2023-11-29 21:26:59

by Doug Anderson

Subject: [PATCH net v3 4/5] r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()

Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_pre_firmware_1().

Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Reviewed-by: Grant Grundler <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
---

(no changes since v2)

Changes in v2:
- Added Fixes tag to RTL8152_INACCESSIBLE patches.
- Split RTL8152_INACCESSIBLE patches by the commit the loop came from.

drivers/net/usb/r8152.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c4dd81e2421f..3958eb622d47 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -5645,6 +5645,8 @@ static int r8153_pre_firmware_1(struct r8152 *tp)
for (i = 0; i < 104; i++) {
u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);

+ if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+ return -ENODEV;
if (!(ocp_data & WTD1_EN))
break;
usleep_range(1000, 2000);
--
2.43.0.rc1.413.gea7ed67945-goog

2023-11-30 08:28:16

by Hayes Wang

Subject: RE: [PATCH net v3 4/5] r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()

Douglas Anderson <[email protected]>
> Sent: Thursday, November 30, 2023 5:25 AM
[...]
>
> Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
> so that they don't delay too long if the device becomes
> inaccessible. Add the break to the loop in r8153_pre_firmware_1().
>
> Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
> Reviewed-by: Grant Grundler <[email protected]>
> Signed-off-by: Douglas Anderson <[email protected]>

Acked-by: Hayes Wang <[email protected]>

Best Regards,
Hayes