2020-05-20 06:03:16

by Peng Fan

[permalink] [raw]
Subject: [PATCH V3 0/3] ARM: imx: move cpu code to drivers/soc/imx

From: Peng Fan <[email protected]>

V3:
Rebased to latest next tree
Resolved the conflicts with vf610 soc patch

V2:
Keep i.MX1/2/3/5 cpu type for completness
Correct return value in patch 1/3
use CONFIG_ARM to guard compile soc-imx.c in patch 3/3

V1:
https://patchwork.kernel.org/cover/11433689/
RFC version :
https://patchwork.kernel.org/cover/11336433/

Nothing changed in v1, just rename to formal patches

Shawn,
The original concern has been eliminated in RFC discussion,
so this patchset is ready to be in next.
Thanks.

Follow i.MX8, move the soc device register code to drivers/soc/imx
to simplify arch/arm/mach-imx/cpu.c

I planned to use similar logic as soc-imx8m.c to restructure soc-imx.c
and merged the two files into one. But not sure, so still keep
the logic in cpu.c.

There is one change is the platform devices are not under
/sys/devices/soc0 after patch 1/4. Actually ARM64 platform
devices are not under /sys/devices/soc0, such as i.MX8/8M.
So it should not hurt to let the platform devices under platform dir.

Peng Fan (3):
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: move cpu definitions into a header
soc: imx: move cpu code to drivers/soc/imx

arch/arm/mach-imx/common.h | 1 -
arch/arm/mach-imx/cpu.c | 175 -----------------------------------
arch/arm/mach-imx/mach-imx6q.c | 8 +-
arch/arm/mach-imx/mach-imx6sl.c | 8 +-
arch/arm/mach-imx/mach-imx6sx.c | 8 +-
arch/arm/mach-imx/mach-imx6ul.c | 8 +-
arch/arm/mach-imx/mach-imx7d.c | 6 --
arch/arm/mach-imx/mach-imx7ulp.c | 2 +-
arch/arm/mach-imx/mach-vf610.c | 8 +-
arch/arm/mach-imx/mxc.h | 28 +-----
drivers/soc/imx/Makefile | 3 +
drivers/soc/imx/soc-imx.c | 192 +++++++++++++++++++++++++++++++++++++++
include/soc/imx/cpu.h | 36 ++++++++
13 files changed, 238 insertions(+), 245 deletions(-)
create mode 100644 drivers/soc/imx/soc-imx.c
create mode 100644 include/soc/imx/cpu.h

--
2.16.4


2020-05-20 06:03:38

by Peng Fan

[permalink] [raw]
Subject: [PATCH V3 1/3] ARM: imx: use device_initcall for imx_soc_device_init

From: Peng Fan <[email protected]>

This is preparation to move imx_soc_device_init to drivers/soc/imx/

There is no reason to must put dt devices under /sys/devices/soc0,
they could also be under /sys/devices/platform, so we could
pass NULL as parent when calling of_platform_default_populate.

Following soc-imx8.c soc-imx-scu.c using device_initcall, need
to change return type to int type for imx_soc_device_init.

Signed-off-by: Peng Fan <[email protected]>
---
arch/arm/mach-imx/common.h | 1 -
arch/arm/mach-imx/cpu.c | 21 ++++++++++++++-------
arch/arm/mach-imx/mach-imx6q.c | 8 +-------
arch/arm/mach-imx/mach-imx6sl.c | 8 +-------
arch/arm/mach-imx/mach-imx6sx.c | 8 +-------
arch/arm/mach-imx/mach-imx6ul.c | 8 +-------
arch/arm/mach-imx/mach-imx7d.c | 6 ------
arch/arm/mach-imx/mach-imx7ulp.c | 2 +-
arch/arm/mach-imx/mach-vf610.c | 8 +-------
9 files changed, 20 insertions(+), 50 deletions(-)

diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 5aa5796cff0e..72c3fcc32910 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -49,7 +49,6 @@ void imx_aips_allow_unprivileged_access(const char *compat);
int mxc_device_init(void);
void imx_set_soc_revision(unsigned int rev);
void imx_init_revision_from_anatop(void);
-struct device *imx_soc_device_init(void);
void imx6_enable_rbc(bool enable);
void imx_gpc_check_dt(void);
void imx_gpc_set_arm_power_in_lpm(bool power_off);
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index e3d12b21d6f6..75ffcba9f878 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -83,7 +83,7 @@ void __init imx_aips_allow_unprivileged_access(
}
}

-struct device * __init imx_soc_device_init(void)
+static int __init imx_soc_device_init(void)
{
struct soc_device_attribute *soc_dev_attr;
const char *ocotp_compat = NULL;
@@ -97,7 +97,7 @@ struct device * __init imx_soc_device_init(void)

soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
- return NULL;
+ return -ENOMEM;

soc_dev_attr->family = "Freescale i.MX";

