Change Log
==========
- move the &plat_dev->dev to previous line to warp more beautiful (Per Jonathan)
- rename error label with the same suffix 'err' (Per Jonathan)
- drop unnecessary else branch and return directly (Per Baolin)
- warp out set prev_count from dwc_pcie_pmu_set_period (Per Baolin)
- use PMU_FORMAT_ATTR to simplify format sysfs stuff (Per Will)
- export pci_clear_and_set_dword() to simplify _enable() functions (Per Will)
- simplify _read() function by unconditionally calculate with unit in bytes plused if branch for group#1 event (Per Will and Robin)
- simplify _update() function by unconditionally mask with 64-bit width plused if branch for lane event (Per Will)
- add type sanity check in _init() (Per Will)
- test with fuzzing tool before this new version (Per Will)
- register a platform device for each PCI device to probe RAS_DES PMU cap (Per Robin)
- add dwc_pcie_vendor_ids to extend vendor id for future added device (Per Krishna)
- pickup review-by tag from Baolin, Yicong and Jonathan
changes since v8:
- tidy up doc and pick up Reviewed-by tag in pathc 1/4 (Per Yicong and Jonathan)
- rename ras_des as ras_des_offset and remove coment about it (Per Jonathan)
- keep exact reverse order of what happened in probe when unregister pmu (Per Jonathan)
- remove the hender length check to make the driver more compatible (Per Jonathan)
- move unwind of register pmu forward to fix list_del() on something that was never added (Per Jonathan)
- use devm_add_action_or_reset() to unwind bus_register_notifier() (Per Jonathan)
- use local pdev directly in dwc_pcie_pmu_offline_cpu() and dwc_pcie_pmu_probe() (Per Jonathan)
- use the approach of a gotos to handle errors in dwc_pcie_pmu_init() (Per Jonathan)
- multiply the counter value at point of read by 16 for group#1 events (Per Jonathan)
changes since v7:
- add config help with alibaba name (per Bjorn)
- remove the ARM64 dependency (per Bjorn and Jonathan)
- fix typo and column warp (per Bjorn)
- move list_del() after perf_pmu_unregister() (per Bjorn)
- reorder the funtions by interests (per Bjorn)
- rewrite commit log about PMU counters, also update doc (per Bjorn)
- extend to support stat time-based analysis and lane event at the same time (per Bjorn and Jonathan)
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/T/
changes since v6:
- improve editorial things in doc (Per Jonathan)
- change config help to generic text (Per Jonathan)
- remove macro to_dwc_pcie_pmu by moving pmu as the first member to struct dwc_pcie_pmu (Per Yicong)
- add event type check in dwc_pcie_event_show() to keep consistent with other function (Per Jonathan)
- remove intended blank line (Per Yicong)
- protect against lower 32 bits of counter overflow by try again trick (Per Jonathan)
- call pci_dev_put on all the return branch to keep the refcnt balance (Per Jonathan and Yicong)
- use devm_add_action_or_reset() to automatic unwind (Per Jonathan)
- fix picking numa-aware context cpu up when offline and offline cpu (Per Jonathan)
- simplify online cpu by init pcie_pmu->on_cpu as -1 (Per Jonathan)
- add bus_register_notifier() to handle rootport hotplug (Per Yicong)
- pick up Acked-by from Bjorn for patch 2/4 (Per Bjorn)
Link: https://lore.kernel.org/lkml/[email protected]/T/
changes since v5:
- Rewrite the commit log to follow policy in pci_ids.h (Bjorn Helgaas)
- return error code when __dwc_pcie_pmu_probe failed (Baolin Wang)
- call 'cpuhp_remove_multi_state()' when exiting the driver. (Baolin Wang)
- pick up Review-by tag from Baolin for Patch 1 and 3
Link: https://lore.kernel.org/lkml/ZGuSimj1cuQl3W5L@bhelgaas/T/#mba3fa2572dde0deddb40b5b24a31f4df41004bdf
changes since v4:
1. addressing commens from Bjorn Helgaas:
- reorder the includes by alpha
- change all macros with upper-case hex
- change ras_des type into u16
- remove unnecessary outer "()"
- minor format changes
2. Address commensts from Jonathan Cameron:
- rewrite doc and add a example to show how to use lane event
3. fix compile error reported by: kernel test robot
- remove COMPILE_TEST and add depend on PCI in kconfig
- add Reported-by: kernel test robot <[email protected]>
Changes since v3:
1. addressing comments from Robin Murphy:
- add a prepare patch to define pci id in linux/pci_ids.h
- remove unnecessary 64BIT dependency
- fix DWC_PCIE_PER_EVENT_OFF/ON macro
- remove dwc_pcie_pmu struct and move all its fileds into dwc_pcie_rp_info
- remove unnecessary format field show
- use sysfs_emit() instead of all the assorted sprintf() and snprintf() calls.
- remove unnecessary spaces and remove unnecessary cast to follow event show convention
- remove pcie_pmu_event_attr_is_visible
- fix a refcout leak on error branch when walk pci device in for_each_pci_dev
- remove bdf field from dwc_pcie_rp_info and calculate it at runtime
- finish all the checks before allocating rp_info to avoid hanging wasted memory
- remove some unused fields
- warp out control register configuration from sub function to .add()
- make function return type with a proper signature
- fix lane event count enable by clear DWC_PCIE_CNT_ENABLE field first
- pass rp_info directly to the read_*_counter helpers and in start, stop and add callbacks
- move event type validtion into .event_init()
- use is_sampling_event() to be consistent with everything else of pmu drivers
- remove unnecessary dev_err message in .event_init()
- return EINVAL instead EOPNOTSUPP for not a valid event
- finish all the checks before start modifying the event
- fix sibling event check by comparing event->pmu with sibling->pmu
- probe PMU for each rootport independently
- use .update() as .read() directly
- remove dynamically generating symbolic name of lane event
- redefine static symbolic name of lane event and leave lane filed to user
- add CPU hotplug support
2. addressing comments from Baolin:
- add a mask to avoid possible overflow
Changes since v2 addressing comments from Baolin:
- remove redundant macro definitions
- use dev_err to print error message
- change pmu_is_register to boolean
- use PLATFORM_DEVID_NONE macro
- fix module author format
Changes since v1:
1. address comments from Jonathan:
- drop marco for PMU name and VSEC version
- simplify code with PCI standard marco
- simplify code with FIELD_PREP()/FIELD_GET() to replace shift marco
- name register filed with single _ instead double
- wrap dwc_pcie_pmu_{write}_dword out and drop meaningless snaity check
- check vendor id while matching vesc with pci_find_vsec_capability()
- remove RP_NUM_MAX and use a list to organize PMU devices for rootports
- replace DWC_PCIE_CREATE_BDF with standard PCI_DEVID
- comments on riping register together
2. address comments from Bjorn:
- rename DWC_PCIE_VSEC_ID to DWC_PCIE_VSEC_RAS_DES_ID
- rename cap_pos to ras_des
- simplify declare of device_attribute with DEVICE_ATTR_RO
- simplify code with PCI standard macro and API like pcie_get_width_cap()
- fix some code style problem and typo
- drop meaningless snaity check of container_of
3. address comments from Yicong:
- use sysfs_emit() to replace sprintf()
- simplify iteration of pci device with for_each_pci_dev
- pick preferred CPUs on a near die and add comments
- unregister PMU drivers only for failed ones
- log on behalf PMU device and give more hint
- fix some code style problem
(Thanks for all comments and they are very valuable to me)
Shuai Xue (5):
docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
PCI: Add Alibaba Vendor ID to linux/pci_ids.h
PCI: move pci_clear_and_set_dword helper to pci header
drivers/perf: add DesignWare PCIe PMU driver
MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
.../admin-guide/perf/dwc_pcie_pmu.rst | 94 +++
Documentation/admin-guide/perf/index.rst | 1 +
MAINTAINERS | 7 +
drivers/infiniband/hw/erdma/erdma_hw.h | 2 -
drivers/pci/access.c | 12 +
drivers/pci/pcie/aspm.c | 11 -
drivers/perf/Kconfig | 7 +
drivers/perf/Makefile | 1 +
drivers/perf/dwc_pcie_pmu.c | 798 ++++++++++++++++++
include/linux/pci.h | 2 +
include/linux/pci_ids.h | 2 +
11 files changed, 924 insertions(+), 13 deletions(-)
create mode 100644 Documentation/admin-guide/perf/dwc_pcie_pmu.rst
create mode 100644 drivers/perf/dwc_pcie_pmu.c
--
2.39.3
The clear and set pattern is commonly used for accessing pci config,
move the helper pci_clear_and_set_dword from aspm.c into pci header.
