This series adds the initial (clocks, pinctrl, rpmhpd, regulator, interconnect,
CPU, SoC and board compatibles) device tree support to boot to shell on the
Qualcomm SC8380XP platform, aka Snapdragon X Elite.
Dependencies:
clks: https://lore.kernel.org/lkml/[email protected]/
interconnect: https://lore.kernel.org/lkml/[email protected]/
llcc: https://lore.kernel.org/lkml/[email protected]/
misc-bindings: https://lore.kernel.org/lkml/[email protected]/
pinctrl: https://lore.kernel.org/lkml/[email protected]/
regulators: https://lore.kernel.org/lkml/[email protected]/
rpmhpd: https://lore.kernel.org/lkml/[email protected]/
Release Link: https://www.qualcomm.com/news/releases/2023/10/qualcomm-unleashes-snapdragon-x-elite--the-ai-super-charged-plat
Abel Vesa (1):
arm64: dts: qcom: sc8380xp: Add Compute Reference Device
Rajendra Nayak (4):
dt-bindings: arm: cpus: Add qcom,oryon compatible
dt-bindings: arm: qcom: Document SC8380XP SoC and boards
arm64: dts: qcom: Add base SC8380XP dtsi and the QCP dts
arm64: defconfig: Enable SC8380XP SoC base configs
.../devicetree/bindings/arm/cpus.yaml | 1 +
.../devicetree/bindings/arm/qcom.yaml | 8 +
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/sc8380xp-crd.dts | 423 +++
arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts | 398 ++
arch/arm64/boot/dts/qcom/sc8380xp.dtsi | 3267 +++++++++++++++++
arch/arm64/configs/defconfig | 3 +
7 files changed, 4102 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp-crd.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp.dtsi
--
2.17.1
From: Rajendra Nayak <[email protected]>
These are the CPU cores in Qualcomm's SC8380XP SoC.
Signed-off-by: Rajendra Nayak <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
Documentation/devicetree/bindings/arm/cpus.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index ffd526363fda..cc5a21b47e26 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -198,6 +198,7 @@ properties:
- qcom,kryo660
- qcom,kryo685
- qcom,kryo780
+ - qcom,oryon
- qcom,scorpion
enable-method:
--
2.17.1
From: Abel Vesa <[email protected]>
Add basic support for SC8380XP CRD board dts, which allows it to boot
to a shell.
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Rajendra Nayak <[email protected]>
Co-developed-by: Sibi Sankar <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sc8380xp-crd.dts | 423 ++++++++++++++++++++++
2 files changed, 424 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp-crd.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 48d0f2063f3c..e1e8b89ca311 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -167,6 +167,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc8380xp-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8380xp-qcp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8380xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8380xp-crd.dts
new file mode 100644
index 000000000000..323a701916cd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8380xp-crd.dts
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8380xp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SC8380XP CRD";
+ compatible = "qcom,sc8380xp-crd", "qcom,sc8380xp";
+
+ aliases {
+ serial0 = &uart21;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l4-supply = <&vreg_s4c_1p8>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, <44 4>, <238 1>;
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+};
+
+&uart21 {
+ status = "okay";
+};
--
2.17.1
From: Rajendra Nayak <[email protected]>
Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
SC8380XP SoC, describing the CPUs, GCC and RPMHCC clock controllers,
geni UART, interrupt controller, TLMM, reserved memory, interconnects,
SMMU and LLCC nodes.
Co-developed-by: Abel Vesa <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Rajendra Nayak <[email protected]>
Co-developed-by: Sibi Sankar <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts | 398 +++
arch/arm64/boot/dts/qcom/sc8380xp.dtsi | 3267 +++++++++++++++++++++
3 files changed, 3666 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d6cb840b7050..48d0f2063f3c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -167,6 +167,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc8380xp-qcp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts b/arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts
new file mode 100644
index 000000000000..4eb107fa178c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8380xp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SC8380XP QCP";
+ compatible = "qcom,sc8380xp-qcp", "qcom,sc8380xp";
+
+ aliases {
+ serial0 = &uart21;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l4-supply = <&vreg_s4c_1p8>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vph_pwr>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vph_pwr>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <33 3>, <44 4>, <238 1>;
+};
+
+&uart21 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8380xp.dtsi b/arch/arm64/boot/dts/qcom/sc8380xp.dtsi
new file mode 100644
index 000000000000..ac3d674502d2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8380xp.dtsi
@@ -0,0 +1,3267 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8380xp-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,sc8380xp-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ clock-frequency = <76800000>;
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ bi_tcxo_div2: bi-tcxo-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L1_0>;
+
+ L1_0: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_0>;
+
+ L2_0: l2-cache-0 {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L1_1>;
+
+ L1_1: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L1_2>;
+
+ L1_2: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L1_3>;
+
+ L1_3: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ CPU4: cpu@10000 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10000>;
+ enable-method = "psci";
+ next-level-cache = <&L1_4>;
+
+ L1_4: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_1>;
+
+ L2_1: l2-cache-1 {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU5: cpu@10100 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10100>;
+ enable-method = "psci";
+ next-level-cache = <&L1_5>;
+
+ L1_5: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_1>;
+ };
+ };
+
+ CPU6: cpu@10200 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10200>;
+ enable-method = "psci";
+ next-level-cache = <&L1_6>;
+
+ L1_6: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_1>;
+ };
+ };
+
+ CPU7: cpu@10300 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x10300>;
+ enable-method = "psci";
+ next-level-cache = <&L1_7>;
+
+ L1_7: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_1>;
+ };
+ };
+
+ CPU8: cpu@20000 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20000>;
+ enable-method = "psci";
+ next-level-cache = <&L1_8>;
+
+ L1_8: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_2>;
+
+ L2_2: l2-cache-2 {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU9: cpu@20100 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20100>;
+ enable-method = "psci";
+ next-level-cache = <&L1_9>;
+
+ L1_9: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_2>;
+ };
+ };
+
+ CPU10: cpu@20200 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20200>;
+ enable-method = "psci";
