The hardware blink logic works for both Power State and Software
controlled LEDs.
Just like brightness, there is one different blink behavior
per different power state. Due to that, the logic is somewhat
more complex than what it would be expected otherwise.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
drivers/leds/leds-nuc.c | 347 +++++++++++++++++++++++++++++++++++++---
1 file changed, 322 insertions(+), 25 deletions(-)
diff --git a/drivers/leds/leds-nuc.c b/drivers/leds/leds-nuc.c
index 03fa8bafc5de..a5eb625d7b51 100644
--- a/drivers/leds/leds-nuc.c
+++ b/drivers/leds/leds-nuc.c
@@ -530,18 +530,30 @@ static ssize_t nuc_wmi_set_brightness_offset(struct device *dev,
#define LED_ATTR_RW(_name) \
DEVICE_ATTR(_name, 0644, show_##_name, store_##_name)
-#define LED_ATTR_POWER_STATE_RW(_name, offset) \
+#define LED_ATTR_POWER_STATE_RW(_name, _offname, _offset) \
static ssize_t show_##_name(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
- return show_brightness_offset(dev, attr, offset, buf); \
+ struct led_classdev *cdev = dev_get_drvdata(dev); \
+ struct nuc_nmi_led *led; \
+ \
+ led = container_of(cdev, struct nuc_nmi_led, cdev); \
+ if (led->indicator != LED_IND_POWER_STATE) \
+ return -ENODEV; \
+ return offset_show_##_offname(dev, attr, _offset, buf); \
} \
static ssize_t store_##_name(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t len) \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
{ \
- return store_brightness_offset(dev, attr, offset, buf, len); \
+ struct led_classdev *cdev = dev_get_drvdata(dev); \
+ struct nuc_nmi_led *led; \
+ \
+ led = container_of(cdev, struct nuc_nmi_led, cdev); \
+ if (led->indicator != LED_IND_POWER_STATE) \
+ return -ENODEV; \
+ return offset_store_##_offname(dev, attr, _offset, buf, len); \
} \
static DEVICE_ATTR(_name, 0644, show_##_name, store_##_name)
@@ -684,7 +696,7 @@ static ssize_t nuc6_store_color(struct device *dev,
const char *tmp;
int ret, color;
- tmp = strsep((char **)&buf, ",\n");
+ tmp = strsep((char **)&buf, "\n");
if (led->id == POWER_LED) {
for (color = ARRAY_SIZE(nuc6_power_colors)+1; color >= 0; color--)
@@ -1003,7 +1015,7 @@ static umode_t nuc_wmi_led_color_is_visible(struct kobject *kobj,
}
/* Show/store brightness */
-static ssize_t show_brightness_offset(struct device *dev,
+static ssize_t offset_show_brightness(struct device *dev,
struct device_attribute *attr,
u8 offset,
char *buf)
@@ -1012,9 +1024,6 @@ static ssize_t show_brightness_offset(struct device *dev,
struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
int ret;
- if (led->indicator != LED_IND_POWER_STATE)
- return -ENODEV;
-
offset *= led->reg_table[led->indicator][LED_FUNC_POWER_STATE_NUM_CTRLS];
ret = nuc_wmi_get_brightness_offset(dev, led, offset);
@@ -1024,7 +1033,7 @@ static ssize_t show_brightness_offset(struct device *dev,
return scnprintf(buf, PAGE_SIZE, "%d\n", ret);
}
-static ssize_t store_brightness_offset(struct device *dev,
+static ssize_t offset_store_brightness(struct device *dev,
struct device_attribute *attr,
u8 offset,
const char *buf, size_t len)
@@ -1034,9 +1043,6 @@ static ssize_t store_brightness_offset(struct device *dev,
int ret;
u8 val;
- if (led->indicator != LED_IND_POWER_STATE)
- return -ENODEV;
-
if (kstrtou8(buf, 0, &val) || val > 100)
return -EINVAL;
@@ -1070,6 +1076,8 @@ static int nuc_wmi_set_brightness(struct led_classdev *cdev,
return nuc_wmi_set_brightness_offset(cdev->dev, led, 0, brightness);
