel_card_idx].session_id =
+ snd_soc_usb_prepare_session(data->usb, data->sel_card_idx,
+ data->sel_pcm_idx);
out:
mutex_unlock(&data->mutex);
return ret;
}
+static int q6usb_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct q6usb_port_data *data = dev_get_drvdata(dai->dev);
+
+ mutex_lock(&data->mutex);
+ data->status[data->sel_card_idx].running = true;
+ snd_soc_usb_set_session_state(data->usb,
+ data->status[data->sel_card_idx].session_id,
+ SND_SOC_USB_RUNNING);
+ mutex_unlock(&data->mutex);
+
+ return 0;
+}
+
+static void q6usb_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct q6usb_port_data *data = dev_get_drvdata(dai->dev);
+
+ mutex_lock(&data->mutex);
+ data->status[data->sel_card_idx].running = false;
+ data->status[data->sel_card_idx].prepared = false;
+ snd_soc_usb_shutdown_session(data->usb,
+ data->status[data->sel_card_idx].session_id);
+ mutex_unlock(&data->mutex);
+}
+
static const struct snd_soc_dai_ops q6usb_ops = {
.hw_params = q6usb_hw_params,
+ .prepare = q6usb_prepare,
+ .shutdown = q6usb_shutdown,
};
static struct snd_soc_dai_driver q6usb_be_dais[] = {
@@ -149,9 +186,14 @@ static int q6usb_put_offload_dev(struct snd_kcontrol *kcontrol,
int changed = 0;
int idx;
+ mutex_lock(&data->mutex);
+
+ /* Don't allow changes to the offloading devices if session is busy */
+ if (data->sel_card_idx >= 0 && data->status[data->sel_card_idx].prepared)
+ goto out;
+
idx = ucontrol->value.integer.value[0];
- mutex_lock(&data->mutex);
switch (type) {
case SND_SOC_USB_KCTL_CARD_ROUTE:
if (idx >= 0 && test_bit(idx, &data->available_card_slot)) {
@@ -210,8 +252,12 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
mutex_lock(&data->mutex);
if (connected) {
- /* We only track the latest USB headset plugged in */
- if (!data->idx_valid) {
+ /*
+ * Update the latest USB headset plugged in, if session is
+ * idle.
+ */
+ if (!data->idx_valid &&
+ !data->status[data->sel_card_idx].prepared) {
data->sel_card_idx = sdev->card_idx;
data->sel_pcm_idx = 0;
}
Allow for different platforms to be notified on USB SND connect/disconnect
seqeunces. This allows for platform USB SND modules to properly initialize
and populate internal structures with references to the USB SND chip
device.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/card.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++
sound/usb/card.h | 9 ++++++++
2 files changed, 62 insertions(+)
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 1b2edc0fd2e9..ca4f3bc1b42d 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -118,6 +118,42 @@ MODULE_PARM_DESC(skip_validation, "Skip unit descriptor validation (default: no)
static DEFINE_MUTEX(register_mutex);
static struct snd_usb_audio *usb_chip[SNDRV_CARDS];
static struct usb_driver usb_audio_driver;
+static struct snd_usb_platform_ops *platform_ops;
+
+/*
+ * Register platform specific operations that will be notified on events
+ * which occur in USB SND. The platform driver can utilize this path to
+ * enable features, such as USB audio offloading, which allows for audio data
+ * to be queued by an audio DSP.
+ *
+ * Only one set of platform operations can be registered to USB SND. The
+ * platform register operation is protected by the register_mutex.
+ */
+int snd_usb_register_platform_ops(struct snd_usb_platform_ops *ops)
+{
+ guard(mutex)(®ister_mutex);
+ if (platform_ops)
+ return -EEXIST;
+
+ platform_ops = ops;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_usb_register_platform_ops);
+
+/*
+ * Unregisters the current set of platform operations. This allows for
+ * a new set to be registered if required.
+ *
+ * The platform unregister operation is protected by the register_mutex.
+ */
+int snd_usb_unregister_platform_ops(void)
+{
+ guard(mutex)(®ister_mutex);
+ platform_ops = NULL;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_usb_unregister_platform_ops);
/*
* disconnect streams
@@ -910,7 +946,11 @@ static int usb_audio_probe(struct usb_interface *intf,
chip->num_interfaces++;
usb_set_intfdata(intf, chip);
atomic_dec(&chip->active);
+
+ if (platform_ops && platform_ops->connect_cb)
+ platform_ops->connect_cb(chip);
mutex_unlock(®ister_mutex);
+
return 0;
__error:
@@ -947,6 +987,9 @@ static void usb_audio_disconnect(struct usb_interface *intf)
card = chip->card;
mutex_lock(®ister_mutex);
+ if (platform_ops && platform_ops->disconnect_cb)
+ platform_ops->disconnect_cb(chip);
+
if (atomic_inc_return(&chip->shutdown) == 1) {
struct snd_usb_stream *as;
struct snd_usb_endpoint *ep;
@@ -1090,6 +1133,11 @@ static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
chip->system_suspend = chip->num_suspended_intf;
}
+ mutex_lock(®ister_mutex);
+ if (platform_ops && platform_ops->suspend_cb)
+ platform_ops->suspend_cb(intf, message);
+ mutex_unlock(®ister_mutex);
+
return 0;
}
@@ -1130,6 +1178,11 @@ static int usb_audio_resume(struct usb_interface *intf)
snd_usb_midi_v2_resume_all(chip);
+ mutex_lock(®ister_mutex);
+ if (platform_ops && platform_ops->resume_cb)
+ platform_ops->resume_cb(intf);
+ mutex_unlock(®ister_mutex);
+
out:
if (chip->num_suspended_intf == chip->system_suspend) {
snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 6ec95b2edf86..2884912adc96 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -207,4 +207,13 @@ struct snd_usb_stream {
struct list_head list;
};
+struct snd_usb_platform_ops {
+ void (*connect_cb)(struct snd_usb_audio *chip);
+ void (*disconnect_cb)(struct snd_usb_audio *chip);
+ void (*suspend_cb)(struct usb_interface *intf, pm_message_t message);
+ void (*resume_cb)(struct usb_interface *intf);
+};
+
+int snd_usb_register_platform_ops(struct snd_usb_platform_ops *ops);
+int snd_usb_unregister_platform_ops(void);
#endif /* __USBAUDIO_CARD_H */
The USB backend should know about which sound resources are being shared
between the ASoC and USB SND paths. This can be utilized to properly
select and maintain the offloading devices.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/soc/qcom/qdsp6/q6usb.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
index 833a57deb321..e539b411c35e 100644
--- a/sound/soc/qcom/qdsp6/q6usb.c
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -27,11 +27,18 @@
#define Q6_USB_SID_MASK 0xF
+struct q6usb_status {
+ struct snd_soc_usb_device *sdev;
+ unsigned int pcm_index;
+};
+
struct q6usb_port_data {
struct q6afe_usb_cfg usb_cfg;
struct snd_soc_usb *usb;
struct q6usb_offload priv;
int active_usb_chip_idx;
+ unsigned long available_card_slot;
+ struct q6usb_status status[SNDRV_CARDS];
};
static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = {
@@ -113,6 +120,12 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
if (connected) {
/* We only track the latest USB headset plugged in */
data->active_usb_chip_idx = sdev->card_idx;
+
+ set_bit(sdev->card_idx, &data->available_card_slot);
+ data->status[sdev->card_idx].sdev = sdev;
+ } else {
+ clear_bit(sdev->card_idx, &data->available_card_slot);
+ data->status[sdev->card_idx].sdev = NULL;
}
return 0;
Expose API for creation of a jack control for notifying of available
devices that are plugged in/discovered, and that support offloading. This
allows for control names to be standardized across implementations of USB
audio offloading.
Signed-off-by: Wesley Cheng <[email protected]>
---
include/sound/soc-usb.h | 10 ++++++++++
sound/soc/soc-usb.c | 37 ++++++++++++++++++++++++++++++++++++-
2 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/include/sound/soc-usb.h b/include/sound/soc-usb.h
index 5e6076f65a41..3137f538270f 100644
--- a/include/sound/soc-usb.h
+++ b/include/sound/soc-usb.h
@@ -6,6 +6,8 @@
#ifndef __LINUX_SND_SOC_USB_H
#define __LINUX_SND_SOC_USB_H
+#include <sound/soc.h>
+
enum snd_soc_usb_kctl {
SND_SOC_USB_KCTL_CARD_ROUTE,
SND_SOC_USB_KCTL_PCM_ROUTE,
@@ -88,6 +90,8 @@ int snd_soc_usb_prepare_session(struct snd_soc_usb *usb, int card_idx, int pcm_i
int snd_soc_usb_shutdown_session(struct snd_soc_usb *usb, int session_id);
int snd_soc_usb_set_session_state(struct snd_soc_usb *usb, int session_id,
enum snd_soc_usb_dai_state state);
+int snd_soc_usb_setup_offload_jack(struct snd_soc_component *component,
+ struct snd_soc_jack *jack);
struct snd_soc_usb *snd_soc_usb_allocate_port(struct snd_soc_component *component,
int num_streams, void *data);
@@ -143,6 +147,12 @@ static inline int snd_soc_usb_set_session_state(struct snd_soc_usb *usb,
return -EINVAL;
}
+static inline int snd_soc_usb_setup_offload_jack(struct snd_soc_component *component,
+ struct snd_soc_jack *jack)
+{
+ return -ENODEV;
+}
+
static inline struct snd_soc_usb *snd_soc_usb_allocate_port(
struct snd_soc_component *component,
int num_streams, void *data)
diff --git a/sound/soc/soc-usb.c b/sound/soc/soc-usb.c
index e291f146a79d..27c76a33da32 100644
--- a/sound/soc/soc-usb.c
+++ b/sound/soc/soc-usb.c
@@ -4,8 +4,10 @@
*/
#include <linux/of.h>
#include <linux/usb.h>
-#include <sound/soc.h>
+
+#include <sound/jack.h>
#include <sound/soc-usb.h>
+
#include "../usb/card.h"
static DEFINE_MUTEX(ctx_mutex);
@@ -42,6 +44,39 @@ static struct snd_soc_usb *snd_soc_find_usb_ctx(struct device_node *node)
}
/* SOC USB sound kcontrols */
+/**
+ * snd_soc_usb_setup_offload_jack() - Create USB offloading jack
+ * @component: USB DPCM backend DAI component
+ * @jack: jack structure to create
+ *
+ * Creates a jack device for notifying userspace of the availability
+ * of an offload capable device.