+ next-level-cache = <&L1_10>;
+
+ L1_10: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_2>;
+ };
+ };
+
+ CPU11: cpu@20300 {
+ device_type = "cpu";
+ compatible = "qcom,oryon";
+ reg = <0x0 0x20300>;
+ enable-method = "psci";
+ next-level-cache = <&L1_11>;
+
+ L1_11: l1-cache {
+ compatible = "cache";
+ next-level-cache = <&L2_2>;
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+
+ cluster2 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+
+ core1 {
+ cpu = <&CPU9>;
+ };
+
+ core2 {
+ cpu = <&CPU10>;
+ };
+
+ core3 {
+ cpu = <&CPU11>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-sc8380xp", "qcom,scm";
+ };
+ };
+
+ clk_virt: interconnect-0 {
+ compatible = "qcom,sc8380xp-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect-1 {
+ compatible = "qcom,sc8380xp-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0x80000000 0 0x80000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gunyah_hyp_mem: gunyah-hyp-region@80000000 {
+ reg = <0x0 0x80000000 0x0 0x800000>;
+ no-map;
+ };
+
+ hyp_elf_package_mem: hyp-elf_package-region@80800000 {
+ reg = <0x0 0x80800000 0x0 0x200000>;
+ no-map;
+ };
+
+ ncc_mem: ncc-region@80a00000 {
+ reg = <0x0 0x80a00000 0x0 0x400000>;
+ no-map;
+ };
+
+ cpucp_log_mem: cpucp-log-region@80e00000 {
+ reg = <0x0 0x80e00000 0x0 0x40000>;
+ no-map;
+ };
+
+ cpucp_mem: cpucp-region@80e40000 {
+ reg = <0x0 0x80e40000 0x0 0x540000>;
+ no-map;
+ };
+
+ reserved_mem: reserved-region@81380000 {
+ reg = <0x0 0x81380000 0x0 0x80000>;
+ no-map;
+ };
+
+ tags_mem: tags-region@81400000 {
+ reg = <0x0 0x81400000 0x0 0x1a0000>;
+ no-map;
+ };
+
+ xbl_dtlog_mem: xbl-dtlog-region@81a00000 {
+ reg = <0x0 0x81a00000 0x0 0x40000>;
+ no-map;
+ };
+
+ xbl_ramdump_mem: xbl-ramdump-region@81a40000 {
+ reg = <0x0 0x81a40000 0x0 0x1c0000>;
+ no-map;
+ };
+
+ aop_image_mem: aop-image-region@81c00000 {
+ reg = <0x0 0x81c00000 0x0 0x60000>;
+ no-map;
+ };
+
+ aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+ compatible = "qcom,cmd-db";
+ reg = <0x0 0x81c60000 0x0 0x20000>;
+ no-map;
+ };
+
+ aop_config_mem: aop-config-region@81c80000 {
+ reg = <0x0 0x81c80000 0x0 0x20000>;
+ no-map;
+ };
+
+ tme_crash_dump_mem: tme-crash-dump-region@81ca0000 {
+ reg = <0x0 0x81ca0000 0x0 0x40000>;
+ no-map;
+ };
+
+ tme_log_mem: tme-log-region@81ce0000 {
+ reg = <0x0 0x81ce0000 0x0 0x4000>;
+ no-map;
+ };
+
+ uefi_log_mem: uefi-log-region@81ce4000 {
+ reg = <0x0 0x81ce4000 0x0 0x10000>;
+ no-map;
+ };
+
+ secdata_apss_mem: secdata-apss-region@81cff000 {
+ reg = <0x0 0x81cff000 0x0 0x1000>;
+ no-map;
+ };
+
+ pdp_ns_shared_mem: pdp-ns-shared-region@81e00000 {
+ reg = <0x0 0x81e00000 0x0 0x100000>;
+ no-map;
+ };
+
+ gpu_prr_mem: gpu-prr-region@81f00000 {
+ reg = <0x0 0x81f00000 0x0 0x10000>;
+ no-map;
+ };
+
+ tpm_control_mem: tpm-control-region@81f10000 {
+ reg = <0x0 0x81f10000 0x0 0x10000>;
+ no-map;
+ };
+
+ usb_ucsi_shared_mem: usb-ucsi-shared-region@81f20000 {
+ reg = <0x0 0x81f20000 0x0 0x10000>;
+ no-map;
+ };
+
+ pld_pep_mem: pld-pep-region@81f30000 {
+ reg = <0x0 0x81f30000 0x0 0x6000>;
+ no-map;
+ };
+
+ pld_gmu_mem: pld-gmu-region@81f36000 {
+ reg = <0x0 0x81f36000 0x0 0x1000>;
+ no-map;
+ };
+
+ pld_pdp_mem: pld-pdp-region@81f37000 {
+ reg = <0x0 0x81f37000 0x0 0x1000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat-region@82700000 {
+ reg = <0x0 0x82700000 0x0 0x100000>;
+ no-map;
+ };
+
+ xbl_tmp_buffer_mem: xbl-tmp-buffer-region@82800000 {
+ reg = <0x0 0x82800000 0x0 0xc00000>;
+ no-map;
+ };
+
+ adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap-region@84b00000 {
+ reg = <0x0 0x84b00000 0x0 0x800000>;
+ no-map;
+ };
+
+ spu_secure_shared_memory_mem: spu-secure-shared-memory-region@85300000 {
+ reg = <0x0 0x85300000 0x0 0x80000>;
+ no-map;
+ };
+
+ adsp_boot_dtb_mem: adsp-boot-dtb-region@866c0000 {
+ reg = <0x0 0x866c0000 0x0 0x40000>;
+ no-map;
+ };
+
+ spss_region_mem: spss-region-region@86700000 {
+ reg = <0x0 0x86700000 0x0 0x400000>;
+ no-map;
+ };
+
+ adsp_boot_mem: adsp-boot-region@86b00000 {
+ reg = <0x0 0x86b00000 0x0 0xc00000>;
+ no-map;
+ };
+
+ video_mem: video-region@87700000 {
+ reg = <0x0 0x87700000 0x0 0x700000>;
+ no-map;
+ };
+
+ adspslpi_mem: adspslpi-region@87e00000 {
+ reg = <0x0 0x87e00000 0x0 0x3a00000>;
+ no-map;
+ };
+
+ q6_adsp_dtb_mem: q6-adsp-dtb-region@8b800000 {
+ reg = <0x0 0x8b800000 0x0 0x80000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp-region@8b900000 {
+ reg = <0x0 0x8b900000 0x0 0x2000000>;
+ no-map;
+ };
+
+ q6_cdsp_dtb_mem: q6-cdsp-dtb-region@8d900000 {
+ reg = <0x0 0x8d900000 0x0 0x80000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode-region@8d9fe000 {
+ reg = <0x0 0x8d9fe000 0x0 0x2000>;
+ no-map;
+ };
+
+ cvp_mem: cvp-region@8da00000 {
+ reg = <0x0 0x8da00000 0x0 0x700000>;
+ no-map;
+ };
+
+ camera_mem: camera-region@8e100000 {
+ reg = <0x0 0x8e100000 0x0 0x800000>;
+ no-map;
+ };
+
+ av1_encoder_mem: av1-encoder-region@8e900000 {
+ reg = <0x0 0x8e900000 0x0 0x700000>;
+ no-map;
+ };
+
+ reserved_mem1: reserved-region@8f000000 {
+ reg = <0x0 0x8f000000 0x0 0xa00000>;
+ no-map;
+ };
+
+ wpss_mem: wpss-region@8fa00000 {
+ reg = <0x0 0x8fa00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ q6_wpss_dtb_mem: q6-wpss-dtb-region@91300000 {
+ reg = <0x0 0x91300000 0x0 0x80000>;
+ no-map;
+ };
+
+ xbl_sc_mem: xbl-sc-region@d8000000 {
+ reg = <0x0 0xd8000000 0x0 0x40000>;
+ no-map;
+ };
+
+ reserved_mem2: reserved-region@d8040000 {
+ reg = <0x0 0xd8040000 0x0 0xa0000>;
+ no-map;
+ };
+
+ qtee_mem: qtee-region@d80e0000 {
+ reg = <0x0 0xd80e0000 0x0 0x520000>;
+ no-map;
+ };
+
+ ta_mem: ta-region@d8600000 {
+ reg = <0x0 0xd8600000 0x0 0x8a00000>;
+ no-map;
+ };
+
+ tags_mem1: tags-region@e1000000 {
+ reg = <0x0 0xe1000000 0x0 0x26a0000>;
+ no-map;
+ };
+
+ llcc_lpi_mem: llcc-lpi-region@ff800000 {
+ reg = <0x0 0xff800000 0x0 0x600000>;
+ no-map;
+ };
+
+ smem_mem: smem-region@ffe00000 {
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges = <0 0 0 0 0x10 0>;
+ ranges = <0 0 0 0 0x10 0>;
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,sc8380xp-gcc";
+ reg = <0 0x100000 0 0x200000>;
+
+ clocks = <&bi_tcxo_div2>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ gpi_dma2: dma-controller@800000 {
+ compatible = "qcom,sc8380xp-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00800000 0 0x60000>;
+
+ interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3e>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x436 0x0>;
+
+ status = "disabled";
+ };
+
+ qupv3_2: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x423 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c16: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+
+ interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c16_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi16: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00880000 0 0x4000>;
+
+ interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c17: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+
+ interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c17_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi17: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00884000 0 0x4000>;
+
+ interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c18: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+
+ interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c18_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi18: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00888000 0 0x4000>;
+
+ interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c19: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c19_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi19: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c20: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c20_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi20: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c21: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c21_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi21: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart21: serial@894000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart21_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c22: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00898000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c22_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi22: spi@898000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00898000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c23: i2c@89c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0089c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c23_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi23: spi@89c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0089c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sc8380xp-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00a00000 0 0x60000>;
+
+ interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3e>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x136 0x0>;
+
+ status = "disabled";
+ };
+
+ qupv3_1: geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00ac0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x123 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c8_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi8: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c9_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi9: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c10_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi10: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c11_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi11: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c12_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi12: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c13: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c13_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi13: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c14: i2c@a98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c14_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi14: spi@a98000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c15: i2c@a9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c15_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi15: spi@a9c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ gpi_dma0: dma-controller@b00000 {
+ compatible = "qcom,sc8380xp-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00b00000 0 0x60000>;
+
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0x3e>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0x456 0x0>;
+
+ status = "disabled";
+ };
+
+ qupv3_0: geniqup@bc0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00bc0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ iommus = <&apps_smmu 0x443 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c0: i2c@b80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0xb80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c0_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi0: spi@b80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c@b84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi1: spi@b84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c@b88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi2: spi@b88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0xb88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@b8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi3: spi@b8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@b90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0xb90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi4: spi@b90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c5: i2c@b94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi5: spi@b94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c6: i2c@b98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi6: spi@b98000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c7: i2c@b9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00b9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c7_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi7: spi@b9c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00b9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ cnoc_main: interconnect@1500000 {
+ compatible = "qcom,sc8380xp-cnoc-main";
+ reg = <0 0x1500000 0 0x14400>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ config_noc: interconnect@1600000 {
+ compatible = "qcom,sc8380xp-cnoc-cfg";
+ reg = <0 0x1600000 0 0x6600>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ system_noc: interconnect@1680000 {
+ compatible = "qcom,sc8380xp-system-noc";
+ reg = <0 0x1680000 0 0x1c080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_south_anoc: interconnect@16c0000 {
+ compatible = "qcom,sc8380xp-pcie-south-anoc";
+ reg = <0 0x16c0000 0 0xd080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_center_anoc: interconnect@16d0000 {
+ compatible = "qcom,sc8380xp-pcie-center-anoc";
+ reg = <0 0x16d0000 0 0x7000>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre1_noc: interconnect@16e0000 {
+ compatible = "qcom,sc8380xp-aggre1-noc";
+ reg = <0 0x16E0000 0 0x14400>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre2_noc: interconnect@1700000 {
+ compatible = "qcom,sc8380xp-aggre2-noc";
+ reg = <0 0x1700000 0 0x1c400>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_north_anoc: interconnect@1740000 {
+ compatible = "qcom,sc8380xp-pcie-north-anoc";
+ reg = <0 0x1740000 0 0x9080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ usb_center_anoc: interconnect@1750000 {
+ compatible = "qcom,sc8380xp-usb-center-anoc";
+ reg = <0 0x1750000 0 0x8800>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ usb_north_anoc: interconnect@1760000 {
+ compatible = "qcom,sc8380xp-usb-north-anoc";
+ reg = <0 0x1760000 0 0x7080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ usb_south_anoc: interconnect@1770000 {
+ compatible = "qcom,sc8380xp-usb-south-anoc";
+ reg = <0 0x1770000 0 0xf080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ mmss_noc: interconnect@1780000 {
+ compatible = "qcom,sc8380xp-mmss-noc";
+ reg = <0 0x1780000 0 0x5B800>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ gem_noc: interconnect@26400000 {
+ compatible = "qcom,sc8380xp-gem-noc";
+ reg = <0 0x26400000 0 0x311200>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ nsp_noc: interconnect@320c0000 {
+ compatible = "qcom,sc8380xp-nsp-noc";
+ reg = <0 0x320C0000 0 0xE080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ lpass_ag_noc: interconnect@7e40000 {
+ compatible = "qcom,sc8380xp-lpass-ag-noc";