Signed-off-by: Shuai Xue <[email protected]>
---
drivers/pci/access.c | 12 ++++++++++++
drivers/pci/pcie/aspm.c | 11 -----------
include/linux/pci.h | 2 ++
3 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 6554a2e89d36..526360481d99 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -598,3 +598,15 @@ int pci_write_config_dword(const struct pci_dev *dev, int where,
return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
}
EXPORT_SYMBOL(pci_write_config_dword);
+
+void pci_clear_and_set_dword(const struct pci_dev *dev, int pos,
+ u32 clear, u32 set)
+{
+ u32 val;
+
+ pci_read_config_dword(dev, pos, &val);
+ val &= ~clear;
+ val |= set;
+ pci_write_config_dword(dev, pos, val);
+}
+EXPORT_SYMBOL(pci_clear_and_set_dword);
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 1bf630059264..f4e64fedc048 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -423,17 +423,6 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint)
}
}
-static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos,
- u32 clear, u32 set)
-{
- u32 val;
-
- pci_read_config_dword(pdev, pos, &val);
- val &= ~clear;
- val |= set;
- pci_write_config_dword(pdev, pos, val);
-}
-
/* Calculate L1.2 PM substate timing parameters */
static void aspm_calc_l12_info(struct pcie_link_state *link,
u32 parent_l1ss_cap, u32 child_l1ss_cap)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 8c7c2c3c6c65..271f30fd7ca4 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1213,6 +1213,8 @@ int pci_read_config_dword(const struct pci_dev *dev, int where, u32 *val);
int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val);
int pci_write_config_word(const struct pci_dev *dev, int where, u16 val);
int pci_write_config_dword(const struct pci_dev *dev, int where, u32 val);
+void pci_clear_and_set_dword(const struct pci_dev *dev, int pos,
+ u32 clear, u32 set);
int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val);
int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val);
--
2.39.3
Add maintainers for Synopsys DesignWare PCIe PMU driver and driver
document.
Signed-off-by: Shuai Xue <[email protected]>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 6c4cce45a09d..71f363f836ae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20866,6 +20866,13 @@ L: [email protected]
S: Maintained
F: drivers/mmc/host/dw_mmc*
+SYNOPSYS DESIGNWARE PCIE PMU DRIVER
+M: Shuai Xue <[email protected]>
+M: Jing Zhang <[email protected]>
+S: Supported
+F: Documentation/admin-guide/perf/dwc_pcie_pmu.rst
+F: drivers/perf/dwc_pcie_pmu.c
+
SYNOPSYS HSDK RESET CONTROLLER DRIVER
M: Eugeniy Paltsev <[email protected]>
S: Supported
--
2.39.3
This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core controller IP which provides statistics feature. The PMU is a PCIe
configuration space register block provided by each PCIe Root Port in a
Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
injection, and Statistics).
To facilitate collection of statistics the controller provides the
following two features for each Root Port:
- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
time spent in each low-power LTSSM state) and
- one 32-bit counter for Event Counting (error and non-error events for
a specified lane)
Note: There is no interrupt for counter overflow.
This driver adds PMU devices for each PCIe Root Port. And the PMU device is
named based the BDF of Root Port. For example,
30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
the PMU device name for this Root Port is dwc_rootport_3018.
Example usage of counting PCIe RX TLP data payload (Units of bytes)::
$# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
average RX bandwidth can be calculated like this:
PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
Signed-off-by: Shuai Xue <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Yicong Yang <[email protected]>
---
drivers/perf/Kconfig | 7 +
drivers/perf/Makefile | 1 +
drivers/perf/dwc_pcie_pmu.c | 798 ++++++++++++++++++++++++++++++++++++
3 files changed, 806 insertions(+)
create mode 100644 drivers/perf/dwc_pcie_pmu.c
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 273d67ecf6d2..ec6e0d9194a1 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -217,6 +217,13 @@ config MARVELL_CN10K_DDR_PMU
Enable perf support for Marvell DDR Performance monitoring
event on CN10K platform.
+config DWC_PCIE_PMU
+ tristate "Synopsys DesignWare PCIe PMU"
+ depends on PCI
+ help
+ Enable perf support for Synopsys DesignWare PCIe PMU Performance
+ monitoring event on platform including the Alibaba Yitian 710.
+
source "drivers/perf/arm_cspmu/Kconfig"
source "drivers/perf/amlogic/Kconfig"
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 16b3ec4db916..a06338e3401c 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
obj-$(CONFIG_MARVELL_CN10K_DDR_PMU) += marvell_cn10k_ddr_pmu.o
obj-$(CONFIG_APPLE_M1_CPU_PMU) += apple_m1_cpu_pmu.o
obj-$(CONFIG_ALIBABA_UNCORE_DRW_PMU) += alibaba_uncore_drw_pmu.o
+obj-$(CONFIG_DWC_PCIE_PMU) += dwc_pcie_pmu.o
obj-$(CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU) += arm_cspmu/
obj-$(CONFIG_MESON_DDR_PMU) += amlogic/
obj-$(CONFIG_CXL_PMU) += cxl_pmu.o
diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c
new file mode 100644
index 000000000000..9485c41de322
--- /dev/null
+++ b/drivers/perf/dwc_pcie_pmu.c
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Synopsys DesignWare PCIe PMU driver
+ *
+ * Copyright (C) 2021-2023 Alibaba Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/cpuhotplug.h>
+#include <linux/cpumask.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/perf_event.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/smp.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#define DWC_PCIE_VSEC_RAS_DES_ID 0x02
+#define DWC_PCIE_EVENT_CNT_CTL 0x8
+
+/*
+ * Event Counter Data Select includes two parts:
+ * - 27-24: Group number(4-bit: 0..0x7)
+ * - 23-16: Event number(8-bit: 0..0x13) within the Group
+ *
+ * Put them together as in TRM.
+ */
+#define DWC_PCIE_CNT_EVENT_SEL GENMASK(27, 16)
+#define DWC_PCIE_CNT_LANE_SEL GENMASK(11, 8)
+#define DWC_PCIE_CNT_STATUS BIT(7)
+#define DWC_PCIE_CNT_ENABLE GENMASK(4, 2)
+#define DWC_PCIE_PER_EVENT_OFF 0x1
+#define DWC_PCIE_PER_EVENT_ON 0x3
+#define DWC_PCIE_EVENT_CLEAR GENMASK(1, 0)
+#define DWC_PCIE_EVENT_PER_CLEAR 0x1
+
+#define DWC_PCIE_EVENT_CNT_DATA 0xC
+
+#define DWC_PCIE_TIME_BASED_ANAL_CTL 0x10
+#define DWC_PCIE_TIME_BASED_REPORT_SEL GENMASK(31, 24)
+#define DWC_PCIE_TIME_BASED_DURATION_SEL GENMASK(15, 8)
+#define DWC_PCIE_DURATION_MANUAL_CTL 0x0
+#define DWC_PCIE_DURATION_1MS 0x1
+#define DWC_PCIE_DURATION_10MS 0x2
+#define DWC_PCIE_DURATION_100MS 0x3
+#define DWC_PCIE_DURATION_1S 0x4
+#define DWC_PCIE_DURATION_2S 0x5
+#define DWC_PCIE_DURATION_4S 0x6
+#define DWC_PCIE_DURATION_4US 0xFF
+#define DWC_PCIE_TIME_BASED_TIMER_START BIT(0)
+#define DWC_PCIE_TIME_BASED_CNT_ENABLE 0x1
+
+#define DWC_PCIE_TIME_BASED_ANAL_DATA_REG_LOW 0x14
+#define DWC_PCIE_TIME_BASED_ANAL_DATA_REG_HIGH 0x18
+
+/* Event attributes */
+#define DWC_PCIE_CONFIG_EVENTID GENMASK(15, 0)
+#define DWC_PCIE_CONFIG_TYPE GENMASK(19, 16)
+#define DWC_PCIE_CONFIG_LANE GENMASK(27, 20)
+
+#define DWC_PCIE_EVENT_ID(event) FIELD_GET(DWC_PCIE_CONFIG_EVENTID, (event)->attr.config)
+#define DWC_PCIE_EVENT_TYPE(event) FIELD_GET(DWC_PCIE_CONFIG_TYPE, (event)->attr.config)
+#define DWC_PCIE_EVENT_LANE(event) FIELD_GET(DWC_PCIE_CONFIG_LANE, (event)->attr.config)
+
+enum dwc_pcie_event_type {
+ DWC_PCIE_TIME_BASE_EVENT,
+ DWC_PCIE_LANE_EVENT,
+ DWC_PCIE_EVENT_TYPE_MAX,
+};
+
+#define DWC_PCIE_LANE_EVENT_MAX_PERIOD GENMASK_ULL(31, 0)
+#define DWC_PCIE_MAX_PERIOD GENMASK_ULL(63, 0)
+
+struct dwc_pcie_pmu {
+ struct pmu pmu;
+ struct pci_dev *pdev; /* Root Port device */
+ u16 ras_des_offset;
+ u32 nr_lanes;
+
+ struct list_head pmu_node;
+ struct hlist_node cpuhp_node;
+ struct perf_event *event[DWC_PCIE_EVENT_TYPE_MAX];
+ int on_cpu;
+};
+
+#define to_dwc_pcie_pmu(p) (container_of(p, struct dwc_pcie_pmu, pmu))
+
+static int dwc_pcie_pmu_hp_state;
+static struct list_head dwc_pcie_dev_info_head =
+ LIST_HEAD_INIT(dwc_pcie_dev_info_head);
+static bool notify;
+
+struct dwc_pcie_dev_info {
+ struct platform_device *plat_dev;
+ struct pci_dev *pdev;
+ struct list_head dev_node;
+};
+
+struct dwc_pcie_vendor_id {