+ *
+ * Returns 0 on success, negative on error.
+ *
+ */
+int snd_soc_usb_setup_offload_jack(struct snd_soc_component *component,
+ struct snd_soc_jack *jack)
+{
+ int ret;
+
+ ret = snd_soc_card_jack_new(component->card, "USB Offload Playback Jack",
+ SND_JACK_HEADPHONE, jack);
+ if (ret < 0) {
+ dev_err(component->card->dev, "Unable to add USB offload jack\n");
+ return ret;
+ }
+
+ ret = snd_soc_component_set_jack(component, jack, NULL);
+ if (ret) {
+ dev_warn(component->card->dev, "Failed to set jack: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_setup_offload_jack);
+
static int snd_soc_usb_get_offload_card_status(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
Allow for checks on a specific USB audio device to see if a requested PCM
format is supported. This is needed for support when playback is
initiated by the ASoC USB backend path.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/card.c | 31 +++++++++++++++++++++++++++++++
sound/usb/card.h | 3 +++
2 files changed, 34 insertions(+)
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 7dc8007ba839..1ad99a462038 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -155,6 +155,37 @@ int snd_usb_unregister_platform_ops(void)
}
EXPORT_SYMBOL_GPL(snd_usb_unregister_platform_ops);
+/*
+ * Checks to see if requested audio profile, i.e sample rate, # of
+ * channels, etc... is supported by the substream associated to the
+ * USB audio device.
+ */
+struct snd_usb_stream *snd_usb_find_suppported_substream(int card_idx,
+ struct snd_pcm_hw_params *params, int direction)
+{
+ struct snd_usb_audio *chip;
+ struct snd_usb_substream *subs;
+ struct snd_usb_stream *as;
+
+ /*
+ * Register mutex is held when populating and clearing usb_chip
+ * array.
+ */
+ guard(mutex)(®ister_mutex);
+ chip = usb_chip[card_idx];
+
+ if (chip && enable[card_idx]) {
+ list_for_each_entry(as, &chip->pcm_list, list) {
+ subs = &as->substream[direction];
+ if (snd_usb_find_substream_format(subs, params))
+ return as;
+ }
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(snd_usb_find_suppported_substream);
+
/*
* disconnect streams
* called from usb_audio_disconnect()
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 02e4ea898db5..d66cc0b139af 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -217,4 +217,7 @@ struct snd_usb_platform_ops {
int snd_usb_register_platform_ops(struct snd_usb_platform_ops *ops);
int snd_usb_unregister_platform_ops(void);
+
+struct snd_usb_stream *snd_usb_find_suppported_substream(int card_idx,
+ struct snd_pcm_hw_params *params, int direction);
#endif /* __USBAUDIO_CARD_H */
In order to allow userspace/applications know about USB offloading status,
expose a sound kcontrol that fetches information about which sound card
index is associated with the ASoC platform card supporting offloading. In
the USB audio offloading framework, the ASoC BE DAI link is the entity
responsible for registering to the SOC USB layer. SOC USB will expose more
details about the current offloading status, which includes the USB sound
card and USB PCM device indexes currently being used.
It is expected for the USB offloading driver to add the kcontrol to the
sound card associated with the USB audio device. An example output would
look like:
tinymix -D 1 get 'USB Offload Playback Capable Card'
0 (range -1->32)
Ths example signifies that card#0 has an USB offload capable path
available.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/usb/Kconfig | 10 +++++
sound/usb/qcom/Makefile | 6 ++-
sound/usb/qcom/mixer_usb_offload.c | 65 ++++++++++++++++++++++++++++++
sound/usb/qcom/mixer_usb_offload.h | 17 ++++++++
sound/usb/qcom/qc_audio_offload.c | 3 ++
5 files changed, 100 insertions(+), 1 deletion(-)
create mode 100644 sound/usb/qcom/mixer_usb_offload.c
create mode 100644 sound/usb/qcom/mixer_usb_offload.h
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 5cc3eaf53e6b..1228be3c1f83 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -176,6 +176,16 @@ config SND_BCD2000
To compile this driver as a module, choose M here: the module
will be called snd-bcd2000.
+config SND_USB_QC_OFFLOAD_MIXER
+ bool "Qualcomm USB Audio Offload mixer control"
+ help
+ Say Y to enable the Qualcomm USB audio offloading mixer controls.
+ This exposes an USB offload capable kcontrol to signal to
+ applications about which platform sound card can support USB
+ audio offload. This can potentially be used to fetch further
+ information about the offloading status from the platform sound
+ card.
+
config SND_USB_AUDIO_QMI
tristate "Qualcomm Audio Offload driver"
depends on QCOM_QMI_HELPERS && SND_USB_AUDIO && USB_XHCI_SIDEBAND && SND_SOC_USB
diff --git a/sound/usb/qcom/Makefile b/sound/usb/qcom/Makefile
index a81c9b28d484..eada5cd7b71f 100644
--- a/sound/usb/qcom/Makefile
+++ b/sound/usb/qcom/Makefile
@@ -1,2 +1,6 @@
snd-usb-audio-qmi-objs := usb_audio_qmi_v01.o qc_audio_offload.o
-obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o
\ No newline at end of file
+obj-$(CONFIG_SND_USB_AUDIO_QMI) += snd-usb-audio-qmi.o
+
+ifneq ($(CONFIG_SND_USB_QC_OFFLOAD_MIXER),)
+snd-usb-audio-qmi-objs += mixer_usb_offload.o
+endif
\ No newline at end of file
diff --git a/sound/usb/qcom/mixer_usb_offload.c b/sound/usb/qcom/mixer_usb_offload.c
new file mode 100644
index 000000000000..cd6e5600e795
--- /dev/null
+++ b/sound/usb/qcom/mixer_usb_offload.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/usb.h>
+
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/soc-usb.h>
+
+#include "../card.h"
+#include "../mixer.h"
+#include "../usbaudio.h"
+
+#include "mixer_usb_offload.h"
+
+static int
+snd_usb_offload_available_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct device *sysdev = snd_kcontrol_chip(kcontrol);
+ int ret;
+
+ ret = snd_soc_usb_device_offload_available(sysdev);
+ ucontrol->value.integer.value[0] = ret < 0 ? -1 : ret;
+
+ return ret < 0 ? ret : 0;
+}
+
+static int snd_usb_offload_available_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = -1;
+ uinfo->value.integer.max = SNDRV_CARDS;
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new snd_usb_offload_available_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .name = "USB Offload Playback Capable Card",
+ .info = snd_usb_offload_available_info,
+ .get = snd_usb_offload_available_get,
+};
+
+/**
+ * snd_usb_offload_create_ctl() - Add USB offload bounded mixer
+ * @chip - USB SND chip device
+ *
+ * Creates a sound control for a USB audio device, so that applications can
+ * query for if there is an available USB audio offload path, and which
+ * card is managing it.
+ */
+int snd_usb_offload_create_ctl(struct snd_usb_audio *chip)
+{
+ struct usb_device *udev = chip->dev;
+
+ return snd_ctl_add(chip->card,
+ snd_ctl_new1(&snd_usb_offload_available_ctl,
+ udev->bus->sysdev));
+}
diff --git a/sound/usb/qcom/mixer_usb_offload.h b/sound/usb/qcom/mixer_usb_offload.h
new file mode 100644
index 000000000000..0efda52e92b6
--- /dev/null
+++ b/sound/usb/qcom/mixer_usb_offload.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef __USB_OFFLOAD_MIXER_H
+#define __USB_OFFLOAD_MIXER_H
+
+#if IS_ENABLED(CONFIG_SND_USB_QC_OFFLOAD_MIXER)
+int snd_usb_offload_create_ctl(struct snd_usb_audio *chip);
+#else
+static inline int snd_usb_offload_create_ctl(struct snd_usb_audio *chip)
+{
+ return -ENODEV;
+}
+#endif
+#endif /* __USB_OFFLOAD_MIXER_H */
diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index 4deec0b6fc08..6a25a390f8ae 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -37,6 +37,7 @@
#include "../pcm.h"
#include "../power.h"
+#include "mixer_usb_offload.h"
#include "usb_audio_qmi_v01.h"
/* Stream disable request timeout during USB device disconnect */
@@ -1660,6 +1661,8 @@ static void qc_usb_audio_offload_probe(struct snd_usb_audio *chip)
uaudio_qdev->last_card_num = chip->card->number;
snd_soc_usb_connect(usb_get_usb_backend(udev), sdev);
+ snd_usb_offload_create_ctl(chip);
+
mutex_unlock(&chip->mutex);
mutex_unlock(&qdev_mutex);
Utilize the xhci_set_interrupter_moderation() API to set the IMOD value for
interrupters, so that secondary interrupts can also configure this
parameter when clients request for it.
