This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel image
Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
booting flat and compressed kernel images. In case of Uboot, booting
Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful
in pre-silicon developent and testing because we can create back-door
HEX files for RAM on FPGAs from Image.
Signed-off-by: Anup Patel <[email protected]>
---
arch/riscv/Makefile | 15 ++++++++-
arch/riscv/boot/.gitignore | 2 ++
arch/riscv/boot/Makefile | 33 ++++++++++++++++++
arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++
arch/riscv/kernel/head.S | 10 ++++++
arch/riscv/kernel/vmlinux.lds.S | 2 +-
6 files changed, 120 insertions(+), 2 deletions(-)
create mode 100644 arch/riscv/boot/.gitignore
create mode 100644 arch/riscv/boot/Makefile
create mode 100644 arch/riscv/boot/install.sh
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index d10146197533..d117a60362eb 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -71,10 +71,23 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
# arch specific predefines for sparse
CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
+# Default target when executing plain make
+boot := arch/riscv/boot
+KBUILD_IMAGE := $(boot)/Image.gz
+
head-y := arch/riscv/kernel/head.o
core-y += arch/riscv/kernel/ arch/riscv/mm/
libs-y += arch/riscv/lib/
-all: vmlinux
+all: Image.gz
+
+Image: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+Image.%: Image
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+zinstall install:
+ $(Q)$(MAKE) $(build)=$(boot) $@
diff --git a/arch/riscv/boot/.gitignore b/arch/riscv/boot/.gitignore
new file mode 100644
index 000000000000..8dab0bb6ae66
--- /dev/null
+++ b/arch/riscv/boot/.gitignore
@@ -0,0 +1,2 @@
+Image
+Image.gz
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
new file mode 100644
index 000000000000..0990a9fdbe5d
--- /dev/null
+++ b/arch/riscv/boot/Makefile
@@ -0,0 +1,33 @@
+#
+# arch/riscv/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2018, Anup Patel.
+# Author: Anup Patel <[email protected]>
+#
+# Based on the ia64 and arm64 boot/Makefile.
+#
+
+OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+targets := Image
+
+$(obj)/Image: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/Image.gz: $(obj)/Image FORCE
+ $(call if_changed,gzip)
+
+install:
+ $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+ $(obj)/Image System.map "$(INSTALL_PATH)"
+
+zinstall:
+ $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+ $(obj)/Image.gz System.map "$(INSTALL_PATH)"
diff --git a/arch/riscv/boot/install.sh b/arch/riscv/boot/install.sh
new file mode 100644
index 000000000000..18c39159c0ff
--- /dev/null
+++ b/arch/riscv/boot/install.sh
@@ -0,0 +1,60 @@
+#!/bin/sh
+#
+# arch/riscv/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for the RISC-V Linux port
+#
+# Arguments:
+# $1 - kernel version
+# $2 - kernel image file
+# $3 - kernel map file
+# $4 - default install path (blank if root directory)
+#
+
+verify () {
+ if [ ! -f "$1" ]; then
+ echo "" 1>&2
+ echo " *** Missing file: $1" 1>&2
+ echo ' *** You need to run "make" before "make install".' 1>&2
+ echo "" 1>&2
+ exit 1
+ fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
+# User may have a custom install script
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+
+if [ "$(basename $2)" = "Image.gz" ]; then
+# Compressed install
+ echo "Installing compressed kernel"
+ base=vmlinuz
+else
+# Normal install
+ echo "Installing normal kernel"
+ base=vmlinux
+fi
+
+if [ -f $4/$base-$1 ]; then
+ mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+ mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 711190d473d4..fe884cd69abd 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -44,6 +44,16 @@ ENTRY(_start)
amoadd.w a3, a2, (a3)
bnez a3, .Lsecondary_start
+ /* Clear BSS for flat non-ELF images */
+ la a3, __bss_start
+ la a4, __bss_stop
+ ble a4, a3, clear_bss_done
+clear_bss:
+ REG_S zero, (a3)
+ add a3, a3, RISCV_SZPTR
+ blt a3, a4, clear_bss
+clear_bss_done:
+
/* Save hart ID and DTB physical address */
mv s0, a0
mv s1, a1
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index ece84991609c..65df1dfdc303 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -74,7 +74,7 @@ SECTIONS
*(.sbss*)
}
- BSS_SECTION(0, 0, 0)
+ BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
EXCEPTION_TABLE(0x10)
NOTES
--
2.17.1
On Sun, 11 Nov 2018 21:55:15 PST (-0800), [email protected] wrote:
> This patch extends Linux RISC-V build system to build and install:
> Image - Flat uncompressed kernel image
> Image.gz - Flat and GZip compressed kernel image
>
> Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
> booting flat and compressed kernel images. In case of Uboot, booting
> Image or Image.gz is achieved using bootm command.
