The DMA interrupt clear register overwritten during
simultaneous playback and capture in lpass platform
interrupt handler. It's causing playback or capture stuck
in similtaneous plaback on speaker and capture on dmic test.
Update appropriate reg fields of corresponding channel instead
of entire register write.
Fixes: commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
---
Changes since v2:
-- Removed redundant variables.
Changes since v1:
-- Subject lines changed.
sound/soc/qcom/lpass-platform.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index 0df9481ea4c6..f9df76d37858 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,
return -EINVAL;
}
- ret = regmap_write(map, reg_irqclr, val_irqclr);
+ ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr);
if (ret) {
dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", ret);
return ret;
@@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(
struct lpass_variant *v = drvdata->variant;
irqreturn_t ret = IRQ_NONE;
int rv;
- unsigned int reg = 0, val = 0;
+ unsigned int reg, val, mask;
struct regmap *map;
unsigned int dai_id = cpu_dai->driver->id;
+ mask = LPAIF_IRQ_ALL(chan);
switch (dai_id) {
case LPASS_DP_RX:
map = drvdata->hdmiif_map;
@@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
return -EINVAL;
}
if (interrupts & LPAIF_IRQ_PER(chan)) {
-
- rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val);
+ rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_PER(chan) | val));
if (rv) {
dev_err(soc_runtime->dev,
"error writing to irqclear reg: %d\n", rv);
@@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
}
if (interrupts & LPAIF_IRQ_XRUN(chan)) {
- rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val);
+ rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_XRUN(chan) | val));
if (rv) {
dev_err(soc_runtime->dev,
"error writing to irqclear reg: %d\n", rv);
@@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
}
if (interrupts & LPAIF_IRQ_ERR(chan)) {
- rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val);
+ rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_ERR(chan) | val));
if (rv) {
dev_err(soc_runtime->dev,
"error writing to irqclear reg: %d\n", rv);
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
On Wed, 9 Jun 2021 12:53:10 +0530, Srinivasa Rao Mandadapu wrote:
> The DMA interrupt clear register overwritten during
> simultaneous playback and capture in lpass platform
> interrupt handler. It's causing playback or capture stuck
> in similtaneous plaback on speaker and capture on dmic test.
> Update appropriate reg fields of corresponding channel instead
> of entire register write.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: qcom: Fix for DMA interrupt clear reg overwriting
commit: da0363f7bfd3c32f8d5918e40bfddb9905c86ee1
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
Hi,
On 09.06.2021 09:23, Srinivasa Rao Mandadapu wrote:
> The DMA interrupt clear register overwritten during
> simultaneous playback and capture in lpass platform
> interrupt handler. It's causing playback or capture stuck
> in similtaneous plaback on speaker and capture on dmic test.
> Update appropriate reg fields of corresponding channel instead
> of entire register write.
>
> Fixes: commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
This patch landed recently in linux-next as commit da0363f7bfd3 ("ASoC:
qcom: Fix for DMA interrupt clear reg overwriting"). It breaks ALSA
playback on DragonBoard 410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts).
After applying this patch, running 'speaker-test -l1' never finishes.
There is no error nor kernel warning message. Before that commit, the
playback worked fine on that board.
> ---
> Changes since v2:
> -- Removed redundant variables.
> Changes since v1:
> -- Subject lines changed.
> sound/soc/qcom/lpass-platform.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
> index 0df9481ea4c6..f9df76d37858 100644
> --- a/sound/soc/qcom/lpass-platform.c
> +++ b/sound/soc/qcom/lpass-platform.c
> @@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,
> return -EINVAL;
> }
>
> - ret = regmap_write(map, reg_irqclr, val_irqclr);
> + ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr);
> if (ret) {
> dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", ret);
> return ret;
> @@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(
> struct lpass_variant *v = drvdata->variant;
> irqreturn_t ret = IRQ_NONE;
> int rv;
> - unsigned int reg = 0, val = 0;
> + unsigned int reg, val, mask;
> struct regmap *map;
> unsigned int dai_id = cpu_dai->driver->id;
>
> + mask = LPAIF_IRQ_ALL(chan);
> switch (dai_id) {
> case LPASS_DP_RX:
> map = drvdata->hdmiif_map;
> @@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
> return -EINVAL;
> }
> if (interrupts & LPAIF_IRQ_PER(chan)) {
> -
> - rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val);
> + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_PER(chan) | val));
> if (rv) {
> dev_err(soc_runtime->dev,
> "error writing to irqclear reg: %d\n", rv);
> @@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
> }
>
> if (interrupts & LPAIF_IRQ_XRUN(chan)) {
> - rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val);
> + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_XRUN(chan) | val));
> if (rv) {
> dev_err(soc_runtime->dev,
> "error writing to irqclear reg: %d\n", rv);
> @@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
> }
>
> if (interrupts & LPAIF_IRQ_ERR(chan)) {
> - rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val);
> + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_ERR(chan) | val));
> if (rv) {
> dev_err(soc_runtime->dev,
> "error writing to irqclear reg: %d\n", rv);
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
Hi Marek,
Thanks for testing next and reporting this back.