+ int vendor_id;
+};
+
+static const struct dwc_pcie_vendor_id dwc_pcie_vendor_ids[] = {
+ {.vendor_id = PCI_VENDOR_ID_ALIBABA },
+ {} /* terminator */
+};
+
+static ssize_t cpumask_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(dev_get_drvdata(dev));
+
+ return cpumap_print_to_pagebuf(true, buf, cpumask_of(pcie_pmu->on_cpu));
+}
+static DEVICE_ATTR_RO(cpumask);
+
+static struct attribute *dwc_pcie_pmu_cpumask_attrs[] = {
+ &dev_attr_cpumask.attr,
+ NULL
+};
+
+static struct attribute_group dwc_pcie_cpumask_attr_group = {
+ .attrs = dwc_pcie_pmu_cpumask_attrs,
+};
+
+struct dwc_pcie_format_attr {
+ struct device_attribute attr;
+ u64 field;
+ int config;
+};
+
+PMU_FORMAT_ATTR(eventid, "config:0-15");
+PMU_FORMAT_ATTR(type, "config:16-19");
+PMU_FORMAT_ATTR(lane, "config:20-27");
+
+static struct attribute *dwc_pcie_format_attrs[] = {
+ &format_attr_type.attr,
+ &format_attr_eventid.attr,
+ &format_attr_lane.attr,
+ NULL,
+};
+
+static struct attribute_group dwc_pcie_format_attrs_group = {
+ .name = "format",
+ .attrs = dwc_pcie_format_attrs,
+};
+
+struct dwc_pcie_event_attr {
+ struct device_attribute attr;
+ enum dwc_pcie_event_type type;
+ u16 eventid;
+ u8 lane;
+};
+
+static ssize_t dwc_pcie_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dwc_pcie_event_attr *eattr;
+
+ eattr = container_of(attr, typeof(*eattr), attr);
+
+ if (eattr->type == DWC_PCIE_LANE_EVENT)
+ return sysfs_emit(buf, "eventid=0x%x,type=0x%x,lane=?\n",
+ eattr->eventid, eattr->type);
+ else if (eattr->type == DWC_PCIE_TIME_BASE_EVENT)
+ return sysfs_emit(buf, "eventid=0x%x,type=0x%x\n",
+ eattr->eventid, eattr->type);
+
+ return 0;
+}
+
+#define DWC_PCIE_EVENT_ATTR(_name, _type, _eventid, _lane) \
+ (&((struct dwc_pcie_event_attr[]) {{ \
+ .attr = __ATTR(_name, 0444, dwc_pcie_event_show, NULL), \
+ .type = _type, \
+ .eventid = _eventid, \
+ .lane = _lane, \
+ }})[0].attr.attr)
+
+#define DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(_name, _eventid) \
+ DWC_PCIE_EVENT_ATTR(_name, DWC_PCIE_TIME_BASE_EVENT, _eventid, 0)
+#define DWC_PCIE_PMU_LANE_EVENT_ATTR(_name, _eventid) \
+ DWC_PCIE_EVENT_ATTR(_name, DWC_PCIE_LANE_EVENT, _eventid, 0)
+
+static struct attribute *dwc_pcie_pmu_time_event_attrs[] = {
+ /* Group #0 */
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(one_cycle, 0x00),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(TX_L0S, 0x01),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(RX_L0S, 0x02),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L0, 0x03),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L1, 0x04),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L1_1, 0x05),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L1_2, 0x06),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(CFG_RCVRY, 0x07),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(TX_RX_L0S, 0x08),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(L1_AUX, 0x09),
+
+ /* Group #1 */
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(Tx_PCIe_TLP_Data_Payload, 0x20),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(Rx_PCIe_TLP_Data_Payload, 0x21),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(Tx_CCIX_TLP_Data_Payload, 0x22),
+ DWC_PCIE_PMU_TIME_BASE_EVENT_ATTR(Rx_CCIX_TLP_Data_Payload, 0x23),
+
+ /*
+ * Leave it to the user to specify the lane ID to avoid generating
+ * a list of hundreds of events.
+ */
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_ack_dllp, 0x600),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_update_fc_dllp, 0x601),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_ack_dllp, 0x602),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_update_fc_dllp, 0x603),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_nulified_tlp, 0x604),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_nulified_tlp, 0x605),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_duplicate_tl, 0x606),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_memory_write, 0x700),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_memory_read, 0x701),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_configuration_write, 0x702),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_configuration_read, 0x703),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_io_write, 0x704),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_io_read, 0x705),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_completion_without_data, 0x706),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_completion_with_data, 0x707),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_message_tlp, 0x708),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_atomic, 0x709),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_tlp_with_prefix, 0x70A),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_memory_write, 0x70B),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_memory_read, 0x70C),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_io_write, 0x70F),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_io_read, 0x710),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_completion_without_data, 0x711),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_completion_with_data, 0x712),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_message_tlp, 0x713),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_atomic, 0x714),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_tlp_with_prefix, 0x715),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(tx_ccix_tlp, 0x716),
+ DWC_PCIE_PMU_LANE_EVENT_ATTR(rx_ccix_tlp, 0x717),
+ NULL
+};
+
+static const struct attribute_group dwc_pcie_event_attrs_group = {
+ .name = "events",
+ .attrs = dwc_pcie_pmu_time_event_attrs,
+};
+
+static const struct attribute_group *dwc_pcie_attr_groups[] = {
+ &dwc_pcie_event_attrs_group,
+ &dwc_pcie_format_attrs_group,
+ &dwc_pcie_cpumask_attr_group,
+ NULL
+};
+
+static void dwc_pcie_pmu_lane_event_enable(struct dwc_pcie_pmu *pcie_pmu,
+ bool enable)
+{
+ struct pci_dev *pdev = pcie_pmu->pdev;
+ u16 ras_des_offset = pcie_pmu->ras_des_offset;
+
+ if (enable)
+ pci_clear_and_set_dword(pdev,
+ ras_des_offset + DWC_PCIE_EVENT_CNT_CTL,
+ DWC_PCIE_CNT_ENABLE, DWC_PCIE_PER_EVENT_ON);
+ else
+ pci_clear_and_set_dword(pdev,
+ ras_des_offset + DWC_PCIE_EVENT_CNT_CTL,
+ DWC_PCIE_CNT_ENABLE, DWC_PCIE_PER_EVENT_OFF);
+}
+
+static void dwc_pcie_pmu_time_based_event_enable(struct dwc_pcie_pmu *pcie_pmu,
+ bool enable)
+{
+ struct pci_dev *pdev = pcie_pmu->pdev;
+ u16 ras_des_offset = pcie_pmu->ras_des_offset;
+
+ if (enable)
+ pci_clear_and_set_dword(pdev,
+ ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
+ DWC_PCIE_TIME_BASED_TIMER_START, 0x1);
+ else
+ pci_clear_and_set_dword(pdev,
+ ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
+ DWC_PCIE_TIME_BASED_TIMER_START, 0x0);
+}
+
+static u64 dwc_pcie_pmu_read_lane_event_counter(struct perf_event *event)
+{
+ struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+ struct pci_dev *pdev = pcie_pmu->pdev;
+ u16 ras_des_offset = pcie_pmu->ras_des_offset;
+ u32 val;
+
+ pci_read_config_dword(pdev, ras_des_offset + DWC_PCIE_EVENT_CNT_DATA, &val);
+
+ return val;
+}
+
+static u64 dwc_pcie_pmu_read_time_based_counter(struct perf_event *event)
+{
+ struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+ struct pci_dev *pdev = pcie_pmu->pdev;
+ int event_id = DWC_PCIE_EVENT_ID(event);
+ u16 ras_des_offset = pcie_pmu->ras_des_offset;
+ u32 lo, hi, ss;
+ u64 val;
+
+ /*
+ * The 64-bit value of the data counter is spread across two
+ * registers that are not synchronized. In order to read them
+ * atomically, ensure that the high 32 bits match before and after
+ * reading the low 32 bits.
+ */
+ pci_read_config_dword(pdev,
+ ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_DATA_REG_HIGH, &hi);
+ do {
+ /* snapshot the high 32 bits */
+ ss = hi;
+
+ pci_read_config_dword(
+ pdev, ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_DATA_REG_LOW,
+ &lo);
+ pci_read_config_dword(
+ pdev, ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_DATA_REG_HIGH,
+ &hi);
+ } while (hi != ss);
+
+ val = ((u64)hi << 32) | lo;
+ /*
+ * The Group#1 event measures the amount of data processed in 16-byte
+ * units. Simplify the end-user interface by multiplying the counter
+ * at the point of read.
