From: Liuyuntao (F) <[email protected]>
Date: Thu, 25 Apr 2024 14:37:19 +0800
>
>
> On 2024/4/24 19:06, Alexander Lobakin wrote:
>> From: Yuntao Liu <[email protected]>
>> Date: Mon, 22 Apr 2024 06:05:56 +0000
>>
>>> The current x86 architecture does not yet support the
>>> HAVE_LD_DEAD_CODE_DATA_ELIMINATION feature. x86 is widely used in
>>> embedded scenarios, and enabling this feature would be beneficial for
>>> reducing the size of the kernel image.
>>>
>>> In order to make this work, we keep the necessary tables by annotating
>>> them with KEEP, also it requires further changes to linker script to
>>> KEEP
>>> some tables and wildcard compiler generated sections into the right
>>> place.
>>>
>>> Enabling CONFIG_UNWINDER_ORC or CONFIG_MITIGATION_RETPOLINE will enable
>>> the objtool's --orc and --retpoline parameters, which will alter the
>>> layout of the binary file, thereby preventing gc-sections from
>>> functioning
>>> properly. Therefore, HAVE_LD_DEAD_CODE_DATA_ELIMINATION should only be
>>> selected when they are not enabled.
>>
>> Dunno, I have DCE enabled for years on my home kernel, see commit [0]
>> with both ORC and retpolines enabled, and I didn't have any issues.
>> vmlinux still shrinks well, even with Clang LTO.
>>
>>>
>>> Enabling CONFIG_LTO_CLANG or CONFIG_X86_KERNEL_IBT will use vmlinux.o
>>> instead of performing the slow LTO link again. This can also prevent
>>> gc-sections from functioning properly. Therefore, using this
>>> optimization
>>> when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled.
>>>
>>> The size comparison of zImage is as follows:
>>> x86_def_defconfig i386_defconfig tinyconfig
>>> 10892288 10826240 607232 no dce
>>> 10748928 10719744 529408 dce
>>> 1.3% 0.98% 12.8% shrink
>>>
>>> When using smaller config file, there is a significant reduction in the
>>> size of the zImage.
>>
>> [0] https://github.com/solbjorn/linux/commit/25c4953ea73d
>>
>> Thanks,
>> Olek
>
> I apply your patch, and use LLVM toolchain to compile the kernel, it not
> boot on QEMU.
> I use the following command.
>> qemu-system-x86_64 -smp 2 -m 1024M -nographic -kernel
>> mainline_linux/arch/x86/boot/bzImage -hda rootfs.img -append
>> "root=/dev/sda console=ttyS0 rootfstype=ext4 init=/linuxrc rw"
> Have you tested your patch on the latest mainline version?
Nope, it was a year ago and I haven't touched it since then. Did the
low-level code change a lot?
> Thanks.
> Yuntao.
Thanks,
Olek