2021-06-24 22:38:04

by Riccardo Mancini

[permalink] [raw]
Subject: [PATCH v2] perf annotate: allow 's' on source code lines

In perf annotate, when 's' is pressed on a line containing
source code, it shows the message "Only available for assembly
lines".
This patch gets rid of the error, moving the cursr to the next
available asm line (or the closest previous one if no asm line
is found moving forwards), before hiding source code lines.

Changes in v2:
- handle case of no asm line found in
annotate_browser__find_next_asm_line by returning NULL and
handling error in caller.

Signed-off-by: Riccardo Mancini <[email protected]>
---
tools/perf/ui/browsers/annotate.c | 32 ++++++++++++++++++++++++++++---
1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/tools/perf/ui/browsers/annotate.c b/tools/perf/ui/browsers/annotate.c
index ad0a70f0edaf..f5509a958e38 100644
--- a/tools/perf/ui/browsers/annotate.c
+++ b/tools/perf/ui/browsers/annotate.c
@@ -343,6 +343,29 @@ static void annotate_browser__calc_percent(struct annotate_browser *browser,
browser->curr_hot = rb_last(&browser->entries);
}

+static struct annotation_line *annotate_browser__find_next_asm_line(
+ struct annotate_browser *browser,
+ struct annotation_line *al)
+{
+ struct annotation_line *it = al;
+
+ /* find next asm line */
+ list_for_each_entry_continue(it, browser->b.top, node) {
+ if (it->idx_asm >= 0)
+ return it;
+ }
+
+ /* no asm line found forwards, try backwards */
+ it = al;
+ list_for_each_entry_continue_reverse(it, browser->b.top, node) {
+ if (it->idx_asm >= 0)
+ return it;
+ }
+
+ /* There are no asm lines */
+ return NULL;
+}
+
static bool annotate_browser__toggle_source(struct annotate_browser *browser)
{
struct annotation *notes = browser__annotation(&browser->b);
@@ -363,9 +386,12 @@ static bool annotate_browser__toggle_source(struct annotate_browser *browser)
browser->b.index = al->idx;
} else {
if (al->idx_asm < 0) {
- ui_helpline__puts("Only available for assembly lines.");
- browser->b.seek(&browser->b, -offset, SEEK_CUR);
- return false;
+ /* move cursor to next asm line */
+ al = annotate_browser__find_next_asm_line(browser, al);
+ if (!al) {
+ browser->b.seek(&browser->b, -offset, SEEK_CUR);
+ return false;
+ }
}

if (al->idx_asm < offset)
--
2.31.1


2021-06-25 05:37:58

by Ian Rogers

[permalink] [raw]
Subject: Re: [PATCH v2] perf annotate: allow 's' on source code lines

On Thu, Jun 24, 2021 at 3:37 PM Riccardo Mancini <[email protected]> wrote:
>
> In perf annotate, when 's' is pressed on a line containing
> source code, it shows the message "Only available for assembly
> lines".
> This patch gets rid of the error, moving the cursr to the next
> available asm line (or the closest previous one if no asm line
> is found moving forwards), before hiding source code lines.
>
> Changes in v2:
> - handle case of no asm line found in
> annotate_browser__find_next_asm_line by returning NULL and
> handling error in caller.
>
> Signed-off-by: Riccardo Mancini <[email protected]>

Acked-by: Ian Rogers <[email protected]>

> ---
> tools/perf/ui/browsers/annotate.c | 32 ++++++++++++++++++++++++++++---
> 1 file changed, 29 insertions(+), 3 deletions(-)
>
> diff --git a/tools/perf/ui/browsers/annotate.c b/tools/perf/ui/browsers/annotate.c
> index ad0a70f0edaf..f5509a958e38 100644
> --- a/tools/perf/ui/browsers/annotate.c
> +++ b/tools/perf/ui/browsers/annotate.c
> @@ -343,6 +343,29 @@ static void annotate_browser__calc_percent(struct annotate_browser *browser,
> browser->curr_hot = rb_last(&browser->entries);
> }
>
> +static struct annotation_line *annotate_browser__find_next_asm_line(
> + struct annotate_browser *browser,
> + struct annotation_line *al)
> +{
> + struct annotation_line *it = al;
> +
> + /* find next asm line */
> + list_for_each_entry_continue(it, browser->b.top, node) {
> + if (it->idx_asm >= 0)
> + return it;
> + }
> +
> + /* no asm line found forwards, try backwards */
> + it = al;
> + list_for_each_entry_continue_reverse(it, browser->b.top, node) {
> + if (it->idx_asm >= 0)
> + return it;
> + }
> +
> + /* There are no asm lines */
> + return NULL;
> +}
> +
> static bool annotate_browser__toggle_source(struct annotate_browser *browser)
> {
> struct annotation *notes = browser__annotation(&browser->b);
> @@ -363,9 +386,12 @@ static bool annotate_browser__toggle_source(struct annotate_browser *browser)
> browser->b.index = al->idx;
> } else {
> if (al->idx_asm < 0) {
> - ui_helpline__puts("Only available for assembly lines.");
> - browser->b.seek(&browser->b, -offset, SEEK_CUR);
> - return false;
> + /* move cursor to next asm line */

comment nit, perhaps prefer "closest" rather than "next" due to
searching backward.