+ */
+ if (event_id >= 0x20 && event_id <= 0x23)
+ val *= 16;
+
+ return val;
+}
+
+static void dwc_pcie_pmu_event_update(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+ u64 delta, prev, now;
+
+ do {
+ prev = local64_read(&hwc->prev_count);
+
+ if (type == DWC_PCIE_LANE_EVENT)
+ now = dwc_pcie_pmu_read_lane_event_counter(event);
+ else if (type == DWC_PCIE_TIME_BASE_EVENT)
+ now = dwc_pcie_pmu_read_time_based_counter(event);
+
+ } while (local64_cmpxchg(&hwc->prev_count, prev, now) != prev);
+
+ delta = (now - prev) & DWC_PCIE_MAX_PERIOD;
+ /* 32-bit counter for Lane Event Counting */
+ if (type == DWC_PCIE_LANE_EVENT)
+ delta &= DWC_PCIE_LANE_EVENT_MAX_PERIOD;
+
+ local64_add(delta, &event->count);
+}
+
+static int dwc_pcie_pmu_event_init(struct perf_event *event)
+{
+ struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+ enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+ struct perf_event *sibling;
+ u32 lane;
+
+ if (event->attr.type != event->pmu->type)
+ return -ENOENT;
+
+ /* We don't support sampling */
+ if (is_sampling_event(event))
+ return -EINVAL;
+
+ /* We cannot support task bound events */
+ if (event->cpu < 0 || event->attach_state & PERF_ATTACH_TASK)
+ return -EINVAL;
+
+ if (event->group_leader != event &&
+ !is_software_event(event->group_leader))
+ return -EINVAL;
+
+ for_each_sibling_event(sibling, event->group_leader) {
+ if (sibling->pmu != event->pmu && !is_software_event(sibling))
+ return -EINVAL;
+ }
+
+ if (type < 0 || type >= DWC_PCIE_EVENT_TYPE_MAX)
+ return -EINVAL;
+
+ if (type == DWC_PCIE_LANE_EVENT) {
+ lane = DWC_PCIE_EVENT_LANE(event);
+ if (lane < 0 || lane >= pcie_pmu->nr_lanes)
+ return -EINVAL;
+ }
+
+ event->cpu = pcie_pmu->on_cpu;
+
+ return 0;
+}
+
+static void dwc_pcie_pmu_event_start(struct perf_event *event, int flags)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+ enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+
+ hwc->state = 0;
+ local64_set(&hwc->prev_count, 0);
+
+ if (type == DWC_PCIE_LANE_EVENT)
+ dwc_pcie_pmu_lane_event_enable(pcie_pmu, true);
+ else if (type == DWC_PCIE_TIME_BASE_EVENT)
+ dwc_pcie_pmu_time_based_event_enable(pcie_pmu, true);
+}
+
+static void dwc_pcie_pmu_event_stop(struct perf_event *event, int flags)
+{
+ struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+ enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (event->hw.state & PERF_HES_STOPPED)
+ return;
+
+ if (type == DWC_PCIE_LANE_EVENT)
+ dwc_pcie_pmu_lane_event_enable(pcie_pmu, false);
+ else if (type == DWC_PCIE_TIME_BASE_EVENT)
+ dwc_pcie_pmu_time_based_event_enable(pcie_pmu, false);
+
+ dwc_pcie_pmu_event_update(event);
+ hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+}
+
+static int dwc_pcie_pmu_event_add(struct perf_event *event, int flags)
+{
+ struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+ struct pci_dev *pdev = pcie_pmu->pdev;
+ struct hw_perf_event *hwc = &event->hw;
+ enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+ int event_id = DWC_PCIE_EVENT_ID(event);
+ int lane = DWC_PCIE_EVENT_LANE(event);
+ u16 ras_des_offset = pcie_pmu->ras_des_offset;
+ u32 ctrl;
+
+ /* one counter for each type and it is in use */
+ if (pcie_pmu->event[type])
+ return -ENOSPC;
+
+ pcie_pmu->event[type] = event;
+ hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+
+ if (type == DWC_PCIE_LANE_EVENT) {
+ /* EVENT_COUNTER_DATA_REG needs clear manually */
+ ctrl = FIELD_PREP(DWC_PCIE_CNT_EVENT_SEL, event_id) |
+ FIELD_PREP(DWC_PCIE_CNT_LANE_SEL, lane) |
+ FIELD_PREP(DWC_PCIE_CNT_ENABLE, DWC_PCIE_PER_EVENT_OFF) |
+ FIELD_PREP(DWC_PCIE_EVENT_CLEAR, DWC_PCIE_EVENT_PER_CLEAR);
+ pci_write_config_dword(pdev, ras_des_offset + DWC_PCIE_EVENT_CNT_CTL,
+ ctrl);
+ } else if (type == DWC_PCIE_TIME_BASE_EVENT) {
+ /*
+ * TIME_BASED_ANAL_DATA_REG is a 64 bit register, we can safely
+ * use it with any manually controlled duration. And it is
+ * cleared when next measurement starts.
+ */
+ ctrl = FIELD_PREP(DWC_PCIE_TIME_BASED_REPORT_SEL, event_id) |
+ FIELD_PREP(DWC_PCIE_TIME_BASED_DURATION_SEL,
+ DWC_PCIE_DURATION_MANUAL_CTL) |
+ DWC_PCIE_TIME_BASED_CNT_ENABLE;
+ pci_write_config_dword(
+ pdev, ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL, ctrl);
+ }
+
+ if (flags & PERF_EF_START)
+ dwc_pcie_pmu_event_start(event, PERF_EF_RELOAD);
+
+ perf_event_update_userpage(event);
+
+ return 0;
+}
+
+static void dwc_pcie_pmu_event_del(struct perf_event *event, int flags)
+{
+ struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
+ enum dwc_pcie_event_type type = DWC_PCIE_EVENT_TYPE(event);
+
+ dwc_pcie_pmu_event_stop(event, flags | PERF_EF_UPDATE);
+ perf_event_update_userpage(event);
+ pcie_pmu->event[type] = NULL;
+}
+
+static void dwc_pcie_pmu_remove_cpuhp_instance(void *hotplug_node)
+{
+ cpuhp_state_remove_instance_nocalls(dwc_pcie_pmu_hp_state, hotplug_node);
+}
+
+/*
+ * Find the binded DES capability device info of a PCI device.
+ * @pdev: The PCI device.
+ */
+static struct dwc_pcie_dev_info *dwc_pcie_find_dev_info(struct pci_dev *pdev)
+{
+ struct dwc_pcie_dev_info *dev_info;
+
+ list_for_each_entry(dev_info, &dwc_pcie_dev_info_head, dev_node)
+ if (dev_info->pdev == pdev)
+ return dev_info;
+
+ return NULL;
+}
+
+static void dwc_pcie_unregister_pmu(void *data)
+{
+ struct dwc_pcie_pmu *pcie_pmu = data;
+
+ perf_pmu_unregister(&pcie_pmu->pmu);
+}
+
+static bool dwc_pcie_match_des_cap(struct pci_dev *pdev)
+{
+ const struct dwc_pcie_vendor_id *vid;
+ u16 vsec;
+ u32 val;
+
+ if (!pci_is_pcie(pdev) || !(pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT))
+ return false;
+
+ for (vid = dwc_pcie_vendor_ids; vid->vendor_id; vid++) {
+ vsec = pci_find_vsec_capability(pdev, vid->vendor_id,
+ DWC_PCIE_VSEC_RAS_DES_ID);
+ if (vsec)
+ break;
+ }
+ if (!vsec)
+ return false;
+
+ pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val);
+ if (PCI_VNDR_HEADER_REV(val) != 0x04)
+ return false;
+
+ pci_dbg(pdev,
+ "Detected PCIe Vendor-Specific Extended Capability RAS DES\n");
+ return true;
+}
+
+static void dwc_pcie_unregister_dev(struct dwc_pcie_dev_info *dev_info)
+{
+ platform_device_unregister(dev_info->plat_dev);
+ list_del(&dev_info->dev_node);
+ kfree(dev_info);
+}
+
+static int dwc_pcie_register_dev(struct pci_dev *pdev)
+{
+ struct platform_device *plat_dev;
+ struct dwc_pcie_dev_info *dev_info;
+ int ret;
+ u32 bdf;
+
+ bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
+ plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf,
+ pdev, sizeof(*pdev));
+ ret = PTR_ERR_OR_ZERO(plat_dev);
+ if (ret)
+ return ret;
+
+ dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info)
+ return -ENOMEM;
+
+ /* Cache platform device to handle pci device hotplug */
+ dev_info->plat_dev = plat_dev;
+ dev_info->pdev = pdev;
+ list_add(&dev_info->dev_node, &dwc_pcie_dev_info_head);
+
+ return 0;
+}
+
+static int dwc_pcie_pmu_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct dwc_pcie_dev_info *dev_info;
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (!dwc_pcie_match_des_cap(pdev))
+ return NOTIFY_DONE;
+ if (dwc_pcie_register_dev(pdev))
+ return NOTIFY_BAD;
+ break;
+ case BUS_NOTIFY_DEL_DEVICE:
+ dev_info = dwc_pcie_find_dev_info(pdev);
+ if (!dev_info)
+ return NOTIFY_DONE;
+ dwc_pcie_unregister_dev(dev_info);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block dwc_pcie_pmu_nb = {