}
+#define cmp_attr_prefix(a, b) strncmp(a, b, strlen(b))
+
static umode_t nuc_wmi_led_power_state_is_visible(struct kobject *kobj,
struct attribute *attr,
int idx)
@@ -1077,33 +1085,297 @@ static umode_t nuc_wmi_led_power_state_is_visible(struct kobject *kobj,
struct device *dev = kobj_to_dev(kobj);
struct led_classdev *cdev = dev_get_drvdata(dev);
struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
-
umode_t mode = attr->mode;
- if (!strcmp(attr->name, "s0_brightness") ||
- !strcmp(attr->name, "s3_brightness"))
+ if (!cmp_attr_prefix(attr->name, "s0_") ||
+ !cmp_attr_prefix(attr->name, "s3_"))
return mode;
if (led->api_rev == LED_API_REV_0_64) {
- if (!strcmp(attr->name, "s5_brightness") ||
- !strcmp(attr->name, "ready_mode_brightness"))
+ if (!cmp_attr_prefix(attr->name, "s5_") ||
+ !cmp_attr_prefix(attr->name, "ready_mode_"))
return mode;
} else {
- if (!strcmp(attr->name, "standby_brightness"))
+ if (!cmp_attr_prefix(attr->name, "standby_"))
return mode;
}
return 0;
}
+/* Blink */
+static const char * const led_blink_behaviors[] = {
+ "solid",
+ "breathing",
+ "pulsing",
+ "strobing"
+};
+
+static const char * const led_blink_frequencies[] = {
+ "0.1",
+ "0.2",
+ "0.3",
+ "0.4",
+ "0.5",
+ "0.6",
+ "0.7",
+ "0.8",
+ "0.9",
+ "1.0",
+};
+
+static ssize_t offset_show_blink_behavior(struct device *dev,
+ struct device_attribute *attr,
+ u8 offset,
+ char *buf)
+{
+ struct led_classdev *cdev = dev_get_drvdata(dev);
+ struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
+ u8 input[NUM_INPUT_ARGS];
+ u8 output[NUM_OUTPUT_ARGS];
+ int ret, ctrl, val, i, n;
+ int size = PAGE_SIZE;
+ char *p = buf;
+
+ if (led->indicator == LED_IND_DISABLE)
+ return -ENODEV;
+
+ offset *= led->reg_table[led->indicator][LED_FUNC_POWER_STATE_NUM_CTRLS];
+ ctrl = led->reg_table[led->indicator][LED_FUNC_BLINK_BEHAVIOR] + offset;
+
+ if (!nuc_wmi_test_control(dev, led, ctrl))
+ return -ENODEV;
+
+ input[0] = LED_NEW_GET_CONTROL_ITEM;
+ input[1] = led->id;
+ input[2] = led->indicator;
+ input[3] = ctrl;
+
+ ret = nuc_nmi_cmd(dev, LED_NEW_GET_STATUS, input, output);
+ if (ret)
+ return ret;
+
+ val = output[0];
+
+ for (i = 0; i < ARRAY_SIZE(led_blink_behaviors); i++) {
+ if (i == val)
+ n = scnprintf(p, size, "[%s] ", led_blink_behaviors[i]);
+ else
+ n = scnprintf(p, size, "%s ", led_blink_behaviors[i]);
+ p += n;
+ size -= n;
+ }
+ size -= scnprintf(p, size, "\n");
+
+ return PAGE_SIZE - size;
+}
+
+static ssize_t offset_store_blink_behavior(struct device *dev,
+ struct device_attribute *attr,
+ u8 offset,
+ const char *buf, size_t len)
+{
+ struct led_classdev *cdev = dev_get_drvdata(dev);
+ struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
+ u8 input[NUM_INPUT_ARGS] = { 0 };
+ int ctrl, val, ret;
+ const char *tmp;
+
+ if (led->indicator == LED_IND_DISABLE)
+ return -ENODEV;
+
+
+ if (led->id != LED_IND_SOFTWARE && led->id != LED_IND_POWER_STATE)
+ return -ENODEV;
+
+ offset *= led->reg_table[led->indicator][LED_FUNC_POWER_STATE_NUM_CTRLS];
+ ctrl = led->reg_table[led->indicator][LED_FUNC_BLINK_BEHAVIOR] + offset;
+
+ if (!nuc_wmi_test_control(dev, led, ctrl))
+ return -ENODEV;
+
+ tmp = strsep((char **)&buf, "\n");
+
+ for (val = 0; val < ARRAY_SIZE(led_blink_behaviors); val++)
+ if (!strcasecmp(tmp, led_blink_behaviors[val]))
+ break;
+
+ if (val >= ARRAY_SIZE(led_blink_behaviors))
+ return -EINVAL;
+
+ input[0] = led->id;
+ input[1] = led->indicator;