+ reg = <0 0x7e40000 0 0xE080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ lpass_lpiaon_noc: interconnect@7400000 {
+ compatible = "qcom,sc8380xp-lpass-lpiaon-noc";
+ reg = <0 0x7400000 0 0x19080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ lpass_lpicx_noc: interconnect@7430000 {
+ compatible = "qcom,sc8380xp-lpass-lpicx-noc";
+ reg = <0 0x7430000 0 0x3A200>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sc8380xp-tlmm";
+ reg = <0 0x0f100000 0 0xf00000>;
+
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-ranges = <&tlmm 0 0 239>;
+
+ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio0", "gpio1";
+ function = "qup0_se0";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio4", "gpio5";
+ function = "qup0_se1";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio8", "gpio9";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio12", "gpio13";
+ function = "qup0_se3";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio16", "gpio17";
+ function = "qup0_se4";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio20", "gpio21";
+ function = "qup0_se5";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio24", "gpio25";
+ function = "qup0_se6";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio14", "gpio15";
+ function = "qup0_se7";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio32", "gpio33";
+ function = "qup1_se0";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio36", "gpio37";
+ function = "qup1_se1";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio40", "gpio41";
+ function = "qup1_se2";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio44", "gpio45";
+ function = "qup1_se3";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio48", "gpio49";
+ function = "qup1_se4";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio52", "gpio53";
+ function = "qup1_se5";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio56", "gpio57";
+ function = "qup1_se6";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio54", "gpio55";
+ function = "qup1_se7";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio64", "gpio65";
+ function = "qup2_se0";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio68", "gpio69";
+ function = "qup2_se1";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio72", "gpio73";
+ function = "qup2_se2";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio76", "gpio77";
+ function = "qup2_se3";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio80", "gpio81";
+ function = "qup2_se4";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio84", "gpio85";
+ function = "qup2_se5";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c22_data_clk: qup-i2c22-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio88", "gpio89";
+ function = "qup2_se6";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_i2c23_data_clk: qup-i2c23-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio86", "gpio87";
+ function = "qup2_se7";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ qup_spi0_cs: qup-spi0-cs-state {
+ pins = "gpio3";
+ function = "qup0_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi0_data_clk: qup-spi0-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio0", "gpio1", "gpio2";
+ function = "qup0_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_cs: qup-spi1-cs-state {
+ pins = "gpio7";
+ function = "qup0_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_data_clk: qup-spi1-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio4", "gpio5", "gpio6";
+ function = "qup0_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_cs: qup-spi2-cs-state {
+ pins = "gpio11";
+ function = "qup0_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio8", "gpio9", "gpio10";
+ function = "qup0_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi3_cs: qup-spi3-cs-state {
+ pins = "gpio15";
+ function = "qup0_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi3_data_clk: qup-spi3-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio12", "gpio13", "gpio14";
+ function = "qup0_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi4_cs: qup-spi4-cs-state {
+ pins = "gpio19";
+ function = "qup0_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi4_data_clk: qup-spi4-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio16", "gpio17", "gpio18";
+ function = "qup0_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_cs: qup-spi5-cs-state {
+ pins = "gpio23";
+ function = "qup0_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_data_clk: qup-spi5-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio20", "gpio21", "gpio22";
+ function = "qup0_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_cs: qup-spi6-cs-state {
+ pins = "gpio27";
+ function = "qup0_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio24", "gpio25", "gpio26";
+ function = "qup0_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi7_cs: qup-spi7-cs-state {
+ pins = "gpio13";
+ function = "qup0_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi7_data_clk: qup-spi7-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio14", "gpio15", "gpio12";
+ function = "qup0_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_cs: qup-spi8-cs-state {
+ pins = "gpio35";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_data_clk: qup-spi8-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio32", "gpio33", "gpio34";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi9_cs: qup-spi9-cs-state {
+ pins = "gpio39";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi9_data_clk: qup-spi9-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio36", "gpio37", "gpio38";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi10_cs: qup-spi10-cs-state {
+ pins = "gpio43";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi10_data_clk: qup-spi10-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio40", "gpio41", "gpio42";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi11_cs: qup-spi11-cs-state {
+ pins = "gpio47";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi11_data_clk: qup-spi11-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio44", "gpio45", "gpio46";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi12_cs: qup-spi12-cs-state {
+ pins = "gpio51";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi12_data_clk: qup-spi12-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio48", "gpio49", "gpio50";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi13_cs: qup-spi13-cs-state {
+ pins = "gpio55";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi13_data_clk: qup-spi13-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio52", "gpio53", "gpio54";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi14_cs: qup-spi14-cs-state {
+ pins = "gpio59";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi14_data_clk: qup-spi14-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio56", "gpio57", "gpio58";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi15_cs: qup-spi15-cs-state {
+ pins = "gpio53";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi15_data_clk: qup-spi15-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio54", "gpio55", "gpio52";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi16_cs: qup-spi16-cs-state {
+ pins = "gpio67";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi16_data_clk: qup-spi16-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio64", "gpio65", "gpio66";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi17_cs: qup-spi17-cs-state {