+ .notifier_call = dwc_pcie_pmu_notifier,
+};
+
+static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
+{
+ struct pci_dev *pdev = plat_dev->dev.platform_data;
+ struct dwc_pcie_pmu *pcie_pmu;
+ char *name;
+ u32 bdf, val;
+ u16 vsec;
+ int ret;
+
+ vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_ALIBABA,
+ DWC_PCIE_VSEC_RAS_DES_ID);
+ pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val);
+ bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
+ name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", bdf);
+ if (!name)
+ return -ENOMEM;
+
+ pcie_pmu = devm_kzalloc(&plat_dev->dev, sizeof(*pcie_pmu), GFP_KERNEL);
+ if (!pcie_pmu)
+ return -ENOMEM;
+
+ pcie_pmu->pdev = pdev;
+ pcie_pmu->ras_des_offset = vsec;
+ pcie_pmu->nr_lanes = pcie_get_width_cap(pdev);
+ pcie_pmu->on_cpu = -1;
+ pcie_pmu->pmu = (struct pmu){
+ .name = name,
+ .parent = &pdev->dev,
+ .module = THIS_MODULE,
+ .attr_groups = dwc_pcie_attr_groups,
+ .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
+ .task_ctx_nr = perf_invalid_context,
+ .event_init = dwc_pcie_pmu_event_init,
+ .add = dwc_pcie_pmu_event_add,
+ .del = dwc_pcie_pmu_event_del,
+ .start = dwc_pcie_pmu_event_start,
+ .stop = dwc_pcie_pmu_event_stop,
+ .read = dwc_pcie_pmu_event_update,
+ };
+
+ /* Add this instance to the list used by the offline callback */
+ ret = cpuhp_state_add_instance(dwc_pcie_pmu_hp_state,
+ &pcie_pmu->cpuhp_node);
+ if (ret) {
+ pci_err(pdev, "Error %d registering hotplug @%x\n", ret, bdf);
+ return ret;
+ }
+
+ /* Unwind when platform driver removes */
+ ret = devm_add_action_or_reset(&plat_dev->dev,
+ dwc_pcie_pmu_remove_cpuhp_instance,
+ &pcie_pmu->cpuhp_node);
+ if (ret)
+ return ret;
+
+ ret = perf_pmu_register(&pcie_pmu->pmu, name, -1);
+ if (ret) {
+ pci_err(pdev, "Error %d registering PMU @%x\n", ret, bdf);
+ return ret;
+ }
+ ret = devm_add_action_or_reset(&plat_dev->dev, dwc_pcie_unregister_pmu,
+ pcie_pmu);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int dwc_pcie_pmu_online_cpu(unsigned int cpu, struct hlist_node *cpuhp_node)
+{
+ struct dwc_pcie_pmu *pcie_pmu;
+
+ pcie_pmu = hlist_entry_safe(cpuhp_node, struct dwc_pcie_pmu, cpuhp_node);
+ if (pcie_pmu->on_cpu == -1)
+ pcie_pmu->on_cpu = cpumask_local_spread(
+ 0, dev_to_node(&pcie_pmu->pdev->dev));
+
+ return 0;
+}
+
+static int dwc_pcie_pmu_offline_cpu(unsigned int cpu, struct hlist_node *cpuhp_node)
+{
+ struct dwc_pcie_pmu *pcie_pmu;
+ struct pci_dev *pdev;
+ int node;
+ cpumask_t mask;
+ unsigned int target;
+
+ pcie_pmu = hlist_entry_safe(cpuhp_node, struct dwc_pcie_pmu, cpuhp_node);
+ /* Nothing to do if this CPU doesn't own the PMU */
+ if (cpu != pcie_pmu->on_cpu)
+ return 0;
+
+ pcie_pmu->on_cpu = -1;
+ pdev = pcie_pmu->pdev;
+ node = dev_to_node(&pdev->dev);
+ if (cpumask_and(&mask, cpumask_of_node(node), cpu_online_mask) &&
+ cpumask_andnot(&mask, &mask, cpumask_of(cpu)))
+ target = cpumask_any(&mask);
+ else
+ target = cpumask_any_but(cpu_online_mask, cpu);
+
+ if (target >= nr_cpu_ids) {
+ pci_err(pdev, "There is no CPU to set\n");
+ return 0;
+ }
+
+ /* This PMU does NOT support interrupt, just migrate context. */
+ perf_pmu_migrate_context(&pcie_pmu->pmu, cpu, target);
+ pcie_pmu->on_cpu = target;
+
+ return 0;
+}
+
+static struct platform_driver dwc_pcie_pmu_driver = {
+ .probe = dwc_pcie_pmu_probe,
+ .driver = {.name = "dwc_pcie_pmu",},
+};
+
+static int __init dwc_pcie_pmu_init(void)
+{
+ struct pci_dev *pdev = NULL;
+ bool found = false;
+ int ret;
+
+ for_each_pci_dev(pdev) {
+ if (!dwc_pcie_match_des_cap(pdev))
+ continue;
+
+ ret = dwc_pcie_register_dev(pdev);
+ if (ret) {
+ pci_dev_put(pdev);
+ return ret;
+ }
+
+ found = true;
+ }
+ if (!found)
+ return -ENODEV;
+
+ ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
+ "perf/dwc_pcie_pmu:online",
+ dwc_pcie_pmu_online_cpu,
+ dwc_pcie_pmu_offline_cpu);
+ if (ret < 0)
+ return ret;
+
+ dwc_pcie_pmu_hp_state = ret;
+
+ ret = platform_driver_register(&dwc_pcie_pmu_driver);
+ if (ret)
+ goto platform_driver_register_err;
+
+ ret = bus_register_notifier(&pci_bus_type, &dwc_pcie_pmu_nb);
+ if (ret)
+ goto platform_driver_register_err;
+ notify = true;
+
+ return 0;
+
+platform_driver_register_err:
+ cpuhp_remove_multi_state(dwc_pcie_pmu_hp_state);
+
+ return ret;
+}
+
+static void __exit dwc_pcie_pmu_exit(void)
+{
+ struct dwc_pcie_dev_info *dev_info, *tmp;
+
+ if (notify)
+ bus_unregister_notifier(&pci_bus_type, &dwc_pcie_pmu_nb);
+ list_for_each_entry_safe(dev_info, tmp, &dwc_pcie_dev_info_head, dev_node)
+ dwc_pcie_unregister_dev(dev_info);
+ platform_driver_unregister(&dwc_pcie_pmu_driver);
+ cpuhp_remove_multi_state(dwc_pcie_pmu_hp_state);
+}
+
+module_init(dwc_pcie_pmu_init);
+module_exit(dwc_pcie_pmu_exit);
+
+MODULE_DESCRIPTION("PMU driver for DesignWare Cores PCI Express Controller");
+MODULE_AUTHOR("Shuai Xue <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
2.39.3
Alibaba's T-Head Yitan 710 SoC includes Synopsys' DesignWare Core PCIe
controller which implements PMU for performance and functional debugging to
facilitate system maintenance.
Document it to provide guidance on how to use it.
Signed-off-by: Shuai Xue <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Yicong Yang <[email protected]>
---
.../admin-guide/perf/dwc_pcie_pmu.rst | 94 +++++++++++++++++++
Documentation/admin-guide/perf/index.rst | 1 +
2 files changed, 95 insertions(+)
create mode 100644 Documentation/admin-guide/perf/dwc_pcie_pmu.rst
diff --git a/Documentation/admin-guide/perf/dwc_pcie_pmu.rst b/Documentation/admin-guide/perf/dwc_pcie_pmu.rst
new file mode 100644
index 000000000000..d47cd229d710
--- /dev/null
+++ b/Documentation/admin-guide/perf/dwc_pcie_pmu.rst
@@ -0,0 +1,94 @@
+======================================================================
+Synopsys DesignWare Cores (DWC) PCIe Performance Monitoring Unit (PMU)
+======================================================================
+
+DesignWare Cores (DWC) PCIe PMU
+===============================
+
+The PMU is a PCIe configuration space register block provided by each PCIe Root
+Port in a Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
+injection, and Statistics).
+
+As the name indicates, the RAS DES capability supports system level
+debugging, AER error injection, and collection of statistics. To facilitate
+collection of statistics, Synopsys DesignWare Cores PCIe controller
+provides the following two features:
+
+- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
+ time spent in each low-power LTSSM state) and
+- one 32-bit counter for Event Counting (error and non-error events for
+ a specified lane)
+
+Note: There is no interrupt for counter overflow.
+
+Time Based Analysis
+-------------------
+
+Using this feature you can obtain information regarding RX/TX data
+throughput and time spent in each low-power LTSSM state by the controller.
+The PMU measures data in two categories:
+
+- Group#0: Percentage of time the controller stays in LTSSM states.
+- Group#1: Amount of data processed (Units of 16 bytes).
+
+Lane Event counters
+-------------------
+
+Using this feature you can obtain Error and Non-Error information in
+specific lane by the controller. The PMU event is selected by all of:
+
+- Group i
+- Event j within the Group i
+- Lane k
+
+Some of the events only exist for specific configurations.