On 17/06/2021 20:35, Marek Szyprowski wrote:
> Hi,
>
> On 09.06.2021 09:23, Srinivasa Rao Mandadapu wrote:
>> The DMA interrupt clear register overwritten during
>> simultaneous playback and capture in lpass platform
>> interrupt handler. It's causing playback or capture stuck
>> in similtaneous plaback on speaker and capture on dmic test.
>> Update appropriate reg fields of corresponding channel instead
>> of entire register write.
>>
>> Fixes: commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>
> This patch landed recently in linux-next as commit da0363f7bfd3 ("ASoC:
> qcom: Fix for DMA interrupt clear reg overwriting"). It breaks ALSA
> playback on DragonBoard 410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts).
> After applying this patch, running 'speaker-test -l1' never finishes.
> There is no error nor kernel warning message. Before that commit, the
> playback worked fine on that board.
TBH, I should have looked at the hw register description that is being
updated in the patch. This is a software write only and hardware
readable register for which update_bits really does not make sense at
all. While digging out I found an issue with regmap_cache reads which
should have reported an error while attempting to even do this. I sent
out a patch to fix this.
Now for this patch itself, We should send a patch to revert it.
thanks,
srini
>
>> ---
>> Changes since v2:
>> -- Removed redundant variables.
>> Changes since v1:
>> -- Subject lines changed.
>> sound/soc/qcom/lpass-platform.c | 12 ++++++------
>> 1 file changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
>> index 0df9481ea4c6..f9df76d37858 100644
>> --- a/sound/soc/qcom/lpass-platform.c
>> +++ b/sound/soc/qcom/lpass-platform.c
>> @@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,
>> return -EINVAL;
>> }
>>
>> - ret = regmap_write(map, reg_irqclr, val_irqclr);
>> + ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr);
>> if (ret) {
>> dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", ret);
>> return ret;
>> @@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(
>> struct lpass_variant *v = drvdata->variant;
>> irqreturn_t ret = IRQ_NONE;
>> int rv;
>> - unsigned int reg = 0, val = 0;
>> + unsigned int reg, val, mask;
>> struct regmap *map;
>> unsigned int dai_id = cpu_dai->driver->id;
>>
>> + mask = LPAIF_IRQ_ALL(chan);
>> switch (dai_id) {
>> case LPASS_DP_RX:
>> map = drvdata->hdmiif_map;
>> @@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
>> return -EINVAL;
>> }
>> if (interrupts & LPAIF_IRQ_PER(chan)) {
>> -
>> - rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val);
>> + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_PER(chan) | val));
>> if (rv) {
>> dev_err(soc_runtime->dev,
>> "error writing to irqclear reg: %d\n", rv);
>> @@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
>> }
>>
>> if (interrupts & LPAIF_IRQ_XRUN(chan)) {
>> - rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val);
>> + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_XRUN(chan) | val));
>> if (rv) {
>> dev_err(soc_runtime->dev,
>> "error writing to irqclear reg: %d\n", rv);
>> @@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
>> }
>>
>> if (interrupts & LPAIF_IRQ_ERR(chan)) {
>> - rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val);
>> + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_ERR(chan) | val));
>> if (rv) {
>> dev_err(soc_runtime->dev,
>> "error writing to irqclear reg: %d\n", rv);
>
> Best regards
>
Hi Marek/Srinivasa,
On 17/06/2021 20:35, Marek Szyprowski wrote:
> Hi,
>
> On 09.06.2021 09:23, Srinivasa Rao Mandadapu wrote:
>> The DMA interrupt clear register overwritten during
>> simultaneous playback and capture in lpass platform
>> interrupt handler. It's causing playback or capture stuck
>> in similtaneous plaback on speaker and capture on dmic test.
>> Update appropriate reg fields of corresponding channel instead
>> of entire register write.
>>
>> Fixes: commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>
Can you please try this patch and let us know if this fixes the issue
------------------------->cut<-------------------------------
Author: Srinivas Kandagatla <[email protected]>
Date: Mon Jun 21 12:38:43 2021 +0100
ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
Currently IRQ_CLEAR register is marked as write-only, however using
regmap_update_bits on this register will have some side effects.
so mark IRQ_CLEAR register appropriately as readable and volatile.