>
> The flat and uncompressed kernel image (i.e. Image) is very useful
> in pre-silicon developent and testing because we can create back-door
> HEX files for RAM on FPGAs from Image.
>
> Signed-off-by: Anup Patel <[email protected]>
> ---
> arch/riscv/Makefile | 15 ++++++++-
> arch/riscv/boot/.gitignore | 2 ++
> arch/riscv/boot/Makefile | 33 ++++++++++++++++++
> arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++
> arch/riscv/kernel/head.S | 10 ++++++
> arch/riscv/kernel/vmlinux.lds.S | 2 +-
> 6 files changed, 120 insertions(+), 2 deletions(-)
> create mode 100644 arch/riscv/boot/.gitignore
> create mode 100644 arch/riscv/boot/Makefile
> create mode 100644 arch/riscv/boot/install.sh
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index d10146197533..d117a60362eb 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -71,10 +71,23 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
> # arch specific predefines for sparse
> CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>
> +# Default target when executing plain make
> +boot := arch/riscv/boot
> +KBUILD_IMAGE := $(boot)/Image.gz
> +
> head-y := arch/riscv/kernel/head.o
>
> core-y += arch/riscv/kernel/ arch/riscv/mm/
>
> libs-y += arch/riscv/lib/
>
> -all: vmlinux
> +all: Image.gz
> +
> +Image: vmlinux
> + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
> +
> +Image.%: Image
> + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
> +
> +zinstall install:
> + $(Q)$(MAKE) $(build)=$(boot) $@
> diff --git a/arch/riscv/boot/.gitignore b/arch/riscv/boot/.gitignore
> new file mode 100644
> index 000000000000..8dab0bb6ae66
> --- /dev/null
> +++ b/arch/riscv/boot/.gitignore
> @@ -0,0 +1,2 @@
> +Image
> +Image.gz
> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> new file mode 100644
> index 000000000000..0990a9fdbe5d
> --- /dev/null
> +++ b/arch/riscv/boot/Makefile
> @@ -0,0 +1,33 @@
> +#
> +# arch/riscv/boot/Makefile
> +#
> +# This file is included by the global makefile so that you can add your own
> +# architecture-specific flags and dependencies.
> +#
> +# This file is subject to the terms and conditions of the GNU General Public
> +# License. See the file "COPYING" in the main directory of this archive
> +# for more details.
> +#
> +# Copyright (C) 2018, Anup Patel.
> +# Author: Anup Patel <[email protected]>
> +#
> +# Based on the ia64 and arm64 boot/Makefile.
> +#
> +
> +OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> +
> +targets := Image
> +
> +$(obj)/Image: vmlinux FORCE
> + $(call if_changed,objcopy)
> +
> +$(obj)/Image.gz: $(obj)/Image FORCE
> + $(call if_changed,gzip)
> +
> +install:
> + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
> + $(obj)/Image System.map "$(INSTALL_PATH)"
> +
> +zinstall:
> + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
> + $(obj)/Image.gz System.map "$(INSTALL_PATH)"
> diff --git a/arch/riscv/boot/install.sh b/arch/riscv/boot/install.sh
> new file mode 100644
> index 000000000000..18c39159c0ff
> --- /dev/null
> +++ b/arch/riscv/boot/install.sh
> @@ -0,0 +1,60 @@
> +#!/bin/sh
> +#
> +# arch/riscv/boot/install.sh
> +#
> +# This file is subject to the terms and conditions of the GNU General Public
> +# License. See the file "COPYING" in the main directory of this archive
> +# for more details.