+
+DesignWare Cores (DWC) PCIe PMU Driver
+=======================================
+
+This driver adds PMU devices for each PCIe Root Port named based on the BDF of
+the Root Port. For example,
+
+ 30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
+
+the PMU device name for this Root Port is dwc_rootport_3018.
+
+The DWC PCIe PMU driver registers a perf PMU driver, which provides
+description of available events and configuration options in sysfs, see
+/sys/bus/event_source/devices/dwc_rootport_{bdf}.
+
+The "format" directory describes format of the config fields of the
+perf_event_attr structure. The "events" directory provides configuration
+templates for all documented events. For example,
+"Rx_PCIe_TLP_Data_Payload" is an equivalent of "eventid=0x22,type=0x1".
+
+The "perf list" command shall list the available events from sysfs, e.g.::
+
+ $# perf list | grep dwc_rootport
+ <...>
+ dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/ [Kernel PMU event]
+ <...>
+ dwc_rootport_3018/rx_memory_read,lane=?/ [Kernel PMU event]
+
+Time Based Analysis Event Usage
+-------------------------------
+
+Example usage of counting PCIe RX TLP data payload (Units of bytes)::
+
+ $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
+
+The average RX/TX bandwidth can be calculated using the following formula:
+
+ PCIe RX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
+ PCIe TX Bandwidth = Tx_PCIe_TLP_Data_Payload / Measure_Time_Window
+
+Lane Event Usage
+-------------------------------
+
+Each lane has the same event set and to avoid generating a list of hundreds
+of events, the user need to specify the lane ID explicitly, e.g.::
+
+ $# perf stat -a -e dwc_rootport_3018/rx_memory_read,lane=4/
+
+The driver does not support sampling, therefore "perf record" will not
+work. Per-task (without "-a") perf sessions are not supported.
diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst
index f60be04e4e33..6bc7739fddb5 100644
--- a/Documentation/admin-guide/perf/index.rst
+++ b/Documentation/admin-guide/perf/index.rst
@@ -19,6 +19,7 @@ Performance monitor support
arm_dsu_pmu
thunderx2-pmu
alibaba_pmu
+ dwc_pcie_pmu
nvidia-pmu
meson-ddr-pmu
cxl
--
2.39.3
The Alibaba Vendor ID (0x1ded) is now used by Alibaba elasticRDMA ("erdma")
and will be shared with the upcoming PCIe PMU ("dwc_pcie_pmu"). Move the
Vendor ID to linux/pci_ids.h so that it can shared by several drivers
later.
Signed-off-by: Shuai Xue <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]> # pci_ids.h
---
drivers/infiniband/hw/erdma/erdma_hw.h | 2 --
include/linux/pci_ids.h | 2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/erdma/erdma_hw.h b/drivers/infiniband/hw/erdma/erdma_hw.h
index 9d316fdc6f9a..a155519a862f 100644
--- a/drivers/infiniband/hw/erdma/erdma_hw.h
+++ b/drivers/infiniband/hw/erdma/erdma_hw.h
@@ -11,8 +11,6 @@
#include <linux/types.h>
/* PCIe device related definition. */
-#define PCI_VENDOR_ID_ALIBABA 0x1ded
-
#define ERDMA_PCI_WIDTH 64
#define ERDMA_FUNC_BAR 0
#define ERDMA_MISX_BAR 2
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 5fb3d4c393a9..d8760daf9e5a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2601,6 +2601,8 @@
#define PCI_VENDOR_ID_TEKRAM 0x1de1
#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
+#define PCI_VENDOR_ID_ALIBABA 0x1ded
+
#define PCI_VENDOR_ID_TEHUTI 0x1fc9
#define PCI_DEVICE_ID_TEHUTI_3009 0x3009
#define PCI_DEVICE_ID_TEHUTI_3010 0x3010
--
2.39.3
On Wed, 15 Nov 2023, Shuai Xue wrote:
> On 2023/11/15 08:07, Ilkka Koskinen wrote:
>>
>> Hi Shuai,
>>
>> On Sat, 4 Nov 2023, Shuai Xue wrote:
>>> This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
>>> for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
>>> Core controller IP which provides statistics feature. The PMU is a PCIe
>>> configuration space register block provided by each PCIe Root Port in a
>>> Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
>>> injection, and Statistics).
>>>
>>> To facilitate collection of statistics the controller provides the
>>> following two features for each Root Port:
>>>
>>> - one 64-bit counter for Time Based Analysis (RX/TX data throughput and
>>> time spent in each low-power LTSSM state) and
>>> - one 32-bit counter for Event Counting (error and non-error events for
>>> a specified lane)
>>>
>>> Note: There is no interrupt for counter overflow.
>>>
>>> This driver adds PMU devices for each PCIe Root Port. And the PMU device is
>>> named based the BDF of Root Port. For example,
>>>
>>> 30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
>>>
>>> the PMU device name for this Root Port is dwc_rootport_3018.
>>>
>>> Example usage of counting PCIe RX TLP data payload (Units of bytes)::
>>>
>>> $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
>>>
>>> average RX bandwidth can be calculated like this:
>>>
>>> PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
>>>
>>> Signed-off-by: Shuai Xue <[email protected]>
>>> Reviewed-by: Baolin Wang <[email protected]>
>>> Reviewed-by: Jonathan Cameron <[email protected]>
>>> Reviewed-by: Yicong Yang <[email protected]>
>>
>> Thanks for the driver! I finally found some time to test your driver on AmpereOne and it seemed to work fine.
>
> Glad to hear that. Could you please explicitly give me you tested-by tag? I could add it in next version.
Sure, I'll reply to the cover letter mail.
>> I had to do a couple of changes though such as adding Ampere vendor ID
and support multiple PCIe domains. Given your driver is already in v10 and you have got quite a few reviewed and acked bys, I wonder if it's better to add my changes to your patches or me to create new patches on top of yours? I'm fine with either. Any thoughts?
>
> I prefer new separate patches, so that we can review them in a new loop.
Sounds good to me.
Cheers, Ilkka
>
>>
>> Cheers, Ilkka
>
> Best Regard,
> Shuai
>
Hi Shuai,
On Sat, 4 Nov 2023, Shuai Xue wrote:
> Change Log
> ==========
>
> - move the &plat_dev->dev to previous line to warp more beautiful (Per Jonathan)
> - rename error label with the same suffix 'err' (Per Jonathan)
> - drop unnecessary else branch and return directly (Per Baolin)
> - warp out set prev_count from dwc_pcie_pmu_set_period (Per Baolin)
> - use PMU_FORMAT_ATTR to simplify format sysfs stuff (Per Will)
> - export pci_clear_and_set_dword() to simplify _enable() functions (Per Will)
> - simplify _read() function by unconditionally calculate with unit in bytes plused if branch for group#1 event (Per Will and Robin)
> - simplify _update() function by unconditionally mask with 64-bit width plused if branch for lane event (Per Will)
> - add type sanity check in _init() (Per Will)
> - test with fuzzing tool before this new version (Per Will)
> - register a platform device for each PCI device to probe RAS_DES PMU cap (Per Robin)
> - add dwc_pcie_vendor_ids to extend vendor id for future added device (Per Krishna)
> - pickup review-by tag from Baolin, Yicong and Jonathan
...
> Shuai Xue (5):
> docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
> PCI: Add Alibaba Vendor ID to linux/pci_ids.h
> PCI: move pci_clear_and_set_dword helper to pci header
> drivers/perf: add DesignWare PCIe PMU driver
> MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
As I mentioned earlier, I successfully tested your patchset with a few
patches on top of it to enable DWC PCIe PMU on AmpereOne. Thus, feel free
to add this tag to all the patches above:
Tested-by: Ilkka Koskinen <[email protected]>
Br, Ilkka
>
> .../admin-guide/perf/dwc_pcie_pmu.rst | 94 +++
> Documentation/admin-guide/perf/index.rst | 1 +
> MAINTAINERS | 7 +
> drivers/infiniband/hw/erdma/erdma_hw.h | 2 -
> drivers/pci/access.c | 12 +
> drivers/pci/pcie/aspm.c | 11 -
> drivers/perf/Kconfig | 7 +
> drivers/perf/Makefile | 1 +
> drivers/perf/dwc_pcie_pmu.c | 798 ++++++++++++++++++
> include/linux/pci.h | 2 +
> include/linux/pci_ids.h | 2 +
> 11 files changed, 924 insertions(+), 13 deletions(-)
> create mode 100644 Documentation/admin-guide/perf/dwc_pcie_pmu.rst
> create mode 100644 drivers/perf/dwc_pcie_pmu.c
>
> --
> 2.39.3
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
On 2023/11/16 08:57, Ilkka Koskinen wrote:
>
> Hi Shuai,
>
> On Sat, 4 Nov 2023, Shuai Xue wrote:
>> Change Log
>> ==========
>>
>> - move the &plat_dev->dev to previous line to warp more beautiful (Per Jonathan)
>> - rename error label with the same suffix 'err' (Per Jonathan)
>> - drop unnecessary else branch and return directly (Per Baolin)
>> - warp out set prev_count from dwc_pcie_pmu_set_period (Per Baolin)
>> - use PMU_FORMAT_ATTR to simplify format sysfs stuff (Per Will)
>> - export pci_clear_and_set_dword() to simplify _enable() functions (Per Will)
>> - simplify _read() function by unconditionally calculate with unit in bytes plused if branch for group#1 event (Per Will and Robin)
>> - simplify _update() function by unconditionally mask with 64-bit width plused if branch for lane event (Per Will)
>> - add type sanity check in _init() (Per Will)
>> - test with fuzzing tool before this new version (Per Will)
>> - register a platform device for each PCI device to probe RAS_DES PMU cap (Per Robin)
>> - add dwc_pcie_vendor_ids to extend vendor id for future added device (Per Krishna)
>> - pickup review-by tag from Baolin, Yicong and Jonathan
>
> ...
