2023-07-27 10:39:33

by Pin-yen Lin

Subject: [PATCH] drm/bridge: it6505: Check power state with it6505->powered in IRQ handler

On system resume, the driver might call it6505_poweron directly if the
runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
will always return 0 because dev->power.runtime_status stays at
RPM_SUSPENDED, and the IRQ will never be handled.

Use it6505->powered from the driver struct fixes this because it always
gets updated when it6505_poweron is called.

Fixes: 5eb9a4314053 ("drm/bridge: it6505: Guard bridge power in IRQ handler")
Signed-off-by: Pin-yen Lin <[email protected]>

---

drivers/gpu/drm/bridge/ite-it6505.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 6c2fcd8b8780..2f300f5ca051 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -2517,9 +2517,11 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
};
int int_status[3], i;

- if (it6505->enable_drv_hold || pm_runtime_get_if_in_use(dev) <= 0)
+ if (it6505->enable_drv_hold || !it6505->powered)
return IRQ_HANDLED;

+ pm_runtime_get_sync(dev);
+
int_status[0] = it6505_read(it6505, INT_STATUS_01);
int_status[1] = it6505_read(it6505, INT_STATUS_02);
int_status[2] = it6505_read(it6505, INT_STATUS_03);
--
2.41.0.487.g6d72f3e995-goog

2023-08-01 11:25:18

by Neil Armstrong

Subject: Re: [PATCH] drm/bridge: it6505: Check power state with it6505->powered in IRQ handler

On 27/07/2023 12:01, Pin-yen Lin wrote:
> On system resume, the driver might call it6505_poweron directly if the
> runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
> will always return 0 because dev->power.runtime_status stays at
> RPM_SUSPENDED, and the IRQ will never be handled.
>
> Use it6505->powered from the driver struct fixes this because it always
> gets updated when it6505_poweron is called.
>
> Fixes: 5eb9a4314053 ("drm/bridge: it6505: Guard bridge power in IRQ handler")
> Signed-off-by: Pin-yen Lin <[email protected]>
>
> ---
>
> drivers/gpu/drm/bridge/ite-it6505.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
> index 6c2fcd8b8780..2f300f5ca051 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -2517,9 +2517,11 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
> };
> int int_status[3], i;
>
> - if (it6505->enable_drv_hold || pm_runtime_get_if_in_use(dev) <= 0)
> + if (it6505->enable_drv_hold || !it6505->powered)
> return IRQ_HANDLED;
>
> + pm_runtime_get_sync(dev);
> +
> int_status[0] = it6505_read(it6505, INT_STATUS_01);
> int_status[1] = it6505_read(it6505, INT_STATUS_02);
> int_status[2] = it6505_read(it6505, INT_STATUS_03);

Reviewed-by: Neil Armstrong <[email protected]>

2023-08-03 08:59:18

by Neil Armstrong

Subject: Re: [PATCH] drm/bridge: it6505: Check power state with it6505->powered in IRQ handler

Hi,

On Thu, 27 Jul 2023 18:01:10 +0800, Pin-yen Lin wrote:
> On system resume, the driver might call it6505_poweron directly if the
> runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
> will always return 0 because dev->power.runtime_status stays at
> RPM_SUSPENDED, and the IRQ will never be handled.
>
> Use it6505->powered from the driver struct fixes this because it always
> gets updated when it6505_poweron is called.
>
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-fixes)

[1/1] drm/bridge: it6505: Check power state with it6505->powered in IRQ handler
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=e9d699af3f65d62cf195f0e7a039400093ab2af2

--
Neil