+ pins = "gpio71";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi17_data_clk: qup-spi17-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio68", "gpio69", "gpio70";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi18_cs: qup-spi18-cs-state {
+ pins = "gpio75";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi18_data_clk: qup-spi18-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio72", "gpio73", "gpio74";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_cs: qup-spi19-cs-state {
+ pins = "gpio79";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_data_clk: qup-spi19-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio76", "gpio77", "gpio78";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi20_cs: qup-spi20-cs-state {
+ pins = "gpio83";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi20_data_clk: qup-spi20-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio80", "gpio81", "gpio82";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi21_cs: qup-spi21-cs-state {
+ pins = "gpio87";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi21_data_clk: qup-spi21-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio84", "gpio85", "gpio86";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi22_cs: qup-spi22-cs-state {
+ pins = "gpio91";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi22_data_clk: qup-spi22-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio88", "gpio89", "gpio90";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi23_cs: qup-spi23-cs-state {
+ pins = "gpio85";
+ function = "qup2_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi23_data_clk: qup-spi23-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio86", "gpio87", "gpio84";
+ function = "qup2_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_uart21_default: qup-uart21-default-state {
+ /* TX, RX */
+ pins = "gpio86", "gpio87";
+ function = "qup2_se5";
+ drive-strength= <2>;
+ bias-disable;
+ };
+ };
+
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sc8380xp-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+ reg = <0 0x15000000 0 0x100000>;
+
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ };
+
+ intc: interrupt-controller@17000000 {
+ compatible = "arm,gic-v3";
+ reg = <0 0x17000000 0 0x10000>, /* GICD */
+ <0 0x17080000 0 0x480000>; /* GICR * 12 */
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ #interrupt-cells = <3>;
+ interrupt-controller;
+
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x40000>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic_its: msi-controller@17040000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0 0x17040000 0 0x40000>;
+
+ msi-controller;
+ #msi-cells = <1>;
+
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17500000 {
+ compatible = "qcom,rpmh-rsc";
+ reg = <0 0x17500000 0 0x10000>,
+ <0 0x17510000 0 0x10000>,
+ <0 0x17520000 0 0x10000>;
+ reg-names = "drv-0", "drv-1", "drv-2";
+ qcom,drv-count = <3>;
+
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <2>;
+ qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>,
+ <WAKE_TCS 2>, <CONTROL_TCS 0>;
+
+ label = "apps_rsc";
+
+ apps_bcm_voter: bcm-voter {
+ compatible = "qcom,bcm-voter";
+ };
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sc8380xp-rpmh-clk";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ #clock-cells = <1>;
+ };
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sc8380xp-rpmhpd";
+
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ #power-domain-cells = <1>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp-16 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp-48 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs_d2: opp-52 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+ };
+
+ rpmhpd_opp_low_svs_d1: opp-56 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+ };
+
+ rpmhpd_opp_low_svs_d0: opp-60 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+ };
+
+ rpmhpd_opp_low_svs: opp-64 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_low_svs_l1: opp-80 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ rpmhpd_opp_svs: opp-128 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l0: opp-144 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ rpmhpd_opp_svs_l1: opp-192 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp-256 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp-320 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp-336 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp-384 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp-416 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+ };
+
+ timer@17800000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0 0x17800000 0 0x1000>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ frame@17801000 {
+ reg = <0 0x17801000 0 0x1000>,
+ <0 0x17802000 0 0x1000>;
+
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <0>;
+ };
+
+ frame@17803000 {
+ reg = <0 0x17803000 0 0x1000>;
+
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <1>;
+
+ status = "disabled";
+ };
+
+ frame@17805000 {
+ reg = <0 0x17805000 0 0x1000>;
+
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <2>;
+
+ status = "disabled";
+ };
+
+ frame@17807000 {
+ reg = <0 0x17807000 0 0x1000>;
+
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <3>;
+
+ status = "disabled";
+ };
+
+ frame@17809000 {
+ reg = <0 0x17809000 0 0x1000>;
+
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <4>;
+
+ status = "disabled";
+ };
+
+ frame@1780b000 {
+ reg = <0 0x1780b000 0 0x1000>;
+
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <5>;
+
+ status = "disabled";
+ };
+
+ frame@1780d000 {
+ reg = <0 0x1780d000 0 0x1000>;
+
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+ frame-number = <6>;
+
+ status = "disabled";
+ };
+ };
+
+ system-cache-controller@25000000 {
+ compatible = "qcom,sc8380xp-llcc";
+ reg = <0 0x25000000 0 0x200000>,
+ <0 0x25200000 0 0x200000>,
+ <0 0x25400000 0 0x200000>,
+ <0 0x25600000 0 0x200000>,
+ <0 0x25800000 0 0x200000>,
+ <0 0x25a00000 0 0x200000>,
+ <0 0x25c00000 0 0x200000>,
+ <0 0x25e00000 0 0x200000>,
+ <0 0x26000000 0 0x200000>;
+ reg-names = "llcc0_base",
+ "llcc1_base",
+ "llcc2_base",
+ "llcc3_base",
+ "llcc4_base",
+ "llcc5_base",
+ "llcc6_base",
+ "llcc7_base",
+ "llcc_broadcast_base";
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
--
2.17.1
From: Rajendra Nayak <[email protected]>
Document the SC8380XP SoC binding and also the boards using it.
Also document the new board id qcp (Qualcomm Compute Platform).
Signed-off-by: Rajendra Nayak <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 88b84035e7b1..6145e9ad340c 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -62,6 +62,7 @@ description: |
sc7280
sc8180x
sc8280xp
+ sc8380xp
sda660
sdm450
sdm630
@@ -110,6 +111,7 @@ description: |
liquid
rdp432-c2
mtp
+ qcp
qrd
rb2
ride
@@ -1044,6 +1046,12 @@ properties:
- qcom,sm8550-qrd
- const: qcom,sm8550
+ - items:
+ - enum:
+ - qcom,sc8380xp-crd
+ - qcom,sc8380xp-qcp
+ - const: qcom,sc8380xp
+
# Board compatibles go above
qcom,msm-id:
--
2.17.1
From: Rajendra Nayak <[email protected]>
Enable GCC, Pinctrl and Interconnect configs for SC8380XP needed to boot
to a console shell.
