I've updated the series accoring the feedback. Also added the mentioned
_nvmet_target_{setup|cleanup} helpers which reduced a lot of code.
Roughly 350 lines code less after the refactoring.
Maybe it's possible to refactor even more, e.g. this snippet
local nvmedev
nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
could be moved into _nvme_connect_subsys(). Though there are quiet a few tests
which want the nvmedev later on for something like
_run_fio_verify_io --size="${nvme_img_size}" \
--filename="/dev/${nvmedev}n1"
So we could return the nvmedev from _nvme_connect_subsys() but I don't know if
this a good idea. FWIW, it would also fix the current problem we face with
nvme/047 which seems to lack the second _find_nvme_dev() call.
original cover letter:
Max asked me to replace replace the 'nvme/rc: Avoid triggering host nvme-cli
autoconnect' feature with using allowed_host on the target side [1]
So while looking into this new feature, I first started to refactor existing
code so that it looks a bit more consistent. I think there is even more
potential to make it smaller, by introducing something similiar to
_nvmet_passthru_target_setup() and _nvmet_passthru_target_cleanup() for non
passthru tests. A lot of duplicated setup/cleanup code in many tests.
Except the last two patches are just refactoring patches. So if we decide to use
common target setup/cleanup helpers, I think we could add them before the last
two patches, which would make the last patch way smaller.
Daniel
[1] https://lore.kernel.org/all/[email protected]/
changes:
v2:
- updated commit messages
- moved the removal of subsys_name to the right patch
- added _nvmet_target_{setup|cleanup} helpers
this addresses also the 'appears unused' warning by ShellCheck
v1:
- initial version
https://lore.kernel.org/linux-nvme/[email protected]/
Daniel Wagner (12):
nvme/{003,004,005,013,046,049}: Group all variables declarations
nvme: Reorganize test preamble code section
nvme/rc: Add common subsystem nqn define
nvme: Use def_subsysnqn variable instead local variable
nvme/{041,042,043,044,045,048}: Remove local variable hostnqn and
hostid
nvme/rc: Add common file_path name define
nvme: Use def_file_path variable instead local variable
nvme/rc: Add common def_subsys_uuid define
nvme: Use def_subsys_uuid variable
nvme/rc: Add helper for adding/removing to allow list
nvme: Add explicitly host to allow_host list
nvme: Introduce nvmet_target_{setup/cleanup} common code
tests/nvme/003 | 12 ++-----
tests/nvme/004 | 23 ++++---------
tests/nvme/005 | 22 +++---------
tests/nvme/006 | 21 ++----------
tests/nvme/007 | 19 ++---------
tests/nvme/008 | 26 +++------------
tests/nvme/009 | 21 +++---------
tests/nvme/010 | 26 +++------------
tests/nvme/011 | 22 +++---------
tests/nvme/012 | 26 +++------------
tests/nvme/013 | 22 +++---------
tests/nvme/014 | 26 +++------------
tests/nvme/015 | 21 +++---------
tests/nvme/016 | 17 +++++-----
tests/nvme/017 | 26 ++++++---------
tests/nvme/018 | 21 +++---------
tests/nvme/019 | 26 +++------------
tests/nvme/020 | 21 +++---------
tests/nvme/021 | 21 +++---------
tests/nvme/022 | 21 +++---------
tests/nvme/023 | 26 +++------------
tests/nvme/024 | 21 +++---------
tests/nvme/025 | 21 +++---------
tests/nvme/026 | 21 +++---------
tests/nvme/027 | 20 +++--------
tests/nvme/028 | 20 +++--------
tests/nvme/029 | 26 +++------------
tests/nvme/030 | 19 ++++++-----
tests/nvme/031 | 14 ++++----
tests/nvme/033 | 9 ++---
tests/nvme/034 | 9 ++---
tests/nvme/035 | 9 ++---
tests/nvme/036 | 9 ++---
tests/nvme/037 | 8 ++---
tests/nvme/038 | 6 ++--
tests/nvme/039 | 4 +--
tests/nvme/040 | 28 +++++-----------
tests/nvme/041 | 49 +++++++++------------------
tests/nvme/042 | 55 ++++++++++--------------------
tests/nvme/043 | 52 ++++++++++-------------------
tests/nvme/044 | 71 +++++++++++++++------------------------
tests/nvme/045 | 62 ++++++++++++----------------------
tests/nvme/046 | 1 +
tests/nvme/047 | 30 ++++-------------
tests/nvme/048 | 42 +++++++----------------
tests/nvme/049 | 1 +
tests/nvme/rc | 90 +++++++++++++++++++++++++++++++++++++++++++++++---
47 files changed, 398 insertions(+), 765 deletions(-)
--
2.41.0
Add common file_path name as global definition so that we can reuse it.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/rc | 1 +
1 file changed, 1 insertion(+)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index c11848b59c49..9c802ddc872d 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -17,6 +17,7 @@ def_local_wwpn="0x20001100aa000002"
def_hostid="0f01fb42-9f7f-4856-b0b3-51e60b8de349"
def_hostnqn="nqn.2014-08.org.nvmexpress:uuid:${def_hostid}"
def_subsysnqn="blktests-subsystem-1"
+def_file_path="${TMPDIR}/img"
nvme_trtype=${nvme_trtype:-"loop"}
nvme_img_size=${nvme_img_size:-"1G"}
nvme_num_iter=${nvme_num_iter:-"1000"}
--
2.41.0
As all tests are using the same file path name anyway, use
the def_file_path variable.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/004 | 6 +++---
tests/nvme/005 | 6 +++---
tests/nvme/006 | 6 +++---
tests/nvme/007 | 9 +++------
tests/nvme/008 | 7 +++----
tests/nvme/009 | 7 +++----
tests/nvme/010 | 7 +++----
tests/nvme/011 | 8 +++-----
tests/nvme/012 | 7 +++----
tests/nvme/013 | 7 +++----
tests/nvme/014 | 7 +++----
tests/nvme/015 | 7 +++----
tests/nvme/017 | 11 ++++-------
tests/nvme/018 | 7 +++----
tests/nvme/019 | 7 +++----
tests/nvme/020 | 7 +++----
tests/nvme/021 | 7 +++----
tests/nvme/022 | 7 +++----
tests/nvme/023 | 7 +++----
tests/nvme/024 | 7 +++----
tests/nvme/025 | 7 +++----
tests/nvme/026 | 7 +++----
tests/nvme/027 | 7 +++----
tests/nvme/028 | 7 +++----
tests/nvme/029 | 7 +++----
tests/nvme/031 | 6 +++---
tests/nvme/040 | 7 +++----
tests/nvme/041 | 7 +++----
tests/nvme/042 | 7 +++----
tests/nvme/043 | 7 +++----
tests/nvme/044 | 7 +++----
tests/nvme/045 | 7 +++----
tests/nvme/047 | 7 +++----
tests/nvme/048 | 7 +++----
34 files changed, 103 insertions(+), 138 deletions(-)
diff --git a/tests/nvme/004 b/tests/nvme/004
index 0314ed3c949e..78b11c7b84c5 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -27,9 +27,9 @@ test() {
port="$(_create_nvmet_port "${nvme_trtype}")"
- truncate -s "${nvme_img_size}" "$TMPDIR/img"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "$TMPDIR/img")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -47,7 +47,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "$loop_dev"
- rm "$TMPDIR/img"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/005 b/tests/nvme/005
index 935b8634cb96..211b8affc32a 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -27,9 +27,9 @@ test() {
port="$(_create_nvmet_port "${nvme_trtype}")"
- truncate -s "${nvme_img_size}" "$TMPDIR/img"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "$TMPDIR/img")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -49,7 +49,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
losetup -d "$loop_dev"
- rm "$TMPDIR/img"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/006 b/tests/nvme/006
index 066acabb1175..f31633825a70 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -23,9 +23,9 @@ test() {
local port
local loop_dev
- truncate -s "${nvme_img_size}" "$TMPDIR/img"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "$TMPDIR/img")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -38,7 +38,7 @@ test() {
losetup -d "$loop_dev"
- rm "$TMPDIR/img"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/007 b/tests/nvme/007
index c6ba36cc4b4f..b6a4bc437103 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -20,13 +20,10 @@ test() {
_setup_nvmet
local port
- local file_path
- file_path="${TMPDIR}/img"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- truncate -s "${nvme_img_size}" "${file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -35,7 +32,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/008 b/tests/nvme/008
index c3fbcbc59686..a38926ef0051 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -23,11 +23,10 @@ test() {
local port
local nvmedev
local loop_dev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "${file_path}")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -50,7 +49,7 @@ test() {
losetup -d "${loop_dev}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/009 b/tests/nvme/009
index 88c27889fbe1..2c8ea7ead9b8 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -21,11 +21,10 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -44,7 +43,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/010 b/tests/nvme/010
index 38c062ec73f4..81f7d2024ee6 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -23,11 +23,10 @@ test() {
local port
local nvmedev
local loop_dev
- local file_path="${TMPDIR}/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "${file_path}")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -51,7 +50,7 @@ test() {
losetup -d "${loop_dev}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/011 b/tests/nvme/011
index 0dab74e7e5b5..e6f78867e283 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -22,12 +22,10 @@ test() {
local port
local nvmedev
- local file_path
- local file_path="${TMPDIR}/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -47,7 +45,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/012 b/tests/nvme/012
index 8ed57d3a5ab0..85549c25a1c6 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -27,11 +27,10 @@ test() {
local port
local nvmedev
local loop_dev
- local file_path="${TMPDIR}/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "${file_path}")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -54,7 +53,7 @@ test() {
losetup -d "${loop_dev}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/013 b/tests/nvme/013
index e3eb4e914750..355bc2e03557 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -25,11 +25,10 @@ test() {
local port
local nvmedev
- local file_path="${TMPDIR}/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -48,7 +47,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/014 b/tests/nvme/014
index cbafd802af16..44ae91e2210f 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -26,11 +26,10 @@ test() {
local size
local bs
local count
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "${file_path}")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -60,7 +59,7 @@ test() {
losetup -d "${loop_dev}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/015 b/tests/nvme/015
index b32d16a91de8..16e41ee65d42 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -25,11 +25,10 @@ test() {
local size
local bs
local count
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -55,7 +54,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/017 b/tests/nvme/017
index 6f7ef5882d3e..7cbf274c13b0 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -19,20 +19,17 @@ test() {
_setup_nvmet
local port
- local file_path
local iterations="${nvme_num_iter}"
- file_path="${TMPDIR}/img"
-
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
local genctr=1
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
for ((i = 2; i <= iterations; i++)); do
- _create_nvmet_ns "${def_subsysnqn}" "${i}" "${file_path}"
+ _create_nvmet_ns "${def_subsysnqn}" "${i}" "${def_file_path}"
done
port="$(_create_nvmet_port "${nvme_trtype}")"
@@ -49,7 +46,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/018 b/tests/nvme/018
index 155f094ea6b3..d1d2082e62ac 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -23,11 +23,10 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -52,7 +51,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/019 b/tests/nvme/019
index 4ac351cbb782..2628dea55ac8 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -23,13 +23,12 @@ test() {
local port
local nvmedev
local loop_dev
- local file_path="$TMPDIR/img"
local nblk_range="10,10,10,10,10,10,10,10,10,10"
local sblk_range="100,200,300,400,500,600,700,800,900,1000"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "${file_path}")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -52,7 +51,7 @@ test() {
losetup -d "${loop_dev}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/020 b/tests/nvme/020
index 744d4b7d6805..4a4f3c12da30 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -21,13 +21,12 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
local nblk_range="10,10,10,10,10,10,10,10,10,10"
local sblk_range="100,200,300,400,500,600,700,800,900,1000"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -46,7 +45,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/021 b/tests/nvme/021
index 1fd9bcbb3d23..11f82d64f378 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -22,11 +22,10 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -47,7 +46,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/022 b/tests/nvme/022
index 053991625250..586f6cdd3448 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -22,11 +22,10 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -47,7 +46,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/023 b/tests/nvme/023
index c10e5a0138a8..b13426cf5615 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -23,11 +23,10 @@ test() {
local port