Signed-off-by: Wesley Cheng <[email protected]>
---
drivers/usb/host/xhci.c | 3 ++-
drivers/usb/host/xhci.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 061cb60ffac1..1e31a0811574 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -349,7 +349,7 @@ int xhci_disable_interrupter(struct xhci_interrupter *ir)
EXPORT_SYMBOL_GPL(xhci_disable_interrupter);
/* interrupt moderation interval imod_interval in nanoseconds */
-static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
+int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
u32 imod_interval)
{
u32 imod;
@@ -364,6 +364,7 @@ static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
return 0;
}
+EXPORT_SYMBOL_GPL(xhci_set_interrupter_moderation);
static void compliance_mode_recovery(struct timer_list *t)
{
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 67d729635d56..bc3f18651494 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1876,6 +1876,8 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci,
struct usb_tt *tt, gfp_t mem_flags);
int xhci_enable_interrupter(struct xhci_interrupter *ir);
int xhci_disable_interrupter(struct xhci_interrupter *ir);
+int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
+ u32 imod_interval);
/* xHCI ring, segment, TRB, and TD functions */
dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
Some use cases maybe require that the secondary interrupter's events to
be handled by the OS. In this case, configure the IMOD and the
skip_events property to enable the interrupter's events. By default,
assume that the secondary interrupter doesn't want to enable OS event
handling.
Signed-off-by: Wesley Cheng <[email protected]>
---
drivers/usb/host/xhci-sideband.c | 28 ++++++++++++++++++++++++++++
include/linux/usb/xhci-sideband.h | 2 ++
2 files changed, 30 insertions(+)
diff --git a/drivers/usb/host/xhci-sideband.c b/drivers/usb/host/xhci-sideband.c
index 255feae33c6e..6fdae9840c11 100644
--- a/drivers/usb/host/xhci-sideband.c
+++ b/drivers/usb/host/xhci-sideband.c
@@ -237,6 +237,30 @@ xhci_sideband_get_event_buffer(struct xhci_sideband *sb)
}
EXPORT_SYMBOL_GPL(xhci_sideband_get_event_buffer);
+/**
+ * xhci_sideband_enable_interrupt - enable interrupt for secondary interrupter
+ * @sb: sideband instance for this usb device
+ * @imod_interval: number of event ring segments to allocate
+ *
+ * Enables OS owned event handling for a particular interrupter if client
+ * requests for it. In addition, set the IMOD interval for this particular
+ * interrupter.
+ *
+ * Returns 0 on success, negative error otherwise
+ */
+int xhci_sideband_enable_interrupt(struct xhci_sideband *sb, u32 imod_interval)
+{
+ if (!sb || !sb->ir)
+ return -ENODEV;
+
+ xhci_set_interrupter_moderation(sb->ir, imod_interval);
+ sb->ir->skip_events = false;
+ xhci_enable_interrupter(sb->ir);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_sideband_enable_interrupt);
+
/**
* xhci_sideband_create_interrupter - creates a new interrupter for this sideband
* @sb: sideband instance for this usb device
@@ -275,6 +299,8 @@ xhci_sideband_create_interrupter(struct xhci_sideband *sb, int num_seg,
}
sb->ir->ip_autoclear = ip_autoclear;
+ /* skip events for secondary interrupters by default */
+ sb->ir->skip_events = true;
out:
mutex_unlock(&sb->mutex);
@@ -297,6 +323,8 @@ xhci_sideband_remove_interrupter(struct xhci_sideband *sb)
return;
mutex_lock(&sb->mutex);
+ if (!sb->ir->skip_events)
+ xhci_disable_interrupter(sb->ir);
xhci_remove_secondary_interrupter(xhci_to_hcd(sb->xhci), sb->ir);
sb->ir = NULL;
diff --git a/include/linux/usb/xhci-sideband.h b/include/linux/usb/xhci-sideband.h
index 1035dae43cee..a749ae307ba7 100644
--- a/include/linux/usb/xhci-sideband.h
+++ b/include/linux/usb/xhci-sideband.h
@@ -54,6 +54,8 @@ xhci_sideband_get_endpoint_buffer(struct xhci_sideband *sb,
struct sg_table *
xhci_sideband_get_event_buffer(struct xhci_sideband *sb);
+int xhci_sideband_enable_interrupt(struct xhci_sideband *sb, u32 imod_interval);
+
int
xhci_sideband_create_interrupter(struct xhci_sideband *sb, int num_seg,
bool ip_autoclear);
Create a USB BE component that will register a new USB port to the ASoC USB
framework. This will handle determination on if the requested audio
profile is supported by the USB device currently selected.
Signed-off-by: Wesley Cheng <[email protected]>
---
include/sound/q6usboffload.h | 20 ++++
sound/soc/qcom/Kconfig | 10 ++
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6usb.c | 218 ++++++++++++++++++++++++++++++++++
4 files changed, 249 insertions(+)
create mode 100644 include/sound/q6usboffload.h
create mode 100644 sound/soc/qcom/qdsp6/q6usb.c
diff --git a/include/sound/q6usboffload.h b/include/sound/q6usboffload.h
new file mode 100644
index 000000000000..fdc1f5c53a3b
--- /dev/null
+++ b/include/sound/q6usboffload.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * linux/sound/q6usboffload.h -- QDSP6 USB offload
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/**
+ * struct q6usb_offload
+ * @dev - dev handle to usb be
+ * @sid - streamID for iommu
+ * @intr_num - usb interrupter number
+ * @domain - allocated iommu domain
+ **/
+struct q6usb_offload {
+ struct device *dev;
+ long long sid;
+ u16 intr_num;
+ struct iommu_domain *domain;
+};
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 762491d6f2f2..a1beafe2b1dd 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -118,6 +118,16 @@ config SND_SOC_QDSP6_PRM
tristate
select SND_SOC_QDSP6_PRM_LPASS_CLOCKS
+config SND_SOC_QDSP6_USB
+ tristate "SoC ALSA USB offloading backing for QDSP6"
+ depends on SND_SOC_USB
+ help
+ Adds support for USB offloading for QDSP6 ASoC
+ based platform sound cards. This will enable the
+ Q6USB DPCM backend DAI link, which will interact
+ with the SoC USB framework to initialize a session
+ with active USB SND devices.
+
config SND_SOC_QDSP6
tristate "SoC ALSA audio driver for QDSP6"
depends on QCOM_APR
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
index 3963bf234664..c9457ee898d0 100644
--- a/sound/soc/qcom/qdsp6/Makefile
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o
obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o
obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o
obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o
+obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o
diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
new file mode 100644
index 000000000000..00cba1021dc6
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/iommu.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <sound/asound.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/q6usboffload.h>
+#include <sound/soc.h>
+#include <sound/soc-usb.h>
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+
+#include "q6afe.h"
+#include "q6dsp-lpass-ports.h"
+
+#define Q6_USB_SID_MASK 0xF
+
+struct q6usb_port_data {
+ struct q6afe_usb_cfg usb_cfg;
+ struct snd_soc_usb *usb;
+ struct q6usb_offload priv;
+ int active_usb_chip_idx;
+};
+
+static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = {
+ SND_SOC_DAPM_HP("USB_RX_BE", NULL),
+};
+
+static const struct snd_soc_dapm_route q6usb_dapm_routes[] = {
+ {"USB Playback", NULL, "USB_RX_BE"},
+};
+
+static int q6usb_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ return 0;
+}
+
+static const struct snd_soc_dai_ops q6usb_ops = {
+ .hw_params = q6usb_hw_params,
+};
+
+static struct snd_soc_dai_driver q6usb_be_dais[] = {
+ {
+ .playback = {
+ .stream_name = "USB BE RX",
+ .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
+ SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |
+ SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
+ .channels_min = 1,
+ .channels_max = 2,
+ .rate_max = 192000,
+ .rate_min = 8000,
+ },
+ .id = USB_RX,
+ .name = "USB_RX_BE",
+ .ops = &q6usb_ops,
+ },
+};
+
+static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *component,
+ const struct of_phandle_args *args,
+ const char **dai_name)
+{
+ int id = args->args[0];
+ int ret = -EINVAL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(q6usb_be_dais); i++) {
+ if (q6usb_be_dais[i].id == id) {
+ *dai_name = q6usb_be_dais[i].name;
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
+ struct snd_soc_usb_device *sdev, bool connected)
+{
+ struct q6usb_port_data *data;
+
+ if (!usb->component)
+ return -ENODEV;
+
+ data = dev_get_drvdata(usb->component->dev);
+
+ if (connected) {
+ /* We only track the latest USB headset plugged in */
+ data->active_usb_chip_idx = sdev->card_idx;
+ }
+
+ return 0;
+}
+
+static int q6usb_component_probe(struct snd_soc_component *component)
+{
+ struct q6usb_port_data *data = dev_get_drvdata(component->dev);
+ struct snd_soc_usb *usb;
+ int ret;
+
+ usb = snd_soc_usb_allocate_port(component, 1, &data->priv);
+ if (IS_ERR(usb))
+ return -ENOMEM;
+
+ usb->connection_status_cb = q6usb_alsa_connection_cb;
+
+ ret = snd_soc_usb_add_port(usb);
+ if (ret < 0) {
+ dev_err(component->dev, "failed to add usb port\n");
+ goto free_usb;
+ }
+
+ data->usb = usb;
+
+ return 0;
+
+free_usb:
+ snd_soc_usb_free_port(usb);
+
+ return ret;
+}
+
+static void q6usb_component_remove(struct snd_soc_component *component)
+{
+ struct q6usb_port_data *data = dev_get_drvdata(component->dev);
+
+ snd_soc_usb_remove_port(data->usb);
+ snd_soc_usb_free_port(data->usb);
+}
+
+static const struct snd_soc_component_driver q6usb_dai_component = {
+ .probe = q6usb_component_probe,
+ .remove = q6usb_component_remove,
+ .name = "q6usb-dai-component",
+ .dapm_widgets = q6usb_dai_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets),
+ .dapm_routes = q6usb_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes),
+ .of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name,
+};
+
+static int q6usb_dai_dev_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct q6usb_port_data *data;
+ struct device *dev = &pdev->dev;
+ struct of_phandle_args args;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ret = of_property_read_u16(node, "qcom,usb-audio-intr-idx",
+ &data->priv.intr_num);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read intr idx.\n");
+ return ret;
+ }
+
+ ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
+ if (ret < 0)
+ data->priv.sid = -1;
+ else
+ data->priv.sid = args.args[0] & Q6_USB_SID_MASK;
+
+ data->priv.domain = iommu_get_domain_for_dev(&pdev->dev);
+
+ data->priv.dev = dev;
+ dev_set_drvdata(dev, data);
+
+ return devm_snd_soc_register_component(dev, &q6usb_dai_component,
+ q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais));
+}
+
+static const struct of_device_id q6usb_dai_device_id[] = {
+ { .compatible = "qcom,q6usb" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, q6usb_dai_device_id);
+
+static struct platform_driver q6usb_dai_platform_driver = {
+ .driver = {
+ .name = "q6usb-dai",
+ .of_match_table = of_match_ptr(q6usb_dai_device_id),
+ },
+ .probe = q6usb_dai_dev_probe,
+ /*
+ * Remove not required as resources are cleaned up as part of
+ * component removal. Others are device managed resources.