>
>> Shuai Xue (5):
>> docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
>> PCI: Add Alibaba Vendor ID to linux/pci_ids.h
>> PCI: move pci_clear_and_set_dword helper to pci header
>> drivers/perf: add DesignWare PCIe PMU driver
>> MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
>
> As I mentioned earlier, I successfully tested your patchset with a few patches on top of it to enable DWC PCIe PMU on AmpereOne. Thus, feel free to add this tag to all the patches above:
>
> Tested-by: Ilkka Koskinen <[email protected]>
>
> Br, Ilkka
Hi, Ilkka,
Thank you.
I will add your tested-by tag in the upcoming version v11. However, I
kindly request some time to wait for feedback from esteemed maintainers such
as Will, and Robin.
Cheers,
Shuai
On Thu, 16 Nov 2023, Shuai Xue wrote:
> On 2023/11/16 08:57, Ilkka Koskinen wrote:
>>
>> Hi Shuai,
>>
>> On Sat, 4 Nov 2023, Shuai Xue wrote:
>>> Change Log
>>> ==========
>>>
>>> - move the &plat_dev->dev to previous line to warp more beautiful (Per Jonathan)
>>> - rename error label with the same suffix 'err' (Per Jonathan)
>>> - drop unnecessary else branch and return directly (Per Baolin)
>>> - warp out set prev_count from dwc_pcie_pmu_set_period (Per Baolin)
>>> - use PMU_FORMAT_ATTR to simplify format sysfs stuff (Per Will)
>>> - export pci_clear_and_set_dword() to simplify _enable() functions (Per Will)
>>> - simplify _read() function by unconditionally calculate with unit in bytes plused if branch for group#1 event (Per Will and Robin)
>>> - simplify _update() function by unconditionally mask with 64-bit width plused if branch for lane event (Per Will)
>>> - add type sanity check in _init() (Per Will)
>>> - test with fuzzing tool before this new version (Per Will)
>>> - register a platform device for each PCI device to probe RAS_DES PMU cap (Per Robin)
>>> - add dwc_pcie_vendor_ids to extend vendor id for future added device (Per Krishna)
>>> - pickup review-by tag from Baolin, Yicong and Jonathan
>>
>> ...
>>
>>> Shuai Xue (5):
>>> docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
>>> PCI: Add Alibaba Vendor ID to linux/pci_ids.h
>>> PCI: move pci_clear_and_set_dword helper to pci header
>>> drivers/perf: add DesignWare PCIe PMU driver
>>> MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
>>
>> As I mentioned earlier, I successfully tested your patchset with a few patches on top of it to enable DWC PCIe PMU on AmpereOne. Thus, feel free to add this tag to all the patches above:
>>
>> Tested-by: Ilkka Koskinen <[email protected]>
>>
>> Br, Ilkka
>
> Hi, Ilkka,
>
> Thank you.
>
> I will add your tested-by tag in the upcoming version v11. However, I
> kindly request some time to wait for feedback from esteemed maintainers such
> as Will, and Robin.
Sounds good. Actually, I can give you a little feedback on the driver
patch meanwhile.
--Ilkka
>
> Cheers,
> Shuai
>
Hi Shuai,
I have a few comments below
On Sat, 4 Nov 2023, Shuai Xue wrote:
> This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
> for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
> Core controller IP which provides statistics feature. The PMU is a PCIe
> configuration space register block provided by each PCIe Root Port in a
> Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
> injection, and Statistics).
>
> To facilitate collection of statistics the controller provides the
> following two features for each Root Port:
>
> - one 64-bit counter for Time Based Analysis (RX/TX data throughput and
> time spent in each low-power LTSSM state) and
> - one 32-bit counter for Event Counting (error and non-error events for
> a specified lane)
>
> Note: There is no interrupt for counter overflow.
>
> This driver adds PMU devices for each PCIe Root Port. And the PMU device is
> named based the BDF of Root Port. For example,
>
> 30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
>
> the PMU device name for this Root Port is dwc_rootport_3018.
>
> Example usage of counting PCIe RX TLP data payload (Units of bytes)::
>
> $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
>
> average RX bandwidth can be calculated like this:
>
> PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
>
> Signed-off-by: Shuai Xue <[email protected]>
> Reviewed-by: Baolin Wang <[email protected]>
> Reviewed-by: Jonathan Cameron <[email protected]>
> Reviewed-by: Yicong Yang <[email protected]>
> ---
> drivers/perf/Kconfig | 7 +
> drivers/perf/Makefile | 1 +
> drivers/perf/dwc_pcie_pmu.c | 798 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 806 insertions(+)
> create mode 100644 drivers/perf/dwc_pcie_pmu.c
...
> diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c
> new file mode 100644
> index 000000000000..9485c41de322
> --- /dev/null
> +++ b/drivers/perf/dwc_pcie_pmu.c
> @@ -0,0 +1,798 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Synopsys DesignWare PCIe PMU driver
> + *
> + * Copyright (C) 2021-2023 Alibaba Inc.
> + */
> +
...
> +static void dwc_pcie_pmu_time_based_event_enable(struct dwc_pcie_pmu *pcie_pmu,
> + bool enable)
> +{
> + struct pci_dev *pdev = pcie_pmu->pdev;
> + u16 ras_des_offset = pcie_pmu->ras_des_offset;
> +
> + if (enable)
> + pci_clear_and_set_dword(pdev,
> + ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
> + DWC_PCIE_TIME_BASED_TIMER_START, 0x1);
> + else
> + pci_clear_and_set_dword(pdev,
> + ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
> + DWC_PCIE_TIME_BASED_TIMER_START, 0x0);
It's a matter of taste, but you could simply do:
pci_clear_and_set_dword(pdev,
ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
DWC_PCIE_TIME_BASED_TIMER_START, enable);
However, I'm fine with either way.
> +static u64 dwc_pcie_pmu_read_lane_event_counter(struct perf_event *event)
> +{
> + struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
> + struct pci_dev *pdev = pcie_pmu->pdev;
> + u16 ras_des_offset = pcie_pmu->ras_des_offset;
> + u32 val;
> +
> + pci_read_config_dword(pdev, ras_des_offset + DWC_PCIE_EVENT_CNT_DATA, &val);
> +
> + return val;
> +}
...
> +static int dwc_pcie_register_dev(struct pci_dev *pdev)
> +{
> + struct platform_device *plat_dev;
> + struct dwc_pcie_dev_info *dev_info;
> + int ret;
> + u32 bdf;
> +
> + bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
> + plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf,
> + pdev, sizeof(*pdev));
> + ret = PTR_ERR_OR_ZERO(plat_dev);
> + if (ret)
> + return ret;
platform_device_register_data() doesn't return a null pointer and you
don't really need 'ret'. You could do something like instead:
if (IS_ERR(plat_dev))
return PTR_ERR(plat_dev);
> + dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
> + if (!dev_info)
> + return -ENOMEM;
> +
> + /* Cache platform device to handle pci device hotplug */
> + dev_info->plat_dev = plat_dev;
> + dev_info->pdev = pdev;
> + list_add(&dev_info->dev_node, &dwc_pcie_dev_info_head);
> +
> + return 0;
> +}
> +
> +static int dwc_pcie_pmu_notifier(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct device *dev = data;
> + struct pci_dev *pdev = to_pci_dev(dev);
> + struct dwc_pcie_dev_info *dev_info;
> +
> + switch (action) {
> + case BUS_NOTIFY_ADD_DEVICE:
> + if (!dwc_pcie_match_des_cap(pdev))
> + return NOTIFY_DONE;
> + if (dwc_pcie_register_dev(pdev))
> + return NOTIFY_BAD;
> + break;
> + case BUS_NOTIFY_DEL_DEVICE:
> + dev_info = dwc_pcie_find_dev_info(pdev);
> + if (!dev_info)
> + return NOTIFY_DONE;
> + dwc_pcie_unregister_dev(dev_info);
> + break;
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> +static struct notifier_block dwc_pcie_pmu_nb = {
> + .notifier_call = dwc_pcie_pmu_notifier,
> +};
> +
> +static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
> +{
> + struct pci_dev *pdev = plat_dev->dev.platform_data;
> + struct dwc_pcie_pmu *pcie_pmu;
> + char *name;
> + u32 bdf, val;
> + u16 vsec;
> + int ret;
> +
> + vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_ALIBABA,
> + DWC_PCIE_VSEC_RAS_DES_ID);
You nicely changed to use vendor list in this version but here the driver
still tries to find Alibaba specific capability. I guess, you could search
again using the vendor list. The other option would be to make
dwc_pcie_match_des_cap() to return the vendor id, pass it to
dwc_pcie_register_dev(), which would add it to device's platform data with
the pointer to the pci device.