Signed-off-by: Rajendra Nayak <[email protected]>
Signed-off-by: Sibi Sankar <[email protected]>
---
arch/arm64/configs/defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 509084d35bef..78d9a21118c6 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -595,6 +595,7 @@ CONFIG_PINCTRL_SC7280=y
CONFIG_PINCTRL_SC7280_LPASS_LPI=m
CONFIG_PINCTRL_SC8180X=y
CONFIG_PINCTRL_SC8280XP=y
+CONFIG_PINCTRL_SC8380XP=y
CONFIG_PINCTRL_SDM660=y
CONFIG_PINCTRL_SDM670=y
CONFIG_PINCTRL_SDM845=y
@@ -1244,6 +1245,7 @@ CONFIG_SC_GCC_7180=y
CONFIG_SC_GCC_7280=y
CONFIG_SC_GCC_8180X=y
CONFIG_SC_GCC_8280XP=y
+CONFIG_SC_GCC_8380XP=y
CONFIG_SC_GPUCC_8280XP=m
CONFIG_SC_LPASSCC_8280XP=m
CONFIG_SDM_CAMCC_845=m
@@ -1517,6 +1519,7 @@ CONFIG_INTERCONNECT_QCOM_SC7180=y
CONFIG_INTERCONNECT_QCOM_SC7280=y
CONFIG_INTERCONNECT_QCOM_SC8180X=y
CONFIG_INTERCONNECT_QCOM_SC8280XP=y
+CONFIG_INTERCONNECT_QCOM_SC8380XP=y
CONFIG_INTERCONNECT_QCOM_SDM845=y
CONFIG_INTERCONNECT_QCOM_SM8150=m
CONFIG_INTERCONNECT_QCOM_SM8250=m
--
2.17.1
On 10/25/23 16:24, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> These are the CPU cores in Qualcomm's SC8380XP SoC.
>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
There was an off-list discussion, not sure if it reached you in the
end, but this won't fly. I was told there are at least two separate
core types (discernable by a different MIDR_EL1[PART_NUM] [1]), all
of which should have their own compatible, otherwise we will introduce
something as meaningless as qcom,kryo before - we want more
granularity, like arm,cortex-x1 or arm,cortex-a78 are separate.
[1] https://developer.arm.com/documentation/ddi0601/2023-09/AArch64-Registers/MIDR-EL1--Main-ID-Register
Konrad
On 10/25/23 16:24, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> Document the SC8380XP SoC binding and also the boards using it.
> Also document the new board id qcp (Qualcomm Compute Platform).
>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
Looks good, but can you elaborate a bit more on QCP? Is it going
to be a new fuse setting for devices that fall into the "compute"
category, but aren't necessarily CRDs?
Konrad
On 10/25/23 16:24, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
> SC8380XP SoC, describing the CPUs, GCC and RPMHCC clock controllers,
> geni UART, interrupt controller, TLMM, reserved memory, interconnects,
> SMMU and LLCC nodes.
>
> Co-developed-by: Abel Vesa <[email protected]>
> Signed-off-by: Abel Vesa <[email protected]>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Co-developed-by: Sibi Sankar <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
[...]
> +&tlmm {
> + gpio-reserved-ranges = <33 3>, <44 4>, <238 1>;
It would be really cool if you added an explanation on why these
GPIOs need to be reserved, especially since you can see what's
connected on there on schematics. So, like:
gpio-reserved-ranges = <33 3>, /* something */
<44 4>, /* something else (fp scanner?)
<238 1>; /* UFS reset? */
[...]
> + compatible = "qcom,oryon";
Again, this compatible won't fly unless all of these cores
are totally identical and Oryon is only a name for this
generation on this SoC (which I believe not to be the case).
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L1_0>;
> +
> + L1_0: l1-cache {
> + compatible = "cache";
I'm not sure if L1 is supposed to be described in the DT,
Krzysztof should know.
> + next-level-cache = <&L2_0>;
> +
> + L2_0: l2-cache-0 {
> + compatible = "cache";
cache-level?
cache-unified?
[...]
> + memory@80000000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0 0x80000000 0 0x80000000>;
That contradicts the comment you made above. Plus, 2 GiB seems a
bit low for this SoC :D
[...]
> + gunyah_hyp_mem: gunyah-hyp-region@80000000 {
you can probably strip the "-region" part, as this is implied by
being a child of /reserved-memory
> + pld_pep_mem: pld-pep-region@81f30000 {
What's PLD?
What's this region used for? PEP is a Windows invention.
[...]
> + av1_encoder_mem: av1-encoder-region@8e900000 {
Is AV1enc hardware separate from iris?
[...]
> + gcc: clock-controller@100000 {
> + compatible = "qcom,sc8380xp-gcc";
> + reg = <0 0x100000 0 0x200000>;
The address part of reg should be padded to 8 hex digits.
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
QCOM_ICC_TAG_ALWAYS would be nicer than 0 (see sa8775p)
[...]
> +
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
One space after and before '='
Konrad
On 10/25/23 16:24, Sibi Sankar wrote:
> From: Abel Vesa <[email protected]>
>
> Add basic support for SC8380XP CRD board dts, which allows it to boot
> to a shell.
>
> Signed-off-by: Abel Vesa <[email protected]>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Co-developed-by: Sibi Sankar <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
Pretty much same comments as previous patch (on the QCP part)
Konrad
On 10/25/23 16:24, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> Enable GCC, Pinctrl and Interconnect configs for SC8380XP needed to boot
> to a console shell.