local nvmedev
local loop_dev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "${file_path}")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -52,7 +51,7 @@ test() {
losetup -d "${loop_dev}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/024 b/tests/nvme/024
index d1d7f0bfb994..b7c7b3f64321 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -22,11 +22,10 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -46,7 +45,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/025 b/tests/nvme/025
index ea944830612b..04ceace5840b 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -22,11 +22,10 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -47,7 +46,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/026 b/tests/nvme/026
index f1193c20477c..a9dc7bc15db5 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -22,11 +22,10 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -47,7 +46,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/027 b/tests/nvme/027
index c097c51ea4f3..fda8c61405a5 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -22,11 +22,10 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -46,7 +45,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/028 b/tests/nvme/028
index 6e37be4893b1..8e42ea37a634 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -22,11 +22,10 @@ test() {
local port
local nvmedev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -46,7 +45,7 @@ test() {
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/029 b/tests/nvme/029
index 4d0ca997404b..7988faf5dd03 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -56,11 +56,10 @@ test() {
local port
local nvmedev
local loop_dev
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "${file_path}")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -89,7 +88,7 @@ test() {
losetup -d "${loop_dev}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/031 b/tests/nvme/031
index 27b08e96dd0b..d5c2561b941b 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -33,9 +33,9 @@ test() {
local loop_dev
local port
- truncate -s "${nvme_img_size}" "$TMPDIR/img"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "$TMPDIR/img")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
port="$(_create_nvmet_port "${nvme_trtype}")"
@@ -50,7 +50,7 @@ test() {
_remove_nvmet_port "${port}"
losetup -d "$loop_dev"
- rm "$TMPDIR/img"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/040 b/tests/nvme/040
index 8d7f68f9a2d7..452ecd690edf 100755
--- a/tests/nvme/040
+++ b/tests/nvme/040
@@ -21,14 +21,13 @@ test() {
_setup_nvmet
- local file_path="${TMPDIR}/img"
local port
local loop_dev
local nvmedev
local fio_pid
- truncate -s "${nvme_img_size}" "${file_path}"
- loop_dev="$(losetup -f --show "${file_path}")"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
port="$(_create_nvmet_port "${nvme_trtype}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}"
@@ -60,7 +59,7 @@ test() {
losetup -d "${loop_dev}"
- rm -f "${file_path}"
+ rm -f "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/041 b/tests/nvme/041
index 4c553251f379..0a0700533b7b 100755
--- a/tests/nvme/041
+++ b/tests/nvme/041
@@ -25,7 +25,6 @@ test() {
_setup_nvmet
local port
- local file_path="${TMPDIR}/img"
local hostkey
local ctrldev
@@ -35,9 +34,9 @@ test() {
return 1
fi
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"b92842df-a394-44b1-84a4-92ae7d112861"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
@@ -69,7 +68,7 @@ test() {
_remove_nvmet_host "${def_hostnqn}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/042 b/tests/nvme/042
index 866249ed598c..9180fce17b4e 100755
--- a/tests/nvme/042
+++ b/tests/nvme/042
@@ -25,15 +25,14 @@ test() {
_setup_nvmet
local port
- local file_path="${TMPDIR}/img"
local hmac
local key_len
local hostkey
local ctrldev
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
_create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
@@ -82,7 +81,7 @@ test() {
_remove_nvmet_host "${def_hostnqn}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/043 b/tests/nvme/043
index 5569a7a58ad5..f08422949efb 100755
--- a/tests/nvme/043
+++ b/tests/nvme/043
@@ -26,7 +26,6 @@ test() {
_setup_nvmet
local port
- local file_path="${TMPDIR}/img"
local hash
local dhgroup
local hostkey
@@ -38,9 +37,9 @@ test() {
return 1
fi
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
_create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" "${hostkey}"
@@ -84,7 +83,7 @@ test() {
_remove_nvmet_host "${def_hostnqn}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/044 b/tests/nvme/044
index 6c2cb602313c..5eb163db2c99 100755
--- a/tests/nvme/044
+++ b/tests/nvme/044
@@ -26,7 +26,6 @@ test() {
_setup_nvmet
local port
- local file_path="${TMPDIR}/img"
local hostkey
local ctrlkey
local ctrldev
@@ -43,9 +42,9 @@ test() {
return 1
fi
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
_create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" \
@@ -111,7 +110,7 @@ test() {
_remove_nvmet_host "${def_hostnqn}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/045 b/tests/nvme/045
index a936e7fb661f..8364d5ec3a2b 100755
--- a/tests/nvme/045
+++ b/tests/nvme/045
@@ -27,7 +27,6 @@ test() {
_setup_nvmet
local port
- local file_path="${TMPDIR}/img"
local hostkey
local new_hostkey
local ctrlkey
@@ -47,9 +46,9 @@ test() {
return 1
fi
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
_create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" "${hostkey}" "${ctrlkey}"
@@ -124,7 +123,7 @@ test() {
_remove_nvmet_host "${def_hostnqn}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/047 b/tests/nvme/047
index b435dd3cecba..66032f679ae2 100755
--- a/tests/nvme/047
+++ b/tests/nvme/047
@@ -26,11 +26,10 @@ test() {
local nvmedev
local loop_dev
local rand_io_size
- local file_path="$TMPDIR/img"
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "${file_path}")"
+ loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
@@ -61,7 +60,7 @@ test() {
losetup -d "${loop_dev}"
- rm "${file_path}"
+ rm "${def_file_path}"
echo "Test complete"
}
diff --git a/tests/nvme/048 b/tests/nvme/048
index f9a19b1e655e..6a05feae9b82 100755
--- a/tests/nvme/048
+++ b/tests/nvme/048
@@ -86,13 +86,12 @@ test() {
_setup_nvmet
local cfs_path="${NVMET_CFS}/subsystems/${def_subsysnqn}"
- local file_path="${TMPDIR}/img"
local skipped=false
local port
- truncate -s "${nvme_img_size}" "${file_path}"
+ truncate -s "${nvme_img_size}" "${def_file_path}"
- _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
"b92842df-a394-44b1-84a4-92ae7d112861"
port="$(_create_nvmet_port "${nvme_trtype}")"
@@ -124,7 +123,7 @@ test() {
_remove_nvmet_port "${port}"
_remove_nvmet_host "${def_hostnqn}"
- rm "${file_path}"
+ rm "${def_file_path}"
if [[ "${skipped}" = true ]] ; then
return 1
--
2.41.0
As all tests are using the same subsys uuid name anyway, use
the def_subsys_uuid variable.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/004 | 2 +-
tests/nvme/005 | 2 +-
tests/nvme/006 | 2 +-
tests/nvme/007 | 2 +-
tests/nvme/008 | 2 +-
tests/nvme/009 | 2 +-
tests/nvme/010 | 2 +-
tests/nvme/011 | 2 +-
tests/nvme/012 | 2 +-
tests/nvme/013 | 2 +-
tests/nvme/014 | 2 +-
tests/nvme/015 | 2 +-
tests/nvme/017 | 2 +-
tests/nvme/018 | 2 +-
tests/nvme/019 | 2 +-
tests/nvme/020 | 2 +-
tests/nvme/021 | 2 +-
tests/nvme/022 | 2 +-
tests/nvme/023 | 2 +-
tests/nvme/024 | 2 +-
tests/nvme/025 | 2 +-
tests/nvme/026 | 2 +-
tests/nvme/027 | 2 +-
tests/nvme/028 | 2 +-
tests/nvme/029 | 2 +-
tests/nvme/041 | 2 +-
tests/nvme/047 | 2 +-
tests/nvme/048 | 2 +-
28 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/tests/nvme/004 b/tests/nvme/004
index 78b11c7b84c5..54d74b61f689 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -32,7 +32,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
diff --git a/tests/nvme/005 b/tests/nvme/005
index 211b8affc32a..8e3ddfe75e2f 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -32,7 +32,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
diff --git a/tests/nvme/006 b/tests/nvme/006
index f31633825a70..910204aaeb90 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -28,7 +28,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/007 b/tests/nvme/007
index b6a4bc437103..db00bdcc2d08 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -24,7 +24,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/008 b/tests/nvme/008
index a38926ef0051..752ab30a756b 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -29,7 +29,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/009 b/tests/nvme/009
index 2c8ea7ead9b8..7debd837cc76 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -25,7 +25,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/010 b/tests/nvme/010
index 81f7d2024ee6..cba711b29af8 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -29,7 +29,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/011 b/tests/nvme/011
index e6f78867e283..ba2718d81bd9 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -26,7 +26,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/012 b/tests/nvme/012
index 85549c25a1c6..629b5194435e 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -33,7 +33,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/013 b/tests/nvme/013
index 355bc2e03557..ca51544b82d1 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -29,7 +29,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/014 b/tests/nvme/014
index 44ae91e2210f..6d27300cfb30 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -32,7 +32,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/015 b/tests/nvme/015
index 16e41ee65d42..1b3aa4aa36c2 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -29,7 +29,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/017 b/tests/nvme/017
index 7cbf274c13b0..aa0a3fefae90 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -26,7 +26,7 @@ test() {
local genctr=1
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
for ((i = 2; i <= iterations; i++)); do
_create_nvmet_ns "${def_subsysnqn}" "${i}" "${def_file_path}"
diff --git a/tests/nvme/018 b/tests/nvme/018
index d1d2082e62ac..b66056d43041 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -27,7 +27,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/019 b/tests/nvme/019
index 2628dea55ac8..b456b38d038e 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -31,7 +31,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/020 b/tests/nvme/020
index 4a4f3c12da30..ba88921d75af 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -27,7 +27,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/021 b/tests/nvme/021
index 11f82d64f378..02ef9727ee59 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -26,7 +26,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/022 b/tests/nvme/022
index 586f6cdd3448..74c12c3e0ba9 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -26,7 +26,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/023 b/tests/nvme/023
index b13426cf5615..413b6afa6d14 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -29,7 +29,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/024 b/tests/nvme/024
index b7c7b3f64321..1baf5487ae64 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -26,7 +26,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/025 b/tests/nvme/025
index 04ceace5840b..9eecd4d4a604 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -26,7 +26,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/026 b/tests/nvme/026
index a9dc7bc15db5..8a8bc58170e2 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -26,7 +26,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/027 b/tests/nvme/027
index fda8c61405a5..723e721202be 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -26,7 +26,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/028 b/tests/nvme/028
index 8e42ea37a634..d4e62e8cae1c 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -26,7 +26,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/029 b/tests/nvme/029
index 7988faf5dd03..b113e387f1fa 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -62,7 +62,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/041 b/tests/nvme/041
index 0a0700533b7b..cb2766619b0e 100755
--- a/tests/nvme/041
+++ b/tests/nvme/041
@@ -37,7 +37,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "b92842df-a394-44b1-84a4-92ae7d112861"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
_create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" "${hostkey}"
diff --git a/tests/nvme/047 b/tests/nvme/047
index 66032f679ae2..2b81f7ea9ffd 100755
--- a/tests/nvme/047
+++ b/tests/nvme/047
@@ -32,7 +32,7 @@ test() {
loop_dev="$(losetup -f --show "${def_file_path}")"
_create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "91fdba0d-f87b-4c25-b80f-db7be1418b9e"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
diff --git a/tests/nvme/048 b/tests/nvme/048
index 6a05feae9b82..19234a5b3791 100755
--- a/tests/nvme/048
+++ b/tests/nvme/048
@@ -92,7 +92,7 @@ test() {
truncate -s "${nvme_img_size}" "${def_file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "b92842df-a394-44b1-84a4-92ae7d112861"