+ input[2] = ctrl;
+ input[3] = val;
+
+ ret = nuc_nmi_cmd(dev, LED_SET_VALUE, input, NULL);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t show_blink_behavior(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return offset_show_blink_behavior(dev, attr, 0, buf);
+}
+
+static ssize_t store_blink_behavior(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ return offset_store_blink_behavior(dev, attr, 0, buf, len);
+}
+
+static ssize_t offset_show_blink_frequency(struct device *dev,
+ struct device_attribute *attr,
+ u8 offset,
+ char *buf)
+{
+ struct led_classdev *cdev = dev_get_drvdata(dev);
+ struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
+ u8 input[NUM_INPUT_ARGS];
+ u8 output[NUM_OUTPUT_ARGS];
+ int ret, ctrl, val, i, n;
+ int size = PAGE_SIZE;
+ char *p = buf;
+
+ if (led->indicator == LED_IND_DISABLE)
+ return -ENODEV;
+
+ offset *= led->reg_table[led->indicator][LED_FUNC_POWER_STATE_NUM_CTRLS];
+ ctrl = led->reg_table[led->indicator][LED_FUNC_BLINK_BEHAVIOR] + offset;
+
+ if (!nuc_wmi_test_control(dev, led, ctrl))
+ return -ENODEV;
+
+ input[0] = LED_NEW_GET_CONTROL_ITEM;
+ input[1] = led->id;
+ input[2] = led->indicator;
+ input[3] = ctrl;
+
+ ret = nuc_nmi_cmd(dev, LED_NEW_GET_STATUS, input, output);
+ if (ret)
+ return ret;
+
+ val = output[0];
+
+ for (i = 0; i < ARRAY_SIZE(led_blink_frequencies); i++) {
+ if (i == val)
+ n = scnprintf(p, size, "[%s] ", led_blink_frequencies[i]);
+ else
+ n = scnprintf(p, size, "%s ", led_blink_frequencies[i]);
+ p += n;
+ size -= n;
+ }
+ size -= scnprintf(p, size, "\n");
+
+ return PAGE_SIZE - size;
+}
+
+static ssize_t offset_store_blink_frequency(struct device *dev,
+ struct device_attribute *attr,
+ u8 offset,
+ const char *buf, size_t len)
+{
+ struct led_classdev *cdev = dev_get_drvdata(dev);
+ struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
+ u8 input[NUM_INPUT_ARGS] = { 0 };
+ int ctrl, val, ret;
+ const char *tmp;
+
+ if (led->indicator == LED_IND_DISABLE)
+ return -ENODEV;
+
+
+ if (led->id != LED_IND_SOFTWARE && led->id != LED_IND_POWER_STATE)
+ return -ENODEV;
+
+ offset *= led->reg_table[led->indicator][LED_FUNC_POWER_STATE_NUM_CTRLS];
+ ctrl = led->reg_table[led->indicator][LED_FUNC_BLINK_BEHAVIOR] + offset;
+
+ if (!nuc_wmi_test_control(dev, led, ctrl))
+ return -ENODEV;
+
+ tmp = strsep((char **)&buf, "\n");
+
+ for (val = 0; val < ARRAY_SIZE(led_blink_frequencies); val++)
+ if (!strcasecmp(tmp, led_blink_frequencies[val]))
+ break;
+
+ if (val >= ARRAY_SIZE(led_blink_frequencies))
+ return -EINVAL;
+
+ input[0] = led->id;
+ input[1] = led->indicator;
+ input[2] = ctrl;
+ input[3] = val + 1;
+
+ ret = nuc_nmi_cmd(dev, LED_SET_VALUE, input, NULL);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static ssize_t show_blink_frequency(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return offset_show_blink_frequency(dev, attr, 0, buf);
+}
+
+static ssize_t store_blink_frequency(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ return offset_store_blink_frequency(dev, attr, 0, buf, len);
+}
+
+static umode_t nuc_wmi_led_blink_is_visible(struct kobject *kobj,
+ struct attribute *attr, int idx)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct led_classdev *cdev = dev_get_drvdata(dev);
+ struct nuc_nmi_led *led = container_of(cdev, struct nuc_nmi_led, cdev);
+ umode_t mode = attr->mode;
+
+ // TODO: implement for NUC6 API
+ if (led->api_rev == LED_API_NUC6)