Thanks,
Ian

> + al = annotate_browser__find_next_asm_line(browser, al);
> + if (!al) {
> + browser->b.seek(&browser->b, -offset, SEEK_CUR);
> + return false;
> + }
> }
>
> if (al->idx_asm < offset)
> --
> 2.31.1
>

2021-06-25 15:55:11

by Riccardo Mancini

[permalink] [raw]
Subject: Re: [PATCH v2] perf annotate: allow 's' on source code lines

Hi Ian,

On Thu, 2021-06-24 at 22:37 -0700, Ian Rogers wrote:
> On Thu, Jun 24, 2021 at 3:37 PM Riccardo Mancini <[email protected]> wrote:
> >
> > In perf annotate, when 's' is pressed on a line containing
> > source code, it shows the message "Only available for assembly
> > lines".
> > This patch gets rid of the error, moving the cursr to the next
> > available asm line (or the closest previous one if no asm line
> > is found moving forwards), before hiding source code lines.
> >
> > Changes in v2:
> >  - handle case of no asm line found in
> >    annotate_browser__find_next_asm_line by returning NULL and
> >    handling error in caller.
> >
> > Signed-off-by: Riccardo Mancini <[email protected]>
>
> Acked-by: Ian Rogers <[email protected]>
>
> > ---
> >  tools/perf/ui/browsers/annotate.c | 32 ++++++++++++++++++++++++++++---
> >  1 file changed, 29 insertions(+), 3 deletions(-)
> >
> > diff --git a/tools/perf/ui/browsers/annotate.c
> > b/tools/perf/ui/browsers/annotate.c
> > index ad0a70f0edaf..f5509a958e38 100644
> > --- a/tools/perf/ui/browsers/annotate.c
> > +++ b/tools/perf/ui/browsers/annotate.c
> > @@ -343,6 +343,29 @@ static void annotate_browser__calc_percent(struct
> > annotate_browser *browser,
> >         browser->curr_hot = rb_last(&browser->entries);
> >  }
> >
> > +static struct annotation_line *annotate_browser__find_next_asm_line(
> > +                                       struct annotate_browser *browser,
> > +                                       struct annotation_line *al)
> > +{
> > +       struct annotation_line *it = al;
> > +
> > +       /* find next asm line */
> > +       list_for_each_entry_continue(it, browser->b.top, node) {
> > +               if (it->idx_asm >= 0)
> > +                       return it;
> > +       }
> > +
> > +       /* no asm line found forwards, try backwards */
> > +       it = al;
> > +       list_for_each_entry_continue_reverse(it, browser->b.top, node) {
> > +               if (it->idx_asm >= 0)
> > +                       return it;
> > +       }
> > +
> > +       /* There are no asm lines */
> > +       return NULL;
> > +}
> > +
> >  static bool annotate_browser__toggle_source(struct annotate_browser
> > *browser)
> >  {
> >         struct annotation *notes = browser__annotation(&browser->b);
> > @@ -363,9 +386,12 @@ static bool annotate_browser__toggle_source(struct
> > annotate_browser *browser)
> >                 browser->b.index = al->idx;
> >         } else {
> >                 if (al->idx_asm < 0) {
> > -                       ui_helpline__puts("Only available for assembly
> > lines.");
> > -                       browser->b.seek(&browser->b, -offset, SEEK_CUR);
> > -                       return false;
> > +                       /* move cursor to next asm line */
>
> comment nit, perhaps prefer "closest" rather than "next" due to
> searching backward.

The backward search is just a fallback in case the forward one finds no asm
line, which I believe is unlikely. Maybe it's also impossible, but I don't
really know how those lines are generated, so I put a fallback in place.
Furthermore, "closest" would imply that a previous asm line could be chosen over
a subsequent one if closer, even if the latter is present.

Thanks,
Riccardo

>
> Thanks,
> Ian
>
> > +                       al = annotate_browser__find_next_asm_line(browser,
> > al);
> > +                       if (!al) {
> > +                               browser->b.seek(&browser->b, -offset,
> > SEEK_CUR);
> > +                               return false;
> > +                       }
> >                 }
> >
> >                 if (al->idx_asm < offset)
> > --
> > 2.31.1
> >


2021-06-29 15:02:29

by Ian Rogers

[permalink] [raw]
Subject: Re: [PATCH v2] perf annotate: allow 's' on source code lines