@@ -224,18 +224,24 @@ struct device * __init imx_soc_device_init(void)
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
(imx_soc_revision >> 4) & 0xf,
imx_soc_revision & 0xf);
- if (!soc_dev_attr->revision)
+ if (!soc_dev_attr->revision) {
+ ret = -ENOMEM;
goto free_soc;
+ }

soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid);
- if (!soc_dev_attr->serial_number)
+ if (!soc_dev_attr->serial_number) {
+ ret = -ENOMEM;
goto free_rev;
+ }

soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev))
+ if (IS_ERR(soc_dev)) {
+ ret = PTR_ERR(soc_dev);
goto free_serial_number;
+ }

- return soc_device_to_device(soc_dev);
+ return 0;

free_serial_number:
kfree(soc_dev_attr->serial_number);
@@ -243,5 +249,6 @@ struct device * __init imx_soc_device_init(void)
kfree(soc_dev_attr->revision);
free_soc:
kfree(soc_dev_attr);
- return NULL;
+ return ret;
}
+device_initcall(imx_soc_device_init);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 284bce1112d2..85c084a716ab 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -245,21 +245,15 @@ static void __init imx6q_axi_init(void)

static void __init imx6q_init_machine(void)
{
- struct device *parent;
-
if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0);
else
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
imx_get_soc_revision());

- parent = imx_soc_device_init();
- if (parent == NULL)
- pr_warn("failed to initialize soc device\n");
-
imx6q_enet_phy_init();

- of_platform_default_populate(NULL, NULL, parent);
+ of_platform_default_populate(NULL, NULL, NULL);

imx_anatop_init();
cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init();
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index e27a6889cc56..f6e87363d605 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -45,13 +45,7 @@ static void __init imx6sl_init_late(void)

static void __init imx6sl_init_machine(void)
{
- struct device *parent;
-
- parent = imx_soc_device_init();
- if (parent == NULL)
- pr_warn("failed to initialize soc device\n");
-
- of_platform_default_populate(NULL, NULL, parent);
+ of_platform_default_populate(NULL, NULL, NULL);

if (cpu_is_imx6sl())
imx6sl_fec_init();
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index d5310bf307ff..781e2a94fdd7 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -63,13 +63,7 @@ static inline void imx6sx_enet_init(void)

static void __init imx6sx_init_machine(void)
{
- struct device *parent;
-
- parent = imx_soc_device_init();
- if (parent == NULL)
- pr_warn("failed to initialize soc device\n");
-
- of_platform_default_populate(NULL, NULL, parent);
+ of_platform_default_populate(NULL, NULL, NULL);

imx6sx_enet_init();
imx_anatop_init();
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 3b0e16ccd59d..e018e716735f 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -55,13 +55,7 @@ static inline void imx6ul_enet_init(void)

static void __init imx6ul_init_machine(void)
{
- struct device *parent;
-
- parent = imx_soc_device_init();
- if (parent == NULL)
- pr_warn("failed to initialize soc device\n");
-
- of_platform_default_populate(NULL, NULL, parent);
+ of_platform_default_populate(NULL, NULL, NULL);
imx6ul_enet_init();
imx_anatop_init();
imx6ul_pm_init();
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index ebb27592a9f7..879c35929a13 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -78,12 +78,6 @@ static inline void imx7d_enet_init(void)

static void __init imx7d_init_machine(void)
{
- struct device *parent;
-
- parent = imx_soc_device_init();
- if (parent == NULL)
- pr_warn("failed to initialize soc device\n");
-
imx_anatop_init();
imx7d_enet_init();
}
diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c
index 11ac71aaf965..128cf4c92aab 100644
--- a/arch/arm/mach-imx/mach-imx7ulp.c
+++ b/arch/arm/mach-imx/mach-imx7ulp.c
@@ -57,7 +57,7 @@ static void __init imx7ulp_init_machine(void)

mxc_set_cpu_type(MXC_CPU_IMX7ULP);
imx7ulp_set_revision();
- of_platform_default_populate(NULL, NULL, imx_soc_device_init());
+ of_platform_default_populate(NULL, NULL, NULL);
}

static const char *const imx7ulp_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index 565dc08412a2..208ff640698d 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -49,15 +49,9 @@ static void __init vf610_detect_cpu(void)

static void __init vf610_init_machine(void)
{
- struct device *parent;
-
vf610_detect_cpu();

- parent = imx_soc_device_init();
- if (parent == NULL)
- pr_warn("failed to initialize soc device\n");
-
- of_platform_default_populate(NULL, NULL, parent);
+ of_platform_default_populate(NULL, NULL, NULL);
}

static const char * const vf610_dt_compat[] __initconst = {
--
2.16.4

2020-05-20 06:03:45

by Peng Fan

[permalink] [raw]
Subject: [PATCH V3 2/3] ARM: imx: move cpu definitions into a header

From: Peng Fan <[email protected]>

The soc device register code will be moved to drivers/soc/imx/,
the code needs the cpu type definitions. So let's move the cpu
type definitions to a header.