> +#
> +# Copyright (C) 1995 by Linus Torvalds
> +#
> +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
> +# Adapted from code in arch/i386/boot/install.sh by Russell King
> +#
> +# "make install" script for the RISC-V Linux port
> +#
> +# Arguments:
> +# $1 - kernel version
> +# $2 - kernel image file
> +# $3 - kernel map file
> +# $4 - default install path (blank if root directory)
> +#
> +
> +verify () {
> + if [ ! -f "$1" ]; then
> + echo "" 1>&2
> + echo " *** Missing file: $1" 1>&2
> + echo ' *** You need to run "make" before "make install".' 1>&2
> + echo "" 1>&2
> + exit 1
> + fi
> +}
> +
> +# Make sure the files actually exist
> +verify "$2"
> +verify "$3"
> +
> +# User may have a custom install script
> +if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
> +if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
> +
> +if [ "$(basename $2)" = "Image.gz" ]; then
> +# Compressed install
> + echo "Installing compressed kernel"
> + base=vmlinuz
> +else
> +# Normal install
> + echo "Installing normal kernel"
> + base=vmlinux
> +fi
> +
> +if [ -f $4/$base-$1 ]; then
> + mv $4/$base-$1 $4/$base-$1.old
> +fi
> +cat $2 > $4/$base-$1
> +
> +# Install system map file
> +if [ -f $4/System.map-$1 ]; then
> + mv $4/System.map-$1 $4/System.map-$1.old
> +fi
> +cp $3 $4/System.map-$1
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index 711190d473d4..fe884cd69abd 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -44,6 +44,16 @@ ENTRY(_start)
> amoadd.w a3, a2, (a3)
> bnez a3, .Lsecondary_start
>
> + /* Clear BSS for flat non-ELF images */
> + la a3, __bss_start
> + la a4, __bss_stop
> + ble a4, a3, clear_bss_done
> +clear_bss:
> + REG_S zero, (a3)
> + add a3, a3, RISCV_SZPTR
> + blt a3, a4, clear_bss
> +clear_bss_done:
> +
> /* Save hart ID and DTB physical address */
> mv s0, a0
> mv s1, a1
> diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> index ece84991609c..65df1dfdc303 100644
> --- a/arch/riscv/kernel/vmlinux.lds.S
> +++ b/arch/riscv/kernel/vmlinux.lds.S
> @@ -74,7 +74,7 @@ SECTIONS
> *(.sbss*)
> }
>
> - BSS_SECTION(0, 0, 0)
> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
What does this do?
>
> EXCEPTION_TABLE(0x10)
> NOTES
Thanks! I'm going to target this for the RCs as well: it's technically a new
feature, but it seems pretty safe -- assuming the BSS_SECTION change can be
explained to me :)
On Sat, Nov 17, 2018 at 2:43 AM Palmer Dabbelt <[email protected]> wrote:
>
> On Sun, 11 Nov 2018 21:55:15 PST (-0800), [email protected] wrote:
> > This patch extends Linux RISC-V build system to build and install:
> > Image - Flat uncompressed kernel image
> > Image.gz - Flat and GZip compressed kernel image
> >
> > Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
> > booting flat and compressed kernel images. In case of Uboot, booting
> > Image or Image.gz is achieved using bootm command.
> >
> > The flat and uncompressed kernel image (i.e. Image) is very useful
> > in pre-silicon developent and testing because we can create back-door
> > HEX files for RAM on FPGAs from Image.
> >
> > Signed-off-by: Anup Patel <[email protected]>
> > ---
> > arch/riscv/Makefile | 15 ++++++++-
> > arch/riscv/boot/.gitignore | 2 ++
> > arch/riscv/boot/Makefile | 33 ++++++++++++++++++
> > arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++
> > arch/riscv/kernel/head.S | 10 ++++++
> > arch/riscv/kernel/vmlinux.lds.S | 2 +-
> > 6 files changed, 120 insertions(+), 2 deletions(-)
> > create mode 100644 arch/riscv/boot/.gitignore
> > create mode 100644 arch/riscv/boot/Makefile
> > create mode 100644 arch/riscv/boot/install.sh
> >
> > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > index d10146197533..d117a60362eb 100644
> > --- a/arch/riscv/Makefile
> > +++ b/arch/riscv/Makefile
> > @@ -71,10 +71,23 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
> > # arch specific predefines for sparse
> > CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >
> > +# Default target when executing plain make
> > +boot := arch/riscv/boot
> > +KBUILD_IMAGE := $(boot)/Image.gz
> > +
> > head-y := arch/riscv/kernel/head.o
> >
> > core-y += arch/riscv/kernel/ arch/riscv/mm/
> >
> > libs-y += arch/riscv/lib/
> >
> > -all: vmlinux
> > +all: Image.gz
> > +
> > +Image: vmlinux
> > + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
> > +
> > +Image.%: Image
> > + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
> > +
> > +zinstall install:
> > + $(Q)$(MAKE) $(build)=$(boot) $@
> > diff --git a/arch/riscv/boot/.gitignore b/arch/riscv/boot/.gitignore
> > new file mode 100644
> > index 000000000000..8dab0bb6ae66
> > --- /dev/null
> > +++ b/arch/riscv/boot/.gitignore
> > @@ -0,0 +1,2 @@
> > +Image
> > +Image.gz
> > diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> > new file mode 100644
> > index 000000000000..0990a9fdbe5d
> > --- /dev/null
> > +++ b/arch/riscv/boot/Makefile
> > @@ -0,0 +1,33 @@
> > +#
> > +# arch/riscv/boot/Makefile
> > +#
> > +# This file is included by the global makefile so that you can add your own
> > +# architecture-specific flags and dependencies.