On Fri, Jun 25, 2021 at 8:53 AM Riccardo Mancini <[email protected]> wrote:
>
> Hi Ian,
>
> On Thu, 2021-06-24 at 22:37 -0700, Ian Rogers wrote:
> > On Thu, Jun 24, 2021 at 3:37 PM Riccardo Mancini <[email protected]> wrote:
> > >
> > > In perf annotate, when 's' is pressed on a line containing
> > > source code, it shows the message "Only available for assembly
> > > lines".
> > > This patch gets rid of the error, moving the cursr to the next
> > > available asm line (or the closest previous one if no asm line
> > > is found moving forwards), before hiding source code lines.
> > >
> > > Changes in v2:
> > > - handle case of no asm line found in
> > > annotate_browser__find_next_asm_line by returning NULL and
> > > handling error in caller.
> > >
> > > Signed-off-by: Riccardo Mancini <[email protected]>
> >
> > Acked-by: Ian Rogers <[email protected]>
> >
> > > ---
> > > tools/perf/ui/browsers/annotate.c | 32 ++++++++++++++++++++++++++++---
> > > 1 file changed, 29 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/tools/perf/ui/browsers/annotate.c
> > > b/tools/perf/ui/browsers/annotate.c
> > > index ad0a70f0edaf..f5509a958e38 100644
> > > --- a/tools/perf/ui/browsers/annotate.c
> > > +++ b/tools/perf/ui/browsers/annotate.c
> > > @@ -343,6 +343,29 @@ static void annotate_browser__calc_percent(struct
> > > annotate_browser *browser,
> > > browser->curr_hot = rb_last(&browser->entries);
> > > }
> > >
> > > +static struct annotation_line *annotate_browser__find_next_asm_line(
> > > + struct annotate_browser *browser,
> > > + struct annotation_line *al)
> > > +{
> > > + struct annotation_line *it = al;
> > > +
> > > + /* find next asm line */
> > > + list_for_each_entry_continue(it, browser->b.top, node) {
> > > + if (it->idx_asm >= 0)
> > > + return it;
> > > + }
> > > +
> > > + /* no asm line found forwards, try backwards */
> > > + it = al;
> > > + list_for_each_entry_continue_reverse(it, browser->b.top, node) {
> > > + if (it->idx_asm >= 0)
> > > + return it;
> > > + }
> > > +
> > > + /* There are no asm lines */
> > > + return NULL;
> > > +}
> > > +
> > > static bool annotate_browser__toggle_source(struct annotate_browser
> > > *browser)
> > > {
> > > struct annotation *notes = browser__annotation(&browser->b);
> > > @@ -363,9 +386,12 @@ static bool annotate_browser__toggle_source(struct
> > > annotate_browser *browser)
> > > browser->b.index = al->idx;
> > > } else {
> > > if (al->idx_asm < 0) {
> > > - ui_helpline__puts("Only available for assembly
> > > lines.");
> > > - browser->b.seek(&browser->b, -offset, SEEK_CUR);
> > > - return false;
> > > + /* move cursor to next asm line */
> >
> > comment nit, perhaps prefer "closest" rather than "next" due to
> > searching backward.
>
> The backward search is just a fallback in case the forward one finds no asm
> line, which I believe is unlikely. Maybe it's also impossible, but I don't
> really know how those lines are generated, so I put a fallback in place.
> Furthermore, "closest" would imply that a previous asm line could be chosen over
> a subsequent one if closer, even if the latter is present.
>
> Thanks,
> Riccardo

Agreed, thanks for thinking about this.

Acked-by: Ian Rogers <[email protected]>

> >
> > Thanks,
> > Ian
> >
> > > + al = annotate_browser__find_next_asm_line(browser,
> > > al);
> > > + if (!al) {
> > > + browser->b.seek(&browser->b, -offset,
> > > SEEK_CUR);
> > > + return false;
> > > + }
> > > }
> > >
> > > if (al->idx_asm < offset)
> > > --
> > > 2.31.1
> > >
>
>

2021-07-01 18:04:51

by Arnaldo Carvalho de Melo

[permalink] [raw]
Subject: Re: [PATCH v2] perf annotate: allow 's' on source code lines

Em Tue, Jun 29, 2021 at 08:00:31AM -0700, Ian Rogers escreveu:
> On Fri, Jun 25, 2021 at 8:53 AM Riccardo Mancini <[email protected]> wrote:
> > On Thu, 2021-06-24 at 22:37 -0700, Ian Rogers wrote:
> > > On Thu, Jun 24, 2021 at 3:37 PM Riccardo Mancini <[email protected]> wrote:
> > > comment nit, perhaps prefer "closest" rather than "next" due to
> > > searching backward.
> >
> > The backward search is just a fallback in case the forward one finds no asm
> > line, which I believe is unlikely. Maybe it's also impossible, but I don't
> > really know how those lines are generated, so I put a fallback in place.
> > Furthermore, "closest" would imply that a previous asm line could be chosen over
> > a subsequent one if closer, even if the latter is present.
> >
> > Thanks,
> > Riccardo
>
> Agreed, thanks for thinking about this.
>
> Acked-by: Ian Rogers <[email protected]>

Thanks, applied.

- Arnaldo