+ */
+};
+module_platform_driver(q6usb_dai_platform_driver);
+
+MODULE_DESCRIPTION("Q6 USB backend dai driver");
+MODULE_LICENSE("GPL");
In order for device selection to be supported, the Q6USB backend DAI link
will need to be notified about the device to start the offloading session
on. Device selection is made possible by setting the Q6AFE device token.
The audio DSP utilizes this parameter, and will pass this field back to
the USB offload driver within the QMI stream requests.
Signed-off-by: Wesley Cheng <[email protected]>
---
sound/soc/qcom/qdsp6/q6usb.c | 115 +++++++++++++++++++++++++++++++++--
1 file changed, 111 insertions(+), 4 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
index e539b411c35e..72ec7d45f916 100644
--- a/sound/soc/qcom/qdsp6/q6usb.c
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -36,9 +36,12 @@ struct q6usb_port_data {
struct q6afe_usb_cfg usb_cfg;
struct snd_soc_usb *usb;
struct q6usb_offload priv;
- int active_usb_chip_idx;
+ struct mutex mutex;
unsigned long available_card_slot;
struct q6usb_status status[SNDRV_CARDS];
+ bool idx_valid;
+ int sel_card_idx;
+ int sel_pcm_idx;
};
static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = {
@@ -54,10 +57,34 @@ static int q6usb_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct q6usb_port_data *data = dev_get_drvdata(dai->dev);
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+ struct q6afe_port *q6usb_afe;
int direction = substream->stream;
+ int chip_idx;
+ int ret;
+
+ mutex_lock(&data->mutex);
+ chip_idx = data->status[data->sel_card_idx].sdev->chip_idx;
+
+ ret = snd_soc_usb_find_format(chip_idx, params, direction);
+ if (ret < 0)
+ goto out;
+
+ q6usb_afe = q6afe_port_get_from_id(cpu_dai->dev, USB_RX);
+ if (IS_ERR(q6usb_afe))
+ goto out;
- return snd_soc_usb_find_format(data->active_usb_chip_idx, params,
- direction);
+ ret = afe_port_send_usb_dev_param(q6usb_afe, data->sel_card_idx,
+ data->sel_pcm_idx);
+ if (ret < 0)
+ goto out;
+
+ data->status[data->sel_card_idx].pcm_index = data->sel_pcm_idx;
+out:
+ mutex_unlock(&data->mutex);
+
+ return ret;
}
static const struct snd_soc_dai_ops q6usb_ops = {
@@ -88,6 +115,70 @@ static struct snd_soc_dai_driver q6usb_be_dais[] = {
},
};
+static int q6usb_get_offload_dev(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol,
+ enum snd_soc_usb_kctl type)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct q6usb_port_data *data = dev_get_drvdata(component->dev);
+ int idx;
+
+ mutex_lock(&data->mutex);
+
+ if (!data->available_card_slot) {
+ idx = -1;
+ } else {
+ if (type == SND_SOC_USB_KCTL_CARD_ROUTE)
+ idx = data->sel_card_idx;
+ else
+ idx = data->sel_pcm_idx;
+ }
+
+ ucontrol->value.integer.value[0] = idx;
+ mutex_unlock(&data->mutex);
+
+ return 0;
+}
+
+static int q6usb_put_offload_dev(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol,
+ enum snd_soc_usb_kctl type)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct q6usb_port_data *data = dev_get_drvdata(component->dev);
+ int changed = 0;
+ int idx;
+
+ idx = ucontrol->value.integer.value[0];
+
+ mutex_lock(&data->mutex);
+ switch (type) {
+ case SND_SOC_USB_KCTL_CARD_ROUTE:
+ if (idx >= 0 && test_bit(idx, &data->available_card_slot)) {
+ data->sel_card_idx = idx;
+ changed = 1;
+ }
+ break;
+ case SND_SOC_USB_KCTL_PCM_ROUTE:
+ if (idx >= 0 && data->sel_card_idx >= 0 &&
+ idx < data->status[data->sel_card_idx].sdev->num_playback) {
+ data->sel_pcm_idx = idx;
+ changed = 1;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (changed)
+ data->idx_valid = true;
+
+out:
+ mutex_unlock(&data->mutex);
+
+ return changed;
+}
+
static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *component,
const struct of_phandle_args *args,
const char **dai_name)
@@ -117,16 +208,28 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb,
data = dev_get_drvdata(usb->component->dev);
+ mutex_lock(&data->mutex);
if (connected) {
/* We only track the latest USB headset plugged in */
- data->active_usb_chip_idx = sdev->card_idx;
+ if (!data->idx_valid) {
+ data->sel_card_idx = sdev->card_idx;
+ data->sel_pcm_idx = 0;
+ }
set_bit(sdev->card_idx, &data->available_card_slot);
data->status[sdev->card_idx].sdev = sdev;
} else {
clear_bit(sdev->card_idx, &data->available_card_slot);
data->status[sdev->card_idx].sdev = NULL;
+
+ if (data->sel_card_idx == sdev->card_idx) {
+ data->idx_valid = false;
+ data->sel_card_idx = data->available_card_slot ?
+ ffs(data->available_card_slot) - 1 : 0;
+ data->sel_pcm_idx = 0;
+ }
}
+ mutex_unlock(&data->mutex);
return 0;
}
@@ -142,6 +245,8 @@ static int q6usb_component_probe(struct snd_soc_component *component)
return -ENOMEM;
usb->connection_status_cb = q6usb_alsa_connection_cb;
+ usb->put_offload_dev = q6usb_put_offload_dev;
+ usb->get_offload_dev = q6usb_get_offload_dev;
ret = snd_soc_usb_add_port(usb);
if (ret < 0) {
@@ -205,6 +310,8 @@ static int q6usb_dai_dev_probe(struct platform_device *pdev)
data->priv.domain = iommu_get_domain_for_dev(&pdev->dev);
+ mutex_init(&data->mutex);
+
data->priv.dev = dev;
dev_set_drvdata(dev, data);
As part of xHCI bus suspend, the XHCI is halted. However, if there are
pending events in the secondary event ring, it is observed that the xHCI
controller stops responding to further commands upon host or device
initiated bus resume. Iterate through all pending events and update the
dequeue pointer to the beginning of the event ring.
Signed-off-by: Wesley Cheng <[email protected]>
---
drivers/usb/host/xhci-mem.c | 7 ++++++-
drivers/usb/host/xhci-ring.c | 33 ++++++++++++++++++++++++++++++++-
drivers/usb/host/xhci.h | 5 +++++
3 files changed, 43 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 69dd86669883..d686de0581b3 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1816,7 +1816,7 @@ xhci_remove_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
tmp &= ERST_SIZE_MASK;
writel(tmp, &ir->ir_set->erst_size);
- xhci_write_64(xhci, ERST_EHB, &ir->ir_set->erst_dequeue);
+ xhci_update_erst_dequeue(xhci, ir, true);
}
}
@@ -1859,6 +1859,11 @@ void xhci_remove_secondary_interrupter(struct usb_hcd *hcd, struct xhci_interrup
return;
}
+ /*
+ * Cleanup secondary interrupter to ensure there are no pending events.
+ * This also updates event ring dequeue pointer back to the start.
+ */
+ xhci_skip_sec_intr_events(xhci, ir->event_ring, ir);
intr_num = ir->intr_num;
xhci_remove_interrupter(xhci, ir);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6c7a21f522cd..b9c2c23d5717 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3034,7 +3034,7 @@ static int xhci_handle_event_trb(struct xhci_hcd *xhci, struct xhci_interrupter
* - When all events have finished
* - To avoid "Event Ring Full Error" condition
*/
-static void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
+void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
struct xhci_interrupter *ir,
bool clear_ehb)
{
@@ -3134,6 +3134,37 @@ static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir
return 0;
}
+/*
+ * Move the event ring dequeue pointer to skip events kept in the secondary
+ * event ring. This is used to ensure that pending events in the ring are
+ * acknowledged, so the XHCI HCD can properly enter suspend/resume. The
+ * secondary ring is typically maintained by an external component.