> > +#
> > +# This file is subject to the terms and conditions of the GNU General Public
> > +# License. See the file "COPYING" in the main directory of this archive
> > +# for more details.
> > +#
> > +# Copyright (C) 2018, Anup Patel.
> > +# Author: Anup Patel <[email protected]>
> > +#
> > +# Based on the ia64 and arm64 boot/Makefile.
> > +#
> > +
> > +OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> > +
> > +targets := Image
> > +
> > +$(obj)/Image: vmlinux FORCE
> > + $(call if_changed,objcopy)
> > +
> > +$(obj)/Image.gz: $(obj)/Image FORCE
> > + $(call if_changed,gzip)
> > +
> > +install:
> > + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
> > + $(obj)/Image System.map "$(INSTALL_PATH)"
> > +
> > +zinstall:
> > + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
> > + $(obj)/Image.gz System.map "$(INSTALL_PATH)"
> > diff --git a/arch/riscv/boot/install.sh b/arch/riscv/boot/install.sh
> > new file mode 100644
> > index 000000000000..18c39159c0ff
> > --- /dev/null
> > +++ b/arch/riscv/boot/install.sh
> > @@ -0,0 +1,60 @@
> > +#!/bin/sh
> > +#
> > +# arch/riscv/boot/install.sh
> > +#
> > +# This file is subject to the terms and conditions of the GNU General Public
> > +# License. See the file "COPYING" in the main directory of this archive
> > +# for more details.
> > +#
> > +# Copyright (C) 1995 by Linus Torvalds
> > +#
> > +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
> > +# Adapted from code in arch/i386/boot/install.sh by Russell King
> > +#
> > +# "make install" script for the RISC-V Linux port
> > +#
> > +# Arguments:
> > +# $1 - kernel version
> > +# $2 - kernel image file
> > +# $3 - kernel map file
> > +# $4 - default install path (blank if root directory)
> > +#
> > +
> > +verify () {
> > + if [ ! -f "$1" ]; then
> > + echo "" 1>&2
> > + echo " *** Missing file: $1" 1>&2
> > + echo ' *** You need to run "make" before "make install".' 1>&2
> > + echo "" 1>&2
> > + exit 1
> > + fi
> > +}
> > +
> > +# Make sure the files actually exist
> > +verify "$2"
> > +verify "$3"
> > +
> > +# User may have a custom install script
> > +if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
> > +if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
> > +
> > +if [ "$(basename $2)" = "Image.gz" ]; then
> > +# Compressed install
> > + echo "Installing compressed kernel"
> > + base=vmlinuz
> > +else
> > +# Normal install
> > + echo "Installing normal kernel"
> > + base=vmlinux
> > +fi
> > +
> > +if [ -f $4/$base-$1 ]; then
> > + mv $4/$base-$1 $4/$base-$1.old
> > +fi
> > +cat $2 > $4/$base-$1
> > +
> > +# Install system map file
> > +if [ -f $4/System.map-$1 ]; then
> > + mv $4/System.map-$1 $4/System.map-$1.old
> > +fi
> > +cp $3 $4/System.map-$1
> > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > index 711190d473d4..fe884cd69abd 100644
> > --- a/arch/riscv/kernel/head.S
> > +++ b/arch/riscv/kernel/head.S
> > @@ -44,6 +44,16 @@ ENTRY(_start)
> > amoadd.w a3, a2, (a3)
> > bnez a3, .Lsecondary_start
> >
> > + /* Clear BSS for flat non-ELF images */
> > + la a3, __bss_start
> > + la a4, __bss_stop
> > + ble a4, a3, clear_bss_done
> > +clear_bss:
> > + REG_S zero, (a3)
> > + add a3, a3, RISCV_SZPTR
> > + blt a3, a4, clear_bss
> > +clear_bss_done:
> > +
> > /* Save hart ID and DTB physical address */
> > mv s0, a0
> > mv s1, a1
> > diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> > index ece84991609c..65df1dfdc303 100644
> > --- a/arch/riscv/kernel/vmlinux.lds.S
> > +++ b/arch/riscv/kernel/vmlinux.lds.S
> > @@ -74,7 +74,7 @@ SECTIONS
> > *(.sbss*)
> > }
> >
> > - BSS_SECTION(0, 0, 0)
> > + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>
> What does this do?