+ return 0;
+
+ if (led->id == LED_IND_SOFTWARE)
+ return mode;
+
+ return 0;
+}
+
static LED_ATTR_RW(indicator);
static LED_ATTR_RW(color);
+static LED_ATTR_RW(blink_behavior);
+static LED_ATTR_RW(blink_frequency);
-LED_ATTR_POWER_STATE_RW(s0_brightness, 0);
-LED_ATTR_POWER_STATE_RW(s3_brightness, 1);
-LED_ATTR_POWER_STATE_RW(s5_brightness, 2); // Rev 0.64
-LED_ATTR_POWER_STATE_RW(standby_brightness, 2); // Rev 1.0
-LED_ATTR_POWER_STATE_RW(ready_mode_brightness, 3); // Rev 1.0
+LED_ATTR_POWER_STATE_RW(s0_brightness, brightness, 0);
+LED_ATTR_POWER_STATE_RW(s0_blink_behavior, blink_behavior, 0);
+LED_ATTR_POWER_STATE_RW(s0_blink_frequency, blink_frequency, 0);
+LED_ATTR_POWER_STATE_RW(s3_brightness, brightness, 1);
+LED_ATTR_POWER_STATE_RW(s3_blink_behavior, blink_behavior, 1);
+LED_ATTR_POWER_STATE_RW(s3_blink_frequency, blink_frequency, 1);
+
+/* Rev 0.64 */
+LED_ATTR_POWER_STATE_RW(s5_brightness, brightness, 2);
+LED_ATTR_POWER_STATE_RW(s5_blink_behavior, blink_behavior, 2);
+LED_ATTR_POWER_STATE_RW(s5_blink_frequency, blink_frequency, 2);
+LED_ATTR_POWER_STATE_RW(ready_mode_brightness, brightness, 3);
+LED_ATTR_POWER_STATE_RW(ready_mode_blink_behavior, blink_behavior, 3);
+LED_ATTR_POWER_STATE_RW(ready_mode_blink_frequency, blink_frequency, 3);
+
+/* Rev 1.0 */
+LED_ATTR_POWER_STATE_RW(standby_brightness, brightness, 2);
+LED_ATTR_POWER_STATE_RW(standby_blink_behavior, blink_behavior, 2);
+LED_ATTR_POWER_STATE_RW(standby_blink_frequency, blink_frequency, 2);
/*
* Attributes for LEDs
@@ -1124,6 +1396,19 @@ static struct attribute *nuc_wmi_led_power_state_attr[] = {
&dev_attr_standby_brightness.attr,
&dev_attr_s5_brightness.attr,
&dev_attr_ready_mode_brightness.attr,
+
+ &dev_attr_s0_blink_behavior.attr,
+ &dev_attr_s3_blink_behavior.attr,
+ &dev_attr_standby_blink_behavior.attr,
+ &dev_attr_s5_blink_behavior.attr,
+ &dev_attr_ready_mode_blink_behavior.attr,
+
+ &dev_attr_s0_blink_frequency.attr,
+ &dev_attr_s3_blink_frequency.attr,
+ &dev_attr_standby_blink_frequency.attr,
+ &dev_attr_s5_blink_frequency.attr,
+ &dev_attr_ready_mode_blink_frequency.attr,
+
NULL,
};
@@ -1142,10 +1427,22 @@ static const struct attribute_group nuc_wmi_led_color_attribute_group = {
.attrs = nuc_wmi_led_color_attr,
};
+static struct attribute *nuc_wmi_led_blink_behavior_attr[] = {
+ &dev_attr_blink_behavior.attr,
+ &dev_attr_blink_frequency.attr,
+ NULL,
+};
+
+static const struct attribute_group nuc_wmi_led_blink_attribute_group = {
+ .is_visible = nuc_wmi_led_blink_is_visible,
+ .attrs = nuc_wmi_led_blink_behavior_attr,
+};
+
static const struct attribute_group *nuc_wmi_led_attribute_groups[] = {
&nuc_wmi_led_attribute_group,
&nuc_wmi_led_power_state_group,
&nuc_wmi_led_color_attribute_group,
+ &nuc_wmi_led_blink_attribute_group,
NULL
};
--
2.31.1
This should be implemented via the blink trigger or hw_pattern, I think.
Have you looked at these?
Marek
Em Wed, 19 May 2021 09:58:50 +0200
Marek Behun <[email protected]> escreveu:
> This should be implemented via the blink trigger or hw_pattern, I think.
> Have you looked at these?
The blink trigger and hw_pattern are software implementations for blink.
This is not the case on NUC leds, as:
1. It is the hardware/firmware that triggers the blink, not Linux;
2. It blinks even when Linux in suspend/hibernate mode.
In a matter of fact, the default usage of blink is to indicate that the
machine is suspended.
Thanks,
Mauro