Signed-off-by: Peng Fan <[email protected]>
---
arch/arm/mach-imx/mxc.h | 28 +---------------------------
include/soc/imx/cpu.h | 36 ++++++++++++++++++++++++++++++++++++
2 files changed, 37 insertions(+), 27 deletions(-)
create mode 100644 include/soc/imx/cpu.h

diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 48e6d781f15b..fe2d0f5abfcc 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -8,41 +8,15 @@
#define __ASM_ARCH_MXC_H__

#include <linux/types.h>
+#include <soc/imx/cpu.h>

#ifndef __ASM_ARCH_MXC_HARDWARE_H__
#error "Do not include directly."
#endif

-#define MXC_CPU_MX1 1
-#define MXC_CPU_MX21 21
-#define MXC_CPU_MX25 25
-#define MXC_CPU_MX27 27
-#define MXC_CPU_MX31 31
-#define MXC_CPU_MX35 35
-#define MXC_CPU_MX51 51
-#define MXC_CPU_MX53 53
-#define MXC_CPU_IMX6SL 0x60
-#define MXC_CPU_IMX6DL 0x61
-#define MXC_CPU_IMX6SX 0x62
-#define MXC_CPU_IMX6Q 0x63
-#define MXC_CPU_IMX6UL 0x64
-#define MXC_CPU_IMX6ULL 0x65
-/* virtual cpu id for i.mx6ulz */
-#define MXC_CPU_IMX6ULZ 0x6b
-#define MXC_CPU_IMX6SLL 0x67
-#define MXC_CPU_IMX7D 0x72
-#define MXC_CPU_IMX7ULP 0xff
-
-#define MXC_CPU_VFx10 0x010
-#define MXC_CPU_VF500 0x500
-#define MXC_CPU_VF510 (MXC_CPU_VF500 | MXC_CPU_VFx10)
-#define MXC_CPU_VF600 0x600
-#define MXC_CPU_VF610 (MXC_CPU_VF600 | MXC_CPU_VFx10)
-
#define IMX_DDR_TYPE_LPDDR2 1

#ifndef __ASSEMBLY__
-extern unsigned int __mxc_cpu_type;

#ifdef CONFIG_SOC_IMX6SL
static inline bool cpu_is_imx6sl(void)
diff --git a/include/soc/imx/cpu.h b/include/soc/imx/cpu.h
new file mode 100644
index 000000000000..42d6aeb951fa
--- /dev/null
+++ b/include/soc/imx/cpu.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef __IMX_CPU_H__
+#define __IMX_CPU_H__
+
+#define MXC_CPU_MX1 1
+#define MXC_CPU_MX21 21
+#define MXC_CPU_MX25 25
+#define MXC_CPU_MX27 27
+#define MXC_CPU_MX31 31
+#define MXC_CPU_MX35 35
+#define MXC_CPU_MX51 51
+#define MXC_CPU_MX53 53
+#define MXC_CPU_IMX6SL 0x60
+#define MXC_CPU_IMX6DL 0x61
+#define MXC_CPU_IMX6SX 0x62
+#define MXC_CPU_IMX6Q 0x63
+#define MXC_CPU_IMX6UL 0x64
+#define MXC_CPU_IMX6ULL 0x65
+/* virtual cpu id for i.mx6ulz */
+#define MXC_CPU_IMX6ULZ 0x6b
+#define MXC_CPU_IMX6SLL 0x67
+#define MXC_CPU_IMX7D 0x72
+#define MXC_CPU_IMX7ULP 0xff
+
+#define MXC_CPU_VFx10 0x010
+#define MXC_CPU_VF500 0x500
+#define MXC_CPU_VF510 (MXC_CPU_VF500 | MXC_CPU_VFx10)
+#define MXC_CPU_VF600 0x600
+#define MXC_CPU_VF610 (MXC_CPU_VF600 | MXC_CPU_VFx10)
+
+#ifndef __ASSEMBLY__
+extern unsigned int __mxc_cpu_type;
+#endif
+
+#endif
--
2.16.4

2020-05-20 06:04:01

by Peng Fan

[permalink] [raw]
Subject: [PATCH V3 3/3] soc: imx: move cpu code to drivers/soc/imx

From: Peng Fan <[email protected]>

Move the soc device register code to drivers/soc/imx to align with
i.MX8.