If bootloader is loading vmlinux ELF then it will take care of
zeroing BSS and SBSS section.
If we have FLAT image then the head.S has to zero-out BSS
and SBSS on boot HART. The secondary/non-boot HART
don't need to clear BSS and SBSS.
Now with BSS_SECTION(0, 0, 0), there is no alignment
constraint on start of BSS and SBSS section so the BSS
zeroing code in head.S has handle unaligned BSS and
SBSS (i.e. not aligned to XLEN / 8 bytes). To simplify, I have
made BSS and SBSS start as page aligned and put a simple
assembly code in head.S to zero-out BSS and SBSS.
Of course, we can also use BSS_SECTION(16, 16, 0)
but I thought of avoiding magic values and made it
page aligned (like few other architectures).
>
> >
> > EXCEPTION_TABLE(0x10)
> > NOTES
>
> Thanks! I'm going to target this for the RCs as well: it's technically a new
> feature, but it seems pretty safe -- assuming the BSS_SECTION change can be
> explained to me :)
Thanks,
Anup
On Fri, 16 Nov 2018 19:32:04 PST (-0800), [email protected] wrote:
> On Sat, Nov 17, 2018 at 2:43 AM Palmer Dabbelt <[email protected]> wrote:
>>
>> On Sun, 11 Nov 2018 21:55:15 PST (-0800), [email protected] wrote:
>> > This patch extends Linux RISC-V build system to build and install:
>> > Image - Flat uncompressed kernel image
>> > Image.gz - Flat and GZip compressed kernel image
>> >
>> > Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
>> > booting flat and compressed kernel images. In case of Uboot, booting
>> > Image or Image.gz is achieved using bootm command.
>> >
>> > The flat and uncompressed kernel image (i.e. Image) is very useful
>> > in pre-silicon developent and testing because we can create back-door
>> > HEX files for RAM on FPGAs from Image.
>> >
>> > Signed-off-by: Anup Patel <[email protected]>
>> > ---
>> > arch/riscv/Makefile | 15 ++++++++-
>> > arch/riscv/boot/.gitignore | 2 ++
>> > arch/riscv/boot/Makefile | 33 ++++++++++++++++++
>> > arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++
>> > arch/riscv/kernel/head.S | 10 ++++++
>> > arch/riscv/kernel/vmlinux.lds.S | 2 +-
>> > 6 files changed, 120 insertions(+), 2 deletions(-)
>> > create mode 100644 arch/riscv/boot/.gitignore
>> > create mode 100644 arch/riscv/boot/Makefile
>> > create mode 100644 arch/riscv/boot/install.sh
>> >
>> > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
>> > index d10146197533..d117a60362eb 100644
>> > --- a/arch/riscv/Makefile
>> > +++ b/arch/riscv/Makefile
>> > @@ -71,10 +71,23 @@ KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
>> > # arch specific predefines for sparse
>> > CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>> >
>> > +# Default target when executing plain make
>> > +boot := arch/riscv/boot
>> > +KBUILD_IMAGE := $(boot)/Image.gz
>> > +
>> > head-y := arch/riscv/kernel/head.o
>> >
>> > core-y += arch/riscv/kernel/ arch/riscv/mm/
>> >
>> > libs-y += arch/riscv/lib/
>> >
>> > -all: vmlinux
>> > +all: Image.gz
>> > +
>> > +Image: vmlinux
>> > + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
>> > +
>> > +Image.%: Image
>> > + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
>> > +
>> > +zinstall install:
>> > + $(Q)$(MAKE) $(build)=$(boot) $@
>> > diff --git a/arch/riscv/boot/.gitignore b/arch/riscv/boot/.gitignore
>> > new file mode 100644
>> > index 000000000000..8dab0bb6ae66
>> > --- /dev/null
>> > +++ b/arch/riscv/boot/.gitignore
>> > @@ -0,0 +1,2 @@
>> > +Image
>> > +Image.gz
>> > diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
>> > new file mode 100644
>> > index 000000000000..0990a9fdbe5d
>> > --- /dev/null
>> > +++ b/arch/riscv/boot/Makefile
>> > @@ -0,0 +1,33 @@
>> > +#
>> > +# arch/riscv/boot/Makefile
>> > +#
>> > +# This file is included by the global makefile so that you can add your own
>> > +# architecture-specific flags and dependencies.
