For development purpose, renesas_sdhi_probe() could be called w/
dma_ops = NULL to force the usage of PIO mode. In this case the
renesas_sdhi_enable_dma() will not be called before transferring data.
If renesas_sdhi_enable_dma() is not called, renesas_sdhi_clk_enable()
call from renesas_sdhi_probe() will configure SDBUF by calling the
renesas_sdhi_sdbuf_width() function, but then SDBUF will be reset in
tmio_mmc_host_probe() when calling tmio_mmc_reset() though host->reset().
If SDBUF is zero the data transfer will not work in PIO mode for RZ/G3S.
To fix this call again the renesas_sdhi_sdbuf_width(host, 16) in
renesas_sdhi_reset(). The call of renesas_sdhi_sdbuf_width() was not
removed from renesas_sdhi_clk_enable() as the host->reset() is optional.
Co-developed-by: Hien Huynh <[email protected]>
Signed-off-by: Hien Huynh <[email protected]>
Signed-off-by: Claudiu Beznea <[email protected]>
---
Changes in v2:
- fixed typos in commit description
- limit the comment lines to 80 chars
drivers/mmc/host/renesas_sdhi_core.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index f84f60139bcf..5233731a94c4 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -589,6 +589,12 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host, bool preserve)
sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
priv->needs_adjust_hs400 = false;
renesas_sdhi_set_clock(host, host->clk_cache);
+
+ /*
+ * In case the controller works in PIO mode the SDBUF
+ * needs to be set as its reset value is zero.
+ */
+ renesas_sdhi_sdbuf_width(host, 16);
} else if (priv->scc_ctl) {
renesas_sdhi_scc_reset(host, priv);
}
--
2.39.2
On Wed, 10 Apr 2024 at 15:54, Claudiu Beznea <[email protected]> wrote:
>
> For development purpose, renesas_sdhi_probe() could be called w/
> dma_ops = NULL to force the usage of PIO mode. In this case the
> renesas_sdhi_enable_dma() will not be called before transferring data.
>
> If renesas_sdhi_enable_dma() is not called, renesas_sdhi_clk_enable()
> call from renesas_sdhi_probe() will configure SDBUF by calling the
> renesas_sdhi_sdbuf_width() function, but then SDBUF will be reset in
> tmio_mmc_host_probe() when calling tmio_mmc_reset() though host->reset().
> If SDBUF is zero the data transfer will not work in PIO mode for RZ/G3S.
>
> To fix this call again the renesas_sdhi_sdbuf_width(host, 16) in
> renesas_sdhi_reset(). The call of renesas_sdhi_sdbuf_width() was not
> removed from renesas_sdhi_clk_enable() as the host->reset() is optional.
>
> Co-developed-by: Hien Huynh <[email protected]>
> Signed-off-by: Hien Huynh <[email protected]>
> Signed-off-by: Claudiu Beznea <[email protected]>
Wolfram, when you have the time, can we get your opinion on this one?
Kind regards
Uffe
> ---
>
> Changes in v2:
> - fixed typos in commit description
> - limit the comment lines to 80 chars
>
> drivers/mmc/host/renesas_sdhi_core.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
> index f84f60139bcf..5233731a94c4 100644
> --- a/drivers/mmc/host/renesas_sdhi_core.c
> +++ b/drivers/mmc/host/renesas_sdhi_core.c
> @@ -589,6 +589,12 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host, bool preserve)
> sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
> priv->needs_adjust_hs400 = false;
> renesas_sdhi_set_clock(host, host->clk_cache);
> +
> + /*
> + * In case the controller works in PIO mode the SDBUF
> + * needs to be set as its reset value is zero.
> + */
> + renesas_sdhi_sdbuf_width(host, 16);
> } else if (priv->scc_ctl) {
> renesas_sdhi_scc_reset(host, priv);
> }
> --
> 2.39.2
>
On Fri, Apr 26, 2024 at 07:08:10AM +0200, Ulf Hansson wrote:
> On Wed, 10 Apr 2024 at 15:54, Claudiu Beznea <[email protected]> wrote:
> >
> > For development purpose, renesas_sdhi_probe() could be called w/
> > dma_ops = NULL to force the usage of PIO mode. In this case the
> > renesas_sdhi_enable_dma() will not be called before transferring data.