+ */
+void xhci_skip_sec_intr_events(struct xhci_hcd *xhci,
+ struct xhci_ring *ring, struct xhci_interrupter *ir)
+{
+ union xhci_trb *current_trb;
+ u64 erdp_reg;
+ dma_addr_t deq;
+
+ /* disable irq, ack pending interrupt and ack all pending events */
+ xhci_disable_interrupter(ir);
+
+ /* last acked event trb is in erdp reg */
+ erdp_reg = xhci_read_64(xhci, &ir->ir_set->erst_dequeue);
+ deq = (dma_addr_t)(erdp_reg & ERST_PTR_MASK);
+ if (!deq) {
+ xhci_err(xhci, "event ring handling not required\n");
+ return;
+ }
+
+ current_trb = ir->event_ring->dequeue;
+ /* read cycle state of the last acked trb to find out CCS */
+ ring->cycle_state = le32_to_cpu(current_trb->event_cmd.flags) & TRB_CYCLE;
+
+ xhci_handle_events(xhci, ir);
+}
+
/*
* xHCI spec says we can get an interrupt, and if the HC has an error condition,
* we might get bad data out of the event ring. Section 4.10.2.7 has a list of
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 57ad141242ca..79dc3801d359 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1841,6 +1841,8 @@ struct xhci_interrupter *
xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg);
void xhci_remove_secondary_interrupter(struct usb_hcd
*hcd, struct xhci_interrupter *ir);
+void xhci_skip_sec_intr_events(struct xhci_hcd *xhci,
+ struct xhci_ring *ring, struct xhci_interrupter *ir);
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
@@ -1932,6 +1934,9 @@ void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring);
unsigned int count_trbs(u64 addr, u64 len);
int xhci_stop_endpoint_sync(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
int suspend, gfp_t gfp_flags);
+void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
+ struct xhci_interrupter *ir,
+ bool clear_ehb);
/* xHCI roothub code */
void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
Add SND kcontrol to SOC USB, which will allow for userpsace to determine
which USB card number and PCM device to offload. This allows for userspace
to potentially tag an alternate path for a specific USB SND card and PCM
device. Previously, control was absent, and the offload path would be
enabled on the last USB SND device which was connected. This logic will
continue to be applicable if no mixer input is received for specific device
selection.
An example to configure the offload device using tinymix:
tinymix -D 0 set 'USB Offload Playback Route Select' 1 0
The above command will configure the offload path to utilize card#1 and PCM
stream#0.
Signed-off-by: Wesley Cheng <[email protected]>
---
include/sound/soc-usb.h | 16 ++++
sound/soc/soc-usb.c | 157 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 173 insertions(+)
diff --git a/include/sound/soc-usb.h b/include/sound/soc-usb.h
index 8f2d3064b520..18cdc59df9aa 100644
--- a/include/sound/soc-usb.h
+++ b/include/sound/soc-usb.h
@@ -6,6 +6,12 @@
#ifndef __LINUX_SND_SOC_USB_H
#define __LINUX_SND_SOC_USB_H
+enum snd_soc_usb_kctl {
+ SND_SOC_USB_KCTL_CARD_ROUTE,
+ SND_SOC_USB_KCTL_PCM_ROUTE,
+ SND_SOC_USB_KCTL_MAX,
+};
+
/**
* struct snd_soc_usb_device
* @card_idx - sound card index associated with USB device
@@ -24,16 +30,26 @@ struct snd_soc_usb_device {
* struct snd_soc_usb
* @list - list head for SND SOC struct list
* @component - reference to ASoC component
+ * @kctl - list of kcontrols created
* @num_supported_streams - number of supported concurrent sessions
* @connection_status_cb - callback to notify connection events
+ * @put_offload_dev - callback to select USB sound card/PCM device
+ * @get_offload_dev - callback to fetch selected USB sound card/PCM device
* @priv_data - driver data
**/
struct snd_soc_usb {
struct list_head list;
struct snd_soc_component *component;
+ struct snd_kcontrol *kctl[SND_SOC_USB_KCTL_MAX];
unsigned int num_supported_streams;
int (*connection_status_cb)(struct snd_soc_usb *usb,
struct snd_soc_usb_device *sdev, bool connected);
+ int (*put_offload_dev)(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol,
+ enum snd_soc_usb_kctl type);
+ int (*get_offload_dev)(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol,
+ enum snd_soc_usb_kctl type);
void *priv_data;
};
diff --git a/sound/soc/soc-usb.c b/sound/soc/soc-usb.c
index bc77204fd2db..ade09b416d45 100644
--- a/sound/soc/soc-usb.c
+++ b/sound/soc/soc-usb.c
@@ -15,6 +15,9 @@ static struct device_node *snd_soc_find_phandle(struct device *dev)
{
struct device_node *node;
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
node = of_parse_phandle(dev->of_node, "usb-soc-be", 0);
if (!node)
return ERR_PTR(-ENODEV);
@@ -38,6 +41,152 @@ static struct snd_soc_usb *snd_soc_find_usb_ctx(struct device_node *node)
return NULL;
}
+/* SOC USB sound kcontrols */
+static int soc_usb_put_offload_pcm_dev(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_usb *ctx = snd_soc_find_usb_ctx(component->dev->of_node);
+ int ret = 0;
+
+ mutex_lock(&ctx_mutex);
+ if (ctx && ctx->put_offload_dev)
+ ret = ctx->put_offload_dev(kcontrol, ucontrol,
+ SND_SOC_USB_KCTL_PCM_ROUTE);
+ mutex_unlock(&ctx_mutex);
+
+ return ret;
+}
+
+static int soc_usb_get_offload_pcm_dev(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_usb *ctx = snd_soc_find_usb_ctx(component->dev->of_node);
+ int ret = 0;
+
+ ucontrol->value.integer.value[0] = -1;
+
+ mutex_lock(&ctx_mutex);
+ if (ctx && ctx->get_offload_dev)
+ ret = ctx->get_offload_dev(kcontrol, ucontrol,
+ SND_SOC_USB_KCTL_PCM_ROUTE);
+ mutex_unlock(&ctx_mutex);
+
+ return ret;
+
+}
+
+static int soc_usb_put_offload_card_dev(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_usb *ctx = snd_soc_find_usb_ctx(component->dev->of_node);
+ int ret = 0;
+
+ mutex_lock(&ctx_mutex);
+ if (ctx && ctx->put_offload_dev)
+ ret = ctx->put_offload_dev(kcontrol, ucontrol,
+ SND_SOC_USB_KCTL_CARD_ROUTE);
+ mutex_unlock(&ctx_mutex);
+
+ return ret;
+}
+
+static int soc_usb_get_offload_card_dev(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_usb *ctx = snd_soc_find_usb_ctx(component->dev->of_node);
+ int ret = 0;
+
+ ucontrol->value.integer.value[0] = -1;
+
+ mutex_lock(&ctx_mutex);
+ if (ctx && ctx->get_offload_dev)
+ ret = ctx->get_offload_dev(kcontrol, ucontrol,
+ SND_SOC_USB_KCTL_CARD_ROUTE);
+ mutex_unlock(&ctx_mutex);
+
+ return ret;
+
+}
+
+static int soc_usb_offload_pcm_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = -1;
+ /* Arbitrary max value, as there is no 'limit' on number of PCM devices */
+ uinfo->value.integer.max = 0xff;
+
+ return 0;
+}
+
+static int soc_usb_offload_card_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = -1;
+ uinfo->value.integer.max = SNDRV_CARDS;
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new soc_usb_kcontrols[] = {
+ [SND_SOC_USB_KCTL_CARD_ROUTE] = {
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .name = "USB Offload Playback Route Card Select",
+ .info = soc_usb_offload_card_info,
+ .get = soc_usb_get_offload_card_dev,
+ .put = soc_usb_put_offload_card_dev,
+ },
+ [SND_SOC_USB_KCTL_PCM_ROUTE] = {
+ .iface = SNDRV_CTL_ELEM_IFACE_CARD,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .name = "USB Offload Playback Route PCM Select",
+ .info = soc_usb_offload_pcm_info,
+ .get = soc_usb_get_offload_pcm_dev,
+ .put = soc_usb_put_offload_pcm_dev,
+ },
+};
+
+static int snd_soc_usb_control_remove(struct snd_soc_usb *usb)
+{
+ struct snd_soc_component *component = usb->component;
+ int i;
+
+ for (i = 0; i < SND_SOC_USB_KCTL_MAX; i++) {
+ if (usb->kctl[i]) {
+ snd_ctl_remove(component->card->snd_card,
+ usb->kctl[i]);
+ snd_ctl_free_one(usb->kctl[i]);
+ usb->kctl[i] = NULL;
+ }
+ }
+
+ return 0;
+}
+
+static int snd_soc_usb_control_init(struct snd_soc_usb *usb)
+{
+ struct snd_soc_component *component = usb->component;
+ int ret;
+ int i;
+
+ for (i = 0; i < SND_SOC_USB_KCTL_MAX; i++) {
+ usb->kctl[i] = snd_ctl_new1(&soc_usb_kcontrols[i], component);
+ ret = snd_ctl_add(component->card->snd_card, usb->kctl[i]);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+
/**
* snd_soc_usb_get_components_tag() - Retrieve SOC USB component tag
* @playback: direction of audio stream
@@ -158,6 +307,12 @@ EXPORT_SYMBOL_GPL(snd_soc_usb_free_port);
*/
int snd_soc_usb_add_port(struct snd_soc_usb *usb)
{
+ int ret;
+
+ ret = snd_soc_usb_control_init(usb);
+ if (ret < 0)
+ return ret;
+
mutex_lock(&ctx_mutex);
list_add_tail(&usb->list, &usb_ctx_list);
mutex_unlock(&ctx_mutex);
@@ -187,6 +342,8 @@ int snd_soc_usb_remove_port(struct snd_soc_usb *usb)
}
mutex_unlock(&ctx_mutex);
+ snd_soc_usb_control_remove(usb);
+
return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_usb_remove_port);
Introduce a helper to check if a particular PCM format is supported by the
USB audio device connected. If the USB audio device does not have an
audio profile which can support the requested format, then notify the USB
backend.