>> > +#
>> > +# This file is subject to the terms and conditions of the GNU General Public
>> > +# License. See the file "COPYING" in the main directory of this archive
>> > +# for more details.
>> > +#
>> > +# Copyright (C) 2018, Anup Patel.
>> > +# Author: Anup Patel <[email protected]>
>> > +#
>> > +# Based on the ia64 and arm64 boot/Makefile.
>> > +#
>> > +
>> > +OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
>> > +
>> > +targets := Image
>> > +
>> > +$(obj)/Image: vmlinux FORCE
>> > + $(call if_changed,objcopy)
>> > +
>> > +$(obj)/Image.gz: $(obj)/Image FORCE
>> > + $(call if_changed,gzip)
>> > +
>> > +install:
>> > + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
>> > + $(obj)/Image System.map "$(INSTALL_PATH)"
>> > +
>> > +zinstall:
>> > + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
>> > + $(obj)/Image.gz System.map "$(INSTALL_PATH)"
>> > diff --git a/arch/riscv/boot/install.sh b/arch/riscv/boot/install.sh
>> > new file mode 100644
>> > index 000000000000..18c39159c0ff
>> > --- /dev/null
>> > +++ b/arch/riscv/boot/install.sh
>> > @@ -0,0 +1,60 @@
>> > +#!/bin/sh
>> > +#
>> > +# arch/riscv/boot/install.sh
>> > +#
>> > +# This file is subject to the terms and conditions of the GNU General Public
>> > +# License. See the file "COPYING" in the main directory of this archive
>> > +# for more details.
>> > +#
>> > +# Copyright (C) 1995 by Linus Torvalds
>> > +#
>> > +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
>> > +# Adapted from code in arch/i386/boot/install.sh by Russell King
>> > +#
>> > +# "make install" script for the RISC-V Linux port
>> > +#
>> > +# Arguments:
>> > +# $1 - kernel version
>> > +# $2 - kernel image file
>> > +# $3 - kernel map file
>> > +# $4 - default install path (blank if root directory)
>> > +#
>> > +
>> > +verify () {
>> > + if [ ! -f "$1" ]; then
>> > + echo "" 1>&2
>> > + echo " *** Missing file: $1" 1>&2
>> > + echo ' *** You need to run "make" before "make install".' 1>&2
>> > + echo "" 1>&2
>> > + exit 1
>> > + fi
>> > +}
>> > +
>> > +# Make sure the files actually exist
>> > +verify "$2"
>> > +verify "$3"
>> > +
>> > +# User may have a custom install script
>> > +if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
>> > +if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
>> > +
>> > +if [ "$(basename $2)" = "Image.gz" ]; then
>> > +# Compressed install
>> > + echo "Installing compressed kernel"
>> > + base=vmlinuz
>> > +else
>> > +# Normal install
>> > + echo "Installing normal kernel"
>> > + base=vmlinux
>> > +fi
>> > +
>> > +if [ -f $4/$base-$1 ]; then
>> > + mv $4/$base-$1 $4/$base-$1.old
>> > +fi
>> > +cat $2 > $4/$base-$1
>> > +
>> > +# Install system map file
>> > +if [ -f $4/System.map-$1 ]; then
>> > + mv $4/System.map-$1 $4/System.map-$1.old
>> > +fi
>> > +cp $3 $4/System.map-$1
>> > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>> > index 711190d473d4..fe884cd69abd 100644
>> > --- a/arch/riscv/kernel/head.S
>> > +++ b/arch/riscv/kernel/head.S
>> > @@ -44,6 +44,16 @@ ENTRY(_start)
>> > amoadd.w a3, a2, (a3)
>> > bnez a3, .Lsecondary_start
>> >
>> > + /* Clear BSS for flat non-ELF images */
>> > + la a3, __bss_start
>> > + la a4, __bss_stop
>> > + ble a4, a3, clear_bss_done
>> > +clear_bss:
>> > + REG_S zero, (a3)
>> > + add a3, a3, RISCV_SZPTR
>> > + blt a3, a4, clear_bss
>> > +clear_bss_done:
>> > +
>> > /* Save hart ID and DTB physical address */
>> > mv s0, a0
>> > mv s1, a1
>> > diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
>> > index ece84991609c..65df1dfdc303 100644
>> > --- a/arch/riscv/kernel/vmlinux.lds.S