Signed-off-by: Srinivas Kandagatla <[email protected]>
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 0b9cbf2ce505..8998697cd1e1 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -525,6 +525,8 @@ static bool lpass_cpu_regmap_readable(struct device
*dev, unsigned int reg)
return true;
for (i = 0; i < v->irq_ports; ++i) {
+ if (reg == LPAIF_IRQCLEAR_REG(v, i))
+ return true;
if (reg == LPAIF_IRQEN_REG(v, i))
return true;
if (reg == LPAIF_IRQSTAT_REG(v, i))
@@ -566,9 +568,12 @@ static bool lpass_cpu_regmap_volatile(struct device
*dev, unsigned int reg)
struct lpass_variant *v = drvdata->variant;
int i;
- for (i = 0; i < v->irq_ports; ++i)
+ for (i = 0; i < v->irq_ports; ++i) {
+ if (reg == LPAIF_IRQCLEAR_REG(v, i))
+ return true;
if (reg == LPAIF_IRQSTAT_REG(v, i))
return true;
+ }
for (i = 0; i < v->rdma_channels; ++i)
if (reg == LPAIF_RDMACURR_REG(v, i))
------------------------->cut<-------------------------------
--srini
> This patch landed recently in linux-next as commit da0363f7bfd3 ("ASoC:
> qcom: Fix for DMA interrupt clear reg overwriting"). It breaks ALSA
> playback on DragonBoard 410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts).
> After applying this patch, running 'speaker-test -l1' never finishes.
> There is no error nor kernel warning message. Before that commit, the
> playback worked fine on that board.
>
>> ---
>> Changes since v2:
>> -- Removed redundant variables.
>> Changes since v1:
>> -- Subject lines changed.
>> sound/soc/qcom/lpass-platform.c | 12 ++++++------
>> 1 file changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
>> index 0df9481ea4c6..f9df76d37858 100644
>> --- a/sound/soc/qcom/lpass-platform.c
>> +++ b/sound/soc/qcom/lpass-platform.c
>> @@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,
>> return -EINVAL;
>> }
>>
>> - ret = regmap_write(map, reg_irqclr, val_irqclr);
>> + ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr);
>> if (ret) {
>> dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", ret);
>> return ret;
>> @@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(
>> struct lpass_variant *v = drvdata->variant;
>> irqreturn_t ret = IRQ_NONE;
>> int rv;
>> - unsigned int reg = 0, val = 0;
>> + unsigned int reg, val, mask;
>> struct regmap *map;
>> unsigned int dai_id = cpu_dai->driver->id;
>>
>> + mask = LPAIF_IRQ_ALL(chan);
>> switch (dai_id) {
>> case LPASS_DP_RX:
>> map = drvdata->hdmiif_map;
>> @@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
>> return -EINVAL;
>> }
>> if (interrupts & LPAIF_IRQ_PER(chan)) {
>> -
>> - rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val);
>> + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_PER(chan) | val));
>> if (rv) {
>> dev_err(soc_runtime->dev,
>> "error writing to irqclear reg: %d\n", rv);
>> @@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
>> }
>>
>> if (interrupts & LPAIF_IRQ_XRUN(chan)) {
>> - rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val);
>> + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_XRUN(chan) | val));
>> if (rv) {
>> dev_err(soc_runtime->dev,
>> "error writing to irqclear reg: %d\n", rv);
>> @@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
>> }
>>
>> if (interrupts & LPAIF_IRQ_ERR(chan)) {
>> - rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val);
>> + rv = regmap_update_bits(map, reg, mask, (LPAIF_IRQ_ERR(chan) | val));
>> if (rv) {
>> dev_err(soc_runtime->dev,
>> "error writing to irqclear reg: %d\n", rv);
>
> Best regards
>
Hi,
On 21.06.2021 14:52, Srinivas Kandagatla wrote:
>
> On 17/06/2021 20:35, Marek Szyprowski wrote:
>>
>> On 09.06.2021 09:23, Srinivasa Rao Mandadapu wrote:
>>> The DMA interrupt clear register overwritten during
>>> simultaneous playback and capture in lpass platform
>>> interrupt handler. It's causing playback or capture stuck
>>> in similtaneous plaback on speaker and capture on dmic test.
>>> Update appropriate reg fields of corresponding channel instead
>>> of entire register write.
>>>
>>> Fixes: commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")
>>>
>>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>>
> Can you please try this patch and let us know if this fixes the issue
>
> ------------------------->cut<-------------------------------
> Author: Srinivas Kandagatla <[email protected]>
> Date: Mon Jun 21 12:38:43 2021 +0100
>
> ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and
> readable
>
> Currently IRQ_CLEAR register is marked as write-only, however using
> regmap_update_bits on this register will have some side effects.
> so mark IRQ_CLEAR register appropriately as readable and volatile.