Cheers, Ilkka
> + pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val);
> + bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
> + name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", bdf);
> + if (!name)
> + return -ENOMEM;
> +
> + pcie_pmu = devm_kzalloc(&plat_dev->dev, sizeof(*pcie_pmu), GFP_KERNEL);
> + if (!pcie_pmu)
> + return -ENOMEM;
> +
> + pcie_pmu->pdev = pdev;
> + pcie_pmu->ras_des_offset = vsec;
> + pcie_pmu->nr_lanes = pcie_get_width_cap(pdev);
> + pcie_pmu->on_cpu = -1;
> + pcie_pmu->pmu = (struct pmu){
> + .name = name,
> + .parent = &pdev->dev,
> + .module = THIS_MODULE,
> + .attr_groups = dwc_pcie_attr_groups,
> + .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
> + .task_ctx_nr = perf_invalid_context,
> + .event_init = dwc_pcie_pmu_event_init,
> + .add = dwc_pcie_pmu_event_add,
> + .del = dwc_pcie_pmu_event_del,
> + .start = dwc_pcie_pmu_event_start,
> + .stop = dwc_pcie_pmu_event_stop,
> + .read = dwc_pcie_pmu_event_update,
> + };
> +
> + /* Add this instance to the list used by the offline callback */
> + ret = cpuhp_state_add_instance(dwc_pcie_pmu_hp_state,
> + &pcie_pmu->cpuhp_node);
> + if (ret) {
> + pci_err(pdev, "Error %d registering hotplug @%x\n", ret, bdf);
> + return ret;
> + }
> +
> + /* Unwind when platform driver removes */
> + ret = devm_add_action_or_reset(&plat_dev->dev,
> + dwc_pcie_pmu_remove_cpuhp_instance,
> + &pcie_pmu->cpuhp_node);
> + if (ret)
> + return ret;
> +
> + ret = perf_pmu_register(&pcie_pmu->pmu, name, -1);
> + if (ret) {
> + pci_err(pdev, "Error %d registering PMU @%x\n", ret, bdf);
> + return ret;
> + }
> + ret = devm_add_action_or_reset(&plat_dev->dev, dwc_pcie_unregister_pmu,
> + pcie_pmu);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
On 2023/11/16 11:50, Ilkka Koskinen wrote:
>
> Hi Shuai,
>
> I have a few comments below
>
>
...
>
>> +static void dwc_pcie_pmu_time_based_event_enable(struct dwc_pcie_pmu *pcie_pmu,
>> + bool enable)
>> +{
>> + struct pci_dev *pdev = pcie_pmu->pdev;
>> + u16 ras_des_offset = pcie_pmu->ras_des_offset;
>> +
>> + if (enable)
>> + pci_clear_and_set_dword(pdev,
>> + ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
>> + DWC_PCIE_TIME_BASED_TIMER_START, 0x1);
>> + else
>> + pci_clear_and_set_dword(pdev,
>> + ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
>> + DWC_PCIE_TIME_BASED_TIMER_START, 0x0);
>
> It's a matter of taste, but you could simply do:
>
> pci_clear_and_set_dword(pdev,
> ras_des_offset + DWC_PCIE_TIME_BASED_ANAL_CTL,
> DWC_PCIE_TIME_BASED_TIMER_START, enable);
>
>
> However, I'm fine with either way.
Good suggestion, will fix it.
>
>> +static u64 dwc_pcie_pmu_read_lane_event_counter(struct perf_event *event)
>> +{
>> + struct dwc_pcie_pmu *pcie_pmu = to_dwc_pcie_pmu(event->pmu);
>> + struct pci_dev *pdev = pcie_pmu->pdev;
>> + u16 ras_des_offset = pcie_pmu->ras_des_offset;
>> + u32 val;
>> +
>> + pci_read_config_dword(pdev, ras_des_offset + DWC_PCIE_EVENT_CNT_DATA, &val);
>> +
>> + return val;
>> +}
>
> ...
>
>> +static int dwc_pcie_register_dev(struct pci_dev *pdev)
>> +{
>> + struct platform_device *plat_dev;
>> + struct dwc_pcie_dev_info *dev_info;
>> + int ret;
>> + u32 bdf;
>> +
>> + bdf = PCI_DEVID(pdev->bus->number, pdev->devfn);
>> + plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf,
>> + pdev, sizeof(*pdev));
>> + ret = PTR_ERR_OR_ZERO(plat_dev);
>> + if (ret)
>> + return ret;
>
> platform_device_register_data() doesn't return a null pointer and you don't really need 'ret'. You could do something like instead:
>
> if (IS_ERR(plat_dev))
> return PTR_ERR(plat_dev);
>
>> + dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
>> + if (!dev_info)
>> + return -ENOMEM;
>> +
>> + /* Cache platform device to handle pci device hotplug */
>> + dev_info->plat_dev = plat_dev;
>> + dev_info->pdev = pdev;
>> + list_add(&dev_info->dev_node, &dwc_pcie_dev_info_head);
>> +
>> + return 0;
>> +}
>> +
>> +static int dwc_pcie_pmu_notifier(struct notifier_block *nb,
>> + unsigned long action, void *data)
>> +{
>> + struct device *dev = data;
>> + struct pci_dev *pdev = to_pci_dev(dev);
>> + struct dwc_pcie_dev_info *dev_info;
>> +
>> + switch (action) {
>> + case BUS_NOTIFY_ADD_DEVICE:
>> + if (!dwc_pcie_match_des_cap(pdev))
>> + return NOTIFY_DONE;
>> + if (dwc_pcie_register_dev(pdev))
>> + return NOTIFY_BAD;
>> + break;
>> + case BUS_NOTIFY_DEL_DEVICE:
>> + dev_info = dwc_pcie_find_dev_info(pdev);
>> + if (!dev_info)
>> + return NOTIFY_DONE;
>> + dwc_pcie_unregister_dev(dev_info);
>> + break;
>> + }
>> +
>> + return NOTIFY_OK;
>> +}
>> +
>> +static struct notifier_block dwc_pcie_pmu_nb = {
>> + .notifier_call = dwc_pcie_pmu_notifier,
>> +};
>> +
>> +static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
>> +{
>> + struct pci_dev *pdev = plat_dev->dev.platform_data;
>> + struct dwc_pcie_pmu *pcie_pmu;
>> + char *name;
>> + u32 bdf, val;
>> + u16 vsec;
>> + int ret;
>> +
>> + vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_ALIBABA,
>> + DWC_PCIE_VSEC_RAS_DES_ID);
>
> You nicely changed to use vendor list in this version but here the driver still tries to find Alibaba specific capability.
Sorry, I missed here.
> I guess, you could search again using the vendor list. The other option would be to make dwc_pcie_match_des_cap() to return the vendor id, pass it to dwc_pcie_register_dev(), which would add it to device's platform data with
> the pointer to the pci device.
The dwc_pcie_pmu_probe() is called by device which has DWC_PCIE_VSEC_RAS_DES_ID cap.
So I guess I can use pdev->vendor directly here, e.g?
pci_find_vsec_capability(pdev, pdev->vendor, DWC_PCIE_VSEC_RAS_DES_ID);
Best Regards,
Shuai
On Thu, 16 Nov 2023, Shuai Xue wrote:
> On 2023/11/16 11:50, Ilkka Koskinen wrote:
>>> +static int dwc_pcie_pmu_probe(struct platform_device *plat_dev)
>>> +{
>>> + struct pci_dev *pdev = plat_dev->dev.platform_data;
>>> + struct dwc_pcie_pmu *pcie_pmu;
>>> + char *name;
>>> + u32 bdf, val;
>>> + u16 vsec;
>>> + int ret;
>>> +
>>> + vsec = pci_find_vsec_capability(pdev, PCI_VENDOR_ID_ALIBABA,
>>> + DWC_PCIE_VSEC_RAS_DES_ID);
>>
>> You nicely changed to use vendor list in this version but here the driver still tries to find Alibaba specific capability.
>
> Sorry, I missed here.
>
>> I guess, you could search again using the vendor list. The other option would be to make dwc_pcie_match_des_cap() to return the vendor id, pass it to dwc_pcie_register_dev(), which would add it to device's platform data with
>> the pointer to the pci device.
>
> The dwc_pcie_pmu_probe() is called by device which has DWC_PCIE_VSEC_RAS_DES_ID cap.
> So I guess I can use pdev->vendor directly here, e.g?
>
> pci_find_vsec_capability(pdev, pdev->vendor, DWC_PCIE_VSEC_RAS_DES_ID);
Oh, right. That seems correct.
Cheers, Ilkka
>
> Best Regards,
> Shuai
>