>> > +++ b/arch/riscv/kernel/vmlinux.lds.S
>> > @@ -74,7 +74,7 @@ SECTIONS
>> > *(.sbss*)
>> > }
>> >
>> > - BSS_SECTION(0, 0, 0)
>> > + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>>
>> What does this do?
>
> If bootloader is loading vmlinux ELF then it will take care of
> zeroing BSS and SBSS section.
>
> If we have FLAT image then the head.S has to zero-out BSS
> and SBSS on boot HART. The secondary/non-boot HART
> don't need to clear BSS and SBSS.
>
> Now with BSS_SECTION(0, 0, 0), there is no alignment
> constraint on start of BSS and SBSS section so the BSS
> zeroing code in head.S has handle unaligned BSS and
> SBSS (i.e. not aligned to XLEN / 8 bytes). To simplify, I have
> made BSS and SBSS start as page aligned and put a simple
> assembly code in head.S to zero-out BSS and SBSS.
>
> Of course, we can also use BSS_SECTION(16, 16, 0)
> but I thought of avoiding magic values and made it
> page aligned (like few other architectures).
Makes sense, at least for now. We might want to default to alignment to a
larger alignment (2MiB on rv64i, 4MiB on rv32i) at some point, but that's a
larger discussion.
I've already queued this up for this week's PR, which I'll tag as soon as I
managed to get through my email :)
>
>>
>> >
>> > EXCEPTION_TABLE(0x10)
>> > NOTES
>>
>> Thanks! I'm going to target this for the RCs as well: it's technically a new
>> feature, but it seems pretty safe -- assuming the BSS_SECTION change can be
>> explained to me :)
>
> Thanks,
> Anup
On Mon, Nov 12, 2018 at 1:55 PM Anup Patel <[email protected]> wrote:
>
> This patch extends Linux RISC-V build system to build and install:
> Image - Flat uncompressed kernel image
> Image.gz - Flat and GZip compressed kernel image
>
> Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
nits: U-Boot
> booting flat and compressed kernel images. In case of Uboot, booting
nits: U-Boot
> Image or Image.gz is achieved using bootm command.
>
> The flat and uncompressed kernel image (i.e. Image) is very useful
> in pre-silicon developent and testing because we can create back-door
> HEX files for RAM on FPGAs from Image.
>
> Signed-off-by: Anup Patel <[email protected]>
> ---
> arch/riscv/Makefile | 15 ++++++++-
> arch/riscv/boot/.gitignore | 2 ++
> arch/riscv/boot/Makefile | 33 ++++++++++++++++++
> arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++
> arch/riscv/kernel/head.S | 10 ++++++
> arch/riscv/kernel/vmlinux.lds.S | 2 +-
> 6 files changed, 120 insertions(+), 2 deletions(-)
> create mode 100644 arch/riscv/boot/.gitignore
> create mode 100644 arch/riscv/boot/Makefile
> create mode 100644 arch/riscv/boot/install.sh
>
Reviewed-by: Bin Meng <[email protected]>
Tested with U-Boot s-mode on QEMU virt, using bootm to boot the kernel
Tested-by: Bin Meng <[email protected]>
Regards,
Bin
On Tue, 20 Nov 2018 21:06:18 PST (-0800), [email protected] wrote:
> On Mon, Nov 12, 2018 at 1:55 PM Anup Patel <[email protected]> wrote:
>>
>> This patch extends Linux RISC-V build system to build and install:
>> Image - Flat uncompressed kernel image
>> Image.gz - Flat and GZip compressed kernel image
>>
>> Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
>
> nits: U-Boot
>
>> booting flat and compressed kernel images. In case of Uboot, booting
>
> nits: U-Boot
Thanks for the review. The PR has already been tagged, but it's not scheduled
to be sent out until later today. I generally try to avoid rewriting the tags
unless there's something major that's wrong, so unless you feel very strongly
about this then I think I'll let it stand.