Signed-off-by: Peng Fan <[email protected]>
---
arch/arm/mach-imx/cpu.c | 182 -------------------------------------------
drivers/soc/imx/Makefile | 3 +
drivers/soc/imx/soc-imx.c | 192 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 195 insertions(+), 182 deletions(-)
create mode 100644 drivers/soc/imx/soc-imx.c

diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index 75ffcba9f878..65c7224f5250 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -1,25 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/err.h>
-#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include <linux/sys_soc.h>

#include "hardware.h"
#include "common.h"

-#define OCOTP_UID_H 0x420
-#define OCOTP_UID_L 0x410
-
-#define OCOTP_ULP_UID_1 0x4b0
-#define OCOTP_ULP_UID_2 0x4c0
-#define OCOTP_ULP_UID_3 0x4d0
-#define OCOTP_ULP_UID_4 0x4e0
-
unsigned int __mxc_cpu_type;
static unsigned int imx_soc_revision;

@@ -82,173 +70,3 @@ void __init imx_aips_allow_unprivileged_access(
imx_set_aips(aips_base_addr);
}
}
-
-static int __init imx_soc_device_init(void)
-{
- struct soc_device_attribute *soc_dev_attr;
- const char *ocotp_compat = NULL;
- struct soc_device *soc_dev;
- struct device_node *root;
- struct regmap *ocotp = NULL;
- const char *soc_id;
- u64 soc_uid = 0;
- u32 val;
- int ret;
-
- soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
- if (!soc_dev_attr)
- return -ENOMEM;
-
- soc_dev_attr->family = "Freescale i.MX";
-
- root = of_find_node_by_path("/");
- ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
- of_node_put(root);
- if (ret)
- goto free_soc;
-
- switch (__mxc_cpu_type) {
- case MXC_CPU_MX1:
- soc_id = "i.MX1";
- break;
- case MXC_CPU_MX21:
- soc_id = "i.MX21";
- break;
- case MXC_CPU_MX25:
- soc_id = "i.MX25";
- break;
- case MXC_CPU_MX27:
- soc_id = "i.MX27";
- break;
- case MXC_CPU_MX31:
- soc_id = "i.MX31";
- break;
- case MXC_CPU_MX35:
- soc_id = "i.MX35";
- break;
- case MXC_CPU_MX51:
- soc_id = "i.MX51";
- break;
- case MXC_CPU_MX53:
- soc_id = "i.MX53";
- break;
- case MXC_CPU_IMX6SL:
- ocotp_compat = "fsl,imx6sl-ocotp";
- soc_id = "i.MX6SL";
- break;
- case MXC_CPU_IMX6DL:
- ocotp_compat = "fsl,imx6q-ocotp";
- soc_id = "i.MX6DL";
- break;
- case MXC_CPU_IMX6SX:
- ocotp_compat = "fsl,imx6sx-ocotp";
- soc_id = "i.MX6SX";
- break;
- case MXC_CPU_IMX6Q:
- ocotp_compat = "fsl,imx6q-ocotp";
- soc_id = "i.MX6Q";
- break;
- case MXC_CPU_IMX6UL:
- ocotp_compat = "fsl,imx6ul-ocotp";
- soc_id = "i.MX6UL";
- break;
- case MXC_CPU_IMX6ULL:
- ocotp_compat = "fsl,imx6ull-ocotp";
- soc_id = "i.MX6ULL";
- break;
- case MXC_CPU_IMX6ULZ:
- ocotp_compat = "fsl,imx6ull-ocotp";
- soc_id = "i.MX6ULZ";
- break;
- case MXC_CPU_IMX6SLL:
- ocotp_compat = "fsl,imx6sll-ocotp";
- soc_id = "i.MX6SLL";
- break;
- case MXC_CPU_IMX7D:
- ocotp_compat = "fsl,imx7d-ocotp";
- soc_id = "i.MX7D";
- break;
- case MXC_CPU_IMX7ULP:
- ocotp_compat = "fsl,imx7ulp-ocotp";
- soc_id = "i.MX7ULP";
- break;
- case MXC_CPU_VF500:
- ocotp_compat = "fsl,vf610-ocotp";
- soc_id = "VF500";
- break;
- case MXC_CPU_VF510:
- ocotp_compat = "fsl,vf610-ocotp";
- soc_id = "VF510";
- break;
- case MXC_CPU_VF600:
- ocotp_compat = "fsl,vf610-ocotp";
- soc_id = "VF600";
- break;
- case MXC_CPU_VF610:
- ocotp_compat = "fsl,vf610-ocotp";
- soc_id = "VF610";
- break;
- default:
- soc_id = "Unknown";
- }
- soc_dev_attr->soc_id = soc_id;
-
- if (ocotp_compat) {
- ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat);
- if (IS_ERR(ocotp))
- pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat);
- }
-
- if (!IS_ERR_OR_NULL(ocotp)) {
- if (__mxc_cpu_type == MXC_CPU_IMX7ULP) {
- regmap_read(ocotp, OCOTP_ULP_UID_4, &val);
- soc_uid = val & 0xffff;
- regmap_read(ocotp, OCOTP_ULP_UID_3, &val);
- soc_uid <<= 16;
- soc_uid |= val & 0xffff;
- regmap_read(ocotp, OCOTP_ULP_UID_2, &val);
- soc_uid <<= 16;
- soc_uid |= val & 0xffff;
- regmap_read(ocotp, OCOTP_ULP_UID_1, &val);
- soc_uid <<= 16;
- soc_uid |= val & 0xffff;
- } else {
- regmap_read(ocotp, OCOTP_UID_H, &val);
- soc_uid = val;
- regmap_read(ocotp, OCOTP_UID_L, &val);
- soc_uid <<= 32;
- soc_uid |= val;
- }
- }
-
- soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
- (imx_soc_revision >> 4) & 0xf,
- imx_soc_revision & 0xf);
- if (!soc_dev_attr->revision) {
- ret = -ENOMEM;
- goto free_soc;
- }
-
- soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid);
- if (!soc_dev_attr->serial_number) {
- ret = -ENOMEM;
- goto free_rev;
- }
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev)) {
- ret = PTR_ERR(soc_dev);
- goto free_serial_number;
- }
-
- return 0;
-
-free_serial_number:
- kfree(soc_dev_attr->serial_number);
-free_rev:
- kfree(soc_dev_attr->revision);
-free_soc:
- kfree(soc_dev_attr);
- return ret;
-}
-device_initcall(imx_soc_device_init);
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index 103e2c93c342..446143241fe7 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -1,4 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
+ifeq ($(CONFIG_ARM),y)
+obj-$(CONFIG_ARCH_MXC) += soc-imx.o
+endif
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
diff --git a/drivers/soc/imx/soc-imx.c b/drivers/soc/imx/soc-imx.c
new file mode 100644
index 000000000000..fec3d672b606
--- /dev/null
+++ b/drivers/soc/imx/soc-imx.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 NXP
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#include <soc/imx/cpu.h>
+#include <soc/imx/revision.h>
+
+#define OCOTP_UID_H 0x420
+#define OCOTP_UID_L 0x410
+
+#define OCOTP_ULP_UID_1 0x4b0
+#define OCOTP_ULP_UID_2 0x4c0
+#define OCOTP_ULP_UID_3 0x4d0
+#define OCOTP_ULP_UID_4 0x4e0
+
+static int __init imx_soc_device_init(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ const char *ocotp_compat = NULL;
+ struct soc_device *soc_dev;
+ struct device_node *root;
+ struct regmap *ocotp = NULL;
+ const char *soc_id;
+ u64 soc_uid = 0;
+ u32 val;
+ int ret;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Freescale i.MX";
+
+ root = of_find_node_by_path("/");
+ ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
+ of_node_put(root);
+ if (ret)
+ goto free_soc;
+
+ switch (__mxc_cpu_type) {
+ case MXC_CPU_MX1:
+ soc_id = "i.MX1";
+ break;
+ case MXC_CPU_MX21:
+ soc_id = "i.MX21";
+ break;
+ case MXC_CPU_MX25:
+ soc_id = "i.MX25";
+ break;
+ case MXC_CPU_MX27:
+ soc_id = "i.MX27";
+ break;
+ case MXC_CPU_MX31:
+ soc_id = "i.MX31";
+ break;
+ case MXC_CPU_MX35:
+ soc_id = "i.MX35";
+ break;
+ case MXC_CPU_MX51:
+ soc_id = "i.MX51";
+ break;
+ case MXC_CPU_MX53:
+ soc_id = "i.MX53";
+ break;
+ case MXC_CPU_IMX6SL:
+ ocotp_compat = "fsl,imx6sl-ocotp";
+ soc_id = "i.MX6SL";
+ break;
+ case MXC_CPU_IMX6DL:
+ ocotp_compat = "fsl,imx6q-ocotp";
+ soc_id = "i.MX6DL";
+ break;
+ case MXC_CPU_IMX6SX:
+ ocotp_compat = "fsl,imx6sx-ocotp";
+ soc_id = "i.MX6SX";
+ break;
+ case MXC_CPU_IMX6Q:
+ ocotp_compat = "fsl,imx6q-ocotp";
+ soc_id = "i.MX6Q";
+ break;
+ case MXC_CPU_IMX6UL:
+ ocotp_compat = "fsl,imx6ul-ocotp";
+ soc_id = "i.MX6UL";
+ break;
+ case MXC_CPU_IMX6ULL:
+ ocotp_compat = "fsl,imx6ull-ocotp";
+ soc_id = "i.MX6ULL";
+ break;
+ case MXC_CPU_IMX6ULZ:
+ ocotp_compat = "fsl,imx6ull-ocotp";
+ soc_id = "i.MX6ULZ";
+ break;
+ case MXC_CPU_IMX6SLL:
+ ocotp_compat = "fsl,imx6sll-ocotp";
+ soc_id = "i.MX6SLL";
+ break;
+ case MXC_CPU_IMX7D:
+ ocotp_compat = "fsl,imx7d-ocotp";
+ soc_id = "i.MX7D";
+ break;
+ case MXC_CPU_IMX7ULP:
+ ocotp_compat = "fsl,imx7ulp-ocotp";
+ soc_id = "i.MX7ULP";
+ break;
+ case MXC_CPU_VF500:
+ ocotp_compat = "fsl,vf610-ocotp";
+ soc_id = "VF500";
+ break;
+ case MXC_CPU_VF510:
+ ocotp_compat = "fsl,vf610-ocotp";
+ soc_id = "VF510";
+ break;
+ case MXC_CPU_VF600:
+ ocotp_compat = "fsl,vf610-ocotp";
+ soc_id = "VF600";
+ break;
+ case MXC_CPU_VF610:
+ ocotp_compat = "fsl,vf610-ocotp";
+ soc_id = "VF610";
+ break;
+ default:
+ soc_id = "Unknown";
+ }
+ soc_dev_attr->soc_id = soc_id;
+
+ if (ocotp_compat) {
+ ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat);
+ if (IS_ERR(ocotp))
+ pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat);
+ }
+
+ if (!IS_ERR_OR_NULL(ocotp)) {
+ if (__mxc_cpu_type == MXC_CPU_IMX7ULP) {
+ regmap_read(ocotp, OCOTP_ULP_UID_4, &val);
+ soc_uid = val & 0xffff;
+ regmap_read(ocotp, OCOTP_ULP_UID_3, &val);
+ soc_uid <<= 16;
+ soc_uid |= val & 0xffff;
+ regmap_read(ocotp, OCOTP_ULP_UID_2, &val);
+ soc_uid <<= 16;
+ soc_uid |= val & 0xffff;
+ regmap_read(ocotp, OCOTP_ULP_UID_1, &val);
+ soc_uid <<= 16;
+ soc_uid |= val & 0xffff;
+ } else {
+ regmap_read(ocotp, OCOTP_UID_H, &val);
+ soc_uid = val;
+ regmap_read(ocotp, OCOTP_UID_L, &val);
+ soc_uid <<= 32;
+ soc_uid |= val;
+ }
+ }
+
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
+ (imx_get_soc_revision() >> 4) & 0xf,
+ imx_get_soc_revision() & 0xf);
+ if (!soc_dev_attr->revision) {
+ ret = -ENOMEM;
+ goto free_soc;
+ }
+
+ soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid);
+ if (!soc_dev_attr->serial_number) {
+ ret = -ENOMEM;
+ goto free_rev;
+ }
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ ret = PTR_ERR(soc_dev);
+ goto free_serial_number;
+ }
+
+ return 0;
+
+free_serial_number:
+ kfree(soc_dev_attr->serial_number);
+free_rev:
+ kfree(soc_dev_attr->revision);
+free_soc:
+ kfree(soc_dev_attr);
+ return ret;
+}
+device_initcall(imx_soc_device_init);
--
2.16.4

2020-05-20 15:13:12

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH V3 0/3] ARM: imx: move cpu code to drivers/soc/imx

On Wed, May 20, 2020 at 01:51:26PM +0800, [email protected] wrote:
> From: Peng Fan <[email protected]>
>
> V3:
> Rebased to latest next tree
> Resolved the conflicts with vf610 soc patch
>
> V2:
> Keep i.MX1/2/3/5 cpu type for completness
> Correct return value in patch 1/3
> use CONFIG_ARM to guard compile soc-imx.c in patch 3/3
>
> V1:
> https://patchwork.kernel.org/cover/11433689/
> RFC version :
> https://patchwork.kernel.org/cover/11336433/
>
> Nothing changed in v1, just rename to formal patches
>
> Shawn,
> The original concern has been eliminated in RFC discussion,
> so this patchset is ready to be in next.
> Thanks.
>
> Follow i.MX8, move the soc device register code to drivers/soc/imx
> to simplify arch/arm/mach-imx/cpu.c
>
> I planned to use similar logic as soc-imx8m.c to restructure soc-imx.c
> and merged the two files into one. But not sure, so still keep
> the logic in cpu.c.
>
> There is one change is the platform devices are not under
> /sys/devices/soc0 after patch 1/4. Actually ARM64 platform
> devices are not under /sys/devices/soc0, such as i.MX8/8M.
> So it should not hurt to let the platform devices under platform dir.
>
> Peng Fan (3):
> ARM: imx: use device_initcall for imx_soc_device_init
> ARM: imx: move cpu definitions into a header
> soc: imx: move cpu code to drivers/soc/imx

Applied all, thanks.