+ "${def_subsys_uuid}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
--
2.41.0
Add two helpers to add or remove the host from the allow list of the
subsystem.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/rc | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 7f5829a2e58d..706f95d74a4b 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -612,6 +612,23 @@ _create_nvmet_subsystem() {
_create_nvmet_ns "${nvmet_subsystem}" "1" "${blkdev}" "${uuid}"
}
+_add_nvmet_allow_hosts() {
+ local nvmet_subsystem="$1"
+ local nvmet_hostnqn="$2"
+ local cfs_path="${NVMET_CFS}/subsystems/${nvmet_subsystem}"
+ local host_path="${NVMET_CFS}/hosts/${nvmet_hostnqn}"
+
+ ln -s "${host_path}" "${cfs_path}/allowed_hosts/${nvmet_hostnqn}"
+}
+
+_remove_nvmet_allow_hosts() {
+ local nvmet_subsystem="$1"
+ local nvmet_hostnqn="$2"
+ local cfs_path="${NVMET_CFS}/subsystems/${nvmet_subsystem}"
+
+ rm "${cfs_path}/allowed_hosts/${nvmet_hostnqn}"
+}
+
_create_nvmet_host() {
local nvmet_subsystem="$1"
local nvmet_hostnqn="$2"
@@ -621,8 +638,7 @@ _create_nvmet_host() {
local host_path="${NVMET_CFS}/hosts/${nvmet_hostnqn}"
mkdir "${host_path}"
- echo 0 > "${cfs_path}/attr_allow_any_host"
- ln -s "${host_path}" "${cfs_path}/allowed_hosts/${nvmet_hostnqn}"
+ _add_nvmet_allow_hosts "${nvmet_subsystem}" "${nvmet_hostnqn}"
if [[ "${nvmet_hostkey}" ]] ; then
echo "${nvmet_hostkey}" > "${host_path}/dhchap_key"
fi
--
2.41.0
Add common subsys uuid as global definition so that we can reuse it.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/rc | 1 +
1 file changed, 1 insertion(+)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 9c802ddc872d..7f5829a2e58d 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -17,6 +17,7 @@ def_local_wwpn="0x20001100aa000002"
def_hostid="0f01fb42-9f7f-4856-b0b3-51e60b8de349"
def_hostnqn="nqn.2014-08.org.nvmexpress:uuid:${def_hostid}"
def_subsysnqn="blktests-subsystem-1"
+def_subsys_uuid="91fdba0d-f87b-4c25-b80f-db7be1418b9e"
def_file_path="${TMPDIR}/img"
nvme_trtype=${nvme_trtype:-"loop"}
nvme_img_size=${nvme_img_size:-"1G"}
--
2.41.0
As all tests are using the same subsystem nqn anyway, use
the def_subsysnqn variable and drop the local subsys_name
variable.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/003 | 8 ++++----
tests/nvme/004 | 14 +++++++-------
tests/nvme/005 | 12 ++++++------
tests/nvme/006 | 9 ++++-----
tests/nvme/007 | 9 ++++-----
tests/nvme/008 | 15 +++++++--------
tests/nvme/009 | 15 +++++++--------
tests/nvme/010 | 15 +++++++--------
tests/nvme/011 | 15 +++++++--------
tests/nvme/012 | 15 +++++++--------
tests/nvme/013 | 15 +++++++--------
tests/nvme/014 | 15 +++++++--------
tests/nvme/015 | 15 +++++++--------
tests/nvme/016 | 13 ++++++-------
tests/nvme/017 | 13 ++++++-------
tests/nvme/018 | 15 +++++++--------
tests/nvme/019 | 15 +++++++--------
tests/nvme/020 | 15 +++++++--------
tests/nvme/021 | 15 +++++++--------
tests/nvme/022 | 15 +++++++--------
tests/nvme/023 | 15 +++++++--------
tests/nvme/024 | 15 +++++++--------
tests/nvme/025 | 15 +++++++--------
tests/nvme/026 | 15 +++++++--------
tests/nvme/027 | 15 +++++++--------
tests/nvme/028 | 15 +++++++--------
tests/nvme/029 | 15 +++++++--------
tests/nvme/033 | 2 +-
tests/nvme/034 | 2 +-
tests/nvme/035 | 2 +-
tests/nvme/036 | 2 +-
tests/nvme/038 | 2 +-
tests/nvme/040 | 13 ++++++-------
tests/nvme/041 | 21 ++++++++++-----------
tests/nvme/042 | 23 +++++++++++------------
tests/nvme/043 | 18 +++++++++---------
tests/nvme/044 | 31 +++++++++++++++----------------
tests/nvme/045 | 27 +++++++++++++--------------
tests/nvme/047 | 19 +++++++++----------
tests/nvme/048 | 23 +++++++++++------------
40 files changed, 266 insertions(+), 297 deletions(-)
diff --git a/tests/nvme/003 b/tests/nvme/003
index aa26abf8d8b3..71b82ce758a3 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -29,8 +29,8 @@ test() {
loop_dev="$(losetup -f)"
- _create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}"
- _add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
_nvme_connect_subsys "${nvme_trtype}" nqn.2014-08.org.nvmexpress.discovery
@@ -46,8 +46,8 @@ test() {
fi
_nvme_disconnect_subsys nqn.2014-08.org.nvmexpress.discovery
- _remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
- _remove_nvmet_subsystem "blktests-subsystem-1"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
echo "Test complete"
diff --git a/tests/nvme/004 b/tests/nvme/004
index 1e5c2b8b3e87..0314ed3c949e 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -31,20 +31,20 @@ test() {
loop_dev="$(losetup -f --show "$TMPDIR/img")"
- _create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- _add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" blktests-subsystem-1
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
local nvmedev
- nvmedev=$(_find_nvme_dev "blktests-subsystem-1")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
- _nvme_disconnect_subsys blktests-subsystem-1
- _remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
- _remove_nvmet_subsystem "blktests-subsystem-1"
+ _nvme_disconnect_subsys ${def_subsysnqn}
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "$loop_dev"
rm "$TMPDIR/img"
diff --git a/tests/nvme/005 b/tests/nvme/005
index 836854086822..935b8634cb96 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -31,23 +31,23 @@ test() {
loop_dev="$(losetup -f --show "$TMPDIR/img")"
- _create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- _add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" blktests-subsystem-1
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "blktests-subsystem-1")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
udevadm settle
echo 1 > "/sys/class/nvme/${nvmedev}/reset_controller"
_nvme_disconnect_ctrl "${nvmedev}"
- _remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- _remove_nvmet_subsystem "blktests-subsystem-1"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
losetup -d "$loop_dev"
rm "$TMPDIR/img"
diff --git a/tests/nvme/006 b/tests/nvme/006
index b44c56b6a25d..066acabb1175 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -22,19 +22,18 @@ test() {
local port
local loop_dev
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "$TMPDIR/img"
loop_dev="$(losetup -f --show "$TMPDIR/img")"
- _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "$loop_dev"
diff --git a/tests/nvme/007 b/tests/nvme/007
index 112432df7a9d..c6ba36cc4b4f 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -21,19 +21,18 @@ test() {
local port
local file_path
- local subsys_name="blktests-subsystem-1"
file_path="${TMPDIR}/img"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm "${file_path}"
diff --git a/tests/nvme/008 b/tests/nvme/008
index 5abc4240ca46..c3fbcbc59686 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -24,29 +24,28 @@ test() {
local nvmedev
local loop_dev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
loop_dev="$(losetup -f --show "${file_path}")"
- _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "${loop_dev}"
diff --git a/tests/nvme/009 b/tests/nvme/009
index 491d3c809ab0..88c27889fbe1 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -22,27 +22,26 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm "${file_path}"
diff --git a/tests/nvme/010 b/tests/nvme/010
index d2eb95311510..38c062ec73f4 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -24,30 +24,29 @@ test() {
local nvmedev
local loop_dev
local file_path="${TMPDIR}/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
loop_dev="$(losetup -f --show "${file_path}")"
- _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
_run_fio_verify_io --size="${nvme_img_size}" \
--filename="/dev/${nvmedev}n1"
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "${loop_dev}"
diff --git a/tests/nvme/011 b/tests/nvme/011
index da8cbac11124..0dab74e7e5b5 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -24,28 +24,27 @@ test() {
local nvmedev
local file_path
local file_path="${TMPDIR}/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
_run_fio_verify_io --size="${nvme_img_size}" \
--filename="/dev/${nvmedev}n1"
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm "${file_path}"
diff --git a/tests/nvme/012 b/tests/nvme/012
index efe227538c57..8ed57d3a5ab0 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -28,29 +28,28 @@ test() {
local nvmedev
local loop_dev
local file_path="${TMPDIR}/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
loop_dev="$(losetup -f --show "${file_path}")"
- _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
_xfs_run_fio_verify_io "/dev/${nvmedev}n1"
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "${loop_dev}"
diff --git a/tests/nvme/013 b/tests/nvme/013
index 2be8681616d1..e3eb4e914750 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -26,27 +26,26 @@ test() {
local port
local nvmedev
local file_path="${TMPDIR}/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
_xfs_run_fio_verify_io "/dev/${nvmedev}n1"
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm "${file_path}"
diff --git a/tests/nvme/014 b/tests/nvme/014
index 55d920f2660b..cbafd802af16 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -27,20 +27,19 @@ test() {
local bs
local count
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
loop_dev="$(losetup -f --show "${file_path}")"
- _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
@@ -53,10 +52,10 @@ test() {
nvme flush "/dev/${nvmedev}" -n 1
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "${loop_dev}"
diff --git a/tests/nvme/015 b/tests/nvme/015
index 071141380e43..b32d16a91de8 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -26,18 +26,17 @@ test() {
local bs
local count
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
@@ -50,10 +49,10 @@ test() {
nvme flush "/dev/${nvmedev}n1" -n 1
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm "${file_path}"
diff --git a/tests/nvme/016 b/tests/nvme/016
index cac0c0509aca..908abbdaaa75 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -21,30 +21,29 @@ test() {
local port
local iterations="${nvme_num_iter}"
local loop_dev
- local subsys_nqn="blktests-subsystem-1"
loop_dev="$(losetup -f)"
local genctr=1
- _create_nvmet_subsystem "${subsys_nqn}" "${loop_dev}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}"
for ((i = 2; i <= iterations; i++)); do
- _create_nvmet_ns "${subsys_nqn}" "${i}" "${loop_dev}"
+ _create_nvmet_ns "${def_subsysnqn}" "${i}" "${loop_dev}"
done
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "$port" "${subsys_nqn}"
+ _add_nvmet_subsys_to_port "$port" "${def_subsysnqn}"
genctr=$(_check_genctr "${genctr}" "adding a subsystem to a port")
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_nqn}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
_remove_nvmet_port "${port}"
for ((i = iterations; i > 1; i--)); do
- _remove_nvmet_ns "${subsys_nqn}" "$i"
+ _remove_nvmet_ns "${def_subsysnqn}" "$i"
done
- _remove_nvmet_subsystem "${subsys_nqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
echo "Test complete"
}
diff --git a/tests/nvme/017 b/tests/nvme/017
index 429a25e8e011..6f7ef5882d3e 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -21,7 +21,6 @@ test() {
local port
local file_path
local iterations="${nvme_num_iter}"
- local subsys_name="blktests-subsystem-1"
file_path="${TMPDIR}/img"
@@ -29,26 +28,26 @@ test() {
local genctr=1
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
for ((i = 2; i <= iterations; i++)); do
- _create_nvmet_ns "${subsys_name}" "${i}" "${file_path}"
+ _create_nvmet_ns "${def_subsysnqn}" "${i}" "${file_path}"
done
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
genctr=$(_check_genctr "${genctr}" "adding a subsystem to a port")
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
_remove_nvmet_port "${port}"
for ((i = iterations; i > 1; i--)); do
- _remove_nvmet_ns "${subsys_name}" "$i"
+ _remove_nvmet_ns "${def_subsysnqn}" "$i"
done
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
rm "${file_path}"
diff --git a/tests/nvme/018 b/tests/nvme/018
index 78e9b2bb94d8..155f094ea6b3 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -24,18 +24,17 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
@@ -47,10 +46,10 @@ test() {
nvme read "/dev/${nvmedev}n1" -s "$sectors" -c 0 -z "$bs" &>"$FULL" \
&& echo "ERROR: nvme read for out of range LBA was not rejected"
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm "${file_path}"
diff --git a/tests/nvme/019 b/tests/nvme/019
index 9fff8ccaac9c..4ac351cbb782 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -24,7 +24,6 @@ test() {
local nvmedev
local loop_dev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
local nblk_range="10,10,10,10,10,10,10,10,10,10"
local sblk_range="100,200,300,400,500,600,700,800,900,1000"
@@ -32,23 +31,23 @@ test() {
loop_dev="$(losetup -f --show "${file_path}")"
- _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
nvme dsm "/dev/${nvmedev}" -n 1 -d -s "${sblk_range}" -b "${nblk_range}"
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "${loop_dev}"