Let me know if this is a big deal for you, I can rewrite things.
>> Image or Image.gz is achieved using bootm command.
>>
>> The flat and uncompressed kernel image (i.e. Image) is very useful
>> in pre-silicon developent and testing because we can create back-door
>> HEX files for RAM on FPGAs from Image.
>>
>> Signed-off-by: Anup Patel <[email protected]>
>> ---
>> arch/riscv/Makefile | 15 ++++++++-
>> arch/riscv/boot/.gitignore | 2 ++
>> arch/riscv/boot/Makefile | 33 ++++++++++++++++++
>> arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++
>> arch/riscv/kernel/head.S | 10 ++++++
>> arch/riscv/kernel/vmlinux.lds.S | 2 +-
>> 6 files changed, 120 insertions(+), 2 deletions(-)
>> create mode 100644 arch/riscv/boot/.gitignore
>> create mode 100644 arch/riscv/boot/Makefile
>> create mode 100644 arch/riscv/boot/install.sh
>>
>
> Reviewed-by: Bin Meng <[email protected]>
>
> Tested with U-Boot s-mode on QEMU virt, using bootm to boot the kernel
> Tested-by: Bin Meng <[email protected]>
I also won't include the tags unless I rewrite the tags.
Thanks for the review!
Hi Palmer,
On Thu, Nov 22, 2018 at 12:28 AM Palmer Dabbelt <[email protected]> wrote:
>
> On Tue, 20 Nov 2018 21:06:18 PST (-0800), [email protected] wrote:
> > On Mon, Nov 12, 2018 at 1:55 PM Anup Patel <[email protected]> wrote:
> >>
> >> This patch extends Linux RISC-V build system to build and install:
> >> Image - Flat uncompressed kernel image
> >> Image.gz - Flat and GZip compressed kernel image
> >>
> >> Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
> >
> > nits: U-Boot
> >
> >> booting flat and compressed kernel images. In case of Uboot, booting
> >
> > nits: U-Boot
>
> Thanks for the review. The PR has already been tagged, but it's not scheduled
> to be sent out until later today. I generally try to avoid rewriting the tags
> unless there's something major that's wrong, so unless you feel very strongly
> about this then I think I'll let it stand.
>
> Let me know if this is a big deal for you, I can rewrite things.
>
> >> Image or Image.gz is achieved using bootm command.
> >>
> >> The flat and uncompressed kernel image (i.e. Image) is very useful
> >> in pre-silicon developent and testing because we can create back-door
> >> HEX files for RAM on FPGAs from Image.
> >>
> >> Signed-off-by: Anup Patel <[email protected]>
> >> ---
> >> arch/riscv/Makefile | 15 ++++++++-
> >> arch/riscv/boot/.gitignore | 2 ++
> >> arch/riscv/boot/Makefile | 33 ++++++++++++++++++
> >> arch/riscv/boot/install.sh | 60 +++++++++++++++++++++++++++++++++
> >> arch/riscv/kernel/head.S | 10 ++++++
> >> arch/riscv/kernel/vmlinux.lds.S | 2 +-
> >> 6 files changed, 120 insertions(+), 2 deletions(-)
> >> create mode 100644 arch/riscv/boot/.gitignore
> >> create mode 100644 arch/riscv/boot/Makefile
> >> create mode 100644 arch/riscv/boot/install.sh
> >>
> >
> > Reviewed-by: Bin Meng <[email protected]>
> >
> > Tested with U-Boot s-mode on QEMU virt, using bootm to boot the kernel
> > Tested-by: Bin Meng <[email protected]>
>
> I also won't include the tags unless I rewrite the tags.
>
> Thanks for the review!
Thanks. Let's go with this as it's a minor nits.
Regards,
Bin