2020-07-03 08:55:51

by Horia Geanta

[permalink] [raw]
Subject: Re: [PATCH V3 0/3] ARM: imx: move cpu code to drivers/soc/imx

On 5/20/2020 9:01 AM, Peng Fan wrote:
> From: Peng Fan <[email protected]>
>
> V3:
> Rebased to latest next tree
> Resolved the conflicts with vf610 soc patch
>
> V2:
> Keep i.MX1/2/3/5 cpu type for completness
> Correct return value in patch 1/3
> use CONFIG_ARM to guard compile soc-imx.c in patch 3/3
>
> V1:
> https://patchwork.kernel.org/cover/11433689/
> RFC version :
> https://patchwork.kernel.org/cover/11336433/
>
> Nothing changed in v1, just rename to formal patches
>
> Shawn,
> The original concern has been eliminated in RFC discussion,
> so this patchset is ready to be in next.
> Thanks.
>
> Follow i.MX8, move the soc device register code to drivers/soc/imx
> to simplify arch/arm/mach-imx/cpu.c
>
> I planned to use similar logic as soc-imx8m.c to restructure soc-imx.c
> and merged the two files into one. But not sure, so still keep
> the logic in cpu.c.
>
> There is one change is the platform devices are not under
> /sys/devices/soc0 after patch 1/4. Actually ARM64 platform
> devices are not under /sys/devices/soc0, such as i.MX8/8M.
> So it should not hurt to let the platform devices under platform dir.
>
> Peng Fan (3):
> ARM: imx: use device_initcall for imx_soc_device_init
> ARM: imx: move cpu definitions into a header
> soc: imx: move cpu code to drivers/soc/imx
>
This patch series has the side effect of LS1021A platform now reporting
that it's part of "i.MX family".

caam driver relies on the SoC bus / SoC attributes (ID, family) to determine
if it's running on an i.MX SoC or other (Layerscape, QorIQ).

With this patch set, driver fails to probe on LS1021A:
[ 5.998928] caam 1700000.crypto: No clock data provided for i.MX SoC
[ 6.005306] caam: probe of 1700000.crypto failed with error -22

Horia

2020-07-03 12:26:21

by Peng Fan

[permalink] [raw]
Subject: RE: [PATCH V3 0/3] ARM: imx: move cpu code to drivers/soc/imx

> Subject: Re: [PATCH V3 0/3] ARM: imx: move cpu code to drivers/soc/imx
>
> On 5/20/2020 9:01 AM, Peng Fan wrote:
> > From: Peng Fan <[email protected]>
> >
> > V3:
> > Rebased to latest next tree
> > Resolved the conflicts with vf610 soc patch
> >
> > V2:
> > Keep i.MX1/2/3/5 cpu type for completness Correct return value in
> > patch 1/3 use CONFIG_ARM to guard compile soc-imx.c in patch 3/3
> >
> > V1:
> > https://patchwork.kernel.org/cover/11433689/
> > RFC version :
> > https://patchwork.kernel.org/cover/11336433/
> >
> > Nothing changed in v1, just rename to formal patches
> >
> > Shawn,
> > The original concern has been eliminated in RFC discussion, so this
> > patchset is ready to be in next.
> > Thanks.
> >
> > Follow i.MX8, move the soc device register code to drivers/soc/imx to
> > simplify arch/arm/mach-imx/cpu.c
> >
> > I planned to use similar logic as soc-imx8m.c to restructure soc-imx.c
> > and merged the two files into one. But not sure, so still keep the
> > logic in cpu.c.
> >
> > There is one change is the platform devices are not under
> > /sys/devices/soc0 after patch 1/4. Actually ARM64 platform devices are
> > not under /sys/devices/soc0, such as i.MX8/8M.
> > So it should not hurt to let the platform devices under platform dir.
> >
> > Peng Fan (3):
> > ARM: imx: use device_initcall for imx_soc_device_init
> > ARM: imx: move cpu definitions into a header
> > soc: imx: move cpu code to drivers/soc/imx
> >
> This patch series has the side effect of LS1021A platform now reporting that
> it's part of "i.MX family".
>
> caam driver relies on the SoC bus / SoC attributes (ID, family) to determine if
> it's running on an i.MX SoC or other (Layerscape, QorIQ).

Sorry to break LS1021A. But I wonder why i.MX code would affect LS?

Regards,
Peng.

>
> With this patch set, driver fails to probe on LS1021A:
> [ 5.998928] caam 1700000.crypto: No clock data provided for i.MX SoC
> [ 6.005306] caam: probe of 1700000.crypto failed with error -22
>
> Horia

2020-07-05 09:47:51

by Horia Geanta

[permalink] [raw]
Subject: Re: [PATCH V3 0/3] ARM: imx: move cpu code to drivers/soc/imx

On 7/3/2020 3:25 PM, Peng Fan wrote:
> Sorry to break LS1021A. But I wonder why i.MX code would affect LS?
>
imx_soc_device_init() was modified to be called for all SoCs under ARCH_MXC.
multi_v7_defconfig, which is used for LS1021A, selects ARCH_MXC.

Previously imx_soc_device_init() was called only for i.MX (and Vybrid) SoCs.

Horia

2020-10-28 22:21:14

by Peng Fan

[permalink] [raw]
Subject: RE: [PATCH V3 1/3] ARM: imx: use device_initcall for imx_soc_device_init

Hi Rob,

> Subject: Re: [PATCH V3 1/3] ARM: imx: use device_initcall for
> imx_soc_device_init
>
> On Wed, May 20, 2020 at 1:01 AM <[email protected]> wrote:
> >
> > From: Peng Fan <[email protected]>
> >
> > This is preparation to move imx_soc_device_init to drivers/soc/imx/
> >
> > There is no reason to must put dt devices under /sys/devices/soc0,
> > they could also be under /sys/devices/platform, so we could pass NULL
> > as parent when calling of_platform_default_populate.
> >
> > Following soc-imx8.c soc-imx-scu.c using device_initcall, need to
> > change return type to int type for imx_soc_device_init.
> >
> > Signed-off-by: Peng Fan <[email protected]>
> > ---
>
> > diff --git a/arch/arm/mach-imx/mach-imx6q.c
> > b/arch/arm/mach-imx/mach-imx6q.c index 284bce1112d2..85c084a716ab
> > 100644
> > --- a/arch/arm/mach-imx/mach-imx6q.c
> > +++ b/arch/arm/mach-imx/mach-imx6q.c
> > @@ -245,21 +245,15 @@ static void __init imx6q_axi_init(void)
> >
> > static void __init imx6q_init_machine(void) {
> > - struct device *parent;
> > -
> > if (cpu_is_imx6q() && imx_get_soc_revision() ==
> IMX_CHIP_REVISION_2_0)
> > imx_print_silicon_rev("i.MX6QP",
> IMX_CHIP_REVISION_1_0);
> > else
> > imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" :
> "i.MX6Q",
> > imx_get_soc_revision());
> >
> > - parent = imx_soc_device_init();
> > - if (parent == NULL)
> > - pr_warn("failed to initialize soc device\n");
> > -
> > imx6q_enet_phy_init();
> >
> > - of_platform_default_populate(NULL, NULL, parent);
> > + of_platform_default_populate(NULL, NULL, NULL);
>
> I know this is already applied, but really we want to get rid of
> of_platform_default_populate calls and let the core code call it. i.MX is one of
> the last remaining platforms to fix.

Understand.

This one remained mainly because of
> 'parent'. Looks like there's some initcall ordering issues to fix though. Maybe
> moving things to init_late works? If not, moving the setup to drivers would be
> better if there's any ordering issues as with deferred probe, initcalls alone
> don't guarantee the order.

I did one patch before, but breaks i.MX6Q pm code,
https://patchwork.ozlabs.org/project/linux-imx/patch/
[email protected]/

Indeed there are some order issue, I will try again to clean up the stuff.

Thanks,
Peng.

>
> Rob

2020-10-29 09:57:10

by Rob Herring

[permalink] [raw]
Subject: Re: [PATCH V3 1/3] ARM: imx: use device_initcall for imx_soc_device_init

On Wed, May 20, 2020 at 1:01 AM <[email protected]> wrote:
>
> From: Peng Fan <[email protected]>
>
> This is preparation to move imx_soc_device_init to drivers/soc/imx/
>
> There is no reason to must put dt devices under /sys/devices/soc0,
> they could also be under /sys/devices/platform, so we could
> pass NULL as parent when calling of_platform_default_populate.
>
> Following soc-imx8.c soc-imx-scu.c using device_initcall, need
> to change return type to int type for imx_soc_device_init.
>
> Signed-off-by: Peng Fan <[email protected]>
> ---

> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index 284bce1112d2..85c084a716ab 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -245,21 +245,15 @@ static void __init imx6q_axi_init(void)
>
> static void __init imx6q_init_machine(void)
> {
> - struct device *parent;
> -
> if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
> imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0);
> else
> imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
> imx_get_soc_revision());
>
> - parent = imx_soc_device_init();
> - if (parent == NULL)
> - pr_warn("failed to initialize soc device\n");
> -
> imx6q_enet_phy_init();
>
> - of_platform_default_populate(NULL, NULL, parent);
> + of_platform_default_populate(NULL, NULL, NULL);

I know this is already applied, but really we want to get rid of
of_platform_default_populate calls and let the core code call it. i.MX
is one of the last remaining platforms to fix. This one remained
mainly because of 'parent'. Looks like there's some initcall ordering
issues to fix though. Maybe moving things to init_late works? If not,
moving the setup to drivers would be better if there's any ordering
issues as with deferred probe, initcalls alone don't guarantee the
order.

Rob