Signed-off-by: Wesley Cheng <[email protected]>
---
include/sound/soc-usb.h | 9 +++++++++
sound/soc/soc-usb.c | 25 +++++++++++++++++++++++++
2 files changed, 34 insertions(+)
diff --git a/include/sound/soc-usb.h b/include/sound/soc-usb.h
index 5b2fa0877523..8f2d3064b520 100644
--- a/include/sound/soc-usb.h
+++ b/include/sound/soc-usb.h
@@ -39,6 +39,8 @@ struct snd_soc_usb {
#if IS_ENABLED(CONFIG_SND_SOC_USB)
const char *snd_soc_usb_get_components_tag(bool playback);
+int snd_soc_usb_find_format(int card_idx, struct snd_pcm_hw_params *params,
+ int direction);
int snd_soc_usb_connect(struct device *usbdev, struct snd_soc_usb_device *sdev);
int snd_soc_usb_disconnect(struct device *usbdev, struct snd_soc_usb_device *sdev);
@@ -55,6 +57,13 @@ static inline const char *snd_soc_usb_get_components_tag(bool playback)
return "";
}
+static inline int snd_soc_usb_find_format(int card_idx,
+ struct snd_pcm_hw_params *params,
+ int direction)
+{
+ return -EINVAL;
+}
+
static inline int snd_soc_usb_connect(struct device *usbdev,
struct snd_soc_usb_device *sdev)
{
diff --git a/sound/soc/soc-usb.c b/sound/soc/soc-usb.c
index d21db2345966..bc77204fd2db 100644
--- a/sound/soc/soc-usb.c
+++ b/sound/soc/soc-usb.c
@@ -80,6 +80,31 @@ void *snd_soc_usb_find_priv_data(struct device *dev)
}
EXPORT_SYMBOL_GPL(snd_soc_usb_find_priv_data);
+/**
+ * snd_soc_usb_find_format() - Check if audio format is supported
+ * @card_idx: USB sound chip array index
+ * @params: PCM parameters
+ * @direction: capture or playback
+ *
+ * Ensure that a requested audio profile from the ASoC side is able to be
+ * supported by the USB device.
+ *
+ * Return 0 on success, negative on error.
+ *
+ */
+int snd_soc_usb_find_format(int card_idx, struct snd_pcm_hw_params *params,
+ int direction)
+{
+ struct snd_usb_stream *as;
+
+ as = snd_usb_find_suppported_substream(card_idx, params, direction);
+ if (!as)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_usb_find_format);
+
/**
* snd_soc_usb_allocate_port() - allocate a SOC USB device
* @component: USB DPCM backend DAI component
Secondary interrupters can be OS owned, so expose the enable and disable
interrupter APIs, so that the interrupts can be configured as requested
depending on the client.
Signed-off-by: Wesley Cheng <[email protected]>
---
drivers/usb/host/xhci.c | 6 ++++--
drivers/usb/host/xhci.h | 2 ++
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0680f4703c92..061cb60ffac1 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -320,7 +320,7 @@ static void xhci_zero_64b_regs(struct xhci_hcd *xhci)
xhci_info(xhci, "Fault detected\n");
}
-static int xhci_enable_interrupter(struct xhci_interrupter *ir)
+int xhci_enable_interrupter(struct xhci_interrupter *ir)
{
u32 iman;
@@ -332,8 +332,9 @@ static int xhci_enable_interrupter(struct xhci_interrupter *ir)
return 0;
}
+EXPORT_SYMBOL_GPL(xhci_enable_interrupter);
-static int xhci_disable_interrupter(struct xhci_interrupter *ir)
+int xhci_disable_interrupter(struct xhci_interrupter *ir)
{
u32 iman;
@@ -345,6 +346,7 @@ static int xhci_disable_interrupter(struct xhci_interrupter *ir)
return 0;
}
+EXPORT_SYMBOL_GPL(xhci_disable_interrupter);
/* interrupt moderation interval imod_interval in nanoseconds */
static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 0f3ae08507ed..dbed0199aa5c 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1873,6 +1873,8 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags);
+int xhci_enable_interrupter(struct xhci_interrupter *ir);
+int xhci_disable_interrupter(struct xhci_interrupter *ir);
/* xHCI ring, segment, TRB, and TD functions */
dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
Depending on the interrupter use case, the OS may only be used to handle
the interrupter event ring clean up. In these scenarios, event TRBs don't
need to be handled by the OS, so introduce an xhci interrupter flag to tag
if the events from an interrupter needs to be handled or not.
Signed-off-by: Wesley Cheng <[email protected]>
---
drivers/usb/host/xhci-ring.c | 17 +++++++++++++----
drivers/usb/host/xhci.h | 1 +
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 52278afea94b..6c7a21f522cd 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2973,14 +2973,22 @@ static int handle_tx_event(struct xhci_hcd *xhci,
}
/*
- * This function handles one OS-owned event on the event ring. It may drop
- * xhci->lock between event processing (e.g. to pass up port status changes).
+ * This function handles one OS-owned event on the event ring, or ignores one event
+ * on interrupters which are non-OS owned. It may drop xhci->lock between event
+ * processing (e.g. to pass up port status changes).
*/
static int xhci_handle_event_trb(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
union xhci_trb *event)
{
u32 trb_type;
+ /*
+ * Some interrupters do not need to handle event TRBs, as they may be
+ * managed by another entity, but rely on the OS to clean up.
+ */
+ if (ir->skip_events)
+ return 0;
+
trace_xhci_handle_event(ir->event_ring, &event->generic);
/*
@@ -3069,8 +3077,9 @@ static void xhci_clear_interrupt_pending(struct xhci_hcd *xhci,
}
/*
- * Handle all OS-owned events on an interrupter event ring. It may drop
- * and reaquire xhci->lock between event processing.
+ * Handle all OS-owned events on an interrupter event ring, or skip pending events
+ * for non OS owned interrupter event ring. It may drop and reaquire xhci->lock
+ * between event processing.
*/
static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
{
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dbed0199aa5c..67d729635d56 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1432,6 +1432,7 @@ struct xhci_interrupter {
struct xhci_intr_reg __iomem *ir_set;
unsigned int intr_num;
bool ip_autoclear;
+ bool skip_events;
u32 isoc_bei_interval;
/* For interrupter registers save and restore over suspend/resume */
u32 s3_irq_pending;
On Thu, Apr 25, 2024 at 02:51:25PM -0700, Wesley Cheng wrote:
> With the introduction of the soc-usb driver, add documentation highlighting
> details on how to utilize the new driver and how it interacts with
> different components in USB SND and ASoC. It provides examples on how to
> implement the drivers that will need to be introduced in order to enable
> USB audio offloading.
>
The doc LGTM, thanks!
Reviewed-by: Bagas Sanjaya <[email protected]>
--
An old man doll... just what I always wanted! - Clara
On 4/25/2024 11:50 PM, Wesley Cheng wrote:
> Some platforms may have support for offloading USB audio devices to a
> dedicated audio DSP. Introduce a set of APIs that allow for management of
> USB sound card and PCM devices enumerated by the USB SND class driver.
> This allows for the ASoC components to be aware of what USB devices are
> available for offloading.
>
> Signed-off-by: Wesley Cheng <[email protected]>
> ---
(...)
> +const char *snd_soc_usb_get_components_tag(bool playback)
> +{
> + if (playback)
> + return "usbplybkoffld: 1";
> + else
> + return "usbcapoffld: 1";
> +}
> +EXPORT_SYMBOL_GPL(snd_soc_usb_get_components_tag);
Is this used to expose some information to userspace?
Can those be some more readable strings if so, like:
usbplaybackoffload, usbcaptureoffload
(...)
> +
> + node = snd_soc_find_phandle(usbdev);
> + if (IS_ERR(node))
> + return -ENODEV;
> +
> + ctx = snd_soc_find_usb_ctx(node);
> + of_node_put(node);
> + if (!ctx)
> + return -ENODEV;
Perhaps introduce some helper function, you do this
snd_soc_find_phandle() followed by snd_soc_find_usb_ctx() in few places...
On 4/25/2024 11:51 PM, Wesley Cheng wrote:
> Introduce a helper to check if a particular PCM format is supported by the
> USB audio device connected. If the USB audio device does not have an
> audio profile which can support the requested format, then notify the USB
> backend.
>
> Signed-off-by: Wesley Cheng <[email protected]>
> ---
(...)
> +/**
> + * snd_soc_usb_find_format() - Check if audio format is supported
> + * @card_idx: USB sound chip array index
> + * @params: PCM parameters
> + * @direction: capture or playback
> + *
> + * Ensure that a requested audio profile from the ASoC side is able to be
> + * supported by the USB device.
> + *
> + * Return 0 on success, negative on error.
> + *
> + */
> +int snd_soc_usb_find_format(int card_idx, struct snd_pcm_hw_params *params,
> + int direction)
Perhaps name function similar to its snd_usb equivalent, so
snd_soc_usb_find_supported_format?
> +{
> + struct snd_usb_stream *as;
> +
> + as = snd_usb_find_suppported_substream(card_idx, params, direction);
> + if (!as)
> + return -EOPNOTSUPP;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(snd_soc_usb_find_format);
> +
> /**
> * snd_soc_usb_allocate_port() - allocate a SOC USB device
> * @component: USB DPCM backend DAI component
>
On 4/25/2024 11:50 PM, Wesley Cheng wrote:
> Some clients may operate only on a specific XHCI interrupter instance.
> Allow for the associated class driver to request for the interrupter that
> it requires.
>
> Signed-off-by: Wesley Cheng <[email protected]>
> ---
(...)
> -
> - /* Find available secondary interrupter, interrupter 0 is reserved for primary */
> + /* Find available secondary interrupter, interrupter 0 is reserverd for primary */
You introduce a typo in here.
Hi Amadeusz,
On 4/26/2024 6:24 AM, Amadeusz Sławiński wrote:
> On 4/25/2024 11:50 PM, Wesley Cheng wrote:
>> Some clients may operate only on a specific XHCI interrupter instance.
>> Allow for the associated class driver to request for the interrupter that
>> it requires.
>>
>> Signed-off-by: Wesley Cheng <[email protected]>
>> ---
>
> (...)
>
>> -
>> - /* Find available secondary interrupter, interrupter 0 is
>> reserved for primary */
>> + /* Find available secondary interrupter, interrupter 0 is
>> reserverd for primary */
>
> You introduce a typo in here.
Thanks for the review! Will fix it.
Thanks
Wesley Cheng
On 4/25/2024 11:51 PM, Wesley Cheng wrote:
> Expose API for creation of a jack control for notifying of available
> devices that are plugged in/discovered, and that support offloading. This
> allows for control names to be standardized across implementations of USB
> audio offloading.
>
> Signed-off-by: Wesley Cheng <[email protected]>
> ---
(...)
> /* SOC USB sound kcontrols */
> +/**
> + * snd_soc_usb_setup_offload_jack() - Create USB offloading jack
> + * @component: USB DPCM backend DAI component
> + * @jack: jack structure to create
> + *
> + * Creates a jack device for notifying userspace of the availability
> + * of an offload capable device.
> + *
> + * Returns 0 on success, negative on error.
> + *
> + */
> +int snd_soc_usb_setup_offload_jack(struct snd_soc_component *component,
> + struct snd_soc_jack *jack)
> +{
> + int ret;
> +
> + ret = snd_soc_card_jack_new(component->card, "USB Offload Playback Jack",
> + SND_JACK_HEADPHONE, jack);
> + if (ret < 0) {
> + dev_err(component->card->dev, "Unable to add USB offload jack\n");
> + return ret;
> + }
> +
> + ret = snd_soc_component_set_jack(component, jack, NULL);
> + if (ret) {
> + dev_warn(component->card->dev, "Failed to set jack: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(snd_soc_usb_setup_offload_jack);
> +
> static int snd_soc_usb_get_offload_card_status(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol)
> {
>
I'm not sure if this should be handled in generic USB API, this feels
like something that should be handled in specific device driver side,
like all users currently do.
Anyway I think there should also be some function that tears jack down,
by calling:
snd_soc_component_set_jack(component, NULL, NULL);
so it can get cleaned up properly?
Hi Amadeusz,
On 4/26/2024 6:25 AM, Amadeusz Sławiński wrote:
> On 4/25/2024 11:50 PM, Wesley Cheng wrote:
>> Some platforms may have support for offloading USB audio devices to a
>> dedicated audio DSP. Introduce a set of APIs that allow for
>> management of
>> USB sound card and PCM devices enumerated by the USB SND class driver.
>> This allows for the ASoC components to be aware of what USB devices are
>> available for offloading.
>>
>> Signed-off-by: Wesley Cheng <[email protected]>
>> ---
>
> (...)
>
>> +const char *snd_soc_usb_get_components_tag(bool playback)
>> +{
>> + if (playback)
>> + return "usbplybkoffld: 1";
>> + else
>> + return "usbcapoffld: 1";
>> +}
>> +EXPORT_SYMBOL_GPL(snd_soc_usb_get_components_tag);
>
> Is this used to expose some information to userspace?
> Can those be some more readable strings if so, like:
> usbplaybackoffload, usbcaptureoffload
>
Sure we can make it a bit more complete. Was trying to keep it short,
but if the intention isn't clear on the tag, then we can keep the full form.
> (...)
>
>> +
>> + node = snd_soc_find_phandle(usbdev);
>> + if (IS_ERR(node))
>> + return -ENODEV;
>> +
>> + ctx = snd_soc_find_usb_ctx(node);
>> + of_node_put(node);
>> + if (!ctx)
>> + return -ENODEV;
>
> Perhaps introduce some helper function, you do this
> snd_soc_find_phandle() followed by snd_soc_find_usb_ctx() in few places...
>
Will do. Will make a helper and replace instances with this.
Thanks
Wesley Cheng
Hi Amadeusz,
On 4/26/2024 6:25 AM, Amadeusz Sławiński wrote:
> On 4/25/2024 11:51 PM, Wesley Cheng wrote:
>> Introduce a helper to check if a particular PCM format is supported by
>> the
>> USB audio device connected. If the USB audio device does not have an
>> audio profile which can support the requested format, then notify the USB
>> backend.
>>
>> Signed-off-by: Wesley Cheng <[email protected]>
>> ---
>
> (...)
>
>> +/**
>> + * snd_soc_usb_find_format() - Check if audio format is supported
>> + * @card_idx: USB sound chip array index
>> + * @params: PCM parameters
>> + * @direction: capture or playback
>> + *
>> + * Ensure that a requested audio profile from the ASoC side is able
>> to be
>> + * supported by the USB device.
>> + *
>> + * Return 0 on success, negative on error.
>> + *
>> + */
>> +int snd_soc_usb_find_format(int card_idx, struct snd_pcm_hw_params
>> *params,
>> + int direction)
>
> Perhaps name function similar to its snd_usb equivalent, so
> snd_soc_usb_find_supported_format?
>
Will do.
Thanks
Wesley Cheng
On 26.4.2024 0.50, Wesley Cheng wrote:
> Depending on the interrupter use case, the OS may only be used to handle
> the interrupter event ring clean up. In these scenarios, event TRBs don't
> need to be handled by the OS, so introduce an xhci interrupter flag to tag
> if the events from an interrupter needs to be handled or not.
Could you elaborate on this a bit.
If I understood correctly the whole point of requesting a secondary xhci interrupter
for the sideband device without ever requesting a real interrupt for it was to avoid
waking up the cpu and calling the interrupt handler.
with this flag is seems the normal xhci interrupt handler does get called for
sideband transfer events.
>
> Signed-off-by: Wesley Cheng <[email protected]>
> ---
> drivers/usb/host/xhci-ring.c | 17 +++++++++++++----
> drivers/usb/host/xhci.h | 1 +
> 2 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 52278afea94b..6c7a21f522cd 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -2973,14 +2973,22 @@ static int handle_tx_event(struct xhci_hcd *xhci,
> }
>
> /*
> - * This function handles one OS-owned event on the event ring. It may drop
> - * xhci->lock between event processing (e.g. to pass up port status changes).
> + * This function handles one OS-owned event on the event ring, or ignores one event
> + * on interrupters which are non-OS owned. It may drop xhci->lock between event
> + * processing (e.g. to pass up port status changes).
> */
> static int xhci_handle_event_trb(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
> union xhci_trb *event)
> {
> u32 trb_type;
>
> + /*
> + * Some interrupters do not need to handle event TRBs, as they may be
> + * managed by another entity, but rely on the OS to clean up.
> + */
> + if (ir->skip_events)
> + return 0;
> +
I think we need another solution than a skip_events flag.
To make secondary xhci interrupters more useful in general it would make more
sense to add an interrupt handler function pointer to struct xhci_interrupter.
Then call that function instead of xhci_handle_event_trb()
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3098,8 +3098,8 @@ static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir
/* Process all OS owned event TRBs on this event ring */
while (unhandled_event_trb(ir->event_ring)) {
- err = xhci_handle_event_trb(xhci, ir, ir->event_ring->dequeue);
-
+ if (ir->handle_event_trb)
+ err = ir->handle_event_trb(xhci, ir, ir->event_ring->dequeue);
/*
* If half a segment of events have been handled in one go then
* update ERDP, and force isoc trbs to interrupt more often
The handler function would be passed to, and function pointer set in
xhci_create_secondary_interrupter()
For primary interrupter it would always be set to xhci_handle_event_trb()
Thanks
Mathias
Hi Mathias,
On 4/30/2024 4:02 AM, Mathias Nyman wrote:
> On 26.4.2024 0.50, Wesley Cheng wrote:
>> Depending on the interrupter use case, the OS may only be used to handle
>> the interrupter event ring clean up. In these scenarios, event TRBs
>> don't
>> need to be handled by the OS, so introduce an xhci interrupter flag to
>> tag
>> if the events from an interrupter needs to be handled or not.
>
> Could you elaborate on this a bit.
>
> If I understood correctly the whole point of requesting a secondary xhci
> interrupter
> for the sideband device without ever requesting a real interrupt for it
> was to avoid
> waking up the cpu and calling the interrupt handler.
>
Yes, this is the correct understanding. We don't currently register the
separate interrupt line (from GIC) for the secondary interrupter, so the
main apps proc doesn't get interrupted on events generated on the
secondary interrupter.
> with this flag is seems the normal xhci interrupt handler does get
> called for
> sideband transfer events.
>
Main intention was to utilize the refactoring you did to expose the
xhci_handle_event_trb() for both handling events on the main
interrupter, as well as the logic to skip events on the secondary
interrupter.
https://lore.kernel.org/linux-usb/[email protected]/
>>
>> Signed-off-by: Wesley Cheng <[email protected]>
>> ---
>> drivers/usb/host/xhci-ring.c | 17 +++++++++++++----
>> drivers/usb/host/xhci.h | 1 +
>> 2 files changed, 14 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
>> index 52278afea94b..6c7a21f522cd 100644
>> --- a/drivers/usb/host/xhci-ring.c
>> +++ b/drivers/usb/host/xhci-ring.c
>> @@ -2973,14 +2973,22 @@ static int handle_tx_event(struct xhci_hcd *xhci,
>> }
>> /*
>> - * This function handles one OS-owned event on the event ring. It may
>> drop
>> - * xhci->lock between event processing (e.g. to pass up port status
>> changes).
>> + * This function handles one OS-owned event on the event ring, or
>> ignores one event
>> + * on interrupters which are non-OS owned. It may drop xhci->lock
>> between event
>> + * processing (e.g. to pass up port status changes).