>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
Please mention that =y is necessary to get console and =m would
cause issues there
Konrad
Hi Sibi,
kernel test robot noticed the following build errors:
[auto build test ERROR on robh/for-next]
[also build test ERROR on arm64/for-next/core linus/master v6.6-rc7 next-20231026]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Sibi-Sankar/dt-bindings-arm-cpus-Add-qcom-oryon-compatible/20231026-001800
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link: https://lore.kernel.org/r/20231025142427.2661-4-quic_sibis%40quicinc.com
patch subject: [PATCH 3/5] arm64: dts: qcom: Add base SC8380XP dtsi and the QCP dts
config: arm64-randconfig-004-20231026 (https://download.01.org/0day-ci/archive/20231027/[email protected]/config)
compiler: aarch64-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231027/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
In file included from arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts:10:
>> arch/arm64/boot/dts/qcom/sc8380xp.dtsi:7:10: fatal error: dt-bindings/clock/qcom,sc8380xp-gcc.h: No such file or directory
7 | #include <dt-bindings/clock/qcom,sc8380xp-gcc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
vim +7 arch/arm64/boot/dts/qcom/sc8380xp.dtsi
> 7 #include <dt-bindings/clock/qcom,sc8380xp-gcc.h>
8 #include <dt-bindings/dma/qcom-gpi.h>
9 #include <dt-bindings/interconnect/qcom,sc8380xp-rpmh.h>
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/power/qcom,rpmhpd.h>
12 #include <dt-bindings/power/qcom-rpmpd.h>
13 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
14
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
On 25/10/2023 16:24, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> Document the SC8380XP SoC binding and also the boards using it.
> Also document the new board id qcp (Qualcomm Compute Platform).
>
> Signed-off-by: Rajendra Nayak <[email protected]>
> Signed-off-by: Sibi Sankar <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 88b84035e7b1..6145e9ad340c 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -62,6 +62,7 @@ description: |
> sc7280
> sc8180x
> sc8280xp
> + sc8380xp
> sda660
> sdm450
> sdm630
> @@ -110,6 +111,7 @@ description: |
> liquid
> rdp432-c2
> mtp
> + qcp
> qrd
> rb2
> ride
> @@ -1044,6 +1046,12 @@ properties:
> - qcom,sm8550-qrd
> - const: qcom,sm8550
>
> + - items:
> + - enum:
> + - qcom,sc8380xp-crd
> + - qcom,sc8380xp-qcp
> + - const: qcom,sc8380xp
This is some odd placement. Please keep things properly ordered.
Best regards,
Krzysztof
On 25/10/2023 16:24, Sibi Sankar wrote:
> From: Rajendra Nayak <[email protected]>
>
> Enable GCC, Pinctrl and Interconnect configs for SC8380XP needed to boot
> to a console shell.
This is generic defconfig for all platforms. You must be explicit which
SoC and board you now target. How anyone could figure out that random
set of numbers/letters like A1204XZY SoC is Qualcomm?
Best regards,
Krzysztof
On 23-10-25 19:54:22, Sibi Sankar wrote:
> This series adds the initial (clocks, pinctrl, rpmhpd, regulator, interconnect,
> CPU, SoC and board compatibles) device tree support to boot to shell on the
> Qualcomm SC8380XP platform, aka Snapdragon X Elite.
>
> Dependencies:
> clks: https://lore.kernel.org/lkml/[email protected]/
> interconnect: https://lore.kernel.org/lkml/[email protected]/
> llcc: https://lore.kernel.org/lkml/[email protected]/
> misc-bindings: https://lore.kernel.org/lkml/[email protected]/
> pinctrl: https://lore.kernel.org/lkml/[email protected]/
> regulators: https://lore.kernel.org/lkml/[email protected]/
> rpmhpd: https://lore.kernel.org/lkml/[email protected]/
>
> Release Link: https://www.qualcomm.com/news/releases/2023/10/qualcomm-unleashes-snapdragon-x-elite--the-ai-super-charged-plat
Here is a public tree with all the support currently brought up
for this platform:
https://git.codelinaro.org/linaro/qcomlt/demos/linux/-/tree/sc8380xp
>
> Abel Vesa (1):
> arm64: dts: qcom: sc8380xp: Add Compute Reference Device
>
> Rajendra Nayak (4):
> dt-bindings: arm: cpus: Add qcom,oryon compatible
> dt-bindings: arm: qcom: Document SC8380XP SoC and boards
> arm64: dts: qcom: Add base SC8380XP dtsi and the QCP dts
> arm64: defconfig: Enable SC8380XP SoC base configs
>
> .../devicetree/bindings/arm/cpus.yaml | 1 +
> .../devicetree/bindings/arm/qcom.yaml | 8 +
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> arch/arm64/boot/dts/qcom/sc8380xp-crd.dts | 423 +++
> arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts | 398 ++
> arch/arm64/boot/dts/qcom/sc8380xp.dtsi | 3267 +++++++++++++++++
> arch/arm64/configs/defconfig | 3 +
> 7 files changed, 4102 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp-crd.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp-qcp.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sc8380xp.dtsi
>
> --
> 2.17.1
>
Hey Krzysztof,
Thanks for taking time to review the series.
On 10/27/23 13:46, Krzysztof Kozlowski wrote:
> On 25/10/2023 16:24, Sibi Sankar wrote:
>> From: Rajendra Nayak <[email protected]>
>>
>> Document the SC8380XP SoC binding and also the boards using it.
>> Also document the new board id qcp (Qualcomm Compute Platform).
>>
>> Signed-off-by: Rajendra Nayak <[email protected]>
>> Signed-off-by: Sibi Sankar <[email protected]>
>> ---
>> Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
>> index 88b84035e7b1..6145e9ad340c 100644
>> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
>> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
>> @@ -62,6 +62,7 @@ description: |
>> sc7280
>> sc8180x
>> sc8280xp
>> + sc8380xp
>> sda660
>> sdm450
>> sdm630
>> @@ -110,6 +111,7 @@ description: |
>> liquid
>> rdp432-c2
>> mtp
>> + qcp
>> qrd
>> rb2
>> ride
>> @@ -1044,6 +1046,12 @@ properties:
>> - qcom,sm8550-qrd
>> - const: qcom,sm8550
>>
>> + - items:
>> + - enum:
>> + - qcom,sc8380xp-crd
>> + - qcom,sc8380xp-qcp
>> + - const: qcom,sc8380xp
>
> This is some odd placement. Please keep things properly ordered.
will fix this in the next re-spin.
-Sibi
>
> Best regards,
> Krzysztof
>
Hey Konrad,
Thanks for taking time to review the series.
On 10/26/23 15:54, Konrad Dybcio wrote:
>
>
> On 10/25/23 16:24, Sibi Sankar wrote:
>> From: Rajendra Nayak <[email protected]>
>>
>> Document the SC8380XP SoC binding and also the boards using it.
>> Also document the new board id qcp (Qualcomm Compute Platform).
>>
>> Signed-off-by: Rajendra Nayak <[email protected]>
>> Signed-off-by: Sibi Sankar <[email protected]>
>> ---
> Looks good, but can you elaborate a bit more on QCP? Is it going
> to be a new fuse setting for devices that fall into the "compute"
> category, but aren't necessarily CRDs?
QCP and CRD have different form factors, the former looks like a laptop
while the latter isn't. The fuse settings probably won't have any diffs
between them but the board schematics will have diffs.
-Sibi
>
> Konrad
Hey Konrad,
On 10/26/23 16:06, Konrad Dybcio wrote:
>
>
> On 10/25/23 16:24, Sibi Sankar wrote:
>> From: Rajendra Nayak <[email protected]>
>>
>> Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
>> SC8380XP SoC, describing the CPUs, GCC and RPMHCC clock controllers,
>> geni UART, interrupt controller, TLMM, reserved memory, interconnects,
>> SMMU and LLCC nodes.
>>
>> Co-developed-by: Abel Vesa <[email protected]>
>> Signed-off-by: Abel Vesa <[email protected]>
>> Signed-off-by: Rajendra Nayak <[email protected]>
>> Co-developed-by: Sibi Sankar <[email protected]>
>> Signed-off-by: Sibi Sankar <[email protected]>
>> ---
> [...]
>
>> +&tlmm {
>> + gpio-reserved-ranges = <33 3>, <44 4>, <238 1>;
> It would be really cool if you added an explanation on why these
> GPIOs need to be reserved, especially since you can see what's
> connected on there on schematics. So, like:
>
> gpio-reserved-ranges = <33 3>, /* something */
> <44 4>, /* something else (fp scanner?)
> <238 1>; /* UFS reset? */
will do.
>
>
> [...]
>
>> + compatible = "qcom,oryon";
> Again, this compatible won't fly unless all of these cores
> are totally identical and Oryon is only a name for this
> generation on this SoC (which I believe not to be the case).
>
>> + reg = <0x0 0x0>;
>> + enable-method = "psci";
>> + next-level-cache = <&L1_0>;
>> +
>> + L1_0: l1-cache {
>> + compatible = "cache";
> I'm not sure if L1 is supposed to be described in the DT,
> Krzysztof should know.
>
>> + next-level-cache = <&L2_0>;
>> +
>> + L2_0: l2-cache-0 {
>> + compatible = "cache";
> cache-level?
> cache-unified?
ack will remove the l1 and use ^^ appropriately.
>
> [...]
>
>> + memory@80000000 {
>> + device_type = "memory";
>> + /* We expect the bootloader to fill in the size */
>> + reg = <0 0x80000000 0 0x80000000>;
> That contradicts the comment you made above. Plus, 2 GiB seems a
> bit low for this SoC :D
will fix this.
>
> [...]
>
>> + gunyah_hyp_mem: gunyah-hyp-region@80000000 {
> you can probably strip the "-region" part, as this is implied by
> being a child of /reserved-memory
ok, will do but all the previous SoCs do it differently.
>
>> + pld_pep_mem: pld-pep-region@81f30000 {
> What's PLD?
>
> What's this region used for? PEP is a Windows invention.
>
We list all the possible reserved memory regions from the reference doc.
I can remove the unused regions in the platforms dts later once this
series lands.
> [...]
>
>> + av1_encoder_mem: av1-encoder-region@8e900000 {
> Is AV1enc hardware separate from iris?
no, it isn't separate from iris AFAIK.
>
> [...]
>
>> + gcc: clock-controller@100000 {
>> + compatible = "qcom,sc8380xp-gcc";
>> + reg = <0 0x100000 0 0x200000>;
> The address part of reg should be padded to 8 hex digits.
thanks for catching this.
>
>> +
>> + interconnects = <&clk_virt MASTER_QUP_CORE_2 0
>> &clk_virt SLAVE_QUP_CORE_2 0>,
> QCOM_ICC_TAG_ALWAYS would be nicer than 0 (see sa8775p)
will do.
>
> [...]
>
>> +
>> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> One space after and before '='
ack
>
> Konrad
Hey Konrad,
On 10/26/23 16:08, Konrad Dybcio wrote:
>
>
> On 10/25/23 16:24, Sibi Sankar wrote:
>> From: Abel Vesa <[email protected]>
>>
>> Add basic support for SC8380XP CRD board dts, which allows it to boot
>> to a shell.
>>
>> Signed-off-by: Abel Vesa <[email protected]>
>> Signed-off-by: Rajendra Nayak <[email protected]>
>> Co-developed-by: Sibi Sankar <[email protected]>
>> Signed-off-by: Sibi Sankar <[email protected]>
>> ---
> Pretty much same comments as previous patch (on the QCP part)
Sure will add comments marking the reserved gpios.
-Sibi
>
> Konrad
Hey Konrad,
On 10/26/23 16:25, Konrad Dybcio wrote:
>
>
> On 10/25/23 16:24, Sibi Sankar wrote:
>> From: Rajendra Nayak <[email protected]>
>>
>> Enable GCC, Pinctrl and Interconnect configs for SC8380XP needed to boot
>> to a console shell.
>>
>> Signed-off-by: Rajendra Nayak <[email protected]>
>> Signed-off-by: Sibi Sankar <[email protected]>
>> ---
> Please mention that =y is necessary to get console and =m would
> cause issues there
Will add ^^ in the next re-spin.
-Sibi
>
> Konrad
Hey Krzysztof,
On 10/27/23 13:48, Krzysztof Kozlowski wrote:
> On 25/10/2023 16:24, Sibi Sankar wrote:
>> From: Rajendra Nayak <[email protected]>
>>
>> Enable GCC, Pinctrl and Interconnect configs for SC8380XP needed to boot
>> to a console shell.
>
> This is generic defconfig for all platforms. You must be explicit which
> SoC and board you now target. How anyone could figure out that random
> set of numbers/letters like A1204XZY SoC is Qualcomm?
Thanks, will fixup the commit message.
-Sibi
>
> Best regards,
> Krzysztof
>