> >
> > If renesas_sdhi_enable_dma() is not called, renesas_sdhi_clk_enable()
> > call from renesas_sdhi_probe() will configure SDBUF by calling the
> > renesas_sdhi_sdbuf_width() function, but then SDBUF will be reset in
> > tmio_mmc_host_probe() when calling tmio_mmc_reset() though host->reset().
> > If SDBUF is zero the data transfer will not work in PIO mode for RZ/G3S.
> >
> > To fix this call again the renesas_sdhi_sdbuf_width(host, 16) in
> > renesas_sdhi_reset(). The call of renesas_sdhi_sdbuf_width() was not
> > removed from renesas_sdhi_clk_enable() as the host->reset() is optional.
> >
> > Co-developed-by: Hien Huynh <[email protected]>
> > Signed-off-by: Hien Huynh <[email protected]>
> > Signed-off-by: Claudiu Beznea <[email protected]>
>
> Wolfram, when you have the time, can we get your opinion on this one?
Sure, I'll try to squeeze it in today. Thanks for the heads up!
Hi Claudiu,
On Wed, Apr 10, 2024 at 04:54:16PM +0300, Claudiu Beznea wrote:
> For development purpose, renesas_sdhi_probe() could be called w/
> dma_ops = NULL to force the usage of PIO mode. In this case the
> renesas_sdhi_enable_dma() will not be called before transferring data.
>
> If renesas_sdhi_enable_dma() is not called, renesas_sdhi_clk_enable()
> call from renesas_sdhi_probe() will configure SDBUF by calling the
> renesas_sdhi_sdbuf_width() function, but then SDBUF will be reset in
> tmio_mmc_host_probe() when calling tmio_mmc_reset() though host->reset().
> If SDBUF is zero the data transfer will not work in PIO mode for RZ/G3S.
>
> To fix this call again the renesas_sdhi_sdbuf_width(host, 16) in
> renesas_sdhi_reset(). The call of renesas_sdhi_sdbuf_width() was not
> removed from renesas_sdhi_clk_enable() as the host->reset() is optional.
So, I tried to find a place where we would need only one call to
renesas_sdhi_sdbuf_width() but I also couldn't find a sweet spot. So,
this approach seems also best to me.
> +
> + /*
> + * In case the controller works in PIO mode the SDBUF
> + * needs to be set as its reset value is zero.
> + */
But I think we can shorten the above comment to something like:
/* Ensure default value for this driver */
> + renesas_sdhi_sdbuf_width(host, 16);
D'accord?
Happy hacking,
Wolfram
Hi, Wolfram,
On 30.04.2024 12:10, Wolfram Sang wrote:
> Hi Claudiu,
>
> On Wed, Apr 10, 2024 at 04:54:16PM +0300, Claudiu Beznea wrote:
>> For development purpose, renesas_sdhi_probe() could be called w/
>> dma_ops = NULL to force the usage of PIO mode. In this case the
>> renesas_sdhi_enable_dma() will not be called before transferring data.
>>
>> If renesas_sdhi_enable_dma() is not called, renesas_sdhi_clk_enable()
>> call from renesas_sdhi_probe() will configure SDBUF by calling the
>> renesas_sdhi_sdbuf_width() function, but then SDBUF will be reset in
>> tmio_mmc_host_probe() when calling tmio_mmc_reset() though host->reset().
>> If SDBUF is zero the data transfer will not work in PIO mode for RZ/G3S.
>>
>> To fix this call again the renesas_sdhi_sdbuf_width(host, 16) in
>> renesas_sdhi_reset(). The call of renesas_sdhi_sdbuf_width() was not
>> removed from renesas_sdhi_clk_enable() as the host->reset() is optional.
>
> So, I tried to find a place where we would need only one call to
> renesas_sdhi_sdbuf_width() but I also couldn't find a sweet spot. So,
> this approach seems also best to me.
>
>> +
>> + /*
>> + * In case the controller works in PIO mode the SDBUF
>> + * needs to be set as its reset value is zero.
>> + */
>
> But I think we can shorten the above comment to something like:
>
> /* Ensure default value for this driver */
>> + renesas_sdhi_sdbuf_width(host, 16);
>
> D'accord?
Ok! I'm going to prepare a new version to change the comment.
Thank you,
Claudiu Beznea
>
> Happy hacking,
>
> Wolfram
>