>> */
>> static int xhci_handle_event_trb(struct xhci_hcd *xhci, struct
>> xhci_interrupter *ir,
>> union xhci_trb *event)
>> {
>> u32 trb_type;
>> + /*
>> + * Some interrupters do not need to handle event TRBs, as they
>> may be
>> + * managed by another entity, but rely on the OS to clean up.
>> + */
>> + if (ir->skip_events)
>> + return 0;
>> +
>
> I think we need another solution than a skip_events flag.
>
> To make secondary xhci interrupters more useful in general it would make
> more
> sense to add an interrupt handler function pointer to struct
> xhci_interrupter.
>
> Then call that function instead of xhci_handle_event_trb()
>
I agree that is how it should be for when support for actually utilizing
secondary interrupters for routing events to different targets (instead
of offloading). However, since I don't have an existing use case that
will exercise this functionality, its a bit difficult to verify that it
should be working the way it was intended.
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -3098,8 +3098,8 @@ static int xhci_handle_events(struct xhci_hcd
> *xhci, struct xhci_interrupter *ir
>
> /* Process all OS owned event TRBs on this event ring */
> while (unhandled_event_trb(ir->event_ring)) {
> - err = xhci_handle_event_trb(xhci, ir,
> ir->event_ring->dequeue);
> -
> + if (ir->handle_event_trb)
> + err = ir->handle_event_trb(xhci, ir,
> ir->event_ring->dequeue);
> /*
> * If half a segment of events have been handled in one
> go then
> * update ERDP, and force isoc trbs to interrupt more
> often
>
> The handler function would be passed to, and function pointer set in
> xhci_create_secondary_interrupter()
>
> For primary interrupter it would always be set to xhci_handle_event_trb()
>
Yes, definitely agree with this for when we introduce support for
handling the secondary interrupter GIC line within the apps proc itself.
Would prefer if we took up that effort in another series, but willing
to go back to the skip events loop previously implemented if the above
change isn't where you want to go with this.
Thanks
Wesley Cheng
> Thanks
> Mathias
>
Hi Amadeusz,
On 4/26/2024 6:26 AM, Amadeusz Sławiński wrote:
> On 4/25/2024 11:51 PM, Wesley Cheng wrote:
>> Expose API for creation of a jack control for notifying of available
>> devices that are plugged in/discovered, and that support offloading.
>> This
>> allows for control names to be standardized across implementations of USB
>> audio offloading.
>>
>> Signed-off-by: Wesley Cheng <[email protected]>
>> ---
>
> (...)
>
>> /* SOC USB sound kcontrols */
>> +/**
>> + * snd_soc_usb_setup_offload_jack() - Create USB offloading jack
>> + * @component: USB DPCM backend DAI component
>> + * @jack: jack structure to create
>> + *
>> + * Creates a jack device for notifying userspace of the availability
>> + * of an offload capable device.
>> + *
>> + * Returns 0 on success, negative on error.
>> + *
>> + */
>> +int snd_soc_usb_setup_offload_jack(struct snd_soc_component *component,
>> + struct snd_soc_jack *jack)
>> +{
>> + int ret;
>> +
>> + ret = snd_soc_card_jack_new(component->card, "USB Offload
>> Playback Jack",
>> + SND_JACK_HEADPHONE, jack);
>> + if (ret < 0) {
>> + dev_err(component->card->dev, "Unable to add USB offload
>> jack\n");
>> + return ret;
>> + }
>> +
>> + ret = snd_soc_component_set_jack(component, jack, NULL);
>> + if (ret) {
>> + dev_warn(component->card->dev, "Failed to set jack: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(snd_soc_usb_setup_offload_jack);
>> +
>> static int snd_soc_usb_get_offload_card_status(struct snd_kcontrol
>> *kcontrol,
>> struct snd_ctl_elem_value *ucontrol)
>> {
>>
>
> I'm not sure if this should be handled in generic USB API, this feels
> like something that should be handled in specific device driver side,
> like all users currently do.
>
In some of the previous comments, it was mentioned that maybe it was
better to have more consistent/defined naming across devices that do
have support for audio offload. Initially, I did have these within our
vendor specific ASoC platform driver also.
> Anyway I think there should also be some function that tears jack down,
> by calling:
> snd_soc_component_set_jack(component, NULL, NULL);
> so it can get cleaned up properly?
I can add that. I didn't realize there were some situations where maybe
components would want to disable the jack. I will leave the cleanup
part to ASoC when the platform card is removed.
Thanks
Wesley Cheng
On 26.4.2024 0.50, Wesley Cheng wrote:
> Some use cases maybe require that the secondary interrupter's events to
> be handled by the OS. In this case, configure the IMOD and the
> skip_events property to enable the interrupter's events. By default,
> assume that the secondary interrupter doesn't want to enable OS event
> handling.
>
> Signed-off-by: Wesley Cheng <[email protected]>
> ---
> drivers/usb/host/xhci-sideband.c | 28 ++++++++++++++++++++++++++++
> include/linux/usb/xhci-sideband.h | 2 ++
> 2 files changed, 30 insertions(+)
>
> diff --git a/drivers/usb/host/xhci-sideband.c b/drivers/usb/host/xhci-sideband.c
> index 255feae33c6e..6fdae9840c11 100644
> --- a/drivers/usb/host/xhci-sideband.c
> +++ b/drivers/usb/host/xhci-sideband.c
> @@ -237,6 +237,30 @@ xhci_sideband_get_event_buffer(struct xhci_sideband *sb)
> }
> EXPORT_SYMBOL_GPL(xhci_sideband_get_event_buffer);
>
> +/**
> + * xhci_sideband_enable_interrupt - enable interrupt for secondary interrupter
> + * @sb: sideband instance for this usb device
> + * @imod_interval: number of event ring segments to allocate
> + *
> + * Enables OS owned event handling for a particular interrupter if client
> + * requests for it. In addition, set the IMOD interval for this particular
> + * interrupter.
> + *
> + * Returns 0 on success, negative error otherwise
> + */
> +int xhci_sideband_enable_interrupt(struct xhci_sideband *sb, u32 imod_interval)
> +{
> + if (!sb || !sb->ir)
> + return -ENODEV;
> +
> + xhci_set_interrupter_moderation(sb->ir, imod_interval);
Is there a need to adjust the moderation after initial setup?
If not then maybe we could pass the imod_interval as a parameter to
xhci_create_secondary_interrupter(), and avoid exporting
xhci_set_interrupter_moderation()
> + sb->ir->skip_events = false;
> + xhci_enable_interrupter(sb->ir);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(xhci_sideband_enable_interrupt);
I can't find the place where xhci_sideband_enable_interrupt() is called in
this series. How is it planned to be used?
Thanks
Mathias
Hi Mathias,
On 5/2/2024 4:07 AM, Mathias Nyman wrote:
> On 26.4.2024 0.50, Wesley Cheng wrote:
>> Some use cases maybe require that the secondary interrupter's events to
>> be handled by the OS. In this case, configure the IMOD and the
>> skip_events property to enable the interrupter's events. By default,
>> assume that the secondary interrupter doesn't want to enable OS event
>> handling.
>>
>> Signed-off-by: Wesley Cheng <[email protected]>
>> ---
>> drivers/usb/host/xhci-sideband.c | 28 ++++++++++++++++++++++++++++
>> include/linux/usb/xhci-sideband.h | 2 ++
>> 2 files changed, 30 insertions(+)
>>
>> diff --git a/drivers/usb/host/xhci-sideband.c
>> b/drivers/usb/host/xhci-sideband.c
>> index 255feae33c6e..6fdae9840c11 100644
>> --- a/drivers/usb/host/xhci-sideband.c
>> +++ b/drivers/usb/host/xhci-sideband.c
>> @@ -237,6 +237,30 @@ xhci_sideband_get_event_buffer(struct
>> xhci_sideband *sb)
>> }
>> EXPORT_SYMBOL_GPL(xhci_sideband_get_event_buffer);
>> +/**
>> + * xhci_sideband_enable_interrupt - enable interrupt for secondary
>> interrupter
>> + * @sb: sideband instance for this usb device
>> + * @imod_interval: number of event ring segments to allocate
>> + *
>> + * Enables OS owned event handling for a particular interrupter if
>> client
>> + * requests for it. In addition, set the IMOD interval for this
>> particular
>> + * interrupter.
>> + *
>> + * Returns 0 on success, negative error otherwise
>> + */
>> +int xhci_sideband_enable_interrupt(struct xhci_sideband *sb, u32
>> imod_interval)
>> +{
>> + if (!sb || !sb->ir)
>> + return -ENODEV;
>> +
>> + xhci_set_interrupter_moderation(sb->ir, imod_interval);
>
> Is there a need to adjust the moderation after initial setup?
>
> If not then maybe we could pass the imod_interval as a parameter to
> xhci_create_secondary_interrupter(), and avoid exporting
> xhci_set_interrupter_moderation()
>
>
Let me preface my comments by saying that I was trying to include some
aspects of enabling the secondary interrupter line within the main apps
proc. If this gets too confusing, I can remove these mechanisms for
now. For example, as you mentioned below
xhci_sideband_enable_interrupt() isn't going to be used in the offload path.
However, I decided to add it so we can have some corresponding function
that will utilize/set skip_events = false. (as it is "true" by default)
Again, I can remove this part and revisit later when we actually have a
use case to handle secondary interrupts on apps.
As for the IMOD setting, depending on what you think, I can add it as
part of xhci_create_secondary_interrupter()
>> + sb->ir->skip_events = false;
>> + xhci_enable_interrupter(sb->ir);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(xhci_sideband_enable_interrupt);
>
> I can't find the place where xhci_sideband_enable_interrupt() is called in
> this series. How is it planned to be used?
>
> Thanks
> Mathias
Thanks
Wesley Cheng