diff --git a/tests/nvme/020 b/tests/nvme/020
index 1966d5925213..744d4b7d6805 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -22,29 +22,28 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
local nblk_range="10,10,10,10,10,10,10,10,10,10"
local sblk_range="100,200,300,400,500,600,700,800,900,1000"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
nvme dsm "/dev/${nvmedev}" -n 1 -d -s "${sblk_range}" -b "${nblk_range}"
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm -f "${file_path}"
diff --git a/tests/nvme/021 b/tests/nvme/021
index 1fefc0fbca00..1fd9bcbb3d23 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -23,18 +23,17 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
@@ -42,10 +41,10 @@ test() {
echo "ERROR: device not listed"
fi
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm -f "${file_path}"
diff --git a/tests/nvme/022 b/tests/nvme/022
index 1ff915786f86..053991625250 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -23,18 +23,17 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
@@ -42,10 +41,10 @@ test() {
echo "ERROR: reset failed"
fi
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm -f "${file_path}"
diff --git a/tests/nvme/023 b/tests/nvme/023
index 90316230a3d7..c10e5a0138a8 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -24,20 +24,19 @@ test() {
local nvmedev
local loop_dev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
loop_dev="$(losetup -f --show "${file_path}")"
- _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
@@ -45,10 +44,10 @@ test() {
echo "ERROR: smart-log bdev-ns failed"
fi
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "${loop_dev}"
diff --git a/tests/nvme/024 b/tests/nvme/024
index 384a8266e741..d1d7f0bfb994 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -23,28 +23,27 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
if ! nvme smart-log "/dev/${nvmedev}" -n 1 >> "$FULL" 2>&1; then
echo "ERROR: smart-log file-ns failed"
fi
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm -f "${file_path}"
diff --git a/tests/nvme/025 b/tests/nvme/025
index 815223d1c28d..ea944830612b 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -23,18 +23,17 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
@@ -42,10 +41,10 @@ test() {
echo "ERROR: effects-log failed"
fi
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm -f "${file_path}"
diff --git a/tests/nvme/026 b/tests/nvme/026
index d2203f19f026..f1193c20477c 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -23,18 +23,17 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
@@ -42,10 +41,10 @@ test() {
echo "ERROR: ns-desc failed"
fi
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm -f "${file_path}"
diff --git a/tests/nvme/027 b/tests/nvme/027
index 97fe70e78344..c097c51ea4f3 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -23,28 +23,27 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
if ! nvme ns-rescan "/dev/${nvmedev}" >> "$FULL" 2>&1; then
echo "ERROR: ns-rescan failed"
fi
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm -f "${file_path}"
diff --git a/tests/nvme/028 b/tests/nvme/028
index c539620bee28..6e37be4893b1 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -23,28 +23,27 @@ test() {
local port
local nvmedev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
if ! nvme list-subsys 2>> "$FULL" | grep -q "${nvme_trtype}"; then
echo "ERROR: list-subsys"
fi
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
rm -f "${file_path}"
diff --git a/tests/nvme/029 b/tests/nvme/029
index c6d38b42af70..4d0ca997404b 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -57,20 +57,19 @@ test() {
local nvmedev
local loop_dev
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
loop_dev="$(losetup -f --show "${file_path}")"
- _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
@@ -82,10 +81,10 @@ test() {
test_user_io "$dev" 511 1023 > "$FULL" 2>&1 || echo FAIL
test_user_io "$dev" 511 1025 > "$FULL" 2>&1 || echo FAIL
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "${loop_dev}"
diff --git a/tests/nvme/033 b/tests/nvme/033
index 5a4fac03bea0..46a520ae01fa 100755
--- a/tests/nvme/033
+++ b/tests/nvme/033
@@ -49,7 +49,7 @@ test_device() {
_setup_nvmet
- local subsys="blktests-subsystem-1"
+ local subsys="${def_subsysnqn}"
local nsdev
local port
diff --git a/tests/nvme/034 b/tests/nvme/034
index 334b2525d1b6..3c65d92cbaea 100755
--- a/tests/nvme/034
+++ b/tests/nvme/034
@@ -19,7 +19,7 @@ test_device() {
_setup_nvmet
- local subsys="blktests-subsystem-1"
+ local subsys="${def_subsysnqn}"
local ctrldev
local nsdev
local port
diff --git a/tests/nvme/035 b/tests/nvme/035
index 68a9b608920e..c705d9cf25a4 100755
--- a/tests/nvme/035
+++ b/tests/nvme/035
@@ -25,7 +25,7 @@ test_device() {
_setup_nvmet
- local subsys="blktests-subsystem-1"
+ local subsys="${def_subsysnqn}"
local ctrldev
local nsdev
local port
diff --git a/tests/nvme/036 b/tests/nvme/036
index c3fc5d4a948d..2e933cc41928 100755
--- a/tests/nvme/036
+++ b/tests/nvme/036
@@ -18,7 +18,7 @@ test_device() {
_setup_nvmet
- local subsys="blktests-subsystem-1"
+ local subsys="${def_subsysnqn}"
local ctrldev
local port
diff --git a/tests/nvme/038 b/tests/nvme/038
index 5af28da03c36..007b5f425312 100755
--- a/tests/nvme/038
+++ b/tests/nvme/038
@@ -23,7 +23,7 @@ test() {
_setup_nvmet
- local subsys_path="${NVMET_CFS}/subsystems/blktests-subsystem-1"
+ local subsys_path="${NVMET_CFS}/subsystems/${def_subsysnqn}"
local port
mkdir -p "${subsys_path}"
diff --git a/tests/nvme/040 b/tests/nvme/040
index 3b76753132f3..8d7f68f9a2d7 100755
--- a/tests/nvme/040
+++ b/tests/nvme/040
@@ -21,7 +21,6 @@ test() {
_setup_nvmet
- local subsys="blktests-subsystem-1"
local file_path="${TMPDIR}/img"
local port
local loop_dev
@@ -32,11 +31,11 @@ test() {
loop_dev="$(losetup -f --show "${file_path}")"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _create_nvmet_subsystem "${subsys}" "${loop_dev}"
- _add_nvmet_subsys_to_port "${port}" "${subsys}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
udevadm settle
- nvmedev=$(_find_nvme_dev "${subsys}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
# start fio job
echo "starting background fio"
@@ -55,8 +54,8 @@ test() {
{ kill "${fio_pid}"; wait; } &> /dev/null
- _remove_nvmet_subsystem_from_port "${port}" "${subsys}"
- _remove_nvmet_subsystem "${subsys}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "${loop_dev}"
diff --git a/tests/nvme/041 b/tests/nvme/041
index d8937915d622..fbceaa1cb2d5 100755
--- a/tests/nvme/041
+++ b/tests/nvme/041
@@ -25,7 +25,6 @@ test() {
_setup_nvmet
local port
- local subsys_name="blktests-subsystem-1"
local hostid
local hostnqn
local file_path="${TMPDIR}/img"
@@ -34,7 +33,7 @@ test() {
hostid="${def_hostid}"
hostnqn="${def_hostnqn}"
- hostkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
+ hostkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$hostkey" ] ; then
echo "nvme gen-dhchap-key failed"
return 1
@@ -42,33 +41,33 @@ test() {
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"b92842df-a394-44b1-84a4-92ae7d112861"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _create_nvmet_host "${subsys_name}" "${hostnqn}" "${hostkey}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
+ _create_nvmet_host "${def_subsysnqn}" "${hostnqn}" "${hostkey}"
# Test unauthenticated connection (should fail)
echo "Test unauthenticated connection (should fail)"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}"
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
# Test authenticated connection
echo "Test authenticated connection"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/042 b/tests/nvme/042
index af291cb33a04..28d712e835df 100755
--- a/tests/nvme/042
+++ b/tests/nvme/042
@@ -25,7 +25,6 @@ test() {
_setup_nvmet
local port
- local subsys_name="blktests-subsystem-1"
local hostid
local hostnqn
local file_path="${TMPDIR}/img"
@@ -39,50 +38,50 @@ test() {
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _create_nvmet_host "${subsys_name}" "${hostnqn}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
+ _create_nvmet_host "${def_subsysnqn}" "${hostnqn}"
for hmac in 0 1 2 3; do
echo "Testing hmac ${hmac}"
- hostkey="$(nvme gen-dhchap-key --hmac=${hmac} -n ${subsys_name} 2> /dev/null)"
+ hostkey="$(nvme gen-dhchap-key --hmac=${hmac} -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$hostkey" ] ; then
echo "couldn't generate host key for hmac ${hmac}"
return 1
fi
_set_nvmet_hostkey "${hostnqn}" "${hostkey}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
done
for key_len in 32 48 64; do
echo "Testing key length ${key_len}"
- hostkey="$(nvme gen-dhchap-key --key-length=${key_len} -n ${subsys_name} 2> /dev/null)"
+ hostkey="$(nvme gen-dhchap-key --key-length=${key_len} -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$hostkey" ] ; then
echo "couldn't generate host key for length ${key_len}"
return 1
fi
_set_nvmet_hostkey "${hostnqn}" "${hostkey}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
done
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/043 b/tests/nvme/043
index 4a37f91e50c3..3dc543fd55d3 100755
--- a/tests/nvme/043
+++ b/tests/nvme/043
@@ -45,10 +45,10 @@ test() {
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _create_nvmet_host "${subsys_name}" "${hostnqn}" "${hostkey}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
+ _create_nvmet_host "${def_subsysnqn}" "${hostnqn}" "${hostkey}"
for hash in "hmac(sha256)" "hmac(sha384)" "hmac(sha512)" ; do
@@ -56,14 +56,14 @@ test() {
_set_nvmet_hash "${hostnqn}" "${hash}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
done
for dhgroup in "ffdhe2048" "ffdhe3072" "ffdhe4096" "ffdhe6144" "ffdhe8192" ; do
@@ -72,18 +72,18 @@ test() {
_set_nvmet_dhgroup "${hostnqn}" "${dhgroup}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
done
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/044 b/tests/nvme/044
index 27cb343f5ea7..608a086a0864 100755
--- a/tests/nvme/044
+++ b/tests/nvme/044
@@ -26,7 +26,6 @@ test() {
_setup_nvmet
local port
- local subsys_name="blktests-subsystem-1"
local hostid
local hostnqn
local file_path="${TMPDIR}/img"
@@ -37,13 +36,13 @@ test() {
hostid="${def_hostid}"
hostnqn="${def_hostnqn}"
- hostkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
+ hostkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$hostkey" ] ; then
echo "failed to generate host key"
return 1
fi
- ctrlkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
+ ctrlkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$ctrlkey" ] ; then
echo "failed to generate ctrl key"
return 1
@@ -51,29 +50,29 @@ test() {
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _create_nvmet_host "${subsys_name}" "${hostnqn}" \
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
+ _create_nvmet_host "${def_subsysnqn}" "${hostnqn}" \
"${hostkey}" "${ctrlkey}"
_set_nvmet_dhgroup "${hostnqn}" "ffdhe2048"
# Step 1: Connect with host authentication only
echo "Test host authentication"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
# Step 2: Connect with host authentication
# and invalid ctrl authentication
echo "Test invalid ctrl authentication (should fail)"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}" \
@@ -81,12 +80,12 @@ test() {
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
# Step 3: Connect with host authentication
# and valid ctrl authentication
echo "Test valid ctrl authentication"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}" \
@@ -94,13 +93,13 @@ test() {
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
# Step 4: Connect with host authentication
# and invalid ctrl key
echo "Test invalid ctrl key (should fail)"
invkey="DHHC-1:00:Jc/My1o0qtLCWRp+sHhAVafdfaS7YQOMYhk9zSmlatobqB8C:"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}" \
@@ -108,10 +107,10 @@ test() {
udevadm settle
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/045 b/tests/nvme/045
index 005d62d4f886..b8d886aaf9e8 100755
--- a/tests/nvme/045
+++ b/tests/nvme/045
@@ -27,7 +27,6 @@ test() {
_setup_nvmet
local port
- local subsys_name="blktests-subsystem-1"
local hostid
local hostnqn
local file_path="${TMPDIR}/img"
@@ -41,13 +40,13 @@ test() {
hostid="${def_hostid}"
hostnqn="${def_hostnqn}"
- hostkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
+ hostkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$hostkey" ] ; then
echo "failed to generate host key"
return 1
fi
- ctrlkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
+ ctrlkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$ctrlkey" ] ; then
echo "failed to generate ctrl key"
return 1
@@ -55,14 +54,14 @@ test() {
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}"
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _create_nvmet_host "${subsys_name}" "${hostnqn}" "${hostkey}" "${ctrlkey}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
+ _create_nvmet_host "${def_subsysnqn}" "${hostnqn}" "${hostkey}" "${ctrlkey}"
_set_nvmet_dhgroup "${hostnqn}" "ffdhe2048"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--dhchap-secret "${hostkey}" \
@@ -72,7 +71,7 @@ test() {
echo "Re-authenticate with original host key"
- ctrldev=$(_find_nvme_dev "${subsys_name}")
+ ctrldev=$(_find_nvme_dev "${def_subsysnqn}")
if [ -z "$ctrldev" ] ; then
echo "nvme controller not found"
fi
@@ -81,7 +80,7 @@ test() {
echo "Renew host key on the controller"
- new_hostkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
+ new_hostkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
_set_nvmet_hostkey "${hostnqn}" "${new_hostkey}"
@@ -91,7 +90,7 @@ test() {
echo "Renew ctrl key on the controller"
- new_ctrlkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
+ new_ctrlkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
_set_nvmet_ctrlkey "${hostnqn}" "${new_ctrlkey}"
@@ -116,15 +115,15 @@ test() {
echo "${new_hostkey}" > "${hostkey_file}"
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
rand_io_size="$(_nvme_calc_rand_io_size 4m)"
_run_fio_rand_io --size="${rand_io_size}" --filename="/dev/${nvmedev}n1"
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/047 b/tests/nvme/047
index 6a7599bc2e91..b435dd3cecba 100755
--- a/tests/nvme/047
+++ b/tests/nvme/047
@@ -27,37 +27,36 @@ test() {
local loop_dev
local rand_io_size
local file_path="$TMPDIR/img"
- local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
loop_dev="$(losetup -f --show "${file_path}")"
- _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--nr-write-queues 1 || echo FAIL
- nvmedev=$(_find_nvme_dev "${subsys_name}")
+ nvmedev=$(_find_nvme_dev "${def_subsysnqn}")
rand_io_size="$(_nvme_calc_rand_io_size 4M)"
_run_fio_rand_io --filename="/dev/${nvmedev}n1" --size="${rand_io_size}"
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--nr-write-queues 1 \
--nr-poll-queues 1 || echo FAIL
_run_fio_rand_io --filename="/dev/${nvmedev}n1" --size="${rand_io_size}"
- _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
losetup -d "${loop_dev}"
diff --git a/tests/nvme/048 b/tests/nvme/048
index 6efcd7d6ab03..20d234e72621 100755
--- a/tests/nvme/048
+++ b/tests/nvme/048
@@ -85,8 +85,7 @@ test() {
_setup_nvmet
- local subsys_name="blktests-subsystem-1"
- local cfs_path="${NVMET_CFS}/subsystems/${subsys_name}"
+ local cfs_path="${NVMET_CFS}/subsystems/${def_subsysnqn}"
local file_path="${TMPDIR}/img"
local skipped=false
local hostnqn
@@ -98,34 +97,34 @@ test() {
truncate -s "${nvme_img_size}" "${file_path}"
- _create_nvmet_subsystem "${subsys_name}" "${file_path}" \
+ _create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"b92842df-a394-44b1-84a4-92ae7d112861"
port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _create_nvmet_host "${subsys_name}" "${hostnqn}"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
+ _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
if [[ -f "${cfs_path}/attr_qid_max" ]] ; then
- _nvme_connect_subsys "${nvme_trtype}" "${subsys_name}" \
+ _nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--hostnqn "${hostnqn}" \
--hostid "${hostid}" \
--keep-alive-tmo 1 \
--reconnect-delay 2
- if ! nvmf_wait_for_state "${subsys_name}" "live" ; then
+ if ! nvmf_wait_for_state "${def_subsysnqn}" "live" ; then
echo FAIL
else
- set_qid_max "${port}" "${subsys_name}" 1 || echo FAIL
- set_qid_max "${port}" "${subsys_name}" 2 || echo FAIL
+ set_qid_max "${port}" "${def_subsysnqn}" 1 || echo FAIL
+ set_qid_max "${port}" "${def_subsysnqn}" 2 || echo FAIL
fi
- _nvme_disconnect_subsys "${subsys_name}"
+ _nvme_disconnect_subsys "${def_subsysnqn}"
else
SKIP_REASONS+=("missing attr_qid_max feature")
skipped=true
fi
- _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
- _remove_nvmet_subsystem "${subsys_name}"
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
_remove_nvmet_host "${hostnqn}"
--
2.41.0
Commit acc408477e85 ("nvme/{041,042,043,044,045,048}: Use default
hostnqn and hostid") switched the test over to use the default
hostnqn. It missed the change to remove the local variable and
use the def_hostnqn/def_hostid directly.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/041 | 16 ++++++----------
tests/nvme/042 | 21 ++++++++-------------
tests/nvme/043 | 23 +++++++++--------------
tests/nvme/044 | 27 +++++++++++----------------
tests/nvme/045 | 23 +++++++++--------------
tests/nvme/048 | 12 ++++--------
6 files changed, 47 insertions(+), 75 deletions(-)
diff --git a/tests/nvme/041 b/tests/nvme/041
index fbceaa1cb2d5..4c553251f379 100755
--- a/tests/nvme/041
+++ b/tests/nvme/041
@@ -25,14 +25,10 @@ test() {
_setup_nvmet
local port
- local hostid
- local hostnqn
local file_path="${TMPDIR}/img"
local hostkey
local ctrldev
- hostid="${def_hostid}"
- hostnqn="${def_hostnqn}"
hostkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$hostkey" ] ; then
echo "nvme gen-dhchap-key failed"
@@ -45,21 +41,21 @@ test() {
"b92842df-a394-44b1-84a4-92ae7d112861"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${hostnqn}" "${hostkey}"
+ _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" "${hostkey}"
# Test unauthenticated connection (should fail)
echo "Test unauthenticated connection (should fail)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}"
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}"
_nvme_disconnect_subsys "${def_subsysnqn}"
# Test authenticated connection
echo "Test authenticated connection"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
@@ -71,7 +67,7 @@ test() {
_remove_nvmet_port "${port}"
- _remove_nvmet_host "${hostnqn}"
+ _remove_nvmet_host "${def_hostnqn}"
rm "${file_path}"
diff --git a/tests/nvme/042 b/tests/nvme/042
index 28d712e835df..866249ed598c 100755
--- a/tests/nvme/042
+++ b/tests/nvme/042
@@ -25,23 +25,18 @@ test() {
_setup_nvmet
local port
- local hostid
- local hostnqn
local file_path="${TMPDIR}/img"
local hmac
local key_len
local hostkey
local ctrldev
- hostid="${def_hostid}"
- hostnqn="${def_hostnqn}"
-
truncate -s "${nvme_img_size}" "${file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${hostnqn}"
+ _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
for hmac in 0 1 2 3; do
echo "Testing hmac ${hmac}"
@@ -50,11 +45,11 @@ test() {
echo "couldn't generate host key for hmac ${hmac}"
return 1
fi
- _set_nvmet_hostkey "${hostnqn}" "${hostkey}"
+ _set_nvmet_hostkey "${def_hostnqn}" "${hostkey}"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
@@ -68,11 +63,11 @@ test() {
echo "couldn't generate host key for length ${key_len}"
return 1
fi
- _set_nvmet_hostkey "${hostnqn}" "${hostkey}"
+ _set_nvmet_hostkey "${def_hostnqn}" "${hostkey}"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
@@ -85,7 +80,7 @@ test() {
_remove_nvmet_port "${port}"
- _remove_nvmet_host "${hostnqn}"
+ _remove_nvmet_host "${def_hostnqn}"
rm "${file_path}"
diff --git a/tests/nvme/043 b/tests/nvme/043
index 3dc543fd55d3..5569a7a58ad5 100755
--- a/tests/nvme/043
+++ b/tests/nvme/043
@@ -26,18 +26,13 @@ test() {
_setup_nvmet
local port
- local subsys_name="blktests-subsystem-1"
- local hostid
- local hostnqn
local file_path="${TMPDIR}/img"
local hash
local dhgroup
local hostkey
local ctrldev
- hostid="${def_hostid}"
- hostnqn="${def_hostnqn}"
- hostkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
+ hostkey="$(nvme gen-dhchap-key -n ${def_hostnqn} 2> /dev/null)"
if [ -z "$hostkey" ] ; then
echo "nvme gen-dhchap-key failed"
return 1
@@ -48,17 +43,17 @@ test() {
_create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${hostnqn}" "${hostkey}"
+ _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" "${hostkey}"
for hash in "hmac(sha256)" "hmac(sha384)" "hmac(sha512)" ; do
echo "Testing hash ${hash}"
- _set_nvmet_hash "${hostnqn}" "${hash}"
+ _set_nvmet_hash "${def_hostnqn}" "${hash}"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
@@ -70,11 +65,11 @@ test() {
echo "Testing DH group ${dhgroup}"
- _set_nvmet_dhgroup "${hostnqn}" "${dhgroup}"
+ _set_nvmet_dhgroup "${def_hostnqn}" "${dhgroup}"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
@@ -87,7 +82,7 @@ test() {
_remove_nvmet_port "${port}"
- _remove_nvmet_host "${hostnqn}"
+ _remove_nvmet_host "${def_hostnqn}"
rm "${file_path}"
diff --git a/tests/nvme/044 b/tests/nvme/044
index 608a086a0864..6c2cb602313c 100755
--- a/tests/nvme/044
+++ b/tests/nvme/044
@@ -26,16 +26,11 @@ test() {
_setup_nvmet
local port
- local hostid
- local hostnqn
local file_path="${TMPDIR}/img"
local hostkey
local ctrlkey
local ctrldev
- hostid="${def_hostid}"
- hostnqn="${def_hostnqn}"
-
hostkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$hostkey" ] ; then
echo "failed to generate host key"
@@ -53,16 +48,16 @@ test() {
_create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${hostnqn}" \
+ _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" \
"${hostkey}" "${ctrlkey}"
- _set_nvmet_dhgroup "${hostnqn}" "ffdhe2048"
+ _set_nvmet_dhgroup "${def_hostnqn}" "ffdhe2048"
# Step 1: Connect with host authentication only
echo "Test host authentication"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}"
udevadm settle
@@ -73,8 +68,8 @@ test() {
# and invalid ctrl authentication
echo "Test invalid ctrl authentication (should fail)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}" \
--dhchap-ctrl-secret "${hostkey}"
@@ -86,8 +81,8 @@ test() {
# and valid ctrl authentication
echo "Test valid ctrl authentication"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}" \
--dhchap-ctrl-secret "${ctrlkey}"
@@ -100,8 +95,8 @@ test() {
echo "Test invalid ctrl key (should fail)"
invkey="DHHC-1:00:Jc/My1o0qtLCWRp+sHhAVafdfaS7YQOMYhk9zSmlatobqB8C:"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}" \
--dhchap-ctrl-secret "${invkey}"
@@ -114,7 +109,7 @@ test() {
_remove_nvmet_port "${port}"
- _remove_nvmet_host "${hostnqn}"
+ _remove_nvmet_host "${def_hostnqn}"
rm "${file_path}"
diff --git a/tests/nvme/045 b/tests/nvme/045
index b8d886aaf9e8..a936e7fb661f 100755
--- a/tests/nvme/045
+++ b/tests/nvme/045
@@ -27,8 +27,6 @@ test() {
_setup_nvmet
local port
- local hostid
- local hostnqn
local file_path="${TMPDIR}/img"
local hostkey
local new_hostkey
@@ -37,9 +35,6 @@ test() {
local ctrldev
local rand_io_size
- hostid="${def_hostid}"
- hostnqn="${def_hostnqn}"
-
hostkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
if [ -z "$hostkey" ] ; then
echo "failed to generate host key"
@@ -57,13 +52,13 @@ test() {
_create_nvmet_subsystem "${def_subsysnqn}" "${file_path}"
port="$(_create_nvmet_port "${nvme_trtype}")"
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${hostnqn}" "${hostkey}" "${ctrlkey}"
+ _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" "${hostkey}" "${ctrlkey}"
- _set_nvmet_dhgroup "${hostnqn}" "ffdhe2048"
+ _set_nvmet_dhgroup "${def_hostnqn}" "ffdhe2048"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--dhchap-secret "${hostkey}" \
--dhchap-ctrl-secret "${ctrlkey}"
@@ -82,7 +77,7 @@ test() {
new_hostkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
- _set_nvmet_hostkey "${hostnqn}" "${new_hostkey}"
+ _set_nvmet_hostkey "${def_hostnqn}" "${new_hostkey}"
echo "Re-authenticate with new host key"
@@ -92,7 +87,7 @@ test() {
new_ctrlkey="$(nvme gen-dhchap-key -n ${def_subsysnqn} 2> /dev/null)"
- _set_nvmet_ctrlkey "${hostnqn}" "${new_ctrlkey}"
+ _set_nvmet_ctrlkey "${def_hostnqn}" "${new_ctrlkey}"
echo "Re-authenticate with new ctrl key"
@@ -101,7 +96,7 @@ test() {
echo "Change DH group to ffdhe8192"
- _set_nvmet_dhgroup "${hostnqn}" "ffdhe8192"
+ _set_nvmet_dhgroup "${def_hostnqn}" "ffdhe8192"
echo "Re-authenticate with changed DH group"
@@ -109,7 +104,7 @@ test() {
echo "Change hash to hmac(sha512)"
- _set_nvmet_hash "${hostnqn}" "hmac(sha512)"
+ _set_nvmet_hash "${def_hostnqn}" "hmac(sha512)"
echo "Re-authenticate with changed hash"
@@ -127,7 +122,7 @@ test() {
_remove_nvmet_port "${port}"
- _remove_nvmet_host "${hostnqn}"
+ _remove_nvmet_host "${def_hostnqn}"
rm "${file_path}"
diff --git a/tests/nvme/048 b/tests/nvme/048
index 20d234e72621..f9a19b1e655e 100755
--- a/tests/nvme/048
+++ b/tests/nvme/048
@@ -88,25 +88,21 @@ test() {
local cfs_path="${NVMET_CFS}/subsystems/${def_subsysnqn}"
local file_path="${TMPDIR}/img"
local skipped=false
- local hostnqn
- local hostid
local port
- hostid="${def_hostid}"
- hostnqn="${def_hostnqn}"
-
truncate -s "${nvme_img_size}" "${file_path}"
_create_nvmet_subsystem "${def_subsysnqn}" "${file_path}" \
"b92842df-a394-44b1-84a4-92ae7d112861"
port="$(_create_nvmet_port "${nvme_trtype}")"
+
_add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
_create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
if [[ -f "${cfs_path}/attr_qid_max" ]] ; then
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
- --hostnqn "${hostnqn}" \
- --hostid "${hostid}" \
+ --hostnqn "${def_hostnqn}" \
+ --hostid "${def_hostid}" \
--keep-alive-tmo 1 \
--reconnect-delay 2
@@ -126,7 +122,7 @@ test() {
_remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
_remove_nvmet_subsystem "${def_subsysnqn}"
_remove_nvmet_port "${port}"
- _remove_nvmet_host "${hostnqn}"
+ _remove_nvmet_host "${def_hostnqn}"
rm "${file_path}"
--
2.41.0
This unifies all the tests preamble code section.
Reorganize all tests to start with printing the test name, then
the setting nvmet and finally followed by the variable declarations.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/006 | 4 ++--
tests/nvme/007 | 4 ++--
tests/nvme/016 | 4 ++--
tests/nvme/017 | 4 ++--
tests/nvme/030 | 8 ++++----
tests/nvme/031 | 8 ++++----
tests/nvme/033 | 7 ++++---
tests/nvme/034 | 7 ++++---
tests/nvme/035 | 7 ++++---
tests/nvme/036 | 7 ++++---
tests/nvme/037 | 8 ++++----
tests/nvme/038 | 6 +++---
tests/nvme/039 | 4 ++--
tests/nvme/040 | 7 ++++---
tests/nvme/041 | 8 ++++----
tests/nvme/042 | 8 ++++----
tests/nvme/043 | 8 ++++----
tests/nvme/044 | 8 ++++----
tests/nvme/045 | 8 ++++----
tests/nvme/048 | 8 ++++----
20 files changed, 69 insertions(+), 64 deletions(-)
diff --git a/tests/nvme/006 b/tests/nvme/006
index ea0db93791a7..b44c56b6a25d 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -18,12 +18,12 @@ requires() {
test() {
echo "Running ${TEST_NAME}"
+ _setup_nvmet
+
local port
local loop_dev
local subsys_name="blktests-subsystem-1"
- _setup_nvmet
-
truncate -s "${nvme_img_size}" "$TMPDIR/img"
loop_dev="$(losetup -f --show "$TMPDIR/img")"
diff --git a/tests/nvme/007 b/tests/nvme/007
index 243a79f5a254..112432df7a9d 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -17,12 +17,12 @@ requires() {
test() {
echo "Running ${TEST_NAME}"
+ _setup_nvmet
+
local port
local file_path
local subsys_name="blktests-subsystem-1"
- _setup_nvmet
-
file_path="${TMPDIR}/img"
truncate -s "${nvme_img_size}" "${file_path}"
diff --git a/tests/nvme/016 b/tests/nvme/016
index f617cf103900..cac0c0509aca 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -16,13 +16,13 @@ requires() {
test() {
echo "Running ${TEST_NAME}"
+ _setup_nvmet
+
local port
local iterations="${nvme_num_iter}"
local loop_dev
local subsys_nqn="blktests-subsystem-1"
- _setup_nvmet
-
loop_dev="$(losetup -f)"
local genctr=1
diff --git a/tests/nvme/017 b/tests/nvme/017
index 3dbb7c174b56..429a25e8e011 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -16,13 +16,13 @@ requires() {
test() {
echo "Running ${TEST_NAME}"
+ _setup_nvmet
+
local port
local file_path
local iterations="${nvme_num_iter}"
local subsys_name="blktests-subsystem-1"
- _setup_nvmet
-
file_path="${TMPDIR}/img"
truncate -s "${nvme_img_size}" "${file_path}"
diff --git a/tests/nvme/030 b/tests/nvme/030
index cfcdcbe6be23..a0b999cace94 100755
--- a/tests/nvme/030
+++ b/tests/nvme/030
@@ -16,14 +16,14 @@ requires() {
}
test() {
- local port
- local genctr
- local subsys="blktests-subsystem-"
-
echo "Running ${TEST_NAME}"
_setup_nvmet
+ local port
+ local genctr
+ local subsys="blktests-subsystem-"
+
port="$(_create_nvmet_port "${nvme_trtype}")"
_create_nvmet_subsystem "${subsys}1" "$(losetup -f)"
diff --git a/tests/nvme/031 b/tests/nvme/031
index e70898819a86..27b08e96dd0b 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -24,15 +24,15 @@ requires() {
}
test() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local subsys="blktests-subsystem-"
local iterations=10
local loop_dev
local port
- echo "Running ${TEST_NAME}"
-
- _setup_nvmet
-
truncate -s "${nvme_img_size}" "$TMPDIR/img"
loop_dev="$(losetup -f --show "$TMPDIR/img")"
diff --git a/tests/nvme/033 b/tests/nvme/033
index 90aee817de5d..5a4fac03bea0 100755
--- a/tests/nvme/033
+++ b/tests/nvme/033
@@ -45,13 +45,14 @@ compare_dev_info() {
}
test_device() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local subsys="blktests-subsystem-1"
local nsdev
local port
- echo "Running ${TEST_NAME}"
-
- _setup_nvmet
port=$(_nvmet_passthru_target_setup "${subsys}")
nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${subsys}")
diff --git a/tests/nvme/034 b/tests/nvme/034
index e0ede717c373..334b2525d1b6 100755
--- a/tests/nvme/034
+++ b/tests/nvme/034
@@ -15,14 +15,15 @@ requires() {
}
test_device() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local subsys="blktests-subsystem-1"
local ctrldev
local nsdev
local port
- echo "Running ${TEST_NAME}"
-
- _setup_nvmet
port=$(_nvmet_passthru_target_setup "${subsys}")
nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${subsys}")
diff --git a/tests/nvme/035 b/tests/nvme/035
index 0896f7bb578d..68a9b608920e 100755
--- a/tests/nvme/035
+++ b/tests/nvme/035
@@ -21,14 +21,15 @@ device_requires() {
}
test_device() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local subsys="blktests-subsystem-1"
local ctrldev
local nsdev
local port
- echo "Running ${TEST_NAME}"
-
- _setup_nvmet
port=$(_nvmet_passthru_target_setup "${subsys}")
nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${subsys}")
diff --git a/tests/nvme/036 b/tests/nvme/036
index 8218c6538dfd..c3fc5d4a948d 100755
--- a/tests/nvme/036
+++ b/tests/nvme/036
@@ -14,13 +14,14 @@ requires() {
}
test_device() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local subsys="blktests-subsystem-1"
local ctrldev
local port
- echo "Running ${TEST_NAME}"
-
- _setup_nvmet
port=$(_nvmet_passthru_target_setup "${subsys}")
nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${subsys}")
diff --git a/tests/nvme/037 b/tests/nvme/037
index fc6c21343652..5a78444b7e78 100755
--- a/tests/nvme/037
+++ b/tests/nvme/037
@@ -13,15 +13,15 @@ requires() {
}
test_device() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local subsys="blktests-subsystem-"
local iterations=10
local ctrldev
local port
- echo "Running ${TEST_NAME}"
-
- _setup_nvmet
-
for ((i = 0; i < iterations; i++)); do
port=$(_nvmet_passthru_target_setup "${subsys}${i}")
nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" \
diff --git a/tests/nvme/038 b/tests/nvme/038
index 24f02d4ad4d1..5af28da03c36 100755
--- a/tests/nvme/038
+++ b/tests/nvme/038
@@ -19,13 +19,13 @@ requires() {
}
test() {
- local subsys_path="${NVMET_CFS}/subsystems/blktests-subsystem-1"
- local port
-
echo "Running ${TEST_NAME}"
_setup_nvmet
+ local subsys_path="${NVMET_CFS}/subsystems/blktests-subsystem-1"
+ local port
+
mkdir -p "${subsys_path}"
rmdir "${subsys_path}"
diff --git a/tests/nvme/039 b/tests/nvme/039
index f327b54a8d00..73b53d0b949c 100755
--- a/tests/nvme/039
+++ b/tests/nvme/039
@@ -131,12 +131,12 @@ inject_invalid_admin_cmd()
}
test_device() {
+ echo "Running ${TEST_NAME}"
+
local nvme_verbose_errors
local ns_dev
local ctrl_dev
- echo "Running ${TEST_NAME}"
-
if _check_kernel_option NVME_VERBOSE_ERRORS; then
nvme_verbose_errors=true
else
diff --git a/tests/nvme/040 b/tests/nvme/040
index 688a0939a376..3b76753132f3 100755
--- a/tests/nvme/040
+++ b/tests/nvme/040
@@ -17,6 +17,10 @@ requires() {
}
test() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local subsys="blktests-subsystem-1"
local file_path="${TMPDIR}/img"
local port
@@ -24,9 +28,6 @@ test() {
local nvmedev
local fio_pid
- echo "Running ${TEST_NAME}"
-
- _setup_nvmet
truncate -s "${nvme_img_size}" "${file_path}"
loop_dev="$(losetup -f --show "${file_path}")"
diff --git a/tests/nvme/041 b/tests/nvme/041
index 5b04b99b128e..d8937915d622 100755
--- a/tests/nvme/041
+++ b/tests/nvme/041
@@ -20,6 +20,10 @@ requires() {
test() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local port
local subsys_name="blktests-subsystem-1"
local hostid
@@ -28,8 +32,6 @@ test() {
local hostkey
local ctrldev
- echo "Running ${TEST_NAME}"
-
hostid="${def_hostid}"
hostnqn="${def_hostnqn}"
hostkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
@@ -38,8 +40,6 @@ test() {
return 1
fi
- _setup_nvmet
-
truncate -s "${nvme_img_size}" "${file_path}"
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
diff --git a/tests/nvme/042 b/tests/nvme/042
index 8df5ed37aacc..af291cb33a04 100755
--- a/tests/nvme/042
+++ b/tests/nvme/042
@@ -20,6 +20,10 @@ requires() {
test() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local port
local subsys_name="blktests-subsystem-1"
local hostid
@@ -30,13 +34,9 @@ test() {
local hostkey
local ctrldev
- echo "Running ${TEST_NAME}"
-
hostid="${def_hostid}"
hostnqn="${def_hostnqn}"
- _setup_nvmet
-
truncate -s "${nvme_img_size}" "${file_path}"
_create_nvmet_subsystem "${subsys_name}" "${file_path}"
diff --git a/tests/nvme/043 b/tests/nvme/043
index 8f4b783a02ff..4a37f91e50c3 100755
--- a/tests/nvme/043
+++ b/tests/nvme/043
@@ -21,6 +21,10 @@ requires() {
test() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local port
local subsys_name="blktests-subsystem-1"
local hostid
@@ -31,8 +35,6 @@ test() {
local hostkey
local ctrldev
- echo "Running ${TEST_NAME}"
-
hostid="${def_hostid}"
hostnqn="${def_hostnqn}"
hostkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
@@ -41,8 +43,6 @@ test() {
return 1
fi
- _setup_nvmet
-
truncate -s "${nvme_img_size}" "${file_path}"
_create_nvmet_subsystem "${subsys_name}" "${file_path}"
diff --git a/tests/nvme/044 b/tests/nvme/044
index fca0897af27b..27cb343f5ea7 100755
--- a/tests/nvme/044
+++ b/tests/nvme/044
@@ -21,6 +21,10 @@ requires() {
test() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local port
local subsys_name="blktests-subsystem-1"
local hostid
@@ -30,8 +34,6 @@ test() {
local ctrlkey
local ctrldev
- echo "Running ${TEST_NAME}"
-
hostid="${def_hostid}"
hostnqn="${def_hostnqn}"
@@ -47,8 +49,6 @@ test() {
return 1
fi
- _setup_nvmet
-
truncate -s "${nvme_img_size}" "${file_path}"
_create_nvmet_subsystem "${subsys_name}" "${file_path}"
diff --git a/tests/nvme/045 b/tests/nvme/045
index eca629a18691..005d62d4f886 100755
--- a/tests/nvme/045
+++ b/tests/nvme/045
@@ -22,6 +22,10 @@ requires() {
test() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local port
local subsys_name="blktests-subsystem-1"
local hostid
@@ -34,8 +38,6 @@ test() {
local ctrldev
local rand_io_size
- echo "Running ${TEST_NAME}"
-
hostid="${def_hostid}"
hostnqn="${def_hostnqn}"
@@ -51,8 +53,6 @@ test() {
return 1
fi
- _setup_nvmet
-
truncate -s "${nvme_img_size}" "${file_path}"
_create_nvmet_subsystem "${subsys_name}" "${file_path}"
diff --git a/tests/nvme/048 b/tests/nvme/048
index a6ebb8927865..6efcd7d6ab03 100755
--- a/tests/nvme/048
+++ b/tests/nvme/048
@@ -81,6 +81,10 @@ set_qid_max() {
}
test() {
+ echo "Running ${TEST_NAME}"
+
+ _setup_nvmet
+
local subsys_name="blktests-subsystem-1"
local cfs_path="${NVMET_CFS}/subsystems/${subsys_name}"
local file_path="${TMPDIR}/img"
@@ -89,10 +93,6 @@ test() {
local hostid
local port
- echo "Running ${TEST_NAME}"
-
- _setup_nvmet
-
hostid="${def_hostid}"
hostnqn="${def_hostnqn}"
--
2.41.0
Group all variable declarations together at the beginning of the
function. Many of the nvme tests do this but not all. Thus make these
tests use the same style. This allows to spot the odd balls in the
refactoring of the tests.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/003 | 3 ++-
tests/nvme/004 | 3 ++-
tests/nvme/005 | 5 +++--
tests/nvme/013 | 1 -
tests/nvme/046 | 1 +
tests/nvme/049 | 1 +
6 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/tests/nvme/003 b/tests/nvme/003
index 6604012d2068..aa26abf8d8b3 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -22,10 +22,11 @@ test() {
_setup_nvmet
+ local loop_dev
local port
+
port="$(_create_nvmet_port "${nvme_trtype}")"
- local loop_dev
loop_dev="$(losetup -f)"
_create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}"
diff --git a/tests/nvme/004 b/tests/nvme/004
index cab98ff44326..1e5c2b8b3e87 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -23,11 +23,12 @@ test() {
_setup_nvmet
local port
+ local loop_dev
+
port="$(_create_nvmet_port "${nvme_trtype}")"
truncate -s "${nvme_img_size}" "$TMPDIR/img"
- local loop_dev
loop_dev="$(losetup -f --show "$TMPDIR/img")"
_create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}" \
diff --git a/tests/nvme/005 b/tests/nvme/005
index 8e15a13f3794..836854086822 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -22,11 +22,13 @@ test() {
_setup_nvmet
local port
+ local loop_dev
+ local nvmedev
+
port="$(_create_nvmet_port "${nvme_trtype}")"
truncate -s "${nvme_img_size}" "$TMPDIR/img"
- local loop_dev
loop_dev="$(losetup -f --show "$TMPDIR/img")"
_create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}" \
@@ -35,7 +37,6 @@ test() {
_nvme_connect_subsys "${nvme_trtype}" blktests-subsystem-1
- local nvmedev
nvmedev=$(_find_nvme_dev "blktests-subsystem-1")
udevadm settle
diff --git a/tests/nvme/013 b/tests/nvme/013
index 14e646a19c47..2be8681616d1 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -26,7 +26,6 @@ test() {
local port
local nvmedev
local file_path="${TMPDIR}/img"
-
local subsys_name="blktests-subsystem-1"
truncate -s "${nvme_img_size}" "${file_path}"
diff --git a/tests/nvme/046 b/tests/nvme/046
index b37b9e98a559..942f25206c17 100755
--- a/tests/nvme/046
+++ b/tests/nvme/046
@@ -16,6 +16,7 @@ requires() {
test_device() {
echo "Running ${TEST_NAME}"
+
local ngdev=${TEST_DEV/nvme/ng}
local perm nsid
diff --git a/tests/nvme/049 b/tests/nvme/049
index f72862c6426d..599ab58d7a29 100755
--- a/tests/nvme/049
+++ b/tests/nvme/049
@@ -17,6 +17,7 @@ requires() {
test_device() {
echo "Running ${TEST_NAME}"
+
local ngdev=${TEST_DEV/nvme/ng}
local common_args=(
--size=1M
--
2.41.0
Almost all fabric tests have the identically code for
setting up and cleaning up the target side. Introduce
two new helpers.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/003 | 13 +++--------
tests/nvme/004 | 20 +++--------------
tests/nvme/005 | 19 ++--------------
tests/nvme/006 | 18 ++-------------
tests/nvme/007 | 13 ++---------
tests/nvme/008 | 20 ++---------------
tests/nvme/009 | 15 ++-----------
tests/nvme/010 | 20 ++---------------
tests/nvme/011 | 15 ++-----------
tests/nvme/012 | 20 ++---------------
tests/nvme/013 | 15 ++-----------
tests/nvme/014 | 20 ++---------------
tests/nvme/015 | 15 ++-----------
tests/nvme/018 | 15 ++-----------
tests/nvme/019 | 20 ++---------------
tests/nvme/020 | 15 ++-----------
tests/nvme/021 | 15 ++-----------
tests/nvme/022 | 15 ++-----------
tests/nvme/023 | 20 ++---------------
tests/nvme/024 | 15 ++-----------
tests/nvme/025 | 15 ++-----------
tests/nvme/026 | 15 ++-----------
tests/nvme/027 | 16 +++-----------
tests/nvme/028 | 16 +++-----------
tests/nvme/029 | 20 ++---------------
tests/nvme/040 | 18 ++-------------
tests/nvme/041 | 17 ++------------
tests/nvme/042 | 16 ++------------
tests/nvme/043 | 16 ++------------
tests/nvme/044 | 18 +++------------
tests/nvme/045 | 17 +++-----------
tests/nvme/047 | 20 ++---------------
tests/nvme/048 | 16 ++------------
tests/nvme/rc | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++
34 files changed, 132 insertions(+), 486 deletions(-)
diff --git a/tests/nvme/003 b/tests/nvme/003
index 71b82ce758a3..54e5fe651c9a 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -22,15 +22,9 @@ test() {
_setup_nvmet
- local loop_dev
local port
- port="$(_create_nvmet_port "${nvme_trtype}")"
-
- loop_dev="$(losetup -f)"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" nqn.2014-08.org.nvmexpress.discovery
@@ -46,9 +40,8 @@ test() {
fi
_nvme_disconnect_subsys nqn.2014-08.org.nvmexpress.discovery
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
+
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/004 b/tests/nvme/004
index 697c758d3059..68c7619c7fb5 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -23,18 +23,8 @@ test() {
_setup_nvmet
local port
- local loop_dev
- port="$(_create_nvmet_port "${nvme_trtype}")"
-
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -44,12 +34,8 @@ test() {
cat "/sys/block/${nvmedev}n1/wwid"
_nvme_disconnect_subsys ${def_subsysnqn}
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
- losetup -d "$loop_dev"
- rm "${def_file_path}"
+
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/005 b/tests/nvme/005
index 6646b826ecfa..7dadd8b58dee 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -22,19 +22,9 @@ test() {
_setup_nvmet
local port
- local loop_dev
local nvmedev
- port="$(_create_nvmet_port "${nvme_trtype}")"
-
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -45,13 +35,8 @@ test() {
echo 1 > "/sys/class/nvme/${nvmedev}/reset_controller"
_nvme_disconnect_ctrl "${nvmedev}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_host "${def_hostnqn}"
- losetup -d "$loop_dev"
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/006 b/tests/nvme/006
index 910204aaeb90..8507e24b5ec5 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -21,24 +21,10 @@ test() {
_setup_nvmet
local port
- local loop_dev
- truncate -s "${nvme_img_size}" "${def_file_path}"
+ port="$(_nvmet_target_setup --blkdev=device)"
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
-
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
-
- losetup -d "$loop_dev"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/007 b/tests/nvme/007
index db00bdcc2d08..255f31e82bc4 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -21,18 +21,9 @@ test() {
local port
- truncate -s "${nvme_img_size}" "${def_file_path}"
+ port="$(_nvmet_target_setup --blkdev=file)"
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
-
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/008 b/tests/nvme/008
index 3921fc6992b2..48c51c9fb288 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -22,17 +22,8 @@ test() {
local port
local nvmedev
- local loop_dev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -44,14 +35,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- losetup -d "${loop_dev}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/009 b/tests/nvme/009
index aac3c1e0f642..5b41c81ee876 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -22,13 +22,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -40,12 +34,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/010 b/tests/nvme/010
index 19bb7f3fc7a7..02bf94eb332f 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -22,17 +22,8 @@ test() {
local port
local nvmedev
- local loop_dev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -45,14 +36,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- losetup -d "${loop_dev}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/011 b/tests/nvme/011
index 0e54c2588bc8..93748c406e83 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -23,13 +23,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -42,12 +36,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/012 b/tests/nvme/012
index c6b82c821bf2..0d39596608b5 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -26,17 +26,8 @@ test() {
local port
local nvmedev
- local loop_dev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -48,14 +39,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- losetup -d "${loop_dev}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/013 b/tests/nvme/013
index 441db7477d75..b0480e32fbbf 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -26,13 +26,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -44,12 +38,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/014 b/tests/nvme/014
index 3656f9399687..77fe64aa39e6 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -22,20 +22,11 @@ test() {
local port
local nvmedev
- local loop_dev
local size
local bs
local count
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -54,14 +45,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- losetup -d "${loop_dev}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/015 b/tests/nvme/015
index bc04e39c628c..df36d32e4891 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -26,13 +26,7 @@ test() {
local bs
local count
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -51,12 +45,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/018 b/tests/nvme/018
index 68729c3cb070..9ea9ebc8648a 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -24,13 +24,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -48,12 +42,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/019 b/tests/nvme/019
index 33a25d52e9fd..4cb248f66bc3 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -22,19 +22,10 @@ test() {
local port
local nvmedev
- local loop_dev
local nblk_range="10,10,10,10,10,10,10,10,10,10"
local sblk_range="100,200,300,400,500,600,700,800,900,1000"
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -46,14 +37,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- losetup -d "${loop_dev}"
-
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/020 b/tests/nvme/020
index f436cdc8b262..304a2c3ffc50 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -24,13 +24,7 @@ test() {
local nblk_range="10,10,10,10,10,10,10,10,10,10"
local sblk_range="100,200,300,400,500,600,700,800,900,1000"
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -42,12 +36,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/021 b/tests/nvme/021
index 5043fe4916be..c5c578d0a73b 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -23,13 +23,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -43,12 +37,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/022 b/tests/nvme/022
index 8b6f610c4894..2b270042ab43 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -23,13 +23,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -43,12 +37,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/023 b/tests/nvme/023
index 90af0338e81f..d527b7fff7da 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -22,17 +22,8 @@ test() {
local port
local nvmedev
- local loop_dev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -46,14 +37,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- losetup -d "${loop_dev}"
-
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/024 b/tests/nvme/024
index 7a89ddd79fd9..7ba8406dba57 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -23,13 +23,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -42,12 +36,7 @@ test() {
fi
_nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/025 b/tests/nvme/025
index 90f214eff6c8..7f9df92fe301 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -23,13 +23,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -43,12 +37,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/026 b/tests/nvme/026
index ec352acaa489..9ed929d89708 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -23,13 +23,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -43,12 +37,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/027 b/tests/nvme/027
index 339f7605a9f5..bf1a55ca982b 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -23,13 +23,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -40,14 +34,10 @@ test() {
if ! nvme ns-rescan "/dev/${nvmedev}" >> "$FULL" 2>&1; then
echo "ERROR: ns-rescan failed"
fi
- _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/028 b/tests/nvme/028
index 7f387eb337f6..783433c1ece3 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -23,13 +23,7 @@ test() {
local port
local nvmedev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -40,14 +34,10 @@ test() {
if ! nvme list-subsys 2>> "$FULL" | grep -q "${nvme_trtype}"; then
echo "ERROR: list-subsys"
fi
- _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
+ _nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/029 b/tests/nvme/029
index 461e6c6c4454..7dda6ddd96df 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -55,17 +55,8 @@ test() {
local port
local nvmedev
- local loop_dev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
@@ -83,14 +74,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- losetup -d "${loop_dev}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/040 b/tests/nvme/040
index 1a9be5c9342c..09f9bddf92c0 100755
--- a/tests/nvme/040
+++ b/tests/nvme/040
@@ -22,17 +22,10 @@ test() {
_setup_nvmet
local port
- local loop_dev
local nvmedev
local fio_pid
- truncate -s "${nvme_img_size}" "${def_file_path}"
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}"
udevadm settle
@@ -55,14 +48,7 @@ test() {
{ kill "${fio_pid}"; wait; } &> /dev/null
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- losetup -d "${loop_dev}"
-
- rm -f "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/041 b/tests/nvme/041
index cb2766619b0e..e690c680c971 100755
--- a/tests/nvme/041
+++ b/tests/nvme/041
@@ -34,13 +34,7 @@ test() {
return 1
fi
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" "${hostkey}"
+ port="$(_nvmet_target_setup --blkdev=file --hostkey "${hostkey}")"
# Test unauthenticated connection (should fail)
echo "Test unauthenticated connection (should fail)"
@@ -61,14 +55,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
-
- _remove_nvmet_port "${port}"
-
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/042 b/tests/nvme/042
index 9180fce17b4e..961d362c9b86 100755
--- a/tests/nvme/042
+++ b/tests/nvme/042
@@ -30,12 +30,7 @@ test() {
local hostkey
local ctrldev
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
for hmac in 0 1 2 3; do
echo "Testing hmac ${hmac}"
@@ -74,14 +69,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
done
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
-
- _remove_nvmet_port "${port}"
-
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/043 b/tests/nvme/043
index f08422949efb..47d07e3fa0c5 100755
--- a/tests/nvme/043
+++ b/tests/nvme/043
@@ -37,12 +37,7 @@ test() {
return 1
fi
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" "${hostkey}"
+ port="$(_nvmet_target_setup --blkdev=file --hostkey "${hostkey}")"
for hash in "hmac(sha256)" "hmac(sha384)" "hmac(sha512)" ; do
@@ -76,14 +71,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
done
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
-
- _remove_nvmet_port "${port}"
-
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/044 b/tests/nvme/044
index 5eb163db2c99..0d2fc1dd83c5 100755
--- a/tests/nvme/044
+++ b/tests/nvme/044
@@ -42,13 +42,8 @@ test() {
return 1
fi
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" \
- "${hostkey}" "${ctrlkey}"
+ port="$(_nvmet_target_setup --blkdev=file --ctrlkey "${ctrlkey}" \
+ --hostkey "${hostkey}")"
_set_nvmet_dhgroup "${def_hostnqn}" "ffdhe2048"
@@ -103,14 +98,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
-
- _remove_nvmet_port "${port}"
-
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/045 b/tests/nvme/045
index 8364d5ec3a2b..d17b4c54c6c3 100755
--- a/tests/nvme/045
+++ b/tests/nvme/045
@@ -46,12 +46,8 @@ test() {
return 1
fi
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" "${hostkey}" "${ctrlkey}"
+ port="$(_nvmet_target_setup --blkdev=file --ctrlkey "${ctrlkey}" \
+ --hostkey "${hostkey}")"
_set_nvmet_dhgroup "${def_hostnqn}" "ffdhe2048"
@@ -116,14 +112,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}"
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
-
- _remove_nvmet_port "${port}"
-
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/047 b/tests/nvme/047
index 1da24b5638a6..c0b64bd90eb6 100755
--- a/tests/nvme/047
+++ b/tests/nvme/047
@@ -24,18 +24,9 @@ test() {
local port
local nvmedev
- local loop_dev
local rand_io_size
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- loop_dev="$(losetup -f --show "${def_file_path}")"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${loop_dev}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=device)"
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
--nr-write-queues 1 || echo FAIL
@@ -55,14 +46,7 @@ test() {
_nvme_disconnect_subsys "${def_subsysnqn}" >> "$FULL" 2>&1
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- losetup -d "${loop_dev}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
echo "Test complete"
}
diff --git a/tests/nvme/048 b/tests/nvme/048
index 19234a5b3791..428add165dce 100755
--- a/tests/nvme/048
+++ b/tests/nvme/048
@@ -89,14 +89,7 @@ test() {
local skipped=false
local port
- truncate -s "${nvme_img_size}" "${def_file_path}"
-
- _create_nvmet_subsystem "${def_subsysnqn}" "${def_file_path}" \
- "${def_subsys_uuid}"
- port="$(_create_nvmet_port "${nvme_trtype}")"
-
- _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
- _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}"
+ port="$(_nvmet_target_setup --blkdev=file)"
if [[ -f "${cfs_path}/attr_qid_max" ]] ; then
_nvme_connect_subsys "${nvme_trtype}" "${def_subsysnqn}" \
@@ -118,12 +111,7 @@ test() {
skipped=true
fi
- _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
- _remove_nvmet_subsystem "${def_subsysnqn}"
- _remove_nvmet_port "${port}"
- _remove_nvmet_host "${def_hostnqn}"
-
- rm "${def_file_path}"
+ _nvmet_target_cleanup "${port}"
if [[ "${skipped}" = true ]] ; then
return 1
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 0000254da731..7a5a370f8a48 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -780,6 +780,66 @@ _find_nvme_passthru_loop_dev() {
echo "/dev/${dev}n${nsid}"
}
+_nvmet_target_setup() {
+ local blkdev_type="device"
+ local blkdev
+ local ctrlkey=""
+ local hostkey=""
+ local port
+
+ while [[ $# -gt 0 ]]; do
+ case $1 in
+ --blkdev)
+ blkdev_type="$2"
+ shift 2
+ ;;
+ --ctrlkey)
+ ctrlkey="$2"
+ shift 2
+ ;;
+ --hostkey)
+ hostkey="$2"
+ shift 2
+ ;;
+ *)
+ shift
+ ;;
+ esac
+ done
+
+ truncate -s "${nvme_img_size}" "${def_file_path}"
+ if [[ "${blkdev_type}" == "device" ]]; then
+ blkdev="$(losetup -f --show "${def_file_path}")"
+ else
+ blkdev="${def_file_path}"
+ fi
+
+ _create_nvmet_subsystem "${def_subsysnqn}" "${blkdev}" \
+ "${def_subsys_uuid}"
+ port="$(_create_nvmet_port "${nvme_trtype}")"
+ _add_nvmet_subsys_to_port "${port}" "${def_subsysnqn}"
+ _create_nvmet_host "${def_subsysnqn}" "${def_hostnqn}" \
+ "${hostkey}" "${ctrlkey}"
+
+ echo "${port}"
+}
+
+_nvmet_target_cleanup() {
+ local port=$1
+ local blkdev
+
+ _remove_nvmet_subsystem_from_port "${port}" "${def_subsysnqn}"
+ _remove_nvmet_subsystem "${def_subsysnqn}"
+ _remove_nvmet_port "${port}"
+ _remove_nvmet_host "${def_hostnqn}"
+
+ blkdev="$(losetup -l | awk '$6 == "'"${def_file_path}"'" { print $1 }')"
+ if [[ -n "${blkdev}" ]] ; then
+ losetup -d "${blkdev}"
+ fi
+ rm "${def_file_path}"
+}
+
_nvmet_passthru_target_setup() {
local subsys_name=$1
--
2.41.0
Add common subsystem nqn as global definition so that we can reuse it.
Signed-off-by: Daniel Wagner <[email protected]>
---
tests/nvme/rc | 1 +
1 file changed, 1 insertion(+)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 4f3a994d75ce..c11848b59c49 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -16,6 +16,7 @@ def_local_wwnn="0x10001100aa000002"
def_local_wwpn="0x20001100aa000002"
def_hostid="0f01fb42-9f7f-4856-b0b3-51e60b8de349"
def_hostnqn="nqn.2014-08.org.nvmexpress:uuid:${def_hostid}"
+def_subsysnqn="blktests-subsystem-1"
nvme_trtype=${nvme_trtype:-"loop"}
nvme_img_size=${nvme_img_size:-"1G"}
nvme_num_iter=${nvme_num_iter:-"1000"}
--
2.41.0
On Aug 10, 2023 / 13:13, Daniel Wagner wrote:
> Commit acc408477e85 ("nvme/{041,042,043,044,045,048}: Use default
> hostnqn and hostid") switched the test over to use the default
> hostnqn. It missed the change to remove the local variable and
> use the def_hostnqn/def_hostid directly.
>
> Signed-off-by: Daniel Wagner <[email protected]>
> ---
[...]
> diff --git a/tests/nvme/043 b/tests/nvme/043
> index 3dc543fd55d3..5569a7a58ad5 100755
> --- a/tests/nvme/043
> +++ b/tests/nvme/043
> @@ -26,18 +26,13 @@ test() {
> _setup_nvmet
>
> local port
> - local subsys_name="blktests-subsystem-1"
> - local hostid
> - local hostnqn
> local file_path="${TMPDIR}/img"
> local hash
> local dhgroup
> local hostkey
> local ctrldev
>
> - hostid="${def_hostid}"
> - hostnqn="${def_hostnqn}"
> - hostkey="$(nvme gen-dhchap-key -n ${subsys_name} 2> /dev/null)"
> + hostkey="$(nvme gen-dhchap-key -n ${def_hostnqn} 2> /dev/null)"
This part changes the -n option value from ${subsys_name} to ${def_hostnqn}.
According to "man nvme-gen-dhchap-key", this fix looks valid for me. It would be
the better to note it in the commit message for clarification, even though it is
a minor fix.
On Fri, Aug 11, 2023 at 06:16:45AM +0000, Shinichiro Kawasaki wrote:
> > So we could return the nvmedev from _nvme_connect_subsys() but I don't know if
> > this a good idea.
>
> IMO, it is a good idea to make _nvme_connect_subsys() return the device. The
> similar function _nvmet_passthru_target_connect() does that, so it is another
> small goodness to have consistency between the two.
Sure, I'll look into this when I remove the udev trigger filter code
again which resulted in this series. But let's get this series sorted
out first.
> > FWIW, it would also fix the current problem we face with
> > nvme/047 which seems to lack the second _find_nvme_dev() call.
>
> I posted the fix patch for the nvme/047 problem reflecting your comments. I hope
> that fix settled before further refactoring.
Yep, let's get the bug fix in first.
> It is a fun to see the much of the boiler plates go away with the
> series :)
Ineed, makes the test way smaller.
BTW, what do you think about removing nvme/006 and nvme/007? They are
basically doing nothing anymore except setting up a target with either
device or file backing. We exercise this code now in all the other
tests. So this is bit redundant IMO.
> Thanks. I provided two minor comments on the 5th patch and 10th patch. Other
> than that, this series looks good to me. Also I did another trial run, and
> saw no regression. Good.
I've updated the series accordingly. Let me run a quick test and then I
post the update.