>
> Signed-off-by: Srinivas Kandagatla <[email protected]>
This fixes the issue observed on DragonBoard410c. Feel free to add:
Reported-by: Marek Szyprowski <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
> diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
> index 0b9cbf2ce505..8998697cd1e1 100644
> --- a/sound/soc/qcom/lpass-cpu.c
> +++ b/sound/soc/qcom/lpass-cpu.c
> @@ -525,6 +525,8 @@ static bool lpass_cpu_regmap_readable(struct
> device *dev, unsigned int reg)
> return true;
>
> for (i = 0; i < v->irq_ports; ++i) {
> + if (reg == LPAIF_IRQCLEAR_REG(v, i))
> + return true;
> if (reg == LPAIF_IRQEN_REG(v, i))
> return true;
> if (reg == LPAIF_IRQSTAT_REG(v, i))
> @@ -566,9 +568,12 @@ static bool lpass_cpu_regmap_volatile(struct
> device *dev, unsigned int reg)
> struct lpass_variant *v = drvdata->variant;
> int i;
>
> - for (i = 0; i < v->irq_ports; ++i)
> + for (i = 0; i < v->irq_ports; ++i) {
> + if (reg == LPAIF_IRQCLEAR_REG(v, i))
> + return true;
> if (reg == LPAIF_IRQSTAT_REG(v, i))
> return true;
> + }
>
> for (i = 0; i < v->rdma_channels; ++i)
> if (reg == LPAIF_RDMACURR_REG(v, i))
>
> ------------------------->cut<-------------------------------
>
> --srini
>
>> This patch landed recently in linux-next as commit da0363f7bfd3 ("ASoC:
>> qcom: Fix for DMA interrupt clear reg overwriting"). It breaks ALSA
>> playback on DragonBoard 410c (arch/arm64/boot/dts/qcom/apq8016-sbc.dts).
>> After applying this patch, running 'speaker-test -l1' never finishes.
>> There is no error nor kernel warning message. Before that commit, the
>> playback worked fine on that board.
>>
>>> ---
>>> Changes since v2:
>>> -- Removed redundant variables.
>>> Changes since v1:
>>> -- Subject lines changed.
>>> sound/soc/qcom/lpass-platform.c | 12 ++++++------
>>> 1 file changed, 6 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/sound/soc/qcom/lpass-platform.c
>>> b/sound/soc/qcom/lpass-platform.c
>>> index 0df9481ea4c6..f9df76d37858 100644
>>> --- a/sound/soc/qcom/lpass-platform.c
>>> +++ b/sound/soc/qcom/lpass-platform.c
>>> @@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct
>>> snd_soc_component *component,
>>> return -EINVAL;
>>> }
>>> - ret = regmap_write(map, reg_irqclr, val_irqclr);
>>> + ret = regmap_update_bits(map, reg_irqclr, val_irqclr,
>>> val_irqclr);
>>> if (ret) {
>>> dev_err(soc_runtime->dev, "error writing to irqclear
>>> reg: %d\n", ret);
>>> return ret;
>>> @@ -650,10 +650,11 @@ static irqreturn_t lpass_dma_interrupt_handler(
>>> struct lpass_variant *v = drvdata->variant;
>>> irqreturn_t ret = IRQ_NONE;
>>> int rv;
>>> - unsigned int reg = 0, val = 0;
>>> + unsigned int reg, val, mask;
>>> struct regmap *map;
>>> unsigned int dai_id = cpu_dai->driver->id;
>>> + mask = LPAIF_IRQ_ALL(chan);
>>> switch (dai_id) {
>>> case LPASS_DP_RX:
>>> map = drvdata->hdmiif_map;
>>> @@ -676,8 +677,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
>>> return -EINVAL;
>>> }
>>> if (interrupts & LPAIF_IRQ_PER(chan)) {
>>> -
>>> - rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val);
>>> + rv = regmap_update_bits(map, reg, mask,
>>> (LPAIF_IRQ_PER(chan) | val));
>>> if (rv) {
>>> dev_err(soc_runtime->dev,
>>> "error writing to irqclear reg: %d\n", rv);
>>> @@ -688,7 +688,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
>>> }
>>> if (interrupts & LPAIF_IRQ_XRUN(chan)) {
>>> - rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val);
>>> + rv = regmap_update_bits(map, reg, mask,
>>> (LPAIF_IRQ_XRUN(chan) | val));
>>> if (rv) {
>>> dev_err(soc_runtime->dev,
>>> "error writing to irqclear reg: %d\n", rv);
>>> @@ -700,7 +700,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
>>> }
>>> if (interrupts & LPAIF_IRQ_ERR(chan)) {
>>> - rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val);
>>> + rv = regmap_update_bits(map, reg, mask,
>>> (LPAIF_IRQ_ERR(chan) | val));
>>> if (rv) {
>>> dev_err(soc_runtime->dev,
>>> "error writing to irqclear reg: %d\n", rv);
>>
>
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland