Introduce XIP (eXecute In Place) support for RISC-V platforms.
It allows code to be executed directly from non-volatile storage
directly addressable by the CPU, such as QSPI NOR flash which can
be found on many RISC-V platforms. This makes way for significant
optimization of RAM footprint. The XIP kernel is not compressed
since it has to run directly from flash, so it will occupy more
space on the non-volatile storage. The physical flash address used
to link the kernel object files and for storing it has to be known
at compile time and is represented by a Kconfig option.
XIP on RISC-V will for the time being only work on MMU-enabled
kernels.
Signed-off-by: Vitaly Wool <[email protected]>
---
Changes in v2:
- dedicated macro for XIP address fixup when MMU is not enabled yet
o both for 32-bit and 64-bit RISC-V
- SP is explicitly set to a safe place in RAM before __copy_data call
- removed redundant alignment requirements in vmlinux-xip.lds.S
- changed long -> uintptr_t typecast in __XIP_FIXUP macro.
Changes in v3:
- rebased against latest for-next
- XIP address fixup macro now takes an argument
- SMP related fixes
Changes in v4:
- rebased against the current for-next
- less #ifdef's in C/ASM code
- dedicated XIP_FIXUP_OFFSET assembler macro in head.S
- C-specific definitions moved into #ifndef __ASSEMBLY__
- Fixed multi-core boot
Changes in v5:
- fixed build error for non-XIP kernels
Changes in v6:
- XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
- added PHYS_RAM_BASE_FIXED config flag to allow usage of
PHYS_RAM_BASE in non-XIP configurations if needed
- XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
effects
- fixed crash for non-XIP kernels that don't use built-in DTB
arch/riscv/Kconfig | 49 ++++++++++-
arch/riscv/Makefile | 8 +-
arch/riscv/boot/Makefile | 13 +++
arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
arch/riscv/kernel/head.S | 49 ++++++++++-
arch/riscv/kernel/head.h | 3 +
arch/riscv/kernel/setup.c | 8 +-
arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++++
arch/riscv/kernel/vmlinux.lds.S | 6 ++
arch/riscv/mm/init.c | 100 +++++++++++++++++++--
11 files changed, 426 insertions(+), 18 deletions(-)
create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 8ea60a0a19ae..bd6f82240c34 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -441,7 +441,7 @@ config EFI_STUB
config EFI
bool "UEFI runtime support"
- depends on OF
+ depends on OF && !XIP_KERNEL
select LIBFDT
select UCS2_STRING
select EFI_PARAMS_FROM_FDT
@@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
def_bool y
depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
+config PHYS_RAM_BASE_FIXED
+ bool "Explicitly specified physical RAM address"
+ default n
+
+config PHYS_RAM_BASE
+ hex "Platform Physical RAM address"
+ depends on PHYS_RAM_BASE_FIXED
+ default "0x80000000"
+ help
+ This is the physical address of RAM in the system. It has to be
+ explicitly specified to run early relocations of read-write data
+ from flash to RAM.
+
+config XIP_KERNEL
+ bool "Kernel Execute-In-Place from ROM"
+ depends on MMU
+ select PHYS_RAM_BASE_FIXED
+ help
+ Execute-In-Place allows the kernel to run from non-volatile storage
+ directly addressable by the CPU, such as NOR flash. This saves RAM
+ space since the text section of the kernel is not loaded from flash
+ to RAM. Read-write sections, such as the data section and stack,
+ are still copied to RAM. The XIP kernel is not compressed since
+ it has to run directly from flash, so it will take more space to
+ store it. The flash address used to link the kernel object files,
+ and for storing it, is configuration dependent. Therefore, if you
+ say Y here, you must know the proper physical address where to
+ store the kernel image depending on your own flash memory usage.
+
+ Also note that the make target becomes "make xipImage" rather than
+ "make zImage" or "make Image". The final kernel binary to put in
+ ROM memory will be arch/riscv/boot/xipImage.
+
+ If unsure, say N.
+
+config XIP_PHYS_ADDR
+ hex "XIP Kernel Physical Location"
+ depends on XIP_KERNEL
+ default "0x21000000"
+ help
+ This is the physical address in your flash memory the kernel will
+ be linked for and stored to. This address is dependent on your
+ own flash usage.
+
endmenu
config BUILTIN_DTB
- def_bool n
+ bool
depends on OF
+ default y if XIP_KERNEL
menu "Power management options"
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 1368d943f1f3..8fcbec03974d 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
# Default target when executing plain make
boot := arch/riscv/boot
+ifeq ($(CONFIG_XIP_KERNEL),y)
+KBUILD_IMAGE := $(boot)/xipImage
+else
KBUILD_IMAGE := $(boot)/Image.gz
+endif
head-y := arch/riscv/kernel/head.o
@@ -95,12 +99,14 @@ PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
+ifneq ($(CONFIG_XIP_KERNEL),y)
ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
KBUILD_IMAGE := $(boot)/loader.bin
else
KBUILD_IMAGE := $(boot)/Image.gz
endif
-BOOT_TARGETS := Image Image.gz loader loader.bin
+endif
+BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
all: $(notdir $(KBUILD_IMAGE))
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
index 03404c84f971..6bf299f70c27 100644
--- a/arch/riscv/boot/Makefile
+++ b/arch/riscv/boot/Makefile
@@ -17,8 +17,21 @@
KCOV_INSTRUMENT := n
OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
targets := Image Image.* loader loader.o loader.lds loader.bin
+targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
+
+ifeq ($(CONFIG_XIP_KERNEL),y)
+
+quiet_cmd_mkxip = $(quiet_cmd_objcopy)
+cmd_mkxip = $(cmd_objcopy)
+
+$(obj)/xipImage: vmlinux FORCE
+ $(call if_changed,mkxip)
+ @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
+
+endif
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index ebf817c1bdf4..21a9b2f8d1c7 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -11,6 +11,33 @@
#include <asm/pgtable-bits.h>
+#ifdef CONFIG_MMU
+
+#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
+
+#ifdef CONFIG_XIP_KERNEL
+#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
+#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
+
+#define XIP_OFFSET SZ_8M
+#define XIP_MASK (SZ_8M - 1)
+#define XIP_VIRT_ADDR(physaddr) \
+ (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
+
+#else
+
+#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
+#define VMALLOC_END (PAGE_OFFSET - 1)
+
+#endif /* CONFIG_XIP_KERNEL */
+
+#else
+
+#ifdef CONFIG_XIP_KERNEL
+#define XIP_VIRT_ADDR(physaddr) (physaddr)
+#endif /* CONFIG_XIP_KERNEL */
+#endif /* CONFIG_MMU */
+
#ifndef __ASSEMBLY__
/* Page Upper Directory not used in RISC-V */
@@ -21,9 +48,25 @@
#ifdef CONFIG_MMU
-#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
-#define VMALLOC_END (PAGE_OFFSET - 1)
-#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
+#ifdef CONFIG_XIP_KERNEL
+/*
+ * Since we use sections to map it, this macro replaces the physical address
+ * with its virtual address while keeping offset from the base section.
+ */
+#define XIP_PHYS_ADDR(va) \
+ ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
+
+#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+
+#define XIP_FIXUP(addr) ({ \
+ uintptr_t __a = (uintptr_t)(addr); \
+ (__a >= CONFIG_XIP_PHYS_ADDR && \
+ __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
+ __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET : __a; \
+})
+#else
+#define XIP_FIXUP(addr) (addr)
+#endif /* CONFIG_XIP_KERNEL */
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
@@ -484,8 +527,20 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
#define kern_addr_valid(addr) (1) /* FIXME */
-extern void *dtb_early_va;
-extern uintptr_t dtb_early_pa;
+extern void *_dtb_early_va;
+extern uintptr_t _dtb_early_pa;
+#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
+
+#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
+#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
+
+#else
+
+#define dtb_early_va _dtb_early_va
+#define dtb_early_pa _dtb_early_pa
+
+#endif /* CONFIG_XIP_KERNEL */
+
void setup_bootmem(void);
void paging_init(void);
void misc_mem_init(void);
diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
index 685fae72b7f5..2413c2997350 100644
--- a/arch/riscv/kernel/cpu_ops_sbi.c
+++ b/arch/riscv/kernel/cpu_ops_sbi.c
@@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned long hartid)
}
#endif
+static inline unsigned long get_secondary_start_phys(void)
+{
+#ifdef CONFIG_XIP_KERNEL
+ return XIP_PHYS_ADDR(secondary_start_sbi);
+#else
+ return __pa_symbol(secondary_start_sbi);
+#endif
+}
+
static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
{
int rc;
- unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
+ unsigned long boot_addr = get_secondary_start_phys();
int hartid = cpuid_to_hartid_map(cpuid);
cpu_update_secondary_bootdata(cpuid, tidle);
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index f5a9bad86e58..bbe74e37914f 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -9,11 +9,23 @@
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/page.h>
+#include <asm/pgtable.h>
#include <asm/csr.h>
#include <asm/hwcap.h>
#include <asm/image.h>
#include "efi-header.S"
+#ifdef CONFIG_XIP_KERNEL
+.macro XIP_FIXUP_OFFSET reg
+ REG_L t0, _xip_fixup
+ add \reg, \reg, t0
+.endm
+_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
+#else
+.macro XIP_FIXUP_OFFSET reg
+.endm
+#endif /* CONFIG_XIP_KERNEL */
+
__HEAD
ENTRY(_start)
/*
@@ -69,7 +81,11 @@ pe_head_start:
#ifdef CONFIG_MMU
relocate:
/* Relocate return address */
+#ifdef CONFIG_XIP_KERNEL
+ li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#else
li a1, PAGE_OFFSET
+#endif
la a2, _start
sub a1, a1, a2
add ra, ra, a1
@@ -91,6 +107,7 @@ relocate:
* to ensure the new translations are in use.
*/
la a0, trampoline_pg_dir
+ XIP_FIXUP_OFFSET a0
srl a0, a0, PAGE_SHIFT
or a0, a0, a1
sfence.vma
@@ -144,7 +161,9 @@ secondary_start_sbi:
slli a3, a0, LGREG
la a4, __cpu_up_stack_pointer
+ XIP_FIXUP_OFFSET a4
la a5, __cpu_up_task_pointer
+ XIP_FIXUP_OFFSET a5
add a4, a3, a4
add a5, a3, a5
REG_L sp, (a4)
@@ -156,6 +175,7 @@ secondary_start_common:
#ifdef CONFIG_MMU
/* Enable virtual memory and relocate to virtual address */
la a0, swapper_pg_dir
+ XIP_FIXUP_OFFSET a0
call relocate
#endif
call setup_trap_vector
@@ -236,12 +256,33 @@ pmp_done:
.Lgood_cores:
#endif
+#ifndef CONFIG_XIP_KERNEL
/* Pick one hart to run the main boot sequence */
la a3, hart_lottery
li a2, 1
amoadd.w a3, a2, (a3)
bnez a3, .Lsecondary_start
+#else
+ /* hart_lottery in flash contains a magic number */
+ la a3, hart_lottery
+ mv a2, a3
+ XIP_FIXUP_OFFSET a2
+ lw t1, (a3)
+ amoswap.w t0, t1, (a2)
+ /* first time here if hart_lottery in RAM is not set */
+ beq t0, t1, .Lsecondary_start
+
+ la sp, _end + THREAD_SIZE
+ XIP_FIXUP_OFFSET sp
+ mv s0, a0
+ call __copy_data
+
+ /* Restore a0 copy */
+ mv a0, s0
+#endif
+
+#ifndef CONFIG_XIP_KERNEL
/* Clear BSS for flat non-ELF images */
la a3, __bss_start
la a4, __bss_stop
@@ -251,15 +292,18 @@ clear_bss:
add a3, a3, RISCV_SZPTR
blt a3, a4, clear_bss
clear_bss_done:
-
+#endif
/* Save hart ID and DTB physical address */
mv s0, a0
mv s1, a1
+
la a2, boot_cpu_hartid
+ XIP_FIXUP_OFFSET a2
REG_S a0, (a2)
/* Initialize page tables and relocate to virtual addresses */
la sp, init_thread_union + THREAD_SIZE
+ XIP_FIXUP_OFFSET sp
#ifdef CONFIG_BUILTIN_DTB
la a0, __dtb_start
#else
@@ -268,6 +312,7 @@ clear_bss_done:
call setup_vm
#ifdef CONFIG_MMU
la a0, early_pg_dir
+ XIP_FIXUP_OFFSET a0
call relocate
#endif /* CONFIG_MMU */
@@ -292,7 +337,9 @@ clear_bss_done:
slli a3, a0, LGREG
la a1, __cpu_up_stack_pointer
+ XIP_FIXUP_OFFSET a1
la a2, __cpu_up_task_pointer
+ XIP_FIXUP_OFFSET a2
add a1, a3, a1
add a2, a3, a2
diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
index b48dda3d04f6..aabbc3ac3e48 100644
--- a/arch/riscv/kernel/head.h
+++ b/arch/riscv/kernel/head.h
@@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
asmlinkage void do_page_fault(struct pt_regs *regs);
asmlinkage void __init setup_vm(uintptr_t dtb_pa);
+#ifdef CONFIG_XIP_KERNEL
+asmlinkage void __init __copy_data(void);
+#endif
extern void *__cpu_up_stack_pointer[];
extern void *__cpu_up_task_pointer[];
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index e85bacff1b50..a0384c72c272 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
* This is used before the kernel initializes the BSS so it can't be in the
* BSS.
*/
-atomic_t hart_lottery __section(".sdata");
+atomic_t hart_lottery __section(".sdata")
+#ifdef CONFIG_XIP_KERNEL
+= ATOMIC_INIT(0xC001BEEF)
+#endif
+;
unsigned long boot_cpu_hartid;
static DEFINE_PER_CPU(struct cpu, cpu_devices);
@@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
#if IS_ENABLED(CONFIG_BUILTIN_DTB)
unflatten_and_copy_device_tree();
#else
- if (early_init_dt_verify(__va(dtb_early_pa)))
+ if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
unflatten_device_tree();
else
pr_err("No DTB found in kernel mappings\n");
diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
new file mode 100644
index 000000000000..9f0f08c34cd3
--- /dev/null
+++ b/arch/riscv/kernel/vmlinux-xip.lds.S
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ * Copyright (C) 2020 Vitaly Wool, Konsulko AB
+ */
+
+#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+/* No __ro_after_init data in the .rodata section - which will always be ro */
+#define RO_AFTER_INIT_DATA
+
+#include <asm/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+
+OUTPUT_ARCH(riscv)
+ENTRY(_start)
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+ /* Beginning of code and text segment */
+ . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
+ _xiprom = .;
+ _start = .;
+ HEAD_TEXT_SECTION
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ /* we have to discard exit text and such at runtime, not link time */
+ .exit.text :
+ {
+ EXIT_TEXT
+ }
+
+ .text : {
+ _text = .;
+ _stext = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ CPUIDLE_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ ENTRY_TEXT
+ IRQENTRY_TEXT
+ SOFTIRQENTRY_TEXT
+ *(.fixup)
+ _etext = .;
+ }
+ RO_DATA(L1_CACHE_BYTES)
+ .srodata : {
+ *(.srodata*)
+ }
+ .init.rodata : {
+ INIT_SETUP(16)
+ INIT_CALLS
+ CON_INITCALL
+ INIT_RAM_FS
+ }
+ _exiprom = .; /* End of XIP ROM area */
+
+
+/*
+ * From this point, stuff is considered writable and will be copied to RAM
+ */
+ __data_loc = ALIGN(16); /* location in file */
+ . = PAGE_OFFSET; /* location in memory */
+
+ _sdata = .; /* Start of data section */
+ _data = .;
+ RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
+ __start_ro_after_init = .;
+ .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
+ *(.data..ro_after_init)
+ }
+ __end_ro_after_init = .;
+
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+ .init.data : {
+ INIT_DATA
+ }
+ .exit.data : {
+ EXIT_DATA
+ }
+ . = ALIGN(8);
+ __soc_early_init_table : {
+ __soc_early_init_table_start = .;
+ KEEP(*(__soc_early_init_table))
+ __soc_early_init_table_end = .;
+ }
+ __soc_builtin_dtb_table : {
+ __soc_builtin_dtb_table_start = .;
+ KEEP(*(__soc_builtin_dtb_table))
+ __soc_builtin_dtb_table_end = .;
+ }
+ PERCPU_SECTION(L1_CACHE_BYTES)
+
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+
+ .sdata : {
+ __global_pointer$ = . + 0x800;
+ *(.sdata*)
+ *(.sbss*)
+ }
+
+ BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
+ EXCEPTION_TABLE(0x10)
+
+ .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
+ *(.rel.dyn*)
+ }
+
+ /*
+ * End of copied data. We need a dummy section to get its LMA.
+ * Also located before final ALIGN() as trailing padding is not stored
+ * in the resulting binary file and useless to copy.
+ */
+ .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
+ _edata_loc = LOADADDR(.data.endmark);
+
+ . = ALIGN(PAGE_SIZE);
+ _end = .;
+
+ STABS_DEBUG
+ DWARF_DEBUG
+
+ DISCARDS
+}
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index de03cb22d0e9..6745ec325930 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -4,7 +4,12 @@
* Copyright (C) 2017 SiFive
*/
+#ifdef CONFIG_XIP_KERNEL
+#include "vmlinux-xip.lds.S"
+#else
+
#define LOAD_OFFSET PAGE_OFFSET
+
#include <asm/vmlinux.lds.h>
#include <asm/page.h>
#include <asm/cache.h>
@@ -132,3 +137,4 @@ SECTIONS
DISCARDS
}
+#endif /* CONFIG_XIP_KERNEL */
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 7f5036fbee8c..efe649d41f95 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
extern char _start[];
#define DTB_EARLY_BASE_VA PGDIR_SIZE
-void *dtb_early_va __initdata;
-uintptr_t dtb_early_pa __initdata;
+void *_dtb_early_va __initdata;
+uintptr_t _dtb_early_pa __initdata;
struct pt_alloc_ops {
pte_t *(*get_pte_virt)(phys_addr_t pa);
@@ -88,6 +88,10 @@ static void print_vm_layout(void)
(unsigned long)VMALLOC_END);
print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
(unsigned long)high_memory);
+#ifdef CONFIG_XIP_KERNEL
+ print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
+ (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
+#endif /* CONFIG_XIP_KERNEL */
}
#else
static void print_vm_layout(void) { }
@@ -113,6 +117,10 @@ void __init setup_bootmem(void)
phys_addr_t dram_end = memblock_end_of_DRAM();
phys_addr_t max_mapped_addr = __pa(~(ulong)0);
+#ifdef CONFIG_XIP_KERNEL
+ vmlinux_start = __pa_symbol(&_sdata);
+#endif
+
/* The maximal physical memory size is -PAGE_OFFSET. */
memblock_enforce_memory_limit(-PAGE_OFFSET);
@@ -149,11 +157,27 @@ void __init setup_bootmem(void)
memblock_allow_resize();
}
+#ifdef CONFIG_XIP_KERNEL
+
+extern char _xiprom[], _exiprom[];
+extern char _sdata[], _edata[];
+
+#endif /* CONFIG_XIP_KERNEL */
+
#ifdef CONFIG_MMU
-static struct pt_alloc_ops pt_ops;
+static struct pt_alloc_ops _pt_ops;
+
+#ifdef CONFIG_XIP_KERNEL
+#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
+#else
+#define pt_ops _pt_ops
+#endif
unsigned long va_pa_offset;
EXPORT_SYMBOL(va_pa_offset);
+#ifdef CONFIG_XIP_KERNEL
+#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
+#endif
unsigned long pfn_base;
EXPORT_SYMBOL(pfn_base);
@@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+#ifdef CONFIG_XIP_KERNEL
+#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
+#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
+#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
+#endif /* CONFIG_XIP_KERNEL */
+
void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
{
unsigned long addr = __fix_to_virt(idx);
@@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
+#ifdef CONFIG_XIP_KERNEL
+pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
+
+#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
+#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
+#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
+#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
+#endif /* CONFIG_XIP_KERNEL */
+
static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
{
/* Before MMU is enabled */
@@ -354,6 +393,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
return PMD_SIZE;
}
+#ifdef CONFIG_XIP_KERNEL
+/* called from head.S with MMU off */
+asmlinkage void __init __copy_data(void)
+{
+ void *from = (void *)(&_sdata);
+ void *end = (void *)(&_end);
+ void *to = (void *)CONFIG_PHYS_RAM_BASE;
+ size_t sz = (size_t)(end - from);
+
+ memcpy(to, from, sz);
+}
+#endif
+
/*
* setup_vm() is called from head.S with MMU-off.
*
@@ -374,7 +426,8 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
asmlinkage void __init setup_vm(uintptr_t dtb_pa)
{
- uintptr_t va, pa, end_va;
+ uintptr_t va, end_va;
+ uintptr_t __maybe_unused pa;
uintptr_t load_pa = (uintptr_t)(&_start);
uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
uintptr_t map_size;
@@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
pmd_t fix_bmap_spmd, fix_bmap_epmd;
#endif
+#ifdef CONFIG_XIP_KERNEL
+ uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
+ uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
+
+ load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
+ load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
+#endif
va_pa_offset = PAGE_OFFSET - load_pa;
pfn_base = PFN_DOWN(load_pa);
@@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
#endif
+#ifdef CONFIG_XIP_KERNEL
+ create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
+ (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
+ for (va = XIP_VIRT_ADDR_START;
+ va < XIP_VIRT_ADDR_START + xiprom_sz;
+ va += PMD_SIZE) {
+ create_pmd_mapping(xip_pmd, va,
+ xiprom + (va - XIP_VIRT_ADDR_START),
+ PMD_SIZE, PAGE_KERNEL_EXEC);
+ }
+
+ create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
+ (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
+#endif
+
/*
* Setup early PGD covering entire kernel which will allows
* us to reach paging_init(). We map all memory banks later
@@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
#else /* CONFIG_BUILTIN_DTB */
- dtb_early_va = __va(dtb_pa);
+ dtb_early_va = __va(XIP_FIXUP(dtb_pa));
#endif /* CONFIG_BUILTIN_DTB */
#else
#ifndef CONFIG_BUILTIN_DTB
@@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
#else /* CONFIG_BUILTIN_DTB */
- dtb_early_va = __va(dtb_pa);
+ dtb_early_va = __va(XIP_FIXUP(dtb_pa));
#endif /* CONFIG_BUILTIN_DTB */
#endif
dtb_early_pa = dtb_pa;
@@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
uintptr_t va, map_size;
phys_addr_t pa, start, end;
u64 i;
+#ifdef CONFIG_XIP_KERNEL
+ uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
+#endif
/**
* MMU is enabled at this point. But page table setup is not complete yet.
@@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
map_size, PAGE_KERNEL_EXEC);
}
}
+#ifdef CONFIG_XIP_KERNEL
+ map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
+ for (va = XIP_VIRT_ADDR_START;
+ va < XIP_VIRT_ADDR_START + xiprom_sz;
+ va += map_size)
+ create_pgd_mapping(swapper_pg_dir, va,
+ CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
+ map_size, PAGE_KERNEL_EXEC);
+
+#endif
/* Clear fixmap PTE and PMD mappings */
clear_fixmap(FIX_PTE);
--
2.29.2
On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected] wrote:
> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> It allows code to be executed directly from non-volatile storage
> directly addressable by the CPU, such as QSPI NOR flash which can
> be found on many RISC-V platforms. This makes way for significant
> optimization of RAM footprint. The XIP kernel is not compressed
> since it has to run directly from flash, so it will occupy more
> space on the non-volatile storage. The physical flash address used
> to link the kernel object files and for storing it has to be known
> at compile time and is represented by a Kconfig option.
>
> XIP on RISC-V will for the time being only work on MMU-enabled
> kernels.
>
> Signed-off-by: Vitaly Wool <[email protected]>
>
> ---
>
> Changes in v2:
> - dedicated macro for XIP address fixup when MMU is not enabled yet
> o both for 32-bit and 64-bit RISC-V
> - SP is explicitly set to a safe place in RAM before __copy_data call
> - removed redundant alignment requirements in vmlinux-xip.lds.S
> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> Changes in v3:
> - rebased against latest for-next
> - XIP address fixup macro now takes an argument
> - SMP related fixes
> Changes in v4:
> - rebased against the current for-next
> - less #ifdef's in C/ASM code
> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> - C-specific definitions moved into #ifndef __ASSEMBLY__
> - Fixed multi-core boot
> Changes in v5:
> - fixed build error for non-XIP kernels
> Changes in v6:
> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> PHYS_RAM_BASE in non-XIP configurations if needed
> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
> effects
> - fixed crash for non-XIP kernels that don't use built-in DTB
So v5 landed on for-next, which generally means it's best to avoid
re-spinning the patch and instead send along fixups. That said, the v5
is causing some testing failures for me.
I'm going to drop the v5 for now as I don't have time to test this
tonight. I'll try and take a look soon, as it will conflict with Alex's
patches.
> arch/riscv/Kconfig | 49 ++++++++++-
> arch/riscv/Makefile | 8 +-
> arch/riscv/boot/Makefile | 13 +++
> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> arch/riscv/kernel/head.S | 49 ++++++++++-
> arch/riscv/kernel/head.h | 3 +
> arch/riscv/kernel/setup.c | 8 +-
> arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++++
> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> 11 files changed, 426 insertions(+), 18 deletions(-)
> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 8ea60a0a19ae..bd6f82240c34 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -441,7 +441,7 @@ config EFI_STUB
>
> config EFI
> bool "UEFI runtime support"
> - depends on OF
> + depends on OF && !XIP_KERNEL
> select LIBFDT
> select UCS2_STRING
> select EFI_PARAMS_FROM_FDT
> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> def_bool y
> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>
> +config PHYS_RAM_BASE_FIXED
> + bool "Explicitly specified physical RAM address"
> + default n
> +
> +config PHYS_RAM_BASE
> + hex "Platform Physical RAM address"
> + depends on PHYS_RAM_BASE_FIXED
> + default "0x80000000"
> + help
> + This is the physical address of RAM in the system. It has to be
> + explicitly specified to run early relocations of read-write data
> + from flash to RAM.
> +
> +config XIP_KERNEL
> + bool "Kernel Execute-In-Place from ROM"
> + depends on MMU
> + select PHYS_RAM_BASE_FIXED
> + help
> + Execute-In-Place allows the kernel to run from non-volatile storage
> + directly addressable by the CPU, such as NOR flash. This saves RAM
> + space since the text section of the kernel is not loaded from flash
> + to RAM. Read-write sections, such as the data section and stack,
> + are still copied to RAM. The XIP kernel is not compressed since
> + it has to run directly from flash, so it will take more space to
> + store it. The flash address used to link the kernel object files,
> + and for storing it, is configuration dependent. Therefore, if you
> + say Y here, you must know the proper physical address where to
> + store the kernel image depending on your own flash memory usage.
> +
> + Also note that the make target becomes "make xipImage" rather than
> + "make zImage" or "make Image". The final kernel binary to put in
> + ROM memory will be arch/riscv/boot/xipImage.
> +
> + If unsure, say N.
> +
> +config XIP_PHYS_ADDR
> + hex "XIP Kernel Physical Location"
> + depends on XIP_KERNEL
> + default "0x21000000"
> + help
> + This is the physical address in your flash memory the kernel will
> + be linked for and stored to. This address is dependent on your
> + own flash usage.
> +
> endmenu
>
> config BUILTIN_DTB
> - def_bool n
> + bool
> depends on OF
> + default y if XIP_KERNEL
>
> menu "Power management options"
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index 1368d943f1f3..8fcbec03974d 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>
> # Default target when executing plain make
> boot := arch/riscv/boot
> +ifeq ($(CONFIG_XIP_KERNEL),y)
> +KBUILD_IMAGE := $(boot)/xipImage
> +else
> KBUILD_IMAGE := $(boot)/Image.gz
> +endif
>
> head-y := arch/riscv/kernel/head.o
>
> @@ -95,12 +99,14 @@ PHONY += vdso_install
> vdso_install:
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>
> +ifneq ($(CONFIG_XIP_KERNEL),y)
> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> KBUILD_IMAGE := $(boot)/loader.bin
> else
> KBUILD_IMAGE := $(boot)/Image.gz
> endif
> -BOOT_TARGETS := Image Image.gz loader loader.bin
> +endif
> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>
> all: $(notdir $(KBUILD_IMAGE))
>
> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> index 03404c84f971..6bf299f70c27 100644
> --- a/arch/riscv/boot/Makefile
> +++ b/arch/riscv/boot/Makefile
> @@ -17,8 +17,21 @@
> KCOV_INSTRUMENT := n
>
> OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
>
> targets := Image Image.* loader loader.o loader.lds loader.bin
> +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
> +
> +ifeq ($(CONFIG_XIP_KERNEL),y)
> +
> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> +cmd_mkxip = $(cmd_objcopy)
> +
> +$(obj)/xipImage: vmlinux FORCE
> + $(call if_changed,mkxip)
> + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
> +
> +endif
>
> $(obj)/Image: vmlinux FORCE
> $(call if_changed,objcopy)
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index ebf817c1bdf4..21a9b2f8d1c7 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -11,6 +11,33 @@
>
> #include <asm/pgtable-bits.h>
>
> +#ifdef CONFIG_MMU
> +
> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +
> +#ifdef CONFIG_XIP_KERNEL
> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> +
> +#define XIP_OFFSET SZ_8M
> +#define XIP_MASK (SZ_8M - 1)
> +#define XIP_VIRT_ADDR(physaddr) \
> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> +
> +#else
> +
> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> +#define VMALLOC_END (PAGE_OFFSET - 1)
> +
> +#endif /* CONFIG_XIP_KERNEL */
> +
> +#else
> +
> +#ifdef CONFIG_XIP_KERNEL
> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> +#endif /* CONFIG_XIP_KERNEL */
> +#endif /* CONFIG_MMU */
> +
> #ifndef __ASSEMBLY__
>
> /* Page Upper Directory not used in RISC-V */
> @@ -21,9 +48,25 @@
>
> #ifdef CONFIG_MMU
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +#ifdef CONFIG_XIP_KERNEL
> +/*
> + * Since we use sections to map it, this macro replaces the physical address
> + * with its virtual address while keeping offset from the base section.
> + */
> +#define XIP_PHYS_ADDR(va) \
> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
> +
> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> +
> +#define XIP_FIXUP(addr) ({ \
> + uintptr_t __a = (uintptr_t)(addr); \
> + (__a >= CONFIG_XIP_PHYS_ADDR && \
> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET : __a; \
> +})
> +#else
> +#define XIP_FIXUP(addr) (addr)
> +#endif /* CONFIG_XIP_KERNEL */
>
> #define BPF_JIT_REGION_SIZE (SZ_128M)
> #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> @@ -484,8 +527,20 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
>
> #define kern_addr_valid(addr) (1) /* FIXME */
>
> -extern void *dtb_early_va;
> -extern uintptr_t dtb_early_pa;
> +extern void *_dtb_early_va;
> +extern uintptr_t _dtb_early_pa;
> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> +
> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> +
> +#else
> +
> +#define dtb_early_va _dtb_early_va
> +#define dtb_early_pa _dtb_early_pa
> +
> +#endif /* CONFIG_XIP_KERNEL */
> +
> void setup_bootmem(void);
> void paging_init(void);
> void misc_mem_init(void);
> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
> index 685fae72b7f5..2413c2997350 100644
> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned long hartid)
> }
> #endif
>
> +static inline unsigned long get_secondary_start_phys(void)
> +{
> +#ifdef CONFIG_XIP_KERNEL
> + return XIP_PHYS_ADDR(secondary_start_sbi);
> +#else
> + return __pa_symbol(secondary_start_sbi);
> +#endif
> +}
> +
> static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
> {
> int rc;
> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> + unsigned long boot_addr = get_secondary_start_phys();
> int hartid = cpuid_to_hartid_map(cpuid);
>
> cpu_update_secondary_bootdata(cpuid, tidle);
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index f5a9bad86e58..bbe74e37914f 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -9,11 +9,23 @@
> #include <linux/linkage.h>
> #include <asm/thread_info.h>
> #include <asm/page.h>
> +#include <asm/pgtable.h>
> #include <asm/csr.h>
> #include <asm/hwcap.h>
> #include <asm/image.h>
> #include "efi-header.S"
>
> +#ifdef CONFIG_XIP_KERNEL
> +.macro XIP_FIXUP_OFFSET reg
> + REG_L t0, _xip_fixup
> + add \reg, \reg, t0
> +.endm
> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> +#else
> +.macro XIP_FIXUP_OFFSET reg
> +.endm
> +#endif /* CONFIG_XIP_KERNEL */
> +
> __HEAD
> ENTRY(_start)
> /*
> @@ -69,7 +81,11 @@ pe_head_start:
> #ifdef CONFIG_MMU
> relocate:
> /* Relocate return address */
> +#ifdef CONFIG_XIP_KERNEL
> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> +#else
> li a1, PAGE_OFFSET
> +#endif
> la a2, _start
> sub a1, a1, a2
> add ra, ra, a1
> @@ -91,6 +107,7 @@ relocate:
> * to ensure the new translations are in use.
> */
> la a0, trampoline_pg_dir
> + XIP_FIXUP_OFFSET a0
> srl a0, a0, PAGE_SHIFT
> or a0, a0, a1
> sfence.vma
> @@ -144,7 +161,9 @@ secondary_start_sbi:
>
> slli a3, a0, LGREG
> la a4, __cpu_up_stack_pointer
> + XIP_FIXUP_OFFSET a4
> la a5, __cpu_up_task_pointer
> + XIP_FIXUP_OFFSET a5
> add a4, a3, a4
> add a5, a3, a5
> REG_L sp, (a4)
> @@ -156,6 +175,7 @@ secondary_start_common:
> #ifdef CONFIG_MMU
> /* Enable virtual memory and relocate to virtual address */
> la a0, swapper_pg_dir
> + XIP_FIXUP_OFFSET a0
> call relocate
> #endif
> call setup_trap_vector
> @@ -236,12 +256,33 @@ pmp_done:
> .Lgood_cores:
> #endif
>
> +#ifndef CONFIG_XIP_KERNEL
> /* Pick one hart to run the main boot sequence */
> la a3, hart_lottery
> li a2, 1
> amoadd.w a3, a2, (a3)
> bnez a3, .Lsecondary_start
>
> +#else
> + /* hart_lottery in flash contains a magic number */
> + la a3, hart_lottery
> + mv a2, a3
> + XIP_FIXUP_OFFSET a2
> + lw t1, (a3)
> + amoswap.w t0, t1, (a2)
> + /* first time here if hart_lottery in RAM is not set */
> + beq t0, t1, .Lsecondary_start
> +
> + la sp, _end + THREAD_SIZE
> + XIP_FIXUP_OFFSET sp
> + mv s0, a0
> + call __copy_data
> +
> + /* Restore a0 copy */
> + mv a0, s0
> +#endif
> +
> +#ifndef CONFIG_XIP_KERNEL
> /* Clear BSS for flat non-ELF images */
> la a3, __bss_start
> la a4, __bss_stop
> @@ -251,15 +292,18 @@ clear_bss:
> add a3, a3, RISCV_SZPTR
> blt a3, a4, clear_bss
> clear_bss_done:
> -
> +#endif
> /* Save hart ID and DTB physical address */
> mv s0, a0
> mv s1, a1
> +
> la a2, boot_cpu_hartid
> + XIP_FIXUP_OFFSET a2
> REG_S a0, (a2)
>
> /* Initialize page tables and relocate to virtual addresses */
> la sp, init_thread_union + THREAD_SIZE
> + XIP_FIXUP_OFFSET sp
> #ifdef CONFIG_BUILTIN_DTB
> la a0, __dtb_start
> #else
> @@ -268,6 +312,7 @@ clear_bss_done:
> call setup_vm
> #ifdef CONFIG_MMU
> la a0, early_pg_dir
> + XIP_FIXUP_OFFSET a0
> call relocate
> #endif /* CONFIG_MMU */
>
> @@ -292,7 +337,9 @@ clear_bss_done:
>
> slli a3, a0, LGREG
> la a1, __cpu_up_stack_pointer
> + XIP_FIXUP_OFFSET a1
> la a2, __cpu_up_task_pointer
> + XIP_FIXUP_OFFSET a2
> add a1, a3, a1
> add a2, a3, a2
>
> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> index b48dda3d04f6..aabbc3ac3e48 100644
> --- a/arch/riscv/kernel/head.h
> +++ b/arch/riscv/kernel/head.h
> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>
> asmlinkage void do_page_fault(struct pt_regs *regs);
> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> +#ifdef CONFIG_XIP_KERNEL
> +asmlinkage void __init __copy_data(void);
> +#endif
>
> extern void *__cpu_up_stack_pointer[];
> extern void *__cpu_up_task_pointer[];
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index e85bacff1b50..a0384c72c272 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
> * This is used before the kernel initializes the BSS so it can't be in the
> * BSS.
> */
> -atomic_t hart_lottery __section(".sdata");
> +atomic_t hart_lottery __section(".sdata")
> +#ifdef CONFIG_XIP_KERNEL
> += ATOMIC_INIT(0xC001BEEF)
> +#endif
> +;
> unsigned long boot_cpu_hartid;
> static DEFINE_PER_CPU(struct cpu, cpu_devices);
>
> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> unflatten_and_copy_device_tree();
> #else
> - if (early_init_dt_verify(__va(dtb_early_pa)))
> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> unflatten_device_tree();
> else
> pr_err("No DTB found in kernel mappings\n");
> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
> new file mode 100644
> index 000000000000..9f0f08c34cd3
> --- /dev/null
> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> @@ -0,0 +1,132 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2012 Regents of the University of California
> + * Copyright (C) 2017 SiFive
> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> + */
> +
> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> +/* No __ro_after_init data in the .rodata section - which will always be ro */
> +#define RO_AFTER_INIT_DATA
> +
> +#include <asm/vmlinux.lds.h>
> +#include <asm/page.h>
> +#include <asm/pgtable.h>
> +#include <asm/cache.h>
> +#include <asm/thread_info.h>
> +
> +OUTPUT_ARCH(riscv)
> +ENTRY(_start)
> +
> +jiffies = jiffies_64;
> +
> +SECTIONS
> +{
> + /* Beginning of code and text segment */
> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> + _xiprom = .;
> + _start = .;
> + HEAD_TEXT_SECTION
> + INIT_TEXT_SECTION(PAGE_SIZE)
> + /* we have to discard exit text and such at runtime, not link time */
> + .exit.text :
> + {
> + EXIT_TEXT
> + }
> +
> + .text : {
> + _text = .;
> + _stext = .;
> + TEXT_TEXT
> + SCHED_TEXT
> + CPUIDLE_TEXT
> + LOCK_TEXT
> + KPROBES_TEXT
> + ENTRY_TEXT
> + IRQENTRY_TEXT
> + SOFTIRQENTRY_TEXT
> + *(.fixup)
> + _etext = .;
> + }
> + RO_DATA(L1_CACHE_BYTES)
> + .srodata : {
> + *(.srodata*)
> + }
> + .init.rodata : {
> + INIT_SETUP(16)
> + INIT_CALLS
> + CON_INITCALL
> + INIT_RAM_FS
> + }
> + _exiprom = .; /* End of XIP ROM area */
> +
> +
> +/*
> + * From this point, stuff is considered writable and will be copied to RAM
> + */
> + __data_loc = ALIGN(16); /* location in file */
> + . = PAGE_OFFSET; /* location in memory */
> +
> + _sdata = .; /* Start of data section */
> + _data = .;
> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> + _edata = .;
> + __start_ro_after_init = .;
> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
> + *(.data..ro_after_init)
> + }
> + __end_ro_after_init = .;
> +
> + . = ALIGN(PAGE_SIZE);
> + __init_begin = .;
> + .init.data : {
> + INIT_DATA
> + }
> + .exit.data : {
> + EXIT_DATA
> + }
> + . = ALIGN(8);
> + __soc_early_init_table : {
> + __soc_early_init_table_start = .;
> + KEEP(*(__soc_early_init_table))
> + __soc_early_init_table_end = .;
> + }
> + __soc_builtin_dtb_table : {
> + __soc_builtin_dtb_table_start = .;
> + KEEP(*(__soc_builtin_dtb_table))
> + __soc_builtin_dtb_table_end = .;
> + }
> + PERCPU_SECTION(L1_CACHE_BYTES)
> +
> + . = ALIGN(PAGE_SIZE);
> + __init_end = .;
> +
> + .sdata : {
> + __global_pointer$ = . + 0x800;
> + *(.sdata*)
> + *(.sbss*)
> + }
> +
> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> + EXCEPTION_TABLE(0x10)
> +
> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> + *(.rel.dyn*)
> + }
> +
> + /*
> + * End of copied data. We need a dummy section to get its LMA.
> + * Also located before final ALIGN() as trailing padding is not stored
> + * in the resulting binary file and useless to copy.
> + */
> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> + _edata_loc = LOADADDR(.data.endmark);
> +
> + . = ALIGN(PAGE_SIZE);
> + _end = .;
> +
> + STABS_DEBUG
> + DWARF_DEBUG
> +
> + DISCARDS
> +}
> diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> index de03cb22d0e9..6745ec325930 100644
> --- a/arch/riscv/kernel/vmlinux.lds.S
> +++ b/arch/riscv/kernel/vmlinux.lds.S
> @@ -4,7 +4,12 @@
> * Copyright (C) 2017 SiFive
> */
>
> +#ifdef CONFIG_XIP_KERNEL
> +#include "vmlinux-xip.lds.S"
> +#else
> +
> #define LOAD_OFFSET PAGE_OFFSET
> +
> #include <asm/vmlinux.lds.h>
> #include <asm/page.h>
> #include <asm/cache.h>
> @@ -132,3 +137,4 @@ SECTIONS
>
> DISCARDS
> }
> +#endif /* CONFIG_XIP_KERNEL */
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 7f5036fbee8c..efe649d41f95 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>
> extern char _start[];
> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> -void *dtb_early_va __initdata;
> -uintptr_t dtb_early_pa __initdata;
> +void *_dtb_early_va __initdata;
> +uintptr_t _dtb_early_pa __initdata;
>
> struct pt_alloc_ops {
> pte_t *(*get_pte_virt)(phys_addr_t pa);
> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> (unsigned long)VMALLOC_END);
> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> (unsigned long)high_memory);
> +#ifdef CONFIG_XIP_KERNEL
> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> +#endif /* CONFIG_XIP_KERNEL */
> }
> #else
> static void print_vm_layout(void) { }
> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> phys_addr_t dram_end = memblock_end_of_DRAM();
> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>
> +#ifdef CONFIG_XIP_KERNEL
> + vmlinux_start = __pa_symbol(&_sdata);
> +#endif
> +
> /* The maximal physical memory size is -PAGE_OFFSET. */
> memblock_enforce_memory_limit(-PAGE_OFFSET);
>
> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> memblock_allow_resize();
> }
>
> +#ifdef CONFIG_XIP_KERNEL
> +
> +extern char _xiprom[], _exiprom[];
> +extern char _sdata[], _edata[];
> +
> +#endif /* CONFIG_XIP_KERNEL */
> +
> #ifdef CONFIG_MMU
> -static struct pt_alloc_ops pt_ops;
> +static struct pt_alloc_ops _pt_ops;
> +
> +#ifdef CONFIG_XIP_KERNEL
> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> +#else
> +#define pt_ops _pt_ops
> +#endif
>
> unsigned long va_pa_offset;
> EXPORT_SYMBOL(va_pa_offset);
> +#ifdef CONFIG_XIP_KERNEL
> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
> +#endif
> unsigned long pfn_base;
> EXPORT_SYMBOL(pfn_base);
>
> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
>
> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
>
> +#ifdef CONFIG_XIP_KERNEL
> +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> +#endif /* CONFIG_XIP_KERNEL */
> +
> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
> {
> unsigned long addr = __fix_to_virt(idx);
> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>
> +#ifdef CONFIG_XIP_KERNEL
> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> +
> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> +#endif /* CONFIG_XIP_KERNEL */
> +
> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> {
> /* Before MMU is enabled */
> @@ -354,6 +393,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> return PMD_SIZE;
> }
>
> +#ifdef CONFIG_XIP_KERNEL
> +/* called from head.S with MMU off */
> +asmlinkage void __init __copy_data(void)
> +{
> + void *from = (void *)(&_sdata);
> + void *end = (void *)(&_end);
> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> + size_t sz = (size_t)(end - from);
> +
> + memcpy(to, from, sz);
> +}
> +#endif
> +
> /*
> * setup_vm() is called from head.S with MMU-off.
> *
> @@ -374,7 +426,8 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
>
> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> {
> - uintptr_t va, pa, end_va;
> + uintptr_t va, end_va;
> + uintptr_t __maybe_unused pa;
> uintptr_t load_pa = (uintptr_t)(&_start);
> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> uintptr_t map_size;
> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> #endif
>
> +#ifdef CONFIG_XIP_KERNEL
> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> +
> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> +#endif
> va_pa_offset = PAGE_OFFSET - load_pa;
> pfn_base = PFN_DOWN(load_pa);
>
> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> #endif
>
> +#ifdef CONFIG_XIP_KERNEL
> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> + for (va = XIP_VIRT_ADDR_START;
> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> + va += PMD_SIZE) {
> + create_pmd_mapping(xip_pmd, va,
> + xiprom + (va - XIP_VIRT_ADDR_START),
> + PMD_SIZE, PAGE_KERNEL_EXEC);
> + }
> +
> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> +#endif
> +
> /*
> * Setup early PGD covering entire kernel which will allows
> * us to reach paging_init(). We map all memory banks later
> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
> #else /* CONFIG_BUILTIN_DTB */
> - dtb_early_va = __va(dtb_pa);
> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> #endif /* CONFIG_BUILTIN_DTB */
> #else
> #ifndef CONFIG_BUILTIN_DTB
> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
> #else /* CONFIG_BUILTIN_DTB */
> - dtb_early_va = __va(dtb_pa);
> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> #endif /* CONFIG_BUILTIN_DTB */
> #endif
> dtb_early_pa = dtb_pa;
> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> uintptr_t va, map_size;
> phys_addr_t pa, start, end;
> u64 i;
> +#ifdef CONFIG_XIP_KERNEL
> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> +#endif
>
> /**
> * MMU is enabled at this point. But page table setup is not complete yet.
> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> map_size, PAGE_KERNEL_EXEC);
> }
> }
> +#ifdef CONFIG_XIP_KERNEL
> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> + for (va = XIP_VIRT_ADDR_START;
> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> + va += map_size)
> + create_pgd_mapping(swapper_pg_dir, va,
> + CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
> + map_size, PAGE_KERNEL_EXEC);
> +
> +#endif
>
> /* Clear fixmap PTE and PMD mappings */
> clear_fixmap(FIX_PTE);
On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt <[email protected]> wrote:
>
> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected] wrote:
> > Introduce XIP (eXecute In Place) support for RISC-V platforms.
> > It allows code to be executed directly from non-volatile storage
> > directly addressable by the CPU, such as QSPI NOR flash which can
> > be found on many RISC-V platforms. This makes way for significant
> > optimization of RAM footprint. The XIP kernel is not compressed
> > since it has to run directly from flash, so it will occupy more
> > space on the non-volatile storage. The physical flash address used
> > to link the kernel object files and for storing it has to be known
> > at compile time and is represented by a Kconfig option.
> >
> > XIP on RISC-V will for the time being only work on MMU-enabled
> > kernels.
> >
> > Signed-off-by: Vitaly Wool <[email protected]>
> >
> > ---
> >
> > Changes in v2:
> > - dedicated macro for XIP address fixup when MMU is not enabled yet
> > o both for 32-bit and 64-bit RISC-V
> > - SP is explicitly set to a safe place in RAM before __copy_data call
> > - removed redundant alignment requirements in vmlinux-xip.lds.S
> > - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> > Changes in v3:
> > - rebased against latest for-next
> > - XIP address fixup macro now takes an argument
> > - SMP related fixes
> > Changes in v4:
> > - rebased against the current for-next
> > - less #ifdef's in C/ASM code
> > - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> > - C-specific definitions moved into #ifndef __ASSEMBLY__
> > - Fixed multi-core boot
> > Changes in v5:
> > - fixed build error for non-XIP kernels
> > Changes in v6:
> > - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> > - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> > PHYS_RAM_BASE in non-XIP configurations if needed
> > - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
> > effects
> > - fixed crash for non-XIP kernels that don't use built-in DTB
>
> So v5 landed on for-next, which generally means it's best to avoid
> re-spinning the patch and instead send along fixups. That said, the v5
> is causing some testing failures for me.
>
> I'm going to drop the v5 for now as I don't have time to test this
> tonight. I'll try and take a look soon, as it will conflict with Alex's
> patches.
I can come up with the incremental patch instead pretty much straight
away if that works better.
~Vitaly
> > arch/riscv/Kconfig | 49 ++++++++++-
> > arch/riscv/Makefile | 8 +-
> > arch/riscv/boot/Makefile | 13 +++
> > arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> > arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> > arch/riscv/kernel/head.S | 49 ++++++++++-
> > arch/riscv/kernel/head.h | 3 +
> > arch/riscv/kernel/setup.c | 8 +-
> > arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++++
> > arch/riscv/kernel/vmlinux.lds.S | 6 ++
> > arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> > 11 files changed, 426 insertions(+), 18 deletions(-)
> > create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index 8ea60a0a19ae..bd6f82240c34 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -441,7 +441,7 @@ config EFI_STUB
> >
> > config EFI
> > bool "UEFI runtime support"
> > - depends on OF
> > + depends on OF && !XIP_KERNEL
> > select LIBFDT
> > select UCS2_STRING
> > select EFI_PARAMS_FROM_FDT
> > @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> > def_bool y
> > depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
> >
> > +config PHYS_RAM_BASE_FIXED
> > + bool "Explicitly specified physical RAM address"
> > + default n
> > +
> > +config PHYS_RAM_BASE
> > + hex "Platform Physical RAM address"
> > + depends on PHYS_RAM_BASE_FIXED
> > + default "0x80000000"
> > + help
> > + This is the physical address of RAM in the system. It has to be
> > + explicitly specified to run early relocations of read-write data
> > + from flash to RAM.
> > +
> > +config XIP_KERNEL
> > + bool "Kernel Execute-In-Place from ROM"
> > + depends on MMU
> > + select PHYS_RAM_BASE_FIXED
> > + help
> > + Execute-In-Place allows the kernel to run from non-volatile storage
> > + directly addressable by the CPU, such as NOR flash. This saves RAM
> > + space since the text section of the kernel is not loaded from flash
> > + to RAM. Read-write sections, such as the data section and stack,
> > + are still copied to RAM. The XIP kernel is not compressed since
> > + it has to run directly from flash, so it will take more space to
> > + store it. The flash address used to link the kernel object files,
> > + and for storing it, is configuration dependent. Therefore, if you
> > + say Y here, you must know the proper physical address where to
> > + store the kernel image depending on your own flash memory usage.
> > +
> > + Also note that the make target becomes "make xipImage" rather than
> > + "make zImage" or "make Image". The final kernel binary to put in
> > + ROM memory will be arch/riscv/boot/xipImage.
> > +
> > + If unsure, say N.
> > +
> > +config XIP_PHYS_ADDR
> > + hex "XIP Kernel Physical Location"
> > + depends on XIP_KERNEL
> > + default "0x21000000"
> > + help
> > + This is the physical address in your flash memory the kernel will
> > + be linked for and stored to. This address is dependent on your
> > + own flash usage.
> > +
> > endmenu
> >
> > config BUILTIN_DTB
> > - def_bool n
> > + bool
> > depends on OF
> > + default y if XIP_KERNEL
> >
> > menu "Power management options"
> >
> > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > index 1368d943f1f3..8fcbec03974d 100644
> > --- a/arch/riscv/Makefile
> > +++ b/arch/riscv/Makefile
> > @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >
> > # Default target when executing plain make
> > boot := arch/riscv/boot
> > +ifeq ($(CONFIG_XIP_KERNEL),y)
> > +KBUILD_IMAGE := $(boot)/xipImage
> > +else
> > KBUILD_IMAGE := $(boot)/Image.gz
> > +endif
> >
> > head-y := arch/riscv/kernel/head.o
> >
> > @@ -95,12 +99,14 @@ PHONY += vdso_install
> > vdso_install:
> > $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> >
> > +ifneq ($(CONFIG_XIP_KERNEL),y)
> > ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> > KBUILD_IMAGE := $(boot)/loader.bin
> > else
> > KBUILD_IMAGE := $(boot)/Image.gz
> > endif
> > -BOOT_TARGETS := Image Image.gz loader loader.bin
> > +endif
> > +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> >
> > all: $(notdir $(KBUILD_IMAGE))
> >
> > diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> > index 03404c84f971..6bf299f70c27 100644
> > --- a/arch/riscv/boot/Makefile
> > +++ b/arch/riscv/boot/Makefile
> > @@ -17,8 +17,21 @@
> > KCOV_INSTRUMENT := n
> >
> > OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> > +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> >
> > targets := Image Image.* loader loader.o loader.lds loader.bin
> > +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
> > +
> > +ifeq ($(CONFIG_XIP_KERNEL),y)
> > +
> > +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> > +cmd_mkxip = $(cmd_objcopy)
> > +
> > +$(obj)/xipImage: vmlinux FORCE
> > + $(call if_changed,mkxip)
> > + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
> > +
> > +endif
> >
> > $(obj)/Image: vmlinux FORCE
> > $(call if_changed,objcopy)
> > diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> > index ebf817c1bdf4..21a9b2f8d1c7 100644
> > --- a/arch/riscv/include/asm/pgtable.h
> > +++ b/arch/riscv/include/asm/pgtable.h
> > @@ -11,6 +11,33 @@
> >
> > #include <asm/pgtable-bits.h>
> >
> > +#ifdef CONFIG_MMU
> > +
> > +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > +
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> > +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> > +
> > +#define XIP_OFFSET SZ_8M
> > +#define XIP_MASK (SZ_8M - 1)
> > +#define XIP_VIRT_ADDR(physaddr) \
> > + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> > +
> > +#else
> > +
> > +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > +#define VMALLOC_END (PAGE_OFFSET - 1)
> > +
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > +#else
> > +
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> > +#endif /* CONFIG_XIP_KERNEL */
> > +#endif /* CONFIG_MMU */
> > +
> > #ifndef __ASSEMBLY__
> >
> > /* Page Upper Directory not used in RISC-V */
> > @@ -21,9 +48,25 @@
> >
> > #ifdef CONFIG_MMU
> >
> > -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > -#define VMALLOC_END (PAGE_OFFSET - 1)
> > -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > +#ifdef CONFIG_XIP_KERNEL
> > +/*
> > + * Since we use sections to map it, this macro replaces the physical address
> > + * with its virtual address while keeping offset from the base section.
> > + */
> > +#define XIP_PHYS_ADDR(va) \
> > + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
> > +
> > +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > +
> > +#define XIP_FIXUP(addr) ({ \
> > + uintptr_t __a = (uintptr_t)(addr); \
> > + (__a >= CONFIG_XIP_PHYS_ADDR && \
> > + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> > + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET : __a; \
> > +})
> > +#else
> > +#define XIP_FIXUP(addr) (addr)
> > +#endif /* CONFIG_XIP_KERNEL */
> >
> > #define BPF_JIT_REGION_SIZE (SZ_128M)
> > #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > @@ -484,8 +527,20 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
> >
> > #define kern_addr_valid(addr) (1) /* FIXME */
> >
> > -extern void *dtb_early_va;
> > -extern uintptr_t dtb_early_pa;
> > +extern void *_dtb_early_va;
> > +extern uintptr_t _dtb_early_pa;
> > +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> > +
> > +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> > +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> > +
> > +#else
> > +
> > +#define dtb_early_va _dtb_early_va
> > +#define dtb_early_pa _dtb_early_pa
> > +
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > void setup_bootmem(void);
> > void paging_init(void);
> > void misc_mem_init(void);
> > diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
> > index 685fae72b7f5..2413c2997350 100644
> > --- a/arch/riscv/kernel/cpu_ops_sbi.c
> > +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> > @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned long hartid)
> > }
> > #endif
> >
> > +static inline unsigned long get_secondary_start_phys(void)
> > +{
> > +#ifdef CONFIG_XIP_KERNEL
> > + return XIP_PHYS_ADDR(secondary_start_sbi);
> > +#else
> > + return __pa_symbol(secondary_start_sbi);
> > +#endif
> > +}
> > +
> > static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
> > {
> > int rc;
> > - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> > + unsigned long boot_addr = get_secondary_start_phys();
> > int hartid = cpuid_to_hartid_map(cpuid);
> >
> > cpu_update_secondary_bootdata(cpuid, tidle);
> > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > index f5a9bad86e58..bbe74e37914f 100644
> > --- a/arch/riscv/kernel/head.S
> > +++ b/arch/riscv/kernel/head.S
> > @@ -9,11 +9,23 @@
> > #include <linux/linkage.h>
> > #include <asm/thread_info.h>
> > #include <asm/page.h>
> > +#include <asm/pgtable.h>
> > #include <asm/csr.h>
> > #include <asm/hwcap.h>
> > #include <asm/image.h>
> > #include "efi-header.S"
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +.macro XIP_FIXUP_OFFSET reg
> > + REG_L t0, _xip_fixup
> > + add \reg, \reg, t0
> > +.endm
> > +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> > +#else
> > +.macro XIP_FIXUP_OFFSET reg
> > +.endm
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > __HEAD
> > ENTRY(_start)
> > /*
> > @@ -69,7 +81,11 @@ pe_head_start:
> > #ifdef CONFIG_MMU
> > relocate:
> > /* Relocate return address */
> > +#ifdef CONFIG_XIP_KERNEL
> > + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > +#else
> > li a1, PAGE_OFFSET
> > +#endif
> > la a2, _start
> > sub a1, a1, a2
> > add ra, ra, a1
> > @@ -91,6 +107,7 @@ relocate:
> > * to ensure the new translations are in use.
> > */
> > la a0, trampoline_pg_dir
> > + XIP_FIXUP_OFFSET a0
> > srl a0, a0, PAGE_SHIFT
> > or a0, a0, a1
> > sfence.vma
> > @@ -144,7 +161,9 @@ secondary_start_sbi:
> >
> > slli a3, a0, LGREG
> > la a4, __cpu_up_stack_pointer
> > + XIP_FIXUP_OFFSET a4
> > la a5, __cpu_up_task_pointer
> > + XIP_FIXUP_OFFSET a5
> > add a4, a3, a4
> > add a5, a3, a5
> > REG_L sp, (a4)
> > @@ -156,6 +175,7 @@ secondary_start_common:
> > #ifdef CONFIG_MMU
> > /* Enable virtual memory and relocate to virtual address */
> > la a0, swapper_pg_dir
> > + XIP_FIXUP_OFFSET a0
> > call relocate
> > #endif
> > call setup_trap_vector
> > @@ -236,12 +256,33 @@ pmp_done:
> > .Lgood_cores:
> > #endif
> >
> > +#ifndef CONFIG_XIP_KERNEL
> > /* Pick one hart to run the main boot sequence */
> > la a3, hart_lottery
> > li a2, 1
> > amoadd.w a3, a2, (a3)
> > bnez a3, .Lsecondary_start
> >
> > +#else
> > + /* hart_lottery in flash contains a magic number */
> > + la a3, hart_lottery
> > + mv a2, a3
> > + XIP_FIXUP_OFFSET a2
> > + lw t1, (a3)
> > + amoswap.w t0, t1, (a2)
> > + /* first time here if hart_lottery in RAM is not set */
> > + beq t0, t1, .Lsecondary_start
> > +
> > + la sp, _end + THREAD_SIZE
> > + XIP_FIXUP_OFFSET sp
> > + mv s0, a0
> > + call __copy_data
> > +
> > + /* Restore a0 copy */
> > + mv a0, s0
> > +#endif
> > +
> > +#ifndef CONFIG_XIP_KERNEL
> > /* Clear BSS for flat non-ELF images */
> > la a3, __bss_start
> > la a4, __bss_stop
> > @@ -251,15 +292,18 @@ clear_bss:
> > add a3, a3, RISCV_SZPTR
> > blt a3, a4, clear_bss
> > clear_bss_done:
> > -
> > +#endif
> > /* Save hart ID and DTB physical address */
> > mv s0, a0
> > mv s1, a1
> > +
> > la a2, boot_cpu_hartid
> > + XIP_FIXUP_OFFSET a2
> > REG_S a0, (a2)
> >
> > /* Initialize page tables and relocate to virtual addresses */
> > la sp, init_thread_union + THREAD_SIZE
> > + XIP_FIXUP_OFFSET sp
> > #ifdef CONFIG_BUILTIN_DTB
> > la a0, __dtb_start
> > #else
> > @@ -268,6 +312,7 @@ clear_bss_done:
> > call setup_vm
> > #ifdef CONFIG_MMU
> > la a0, early_pg_dir
> > + XIP_FIXUP_OFFSET a0
> > call relocate
> > #endif /* CONFIG_MMU */
> >
> > @@ -292,7 +337,9 @@ clear_bss_done:
> >
> > slli a3, a0, LGREG
> > la a1, __cpu_up_stack_pointer
> > + XIP_FIXUP_OFFSET a1
> > la a2, __cpu_up_task_pointer
> > + XIP_FIXUP_OFFSET a2
> > add a1, a3, a1
> > add a2, a3, a2
> >
> > diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> > index b48dda3d04f6..aabbc3ac3e48 100644
> > --- a/arch/riscv/kernel/head.h
> > +++ b/arch/riscv/kernel/head.h
> > @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> >
> > asmlinkage void do_page_fault(struct pt_regs *regs);
> > asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> > +#ifdef CONFIG_XIP_KERNEL
> > +asmlinkage void __init __copy_data(void);
> > +#endif
> >
> > extern void *__cpu_up_stack_pointer[];
> > extern void *__cpu_up_task_pointer[];
> > diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> > index e85bacff1b50..a0384c72c272 100644
> > --- a/arch/riscv/kernel/setup.c
> > +++ b/arch/riscv/kernel/setup.c
> > @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
> > * This is used before the kernel initializes the BSS so it can't be in the
> > * BSS.
> > */
> > -atomic_t hart_lottery __section(".sdata");
> > +atomic_t hart_lottery __section(".sdata")
> > +#ifdef CONFIG_XIP_KERNEL
> > += ATOMIC_INIT(0xC001BEEF)
> > +#endif
> > +;
> > unsigned long boot_cpu_hartid;
> > static DEFINE_PER_CPU(struct cpu, cpu_devices);
> >
> > @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> > #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> > unflatten_and_copy_device_tree();
> > #else
> > - if (early_init_dt_verify(__va(dtb_early_pa)))
> > + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> > unflatten_device_tree();
> > else
> > pr_err("No DTB found in kernel mappings\n");
> > diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
> > new file mode 100644
> > index 000000000000..9f0f08c34cd3
> > --- /dev/null
> > +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> > @@ -0,0 +1,132 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2012 Regents of the University of California
> > + * Copyright (C) 2017 SiFive
> > + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> > + */
> > +
> > +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > +/* No __ro_after_init data in the .rodata section - which will always be ro */
> > +#define RO_AFTER_INIT_DATA
> > +
> > +#include <asm/vmlinux.lds.h>
> > +#include <asm/page.h>
> > +#include <asm/pgtable.h>
> > +#include <asm/cache.h>
> > +#include <asm/thread_info.h>
> > +
> > +OUTPUT_ARCH(riscv)
> > +ENTRY(_start)
> > +
> > +jiffies = jiffies_64;
> > +
> > +SECTIONS
> > +{
> > + /* Beginning of code and text segment */
> > + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> > + _xiprom = .;
> > + _start = .;
> > + HEAD_TEXT_SECTION
> > + INIT_TEXT_SECTION(PAGE_SIZE)
> > + /* we have to discard exit text and such at runtime, not link time */
> > + .exit.text :
> > + {
> > + EXIT_TEXT
> > + }
> > +
> > + .text : {
> > + _text = .;
> > + _stext = .;
> > + TEXT_TEXT
> > + SCHED_TEXT
> > + CPUIDLE_TEXT
> > + LOCK_TEXT
> > + KPROBES_TEXT
> > + ENTRY_TEXT
> > + IRQENTRY_TEXT
> > + SOFTIRQENTRY_TEXT
> > + *(.fixup)
> > + _etext = .;
> > + }
> > + RO_DATA(L1_CACHE_BYTES)
> > + .srodata : {
> > + *(.srodata*)
> > + }
> > + .init.rodata : {
> > + INIT_SETUP(16)
> > + INIT_CALLS
> > + CON_INITCALL
> > + INIT_RAM_FS
> > + }
> > + _exiprom = .; /* End of XIP ROM area */
> > +
> > +
> > +/*
> > + * From this point, stuff is considered writable and will be copied to RAM
> > + */
> > + __data_loc = ALIGN(16); /* location in file */
> > + . = PAGE_OFFSET; /* location in memory */
> > +
> > + _sdata = .; /* Start of data section */
> > + _data = .;
> > + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> > + _edata = .;
> > + __start_ro_after_init = .;
> > + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
> > + *(.data..ro_after_init)
> > + }
> > + __end_ro_after_init = .;
> > +
> > + . = ALIGN(PAGE_SIZE);
> > + __init_begin = .;
> > + .init.data : {
> > + INIT_DATA
> > + }
> > + .exit.data : {
> > + EXIT_DATA
> > + }
> > + . = ALIGN(8);
> > + __soc_early_init_table : {
> > + __soc_early_init_table_start = .;
> > + KEEP(*(__soc_early_init_table))
> > + __soc_early_init_table_end = .;
> > + }
> > + __soc_builtin_dtb_table : {
> > + __soc_builtin_dtb_table_start = .;
> > + KEEP(*(__soc_builtin_dtb_table))
> > + __soc_builtin_dtb_table_end = .;
> > + }
> > + PERCPU_SECTION(L1_CACHE_BYTES)
> > +
> > + . = ALIGN(PAGE_SIZE);
> > + __init_end = .;
> > +
> > + .sdata : {
> > + __global_pointer$ = . + 0x800;
> > + *(.sdata*)
> > + *(.sbss*)
> > + }
> > +
> > + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> > + EXCEPTION_TABLE(0x10)
> > +
> > + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> > + *(.rel.dyn*)
> > + }
> > +
> > + /*
> > + * End of copied data. We need a dummy section to get its LMA.
> > + * Also located before final ALIGN() as trailing padding is not stored
> > + * in the resulting binary file and useless to copy.
> > + */
> > + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> > + _edata_loc = LOADADDR(.data.endmark);
> > +
> > + . = ALIGN(PAGE_SIZE);
> > + _end = .;
> > +
> > + STABS_DEBUG
> > + DWARF_DEBUG
> > +
> > + DISCARDS
> > +}
> > diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> > index de03cb22d0e9..6745ec325930 100644
> > --- a/arch/riscv/kernel/vmlinux.lds.S
> > +++ b/arch/riscv/kernel/vmlinux.lds.S
> > @@ -4,7 +4,12 @@
> > * Copyright (C) 2017 SiFive
> > */
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +#include "vmlinux-xip.lds.S"
> > +#else
> > +
> > #define LOAD_OFFSET PAGE_OFFSET
> > +
> > #include <asm/vmlinux.lds.h>
> > #include <asm/page.h>
> > #include <asm/cache.h>
> > @@ -132,3 +137,4 @@ SECTIONS
> >
> > DISCARDS
> > }
> > +#endif /* CONFIG_XIP_KERNEL */
> > diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> > index 7f5036fbee8c..efe649d41f95 100644
> > --- a/arch/riscv/mm/init.c
> > +++ b/arch/riscv/mm/init.c
> > @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >
> > extern char _start[];
> > #define DTB_EARLY_BASE_VA PGDIR_SIZE
> > -void *dtb_early_va __initdata;
> > -uintptr_t dtb_early_pa __initdata;
> > +void *_dtb_early_va __initdata;
> > +uintptr_t _dtb_early_pa __initdata;
> >
> > struct pt_alloc_ops {
> > pte_t *(*get_pte_virt)(phys_addr_t pa);
> > @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> > (unsigned long)VMALLOC_END);
> > print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> > (unsigned long)high_memory);
> > +#ifdef CONFIG_XIP_KERNEL
> > + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> > + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> > +#endif /* CONFIG_XIP_KERNEL */
> > }
> > #else
> > static void print_vm_layout(void) { }
> > @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> > phys_addr_t dram_end = memblock_end_of_DRAM();
> > phys_addr_t max_mapped_addr = __pa(~(ulong)0);
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + vmlinux_start = __pa_symbol(&_sdata);
> > +#endif
> > +
> > /* The maximal physical memory size is -PAGE_OFFSET. */
> > memblock_enforce_memory_limit(-PAGE_OFFSET);
> >
> > @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> > memblock_allow_resize();
> > }
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +
> > +extern char _xiprom[], _exiprom[];
> > +extern char _sdata[], _edata[];
> > +
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > #ifdef CONFIG_MMU
> > -static struct pt_alloc_ops pt_ops;
> > +static struct pt_alloc_ops _pt_ops;
> > +
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> > +#else
> > +#define pt_ops _pt_ops
> > +#endif
> >
> > unsigned long va_pa_offset;
> > EXPORT_SYMBOL(va_pa_offset);
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
> > +#endif
> > unsigned long pfn_base;
> > EXPORT_SYMBOL(pfn_base);
> >
> > @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> >
> > pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
> > +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> > +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
> > {
> > unsigned long addr = __fix_to_virt(idx);
> > @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> > pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > +
> > +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> > +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> > +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> > +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> > {
> > /* Before MMU is enabled */
> > @@ -354,6 +393,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> > return PMD_SIZE;
> > }
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +/* called from head.S with MMU off */
> > +asmlinkage void __init __copy_data(void)
> > +{
> > + void *from = (void *)(&_sdata);
> > + void *end = (void *)(&_end);
> > + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> > + size_t sz = (size_t)(end - from);
> > +
> > + memcpy(to, from, sz);
> > +}
> > +#endif
> > +
> > /*
> > * setup_vm() is called from head.S with MMU-off.
> > *
> > @@ -374,7 +426,8 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> >
> > asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > {
> > - uintptr_t va, pa, end_va;
> > + uintptr_t va, end_va;
> > + uintptr_t __maybe_unused pa;
> > uintptr_t load_pa = (uintptr_t)(&_start);
> > uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> > uintptr_t map_size;
> > @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > pmd_t fix_bmap_spmd, fix_bmap_epmd;
> > #endif
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> > + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> > +
> > + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> > + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> > +#endif
> > va_pa_offset = PAGE_OFFSET - load_pa;
> > pfn_base = PFN_DOWN(load_pa);
> >
> > @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> > #endif
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> > + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> > + for (va = XIP_VIRT_ADDR_START;
> > + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > + va += PMD_SIZE) {
> > + create_pmd_mapping(xip_pmd, va,
> > + xiprom + (va - XIP_VIRT_ADDR_START),
> > + PMD_SIZE, PAGE_KERNEL_EXEC);
> > + }
> > +
> > + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> > + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> > +#endif
> > +
> > /*
> > * Setup early PGD covering entire kernel which will allows
> > * us to reach paging_init(). We map all memory banks later
> > @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> > dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
> > #else /* CONFIG_BUILTIN_DTB */
> > - dtb_early_va = __va(dtb_pa);
> > + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> > #endif /* CONFIG_BUILTIN_DTB */
> > #else
> > #ifndef CONFIG_BUILTIN_DTB
> > @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
> > dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
> > #else /* CONFIG_BUILTIN_DTB */
> > - dtb_early_va = __va(dtb_pa);
> > + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> > #endif /* CONFIG_BUILTIN_DTB */
> > #endif
> > dtb_early_pa = dtb_pa;
> > @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> > uintptr_t va, map_size;
> > phys_addr_t pa, start, end;
> > u64 i;
> > +#ifdef CONFIG_XIP_KERNEL
> > + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> > +#endif
> >
> > /**
> > * MMU is enabled at this point. But page table setup is not complete yet.
> > @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> > map_size, PAGE_KERNEL_EXEC);
> > }
> > }
> > +#ifdef CONFIG_XIP_KERNEL
> > + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> > + for (va = XIP_VIRT_ADDR_START;
> > + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > + va += map_size)
> > + create_pgd_mapping(swapper_pg_dir, va,
> > + CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
> > + map_size, PAGE_KERNEL_EXEC);
> > +
> > +#endif
> >
> > /* Clear fixmap PTE and PMD mappings */
> > clear_fixmap(FIX_PTE);
Le 3/30/21 ? 2:26 AM, Vitaly Wool a ?crit?:
> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt <[email protected]> wrote:
>>
>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected] wrote:
>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
>>> It allows code to be executed directly from non-volatile storage
>>> directly addressable by the CPU, such as QSPI NOR flash which can
>>> be found on many RISC-V platforms. This makes way for significant
>>> optimization of RAM footprint. The XIP kernel is not compressed
>>> since it has to run directly from flash, so it will occupy more
>>> space on the non-volatile storage. The physical flash address used
>>> to link the kernel object files and for storing it has to be known
>>> at compile time and is represented by a Kconfig option.
>>>
>>> XIP on RISC-V will for the time being only work on MMU-enabled
>>> kernels.
>>>
>>> Signed-off-by: Vitaly Wool <[email protected]>
>>>
>>> ---
>>>
>>> Changes in v2:
>>> - dedicated macro for XIP address fixup when MMU is not enabled yet
>>> o both for 32-bit and 64-bit RISC-V
>>> - SP is explicitly set to a safe place in RAM before __copy_data call
>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>>> Changes in v3:
>>> - rebased against latest for-next
>>> - XIP address fixup macro now takes an argument
>>> - SMP related fixes
>>> Changes in v4:
>>> - rebased against the current for-next
>>> - less #ifdef's in C/ASM code
>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
>>> - Fixed multi-core boot
>>> Changes in v5:
>>> - fixed build error for non-XIP kernels
>>> Changes in v6:
>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
>>> PHYS_RAM_BASE in non-XIP configurations if needed
>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
>>> effects
>>> - fixed crash for non-XIP kernels that don't use built-in DTB
>>
>> So v5 landed on for-next, which generally means it's best to avoid
>> re-spinning the patch and instead send along fixups. That said, the v5
>> is causing some testing failures for me.
>>
>> I'm going to drop the v5 for now as I don't have time to test this
>> tonight. I'll try and take a look soon, as it will conflict with Alex's
>> patches.
>
> I can come up with the incremental patch instead pretty much straight
> away if that works better.
>
> ~Vitaly
>
>>> arch/riscv/Kconfig | 49 ++++++++++-
>>> arch/riscv/Makefile | 8 +-
>>> arch/riscv/boot/Makefile | 13 +++
>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
>>> arch/riscv/kernel/head.S | 49 ++++++++++-
>>> arch/riscv/kernel/head.h | 3 +
>>> arch/riscv/kernel/setup.c | 8 +-
>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++++
>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
>>> 11 files changed, 426 insertions(+), 18 deletions(-)
>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>>>
>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>>> index 8ea60a0a19ae..bd6f82240c34 100644
>>> --- a/arch/riscv/Kconfig
>>> +++ b/arch/riscv/Kconfig
>>> @@ -441,7 +441,7 @@ config EFI_STUB
>>>
>>> config EFI
>>> bool "UEFI runtime support"
>>> - depends on OF
>>> + depends on OF && !XIP_KERNEL
>>> select LIBFDT
>>> select UCS2_STRING
>>> select EFI_PARAMS_FROM_FDT
>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
>>> def_bool y
>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>>>
>>> +config PHYS_RAM_BASE_FIXED
>>> + bool "Explicitly specified physical RAM address"
>>> + default n
>>> +
>>> +config PHYS_RAM_BASE
>>> + hex "Platform Physical RAM address"
>>> + depends on PHYS_RAM_BASE_FIXED
>>> + default "0x80000000"
>>> + help
>>> + This is the physical address of RAM in the system. It has to be
>>> + explicitly specified to run early relocations of read-write data
>>> + from flash to RAM.
>>> +
>>> +config XIP_KERNEL
>>> + bool "Kernel Execute-In-Place from ROM"
>>> + depends on MMU
>>> + select PHYS_RAM_BASE_FIXED
>>> + help
>>> + Execute-In-Place allows the kernel to run from non-volatile storage
>>> + directly addressable by the CPU, such as NOR flash. This saves RAM
>>> + space since the text section of the kernel is not loaded from flash
>>> + to RAM. Read-write sections, such as the data section and stack,
>>> + are still copied to RAM. The XIP kernel is not compressed since
>>> + it has to run directly from flash, so it will take more space to
>>> + store it. The flash address used to link the kernel object files,
>>> + and for storing it, is configuration dependent. Therefore, if you
>>> + say Y here, you must know the proper physical address where to
>>> + store the kernel image depending on your own flash memory usage.
>>> +
>>> + Also note that the make target becomes "make xipImage" rather than
>>> + "make zImage" or "make Image". The final kernel binary to put in
>>> + ROM memory will be arch/riscv/boot/xipImage.
>>> +
>>> + If unsure, say N.
>>> +
>>> +config XIP_PHYS_ADDR
>>> + hex "XIP Kernel Physical Location"
>>> + depends on XIP_KERNEL
>>> + default "0x21000000"
>>> + help
>>> + This is the physical address in your flash memory the kernel will
>>> + be linked for and stored to. This address is dependent on your
>>> + own flash usage.
>>> +
>>> endmenu
>>>
>>> config BUILTIN_DTB
>>> - def_bool n
>>> + bool
>>> depends on OF
>>> + default y if XIP_KERNEL
>>>
>>> menu "Power management options"
>>>
>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
>>> index 1368d943f1f3..8fcbec03974d 100644
>>> --- a/arch/riscv/Makefile
>>> +++ b/arch/riscv/Makefile
>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>>>
>>> # Default target when executing plain make
>>> boot := arch/riscv/boot
>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>> +KBUILD_IMAGE := $(boot)/xipImage
>>> +else
>>> KBUILD_IMAGE := $(boot)/Image.gz
>>> +endif
>>>
>>> head-y := arch/riscv/kernel/head.o
>>>
>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
>>> vdso_install:
>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>>>
>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
>>> KBUILD_IMAGE := $(boot)/loader.bin
>>> else
>>> KBUILD_IMAGE := $(boot)/Image.gz
>>> endif
>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
>>> +endif
>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>>>
>>> all: $(notdir $(KBUILD_IMAGE))
>>>
>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
>>> index 03404c84f971..6bf299f70c27 100644
>>> --- a/arch/riscv/boot/Makefile
>>> +++ b/arch/riscv/boot/Makefile
>>> @@ -17,8 +17,21 @@
>>> KCOV_INSTRUMENT := n
>>>
>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
>>>
>>> targets := Image Image.* loader loader.o loader.lds loader.bin
>>> +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
>>> +
>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>> +
>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
>>> +cmd_mkxip = $(cmd_objcopy)
>>> +
>>> +$(obj)/xipImage: vmlinux FORCE
>>> + $(call if_changed,mkxip)
>>> + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
>>> +
>>> +endif
>>>
>>> $(obj)/Image: vmlinux FORCE
>>> $(call if_changed,objcopy)
>>> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
>>> --- a/arch/riscv/include/asm/pgtable.h
>>> +++ b/arch/riscv/include/asm/pgtable.h
>>> @@ -11,6 +11,33 @@
>>>
>>> #include <asm/pgtable-bits.h>
>>>
>>> +#ifdef CONFIG_MMU
>>> +
>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>> +
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
>>> +
>>> +#define XIP_OFFSET SZ_8M
>>> +#define XIP_MASK (SZ_8M - 1)
>>> +#define XIP_VIRT_ADDR(physaddr) \
>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
>>> +
>>> +#else
>>> +
>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
>>> +
>>> +#endif /* CONFIG_XIP_KERNEL */
>>> +
>>> +#else
>>> +
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
>>> +#endif /* CONFIG_XIP_KERNEL */
>>> +#endif /* CONFIG_MMU */
>>> +
>>> #ifndef __ASSEMBLY__
>>>
>>> /* Page Upper Directory not used in RISC-V */
>>> @@ -21,9 +48,25 @@
>>>
>>> #ifdef CONFIG_MMU
>>>
>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +/*
>>> + * Since we use sections to map it, this macro replaces the physical address
>>> + * with its virtual address while keeping offset from the base section.
>>> + */
>>> +#define XIP_PHYS_ADDR(va) \
>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
>>> +
>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>> +
>>> +#define XIP_FIXUP(addr) ({ \
>>> + uintptr_t __a = (uintptr_t)(addr); \
>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET : __a; \
>>> +})
>>> +#else
>>> +#define XIP_FIXUP(addr) (addr)
>>> +#endif /* CONFIG_XIP_KERNEL */
>>>
>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
>>> #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
>>> @@ -484,8 +527,20 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
>>>
>>> #define kern_addr_valid(addr) (1) /* FIXME */
>>>
>>> -extern void *dtb_early_va;
>>> -extern uintptr_t dtb_early_pa;
>>> +extern void *_dtb_early_va;
>>> +extern uintptr_t _dtb_early_pa;
>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
>>> +
>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
>>> +
>>> +#else
>>> +
>>> +#define dtb_early_va _dtb_early_va
>>> +#define dtb_early_pa _dtb_early_pa
>>> +
>>> +#endif /* CONFIG_XIP_KERNEL */
>>> +
>>> void setup_bootmem(void);
>>> void paging_init(void);
>>> void misc_mem_init(void);
>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
>>> index 685fae72b7f5..2413c2997350 100644
>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned long hartid)
>>> }
>>> #endif
>>>
>>> +static inline unsigned long get_secondary_start_phys(void)
>>> +{
>>> +#ifdef CONFIG_XIP_KERNEL
>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
>>> +#else
>>> + return __pa_symbol(secondary_start_sbi);
>>> +#endif
>>> +}
>>> +
>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
>>> {
>>> int rc;
>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
>>> + unsigned long boot_addr = get_secondary_start_phys();
>>> int hartid = cpuid_to_hartid_map(cpuid);
>>>
>>> cpu_update_secondary_bootdata(cpuid, tidle);
>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>>> index f5a9bad86e58..bbe74e37914f 100644
>>> --- a/arch/riscv/kernel/head.S
>>> +++ b/arch/riscv/kernel/head.S
>>> @@ -9,11 +9,23 @@
>>> #include <linux/linkage.h>
>>> #include <asm/thread_info.h>
>>> #include <asm/page.h>
>>> +#include <asm/pgtable.h>
>>> #include <asm/csr.h>
>>> #include <asm/hwcap.h>
>>> #include <asm/image.h>
>>> #include "efi-header.S"
>>>
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +.macro XIP_FIXUP_OFFSET reg
>>> + REG_L t0, _xip_fixup
>>> + add \reg, \reg, t0
>>> +.endm
>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
>>> +#else
>>> +.macro XIP_FIXUP_OFFSET reg
>>> +.endm
>>> +#endif /* CONFIG_XIP_KERNEL */
>>> +
>>> __HEAD
>>> ENTRY(_start)
>>> /*
>>> @@ -69,7 +81,11 @@ pe_head_start:
>>> #ifdef CONFIG_MMU
>>> relocate:
>>> /* Relocate return address */
>>> +#ifdef CONFIG_XIP_KERNEL
>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>> +#else
>>> li a1, PAGE_OFFSET
>>> +#endif
>>> la a2, _start
>>> sub a1, a1, a2
>>> add ra, ra, a1
>>> @@ -91,6 +107,7 @@ relocate:
>>> * to ensure the new translations are in use.
>>> */
>>> la a0, trampoline_pg_dir
>>> + XIP_FIXUP_OFFSET a0
>>> srl a0, a0, PAGE_SHIFT
>>> or a0, a0, a1
>>> sfence.vma
>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
>>>
>>> slli a3, a0, LGREG
>>> la a4, __cpu_up_stack_pointer
>>> + XIP_FIXUP_OFFSET a4
>>> la a5, __cpu_up_task_pointer
>>> + XIP_FIXUP_OFFSET a5
>>> add a4, a3, a4
>>> add a5, a3, a5
>>> REG_L sp, (a4)
>>> @@ -156,6 +175,7 @@ secondary_start_common:
>>> #ifdef CONFIG_MMU
>>> /* Enable virtual memory and relocate to virtual address */
>>> la a0, swapper_pg_dir
>>> + XIP_FIXUP_OFFSET a0
>>> call relocate
>>> #endif
>>> call setup_trap_vector
>>> @@ -236,12 +256,33 @@ pmp_done:
>>> .Lgood_cores:
>>> #endif
>>>
>>> +#ifndef CONFIG_XIP_KERNEL
>>> /* Pick one hart to run the main boot sequence */
>>> la a3, hart_lottery
>>> li a2, 1
>>> amoadd.w a3, a2, (a3)
>>> bnez a3, .Lsecondary_start
>>>
>>> +#else
>>> + /* hart_lottery in flash contains a magic number */
>>> + la a3, hart_lottery
>>> + mv a2, a3
>>> + XIP_FIXUP_OFFSET a2
>>> + lw t1, (a3)
>>> + amoswap.w t0, t1, (a2)
>>> + /* first time here if hart_lottery in RAM is not set */
>>> + beq t0, t1, .Lsecondary_start
>>> +
>>> + la sp, _end + THREAD_SIZE
>>> + XIP_FIXUP_OFFSET sp
>>> + mv s0, a0
>>> + call __copy_data
>>> +
>>> + /* Restore a0 copy */
>>> + mv a0, s0
>>> +#endif
>>> +
>>> +#ifndef CONFIG_XIP_KERNEL
>>> /* Clear BSS for flat non-ELF images */
>>> la a3, __bss_start
>>> la a4, __bss_stop
>>> @@ -251,15 +292,18 @@ clear_bss:
>>> add a3, a3, RISCV_SZPTR
>>> blt a3, a4, clear_bss
>>> clear_bss_done:
>>> -
>>> +#endif
>>> /* Save hart ID and DTB physical address */
>>> mv s0, a0
>>> mv s1, a1
>>> +
>>> la a2, boot_cpu_hartid
>>> + XIP_FIXUP_OFFSET a2
>>> REG_S a0, (a2)
>>>
>>> /* Initialize page tables and relocate to virtual addresses */
>>> la sp, init_thread_union + THREAD_SIZE
>>> + XIP_FIXUP_OFFSET sp
>>> #ifdef CONFIG_BUILTIN_DTB
>>> la a0, __dtb_start
>>> #else
>>> @@ -268,6 +312,7 @@ clear_bss_done:
>>> call setup_vm
>>> #ifdef CONFIG_MMU
>>> la a0, early_pg_dir
>>> + XIP_FIXUP_OFFSET a0
>>> call relocate
>>> #endif /* CONFIG_MMU */
>>>
>>> @@ -292,7 +337,9 @@ clear_bss_done:
>>>
>>> slli a3, a0, LGREG
>>> la a1, __cpu_up_stack_pointer
>>> + XIP_FIXUP_OFFSET a1
>>> la a2, __cpu_up_task_pointer
>>> + XIP_FIXUP_OFFSET a2
>>> add a1, a3, a1
>>> add a2, a3, a2
>>>
>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
>>> index b48dda3d04f6..aabbc3ac3e48 100644
>>> --- a/arch/riscv/kernel/head.h
>>> +++ b/arch/riscv/kernel/head.h
>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>>>
>>> asmlinkage void do_page_fault(struct pt_regs *regs);
>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +asmlinkage void __init __copy_data(void);
>>> +#endif
>>>
>>> extern void *__cpu_up_stack_pointer[];
>>> extern void *__cpu_up_task_pointer[];
>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>>> index e85bacff1b50..a0384c72c272 100644
>>> --- a/arch/riscv/kernel/setup.c
>>> +++ b/arch/riscv/kernel/setup.c
>>> @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
>>> * This is used before the kernel initializes the BSS so it can't be in the
>>> * BSS.
>>> */
>>> -atomic_t hart_lottery __section(".sdata");
>>> +atomic_t hart_lottery __section(".sdata")
>>> +#ifdef CONFIG_XIP_KERNEL
>>> += ATOMIC_INIT(0xC001BEEF)
>>> +#endif
>>> +;
>>> unsigned long boot_cpu_hartid;
>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
>>>
>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
>>> unflatten_and_copy_device_tree();
>>> #else
>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
>>> unflatten_device_tree();
>>> else
>>> pr_err("No DTB found in kernel mappings\n");
>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
>>> new file mode 100644
>>> index 000000000000..9f0f08c34cd3
>>> --- /dev/null
>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
>>> @@ -0,0 +1,132 @@
>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>> +/*
>>> + * Copyright (C) 2012 Regents of the University of California
>>> + * Copyright (C) 2017 SiFive
>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
>>> + */
>>> +
>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>> +/* No __ro_after_init data in the .rodata section - which will always be ro */
>>> +#define RO_AFTER_INIT_DATA
>>> +
>>> +#include <asm/vmlinux.lds.h>
>>> +#include <asm/page.h>
>>> +#include <asm/pgtable.h>
>>> +#include <asm/cache.h>
>>> +#include <asm/thread_info.h>
>>> +
>>> +OUTPUT_ARCH(riscv)
>>> +ENTRY(_start)
>>> +
>>> +jiffies = jiffies_64;
>>> +
>>> +SECTIONS
>>> +{
>>> + /* Beginning of code and text segment */
>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
>>> + _xiprom = .;
>>> + _start = .;
>>> + HEAD_TEXT_SECTION
>>> + INIT_TEXT_SECTION(PAGE_SIZE)
>>> + /* we have to discard exit text and such at runtime, not link time */
>>> + .exit.text :
>>> + {
>>> + EXIT_TEXT
>>> + }
>>> +
>>> + .text : {
>>> + _text = .;
>>> + _stext = .;
>>> + TEXT_TEXT
>>> + SCHED_TEXT
>>> + CPUIDLE_TEXT
>>> + LOCK_TEXT
>>> + KPROBES_TEXT
>>> + ENTRY_TEXT
>>> + IRQENTRY_TEXT
>>> + SOFTIRQENTRY_TEXT
>>> + *(.fixup)
>>> + _etext = .;
>>> + }
>>> + RO_DATA(L1_CACHE_BYTES)
>>> + .srodata : {
>>> + *(.srodata*)
>>> + }
>>> + .init.rodata : {
>>> + INIT_SETUP(16)
>>> + INIT_CALLS
>>> + CON_INITCALL
>>> + INIT_RAM_FS
>>> + }
>>> + _exiprom = .; /* End of XIP ROM area */
>>> +
>>> +
>>> +/*
>>> + * From this point, stuff is considered writable and will be copied to RAM
>>> + */
>>> + __data_loc = ALIGN(16); /* location in file */
>>> + . = PAGE_OFFSET; /* location in memory */
>>> +
>>> + _sdata = .; /* Start of data section */
>>> + _data = .;
>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
>>> + _edata = .;
>>> + __start_ro_after_init = .;
>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
>>> + *(.data..ro_after_init)
>>> + }
>>> + __end_ro_after_init = .;
>>> +
>>> + . = ALIGN(PAGE_SIZE);
>>> + __init_begin = .;
>>> + .init.data : {
>>> + INIT_DATA
>>> + }
>>> + .exit.data : {
>>> + EXIT_DATA
>>> + }
>>> + . = ALIGN(8);
>>> + __soc_early_init_table : {
>>> + __soc_early_init_table_start = .;
>>> + KEEP(*(__soc_early_init_table))
>>> + __soc_early_init_table_end = .;
>>> + }
>>> + __soc_builtin_dtb_table : {
>>> + __soc_builtin_dtb_table_start = .;
>>> + KEEP(*(__soc_builtin_dtb_table))
>>> + __soc_builtin_dtb_table_end = .;
>>> + }
>>> + PERCPU_SECTION(L1_CACHE_BYTES)
>>> +
>>> + . = ALIGN(PAGE_SIZE);
>>> + __init_end = .;
>>> +
>>> + .sdata : {
>>> + __global_pointer$ = . + 0x800;
>>> + *(.sdata*)
>>> + *(.sbss*)
>>> + }
>>> +
>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>>> + EXCEPTION_TABLE(0x10)
>>> +
>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
>>> + *(.rel.dyn*)
>>> + }
>>> +
>>> + /*
>>> + * End of copied data. We need a dummy section to get its LMA.
>>> + * Also located before final ALIGN() as trailing padding is not stored
>>> + * in the resulting binary file and useless to copy.
>>> + */
>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
>>> + _edata_loc = LOADADDR(.data.endmark);
>>> +
>>> + . = ALIGN(PAGE_SIZE);
>>> + _end = .;
>>> +
>>> + STABS_DEBUG
>>> + DWARF_DEBUG
>>> +
>>> + DISCARDS
>>> +}
>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
>>> index de03cb22d0e9..6745ec325930 100644
>>> --- a/arch/riscv/kernel/vmlinux.lds.S
>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
>>> @@ -4,7 +4,12 @@
>>> * Copyright (C) 2017 SiFive
>>> */
>>>
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +#include "vmlinux-xip.lds.S"
>>> +#else
>>> +
>>> #define LOAD_OFFSET PAGE_OFFSET
>>> +
>>> #include <asm/vmlinux.lds.h>
>>> #include <asm/page.h>
>>> #include <asm/cache.h>
>>> @@ -132,3 +137,4 @@ SECTIONS
>>>
>>> DISCARDS
>>> }
>>> +#endif /* CONFIG_XIP_KERNEL */
>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
>>> index 7f5036fbee8c..efe649d41f95 100644
>>> --- a/arch/riscv/mm/init.c
>>> +++ b/arch/riscv/mm/init.c
>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>>>
>>> extern char _start[];
>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
>>> -void *dtb_early_va __initdata;
>>> -uintptr_t dtb_early_pa __initdata;
>>> +void *_dtb_early_va __initdata;
>>> +uintptr_t _dtb_early_pa __initdata;
>>>
>>> struct pt_alloc_ops {
>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
>>> (unsigned long)VMALLOC_END);
>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
>>> (unsigned long)high_memory);
>>> +#ifdef CONFIG_XIP_KERNEL
>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
>>> +#endif /* CONFIG_XIP_KERNEL */
>>> }
>>> #else
>>> static void print_vm_layout(void) { }
>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
>>> phys_addr_t dram_end = memblock_end_of_DRAM();
>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>>>
>>> +#ifdef CONFIG_XIP_KERNEL
>>> + vmlinux_start = __pa_symbol(&_sdata);
>>> +#endif
>>> +
>>> /* The maximal physical memory size is -PAGE_OFFSET. */
>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
>>>
>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
>>> memblock_allow_resize();
>>> }
>>>
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +
>>> +extern char _xiprom[], _exiprom[];
>>> +extern char _sdata[], _edata[];
>>> +
>>> +#endif /* CONFIG_XIP_KERNEL */
>>> +
>>> #ifdef CONFIG_MMU
>>> -static struct pt_alloc_ops pt_ops;
>>> +static struct pt_alloc_ops _pt_ops;
>>> +
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
>>> +#else
>>> +#define pt_ops _pt_ops
>>> +#endif
>>>
>>> unsigned long va_pa_offset;
>>> EXPORT_SYMBOL(va_pa_offset);
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
>>> +#endif
>>> unsigned long pfn_base;
>>> EXPORT_SYMBOL(pfn_base);
>>>
>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
>>>
>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
>>>
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
>>> +#endif /* CONFIG_XIP_KERNEL */
>>> +
>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
>>> {
>>> unsigned long addr = __fix_to_virt(idx);
>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>> +
>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
>>> +#endif /* CONFIG_XIP_KERNEL */
>>> +
>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
>>> {
>>> /* Before MMU is enabled */
>>> @@ -354,6 +393,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
>>> return PMD_SIZE;
>>> }
>>>
>>> +#ifdef CONFIG_XIP_KERNEL
>>> +/* called from head.S with MMU off */
>>> +asmlinkage void __init __copy_data(void)
>>> +{
>>> + void *from = (void *)(&_sdata);
>>> + void *end = (void *)(&_end);
>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
>>> + size_t sz = (size_t)(end - from);
>>> +
>>> + memcpy(to, from, sz);
>>> +}
>>> +#endif
>>> +
>>> /*
>>> * setup_vm() is called from head.S with MMU-off.
>>> *
>>> @@ -374,7 +426,8 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
>>>
>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>> {
>>> - uintptr_t va, pa, end_va;
>>> + uintptr_t va, end_va;
>>> + uintptr_t __maybe_unused pa;
>>> uintptr_t load_pa = (uintptr_t)(&_start);
>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
>>> uintptr_t map_size;
>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
>>> #endif
>>>
>>> +#ifdef CONFIG_XIP_KERNEL
>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
>>> +
>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
>>> +#endif
>>> va_pa_offset = PAGE_OFFSET - load_pa;
I should have seen this before, I was too focused on having a XIP kernel
boot. I already moved the kernel mapping in the vmalloc zone: the
virtual to physical translations need to be handled differently now that
the kernel mapping does not lie into linear mapping anymore, we can't
use va_pa_offset defined above for both mappings.
I was rebasing my patchset on the XIP patch but I believe that doing the
other way around would greatly simplify the XIP patch as the kernel
mapping would already be moved outside the linear mapping, there would
be no need to reserve a zone in vmalloc anymore (that simplifies
pgtable.h quite a lot). And the XIP kernel mapping could be implemented
in a new create_kernel_page_table (that would also simplify mm/init.c).
I can help to do that but I don't think we should merge this patch as is
now.
Alex
>>> pfn_base = PFN_DOWN(load_pa);
>>>
>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
>>> #endif
>>>
>>> +#ifdef CONFIG_XIP_KERNEL
>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>> + for (va = XIP_VIRT_ADDR_START;
>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>> + va += PMD_SIZE) {
>>> + create_pmd_mapping(xip_pmd, va,
>>> + xiprom + (va - XIP_VIRT_ADDR_START),
>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
>>> + }
>>> +
>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>> +#endif
>>> +
>>> /*
>>> * Setup early PGD covering entire kernel which will allows
>>> * us to reach paging_init(). We map all memory banks later
>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
>>> #else /* CONFIG_BUILTIN_DTB */
>>> - dtb_early_va = __va(dtb_pa);
>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>> #endif /* CONFIG_BUILTIN_DTB */
>>> #else
>>> #ifndef CONFIG_BUILTIN_DTB
>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>> pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
>>> #else /* CONFIG_BUILTIN_DTB */
>>> - dtb_early_va = __va(dtb_pa);
>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>> #endif /* CONFIG_BUILTIN_DTB */
>>> #endif
>>> dtb_early_pa = dtb_pa;
>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
>>> uintptr_t va, map_size;
>>> phys_addr_t pa, start, end;
>>> u64 i;
>>> +#ifdef CONFIG_XIP_KERNEL
>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
>>> +#endif
>>>
>>> /**
>>> * MMU is enabled at this point. But page table setup is not complete yet.
>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
>>> map_size, PAGE_KERNEL_EXEC);
>>> }
>>> }
>>> +#ifdef CONFIG_XIP_KERNEL
>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
>>> + for (va = XIP_VIRT_ADDR_START;
>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>> + va += map_size)
>>> + create_pgd_mapping(swapper_pg_dir, va,
>>> + CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
>>> + map_size, PAGE_KERNEL_EXEC);
>>> +
>>> +#endif
>>>
>>> /* Clear fixmap PTE and PMD mappings */
>>> clear_fixmap(FIX_PTE);
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
>
>
> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt <[email protected]> wrote:
>>>
>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected] wrote:
>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
>>>> It allows code to be executed directly from non-volatile storage
>>>> directly addressable by the CPU, such as QSPI NOR flash which can
>>>> be found on many RISC-V platforms. This makes way for significant
>>>> optimization of RAM footprint. The XIP kernel is not compressed
>>>> since it has to run directly from flash, so it will occupy more
>>>> space on the non-volatile storage. The physical flash address used
>>>> to link the kernel object files and for storing it has to be known
>>>> at compile time and is represented by a Kconfig option.
>>>>
>>>> XIP on RISC-V will for the time being only work on MMU-enabled
>>>> kernels.
>>>>
>>>> Signed-off-by: Vitaly Wool <[email protected]>
>>>>
>>>> ---
>>>>
>>>> Changes in v2:
>>>> - dedicated macro for XIP address fixup when MMU is not enabled yet
>>>> o both for 32-bit and 64-bit RISC-V
>>>> - SP is explicitly set to a safe place in RAM before __copy_data call
>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>>>> Changes in v3:
>>>> - rebased against latest for-next
>>>> - XIP address fixup macro now takes an argument
>>>> - SMP related fixes
>>>> Changes in v4:
>>>> - rebased against the current for-next
>>>> - less #ifdef's in C/ASM code
>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
>>>> - Fixed multi-core boot
>>>> Changes in v5:
>>>> - fixed build error for non-XIP kernels
>>>> Changes in v6:
>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
>>>> PHYS_RAM_BASE in non-XIP configurations if needed
>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
>>>> effects
>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
>>>
>>> So v5 landed on for-next, which generally means it's best to avoid
>>> re-spinning the patch and instead send along fixups. That said, the v5
>>> is causing some testing failures for me.
>>>
>>> I'm going to drop the v5 for now as I don't have time to test this
>>> tonight. I'll try and take a look soon, as it will conflict with Alex's
>>> patches.
>>
>> I can come up with the incremental patch instead pretty much straight
>> away if that works better.
>>
>> ~Vitaly
>>
>>>> arch/riscv/Kconfig | 49 ++++++++++-
>>>> arch/riscv/Makefile | 8 +-
>>>> arch/riscv/boot/Makefile | 13 +++
>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
>>>> arch/riscv/kernel/head.h | 3 +
>>>> arch/riscv/kernel/setup.c | 8 +-
>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++++
>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>>>>
>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>>>> index 8ea60a0a19ae..bd6f82240c34 100644
>>>> --- a/arch/riscv/Kconfig
>>>> +++ b/arch/riscv/Kconfig
>>>> @@ -441,7 +441,7 @@ config EFI_STUB
>>>>
>>>> config EFI
>>>> bool "UEFI runtime support"
>>>> - depends on OF
>>>> + depends on OF && !XIP_KERNEL
>>>> select LIBFDT
>>>> select UCS2_STRING
>>>> select EFI_PARAMS_FROM_FDT
>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
>>>> def_bool y
>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>>>>
>>>> +config PHYS_RAM_BASE_FIXED
>>>> + bool "Explicitly specified physical RAM address"
>>>> + default n
>>>> +
>>>> +config PHYS_RAM_BASE
>>>> + hex "Platform Physical RAM address"
>>>> + depends on PHYS_RAM_BASE_FIXED
>>>> + default "0x80000000"
>>>> + help
>>>> + This is the physical address of RAM in the system. It has to be
>>>> + explicitly specified to run early relocations of read-write data
>>>> + from flash to RAM.
>>>> +
>>>> +config XIP_KERNEL
>>>> + bool "Kernel Execute-In-Place from ROM"
>>>> + depends on MMU
>>>> + select PHYS_RAM_BASE_FIXED
>>>> + help
>>>> + Execute-In-Place allows the kernel to run from non-volatile storage
>>>> + directly addressable by the CPU, such as NOR flash. This saves RAM
>>>> + space since the text section of the kernel is not loaded from flash
>>>> + to RAM. Read-write sections, such as the data section and stack,
>>>> + are still copied to RAM. The XIP kernel is not compressed since
>>>> + it has to run directly from flash, so it will take more space to
>>>> + store it. The flash address used to link the kernel object files,
>>>> + and for storing it, is configuration dependent. Therefore, if you
>>>> + say Y here, you must know the proper physical address where to
>>>> + store the kernel image depending on your own flash memory usage.
>>>> +
>>>> + Also note that the make target becomes "make xipImage" rather than
>>>> + "make zImage" or "make Image". The final kernel binary to put in
>>>> + ROM memory will be arch/riscv/boot/xipImage.
>>>> +
>>>> + If unsure, say N.
>>>> +
>>>> +config XIP_PHYS_ADDR
>>>> + hex "XIP Kernel Physical Location"
>>>> + depends on XIP_KERNEL
>>>> + default "0x21000000"
>>>> + help
>>>> + This is the physical address in your flash memory the kernel will
>>>> + be linked for and stored to. This address is dependent on your
>>>> + own flash usage.
>>>> +
>>>> endmenu
>>>>
>>>> config BUILTIN_DTB
>>>> - def_bool n
>>>> + bool
>>>> depends on OF
>>>> + default y if XIP_KERNEL
>>>>
>>>> menu "Power management options"
>>>>
>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
>>>> index 1368d943f1f3..8fcbec03974d 100644
>>>> --- a/arch/riscv/Makefile
>>>> +++ b/arch/riscv/Makefile
>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>>>>
>>>> # Default target when executing plain make
>>>> boot := arch/riscv/boot
>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>> +KBUILD_IMAGE := $(boot)/xipImage
>>>> +else
>>>> KBUILD_IMAGE := $(boot)/Image.gz
>>>> +endif
>>>>
>>>> head-y := arch/riscv/kernel/head.o
>>>>
>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
>>>> vdso_install:
>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>>>>
>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
>>>> KBUILD_IMAGE := $(boot)/loader.bin
>>>> else
>>>> KBUILD_IMAGE := $(boot)/Image.gz
>>>> endif
>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
>>>> +endif
>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>>>>
>>>> all: $(notdir $(KBUILD_IMAGE))
>>>>
>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
>>>> index 03404c84f971..6bf299f70c27 100644
>>>> --- a/arch/riscv/boot/Makefile
>>>> +++ b/arch/riscv/boot/Makefile
>>>> @@ -17,8 +17,21 @@
>>>> KCOV_INSTRUMENT := n
>>>>
>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
>>>>
>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
>>>> +
>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>> +
>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
>>>> +cmd_mkxip = $(cmd_objcopy)
>>>> +
>>>> +$(obj)/xipImage: vmlinux FORCE
>>>> + $(call if_changed,mkxip)
>>>> + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
>>>> +
>>>> +endif
>>>>
>>>> $(obj)/Image: vmlinux FORCE
>>>> $(call if_changed,objcopy)
>>>> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
>>>> --- a/arch/riscv/include/asm/pgtable.h
>>>> +++ b/arch/riscv/include/asm/pgtable.h
>>>> @@ -11,6 +11,33 @@
>>>>
>>>> #include <asm/pgtable-bits.h>
>>>>
>>>> +#ifdef CONFIG_MMU
>>>> +
>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>>> +
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
>>>> +
>>>> +#define XIP_OFFSET SZ_8M
>>>> +#define XIP_MASK (SZ_8M - 1)
>>>> +#define XIP_VIRT_ADDR(physaddr) \
>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
>>>> +
>>>> +#else
>>>> +
>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
>>>> +
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>> +
>>>> +#else
>>>> +
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>> +#endif /* CONFIG_MMU */
>>>> +
>>>> #ifndef __ASSEMBLY__
>>>>
>>>> /* Page Upper Directory not used in RISC-V */
>>>> @@ -21,9 +48,25 @@
>>>>
>>>> #ifdef CONFIG_MMU
>>>>
>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +/*
>>>> + * Since we use sections to map it, this macro replaces the physical address
>>>> + * with its virtual address while keeping offset from the base section.
>>>> + */
>>>> +#define XIP_PHYS_ADDR(va) \
>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
>>>> +
>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>> +
>>>> +#define XIP_FIXUP(addr) ({ \
>>>> + uintptr_t __a = (uintptr_t)(addr); \
>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET : __a; \
>>>> +})
>>>> +#else
>>>> +#define XIP_FIXUP(addr) (addr)
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>
>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
>>>> @@ -484,8 +527,20 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
>>>>
>>>> #define kern_addr_valid(addr) (1) /* FIXME */
>>>>
>>>> -extern void *dtb_early_va;
>>>> -extern uintptr_t dtb_early_pa;
>>>> +extern void *_dtb_early_va;
>>>> +extern uintptr_t _dtb_early_pa;
>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
>>>> +
>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
>>>> +
>>>> +#else
>>>> +
>>>> +#define dtb_early_va _dtb_early_va
>>>> +#define dtb_early_pa _dtb_early_pa
>>>> +
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>> +
>>>> void setup_bootmem(void);
>>>> void paging_init(void);
>>>> void misc_mem_init(void);
>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
>>>> index 685fae72b7f5..2413c2997350 100644
>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned long hartid)
>>>> }
>>>> #endif
>>>>
>>>> +static inline unsigned long get_secondary_start_phys(void)
>>>> +{
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
>>>> +#else
>>>> + return __pa_symbol(secondary_start_sbi);
>>>> +#endif
>>>> +}
>>>> +
>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
>>>> {
>>>> int rc;
>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
>>>> + unsigned long boot_addr = get_secondary_start_phys();
>>>> int hartid = cpuid_to_hartid_map(cpuid);
>>>>
>>>> cpu_update_secondary_bootdata(cpuid, tidle);
>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>>>> index f5a9bad86e58..bbe74e37914f 100644
>>>> --- a/arch/riscv/kernel/head.S
>>>> +++ b/arch/riscv/kernel/head.S
>>>> @@ -9,11 +9,23 @@
>>>> #include <linux/linkage.h>
>>>> #include <asm/thread_info.h>
>>>> #include <asm/page.h>
>>>> +#include <asm/pgtable.h>
>>>> #include <asm/csr.h>
>>>> #include <asm/hwcap.h>
>>>> #include <asm/image.h>
>>>> #include "efi-header.S"
>>>>
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +.macro XIP_FIXUP_OFFSET reg
>>>> + REG_L t0, _xip_fixup
>>>> + add \reg, \reg, t0
>>>> +.endm
>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
>>>> +#else
>>>> +.macro XIP_FIXUP_OFFSET reg
>>>> +.endm
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>> +
>>>> __HEAD
>>>> ENTRY(_start)
>>>> /*
>>>> @@ -69,7 +81,11 @@ pe_head_start:
>>>> #ifdef CONFIG_MMU
>>>> relocate:
>>>> /* Relocate return address */
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>> +#else
>>>> li a1, PAGE_OFFSET
>>>> +#endif
>>>> la a2, _start
>>>> sub a1, a1, a2
>>>> add ra, ra, a1
>>>> @@ -91,6 +107,7 @@ relocate:
>>>> * to ensure the new translations are in use.
>>>> */
>>>> la a0, trampoline_pg_dir
>>>> + XIP_FIXUP_OFFSET a0
>>>> srl a0, a0, PAGE_SHIFT
>>>> or a0, a0, a1
>>>> sfence.vma
>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
>>>>
>>>> slli a3, a0, LGREG
>>>> la a4, __cpu_up_stack_pointer
>>>> + XIP_FIXUP_OFFSET a4
>>>> la a5, __cpu_up_task_pointer
>>>> + XIP_FIXUP_OFFSET a5
>>>> add a4, a3, a4
>>>> add a5, a3, a5
>>>> REG_L sp, (a4)
>>>> @@ -156,6 +175,7 @@ secondary_start_common:
>>>> #ifdef CONFIG_MMU
>>>> /* Enable virtual memory and relocate to virtual address */
>>>> la a0, swapper_pg_dir
>>>> + XIP_FIXUP_OFFSET a0
>>>> call relocate
>>>> #endif
>>>> call setup_trap_vector
>>>> @@ -236,12 +256,33 @@ pmp_done:
>>>> .Lgood_cores:
>>>> #endif
>>>>
>>>> +#ifndef CONFIG_XIP_KERNEL
>>>> /* Pick one hart to run the main boot sequence */
>>>> la a3, hart_lottery
>>>> li a2, 1
>>>> amoadd.w a3, a2, (a3)
>>>> bnez a3, .Lsecondary_start
>>>>
>>>> +#else
>>>> + /* hart_lottery in flash contains a magic number */
>>>> + la a3, hart_lottery
>>>> + mv a2, a3
>>>> + XIP_FIXUP_OFFSET a2
>>>> + lw t1, (a3)
>>>> + amoswap.w t0, t1, (a2)
>>>> + /* first time here if hart_lottery in RAM is not set */
>>>> + beq t0, t1, .Lsecondary_start
>>>> +
>>>> + la sp, _end + THREAD_SIZE
>>>> + XIP_FIXUP_OFFSET sp
>>>> + mv s0, a0
>>>> + call __copy_data
>>>> +
>>>> + /* Restore a0 copy */
>>>> + mv a0, s0
>>>> +#endif
>>>> +
>>>> +#ifndef CONFIG_XIP_KERNEL
>>>> /* Clear BSS for flat non-ELF images */
>>>> la a3, __bss_start
>>>> la a4, __bss_stop
>>>> @@ -251,15 +292,18 @@ clear_bss:
>>>> add a3, a3, RISCV_SZPTR
>>>> blt a3, a4, clear_bss
>>>> clear_bss_done:
>>>> -
>>>> +#endif
>>>> /* Save hart ID and DTB physical address */
>>>> mv s0, a0
>>>> mv s1, a1
>>>> +
>>>> la a2, boot_cpu_hartid
>>>> + XIP_FIXUP_OFFSET a2
>>>> REG_S a0, (a2)
>>>>
>>>> /* Initialize page tables and relocate to virtual addresses */
>>>> la sp, init_thread_union + THREAD_SIZE
>>>> + XIP_FIXUP_OFFSET sp
>>>> #ifdef CONFIG_BUILTIN_DTB
>>>> la a0, __dtb_start
>>>> #else
>>>> @@ -268,6 +312,7 @@ clear_bss_done:
>>>> call setup_vm
>>>> #ifdef CONFIG_MMU
>>>> la a0, early_pg_dir
>>>> + XIP_FIXUP_OFFSET a0
>>>> call relocate
>>>> #endif /* CONFIG_MMU */
>>>>
>>>> @@ -292,7 +337,9 @@ clear_bss_done:
>>>>
>>>> slli a3, a0, LGREG
>>>> la a1, __cpu_up_stack_pointer
>>>> + XIP_FIXUP_OFFSET a1
>>>> la a2, __cpu_up_task_pointer
>>>> + XIP_FIXUP_OFFSET a2
>>>> add a1, a3, a1
>>>> add a2, a3, a2
>>>>
>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
>>>> index b48dda3d04f6..aabbc3ac3e48 100644
>>>> --- a/arch/riscv/kernel/head.h
>>>> +++ b/arch/riscv/kernel/head.h
>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>>>>
>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +asmlinkage void __init __copy_data(void);
>>>> +#endif
>>>>
>>>> extern void *__cpu_up_stack_pointer[];
>>>> extern void *__cpu_up_task_pointer[];
>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>>>> index e85bacff1b50..a0384c72c272 100644
>>>> --- a/arch/riscv/kernel/setup.c
>>>> +++ b/arch/riscv/kernel/setup.c
>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
>>>> * This is used before the kernel initializes the BSS so it can't be in the
>>>> * BSS.
>>>> */
>>>> -atomic_t hart_lottery __section(".sdata");
>>>> +atomic_t hart_lottery __section(".sdata")
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> += ATOMIC_INIT(0xC001BEEF)
>>>> +#endif
>>>> +;
>>>> unsigned long boot_cpu_hartid;
>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
>>>>
>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
>>>> unflatten_and_copy_device_tree();
>>>> #else
>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
>>>> unflatten_device_tree();
>>>> else
>>>> pr_err("No DTB found in kernel mappings\n");
>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>> new file mode 100644
>>>> index 000000000000..9f0f08c34cd3
>>>> --- /dev/null
>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>> @@ -0,0 +1,132 @@
>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>>> +/*
>>>> + * Copyright (C) 2012 Regents of the University of California
>>>> + * Copyright (C) 2017 SiFive
>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
>>>> + */
>>>> +
>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>> +/* No __ro_after_init data in the .rodata section - which will always be ro */
>>>> +#define RO_AFTER_INIT_DATA
>>>> +
>>>> +#include <asm/vmlinux.lds.h>
>>>> +#include <asm/page.h>
>>>> +#include <asm/pgtable.h>
>>>> +#include <asm/cache.h>
>>>> +#include <asm/thread_info.h>
>>>> +
>>>> +OUTPUT_ARCH(riscv)
>>>> +ENTRY(_start)
>>>> +
>>>> +jiffies = jiffies_64;
>>>> +
>>>> +SECTIONS
>>>> +{
>>>> + /* Beginning of code and text segment */
>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
>>>> + _xiprom = .;
>>>> + _start = .;
>>>> + HEAD_TEXT_SECTION
>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
>>>> + /* we have to discard exit text and such at runtime, not link time */
>>>> + .exit.text :
>>>> + {
>>>> + EXIT_TEXT
>>>> + }
>>>> +
>>>> + .text : {
>>>> + _text = .;
>>>> + _stext = .;
>>>> + TEXT_TEXT
>>>> + SCHED_TEXT
>>>> + CPUIDLE_TEXT
>>>> + LOCK_TEXT
>>>> + KPROBES_TEXT
>>>> + ENTRY_TEXT
>>>> + IRQENTRY_TEXT
>>>> + SOFTIRQENTRY_TEXT
>>>> + *(.fixup)
>>>> + _etext = .;
>>>> + }
>>>> + RO_DATA(L1_CACHE_BYTES)
>>>> + .srodata : {
>>>> + *(.srodata*)
>>>> + }
>>>> + .init.rodata : {
>>>> + INIT_SETUP(16)
>>>> + INIT_CALLS
>>>> + CON_INITCALL
>>>> + INIT_RAM_FS
>>>> + }
>>>> + _exiprom = .; /* End of XIP ROM area */
>>>> +
>>>> +
>>>> +/*
>>>> + * From this point, stuff is considered writable and will be copied to RAM
>>>> + */
>>>> + __data_loc = ALIGN(16); /* location in file */
>>>> + . = PAGE_OFFSET; /* location in memory */
>>>> +
>>>> + _sdata = .; /* Start of data section */
>>>> + _data = .;
>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
>>>> + _edata = .;
>>>> + __start_ro_after_init = .;
>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
>>>> + *(.data..ro_after_init)
>>>> + }
>>>> + __end_ro_after_init = .;
>>>> +
>>>> + . = ALIGN(PAGE_SIZE);
>>>> + __init_begin = .;
>>>> + .init.data : {
>>>> + INIT_DATA
>>>> + }
>>>> + .exit.data : {
>>>> + EXIT_DATA
>>>> + }
>>>> + . = ALIGN(8);
>>>> + __soc_early_init_table : {
>>>> + __soc_early_init_table_start = .;
>>>> + KEEP(*(__soc_early_init_table))
>>>> + __soc_early_init_table_end = .;
>>>> + }
>>>> + __soc_builtin_dtb_table : {
>>>> + __soc_builtin_dtb_table_start = .;
>>>> + KEEP(*(__soc_builtin_dtb_table))
>>>> + __soc_builtin_dtb_table_end = .;
>>>> + }
>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
>>>> +
>>>> + . = ALIGN(PAGE_SIZE);
>>>> + __init_end = .;
>>>> +
>>>> + .sdata : {
>>>> + __global_pointer$ = . + 0x800;
>>>> + *(.sdata*)
>>>> + *(.sbss*)
>>>> + }
>>>> +
>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>>>> + EXCEPTION_TABLE(0x10)
>>>> +
>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
>>>> + *(.rel.dyn*)
>>>> + }
>>>> +
>>>> + /*
>>>> + * End of copied data. We need a dummy section to get its LMA.
>>>> + * Also located before final ALIGN() as trailing padding is not stored
>>>> + * in the resulting binary file and useless to copy.
>>>> + */
>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
>>>> + _edata_loc = LOADADDR(.data.endmark);
>>>> +
>>>> + . = ALIGN(PAGE_SIZE);
>>>> + _end = .;
>>>> +
>>>> + STABS_DEBUG
>>>> + DWARF_DEBUG
>>>> +
>>>> + DISCARDS
>>>> +}
>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
>>>> index de03cb22d0e9..6745ec325930 100644
>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
>>>> @@ -4,7 +4,12 @@
>>>> * Copyright (C) 2017 SiFive
>>>> */
>>>>
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +#include "vmlinux-xip.lds.S"
>>>> +#else
>>>> +
>>>> #define LOAD_OFFSET PAGE_OFFSET
>>>> +
>>>> #include <asm/vmlinux.lds.h>
>>>> #include <asm/page.h>
>>>> #include <asm/cache.h>
>>>> @@ -132,3 +137,4 @@ SECTIONS
>>>>
>>>> DISCARDS
>>>> }
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
>>>> index 7f5036fbee8c..efe649d41f95 100644
>>>> --- a/arch/riscv/mm/init.c
>>>> +++ b/arch/riscv/mm/init.c
>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>>>>
>>>> extern char _start[];
>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
>>>> -void *dtb_early_va __initdata;
>>>> -uintptr_t dtb_early_pa __initdata;
>>>> +void *_dtb_early_va __initdata;
>>>> +uintptr_t _dtb_early_pa __initdata;
>>>>
>>>> struct pt_alloc_ops {
>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
>>>> (unsigned long)VMALLOC_END);
>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
>>>> (unsigned long)high_memory);
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>> }
>>>> #else
>>>> static void print_vm_layout(void) { }
>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>>>>
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> + vmlinux_start = __pa_symbol(&_sdata);
>>>> +#endif
>>>> +
>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
>>>>
>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
>>>> memblock_allow_resize();
>>>> }
>>>>
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +
>>>> +extern char _xiprom[], _exiprom[];
>>>> +extern char _sdata[], _edata[];
>>>> +
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>> +
>>>> #ifdef CONFIG_MMU
>>>> -static struct pt_alloc_ops pt_ops;
>>>> +static struct pt_alloc_ops _pt_ops;
>>>> +
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
>>>> +#else
>>>> +#define pt_ops _pt_ops
>>>> +#endif
>>>>
>>>> unsigned long va_pa_offset;
>>>> EXPORT_SYMBOL(va_pa_offset);
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
>>>> +#endif
>>>> unsigned long pfn_base;
>>>> EXPORT_SYMBOL(pfn_base);
>>>>
>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
>>>>
>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
>>>>
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>> +
>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
>>>> {
>>>> unsigned long addr = __fix_to_virt(idx);
>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>>> +
>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>> +
>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
>>>> {
>>>> /* Before MMU is enabled */
>>>> @@ -354,6 +393,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
>>>> return PMD_SIZE;
>>>> }
>>>>
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> +/* called from head.S with MMU off */
>>>> +asmlinkage void __init __copy_data(void)
>>>> +{
>>>> + void *from = (void *)(&_sdata);
>>>> + void *end = (void *)(&_end);
>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
>>>> + size_t sz = (size_t)(end - from);
>>>> +
>>>> + memcpy(to, from, sz);
>>>> +}
>>>> +#endif
>>>> +
>>>> /*
>>>> * setup_vm() is called from head.S with MMU-off.
>>>> *
>>>> @@ -374,7 +426,8 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
>>>>
>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>> {
>>>> - uintptr_t va, pa, end_va;
>>>> + uintptr_t va, end_va;
>>>> + uintptr_t __maybe_unused pa;
>>>> uintptr_t load_pa = (uintptr_t)(&_start);
>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
>>>> uintptr_t map_size;
>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
>>>> #endif
>>>>
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
>>>> +
>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
>>>> +#endif
>>>> va_pa_offset = PAGE_OFFSET - load_pa;
>
> I should have seen this before, I was too focused on having a XIP kernel
> boot. I already moved the kernel mapping in the vmalloc zone: the
> virtual to physical translations need to be handled differently now that
> the kernel mapping does not lie into linear mapping anymore, we can't
> use va_pa_offset defined above for both mappings.
>
> I was rebasing my patchset on the XIP patch but I believe that doing the
> other way around would greatly simplify the XIP patch as the kernel
> mapping would already be moved outside the linear mapping, there would
> be no need to reserve a zone in vmalloc anymore (that simplifies
> pgtable.h quite a lot). And the XIP kernel mapping could be implemented
> in a new create_kernel_page_table (that would also simplify mm/init.c).
>
> I can help to do that but I don't think we should merge this patch as is
> now.
I think that's the right way to go for now: it's a lot harder to test
the XIP stuff, as it requires a bunch of harness changes. So let's take
the page table refactoring in now and rebase this stuff on top of it.
There's really no way to do both without making more work for someone,
it's just a headache on timing.
Alex: if you want to sign up to spend some time there that'd be great,
otherwise I will. Either way, can you point me (either just indicate
the old version is OK or send a new one) to what you want me to look at
WRT the page table code? IIRC it looked pretty much fine, but I'll take
another look ASAP so we can avoid serializing everything.
>
> Alex
>
>>>> pfn_base = PFN_DOWN(load_pa);
>>>>
>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
>>>> #endif
>>>>
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>>> + for (va = XIP_VIRT_ADDR_START;
>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>> + va += PMD_SIZE) {
>>>> + create_pmd_mapping(xip_pmd, va,
>>>> + xiprom + (va - XIP_VIRT_ADDR_START),
>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
>>>> + }
>>>> +
>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>>> +#endif
>>>> +
>>>> /*
>>>> * Setup early PGD covering entire kernel which will allows
>>>> * us to reach paging_init(). We map all memory banks later
>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
>>>> #else /* CONFIG_BUILTIN_DTB */
>>>> - dtb_early_va = __va(dtb_pa);
>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>> #endif /* CONFIG_BUILTIN_DTB */
>>>> #else
>>>> #ifndef CONFIG_BUILTIN_DTB
>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>> pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
>>>> #else /* CONFIG_BUILTIN_DTB */
>>>> - dtb_early_va = __va(dtb_pa);
>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>> #endif /* CONFIG_BUILTIN_DTB */
>>>> #endif
>>>> dtb_early_pa = dtb_pa;
>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
>>>> uintptr_t va, map_size;
>>>> phys_addr_t pa, start, end;
>>>> u64 i;
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
>>>> +#endif
>>>>
>>>> /**
>>>> * MMU is enabled at this point. But page table setup is not complete yet.
>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
>>>> map_size, PAGE_KERNEL_EXEC);
>>>> }
>>>> }
>>>> +#ifdef CONFIG_XIP_KERNEL
>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
>>>> + for (va = XIP_VIRT_ADDR_START;
>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>> + va += map_size)
>>>> + create_pgd_mapping(swapper_pg_dir, va,
>>>> + CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
>>>> + map_size, PAGE_KERNEL_EXEC);
>>>> +
>>>> +#endif
>>>>
>>>> /* Clear fixmap PTE and PMD mappings */
>>>> clear_fixmap(FIX_PTE);
>>
>> _______________________________________________
>> linux-riscv mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>
Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
>>
>>
>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
>>> <[email protected]> wrote:
>>>>
>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
>>>> wrote:
>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
>>>>> It allows code to be executed directly from non-volatile storage
>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
>>>>> be found on many RISC-V platforms. This makes way for significant
>>>>> optimization of RAM footprint. The XIP kernel is not compressed
>>>>> since it has to run directly from flash, so it will occupy more
>>>>> space on the non-volatile storage. The physical flash address used
>>>>> to link the kernel object files and for storing it has to be known
>>>>> at compile time and is represented by a Kconfig option.
>>>>>
>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
>>>>> kernels.
>>>>>
>>>>> Signed-off-by: Vitaly Wool <[email protected]>
>>>>>
>>>>> ---
>>>>>
>>>>> Changes in v2:
>>>>> - dedicated macro for XIP address fixup when MMU is not enabled yet
>>>>> Â Â o both for 32-bit and 64-bit RISC-V
>>>>> - SP is explicitly set to a safe place in RAM before __copy_data call
>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>>>>> Changes in v3:
>>>>> - rebased against latest for-next
>>>>> - XIP address fixup macro now takes an argument
>>>>> - SMP related fixes
>>>>> Changes in v4:
>>>>> - rebased against the current for-next
>>>>> - less #ifdef's in C/ASM code
>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
>>>>> - Fixed multi-core boot
>>>>> Changes in v5:
>>>>> - fixed build error for non-XIP kernels
>>>>> Changes in v6:
>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
>>>>> Â Â PHYS_RAM_BASE in non-XIP configurations if needed
>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
>>>>> Â Â effects
>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
>>>>
>>>> So v5 landed on for-next, which generally means it's best to avoid
>>>> re-spinning the patch and instead send along fixups. That said, the v5
>>>> is causing some testing failures for me.
>>>>
>>>> I'm going to drop the v5 for now as I don't have time to test this
>>>> tonight. I'll try and take a look soon, as it will conflict with
>>>> Alex's
>>>> patches.
>>>
>>> I can come up with the incremental patch instead pretty much straight
>>> away if that works better.
>>>
>>> ~Vitaly
>>>
>>>>>  arch/riscv/Kconfig                 | 49 ++++++++++-
>>>>>  arch/riscv/Makefile                |  8 +-
>>>>>  arch/riscv/boot/Makefile           | 13 +++
>>>>>  arch/riscv/include/asm/pgtable.h   | 65 ++++++++++++--
>>>>>  arch/riscv/kernel/cpu_ops_sbi.c    | 11 ++-
>>>>> Â arch/riscv/kernel/head.SÂ Â Â Â Â Â Â Â Â Â Â |Â 49 ++++++++++-
>>>>>  arch/riscv/kernel/head.h           |  3 +
>>>>>  arch/riscv/kernel/setup.c          |  8 +-
>>>>> Â arch/riscv/kernel/vmlinux-xip.lds.S | 132
>>>>> ++++++++++++++++++++++++++++
>>>>> Â arch/riscv/kernel/vmlinux.lds.SÂ Â Â Â |Â Â 6 ++
>>>>>  arch/riscv/mm/init.c               | 100 +++++++++++++++++++--
>>>>> Â 11 files changed, 426 insertions(+), 18 deletions(-)
>>>>> Â create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>
>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
>>>>> --- a/arch/riscv/Kconfig
>>>>> +++ b/arch/riscv/Kconfig
>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
>>>>>
>>>>> Â config EFI
>>>>> Â Â Â Â Â Â bool "UEFI runtime support"
>>>>> -Â Â Â Â depends on OF
>>>>> +Â Â Â Â depends on OF && !XIP_KERNEL
>>>>> Â Â Â Â Â Â select LIBFDT
>>>>> Â Â Â Â Â Â select UCS2_STRING
>>>>> Â Â Â Â Â Â select EFI_PARAMS_FROM_FDT
>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
>>>>> Â Â Â Â Â Â def_bool y
>>>>> Â Â Â Â Â Â depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>>>>>
>>>>> +config PHYS_RAM_BASE_FIXED
>>>>> +Â Â Â Â bool "Explicitly specified physical RAM address"
>>>>> +Â Â Â Â default n
>>>>> +
>>>>> +config PHYS_RAM_BASE
>>>>> +Â Â Â Â hex "Platform Physical RAM address"
>>>>> +Â Â Â Â depends on PHYS_RAM_BASE_FIXED
>>>>> +Â Â Â Â default "0x80000000"
>>>>> +Â Â Â Â help
>>>>> +Â Â Â Â Â Â This is the physical address of RAM in the system. It has
>>>>> to be
>>>>> +Â Â Â Â Â Â explicitly specified to run early relocations of read-write
>>>>> data
>>>>> +Â Â Â Â Â Â from flash to RAM.
>>>>> +
>>>>> +config XIP_KERNEL
>>>>> +Â Â Â Â bool "Kernel Execute-In-Place from ROM"
>>>>> +Â Â Â Â depends on MMU
>>>>> +Â Â Â Â select PHYS_RAM_BASE_FIXED
>>>>> +Â Â Â Â help
>>>>> +Â Â Â Â Â Â Execute-In-Place allows the kernel to run from non-volatile
>>>>> storage
>>>>> +Â Â Â Â Â Â directly addressable by the CPU, such as NOR flash. This
>>>>> saves RAM
>>>>> +Â Â Â Â Â Â space since the text section of the kernel is not loaded
>>>>> from flash
>>>>> +      to RAM. Read-write sections, such as the data section and
>>>>> stack,
>>>>> +      are still copied to RAM. The XIP kernel is not compressed
>>>>> since
>>>>> +Â Â Â Â Â Â it has to run directly from flash, so it will take more
>>>>> space to
>>>>> +      store it. The flash address used to link the kernel object
>>>>> files,
>>>>> +Â Â Â Â Â Â and for storing it, is configuration dependent. Therefore,
>>>>> if you
>>>>> +Â Â Â Â Â Â say Y here, you must know the proper physical address where to
>>>>> +Â Â Â Â Â Â store the kernel image depending on your own flash memory
>>>>> usage.
>>>>> +
>>>>> +Â Â Â Â Â Â Also note that the make target becomes "make xipImage"
>>>>> rather than
>>>>> +      "make zImage" or "make Image". The final kernel binary to
>>>>> put in
>>>>> +Â Â Â Â Â Â ROM memory will be arch/riscv/boot/xipImage.
>>>>> +
>>>>> +Â Â Â Â Â Â If unsure, say N.
>>>>> +
>>>>> +config XIP_PHYS_ADDR
>>>>> +Â Â Â Â hex "XIP Kernel Physical Location"
>>>>> +Â Â Â Â depends on XIP_KERNEL
>>>>> +Â Â Â Â default "0x21000000"
>>>>> +Â Â Â Â help
>>>>> +Â Â Â Â Â Â This is the physical address in your flash memory the
>>>>> kernel will
>>>>> +      be linked for and stored to. This address is dependent on
>>>>> your
>>>>> +Â Â Â Â Â Â own flash usage.
>>>>> +
>>>>> Â endmenu
>>>>>
>>>>> Â config BUILTIN_DTB
>>>>> -Â Â Â Â def_bool n
>>>>> +Â Â Â Â bool
>>>>> Â Â Â Â Â Â depends on OF
>>>>> +Â Â Â Â default y if XIP_KERNEL
>>>>>
>>>>> Â menu "Power management options"
>>>>>
>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
>>>>> index 1368d943f1f3..8fcbec03974d 100644
>>>>> --- a/arch/riscv/Makefile
>>>>> +++ b/arch/riscv/Makefile
>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>>>>>
>>>>> Â # Default target when executing plain make
>>>>>  boot        := arch/riscv/boot
>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>> +KBUILD_IMAGE := $(boot)/xipImage
>>>>> +else
>>>>> Â KBUILD_IMAGE := $(boot)/Image.gz
>>>>> +endif
>>>>>
>>>>> Â head-y := arch/riscv/kernel/head.o
>>>>>
>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
>>>>> Â vdso_install:
>>>>> Â Â Â Â Â Â $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>>>>>
>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
>>>>> Â ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
>>>>> Â KBUILD_IMAGE := $(boot)/loader.bin
>>>>> Â else
>>>>> Â KBUILD_IMAGE := $(boot)/Image.gz
>>>>> Â endif
>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
>>>>> +endif
>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>>>>>
>>>>> Â all: $(notdir $(KBUILD_IMAGE))
>>>>>
>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
>>>>> index 03404c84f971..6bf299f70c27 100644
>>>>> --- a/arch/riscv/boot/Makefile
>>>>> +++ b/arch/riscv/boot/Makefile
>>>>> @@ -17,8 +17,21 @@
>>>>> Â KCOV_INSTRUMENT := n
>>>>>
>>>>> Â OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R
>>>>> .comment -S
>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
>>>>> -R .comment -S
>>>>>
>>>>> Â targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>> xipImage
>>>>> +
>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>> +
>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
>>>>> +cmd_mkxip = $(cmd_objcopy)
>>>>> +
>>>>> +$(obj)/xipImage: vmlinux FORCE
>>>>> +Â Â Â Â $(call if_changed,mkxip)
>>>>> +Â Â Â Â @$(kecho) 'Â Physical Address of xipImage:
>>>>> $(CONFIG_XIP_PHYS_ADDR)'
>>>>> +
>>>>> +endif
>>>>>
>>>>> Â $(obj)/Image: vmlinux FORCE
>>>>> Â Â Â Â Â Â $(call if_changed,objcopy)
>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
>>>>> b/arch/riscv/include/asm/pgtable.h
>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
>>>>> --- a/arch/riscv/include/asm/pgtable.h
>>>>> +++ b/arch/riscv/include/asm/pgtable.h
>>>>> @@ -11,6 +11,33 @@
>>>>>
>>>>> Â #include <asm/pgtable-bits.h>
>>>>>
>>>>> +#ifdef CONFIG_MMU
>>>>> +
>>>>> +#define VMALLOC_STARTÂ Â Â (PAGE_OFFSET - VMALLOC_SIZE)
>>>>> +
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +#define VMALLOC_SIZEÂ Â Â Â ((KERN_VIRT_SIZE >> 1) - SZ_16M)
>>>>> +#define VMALLOC_ENDÂ Â Â Â Â (PAGE_OFFSET - SZ_16M - 1)
>>>>> +
>>>>> +#define XIP_OFFSETÂ Â Â Â Â Â Â Â Â Â SZ_8M
>>>>> +#define XIP_MASKÂ Â Â Â Â Â Â Â Â Â Â Â (SZ_8M - 1)
>>>>> +#define XIP_VIRT_ADDR(physaddr)Â Â Â Â Â \
>>>>> +Â Â Â Â (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
>>>>> +
>>>>> +#else
>>>>> +
>>>>> +#define VMALLOC_SIZEÂ Â Â Â (KERN_VIRT_SIZE >> 1)
>>>>> +#define VMALLOC_ENDÂ Â Â Â Â (PAGE_OFFSET - 1)
>>>>> +
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>> +
>>>>> +#else
>>>>> +
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>> +#endif /* CONFIG_MMU */
>>>>> +
>>>>> Â #ifndef __ASSEMBLY__
>>>>>
>>>>> Â /* Page Upper Directory not used in RISC-V */
>>>>> @@ -21,9 +48,25 @@
>>>>>
>>>>> Â #ifdef CONFIG_MMU
>>>>>
>>>>> -#define VMALLOC_SIZEÂ Â Â Â (KERN_VIRT_SIZE >> 1)
>>>>> -#define VMALLOC_ENDÂ Â Â Â Â (PAGE_OFFSET - 1)
>>>>> -#define VMALLOC_STARTÂ Â Â (PAGE_OFFSET - VMALLOC_SIZE)
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +/*
>>>>> + * Since we use sections to map it, this macro replaces the
>>>>> physical address
>>>>> + * with its virtual address while keeping offset from the base
>>>>> section.
>>>>> + */
>>>>> +#define XIP_PHYS_ADDR(va)Â Â Â Â \
>>>>> +Â Â Â Â ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
>>>>> CONFIG_XIP_PHYS_ADDR)
>>>>> +
>>>>> +#define XIP_VIRT_ADDR_STARTÂ XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>> +
>>>>> +#define XIP_FIXUP(addr)Â Â Â Â Â Â Â Â Â Â Â Â Â ({ \
>>>>> +Â Â Â Â uintptr_t __a = (uintptr_t)(addr); \
>>>>> +Â Â Â Â (__a >= CONFIG_XIP_PHYS_ADDR && \
>>>>> +Â Â Â Â Â __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
>>>>> +Â Â Â Â __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
>>>>> XIP_OFFSET : __a; \
>>>>> +})
>>>>> +#else
>>>>> +#define XIP_FIXUP(addr)Â Â Â Â Â Â Â Â Â Â Â Â Â (addr)
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>
>>>>> Â #define BPF_JIT_REGION_SIZEÂ (SZ_128M)
>>>>> Â #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
>>>>> @@ -484,8 +527,20 @@ static inline int
>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
>>>>>
>>>>> Â #define kern_addr_valid(addr)Â Â (1) /* FIXME */
>>>>>
>>>>> -extern void *dtb_early_va;
>>>>> -extern uintptr_t dtb_early_pa;
>>>>> +extern void *_dtb_early_va;
>>>>> +extern uintptr_t _dtb_early_pa;
>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
>>>>> +
>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
>>>>> +
>>>>> +#else
>>>>> +
>>>>> +#define dtb_early_va _dtb_early_va
>>>>> +#define dtb_early_pa _dtb_early_pa
>>>>> +
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>> +
>>>>> Â void setup_bootmem(void);
>>>>> Â void paging_init(void);
>>>>> Â void misc_mem_init(void);
>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>> index 685fae72b7f5..2413c2997350 100644
>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
>>>>> long hartid)
>>>>> Â }
>>>>> Â #endif
>>>>>
>>>>> +static inline unsigned long get_secondary_start_phys(void)
>>>>> +{
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +Â Â Â Â return XIP_PHYS_ADDR(secondary_start_sbi);
>>>>> +#else
>>>>> +Â Â Â Â return __pa_symbol(secondary_start_sbi);
>>>>> +#endif
>>>>> +}
>>>>> +
>>>>> Â static int sbi_cpu_start(unsigned int cpuid, struct task_struct
>>>>> *tidle)
>>>>> Â {
>>>>> Â Â Â Â Â Â int rc;
>>>>> -Â Â Â Â unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
>>>>> +Â Â Â Â unsigned long boot_addr = get_secondary_start_phys();
>>>>> Â Â Â Â Â Â int hartid = cpuid_to_hartid_map(cpuid);
>>>>>
>>>>> Â Â Â Â Â Â cpu_update_secondary_bootdata(cpuid, tidle);
>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>>>>> index f5a9bad86e58..bbe74e37914f 100644
>>>>> --- a/arch/riscv/kernel/head.S
>>>>> +++ b/arch/riscv/kernel/head.S
>>>>> @@ -9,11 +9,23 @@
>>>>> Â #include <linux/linkage.h>
>>>>> Â #include <asm/thread_info.h>
>>>>> Â #include <asm/page.h>
>>>>> +#include <asm/pgtable.h>
>>>>> Â #include <asm/csr.h>
>>>>> Â #include <asm/hwcap.h>
>>>>> Â #include <asm/image.h>
>>>>> Â #include "efi-header.S"
>>>>>
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>> +Â Â Â Â REG_L t0, _xip_fixup
>>>>> +Â Â Â Â add \reg, \reg, t0
>>>>> +.endm
>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
>>>>> XIP_OFFSET
>>>>> +#else
>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>> +.endm
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>> +
>>>>> Â __HEAD
>>>>> Â ENTRY(_start)
>>>>> Â Â Â Â Â Â /*
>>>>> @@ -69,7 +81,11 @@ pe_head_start:
>>>>> Â #ifdef CONFIG_MMU
>>>>> Â relocate:
>>>>> Â Â Â Â Â Â /* Relocate return address */
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +Â Â Â Â li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>> +#else
>>>>> Â Â Â Â Â Â li a1, PAGE_OFFSET
>>>>> +#endif
>>>>> Â Â Â Â Â Â la a2, _start
>>>>> Â Â Â Â Â Â sub a1, a1, a2
>>>>> Â Â Â Â Â Â add ra, ra, a1
>>>>> @@ -91,6 +107,7 @@ relocate:
>>>>> Â Â Â Â Â Â Â * to ensure the new translations are in use.
>>>>> Â Â Â Â Â Â Â */
>>>>> Â Â Â Â Â Â la a0, trampoline_pg_dir
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a0
>>>>> Â Â Â Â Â Â srl a0, a0, PAGE_SHIFT
>>>>> Â Â Â Â Â Â or a0, a0, a1
>>>>> Â Â Â Â Â Â sfence.vma
>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
>>>>>
>>>>> Â Â Â Â Â Â slli a3, a0, LGREG
>>>>> Â Â Â Â Â Â la a4, __cpu_up_stack_pointer
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a4
>>>>> Â Â Â Â Â Â la a5, __cpu_up_task_pointer
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a5
>>>>> Â Â Â Â Â Â add a4, a3, a4
>>>>> Â Â Â Â Â Â add a5, a3, a5
>>>>> Â Â Â Â Â Â REG_L sp, (a4)
>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
>>>>> Â #ifdef CONFIG_MMU
>>>>> Â Â Â Â Â Â /* Enable virtual memory and relocate to virtual address */
>>>>> Â Â Â Â Â Â la a0, swapper_pg_dir
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a0
>>>>> Â Â Â Â Â Â call relocate
>>>>> Â #endif
>>>>> Â Â Â Â Â Â call setup_trap_vector
>>>>> @@ -236,12 +256,33 @@ pmp_done:
>>>>> Â .Lgood_cores:
>>>>> Â #endif
>>>>>
>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>> Â Â Â Â Â Â /* Pick one hart to run the main boot sequence */
>>>>> Â Â Â Â Â Â la a3, hart_lottery
>>>>> Â Â Â Â Â Â li a2, 1
>>>>> Â Â Â Â Â Â amoadd.w a3, a2, (a3)
>>>>> Â Â Â Â Â Â bnez a3, .Lsecondary_start
>>>>>
>>>>> +#else
>>>>> +Â Â Â Â /* hart_lottery in flash contains a magic number */
>>>>> +Â Â Â Â la a3, hart_lottery
>>>>> +Â Â Â Â mv a2, a3
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a2
>>>>> +Â Â Â Â lw t1, (a3)
>>>>> +Â Â Â Â amoswap.w t0, t1, (a2)
>>>>> +Â Â Â Â /* first time here if hart_lottery in RAM is not set */
>>>>> +Â Â Â Â beq t0, t1, .Lsecondary_start
>>>>> +
>>>>> +Â Â Â Â la sp, _end + THREAD_SIZE
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET sp
>>>>> +Â Â Â Â mv s0, a0
>>>>> +Â Â Â Â call __copy_data
>>>>> +
>>>>> +Â Â Â Â /* Restore a0 copy */
>>>>> +Â Â Â Â mv a0, s0
>>>>> +#endif
>>>>> +
>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>> Â Â Â Â Â Â /* Clear BSS for flat non-ELF images */
>>>>> Â Â Â Â Â Â la a3, __bss_start
>>>>> Â Â Â Â Â Â la a4, __bss_stop
>>>>> @@ -251,15 +292,18 @@ clear_bss:
>>>>> Â Â Â Â Â Â add a3, a3, RISCV_SZPTR
>>>>> Â Â Â Â Â Â blt a3, a4, clear_bss
>>>>> Â clear_bss_done:
>>>>> -
>>>>> +#endif
>>>>> Â Â Â Â Â Â /* Save hart ID and DTB physical address */
>>>>> Â Â Â Â Â Â mv s0, a0
>>>>> Â Â Â Â Â Â mv s1, a1
>>>>> +
>>>>> Â Â Â Â Â Â la a2, boot_cpu_hartid
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a2
>>>>> Â Â Â Â Â Â REG_S a0, (a2)
>>>>>
>>>>> Â Â Â Â Â Â /* Initialize page tables and relocate to virtual addresses */
>>>>> Â Â Â Â Â Â la sp, init_thread_union + THREAD_SIZE
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET sp
>>>>> Â #ifdef CONFIG_BUILTIN_DTB
>>>>> Â Â Â Â Â Â la a0, __dtb_start
>>>>> Â #else
>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
>>>>> Â Â Â Â Â Â call setup_vm
>>>>> Â #ifdef CONFIG_MMU
>>>>> Â Â Â Â Â Â la a0, early_pg_dir
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a0
>>>>> Â Â Â Â Â Â call relocate
>>>>> Â #endif /* CONFIG_MMU */
>>>>>
>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
>>>>>
>>>>> Â Â Â Â Â Â slli a3, a0, LGREG
>>>>> Â Â Â Â Â Â la a1, __cpu_up_stack_pointer
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a1
>>>>> Â Â Â Â Â Â la a2, __cpu_up_task_pointer
>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a2
>>>>> Â Â Â Â Â Â add a1, a3, a1
>>>>> Â Â Â Â Â Â add a2, a3, a2
>>>>>
>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
>>>>> --- a/arch/riscv/kernel/head.h
>>>>> +++ b/arch/riscv/kernel/head.h
>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>>>>>
>>>>> Â asmlinkage void do_page_fault(struct pt_regs *regs);
>>>>> Â asmlinkage void __init setup_vm(uintptr_t dtb_pa);
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +asmlinkage void __init __copy_data(void);
>>>>> +#endif
>>>>>
>>>>> Â extern void *__cpu_up_stack_pointer[];
>>>>> Â extern void *__cpu_up_task_pointer[];
>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>>>>> index e85bacff1b50..a0384c72c272 100644
>>>>> --- a/arch/riscv/kernel/setup.c
>>>>> +++ b/arch/riscv/kernel/setup.c
>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
>>>>> __section(".data") = {
>>>>> Â Â * This is used before the kernel initializes the BSS so it can't
>>>>> be in the
>>>>> Â Â * BSS.
>>>>> Â Â */
>>>>> -atomic_t hart_lottery __section(".sdata");
>>>>> +atomic_t hart_lottery __section(".sdata")
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> += ATOMIC_INIT(0xC001BEEF)
>>>>> +#endif
>>>>> +;
>>>>> Â unsigned long boot_cpu_hartid;
>>>>> Â static DEFINE_PER_CPU(struct cpu, cpu_devices);
>>>>>
>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
>>>>> Â #if IS_ENABLED(CONFIG_BUILTIN_DTB)
>>>>> Â Â Â Â Â Â unflatten_and_copy_device_tree();
>>>>> Â #else
>>>>> -Â Â Â Â if (early_init_dt_verify(__va(dtb_early_pa)))
>>>>> +Â Â Â Â if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â unflatten_device_tree();
>>>>> Â Â Â Â Â Â else
>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("No DTB found in kernel mappings\n");
>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>> new file mode 100644
>>>>> index 000000000000..9f0f08c34cd3
>>>>> --- /dev/null
>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>> @@ -0,0 +1,132 @@
>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>>>> +/*
>>>>> + * Copyright (C) 2012 Regents of the University of California
>>>>> + * Copyright (C) 2017 SiFive
>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
>>>>> + */
>>>>> +
>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>> +/* No __ro_after_init data in the .rodata section - which will
>>>>> always be ro */
>>>>> +#define RO_AFTER_INIT_DATA
>>>>> +
>>>>> +#include <asm/vmlinux.lds.h>
>>>>> +#include <asm/page.h>
>>>>> +#include <asm/pgtable.h>
>>>>> +#include <asm/cache.h>
>>>>> +#include <asm/thread_info.h>
>>>>> +
>>>>> +OUTPUT_ARCH(riscv)
>>>>> +ENTRY(_start)
>>>>> +
>>>>> +jiffies = jiffies_64;
>>>>> +
>>>>> +SECTIONS
>>>>> +{
>>>>> +Â Â Â Â /* Beginning of code and text segment */
>>>>> +Â Â Â Â . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
>>>>> +Â Â Â Â _xiprom = .;
>>>>> +Â Â Â Â _start = .;
>>>>> +Â Â Â Â HEAD_TEXT_SECTION
>>>>> +Â Â Â Â INIT_TEXT_SECTION(PAGE_SIZE)
>>>>> +Â Â Â Â /* we have to discard exit text and such at runtime, not link
>>>>> time */
>>>>> +Â Â Â Â .exit.text :
>>>>> +Â Â Â Â {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â EXIT_TEXT
>>>>> +Â Â Â Â }
>>>>> +
>>>>> +Â Â Â Â .text : {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â _text = .;
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â _stext = .;
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â TEXT_TEXT
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â SCHED_TEXT
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â CPUIDLE_TEXT
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â LOCK_TEXT
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â KPROBES_TEXT
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â ENTRY_TEXT
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â IRQENTRY_TEXT
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â SOFTIRQENTRY_TEXT
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.fixup)
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â _etext = .;
>>>>> +Â Â Â Â }
>>>>> +Â Â Â Â RO_DATA(L1_CACHE_BYTES)
>>>>> +Â Â Â Â .srodata : {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.srodata*)
>>>>> +Â Â Â Â }
>>>>> +Â Â Â Â .init.rodata : {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_SETUP(16)
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_CALLS
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â CON_INITCALL
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_RAM_FS
>>>>> +Â Â Â Â }
>>>>> +Â Â Â Â _exiprom = .;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* End of XIP ROM area */
>>>>> +
>>>>> +
>>>>> +/*
>>>>> + * From this point, stuff is considered writable and will be
>>>>> copied to RAM
>>>>> + */
>>>>> +Â Â Â Â __data_loc = ALIGN(16);Â Â Â Â Â Â Â Â /* location in file */
>>>>> +Â Â Â Â . = PAGE_OFFSET;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* location in memory */
>>>>> +
>>>>> +Â Â Â Â _sdata = .;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* Start of data section */
>>>>> +Â Â Â Â _data = .;
>>>>> +Â Â Â Â RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
>>>>> +Â Â Â Â _edata = .;
>>>>> +Â Â Â Â __start_ro_after_init = .;
>>>>> +Â Â Â Â .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
>>>>> LOAD_OFFSET) {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.data..ro_after_init)
>>>>> +Â Â Â Â }
>>>>> +Â Â Â Â __end_ro_after_init = .;
>>>>> +
>>>>> +Â Â Â Â . = ALIGN(PAGE_SIZE);
>>>>> +Â Â Â Â __init_begin = .;
>>>>> +Â Â Â Â .init.data : {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_DATA
>>>>> +Â Â Â Â }
>>>>> +Â Â Â Â .exit.data : {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â EXIT_DATA
>>>>> +Â Â Â Â }
>>>>> +Â Â Â Â . = ALIGN(8);
>>>>> +Â Â Â Â __soc_early_init_table : {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_early_init_table_start = .;
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â KEEP(*(__soc_early_init_table))
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_early_init_table_end = .;
>>>>> +Â Â Â Â }
>>>>> +Â Â Â Â __soc_builtin_dtb_table : {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_builtin_dtb_table_start = .;
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â KEEP(*(__soc_builtin_dtb_table))
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_builtin_dtb_table_end = .;
>>>>> +Â Â Â Â }
>>>>> +Â Â Â Â PERCPU_SECTION(L1_CACHE_BYTES)
>>>>> +
>>>>> +Â Â Â Â . = ALIGN(PAGE_SIZE);
>>>>> +Â Â Â Â __init_end = .;
>>>>> +
>>>>> +Â Â Â Â .sdata : {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __global_pointer$ = . + 0x800;
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.sdata*)
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.sbss*)
>>>>> +Â Â Â Â }
>>>>> +
>>>>> +Â Â Â Â BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>>>>> +Â Â Â Â EXCEPTION_TABLE(0x10)
>>>>> +
>>>>> +Â Â Â Â .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.rel.dyn*)
>>>>> +Â Â Â Â }
>>>>> +
>>>>> +Â Â Â Â /*
>>>>> +Â Â Â Â Â * End of copied data. We need a dummy section to get its LMA.
>>>>> +Â Â Â Â Â * Also located before final ALIGN() as trailing padding is
>>>>> not stored
>>>>> +Â Â Â Â Â * in the resulting binary file and useless to copy.
>>>>> +Â Â Â Â Â */
>>>>> +Â Â Â Â .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
>>>>> +Â Â Â Â _edata_loc = LOADADDR(.data.endmark);
>>>>> +
>>>>> +Â Â Â Â . = ALIGN(PAGE_SIZE);
>>>>> +Â Â Â Â _end = .;
>>>>> +
>>>>> +Â Â Â Â STABS_DEBUG
>>>>> +Â Â Â Â DWARF_DEBUG
>>>>> +
>>>>> +Â Â Â Â DISCARDS
>>>>> +}
>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
>>>>> b/arch/riscv/kernel/vmlinux.lds.S
>>>>> index de03cb22d0e9..6745ec325930 100644
>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
>>>>> @@ -4,7 +4,12 @@
>>>>> Â Â * Copyright (C) 2017 SiFive
>>>>> Â Â */
>>>>>
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +#include "vmlinux-xip.lds.S"
>>>>> +#else
>>>>> +
>>>>> Â #define LOAD_OFFSET PAGE_OFFSET
>>>>> +
>>>>> Â #include <asm/vmlinux.lds.h>
>>>>> Â #include <asm/page.h>
>>>>> Â #include <asm/cache.h>
>>>>> @@ -132,3 +137,4 @@ SECTIONS
>>>>>
>>>>> Â Â Â Â Â Â DISCARDS
>>>>> Â }
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
>>>>> index 7f5036fbee8c..efe649d41f95 100644
>>>>> --- a/arch/riscv/mm/init.c
>>>>> +++ b/arch/riscv/mm/init.c
>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>>>>>
>>>>> Â extern char _start[];
>>>>> Â #define DTB_EARLY_BASE_VAÂ Â Â Â Â PGDIR_SIZE
>>>>> -void *dtb_early_va __initdata;
>>>>> -uintptr_t dtb_early_pa __initdata;
>>>>> +void *_dtb_early_va __initdata;
>>>>> +uintptr_t _dtb_early_pa __initdata;
>>>>>
>>>>> Â struct pt_alloc_ops {
>>>>> Â Â Â Â Â Â pte_t *(*get_pte_virt)(phys_addr_t pa);
>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)VMALLOC_END);
>>>>> Â Â Â Â Â Â print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)high_memory);
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +Â Â Â Â print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>> Â }
>>>>> Â #else
>>>>> Â static void print_vm_layout(void) { }
>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
>>>>> Â Â Â Â Â Â phys_addr_t dram_end = memblock_end_of_DRAM();
>>>>> Â Â Â Â Â Â phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>>>>>
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +Â Â Â Â vmlinux_start = __pa_symbol(&_sdata);
>>>>> +#endif
>>>>> +
>>>>> Â Â Â Â Â Â /* The maximal physical memory size is -PAGE_OFFSET. */
>>>>> Â Â Â Â Â Â memblock_enforce_memory_limit(-PAGE_OFFSET);
>>>>>
>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
>>>>> Â Â Â Â Â Â memblock_allow_resize();
>>>>> Â }
>>>>>
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +
>>>>> +extern char _xiprom[], _exiprom[];
>>>>> +extern char _sdata[], _edata[];
>>>>> +
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>> +
>>>>> Â #ifdef CONFIG_MMU
>>>>> -static struct pt_alloc_ops pt_ops;
>>>>> +static struct pt_alloc_ops _pt_ops;
>>>>> +
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
>>>>> +#else
>>>>> +#define pt_ops      _pt_ops
>>>>> +#endif
>>>>>
>>>>> Â unsigned long va_pa_offset;
>>>>> Â EXPORT_SYMBOL(va_pa_offset);
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
>>>>> +#endif
>>>>> Â unsigned long pfn_base;
>>>>> Â EXPORT_SYMBOL(pfn_base);
>>>>>
>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
>>>>> __page_aligned_bss;
>>>>>
>>>>> Â pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
>>>>>
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +#define trampoline_pg_dir   ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
>>>>> +#define fixmap_pte          ((pte_t *)XIP_FIXUP(fixmap_pte))
>>>>> +#define early_pg_dir        ((pgd_t *)XIP_FIXUP(early_pg_dir))
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>> +
>>>>> Â void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
>>>>> pgprot_t prot)
>>>>> Â {
>>>>> Â Â Â Â Â Â unsigned long addr = __fix_to_virt(idx);
>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
>>>>> __page_aligned_bss;
>>>>> Â pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>> Â pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>>
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>>>> +
>>>>> +#define trampoline_pmd      ((pmd_t *)XIP_FIXUP(trampoline_pmd))
>>>>> +#define fixmap_pmd  ((pmd_t *)XIP_FIXUP(fixmap_pmd))
>>>>> +#define xip_pmd             ((pmd_t *)XIP_FIXUP(xip_pmd))
>>>>> +#define early_pmd   ((pmd_t *)XIP_FIXUP(early_pmd))
>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>> +
>>>>> Â static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
>>>>> Â {
>>>>> Â Â Â Â Â Â /* Before MMU is enabled */
>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>> Â Â Â Â Â Â return PMD_SIZE;
>>>>> Â }
>>>>>
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +/* called from head.S with MMU off */
>>>>> +asmlinkage void __init __copy_data(void)
>>>>> +{
>>>>> +Â Â Â Â void *from = (void *)(&_sdata);
>>>>> +Â Â Â Â void *end = (void *)(&_end);
>>>>> +Â Â Â Â void *to = (void *)CONFIG_PHYS_RAM_BASE;
>>>>> +Â Â Â Â size_t sz = (size_t)(end - from);
>>>>> +
>>>>> +Â Â Â Â memcpy(to, from, sz);
>>>>> +}
>>>>> +#endif
>>>>> +
>>>>> Â /*
>>>>> Â Â * setup_vm() is called from head.S with MMU-off.
>>>>> Â Â *
>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>
>>>>> Â asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>> Â {
>>>>> -Â Â Â Â uintptr_t va, pa, end_va;
>>>>> +Â Â Â Â uintptr_t va, end_va;
>>>>> +Â Â Â Â uintptr_t __maybe_unused pa;
>>>>> Â Â Â Â Â Â uintptr_t load_pa = (uintptr_t)(&_start);
>>>>> Â Â Â Â Â Â uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
>>>>> Â Â Â Â Â Â uintptr_t map_size;
>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>> Â Â Â Â Â Â pmd_t fix_bmap_spmd, fix_bmap_epmd;
>>>>> Â #endif
>>>>>
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +Â Â Â Â uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
>>>>> +Â Â Â Â uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>> (uintptr_t)(&_xiprom);
>>>>> +
>>>>> +Â Â Â Â load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
>>>>> +Â Â Â Â load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
>>>>> +#endif
>>>>> Â Â Â Â Â Â va_pa_offset = PAGE_OFFSET - load_pa;
>>
>> I should have seen this before, I was too focused on having a XIP kernel
>> boot. I already moved the kernel mapping in the vmalloc zone: the
>> virtual to physical translations need to be handled differently now that
>> the kernel mapping does not lie into linear mapping anymore, we can't
>> use va_pa_offset defined above for both mappings.
>>
>> I was rebasing my patchset on the XIP patch but I believe that doing the
>> other way around would greatly simplify the XIP patch as the kernel
>> mapping would already be moved outside the linear mapping, there would
>> be no need to reserve a zone in vmalloc anymore (that simplifies
>> pgtable.h quite a lot). And the XIP kernel mapping could be implemented
>> in a new create_kernel_page_table (that would also simplify mm/init.c).
>>
>> I can help to do that but I don't think we should merge this patch as is
>> now.
>
> I think that's the right way to go for now: it's a lot harder to test
> the XIP stuff, as it requires a bunch of harness changes. So let's take
> the page table refactoring in now and rebase this stuff on top of it.
> There's really no way to do both without making more work for someone,
> it's just a headache on timing.
>
> Alex: if you want to sign up to spend some time there that'd be great,
> otherwise I will.
I can take care of that, no problem.
> Either way, can you point me (either just indicate
> the old version is OK or send a new one) to what you want me to look at
> WRT the page table code? IIRC it looked pretty much fine, but I'll take
> another look ASAP so we can avoid serializing everything.
The v3 is fine for me:
https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
>
>>
>> Alex
>>
>>>>> Â Â Â Â Â Â pfn_base = PFN_DOWN(load_pa);
>>>>>
>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
>>>>> Â #endif
>>>>>
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +Â Â Â Â create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>>>> +Â Â Â Â for (va = XIP_VIRT_ADDR_START;
>>>>> +Â Â Â Â Â Â Â Â Â va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>> +Â Â Â Â Â Â Â Â Â va += PMD_SIZE) {
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â create_pmd_mapping(xip_pmd, va,
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â xiprom + (va - XIP_VIRT_ADDR_START),
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â PMD_SIZE, PAGE_KERNEL_EXEC);
>>>>> +Â Â Â Â }
>>>>> +
>>>>> +Â Â Â Â create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>>>> +#endif
>>>>> +
>>>>> Â Â Â Â Â Â /*
>>>>> Â Â Â Â Â Â Â * Setup early PGD covering entire kernel which will allows
>>>>> Â Â Â Â Â Â Â * us to reach paging_init(). We map all memory banks later
>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
>>>>> Â Â Â Â Â Â dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>> (PMD_SIZE - 1));
>>>>> Â #else /* CONFIG_BUILTIN_DTB */
>>>>> -Â Â Â Â dtb_early_va = __va(dtb_pa);
>>>>> +Â Â Â Â dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>> Â #endif /* CONFIG_BUILTIN_DTB */
>>>>> Â #else
>>>>> Â #ifndef CONFIG_BUILTIN_DTB
>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
>>>>> Â Â Â Â Â Â dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>> (PGDIR_SIZE - 1));
>>>>> Â #else /* CONFIG_BUILTIN_DTB */
>>>>> -Â Â Â Â dtb_early_va = __va(dtb_pa);
>>>>> +Â Â Â Â dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>> Â #endif /* CONFIG_BUILTIN_DTB */
>>>>> Â #endif
>>>>> Â Â Â Â Â Â dtb_early_pa = dtb_pa;
>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
>>>>> Â Â Â Â Â Â uintptr_t va, map_size;
>>>>> Â Â Â Â Â Â phys_addr_t pa, start, end;
>>>>> Â Â Â Â Â Â u64 i;
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +Â Â Â Â uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>> (uintptr_t)(&_xiprom);
>>>>> +#endif
>>>>>
>>>>> Â Â Â Â Â Â /**
>>>>> Â Â Â Â Â Â Â * MMU is enabled at this point. But page table setup is not
>>>>> complete yet.
>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â map_size, PAGE_KERNEL_EXEC);
>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â }
>>>>> Â Â Â Â Â Â }
>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>> +Â Â Â Â map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
>>>>> +Â Â Â Â for (va = XIP_VIRT_ADDR_START;
>>>>> +Â Â Â Â Â Â Â Â Â va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>> +Â Â Â Â Â Â Â Â Â va += map_size)
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â create_pgd_mapping(swapper_pg_dir, va,
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â CONFIG_XIP_PHYS_ADDR + (va -
>>>>> XIP_VIRT_ADDR_START),
>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â map_size, PAGE_KERNEL_EXEC);
>>>>> +
>>>>> +#endif
>>>>>
>>>>> Â Â Â Â Â Â /* Clear fixmap PTE and PMD mappings */
>>>>> Â Â Â Â Â Â clear_fixmap(FIX_PTE);
>>>
>>> _______________________________________________
>>> linux-riscv mailing list
>>> [email protected]
>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Hi，some error when enable XIP_KERNEL config，ARCH_HAS_STRICT_KERNEL_RWX
should disable when enable XIP_KERNEL，
but there
riscv64-linux-ld: section .data LMA [0000000000800000,00000000008cd37f]
overlaps section .rodata LMA [0000000000706bc0,000000000085dd67]
riscv64-linux-ld: section .pci_fixup LMA
[000000000085dd68,0000000000861397] overlaps section .data LMA
[0000000000800000,00000000008cd37f]
riscv64-linux-ld: arch/riscv/mm/init.o: in function `.L138':
init.c:(.text+0x232): undefined reference to `__init_text_begin'
riscv64-linux-ld: arch/riscv/mm/init.o: in function
`protect_kernel_text_data':
init.c:(.text+0x23a): undefined reference to `__init_data_begin'
riscv64-linux-ld: init.c:(.text+0x28c): undefined reference to
`__init_text_begin'
riscv64-linux-ld: init.c:(.text+0x2a0): undefined reference to
`__init_data_begin'
On 2021/3/22 8:12, Vitaly Wool wrote:
> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> It allows code to be executed directly from non-volatile storage
> directly addressable by the CPU, such as QSPI NOR flash which can
> be found on many RISC-V platforms. This makes way for significant
> optimization of RAM footprint. The XIP kernel is not compressed
> since it has to run directly from flash, so it will occupy more
> space on the non-volatile storage. The physical flash address used
> to link the kernel object files and for storing it has to be known
> at compile time and is represented by a Kconfig option.
>
> XIP on RISC-V will for the time being only work on MMU-enabled
> kernels.
>
> Signed-off-by: Vitaly Wool <[email protected]>
>
> ---
>
> Changes in v2:
> - dedicated macro for XIP address fixup when MMU is not enabled yet
> o both for 32-bit and 64-bit RISC-V
> - SP is explicitly set to a safe place in RAM before __copy_data call
> - removed redundant alignment requirements in vmlinux-xip.lds.S
> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> Changes in v3:
> - rebased against latest for-next
> - XIP address fixup macro now takes an argument
> - SMP related fixes
> Changes in v4:
> - rebased against the current for-next
> - less #ifdef's in C/ASM code
> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> - C-specific definitions moved into #ifndef __ASSEMBLY__
> - Fixed multi-core boot
> Changes in v5:
> - fixed build error for non-XIP kernels
> Changes in v6:
> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> PHYS_RAM_BASE in non-XIP configurations if needed
> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
> effects
> - fixed crash for non-XIP kernels that don't use built-in DTB
>
> arch/riscv/Kconfig | 49 ++++++++++-
> arch/riscv/Makefile | 8 +-
> arch/riscv/boot/Makefile | 13 +++
> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> arch/riscv/kernel/head.S | 49 ++++++++++-
> arch/riscv/kernel/head.h | 3 +
> arch/riscv/kernel/setup.c | 8 +-
> arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++++
> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> 11 files changed, 426 insertions(+), 18 deletions(-)
> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 8ea60a0a19ae..bd6f82240c34 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -441,7 +441,7 @@ config EFI_STUB
>
> config EFI
> bool "UEFI runtime support"
> - depends on OF
> + depends on OF && !XIP_KERNEL
> select LIBFDT
> select UCS2_STRING
> select EFI_PARAMS_FROM_FDT
> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> def_bool y
> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>
> +config PHYS_RAM_BASE_FIXED
> + bool "Explicitly specified physical RAM address"
> + default n
> +
> +config PHYS_RAM_BASE
> + hex "Platform Physical RAM address"
> + depends on PHYS_RAM_BASE_FIXED
> + default "0x80000000"
> + help
> + This is the physical address of RAM in the system. It has to be
> + explicitly specified to run early relocations of read-write data
> + from flash to RAM.
> +
> +config XIP_KERNEL
> + bool "Kernel Execute-In-Place from ROM"
> + depends on MMU
> + select PHYS_RAM_BASE_FIXED
> + help
> + Execute-In-Place allows the kernel to run from non-volatile storage
> + directly addressable by the CPU, such as NOR flash. This saves RAM
> + space since the text section of the kernel is not loaded from flash
> + to RAM. Read-write sections, such as the data section and stack,
> + are still copied to RAM. The XIP kernel is not compressed since
> + it has to run directly from flash, so it will take more space to
> + store it. The flash address used to link the kernel object files,
> + and for storing it, is configuration dependent. Therefore, if you
> + say Y here, you must know the proper physical address where to
> + store the kernel image depending on your own flash memory usage.
> +
> + Also note that the make target becomes "make xipImage" rather than
> + "make zImage" or "make Image". The final kernel binary to put in
> + ROM memory will be arch/riscv/boot/xipImage.
> +
> + If unsure, say N.
> +
> +config XIP_PHYS_ADDR
> + hex "XIP Kernel Physical Location"
> + depends on XIP_KERNEL
> + default "0x21000000"
> + help
> + This is the physical address in your flash memory the kernel will
> + be linked for and stored to. This address is dependent on your
> + own flash usage.
> +
> endmenu
>
> config BUILTIN_DTB
> - def_bool n
> + bool
> depends on OF
> + default y if XIP_KERNEL
>
> menu "Power management options"
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index 1368d943f1f3..8fcbec03974d 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>
> # Default target when executing plain make
> boot := arch/riscv/boot
> +ifeq ($(CONFIG_XIP_KERNEL),y)
> +KBUILD_IMAGE := $(boot)/xipImage
> +else
> KBUILD_IMAGE := $(boot)/Image.gz
> +endif
>
> head-y := arch/riscv/kernel/head.o
>
> @@ -95,12 +99,14 @@ PHONY += vdso_install
> vdso_install:
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>
> +ifneq ($(CONFIG_XIP_KERNEL),y)
> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> KBUILD_IMAGE := $(boot)/loader.bin
> else
> KBUILD_IMAGE := $(boot)/Image.gz
> endif
> -BOOT_TARGETS := Image Image.gz loader loader.bin
> +endif
> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>
> all: $(notdir $(KBUILD_IMAGE))
>
> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> index 03404c84f971..6bf299f70c27 100644
> --- a/arch/riscv/boot/Makefile
> +++ b/arch/riscv/boot/Makefile
> @@ -17,8 +17,21 @@
> KCOV_INSTRUMENT := n
>
> OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
>
> targets := Image Image.* loader loader.o loader.lds loader.bin
> +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
> +
> +ifeq ($(CONFIG_XIP_KERNEL),y)
> +
> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> +cmd_mkxip = $(cmd_objcopy)
> +
> +$(obj)/xipImage: vmlinux FORCE
> + $(call if_changed,mkxip)
> + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
> +
> +endif
>
> $(obj)/Image: vmlinux FORCE
> $(call if_changed,objcopy)
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index ebf817c1bdf4..21a9b2f8d1c7 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -11,6 +11,33 @@
>
> #include <asm/pgtable-bits.h>
>
> +#ifdef CONFIG_MMU
> +
> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +
> +#ifdef CONFIG_XIP_KERNEL
> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> +
> +#define XIP_OFFSET SZ_8M
> +#define XIP_MASK (SZ_8M - 1)
> +#define XIP_VIRT_ADDR(physaddr) \
> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> +
> +#else
> +
> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> +#define VMALLOC_END (PAGE_OFFSET - 1)
> +
> +#endif /* CONFIG_XIP_KERNEL */
> +
> +#else
> +
> +#ifdef CONFIG_XIP_KERNEL
> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> +#endif /* CONFIG_XIP_KERNEL */
> +#endif /* CONFIG_MMU */
> +
> #ifndef __ASSEMBLY__
>
> /* Page Upper Directory not used in RISC-V */
> @@ -21,9 +48,25 @@
>
> #ifdef CONFIG_MMU
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +#ifdef CONFIG_XIP_KERNEL
> +/*
> + * Since we use sections to map it, this macro replaces the physical address
> + * with its virtual address while keeping offset from the base section.
> + */
> +#define XIP_PHYS_ADDR(va) \
> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
> +
> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> +
> +#define XIP_FIXUP(addr) ({ \
> + uintptr_t __a = (uintptr_t)(addr); \
> + (__a >= CONFIG_XIP_PHYS_ADDR && \
> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET : __a; \
> +})
> +#else
> +#define XIP_FIXUP(addr) (addr)
> +#endif /* CONFIG_XIP_KERNEL */
>
> #define BPF_JIT_REGION_SIZE (SZ_128M)
> #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> @@ -484,8 +527,20 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
>
> #define kern_addr_valid(addr) (1) /* FIXME */
>
> -extern void *dtb_early_va;
> -extern uintptr_t dtb_early_pa;
> +extern void *_dtb_early_va;
> +extern uintptr_t _dtb_early_pa;
> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> +
> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> +
> +#else
> +
> +#define dtb_early_va _dtb_early_va
> +#define dtb_early_pa _dtb_early_pa
> +
> +#endif /* CONFIG_XIP_KERNEL */
> +
> void setup_bootmem(void);
> void paging_init(void);
> void misc_mem_init(void);
> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
> index 685fae72b7f5..2413c2997350 100644
> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned long hartid)
> }
> #endif
>
> +static inline unsigned long get_secondary_start_phys(void)
> +{
> +#ifdef CONFIG_XIP_KERNEL
> + return XIP_PHYS_ADDR(secondary_start_sbi);
> +#else
> + return __pa_symbol(secondary_start_sbi);
> +#endif
> +}
> +
> static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
> {
> int rc;
> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> + unsigned long boot_addr = get_secondary_start_phys();
> int hartid = cpuid_to_hartid_map(cpuid);
>
> cpu_update_secondary_bootdata(cpuid, tidle);
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index f5a9bad86e58..bbe74e37914f 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -9,11 +9,23 @@
> #include <linux/linkage.h>
> #include <asm/thread_info.h>
> #include <asm/page.h>
> +#include <asm/pgtable.h>
> #include <asm/csr.h>
> #include <asm/hwcap.h>
> #include <asm/image.h>
> #include "efi-header.S"
>
> +#ifdef CONFIG_XIP_KERNEL
> +.macro XIP_FIXUP_OFFSET reg
> + REG_L t0, _xip_fixup
> + add \reg, \reg, t0
> +.endm
> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> +#else
> +.macro XIP_FIXUP_OFFSET reg
> +.endm
> +#endif /* CONFIG_XIP_KERNEL */
> +
> __HEAD
> ENTRY(_start)
> /*
> @@ -69,7 +81,11 @@ pe_head_start:
> #ifdef CONFIG_MMU
> relocate:
> /* Relocate return address */
> +#ifdef CONFIG_XIP_KERNEL
> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> +#else
> li a1, PAGE_OFFSET
> +#endif
> la a2, _start
> sub a1, a1, a2
> add ra, ra, a1
> @@ -91,6 +107,7 @@ relocate:
> * to ensure the new translations are in use.
> */
> la a0, trampoline_pg_dir
> + XIP_FIXUP_OFFSET a0
> srl a0, a0, PAGE_SHIFT
> or a0, a0, a1
> sfence.vma
> @@ -144,7 +161,9 @@ secondary_start_sbi:
>
> slli a3, a0, LGREG
> la a4, __cpu_up_stack_pointer
> + XIP_FIXUP_OFFSET a4
> la a5, __cpu_up_task_pointer
> + XIP_FIXUP_OFFSET a5
> add a4, a3, a4
> add a5, a3, a5
> REG_L sp, (a4)
> @@ -156,6 +175,7 @@ secondary_start_common:
> #ifdef CONFIG_MMU
> /* Enable virtual memory and relocate to virtual address */
> la a0, swapper_pg_dir
> + XIP_FIXUP_OFFSET a0
> call relocate
> #endif
> call setup_trap_vector
> @@ -236,12 +256,33 @@ pmp_done:
> .Lgood_cores:
> #endif
>
> +#ifndef CONFIG_XIP_KERNEL
> /* Pick one hart to run the main boot sequence */
> la a3, hart_lottery
> li a2, 1
> amoadd.w a3, a2, (a3)
> bnez a3, .Lsecondary_start
>
> +#else
> + /* hart_lottery in flash contains a magic number */
> + la a3, hart_lottery
> + mv a2, a3
> + XIP_FIXUP_OFFSET a2
> + lw t1, (a3)
> + amoswap.w t0, t1, (a2)
> + /* first time here if hart_lottery in RAM is not set */
> + beq t0, t1, .Lsecondary_start
> +
> + la sp, _end + THREAD_SIZE
> + XIP_FIXUP_OFFSET sp
> + mv s0, a0
> + call __copy_data
> +
> + /* Restore a0 copy */
> + mv a0, s0
> +#endif
> +
> +#ifndef CONFIG_XIP_KERNEL
> /* Clear BSS for flat non-ELF images */
> la a3, __bss_start
> la a4, __bss_stop
> @@ -251,15 +292,18 @@ clear_bss:
> add a3, a3, RISCV_SZPTR
> blt a3, a4, clear_bss
> clear_bss_done:
> -
> +#endif
> /* Save hart ID and DTB physical address */
> mv s0, a0
> mv s1, a1
> +
> la a2, boot_cpu_hartid
> + XIP_FIXUP_OFFSET a2
> REG_S a0, (a2)
>
> /* Initialize page tables and relocate to virtual addresses */
> la sp, init_thread_union + THREAD_SIZE
> + XIP_FIXUP_OFFSET sp
> #ifdef CONFIG_BUILTIN_DTB
> la a0, __dtb_start
> #else
> @@ -268,6 +312,7 @@ clear_bss_done:
> call setup_vm
> #ifdef CONFIG_MMU
> la a0, early_pg_dir
> + XIP_FIXUP_OFFSET a0
> call relocate
> #endif /* CONFIG_MMU */
>
> @@ -292,7 +337,9 @@ clear_bss_done:
>
> slli a3, a0, LGREG
> la a1, __cpu_up_stack_pointer
> + XIP_FIXUP_OFFSET a1
> la a2, __cpu_up_task_pointer
> + XIP_FIXUP_OFFSET a2
> add a1, a3, a1
> add a2, a3, a2
>
> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> index b48dda3d04f6..aabbc3ac3e48 100644
> --- a/arch/riscv/kernel/head.h
> +++ b/arch/riscv/kernel/head.h
> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>
> asmlinkage void do_page_fault(struct pt_regs *regs);
> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> +#ifdef CONFIG_XIP_KERNEL
> +asmlinkage void __init __copy_data(void);
> +#endif
>
> extern void *__cpu_up_stack_pointer[];
> extern void *__cpu_up_task_pointer[];
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index e85bacff1b50..a0384c72c272 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
> * This is used before the kernel initializes the BSS so it can't be in the
> * BSS.
> */
> -atomic_t hart_lottery __section(".sdata");
> +atomic_t hart_lottery __section(".sdata")
> +#ifdef CONFIG_XIP_KERNEL
> += ATOMIC_INIT(0xC001BEEF)
> +#endif
> +;
> unsigned long boot_cpu_hartid;
> static DEFINE_PER_CPU(struct cpu, cpu_devices);
>
> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> unflatten_and_copy_device_tree();
> #else
> - if (early_init_dt_verify(__va(dtb_early_pa)))
> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> unflatten_device_tree();
> else
> pr_err("No DTB found in kernel mappings\n");
> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
> new file mode 100644
> index 000000000000..9f0f08c34cd3
> --- /dev/null
> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> @@ -0,0 +1,132 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2012 Regents of the University of California
> + * Copyright (C) 2017 SiFive
> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> + */
> +
> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> +/* No __ro_after_init data in the .rodata section - which will always be ro */
> +#define RO_AFTER_INIT_DATA
> +
> +#include <asm/vmlinux.lds.h>
> +#include <asm/page.h>
> +#include <asm/pgtable.h>
> +#include <asm/cache.h>
> +#include <asm/thread_info.h>
> +
> +OUTPUT_ARCH(riscv)
> +ENTRY(_start)
> +
> +jiffies = jiffies_64;
> +
> +SECTIONS
> +{
> + /* Beginning of code and text segment */
> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> + _xiprom = .;
> + _start = .;
> + HEAD_TEXT_SECTION
> + INIT_TEXT_SECTION(PAGE_SIZE)
> + /* we have to discard exit text and such at runtime, not link time */
> + .exit.text :
> + {
> + EXIT_TEXT
> + }
> +
> + .text : {
> + _text = .;
> + _stext = .;
> + TEXT_TEXT
> + SCHED_TEXT
> + CPUIDLE_TEXT
> + LOCK_TEXT
> + KPROBES_TEXT
> + ENTRY_TEXT
> + IRQENTRY_TEXT
> + SOFTIRQENTRY_TEXT
> + *(.fixup)
> + _etext = .;
> + }
> + RO_DATA(L1_CACHE_BYTES)
> + .srodata : {
> + *(.srodata*)
> + }
> + .init.rodata : {
> + INIT_SETUP(16)
> + INIT_CALLS
> + CON_INITCALL
> + INIT_RAM_FS
> + }
> + _exiprom = .; /* End of XIP ROM area */
> +
> +
> +/*
> + * From this point, stuff is considered writable and will be copied to RAM
> + */
> + __data_loc = ALIGN(16); /* location in file */
> + . = PAGE_OFFSET; /* location in memory */
> +
> + _sdata = .; /* Start of data section */
> + _data = .;
> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> + _edata = .;
> + __start_ro_after_init = .;
> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
> + *(.data..ro_after_init)
> + }
> + __end_ro_after_init = .;
> +
> + . = ALIGN(PAGE_SIZE);
> + __init_begin = .;
> + .init.data : {
> + INIT_DATA
> + }
> + .exit.data : {
> + EXIT_DATA
> + }
> + . = ALIGN(8);
> + __soc_early_init_table : {
> + __soc_early_init_table_start = .;
> + KEEP(*(__soc_early_init_table))
> + __soc_early_init_table_end = .;
> + }
> + __soc_builtin_dtb_table : {
> + __soc_builtin_dtb_table_start = .;
> + KEEP(*(__soc_builtin_dtb_table))
> + __soc_builtin_dtb_table_end = .;
> + }
> + PERCPU_SECTION(L1_CACHE_BYTES)
> +
> + . = ALIGN(PAGE_SIZE);
> + __init_end = .;
> +
> + .sdata : {
> + __global_pointer$ = . + 0x800;
> + *(.sdata*)
> + *(.sbss*)
> + }
> +
> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> + EXCEPTION_TABLE(0x10)
> +
> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> + *(.rel.dyn*)
> + }
> +
> + /*
> + * End of copied data. We need a dummy section to get its LMA.
> + * Also located before final ALIGN() as trailing padding is not stored
> + * in the resulting binary file and useless to copy.
> + */
> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> + _edata_loc = LOADADDR(.data.endmark);
> +
> + . = ALIGN(PAGE_SIZE);
> + _end = .;
> +
> + STABS_DEBUG
> + DWARF_DEBUG
> +
> + DISCARDS
> +}
> diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> index de03cb22d0e9..6745ec325930 100644
> --- a/arch/riscv/kernel/vmlinux.lds.S
> +++ b/arch/riscv/kernel/vmlinux.lds.S
> @@ -4,7 +4,12 @@
> * Copyright (C) 2017 SiFive
> */
>
> +#ifdef CONFIG_XIP_KERNEL
> +#include "vmlinux-xip.lds.S"
> +#else
> +
> #define LOAD_OFFSET PAGE_OFFSET
> +
> #include <asm/vmlinux.lds.h>
> #include <asm/page.h>
> #include <asm/cache.h>
> @@ -132,3 +137,4 @@ SECTIONS
>
> DISCARDS
> }
> +#endif /* CONFIG_XIP_KERNEL */
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 7f5036fbee8c..efe649d41f95 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>
> extern char _start[];
> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> -void *dtb_early_va __initdata;
> -uintptr_t dtb_early_pa __initdata;
> +void *_dtb_early_va __initdata;
> +uintptr_t _dtb_early_pa __initdata;
>
> struct pt_alloc_ops {
> pte_t *(*get_pte_virt)(phys_addr_t pa);
> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> (unsigned long)VMALLOC_END);
> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> (unsigned long)high_memory);
> +#ifdef CONFIG_XIP_KERNEL
> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> +#endif /* CONFIG_XIP_KERNEL */
> }
> #else
> static void print_vm_layout(void) { }
> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> phys_addr_t dram_end = memblock_end_of_DRAM();
> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>
> +#ifdef CONFIG_XIP_KERNEL
> + vmlinux_start = __pa_symbol(&_sdata);
> +#endif
> +
> /* The maximal physical memory size is -PAGE_OFFSET. */
> memblock_enforce_memory_limit(-PAGE_OFFSET);
>
> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> memblock_allow_resize();
> }
>
> +#ifdef CONFIG_XIP_KERNEL
> +
> +extern char _xiprom[], _exiprom[];
> +extern char _sdata[], _edata[];
> +
> +#endif /* CONFIG_XIP_KERNEL */
> +
> #ifdef CONFIG_MMU
> -static struct pt_alloc_ops pt_ops;
> +static struct pt_alloc_ops _pt_ops;
> +
> +#ifdef CONFIG_XIP_KERNEL
> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> +#else
> +#define pt_ops _pt_ops
> +#endif
>
> unsigned long va_pa_offset;
> EXPORT_SYMBOL(va_pa_offset);
> +#ifdef CONFIG_XIP_KERNEL
> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
> +#endif
> unsigned long pfn_base;
> EXPORT_SYMBOL(pfn_base);
>
> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
>
> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
>
> +#ifdef CONFIG_XIP_KERNEL
> +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> +#endif /* CONFIG_XIP_KERNEL */
> +
> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
> {
> unsigned long addr = __fix_to_virt(idx);
> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>
> +#ifdef CONFIG_XIP_KERNEL
> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> +
> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> +#endif /* CONFIG_XIP_KERNEL */
> +
> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> {
> /* Before MMU is enabled */
> @@ -354,6 +393,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> return PMD_SIZE;
> }
>
> +#ifdef CONFIG_XIP_KERNEL
> +/* called from head.S with MMU off */
> +asmlinkage void __init __copy_data(void)
> +{
> + void *from = (void *)(&_sdata);
> + void *end = (void *)(&_end);
> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> + size_t sz = (size_t)(end - from);
> +
> + memcpy(to, from, sz);
> +}
> +#endif
> +
> /*
> * setup_vm() is called from head.S with MMU-off.
> *
> @@ -374,7 +426,8 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
>
> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> {
> - uintptr_t va, pa, end_va;
> + uintptr_t va, end_va;
> + uintptr_t __maybe_unused pa;
> uintptr_t load_pa = (uintptr_t)(&_start);
> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> uintptr_t map_size;
> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> #endif
>
> +#ifdef CONFIG_XIP_KERNEL
> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> +
> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> +#endif
> va_pa_offset = PAGE_OFFSET - load_pa;
> pfn_base = PFN_DOWN(load_pa);
>
> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> #endif
>
> +#ifdef CONFIG_XIP_KERNEL
> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> + for (va = XIP_VIRT_ADDR_START;
> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> + va += PMD_SIZE) {
> + create_pmd_mapping(xip_pmd, va,
> + xiprom + (va - XIP_VIRT_ADDR_START),
> + PMD_SIZE, PAGE_KERNEL_EXEC);
> + }
> +
> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> +#endif
> +
> /*
> * Setup early PGD covering entire kernel which will allows
> * us to reach paging_init(). We map all memory banks later
> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
> #else /* CONFIG_BUILTIN_DTB */
> - dtb_early_va = __va(dtb_pa);
> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> #endif /* CONFIG_BUILTIN_DTB */
> #else
> #ifndef CONFIG_BUILTIN_DTB
> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
> #else /* CONFIG_BUILTIN_DTB */
> - dtb_early_va = __va(dtb_pa);
> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> #endif /* CONFIG_BUILTIN_DTB */
> #endif
> dtb_early_pa = dtb_pa;
> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> uintptr_t va, map_size;
> phys_addr_t pa, start, end;
> u64 i;
> +#ifdef CONFIG_XIP_KERNEL
> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> +#endif
>
> /**
> * MMU is enabled at this point. But page table setup is not complete yet.
> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> map_size, PAGE_KERNEL_EXEC);
> }
> }
> +#ifdef CONFIG_XIP_KERNEL
> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> + for (va = XIP_VIRT_ADDR_START;
> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> + va += map_size)
> + create_pgd_mapping(swapper_pg_dir, va,
> + CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
> + map_size, PAGE_KERNEL_EXEC);
> +
> +#endif
>
> /* Clear fixmap PTE and PMD mappings */
> clear_fixmap(FIX_PTE);
Hi Kefeng,
On Wed, Mar 31, 2021 at 10:37 AM Kefeng Wang <[email protected]> wrote:
>
> Hi，some error when enable XIP_KERNEL config，ARCH_HAS_STRICT_KERNEL_RWX
> should disable when enable XIP_KERNEL，
>
> but there
>
> riscv64-linux-ld: section .data LMA [0000000000800000,00000000008cd37f]
> overlaps section .rodata LMA [0000000000706bc0,000000000085dd67]
> riscv64-linux-ld: section .pci_fixup LMA
> [000000000085dd68,0000000000861397] overlaps section .data LMA
> [0000000000800000,00000000008cd37f]
> riscv64-linux-ld: arch/riscv/mm/init.o: in function `.L138':
> init.c:(.text+0x232): undefined reference to `__init_text_begin'
> riscv64-linux-ld: arch/riscv/mm/init.o: in function
> `protect_kernel_text_data':
> init.c:(.text+0x23a): undefined reference to `__init_data_begin'
> riscv64-linux-ld: init.c:(.text+0x28c): undefined reference to
> `__init_text_begin'
> riscv64-linux-ld: init.c:(.text+0x2a0): undefined reference to
> `__init_data_begin'
all the RO sections should fit in 8 MB for xipImage. Could you please
remove the unnecessary parts from your kernel and retry?
Thanks,
Vitaly
> On 2021/3/22 8:12, Vitaly Wool wrote:
> > Introduce XIP (eXecute In Place) support for RISC-V platforms.
> > It allows code to be executed directly from non-volatile storage
> > directly addressable by the CPU, such as QSPI NOR flash which can
> > be found on many RISC-V platforms. This makes way for significant
> > optimization of RAM footprint. The XIP kernel is not compressed
> > since it has to run directly from flash, so it will occupy more
> > space on the non-volatile storage. The physical flash address used
> > to link the kernel object files and for storing it has to be known
> > at compile time and is represented by a Kconfig option.
> >
> > XIP on RISC-V will for the time being only work on MMU-enabled
> > kernels.
> >
> > Signed-off-by: Vitaly Wool <[email protected]>
> >
> > ---
> >
> > Changes in v2:
> > - dedicated macro for XIP address fixup when MMU is not enabled yet
> > o both for 32-bit and 64-bit RISC-V
> > - SP is explicitly set to a safe place in RAM before __copy_data call
> > - removed redundant alignment requirements in vmlinux-xip.lds.S
> > - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> > Changes in v3:
> > - rebased against latest for-next
> > - XIP address fixup macro now takes an argument
> > - SMP related fixes
> > Changes in v4:
> > - rebased against the current for-next
> > - less #ifdef's in C/ASM code
> > - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> > - C-specific definitions moved into #ifndef __ASSEMBLY__
> > - Fixed multi-core boot
> > Changes in v5:
> > - fixed build error for non-XIP kernels
> > Changes in v6:
> > - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> > - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> > PHYS_RAM_BASE in non-XIP configurations if needed
> > - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
> > effects
> > - fixed crash for non-XIP kernels that don't use built-in DTB
> >
> > arch/riscv/Kconfig | 49 ++++++++++-
> > arch/riscv/Makefile | 8 +-
> > arch/riscv/boot/Makefile | 13 +++
> > arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> > arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> > arch/riscv/kernel/head.S | 49 ++++++++++-
> > arch/riscv/kernel/head.h | 3 +
> > arch/riscv/kernel/setup.c | 8 +-
> > arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++++
> > arch/riscv/kernel/vmlinux.lds.S | 6 ++
> > arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> > 11 files changed, 426 insertions(+), 18 deletions(-)
> > create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index 8ea60a0a19ae..bd6f82240c34 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -441,7 +441,7 @@ config EFI_STUB
> >
> > config EFI
> > bool "UEFI runtime support"
> > - depends on OF
> > + depends on OF && !XIP_KERNEL
> > select LIBFDT
> > select UCS2_STRING
> > select EFI_PARAMS_FROM_FDT
> > @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> > def_bool y
> > depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
> >
> > +config PHYS_RAM_BASE_FIXED
> > + bool "Explicitly specified physical RAM address"
> > + default n
> > +
> > +config PHYS_RAM_BASE
> > + hex "Platform Physical RAM address"
> > + depends on PHYS_RAM_BASE_FIXED
> > + default "0x80000000"
> > + help
> > + This is the physical address of RAM in the system. It has to be
> > + explicitly specified to run early relocations of read-write data
> > + from flash to RAM.
> > +
> > +config XIP_KERNEL
> > + bool "Kernel Execute-In-Place from ROM"
> > + depends on MMU
> > + select PHYS_RAM_BASE_FIXED
> > + help
> > + Execute-In-Place allows the kernel to run from non-volatile storage
> > + directly addressable by the CPU, such as NOR flash. This saves RAM
> > + space since the text section of the kernel is not loaded from flash
> > + to RAM. Read-write sections, such as the data section and stack,
> > + are still copied to RAM. The XIP kernel is not compressed since
> > + it has to run directly from flash, so it will take more space to
> > + store it. The flash address used to link the kernel object files,
> > + and for storing it, is configuration dependent. Therefore, if you
> > + say Y here, you must know the proper physical address where to
> > + store the kernel image depending on your own flash memory usage.
> > +
> > + Also note that the make target becomes "make xipImage" rather than
> > + "make zImage" or "make Image". The final kernel binary to put in
> > + ROM memory will be arch/riscv/boot/xipImage.
> > +
> > + If unsure, say N.
> > +
> > +config XIP_PHYS_ADDR
> > + hex "XIP Kernel Physical Location"
> > + depends on XIP_KERNEL
> > + default "0x21000000"
> > + help
> > + This is the physical address in your flash memory the kernel will
> > + be linked for and stored to. This address is dependent on your
> > + own flash usage.
> > +
> > endmenu
> >
> > config BUILTIN_DTB
> > - def_bool n
> > + bool
> > depends on OF
> > + default y if XIP_KERNEL
> >
> > menu "Power management options"
> >
> > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > index 1368d943f1f3..8fcbec03974d 100644
> > --- a/arch/riscv/Makefile
> > +++ b/arch/riscv/Makefile
> > @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >
> > # Default target when executing plain make
> > boot := arch/riscv/boot
> > +ifeq ($(CONFIG_XIP_KERNEL),y)
> > +KBUILD_IMAGE := $(boot)/xipImage
> > +else
> > KBUILD_IMAGE := $(boot)/Image.gz
> > +endif
> >
> > head-y := arch/riscv/kernel/head.o
> >
> > @@ -95,12 +99,14 @@ PHONY += vdso_install
> > vdso_install:
> > $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> >
> > +ifneq ($(CONFIG_XIP_KERNEL),y)
> > ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> > KBUILD_IMAGE := $(boot)/loader.bin
> > else
> > KBUILD_IMAGE := $(boot)/Image.gz
> > endif
> > -BOOT_TARGETS := Image Image.gz loader loader.bin
> > +endif
> > +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> >
> > all: $(notdir $(KBUILD_IMAGE))
> >
> > diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> > index 03404c84f971..6bf299f70c27 100644
> > --- a/arch/riscv/boot/Makefile
> > +++ b/arch/riscv/boot/Makefile
> > @@ -17,8 +17,21 @@
> > KCOV_INSTRUMENT := n
> >
> > OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> > +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> >
> > targets := Image Image.* loader loader.o loader.lds loader.bin
> > +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
> > +
> > +ifeq ($(CONFIG_XIP_KERNEL),y)
> > +
> > +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> > +cmd_mkxip = $(cmd_objcopy)
> > +
> > +$(obj)/xipImage: vmlinux FORCE
> > + $(call if_changed,mkxip)
> > + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
> > +
> > +endif
> >
> > $(obj)/Image: vmlinux FORCE
> > $(call if_changed,objcopy)
> > diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> > index ebf817c1bdf4..21a9b2f8d1c7 100644
> > --- a/arch/riscv/include/asm/pgtable.h
> > +++ b/arch/riscv/include/asm/pgtable.h
> > @@ -11,6 +11,33 @@
> >
> > #include <asm/pgtable-bits.h>
> >
> > +#ifdef CONFIG_MMU
> > +
> > +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > +
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> > +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> > +
> > +#define XIP_OFFSET SZ_8M
> > +#define XIP_MASK (SZ_8M - 1)
> > +#define XIP_VIRT_ADDR(physaddr) \
> > + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> > +
> > +#else
> > +
> > +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > +#define VMALLOC_END (PAGE_OFFSET - 1)
> > +
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > +#else
> > +
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> > +#endif /* CONFIG_XIP_KERNEL */
> > +#endif /* CONFIG_MMU */
> > +
> > #ifndef __ASSEMBLY__
> >
> > /* Page Upper Directory not used in RISC-V */
> > @@ -21,9 +48,25 @@
> >
> > #ifdef CONFIG_MMU
> >
> > -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > -#define VMALLOC_END (PAGE_OFFSET - 1)
> > -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > +#ifdef CONFIG_XIP_KERNEL
> > +/*
> > + * Since we use sections to map it, this macro replaces the physical address
> > + * with its virtual address while keeping offset from the base section.
> > + */
> > +#define XIP_PHYS_ADDR(va) \
> > + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
> > +
> > +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > +
> > +#define XIP_FIXUP(addr) ({ \
> > + uintptr_t __a = (uintptr_t)(addr); \
> > + (__a >= CONFIG_XIP_PHYS_ADDR && \
> > + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> > + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - XIP_OFFSET : __a; \
> > +})
> > +#else
> > +#define XIP_FIXUP(addr) (addr)
> > +#endif /* CONFIG_XIP_KERNEL */
> >
> > #define BPF_JIT_REGION_SIZE (SZ_128M)
> > #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > @@ -484,8 +527,20 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
> >
> > #define kern_addr_valid(addr) (1) /* FIXME */
> >
> > -extern void *dtb_early_va;
> > -extern uintptr_t dtb_early_pa;
> > +extern void *_dtb_early_va;
> > +extern uintptr_t _dtb_early_pa;
> > +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> > +
> > +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> > +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> > +
> > +#else
> > +
> > +#define dtb_early_va _dtb_early_va
> > +#define dtb_early_pa _dtb_early_pa
> > +
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > void setup_bootmem(void);
> > void paging_init(void);
> > void misc_mem_init(void);
> > diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
> > index 685fae72b7f5..2413c2997350 100644
> > --- a/arch/riscv/kernel/cpu_ops_sbi.c
> > +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> > @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned long hartid)
> > }
> > #endif
> >
> > +static inline unsigned long get_secondary_start_phys(void)
> > +{
> > +#ifdef CONFIG_XIP_KERNEL
> > + return XIP_PHYS_ADDR(secondary_start_sbi);
> > +#else
> > + return __pa_symbol(secondary_start_sbi);
> > +#endif
> > +}
> > +
> > static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
> > {
> > int rc;
> > - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> > + unsigned long boot_addr = get_secondary_start_phys();
> > int hartid = cpuid_to_hartid_map(cpuid);
> >
> > cpu_update_secondary_bootdata(cpuid, tidle);
> > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > index f5a9bad86e58..bbe74e37914f 100644
> > --- a/arch/riscv/kernel/head.S
> > +++ b/arch/riscv/kernel/head.S
> > @@ -9,11 +9,23 @@
> > #include <linux/linkage.h>
> > #include <asm/thread_info.h>
> > #include <asm/page.h>
> > +#include <asm/pgtable.h>
> > #include <asm/csr.h>
> > #include <asm/hwcap.h>
> > #include <asm/image.h>
> > #include "efi-header.S"
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +.macro XIP_FIXUP_OFFSET reg
> > + REG_L t0, _xip_fixup
> > + add \reg, \reg, t0
> > +.endm
> > +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> > +#else
> > +.macro XIP_FIXUP_OFFSET reg
> > +.endm
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > __HEAD
> > ENTRY(_start)
> > /*
> > @@ -69,7 +81,11 @@ pe_head_start:
> > #ifdef CONFIG_MMU
> > relocate:
> > /* Relocate return address */
> > +#ifdef CONFIG_XIP_KERNEL
> > + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > +#else
> > li a1, PAGE_OFFSET
> > +#endif
> > la a2, _start
> > sub a1, a1, a2
> > add ra, ra, a1
> > @@ -91,6 +107,7 @@ relocate:
> > * to ensure the new translations are in use.
> > */
> > la a0, trampoline_pg_dir
> > + XIP_FIXUP_OFFSET a0
> > srl a0, a0, PAGE_SHIFT
> > or a0, a0, a1
> > sfence.vma
> > @@ -144,7 +161,9 @@ secondary_start_sbi:
> >
> > slli a3, a0, LGREG
> > la a4, __cpu_up_stack_pointer
> > + XIP_FIXUP_OFFSET a4
> > la a5, __cpu_up_task_pointer
> > + XIP_FIXUP_OFFSET a5
> > add a4, a3, a4
> > add a5, a3, a5
> > REG_L sp, (a4)
> > @@ -156,6 +175,7 @@ secondary_start_common:
> > #ifdef CONFIG_MMU
> > /* Enable virtual memory and relocate to virtual address */
> > la a0, swapper_pg_dir
> > + XIP_FIXUP_OFFSET a0
> > call relocate
> > #endif
> > call setup_trap_vector
> > @@ -236,12 +256,33 @@ pmp_done:
> > .Lgood_cores:
> > #endif
> >
> > +#ifndef CONFIG_XIP_KERNEL
> > /* Pick one hart to run the main boot sequence */
> > la a3, hart_lottery
> > li a2, 1
> > amoadd.w a3, a2, (a3)
> > bnez a3, .Lsecondary_start
> >
> > +#else
> > + /* hart_lottery in flash contains a magic number */
> > + la a3, hart_lottery
> > + mv a2, a3
> > + XIP_FIXUP_OFFSET a2
> > + lw t1, (a3)
> > + amoswap.w t0, t1, (a2)
> > + /* first time here if hart_lottery in RAM is not set */
> > + beq t0, t1, .Lsecondary_start
> > +
> > + la sp, _end + THREAD_SIZE
> > + XIP_FIXUP_OFFSET sp
> > + mv s0, a0
> > + call __copy_data
> > +
> > + /* Restore a0 copy */
> > + mv a0, s0
> > +#endif
> > +
> > +#ifndef CONFIG_XIP_KERNEL
> > /* Clear BSS for flat non-ELF images */
> > la a3, __bss_start
> > la a4, __bss_stop
> > @@ -251,15 +292,18 @@ clear_bss:
> > add a3, a3, RISCV_SZPTR
> > blt a3, a4, clear_bss
> > clear_bss_done:
> > -
> > +#endif
> > /* Save hart ID and DTB physical address */
> > mv s0, a0
> > mv s1, a1
> > +
> > la a2, boot_cpu_hartid
> > + XIP_FIXUP_OFFSET a2
> > REG_S a0, (a2)
> >
> > /* Initialize page tables and relocate to virtual addresses */
> > la sp, init_thread_union + THREAD_SIZE
> > + XIP_FIXUP_OFFSET sp
> > #ifdef CONFIG_BUILTIN_DTB
> > la a0, __dtb_start
> > #else
> > @@ -268,6 +312,7 @@ clear_bss_done:
> > call setup_vm
> > #ifdef CONFIG_MMU
> > la a0, early_pg_dir
> > + XIP_FIXUP_OFFSET a0
> > call relocate
> > #endif /* CONFIG_MMU */
> >
> > @@ -292,7 +337,9 @@ clear_bss_done:
> >
> > slli a3, a0, LGREG
> > la a1, __cpu_up_stack_pointer
> > + XIP_FIXUP_OFFSET a1
> > la a2, __cpu_up_task_pointer
> > + XIP_FIXUP_OFFSET a2
> > add a1, a3, a1
> > add a2, a3, a2
> >
> > diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> > index b48dda3d04f6..aabbc3ac3e48 100644
> > --- a/arch/riscv/kernel/head.h
> > +++ b/arch/riscv/kernel/head.h
> > @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> >
> > asmlinkage void do_page_fault(struct pt_regs *regs);
> > asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> > +#ifdef CONFIG_XIP_KERNEL
> > +asmlinkage void __init __copy_data(void);
> > +#endif
> >
> > extern void *__cpu_up_stack_pointer[];
> > extern void *__cpu_up_task_pointer[];
> > diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> > index e85bacff1b50..a0384c72c272 100644
> > --- a/arch/riscv/kernel/setup.c
> > +++ b/arch/riscv/kernel/setup.c
> > @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
> > * This is used before the kernel initializes the BSS so it can't be in the
> > * BSS.
> > */
> > -atomic_t hart_lottery __section(".sdata");
> > +atomic_t hart_lottery __section(".sdata")
> > +#ifdef CONFIG_XIP_KERNEL
> > += ATOMIC_INIT(0xC001BEEF)
> > +#endif
> > +;
> > unsigned long boot_cpu_hartid;
> > static DEFINE_PER_CPU(struct cpu, cpu_devices);
> >
> > @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> > #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> > unflatten_and_copy_device_tree();
> > #else
> > - if (early_init_dt_verify(__va(dtb_early_pa)))
> > + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> > unflatten_device_tree();
> > else
> > pr_err("No DTB found in kernel mappings\n");
> > diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
> > new file mode 100644
> > index 000000000000..9f0f08c34cd3
> > --- /dev/null
> > +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> > @@ -0,0 +1,132 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2012 Regents of the University of California
> > + * Copyright (C) 2017 SiFive
> > + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> > + */
> > +
> > +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > +/* No __ro_after_init data in the .rodata section - which will always be ro */
> > +#define RO_AFTER_INIT_DATA
> > +
> > +#include <asm/vmlinux.lds.h>
> > +#include <asm/page.h>
> > +#include <asm/pgtable.h>
> > +#include <asm/cache.h>
> > +#include <asm/thread_info.h>
> > +
> > +OUTPUT_ARCH(riscv)
> > +ENTRY(_start)
> > +
> > +jiffies = jiffies_64;
> > +
> > +SECTIONS
> > +{
> > + /* Beginning of code and text segment */
> > + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> > + _xiprom = .;
> > + _start = .;
> > + HEAD_TEXT_SECTION
> > + INIT_TEXT_SECTION(PAGE_SIZE)
> > + /* we have to discard exit text and such at runtime, not link time */
> > + .exit.text :
> > + {
> > + EXIT_TEXT
> > + }
> > +
> > + .text : {
> > + _text = .;
> > + _stext = .;
> > + TEXT_TEXT
> > + SCHED_TEXT
> > + CPUIDLE_TEXT
> > + LOCK_TEXT
> > + KPROBES_TEXT
> > + ENTRY_TEXT
> > + IRQENTRY_TEXT
> > + SOFTIRQENTRY_TEXT
> > + *(.fixup)
> > + _etext = .;
> > + }
> > + RO_DATA(L1_CACHE_BYTES)
> > + .srodata : {
> > + *(.srodata*)
> > + }
> > + .init.rodata : {
> > + INIT_SETUP(16)
> > + INIT_CALLS
> > + CON_INITCALL
> > + INIT_RAM_FS
> > + }
> > + _exiprom = .; /* End of XIP ROM area */
> > +
> > +
> > +/*
> > + * From this point, stuff is considered writable and will be copied to RAM
> > + */
> > + __data_loc = ALIGN(16); /* location in file */
> > + . = PAGE_OFFSET; /* location in memory */
> > +
> > + _sdata = .; /* Start of data section */
> > + _data = .;
> > + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> > + _edata = .;
> > + __start_ro_after_init = .;
> > + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
> > + *(.data..ro_after_init)
> > + }
> > + __end_ro_after_init = .;
> > +
> > + . = ALIGN(PAGE_SIZE);
> > + __init_begin = .;
> > + .init.data : {
> > + INIT_DATA
> > + }
> > + .exit.data : {
> > + EXIT_DATA
> > + }
> > + . = ALIGN(8);
> > + __soc_early_init_table : {
> > + __soc_early_init_table_start = .;
> > + KEEP(*(__soc_early_init_table))
> > + __soc_early_init_table_end = .;
> > + }
> > + __soc_builtin_dtb_table : {
> > + __soc_builtin_dtb_table_start = .;
> > + KEEP(*(__soc_builtin_dtb_table))
> > + __soc_builtin_dtb_table_end = .;
> > + }
> > + PERCPU_SECTION(L1_CACHE_BYTES)
> > +
> > + . = ALIGN(PAGE_SIZE);
> > + __init_end = .;
> > +
> > + .sdata : {
> > + __global_pointer$ = . + 0x800;
> > + *(.sdata*)
> > + *(.sbss*)
> > + }
> > +
> > + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> > + EXCEPTION_TABLE(0x10)
> > +
> > + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> > + *(.rel.dyn*)
> > + }
> > +
> > + /*
> > + * End of copied data. We need a dummy section to get its LMA.
> > + * Also located before final ALIGN() as trailing padding is not stored
> > + * in the resulting binary file and useless to copy.
> > + */
> > + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> > + _edata_loc = LOADADDR(.data.endmark);
> > +
> > + . = ALIGN(PAGE_SIZE);
> > + _end = .;
> > +
> > + STABS_DEBUG
> > + DWARF_DEBUG
> > +
> > + DISCARDS
> > +}
> > diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> > index de03cb22d0e9..6745ec325930 100644
> > --- a/arch/riscv/kernel/vmlinux.lds.S
> > +++ b/arch/riscv/kernel/vmlinux.lds.S
> > @@ -4,7 +4,12 @@
> > * Copyright (C) 2017 SiFive
> > */
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +#include "vmlinux-xip.lds.S"
> > +#else
> > +
> > #define LOAD_OFFSET PAGE_OFFSET
> > +
> > #include <asm/vmlinux.lds.h>
> > #include <asm/page.h>
> > #include <asm/cache.h>
> > @@ -132,3 +137,4 @@ SECTIONS
> >
> > DISCARDS
> > }
> > +#endif /* CONFIG_XIP_KERNEL */
> > diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> > index 7f5036fbee8c..efe649d41f95 100644
> > --- a/arch/riscv/mm/init.c
> > +++ b/arch/riscv/mm/init.c
> > @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >
> > extern char _start[];
> > #define DTB_EARLY_BASE_VA PGDIR_SIZE
> > -void *dtb_early_va __initdata;
> > -uintptr_t dtb_early_pa __initdata;
> > +void *_dtb_early_va __initdata;
> > +uintptr_t _dtb_early_pa __initdata;
> >
> > struct pt_alloc_ops {
> > pte_t *(*get_pte_virt)(phys_addr_t pa);
> > @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> > (unsigned long)VMALLOC_END);
> > print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> > (unsigned long)high_memory);
> > +#ifdef CONFIG_XIP_KERNEL
> > + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> > + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> > +#endif /* CONFIG_XIP_KERNEL */
> > }
> > #else
> > static void print_vm_layout(void) { }
> > @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> > phys_addr_t dram_end = memblock_end_of_DRAM();
> > phys_addr_t max_mapped_addr = __pa(~(ulong)0);
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + vmlinux_start = __pa_symbol(&_sdata);
> > +#endif
> > +
> > /* The maximal physical memory size is -PAGE_OFFSET. */
> > memblock_enforce_memory_limit(-PAGE_OFFSET);
> >
> > @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> > memblock_allow_resize();
> > }
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +
> > +extern char _xiprom[], _exiprom[];
> > +extern char _sdata[], _edata[];
> > +
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > #ifdef CONFIG_MMU
> > -static struct pt_alloc_ops pt_ops;
> > +static struct pt_alloc_ops _pt_ops;
> > +
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> > +#else
> > +#define pt_ops _pt_ops
> > +#endif
> >
> > unsigned long va_pa_offset;
> > EXPORT_SYMBOL(va_pa_offset);
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
> > +#endif
> > unsigned long pfn_base;
> > EXPORT_SYMBOL(pfn_base);
> >
> > @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> >
> > pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
> > +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> > +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
> > {
> > unsigned long addr = __fix_to_virt(idx);
> > @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> > pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > +
> > +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> > +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> > +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> > +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> > {
> > /* Before MMU is enabled */
> > @@ -354,6 +393,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> > return PMD_SIZE;
> > }
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +/* called from head.S with MMU off */
> > +asmlinkage void __init __copy_data(void)
> > +{
> > + void *from = (void *)(&_sdata);
> > + void *end = (void *)(&_end);
> > + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> > + size_t sz = (size_t)(end - from);
> > +
> > + memcpy(to, from, sz);
> > +}
> > +#endif
> > +
> > /*
> > * setup_vm() is called from head.S with MMU-off.
> > *
> > @@ -374,7 +426,8 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> >
> > asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > {
> > - uintptr_t va, pa, end_va;
> > + uintptr_t va, end_va;
> > + uintptr_t __maybe_unused pa;
> > uintptr_t load_pa = (uintptr_t)(&_start);
> > uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> > uintptr_t map_size;
> > @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > pmd_t fix_bmap_spmd, fix_bmap_epmd;
> > #endif
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> > + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> > +
> > + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> > + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> > +#endif
> > va_pa_offset = PAGE_OFFSET - load_pa;
> > pfn_base = PFN_DOWN(load_pa);
> >
> > @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> > #endif
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> > + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> > + for (va = XIP_VIRT_ADDR_START;
> > + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > + va += PMD_SIZE) {
> > + create_pmd_mapping(xip_pmd, va,
> > + xiprom + (va - XIP_VIRT_ADDR_START),
> > + PMD_SIZE, PAGE_KERNEL_EXEC);
> > + }
> > +
> > + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> > + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> > +#endif
> > +
> > /*
> > * Setup early PGD covering entire kernel which will allows
> > * us to reach paging_init(). We map all memory banks later
> > @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> > dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
> > #else /* CONFIG_BUILTIN_DTB */
> > - dtb_early_va = __va(dtb_pa);
> > + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> > #endif /* CONFIG_BUILTIN_DTB */
> > #else
> > #ifndef CONFIG_BUILTIN_DTB
> > @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
> > dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
> > #else /* CONFIG_BUILTIN_DTB */
> > - dtb_early_va = __va(dtb_pa);
> > + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> > #endif /* CONFIG_BUILTIN_DTB */
> > #endif
> > dtb_early_pa = dtb_pa;
> > @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> > uintptr_t va, map_size;
> > phys_addr_t pa, start, end;
> > u64 i;
> > +#ifdef CONFIG_XIP_KERNEL
> > + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> > +#endif
> >
> > /**
> > * MMU is enabled at this point. But page table setup is not complete yet.
> > @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> > map_size, PAGE_KERNEL_EXEC);
> > }
> > }
> > +#ifdef CONFIG_XIP_KERNEL
> > + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> > + for (va = XIP_VIRT_ADDR_START;
> > + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > + va += map_size)
> > + create_pgd_mapping(swapper_pg_dir, va,
> > + CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
> > + map_size, PAGE_KERNEL_EXEC);
> > +
> > +#endif
> >
> > /* Clear fixmap PTE and PMD mappings */
> > clear_fixmap(FIX_PTE);
Hi,
Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
>>>
>>>
>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
>>>> <[email protected]> wrote:
>>>>>
>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
>>>>> wrote:
>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
>>>>>> It allows code to be executed directly from non-volatile storage
>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
>>>>>> be found on many RISC-V platforms. This makes way for significant
>>>>>> optimization of RAM footprint. The XIP kernel is not compressed
>>>>>> since it has to run directly from flash, so it will occupy more
>>>>>> space on the non-volatile storage. The physical flash address used
>>>>>> to link the kernel object files and for storing it has to be known
>>>>>> at compile time and is represented by a Kconfig option.
>>>>>>
>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
>>>>>> kernels.
>>>>>>
>>>>>> Signed-off-by: Vitaly Wool <[email protected]>
>>>>>>
>>>>>> ---
>>>>>>
>>>>>> Changes in v2:
>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled yet
>>>>>> Â Â o both for 32-bit and 64-bit RISC-V
>>>>>> - SP is explicitly set to a safe place in RAM before __copy_data call
>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>>>>>> Changes in v3:
>>>>>> - rebased against latest for-next
>>>>>> - XIP address fixup macro now takes an argument
>>>>>> - SMP related fixes
>>>>>> Changes in v4:
>>>>>> - rebased against the current for-next
>>>>>> - less #ifdef's in C/ASM code
>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
>>>>>> - Fixed multi-core boot
>>>>>> Changes in v5:
>>>>>> - fixed build error for non-XIP kernels
>>>>>> Changes in v6:
>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
>>>>>> Â Â PHYS_RAM_BASE in non-XIP configurations if needed
>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
>>>>>> Â Â effects
>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
>>>>>
>>>>> So v5 landed on for-next, which generally means it's best to avoid
>>>>> re-spinning the patch and instead send along fixups. That said,
>>>>> the v5
>>>>> is causing some testing failures for me.
>>>>>
>>>>> I'm going to drop the v5 for now as I don't have time to test this
>>>>> tonight. I'll try and take a look soon, as it will conflict with
>>>>> Alex's
>>>>> patches.
>>>>
>>>> I can come up with the incremental patch instead pretty much straight
>>>> away if that works better.
>>>>
>>>> ~Vitaly
>>>>
>>>>>>  arch/riscv/Kconfig                 | 49 ++++++++++-
>>>>>>  arch/riscv/Makefile                |  8 +-
>>>>>>  arch/riscv/boot/Makefile           | 13 +++
>>>>>>  arch/riscv/include/asm/pgtable.h   | 65 ++++++++++++--
>>>>>>  arch/riscv/kernel/cpu_ops_sbi.c    | 11 ++-
>>>>>> Â arch/riscv/kernel/head.SÂ Â Â Â Â Â Â Â Â Â Â |Â 49 ++++++++++-
>>>>>>  arch/riscv/kernel/head.h           |  3 +
>>>>>>  arch/riscv/kernel/setup.c          |  8 +-
>>>>>> Â arch/riscv/kernel/vmlinux-xip.lds.S | 132
>>>>>> ++++++++++++++++++++++++++++
>>>>>> Â arch/riscv/kernel/vmlinux.lds.SÂ Â Â Â |Â Â 6 ++
>>>>>>  arch/riscv/mm/init.c               | 100 +++++++++++++++++++--
>>>>>> Â 11 files changed, 426 insertions(+), 18 deletions(-)
>>>>>> Â create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>
>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
>>>>>> --- a/arch/riscv/Kconfig
>>>>>> +++ b/arch/riscv/Kconfig
>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
>>>>>>
>>>>>> Â config EFI
>>>>>> Â Â Â Â Â Â bool "UEFI runtime support"
>>>>>> -Â Â Â Â depends on OF
>>>>>> +Â Â Â Â depends on OF && !XIP_KERNEL
>>>>>> Â Â Â Â Â Â select LIBFDT
>>>>>> Â Â Â Â Â Â select UCS2_STRING
>>>>>> Â Â Â Â Â Â select EFI_PARAMS_FROM_FDT
>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
>>>>>> Â Â Â Â Â Â def_bool y
>>>>>> Â Â Â Â Â Â depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>>>>>>
>>>>>> +config PHYS_RAM_BASE_FIXED
>>>>>> +Â Â Â Â bool "Explicitly specified physical RAM address"
>>>>>> +Â Â Â Â default n
>>>>>> +
>>>>>> +config PHYS_RAM_BASE
>>>>>> +Â Â Â Â hex "Platform Physical RAM address"
>>>>>> +Â Â Â Â depends on PHYS_RAM_BASE_FIXED
>>>>>> +Â Â Â Â default "0x80000000"
>>>>>> +Â Â Â Â help
>>>>>> +Â Â Â Â Â Â This is the physical address of RAM in the system. It has
>>>>>> to be
>>>>>> +Â Â Â Â Â Â explicitly specified to run early relocations of
>>>>>> read-write data
>>>>>> +Â Â Â Â Â Â from flash to RAM.
>>>>>> +
>>>>>> +config XIP_KERNEL
>>>>>> +Â Â Â Â bool "Kernel Execute-In-Place from ROM"
>>>>>> +Â Â Â Â depends on MMU
>>>>>> +Â Â Â Â select PHYS_RAM_BASE_FIXED
>>>>>> +Â Â Â Â help
>>>>>> +Â Â Â Â Â Â Execute-In-Place allows the kernel to run from
>>>>>> non-volatile storage
>>>>>> +Â Â Â Â Â Â directly addressable by the CPU, such as NOR flash. This
>>>>>> saves RAM
>>>>>> +Â Â Â Â Â Â space since the text section of the kernel is not loaded
>>>>>> from flash
>>>>>> +      to RAM. Read-write sections, such as the data section and
>>>>>> stack,
>>>>>> +      are still copied to RAM. The XIP kernel is not compressed
>>>>>> since
>>>>>> +Â Â Â Â Â Â it has to run directly from flash, so it will take more
>>>>>> space to
>>>>>> +      store it. The flash address used to link the kernel
>>>>>> object files,
>>>>>> +Â Â Â Â Â Â and for storing it, is configuration dependent. Therefore,
>>>>>> if you
>>>>>> +Â Â Â Â Â Â say Y here, you must know the proper physical address
>>>>>> where to
>>>>>> +Â Â Â Â Â Â store the kernel image depending on your own flash memory
>>>>>> usage.
>>>>>> +
>>>>>> +Â Â Â Â Â Â Also note that the make target becomes "make xipImage"
>>>>>> rather than
>>>>>> +      "make zImage" or "make Image". The final kernel binary to
>>>>>> put in
>>>>>> +Â Â Â Â Â Â ROM memory will be arch/riscv/boot/xipImage.
>>>>>> +
>>>>>> +Â Â Â Â Â Â If unsure, say N.
>>>>>> +
>>>>>> +config XIP_PHYS_ADDR
>>>>>> +Â Â Â Â hex "XIP Kernel Physical Location"
>>>>>> +Â Â Â Â depends on XIP_KERNEL
>>>>>> +Â Â Â Â default "0x21000000"
>>>>>> +Â Â Â Â help
>>>>>> +Â Â Â Â Â Â This is the physical address in your flash memory the
>>>>>> kernel will
>>>>>> +      be linked for and stored to. This address is dependent on
>>>>>> your
>>>>>> +Â Â Â Â Â Â own flash usage.
>>>>>> +
>>>>>> Â endmenu
>>>>>>
>>>>>> Â config BUILTIN_DTB
>>>>>> -Â Â Â Â def_bool n
>>>>>> +Â Â Â Â bool
>>>>>> Â Â Â Â Â Â depends on OF
>>>>>> +Â Â Â Â default y if XIP_KERNEL
>>>>>>
>>>>>> Â menu "Power management options"
>>>>>>
>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
>>>>>> index 1368d943f1f3..8fcbec03974d 100644
>>>>>> --- a/arch/riscv/Makefile
>>>>>> +++ b/arch/riscv/Makefile
>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>>>>>>
>>>>>> Â # Default target when executing plain make
>>>>>>  boot        := arch/riscv/boot
>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>> +KBUILD_IMAGE := $(boot)/xipImage
>>>>>> +else
>>>>>> Â KBUILD_IMAGE := $(boot)/Image.gz
>>>>>> +endif
>>>>>>
>>>>>> Â head-y := arch/riscv/kernel/head.o
>>>>>>
>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
>>>>>> Â vdso_install:
>>>>>> Â Â Â Â Â Â $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>>>>>>
>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
>>>>>> Â ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
>>>>>> Â KBUILD_IMAGE := $(boot)/loader.bin
>>>>>> Â else
>>>>>> Â KBUILD_IMAGE := $(boot)/Image.gz
>>>>>> Â endif
>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
>>>>>> +endif
>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>>>>>>
>>>>>> Â all: $(notdir $(KBUILD_IMAGE))
>>>>>>
>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
>>>>>> index 03404c84f971..6bf299f70c27 100644
>>>>>> --- a/arch/riscv/boot/Makefile
>>>>>> +++ b/arch/riscv/boot/Makefile
>>>>>> @@ -17,8 +17,21 @@
>>>>>> Â KCOV_INSTRUMENT := n
>>>>>>
>>>>>> Â OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R
>>>>>> .comment -S
>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
>>>>>> -R .comment -S
>>>>>>
>>>>>> Â targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>> xipImage
>>>>>> +
>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>> +
>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
>>>>>> +cmd_mkxip = $(cmd_objcopy)
>>>>>> +
>>>>>> +$(obj)/xipImage: vmlinux FORCE
>>>>>> +Â Â Â Â $(call if_changed,mkxip)
>>>>>> +Â Â Â Â @$(kecho) 'Â Physical Address of xipImage:
>>>>>> $(CONFIG_XIP_PHYS_ADDR)'
>>>>>> +
>>>>>> +endif
>>>>>>
>>>>>> Â $(obj)/Image: vmlinux FORCE
>>>>>> Â Â Â Â Â Â $(call if_changed,objcopy)
>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
>>>>>> b/arch/riscv/include/asm/pgtable.h
>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
>>>>>> --- a/arch/riscv/include/asm/pgtable.h
>>>>>> +++ b/arch/riscv/include/asm/pgtable.h
>>>>>> @@ -11,6 +11,33 @@
>>>>>>
>>>>>> Â #include <asm/pgtable-bits.h>
>>>>>>
>>>>>> +#ifdef CONFIG_MMU
>>>>>> +
>>>>>> +#define VMALLOC_STARTÂ Â Â (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>> +
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +#define VMALLOC_SIZEÂ Â Â Â ((KERN_VIRT_SIZE >> 1) - SZ_16M)
>>>>>> +#define VMALLOC_ENDÂ Â Â Â Â (PAGE_OFFSET - SZ_16M - 1)
>>>>>> +
>>>>>> +#define XIP_OFFSETÂ Â Â Â Â Â Â Â Â Â SZ_8M
>>>>>> +#define XIP_MASKÂ Â Â Â Â Â Â Â Â Â Â Â (SZ_8M - 1)
>>>>>> +#define XIP_VIRT_ADDR(physaddr)Â Â Â Â Â \
>>>>>> +Â Â Â Â (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
>>>>>> +
>>>>>> +#else
>>>>>> +
>>>>>> +#define VMALLOC_SIZEÂ Â Â Â (KERN_VIRT_SIZE >> 1)
>>>>>> +#define VMALLOC_ENDÂ Â Â Â Â (PAGE_OFFSET - 1)
>>>>>> +
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>> +
>>>>>> +#else
>>>>>> +
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>> +#endif /* CONFIG_MMU */
>>>>>> +
>>>>>> Â #ifndef __ASSEMBLY__
>>>>>>
>>>>>> Â /* Page Upper Directory not used in RISC-V */
>>>>>> @@ -21,9 +48,25 @@
>>>>>>
>>>>>> Â #ifdef CONFIG_MMU
>>>>>>
>>>>>> -#define VMALLOC_SIZEÂ Â Â Â (KERN_VIRT_SIZE >> 1)
>>>>>> -#define VMALLOC_ENDÂ Â Â Â Â (PAGE_OFFSET - 1)
>>>>>> -#define VMALLOC_STARTÂ Â Â (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +/*
>>>>>> + * Since we use sections to map it, this macro replaces the
>>>>>> physical address
>>>>>> + * with its virtual address while keeping offset from the base
>>>>>> section.
>>>>>> + */
>>>>>> +#define XIP_PHYS_ADDR(va)Â Â Â Â \
>>>>>> +Â Â Â Â ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
>>>>>> CONFIG_XIP_PHYS_ADDR)
>>>>>> +
>>>>>> +#define XIP_VIRT_ADDR_STARTÂ XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>> +
>>>>>> +#define XIP_FIXUP(addr)Â Â Â Â Â Â Â Â Â Â Â Â Â ({ \
>>>>>> +Â Â Â Â uintptr_t __a = (uintptr_t)(addr); \
>>>>>> +Â Â Â Â (__a >= CONFIG_XIP_PHYS_ADDR && \
>>>>>> +Â Â Â Â Â __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
>>>>>> +Â Â Â Â __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
>>>>>> XIP_OFFSET : __a; \
>>>>>> +})
>>>>>> +#else
>>>>>> +#define XIP_FIXUP(addr)Â Â Â Â Â Â Â Â Â Â Â Â Â (addr)
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>
>>>>>> Â #define BPF_JIT_REGION_SIZEÂ (SZ_128M)
>>>>>> Â #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
>>>>>> @@ -484,8 +527,20 @@ static inline int
>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
>>>>>>
>>>>>> Â #define kern_addr_valid(addr)Â Â (1) /* FIXME */
>>>>>>
>>>>>> -extern void *dtb_early_va;
>>>>>> -extern uintptr_t dtb_early_pa;
>>>>>> +extern void *_dtb_early_va;
>>>>>> +extern uintptr_t _dtb_early_pa;
>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
>>>>>> +
>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
>>>>>> +
>>>>>> +#else
>>>>>> +
>>>>>> +#define dtb_early_va _dtb_early_va
>>>>>> +#define dtb_early_pa _dtb_early_pa
>>>>>> +
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>> +
>>>>>> Â void setup_bootmem(void);
>>>>>> Â void paging_init(void);
>>>>>> Â void misc_mem_init(void);
>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>> index 685fae72b7f5..2413c2997350 100644
>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
>>>>>> long hartid)
>>>>>> Â }
>>>>>> Â #endif
>>>>>>
>>>>>> +static inline unsigned long get_secondary_start_phys(void)
>>>>>> +{
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +Â Â Â Â return XIP_PHYS_ADDR(secondary_start_sbi);
>>>>>> +#else
>>>>>> +Â Â Â Â return __pa_symbol(secondary_start_sbi);
>>>>>> +#endif
>>>>>> +}
>>>>>> +
>>>>>> Â static int sbi_cpu_start(unsigned int cpuid, struct task_struct
>>>>>> *tidle)
>>>>>> Â {
>>>>>> Â Â Â Â Â Â int rc;
>>>>>> -Â Â Â Â unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
>>>>>> +Â Â Â Â unsigned long boot_addr = get_secondary_start_phys();
>>>>>> Â Â Â Â Â Â int hartid = cpuid_to_hartid_map(cpuid);
>>>>>>
>>>>>> Â Â Â Â Â Â cpu_update_secondary_bootdata(cpuid, tidle);
>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>>>>>> index f5a9bad86e58..bbe74e37914f 100644
>>>>>> --- a/arch/riscv/kernel/head.S
>>>>>> +++ b/arch/riscv/kernel/head.S
>>>>>> @@ -9,11 +9,23 @@
>>>>>> Â #include <linux/linkage.h>
>>>>>> Â #include <asm/thread_info.h>
>>>>>> Â #include <asm/page.h>
>>>>>> +#include <asm/pgtable.h>
>>>>>> Â #include <asm/csr.h>
>>>>>> Â #include <asm/hwcap.h>
>>>>>> Â #include <asm/image.h>
>>>>>> Â #include "efi-header.S"
>>>>>>
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>> +Â Â Â Â REG_L t0, _xip_fixup
>>>>>> +Â Â Â Â add \reg, \reg, t0
>>>>>> +.endm
>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
>>>>>> XIP_OFFSET
>>>>>> +#else
>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>> +.endm
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>> +
>>>>>> Â __HEAD
>>>>>> Â ENTRY(_start)
>>>>>> Â Â Â Â Â Â /*
>>>>>> @@ -69,7 +81,11 @@ pe_head_start:
>>>>>> Â #ifdef CONFIG_MMU
>>>>>> Â relocate:
>>>>>> Â Â Â Â Â Â /* Relocate return address */
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +Â Â Â Â li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>> +#else
>>>>>> Â Â Â Â Â Â li a1, PAGE_OFFSET
>>>>>> +#endif
>>>>>> Â Â Â Â Â Â la a2, _start
>>>>>> Â Â Â Â Â Â sub a1, a1, a2
>>>>>> Â Â Â Â Â Â add ra, ra, a1
>>>>>> @@ -91,6 +107,7 @@ relocate:
>>>>>> Â Â Â Â Â Â Â * to ensure the new translations are in use.
>>>>>> Â Â Â Â Â Â Â */
>>>>>> Â Â Â Â Â Â la a0, trampoline_pg_dir
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a0
>>>>>> Â Â Â Â Â Â srl a0, a0, PAGE_SHIFT
>>>>>> Â Â Â Â Â Â or a0, a0, a1
>>>>>> Â Â Â Â Â Â sfence.vma
>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
>>>>>>
>>>>>> Â Â Â Â Â Â slli a3, a0, LGREG
>>>>>> Â Â Â Â Â Â la a4, __cpu_up_stack_pointer
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a4
>>>>>> Â Â Â Â Â Â la a5, __cpu_up_task_pointer
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a5
>>>>>> Â Â Â Â Â Â add a4, a3, a4
>>>>>> Â Â Â Â Â Â add a5, a3, a5
>>>>>> Â Â Â Â Â Â REG_L sp, (a4)
>>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
>>>>>> Â #ifdef CONFIG_MMU
>>>>>> Â Â Â Â Â Â /* Enable virtual memory and relocate to virtual address */
>>>>>> Â Â Â Â Â Â la a0, swapper_pg_dir
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a0
>>>>>> Â Â Â Â Â Â call relocate
>>>>>> Â #endif
>>>>>> Â Â Â Â Â Â call setup_trap_vector
>>>>>> @@ -236,12 +256,33 @@ pmp_done:
>>>>>> Â .Lgood_cores:
>>>>>> Â #endif
>>>>>>
>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>> Â Â Â Â Â Â /* Pick one hart to run the main boot sequence */
>>>>>> Â Â Â Â Â Â la a3, hart_lottery
>>>>>> Â Â Â Â Â Â li a2, 1
>>>>>> Â Â Â Â Â Â amoadd.w a3, a2, (a3)
>>>>>> Â Â Â Â Â Â bnez a3, .Lsecondary_start
>>>>>>
>>>>>> +#else
>>>>>> +Â Â Â Â /* hart_lottery in flash contains a magic number */
>>>>>> +Â Â Â Â la a3, hart_lottery
>>>>>> +Â Â Â Â mv a2, a3
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a2
>>>>>> +Â Â Â Â lw t1, (a3)
>>>>>> +Â Â Â Â amoswap.w t0, t1, (a2)
>>>>>> +Â Â Â Â /* first time here if hart_lottery in RAM is not set */
>>>>>> +Â Â Â Â beq t0, t1, .Lsecondary_start
>>>>>> +
>>>>>> +Â Â Â Â la sp, _end + THREAD_SIZE
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET sp
>>>>>> +Â Â Â Â mv s0, a0
>>>>>> +Â Â Â Â call __copy_data
>>>>>> +
>>>>>> +Â Â Â Â /* Restore a0 copy */
>>>>>> +Â Â Â Â mv a0, s0
>>>>>> +#endif
>>>>>> +
>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>> Â Â Â Â Â Â /* Clear BSS for flat non-ELF images */
>>>>>> Â Â Â Â Â Â la a3, __bss_start
>>>>>> Â Â Â Â Â Â la a4, __bss_stop
>>>>>> @@ -251,15 +292,18 @@ clear_bss:
>>>>>> Â Â Â Â Â Â add a3, a3, RISCV_SZPTR
>>>>>> Â Â Â Â Â Â blt a3, a4, clear_bss
>>>>>> Â clear_bss_done:
>>>>>> -
>>>>>> +#endif
>>>>>> Â Â Â Â Â Â /* Save hart ID and DTB physical address */
>>>>>> Â Â Â Â Â Â mv s0, a0
>>>>>> Â Â Â Â Â Â mv s1, a1
>>>>>> +
>>>>>> Â Â Â Â Â Â la a2, boot_cpu_hartid
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a2
>>>>>> Â Â Â Â Â Â REG_S a0, (a2)
>>>>>>
>>>>>> Â Â Â Â Â Â /* Initialize page tables and relocate to virtual addresses */
>>>>>> Â Â Â Â Â Â la sp, init_thread_union + THREAD_SIZE
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET sp
>>>>>> Â #ifdef CONFIG_BUILTIN_DTB
>>>>>> Â Â Â Â Â Â la a0, __dtb_start
>>>>>> Â #else
>>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
>>>>>> Â Â Â Â Â Â call setup_vm
>>>>>> Â #ifdef CONFIG_MMU
>>>>>> Â Â Â Â Â Â la a0, early_pg_dir
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a0
>>>>>> Â Â Â Â Â Â call relocate
>>>>>> Â #endif /* CONFIG_MMU */
>>>>>>
>>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
>>>>>>
>>>>>> Â Â Â Â Â Â slli a3, a0, LGREG
>>>>>> Â Â Â Â Â Â la a1, __cpu_up_stack_pointer
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a1
>>>>>> Â Â Â Â Â Â la a2, __cpu_up_task_pointer
>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a2
>>>>>> Â Â Â Â Â Â add a1, a3, a1
>>>>>> Â Â Â Â Â Â add a2, a3, a2
>>>>>>
>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
>>>>>> --- a/arch/riscv/kernel/head.h
>>>>>> +++ b/arch/riscv/kernel/head.h
>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>>>>>>
>>>>>> Â asmlinkage void do_page_fault(struct pt_regs *regs);
>>>>>> Â asmlinkage void __init setup_vm(uintptr_t dtb_pa);
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +asmlinkage void __init __copy_data(void);
>>>>>> +#endif
>>>>>>
>>>>>> Â extern void *__cpu_up_stack_pointer[];
>>>>>> Â extern void *__cpu_up_task_pointer[];
>>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>>>>>> index e85bacff1b50..a0384c72c272 100644
>>>>>> --- a/arch/riscv/kernel/setup.c
>>>>>> +++ b/arch/riscv/kernel/setup.c
>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
>>>>>> __section(".data") = {
>>>>>> Â Â * This is used before the kernel initializes the BSS so it
>>>>>> can't be in the
>>>>>> Â Â * BSS.
>>>>>> Â Â */
>>>>>> -atomic_t hart_lottery __section(".sdata");
>>>>>> +atomic_t hart_lottery __section(".sdata")
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> += ATOMIC_INIT(0xC001BEEF)
>>>>>> +#endif
>>>>>> +;
>>>>>> Â unsigned long boot_cpu_hartid;
>>>>>> Â static DEFINE_PER_CPU(struct cpu, cpu_devices);
>>>>>>
>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
>>>>>> Â #if IS_ENABLED(CONFIG_BUILTIN_DTB)
>>>>>> Â Â Â Â Â Â unflatten_and_copy_device_tree();
>>>>>> Â #else
>>>>>> -Â Â Â Â if (early_init_dt_verify(__va(dtb_early_pa)))
>>>>>> +Â Â Â Â if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â unflatten_device_tree();
>>>>>> Â Â Â Â Â Â else
>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("No DTB found in kernel mappings\n");
>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>> new file mode 100644
>>>>>> index 000000000000..9f0f08c34cd3
>>>>>> --- /dev/null
>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>> @@ -0,0 +1,132 @@
>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>>>>> +/*
>>>>>> + * Copyright (C) 2012 Regents of the University of California
>>>>>> + * Copyright (C) 2017 SiFive
>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
>>>>>> + */
>>>>>> +
>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>> +/* No __ro_after_init data in the .rodata section - which will
>>>>>> always be ro */
>>>>>> +#define RO_AFTER_INIT_DATA
>>>>>> +
>>>>>> +#include <asm/vmlinux.lds.h>
>>>>>> +#include <asm/page.h>
>>>>>> +#include <asm/pgtable.h>
>>>>>> +#include <asm/cache.h>
>>>>>> +#include <asm/thread_info.h>
>>>>>> +
>>>>>> +OUTPUT_ARCH(riscv)
>>>>>> +ENTRY(_start)
>>>>>> +
>>>>>> +jiffies = jiffies_64;
>>>>>> +
>>>>>> +SECTIONS
>>>>>> +{
>>>>>> +Â Â Â Â /* Beginning of code and text segment */
>>>>>> +Â Â Â Â . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
>>>>>> +Â Â Â Â _xiprom = .;
>>>>>> +Â Â Â Â _start = .;
>>>>>> +Â Â Â Â HEAD_TEXT_SECTION
>>>>>> +Â Â Â Â INIT_TEXT_SECTION(PAGE_SIZE)
>>>>>> +Â Â Â Â /* we have to discard exit text and such at runtime, not
>>>>>> link time */
>>>>>> +Â Â Â Â .exit.text :
>>>>>> +Â Â Â Â {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â EXIT_TEXT
>>>>>> +Â Â Â Â }
>>>>>> +
>>>>>> +Â Â Â Â .text : {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â _text = .;
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â _stext = .;
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â TEXT_TEXT
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â SCHED_TEXT
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â CPUIDLE_TEXT
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â LOCK_TEXT
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â KPROBES_TEXT
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â ENTRY_TEXT
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â IRQENTRY_TEXT
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â SOFTIRQENTRY_TEXT
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.fixup)
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â _etext = .;
>>>>>> +Â Â Â Â }
>>>>>> +Â Â Â Â RO_DATA(L1_CACHE_BYTES)
>>>>>> +Â Â Â Â .srodata : {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.srodata*)
>>>>>> +Â Â Â Â }
>>>>>> +Â Â Â Â .init.rodata : {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_SETUP(16)
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_CALLS
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â CON_INITCALL
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_RAM_FS
>>>>>> +Â Â Â Â }
>>>>>> +Â Â Â Â _exiprom = .;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* End of XIP ROM area */
>>>>>> +
>>>>>> +
>>>>>> +/*
>>>>>> + * From this point, stuff is considered writable and will be
>>>>>> copied to RAM
>>>>>> + */
>>>>>> +Â Â Â Â __data_loc = ALIGN(16);Â Â Â Â Â Â Â Â /* location in file */
>>>>>> +Â Â Â Â . = PAGE_OFFSET;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* location in memory */
>>>>>> +
>>>>>> +Â Â Â Â _sdata = .;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* Start of data section */
>>>>>> +Â Â Â Â _data = .;
>>>>>> +Â Â Â Â RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
>>>>>> +Â Â Â Â _edata = .;
>>>>>> +Â Â Â Â __start_ro_after_init = .;
>>>>>> +Â Â Â Â .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
>>>>>> LOAD_OFFSET) {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.data..ro_after_init)
>>>>>> +Â Â Â Â }
>>>>>> +Â Â Â Â __end_ro_after_init = .;
>>>>>> +
>>>>>> +Â Â Â Â . = ALIGN(PAGE_SIZE);
>>>>>> +Â Â Â Â __init_begin = .;
>>>>>> +Â Â Â Â .init.data : {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_DATA
>>>>>> +Â Â Â Â }
>>>>>> +Â Â Â Â .exit.data : {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â EXIT_DATA
>>>>>> +Â Â Â Â }
>>>>>> +Â Â Â Â . = ALIGN(8);
>>>>>> +Â Â Â Â __soc_early_init_table : {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_early_init_table_start = .;
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â KEEP(*(__soc_early_init_table))
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_early_init_table_end = .;
>>>>>> +Â Â Â Â }
>>>>>> +Â Â Â Â __soc_builtin_dtb_table : {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_builtin_dtb_table_start = .;
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â KEEP(*(__soc_builtin_dtb_table))
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_builtin_dtb_table_end = .;
>>>>>> +Â Â Â Â }
>>>>>> +Â Â Â Â PERCPU_SECTION(L1_CACHE_BYTES)
>>>>>> +
>>>>>> +Â Â Â Â . = ALIGN(PAGE_SIZE);
>>>>>> +Â Â Â Â __init_end = .;
>>>>>> +
>>>>>> +Â Â Â Â .sdata : {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __global_pointer$ = . + 0x800;
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.sdata*)
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.sbss*)
>>>>>> +Â Â Â Â }
>>>>>> +
>>>>>> +Â Â Â Â BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>>>>>> +Â Â Â Â EXCEPTION_TABLE(0x10)
>>>>>> +
>>>>>> +Â Â Â Â .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.rel.dyn*)
>>>>>> +Â Â Â Â }
>>>>>> +
>>>>>> +Â Â Â Â /*
>>>>>> +Â Â Â Â Â * End of copied data. We need a dummy section to get its LMA.
>>>>>> +Â Â Â Â Â * Also located before final ALIGN() as trailing padding is
>>>>>> not stored
>>>>>> +Â Â Â Â Â * in the resulting binary file and useless to copy.
>>>>>> +Â Â Â Â Â */
>>>>>> +Â Â Â Â .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
>>>>>> +Â Â Â Â _edata_loc = LOADADDR(.data.endmark);
>>>>>> +
>>>>>> +Â Â Â Â . = ALIGN(PAGE_SIZE);
>>>>>> +Â Â Â Â _end = .;
>>>>>> +
>>>>>> +Â Â Â Â STABS_DEBUG
>>>>>> +Â Â Â Â DWARF_DEBUG
>>>>>> +
>>>>>> +Â Â Â Â DISCARDS
>>>>>> +}
>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
>>>>>> b/arch/riscv/kernel/vmlinux.lds.S
>>>>>> index de03cb22d0e9..6745ec325930 100644
>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
>>>>>> @@ -4,7 +4,12 @@
>>>>>> Â Â * Copyright (C) 2017 SiFive
>>>>>> Â Â */
>>>>>>
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +#include "vmlinux-xip.lds.S"
>>>>>> +#else
>>>>>> +
>>>>>> Â #define LOAD_OFFSET PAGE_OFFSET
>>>>>> +
>>>>>> Â #include <asm/vmlinux.lds.h>
>>>>>> Â #include <asm/page.h>
>>>>>> Â #include <asm/cache.h>
>>>>>> @@ -132,3 +137,4 @@ SECTIONS
>>>>>>
>>>>>> Â Â Â Â Â Â DISCARDS
>>>>>> Â }
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
>>>>>> index 7f5036fbee8c..efe649d41f95 100644
>>>>>> --- a/arch/riscv/mm/init.c
>>>>>> +++ b/arch/riscv/mm/init.c
>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>>>>>>
>>>>>> Â extern char _start[];
>>>>>> Â #define DTB_EARLY_BASE_VAÂ Â Â Â Â PGDIR_SIZE
>>>>>> -void *dtb_early_va __initdata;
>>>>>> -uintptr_t dtb_early_pa __initdata;
>>>>>> +void *_dtb_early_va __initdata;
>>>>>> +uintptr_t _dtb_early_pa __initdata;
>>>>>>
>>>>>> Â struct pt_alloc_ops {
>>>>>> Â Â Â Â Â Â pte_t *(*get_pte_virt)(phys_addr_t pa);
>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)VMALLOC_END);
>>>>>> Â Â Â Â Â Â print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)high_memory);
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +Â Â Â Â print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>> Â }
>>>>>> Â #else
>>>>>> Â static void print_vm_layout(void) { }
>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
>>>>>> Â Â Â Â Â Â phys_addr_t dram_end = memblock_end_of_DRAM();
>>>>>> Â Â Â Â Â Â phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>>>>>>
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +Â Â Â Â vmlinux_start = __pa_symbol(&_sdata);
>>>>>> +#endif
>>>>>> +
>>>>>> Â Â Â Â Â Â /* The maximal physical memory size is -PAGE_OFFSET. */
>>>>>> Â Â Â Â Â Â memblock_enforce_memory_limit(-PAGE_OFFSET);
>>>>>>
>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
>>>>>> Â Â Â Â Â Â memblock_allow_resize();
>>>>>> Â }
>>>>>>
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +
>>>>>> +extern char _xiprom[], _exiprom[];
>>>>>> +extern char _sdata[], _edata[];
>>>>>> +
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>> +
>>>>>> Â #ifdef CONFIG_MMU
>>>>>> -static struct pt_alloc_ops pt_ops;
>>>>>> +static struct pt_alloc_ops _pt_ops;
>>>>>> +
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
>>>>>> +#else
>>>>>> +#define pt_ops      _pt_ops
>>>>>> +#endif
>>>>>>
>>>>>> Â unsigned long va_pa_offset;
>>>>>> Â EXPORT_SYMBOL(va_pa_offset);
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
>>>>>> +#endif
>>>>>> Â unsigned long pfn_base;
>>>>>> Â EXPORT_SYMBOL(pfn_base);
>>>>>>
>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
>>>>>> __page_aligned_bss;
>>>>>>
>>>>>> Â pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
>>>>>>
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +#define trampoline_pg_dir   ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
>>>>>> +#define fixmap_pte          ((pte_t *)XIP_FIXUP(fixmap_pte))
>>>>>> +#define early_pg_dir        ((pgd_t *)XIP_FIXUP(early_pg_dir))
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>> +
>>>>>> Â void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
>>>>>> pgprot_t prot)
>>>>>> Â {
>>>>>> Â Â Â Â Â Â unsigned long addr = __fix_to_virt(idx);
>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
>>>>>> __page_aligned_bss;
>>>>>> Â pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>>> Â pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>>>
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>>>>> +
>>>>>> +#define trampoline_pmd      ((pmd_t *)XIP_FIXUP(trampoline_pmd))
>>>>>> +#define fixmap_pmd  ((pmd_t *)XIP_FIXUP(fixmap_pmd))
>>>>>> +#define xip_pmd             ((pmd_t *)XIP_FIXUP(xip_pmd))
>>>>>> +#define early_pmd   ((pmd_t *)XIP_FIXUP(early_pmd))
>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>> +
>>>>>> Â static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
>>>>>> Â {
>>>>>> Â Â Â Â Â Â /* Before MMU is enabled */
>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>> Â Â Â Â Â Â return PMD_SIZE;
>>>>>> Â }
>>>>>>
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +/* called from head.S with MMU off */
>>>>>> +asmlinkage void __init __copy_data(void)
>>>>>> +{
>>>>>> +Â Â Â Â void *from = (void *)(&_sdata);
>>>>>> +Â Â Â Â void *end = (void *)(&_end);
>>>>>> +Â Â Â Â void *to = (void *)CONFIG_PHYS_RAM_BASE;
>>>>>> +Â Â Â Â size_t sz = (size_t)(end - from);
>>>>>> +
>>>>>> +Â Â Â Â memcpy(to, from, sz);
>>>>>> +}
>>>>>> +#endif
>>>>>> +
>>>>>> Â /*
>>>>>> Â Â * setup_vm() is called from head.S with MMU-off.
>>>>>> Â Â *
>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>>
>>>>>> Â asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>>> Â {
>>>>>> -Â Â Â Â uintptr_t va, pa, end_va;
>>>>>> +Â Â Â Â uintptr_t va, end_va;
>>>>>> +Â Â Â Â uintptr_t __maybe_unused pa;
>>>>>> Â Â Â Â Â Â uintptr_t load_pa = (uintptr_t)(&_start);
>>>>>> Â Â Â Â Â Â uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
>>>>>> Â Â Â Â Â Â uintptr_t map_size;
>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>> dtb_pa)
>>>>>> Â Â Â Â Â Â pmd_t fix_bmap_spmd, fix_bmap_epmd;
>>>>>> Â #endif
>>>>>>
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +Â Â Â Â uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
>>>>>> +Â Â Â Â uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>> (uintptr_t)(&_xiprom);
>>>>>> +
>>>>>> +Â Â Â Â load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
>>>>>> +Â Â Â Â load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
>>>>>> +#endif
>>>>>> Â Â Â Â Â Â va_pa_offset = PAGE_OFFSET - load_pa;
>>>
>>> I should have seen this before, I was too focused on having a XIP kernel
>>> boot. I already moved the kernel mapping in the vmalloc zone: the
>>> virtual to physical translations need to be handled differently now that
>>> the kernel mapping does not lie into linear mapping anymore, we can't
>>> use va_pa_offset defined above for both mappings.
>>>
>>> I was rebasing my patchset on the XIP patch but I believe that doing the
>>> other way around would greatly simplify the XIP patch as the kernel
>>> mapping would already be moved outside the linear mapping, there would
>>> be no need to reserve a zone in vmalloc anymore (that simplifies
>>> pgtable.h quite a lot). And the XIP kernel mapping could be implemented
>>> in a new create_kernel_page_table (that would also simplify mm/init.c).
>>>
>>> I can help to do that but I don't think we should merge this patch as is
>>> now.
>>
>> I think that's the right way to go for now: it's a lot harder to test
>> the XIP stuff, as it requires a bunch of harness changes. So let's
>> take the page table refactoring in now and rebase this stuff on top of
>> it. There's really no way to do both without making more work for
>> someone, it's just a headache on timing.
>>
>> Alex: if you want to sign up to spend some time there that'd be great,
>> otherwise I will.
>
> I can take care of that, no problem.
Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
https://github.com/AlexGhiti/riscv-linux ? This boots fine using my setup.
I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
any other kernel at the end of the address space, not in the vmalloc
zone as you proposed. And I fixed a few thigns along the way (pfn_base,
pfn_valid, copy_data and other stuff).
Any comment is welcome !
Thanks,
Alex
>
>> Either way, can you point me (either just indicate the old version is
>> OK or send a new one) to what you want me to look at WRT the page
>> table code? IIRC it looked pretty much fine, but I'll take another
>> look ASAP so we can avoid serializing everything.
>
> The v3 is fine for me:
> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
>
>>
>>>
>>> Alex
>>>
>>>>>> Â Â Â Â Â Â pfn_base = PFN_DOWN(load_pa);
>>>>>>
>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>> dtb_pa)
>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
>>>>>> Â #endif
>>>>>>
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +Â Â Â Â create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>>>>> +Â Â Â Â for (va = XIP_VIRT_ADDR_START;
>>>>>> +Â Â Â Â Â Â Â Â Â va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>> +Â Â Â Â Â Â Â Â Â va += PMD_SIZE) {
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â create_pmd_mapping(xip_pmd, va,
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â xiprom + (va - XIP_VIRT_ADDR_START),
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â PMD_SIZE, PAGE_KERNEL_EXEC);
>>>>>> +Â Â Â Â }
>>>>>> +
>>>>>> +Â Â Â Â create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>>>>> +#endif
>>>>>> +
>>>>>> Â Â Â Â Â Â /*
>>>>>> Â Â Â Â Â Â Â * Setup early PGD covering entire kernel which will allows
>>>>>> Â Â Â Â Â Â Â * us to reach paging_init(). We map all memory banks later
>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
>>>>>> Â Â Â Â Â Â dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>> (PMD_SIZE - 1));
>>>>>> Â #else /* CONFIG_BUILTIN_DTB */
>>>>>> -Â Â Â Â dtb_early_va = __va(dtb_pa);
>>>>>> +Â Â Â Â dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>> Â #endif /* CONFIG_BUILTIN_DTB */
>>>>>> Â #else
>>>>>> Â #ifndef CONFIG_BUILTIN_DTB
>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
>>>>>> Â Â Â Â Â Â dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>> (PGDIR_SIZE - 1));
>>>>>> Â #else /* CONFIG_BUILTIN_DTB */
>>>>>> -Â Â Â Â dtb_early_va = __va(dtb_pa);
>>>>>> +Â Â Â Â dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>> Â #endif /* CONFIG_BUILTIN_DTB */
>>>>>> Â #endif
>>>>>> Â Â Â Â Â Â dtb_early_pa = dtb_pa;
>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
>>>>>> Â Â Â Â Â Â uintptr_t va, map_size;
>>>>>> Â Â Â Â Â Â phys_addr_t pa, start, end;
>>>>>> Â Â Â Â Â Â u64 i;
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +Â Â Â Â uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>> (uintptr_t)(&_xiprom);
>>>>>> +#endif
>>>>>>
>>>>>> Â Â Â Â Â Â /**
>>>>>> Â Â Â Â Â Â Â * MMU is enabled at this point. But page table setup is
>>>>>> not complete yet.
>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â map_size,
>>>>>> PAGE_KERNEL_EXEC);
>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â }
>>>>>> Â Â Â Â Â Â }
>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>> +Â Â Â Â map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
>>>>>> +Â Â Â Â for (va = XIP_VIRT_ADDR_START;
>>>>>> +Â Â Â Â Â Â Â Â Â va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>> +Â Â Â Â Â Â Â Â Â va += map_size)
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â create_pgd_mapping(swapper_pg_dir, va,
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â CONFIG_XIP_PHYS_ADDR + (va -
>>>>>> XIP_VIRT_ADDR_START),
>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â map_size, PAGE_KERNEL_EXEC);
>>>>>> +
>>>>>> +#endif
>>>>>>
>>>>>> Â Â Â Â Â Â /* Clear fixmap PTE and PMD mappings */
>>>>>> Â Â Â Â Â Â clear_fixmap(FIX_PTE);
>>>>
>>>> _______________________________________________
>>>> linux-riscv mailing list
>>>> [email protected]
>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>
>>
>> _______________________________________________
>> linux-riscv mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Hi Alex,
On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <[email protected]> wrote:
>
> Hi,
>
> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
> > Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
> >> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
> >>>
> >>>
> >>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
> >>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
> >>>> <[email protected]> wrote:
> >>>>>
> >>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
> >>>>> wrote:
> >>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> >>>>>> It allows code to be executed directly from non-volatile storage
> >>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
> >>>>>> be found on many RISC-V platforms. This makes way for significant
> >>>>>> optimization of RAM footprint. The XIP kernel is not compressed
> >>>>>> since it has to run directly from flash, so it will occupy more
> >>>>>> space on the non-volatile storage. The physical flash address used
> >>>>>> to link the kernel object files and for storing it has to be known
> >>>>>> at compile time and is represented by a Kconfig option.
> >>>>>>
> >>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
> >>>>>> kernels.
> >>>>>>
> >>>>>> Signed-off-by: Vitaly Wool <[email protected]>
> >>>>>>
> >>>>>> ---
> >>>>>>
> >>>>>> Changes in v2:
> >>>>>> - dedicated macro for XIP address fixup when MMU is not enabled yet
> >>>>>> o both for 32-bit and 64-bit RISC-V
> >>>>>> - SP is explicitly set to a safe place in RAM before __copy_data call
> >>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
> >>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> >>>>>> Changes in v3:
> >>>>>> - rebased against latest for-next
> >>>>>> - XIP address fixup macro now takes an argument
> >>>>>> - SMP related fixes
> >>>>>> Changes in v4:
> >>>>>> - rebased against the current for-next
> >>>>>> - less #ifdef's in C/ASM code
> >>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> >>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
> >>>>>> - Fixed multi-core boot
> >>>>>> Changes in v5:
> >>>>>> - fixed build error for non-XIP kernels
> >>>>>> Changes in v6:
> >>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> >>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> >>>>>> PHYS_RAM_BASE in non-XIP configurations if needed
> >>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
> >>>>>> effects
> >>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
> >>>>>
> >>>>> So v5 landed on for-next, which generally means it's best to avoid
> >>>>> re-spinning the patch and instead send along fixups. That said,
> >>>>> the v5
> >>>>> is causing some testing failures for me.
> >>>>>
> >>>>> I'm going to drop the v5 for now as I don't have time to test this
> >>>>> tonight. I'll try and take a look soon, as it will conflict with
> >>>>> Alex's
> >>>>> patches.
> >>>>
> >>>> I can come up with the incremental patch instead pretty much straight
> >>>> away if that works better.
> >>>>
> >>>> ~Vitaly
> >>>>
> >>>>>> arch/riscv/Kconfig | 49 ++++++++++-
> >>>>>> arch/riscv/Makefile | 8 +-
> >>>>>> arch/riscv/boot/Makefile | 13 +++
> >>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> >>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> >>>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
> >>>>>> arch/riscv/kernel/head.h | 3 +
> >>>>>> arch/riscv/kernel/setup.c | 8 +-
> >>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132
> >>>>>> ++++++++++++++++++++++++++++
> >>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> >>>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> >>>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
> >>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>
> >>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
> >>>>>> --- a/arch/riscv/Kconfig
> >>>>>> +++ b/arch/riscv/Kconfig
> >>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
> >>>>>>
> >>>>>> config EFI
> >>>>>> bool "UEFI runtime support"
> >>>>>> - depends on OF
> >>>>>> + depends on OF && !XIP_KERNEL
> >>>>>> select LIBFDT
> >>>>>> select UCS2_STRING
> >>>>>> select EFI_PARAMS_FROM_FDT
> >>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> >>>>>> def_bool y
> >>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
> >>>>>>
> >>>>>> +config PHYS_RAM_BASE_FIXED
> >>>>>> + bool "Explicitly specified physical RAM address"
> >>>>>> + default n
> >>>>>> +
> >>>>>> +config PHYS_RAM_BASE
> >>>>>> + hex "Platform Physical RAM address"
> >>>>>> + depends on PHYS_RAM_BASE_FIXED
> >>>>>> + default "0x80000000"
> >>>>>> + help
> >>>>>> + This is the physical address of RAM in the system. It has
> >>>>>> to be
> >>>>>> + explicitly specified to run early relocations of
> >>>>>> read-write data
> >>>>>> + from flash to RAM.
> >>>>>> +
> >>>>>> +config XIP_KERNEL
> >>>>>> + bool "Kernel Execute-In-Place from ROM"
> >>>>>> + depends on MMU
> >>>>>> + select PHYS_RAM_BASE_FIXED
> >>>>>> + help
> >>>>>> + Execute-In-Place allows the kernel to run from
> >>>>>> non-volatile storage
> >>>>>> + directly addressable by the CPU, such as NOR flash. This
> >>>>>> saves RAM
> >>>>>> + space since the text section of the kernel is not loaded
> >>>>>> from flash
> >>>>>> + to RAM. Read-write sections, such as the data section and
> >>>>>> stack,
> >>>>>> + are still copied to RAM. The XIP kernel is not compressed
> >>>>>> since
> >>>>>> + it has to run directly from flash, so it will take more
> >>>>>> space to
> >>>>>> + store it. The flash address used to link the kernel
> >>>>>> object files,
> >>>>>> + and for storing it, is configuration dependent. Therefore,
> >>>>>> if you
> >>>>>> + say Y here, you must know the proper physical address
> >>>>>> where to
> >>>>>> + store the kernel image depending on your own flash memory
> >>>>>> usage.
> >>>>>> +
> >>>>>> + Also note that the make target becomes "make xipImage"
> >>>>>> rather than
> >>>>>> + "make zImage" or "make Image". The final kernel binary to
> >>>>>> put in
> >>>>>> + ROM memory will be arch/riscv/boot/xipImage.
> >>>>>> +
> >>>>>> + If unsure, say N.
> >>>>>> +
> >>>>>> +config XIP_PHYS_ADDR
> >>>>>> + hex "XIP Kernel Physical Location"
> >>>>>> + depends on XIP_KERNEL
> >>>>>> + default "0x21000000"
> >>>>>> + help
> >>>>>> + This is the physical address in your flash memory the
> >>>>>> kernel will
> >>>>>> + be linked for and stored to. This address is dependent on
> >>>>>> your
> >>>>>> + own flash usage.
> >>>>>> +
> >>>>>> endmenu
> >>>>>>
> >>>>>> config BUILTIN_DTB
> >>>>>> - def_bool n
> >>>>>> + bool
> >>>>>> depends on OF
> >>>>>> + default y if XIP_KERNEL
> >>>>>>
> >>>>>> menu "Power management options"
> >>>>>>
> >>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> >>>>>> index 1368d943f1f3..8fcbec03974d 100644
> >>>>>> --- a/arch/riscv/Makefile
> >>>>>> +++ b/arch/riscv/Makefile
> >>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >>>>>>
> >>>>>> # Default target when executing plain make
> >>>>>> boot := arch/riscv/boot
> >>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>> +KBUILD_IMAGE := $(boot)/xipImage
> >>>>>> +else
> >>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>> +endif
> >>>>>>
> >>>>>> head-y := arch/riscv/kernel/head.o
> >>>>>>
> >>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
> >>>>>> vdso_install:
> >>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> >>>>>>
> >>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
> >>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> >>>>>> KBUILD_IMAGE := $(boot)/loader.bin
> >>>>>> else
> >>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>> endif
> >>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
> >>>>>> +endif
> >>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> >>>>>>
> >>>>>> all: $(notdir $(KBUILD_IMAGE))
> >>>>>>
> >>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> >>>>>> index 03404c84f971..6bf299f70c27 100644
> >>>>>> --- a/arch/riscv/boot/Makefile
> >>>>>> +++ b/arch/riscv/boot/Makefile
> >>>>>> @@ -17,8 +17,21 @@
> >>>>>> KCOV_INSTRUMENT := n
> >>>>>>
> >>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R
> >>>>>> .comment -S
> >>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
> >>>>>> -R .comment -S
> >>>>>>
> >>>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>> xipImage
> >>>>>> +
> >>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>> +
> >>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> >>>>>> +cmd_mkxip = $(cmd_objcopy)
> >>>>>> +
> >>>>>> +$(obj)/xipImage: vmlinux FORCE
> >>>>>> + $(call if_changed,mkxip)
> >>>>>> + @$(kecho) ' Physical Address of xipImage:
> >>>>>> $(CONFIG_XIP_PHYS_ADDR)'
> >>>>>> +
> >>>>>> +endif
> >>>>>>
> >>>>>> $(obj)/Image: vmlinux FORCE
> >>>>>> $(call if_changed,objcopy)
> >>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
> >>>>>> b/arch/riscv/include/asm/pgtable.h
> >>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
> >>>>>> --- a/arch/riscv/include/asm/pgtable.h
> >>>>>> +++ b/arch/riscv/include/asm/pgtable.h
> >>>>>> @@ -11,6 +11,33 @@
> >>>>>>
> >>>>>> #include <asm/pgtable-bits.h>
> >>>>>>
> >>>>>> +#ifdef CONFIG_MMU
> >>>>>> +
> >>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>> +
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> >>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> >>>>>> +
> >>>>>> +#define XIP_OFFSET SZ_8M
> >>>>>> +#define XIP_MASK (SZ_8M - 1)
> >>>>>> +#define XIP_VIRT_ADDR(physaddr) \
> >>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> >>>>>> +
> >>>>>> +#else
> >>>>>> +
> >>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>> +
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> +#else
> >>>>>> +
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +#endif /* CONFIG_MMU */
> >>>>>> +
> >>>>>> #ifndef __ASSEMBLY__
> >>>>>>
> >>>>>> /* Page Upper Directory not used in RISC-V */
> >>>>>> @@ -21,9 +48,25 @@
> >>>>>>
> >>>>>> #ifdef CONFIG_MMU
> >>>>>>
> >>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +/*
> >>>>>> + * Since we use sections to map it, this macro replaces the
> >>>>>> physical address
> >>>>>> + * with its virtual address while keeping offset from the base
> >>>>>> section.
> >>>>>> + */
> >>>>>> +#define XIP_PHYS_ADDR(va) \
> >>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
> >>>>>> CONFIG_XIP_PHYS_ADDR)
> >>>>>> +
> >>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>> +
> >>>>>> +#define XIP_FIXUP(addr) ({ \
> >>>>>> + uintptr_t __a = (uintptr_t)(addr); \
> >>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
> >>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> >>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
> >>>>>> XIP_OFFSET : __a; \
> >>>>>> +})
> >>>>>> +#else
> >>>>>> +#define XIP_FIXUP(addr) (addr)
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>
> >>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
> >>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> >>>>>> @@ -484,8 +527,20 @@ static inline int
> >>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
> >>>>>>
> >>>>>> #define kern_addr_valid(addr) (1) /* FIXME */
> >>>>>>
> >>>>>> -extern void *dtb_early_va;
> >>>>>> -extern uintptr_t dtb_early_pa;
> >>>>>> +extern void *_dtb_early_va;
> >>>>>> +extern uintptr_t _dtb_early_pa;
> >>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> >>>>>> +
> >>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> >>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> >>>>>> +
> >>>>>> +#else
> >>>>>> +
> >>>>>> +#define dtb_early_va _dtb_early_va
> >>>>>> +#define dtb_early_pa _dtb_early_pa
> >>>>>> +
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> void setup_bootmem(void);
> >>>>>> void paging_init(void);
> >>>>>> void misc_mem_init(void);
> >>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>> index 685fae72b7f5..2413c2997350 100644
> >>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
> >>>>>> long hartid)
> >>>>>> }
> >>>>>> #endif
> >>>>>>
> >>>>>> +static inline unsigned long get_secondary_start_phys(void)
> >>>>>> +{
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
> >>>>>> +#else
> >>>>>> + return __pa_symbol(secondary_start_sbi);
> >>>>>> +#endif
> >>>>>> +}
> >>>>>> +
> >>>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct
> >>>>>> *tidle)
> >>>>>> {
> >>>>>> int rc;
> >>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> >>>>>> + unsigned long boot_addr = get_secondary_start_phys();
> >>>>>> int hartid = cpuid_to_hartid_map(cpuid);
> >>>>>>
> >>>>>> cpu_update_secondary_bootdata(cpuid, tidle);
> >>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> >>>>>> index f5a9bad86e58..bbe74e37914f 100644
> >>>>>> --- a/arch/riscv/kernel/head.S
> >>>>>> +++ b/arch/riscv/kernel/head.S
> >>>>>> @@ -9,11 +9,23 @@
> >>>>>> #include <linux/linkage.h>
> >>>>>> #include <asm/thread_info.h>
> >>>>>> #include <asm/page.h>
> >>>>>> +#include <asm/pgtable.h>
> >>>>>> #include <asm/csr.h>
> >>>>>> #include <asm/hwcap.h>
> >>>>>> #include <asm/image.h>
> >>>>>> #include "efi-header.S"
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>> + REG_L t0, _xip_fixup
> >>>>>> + add \reg, \reg, t0
> >>>>>> +.endm
> >>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
> >>>>>> XIP_OFFSET
> >>>>>> +#else
> >>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>> +.endm
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> __HEAD
> >>>>>> ENTRY(_start)
> >>>>>> /*
> >>>>>> @@ -69,7 +81,11 @@ pe_head_start:
> >>>>>> #ifdef CONFIG_MMU
> >>>>>> relocate:
> >>>>>> /* Relocate return address */
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>> +#else
> >>>>>> li a1, PAGE_OFFSET
> >>>>>> +#endif
> >>>>>> la a2, _start
> >>>>>> sub a1, a1, a2
> >>>>>> add ra, ra, a1
> >>>>>> @@ -91,6 +107,7 @@ relocate:
> >>>>>> * to ensure the new translations are in use.
> >>>>>> */
> >>>>>> la a0, trampoline_pg_dir
> >>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>> srl a0, a0, PAGE_SHIFT
> >>>>>> or a0, a0, a1
> >>>>>> sfence.vma
> >>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
> >>>>>>
> >>>>>> slli a3, a0, LGREG
> >>>>>> la a4, __cpu_up_stack_pointer
> >>>>>> + XIP_FIXUP_OFFSET a4
> >>>>>> la a5, __cpu_up_task_pointer
> >>>>>> + XIP_FIXUP_OFFSET a5
> >>>>>> add a4, a3, a4
> >>>>>> add a5, a3, a5
> >>>>>> REG_L sp, (a4)
> >>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
> >>>>>> #ifdef CONFIG_MMU
> >>>>>> /* Enable virtual memory and relocate to virtual address */
> >>>>>> la a0, swapper_pg_dir
> >>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>> call relocate
> >>>>>> #endif
> >>>>>> call setup_trap_vector
> >>>>>> @@ -236,12 +256,33 @@ pmp_done:
> >>>>>> .Lgood_cores:
> >>>>>> #endif
> >>>>>>
> >>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>> /* Pick one hart to run the main boot sequence */
> >>>>>> la a3, hart_lottery
> >>>>>> li a2, 1
> >>>>>> amoadd.w a3, a2, (a3)
> >>>>>> bnez a3, .Lsecondary_start
> >>>>>>
> >>>>>> +#else
> >>>>>> + /* hart_lottery in flash contains a magic number */
> >>>>>> + la a3, hart_lottery
> >>>>>> + mv a2, a3
> >>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>> + lw t1, (a3)
> >>>>>> + amoswap.w t0, t1, (a2)
> >>>>>> + /* first time here if hart_lottery in RAM is not set */
> >>>>>> + beq t0, t1, .Lsecondary_start
> >>>>>> +
> >>>>>> + la sp, _end + THREAD_SIZE
> >>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>> + mv s0, a0
> >>>>>> + call __copy_data
> >>>>>> +
> >>>>>> + /* Restore a0 copy */
> >>>>>> + mv a0, s0
> >>>>>> +#endif
> >>>>>> +
> >>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>> /* Clear BSS for flat non-ELF images */
> >>>>>> la a3, __bss_start
> >>>>>> la a4, __bss_stop
> >>>>>> @@ -251,15 +292,18 @@ clear_bss:
> >>>>>> add a3, a3, RISCV_SZPTR
> >>>>>> blt a3, a4, clear_bss
> >>>>>> clear_bss_done:
> >>>>>> -
> >>>>>> +#endif
> >>>>>> /* Save hart ID and DTB physical address */
> >>>>>> mv s0, a0
> >>>>>> mv s1, a1
> >>>>>> +
> >>>>>> la a2, boot_cpu_hartid
> >>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>> REG_S a0, (a2)
> >>>>>>
> >>>>>> /* Initialize page tables and relocate to virtual addresses */
> >>>>>> la sp, init_thread_union + THREAD_SIZE
> >>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>> #ifdef CONFIG_BUILTIN_DTB
> >>>>>> la a0, __dtb_start
> >>>>>> #else
> >>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
> >>>>>> call setup_vm
> >>>>>> #ifdef CONFIG_MMU
> >>>>>> la a0, early_pg_dir
> >>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>> call relocate
> >>>>>> #endif /* CONFIG_MMU */
> >>>>>>
> >>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
> >>>>>>
> >>>>>> slli a3, a0, LGREG
> >>>>>> la a1, __cpu_up_stack_pointer
> >>>>>> + XIP_FIXUP_OFFSET a1
> >>>>>> la a2, __cpu_up_task_pointer
> >>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>> add a1, a3, a1
> >>>>>> add a2, a3, a2
> >>>>>>
> >>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> >>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
> >>>>>> --- a/arch/riscv/kernel/head.h
> >>>>>> +++ b/arch/riscv/kernel/head.h
> >>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> >>>>>>
> >>>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
> >>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +asmlinkage void __init __copy_data(void);
> >>>>>> +#endif
> >>>>>>
> >>>>>> extern void *__cpu_up_stack_pointer[];
> >>>>>> extern void *__cpu_up_task_pointer[];
> >>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> >>>>>> index e85bacff1b50..a0384c72c272 100644
> >>>>>> --- a/arch/riscv/kernel/setup.c
> >>>>>> +++ b/arch/riscv/kernel/setup.c
> >>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
> >>>>>> __section(".data") = {
> >>>>>> * This is used before the kernel initializes the BSS so it
> >>>>>> can't be in the
> >>>>>> * BSS.
> >>>>>> */
> >>>>>> -atomic_t hart_lottery __section(".sdata");
> >>>>>> +atomic_t hart_lottery __section(".sdata")
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> += ATOMIC_INIT(0xC001BEEF)
> >>>>>> +#endif
> >>>>>> +;
> >>>>>> unsigned long boot_cpu_hartid;
> >>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
> >>>>>>
> >>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> >>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> >>>>>> unflatten_and_copy_device_tree();
> >>>>>> #else
> >>>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
> >>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> >>>>>> unflatten_device_tree();
> >>>>>> else
> >>>>>> pr_err("No DTB found in kernel mappings\n");
> >>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>> new file mode 100644
> >>>>>> index 000000000000..9f0f08c34cd3
> >>>>>> --- /dev/null
> >>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>> @@ -0,0 +1,132 @@
> >>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
> >>>>>> +/*
> >>>>>> + * Copyright (C) 2012 Regents of the University of California
> >>>>>> + * Copyright (C) 2017 SiFive
> >>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> >>>>>> + */
> >>>>>> +
> >>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>> +/* No __ro_after_init data in the .rodata section - which will
> >>>>>> always be ro */
> >>>>>> +#define RO_AFTER_INIT_DATA
> >>>>>> +
> >>>>>> +#include <asm/vmlinux.lds.h>
> >>>>>> +#include <asm/page.h>
> >>>>>> +#include <asm/pgtable.h>
> >>>>>> +#include <asm/cache.h>
> >>>>>> +#include <asm/thread_info.h>
> >>>>>> +
> >>>>>> +OUTPUT_ARCH(riscv)
> >>>>>> +ENTRY(_start)
> >>>>>> +
> >>>>>> +jiffies = jiffies_64;
> >>>>>> +
> >>>>>> +SECTIONS
> >>>>>> +{
> >>>>>> + /* Beginning of code and text segment */
> >>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> >>>>>> + _xiprom = .;
> >>>>>> + _start = .;
> >>>>>> + HEAD_TEXT_SECTION
> >>>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
> >>>>>> + /* we have to discard exit text and such at runtime, not
> >>>>>> link time */
> >>>>>> + .exit.text :
> >>>>>> + {
> >>>>>> + EXIT_TEXT
> >>>>>> + }
> >>>>>> +
> >>>>>> + .text : {
> >>>>>> + _text = .;
> >>>>>> + _stext = .;
> >>>>>> + TEXT_TEXT
> >>>>>> + SCHED_TEXT
> >>>>>> + CPUIDLE_TEXT
> >>>>>> + LOCK_TEXT
> >>>>>> + KPROBES_TEXT
> >>>>>> + ENTRY_TEXT
> >>>>>> + IRQENTRY_TEXT
> >>>>>> + SOFTIRQENTRY_TEXT
> >>>>>> + *(.fixup)
> >>>>>> + _etext = .;
> >>>>>> + }
> >>>>>> + RO_DATA(L1_CACHE_BYTES)
> >>>>>> + .srodata : {
> >>>>>> + *(.srodata*)
> >>>>>> + }
> >>>>>> + .init.rodata : {
> >>>>>> + INIT_SETUP(16)
> >>>>>> + INIT_CALLS
> >>>>>> + CON_INITCALL
> >>>>>> + INIT_RAM_FS
> >>>>>> + }
> >>>>>> + _exiprom = .; /* End of XIP ROM area */
> >>>>>> +
> >>>>>> +
> >>>>>> +/*
> >>>>>> + * From this point, stuff is considered writable and will be
> >>>>>> copied to RAM
> >>>>>> + */
> >>>>>> + __data_loc = ALIGN(16); /* location in file */
> >>>>>> + . = PAGE_OFFSET; /* location in memory */
> >>>>>> +
> >>>>>> + _sdata = .; /* Start of data section */
> >>>>>> + _data = .;
> >>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> >>>>>> + _edata = .;
> >>>>>> + __start_ro_after_init = .;
> >>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
> >>>>>> LOAD_OFFSET) {
> >>>>>> + *(.data..ro_after_init)
> >>>>>> + }
> >>>>>> + __end_ro_after_init = .;
> >>>>>> +
> >>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>> + __init_begin = .;
> >>>>>> + .init.data : {
> >>>>>> + INIT_DATA
> >>>>>> + }
> >>>>>> + .exit.data : {
> >>>>>> + EXIT_DATA
> >>>>>> + }
> >>>>>> + . = ALIGN(8);
> >>>>>> + __soc_early_init_table : {
> >>>>>> + __soc_early_init_table_start = .;
> >>>>>> + KEEP(*(__soc_early_init_table))
> >>>>>> + __soc_early_init_table_end = .;
> >>>>>> + }
> >>>>>> + __soc_builtin_dtb_table : {
> >>>>>> + __soc_builtin_dtb_table_start = .;
> >>>>>> + KEEP(*(__soc_builtin_dtb_table))
> >>>>>> + __soc_builtin_dtb_table_end = .;
> >>>>>> + }
> >>>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
> >>>>>> +
> >>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>> + __init_end = .;
> >>>>>> +
> >>>>>> + .sdata : {
> >>>>>> + __global_pointer$ = . + 0x800;
> >>>>>> + *(.sdata*)
> >>>>>> + *(.sbss*)
> >>>>>> + }
> >>>>>> +
> >>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> >>>>>> + EXCEPTION_TABLE(0x10)
> >>>>>> +
> >>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> >>>>>> + *(.rel.dyn*)
> >>>>>> + }
> >>>>>> +
> >>>>>> + /*
> >>>>>> + * End of copied data. We need a dummy section to get its LMA.
> >>>>>> + * Also located before final ALIGN() as trailing padding is
> >>>>>> not stored
> >>>>>> + * in the resulting binary file and useless to copy.
> >>>>>> + */
> >>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> >>>>>> + _edata_loc = LOADADDR(.data.endmark);
> >>>>>> +
> >>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>> + _end = .;
> >>>>>> +
> >>>>>> + STABS_DEBUG
> >>>>>> + DWARF_DEBUG
> >>>>>> +
> >>>>>> + DISCARDS
> >>>>>> +}
> >>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>> b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>> index de03cb22d0e9..6745ec325930 100644
> >>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>> @@ -4,7 +4,12 @@
> >>>>>> * Copyright (C) 2017 SiFive
> >>>>>> */
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#include "vmlinux-xip.lds.S"
> >>>>>> +#else
> >>>>>> +
> >>>>>> #define LOAD_OFFSET PAGE_OFFSET
> >>>>>> +
> >>>>>> #include <asm/vmlinux.lds.h>
> >>>>>> #include <asm/page.h>
> >>>>>> #include <asm/cache.h>
> >>>>>> @@ -132,3 +137,4 @@ SECTIONS
> >>>>>>
> >>>>>> DISCARDS
> >>>>>> }
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> >>>>>> index 7f5036fbee8c..efe649d41f95 100644
> >>>>>> --- a/arch/riscv/mm/init.c
> >>>>>> +++ b/arch/riscv/mm/init.c
> >>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >>>>>>
> >>>>>> extern char _start[];
> >>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> >>>>>> -void *dtb_early_va __initdata;
> >>>>>> -uintptr_t dtb_early_pa __initdata;
> >>>>>> +void *_dtb_early_va __initdata;
> >>>>>> +uintptr_t _dtb_early_pa __initdata;
> >>>>>>
> >>>>>> struct pt_alloc_ops {
> >>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
> >>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> >>>>>> (unsigned long)VMALLOC_END);
> >>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> >>>>>> (unsigned long)high_memory);
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> >>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> }
> >>>>>> #else
> >>>>>> static void print_vm_layout(void) { }
> >>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> >>>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
> >>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + vmlinux_start = __pa_symbol(&_sdata);
> >>>>>> +#endif
> >>>>>> +
> >>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
> >>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
> >>>>>>
> >>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> >>>>>> memblock_allow_resize();
> >>>>>> }
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +
> >>>>>> +extern char _xiprom[], _exiprom[];
> >>>>>> +extern char _sdata[], _edata[];
> >>>>>> +
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> #ifdef CONFIG_MMU
> >>>>>> -static struct pt_alloc_ops pt_ops;
> >>>>>> +static struct pt_alloc_ops _pt_ops;
> >>>>>> +
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> >>>>>> +#else
> >>>>>> +#define pt_ops _pt_ops
> >>>>>> +#endif
> >>>>>>
> >>>>>> unsigned long va_pa_offset;
> >>>>>> EXPORT_SYMBOL(va_pa_offset);
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
> >>>>>> +#endif
> >>>>>> unsigned long pfn_base;
> >>>>>> EXPORT_SYMBOL(pfn_base);
> >>>>>>
> >>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
> >>>>>> __page_aligned_bss;
> >>>>>>
> >>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
> >>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> >>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
> >>>>>> pgprot_t prot)
> >>>>>> {
> >>>>>> unsigned long addr = __fix_to_virt(idx);
> >>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
> >>>>>> __page_aligned_bss;
> >>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> >>>>>> +
> >>>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> >>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> >>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> >>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> >>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>> +
> >>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> >>>>>> {
> >>>>>> /* Before MMU is enabled */
> >>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
> >>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>> return PMD_SIZE;
> >>>>>> }
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> +/* called from head.S with MMU off */
> >>>>>> +asmlinkage void __init __copy_data(void)
> >>>>>> +{
> >>>>>> + void *from = (void *)(&_sdata);
> >>>>>> + void *end = (void *)(&_end);
> >>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> >>>>>> + size_t sz = (size_t)(end - from);
> >>>>>> +
> >>>>>> + memcpy(to, from, sz);
> >>>>>> +}
> >>>>>> +#endif
> >>>>>> +
> >>>>>> /*
> >>>>>> * setup_vm() is called from head.S with MMU-off.
> >>>>>> *
> >>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
> >>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>>
> >>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>>>>> {
> >>>>>> - uintptr_t va, pa, end_va;
> >>>>>> + uintptr_t va, end_va;
> >>>>>> + uintptr_t __maybe_unused pa;
> >>>>>> uintptr_t load_pa = (uintptr_t)(&_start);
> >>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> >>>>>> uintptr_t map_size;
> >>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>> dtb_pa)
> >>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> >>>>>> #endif
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> >>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>> (uintptr_t)(&_xiprom);
> >>>>>> +
> >>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> >>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> >>>>>> +#endif
> >>>>>> va_pa_offset = PAGE_OFFSET - load_pa;
> >>>
> >>> I should have seen this before, I was too focused on having a XIP kernel
> >>> boot. I already moved the kernel mapping in the vmalloc zone: the
> >>> virtual to physical translations need to be handled differently now that
> >>> the kernel mapping does not lie into linear mapping anymore, we can't
> >>> use va_pa_offset defined above for both mappings.
> >>>
> >>> I was rebasing my patchset on the XIP patch but I believe that doing the
> >>> other way around would greatly simplify the XIP patch as the kernel
> >>> mapping would already be moved outside the linear mapping, there would
> >>> be no need to reserve a zone in vmalloc anymore (that simplifies
> >>> pgtable.h quite a lot). And the XIP kernel mapping could be implemented
> >>> in a new create_kernel_page_table (that would also simplify mm/init.c).
> >>>
> >>> I can help to do that but I don't think we should merge this patch as is
> >>> now.
> >>
> >> I think that's the right way to go for now: it's a lot harder to test
> >> the XIP stuff, as it requires a bunch of harness changes. So let's
> >> take the page table refactoring in now and rebase this stuff on top of
> >> it. There's really no way to do both without making more work for
> >> someone, it's just a headache on timing.
> >>
> >> Alex: if you want to sign up to spend some time there that'd be great,
> >> otherwise I will.
> >
> > I can take care of that, no problem.
>
> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my setup.
>
> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
> any other kernel at the end of the address space, not in the vmalloc
> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
> pfn_valid, copy_data and other stuff).
>
> Any comment is welcome !
thanks for your efforts!
I've just built your version. The build went well, but the image
doesn't seem to boot for me.
I'll take a look at the code later today.
Best regards,
Vitaly
> Thanks,
>
> Alex
>
> >
> >> Either way, can you point me (either just indicate the old version is
> >> OK or send a new one) to what you want me to look at WRT the page
> >> table code? IIRC it looked pretty much fine, but I'll take another
> >> look ASAP so we can avoid serializing everything.
> >
> > The v3 is fine for me:
> > https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
> >
> >>
> >>>
> >>> Alex
> >>>
> >>>>>> pfn_base = PFN_DOWN(load_pa);
> >>>>>>
> >>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>> dtb_pa)
> >>>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> >>>>>> #endif
> >>>>>>
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> >>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>> + va += PMD_SIZE) {
> >>>>>> + create_pmd_mapping(xip_pmd, va,
> >>>>>> + xiprom + (va - XIP_VIRT_ADDR_START),
> >>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
> >>>>>> + }
> >>>>>> +
> >>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> >>>>>> +#endif
> >>>>>> +
> >>>>>> /*
> >>>>>> * Setup early PGD covering entire kernel which will allows
> >>>>>> * us to reach paging_init(). We map all memory banks later
> >>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> >>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>> (PMD_SIZE - 1));
> >>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>> #else
> >>>>>> #ifndef CONFIG_BUILTIN_DTB
> >>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>>>>> pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
> >>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>> (PGDIR_SIZE - 1));
> >>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>> #endif
> >>>>>> dtb_early_pa = dtb_pa;
> >>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> >>>>>> uintptr_t va, map_size;
> >>>>>> phys_addr_t pa, start, end;
> >>>>>> u64 i;
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>> (uintptr_t)(&_xiprom);
> >>>>>> +#endif
> >>>>>>
> >>>>>> /**
> >>>>>> * MMU is enabled at this point. But page table setup is
> >>>>>> not complete yet.
> >>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> >>>>>> map_size,
> >>>>>> PAGE_KERNEL_EXEC);
> >>>>>> }
> >>>>>> }
> >>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> >>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>> + va += map_size)
> >>>>>> + create_pgd_mapping(swapper_pg_dir, va,
> >>>>>> + CONFIG_XIP_PHYS_ADDR + (va -
> >>>>>> XIP_VIRT_ADDR_START),
> >>>>>> + map_size, PAGE_KERNEL_EXEC);
> >>>>>> +
> >>>>>> +#endif
> >>>>>>
> >>>>>> /* Clear fixmap PTE and PMD mappings */
> >>>>>> clear_fixmap(FIX_PTE);
> >>>>
> >>>> _______________________________________________
> >>>> linux-riscv mailing list
> >>>> [email protected]
> >>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>
> >>
> >> _______________________________________________
> >> linux-riscv mailing list
> >> [email protected]
> >> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >
> > _______________________________________________
> > linux-riscv mailing list
> > [email protected]
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
Le 4/1/21 à 4:52 AM, Vitaly Wool a écrit :
> Hi Alex,
>
> On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <[email protected]> wrote:
>>
>> Hi,
>>
>> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
>>> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
>>>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
>>>>>
>>>>>
>>>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
>>>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
>>>>>> <[email protected]> wrote:
>>>>>>>
>>>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
>>>>>>> wrote:
>>>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
>>>>>>>> It allows code to be executed directly from non-volatile storage
>>>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
>>>>>>>> be found on many RISC-V platforms. This makes way for significant
>>>>>>>> optimization of RAM footprint. The XIP kernel is not compressed
>>>>>>>> since it has to run directly from flash, so it will occupy more
>>>>>>>> space on the non-volatile storage. The physical flash address used
>>>>>>>> to link the kernel object files and for storing it has to be known
>>>>>>>> at compile time and is represented by a Kconfig option.
>>>>>>>>
>>>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
>>>>>>>> kernels.
>>>>>>>>
>>>>>>>> Signed-off-by: Vitaly Wool <[email protected]>
>>>>>>>>
>>>>>>>> ---
>>>>>>>>
>>>>>>>> Changes in v2:
>>>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled yet
>>>>>>>> o both for 32-bit and 64-bit RISC-V
>>>>>>>> - SP is explicitly set to a safe place in RAM before __copy_data call
>>>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
>>>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>>>>>>>> Changes in v3:
>>>>>>>> - rebased against latest for-next
>>>>>>>> - XIP address fixup macro now takes an argument
>>>>>>>> - SMP related fixes
>>>>>>>> Changes in v4:
>>>>>>>> - rebased against the current for-next
>>>>>>>> - less #ifdef's in C/ASM code
>>>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
>>>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
>>>>>>>> - Fixed multi-core boot
>>>>>>>> Changes in v5:
>>>>>>>> - fixed build error for non-XIP kernels
>>>>>>>> Changes in v6:
>>>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
>>>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
>>>>>>>> PHYS_RAM_BASE in non-XIP configurations if needed
>>>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid side
>>>>>>>> effects
>>>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
>>>>>>>
>>>>>>> So v5 landed on for-next, which generally means it's best to avoid
>>>>>>> re-spinning the patch and instead send along fixups. That said,
>>>>>>> the v5
>>>>>>> is causing some testing failures for me.
>>>>>>>
>>>>>>> I'm going to drop the v5 for now as I don't have time to test this
>>>>>>> tonight. I'll try and take a look soon, as it will conflict with
>>>>>>> Alex's
>>>>>>> patches.
>>>>>>
>>>>>> I can come up with the incremental patch instead pretty much straight
>>>>>> away if that works better.
>>>>>>
>>>>>> ~Vitaly
>>>>>>
>>>>>>>> arch/riscv/Kconfig | 49 ++++++++++-
>>>>>>>> arch/riscv/Makefile | 8 +-
>>>>>>>> arch/riscv/boot/Makefile | 13 +++
>>>>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
>>>>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
>>>>>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
>>>>>>>> arch/riscv/kernel/head.h | 3 +
>>>>>>>> arch/riscv/kernel/setup.c | 8 +-
>>>>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132
>>>>>>>> ++++++++++++++++++++++++++++
>>>>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
>>>>>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
>>>>>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
>>>>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>
>>>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>>>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
>>>>>>>> --- a/arch/riscv/Kconfig
>>>>>>>> +++ b/arch/riscv/Kconfig
>>>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
>>>>>>>>
>>>>>>>> config EFI
>>>>>>>> bool "UEFI runtime support"
>>>>>>>> - depends on OF
>>>>>>>> + depends on OF && !XIP_KERNEL
>>>>>>>> select LIBFDT
>>>>>>>> select UCS2_STRING
>>>>>>>> select EFI_PARAMS_FROM_FDT
>>>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
>>>>>>>> def_bool y
>>>>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>>>>>>>>
>>>>>>>> +config PHYS_RAM_BASE_FIXED
>>>>>>>> + bool "Explicitly specified physical RAM address"
>>>>>>>> + default n
>>>>>>>> +
>>>>>>>> +config PHYS_RAM_BASE
>>>>>>>> + hex "Platform Physical RAM address"
>>>>>>>> + depends on PHYS_RAM_BASE_FIXED
>>>>>>>> + default "0x80000000"
>>>>>>>> + help
>>>>>>>> + This is the physical address of RAM in the system. It has
>>>>>>>> to be
>>>>>>>> + explicitly specified to run early relocations of
>>>>>>>> read-write data
>>>>>>>> + from flash to RAM.
>>>>>>>> +
>>>>>>>> +config XIP_KERNEL
>>>>>>>> + bool "Kernel Execute-In-Place from ROM"
>>>>>>>> + depends on MMU
>>>>>>>> + select PHYS_RAM_BASE_FIXED
>>>>>>>> + help
>>>>>>>> + Execute-In-Place allows the kernel to run from
>>>>>>>> non-volatile storage
>>>>>>>> + directly addressable by the CPU, such as NOR flash. This
>>>>>>>> saves RAM
>>>>>>>> + space since the text section of the kernel is not loaded
>>>>>>>> from flash
>>>>>>>> + to RAM. Read-write sections, such as the data section and
>>>>>>>> stack,
>>>>>>>> + are still copied to RAM. The XIP kernel is not compressed
>>>>>>>> since
>>>>>>>> + it has to run directly from flash, so it will take more
>>>>>>>> space to
>>>>>>>> + store it. The flash address used to link the kernel
>>>>>>>> object files,
>>>>>>>> + and for storing it, is configuration dependent. Therefore,
>>>>>>>> if you
>>>>>>>> + say Y here, you must know the proper physical address
>>>>>>>> where to
>>>>>>>> + store the kernel image depending on your own flash memory
>>>>>>>> usage.
>>>>>>>> +
>>>>>>>> + Also note that the make target becomes "make xipImage"
>>>>>>>> rather than
>>>>>>>> + "make zImage" or "make Image". The final kernel binary to
>>>>>>>> put in
>>>>>>>> + ROM memory will be arch/riscv/boot/xipImage.
>>>>>>>> +
>>>>>>>> + If unsure, say N.
>>>>>>>> +
>>>>>>>> +config XIP_PHYS_ADDR
>>>>>>>> + hex "XIP Kernel Physical Location"
>>>>>>>> + depends on XIP_KERNEL
>>>>>>>> + default "0x21000000"
>>>>>>>> + help
>>>>>>>> + This is the physical address in your flash memory the
>>>>>>>> kernel will
>>>>>>>> + be linked for and stored to. This address is dependent on
>>>>>>>> your
>>>>>>>> + own flash usage.
>>>>>>>> +
>>>>>>>> endmenu
>>>>>>>>
>>>>>>>> config BUILTIN_DTB
>>>>>>>> - def_bool n
>>>>>>>> + bool
>>>>>>>> depends on OF
>>>>>>>> + default y if XIP_KERNEL
>>>>>>>>
>>>>>>>> menu "Power management options"
>>>>>>>>
>>>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
>>>>>>>> index 1368d943f1f3..8fcbec03974d 100644
>>>>>>>> --- a/arch/riscv/Makefile
>>>>>>>> +++ b/arch/riscv/Makefile
>>>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>>>>>>>>
>>>>>>>> # Default target when executing plain make
>>>>>>>> boot := arch/riscv/boot
>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>> +KBUILD_IMAGE := $(boot)/xipImage
>>>>>>>> +else
>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
>>>>>>>> +endif
>>>>>>>>
>>>>>>>> head-y := arch/riscv/kernel/head.o
>>>>>>>>
>>>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
>>>>>>>> vdso_install:
>>>>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>>>>>>>>
>>>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
>>>>>>>> KBUILD_IMAGE := $(boot)/loader.bin
>>>>>>>> else
>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
>>>>>>>> endif
>>>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
>>>>>>>> +endif
>>>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>>>>>>>>
>>>>>>>> all: $(notdir $(KBUILD_IMAGE))
>>>>>>>>
>>>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
>>>>>>>> index 03404c84f971..6bf299f70c27 100644
>>>>>>>> --- a/arch/riscv/boot/Makefile
>>>>>>>> +++ b/arch/riscv/boot/Makefile
>>>>>>>> @@ -17,8 +17,21 @@
>>>>>>>> KCOV_INSTRUMENT := n
>>>>>>>>
>>>>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R
>>>>>>>> .comment -S
>>>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
>>>>>>>> -R .comment -S
>>>>>>>>
>>>>>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>>>> xipImage
>>>>>>>> +
>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>> +
>>>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
>>>>>>>> +cmd_mkxip = $(cmd_objcopy)
>>>>>>>> +
>>>>>>>> +$(obj)/xipImage: vmlinux FORCE
>>>>>>>> + $(call if_changed,mkxip)
>>>>>>>> + @$(kecho) ' Physical Address of xipImage:
>>>>>>>> $(CONFIG_XIP_PHYS_ADDR)'
>>>>>>>> +
>>>>>>>> +endif
>>>>>>>>
>>>>>>>> $(obj)/Image: vmlinux FORCE
>>>>>>>> $(call if_changed,objcopy)
>>>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
>>>>>>>> b/arch/riscv/include/asm/pgtable.h
>>>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
>>>>>>>> --- a/arch/riscv/include/asm/pgtable.h
>>>>>>>> +++ b/arch/riscv/include/asm/pgtable.h
>>>>>>>> @@ -11,6 +11,33 @@
>>>>>>>>
>>>>>>>> #include <asm/pgtable-bits.h>
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_MMU
>>>>>>>> +
>>>>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>>>> +
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
>>>>>>>> +
>>>>>>>> +#define XIP_OFFSET SZ_8M
>>>>>>>> +#define XIP_MASK (SZ_8M - 1)
>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) \
>>>>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
>>>>>>>> +
>>>>>>>> +#else
>>>>>>>> +
>>>>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
>>>>>>>> +
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>> +
>>>>>>>> +#else
>>>>>>>> +
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>> +#endif /* CONFIG_MMU */
>>>>>>>> +
>>>>>>>> #ifndef __ASSEMBLY__
>>>>>>>>
>>>>>>>> /* Page Upper Directory not used in RISC-V */
>>>>>>>> @@ -21,9 +48,25 @@
>>>>>>>>
>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>
>>>>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>>>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
>>>>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +/*
>>>>>>>> + * Since we use sections to map it, this macro replaces the
>>>>>>>> physical address
>>>>>>>> + * with its virtual address while keeping offset from the base
>>>>>>>> section.
>>>>>>>> + */
>>>>>>>> +#define XIP_PHYS_ADDR(va) \
>>>>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
>>>>>>>> CONFIG_XIP_PHYS_ADDR)
>>>>>>>> +
>>>>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>> +
>>>>>>>> +#define XIP_FIXUP(addr) ({ \
>>>>>>>> + uintptr_t __a = (uintptr_t)(addr); \
>>>>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
>>>>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
>>>>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
>>>>>>>> XIP_OFFSET : __a; \
>>>>>>>> +})
>>>>>>>> +#else
>>>>>>>> +#define XIP_FIXUP(addr) (addr)
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>
>>>>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
>>>>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
>>>>>>>> @@ -484,8 +527,20 @@ static inline int
>>>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
>>>>>>>>
>>>>>>>> #define kern_addr_valid(addr) (1) /* FIXME */
>>>>>>>>
>>>>>>>> -extern void *dtb_early_va;
>>>>>>>> -extern uintptr_t dtb_early_pa;
>>>>>>>> +extern void *_dtb_early_va;
>>>>>>>> +extern uintptr_t _dtb_early_pa;
>>>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
>>>>>>>> +
>>>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
>>>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
>>>>>>>> +
>>>>>>>> +#else
>>>>>>>> +
>>>>>>>> +#define dtb_early_va _dtb_early_va
>>>>>>>> +#define dtb_early_pa _dtb_early_pa
>>>>>>>> +
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>> +
>>>>>>>> void setup_bootmem(void);
>>>>>>>> void paging_init(void);
>>>>>>>> void misc_mem_init(void);
>>>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>> index 685fae72b7f5..2413c2997350 100644
>>>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
>>>>>>>> long hartid)
>>>>>>>> }
>>>>>>>> #endif
>>>>>>>>
>>>>>>>> +static inline unsigned long get_secondary_start_phys(void)
>>>>>>>> +{
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
>>>>>>>> +#else
>>>>>>>> + return __pa_symbol(secondary_start_sbi);
>>>>>>>> +#endif
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct
>>>>>>>> *tidle)
>>>>>>>> {
>>>>>>>> int rc;
>>>>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
>>>>>>>> + unsigned long boot_addr = get_secondary_start_phys();
>>>>>>>> int hartid = cpuid_to_hartid_map(cpuid);
>>>>>>>>
>>>>>>>> cpu_update_secondary_bootdata(cpuid, tidle);
>>>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>>>>>>>> index f5a9bad86e58..bbe74e37914f 100644
>>>>>>>> --- a/arch/riscv/kernel/head.S
>>>>>>>> +++ b/arch/riscv/kernel/head.S
>>>>>>>> @@ -9,11 +9,23 @@
>>>>>>>> #include <linux/linkage.h>
>>>>>>>> #include <asm/thread_info.h>
>>>>>>>> #include <asm/page.h>
>>>>>>>> +#include <asm/pgtable.h>
>>>>>>>> #include <asm/csr.h>
>>>>>>>> #include <asm/hwcap.h>
>>>>>>>> #include <asm/image.h>
>>>>>>>> #include "efi-header.S"
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>>>> + REG_L t0, _xip_fixup
>>>>>>>> + add \reg, \reg, t0
>>>>>>>> +.endm
>>>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
>>>>>>>> XIP_OFFSET
>>>>>>>> +#else
>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>>>> +.endm
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>> +
>>>>>>>> __HEAD
>>>>>>>> ENTRY(_start)
>>>>>>>> /*
>>>>>>>> @@ -69,7 +81,11 @@ pe_head_start:
>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>> relocate:
>>>>>>>> /* Relocate return address */
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>> +#else
>>>>>>>> li a1, PAGE_OFFSET
>>>>>>>> +#endif
>>>>>>>> la a2, _start
>>>>>>>> sub a1, a1, a2
>>>>>>>> add ra, ra, a1
>>>>>>>> @@ -91,6 +107,7 @@ relocate:
>>>>>>>> * to ensure the new translations are in use.
>>>>>>>> */
>>>>>>>> la a0, trampoline_pg_dir
>>>>>>>> + XIP_FIXUP_OFFSET a0
>>>>>>>> srl a0, a0, PAGE_SHIFT
>>>>>>>> or a0, a0, a1
>>>>>>>> sfence.vma
>>>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
>>>>>>>>
>>>>>>>> slli a3, a0, LGREG
>>>>>>>> la a4, __cpu_up_stack_pointer
>>>>>>>> + XIP_FIXUP_OFFSET a4
>>>>>>>> la a5, __cpu_up_task_pointer
>>>>>>>> + XIP_FIXUP_OFFSET a5
>>>>>>>> add a4, a3, a4
>>>>>>>> add a5, a3, a5
>>>>>>>> REG_L sp, (a4)
>>>>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>> /* Enable virtual memory and relocate to virtual address */
>>>>>>>> la a0, swapper_pg_dir
>>>>>>>> + XIP_FIXUP_OFFSET a0
>>>>>>>> call relocate
>>>>>>>> #endif
>>>>>>>> call setup_trap_vector
>>>>>>>> @@ -236,12 +256,33 @@ pmp_done:
>>>>>>>> .Lgood_cores:
>>>>>>>> #endif
>>>>>>>>
>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>>>> /* Pick one hart to run the main boot sequence */
>>>>>>>> la a3, hart_lottery
>>>>>>>> li a2, 1
>>>>>>>> amoadd.w a3, a2, (a3)
>>>>>>>> bnez a3, .Lsecondary_start
>>>>>>>>
>>>>>>>> +#else
>>>>>>>> + /* hart_lottery in flash contains a magic number */
>>>>>>>> + la a3, hart_lottery
>>>>>>>> + mv a2, a3
>>>>>>>> + XIP_FIXUP_OFFSET a2
>>>>>>>> + lw t1, (a3)
>>>>>>>> + amoswap.w t0, t1, (a2)
>>>>>>>> + /* first time here if hart_lottery in RAM is not set */
>>>>>>>> + beq t0, t1, .Lsecondary_start
>>>>>>>> +
>>>>>>>> + la sp, _end + THREAD_SIZE
>>>>>>>> + XIP_FIXUP_OFFSET sp
>>>>>>>> + mv s0, a0
>>>>>>>> + call __copy_data
>>>>>>>> +
>>>>>>>> + /* Restore a0 copy */
>>>>>>>> + mv a0, s0
>>>>>>>> +#endif
>>>>>>>> +
>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>>>> /* Clear BSS for flat non-ELF images */
>>>>>>>> la a3, __bss_start
>>>>>>>> la a4, __bss_stop
>>>>>>>> @@ -251,15 +292,18 @@ clear_bss:
>>>>>>>> add a3, a3, RISCV_SZPTR
>>>>>>>> blt a3, a4, clear_bss
>>>>>>>> clear_bss_done:
>>>>>>>> -
>>>>>>>> +#endif
>>>>>>>> /* Save hart ID and DTB physical address */
>>>>>>>> mv s0, a0
>>>>>>>> mv s1, a1
>>>>>>>> +
>>>>>>>> la a2, boot_cpu_hartid
>>>>>>>> + XIP_FIXUP_OFFSET a2
>>>>>>>> REG_S a0, (a2)
>>>>>>>>
>>>>>>>> /* Initialize page tables and relocate to virtual addresses */
>>>>>>>> la sp, init_thread_union + THREAD_SIZE
>>>>>>>> + XIP_FIXUP_OFFSET sp
>>>>>>>> #ifdef CONFIG_BUILTIN_DTB
>>>>>>>> la a0, __dtb_start
>>>>>>>> #else
>>>>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
>>>>>>>> call setup_vm
>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>> la a0, early_pg_dir
>>>>>>>> + XIP_FIXUP_OFFSET a0
>>>>>>>> call relocate
>>>>>>>> #endif /* CONFIG_MMU */
>>>>>>>>
>>>>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
>>>>>>>>
>>>>>>>> slli a3, a0, LGREG
>>>>>>>> la a1, __cpu_up_stack_pointer
>>>>>>>> + XIP_FIXUP_OFFSET a1
>>>>>>>> la a2, __cpu_up_task_pointer
>>>>>>>> + XIP_FIXUP_OFFSET a2
>>>>>>>> add a1, a3, a1
>>>>>>>> add a2, a3, a2
>>>>>>>>
>>>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
>>>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
>>>>>>>> --- a/arch/riscv/kernel/head.h
>>>>>>>> +++ b/arch/riscv/kernel/head.h
>>>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>>>>>>>>
>>>>>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +asmlinkage void __init __copy_data(void);
>>>>>>>> +#endif
>>>>>>>>
>>>>>>>> extern void *__cpu_up_stack_pointer[];
>>>>>>>> extern void *__cpu_up_task_pointer[];
>>>>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>>>>>>>> index e85bacff1b50..a0384c72c272 100644
>>>>>>>> --- a/arch/riscv/kernel/setup.c
>>>>>>>> +++ b/arch/riscv/kernel/setup.c
>>>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
>>>>>>>> __section(".data") = {
>>>>>>>> * This is used before the kernel initializes the BSS so it
>>>>>>>> can't be in the
>>>>>>>> * BSS.
>>>>>>>> */
>>>>>>>> -atomic_t hart_lottery __section(".sdata");
>>>>>>>> +atomic_t hart_lottery __section(".sdata")
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> += ATOMIC_INIT(0xC001BEEF)
>>>>>>>> +#endif
>>>>>>>> +;
>>>>>>>> unsigned long boot_cpu_hartid;
>>>>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
>>>>>>>>
>>>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
>>>>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
>>>>>>>> unflatten_and_copy_device_tree();
>>>>>>>> #else
>>>>>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
>>>>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
>>>>>>>> unflatten_device_tree();
>>>>>>>> else
>>>>>>>> pr_err("No DTB found in kernel mappings\n");
>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>> new file mode 100644
>>>>>>>> index 000000000000..9f0f08c34cd3
>>>>>>>> --- /dev/null
>>>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>> @@ -0,0 +1,132 @@
>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>>>>>>> +/*
>>>>>>>> + * Copyright (C) 2012 Regents of the University of California
>>>>>>>> + * Copyright (C) 2017 SiFive
>>>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
>>>>>>>> + */
>>>>>>>> +
>>>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>> +/* No __ro_after_init data in the .rodata section - which will
>>>>>>>> always be ro */
>>>>>>>> +#define RO_AFTER_INIT_DATA
>>>>>>>> +
>>>>>>>> +#include <asm/vmlinux.lds.h>
>>>>>>>> +#include <asm/page.h>
>>>>>>>> +#include <asm/pgtable.h>
>>>>>>>> +#include <asm/cache.h>
>>>>>>>> +#include <asm/thread_info.h>
>>>>>>>> +
>>>>>>>> +OUTPUT_ARCH(riscv)
>>>>>>>> +ENTRY(_start)
>>>>>>>> +
>>>>>>>> +jiffies = jiffies_64;
>>>>>>>> +
>>>>>>>> +SECTIONS
>>>>>>>> +{
>>>>>>>> + /* Beginning of code and text segment */
>>>>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
>>>>>>>> + _xiprom = .;
>>>>>>>> + _start = .;
>>>>>>>> + HEAD_TEXT_SECTION
>>>>>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
>>>>>>>> + /* we have to discard exit text and such at runtime, not
>>>>>>>> link time */
>>>>>>>> + .exit.text :
>>>>>>>> + {
>>>>>>>> + EXIT_TEXT
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + .text : {
>>>>>>>> + _text = .;
>>>>>>>> + _stext = .;
>>>>>>>> + TEXT_TEXT
>>>>>>>> + SCHED_TEXT
>>>>>>>> + CPUIDLE_TEXT
>>>>>>>> + LOCK_TEXT
>>>>>>>> + KPROBES_TEXT
>>>>>>>> + ENTRY_TEXT
>>>>>>>> + IRQENTRY_TEXT
>>>>>>>> + SOFTIRQENTRY_TEXT
>>>>>>>> + *(.fixup)
>>>>>>>> + _etext = .;
>>>>>>>> + }
>>>>>>>> + RO_DATA(L1_CACHE_BYTES)
>>>>>>>> + .srodata : {
>>>>>>>> + *(.srodata*)
>>>>>>>> + }
>>>>>>>> + .init.rodata : {
>>>>>>>> + INIT_SETUP(16)
>>>>>>>> + INIT_CALLS
>>>>>>>> + CON_INITCALL
>>>>>>>> + INIT_RAM_FS
>>>>>>>> + }
>>>>>>>> + _exiprom = .; /* End of XIP ROM area */
>>>>>>>> +
>>>>>>>> +
>>>>>>>> +/*
>>>>>>>> + * From this point, stuff is considered writable and will be
>>>>>>>> copied to RAM
>>>>>>>> + */
>>>>>>>> + __data_loc = ALIGN(16); /* location in file */
>>>>>>>> + . = PAGE_OFFSET; /* location in memory */
>>>>>>>> +
>>>>>>>> + _sdata = .; /* Start of data section */
>>>>>>>> + _data = .;
>>>>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
>>>>>>>> + _edata = .;
>>>>>>>> + __start_ro_after_init = .;
>>>>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
>>>>>>>> LOAD_OFFSET) {
>>>>>>>> + *(.data..ro_after_init)
>>>>>>>> + }
>>>>>>>> + __end_ro_after_init = .;
>>>>>>>> +
>>>>>>>> + . = ALIGN(PAGE_SIZE);
>>>>>>>> + __init_begin = .;
>>>>>>>> + .init.data : {
>>>>>>>> + INIT_DATA
>>>>>>>> + }
>>>>>>>> + .exit.data : {
>>>>>>>> + EXIT_DATA
>>>>>>>> + }
>>>>>>>> + . = ALIGN(8);
>>>>>>>> + __soc_early_init_table : {
>>>>>>>> + __soc_early_init_table_start = .;
>>>>>>>> + KEEP(*(__soc_early_init_table))
>>>>>>>> + __soc_early_init_table_end = .;
>>>>>>>> + }
>>>>>>>> + __soc_builtin_dtb_table : {
>>>>>>>> + __soc_builtin_dtb_table_start = .;
>>>>>>>> + KEEP(*(__soc_builtin_dtb_table))
>>>>>>>> + __soc_builtin_dtb_table_end = .;
>>>>>>>> + }
>>>>>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
>>>>>>>> +
>>>>>>>> + . = ALIGN(PAGE_SIZE);
>>>>>>>> + __init_end = .;
>>>>>>>> +
>>>>>>>> + .sdata : {
>>>>>>>> + __global_pointer$ = . + 0x800;
>>>>>>>> + *(.sdata*)
>>>>>>>> + *(.sbss*)
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>>>>>>>> + EXCEPTION_TABLE(0x10)
>>>>>>>> +
>>>>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
>>>>>>>> + *(.rel.dyn*)
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + /*
>>>>>>>> + * End of copied data. We need a dummy section to get its LMA.
>>>>>>>> + * Also located before final ALIGN() as trailing padding is
>>>>>>>> not stored
>>>>>>>> + * in the resulting binary file and useless to copy.
>>>>>>>> + */
>>>>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
>>>>>>>> + _edata_loc = LOADADDR(.data.endmark);
>>>>>>>> +
>>>>>>>> + . = ALIGN(PAGE_SIZE);
>>>>>>>> + _end = .;
>>>>>>>> +
>>>>>>>> + STABS_DEBUG
>>>>>>>> + DWARF_DEBUG
>>>>>>>> +
>>>>>>>> + DISCARDS
>>>>>>>> +}
>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>> b/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>> index de03cb22d0e9..6745ec325930 100644
>>>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>> @@ -4,7 +4,12 @@
>>>>>>>> * Copyright (C) 2017 SiFive
>>>>>>>> */
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +#include "vmlinux-xip.lds.S"
>>>>>>>> +#else
>>>>>>>> +
>>>>>>>> #define LOAD_OFFSET PAGE_OFFSET
>>>>>>>> +
>>>>>>>> #include <asm/vmlinux.lds.h>
>>>>>>>> #include <asm/page.h>
>>>>>>>> #include <asm/cache.h>
>>>>>>>> @@ -132,3 +137,4 @@ SECTIONS
>>>>>>>>
>>>>>>>> DISCARDS
>>>>>>>> }
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
>>>>>>>> index 7f5036fbee8c..efe649d41f95 100644
>>>>>>>> --- a/arch/riscv/mm/init.c
>>>>>>>> +++ b/arch/riscv/mm/init.c
>>>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>>>>>>>>
>>>>>>>> extern char _start[];
>>>>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
>>>>>>>> -void *dtb_early_va __initdata;
>>>>>>>> -uintptr_t dtb_early_pa __initdata;
>>>>>>>> +void *_dtb_early_va __initdata;
>>>>>>>> +uintptr_t _dtb_early_pa __initdata;
>>>>>>>>
>>>>>>>> struct pt_alloc_ops {
>>>>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
>>>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
>>>>>>>> (unsigned long)VMALLOC_END);
>>>>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
>>>>>>>> (unsigned long)high_memory);
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
>>>>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>> }
>>>>>>>> #else
>>>>>>>> static void print_vm_layout(void) { }
>>>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
>>>>>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
>>>>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> + vmlinux_start = __pa_symbol(&_sdata);
>>>>>>>> +#endif
>>>>>>>> +
>>>>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
>>>>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
>>>>>>>>
>>>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
>>>>>>>> memblock_allow_resize();
>>>>>>>> }
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +
>>>>>>>> +extern char _xiprom[], _exiprom[];
>>>>>>>> +extern char _sdata[], _edata[];
>>>>>>>> +
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>> +
>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>> -static struct pt_alloc_ops pt_ops;
>>>>>>>> +static struct pt_alloc_ops _pt_ops;
>>>>>>>> +
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
>>>>>>>> +#else
>>>>>>>> +#define pt_ops _pt_ops
>>>>>>>> +#endif
>>>>>>>>
>>>>>>>> unsigned long va_pa_offset;
>>>>>>>> EXPORT_SYMBOL(va_pa_offset);
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +#define va_pa_offset (*((unsigned long *)XIP_FIXUP(&va_pa_offset)))
>>>>>>>> +#endif
>>>>>>>> unsigned long pfn_base;
>>>>>>>> EXPORT_SYMBOL(pfn_base);
>>>>>>>>
>>>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
>>>>>>>> __page_aligned_bss;
>>>>>>>>
>>>>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
>>>>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
>>>>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>> +
>>>>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
>>>>>>>> pgprot_t prot)
>>>>>>>> {
>>>>>>>> unsigned long addr = __fix_to_virt(idx);
>>>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
>>>>>>>> __page_aligned_bss;
>>>>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>>>>>>> +
>>>>>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
>>>>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
>>>>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
>>>>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>> +
>>>>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
>>>>>>>> {
>>>>>>>> /* Before MMU is enabled */
>>>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>>>> return PMD_SIZE;
>>>>>>>> }
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> +/* called from head.S with MMU off */
>>>>>>>> +asmlinkage void __init __copy_data(void)
>>>>>>>> +{
>>>>>>>> + void *from = (void *)(&_sdata);
>>>>>>>> + void *end = (void *)(&_end);
>>>>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
>>>>>>>> + size_t sz = (size_t)(end - from);
>>>>>>>> +
>>>>>>>> + memcpy(to, from, sz);
>>>>>>>> +}
>>>>>>>> +#endif
>>>>>>>> +
>>>>>>>> /*
>>>>>>>> * setup_vm() is called from head.S with MMU-off.
>>>>>>>> *
>>>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>>>>
>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>>>>> {
>>>>>>>> - uintptr_t va, pa, end_va;
>>>>>>>> + uintptr_t va, end_va;
>>>>>>>> + uintptr_t __maybe_unused pa;
>>>>>>>> uintptr_t load_pa = (uintptr_t)(&_start);
>>>>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
>>>>>>>> uintptr_t map_size;
>>>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>> dtb_pa)
>>>>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
>>>>>>>> #endif
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>>>> (uintptr_t)(&_xiprom);
>>>>>>>> +
>>>>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
>>>>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
>>>>>>>> +#endif
>>>>>>>> va_pa_offset = PAGE_OFFSET - load_pa;
>>>>>
>>>>> I should have seen this before, I was too focused on having a XIP kernel
>>>>> boot. I already moved the kernel mapping in the vmalloc zone: the
>>>>> virtual to physical translations need to be handled differently now that
>>>>> the kernel mapping does not lie into linear mapping anymore, we can't
>>>>> use va_pa_offset defined above for both mappings.
>>>>>
>>>>> I was rebasing my patchset on the XIP patch but I believe that doing the
>>>>> other way around would greatly simplify the XIP patch as the kernel
>>>>> mapping would already be moved outside the linear mapping, there would
>>>>> be no need to reserve a zone in vmalloc anymore (that simplifies
>>>>> pgtable.h quite a lot). And the XIP kernel mapping could be implemented
>>>>> in a new create_kernel_page_table (that would also simplify mm/init.c).
>>>>>
>>>>> I can help to do that but I don't think we should merge this patch as is
>>>>> now.
>>>>
>>>> I think that's the right way to go for now: it's a lot harder to test
>>>> the XIP stuff, as it requires a bunch of harness changes. So let's
>>>> take the page table refactoring in now and rebase this stuff on top of
>>>> it. There's really no way to do both without making more work for
>>>> someone, it's just a headache on timing.
>>>>
>>>> Alex: if you want to sign up to spend some time there that'd be great,
>>>> otherwise I will.
>>>
>>> I can take care of that, no problem.
>>
>> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
>> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my setup.
>>
>> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
>> any other kernel at the end of the address space, not in the vmalloc
>> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
>> pfn_valid, copy_data and other stuff).
>>
>> Any comment is welcome !
>
> thanks for your efforts!
>
> I've just built your version. The build went well, but the image
> doesn't seem to boot for me.
Too bad. Can you give me your config please ?
Thanks,
Alex
> I'll take a look at the code later today.
>
> Best regards,
> Vitaly
>
>> Thanks,
>>
>> Alex
>>
>>>
>>>> Either way, can you point me (either just indicate the old version is
>>>> OK or send a new one) to what you want me to look at WRT the page
>>>> table code? IIRC it looked pretty much fine, but I'll take another
>>>> look ASAP so we can avoid serializing everything.
>>>
>>> The v3 is fine for me:
>>> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
>>>
>>>>
>>>>>
>>>>> Alex
>>>>>
>>>>>>>> pfn_base = PFN_DOWN(load_pa);
>>>>>>>>
>>>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>> dtb_pa)
>>>>>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
>>>>>>>> #endif
>>>>>>>>
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>>>> + va += PMD_SIZE) {
>>>>>>>> + create_pmd_mapping(xip_pmd, va,
>>>>>>>> + xiprom + (va - XIP_VIRT_ADDR_START),
>>>>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
>>>>>>>> +#endif
>>>>>>>> +
>>>>>>>> /*
>>>>>>>> * Setup early PGD covering entire kernel which will allows
>>>>>>>> * us to reach paging_init(). We map all memory banks later
>>>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>>>> (PMD_SIZE - 1));
>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
>>>>>>>> - dtb_early_va = __va(dtb_pa);
>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
>>>>>>>> #else
>>>>>>>> #ifndef CONFIG_BUILTIN_DTB
>>>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>>>>> pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>>>> (PGDIR_SIZE - 1));
>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
>>>>>>>> - dtb_early_va = __va(dtb_pa);
>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
>>>>>>>> #endif
>>>>>>>> dtb_early_pa = dtb_pa;
>>>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
>>>>>>>> uintptr_t va, map_size;
>>>>>>>> phys_addr_t pa, start, end;
>>>>>>>> u64 i;
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>>>> (uintptr_t)(&_xiprom);
>>>>>>>> +#endif
>>>>>>>>
>>>>>>>> /**
>>>>>>>> * MMU is enabled at this point. But page table setup is
>>>>>>>> not complete yet.
>>>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
>>>>>>>> map_size,
>>>>>>>> PAGE_KERNEL_EXEC);
>>>>>>>> }
>>>>>>>> }
>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>>>> + va += map_size)
>>>>>>>> + create_pgd_mapping(swapper_pg_dir, va,
>>>>>>>> + CONFIG_XIP_PHYS_ADDR + (va -
>>>>>>>> XIP_VIRT_ADDR_START),
>>>>>>>> + map_size, PAGE_KERNEL_EXEC);
>>>>>>>> +
>>>>>>>> +#endif
>>>>>>>>
>>>>>>>> /* Clear fixmap PTE and PMD mappings */
>>>>>>>> clear_fixmap(FIX_PTE);
>>>>>>
>>>>>> _______________________________________________
>>>>>> linux-riscv mailing list
>>>>>> [email protected]
>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>>
>>>>
>>>> _______________________________________________
>>>> linux-riscv mailing list
>>>> [email protected]
>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>
>>> _______________________________________________
>>> linux-riscv mailing list
>>> [email protected]
>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
Hi Vitaly,
Le 4/1/21 à 7:10 AM, Alex Ghiti a écrit :
> Le 4/1/21 à 4:52 AM, Vitaly Wool a écrit :
>> Hi Alex,
>>
>> On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <[email protected]> wrote:
>>>
>>> Hi,
>>>
>>> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
>>>> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
>>>>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
>>>>>>
>>>>>>
>>>>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
>>>>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
>>>>>>> <[email protected]> wrote:
>>>>>>>>
>>>>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
>>>>>>>> wrote:
>>>>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
>>>>>>>>> It allows code to be executed directly from non-volatile storage
>>>>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
>>>>>>>>> be found on many RISC-V platforms. This makes way for significant
>>>>>>>>> optimization of RAM footprint. The XIP kernel is not compressed
>>>>>>>>> since it has to run directly from flash, so it will occupy more
>>>>>>>>> space on the non-volatile storage. The physical flash address used
>>>>>>>>> to link the kernel object files and for storing it has to be known
>>>>>>>>> at compile time and is represented by a Kconfig option.
>>>>>>>>>
>>>>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
>>>>>>>>> kernels.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Vitaly Wool <[email protected]>
>>>>>>>>>
>>>>>>>>> ---
>>>>>>>>>
>>>>>>>>> Changes in v2:
>>>>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled
>>>>>>>>> yet
>>>>>>>>> Â Â Â o both for 32-bit and 64-bit RISC-V
>>>>>>>>> - SP is explicitly set to a safe place in RAM before
>>>>>>>>> __copy_data call
>>>>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
>>>>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>>>>>>>>> Changes in v3:
>>>>>>>>> - rebased against latest for-next
>>>>>>>>> - XIP address fixup macro now takes an argument
>>>>>>>>> - SMP related fixes
>>>>>>>>> Changes in v4:
>>>>>>>>> - rebased against the current for-next
>>>>>>>>> - less #ifdef's in C/ASM code
>>>>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
>>>>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
>>>>>>>>> - Fixed multi-core boot
>>>>>>>>> Changes in v5:
>>>>>>>>> - fixed build error for non-XIP kernels
>>>>>>>>> Changes in v6:
>>>>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
>>>>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
>>>>>>>>> Â Â Â PHYS_RAM_BASE in non-XIP configurations if needed
>>>>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid
>>>>>>>>> side
>>>>>>>>> Â Â Â effects
>>>>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
>>>>>>>>
>>>>>>>> So v5 landed on for-next, which generally means it's best to avoid
>>>>>>>> re-spinning the patch and instead send along fixups. That said,
>>>>>>>> the v5
>>>>>>>> is causing some testing failures for me.
>>>>>>>>
>>>>>>>> I'm going to drop the v5 for now as I don't have time to test this
>>>>>>>> tonight. I'll try and take a look soon, as it will conflict with
>>>>>>>> Alex's
>>>>>>>> patches.
>>>>>>>
>>>>>>> I can come up with the incremental patch instead pretty much
>>>>>>> straight
>>>>>>> away if that works better.
>>>>>>>
>>>>>>> ~Vitaly
>>>>>>>
>>>>>>>>>   arch/riscv/Kconfig                 | 49 ++++++++++-
>>>>>>>>>   arch/riscv/Makefile                |  8 +-
>>>>>>>>>   arch/riscv/boot/Makefile           | 13 +++
>>>>>>>>>   arch/riscv/include/asm/pgtable.h   | 65 ++++++++++++--
>>>>>>>>>   arch/riscv/kernel/cpu_ops_sbi.c    | 11 ++-
>>>>>>>>> Â Â arch/riscv/kernel/head.SÂ Â Â Â Â Â Â Â Â Â Â |Â 49 ++++++++++-
>>>>>>>>>   arch/riscv/kernel/head.h           |  3 +
>>>>>>>>>   arch/riscv/kernel/setup.c          |  8 +-
>>>>>>>>> Â Â arch/riscv/kernel/vmlinux-xip.lds.S | 132
>>>>>>>>> ++++++++++++++++++++++++++++
>>>>>>>>> Â Â arch/riscv/kernel/vmlinux.lds.SÂ Â Â Â |Â Â 6 ++
>>>>>>>>>   arch/riscv/mm/init.c               | 100 +++++++++++++++++++--
>>>>>>>>> Â Â 11 files changed, 426 insertions(+), 18 deletions(-)
>>>>>>>>> Â Â create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>>
>>>>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>>>>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
>>>>>>>>> --- a/arch/riscv/Kconfig
>>>>>>>>> +++ b/arch/riscv/Kconfig
>>>>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
>>>>>>>>>
>>>>>>>>> Â Â config EFI
>>>>>>>>> Â Â Â Â Â Â Â bool "UEFI runtime support"
>>>>>>>>> -Â Â Â Â depends on OF
>>>>>>>>> +Â Â Â Â depends on OF && !XIP_KERNEL
>>>>>>>>> Â Â Â Â Â Â Â select LIBFDT
>>>>>>>>> Â Â Â Â Â Â Â select UCS2_STRING
>>>>>>>>> Â Â Â Â Â Â Â select EFI_PARAMS_FROM_FDT
>>>>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
>>>>>>>>> Â Â Â Â Â Â Â def_bool y
>>>>>>>>> Â Â Â Â Â Â Â depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>>>>>>>>>
>>>>>>>>> +config PHYS_RAM_BASE_FIXED
>>>>>>>>> +Â Â Â Â bool "Explicitly specified physical RAM address"
>>>>>>>>> +Â Â Â Â default n
>>>>>>>>> +
>>>>>>>>> +config PHYS_RAM_BASE
>>>>>>>>> +Â Â Â Â hex "Platform Physical RAM address"
>>>>>>>>> +Â Â Â Â depends on PHYS_RAM_BASE_FIXED
>>>>>>>>> +Â Â Â Â default "0x80000000"
>>>>>>>>> +Â Â Â Â help
>>>>>>>>> +Â Â Â Â Â Â This is the physical address of RAM in the system. It has
>>>>>>>>> to be
>>>>>>>>> +Â Â Â Â Â Â explicitly specified to run early relocations of
>>>>>>>>> read-write data
>>>>>>>>> +Â Â Â Â Â Â from flash to RAM.
>>>>>>>>> +
>>>>>>>>> +config XIP_KERNEL
>>>>>>>>> +Â Â Â Â bool "Kernel Execute-In-Place from ROM"
>>>>>>>>> +Â Â Â Â depends on MMU
>>>>>>>>> +Â Â Â Â select PHYS_RAM_BASE_FIXED
>>>>>>>>> +Â Â Â Â help
>>>>>>>>> +Â Â Â Â Â Â Execute-In-Place allows the kernel to run from
>>>>>>>>> non-volatile storage
>>>>>>>>> +Â Â Â Â Â Â directly addressable by the CPU, such as NOR flash. This
>>>>>>>>> saves RAM
>>>>>>>>> +Â Â Â Â Â Â space since the text section of the kernel is not loaded
>>>>>>>>> from flash
>>>>>>>>> +      to RAM. Read-write sections, such as the data section and
>>>>>>>>> stack,
>>>>>>>>> +      are still copied to RAM. The XIP kernel is not compressed
>>>>>>>>> since
>>>>>>>>> +Â Â Â Â Â Â it has to run directly from flash, so it will take more
>>>>>>>>> space to
>>>>>>>>> +      store it. The flash address used to link the kernel
>>>>>>>>> object files,
>>>>>>>>> +Â Â Â Â Â Â and for storing it, is configuration dependent. Therefore,
>>>>>>>>> if you
>>>>>>>>> +Â Â Â Â Â Â say Y here, you must know the proper physical address
>>>>>>>>> where to
>>>>>>>>> +Â Â Â Â Â Â store the kernel image depending on your own flash memory
>>>>>>>>> usage.
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â Â Â Also note that the make target becomes "make xipImage"
>>>>>>>>> rather than
>>>>>>>>> +      "make zImage" or "make Image". The final kernel binary to
>>>>>>>>> put in
>>>>>>>>> +Â Â Â Â Â Â ROM memory will be arch/riscv/boot/xipImage.
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â Â Â If unsure, say N.
>>>>>>>>> +
>>>>>>>>> +config XIP_PHYS_ADDR
>>>>>>>>> +Â Â Â Â hex "XIP Kernel Physical Location"
>>>>>>>>> +Â Â Â Â depends on XIP_KERNEL
>>>>>>>>> +Â Â Â Â default "0x21000000"
>>>>>>>>> +Â Â Â Â help
>>>>>>>>> +Â Â Â Â Â Â This is the physical address in your flash memory the
>>>>>>>>> kernel will
>>>>>>>>> +      be linked for and stored to. This address is dependent on
>>>>>>>>> your
>>>>>>>>> +Â Â Â Â Â Â own flash usage.
>>>>>>>>> +
>>>>>>>>> Â Â endmenu
>>>>>>>>>
>>>>>>>>> Â Â config BUILTIN_DTB
>>>>>>>>> -Â Â Â Â def_bool n
>>>>>>>>> +Â Â Â Â bool
>>>>>>>>> Â Â Â Â Â Â Â depends on OF
>>>>>>>>> +Â Â Â Â default y if XIP_KERNEL
>>>>>>>>>
>>>>>>>>> Â Â menu "Power management options"
>>>>>>>>>
>>>>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
>>>>>>>>> index 1368d943f1f3..8fcbec03974d 100644
>>>>>>>>> --- a/arch/riscv/Makefile
>>>>>>>>> +++ b/arch/riscv/Makefile
>>>>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>>>>>>>>>
>>>>>>>>> Â Â # Default target when executing plain make
>>>>>>>>>   boot        := arch/riscv/boot
>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>>> +KBUILD_IMAGE := $(boot)/xipImage
>>>>>>>>> +else
>>>>>>>>> Â Â KBUILD_IMAGE := $(boot)/Image.gz
>>>>>>>>> +endif
>>>>>>>>>
>>>>>>>>> Â Â head-y := arch/riscv/kernel/head.o
>>>>>>>>>
>>>>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
>>>>>>>>> Â Â vdso_install:
>>>>>>>>> Â Â Â Â Â Â Â $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>>>>>>>>>
>>>>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>>> Â Â ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
>>>>>>>>> Â Â KBUILD_IMAGE := $(boot)/loader.bin
>>>>>>>>> Â Â else
>>>>>>>>> Â Â KBUILD_IMAGE := $(boot)/Image.gz
>>>>>>>>> Â Â endif
>>>>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
>>>>>>>>> +endif
>>>>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>>>>>>>>>
>>>>>>>>> Â Â all: $(notdir $(KBUILD_IMAGE))
>>>>>>>>>
>>>>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
>>>>>>>>> index 03404c84f971..6bf299f70c27 100644
>>>>>>>>> --- a/arch/riscv/boot/Makefile
>>>>>>>>> +++ b/arch/riscv/boot/Makefile
>>>>>>>>> @@ -17,8 +17,21 @@
>>>>>>>>> Â Â KCOV_INSTRUMENT := n
>>>>>>>>>
>>>>>>>>> Â Â OBJCOPYFLAGS_Image :=-O binary -R .note -R
>>>>>>>>> .note.gnu.build-id -R
>>>>>>>>> .comment -S
>>>>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
>>>>>>>>> -R .comment -S
>>>>>>>>>
>>>>>>>>> Â Â targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>>>>> xipImage
>>>>>>>>> +
>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>>> +
>>>>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
>>>>>>>>> +cmd_mkxip = $(cmd_objcopy)
>>>>>>>>> +
>>>>>>>>> +$(obj)/xipImage: vmlinux FORCE
>>>>>>>>> +Â Â Â Â $(call if_changed,mkxip)
>>>>>>>>> +Â Â Â Â @$(kecho) 'Â Physical Address of xipImage:
>>>>>>>>> $(CONFIG_XIP_PHYS_ADDR)'
>>>>>>>>> +
>>>>>>>>> +endif
>>>>>>>>>
>>>>>>>>> Â Â $(obj)/Image: vmlinux FORCE
>>>>>>>>> Â Â Â Â Â Â Â $(call if_changed,objcopy)
>>>>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
>>>>>>>>> b/arch/riscv/include/asm/pgtable.h
>>>>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
>>>>>>>>> --- a/arch/riscv/include/asm/pgtable.h
>>>>>>>>> +++ b/arch/riscv/include/asm/pgtable.h
>>>>>>>>> @@ -11,6 +11,33 @@
>>>>>>>>>
>>>>>>>>> Â Â #include <asm/pgtable-bits.h>
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_MMU
>>>>>>>>> +
>>>>>>>>> +#define VMALLOC_STARTÂ Â Â (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>>>>> +
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +#define VMALLOC_SIZEÂ Â Â Â ((KERN_VIRT_SIZE >> 1) - SZ_16M)
>>>>>>>>> +#define VMALLOC_ENDÂ Â Â Â Â (PAGE_OFFSET - SZ_16M - 1)
>>>>>>>>> +
>>>>>>>>> +#define XIP_OFFSETÂ Â Â Â Â Â Â Â Â Â SZ_8M
>>>>>>>>> +#define XIP_MASKÂ Â Â Â Â Â Â Â Â Â Â Â (SZ_8M - 1)
>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr)Â Â Â Â Â \
>>>>>>>>> +Â Â Â Â (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
>>>>>>>>> +
>>>>>>>>> +#else
>>>>>>>>> +
>>>>>>>>> +#define VMALLOC_SIZEÂ Â Â Â (KERN_VIRT_SIZE >> 1)
>>>>>>>>> +#define VMALLOC_ENDÂ Â Â Â Â (PAGE_OFFSET - 1)
>>>>>>>>> +
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>> +
>>>>>>>>> +#else
>>>>>>>>> +
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>> +#endif /* CONFIG_MMU */
>>>>>>>>> +
>>>>>>>>> Â Â #ifndef __ASSEMBLY__
>>>>>>>>>
>>>>>>>>> Â Â /* Page Upper Directory not used in RISC-V */
>>>>>>>>> @@ -21,9 +48,25 @@
>>>>>>>>>
>>>>>>>>> Â Â #ifdef CONFIG_MMU
>>>>>>>>>
>>>>>>>>> -#define VMALLOC_SIZEÂ Â Â Â (KERN_VIRT_SIZE >> 1)
>>>>>>>>> -#define VMALLOC_ENDÂ Â Â Â Â (PAGE_OFFSET - 1)
>>>>>>>>> -#define VMALLOC_STARTÂ Â Â (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +/*
>>>>>>>>> + * Since we use sections to map it, this macro replaces the
>>>>>>>>> physical address
>>>>>>>>> + * with its virtual address while keeping offset from the base
>>>>>>>>> section.
>>>>>>>>> + */
>>>>>>>>> +#define XIP_PHYS_ADDR(va)Â Â Â Â \
>>>>>>>>> +Â Â Â Â ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
>>>>>>>>> CONFIG_XIP_PHYS_ADDR)
>>>>>>>>> +
>>>>>>>>> +#define XIP_VIRT_ADDR_STARTÂ XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>>> +
>>>>>>>>> +#define XIP_FIXUP(addr)Â Â Â Â Â Â Â Â Â Â Â Â Â ({ \
>>>>>>>>> +Â Â Â Â uintptr_t __a = (uintptr_t)(addr); \
>>>>>>>>> +Â Â Â Â (__a >= CONFIG_XIP_PHYS_ADDR && \
>>>>>>>>> +Â Â Â Â Â __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
>>>>>>>>> +Â Â Â Â __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
>>>>>>>>> XIP_OFFSET : __a; \
>>>>>>>>> +})
>>>>>>>>> +#else
>>>>>>>>> +#define XIP_FIXUP(addr)Â Â Â Â Â Â Â Â Â Â Â Â Â (addr)
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>
>>>>>>>>> Â Â #define BPF_JIT_REGION_SIZEÂ (SZ_128M)
>>>>>>>>> Â Â #define BPF_JIT_REGION_START (PAGE_OFFSET -
>>>>>>>>> BPF_JIT_REGION_SIZE)
>>>>>>>>> @@ -484,8 +527,20 @@ static inline int
>>>>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
>>>>>>>>>
>>>>>>>>> Â Â #define kern_addr_valid(addr)Â Â (1) /* FIXME */
>>>>>>>>>
>>>>>>>>> -extern void *dtb_early_va;
>>>>>>>>> -extern uintptr_t dtb_early_pa;
>>>>>>>>> +extern void *_dtb_early_va;
>>>>>>>>> +extern uintptr_t _dtb_early_pa;
>>>>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
>>>>>>>>> +
>>>>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
>>>>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
>>>>>>>>> +
>>>>>>>>> +#else
>>>>>>>>> +
>>>>>>>>> +#define dtb_early_va _dtb_early_va
>>>>>>>>> +#define dtb_early_pa _dtb_early_pa
>>>>>>>>> +
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>> +
>>>>>>>>> Â Â void setup_bootmem(void);
>>>>>>>>> Â Â void paging_init(void);
>>>>>>>>> Â Â void misc_mem_init(void);
>>>>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>> index 685fae72b7f5..2413c2997350 100644
>>>>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
>>>>>>>>> long hartid)
>>>>>>>>> Â Â }
>>>>>>>>> Â Â #endif
>>>>>>>>>
>>>>>>>>> +static inline unsigned long get_secondary_start_phys(void)
>>>>>>>>> +{
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +Â Â Â Â return XIP_PHYS_ADDR(secondary_start_sbi);
>>>>>>>>> +#else
>>>>>>>>> +Â Â Â Â return __pa_symbol(secondary_start_sbi);
>>>>>>>>> +#endif
>>>>>>>>> +}
>>>>>>>>> +
>>>>>>>>> Â Â static int sbi_cpu_start(unsigned int cpuid, struct task_struct
>>>>>>>>> *tidle)
>>>>>>>>> Â Â {
>>>>>>>>> Â Â Â Â Â Â Â int rc;
>>>>>>>>> -Â Â Â Â unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
>>>>>>>>> +Â Â Â Â unsigned long boot_addr = get_secondary_start_phys();
>>>>>>>>> Â Â Â Â Â Â Â int hartid = cpuid_to_hartid_map(cpuid);
>>>>>>>>>
>>>>>>>>> Â Â Â Â Â Â Â cpu_update_secondary_bootdata(cpuid, tidle);
>>>>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>>>>>>>>> index f5a9bad86e58..bbe74e37914f 100644
>>>>>>>>> --- a/arch/riscv/kernel/head.S
>>>>>>>>> +++ b/arch/riscv/kernel/head.S
>>>>>>>>> @@ -9,11 +9,23 @@
>>>>>>>>> Â Â #include <linux/linkage.h>
>>>>>>>>> Â Â #include <asm/thread_info.h>
>>>>>>>>> Â Â #include <asm/page.h>
>>>>>>>>> +#include <asm/pgtable.h>
>>>>>>>>> Â Â #include <asm/csr.h>
>>>>>>>>> Â Â #include <asm/hwcap.h>
>>>>>>>>> Â Â #include <asm/image.h>
>>>>>>>>> Â Â #include "efi-header.S"
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>>>>> +Â Â Â Â REG_L t0, _xip_fixup
>>>>>>>>> +Â Â Â Â add \reg, \reg, t0
>>>>>>>>> +.endm
>>>>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
>>>>>>>>> XIP_OFFSET
>>>>>>>>> +#else
>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>>>>> +.endm
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>> +
>>>>>>>>> Â Â __HEAD
>>>>>>>>> Â Â ENTRY(_start)
>>>>>>>>> Â Â Â Â Â Â Â /*
>>>>>>>>> @@ -69,7 +81,11 @@ pe_head_start:
>>>>>>>>> Â Â #ifdef CONFIG_MMU
>>>>>>>>> Â Â relocate:
>>>>>>>>> Â Â Â Â Â Â Â /* Relocate return address */
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +Â Â Â Â li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>>> +#else
>>>>>>>>> Â Â Â Â Â Â Â li a1, PAGE_OFFSET
>>>>>>>>> +#endif
>>>>>>>>> Â Â Â Â Â Â Â la a2, _start
>>>>>>>>> Â Â Â Â Â Â Â sub a1, a1, a2
>>>>>>>>> Â Â Â Â Â Â Â add ra, ra, a1
>>>>>>>>> @@ -91,6 +107,7 @@ relocate:
>>>>>>>>> Â Â Â Â Â Â Â Â * to ensure the new translations are in use.
>>>>>>>>> Â Â Â Â Â Â Â Â */
>>>>>>>>> Â Â Â Â Â Â Â la a0, trampoline_pg_dir
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a0
>>>>>>>>> Â Â Â Â Â Â Â srl a0, a0, PAGE_SHIFT
>>>>>>>>> Â Â Â Â Â Â Â or a0, a0, a1
>>>>>>>>> Â Â Â Â Â Â Â sfence.vma
>>>>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
>>>>>>>>>
>>>>>>>>> Â Â Â Â Â Â Â slli a3, a0, LGREG
>>>>>>>>> Â Â Â Â Â Â Â la a4, __cpu_up_stack_pointer
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a4
>>>>>>>>> Â Â Â Â Â Â Â la a5, __cpu_up_task_pointer
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a5
>>>>>>>>> Â Â Â Â Â Â Â add a4, a3, a4
>>>>>>>>> Â Â Â Â Â Â Â add a5, a3, a5
>>>>>>>>> Â Â Â Â Â Â Â REG_L sp, (a4)
>>>>>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
>>>>>>>>> Â Â #ifdef CONFIG_MMU
>>>>>>>>> Â Â Â Â Â Â Â /* Enable virtual memory and relocate to virtual
>>>>>>>>> address */
>>>>>>>>> Â Â Â Â Â Â Â la a0, swapper_pg_dir
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a0
>>>>>>>>> Â Â Â Â Â Â Â call relocate
>>>>>>>>> Â Â #endif
>>>>>>>>> Â Â Â Â Â Â Â call setup_trap_vector
>>>>>>>>> @@ -236,12 +256,33 @@ pmp_done:
>>>>>>>>> Â Â .Lgood_cores:
>>>>>>>>> Â Â #endif
>>>>>>>>>
>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>>>>> Â Â Â Â Â Â Â /* Pick one hart to run the main boot sequence */
>>>>>>>>> Â Â Â Â Â Â Â la a3, hart_lottery
>>>>>>>>> Â Â Â Â Â Â Â li a2, 1
>>>>>>>>> Â Â Â Â Â Â Â amoadd.w a3, a2, (a3)
>>>>>>>>> Â Â Â Â Â Â Â bnez a3, .Lsecondary_start
>>>>>>>>>
>>>>>>>>> +#else
>>>>>>>>> +Â Â Â Â /* hart_lottery in flash contains a magic number */
>>>>>>>>> +Â Â Â Â la a3, hart_lottery
>>>>>>>>> +Â Â Â Â mv a2, a3
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a2
>>>>>>>>> +Â Â Â Â lw t1, (a3)
>>>>>>>>> +Â Â Â Â amoswap.w t0, t1, (a2)
>>>>>>>>> +Â Â Â Â /* first time here if hart_lottery in RAM is not set */
>>>>>>>>> +Â Â Â Â beq t0, t1, .Lsecondary_start
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â la sp, _end + THREAD_SIZE
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET sp
>>>>>>>>> +Â Â Â Â mv s0, a0
>>>>>>>>> +Â Â Â Â call __copy_data
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â /* Restore a0 copy */
>>>>>>>>> +Â Â Â Â mv a0, s0
>>>>>>>>> +#endif
>>>>>>>>> +
>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>>>>> Â Â Â Â Â Â Â /* Clear BSS for flat non-ELF images */
>>>>>>>>> Â Â Â Â Â Â Â la a3, __bss_start
>>>>>>>>> Â Â Â Â Â Â Â la a4, __bss_stop
>>>>>>>>> @@ -251,15 +292,18 @@ clear_bss:
>>>>>>>>> Â Â Â Â Â Â Â add a3, a3, RISCV_SZPTR
>>>>>>>>> Â Â Â Â Â Â Â blt a3, a4, clear_bss
>>>>>>>>> Â Â clear_bss_done:
>>>>>>>>> -
>>>>>>>>> +#endif
>>>>>>>>> Â Â Â Â Â Â Â /* Save hart ID and DTB physical address */
>>>>>>>>> Â Â Â Â Â Â Â mv s0, a0
>>>>>>>>> Â Â Â Â Â Â Â mv s1, a1
>>>>>>>>> +
>>>>>>>>> Â Â Â Â Â Â Â la a2, boot_cpu_hartid
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a2
>>>>>>>>> Â Â Â Â Â Â Â REG_S a0, (a2)
>>>>>>>>>
>>>>>>>>> Â Â Â Â Â Â Â /* Initialize page tables and relocate to virtual
>>>>>>>>> addresses */
>>>>>>>>> Â Â Â Â Â Â Â la sp, init_thread_union + THREAD_SIZE
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET sp
>>>>>>>>> Â Â #ifdef CONFIG_BUILTIN_DTB
>>>>>>>>> Â Â Â Â Â Â Â la a0, __dtb_start
>>>>>>>>> Â Â #else
>>>>>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
>>>>>>>>> Â Â Â Â Â Â Â call setup_vm
>>>>>>>>> Â Â #ifdef CONFIG_MMU
>>>>>>>>> Â Â Â Â Â Â Â la a0, early_pg_dir
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a0
>>>>>>>>> Â Â Â Â Â Â Â call relocate
>>>>>>>>> Â Â #endif /* CONFIG_MMU */
>>>>>>>>>
>>>>>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
>>>>>>>>>
>>>>>>>>> Â Â Â Â Â Â Â slli a3, a0, LGREG
>>>>>>>>> Â Â Â Â Â Â Â la a1, __cpu_up_stack_pointer
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a1
>>>>>>>>> Â Â Â Â Â Â Â la a2, __cpu_up_task_pointer
>>>>>>>>> +Â Â Â Â XIP_FIXUP_OFFSET a2
>>>>>>>>> Â Â Â Â Â Â Â add a1, a3, a1
>>>>>>>>> Â Â Â Â Â Â Â add a2, a3, a2
>>>>>>>>>
>>>>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
>>>>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
>>>>>>>>> --- a/arch/riscv/kernel/head.h
>>>>>>>>> +++ b/arch/riscv/kernel/head.h
>>>>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>>>>>>>>>
>>>>>>>>> Â Â asmlinkage void do_page_fault(struct pt_regs *regs);
>>>>>>>>> Â Â asmlinkage void __init setup_vm(uintptr_t dtb_pa);
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +asmlinkage void __init __copy_data(void);
>>>>>>>>> +#endif
>>>>>>>>>
>>>>>>>>> Â Â extern void *__cpu_up_stack_pointer[];
>>>>>>>>> Â Â extern void *__cpu_up_task_pointer[];
>>>>>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>>>>>>>>> index e85bacff1b50..a0384c72c272 100644
>>>>>>>>> --- a/arch/riscv/kernel/setup.c
>>>>>>>>> +++ b/arch/riscv/kernel/setup.c
>>>>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
>>>>>>>>> __section(".data") = {
>>>>>>>>> Â Â Â * This is used before the kernel initializes the BSS so it
>>>>>>>>> can't be in the
>>>>>>>>> Â Â Â * BSS.
>>>>>>>>> Â Â Â */
>>>>>>>>> -atomic_t hart_lottery __section(".sdata");
>>>>>>>>> +atomic_t hart_lottery __section(".sdata")
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> += ATOMIC_INIT(0xC001BEEF)
>>>>>>>>> +#endif
>>>>>>>>> +;
>>>>>>>>> Â Â unsigned long boot_cpu_hartid;
>>>>>>>>> Â Â static DEFINE_PER_CPU(struct cpu, cpu_devices);
>>>>>>>>>
>>>>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
>>>>>>>>> Â Â #if IS_ENABLED(CONFIG_BUILTIN_DTB)
>>>>>>>>> Â Â Â Â Â Â Â unflatten_and_copy_device_tree();
>>>>>>>>> Â Â #else
>>>>>>>>> -Â Â Â Â if (early_init_dt_verify(__va(dtb_early_pa)))
>>>>>>>>> +Â Â Â Â if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
>>>>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â unflatten_device_tree();
>>>>>>>>> Â Â Â Â Â Â Â else
>>>>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("No DTB found in kernel mappings\n");
>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>> new file mode 100644
>>>>>>>>> index 000000000000..9f0f08c34cd3
>>>>>>>>> --- /dev/null
>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>> @@ -0,0 +1,132 @@
>>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>>>>>>>> +/*
>>>>>>>>> + * Copyright (C) 2012 Regents of the University of California
>>>>>>>>> + * Copyright (C) 2017 SiFive
>>>>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
>>>>>>>>> + */
>>>>>>>>> +
>>>>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>>> +/* No __ro_after_init data in the .rodata section - which will
>>>>>>>>> always be ro */
>>>>>>>>> +#define RO_AFTER_INIT_DATA
>>>>>>>>> +
>>>>>>>>> +#include <asm/vmlinux.lds.h>
>>>>>>>>> +#include <asm/page.h>
>>>>>>>>> +#include <asm/pgtable.h>
>>>>>>>>> +#include <asm/cache.h>
>>>>>>>>> +#include <asm/thread_info.h>
>>>>>>>>> +
>>>>>>>>> +OUTPUT_ARCH(riscv)
>>>>>>>>> +ENTRY(_start)
>>>>>>>>> +
>>>>>>>>> +jiffies = jiffies_64;
>>>>>>>>> +
>>>>>>>>> +SECTIONS
>>>>>>>>> +{
>>>>>>>>> +Â Â Â Â /* Beginning of code and text segment */
>>>>>>>>> +Â Â Â Â . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
>>>>>>>>> +Â Â Â Â _xiprom = .;
>>>>>>>>> +Â Â Â Â _start = .;
>>>>>>>>> +Â Â Â Â HEAD_TEXT_SECTION
>>>>>>>>> +Â Â Â Â INIT_TEXT_SECTION(PAGE_SIZE)
>>>>>>>>> +Â Â Â Â /* we have to discard exit text and such at runtime, not
>>>>>>>>> link time */
>>>>>>>>> +Â Â Â Â .exit.text :
>>>>>>>>> +Â Â Â Â {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â EXIT_TEXT
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â .text : {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â _text = .;
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â _stext = .;
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â TEXT_TEXT
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â SCHED_TEXT
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â CPUIDLE_TEXT
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â LOCK_TEXT
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â KPROBES_TEXT
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â ENTRY_TEXT
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â IRQENTRY_TEXT
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â SOFTIRQENTRY_TEXT
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.fixup)
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â _etext = .;
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +Â Â Â Â RO_DATA(L1_CACHE_BYTES)
>>>>>>>>> +Â Â Â Â .srodata : {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.srodata*)
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +Â Â Â Â .init.rodata : {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_SETUP(16)
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_CALLS
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â CON_INITCALL
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_RAM_FS
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +Â Â Â Â _exiprom = .;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* End of XIP ROM area */
>>>>>>>>> +
>>>>>>>>> +
>>>>>>>>> +/*
>>>>>>>>> + * From this point, stuff is considered writable and will be
>>>>>>>>> copied to RAM
>>>>>>>>> + */
>>>>>>>>> +Â Â Â Â __data_loc = ALIGN(16);Â Â Â Â Â Â Â Â /* location in file */
>>>>>>>>> +Â Â Â Â . = PAGE_OFFSET;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* location in memory */
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â _sdata = .;Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* Start of data section */
>>>>>>>>> +Â Â Â Â _data = .;
>>>>>>>>> +Â Â Â Â RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
>>>>>>>>> +Â Â Â Â _edata = .;
>>>>>>>>> +Â Â Â Â __start_ro_after_init = .;
>>>>>>>>> +Â Â Â Â .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
>>>>>>>>> LOAD_OFFSET) {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.data..ro_after_init)
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +Â Â Â Â __end_ro_after_init = .;
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â . = ALIGN(PAGE_SIZE);
>>>>>>>>> +Â Â Â Â __init_begin = .;
>>>>>>>>> +Â Â Â Â .init.data : {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â INIT_DATA
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +Â Â Â Â .exit.data : {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â EXIT_DATA
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +Â Â Â Â . = ALIGN(8);
>>>>>>>>> +Â Â Â Â __soc_early_init_table : {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_early_init_table_start = .;
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â KEEP(*(__soc_early_init_table))
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_early_init_table_end = .;
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +Â Â Â Â __soc_builtin_dtb_table : {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_builtin_dtb_table_start = .;
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â KEEP(*(__soc_builtin_dtb_table))
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __soc_builtin_dtb_table_end = .;
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +Â Â Â Â PERCPU_SECTION(L1_CACHE_BYTES)
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â . = ALIGN(PAGE_SIZE);
>>>>>>>>> +Â Â Â Â __init_end = .;
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â .sdata : {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â __global_pointer$ = . + 0x800;
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.sdata*)
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.sbss*)
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>>>>>>>>> +Â Â Â Â EXCEPTION_TABLE(0x10)
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â *(.rel.dyn*)
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â /*
>>>>>>>>> +Â Â Â Â Â * End of copied data. We need a dummy section to get its
>>>>>>>>> LMA.
>>>>>>>>> +Â Â Â Â Â * Also located before final ALIGN() as trailing padding is
>>>>>>>>> not stored
>>>>>>>>> +Â Â Â Â Â * in the resulting binary file and useless to copy.
>>>>>>>>> +Â Â Â Â Â */
>>>>>>>>> +Â Â Â Â .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
>>>>>>>>> +Â Â Â Â _edata_loc = LOADADDR(.data.endmark);
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â . = ALIGN(PAGE_SIZE);
>>>>>>>>> +Â Â Â Â _end = .;
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â STABS_DEBUG
>>>>>>>>> +Â Â Â Â DWARF_DEBUG
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â DISCARDS
>>>>>>>>> +}
>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>> b/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>> index de03cb22d0e9..6745ec325930 100644
>>>>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>> @@ -4,7 +4,12 @@
>>>>>>>>> Â Â Â * Copyright (C) 2017 SiFive
>>>>>>>>> Â Â Â */
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +#include "vmlinux-xip.lds.S"
>>>>>>>>> +#else
>>>>>>>>> +
>>>>>>>>> Â Â #define LOAD_OFFSET PAGE_OFFSET
>>>>>>>>> +
>>>>>>>>> Â Â #include <asm/vmlinux.lds.h>
>>>>>>>>> Â Â #include <asm/page.h>
>>>>>>>>> Â Â #include <asm/cache.h>
>>>>>>>>> @@ -132,3 +137,4 @@ SECTIONS
>>>>>>>>>
>>>>>>>>> Â Â Â Â Â Â Â DISCARDS
>>>>>>>>> Â Â }
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
>>>>>>>>> index 7f5036fbee8c..efe649d41f95 100644
>>>>>>>>> --- a/arch/riscv/mm/init.c
>>>>>>>>> +++ b/arch/riscv/mm/init.c
>>>>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>>>>>>>>>
>>>>>>>>> Â Â extern char _start[];
>>>>>>>>> Â Â #define DTB_EARLY_BASE_VAÂ Â Â Â Â PGDIR_SIZE
>>>>>>>>> -void *dtb_early_va __initdata;
>>>>>>>>> -uintptr_t dtb_early_pa __initdata;
>>>>>>>>> +void *_dtb_early_va __initdata;
>>>>>>>>> +uintptr_t _dtb_early_pa __initdata;
>>>>>>>>>
>>>>>>>>> Â Â struct pt_alloc_ops {
>>>>>>>>> Â Â Â Â Â Â Â pte_t *(*get_pte_virt)(phys_addr_t pa);
>>>>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
>>>>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)VMALLOC_END);
>>>>>>>>> Â Â Â Â Â Â Â print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
>>>>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)high_memory);
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +Â Â Â Â print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>> Â Â }
>>>>>>>>> Â Â #else
>>>>>>>>> Â Â static void print_vm_layout(void) { }
>>>>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
>>>>>>>>> Â Â Â Â Â Â Â phys_addr_t dram_end = memblock_end_of_DRAM();
>>>>>>>>> Â Â Â Â Â Â Â phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +Â Â Â Â vmlinux_start = __pa_symbol(&_sdata);
>>>>>>>>> +#endif
>>>>>>>>> +
>>>>>>>>> Â Â Â Â Â Â Â /* The maximal physical memory size is -PAGE_OFFSET. */
>>>>>>>>> Â Â Â Â Â Â Â memblock_enforce_memory_limit(-PAGE_OFFSET);
>>>>>>>>>
>>>>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
>>>>>>>>> Â Â Â Â Â Â Â memblock_allow_resize();
>>>>>>>>> Â Â }
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +
>>>>>>>>> +extern char _xiprom[], _exiprom[];
>>>>>>>>> +extern char _sdata[], _edata[];
>>>>>>>>> +
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>> +
>>>>>>>>> Â Â #ifdef CONFIG_MMU
>>>>>>>>> -static struct pt_alloc_ops pt_ops;
>>>>>>>>> +static struct pt_alloc_ops _pt_ops;
>>>>>>>>> +
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
>>>>>>>>> +#else
>>>>>>>>> +#define pt_ops      _pt_ops
>>>>>>>>> +#endif
>>>>>>>>>
>>>>>>>>> Â Â unsigned long va_pa_offset;
>>>>>>>>> Â Â EXPORT_SYMBOL(va_pa_offset);
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +#define va_pa_offset (*((unsigned long
>>>>>>>>> *)XIP_FIXUP(&va_pa_offset)))
>>>>>>>>> +#endif
>>>>>>>>> Â Â unsigned long pfn_base;
>>>>>>>>> Â Â EXPORT_SYMBOL(pfn_base);
>>>>>>>>>
>>>>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
>>>>>>>>> __page_aligned_bss;
>>>>>>>>>
>>>>>>>>> Â Â pgd_t early_pg_dir[PTRS_PER_PGD] __initdata
>>>>>>>>> __aligned(PAGE_SIZE);
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +#define trampoline_pg_dir   ((pgd_t
>>>>>>>>> *)XIP_FIXUP(trampoline_pg_dir))
>>>>>>>>> +#define fixmap_pte          ((pte_t *)XIP_FIXUP(fixmap_pte))
>>>>>>>>> +#define early_pg_dir        ((pgd_t *)XIP_FIXUP(early_pg_dir))
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>> +
>>>>>>>>> Â Â void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
>>>>>>>>> pgprot_t prot)
>>>>>>>>> Â Â {
>>>>>>>>> Â Â Â Â Â Â Â unsigned long addr = __fix_to_virt(idx);
>>>>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
>>>>>>>>> __page_aligned_bss;
>>>>>>>>> Â Â pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>>>>>> Â Â pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata
>>>>>>>>> __aligned(PAGE_SIZE);
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>>>>>>>> +
>>>>>>>>> +#define trampoline_pmd      ((pmd_t *)XIP_FIXUP(trampoline_pmd))
>>>>>>>>> +#define fixmap_pmd  ((pmd_t *)XIP_FIXUP(fixmap_pmd))
>>>>>>>>> +#define xip_pmd             ((pmd_t *)XIP_FIXUP(xip_pmd))
>>>>>>>>> +#define early_pmd   ((pmd_t *)XIP_FIXUP(early_pmd))
>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>> +
>>>>>>>>> Â Â static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
>>>>>>>>> Â Â {
>>>>>>>>> Â Â Â Â Â Â Â /* Before MMU is enabled */
>>>>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>>>>> Â Â Â Â Â Â Â return PMD_SIZE;
>>>>>>>>> Â Â }
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +/* called from head.S with MMU off */
>>>>>>>>> +asmlinkage void __init __copy_data(void)
>>>>>>>>> +{
>>>>>>>>> +Â Â Â Â void *from = (void *)(&_sdata);
>>>>>>>>> +Â Â Â Â void *end = (void *)(&_end);
>>>>>>>>> +Â Â Â Â void *to = (void *)CONFIG_PHYS_RAM_BASE;
>>>>>>>>> +Â Â Â Â size_t sz = (size_t)(end - from);
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â memcpy(to, from, sz);
>>>>>>>>> +}
>>>>>>>>> +#endif
>>>>>>>>> +
>>>>>>>>> Â Â /*
>>>>>>>>> Â Â Â * setup_vm() is called from head.S with MMU-off.
>>>>>>>>> Â Â Â *
>>>>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>>>>>
>>>>>>>>> Â Â asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>>>>>> Â Â {
>>>>>>>>> -Â Â Â Â uintptr_t va, pa, end_va;
>>>>>>>>> +Â Â Â Â uintptr_t va, end_va;
>>>>>>>>> +Â Â Â Â uintptr_t __maybe_unused pa;
>>>>>>>>> Â Â Â Â Â Â Â uintptr_t load_pa = (uintptr_t)(&_start);
>>>>>>>>> Â Â Â Â Â Â Â uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
>>>>>>>>> Â Â Â Â Â Â Â uintptr_t map_size;
>>>>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>> dtb_pa)
>>>>>>>>> Â Â Â Â Â Â Â pmd_t fix_bmap_spmd, fix_bmap_epmd;
>>>>>>>>> Â Â #endif
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +Â Â Â Â uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
>>>>>>>>> +Â Â Â Â uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>>>>> (uintptr_t)(&_xiprom);
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
>>>>>>>>> +Â Â Â Â load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
>>>>>>>>> +#endif
>>>>>>>>> Â Â Â Â Â Â Â va_pa_offset = PAGE_OFFSET - load_pa;
>>>>>>
>>>>>> I should have seen this before, I was too focused on having a XIP
>>>>>> kernel
>>>>>> boot. I already moved the kernel mapping in the vmalloc zone: the
>>>>>> virtual to physical translations need to be handled differently
>>>>>> now that
>>>>>> the kernel mapping does not lie into linear mapping anymore, we can't
>>>>>> use va_pa_offset defined above for both mappings.
>>>>>>
>>>>>> I was rebasing my patchset on the XIP patch but I believe that
>>>>>> doing the
>>>>>> other way around would greatly simplify the XIP patch as the kernel
>>>>>> mapping would already be moved outside the linear mapping, there
>>>>>> would
>>>>>> be no need to reserve a zone in vmalloc anymore (that simplifies
>>>>>> pgtable.h quite a lot). And the XIP kernel mapping could be
>>>>>> implemented
>>>>>> in a new create_kernel_page_table (that would also simplify
>>>>>> mm/init.c).
>>>>>>
>>>>>> I can help to do that but I don't think we should merge this patch
>>>>>> as is
>>>>>> now.
>>>>>
>>>>> I think that's the right way to go for now: it's a lot harder to test
>>>>> the XIP stuff, as it requires a bunch of harness changes. So let's
>>>>> take the page table refactoring in now and rebase this stuff on top of
>>>>> it. There's really no way to do both without making more work for
>>>>> someone, it's just a headache on timing.
>>>>>
>>>>> Alex: if you want to sign up to spend some time there that'd be great,
>>>>> otherwise I will.
>>>>
>>>> I can take care of that, no problem.
>>>
>>> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
>>> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my
>>> setup.
>>>
>>> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
>>> any other kernel at the end of the address space, not in the vmalloc
>>> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
>>> pfn_valid, copy_data and other stuff).
>>>
>>> Any comment is welcome !
>>
>> thanks for your efforts!
>>
>> I've just built your version. The build went well, but the image
>> doesn't seem to boot for me.
>
> Too bad. Can you give me your config please ?
>
Apparently, as you can see below, your config works for me, at least it
reaches userspace. Do you have traces or more info about what is wrong ?
Thanks!
[ 0.000000] Linux version 5.12.0-rc2 (alex@debian)
(riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.11.2) 9.3.0,
GNU ld (GNU Binutils) 2.34) #322 SMP Sat Apr 3 05:50:18 EDT 2021
[ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit
[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[ 0.000000] printk: bootconsole [sbi0] enabled
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000080000000-0x00000000bfffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] DMA32 zone: 3584 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
[ 0.000000] SBI specification v0.2 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x6
[ 0.000000] SBI v0.2 TIME extension detected
[ 0.000000] SBI v0.2 IPI extension detected
[ 0.000000] SBI v0.2 RFENCE extension detected
[ 0.000000] software IO TLB: mapped [mem
0x00000000b9e00000-0x00000000bde00000] (64MB)
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] riscv: ISA extensions acdfim
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] percpu: Embedded 17 pages/cpu s29856 r8192 d31584 u69632
[ 0.000000] pcpu-alloc: s29856 r8192 d31584 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258560
[ 0.000000] Kernel command line: earlyprintk debug earlycon=sbi
console=ttyS0,115200n8 root=/dev/ram0 init=/sbin/init
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8,
1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288
bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 947732K/1048576K available (2999K kernel code,
692K rwdata, 953K rodata, 205K init, 247K bss, 100844K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU debug extended QS entry/exit.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] riscv-intc: unable to find hart id for
/cpus/cpu@0/interrupt-controller
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: interrupt-controller@c000000: mapped 186 interrupts
with 4 handlers for 9 contexts.
[ 0.000000] random: get_random_bytes called from
start_kernel+0x2fe/0x49c with crng_init=0
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0]
hartid [1]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff
max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
[ 0.000146] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps
every 2199023255500ns
[ 0.006056] Console: colour dummy device 80x25
[ 0.015242] Calibrating delay loop (skipped), value calculated using
timer frequency.. 2.00 BogoMIPS (lpj=4000)
[ 0.017130] pid_max: default: 32768 minimum: 301
[ 0.020115] Mount-cache hash table entries: 2048 (order: 2, 16384
bytes, linear)
[ 0.021097] Mountpoint-cache hash table entries: 2048 (order: 2,
16384 bytes, linear)
[ 0.078755] ASID allocator using 16 bits (65536 entries)
[ 0.083669] rcu: Hierarchical SRCU implementation.
[ 0.093304] smp: Bringing up secondary CPUs ...
[ 1.149900] CPU1: failed to come online
[ 2.204183] CPU2: failed to come online
[ 3.256211] CPU3: failed to come online
[ 3.257043] smp: Brought up 1 node, 1 CPU
[ 3.269554] devtmpfs: initialized
[ 3.282015] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 3.283484] futex hash table entries: 1024 (order: 4, 65536 bytes,
linear)
[ 3.381718] SCSI subsystem initialized
[ 3.385115] clocksource: Switched to clocksource riscv_clocksource
[ 3.602198] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[ 3.624182] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 3.625988] io scheduler mq-deadline registered
[ 3.626725] io scheduler kyber registered
[ 3.629047] start plist test
[ 3.641420] end plist test
[ 3.717639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.752315] brd: module loaded
[ 3.790207] loop: module loaded
[ 3.793943] mousedev: PS/2 mouse device common for all mice
[ 3.810511] Warning: unable to open an initial console.
[ 3.811923] Freeing unused kernel memory: 88K
[ 3.812558] This architecture does not have kernel memory protection.
[ 3.814280] Run /init as init process
[ 3.814808] with arguments:
[ 3.815227] /init
[ 3.815539] with environment:
[ 3.815924] HOME=/
[ 3.816250] TERM=linux
[ 4.398678] random: dd: uninitialized urandom read (512 bytes read)
> Thanks,
>
> Alex
>
>> I'll take a look at the code later today.
>>
>> Best regards,
>> Â Â Â Vitaly
>>
>>> Thanks,
>>>
>>> Alex
>>>
>>>>
>>>>> Either way, can you point me (either just indicate the old version is
>>>>> OK or send a new one) to what you want me to look at WRT the page
>>>>> table code? IIRC it looked pretty much fine, but I'll take another
>>>>> look ASAP so we can avoid serializing everything.
>>>>
>>>> The v3 is fine for me:
>>>> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
>>>>
>>>>>
>>>>>>
>>>>>> Alex
>>>>>>
>>>>>>>>> Â Â Â Â Â Â Â pfn_base = PFN_DOWN(load_pa);
>>>>>>>>>
>>>>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>> dtb_pa)
>>>>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
>>>>>>>>> Â Â #endif
>>>>>>>>>
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +Â Â Â Â create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (uintptr_t)xip_pmd, PGDIR_SIZE,
>>>>>>>>> PAGE_TABLE);
>>>>>>>>> +Â Â Â Â for (va = XIP_VIRT_ADDR_START;
>>>>>>>>> +Â Â Â Â Â Â Â Â Â va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>>>>> +Â Â Â Â Â Â Â Â Â va += PMD_SIZE) {
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â create_pmd_mapping(xip_pmd, va,
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â xiprom + (va -
>>>>>>>>> XIP_VIRT_ADDR_START),
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â PMD_SIZE, PAGE_KERNEL_EXEC);
>>>>>>>>> +Â Â Â Â }
>>>>>>>>> +
>>>>>>>>> +Â Â Â Â create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (uintptr_t)xip_pmd, PGDIR_SIZE,
>>>>>>>>> PAGE_TABLE);
>>>>>>>>> +#endif
>>>>>>>>> +
>>>>>>>>> Â Â Â Â Â Â Â /*
>>>>>>>>> Â Â Â Â Â Â Â Â * Setup early PGD covering entire kernel which will
>>>>>>>>> allows
>>>>>>>>> Â Â Â Â Â Â Â Â * us to reach paging_init(). We map all memory banks
>>>>>>>>> later
>>>>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>> dtb_pa)
>>>>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
>>>>>>>>> Â Â Â Â Â Â Â dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>>>>> (PMD_SIZE - 1));
>>>>>>>>> Â Â #else /* CONFIG_BUILTIN_DTB */
>>>>>>>>> -Â Â Â Â dtb_early_va = __va(dtb_pa);
>>>>>>>>> +Â Â Â Â dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>>>>> Â Â #endif /* CONFIG_BUILTIN_DTB */
>>>>>>>>> Â Â #else
>>>>>>>>> Â Â #ifndef CONFIG_BUILTIN_DTB
>>>>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>> dtb_pa)
>>>>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pa + PGDIR_SIZE, PGDIR_SIZE,
>>>>>>>>> PAGE_KERNEL);
>>>>>>>>> Â Â Â Â Â Â Â dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>>>>> (PGDIR_SIZE - 1));
>>>>>>>>> Â Â #else /* CONFIG_BUILTIN_DTB */
>>>>>>>>> -Â Â Â Â dtb_early_va = __va(dtb_pa);
>>>>>>>>> +Â Â Â Â dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>>>>> Â Â #endif /* CONFIG_BUILTIN_DTB */
>>>>>>>>> Â Â #endif
>>>>>>>>> Â Â Â Â Â Â Â dtb_early_pa = dtb_pa;
>>>>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
>>>>>>>>> Â Â Â Â Â Â Â uintptr_t va, map_size;
>>>>>>>>> Â Â Â Â Â Â Â phys_addr_t pa, start, end;
>>>>>>>>> Â Â Â Â Â Â Â u64 i;
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +Â Â Â Â uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>>>>> (uintptr_t)(&_xiprom);
>>>>>>>>> +#endif
>>>>>>>>>
>>>>>>>>> Â Â Â Â Â Â Â /**
>>>>>>>>> Â Â Â Â Â Â Â Â * MMU is enabled at this point. But page table setup is
>>>>>>>>> not complete yet.
>>>>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
>>>>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â map_size,
>>>>>>>>> PAGE_KERNEL_EXEC);
>>>>>>>>> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â }
>>>>>>>>> Â Â Â Â Â Â Â }
>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>> +Â Â Â Â map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
>>>>>>>>> +Â Â Â Â for (va = XIP_VIRT_ADDR_START;
>>>>>>>>> +Â Â Â Â Â Â Â Â Â va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>>>>> +Â Â Â Â Â Â Â Â Â va += map_size)
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â create_pgd_mapping(swapper_pg_dir, va,
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â CONFIG_XIP_PHYS_ADDR + (va -
>>>>>>>>> XIP_VIRT_ADDR_START),
>>>>>>>>> +Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â map_size, PAGE_KERNEL_EXEC);
>>>>>>>>> +
>>>>>>>>> +#endif
>>>>>>>>>
>>>>>>>>> Â Â Â Â Â Â Â /* Clear fixmap PTE and PMD mappings */
>>>>>>>>> Â Â Â Â Â Â Â clear_fixmap(FIX_PTE);
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> linux-riscv mailing list
>>>>>>> [email protected]
>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> linux-riscv mailing list
>>>>> [email protected]
>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>
>>>> _______________________________________________
>>>> linux-riscv mailing list
>>>> [email protected]
>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>
>> _______________________________________________
>> linux-riscv mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>
On Sat, Apr 3, 2021 at 12:00 PM Alex Ghiti <[email protected]> wrote:
>
> Hi Vitaly,
>
> Le 4/1/21 à 7:10 AM, Alex Ghiti a écrit :
> > Le 4/1/21 à 4:52 AM, Vitaly Wool a écrit :
> >> Hi Alex,
> >>
> >> On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <[email protected]> wrote:
> >>>
> >>> Hi,
> >>>
> >>> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
> >>>> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
> >>>>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
> >>>>>>
> >>>>>>
> >>>>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
> >>>>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
> >>>>>>> <[email protected]> wrote:
> >>>>>>>>
> >>>>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
> >>>>>>>> wrote:
> >>>>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> >>>>>>>>> It allows code to be executed directly from non-volatile storage
> >>>>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
> >>>>>>>>> be found on many RISC-V platforms. This makes way for significant
> >>>>>>>>> optimization of RAM footprint. The XIP kernel is not compressed
> >>>>>>>>> since it has to run directly from flash, so it will occupy more
> >>>>>>>>> space on the non-volatile storage. The physical flash address used
> >>>>>>>>> to link the kernel object files and for storing it has to be known
> >>>>>>>>> at compile time and is represented by a Kconfig option.
> >>>>>>>>>
> >>>>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
> >>>>>>>>> kernels.
> >>>>>>>>>
> >>>>>>>>> Signed-off-by: Vitaly Wool <[email protected]>
> >>>>>>>>>
> >>>>>>>>> ---
> >>>>>>>>>
> >>>>>>>>> Changes in v2:
> >>>>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled
> >>>>>>>>> yet
> >>>>>>>>> o both for 32-bit and 64-bit RISC-V
> >>>>>>>>> - SP is explicitly set to a safe place in RAM before
> >>>>>>>>> __copy_data call
> >>>>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
> >>>>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> >>>>>>>>> Changes in v3:
> >>>>>>>>> - rebased against latest for-next
> >>>>>>>>> - XIP address fixup macro now takes an argument
> >>>>>>>>> - SMP related fixes
> >>>>>>>>> Changes in v4:
> >>>>>>>>> - rebased against the current for-next
> >>>>>>>>> - less #ifdef's in C/ASM code
> >>>>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> >>>>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
> >>>>>>>>> - Fixed multi-core boot
> >>>>>>>>> Changes in v5:
> >>>>>>>>> - fixed build error for non-XIP kernels
> >>>>>>>>> Changes in v6:
> >>>>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> >>>>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> >>>>>>>>> PHYS_RAM_BASE in non-XIP configurations if needed
> >>>>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid
> >>>>>>>>> side
> >>>>>>>>> effects
> >>>>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
> >>>>>>>>
> >>>>>>>> So v5 landed on for-next, which generally means it's best to avoid
> >>>>>>>> re-spinning the patch and instead send along fixups. That said,
> >>>>>>>> the v5
> >>>>>>>> is causing some testing failures for me.
> >>>>>>>>
> >>>>>>>> I'm going to drop the v5 for now as I don't have time to test this
> >>>>>>>> tonight. I'll try and take a look soon, as it will conflict with
> >>>>>>>> Alex's
> >>>>>>>> patches.
> >>>>>>>
> >>>>>>> I can come up with the incremental patch instead pretty much
> >>>>>>> straight
> >>>>>>> away if that works better.
> >>>>>>>
> >>>>>>> ~Vitaly
> >>>>>>>
> >>>>>>>>> arch/riscv/Kconfig | 49 ++++++++++-
> >>>>>>>>> arch/riscv/Makefile | 8 +-
> >>>>>>>>> arch/riscv/boot/Makefile | 13 +++
> >>>>>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> >>>>>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> >>>>>>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
> >>>>>>>>> arch/riscv/kernel/head.h | 3 +
> >>>>>>>>> arch/riscv/kernel/setup.c | 8 +-
> >>>>>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132
> >>>>>>>>> ++++++++++++++++++++++++++++
> >>>>>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> >>>>>>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> >>>>>>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
> >>>>>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>>
> >>>>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >>>>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
> >>>>>>>>> --- a/arch/riscv/Kconfig
> >>>>>>>>> +++ b/arch/riscv/Kconfig
> >>>>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
> >>>>>>>>>
> >>>>>>>>> config EFI
> >>>>>>>>> bool "UEFI runtime support"
> >>>>>>>>> - depends on OF
> >>>>>>>>> + depends on OF && !XIP_KERNEL
> >>>>>>>>> select LIBFDT
> >>>>>>>>> select UCS2_STRING
> >>>>>>>>> select EFI_PARAMS_FROM_FDT
> >>>>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> >>>>>>>>> def_bool y
> >>>>>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
> >>>>>>>>>
> >>>>>>>>> +config PHYS_RAM_BASE_FIXED
> >>>>>>>>> + bool "Explicitly specified physical RAM address"
> >>>>>>>>> + default n
> >>>>>>>>> +
> >>>>>>>>> +config PHYS_RAM_BASE
> >>>>>>>>> + hex "Platform Physical RAM address"
> >>>>>>>>> + depends on PHYS_RAM_BASE_FIXED
> >>>>>>>>> + default "0x80000000"
> >>>>>>>>> + help
> >>>>>>>>> + This is the physical address of RAM in the system. It has
> >>>>>>>>> to be
> >>>>>>>>> + explicitly specified to run early relocations of
> >>>>>>>>> read-write data
> >>>>>>>>> + from flash to RAM.
> >>>>>>>>> +
> >>>>>>>>> +config XIP_KERNEL
> >>>>>>>>> + bool "Kernel Execute-In-Place from ROM"
> >>>>>>>>> + depends on MMU
> >>>>>>>>> + select PHYS_RAM_BASE_FIXED
> >>>>>>>>> + help
> >>>>>>>>> + Execute-In-Place allows the kernel to run from
> >>>>>>>>> non-volatile storage
> >>>>>>>>> + directly addressable by the CPU, such as NOR flash. This
> >>>>>>>>> saves RAM
> >>>>>>>>> + space since the text section of the kernel is not loaded
> >>>>>>>>> from flash
> >>>>>>>>> + to RAM. Read-write sections, such as the data section and
> >>>>>>>>> stack,
> >>>>>>>>> + are still copied to RAM. The XIP kernel is not compressed
> >>>>>>>>> since
> >>>>>>>>> + it has to run directly from flash, so it will take more
> >>>>>>>>> space to
> >>>>>>>>> + store it. The flash address used to link the kernel
> >>>>>>>>> object files,
> >>>>>>>>> + and for storing it, is configuration dependent. Therefore,
> >>>>>>>>> if you
> >>>>>>>>> + say Y here, you must know the proper physical address
> >>>>>>>>> where to
> >>>>>>>>> + store the kernel image depending on your own flash memory
> >>>>>>>>> usage.
> >>>>>>>>> +
> >>>>>>>>> + Also note that the make target becomes "make xipImage"
> >>>>>>>>> rather than
> >>>>>>>>> + "make zImage" or "make Image". The final kernel binary to
> >>>>>>>>> put in
> >>>>>>>>> + ROM memory will be arch/riscv/boot/xipImage.
> >>>>>>>>> +
> >>>>>>>>> + If unsure, say N.
> >>>>>>>>> +
> >>>>>>>>> +config XIP_PHYS_ADDR
> >>>>>>>>> + hex "XIP Kernel Physical Location"
> >>>>>>>>> + depends on XIP_KERNEL
> >>>>>>>>> + default "0x21000000"
> >>>>>>>>> + help
> >>>>>>>>> + This is the physical address in your flash memory the
> >>>>>>>>> kernel will
> >>>>>>>>> + be linked for and stored to. This address is dependent on
> >>>>>>>>> your
> >>>>>>>>> + own flash usage.
> >>>>>>>>> +
> >>>>>>>>> endmenu
> >>>>>>>>>
> >>>>>>>>> config BUILTIN_DTB
> >>>>>>>>> - def_bool n
> >>>>>>>>> + bool
> >>>>>>>>> depends on OF
> >>>>>>>>> + default y if XIP_KERNEL
> >>>>>>>>>
> >>>>>>>>> menu "Power management options"
> >>>>>>>>>
> >>>>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> >>>>>>>>> index 1368d943f1f3..8fcbec03974d 100644
> >>>>>>>>> --- a/arch/riscv/Makefile
> >>>>>>>>> +++ b/arch/riscv/Makefile
> >>>>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >>>>>>>>>
> >>>>>>>>> # Default target when executing plain make
> >>>>>>>>> boot := arch/riscv/boot
> >>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>>>>> +KBUILD_IMAGE := $(boot)/xipImage
> >>>>>>>>> +else
> >>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>>>>> +endif
> >>>>>>>>>
> >>>>>>>>> head-y := arch/riscv/kernel/head.o
> >>>>>>>>>
> >>>>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
> >>>>>>>>> vdso_install:
> >>>>>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> >>>>>>>>>
> >>>>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
> >>>>>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> >>>>>>>>> KBUILD_IMAGE := $(boot)/loader.bin
> >>>>>>>>> else
> >>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>>>>> endif
> >>>>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
> >>>>>>>>> +endif
> >>>>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> >>>>>>>>>
> >>>>>>>>> all: $(notdir $(KBUILD_IMAGE))
> >>>>>>>>>
> >>>>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> >>>>>>>>> index 03404c84f971..6bf299f70c27 100644
> >>>>>>>>> --- a/arch/riscv/boot/Makefile
> >>>>>>>>> +++ b/arch/riscv/boot/Makefile
> >>>>>>>>> @@ -17,8 +17,21 @@
> >>>>>>>>> KCOV_INSTRUMENT := n
> >>>>>>>>>
> >>>>>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R
> >>>>>>>>> .note.gnu.build-id -R
> >>>>>>>>> .comment -S
> >>>>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
> >>>>>>>>> -R .comment -S
> >>>>>>>>>
> >>>>>>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>>>>> xipImage
> >>>>>>>>> +
> >>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>>>>> +
> >>>>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> >>>>>>>>> +cmd_mkxip = $(cmd_objcopy)
> >>>>>>>>> +
> >>>>>>>>> +$(obj)/xipImage: vmlinux FORCE
> >>>>>>>>> + $(call if_changed,mkxip)
> >>>>>>>>> + @$(kecho) ' Physical Address of xipImage:
> >>>>>>>>> $(CONFIG_XIP_PHYS_ADDR)'
> >>>>>>>>> +
> >>>>>>>>> +endif
> >>>>>>>>>
> >>>>>>>>> $(obj)/Image: vmlinux FORCE
> >>>>>>>>> $(call if_changed,objcopy)
> >>>>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
> >>>>>>>>> b/arch/riscv/include/asm/pgtable.h
> >>>>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
> >>>>>>>>> --- a/arch/riscv/include/asm/pgtable.h
> >>>>>>>>> +++ b/arch/riscv/include/asm/pgtable.h
> >>>>>>>>> @@ -11,6 +11,33 @@
> >>>>>>>>>
> >>>>>>>>> #include <asm/pgtable-bits.h>
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_MMU
> >>>>>>>>> +
> >>>>>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>>>>> +
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> >>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> >>>>>>>>> +
> >>>>>>>>> +#define XIP_OFFSET SZ_8M
> >>>>>>>>> +#define XIP_MASK (SZ_8M - 1)
> >>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) \
> >>>>>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> >>>>>>>>> +
> >>>>>>>>> +#else
> >>>>>>>>> +
> >>>>>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>>>>> +
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>> +
> >>>>>>>>> +#else
> >>>>>>>>> +
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>> +#endif /* CONFIG_MMU */
> >>>>>>>>> +
> >>>>>>>>> #ifndef __ASSEMBLY__
> >>>>>>>>>
> >>>>>>>>> /* Page Upper Directory not used in RISC-V */
> >>>>>>>>> @@ -21,9 +48,25 @@
> >>>>>>>>>
> >>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>
> >>>>>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +/*
> >>>>>>>>> + * Since we use sections to map it, this macro replaces the
> >>>>>>>>> physical address
> >>>>>>>>> + * with its virtual address while keeping offset from the base
> >>>>>>>>> section.
> >>>>>>>>> + */
> >>>>>>>>> +#define XIP_PHYS_ADDR(va) \
> >>>>>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
> >>>>>>>>> CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>> +
> >>>>>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>> +
> >>>>>>>>> +#define XIP_FIXUP(addr) ({ \
> >>>>>>>>> + uintptr_t __a = (uintptr_t)(addr); \
> >>>>>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
> >>>>>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> >>>>>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
> >>>>>>>>> XIP_OFFSET : __a; \
> >>>>>>>>> +})
> >>>>>>>>> +#else
> >>>>>>>>> +#define XIP_FIXUP(addr) (addr)
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>
> >>>>>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
> >>>>>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET -
> >>>>>>>>> BPF_JIT_REGION_SIZE)
> >>>>>>>>> @@ -484,8 +527,20 @@ static inline int
> >>>>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
> >>>>>>>>>
> >>>>>>>>> #define kern_addr_valid(addr) (1) /* FIXME */
> >>>>>>>>>
> >>>>>>>>> -extern void *dtb_early_va;
> >>>>>>>>> -extern uintptr_t dtb_early_pa;
> >>>>>>>>> +extern void *_dtb_early_va;
> >>>>>>>>> +extern uintptr_t _dtb_early_pa;
> >>>>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> >>>>>>>>> +
> >>>>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> >>>>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> >>>>>>>>> +
> >>>>>>>>> +#else
> >>>>>>>>> +
> >>>>>>>>> +#define dtb_early_va _dtb_early_va
> >>>>>>>>> +#define dtb_early_pa _dtb_early_pa
> >>>>>>>>> +
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>> +
> >>>>>>>>> void setup_bootmem(void);
> >>>>>>>>> void paging_init(void);
> >>>>>>>>> void misc_mem_init(void);
> >>>>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>> index 685fae72b7f5..2413c2997350 100644
> >>>>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
> >>>>>>>>> long hartid)
> >>>>>>>>> }
> >>>>>>>>> #endif
> >>>>>>>>>
> >>>>>>>>> +static inline unsigned long get_secondary_start_phys(void)
> >>>>>>>>> +{
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
> >>>>>>>>> +#else
> >>>>>>>>> + return __pa_symbol(secondary_start_sbi);
> >>>>>>>>> +#endif
> >>>>>>>>> +}
> >>>>>>>>> +
> >>>>>>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct
> >>>>>>>>> *tidle)
> >>>>>>>>> {
> >>>>>>>>> int rc;
> >>>>>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> >>>>>>>>> + unsigned long boot_addr = get_secondary_start_phys();
> >>>>>>>>> int hartid = cpuid_to_hartid_map(cpuid);
> >>>>>>>>>
> >>>>>>>>> cpu_update_secondary_bootdata(cpuid, tidle);
> >>>>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> >>>>>>>>> index f5a9bad86e58..bbe74e37914f 100644
> >>>>>>>>> --- a/arch/riscv/kernel/head.S
> >>>>>>>>> +++ b/arch/riscv/kernel/head.S
> >>>>>>>>> @@ -9,11 +9,23 @@
> >>>>>>>>> #include <linux/linkage.h>
> >>>>>>>>> #include <asm/thread_info.h>
> >>>>>>>>> #include <asm/page.h>
> >>>>>>>>> +#include <asm/pgtable.h>
> >>>>>>>>> #include <asm/csr.h>
> >>>>>>>>> #include <asm/hwcap.h>
> >>>>>>>>> #include <asm/image.h>
> >>>>>>>>> #include "efi-header.S"
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>>>>> + REG_L t0, _xip_fixup
> >>>>>>>>> + add \reg, \reg, t0
> >>>>>>>>> +.endm
> >>>>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
> >>>>>>>>> XIP_OFFSET
> >>>>>>>>> +#else
> >>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>>>>> +.endm
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>> +
> >>>>>>>>> __HEAD
> >>>>>>>>> ENTRY(_start)
> >>>>>>>>> /*
> >>>>>>>>> @@ -69,7 +81,11 @@ pe_head_start:
> >>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>> relocate:
> >>>>>>>>> /* Relocate return address */
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>> +#else
> >>>>>>>>> li a1, PAGE_OFFSET
> >>>>>>>>> +#endif
> >>>>>>>>> la a2, _start
> >>>>>>>>> sub a1, a1, a2
> >>>>>>>>> add ra, ra, a1
> >>>>>>>>> @@ -91,6 +107,7 @@ relocate:
> >>>>>>>>> * to ensure the new translations are in use.
> >>>>>>>>> */
> >>>>>>>>> la a0, trampoline_pg_dir
> >>>>>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>>>>> srl a0, a0, PAGE_SHIFT
> >>>>>>>>> or a0, a0, a1
> >>>>>>>>> sfence.vma
> >>>>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
> >>>>>>>>>
> >>>>>>>>> slli a3, a0, LGREG
> >>>>>>>>> la a4, __cpu_up_stack_pointer
> >>>>>>>>> + XIP_FIXUP_OFFSET a4
> >>>>>>>>> la a5, __cpu_up_task_pointer
> >>>>>>>>> + XIP_FIXUP_OFFSET a5
> >>>>>>>>> add a4, a3, a4
> >>>>>>>>> add a5, a3, a5
> >>>>>>>>> REG_L sp, (a4)
> >>>>>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
> >>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>> /* Enable virtual memory and relocate to virtual
> >>>>>>>>> address */
> >>>>>>>>> la a0, swapper_pg_dir
> >>>>>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>>>>> call relocate
> >>>>>>>>> #endif
> >>>>>>>>> call setup_trap_vector
> >>>>>>>>> @@ -236,12 +256,33 @@ pmp_done:
> >>>>>>>>> .Lgood_cores:
> >>>>>>>>> #endif
> >>>>>>>>>
> >>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>>>>> /* Pick one hart to run the main boot sequence */
> >>>>>>>>> la a3, hart_lottery
> >>>>>>>>> li a2, 1
> >>>>>>>>> amoadd.w a3, a2, (a3)
> >>>>>>>>> bnez a3, .Lsecondary_start
> >>>>>>>>>
> >>>>>>>>> +#else
> >>>>>>>>> + /* hart_lottery in flash contains a magic number */
> >>>>>>>>> + la a3, hart_lottery
> >>>>>>>>> + mv a2, a3
> >>>>>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>>>>> + lw t1, (a3)
> >>>>>>>>> + amoswap.w t0, t1, (a2)
> >>>>>>>>> + /* first time here if hart_lottery in RAM is not set */
> >>>>>>>>> + beq t0, t1, .Lsecondary_start
> >>>>>>>>> +
> >>>>>>>>> + la sp, _end + THREAD_SIZE
> >>>>>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>>>>> + mv s0, a0
> >>>>>>>>> + call __copy_data
> >>>>>>>>> +
> >>>>>>>>> + /* Restore a0 copy */
> >>>>>>>>> + mv a0, s0
> >>>>>>>>> +#endif
> >>>>>>>>> +
> >>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>>>>> /* Clear BSS for flat non-ELF images */
> >>>>>>>>> la a3, __bss_start
> >>>>>>>>> la a4, __bss_stop
> >>>>>>>>> @@ -251,15 +292,18 @@ clear_bss:
> >>>>>>>>> add a3, a3, RISCV_SZPTR
> >>>>>>>>> blt a3, a4, clear_bss
> >>>>>>>>> clear_bss_done:
> >>>>>>>>> -
> >>>>>>>>> +#endif
> >>>>>>>>> /* Save hart ID and DTB physical address */
> >>>>>>>>> mv s0, a0
> >>>>>>>>> mv s1, a1
> >>>>>>>>> +
> >>>>>>>>> la a2, boot_cpu_hartid
> >>>>>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>>>>> REG_S a0, (a2)
> >>>>>>>>>
> >>>>>>>>> /* Initialize page tables and relocate to virtual
> >>>>>>>>> addresses */
> >>>>>>>>> la sp, init_thread_union + THREAD_SIZE
> >>>>>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>>>>> #ifdef CONFIG_BUILTIN_DTB
> >>>>>>>>> la a0, __dtb_start
> >>>>>>>>> #else
> >>>>>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
> >>>>>>>>> call setup_vm
> >>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>> la a0, early_pg_dir
> >>>>>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>>>>> call relocate
> >>>>>>>>> #endif /* CONFIG_MMU */
> >>>>>>>>>
> >>>>>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
> >>>>>>>>>
> >>>>>>>>> slli a3, a0, LGREG
> >>>>>>>>> la a1, __cpu_up_stack_pointer
> >>>>>>>>> + XIP_FIXUP_OFFSET a1
> >>>>>>>>> la a2, __cpu_up_task_pointer
> >>>>>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>>>>> add a1, a3, a1
> >>>>>>>>> add a2, a3, a2
> >>>>>>>>>
> >>>>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> >>>>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
> >>>>>>>>> --- a/arch/riscv/kernel/head.h
> >>>>>>>>> +++ b/arch/riscv/kernel/head.h
> >>>>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> >>>>>>>>>
> >>>>>>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
> >>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +asmlinkage void __init __copy_data(void);
> >>>>>>>>> +#endif
> >>>>>>>>>
> >>>>>>>>> extern void *__cpu_up_stack_pointer[];
> >>>>>>>>> extern void *__cpu_up_task_pointer[];
> >>>>>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> >>>>>>>>> index e85bacff1b50..a0384c72c272 100644
> >>>>>>>>> --- a/arch/riscv/kernel/setup.c
> >>>>>>>>> +++ b/arch/riscv/kernel/setup.c
> >>>>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
> >>>>>>>>> __section(".data") = {
> >>>>>>>>> * This is used before the kernel initializes the BSS so it
> >>>>>>>>> can't be in the
> >>>>>>>>> * BSS.
> >>>>>>>>> */
> >>>>>>>>> -atomic_t hart_lottery __section(".sdata");
> >>>>>>>>> +atomic_t hart_lottery __section(".sdata")
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> += ATOMIC_INIT(0xC001BEEF)
> >>>>>>>>> +#endif
> >>>>>>>>> +;
> >>>>>>>>> unsigned long boot_cpu_hartid;
> >>>>>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
> >>>>>>>>>
> >>>>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> >>>>>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> >>>>>>>>> unflatten_and_copy_device_tree();
> >>>>>>>>> #else
> >>>>>>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
> >>>>>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> >>>>>>>>> unflatten_device_tree();
> >>>>>>>>> else
> >>>>>>>>> pr_err("No DTB found in kernel mappings\n");
> >>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>> new file mode 100644
> >>>>>>>>> index 000000000000..9f0f08c34cd3
> >>>>>>>>> --- /dev/null
> >>>>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>> @@ -0,0 +1,132 @@
> >>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
> >>>>>>>>> +/*
> >>>>>>>>> + * Copyright (C) 2012 Regents of the University of California
> >>>>>>>>> + * Copyright (C) 2017 SiFive
> >>>>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> >>>>>>>>> + */
> >>>>>>>>> +
> >>>>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>> +/* No __ro_after_init data in the .rodata section - which will
> >>>>>>>>> always be ro */
> >>>>>>>>> +#define RO_AFTER_INIT_DATA
> >>>>>>>>> +
> >>>>>>>>> +#include <asm/vmlinux.lds.h>
> >>>>>>>>> +#include <asm/page.h>
> >>>>>>>>> +#include <asm/pgtable.h>
> >>>>>>>>> +#include <asm/cache.h>
> >>>>>>>>> +#include <asm/thread_info.h>
> >>>>>>>>> +
> >>>>>>>>> +OUTPUT_ARCH(riscv)
> >>>>>>>>> +ENTRY(_start)
> >>>>>>>>> +
> >>>>>>>>> +jiffies = jiffies_64;
> >>>>>>>>> +
> >>>>>>>>> +SECTIONS
> >>>>>>>>> +{
> >>>>>>>>> + /* Beginning of code and text segment */
> >>>>>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> >>>>>>>>> + _xiprom = .;
> >>>>>>>>> + _start = .;
> >>>>>>>>> + HEAD_TEXT_SECTION
> >>>>>>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
> >>>>>>>>> + /* we have to discard exit text and such at runtime, not
> >>>>>>>>> link time */
> >>>>>>>>> + .exit.text :
> >>>>>>>>> + {
> >>>>>>>>> + EXIT_TEXT
> >>>>>>>>> + }
> >>>>>>>>> +
> >>>>>>>>> + .text : {
> >>>>>>>>> + _text = .;
> >>>>>>>>> + _stext = .;
> >>>>>>>>> + TEXT_TEXT
> >>>>>>>>> + SCHED_TEXT
> >>>>>>>>> + CPUIDLE_TEXT
> >>>>>>>>> + LOCK_TEXT
> >>>>>>>>> + KPROBES_TEXT
> >>>>>>>>> + ENTRY_TEXT
> >>>>>>>>> + IRQENTRY_TEXT
> >>>>>>>>> + SOFTIRQENTRY_TEXT
> >>>>>>>>> + *(.fixup)
> >>>>>>>>> + _etext = .;
> >>>>>>>>> + }
> >>>>>>>>> + RO_DATA(L1_CACHE_BYTES)
> >>>>>>>>> + .srodata : {
> >>>>>>>>> + *(.srodata*)
> >>>>>>>>> + }
> >>>>>>>>> + .init.rodata : {
> >>>>>>>>> + INIT_SETUP(16)
> >>>>>>>>> + INIT_CALLS
> >>>>>>>>> + CON_INITCALL
> >>>>>>>>> + INIT_RAM_FS
> >>>>>>>>> + }
> >>>>>>>>> + _exiprom = .; /* End of XIP ROM area */
> >>>>>>>>> +
> >>>>>>>>> +
> >>>>>>>>> +/*
> >>>>>>>>> + * From this point, stuff is considered writable and will be
> >>>>>>>>> copied to RAM
> >>>>>>>>> + */
> >>>>>>>>> + __data_loc = ALIGN(16); /* location in file */
> >>>>>>>>> + . = PAGE_OFFSET; /* location in memory */
> >>>>>>>>> +
> >>>>>>>>> + _sdata = .; /* Start of data section */
> >>>>>>>>> + _data = .;
> >>>>>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> >>>>>>>>> + _edata = .;
> >>>>>>>>> + __start_ro_after_init = .;
> >>>>>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
> >>>>>>>>> LOAD_OFFSET) {
> >>>>>>>>> + *(.data..ro_after_init)
> >>>>>>>>> + }
> >>>>>>>>> + __end_ro_after_init = .;
> >>>>>>>>> +
> >>>>>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>>>>> + __init_begin = .;
> >>>>>>>>> + .init.data : {
> >>>>>>>>> + INIT_DATA
> >>>>>>>>> + }
> >>>>>>>>> + .exit.data : {
> >>>>>>>>> + EXIT_DATA
> >>>>>>>>> + }
> >>>>>>>>> + . = ALIGN(8);
> >>>>>>>>> + __soc_early_init_table : {
> >>>>>>>>> + __soc_early_init_table_start = .;
> >>>>>>>>> + KEEP(*(__soc_early_init_table))
> >>>>>>>>> + __soc_early_init_table_end = .;
> >>>>>>>>> + }
> >>>>>>>>> + __soc_builtin_dtb_table : {
> >>>>>>>>> + __soc_builtin_dtb_table_start = .;
> >>>>>>>>> + KEEP(*(__soc_builtin_dtb_table))
> >>>>>>>>> + __soc_builtin_dtb_table_end = .;
> >>>>>>>>> + }
> >>>>>>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
> >>>>>>>>> +
> >>>>>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>>>>> + __init_end = .;
> >>>>>>>>> +
> >>>>>>>>> + .sdata : {
> >>>>>>>>> + __global_pointer$ = . + 0x800;
> >>>>>>>>> + *(.sdata*)
> >>>>>>>>> + *(.sbss*)
> >>>>>>>>> + }
> >>>>>>>>> +
> >>>>>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> >>>>>>>>> + EXCEPTION_TABLE(0x10)
> >>>>>>>>> +
> >>>>>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> >>>>>>>>> + *(.rel.dyn*)
> >>>>>>>>> + }
> >>>>>>>>> +
> >>>>>>>>> + /*
> >>>>>>>>> + * End of copied data. We need a dummy section to get its
> >>>>>>>>> LMA.
> >>>>>>>>> + * Also located before final ALIGN() as trailing padding is
> >>>>>>>>> not stored
> >>>>>>>>> + * in the resulting binary file and useless to copy.
> >>>>>>>>> + */
> >>>>>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> >>>>>>>>> + _edata_loc = LOADADDR(.data.endmark);
> >>>>>>>>> +
> >>>>>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>>>>> + _end = .;
> >>>>>>>>> +
> >>>>>>>>> + STABS_DEBUG
> >>>>>>>>> + DWARF_DEBUG
> >>>>>>>>> +
> >>>>>>>>> + DISCARDS
> >>>>>>>>> +}
> >>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>> b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>> index de03cb22d0e9..6745ec325930 100644
> >>>>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>> @@ -4,7 +4,12 @@
> >>>>>>>>> * Copyright (C) 2017 SiFive
> >>>>>>>>> */
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +#include "vmlinux-xip.lds.S"
> >>>>>>>>> +#else
> >>>>>>>>> +
> >>>>>>>>> #define LOAD_OFFSET PAGE_OFFSET
> >>>>>>>>> +
> >>>>>>>>> #include <asm/vmlinux.lds.h>
> >>>>>>>>> #include <asm/page.h>
> >>>>>>>>> #include <asm/cache.h>
> >>>>>>>>> @@ -132,3 +137,4 @@ SECTIONS
> >>>>>>>>>
> >>>>>>>>> DISCARDS
> >>>>>>>>> }
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> >>>>>>>>> index 7f5036fbee8c..efe649d41f95 100644
> >>>>>>>>> --- a/arch/riscv/mm/init.c
> >>>>>>>>> +++ b/arch/riscv/mm/init.c
> >>>>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >>>>>>>>>
> >>>>>>>>> extern char _start[];
> >>>>>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> >>>>>>>>> -void *dtb_early_va __initdata;
> >>>>>>>>> -uintptr_t dtb_early_pa __initdata;
> >>>>>>>>> +void *_dtb_early_va __initdata;
> >>>>>>>>> +uintptr_t _dtb_early_pa __initdata;
> >>>>>>>>>
> >>>>>>>>> struct pt_alloc_ops {
> >>>>>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
> >>>>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> >>>>>>>>> (unsigned long)VMALLOC_END);
> >>>>>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> >>>>>>>>> (unsigned long)high_memory);
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> >>>>>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>> }
> >>>>>>>>> #else
> >>>>>>>>> static void print_vm_layout(void) { }
> >>>>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> >>>>>>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
> >>>>>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> + vmlinux_start = __pa_symbol(&_sdata);
> >>>>>>>>> +#endif
> >>>>>>>>> +
> >>>>>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
> >>>>>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
> >>>>>>>>>
> >>>>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> >>>>>>>>> memblock_allow_resize();
> >>>>>>>>> }
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +
> >>>>>>>>> +extern char _xiprom[], _exiprom[];
> >>>>>>>>> +extern char _sdata[], _edata[];
> >>>>>>>>> +
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>> +
> >>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>> -static struct pt_alloc_ops pt_ops;
> >>>>>>>>> +static struct pt_alloc_ops _pt_ops;
> >>>>>>>>> +
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> >>>>>>>>> +#else
> >>>>>>>>> +#define pt_ops _pt_ops
> >>>>>>>>> +#endif
> >>>>>>>>>
> >>>>>>>>> unsigned long va_pa_offset;
> >>>>>>>>> EXPORT_SYMBOL(va_pa_offset);
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +#define va_pa_offset (*((unsigned long
> >>>>>>>>> *)XIP_FIXUP(&va_pa_offset)))
> >>>>>>>>> +#endif
> >>>>>>>>> unsigned long pfn_base;
> >>>>>>>>> EXPORT_SYMBOL(pfn_base);
> >>>>>>>>>
> >>>>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
> >>>>>>>>> __page_aligned_bss;
> >>>>>>>>>
> >>>>>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata
> >>>>>>>>> __aligned(PAGE_SIZE);
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +#define trampoline_pg_dir ((pgd_t
> >>>>>>>>> *)XIP_FIXUP(trampoline_pg_dir))
> >>>>>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> >>>>>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>> +
> >>>>>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
> >>>>>>>>> pgprot_t prot)
> >>>>>>>>> {
> >>>>>>>>> unsigned long addr = __fix_to_virt(idx);
> >>>>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
> >>>>>>>>> __page_aligned_bss;
> >>>>>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >>>>>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata
> >>>>>>>>> __aligned(PAGE_SIZE);
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> >>>>>>>>> +
> >>>>>>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> >>>>>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> >>>>>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> >>>>>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>> +
> >>>>>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> >>>>>>>>> {
> >>>>>>>>> /* Before MMU is enabled */
> >>>>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
> >>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>>>>> return PMD_SIZE;
> >>>>>>>>> }
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> +/* called from head.S with MMU off */
> >>>>>>>>> +asmlinkage void __init __copy_data(void)
> >>>>>>>>> +{
> >>>>>>>>> + void *from = (void *)(&_sdata);
> >>>>>>>>> + void *end = (void *)(&_end);
> >>>>>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> >>>>>>>>> + size_t sz = (size_t)(end - from);
> >>>>>>>>> +
> >>>>>>>>> + memcpy(to, from, sz);
> >>>>>>>>> +}
> >>>>>>>>> +#endif
> >>>>>>>>> +
> >>>>>>>>> /*
> >>>>>>>>> * setup_vm() is called from head.S with MMU-off.
> >>>>>>>>> *
> >>>>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
> >>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>>>>>
> >>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>>>>>>>> {
> >>>>>>>>> - uintptr_t va, pa, end_va;
> >>>>>>>>> + uintptr_t va, end_va;
> >>>>>>>>> + uintptr_t __maybe_unused pa;
> >>>>>>>>> uintptr_t load_pa = (uintptr_t)(&_start);
> >>>>>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> >>>>>>>>> uintptr_t map_size;
> >>>>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>> dtb_pa)
> >>>>>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> >>>>>>>>> #endif
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> >>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>>>>> (uintptr_t)(&_xiprom);
> >>>>>>>>> +
> >>>>>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> >>>>>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> >>>>>>>>> +#endif
> >>>>>>>>> va_pa_offset = PAGE_OFFSET - load_pa;
> >>>>>>
> >>>>>> I should have seen this before, I was too focused on having a XIP
> >>>>>> kernel
> >>>>>> boot. I already moved the kernel mapping in the vmalloc zone: the
> >>>>>> virtual to physical translations need to be handled differently
> >>>>>> now that
> >>>>>> the kernel mapping does not lie into linear mapping anymore, we can't
> >>>>>> use va_pa_offset defined above for both mappings.
> >>>>>>
> >>>>>> I was rebasing my patchset on the XIP patch but I believe that
> >>>>>> doing the
> >>>>>> other way around would greatly simplify the XIP patch as the kernel
> >>>>>> mapping would already be moved outside the linear mapping, there
> >>>>>> would
> >>>>>> be no need to reserve a zone in vmalloc anymore (that simplifies
> >>>>>> pgtable.h quite a lot). And the XIP kernel mapping could be
> >>>>>> implemented
> >>>>>> in a new create_kernel_page_table (that would also simplify
> >>>>>> mm/init.c).
> >>>>>>
> >>>>>> I can help to do that but I don't think we should merge this patch
> >>>>>> as is
> >>>>>> now.
> >>>>>
> >>>>> I think that's the right way to go for now: it's a lot harder to test
> >>>>> the XIP stuff, as it requires a bunch of harness changes. So let's
> >>>>> take the page table refactoring in now and rebase this stuff on top of
> >>>>> it. There's really no way to do both without making more work for
> >>>>> someone, it's just a headache on timing.
> >>>>>
> >>>>> Alex: if you want to sign up to spend some time there that'd be great,
> >>>>> otherwise I will.
> >>>>
> >>>> I can take care of that, no problem.
> >>>
> >>> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
> >>> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my
> >>> setup.
> >>>
> >>> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
> >>> any other kernel at the end of the address space, not in the vmalloc
> >>> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
> >>> pfn_valid, copy_data and other stuff).
> >>>
> >>> Any comment is welcome !
> >>
> >> thanks for your efforts!
> >>
> >> I've just built your version. The build went well, but the image
> >> doesn't seem to boot for me.
> >
> > Too bad. Can you give me your config please ?
> >
>
> Apparently, as you can see below, your config works for me, at least it
> reaches userspace. Do you have traces or more info about what is wrong ?
Console output is just the same but it stops after the following line:
[ 0.003208] Console: colour dummy device 80x25
I did some very simplistic debugging bisecting start_kernel()
execution and I could see that setup_per_cpu_pageset() was reached
while calibrate_delay() was not.
How (and whether) this might be related to XIP I don't know :)
Best regards,
Vitaly
> Thanks!
>
> [ 0.000000] Linux version 5.12.0-rc2 (alex@debian)
> (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.11.2) 9.3.0,
> GNU ld (GNU Binutils) 2.34) #322 SMP Sat Apr 3 05:50:18 EDT 2021
> [ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit
> [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
> [ 0.000000] printk: bootconsole [sbi0] enabled
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff]
> [ 0.000000] Normal empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff]
> [ 0.000000] Initmem setup node 0 [mem
> 0x0000000080000000-0x00000000bfffffff]
> [ 0.000000] On node 0 totalpages: 262144
> [ 0.000000] DMA32 zone: 3584 pages used for memmap
> [ 0.000000] DMA32 zone: 0 pages reserved
> [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
> [ 0.000000] SBI specification v0.2 detected
> [ 0.000000] SBI implementation ID=0x1 Version=0x6
> [ 0.000000] SBI v0.2 TIME extension detected
> [ 0.000000] SBI v0.2 IPI extension detected
> [ 0.000000] SBI v0.2 RFENCE extension detected
> [ 0.000000] software IO TLB: mapped [mem
> 0x00000000b9e00000-0x00000000bde00000] (64MB)
> [ 0.000000] CPU with hartid=0 is not available
> [ 0.000000] CPU with hartid=0 is not available
> [ 0.000000] riscv: ISA extensions acdfim
> [ 0.000000] riscv: ELF capabilities acdfim
> [ 0.000000] percpu: Embedded 17 pages/cpu s29856 r8192 d31584 u69632
> [ 0.000000] pcpu-alloc: s29856 r8192 d31584 u69632 alloc=17*4096
> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258560
> [ 0.000000] Kernel command line: earlyprintk debug earlycon=sbi
> console=ttyS0,115200n8 root=/dev/ram0 init=/sbin/init
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 8,
> 1048576 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288
> bytes, linear)
> [ 0.000000] Sorting __ex_table...
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] Memory: 947732K/1048576K available (2999K kernel code,
> 692K rwdata, 953K rodata, 205K init, 247K bss, 100844K reserved, 0K
> cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] rcu: Hierarchical RCU implementation.
> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> [ 0.000000] rcu: RCU debug extended QS entry/exit.
> [ 0.000000] Tracing variant of Tasks RCU enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> is 25 jiffies.
> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> [ 0.000000] CPU with hartid=0 is not available
> [ 0.000000] riscv-intc: unable to find hart id for
> /cpus/cpu@0/interrupt-controller
> [ 0.000000] riscv-intc: 64 local interrupts mapped
> [ 0.000000] plic: interrupt-controller@c000000: mapped 186 interrupts
> with 4 handlers for 9 contexts.
> [ 0.000000] random: get_random_bytes called from
> start_kernel+0x2fe/0x49c with crng_init=0
> [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0]
> hartid [1]
> [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff
> max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
> [ 0.000146] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps
> every 2199023255500ns
> [ 0.006056] Console: colour dummy device 80x25
> [ 0.015242] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 2.00 BogoMIPS (lpj=4000)
> [ 0.017130] pid_max: default: 32768 minimum: 301
> [ 0.020115] Mount-cache hash table entries: 2048 (order: 2, 16384
> bytes, linear)
> [ 0.021097] Mountpoint-cache hash table entries: 2048 (order: 2,
> 16384 bytes, linear)
> [ 0.078755] ASID allocator using 16 bits (65536 entries)
> [ 0.083669] rcu: Hierarchical SRCU implementation.
> [ 0.093304] smp: Bringing up secondary CPUs ...
> [ 1.149900] CPU1: failed to come online
> [ 2.204183] CPU2: failed to come online
> [ 3.256211] CPU3: failed to come online
> [ 3.257043] smp: Brought up 1 node, 1 CPU
> [ 3.269554] devtmpfs: initialized
> [ 3.282015] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 7645041785100000 ns
> [ 3.283484] futex hash table entries: 1024 (order: 4, 65536 bytes,
> linear)
> [ 3.381718] SCSI subsystem initialized
> [ 3.385115] clocksource: Switched to clocksource riscv_clocksource
> [ 3.602198] workingset: timestamp_bits=62 max_order=18 bucket_order=0
> [ 3.624182] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 253)
> [ 3.625988] io scheduler mq-deadline registered
> [ 3.626725] io scheduler kyber registered
> [ 3.629047] start plist test
> [ 3.641420] end plist test
> [ 3.717639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 3.752315] brd: module loaded
> [ 3.790207] loop: module loaded
> [ 3.793943] mousedev: PS/2 mouse device common for all mice
> [ 3.810511] Warning: unable to open an initial console.
> [ 3.811923] Freeing unused kernel memory: 88K
> [ 3.812558] This architecture does not have kernel memory protection.
> [ 3.814280] Run /init as init process
> [ 3.814808] with arguments:
> [ 3.815227] /init
> [ 3.815539] with environment:
> [ 3.815924] HOME=/
> [ 3.816250] TERM=linux
> [ 4.398678] random: dd: uninitialized urandom read (512 bytes read)
>
>
> > Thanks,
> >
> > Alex
> >
> >> I'll take a look at the code later today.
> >>
> >> Best regards,
> >> Vitaly
> >>
> >>> Thanks,
> >>>
> >>> Alex
> >>>
> >>>>
> >>>>> Either way, can you point me (either just indicate the old version is
> >>>>> OK or send a new one) to what you want me to look at WRT the page
> >>>>> table code? IIRC it looked pretty much fine, but I'll take another
> >>>>> look ASAP so we can avoid serializing everything.
> >>>>
> >>>> The v3 is fine for me:
> >>>> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
> >>>>
> >>>>>
> >>>>>>
> >>>>>> Alex
> >>>>>>
> >>>>>>>>> pfn_base = PFN_DOWN(load_pa);
> >>>>>>>>>
> >>>>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>> dtb_pa)
> >>>>>>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> >>>>>>>>> #endif
> >>>>>>>>>
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
> >>>>>>>>> PAGE_TABLE);
> >>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>>>>> + va += PMD_SIZE) {
> >>>>>>>>> + create_pmd_mapping(xip_pmd, va,
> >>>>>>>>> + xiprom + (va -
> >>>>>>>>> XIP_VIRT_ADDR_START),
> >>>>>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
> >>>>>>>>> + }
> >>>>>>>>> +
> >>>>>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
> >>>>>>>>> PAGE_TABLE);
> >>>>>>>>> +#endif
> >>>>>>>>> +
> >>>>>>>>> /*
> >>>>>>>>> * Setup early PGD covering entire kernel which will
> >>>>>>>>> allows
> >>>>>>>>> * us to reach paging_init(). We map all memory banks
> >>>>>>>>> later
> >>>>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>> dtb_pa)
> >>>>>>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> >>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>>>>> (PMD_SIZE - 1));
> >>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>>>>> #else
> >>>>>>>>> #ifndef CONFIG_BUILTIN_DTB
> >>>>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>> dtb_pa)
> >>>>>>>>> pa + PGDIR_SIZE, PGDIR_SIZE,
> >>>>>>>>> PAGE_KERNEL);
> >>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>>>>> (PGDIR_SIZE - 1));
> >>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>>>>> #endif
> >>>>>>>>> dtb_early_pa = dtb_pa;
> >>>>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> >>>>>>>>> uintptr_t va, map_size;
> >>>>>>>>> phys_addr_t pa, start, end;
> >>>>>>>>> u64 i;
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>>>>> (uintptr_t)(&_xiprom);
> >>>>>>>>> +#endif
> >>>>>>>>>
> >>>>>>>>> /**
> >>>>>>>>> * MMU is enabled at this point. But page table setup is
> >>>>>>>>> not complete yet.
> >>>>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> >>>>>>>>> map_size,
> >>>>>>>>> PAGE_KERNEL_EXEC);
> >>>>>>>>> }
> >>>>>>>>> }
> >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> >>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>>>>> + va += map_size)
> >>>>>>>>> + create_pgd_mapping(swapper_pg_dir, va,
> >>>>>>>>> + CONFIG_XIP_PHYS_ADDR + (va -
> >>>>>>>>> XIP_VIRT_ADDR_START),
> >>>>>>>>> + map_size, PAGE_KERNEL_EXEC);
> >>>>>>>>> +
> >>>>>>>>> +#endif
> >>>>>>>>>
> >>>>>>>>> /* Clear fixmap PTE and PMD mappings */
> >>>>>>>>> clear_fixmap(FIX_PTE);
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> linux-riscv mailing list
> >>>>>>> [email protected]
> >>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> linux-riscv mailing list
> >>>>> [email protected]
> >>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>
> >>>> _______________________________________________
> >>>> linux-riscv mailing list
> >>>> [email protected]
> >>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>
> >> _______________________________________________
> >> linux-riscv mailing list
> >> [email protected]
> >> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>
On Sun, Apr 4, 2021 at 10:39 AM Vitaly Wool <[email protected]> wrote:
>
> On Sat, Apr 3, 2021 at 12:00 PM Alex Ghiti <[email protected]> wrote:
> >
> > Hi Vitaly,
> >
> > Le 4/1/21 à 7:10 AM, Alex Ghiti a écrit :
> > > Le 4/1/21 à 4:52 AM, Vitaly Wool a écrit :
> > >> Hi Alex,
> > >>
> > >> On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <[email protected]> wrote:
> > >>>
> > >>> Hi,
> > >>>
> > >>> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
> > >>>> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
> > >>>>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
> > >>>>>>
> > >>>>>>
> > >>>>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
> > >>>>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
> > >>>>>>> <[email protected]> wrote:
> > >>>>>>>>
> > >>>>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
> > >>>>>>>> wrote:
> > >>>>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> > >>>>>>>>> It allows code to be executed directly from non-volatile storage
> > >>>>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
> > >>>>>>>>> be found on many RISC-V platforms. This makes way for significant
> > >>>>>>>>> optimization of RAM footprint. The XIP kernel is not compressed
> > >>>>>>>>> since it has to run directly from flash, so it will occupy more
> > >>>>>>>>> space on the non-volatile storage. The physical flash address used
> > >>>>>>>>> to link the kernel object files and for storing it has to be known
> > >>>>>>>>> at compile time and is represented by a Kconfig option.
> > >>>>>>>>>
> > >>>>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
> > >>>>>>>>> kernels.
> > >>>>>>>>>
> > >>>>>>>>> Signed-off-by: Vitaly Wool <[email protected]>
> > >>>>>>>>>
> > >>>>>>>>> ---
> > >>>>>>>>>
> > >>>>>>>>> Changes in v2:
> > >>>>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled
> > >>>>>>>>> yet
> > >>>>>>>>> o both for 32-bit and 64-bit RISC-V
> > >>>>>>>>> - SP is explicitly set to a safe place in RAM before
> > >>>>>>>>> __copy_data call
> > >>>>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
> > >>>>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> > >>>>>>>>> Changes in v3:
> > >>>>>>>>> - rebased against latest for-next
> > >>>>>>>>> - XIP address fixup macro now takes an argument
> > >>>>>>>>> - SMP related fixes
> > >>>>>>>>> Changes in v4:
> > >>>>>>>>> - rebased against the current for-next
> > >>>>>>>>> - less #ifdef's in C/ASM code
> > >>>>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> > >>>>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
> > >>>>>>>>> - Fixed multi-core boot
> > >>>>>>>>> Changes in v5:
> > >>>>>>>>> - fixed build error for non-XIP kernels
> > >>>>>>>>> Changes in v6:
> > >>>>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> > >>>>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> > >>>>>>>>> PHYS_RAM_BASE in non-XIP configurations if needed
> > >>>>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid
> > >>>>>>>>> side
> > >>>>>>>>> effects
> > >>>>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
> > >>>>>>>>
> > >>>>>>>> So v5 landed on for-next, which generally means it's best to avoid
> > >>>>>>>> re-spinning the patch and instead send along fixups. That said,
> > >>>>>>>> the v5
> > >>>>>>>> is causing some testing failures for me.
> > >>>>>>>>
> > >>>>>>>> I'm going to drop the v5 for now as I don't have time to test this
> > >>>>>>>> tonight. I'll try and take a look soon, as it will conflict with
> > >>>>>>>> Alex's
> > >>>>>>>> patches.
> > >>>>>>>
> > >>>>>>> I can come up with the incremental patch instead pretty much
> > >>>>>>> straight
> > >>>>>>> away if that works better.
> > >>>>>>>
> > >>>>>>> ~Vitaly
> > >>>>>>>
> > >>>>>>>>> arch/riscv/Kconfig | 49 ++++++++++-
> > >>>>>>>>> arch/riscv/Makefile | 8 +-
> > >>>>>>>>> arch/riscv/boot/Makefile | 13 +++
> > >>>>>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> > >>>>>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> > >>>>>>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
> > >>>>>>>>> arch/riscv/kernel/head.h | 3 +
> > >>>>>>>>> arch/riscv/kernel/setup.c | 8 +-
> > >>>>>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132
> > >>>>>>>>> ++++++++++++++++++++++++++++
> > >>>>>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> > >>>>>>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> > >>>>>>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
> > >>>>>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> > >>>>>>>>>
> > >>>>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > >>>>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
> > >>>>>>>>> --- a/arch/riscv/Kconfig
> > >>>>>>>>> +++ b/arch/riscv/Kconfig
> > >>>>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
> > >>>>>>>>>
> > >>>>>>>>> config EFI
> > >>>>>>>>> bool "UEFI runtime support"
> > >>>>>>>>> - depends on OF
> > >>>>>>>>> + depends on OF && !XIP_KERNEL
> > >>>>>>>>> select LIBFDT
> > >>>>>>>>> select UCS2_STRING
> > >>>>>>>>> select EFI_PARAMS_FROM_FDT
> > >>>>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> > >>>>>>>>> def_bool y
> > >>>>>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
> > >>>>>>>>>
> > >>>>>>>>> +config PHYS_RAM_BASE_FIXED
> > >>>>>>>>> + bool "Explicitly specified physical RAM address"
> > >>>>>>>>> + default n
> > >>>>>>>>> +
> > >>>>>>>>> +config PHYS_RAM_BASE
> > >>>>>>>>> + hex "Platform Physical RAM address"
> > >>>>>>>>> + depends on PHYS_RAM_BASE_FIXED
> > >>>>>>>>> + default "0x80000000"
> > >>>>>>>>> + help
> > >>>>>>>>> + This is the physical address of RAM in the system. It has
> > >>>>>>>>> to be
> > >>>>>>>>> + explicitly specified to run early relocations of
> > >>>>>>>>> read-write data
> > >>>>>>>>> + from flash to RAM.
> > >>>>>>>>> +
> > >>>>>>>>> +config XIP_KERNEL
> > >>>>>>>>> + bool "Kernel Execute-In-Place from ROM"
> > >>>>>>>>> + depends on MMU
> > >>>>>>>>> + select PHYS_RAM_BASE_FIXED
> > >>>>>>>>> + help
> > >>>>>>>>> + Execute-In-Place allows the kernel to run from
> > >>>>>>>>> non-volatile storage
> > >>>>>>>>> + directly addressable by the CPU, such as NOR flash. This
> > >>>>>>>>> saves RAM
> > >>>>>>>>> + space since the text section of the kernel is not loaded
> > >>>>>>>>> from flash
> > >>>>>>>>> + to RAM. Read-write sections, such as the data section and
> > >>>>>>>>> stack,
> > >>>>>>>>> + are still copied to RAM. The XIP kernel is not compressed
> > >>>>>>>>> since
> > >>>>>>>>> + it has to run directly from flash, so it will take more
> > >>>>>>>>> space to
> > >>>>>>>>> + store it. The flash address used to link the kernel
> > >>>>>>>>> object files,
> > >>>>>>>>> + and for storing it, is configuration dependent. Therefore,
> > >>>>>>>>> if you
> > >>>>>>>>> + say Y here, you must know the proper physical address
> > >>>>>>>>> where to
> > >>>>>>>>> + store the kernel image depending on your own flash memory
> > >>>>>>>>> usage.
> > >>>>>>>>> +
> > >>>>>>>>> + Also note that the make target becomes "make xipImage"
> > >>>>>>>>> rather than
> > >>>>>>>>> + "make zImage" or "make Image". The final kernel binary to
> > >>>>>>>>> put in
> > >>>>>>>>> + ROM memory will be arch/riscv/boot/xipImage.
> > >>>>>>>>> +
> > >>>>>>>>> + If unsure, say N.
> > >>>>>>>>> +
> > >>>>>>>>> +config XIP_PHYS_ADDR
> > >>>>>>>>> + hex "XIP Kernel Physical Location"
> > >>>>>>>>> + depends on XIP_KERNEL
> > >>>>>>>>> + default "0x21000000"
> > >>>>>>>>> + help
> > >>>>>>>>> + This is the physical address in your flash memory the
> > >>>>>>>>> kernel will
> > >>>>>>>>> + be linked for and stored to. This address is dependent on
> > >>>>>>>>> your
> > >>>>>>>>> + own flash usage.
> > >>>>>>>>> +
> > >>>>>>>>> endmenu
> > >>>>>>>>>
> > >>>>>>>>> config BUILTIN_DTB
> > >>>>>>>>> - def_bool n
> > >>>>>>>>> + bool
> > >>>>>>>>> depends on OF
> > >>>>>>>>> + default y if XIP_KERNEL
> > >>>>>>>>>
> > >>>>>>>>> menu "Power management options"
> > >>>>>>>>>
> > >>>>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > >>>>>>>>> index 1368d943f1f3..8fcbec03974d 100644
> > >>>>>>>>> --- a/arch/riscv/Makefile
> > >>>>>>>>> +++ b/arch/riscv/Makefile
> > >>>>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> > >>>>>>>>>
> > >>>>>>>>> # Default target when executing plain make
> > >>>>>>>>> boot := arch/riscv/boot
> > >>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> > >>>>>>>>> +KBUILD_IMAGE := $(boot)/xipImage
> > >>>>>>>>> +else
> > >>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> > >>>>>>>>> +endif
> > >>>>>>>>>
> > >>>>>>>>> head-y := arch/riscv/kernel/head.o
> > >>>>>>>>>
> > >>>>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
> > >>>>>>>>> vdso_install:
> > >>>>>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> > >>>>>>>>>
> > >>>>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
> > >>>>>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> > >>>>>>>>> KBUILD_IMAGE := $(boot)/loader.bin
> > >>>>>>>>> else
> > >>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> > >>>>>>>>> endif
> > >>>>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
> > >>>>>>>>> +endif
> > >>>>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> > >>>>>>>>>
> > >>>>>>>>> all: $(notdir $(KBUILD_IMAGE))
> > >>>>>>>>>
> > >>>>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> > >>>>>>>>> index 03404c84f971..6bf299f70c27 100644
> > >>>>>>>>> --- a/arch/riscv/boot/Makefile
> > >>>>>>>>> +++ b/arch/riscv/boot/Makefile
> > >>>>>>>>> @@ -17,8 +17,21 @@
> > >>>>>>>>> KCOV_INSTRUMENT := n
> > >>>>>>>>>
> > >>>>>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R
> > >>>>>>>>> .note.gnu.build-id -R
> > >>>>>>>>> .comment -S
> > >>>>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
> > >>>>>>>>> -R .comment -S
> > >>>>>>>>>
> > >>>>>>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
> > >>>>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
> > >>>>>>>>> xipImage
> > >>>>>>>>> +
> > >>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> > >>>>>>>>> +
> > >>>>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> > >>>>>>>>> +cmd_mkxip = $(cmd_objcopy)
> > >>>>>>>>> +
> > >>>>>>>>> +$(obj)/xipImage: vmlinux FORCE
> > >>>>>>>>> + $(call if_changed,mkxip)
> > >>>>>>>>> + @$(kecho) ' Physical Address of xipImage:
> > >>>>>>>>> $(CONFIG_XIP_PHYS_ADDR)'
> > >>>>>>>>> +
> > >>>>>>>>> +endif
> > >>>>>>>>>
> > >>>>>>>>> $(obj)/Image: vmlinux FORCE
> > >>>>>>>>> $(call if_changed,objcopy)
> > >>>>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
> > >>>>>>>>> b/arch/riscv/include/asm/pgtable.h
> > >>>>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
> > >>>>>>>>> --- a/arch/riscv/include/asm/pgtable.h
> > >>>>>>>>> +++ b/arch/riscv/include/asm/pgtable.h
> > >>>>>>>>> @@ -11,6 +11,33 @@
> > >>>>>>>>>
> > >>>>>>>>> #include <asm/pgtable-bits.h>
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_MMU
> > >>>>>>>>> +
> > >>>>>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > >>>>>>>>> +
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> > >>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> > >>>>>>>>> +
> > >>>>>>>>> +#define XIP_OFFSET SZ_8M
> > >>>>>>>>> +#define XIP_MASK (SZ_8M - 1)
> > >>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) \
> > >>>>>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> > >>>>>>>>> +
> > >>>>>>>>> +#else
> > >>>>>>>>> +
> > >>>>>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > >>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
> > >>>>>>>>> +
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>> +
> > >>>>>>>>> +#else
> > >>>>>>>>> +
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>> +#endif /* CONFIG_MMU */
> > >>>>>>>>> +
> > >>>>>>>>> #ifndef __ASSEMBLY__
> > >>>>>>>>>
> > >>>>>>>>> /* Page Upper Directory not used in RISC-V */
> > >>>>>>>>> @@ -21,9 +48,25 @@
> > >>>>>>>>>
> > >>>>>>>>> #ifdef CONFIG_MMU
> > >>>>>>>>>
> > >>>>>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > >>>>>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
> > >>>>>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +/*
> > >>>>>>>>> + * Since we use sections to map it, this macro replaces the
> > >>>>>>>>> physical address
> > >>>>>>>>> + * with its virtual address while keeping offset from the base
> > >>>>>>>>> section.
> > >>>>>>>>> + */
> > >>>>>>>>> +#define XIP_PHYS_ADDR(va) \
> > >>>>>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
> > >>>>>>>>> CONFIG_XIP_PHYS_ADDR)
> > >>>>>>>>> +
> > >>>>>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > >>>>>>>>> +
> > >>>>>>>>> +#define XIP_FIXUP(addr) ({ \
> > >>>>>>>>> + uintptr_t __a = (uintptr_t)(addr); \
> > >>>>>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
> > >>>>>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> > >>>>>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
> > >>>>>>>>> XIP_OFFSET : __a; \
> > >>>>>>>>> +})
> > >>>>>>>>> +#else
> > >>>>>>>>> +#define XIP_FIXUP(addr) (addr)
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>>
> > >>>>>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
> > >>>>>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET -
> > >>>>>>>>> BPF_JIT_REGION_SIZE)
> > >>>>>>>>> @@ -484,8 +527,20 @@ static inline int
> > >>>>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
> > >>>>>>>>>
> > >>>>>>>>> #define kern_addr_valid(addr) (1) /* FIXME */
> > >>>>>>>>>
> > >>>>>>>>> -extern void *dtb_early_va;
> > >>>>>>>>> -extern uintptr_t dtb_early_pa;
> > >>>>>>>>> +extern void *_dtb_early_va;
> > >>>>>>>>> +extern uintptr_t _dtb_early_pa;
> > >>>>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> > >>>>>>>>> +
> > >>>>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> > >>>>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> > >>>>>>>>> +
> > >>>>>>>>> +#else
> > >>>>>>>>> +
> > >>>>>>>>> +#define dtb_early_va _dtb_early_va
> > >>>>>>>>> +#define dtb_early_pa _dtb_early_pa
> > >>>>>>>>> +
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>> +
> > >>>>>>>>> void setup_bootmem(void);
> > >>>>>>>>> void paging_init(void);
> > >>>>>>>>> void misc_mem_init(void);
> > >>>>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
> > >>>>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
> > >>>>>>>>> index 685fae72b7f5..2413c2997350 100644
> > >>>>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> > >>>>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> > >>>>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
> > >>>>>>>>> long hartid)
> > >>>>>>>>> }
> > >>>>>>>>> #endif
> > >>>>>>>>>
> > >>>>>>>>> +static inline unsigned long get_secondary_start_phys(void)
> > >>>>>>>>> +{
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
> > >>>>>>>>> +#else
> > >>>>>>>>> + return __pa_symbol(secondary_start_sbi);
> > >>>>>>>>> +#endif
> > >>>>>>>>> +}
> > >>>>>>>>> +
> > >>>>>>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct
> > >>>>>>>>> *tidle)
> > >>>>>>>>> {
> > >>>>>>>>> int rc;
> > >>>>>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> > >>>>>>>>> + unsigned long boot_addr = get_secondary_start_phys();
> > >>>>>>>>> int hartid = cpuid_to_hartid_map(cpuid);
> > >>>>>>>>>
> > >>>>>>>>> cpu_update_secondary_bootdata(cpuid, tidle);
> > >>>>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > >>>>>>>>> index f5a9bad86e58..bbe74e37914f 100644
> > >>>>>>>>> --- a/arch/riscv/kernel/head.S
> > >>>>>>>>> +++ b/arch/riscv/kernel/head.S
> > >>>>>>>>> @@ -9,11 +9,23 @@
> > >>>>>>>>> #include <linux/linkage.h>
> > >>>>>>>>> #include <asm/thread_info.h>
> > >>>>>>>>> #include <asm/page.h>
> > >>>>>>>>> +#include <asm/pgtable.h>
> > >>>>>>>>> #include <asm/csr.h>
> > >>>>>>>>> #include <asm/hwcap.h>
> > >>>>>>>>> #include <asm/image.h>
> > >>>>>>>>> #include "efi-header.S"
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
> > >>>>>>>>> + REG_L t0, _xip_fixup
> > >>>>>>>>> + add \reg, \reg, t0
> > >>>>>>>>> +.endm
> > >>>>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
> > >>>>>>>>> XIP_OFFSET
> > >>>>>>>>> +#else
> > >>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
> > >>>>>>>>> +.endm
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>> +
> > >>>>>>>>> __HEAD
> > >>>>>>>>> ENTRY(_start)
> > >>>>>>>>> /*
> > >>>>>>>>> @@ -69,7 +81,11 @@ pe_head_start:
> > >>>>>>>>> #ifdef CONFIG_MMU
> > >>>>>>>>> relocate:
> > >>>>>>>>> /* Relocate return address */
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > >>>>>>>>> +#else
> > >>>>>>>>> li a1, PAGE_OFFSET
> > >>>>>>>>> +#endif
> > >>>>>>>>> la a2, _start
> > >>>>>>>>> sub a1, a1, a2
> > >>>>>>>>> add ra, ra, a1
> > >>>>>>>>> @@ -91,6 +107,7 @@ relocate:
> > >>>>>>>>> * to ensure the new translations are in use.
> > >>>>>>>>> */
> > >>>>>>>>> la a0, trampoline_pg_dir
> > >>>>>>>>> + XIP_FIXUP_OFFSET a0
> > >>>>>>>>> srl a0, a0, PAGE_SHIFT
> > >>>>>>>>> or a0, a0, a1
> > >>>>>>>>> sfence.vma
> > >>>>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
> > >>>>>>>>>
> > >>>>>>>>> slli a3, a0, LGREG
> > >>>>>>>>> la a4, __cpu_up_stack_pointer
> > >>>>>>>>> + XIP_FIXUP_OFFSET a4
> > >>>>>>>>> la a5, __cpu_up_task_pointer
> > >>>>>>>>> + XIP_FIXUP_OFFSET a5
> > >>>>>>>>> add a4, a3, a4
> > >>>>>>>>> add a5, a3, a5
> > >>>>>>>>> REG_L sp, (a4)
> > >>>>>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
> > >>>>>>>>> #ifdef CONFIG_MMU
> > >>>>>>>>> /* Enable virtual memory and relocate to virtual
> > >>>>>>>>> address */
> > >>>>>>>>> la a0, swapper_pg_dir
> > >>>>>>>>> + XIP_FIXUP_OFFSET a0
> > >>>>>>>>> call relocate
> > >>>>>>>>> #endif
> > >>>>>>>>> call setup_trap_vector
> > >>>>>>>>> @@ -236,12 +256,33 @@ pmp_done:
> > >>>>>>>>> .Lgood_cores:
> > >>>>>>>>> #endif
> > >>>>>>>>>
> > >>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
> > >>>>>>>>> /* Pick one hart to run the main boot sequence */
> > >>>>>>>>> la a3, hart_lottery
> > >>>>>>>>> li a2, 1
> > >>>>>>>>> amoadd.w a3, a2, (a3)
> > >>>>>>>>> bnez a3, .Lsecondary_start
> > >>>>>>>>>
> > >>>>>>>>> +#else
> > >>>>>>>>> + /* hart_lottery in flash contains a magic number */
> > >>>>>>>>> + la a3, hart_lottery
> > >>>>>>>>> + mv a2, a3
> > >>>>>>>>> + XIP_FIXUP_OFFSET a2
> > >>>>>>>>> + lw t1, (a3)
> > >>>>>>>>> + amoswap.w t0, t1, (a2)
> > >>>>>>>>> + /* first time here if hart_lottery in RAM is not set */
> > >>>>>>>>> + beq t0, t1, .Lsecondary_start
> > >>>>>>>>> +
> > >>>>>>>>> + la sp, _end + THREAD_SIZE
> > >>>>>>>>> + XIP_FIXUP_OFFSET sp
> > >>>>>>>>> + mv s0, a0
> > >>>>>>>>> + call __copy_data
> > >>>>>>>>> +
> > >>>>>>>>> + /* Restore a0 copy */
> > >>>>>>>>> + mv a0, s0
> > >>>>>>>>> +#endif
> > >>>>>>>>> +
> > >>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
> > >>>>>>>>> /* Clear BSS for flat non-ELF images */
> > >>>>>>>>> la a3, __bss_start
> > >>>>>>>>> la a4, __bss_stop
> > >>>>>>>>> @@ -251,15 +292,18 @@ clear_bss:
> > >>>>>>>>> add a3, a3, RISCV_SZPTR
> > >>>>>>>>> blt a3, a4, clear_bss
> > >>>>>>>>> clear_bss_done:
> > >>>>>>>>> -
> > >>>>>>>>> +#endif
> > >>>>>>>>> /* Save hart ID and DTB physical address */
> > >>>>>>>>> mv s0, a0
> > >>>>>>>>> mv s1, a1
> > >>>>>>>>> +
> > >>>>>>>>> la a2, boot_cpu_hartid
> > >>>>>>>>> + XIP_FIXUP_OFFSET a2
> > >>>>>>>>> REG_S a0, (a2)
> > >>>>>>>>>
> > >>>>>>>>> /* Initialize page tables and relocate to virtual
> > >>>>>>>>> addresses */
> > >>>>>>>>> la sp, init_thread_union + THREAD_SIZE
> > >>>>>>>>> + XIP_FIXUP_OFFSET sp
> > >>>>>>>>> #ifdef CONFIG_BUILTIN_DTB
> > >>>>>>>>> la a0, __dtb_start
> > >>>>>>>>> #else
> > >>>>>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
> > >>>>>>>>> call setup_vm
> > >>>>>>>>> #ifdef CONFIG_MMU
> > >>>>>>>>> la a0, early_pg_dir
> > >>>>>>>>> + XIP_FIXUP_OFFSET a0
> > >>>>>>>>> call relocate
> > >>>>>>>>> #endif /* CONFIG_MMU */
> > >>>>>>>>>
> > >>>>>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
> > >>>>>>>>>
> > >>>>>>>>> slli a3, a0, LGREG
> > >>>>>>>>> la a1, __cpu_up_stack_pointer
> > >>>>>>>>> + XIP_FIXUP_OFFSET a1
> > >>>>>>>>> la a2, __cpu_up_task_pointer
> > >>>>>>>>> + XIP_FIXUP_OFFSET a2
> > >>>>>>>>> add a1, a3, a1
> > >>>>>>>>> add a2, a3, a2
> > >>>>>>>>>
> > >>>>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> > >>>>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
> > >>>>>>>>> --- a/arch/riscv/kernel/head.h
> > >>>>>>>>> +++ b/arch/riscv/kernel/head.h
> > >>>>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> > >>>>>>>>>
> > >>>>>>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
> > >>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +asmlinkage void __init __copy_data(void);
> > >>>>>>>>> +#endif
> > >>>>>>>>>
> > >>>>>>>>> extern void *__cpu_up_stack_pointer[];
> > >>>>>>>>> extern void *__cpu_up_task_pointer[];
> > >>>>>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> > >>>>>>>>> index e85bacff1b50..a0384c72c272 100644
> > >>>>>>>>> --- a/arch/riscv/kernel/setup.c
> > >>>>>>>>> +++ b/arch/riscv/kernel/setup.c
> > >>>>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
> > >>>>>>>>> __section(".data") = {
> > >>>>>>>>> * This is used before the kernel initializes the BSS so it
> > >>>>>>>>> can't be in the
> > >>>>>>>>> * BSS.
> > >>>>>>>>> */
> > >>>>>>>>> -atomic_t hart_lottery __section(".sdata");
> > >>>>>>>>> +atomic_t hart_lottery __section(".sdata")
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> += ATOMIC_INIT(0xC001BEEF)
> > >>>>>>>>> +#endif
> > >>>>>>>>> +;
> > >>>>>>>>> unsigned long boot_cpu_hartid;
> > >>>>>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
> > >>>>>>>>>
> > >>>>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> > >>>>>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> > >>>>>>>>> unflatten_and_copy_device_tree();
> > >>>>>>>>> #else
> > >>>>>>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
> > >>>>>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> > >>>>>>>>> unflatten_device_tree();
> > >>>>>>>>> else
> > >>>>>>>>> pr_err("No DTB found in kernel mappings\n");
> > >>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
> > >>>>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
> > >>>>>>>>> new file mode 100644
> > >>>>>>>>> index 000000000000..9f0f08c34cd3
> > >>>>>>>>> --- /dev/null
> > >>>>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> > >>>>>>>>> @@ -0,0 +1,132 @@
> > >>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
> > >>>>>>>>> +/*
> > >>>>>>>>> + * Copyright (C) 2012 Regents of the University of California
> > >>>>>>>>> + * Copyright (C) 2017 SiFive
> > >>>>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> > >>>>>>>>> + */
> > >>>>>>>>> +
> > >>>>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > >>>>>>>>> +/* No __ro_after_init data in the .rodata section - which will
> > >>>>>>>>> always be ro */
> > >>>>>>>>> +#define RO_AFTER_INIT_DATA
> > >>>>>>>>> +
> > >>>>>>>>> +#include <asm/vmlinux.lds.h>
> > >>>>>>>>> +#include <asm/page.h>
> > >>>>>>>>> +#include <asm/pgtable.h>
> > >>>>>>>>> +#include <asm/cache.h>
> > >>>>>>>>> +#include <asm/thread_info.h>
> > >>>>>>>>> +
> > >>>>>>>>> +OUTPUT_ARCH(riscv)
> > >>>>>>>>> +ENTRY(_start)
> > >>>>>>>>> +
> > >>>>>>>>> +jiffies = jiffies_64;
> > >>>>>>>>> +
> > >>>>>>>>> +SECTIONS
> > >>>>>>>>> +{
> > >>>>>>>>> + /* Beginning of code and text segment */
> > >>>>>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> > >>>>>>>>> + _xiprom = .;
> > >>>>>>>>> + _start = .;
> > >>>>>>>>> + HEAD_TEXT_SECTION
> > >>>>>>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
> > >>>>>>>>> + /* we have to discard exit text and such at runtime, not
> > >>>>>>>>> link time */
> > >>>>>>>>> + .exit.text :
> > >>>>>>>>> + {
> > >>>>>>>>> + EXIT_TEXT
> > >>>>>>>>> + }
> > >>>>>>>>> +
> > >>>>>>>>> + .text : {
> > >>>>>>>>> + _text = .;
> > >>>>>>>>> + _stext = .;
> > >>>>>>>>> + TEXT_TEXT
> > >>>>>>>>> + SCHED_TEXT
> > >>>>>>>>> + CPUIDLE_TEXT
> > >>>>>>>>> + LOCK_TEXT
> > >>>>>>>>> + KPROBES_TEXT
> > >>>>>>>>> + ENTRY_TEXT
> > >>>>>>>>> + IRQENTRY_TEXT
> > >>>>>>>>> + SOFTIRQENTRY_TEXT
> > >>>>>>>>> + *(.fixup)
> > >>>>>>>>> + _etext = .;
> > >>>>>>>>> + }
> > >>>>>>>>> + RO_DATA(L1_CACHE_BYTES)
> > >>>>>>>>> + .srodata : {
> > >>>>>>>>> + *(.srodata*)
> > >>>>>>>>> + }
> > >>>>>>>>> + .init.rodata : {
> > >>>>>>>>> + INIT_SETUP(16)
> > >>>>>>>>> + INIT_CALLS
> > >>>>>>>>> + CON_INITCALL
> > >>>>>>>>> + INIT_RAM_FS
> > >>>>>>>>> + }
> > >>>>>>>>> + _exiprom = .; /* End of XIP ROM area */
> > >>>>>>>>> +
> > >>>>>>>>> +
> > >>>>>>>>> +/*
> > >>>>>>>>> + * From this point, stuff is considered writable and will be
> > >>>>>>>>> copied to RAM
> > >>>>>>>>> + */
> > >>>>>>>>> + __data_loc = ALIGN(16); /* location in file */
> > >>>>>>>>> + . = PAGE_OFFSET; /* location in memory */
> > >>>>>>>>> +
> > >>>>>>>>> + _sdata = .; /* Start of data section */
> > >>>>>>>>> + _data = .;
> > >>>>>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> > >>>>>>>>> + _edata = .;
> > >>>>>>>>> + __start_ro_after_init = .;
> > >>>>>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
> > >>>>>>>>> LOAD_OFFSET) {
> > >>>>>>>>> + *(.data..ro_after_init)
> > >>>>>>>>> + }
> > >>>>>>>>> + __end_ro_after_init = .;
> > >>>>>>>>> +
> > >>>>>>>>> + . = ALIGN(PAGE_SIZE);
> > >>>>>>>>> + __init_begin = .;
> > >>>>>>>>> + .init.data : {
> > >>>>>>>>> + INIT_DATA
> > >>>>>>>>> + }
> > >>>>>>>>> + .exit.data : {
> > >>>>>>>>> + EXIT_DATA
> > >>>>>>>>> + }
> > >>>>>>>>> + . = ALIGN(8);
> > >>>>>>>>> + __soc_early_init_table : {
> > >>>>>>>>> + __soc_early_init_table_start = .;
> > >>>>>>>>> + KEEP(*(__soc_early_init_table))
> > >>>>>>>>> + __soc_early_init_table_end = .;
> > >>>>>>>>> + }
> > >>>>>>>>> + __soc_builtin_dtb_table : {
> > >>>>>>>>> + __soc_builtin_dtb_table_start = .;
> > >>>>>>>>> + KEEP(*(__soc_builtin_dtb_table))
> > >>>>>>>>> + __soc_builtin_dtb_table_end = .;
> > >>>>>>>>> + }
> > >>>>>>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
> > >>>>>>>>> +
> > >>>>>>>>> + . = ALIGN(PAGE_SIZE);
> > >>>>>>>>> + __init_end = .;
> > >>>>>>>>> +
> > >>>>>>>>> + .sdata : {
> > >>>>>>>>> + __global_pointer$ = . + 0x800;
> > >>>>>>>>> + *(.sdata*)
> > >>>>>>>>> + *(.sbss*)
> > >>>>>>>>> + }
> > >>>>>>>>> +
> > >>>>>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> > >>>>>>>>> + EXCEPTION_TABLE(0x10)
> > >>>>>>>>> +
> > >>>>>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> > >>>>>>>>> + *(.rel.dyn*)
> > >>>>>>>>> + }
> > >>>>>>>>> +
> > >>>>>>>>> + /*
> > >>>>>>>>> + * End of copied data. We need a dummy section to get its
> > >>>>>>>>> LMA.
> > >>>>>>>>> + * Also located before final ALIGN() as trailing padding is
> > >>>>>>>>> not stored
> > >>>>>>>>> + * in the resulting binary file and useless to copy.
> > >>>>>>>>> + */
> > >>>>>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> > >>>>>>>>> + _edata_loc = LOADADDR(.data.endmark);
> > >>>>>>>>> +
> > >>>>>>>>> + . = ALIGN(PAGE_SIZE);
> > >>>>>>>>> + _end = .;
> > >>>>>>>>> +
> > >>>>>>>>> + STABS_DEBUG
> > >>>>>>>>> + DWARF_DEBUG
> > >>>>>>>>> +
> > >>>>>>>>> + DISCARDS
> > >>>>>>>>> +}
> > >>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
> > >>>>>>>>> b/arch/riscv/kernel/vmlinux.lds.S
> > >>>>>>>>> index de03cb22d0e9..6745ec325930 100644
> > >>>>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
> > >>>>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
> > >>>>>>>>> @@ -4,7 +4,12 @@
> > >>>>>>>>> * Copyright (C) 2017 SiFive
> > >>>>>>>>> */
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +#include "vmlinux-xip.lds.S"
> > >>>>>>>>> +#else
> > >>>>>>>>> +
> > >>>>>>>>> #define LOAD_OFFSET PAGE_OFFSET
> > >>>>>>>>> +
> > >>>>>>>>> #include <asm/vmlinux.lds.h>
> > >>>>>>>>> #include <asm/page.h>
> > >>>>>>>>> #include <asm/cache.h>
> > >>>>>>>>> @@ -132,3 +137,4 @@ SECTIONS
> > >>>>>>>>>
> > >>>>>>>>> DISCARDS
> > >>>>>>>>> }
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> > >>>>>>>>> index 7f5036fbee8c..efe649d41f95 100644
> > >>>>>>>>> --- a/arch/riscv/mm/init.c
> > >>>>>>>>> +++ b/arch/riscv/mm/init.c
> > >>>>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
> > >>>>>>>>>
> > >>>>>>>>> extern char _start[];
> > >>>>>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> > >>>>>>>>> -void *dtb_early_va __initdata;
> > >>>>>>>>> -uintptr_t dtb_early_pa __initdata;
> > >>>>>>>>> +void *_dtb_early_va __initdata;
> > >>>>>>>>> +uintptr_t _dtb_early_pa __initdata;
> > >>>>>>>>>
> > >>>>>>>>> struct pt_alloc_ops {
> > >>>>>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
> > >>>>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> > >>>>>>>>> (unsigned long)VMALLOC_END);
> > >>>>>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> > >>>>>>>>> (unsigned long)high_memory);
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> > >>>>>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>> }
> > >>>>>>>>> #else
> > >>>>>>>>> static void print_vm_layout(void) { }
> > >>>>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> > >>>>>>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
> > >>>>>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> + vmlinux_start = __pa_symbol(&_sdata);
> > >>>>>>>>> +#endif
> > >>>>>>>>> +
> > >>>>>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
> > >>>>>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
> > >>>>>>>>>
> > >>>>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> > >>>>>>>>> memblock_allow_resize();
> > >>>>>>>>> }
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +
> > >>>>>>>>> +extern char _xiprom[], _exiprom[];
> > >>>>>>>>> +extern char _sdata[], _edata[];
> > >>>>>>>>> +
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>> +
> > >>>>>>>>> #ifdef CONFIG_MMU
> > >>>>>>>>> -static struct pt_alloc_ops pt_ops;
> > >>>>>>>>> +static struct pt_alloc_ops _pt_ops;
> > >>>>>>>>> +
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> > >>>>>>>>> +#else
> > >>>>>>>>> +#define pt_ops _pt_ops
> > >>>>>>>>> +#endif
> > >>>>>>>>>
> > >>>>>>>>> unsigned long va_pa_offset;
> > >>>>>>>>> EXPORT_SYMBOL(va_pa_offset);
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +#define va_pa_offset (*((unsigned long
> > >>>>>>>>> *)XIP_FIXUP(&va_pa_offset)))
> > >>>>>>>>> +#endif
> > >>>>>>>>> unsigned long pfn_base;
> > >>>>>>>>> EXPORT_SYMBOL(pfn_base);
> > >>>>>>>>>
> > >>>>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
> > >>>>>>>>> __page_aligned_bss;
> > >>>>>>>>>
> > >>>>>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata
> > >>>>>>>>> __aligned(PAGE_SIZE);
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +#define trampoline_pg_dir ((pgd_t
> > >>>>>>>>> *)XIP_FIXUP(trampoline_pg_dir))
> > >>>>>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> > >>>>>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>> +
> > >>>>>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
> > >>>>>>>>> pgprot_t prot)
> > >>>>>>>>> {
> > >>>>>>>>> unsigned long addr = __fix_to_virt(idx);
> > >>>>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
> > >>>>>>>>> __page_aligned_bss;
> > >>>>>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> > >>>>>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata
> > >>>>>>>>> __aligned(PAGE_SIZE);
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > >>>>>>>>> +
> > >>>>>>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> > >>>>>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> > >>>>>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> > >>>>>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> > >>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> > >>>>>>>>> +
> > >>>>>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> > >>>>>>>>> {
> > >>>>>>>>> /* Before MMU is enabled */
> > >>>>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
> > >>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> > >>>>>>>>> return PMD_SIZE;
> > >>>>>>>>> }
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> +/* called from head.S with MMU off */
> > >>>>>>>>> +asmlinkage void __init __copy_data(void)
> > >>>>>>>>> +{
> > >>>>>>>>> + void *from = (void *)(&_sdata);
> > >>>>>>>>> + void *end = (void *)(&_end);
> > >>>>>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> > >>>>>>>>> + size_t sz = (size_t)(end - from);
> > >>>>>>>>> +
> > >>>>>>>>> + memcpy(to, from, sz);
> > >>>>>>>>> +}
> > >>>>>>>>> +#endif
> > >>>>>>>>> +
> > >>>>>>>>> /*
> > >>>>>>>>> * setup_vm() is called from head.S with MMU-off.
> > >>>>>>>>> *
> > >>>>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
> > >>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> > >>>>>>>>>
> > >>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > >>>>>>>>> {
> > >>>>>>>>> - uintptr_t va, pa, end_va;
> > >>>>>>>>> + uintptr_t va, end_va;
> > >>>>>>>>> + uintptr_t __maybe_unused pa;
> > >>>>>>>>> uintptr_t load_pa = (uintptr_t)(&_start);
> > >>>>>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> > >>>>>>>>> uintptr_t map_size;
> > >>>>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
> > >>>>>>>>> dtb_pa)
> > >>>>>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> > >>>>>>>>> #endif
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> > >>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> > >>>>>>>>> (uintptr_t)(&_xiprom);
> > >>>>>>>>> +
> > >>>>>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> > >>>>>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> > >>>>>>>>> +#endif
> > >>>>>>>>> va_pa_offset = PAGE_OFFSET - load_pa;
> > >>>>>>
> > >>>>>> I should have seen this before, I was too focused on having a XIP
> > >>>>>> kernel
> > >>>>>> boot. I already moved the kernel mapping in the vmalloc zone: the
> > >>>>>> virtual to physical translations need to be handled differently
> > >>>>>> now that
> > >>>>>> the kernel mapping does not lie into linear mapping anymore, we can't
> > >>>>>> use va_pa_offset defined above for both mappings.
> > >>>>>>
> > >>>>>> I was rebasing my patchset on the XIP patch but I believe that
> > >>>>>> doing the
> > >>>>>> other way around would greatly simplify the XIP patch as the kernel
> > >>>>>> mapping would already be moved outside the linear mapping, there
> > >>>>>> would
> > >>>>>> be no need to reserve a zone in vmalloc anymore (that simplifies
> > >>>>>> pgtable.h quite a lot). And the XIP kernel mapping could be
> > >>>>>> implemented
> > >>>>>> in a new create_kernel_page_table (that would also simplify
> > >>>>>> mm/init.c).
> > >>>>>>
> > >>>>>> I can help to do that but I don't think we should merge this patch
> > >>>>>> as is
> > >>>>>> now.
> > >>>>>
> > >>>>> I think that's the right way to go for now: it's a lot harder to test
> > >>>>> the XIP stuff, as it requires a bunch of harness changes. So let's
> > >>>>> take the page table refactoring in now and rebase this stuff on top of
> > >>>>> it. There's really no way to do both without making more work for
> > >>>>> someone, it's just a headache on timing.
> > >>>>>
> > >>>>> Alex: if you want to sign up to spend some time there that'd be great,
> > >>>>> otherwise I will.
> > >>>>
> > >>>> I can take care of that, no problem.
> > >>>
> > >>> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
> > >>> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my
> > >>> setup.
> > >>>
> > >>> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
> > >>> any other kernel at the end of the address space, not in the vmalloc
> > >>> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
> > >>> pfn_valid, copy_data and other stuff).
> > >>>
> > >>> Any comment is welcome !
> > >>
> > >> thanks for your efforts!
> > >>
> > >> I've just built your version. The build went well, but the image
> > >> doesn't seem to boot for me.
> > >
> > > Too bad. Can you give me your config please ?
> > >
> >
> > Apparently, as you can see below, your config works for me, at least it
> > reaches userspace. Do you have traces or more info about what is wrong ?
>
> Console output is just the same but it stops after the following line:
> [ 0.003208] Console: colour dummy device 80x25
>
> I did some very simplistic debugging bisecting start_kernel()
> execution and I could see that setup_per_cpu_pageset() was reached
> while calibrate_delay() was not.
>
> How (and whether) this might be related to XIP I don't know :)
A short update: the system would hang in sched_clock_init() if run
with 'go 21000000' command.
If I use 'booti' command it passes and goes further all the way to
mounting the userspace
So the problem is rather SMP related than XIP related.
Best regards,
Vitaly
> > Thanks!
> >
> > [ 0.000000] Linux version 5.12.0-rc2 (alex@debian)
> > (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.11.2) 9.3.0,
> > GNU ld (GNU Binutils) 2.34) #322 SMP Sat Apr 3 05:50:18 EDT 2021
> > [ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit
> > [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
> > [ 0.000000] printk: bootconsole [sbi0] enabled
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff]
> > [ 0.000000] Normal empty
> > [ 0.000000] Movable zone start for each node
> > [ 0.000000] Early memory node ranges
> > [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff]
> > [ 0.000000] Initmem setup node 0 [mem
> > 0x0000000080000000-0x00000000bfffffff]
> > [ 0.000000] On node 0 totalpages: 262144
> > [ 0.000000] DMA32 zone: 3584 pages used for memmap
> > [ 0.000000] DMA32 zone: 0 pages reserved
> > [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
> > [ 0.000000] SBI specification v0.2 detected
> > [ 0.000000] SBI implementation ID=0x1 Version=0x6
> > [ 0.000000] SBI v0.2 TIME extension detected
> > [ 0.000000] SBI v0.2 IPI extension detected
> > [ 0.000000] SBI v0.2 RFENCE extension detected
> > [ 0.000000] software IO TLB: mapped [mem
> > 0x00000000b9e00000-0x00000000bde00000] (64MB)
> > [ 0.000000] CPU with hartid=0 is not available
> > [ 0.000000] CPU with hartid=0 is not available
> > [ 0.000000] riscv: ISA extensions acdfim
> > [ 0.000000] riscv: ELF capabilities acdfim
> > [ 0.000000] percpu: Embedded 17 pages/cpu s29856 r8192 d31584 u69632
> > [ 0.000000] pcpu-alloc: s29856 r8192 d31584 u69632 alloc=17*4096
> > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258560
> > [ 0.000000] Kernel command line: earlyprintk debug earlycon=sbi
> > console=ttyS0,115200n8 root=/dev/ram0 init=/sbin/init
> > [ 0.000000] Dentry cache hash table entries: 131072 (order: 8,
> > 1048576 bytes, linear)
> > [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288
> > bytes, linear)
> > [ 0.000000] Sorting __ex_table...
> > [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> > [ 0.000000] Memory: 947732K/1048576K available (2999K kernel code,
> > 692K rwdata, 953K rodata, 205K init, 247K bss, 100844K reserved, 0K
> > cma-reserved)
> > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > [ 0.000000] rcu: Hierarchical RCU implementation.
> > [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> > [ 0.000000] rcu: RCU debug extended QS entry/exit.
> > [ 0.000000] Tracing variant of Tasks RCU enabled.
> > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> > is 25 jiffies.
> > [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> > [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> > [ 0.000000] CPU with hartid=0 is not available
> > [ 0.000000] riscv-intc: unable to find hart id for
> > /cpus/cpu@0/interrupt-controller
> > [ 0.000000] riscv-intc: 64 local interrupts mapped
> > [ 0.000000] plic: interrupt-controller@c000000: mapped 186 interrupts
> > with 4 handlers for 9 contexts.
> > [ 0.000000] random: get_random_bytes called from
> > start_kernel+0x2fe/0x49c with crng_init=0
> > [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0]
> > hartid [1]
> > [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff
> > max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
> > [ 0.000146] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps
> > every 2199023255500ns
> > [ 0.006056] Console: colour dummy device 80x25
> > [ 0.015242] Calibrating delay loop (skipped), value calculated using
> > timer frequency.. 2.00 BogoMIPS (lpj=4000)
> > [ 0.017130] pid_max: default: 32768 minimum: 301
> > [ 0.020115] Mount-cache hash table entries: 2048 (order: 2, 16384
> > bytes, linear)
> > [ 0.021097] Mountpoint-cache hash table entries: 2048 (order: 2,
> > 16384 bytes, linear)
> > [ 0.078755] ASID allocator using 16 bits (65536 entries)
> > [ 0.083669] rcu: Hierarchical SRCU implementation.
> > [ 0.093304] smp: Bringing up secondary CPUs ...
> > [ 1.149900] CPU1: failed to come online
> > [ 2.204183] CPU2: failed to come online
> > [ 3.256211] CPU3: failed to come online
> > [ 3.257043] smp: Brought up 1 node, 1 CPU
> > [ 3.269554] devtmpfs: initialized
> > [ 3.282015] clocksource: jiffies: mask: 0xffffffff max_cycles:
> > 0xffffffff, max_idle_ns: 7645041785100000 ns
> > [ 3.283484] futex hash table entries: 1024 (order: 4, 65536 bytes,
> > linear)
> > [ 3.381718] SCSI subsystem initialized
> > [ 3.385115] clocksource: Switched to clocksource riscv_clocksource
> > [ 3.602198] workingset: timestamp_bits=62 max_order=18 bucket_order=0
> > [ 3.624182] Block layer SCSI generic (bsg) driver version 0.4 loaded
> > (major 253)
> > [ 3.625988] io scheduler mq-deadline registered
> > [ 3.626725] io scheduler kyber registered
> > [ 3.629047] start plist test
> > [ 3.641420] end plist test
> > [ 3.717639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> > [ 3.752315] brd: module loaded
> > [ 3.790207] loop: module loaded
> > [ 3.793943] mousedev: PS/2 mouse device common for all mice
> > [ 3.810511] Warning: unable to open an initial console.
> > [ 3.811923] Freeing unused kernel memory: 88K
> > [ 3.812558] This architecture does not have kernel memory protection.
> > [ 3.814280] Run /init as init process
> > [ 3.814808] with arguments:
> > [ 3.815227] /init
> > [ 3.815539] with environment:
> > [ 3.815924] HOME=/
> > [ 3.816250] TERM=linux
> > [ 4.398678] random: dd: uninitialized urandom read (512 bytes read)
> >
> >
> > > Thanks,
> > >
> > > Alex
> > >
> > >> I'll take a look at the code later today.
> > >>
> > >> Best regards,
> > >> Vitaly
> > >>
> > >>> Thanks,
> > >>>
> > >>> Alex
> > >>>
> > >>>>
> > >>>>> Either way, can you point me (either just indicate the old version is
> > >>>>> OK or send a new one) to what you want me to look at WRT the page
> > >>>>> table code? IIRC it looked pretty much fine, but I'll take another
> > >>>>> look ASAP so we can avoid serializing everything.
> > >>>>
> > >>>> The v3 is fine for me:
> > >>>> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
> > >>>>
> > >>>>>
> > >>>>>>
> > >>>>>> Alex
> > >>>>>>
> > >>>>>>>>> pfn_base = PFN_DOWN(load_pa);
> > >>>>>>>>>
> > >>>>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
> > >>>>>>>>> dtb_pa)
> > >>>>>>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> > >>>>>>>>> #endif
> > >>>>>>>>>
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> > >>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
> > >>>>>>>>> PAGE_TABLE);
> > >>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
> > >>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > >>>>>>>>> + va += PMD_SIZE) {
> > >>>>>>>>> + create_pmd_mapping(xip_pmd, va,
> > >>>>>>>>> + xiprom + (va -
> > >>>>>>>>> XIP_VIRT_ADDR_START),
> > >>>>>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
> > >>>>>>>>> + }
> > >>>>>>>>> +
> > >>>>>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> > >>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
> > >>>>>>>>> PAGE_TABLE);
> > >>>>>>>>> +#endif
> > >>>>>>>>> +
> > >>>>>>>>> /*
> > >>>>>>>>> * Setup early PGD covering entire kernel which will
> > >>>>>>>>> allows
> > >>>>>>>>> * us to reach paging_init(). We map all memory banks
> > >>>>>>>>> later
> > >>>>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t
> > >>>>>>>>> dtb_pa)
> > >>>>>>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> > >>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> > >>>>>>>>> (PMD_SIZE - 1));
> > >>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
> > >>>>>>>>> - dtb_early_va = __va(dtb_pa);
> > >>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> > >>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
> > >>>>>>>>> #else
> > >>>>>>>>> #ifndef CONFIG_BUILTIN_DTB
> > >>>>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t
> > >>>>>>>>> dtb_pa)
> > >>>>>>>>> pa + PGDIR_SIZE, PGDIR_SIZE,
> > >>>>>>>>> PAGE_KERNEL);
> > >>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> > >>>>>>>>> (PGDIR_SIZE - 1));
> > >>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
> > >>>>>>>>> - dtb_early_va = __va(dtb_pa);
> > >>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> > >>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
> > >>>>>>>>> #endif
> > >>>>>>>>> dtb_early_pa = dtb_pa;
> > >>>>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> > >>>>>>>>> uintptr_t va, map_size;
> > >>>>>>>>> phys_addr_t pa, start, end;
> > >>>>>>>>> u64 i;
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> > >>>>>>>>> (uintptr_t)(&_xiprom);
> > >>>>>>>>> +#endif
> > >>>>>>>>>
> > >>>>>>>>> /**
> > >>>>>>>>> * MMU is enabled at this point. But page table setup is
> > >>>>>>>>> not complete yet.
> > >>>>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> > >>>>>>>>> map_size,
> > >>>>>>>>> PAGE_KERNEL_EXEC);
> > >>>>>>>>> }
> > >>>>>>>>> }
> > >>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> > >>>>>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> > >>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
> > >>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > >>>>>>>>> + va += map_size)
> > >>>>>>>>> + create_pgd_mapping(swapper_pg_dir, va,
> > >>>>>>>>> + CONFIG_XIP_PHYS_ADDR + (va -
> > >>>>>>>>> XIP_VIRT_ADDR_START),
> > >>>>>>>>> + map_size, PAGE_KERNEL_EXEC);
> > >>>>>>>>> +
> > >>>>>>>>> +#endif
> > >>>>>>>>>
> > >>>>>>>>> /* Clear fixmap PTE and PMD mappings */
> > >>>>>>>>> clear_fixmap(FIX_PTE);
> > >>>>>>>
> > >>>>>>> _______________________________________________
> > >>>>>>> linux-riscv mailing list
> > >>>>>>> [email protected]
> > >>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> > >>>>>>>
> > >>>>>
> > >>>>> _______________________________________________
> > >>>>> linux-riscv mailing list
> > >>>>> [email protected]
> > >>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> > >>>>
> > >>>> _______________________________________________
> > >>>> linux-riscv mailing list
> > >>>> [email protected]
> > >>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> > >>
> > >> _______________________________________________
> > >> linux-riscv mailing list
> > >> [email protected]
> > >> http://lists.infradead.org/mailman/listinfo/linux-riscv
> > >>
On Tue, Apr 6, 2021 at 8:47 AM Alex Ghiti <[email protected]> wrote:
>
> Hi Vitaly,
>
> Le 4/5/21 à 4:34 AM, Vitaly Wool a écrit :
> > On Sun, Apr 4, 2021 at 10:39 AM Vitaly Wool <[email protected]> wrote:
> >>
> >> On Sat, Apr 3, 2021 at 12:00 PM Alex Ghiti <[email protected]> wrote:
> >>>
> >>> Hi Vitaly,
> >>>
> >>> Le 4/1/21 à 7:10 AM, Alex Ghiti a écrit :
> >>>> Le 4/1/21 à 4:52 AM, Vitaly Wool a écrit :
> >>>>> Hi Alex,
> >>>>>
> >>>>> On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <[email protected]> wrote:
> >>>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
> >>>>>>> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
> >>>>>>>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
> >>>>>>>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
> >>>>>>>>>> <[email protected]> wrote:
> >>>>>>>>>>>
> >>>>>>>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
> >>>>>>>>>>> wrote:
> >>>>>>>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> >>>>>>>>>>>> It allows code to be executed directly from non-volatile storage
> >>>>>>>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
> >>>>>>>>>>>> be found on many RISC-V platforms. This makes way for significant
> >>>>>>>>>>>> optimization of RAM footprint. The XIP kernel is not compressed
> >>>>>>>>>>>> since it has to run directly from flash, so it will occupy more
> >>>>>>>>>>>> space on the non-volatile storage. The physical flash address used
> >>>>>>>>>>>> to link the kernel object files and for storing it has to be known
> >>>>>>>>>>>> at compile time and is represented by a Kconfig option.
> >>>>>>>>>>>>
> >>>>>>>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
> >>>>>>>>>>>> kernels.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Signed-off-by: Vitaly Wool <[email protected]>
> >>>>>>>>>>>>
> >>>>>>>>>>>> ---
> >>>>>>>>>>>>
> >>>>>>>>>>>> Changes in v2:
> >>>>>>>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled
> >>>>>>>>>>>> yet
> >>>>>>>>>>>> o both for 32-bit and 64-bit RISC-V
> >>>>>>>>>>>> - SP is explicitly set to a safe place in RAM before
> >>>>>>>>>>>> __copy_data call
> >>>>>>>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
> >>>>>>>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> >>>>>>>>>>>> Changes in v3:
> >>>>>>>>>>>> - rebased against latest for-next
> >>>>>>>>>>>> - XIP address fixup macro now takes an argument
> >>>>>>>>>>>> - SMP related fixes
> >>>>>>>>>>>> Changes in v4:
> >>>>>>>>>>>> - rebased against the current for-next
> >>>>>>>>>>>> - less #ifdef's in C/ASM code
> >>>>>>>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
> >>>>>>>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
> >>>>>>>>>>>> - Fixed multi-core boot
> >>>>>>>>>>>> Changes in v5:
> >>>>>>>>>>>> - fixed build error for non-XIP kernels
> >>>>>>>>>>>> Changes in v6:
> >>>>>>>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
> >>>>>>>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
> >>>>>>>>>>>> PHYS_RAM_BASE in non-XIP configurations if needed
> >>>>>>>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid
> >>>>>>>>>>>> side
> >>>>>>>>>>>> effects
> >>>>>>>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
> >>>>>>>>>>>
> >>>>>>>>>>> So v5 landed on for-next, which generally means it's best to avoid
> >>>>>>>>>>> re-spinning the patch and instead send along fixups. That said,
> >>>>>>>>>>> the v5
> >>>>>>>>>>> is causing some testing failures for me.
> >>>>>>>>>>>
> >>>>>>>>>>> I'm going to drop the v5 for now as I don't have time to test this
> >>>>>>>>>>> tonight. I'll try and take a look soon, as it will conflict with
> >>>>>>>>>>> Alex's
> >>>>>>>>>>> patches.
> >>>>>>>>>>
> >>>>>>>>>> I can come up with the incremental patch instead pretty much
> >>>>>>>>>> straight
> >>>>>>>>>> away if that works better.
> >>>>>>>>>>
> >>>>>>>>>> ~Vitaly
> >>>>>>>>>>
> >>>>>>>>>>>> arch/riscv/Kconfig | 49 ++++++++++-
> >>>>>>>>>>>> arch/riscv/Makefile | 8 +-
> >>>>>>>>>>>> arch/riscv/boot/Makefile | 13 +++
> >>>>>>>>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
> >>>>>>>>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
> >>>>>>>>>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
> >>>>>>>>>>>> arch/riscv/kernel/head.h | 3 +
> >>>>>>>>>>>> arch/riscv/kernel/setup.c | 8 +-
> >>>>>>>>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132
> >>>>>>>>>>>> ++++++++++++++++++++++++++++
> >>>>>>>>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> >>>>>>>>>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
> >>>>>>>>>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
> >>>>>>>>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>>>>>
> >>>>>>>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >>>>>>>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
> >>>>>>>>>>>> --- a/arch/riscv/Kconfig
> >>>>>>>>>>>> +++ b/arch/riscv/Kconfig
> >>>>>>>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
> >>>>>>>>>>>>
> >>>>>>>>>>>> config EFI
> >>>>>>>>>>>> bool "UEFI runtime support"
> >>>>>>>>>>>> - depends on OF
> >>>>>>>>>>>> + depends on OF && !XIP_KERNEL
> >>>>>>>>>>>> select LIBFDT
> >>>>>>>>>>>> select UCS2_STRING
> >>>>>>>>>>>> select EFI_PARAMS_FROM_FDT
> >>>>>>>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
> >>>>>>>>>>>> def_bool y
> >>>>>>>>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
> >>>>>>>>>>>>
> >>>>>>>>>>>> +config PHYS_RAM_BASE_FIXED
> >>>>>>>>>>>> + bool "Explicitly specified physical RAM address"
> >>>>>>>>>>>> + default n
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +config PHYS_RAM_BASE
> >>>>>>>>>>>> + hex "Platform Physical RAM address"
> >>>>>>>>>>>> + depends on PHYS_RAM_BASE_FIXED
> >>>>>>>>>>>> + default "0x80000000"
> >>>>>>>>>>>> + help
> >>>>>>>>>>>> + This is the physical address of RAM in the system. It has
> >>>>>>>>>>>> to be
> >>>>>>>>>>>> + explicitly specified to run early relocations of
> >>>>>>>>>>>> read-write data
> >>>>>>>>>>>> + from flash to RAM.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +config XIP_KERNEL
> >>>>>>>>>>>> + bool "Kernel Execute-In-Place from ROM"
> >>>>>>>>>>>> + depends on MMU
> >>>>>>>>>>>> + select PHYS_RAM_BASE_FIXED
> >>>>>>>>>>>> + help
> >>>>>>>>>>>> + Execute-In-Place allows the kernel to run from
> >>>>>>>>>>>> non-volatile storage
> >>>>>>>>>>>> + directly addressable by the CPU, such as NOR flash. This
> >>>>>>>>>>>> saves RAM
> >>>>>>>>>>>> + space since the text section of the kernel is not loaded
> >>>>>>>>>>>> from flash
> >>>>>>>>>>>> + to RAM. Read-write sections, such as the data section and
> >>>>>>>>>>>> stack,
> >>>>>>>>>>>> + are still copied to RAM. The XIP kernel is not compressed
> >>>>>>>>>>>> since
> >>>>>>>>>>>> + it has to run directly from flash, so it will take more
> >>>>>>>>>>>> space to
> >>>>>>>>>>>> + store it. The flash address used to link the kernel
> >>>>>>>>>>>> object files,
> >>>>>>>>>>>> + and for storing it, is configuration dependent. Therefore,
> >>>>>>>>>>>> if you
> >>>>>>>>>>>> + say Y here, you must know the proper physical address
> >>>>>>>>>>>> where to
> >>>>>>>>>>>> + store the kernel image depending on your own flash memory
> >>>>>>>>>>>> usage.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + Also note that the make target becomes "make xipImage"
> >>>>>>>>>>>> rather than
> >>>>>>>>>>>> + "make zImage" or "make Image". The final kernel binary to
> >>>>>>>>>>>> put in
> >>>>>>>>>>>> + ROM memory will be arch/riscv/boot/xipImage.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + If unsure, say N.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +config XIP_PHYS_ADDR
> >>>>>>>>>>>> + hex "XIP Kernel Physical Location"
> >>>>>>>>>>>> + depends on XIP_KERNEL
> >>>>>>>>>>>> + default "0x21000000"
> >>>>>>>>>>>> + help
> >>>>>>>>>>>> + This is the physical address in your flash memory the
> >>>>>>>>>>>> kernel will
> >>>>>>>>>>>> + be linked for and stored to. This address is dependent on
> >>>>>>>>>>>> your
> >>>>>>>>>>>> + own flash usage.
> >>>>>>>>>>>> +
> >>>>>>>>>>>> endmenu
> >>>>>>>>>>>>
> >>>>>>>>>>>> config BUILTIN_DTB
> >>>>>>>>>>>> - def_bool n
> >>>>>>>>>>>> + bool
> >>>>>>>>>>>> depends on OF
> >>>>>>>>>>>> + default y if XIP_KERNEL
> >>>>>>>>>>>>
> >>>>>>>>>>>> menu "Power management options"
> >>>>>>>>>>>>
> >>>>>>>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> >>>>>>>>>>>> index 1368d943f1f3..8fcbec03974d 100644
> >>>>>>>>>>>> --- a/arch/riscv/Makefile
> >>>>>>>>>>>> +++ b/arch/riscv/Makefile
> >>>>>>>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >>>>>>>>>>>>
> >>>>>>>>>>>> # Default target when executing plain make
> >>>>>>>>>>>> boot := arch/riscv/boot
> >>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>>>>>>>> +KBUILD_IMAGE := $(boot)/xipImage
> >>>>>>>>>>>> +else
> >>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>>>>>>>> +endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> head-y := arch/riscv/kernel/head.o
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
> >>>>>>>>>>>> vdso_install:
> >>>>>>>>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> >>>>>>>>>>>>
> >>>>>>>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
> >>>>>>>>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> >>>>>>>>>>>> KBUILD_IMAGE := $(boot)/loader.bin
> >>>>>>>>>>>> else
> >>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
> >>>>>>>>>>>> endif
> >>>>>>>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
> >>>>>>>>>>>> +endif
> >>>>>>>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> >>>>>>>>>>>>
> >>>>>>>>>>>> all: $(notdir $(KBUILD_IMAGE))
> >>>>>>>>>>>>
> >>>>>>>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> >>>>>>>>>>>> index 03404c84f971..6bf299f70c27 100644
> >>>>>>>>>>>> --- a/arch/riscv/boot/Makefile
> >>>>>>>>>>>> +++ b/arch/riscv/boot/Makefile
> >>>>>>>>>>>> @@ -17,8 +17,21 @@
> >>>>>>>>>>>> KCOV_INSTRUMENT := n
> >>>>>>>>>>>>
> >>>>>>>>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R
> >>>>>>>>>>>> .note.gnu.build-id -R
> >>>>>>>>>>>> .comment -S
> >>>>>>>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
> >>>>>>>>>>>> -R .comment -S
> >>>>>>>>>>>>
> >>>>>>>>>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>>>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
> >>>>>>>>>>>> xipImage
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> >>>>>>>>>>>> +cmd_mkxip = $(cmd_objcopy)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +$(obj)/xipImage: vmlinux FORCE
> >>>>>>>>>>>> + $(call if_changed,mkxip)
> >>>>>>>>>>>> + @$(kecho) ' Physical Address of xipImage:
> >>>>>>>>>>>> $(CONFIG_XIP_PHYS_ADDR)'
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> $(obj)/Image: vmlinux FORCE
> >>>>>>>>>>>> $(call if_changed,objcopy)
> >>>>>>>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
> >>>>>>>>>>>> b/arch/riscv/include/asm/pgtable.h
> >>>>>>>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
> >>>>>>>>>>>> --- a/arch/riscv/include/asm/pgtable.h
> >>>>>>>>>>>> +++ b/arch/riscv/include/asm/pgtable.h
> >>>>>>>>>>>> @@ -11,6 +11,33 @@
> >>>>>>>>>>>>
> >>>>>>>>>>>> #include <asm/pgtable-bits.h>
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_MMU
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
> >>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define XIP_OFFSET SZ_8M
> >>>>>>>>>>>> +#define XIP_MASK (SZ_8M - 1)
> >>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) \
> >>>>>>>>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +#endif /* CONFIG_MMU */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> #ifndef __ASSEMBLY__
> >>>>>>>>>>>>
> >>>>>>>>>>>> /* Page Upper Directory not used in RISC-V */
> >>>>>>>>>>>> @@ -21,9 +48,25 @@
> >>>>>>>>>>>>
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>>
> >>>>>>>>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> >>>>>>>>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
> >>>>>>>>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +/*
> >>>>>>>>>>>> + * Since we use sections to map it, this macro replaces the
> >>>>>>>>>>>> physical address
> >>>>>>>>>>>> + * with its virtual address while keeping offset from the base
> >>>>>>>>>>>> section.
> >>>>>>>>>>>> + */
> >>>>>>>>>>>> +#define XIP_PHYS_ADDR(va) \
> >>>>>>>>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
> >>>>>>>>>>>> CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define XIP_FIXUP(addr) ({ \
> >>>>>>>>>>>> + uintptr_t __a = (uintptr_t)(addr); \
> >>>>>>>>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
> >>>>>>>>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> >>>>>>>>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
> >>>>>>>>>>>> XIP_OFFSET : __a; \
> >>>>>>>>>>>> +})
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +#define XIP_FIXUP(addr) (addr)
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>>
> >>>>>>>>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
> >>>>>>>>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET -
> >>>>>>>>>>>> BPF_JIT_REGION_SIZE)
> >>>>>>>>>>>> @@ -484,8 +527,20 @@ static inline int
> >>>>>>>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
> >>>>>>>>>>>>
> >>>>>>>>>>>> #define kern_addr_valid(addr) (1) /* FIXME */
> >>>>>>>>>>>>
> >>>>>>>>>>>> -extern void *dtb_early_va;
> >>>>>>>>>>>> -extern uintptr_t dtb_early_pa;
> >>>>>>>>>>>> +extern void *_dtb_early_va;
> >>>>>>>>>>>> +extern uintptr_t _dtb_early_pa;
> >>>>>>>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> >>>>>>>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define dtb_early_va _dtb_early_va
> >>>>>>>>>>>> +#define dtb_early_pa _dtb_early_pa
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> void setup_bootmem(void);
> >>>>>>>>>>>> void paging_init(void);
> >>>>>>>>>>>> void misc_mem_init(void);
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>>>>> index 685fae72b7f5..2413c2997350 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> >>>>>>>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
> >>>>>>>>>>>> long hartid)
> >>>>>>>>>>>> }
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> +static inline unsigned long get_secondary_start_phys(void)
> >>>>>>>>>>>> +{
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> + return __pa_symbol(secondary_start_sbi);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +}
> >>>>>>>>>>>> +
> >>>>>>>>>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct
> >>>>>>>>>>>> *tidle)
> >>>>>>>>>>>> {
> >>>>>>>>>>>> int rc;
> >>>>>>>>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> >>>>>>>>>>>> + unsigned long boot_addr = get_secondary_start_phys();
> >>>>>>>>>>>> int hartid = cpuid_to_hartid_map(cpuid);
> >>>>>>>>>>>>
> >>>>>>>>>>>> cpu_update_secondary_bootdata(cpuid, tidle);
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> >>>>>>>>>>>> index f5a9bad86e58..bbe74e37914f 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/head.S
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/head.S
> >>>>>>>>>>>> @@ -9,11 +9,23 @@
> >>>>>>>>>>>> #include <linux/linkage.h>
> >>>>>>>>>>>> #include <asm/thread_info.h>
> >>>>>>>>>>>> #include <asm/page.h>
> >>>>>>>>>>>> +#include <asm/pgtable.h>
> >>>>>>>>>>>> #include <asm/csr.h>
> >>>>>>>>>>>> #include <asm/hwcap.h>
> >>>>>>>>>>>> #include <asm/image.h>
> >>>>>>>>>>>> #include "efi-header.S"
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>>>>>>>> + REG_L t0, _xip_fixup
> >>>>>>>>>>>> + add \reg, \reg, t0
> >>>>>>>>>>>> +.endm
> >>>>>>>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
> >>>>>>>>>>>> XIP_OFFSET
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
> >>>>>>>>>>>> +.endm
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> __HEAD
> >>>>>>>>>>>> ENTRY(_start)
> >>>>>>>>>>>> /*
> >>>>>>>>>>>> @@ -69,7 +81,11 @@ pe_head_start:
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>> relocate:
> >>>>>>>>>>>> /* Relocate return address */
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> li a1, PAGE_OFFSET
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> la a2, _start
> >>>>>>>>>>>> sub a1, a1, a2
> >>>>>>>>>>>> add ra, ra, a1
> >>>>>>>>>>>> @@ -91,6 +107,7 @@ relocate:
> >>>>>>>>>>>> * to ensure the new translations are in use.
> >>>>>>>>>>>> */
> >>>>>>>>>>>> la a0, trampoline_pg_dir
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>>>>>>>> srl a0, a0, PAGE_SHIFT
> >>>>>>>>>>>> or a0, a0, a1
> >>>>>>>>>>>> sfence.vma
> >>>>>>>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
> >>>>>>>>>>>>
> >>>>>>>>>>>> slli a3, a0, LGREG
> >>>>>>>>>>>> la a4, __cpu_up_stack_pointer
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a4
> >>>>>>>>>>>> la a5, __cpu_up_task_pointer
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a5
> >>>>>>>>>>>> add a4, a3, a4
> >>>>>>>>>>>> add a5, a3, a5
> >>>>>>>>>>>> REG_L sp, (a4)
> >>>>>>>>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>> /* Enable virtual memory and relocate to virtual
> >>>>>>>>>>>> address */
> >>>>>>>>>>>> la a0, swapper_pg_dir
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>>>>>>>> call relocate
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>> call setup_trap_vector
> >>>>>>>>>>>> @@ -236,12 +256,33 @@ pmp_done:
> >>>>>>>>>>>> .Lgood_cores:
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> /* Pick one hart to run the main boot sequence */
> >>>>>>>>>>>> la a3, hart_lottery
> >>>>>>>>>>>> li a2, 1
> >>>>>>>>>>>> amoadd.w a3, a2, (a3)
> >>>>>>>>>>>> bnez a3, .Lsecondary_start
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> + /* hart_lottery in flash contains a magic number */
> >>>>>>>>>>>> + la a3, hart_lottery
> >>>>>>>>>>>> + mv a2, a3
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>>>>>>>> + lw t1, (a3)
> >>>>>>>>>>>> + amoswap.w t0, t1, (a2)
> >>>>>>>>>>>> + /* first time here if hart_lottery in RAM is not set */
> >>>>>>>>>>>> + beq t0, t1, .Lsecondary_start
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + la sp, _end + THREAD_SIZE
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>>>>>>>> + mv s0, a0
> >>>>>>>>>>>> + call __copy_data
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + /* Restore a0 copy */
> >>>>>>>>>>>> + mv a0, s0
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> /* Clear BSS for flat non-ELF images */
> >>>>>>>>>>>> la a3, __bss_start
> >>>>>>>>>>>> la a4, __bss_stop
> >>>>>>>>>>>> @@ -251,15 +292,18 @@ clear_bss:
> >>>>>>>>>>>> add a3, a3, RISCV_SZPTR
> >>>>>>>>>>>> blt a3, a4, clear_bss
> >>>>>>>>>>>> clear_bss_done:
> >>>>>>>>>>>> -
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> /* Save hart ID and DTB physical address */
> >>>>>>>>>>>> mv s0, a0
> >>>>>>>>>>>> mv s1, a1
> >>>>>>>>>>>> +
> >>>>>>>>>>>> la a2, boot_cpu_hartid
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>>>>>>>> REG_S a0, (a2)
> >>>>>>>>>>>>
> >>>>>>>>>>>> /* Initialize page tables and relocate to virtual
> >>>>>>>>>>>> addresses */
> >>>>>>>>>>>> la sp, init_thread_union + THREAD_SIZE
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET sp
> >>>>>>>>>>>> #ifdef CONFIG_BUILTIN_DTB
> >>>>>>>>>>>> la a0, __dtb_start
> >>>>>>>>>>>> #else
> >>>>>>>>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
> >>>>>>>>>>>> call setup_vm
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>> la a0, early_pg_dir
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
> >>>>>>>>>>>> call relocate
> >>>>>>>>>>>> #endif /* CONFIG_MMU */
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
> >>>>>>>>>>>>
> >>>>>>>>>>>> slli a3, a0, LGREG
> >>>>>>>>>>>> la a1, __cpu_up_stack_pointer
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a1
> >>>>>>>>>>>> la a2, __cpu_up_task_pointer
> >>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
> >>>>>>>>>>>> add a1, a3, a1
> >>>>>>>>>>>> add a2, a3, a2
> >>>>>>>>>>>>
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> >>>>>>>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/head.h
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/head.h
> >>>>>>>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> >>>>>>>>>>>>
> >>>>>>>>>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
> >>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +asmlinkage void __init __copy_data(void);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> extern void *__cpu_up_stack_pointer[];
> >>>>>>>>>>>> extern void *__cpu_up_task_pointer[];
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> >>>>>>>>>>>> index e85bacff1b50..a0384c72c272 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/setup.c
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/setup.c
> >>>>>>>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
> >>>>>>>>>>>> __section(".data") = {
> >>>>>>>>>>>> * This is used before the kernel initializes the BSS so it
> >>>>>>>>>>>> can't be in the
> >>>>>>>>>>>> * BSS.
> >>>>>>>>>>>> */
> >>>>>>>>>>>> -atomic_t hart_lottery __section(".sdata");
> >>>>>>>>>>>> +atomic_t hart_lottery __section(".sdata")
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> += ATOMIC_INIT(0xC001BEEF)
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +;
> >>>>>>>>>>>> unsigned long boot_cpu_hartid;
> >>>>>>>>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
> >>>>>>>>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> >>>>>>>>>>>> unflatten_and_copy_device_tree();
> >>>>>>>>>>>> #else
> >>>>>>>>>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
> >>>>>>>>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> >>>>>>>>>>>> unflatten_device_tree();
> >>>>>>>>>>>> else
> >>>>>>>>>>>> pr_err("No DTB found in kernel mappings\n");
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>>>>> new file mode 100644
> >>>>>>>>>>>> index 000000000000..9f0f08c34cd3
> >>>>>>>>>>>> --- /dev/null
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> >>>>>>>>>>>> @@ -0,0 +1,132 @@
> >>>>>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
> >>>>>>>>>>>> +/*
> >>>>>>>>>>>> + * Copyright (C) 2012 Regents of the University of California
> >>>>>>>>>>>> + * Copyright (C) 2017 SiFive
> >>>>>>>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> >>>>>>>>>>>> + */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> >>>>>>>>>>>> +/* No __ro_after_init data in the .rodata section - which will
> >>>>>>>>>>>> always be ro */
> >>>>>>>>>>>> +#define RO_AFTER_INIT_DATA
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#include <asm/vmlinux.lds.h>
> >>>>>>>>>>>> +#include <asm/page.h>
> >>>>>>>>>>>> +#include <asm/pgtable.h>
> >>>>>>>>>>>> +#include <asm/cache.h>
> >>>>>>>>>>>> +#include <asm/thread_info.h>
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +OUTPUT_ARCH(riscv)
> >>>>>>>>>>>> +ENTRY(_start)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +jiffies = jiffies_64;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +SECTIONS
> >>>>>>>>>>>> +{
> >>>>>>>>>>>> + /* Beginning of code and text segment */
> >>>>>>>>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> >>>>>>>>>>>> + _xiprom = .;
> >>>>>>>>>>>> + _start = .;
> >>>>>>>>>>>> + HEAD_TEXT_SECTION
> >>>>>>>>>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
> >>>>>>>>>>>> + /* we have to discard exit text and such at runtime, not
> >>>>>>>>>>>> link time */
> >>>>>>>>>>>> + .exit.text :
> >>>>>>>>>>>> + {
> >>>>>>>>>>>> + EXIT_TEXT
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + .text : {
> >>>>>>>>>>>> + _text = .;
> >>>>>>>>>>>> + _stext = .;
> >>>>>>>>>>>> + TEXT_TEXT
> >>>>>>>>>>>> + SCHED_TEXT
> >>>>>>>>>>>> + CPUIDLE_TEXT
> >>>>>>>>>>>> + LOCK_TEXT
> >>>>>>>>>>>> + KPROBES_TEXT
> >>>>>>>>>>>> + ENTRY_TEXT
> >>>>>>>>>>>> + IRQENTRY_TEXT
> >>>>>>>>>>>> + SOFTIRQENTRY_TEXT
> >>>>>>>>>>>> + *(.fixup)
> >>>>>>>>>>>> + _etext = .;
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + RO_DATA(L1_CACHE_BYTES)
> >>>>>>>>>>>> + .srodata : {
> >>>>>>>>>>>> + *(.srodata*)
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + .init.rodata : {
> >>>>>>>>>>>> + INIT_SETUP(16)
> >>>>>>>>>>>> + INIT_CALLS
> >>>>>>>>>>>> + CON_INITCALL
> >>>>>>>>>>>> + INIT_RAM_FS
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + _exiprom = .; /* End of XIP ROM area */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +/*
> >>>>>>>>>>>> + * From this point, stuff is considered writable and will be
> >>>>>>>>>>>> copied to RAM
> >>>>>>>>>>>> + */
> >>>>>>>>>>>> + __data_loc = ALIGN(16); /* location in file */
> >>>>>>>>>>>> + . = PAGE_OFFSET; /* location in memory */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + _sdata = .; /* Start of data section */
> >>>>>>>>>>>> + _data = .;
> >>>>>>>>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> >>>>>>>>>>>> + _edata = .;
> >>>>>>>>>>>> + __start_ro_after_init = .;
> >>>>>>>>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
> >>>>>>>>>>>> LOAD_OFFSET) {
> >>>>>>>>>>>> + *(.data..ro_after_init)
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + __end_ro_after_init = .;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>>>>>>>> + __init_begin = .;
> >>>>>>>>>>>> + .init.data : {
> >>>>>>>>>>>> + INIT_DATA
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + .exit.data : {
> >>>>>>>>>>>> + EXIT_DATA
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + . = ALIGN(8);
> >>>>>>>>>>>> + __soc_early_init_table : {
> >>>>>>>>>>>> + __soc_early_init_table_start = .;
> >>>>>>>>>>>> + KEEP(*(__soc_early_init_table))
> >>>>>>>>>>>> + __soc_early_init_table_end = .;
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + __soc_builtin_dtb_table : {
> >>>>>>>>>>>> + __soc_builtin_dtb_table_start = .;
> >>>>>>>>>>>> + KEEP(*(__soc_builtin_dtb_table))
> >>>>>>>>>>>> + __soc_builtin_dtb_table_end = .;
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>>>>>>>> + __init_end = .;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + .sdata : {
> >>>>>>>>>>>> + __global_pointer$ = . + 0x800;
> >>>>>>>>>>>> + *(.sdata*)
> >>>>>>>>>>>> + *(.sbss*)
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> >>>>>>>>>>>> + EXCEPTION_TABLE(0x10)
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> >>>>>>>>>>>> + *(.rel.dyn*)
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + /*
> >>>>>>>>>>>> + * End of copied data. We need a dummy section to get its
> >>>>>>>>>>>> LMA.
> >>>>>>>>>>>> + * Also located before final ALIGN() as trailing padding is
> >>>>>>>>>>>> not stored
> >>>>>>>>>>>> + * in the resulting binary file and useless to copy.
> >>>>>>>>>>>> + */
> >>>>>>>>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> >>>>>>>>>>>> + _edata_loc = LOADADDR(.data.endmark);
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
> >>>>>>>>>>>> + _end = .;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + STABS_DEBUG
> >>>>>>>>>>>> + DWARF_DEBUG
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + DISCARDS
> >>>>>>>>>>>> +}
> >>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>>>>> b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>>>>> index de03cb22d0e9..6745ec325930 100644
> >>>>>>>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
> >>>>>>>>>>>> @@ -4,7 +4,12 @@
> >>>>>>>>>>>> * Copyright (C) 2017 SiFive
> >>>>>>>>>>>> */
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#include "vmlinux-xip.lds.S"
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +
> >>>>>>>>>>>> #define LOAD_OFFSET PAGE_OFFSET
> >>>>>>>>>>>> +
> >>>>>>>>>>>> #include <asm/vmlinux.lds.h>
> >>>>>>>>>>>> #include <asm/page.h>
> >>>>>>>>>>>> #include <asm/cache.h>
> >>>>>>>>>>>> @@ -132,3 +137,4 @@ SECTIONS
> >>>>>>>>>>>>
> >>>>>>>>>>>> DISCARDS
> >>>>>>>>>>>> }
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> >>>>>>>>>>>> index 7f5036fbee8c..efe649d41f95 100644
> >>>>>>>>>>>> --- a/arch/riscv/mm/init.c
> >>>>>>>>>>>> +++ b/arch/riscv/mm/init.c
> >>>>>>>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >>>>>>>>>>>>
> >>>>>>>>>>>> extern char _start[];
> >>>>>>>>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> >>>>>>>>>>>> -void *dtb_early_va __initdata;
> >>>>>>>>>>>> -uintptr_t dtb_early_pa __initdata;
> >>>>>>>>>>>> +void *_dtb_early_va __initdata;
> >>>>>>>>>>>> +uintptr_t _dtb_early_pa __initdata;
> >>>>>>>>>>>>
> >>>>>>>>>>>> struct pt_alloc_ops {
> >>>>>>>>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
> >>>>>>>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
> >>>>>>>>>>>> (unsigned long)VMALLOC_END);
> >>>>>>>>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> >>>>>>>>>>>> (unsigned long)high_memory);
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> >>>>>>>>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> }
> >>>>>>>>>>>> #else
> >>>>>>>>>>>> static void print_vm_layout(void) { }
> >>>>>>>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
> >>>>>>>>>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
> >>>>>>>>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + vmlinux_start = __pa_symbol(&_sdata);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +
> >>>>>>>>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
> >>>>>>>>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
> >>>>>>>>>>>> memblock_allow_resize();
> >>>>>>>>>>>> }
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +extern char _xiprom[], _exiprom[];
> >>>>>>>>>>>> +extern char _sdata[], _edata[];
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> #ifdef CONFIG_MMU
> >>>>>>>>>>>> -static struct pt_alloc_ops pt_ops;
> >>>>>>>>>>>> +static struct pt_alloc_ops _pt_ops;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
> >>>>>>>>>>>> +#else
> >>>>>>>>>>>> +#define pt_ops _pt_ops
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> unsigned long va_pa_offset;
> >>>>>>>>>>>> EXPORT_SYMBOL(va_pa_offset);
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define va_pa_offset (*((unsigned long
> >>>>>>>>>>>> *)XIP_FIXUP(&va_pa_offset)))
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> unsigned long pfn_base;
> >>>>>>>>>>>> EXPORT_SYMBOL(pfn_base);
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
> >>>>>>>>>>>> __page_aligned_bss;
> >>>>>>>>>>>>
> >>>>>>>>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata
> >>>>>>>>>>>> __aligned(PAGE_SIZE);
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +#define trampoline_pg_dir ((pgd_t
> >>>>>>>>>>>> *)XIP_FIXUP(trampoline_pg_dir))
> >>>>>>>>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> >>>>>>>>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
> >>>>>>>>>>>> pgprot_t prot)
> >>>>>>>>>>>> {
> >>>>>>>>>>>> unsigned long addr = __fix_to_virt(idx);
> >>>>>>>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
> >>>>>>>>>>>> __page_aligned_bss;
> >>>>>>>>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >>>>>>>>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata
> >>>>>>>>>>>> __aligned(PAGE_SIZE);
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> >>>>>>>>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> >>>>>>>>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
> >>>>>>>>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
> >>>>>>>>>>>> +
> >>>>>>>>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> >>>>>>>>>>>> {
> >>>>>>>>>>>> /* Before MMU is enabled */
> >>>>>>>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
> >>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>>>>>>>> return PMD_SIZE;
> >>>>>>>>>>>> }
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> +/* called from head.S with MMU off */
> >>>>>>>>>>>> +asmlinkage void __init __copy_data(void)
> >>>>>>>>>>>> +{
> >>>>>>>>>>>> + void *from = (void *)(&_sdata);
> >>>>>>>>>>>> + void *end = (void *)(&_end);
> >>>>>>>>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
> >>>>>>>>>>>> + size_t sz = (size_t)(end - from);
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + memcpy(to, from, sz);
> >>>>>>>>>>>> +}
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +
> >>>>>>>>>>>> /*
> >>>>>>>>>>>> * setup_vm() is called from head.S with MMU-off.
> >>>>>>>>>>>> *
> >>>>>>>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
> >>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
> >>>>>>>>>>>>
> >>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >>>>>>>>>>>> {
> >>>>>>>>>>>> - uintptr_t va, pa, end_va;
> >>>>>>>>>>>> + uintptr_t va, end_va;
> >>>>>>>>>>>> + uintptr_t __maybe_unused pa;
> >>>>>>>>>>>> uintptr_t load_pa = (uintptr_t)(&_start);
> >>>>>>>>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
> >>>>>>>>>>>> uintptr_t map_size;
> >>>>>>>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>>>>> dtb_pa)
> >>>>>>>>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> >>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>>>>>>>> (uintptr_t)(&_xiprom);
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> >>>>>>>>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> va_pa_offset = PAGE_OFFSET - load_pa;
> >>>>>>>>>
> >>>>>>>>> I should have seen this before, I was too focused on having a XIP
> >>>>>>>>> kernel
> >>>>>>>>> boot. I already moved the kernel mapping in the vmalloc zone: the
> >>>>>>>>> virtual to physical translations need to be handled differently
> >>>>>>>>> now that
> >>>>>>>>> the kernel mapping does not lie into linear mapping anymore, we can't
> >>>>>>>>> use va_pa_offset defined above for both mappings.
> >>>>>>>>>
> >>>>>>>>> I was rebasing my patchset on the XIP patch but I believe that
> >>>>>>>>> doing the
> >>>>>>>>> other way around would greatly simplify the XIP patch as the kernel
> >>>>>>>>> mapping would already be moved outside the linear mapping, there
> >>>>>>>>> would
> >>>>>>>>> be no need to reserve a zone in vmalloc anymore (that simplifies
> >>>>>>>>> pgtable.h quite a lot). And the XIP kernel mapping could be
> >>>>>>>>> implemented
> >>>>>>>>> in a new create_kernel_page_table (that would also simplify
> >>>>>>>>> mm/init.c).
> >>>>>>>>>
> >>>>>>>>> I can help to do that but I don't think we should merge this patch
> >>>>>>>>> as is
> >>>>>>>>> now.
> >>>>>>>>
> >>>>>>>> I think that's the right way to go for now: it's a lot harder to test
> >>>>>>>> the XIP stuff, as it requires a bunch of harness changes. So let's
> >>>>>>>> take the page table refactoring in now and rebase this stuff on top of
> >>>>>>>> it. There's really no way to do both without making more work for
> >>>>>>>> someone, it's just a headache on timing.
> >>>>>>>>
> >>>>>>>> Alex: if you want to sign up to spend some time there that'd be great,
> >>>>>>>> otherwise I will.
> >>>>>>>
> >>>>>>> I can take care of that, no problem.
> >>>>>>
> >>>>>> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
> >>>>>> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my
> >>>>>> setup.
> >>>>>>
> >>>>>> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
> >>>>>> any other kernel at the end of the address space, not in the vmalloc
> >>>>>> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
> >>>>>> pfn_valid, copy_data and other stuff).
> >>>>>>
> >>>>>> Any comment is welcome !
> >>>>>
> >>>>> thanks for your efforts!
> >>>>>
> >>>>> I've just built your version. The build went well, but the image
> >>>>> doesn't seem to boot for me.
> >>>>
> >>>> Too bad. Can you give me your config please ?
> >>>>
> >>>
> >>> Apparently, as you can see below, your config works for me, at least it
> >>> reaches userspace. Do you have traces or more info about what is wrong ?
> >>
> >> Console output is just the same but it stops after the following line:
> >> [ 0.003208] Console: colour dummy device 80x25
> >>
> >> I did some very simplistic debugging bisecting start_kernel()
> >> execution and I could see that setup_per_cpu_pageset() was reached
> >> while calibrate_delay() was not.
> >>
> >> How (and whether) this might be related to XIP I don't know :)
> >
> > A short update: the system would hang in sched_clock_init() if run
> > with 'go 21000000' command.
>
> The output I pasted came from a boot using 'go', I can't make 'booti'
> work in my setup.
>
> And you don't have this issue with your patch right ?
I don't have it with yours as well. :) However, there's a small change
in u-boot's arch/riscv/lib/image.c that I forgot about (but sent it
today, and you're on CC).
Basically u-boot needs to honor force_reloc flag and not *force* the
relocation when this flag is not set.
> Can you give me any config that could allow me to reproduce this
> (uboot/buildroot) ? And your qemu version ?
Other than the small change mentioned above, u-boot and qemu are
basically the latest git.
All in all, I am quite sure now that your take on XIP is working fine.
The issue with single-core boot under QEmu seems to be less
reproducible on slower machines running QEmu and more reproducible on
higher performance ones. It's not clear to me if that is a QEmu
problem or an in-kernel race, but it's hardly a XIP problem: I was
able to reproduce it once on a non-XIP kernel too, by copying it to
RAM in u-boot and giving it a 'go'.
> Thanks,
>
> > If I use 'booti' command it passes and goes further all the way to
> > mounting the userspace
> >
> > So the problem is rather SMP related than XIP related.
>
>
>
> >
> > Best regards,
> > Vitaly
> >
> >>> Thanks!
> >>>
> >>> [ 0.000000] Linux version 5.12.0-rc2 (alex@debian)
> >>> (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.11.2) 9.3.0,
> >>> GNU ld (GNU Binutils) 2.34) #322 SMP Sat Apr 3 05:50:18 EDT 2021
> >>> [ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit
> >>> [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
> >>> [ 0.000000] printk: bootconsole [sbi0] enabled
> >>> [ 0.000000] Zone ranges:
> >>> [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff]
> >>> [ 0.000000] Normal empty
> >>> [ 0.000000] Movable zone start for each node
> >>> [ 0.000000] Early memory node ranges
> >>> [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff]
> >>> [ 0.000000] Initmem setup node 0 [mem
> >>> 0x0000000080000000-0x00000000bfffffff]
> >>> [ 0.000000] On node 0 totalpages: 262144
> >>> [ 0.000000] DMA32 zone: 3584 pages used for memmap
> >>> [ 0.000000] DMA32 zone: 0 pages reserved
> >>> [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
> >>> [ 0.000000] SBI specification v0.2 detected
> >>> [ 0.000000] SBI implementation ID=0x1 Version=0x6
> >>> [ 0.000000] SBI v0.2 TIME extension detected
> >>> [ 0.000000] SBI v0.2 IPI extension detected
> >>> [ 0.000000] SBI v0.2 RFENCE extension detected
> >>> [ 0.000000] software IO TLB: mapped [mem
> >>> 0x00000000b9e00000-0x00000000bde00000] (64MB)
> >>> [ 0.000000] CPU with hartid=0 is not available
> >>> [ 0.000000] CPU with hartid=0 is not available
> >>> [ 0.000000] riscv: ISA extensions acdfim
> >>> [ 0.000000] riscv: ELF capabilities acdfim
> >>> [ 0.000000] percpu: Embedded 17 pages/cpu s29856 r8192 d31584 u69632
> >>> [ 0.000000] pcpu-alloc: s29856 r8192 d31584 u69632 alloc=17*4096
> >>> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> >>> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258560
> >>> [ 0.000000] Kernel command line: earlyprintk debug earlycon=sbi
> >>> console=ttyS0,115200n8 root=/dev/ram0 init=/sbin/init
> >>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 8,
> >>> 1048576 bytes, linear)
> >>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288
> >>> bytes, linear)
> >>> [ 0.000000] Sorting __ex_table...
> >>> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> >>> [ 0.000000] Memory: 947732K/1048576K available (2999K kernel code,
> >>> 692K rwdata, 953K rodata, 205K init, 247K bss, 100844K reserved, 0K
> >>> cma-reserved)
> >>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> >>> [ 0.000000] rcu: Hierarchical RCU implementation.
> >>> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
> >>> [ 0.000000] rcu: RCU debug extended QS entry/exit.
> >>> [ 0.000000] Tracing variant of Tasks RCU enabled.
> >>> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> >>> is 25 jiffies.
> >>> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> >>> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> >>> [ 0.000000] CPU with hartid=0 is not available
> >>> [ 0.000000] riscv-intc: unable to find hart id for
> >>> /cpus/cpu@0/interrupt-controller
> >>> [ 0.000000] riscv-intc: 64 local interrupts mapped
> >>> [ 0.000000] plic: interrupt-controller@c000000: mapped 186 interrupts
> >>> with 4 handlers for 9 contexts.
> >>> [ 0.000000] random: get_random_bytes called from
> >>> start_kernel+0x2fe/0x49c with crng_init=0
> >>> [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0]
> >>> hartid [1]
> >>> [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff
> >>> max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
> >>> [ 0.000146] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps
> >>> every 2199023255500ns
> >>> [ 0.006056] Console: colour dummy device 80x25
> >>> [ 0.015242] Calibrating delay loop (skipped), value calculated using
> >>> timer frequency.. 2.00 BogoMIPS (lpj=4000)
> >>> [ 0.017130] pid_max: default: 32768 minimum: 301
> >>> [ 0.020115] Mount-cache hash table entries: 2048 (order: 2, 16384
> >>> bytes, linear)
> >>> [ 0.021097] Mountpoint-cache hash table entries: 2048 (order: 2,
> >>> 16384 bytes, linear)
> >>> [ 0.078755] ASID allocator using 16 bits (65536 entries)
> >>> [ 0.083669] rcu: Hierarchical SRCU implementation.
> >>> [ 0.093304] smp: Bringing up secondary CPUs ...
> >>> [ 1.149900] CPU1: failed to come online
> >>> [ 2.204183] CPU2: failed to come online
> >>> [ 3.256211] CPU3: failed to come online
> >>> [ 3.257043] smp: Brought up 1 node, 1 CPU
> >>> [ 3.269554] devtmpfs: initialized
> >>> [ 3.282015] clocksource: jiffies: mask: 0xffffffff max_cycles:
> >>> 0xffffffff, max_idle_ns: 7645041785100000 ns
> >>> [ 3.283484] futex hash table entries: 1024 (order: 4, 65536 bytes,
> >>> linear)
> >>> [ 3.381718] SCSI subsystem initialized
> >>> [ 3.385115] clocksource: Switched to clocksource riscv_clocksource
> >>> [ 3.602198] workingset: timestamp_bits=62 max_order=18 bucket_order=0
> >>> [ 3.624182] Block layer SCSI generic (bsg) driver version 0.4 loaded
> >>> (major 253)
> >>> [ 3.625988] io scheduler mq-deadline registered
> >>> [ 3.626725] io scheduler kyber registered
> >>> [ 3.629047] start plist test
> >>> [ 3.641420] end plist test
> >>> [ 3.717639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> >>> [ 3.752315] brd: module loaded
> >>> [ 3.790207] loop: module loaded
> >>> [ 3.793943] mousedev: PS/2 mouse device common for all mice
> >>> [ 3.810511] Warning: unable to open an initial console.
> >>> [ 3.811923] Freeing unused kernel memory: 88K
> >>> [ 3.812558] This architecture does not have kernel memory protection.
> >>> [ 3.814280] Run /init as init process
> >>> [ 3.814808] with arguments:
> >>> [ 3.815227] /init
> >>> [ 3.815539] with environment:
> >>> [ 3.815924] HOME=/
> >>> [ 3.816250] TERM=linux
> >>> [ 4.398678] random: dd: uninitialized urandom read (512 bytes read)
> >>>
> >>>
> >>>> Thanks,
> >>>>
> >>>> Alex
> >>>>
> >>>>> I'll take a look at the code later today.
> >>>>>
> >>>>> Best regards,
> >>>>> Vitaly
> >>>>>
> >>>>>> Thanks,
> >>>>>>
> >>>>>> Alex
> >>>>>>
> >>>>>>>
> >>>>>>>> Either way, can you point me (either just indicate the old version is
> >>>>>>>> OK or send a new one) to what you want me to look at WRT the page
> >>>>>>>> table code? IIRC it looked pretty much fine, but I'll take another
> >>>>>>>> look ASAP so we can avoid serializing everything.
> >>>>>>>
> >>>>>>> The v3 is fine for me:
> >>>>>>> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
> >>>>>>>
> >>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Alex
> >>>>>>>>>
> >>>>>>>>>>>> pfn_base = PFN_DOWN(load_pa);
> >>>>>>>>>>>>
> >>>>>>>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>>>>> dtb_pa)
> >>>>>>>>>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
> >>>>>>>>>>>> PAGE_TABLE);
> >>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>>>>>>>> + va += PMD_SIZE) {
> >>>>>>>>>>>> + create_pmd_mapping(xip_pmd, va,
> >>>>>>>>>>>> + xiprom + (va -
> >>>>>>>>>>>> XIP_VIRT_ADDR_START),
> >>>>>>>>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
> >>>>>>>>>>>> + }
> >>>>>>>>>>>> +
> >>>>>>>>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> >>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
> >>>>>>>>>>>> PAGE_TABLE);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>> +
> >>>>>>>>>>>> /*
> >>>>>>>>>>>> * Setup early PGD covering entire kernel which will
> >>>>>>>>>>>> allows
> >>>>>>>>>>>> * us to reach paging_init(). We map all memory banks
> >>>>>>>>>>>> later
> >>>>>>>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>>>>> dtb_pa)
> >>>>>>>>>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
> >>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>>>>>>>> (PMD_SIZE - 1));
> >>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>>>>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>>>>>>>> #else
> >>>>>>>>>>>> #ifndef CONFIG_BUILTIN_DTB
> >>>>>>>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t
> >>>>>>>>>>>> dtb_pa)
> >>>>>>>>>>>> pa + PGDIR_SIZE, PGDIR_SIZE,
> >>>>>>>>>>>> PAGE_KERNEL);
> >>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
> >>>>>>>>>>>> (PGDIR_SIZE - 1));
> >>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
> >>>>>>>>>>>> - dtb_early_va = __va(dtb_pa);
> >>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
> >>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
> >>>>>>>>>>>> #endif
> >>>>>>>>>>>> dtb_early_pa = dtb_pa;
> >>>>>>>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
> >>>>>>>>>>>> uintptr_t va, map_size;
> >>>>>>>>>>>> phys_addr_t pa, start, end;
> >>>>>>>>>>>> u64 i;
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
> >>>>>>>>>>>> (uintptr_t)(&_xiprom);
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> /**
> >>>>>>>>>>>> * MMU is enabled at this point. But page table setup is
> >>>>>>>>>>>> not complete yet.
> >>>>>>>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
> >>>>>>>>>>>> map_size,
> >>>>>>>>>>>> PAGE_KERNEL_EXEC);
> >>>>>>>>>>>> }
> >>>>>>>>>>>> }
> >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
> >>>>>>>>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
> >>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
> >>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> >>>>>>>>>>>> + va += map_size)
> >>>>>>>>>>>> + create_pgd_mapping(swapper_pg_dir, va,
> >>>>>>>>>>>> + CONFIG_XIP_PHYS_ADDR + (va -
> >>>>>>>>>>>> XIP_VIRT_ADDR_START),
> >>>>>>>>>>>> + map_size, PAGE_KERNEL_EXEC);
> >>>>>>>>>>>> +
> >>>>>>>>>>>> +#endif
> >>>>>>>>>>>>
> >>>>>>>>>>>> /* Clear fixmap PTE and PMD mappings */
> >>>>>>>>>>>> clear_fixmap(FIX_PTE);
> >>>>>>>>>>
> >>>>>>>>>> _______________________________________________
> >>>>>>>>>> linux-riscv mailing list
> >>>>>>>>>> [email protected]
> >>>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>>>>>>>
> >>>>>>>>
> >>>>>>>> _______________________________________________
> >>>>>>>> linux-riscv mailing list
> >>>>>>>> [email protected]
> >>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> linux-riscv mailing list
> >>>>>>> [email protected]
> >>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>>
> >>>>> _______________________________________________
> >>>>> linux-riscv mailing list
> >>>>> [email protected]
> >>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
> >>>>>
> >
> > _______________________________________________
> > linux-riscv mailing list
> > [email protected]
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
> >
Hi Vitaly,
Le 4/5/21 à 4:34 AM, Vitaly Wool a écrit :
> On Sun, Apr 4, 2021 at 10:39 AM Vitaly Wool <[email protected]> wrote:
>>
>> On Sat, Apr 3, 2021 at 12:00 PM Alex Ghiti <[email protected]> wrote:
>>>
>>> Hi Vitaly,
>>>
>>> Le 4/1/21 à 7:10 AM, Alex Ghiti a écrit :
>>>> Le 4/1/21 à 4:52 AM, Vitaly Wool a écrit :
>>>>> Hi Alex,
>>>>>
>>>>> On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <[email protected]> wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
>>>>>>> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
>>>>>>>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
>>>>>>>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
>>>>>>>>>> <[email protected]> wrote:
>>>>>>>>>>>
>>>>>>>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
>>>>>>>>>>> wrote:
>>>>>>>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
>>>>>>>>>>>> It allows code to be executed directly from non-volatile storage
>>>>>>>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
>>>>>>>>>>>> be found on many RISC-V platforms. This makes way for significant
>>>>>>>>>>>> optimization of RAM footprint. The XIP kernel is not compressed
>>>>>>>>>>>> since it has to run directly from flash, so it will occupy more
>>>>>>>>>>>> space on the non-volatile storage. The physical flash address used
>>>>>>>>>>>> to link the kernel object files and for storing it has to be known
>>>>>>>>>>>> at compile time and is represented by a Kconfig option.
>>>>>>>>>>>>
>>>>>>>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
>>>>>>>>>>>> kernels.
>>>>>>>>>>>>
>>>>>>>>>>>> Signed-off-by: Vitaly Wool <[email protected]>
>>>>>>>>>>>>
>>>>>>>>>>>> ---
>>>>>>>>>>>>
>>>>>>>>>>>> Changes in v2:
>>>>>>>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled
>>>>>>>>>>>> yet
>>>>>>>>>>>> o both for 32-bit and 64-bit RISC-V
>>>>>>>>>>>> - SP is explicitly set to a safe place in RAM before
>>>>>>>>>>>> __copy_data call
>>>>>>>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
>>>>>>>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>>>>>>>>>>>> Changes in v3:
>>>>>>>>>>>> - rebased against latest for-next
>>>>>>>>>>>> - XIP address fixup macro now takes an argument
>>>>>>>>>>>> - SMP related fixes
>>>>>>>>>>>> Changes in v4:
>>>>>>>>>>>> - rebased against the current for-next
>>>>>>>>>>>> - less #ifdef's in C/ASM code
>>>>>>>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
>>>>>>>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
>>>>>>>>>>>> - Fixed multi-core boot
>>>>>>>>>>>> Changes in v5:
>>>>>>>>>>>> - fixed build error for non-XIP kernels
>>>>>>>>>>>> Changes in v6:
>>>>>>>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
>>>>>>>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
>>>>>>>>>>>> PHYS_RAM_BASE in non-XIP configurations if needed
>>>>>>>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid
>>>>>>>>>>>> side
>>>>>>>>>>>> effects
>>>>>>>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
>>>>>>>>>>>
>>>>>>>>>>> So v5 landed on for-next, which generally means it's best to avoid
>>>>>>>>>>> re-spinning the patch and instead send along fixups. That said,
>>>>>>>>>>> the v5
>>>>>>>>>>> is causing some testing failures for me.
>>>>>>>>>>>
>>>>>>>>>>> I'm going to drop the v5 for now as I don't have time to test this
>>>>>>>>>>> tonight. I'll try and take a look soon, as it will conflict with
>>>>>>>>>>> Alex's
>>>>>>>>>>> patches.
>>>>>>>>>>
>>>>>>>>>> I can come up with the incremental patch instead pretty much
>>>>>>>>>> straight
>>>>>>>>>> away if that works better.
>>>>>>>>>>
>>>>>>>>>> ~Vitaly
>>>>>>>>>>
>>>>>>>>>>>> arch/riscv/Kconfig | 49 ++++++++++-
>>>>>>>>>>>> arch/riscv/Makefile | 8 +-
>>>>>>>>>>>> arch/riscv/boot/Makefile | 13 +++
>>>>>>>>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
>>>>>>>>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
>>>>>>>>>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
>>>>>>>>>>>> arch/riscv/kernel/head.h | 3 +
>>>>>>>>>>>> arch/riscv/kernel/setup.c | 8 +-
>>>>>>>>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132
>>>>>>>>>>>> ++++++++++++++++++++++++++++
>>>>>>>>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
>>>>>>>>>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
>>>>>>>>>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
>>>>>>>>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>>>>>
>>>>>>>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>>>>>>>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
>>>>>>>>>>>> --- a/arch/riscv/Kconfig
>>>>>>>>>>>> +++ b/arch/riscv/Kconfig
>>>>>>>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
>>>>>>>>>>>>
>>>>>>>>>>>> config EFI
>>>>>>>>>>>> bool "UEFI runtime support"
>>>>>>>>>>>> - depends on OF
>>>>>>>>>>>> + depends on OF && !XIP_KERNEL
>>>>>>>>>>>> select LIBFDT
>>>>>>>>>>>> select UCS2_STRING
>>>>>>>>>>>> select EFI_PARAMS_FROM_FDT
>>>>>>>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
>>>>>>>>>>>> def_bool y
>>>>>>>>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>>>>>>>>>>>>
>>>>>>>>>>>> +config PHYS_RAM_BASE_FIXED
>>>>>>>>>>>> + bool "Explicitly specified physical RAM address"
>>>>>>>>>>>> + default n
>>>>>>>>>>>> +
>>>>>>>>>>>> +config PHYS_RAM_BASE
>>>>>>>>>>>> + hex "Platform Physical RAM address"
>>>>>>>>>>>> + depends on PHYS_RAM_BASE_FIXED
>>>>>>>>>>>> + default "0x80000000"
>>>>>>>>>>>> + help
>>>>>>>>>>>> + This is the physical address of RAM in the system. It has
>>>>>>>>>>>> to be
>>>>>>>>>>>> + explicitly specified to run early relocations of
>>>>>>>>>>>> read-write data
>>>>>>>>>>>> + from flash to RAM.
>>>>>>>>>>>> +
>>>>>>>>>>>> +config XIP_KERNEL
>>>>>>>>>>>> + bool "Kernel Execute-In-Place from ROM"
>>>>>>>>>>>> + depends on MMU
>>>>>>>>>>>> + select PHYS_RAM_BASE_FIXED
>>>>>>>>>>>> + help
>>>>>>>>>>>> + Execute-In-Place allows the kernel to run from
>>>>>>>>>>>> non-volatile storage
>>>>>>>>>>>> + directly addressable by the CPU, such as NOR flash. This
>>>>>>>>>>>> saves RAM
>>>>>>>>>>>> + space since the text section of the kernel is not loaded
>>>>>>>>>>>> from flash
>>>>>>>>>>>> + to RAM. Read-write sections, such as the data section and
>>>>>>>>>>>> stack,
>>>>>>>>>>>> + are still copied to RAM. The XIP kernel is not compressed
>>>>>>>>>>>> since
>>>>>>>>>>>> + it has to run directly from flash, so it will take more
>>>>>>>>>>>> space to
>>>>>>>>>>>> + store it. The flash address used to link the kernel
>>>>>>>>>>>> object files,
>>>>>>>>>>>> + and for storing it, is configuration dependent. Therefore,
>>>>>>>>>>>> if you
>>>>>>>>>>>> + say Y here, you must know the proper physical address
>>>>>>>>>>>> where to
>>>>>>>>>>>> + store the kernel image depending on your own flash memory
>>>>>>>>>>>> usage.
>>>>>>>>>>>> +
>>>>>>>>>>>> + Also note that the make target becomes "make xipImage"
>>>>>>>>>>>> rather than
>>>>>>>>>>>> + "make zImage" or "make Image". The final kernel binary to
>>>>>>>>>>>> put in
>>>>>>>>>>>> + ROM memory will be arch/riscv/boot/xipImage.
>>>>>>>>>>>> +
>>>>>>>>>>>> + If unsure, say N.
>>>>>>>>>>>> +
>>>>>>>>>>>> +config XIP_PHYS_ADDR
>>>>>>>>>>>> + hex "XIP Kernel Physical Location"
>>>>>>>>>>>> + depends on XIP_KERNEL
>>>>>>>>>>>> + default "0x21000000"
>>>>>>>>>>>> + help
>>>>>>>>>>>> + This is the physical address in your flash memory the
>>>>>>>>>>>> kernel will
>>>>>>>>>>>> + be linked for and stored to. This address is dependent on
>>>>>>>>>>>> your
>>>>>>>>>>>> + own flash usage.
>>>>>>>>>>>> +
>>>>>>>>>>>> endmenu
>>>>>>>>>>>>
>>>>>>>>>>>> config BUILTIN_DTB
>>>>>>>>>>>> - def_bool n
>>>>>>>>>>>> + bool
>>>>>>>>>>>> depends on OF
>>>>>>>>>>>> + default y if XIP_KERNEL
>>>>>>>>>>>>
>>>>>>>>>>>> menu "Power management options"
>>>>>>>>>>>>
>>>>>>>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
>>>>>>>>>>>> index 1368d943f1f3..8fcbec03974d 100644
>>>>>>>>>>>> --- a/arch/riscv/Makefile
>>>>>>>>>>>> +++ b/arch/riscv/Makefile
>>>>>>>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>>>>>>>>>>>>
>>>>>>>>>>>> # Default target when executing plain make
>>>>>>>>>>>> boot := arch/riscv/boot
>>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>>>>>> +KBUILD_IMAGE := $(boot)/xipImage
>>>>>>>>>>>> +else
>>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
>>>>>>>>>>>> +endif
>>>>>>>>>>>>
>>>>>>>>>>>> head-y := arch/riscv/kernel/head.o
>>>>>>>>>>>>
>>>>>>>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
>>>>>>>>>>>> vdso_install:
>>>>>>>>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>>>>>>>>>>>>
>>>>>>>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
>>>>>>>>>>>> KBUILD_IMAGE := $(boot)/loader.bin
>>>>>>>>>>>> else
>>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
>>>>>>>>>>>> endif
>>>>>>>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
>>>>>>>>>>>> +endif
>>>>>>>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>>>>>>>>>>>>
>>>>>>>>>>>> all: $(notdir $(KBUILD_IMAGE))
>>>>>>>>>>>>
>>>>>>>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
>>>>>>>>>>>> index 03404c84f971..6bf299f70c27 100644
>>>>>>>>>>>> --- a/arch/riscv/boot/Makefile
>>>>>>>>>>>> +++ b/arch/riscv/boot/Makefile
>>>>>>>>>>>> @@ -17,8 +17,21 @@
>>>>>>>>>>>> KCOV_INSTRUMENT := n
>>>>>>>>>>>>
>>>>>>>>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R
>>>>>>>>>>>> .note.gnu.build-id -R
>>>>>>>>>>>> .comment -S
>>>>>>>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
>>>>>>>>>>>> -R .comment -S
>>>>>>>>>>>>
>>>>>>>>>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>>>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>>>>>>>> xipImage
>>>>>>>>>>>> +
>>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>>>>>> +
>>>>>>>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
>>>>>>>>>>>> +cmd_mkxip = $(cmd_objcopy)
>>>>>>>>>>>> +
>>>>>>>>>>>> +$(obj)/xipImage: vmlinux FORCE
>>>>>>>>>>>> + $(call if_changed,mkxip)
>>>>>>>>>>>> + @$(kecho) ' Physical Address of xipImage:
>>>>>>>>>>>> $(CONFIG_XIP_PHYS_ADDR)'
>>>>>>>>>>>> +
>>>>>>>>>>>> +endif
>>>>>>>>>>>>
>>>>>>>>>>>> $(obj)/Image: vmlinux FORCE
>>>>>>>>>>>> $(call if_changed,objcopy)
>>>>>>>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
>>>>>>>>>>>> b/arch/riscv/include/asm/pgtable.h
>>>>>>>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
>>>>>>>>>>>> --- a/arch/riscv/include/asm/pgtable.h
>>>>>>>>>>>> +++ b/arch/riscv/include/asm/pgtable.h
>>>>>>>>>>>> @@ -11,6 +11,33 @@
>>>>>>>>>>>>
>>>>>>>>>>>> #include <asm/pgtable-bits.h>
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_MMU
>>>>>>>>>>>> +
>>>>>>>>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>>>>>>>> +
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
>>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
>>>>>>>>>>>> +
>>>>>>>>>>>> +#define XIP_OFFSET SZ_8M
>>>>>>>>>>>> +#define XIP_MASK (SZ_8M - 1)
>>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) \
>>>>>>>>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
>>>>>>>>>>>> +
>>>>>>>>>>>> +#else
>>>>>>>>>>>> +
>>>>>>>>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
>>>>>>>>>>>> +
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>> +
>>>>>>>>>>>> +#else
>>>>>>>>>>>> +
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>> +#endif /* CONFIG_MMU */
>>>>>>>>>>>> +
>>>>>>>>>>>> #ifndef __ASSEMBLY__
>>>>>>>>>>>>
>>>>>>>>>>>> /* Page Upper Directory not used in RISC-V */
>>>>>>>>>>>> @@ -21,9 +48,25 @@
>>>>>>>>>>>>
>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>>
>>>>>>>>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>>>>>>>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
>>>>>>>>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +/*
>>>>>>>>>>>> + * Since we use sections to map it, this macro replaces the
>>>>>>>>>>>> physical address
>>>>>>>>>>>> + * with its virtual address while keeping offset from the base
>>>>>>>>>>>> section.
>>>>>>>>>>>> + */
>>>>>>>>>>>> +#define XIP_PHYS_ADDR(va) \
>>>>>>>>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
>>>>>>>>>>>> CONFIG_XIP_PHYS_ADDR)
>>>>>>>>>>>> +
>>>>>>>>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>>>>>> +
>>>>>>>>>>>> +#define XIP_FIXUP(addr) ({ \
>>>>>>>>>>>> + uintptr_t __a = (uintptr_t)(addr); \
>>>>>>>>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
>>>>>>>>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
>>>>>>>>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
>>>>>>>>>>>> XIP_OFFSET : __a; \
>>>>>>>>>>>> +})
>>>>>>>>>>>> +#else
>>>>>>>>>>>> +#define XIP_FIXUP(addr) (addr)
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>
>>>>>>>>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
>>>>>>>>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET -
>>>>>>>>>>>> BPF_JIT_REGION_SIZE)
>>>>>>>>>>>> @@ -484,8 +527,20 @@ static inline int
>>>>>>>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
>>>>>>>>>>>>
>>>>>>>>>>>> #define kern_addr_valid(addr) (1) /* FIXME */
>>>>>>>>>>>>
>>>>>>>>>>>> -extern void *dtb_early_va;
>>>>>>>>>>>> -extern uintptr_t dtb_early_pa;
>>>>>>>>>>>> +extern void *_dtb_early_va;
>>>>>>>>>>>> +extern uintptr_t _dtb_early_pa;
>>>>>>>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
>>>>>>>>>>>> +
>>>>>>>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
>>>>>>>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
>>>>>>>>>>>> +
>>>>>>>>>>>> +#else
>>>>>>>>>>>> +
>>>>>>>>>>>> +#define dtb_early_va _dtb_early_va
>>>>>>>>>>>> +#define dtb_early_pa _dtb_early_pa
>>>>>>>>>>>> +
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>> +
>>>>>>>>>>>> void setup_bootmem(void);
>>>>>>>>>>>> void paging_init(void);
>>>>>>>>>>>> void misc_mem_init(void);
>>>>>>>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>>>>> index 685fae72b7f5..2413c2997350 100644
>>>>>>>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
>>>>>>>>>>>> long hartid)
>>>>>>>>>>>> }
>>>>>>>>>>>> #endif
>>>>>>>>>>>>
>>>>>>>>>>>> +static inline unsigned long get_secondary_start_phys(void)
>>>>>>>>>>>> +{
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
>>>>>>>>>>>> +#else
>>>>>>>>>>>> + return __pa_symbol(secondary_start_sbi);
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> +}
>>>>>>>>>>>> +
>>>>>>>>>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct
>>>>>>>>>>>> *tidle)
>>>>>>>>>>>> {
>>>>>>>>>>>> int rc;
>>>>>>>>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
>>>>>>>>>>>> + unsigned long boot_addr = get_secondary_start_phys();
>>>>>>>>>>>> int hartid = cpuid_to_hartid_map(cpuid);
>>>>>>>>>>>>
>>>>>>>>>>>> cpu_update_secondary_bootdata(cpuid, tidle);
>>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>>>>>>>>>>>> index f5a9bad86e58..bbe74e37914f 100644
>>>>>>>>>>>> --- a/arch/riscv/kernel/head.S
>>>>>>>>>>>> +++ b/arch/riscv/kernel/head.S
>>>>>>>>>>>> @@ -9,11 +9,23 @@
>>>>>>>>>>>> #include <linux/linkage.h>
>>>>>>>>>>>> #include <asm/thread_info.h>
>>>>>>>>>>>> #include <asm/page.h>
>>>>>>>>>>>> +#include <asm/pgtable.h>
>>>>>>>>>>>> #include <asm/csr.h>
>>>>>>>>>>>> #include <asm/hwcap.h>
>>>>>>>>>>>> #include <asm/image.h>
>>>>>>>>>>>> #include "efi-header.S"
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>>>>>>>> + REG_L t0, _xip_fixup
>>>>>>>>>>>> + add \reg, \reg, t0
>>>>>>>>>>>> +.endm
>>>>>>>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
>>>>>>>>>>>> XIP_OFFSET
>>>>>>>>>>>> +#else
>>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>>>>>>>> +.endm
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>> +
>>>>>>>>>>>> __HEAD
>>>>>>>>>>>> ENTRY(_start)
>>>>>>>>>>>> /*
>>>>>>>>>>>> @@ -69,7 +81,11 @@ pe_head_start:
>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>> relocate:
>>>>>>>>>>>> /* Relocate return address */
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>>>>>> +#else
>>>>>>>>>>>> li a1, PAGE_OFFSET
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> la a2, _start
>>>>>>>>>>>> sub a1, a1, a2
>>>>>>>>>>>> add ra, ra, a1
>>>>>>>>>>>> @@ -91,6 +107,7 @@ relocate:
>>>>>>>>>>>> * to ensure the new translations are in use.
>>>>>>>>>>>> */
>>>>>>>>>>>> la a0, trampoline_pg_dir
>>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
>>>>>>>>>>>> srl a0, a0, PAGE_SHIFT
>>>>>>>>>>>> or a0, a0, a1
>>>>>>>>>>>> sfence.vma
>>>>>>>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
>>>>>>>>>>>>
>>>>>>>>>>>> slli a3, a0, LGREG
>>>>>>>>>>>> la a4, __cpu_up_stack_pointer
>>>>>>>>>>>> + XIP_FIXUP_OFFSET a4
>>>>>>>>>>>> la a5, __cpu_up_task_pointer
>>>>>>>>>>>> + XIP_FIXUP_OFFSET a5
>>>>>>>>>>>> add a4, a3, a4
>>>>>>>>>>>> add a5, a3, a5
>>>>>>>>>>>> REG_L sp, (a4)
>>>>>>>>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>> /* Enable virtual memory and relocate to virtual
>>>>>>>>>>>> address */
>>>>>>>>>>>> la a0, swapper_pg_dir
>>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
>>>>>>>>>>>> call relocate
>>>>>>>>>>>> #endif
>>>>>>>>>>>> call setup_trap_vector
>>>>>>>>>>>> @@ -236,12 +256,33 @@ pmp_done:
>>>>>>>>>>>> .Lgood_cores:
>>>>>>>>>>>> #endif
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>>>>>>>> /* Pick one hart to run the main boot sequence */
>>>>>>>>>>>> la a3, hart_lottery
>>>>>>>>>>>> li a2, 1
>>>>>>>>>>>> amoadd.w a3, a2, (a3)
>>>>>>>>>>>> bnez a3, .Lsecondary_start
>>>>>>>>>>>>
>>>>>>>>>>>> +#else
>>>>>>>>>>>> + /* hart_lottery in flash contains a magic number */
>>>>>>>>>>>> + la a3, hart_lottery
>>>>>>>>>>>> + mv a2, a3
>>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
>>>>>>>>>>>> + lw t1, (a3)
>>>>>>>>>>>> + amoswap.w t0, t1, (a2)
>>>>>>>>>>>> + /* first time here if hart_lottery in RAM is not set */
>>>>>>>>>>>> + beq t0, t1, .Lsecondary_start
>>>>>>>>>>>> +
>>>>>>>>>>>> + la sp, _end + THREAD_SIZE
>>>>>>>>>>>> + XIP_FIXUP_OFFSET sp
>>>>>>>>>>>> + mv s0, a0
>>>>>>>>>>>> + call __copy_data
>>>>>>>>>>>> +
>>>>>>>>>>>> + /* Restore a0 copy */
>>>>>>>>>>>> + mv a0, s0
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> +
>>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>>>>>>>> /* Clear BSS for flat non-ELF images */
>>>>>>>>>>>> la a3, __bss_start
>>>>>>>>>>>> la a4, __bss_stop
>>>>>>>>>>>> @@ -251,15 +292,18 @@ clear_bss:
>>>>>>>>>>>> add a3, a3, RISCV_SZPTR
>>>>>>>>>>>> blt a3, a4, clear_bss
>>>>>>>>>>>> clear_bss_done:
>>>>>>>>>>>> -
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> /* Save hart ID and DTB physical address */
>>>>>>>>>>>> mv s0, a0
>>>>>>>>>>>> mv s1, a1
>>>>>>>>>>>> +
>>>>>>>>>>>> la a2, boot_cpu_hartid
>>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
>>>>>>>>>>>> REG_S a0, (a2)
>>>>>>>>>>>>
>>>>>>>>>>>> /* Initialize page tables and relocate to virtual
>>>>>>>>>>>> addresses */
>>>>>>>>>>>> la sp, init_thread_union + THREAD_SIZE
>>>>>>>>>>>> + XIP_FIXUP_OFFSET sp
>>>>>>>>>>>> #ifdef CONFIG_BUILTIN_DTB
>>>>>>>>>>>> la a0, __dtb_start
>>>>>>>>>>>> #else
>>>>>>>>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
>>>>>>>>>>>> call setup_vm
>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>> la a0, early_pg_dir
>>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
>>>>>>>>>>>> call relocate
>>>>>>>>>>>> #endif /* CONFIG_MMU */
>>>>>>>>>>>>
>>>>>>>>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
>>>>>>>>>>>>
>>>>>>>>>>>> slli a3, a0, LGREG
>>>>>>>>>>>> la a1, __cpu_up_stack_pointer
>>>>>>>>>>>> + XIP_FIXUP_OFFSET a1
>>>>>>>>>>>> la a2, __cpu_up_task_pointer
>>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
>>>>>>>>>>>> add a1, a3, a1
>>>>>>>>>>>> add a2, a3, a2
>>>>>>>>>>>>
>>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
>>>>>>>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
>>>>>>>>>>>> --- a/arch/riscv/kernel/head.h
>>>>>>>>>>>> +++ b/arch/riscv/kernel/head.h
>>>>>>>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>>>>>>>>>>>>
>>>>>>>>>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
>>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +asmlinkage void __init __copy_data(void);
>>>>>>>>>>>> +#endif
>>>>>>>>>>>>
>>>>>>>>>>>> extern void *__cpu_up_stack_pointer[];
>>>>>>>>>>>> extern void *__cpu_up_task_pointer[];
>>>>>>>>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>>>>>>>>>>>> index e85bacff1b50..a0384c72c272 100644
>>>>>>>>>>>> --- a/arch/riscv/kernel/setup.c
>>>>>>>>>>>> +++ b/arch/riscv/kernel/setup.c
>>>>>>>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
>>>>>>>>>>>> __section(".data") = {
>>>>>>>>>>>> * This is used before the kernel initializes the BSS so it
>>>>>>>>>>>> can't be in the
>>>>>>>>>>>> * BSS.
>>>>>>>>>>>> */
>>>>>>>>>>>> -atomic_t hart_lottery __section(".sdata");
>>>>>>>>>>>> +atomic_t hart_lottery __section(".sdata")
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> += ATOMIC_INIT(0xC001BEEF)
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> +;
>>>>>>>>>>>> unsigned long boot_cpu_hartid;
>>>>>>>>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
>>>>>>>>>>>>
>>>>>>>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
>>>>>>>>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
>>>>>>>>>>>> unflatten_and_copy_device_tree();
>>>>>>>>>>>> #else
>>>>>>>>>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
>>>>>>>>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
>>>>>>>>>>>> unflatten_device_tree();
>>>>>>>>>>>> else
>>>>>>>>>>>> pr_err("No DTB found in kernel mappings\n");
>>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>>>>> new file mode 100644
>>>>>>>>>>>> index 000000000000..9f0f08c34cd3
>>>>>>>>>>>> --- /dev/null
>>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>>>>> @@ -0,0 +1,132 @@
>>>>>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>>>>>>>>>>> +/*
>>>>>>>>>>>> + * Copyright (C) 2012 Regents of the University of California
>>>>>>>>>>>> + * Copyright (C) 2017 SiFive
>>>>>>>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
>>>>>>>>>>>> + */
>>>>>>>>>>>> +
>>>>>>>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>>>>>> +/* No __ro_after_init data in the .rodata section - which will
>>>>>>>>>>>> always be ro */
>>>>>>>>>>>> +#define RO_AFTER_INIT_DATA
>>>>>>>>>>>> +
>>>>>>>>>>>> +#include <asm/vmlinux.lds.h>
>>>>>>>>>>>> +#include <asm/page.h>
>>>>>>>>>>>> +#include <asm/pgtable.h>
>>>>>>>>>>>> +#include <asm/cache.h>
>>>>>>>>>>>> +#include <asm/thread_info.h>
>>>>>>>>>>>> +
>>>>>>>>>>>> +OUTPUT_ARCH(riscv)
>>>>>>>>>>>> +ENTRY(_start)
>>>>>>>>>>>> +
>>>>>>>>>>>> +jiffies = jiffies_64;
>>>>>>>>>>>> +
>>>>>>>>>>>> +SECTIONS
>>>>>>>>>>>> +{
>>>>>>>>>>>> + /* Beginning of code and text segment */
>>>>>>>>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
>>>>>>>>>>>> + _xiprom = .;
>>>>>>>>>>>> + _start = .;
>>>>>>>>>>>> + HEAD_TEXT_SECTION
>>>>>>>>>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
>>>>>>>>>>>> + /* we have to discard exit text and such at runtime, not
>>>>>>>>>>>> link time */
>>>>>>>>>>>> + .exit.text :
>>>>>>>>>>>> + {
>>>>>>>>>>>> + EXIT_TEXT
>>>>>>>>>>>> + }
>>>>>>>>>>>> +
>>>>>>>>>>>> + .text : {
>>>>>>>>>>>> + _text = .;
>>>>>>>>>>>> + _stext = .;
>>>>>>>>>>>> + TEXT_TEXT
>>>>>>>>>>>> + SCHED_TEXT
>>>>>>>>>>>> + CPUIDLE_TEXT
>>>>>>>>>>>> + LOCK_TEXT
>>>>>>>>>>>> + KPROBES_TEXT
>>>>>>>>>>>> + ENTRY_TEXT
>>>>>>>>>>>> + IRQENTRY_TEXT
>>>>>>>>>>>> + SOFTIRQENTRY_TEXT
>>>>>>>>>>>> + *(.fixup)
>>>>>>>>>>>> + _etext = .;
>>>>>>>>>>>> + }
>>>>>>>>>>>> + RO_DATA(L1_CACHE_BYTES)
>>>>>>>>>>>> + .srodata : {
>>>>>>>>>>>> + *(.srodata*)
>>>>>>>>>>>> + }
>>>>>>>>>>>> + .init.rodata : {
>>>>>>>>>>>> + INIT_SETUP(16)
>>>>>>>>>>>> + INIT_CALLS
>>>>>>>>>>>> + CON_INITCALL
>>>>>>>>>>>> + INIT_RAM_FS
>>>>>>>>>>>> + }
>>>>>>>>>>>> + _exiprom = .; /* End of XIP ROM area */
>>>>>>>>>>>> +
>>>>>>>>>>>> +
>>>>>>>>>>>> +/*
>>>>>>>>>>>> + * From this point, stuff is considered writable and will be
>>>>>>>>>>>> copied to RAM
>>>>>>>>>>>> + */
>>>>>>>>>>>> + __data_loc = ALIGN(16); /* location in file */
>>>>>>>>>>>> + . = PAGE_OFFSET; /* location in memory */
>>>>>>>>>>>> +
>>>>>>>>>>>> + _sdata = .; /* Start of data section */
>>>>>>>>>>>> + _data = .;
>>>>>>>>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
>>>>>>>>>>>> + _edata = .;
>>>>>>>>>>>> + __start_ro_after_init = .;
>>>>>>>>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
>>>>>>>>>>>> LOAD_OFFSET) {
>>>>>>>>>>>> + *(.data..ro_after_init)
>>>>>>>>>>>> + }
>>>>>>>>>>>> + __end_ro_after_init = .;
>>>>>>>>>>>> +
>>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
>>>>>>>>>>>> + __init_begin = .;
>>>>>>>>>>>> + .init.data : {
>>>>>>>>>>>> + INIT_DATA
>>>>>>>>>>>> + }
>>>>>>>>>>>> + .exit.data : {
>>>>>>>>>>>> + EXIT_DATA
>>>>>>>>>>>> + }
>>>>>>>>>>>> + . = ALIGN(8);
>>>>>>>>>>>> + __soc_early_init_table : {
>>>>>>>>>>>> + __soc_early_init_table_start = .;
>>>>>>>>>>>> + KEEP(*(__soc_early_init_table))
>>>>>>>>>>>> + __soc_early_init_table_end = .;
>>>>>>>>>>>> + }
>>>>>>>>>>>> + __soc_builtin_dtb_table : {
>>>>>>>>>>>> + __soc_builtin_dtb_table_start = .;
>>>>>>>>>>>> + KEEP(*(__soc_builtin_dtb_table))
>>>>>>>>>>>> + __soc_builtin_dtb_table_end = .;
>>>>>>>>>>>> + }
>>>>>>>>>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
>>>>>>>>>>>> +
>>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
>>>>>>>>>>>> + __init_end = .;
>>>>>>>>>>>> +
>>>>>>>>>>>> + .sdata : {
>>>>>>>>>>>> + __global_pointer$ = . + 0x800;
>>>>>>>>>>>> + *(.sdata*)
>>>>>>>>>>>> + *(.sbss*)
>>>>>>>>>>>> + }
>>>>>>>>>>>> +
>>>>>>>>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>>>>>>>>>>>> + EXCEPTION_TABLE(0x10)
>>>>>>>>>>>> +
>>>>>>>>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
>>>>>>>>>>>> + *(.rel.dyn*)
>>>>>>>>>>>> + }
>>>>>>>>>>>> +
>>>>>>>>>>>> + /*
>>>>>>>>>>>> + * End of copied data. We need a dummy section to get its
>>>>>>>>>>>> LMA.
>>>>>>>>>>>> + * Also located before final ALIGN() as trailing padding is
>>>>>>>>>>>> not stored
>>>>>>>>>>>> + * in the resulting binary file and useless to copy.
>>>>>>>>>>>> + */
>>>>>>>>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
>>>>>>>>>>>> + _edata_loc = LOADADDR(.data.endmark);
>>>>>>>>>>>> +
>>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
>>>>>>>>>>>> + _end = .;
>>>>>>>>>>>> +
>>>>>>>>>>>> + STABS_DEBUG
>>>>>>>>>>>> + DWARF_DEBUG
>>>>>>>>>>>> +
>>>>>>>>>>>> + DISCARDS
>>>>>>>>>>>> +}
>>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>>>>> b/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>>>>> index de03cb22d0e9..6745ec325930 100644
>>>>>>>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>>>>> @@ -4,7 +4,12 @@
>>>>>>>>>>>> * Copyright (C) 2017 SiFive
>>>>>>>>>>>> */
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +#include "vmlinux-xip.lds.S"
>>>>>>>>>>>> +#else
>>>>>>>>>>>> +
>>>>>>>>>>>> #define LOAD_OFFSET PAGE_OFFSET
>>>>>>>>>>>> +
>>>>>>>>>>>> #include <asm/vmlinux.lds.h>
>>>>>>>>>>>> #include <asm/page.h>
>>>>>>>>>>>> #include <asm/cache.h>
>>>>>>>>>>>> @@ -132,3 +137,4 @@ SECTIONS
>>>>>>>>>>>>
>>>>>>>>>>>> DISCARDS
>>>>>>>>>>>> }
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
>>>>>>>>>>>> index 7f5036fbee8c..efe649d41f95 100644
>>>>>>>>>>>> --- a/arch/riscv/mm/init.c
>>>>>>>>>>>> +++ b/arch/riscv/mm/init.c
>>>>>>>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>>>>>>>>>>>>
>>>>>>>>>>>> extern char _start[];
>>>>>>>>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
>>>>>>>>>>>> -void *dtb_early_va __initdata;
>>>>>>>>>>>> -uintptr_t dtb_early_pa __initdata;
>>>>>>>>>>>> +void *_dtb_early_va __initdata;
>>>>>>>>>>>> +uintptr_t _dtb_early_pa __initdata;
>>>>>>>>>>>>
>>>>>>>>>>>> struct pt_alloc_ops {
>>>>>>>>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
>>>>>>>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
>>>>>>>>>>>> (unsigned long)VMALLOC_END);
>>>>>>>>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
>>>>>>>>>>>> (unsigned long)high_memory);
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
>>>>>>>>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>> }
>>>>>>>>>>>> #else
>>>>>>>>>>>> static void print_vm_layout(void) { }
>>>>>>>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
>>>>>>>>>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
>>>>>>>>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> + vmlinux_start = __pa_symbol(&_sdata);
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> +
>>>>>>>>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
>>>>>>>>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
>>>>>>>>>>>>
>>>>>>>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
>>>>>>>>>>>> memblock_allow_resize();
>>>>>>>>>>>> }
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +
>>>>>>>>>>>> +extern char _xiprom[], _exiprom[];
>>>>>>>>>>>> +extern char _sdata[], _edata[];
>>>>>>>>>>>> +
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>> +
>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>> -static struct pt_alloc_ops pt_ops;
>>>>>>>>>>>> +static struct pt_alloc_ops _pt_ops;
>>>>>>>>>>>> +
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
>>>>>>>>>>>> +#else
>>>>>>>>>>>> +#define pt_ops _pt_ops
>>>>>>>>>>>> +#endif
>>>>>>>>>>>>
>>>>>>>>>>>> unsigned long va_pa_offset;
>>>>>>>>>>>> EXPORT_SYMBOL(va_pa_offset);
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +#define va_pa_offset (*((unsigned long
>>>>>>>>>>>> *)XIP_FIXUP(&va_pa_offset)))
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> unsigned long pfn_base;
>>>>>>>>>>>> EXPORT_SYMBOL(pfn_base);
>>>>>>>>>>>>
>>>>>>>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
>>>>>>>>>>>> __page_aligned_bss;
>>>>>>>>>>>>
>>>>>>>>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata
>>>>>>>>>>>> __aligned(PAGE_SIZE);
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +#define trampoline_pg_dir ((pgd_t
>>>>>>>>>>>> *)XIP_FIXUP(trampoline_pg_dir))
>>>>>>>>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
>>>>>>>>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>> +
>>>>>>>>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
>>>>>>>>>>>> pgprot_t prot)
>>>>>>>>>>>> {
>>>>>>>>>>>> unsigned long addr = __fix_to_virt(idx);
>>>>>>>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
>>>>>>>>>>>> __page_aligned_bss;
>>>>>>>>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>>>>>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata
>>>>>>>>>>>> __aligned(PAGE_SIZE);
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>>>>>>>>>>> +
>>>>>>>>>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
>>>>>>>>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
>>>>>>>>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
>>>>>>>>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>> +
>>>>>>>>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
>>>>>>>>>>>> {
>>>>>>>>>>>> /* Before MMU is enabled */
>>>>>>>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
>>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>>>>>>>> return PMD_SIZE;
>>>>>>>>>>>> }
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> +/* called from head.S with MMU off */
>>>>>>>>>>>> +asmlinkage void __init __copy_data(void)
>>>>>>>>>>>> +{
>>>>>>>>>>>> + void *from = (void *)(&_sdata);
>>>>>>>>>>>> + void *end = (void *)(&_end);
>>>>>>>>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
>>>>>>>>>>>> + size_t sz = (size_t)(end - from);
>>>>>>>>>>>> +
>>>>>>>>>>>> + memcpy(to, from, sz);
>>>>>>>>>>>> +}
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> +
>>>>>>>>>>>> /*
>>>>>>>>>>>> * setup_vm() is called from head.S with MMU-off.
>>>>>>>>>>>> *
>>>>>>>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
>>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>>>>>>>>
>>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>>>>>>>>> {
>>>>>>>>>>>> - uintptr_t va, pa, end_va;
>>>>>>>>>>>> + uintptr_t va, end_va;
>>>>>>>>>>>> + uintptr_t __maybe_unused pa;
>>>>>>>>>>>> uintptr_t load_pa = (uintptr_t)(&_start);
>>>>>>>>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
>>>>>>>>>>>> uintptr_t map_size;
>>>>>>>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>>>>> dtb_pa)
>>>>>>>>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
>>>>>>>>>>>> #endif
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
>>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>>>>>>>> (uintptr_t)(&_xiprom);
>>>>>>>>>>>> +
>>>>>>>>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
>>>>>>>>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> va_pa_offset = PAGE_OFFSET - load_pa;
>>>>>>>>>
>>>>>>>>> I should have seen this before, I was too focused on having a XIP
>>>>>>>>> kernel
>>>>>>>>> boot. I already moved the kernel mapping in the vmalloc zone: the
>>>>>>>>> virtual to physical translations need to be handled differently
>>>>>>>>> now that
>>>>>>>>> the kernel mapping does not lie into linear mapping anymore, we can't
>>>>>>>>> use va_pa_offset defined above for both mappings.
>>>>>>>>>
>>>>>>>>> I was rebasing my patchset on the XIP patch but I believe that
>>>>>>>>> doing the
>>>>>>>>> other way around would greatly simplify the XIP patch as the kernel
>>>>>>>>> mapping would already be moved outside the linear mapping, there
>>>>>>>>> would
>>>>>>>>> be no need to reserve a zone in vmalloc anymore (that simplifies
>>>>>>>>> pgtable.h quite a lot). And the XIP kernel mapping could be
>>>>>>>>> implemented
>>>>>>>>> in a new create_kernel_page_table (that would also simplify
>>>>>>>>> mm/init.c).
>>>>>>>>>
>>>>>>>>> I can help to do that but I don't think we should merge this patch
>>>>>>>>> as is
>>>>>>>>> now.
>>>>>>>>
>>>>>>>> I think that's the right way to go for now: it's a lot harder to test
>>>>>>>> the XIP stuff, as it requires a bunch of harness changes. So let's
>>>>>>>> take the page table refactoring in now and rebase this stuff on top of
>>>>>>>> it. There's really no way to do both without making more work for
>>>>>>>> someone, it's just a headache on timing.
>>>>>>>>
>>>>>>>> Alex: if you want to sign up to spend some time there that'd be great,
>>>>>>>> otherwise I will.
>>>>>>>
>>>>>>> I can take care of that, no problem.
>>>>>>
>>>>>> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
>>>>>> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my
>>>>>> setup.
>>>>>>
>>>>>> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
>>>>>> any other kernel at the end of the address space, not in the vmalloc
>>>>>> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
>>>>>> pfn_valid, copy_data and other stuff).
>>>>>>
>>>>>> Any comment is welcome !
>>>>>
>>>>> thanks for your efforts!
>>>>>
>>>>> I've just built your version. The build went well, but the image
>>>>> doesn't seem to boot for me.
>>>>
>>>> Too bad. Can you give me your config please ?
>>>>
>>>
>>> Apparently, as you can see below, your config works for me, at least it
>>> reaches userspace. Do you have traces or more info about what is wrong ?
>>
>> Console output is just the same but it stops after the following line:
>> [ 0.003208] Console: colour dummy device 80x25
>>
>> I did some very simplistic debugging bisecting start_kernel()
>> execution and I could see that setup_per_cpu_pageset() was reached
>> while calibrate_delay() was not.
>>
>> How (and whether) this might be related to XIP I don't know :)
>
> A short update: the system would hang in sched_clock_init() if run
> with 'go 21000000' command.
The output I pasted came from a boot using 'go', I can't make 'booti'
work in my setup.
And you don't have this issue with your patch right ?
Can you give me any config that could allow me to reproduce this
(uboot/buildroot) ? And your qemu version ?
Thanks,
> If I use 'booti' command it passes and goes further all the way to
> mounting the userspace
>
> So the problem is rather SMP related than XIP related.
>
> Best regards,
> Vitaly
>
>>> Thanks!
>>>
>>> [ 0.000000] Linux version 5.12.0-rc2 (alex@debian)
>>> (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.11.2) 9.3.0,
>>> GNU ld (GNU Binutils) 2.34) #322 SMP Sat Apr 3 05:50:18 EDT 2021
>>> [ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit
>>> [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
>>> [ 0.000000] printk: bootconsole [sbi0] enabled
>>> [ 0.000000] Zone ranges:
>>> [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff]
>>> [ 0.000000] Normal empty
>>> [ 0.000000] Movable zone start for each node
>>> [ 0.000000] Early memory node ranges
>>> [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff]
>>> [ 0.000000] Initmem setup node 0 [mem
>>> 0x0000000080000000-0x00000000bfffffff]
>>> [ 0.000000] On node 0 totalpages: 262144
>>> [ 0.000000] DMA32 zone: 3584 pages used for memmap
>>> [ 0.000000] DMA32 zone: 0 pages reserved
>>> [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
>>> [ 0.000000] SBI specification v0.2 detected
>>> [ 0.000000] SBI implementation ID=0x1 Version=0x6
>>> [ 0.000000] SBI v0.2 TIME extension detected
>>> [ 0.000000] SBI v0.2 IPI extension detected
>>> [ 0.000000] SBI v0.2 RFENCE extension detected
>>> [ 0.000000] software IO TLB: mapped [mem
>>> 0x00000000b9e00000-0x00000000bde00000] (64MB)
>>> [ 0.000000] CPU with hartid=0 is not available
>>> [ 0.000000] CPU with hartid=0 is not available
>>> [ 0.000000] riscv: ISA extensions acdfim
>>> [ 0.000000] riscv: ELF capabilities acdfim
>>> [ 0.000000] percpu: Embedded 17 pages/cpu s29856 r8192 d31584 u69632
>>> [ 0.000000] pcpu-alloc: s29856 r8192 d31584 u69632 alloc=17*4096
>>> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
>>> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258560
>>> [ 0.000000] Kernel command line: earlyprintk debug earlycon=sbi
>>> console=ttyS0,115200n8 root=/dev/ram0 init=/sbin/init
>>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 8,
>>> 1048576 bytes, linear)
>>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288
>>> bytes, linear)
>>> [ 0.000000] Sorting __ex_table...
>>> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
>>> [ 0.000000] Memory: 947732K/1048576K available (2999K kernel code,
>>> 692K rwdata, 953K rodata, 205K init, 247K bss, 100844K reserved, 0K
>>> cma-reserved)
>>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>> [ 0.000000] rcu: Hierarchical RCU implementation.
>>> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
>>> [ 0.000000] rcu: RCU debug extended QS entry/exit.
>>> [ 0.000000] Tracing variant of Tasks RCU enabled.
>>> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
>>> is 25 jiffies.
>>> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>>> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
>>> [ 0.000000] CPU with hartid=0 is not available
>>> [ 0.000000] riscv-intc: unable to find hart id for
>>> /cpus/cpu@0/interrupt-controller
>>> [ 0.000000] riscv-intc: 64 local interrupts mapped
>>> [ 0.000000] plic: interrupt-controller@c000000: mapped 186 interrupts
>>> with 4 handlers for 9 contexts.
>>> [ 0.000000] random: get_random_bytes called from
>>> start_kernel+0x2fe/0x49c with crng_init=0
>>> [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0]
>>> hartid [1]
>>> [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff
>>> max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
>>> [ 0.000146] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps
>>> every 2199023255500ns
>>> [ 0.006056] Console: colour dummy device 80x25
>>> [ 0.015242] Calibrating delay loop (skipped), value calculated using
>>> timer frequency.. 2.00 BogoMIPS (lpj=4000)
>>> [ 0.017130] pid_max: default: 32768 minimum: 301
>>> [ 0.020115] Mount-cache hash table entries: 2048 (order: 2, 16384
>>> bytes, linear)
>>> [ 0.021097] Mountpoint-cache hash table entries: 2048 (order: 2,
>>> 16384 bytes, linear)
>>> [ 0.078755] ASID allocator using 16 bits (65536 entries)
>>> [ 0.083669] rcu: Hierarchical SRCU implementation.
>>> [ 0.093304] smp: Bringing up secondary CPUs ...
>>> [ 1.149900] CPU1: failed to come online
>>> [ 2.204183] CPU2: failed to come online
>>> [ 3.256211] CPU3: failed to come online
>>> [ 3.257043] smp: Brought up 1 node, 1 CPU
>>> [ 3.269554] devtmpfs: initialized
>>> [ 3.282015] clocksource: jiffies: mask: 0xffffffff max_cycles:
>>> 0xffffffff, max_idle_ns: 7645041785100000 ns
>>> [ 3.283484] futex hash table entries: 1024 (order: 4, 65536 bytes,
>>> linear)
>>> [ 3.381718] SCSI subsystem initialized
>>> [ 3.385115] clocksource: Switched to clocksource riscv_clocksource
>>> [ 3.602198] workingset: timestamp_bits=62 max_order=18 bucket_order=0
>>> [ 3.624182] Block layer SCSI generic (bsg) driver version 0.4 loaded
>>> (major 253)
>>> [ 3.625988] io scheduler mq-deadline registered
>>> [ 3.626725] io scheduler kyber registered
>>> [ 3.629047] start plist test
>>> [ 3.641420] end plist test
>>> [ 3.717639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>>> [ 3.752315] brd: module loaded
>>> [ 3.790207] loop: module loaded
>>> [ 3.793943] mousedev: PS/2 mouse device common for all mice
>>> [ 3.810511] Warning: unable to open an initial console.
>>> [ 3.811923] Freeing unused kernel memory: 88K
>>> [ 3.812558] This architecture does not have kernel memory protection.
>>> [ 3.814280] Run /init as init process
>>> [ 3.814808] with arguments:
>>> [ 3.815227] /init
>>> [ 3.815539] with environment:
>>> [ 3.815924] HOME=/
>>> [ 3.816250] TERM=linux
>>> [ 4.398678] random: dd: uninitialized urandom read (512 bytes read)
>>>
>>>
>>>> Thanks,
>>>>
>>>> Alex
>>>>
>>>>> I'll take a look at the code later today.
>>>>>
>>>>> Best regards,
>>>>> Vitaly
>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Alex
>>>>>>
>>>>>>>
>>>>>>>> Either way, can you point me (either just indicate the old version is
>>>>>>>> OK or send a new one) to what you want me to look at WRT the page
>>>>>>>> table code? IIRC it looked pretty much fine, but I'll take another
>>>>>>>> look ASAP so we can avoid serializing everything.
>>>>>>>
>>>>>>> The v3 is fine for me:
>>>>>>> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> Alex
>>>>>>>>>
>>>>>>>>>>>> pfn_base = PFN_DOWN(load_pa);
>>>>>>>>>>>>
>>>>>>>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>>>>> dtb_pa)
>>>>>>>>>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
>>>>>>>>>>>> #endif
>>>>>>>>>>>>
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
>>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
>>>>>>>>>>>> PAGE_TABLE);
>>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
>>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>>>>>>>> + va += PMD_SIZE) {
>>>>>>>>>>>> + create_pmd_mapping(xip_pmd, va,
>>>>>>>>>>>> + xiprom + (va -
>>>>>>>>>>>> XIP_VIRT_ADDR_START),
>>>>>>>>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
>>>>>>>>>>>> + }
>>>>>>>>>>>> +
>>>>>>>>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
>>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
>>>>>>>>>>>> PAGE_TABLE);
>>>>>>>>>>>> +#endif
>>>>>>>>>>>> +
>>>>>>>>>>>> /*
>>>>>>>>>>>> * Setup early PGD covering entire kernel which will
>>>>>>>>>>>> allows
>>>>>>>>>>>> * us to reach paging_init(). We map all memory banks
>>>>>>>>>>>> later
>>>>>>>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>>>>> dtb_pa)
>>>>>>>>>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
>>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>>>>>>>> (PMD_SIZE - 1));
>>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
>>>>>>>>>>>> - dtb_early_va = __va(dtb_pa);
>>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
>>>>>>>>>>>> #else
>>>>>>>>>>>> #ifndef CONFIG_BUILTIN_DTB
>>>>>>>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>>>>> dtb_pa)
>>>>>>>>>>>> pa + PGDIR_SIZE, PGDIR_SIZE,
>>>>>>>>>>>> PAGE_KERNEL);
>>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>>>>>>>> (PGDIR_SIZE - 1));
>>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
>>>>>>>>>>>> - dtb_early_va = __va(dtb_pa);
>>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
>>>>>>>>>>>> #endif
>>>>>>>>>>>> dtb_early_pa = dtb_pa;
>>>>>>>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
>>>>>>>>>>>> uintptr_t va, map_size;
>>>>>>>>>>>> phys_addr_t pa, start, end;
>>>>>>>>>>>> u64 i;
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>>>>>>>> (uintptr_t)(&_xiprom);
>>>>>>>>>>>> +#endif
>>>>>>>>>>>>
>>>>>>>>>>>> /**
>>>>>>>>>>>> * MMU is enabled at this point. But page table setup is
>>>>>>>>>>>> not complete yet.
>>>>>>>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
>>>>>>>>>>>> map_size,
>>>>>>>>>>>> PAGE_KERNEL_EXEC);
>>>>>>>>>>>> }
>>>>>>>>>>>> }
>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
>>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
>>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>>>>>>>> + va += map_size)
>>>>>>>>>>>> + create_pgd_mapping(swapper_pg_dir, va,
>>>>>>>>>>>> + CONFIG_XIP_PHYS_ADDR + (va -
>>>>>>>>>>>> XIP_VIRT_ADDR_START),
>>>>>>>>>>>> + map_size, PAGE_KERNEL_EXEC);
>>>>>>>>>>>> +
>>>>>>>>>>>> +#endif
>>>>>>>>>>>>
>>>>>>>>>>>> /* Clear fixmap PTE and PMD mappings */
>>>>>>>>>>>> clear_fixmap(FIX_PTE);
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> linux-riscv mailing list
>>>>>>>>>> [email protected]
>>>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> linux-riscv mailing list
>>>>>>>> [email protected]
>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> linux-riscv mailing list
>>>>>>> [email protected]
>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>
>>>>> _______________________________________________
>>>>> linux-riscv mailing list
>>>>> [email protected]
>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
Le 4/6/21 à 3:54 AM, Vitaly Wool a écrit :
> On Tue, Apr 6, 2021 at 8:47 AM Alex Ghiti <[email protected]> wrote:
>>
>> Hi Vitaly,
>>
>> Le 4/5/21 à 4:34 AM, Vitaly Wool a écrit :
>>> On Sun, Apr 4, 2021 at 10:39 AM Vitaly Wool <[email protected]> wrote:
>>>>
>>>> On Sat, Apr 3, 2021 at 12:00 PM Alex Ghiti <[email protected]> wrote:
>>>>>
>>>>> Hi Vitaly,
>>>>>
>>>>> Le 4/1/21 à 7:10 AM, Alex Ghiti a écrit :
>>>>>> Le 4/1/21 à 4:52 AM, Vitaly Wool a écrit :
>>>>>>> Hi Alex,
>>>>>>>
>>>>>>> On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <[email protected]> wrote:
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit :
>>>>>>>>> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit :
>>>>>>>>>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), [email protected] wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit :
>>>>>>>>>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt
>>>>>>>>>>>> <[email protected]> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), [email protected]
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms.
>>>>>>>>>>>>>> It allows code to be executed directly from non-volatile storage
>>>>>>>>>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can
>>>>>>>>>>>>>> be found on many RISC-V platforms. This makes way for significant
>>>>>>>>>>>>>> optimization of RAM footprint. The XIP kernel is not compressed
>>>>>>>>>>>>>> since it has to run directly from flash, so it will occupy more
>>>>>>>>>>>>>> space on the non-volatile storage. The physical flash address used
>>>>>>>>>>>>>> to link the kernel object files and for storing it has to be known
>>>>>>>>>>>>>> at compile time and is represented by a Kconfig option.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled
>>>>>>>>>>>>>> kernels.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Signed-off-by: Vitaly Wool <[email protected]>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ---
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Changes in v2:
>>>>>>>>>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled
>>>>>>>>>>>>>> yet
>>>>>>>>>>>>>> o both for 32-bit and 64-bit RISC-V
>>>>>>>>>>>>>> - SP is explicitly set to a safe place in RAM before
>>>>>>>>>>>>>> __copy_data call
>>>>>>>>>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S
>>>>>>>>>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>>>>>>>>>>>>>> Changes in v3:
>>>>>>>>>>>>>> - rebased against latest for-next
>>>>>>>>>>>>>> - XIP address fixup macro now takes an argument
>>>>>>>>>>>>>> - SMP related fixes
>>>>>>>>>>>>>> Changes in v4:
>>>>>>>>>>>>>> - rebased against the current for-next
>>>>>>>>>>>>>> - less #ifdef's in C/ASM code
>>>>>>>>>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S
>>>>>>>>>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__
>>>>>>>>>>>>>> - Fixed multi-core boot
>>>>>>>>>>>>>> Changes in v5:
>>>>>>>>>>>>>> - fixed build error for non-XIP kernels
>>>>>>>>>>>>>> Changes in v6:
>>>>>>>>>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE
>>>>>>>>>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of
>>>>>>>>>>>>>> PHYS_RAM_BASE in non-XIP configurations if needed
>>>>>>>>>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid
>>>>>>>>>>>>>> side
>>>>>>>>>>>>>> effects
>>>>>>>>>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB
>>>>>>>>>>>>>
>>>>>>>>>>>>> So v5 landed on for-next, which generally means it's best to avoid
>>>>>>>>>>>>> re-spinning the patch and instead send along fixups. That said,
>>>>>>>>>>>>> the v5
>>>>>>>>>>>>> is causing some testing failures for me.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I'm going to drop the v5 for now as I don't have time to test this
>>>>>>>>>>>>> tonight. I'll try and take a look soon, as it will conflict with
>>>>>>>>>>>>> Alex's
>>>>>>>>>>>>> patches.
>>>>>>>>>>>>
>>>>>>>>>>>> I can come up with the incremental patch instead pretty much
>>>>>>>>>>>> straight
>>>>>>>>>>>> away if that works better.
>>>>>>>>>>>>
>>>>>>>>>>>> ~Vitaly
>>>>>>>>>>>>
>>>>>>>>>>>>>> arch/riscv/Kconfig | 49 ++++++++++-
>>>>>>>>>>>>>> arch/riscv/Makefile | 8 +-
>>>>>>>>>>>>>> arch/riscv/boot/Makefile | 13 +++
>>>>>>>>>>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++--
>>>>>>>>>>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++-
>>>>>>>>>>>>>> arch/riscv/kernel/head.S | 49 ++++++++++-
>>>>>>>>>>>>>> arch/riscv/kernel/head.h | 3 +
>>>>>>>>>>>>>> arch/riscv/kernel/setup.c | 8 +-
>>>>>>>>>>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132
>>>>>>>>>>>>>> ++++++++++++++++++++++++++++
>>>>>>>>>>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++
>>>>>>>>>>>>>> arch/riscv/mm/init.c | 100 +++++++++++++++++++--
>>>>>>>>>>>>>> 11 files changed, 426 insertions(+), 18 deletions(-)
>>>>>>>>>>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>>>>>>>>>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644
>>>>>>>>>>>>>> --- a/arch/riscv/Kconfig
>>>>>>>>>>>>>> +++ b/arch/riscv/Kconfig
>>>>>>>>>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> config EFI
>>>>>>>>>>>>>> bool "UEFI runtime support"
>>>>>>>>>>>>>> - depends on OF
>>>>>>>>>>>>>> + depends on OF && !XIP_KERNEL
>>>>>>>>>>>>>> select LIBFDT
>>>>>>>>>>>>>> select UCS2_STRING
>>>>>>>>>>>>>> select EFI_PARAMS_FROM_FDT
>>>>>>>>>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK
>>>>>>>>>>>>>> def_bool y
>>>>>>>>>>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +config PHYS_RAM_BASE_FIXED
>>>>>>>>>>>>>> + bool "Explicitly specified physical RAM address"
>>>>>>>>>>>>>> + default n
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +config PHYS_RAM_BASE
>>>>>>>>>>>>>> + hex "Platform Physical RAM address"
>>>>>>>>>>>>>> + depends on PHYS_RAM_BASE_FIXED
>>>>>>>>>>>>>> + default "0x80000000"
>>>>>>>>>>>>>> + help
>>>>>>>>>>>>>> + This is the physical address of RAM in the system. It has
>>>>>>>>>>>>>> to be
>>>>>>>>>>>>>> + explicitly specified to run early relocations of
>>>>>>>>>>>>>> read-write data
>>>>>>>>>>>>>> + from flash to RAM.
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +config XIP_KERNEL
>>>>>>>>>>>>>> + bool "Kernel Execute-In-Place from ROM"
>>>>>>>>>>>>>> + depends on MMU
>>>>>>>>>>>>>> + select PHYS_RAM_BASE_FIXED
>>>>>>>>>>>>>> + help
>>>>>>>>>>>>>> + Execute-In-Place allows the kernel to run from
>>>>>>>>>>>>>> non-volatile storage
>>>>>>>>>>>>>> + directly addressable by the CPU, such as NOR flash. This
>>>>>>>>>>>>>> saves RAM
>>>>>>>>>>>>>> + space since the text section of the kernel is not loaded
>>>>>>>>>>>>>> from flash
>>>>>>>>>>>>>> + to RAM. Read-write sections, such as the data section and
>>>>>>>>>>>>>> stack,
>>>>>>>>>>>>>> + are still copied to RAM. The XIP kernel is not compressed
>>>>>>>>>>>>>> since
>>>>>>>>>>>>>> + it has to run directly from flash, so it will take more
>>>>>>>>>>>>>> space to
>>>>>>>>>>>>>> + store it. The flash address used to link the kernel
>>>>>>>>>>>>>> object files,
>>>>>>>>>>>>>> + and for storing it, is configuration dependent. Therefore,
>>>>>>>>>>>>>> if you
>>>>>>>>>>>>>> + say Y here, you must know the proper physical address
>>>>>>>>>>>>>> where to
>>>>>>>>>>>>>> + store the kernel image depending on your own flash memory
>>>>>>>>>>>>>> usage.
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + Also note that the make target becomes "make xipImage"
>>>>>>>>>>>>>> rather than
>>>>>>>>>>>>>> + "make zImage" or "make Image". The final kernel binary to
>>>>>>>>>>>>>> put in
>>>>>>>>>>>>>> + ROM memory will be arch/riscv/boot/xipImage.
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + If unsure, say N.
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +config XIP_PHYS_ADDR
>>>>>>>>>>>>>> + hex "XIP Kernel Physical Location"
>>>>>>>>>>>>>> + depends on XIP_KERNEL
>>>>>>>>>>>>>> + default "0x21000000"
>>>>>>>>>>>>>> + help
>>>>>>>>>>>>>> + This is the physical address in your flash memory the
>>>>>>>>>>>>>> kernel will
>>>>>>>>>>>>>> + be linked for and stored to. This address is dependent on
>>>>>>>>>>>>>> your
>>>>>>>>>>>>>> + own flash usage.
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> endmenu
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> config BUILTIN_DTB
>>>>>>>>>>>>>> - def_bool n
>>>>>>>>>>>>>> + bool
>>>>>>>>>>>>>> depends on OF
>>>>>>>>>>>>>> + default y if XIP_KERNEL
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> menu "Power management options"
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
>>>>>>>>>>>>>> index 1368d943f1f3..8fcbec03974d 100644
>>>>>>>>>>>>>> --- a/arch/riscv/Makefile
>>>>>>>>>>>>>> +++ b/arch/riscv/Makefile
>>>>>>>>>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> # Default target when executing plain make
>>>>>>>>>>>>>> boot := arch/riscv/boot
>>>>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>>>>>>>> +KBUILD_IMAGE := $(boot)/xipImage
>>>>>>>>>>>>>> +else
>>>>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
>>>>>>>>>>>>>> +endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> head-y := arch/riscv/kernel/head.o
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install
>>>>>>>>>>>>>> vdso_install:
>>>>>>>>>>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>>>>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
>>>>>>>>>>>>>> KBUILD_IMAGE := $(boot)/loader.bin
>>>>>>>>>>>>>> else
>>>>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz
>>>>>>>>>>>>>> endif
>>>>>>>>>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin
>>>>>>>>>>>>>> +endif
>>>>>>>>>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> all: $(notdir $(KBUILD_IMAGE))
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
>>>>>>>>>>>>>> index 03404c84f971..6bf299f70c27 100644
>>>>>>>>>>>>>> --- a/arch/riscv/boot/Makefile
>>>>>>>>>>>>>> +++ b/arch/riscv/boot/Makefile
>>>>>>>>>>>>>> @@ -17,8 +17,21 @@
>>>>>>>>>>>>>> KCOV_INSTRUMENT := n
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R
>>>>>>>>>>>>>> .note.gnu.build-id -R
>>>>>>>>>>>>>> .comment -S
>>>>>>>>>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id
>>>>>>>>>>>>>> -R .comment -S
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>>>>>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin
>>>>>>>>>>>>>> xipImage
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
>>>>>>>>>>>>>> +cmd_mkxip = $(cmd_objcopy)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +$(obj)/xipImage: vmlinux FORCE
>>>>>>>>>>>>>> + $(call if_changed,mkxip)
>>>>>>>>>>>>>> + @$(kecho) ' Physical Address of xipImage:
>>>>>>>>>>>>>> $(CONFIG_XIP_PHYS_ADDR)'
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> $(obj)/Image: vmlinux FORCE
>>>>>>>>>>>>>> $(call if_changed,objcopy)
>>>>>>>>>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h
>>>>>>>>>>>>>> b/arch/riscv/include/asm/pgtable.h
>>>>>>>>>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644
>>>>>>>>>>>>>> --- a/arch/riscv/include/asm/pgtable.h
>>>>>>>>>>>>>> +++ b/arch/riscv/include/asm/pgtable.h
>>>>>>>>>>>>>> @@ -11,6 +11,33 @@
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> #include <asm/pgtable-bits.h>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_MMU
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M)
>>>>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#define XIP_OFFSET SZ_8M
>>>>>>>>>>>>>> +#define XIP_MASK (SZ_8M - 1)
>>>>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) \
>>>>>>>>>>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>>>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr)
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>> +#endif /* CONFIG_MMU */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> #ifndef __ASSEMBLY__
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> /* Page Upper Directory not used in RISC-V */
>>>>>>>>>>>>>> @@ -21,9 +48,25 @@
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
>>>>>>>>>>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1)
>>>>>>>>>>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +/*
>>>>>>>>>>>>>> + * Since we use sections to map it, this macro replaces the
>>>>>>>>>>>>>> physical address
>>>>>>>>>>>>>> + * with its virtual address while keeping offset from the base
>>>>>>>>>>>>>> section.
>>>>>>>>>>>>>> + */
>>>>>>>>>>>>>> +#define XIP_PHYS_ADDR(va) \
>>>>>>>>>>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET +
>>>>>>>>>>>>>> CONFIG_XIP_PHYS_ADDR)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#define XIP_FIXUP(addr) ({ \
>>>>>>>>>>>>>> + uintptr_t __a = (uintptr_t)(addr); \
>>>>>>>>>>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \
>>>>>>>>>>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
>>>>>>>>>>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE -
>>>>>>>>>>>>>> XIP_OFFSET : __a; \
>>>>>>>>>>>>>> +})
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> +#define XIP_FIXUP(addr) (addr)
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M)
>>>>>>>>>>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET -
>>>>>>>>>>>>>> BPF_JIT_REGION_SIZE)
>>>>>>>>>>>>>> @@ -484,8 +527,20 @@ static inline int
>>>>>>>>>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> #define kern_addr_valid(addr) (1) /* FIXME */
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -extern void *dtb_early_va;
>>>>>>>>>>>>>> -extern uintptr_t dtb_early_pa;
>>>>>>>>>>>>>> +extern void *_dtb_early_va;
>>>>>>>>>>>>>> +extern uintptr_t _dtb_early_pa;
>>>>>>>>>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
>>>>>>>>>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#define dtb_early_va _dtb_early_va
>>>>>>>>>>>>>> +#define dtb_early_pa _dtb_early_pa
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> void setup_bootmem(void);
>>>>>>>>>>>>>> void paging_init(void);
>>>>>>>>>>>>>> void misc_mem_init(void);
>>>>>>>>>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>>>>>>> index 685fae72b7f5..2413c2997350 100644
>>>>>>>>>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
>>>>>>>>>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned
>>>>>>>>>>>>>> long hartid)
>>>>>>>>>>>>>> }
>>>>>>>>>>>>>> #endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +static inline unsigned long get_secondary_start_phys(void)
>>>>>>>>>>>>>> +{
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi);
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> + return __pa_symbol(secondary_start_sbi);
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> +}
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> static int sbi_cpu_start(unsigned int cpuid, struct task_struct
>>>>>>>>>>>>>> *tidle)
>>>>>>>>>>>>>> {
>>>>>>>>>>>>>> int rc;
>>>>>>>>>>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
>>>>>>>>>>>>>> + unsigned long boot_addr = get_secondary_start_phys();
>>>>>>>>>>>>>> int hartid = cpuid_to_hartid_map(cpuid);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> cpu_update_secondary_bootdata(cpuid, tidle);
>>>>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
>>>>>>>>>>>>>> index f5a9bad86e58..bbe74e37914f 100644
>>>>>>>>>>>>>> --- a/arch/riscv/kernel/head.S
>>>>>>>>>>>>>> +++ b/arch/riscv/kernel/head.S
>>>>>>>>>>>>>> @@ -9,11 +9,23 @@
>>>>>>>>>>>>>> #include <linux/linkage.h>
>>>>>>>>>>>>>> #include <asm/thread_info.h>
>>>>>>>>>>>>>> #include <asm/page.h>
>>>>>>>>>>>>>> +#include <asm/pgtable.h>
>>>>>>>>>>>>>> #include <asm/csr.h>
>>>>>>>>>>>>>> #include <asm/hwcap.h>
>>>>>>>>>>>>>> #include <asm/image.h>
>>>>>>>>>>>>>> #include "efi-header.S"
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>>>>>>>>>> + REG_L t0, _xip_fixup
>>>>>>>>>>>>>> + add \reg, \reg, t0
>>>>>>>>>>>>>> +.endm
>>>>>>>>>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR -
>>>>>>>>>>>>>> XIP_OFFSET
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg
>>>>>>>>>>>>>> +.endm
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> __HEAD
>>>>>>>>>>>>>> ENTRY(_start)
>>>>>>>>>>>>>> /*
>>>>>>>>>>>>>> @@ -69,7 +81,11 @@ pe_head_start:
>>>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>>>> relocate:
>>>>>>>>>>>>>> /* Relocate return address */
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> li a1, PAGE_OFFSET
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> la a2, _start
>>>>>>>>>>>>>> sub a1, a1, a2
>>>>>>>>>>>>>> add ra, ra, a1
>>>>>>>>>>>>>> @@ -91,6 +107,7 @@ relocate:
>>>>>>>>>>>>>> * to ensure the new translations are in use.
>>>>>>>>>>>>>> */
>>>>>>>>>>>>>> la a0, trampoline_pg_dir
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
>>>>>>>>>>>>>> srl a0, a0, PAGE_SHIFT
>>>>>>>>>>>>>> or a0, a0, a1
>>>>>>>>>>>>>> sfence.vma
>>>>>>>>>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> slli a3, a0, LGREG
>>>>>>>>>>>>>> la a4, __cpu_up_stack_pointer
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET a4
>>>>>>>>>>>>>> la a5, __cpu_up_task_pointer
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET a5
>>>>>>>>>>>>>> add a4, a3, a4
>>>>>>>>>>>>>> add a5, a3, a5
>>>>>>>>>>>>>> REG_L sp, (a4)
>>>>>>>>>>>>>> @@ -156,6 +175,7 @@ secondary_start_common:
>>>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>>>> /* Enable virtual memory and relocate to virtual
>>>>>>>>>>>>>> address */
>>>>>>>>>>>>>> la a0, swapper_pg_dir
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
>>>>>>>>>>>>>> call relocate
>>>>>>>>>>>>>> #endif
>>>>>>>>>>>>>> call setup_trap_vector
>>>>>>>>>>>>>> @@ -236,12 +256,33 @@ pmp_done:
>>>>>>>>>>>>>> .Lgood_cores:
>>>>>>>>>>>>>> #endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> /* Pick one hart to run the main boot sequence */
>>>>>>>>>>>>>> la a3, hart_lottery
>>>>>>>>>>>>>> li a2, 1
>>>>>>>>>>>>>> amoadd.w a3, a2, (a3)
>>>>>>>>>>>>>> bnez a3, .Lsecondary_start
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> + /* hart_lottery in flash contains a magic number */
>>>>>>>>>>>>>> + la a3, hart_lottery
>>>>>>>>>>>>>> + mv a2, a3
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
>>>>>>>>>>>>>> + lw t1, (a3)
>>>>>>>>>>>>>> + amoswap.w t0, t1, (a2)
>>>>>>>>>>>>>> + /* first time here if hart_lottery in RAM is not set */
>>>>>>>>>>>>>> + beq t0, t1, .Lsecondary_start
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + la sp, _end + THREAD_SIZE
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET sp
>>>>>>>>>>>>>> + mv s0, a0
>>>>>>>>>>>>>> + call __copy_data
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + /* Restore a0 copy */
>>>>>>>>>>>>>> + mv a0, s0
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> /* Clear BSS for flat non-ELF images */
>>>>>>>>>>>>>> la a3, __bss_start
>>>>>>>>>>>>>> la a4, __bss_stop
>>>>>>>>>>>>>> @@ -251,15 +292,18 @@ clear_bss:
>>>>>>>>>>>>>> add a3, a3, RISCV_SZPTR
>>>>>>>>>>>>>> blt a3, a4, clear_bss
>>>>>>>>>>>>>> clear_bss_done:
>>>>>>>>>>>>>> -
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> /* Save hart ID and DTB physical address */
>>>>>>>>>>>>>> mv s0, a0
>>>>>>>>>>>>>> mv s1, a1
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> la a2, boot_cpu_hartid
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
>>>>>>>>>>>>>> REG_S a0, (a2)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> /* Initialize page tables and relocate to virtual
>>>>>>>>>>>>>> addresses */
>>>>>>>>>>>>>> la sp, init_thread_union + THREAD_SIZE
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET sp
>>>>>>>>>>>>>> #ifdef CONFIG_BUILTIN_DTB
>>>>>>>>>>>>>> la a0, __dtb_start
>>>>>>>>>>>>>> #else
>>>>>>>>>>>>>> @@ -268,6 +312,7 @@ clear_bss_done:
>>>>>>>>>>>>>> call setup_vm
>>>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>>>> la a0, early_pg_dir
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET a0
>>>>>>>>>>>>>> call relocate
>>>>>>>>>>>>>> #endif /* CONFIG_MMU */
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> @@ -292,7 +337,9 @@ clear_bss_done:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> slli a3, a0, LGREG
>>>>>>>>>>>>>> la a1, __cpu_up_stack_pointer
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET a1
>>>>>>>>>>>>>> la a2, __cpu_up_task_pointer
>>>>>>>>>>>>>> + XIP_FIXUP_OFFSET a2
>>>>>>>>>>>>>> add a1, a3, a1
>>>>>>>>>>>>>> add a2, a3, a2
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
>>>>>>>>>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644
>>>>>>>>>>>>>> --- a/arch/riscv/kernel/head.h
>>>>>>>>>>>>>> +++ b/arch/riscv/kernel/head.h
>>>>>>>>>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> asmlinkage void do_page_fault(struct pt_regs *regs);
>>>>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +asmlinkage void __init __copy_data(void);
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> extern void *__cpu_up_stack_pointer[];
>>>>>>>>>>>>>> extern void *__cpu_up_task_pointer[];
>>>>>>>>>>>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>>>>>>>>>>>>>> index e85bacff1b50..a0384c72c272 100644
>>>>>>>>>>>>>> --- a/arch/riscv/kernel/setup.c
>>>>>>>>>>>>>> +++ b/arch/riscv/kernel/setup.c
>>>>>>>>>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info
>>>>>>>>>>>>>> __section(".data") = {
>>>>>>>>>>>>>> * This is used before the kernel initializes the BSS so it
>>>>>>>>>>>>>> can't be in the
>>>>>>>>>>>>>> * BSS.
>>>>>>>>>>>>>> */
>>>>>>>>>>>>>> -atomic_t hart_lottery __section(".sdata");
>>>>>>>>>>>>>> +atomic_t hart_lottery __section(".sdata")
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> += ATOMIC_INIT(0xC001BEEF)
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> +;
>>>>>>>>>>>>>> unsigned long boot_cpu_hartid;
>>>>>>>>>>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p)
>>>>>>>>>>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
>>>>>>>>>>>>>> unflatten_and_copy_device_tree();
>>>>>>>>>>>>>> #else
>>>>>>>>>>>>>> - if (early_init_dt_verify(__va(dtb_early_pa)))
>>>>>>>>>>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
>>>>>>>>>>>>>> unflatten_device_tree();
>>>>>>>>>>>>>> else
>>>>>>>>>>>>>> pr_err("No DTB found in kernel mappings\n");
>>>>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>>>>>>> new file mode 100644
>>>>>>>>>>>>>> index 000000000000..9f0f08c34cd3
>>>>>>>>>>>>>> --- /dev/null
>>>>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
>>>>>>>>>>>>>> @@ -0,0 +1,132 @@
>>>>>>>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>>>>>>>>>>>>> +/*
>>>>>>>>>>>>>> + * Copyright (C) 2012 Regents of the University of California
>>>>>>>>>>>>>> + * Copyright (C) 2017 SiFive
>>>>>>>>>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
>>>>>>>>>>>>>> + */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
>>>>>>>>>>>>>> +/* No __ro_after_init data in the .rodata section - which will
>>>>>>>>>>>>>> always be ro */
>>>>>>>>>>>>>> +#define RO_AFTER_INIT_DATA
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#include <asm/vmlinux.lds.h>
>>>>>>>>>>>>>> +#include <asm/page.h>
>>>>>>>>>>>>>> +#include <asm/pgtable.h>
>>>>>>>>>>>>>> +#include <asm/cache.h>
>>>>>>>>>>>>>> +#include <asm/thread_info.h>
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +OUTPUT_ARCH(riscv)
>>>>>>>>>>>>>> +ENTRY(_start)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +jiffies = jiffies_64;
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +SECTIONS
>>>>>>>>>>>>>> +{
>>>>>>>>>>>>>> + /* Beginning of code and text segment */
>>>>>>>>>>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
>>>>>>>>>>>>>> + _xiprom = .;
>>>>>>>>>>>>>> + _start = .;
>>>>>>>>>>>>>> + HEAD_TEXT_SECTION
>>>>>>>>>>>>>> + INIT_TEXT_SECTION(PAGE_SIZE)
>>>>>>>>>>>>>> + /* we have to discard exit text and such at runtime, not
>>>>>>>>>>>>>> link time */
>>>>>>>>>>>>>> + .exit.text :
>>>>>>>>>>>>>> + {
>>>>>>>>>>>>>> + EXIT_TEXT
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + .text : {
>>>>>>>>>>>>>> + _text = .;
>>>>>>>>>>>>>> + _stext = .;
>>>>>>>>>>>>>> + TEXT_TEXT
>>>>>>>>>>>>>> + SCHED_TEXT
>>>>>>>>>>>>>> + CPUIDLE_TEXT
>>>>>>>>>>>>>> + LOCK_TEXT
>>>>>>>>>>>>>> + KPROBES_TEXT
>>>>>>>>>>>>>> + ENTRY_TEXT
>>>>>>>>>>>>>> + IRQENTRY_TEXT
>>>>>>>>>>>>>> + SOFTIRQENTRY_TEXT
>>>>>>>>>>>>>> + *(.fixup)
>>>>>>>>>>>>>> + _etext = .;
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> + RO_DATA(L1_CACHE_BYTES)
>>>>>>>>>>>>>> + .srodata : {
>>>>>>>>>>>>>> + *(.srodata*)
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> + .init.rodata : {
>>>>>>>>>>>>>> + INIT_SETUP(16)
>>>>>>>>>>>>>> + INIT_CALLS
>>>>>>>>>>>>>> + CON_INITCALL
>>>>>>>>>>>>>> + INIT_RAM_FS
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> + _exiprom = .; /* End of XIP ROM area */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +/*
>>>>>>>>>>>>>> + * From this point, stuff is considered writable and will be
>>>>>>>>>>>>>> copied to RAM
>>>>>>>>>>>>>> + */
>>>>>>>>>>>>>> + __data_loc = ALIGN(16); /* location in file */
>>>>>>>>>>>>>> + . = PAGE_OFFSET; /* location in memory */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + _sdata = .; /* Start of data section */
>>>>>>>>>>>>>> + _data = .;
>>>>>>>>>>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
>>>>>>>>>>>>>> + _edata = .;
>>>>>>>>>>>>>> + __start_ro_after_init = .;
>>>>>>>>>>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) -
>>>>>>>>>>>>>> LOAD_OFFSET) {
>>>>>>>>>>>>>> + *(.data..ro_after_init)
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> + __end_ro_after_init = .;
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
>>>>>>>>>>>>>> + __init_begin = .;
>>>>>>>>>>>>>> + .init.data : {
>>>>>>>>>>>>>> + INIT_DATA
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> + .exit.data : {
>>>>>>>>>>>>>> + EXIT_DATA
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> + . = ALIGN(8);
>>>>>>>>>>>>>> + __soc_early_init_table : {
>>>>>>>>>>>>>> + __soc_early_init_table_start = .;
>>>>>>>>>>>>>> + KEEP(*(__soc_early_init_table))
>>>>>>>>>>>>>> + __soc_early_init_table_end = .;
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> + __soc_builtin_dtb_table : {
>>>>>>>>>>>>>> + __soc_builtin_dtb_table_start = .;
>>>>>>>>>>>>>> + KEEP(*(__soc_builtin_dtb_table))
>>>>>>>>>>>>>> + __soc_builtin_dtb_table_end = .;
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> + PERCPU_SECTION(L1_CACHE_BYTES)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
>>>>>>>>>>>>>> + __init_end = .;
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + .sdata : {
>>>>>>>>>>>>>> + __global_pointer$ = . + 0x800;
>>>>>>>>>>>>>> + *(.sdata*)
>>>>>>>>>>>>>> + *(.sbss*)
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
>>>>>>>>>>>>>> + EXCEPTION_TABLE(0x10)
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
>>>>>>>>>>>>>> + *(.rel.dyn*)
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + /*
>>>>>>>>>>>>>> + * End of copied data. We need a dummy section to get its
>>>>>>>>>>>>>> LMA.
>>>>>>>>>>>>>> + * Also located before final ALIGN() as trailing padding is
>>>>>>>>>>>>>> not stored
>>>>>>>>>>>>>> + * in the resulting binary file and useless to copy.
>>>>>>>>>>>>>> + */
>>>>>>>>>>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
>>>>>>>>>>>>>> + _edata_loc = LOADADDR(.data.endmark);
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + . = ALIGN(PAGE_SIZE);
>>>>>>>>>>>>>> + _end = .;
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + STABS_DEBUG
>>>>>>>>>>>>>> + DWARF_DEBUG
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + DISCARDS
>>>>>>>>>>>>>> +}
>>>>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>>>>>>> b/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>>>>>>> index de03cb22d0e9..6745ec325930 100644
>>>>>>>>>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S
>>>>>>>>>>>>>> @@ -4,7 +4,12 @@
>>>>>>>>>>>>>> * Copyright (C) 2017 SiFive
>>>>>>>>>>>>>> */
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +#include "vmlinux-xip.lds.S"
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> #define LOAD_OFFSET PAGE_OFFSET
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> #include <asm/vmlinux.lds.h>
>>>>>>>>>>>>>> #include <asm/page.h>
>>>>>>>>>>>>>> #include <asm/cache.h>
>>>>>>>>>>>>>> @@ -132,3 +137,4 @@ SECTIONS
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> DISCARDS
>>>>>>>>>>>>>> }
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
>>>>>>>>>>>>>> index 7f5036fbee8c..efe649d41f95 100644
>>>>>>>>>>>>>> --- a/arch/riscv/mm/init.c
>>>>>>>>>>>>>> +++ b/arch/riscv/mm/init.c
>>>>>>>>>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> extern char _start[];
>>>>>>>>>>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE
>>>>>>>>>>>>>> -void *dtb_early_va __initdata;
>>>>>>>>>>>>>> -uintptr_t dtb_early_pa __initdata;
>>>>>>>>>>>>>> +void *_dtb_early_va __initdata;
>>>>>>>>>>>>>> +uintptr_t _dtb_early_pa __initdata;
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> struct pt_alloc_ops {
>>>>>>>>>>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa);
>>>>>>>>>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void)
>>>>>>>>>>>>>> (unsigned long)VMALLOC_END);
>>>>>>>>>>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
>>>>>>>>>>>>>> (unsigned long)high_memory);
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
>>>>>>>>>>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>> }
>>>>>>>>>>>>>> #else
>>>>>>>>>>>>>> static void print_vm_layout(void) { }
>>>>>>>>>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void)
>>>>>>>>>>>>>> phys_addr_t dram_end = memblock_end_of_DRAM();
>>>>>>>>>>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> + vmlinux_start = __pa_symbol(&_sdata);
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */
>>>>>>>>>>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void)
>>>>>>>>>>>>>> memblock_allow_resize();
>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +extern char _xiprom[], _exiprom[];
>>>>>>>>>>>>>> +extern char _sdata[], _edata[];
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> #ifdef CONFIG_MMU
>>>>>>>>>>>>>> -static struct pt_alloc_ops pt_ops;
>>>>>>>>>>>>>> +static struct pt_alloc_ops _pt_ops;
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops))
>>>>>>>>>>>>>> +#else
>>>>>>>>>>>>>> +#define pt_ops _pt_ops
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> unsigned long va_pa_offset;
>>>>>>>>>>>>>> EXPORT_SYMBOL(va_pa_offset);
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +#define va_pa_offset (*((unsigned long
>>>>>>>>>>>>>> *)XIP_FIXUP(&va_pa_offset)))
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> unsigned long pfn_base;
>>>>>>>>>>>>>> EXPORT_SYMBOL(pfn_base);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE]
>>>>>>>>>>>>>> __page_aligned_bss;
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata
>>>>>>>>>>>>>> __aligned(PAGE_SIZE);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +#define trampoline_pg_dir ((pgd_t
>>>>>>>>>>>>>> *)XIP_FIXUP(trampoline_pg_dir))
>>>>>>>>>>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
>>>>>>>>>>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
>>>>>>>>>>>>>> pgprot_t prot)
>>>>>>>>>>>>>> {
>>>>>>>>>>>>>> unsigned long addr = __fix_to_virt(idx);
>>>>>>>>>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD]
>>>>>>>>>>>>>> __page_aligned_bss;
>>>>>>>>>>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
>>>>>>>>>>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata
>>>>>>>>>>>>>> __aligned(PAGE_SIZE);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss;
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
>>>>>>>>>>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
>>>>>>>>>>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd))
>>>>>>>>>>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
>>>>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
>>>>>>>>>>>>>> {
>>>>>>>>>>>>>> /* Before MMU is enabled */
>>>>>>>>>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init
>>>>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>>>>>>>>>> return PMD_SIZE;
>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> +/* called from head.S with MMU off */
>>>>>>>>>>>>>> +asmlinkage void __init __copy_data(void)
>>>>>>>>>>>>>> +{
>>>>>>>>>>>>>> + void *from = (void *)(&_sdata);
>>>>>>>>>>>>>> + void *end = (void *)(&_end);
>>>>>>>>>>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE;
>>>>>>>>>>>>>> + size_t sz = (size_t)(end - from);
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + memcpy(to, from, sz);
>>>>>>>>>>>>>> +}
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> /*
>>>>>>>>>>>>>> * setup_vm() is called from head.S with MMU-off.
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init
>>>>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa)
>>>>>>>>>>>>>> {
>>>>>>>>>>>>>> - uintptr_t va, pa, end_va;
>>>>>>>>>>>>>> + uintptr_t va, end_va;
>>>>>>>>>>>>>> + uintptr_t __maybe_unused pa;
>>>>>>>>>>>>>> uintptr_t load_pa = (uintptr_t)(&_start);
>>>>>>>>>>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
>>>>>>>>>>>>>> uintptr_t map_size;
>>>>>>>>>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>>>>>>> dtb_pa)
>>>>>>>>>>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd;
>>>>>>>>>>>>>> #endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
>>>>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>>>>>>>>>> (uintptr_t)(&_xiprom);
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE;
>>>>>>>>>>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> va_pa_offset = PAGE_OFFSET - load_pa;
>>>>>>>>>>>
>>>>>>>>>>> I should have seen this before, I was too focused on having a XIP
>>>>>>>>>>> kernel
>>>>>>>>>>> boot. I already moved the kernel mapping in the vmalloc zone: the
>>>>>>>>>>> virtual to physical translations need to be handled differently
>>>>>>>>>>> now that
>>>>>>>>>>> the kernel mapping does not lie into linear mapping anymore, we can't
>>>>>>>>>>> use va_pa_offset defined above for both mappings.
>>>>>>>>>>>
>>>>>>>>>>> I was rebasing my patchset on the XIP patch but I believe that
>>>>>>>>>>> doing the
>>>>>>>>>>> other way around would greatly simplify the XIP patch as the kernel
>>>>>>>>>>> mapping would already be moved outside the linear mapping, there
>>>>>>>>>>> would
>>>>>>>>>>> be no need to reserve a zone in vmalloc anymore (that simplifies
>>>>>>>>>>> pgtable.h quite a lot). And the XIP kernel mapping could be
>>>>>>>>>>> implemented
>>>>>>>>>>> in a new create_kernel_page_table (that would also simplify
>>>>>>>>>>> mm/init.c).
>>>>>>>>>>>
>>>>>>>>>>> I can help to do that but I don't think we should merge this patch
>>>>>>>>>>> as is
>>>>>>>>>>> now.
>>>>>>>>>>
>>>>>>>>>> I think that's the right way to go for now: it's a lot harder to test
>>>>>>>>>> the XIP stuff, as it requires a bunch of harness changes. So let's
>>>>>>>>>> take the page table refactoring in now and rebase this stuff on top of
>>>>>>>>>> it. There's really no way to do both without making more work for
>>>>>>>>>> someone, it's just a headache on timing.
>>>>>>>>>>
>>>>>>>>>> Alex: if you want to sign up to spend some time there that'd be great,
>>>>>>>>>> otherwise I will.
>>>>>>>>>
>>>>>>>>> I can take care of that, no problem.
>>>>>>>>
>>>>>>>> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at
>>>>>>>> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my
>>>>>>>> setup.
>>>>>>>>
>>>>>>>> I removed most of the pgtable.h stuff, the XIP kernel is now mapped like
>>>>>>>> any other kernel at the end of the address space, not in the vmalloc
>>>>>>>> zone as you proposed. And I fixed a few thigns along the way (pfn_base,
>>>>>>>> pfn_valid, copy_data and other stuff).
>>>>>>>>
>>>>>>>> Any comment is welcome !
>>>>>>>
>>>>>>> thanks for your efforts!
>>>>>>>
>>>>>>> I've just built your version. The build went well, but the image
>>>>>>> doesn't seem to boot for me.
>>>>>>
>>>>>> Too bad. Can you give me your config please ?
>>>>>>
>>>>>
>>>>> Apparently, as you can see below, your config works for me, at least it
>>>>> reaches userspace. Do you have traces or more info about what is wrong ?
>>>>
>>>> Console output is just the same but it stops after the following line:
>>>> [ 0.003208] Console: colour dummy device 80x25
>>>>
>>>> I did some very simplistic debugging bisecting start_kernel()
>>>> execution and I could see that setup_per_cpu_pageset() was reached
>>>> while calibrate_delay() was not.
>>>>
>>>> How (and whether) this might be related to XIP I don't know :)
>>>
>>> A short update: the system would hang in sched_clock_init() if run
>>> with 'go 21000000' command.
>>
>> The output I pasted came from a boot using 'go', I can't make 'booti'
>> work in my setup.
>>
>> And you don't have this issue with your patch right ?
>
> I don't have it with yours as well. :) However, there's a small change
> in u-boot's arch/riscv/lib/image.c that I forgot about (but sent it
> today, and you're on CC).
> Basically u-boot needs to honor force_reloc flag and not *force* the
> relocation when this flag is not set.
>
>> Can you give me any config that could allow me to reproduce this
>> (uboot/buildroot) ? And your qemu version ?
>
> Other than the small change mentioned above, u-boot and qemu are
> basically the latest git.
>
> All in all, I am quite sure now that your take on XIP is working fine.
> The issue with single-core boot under QEmu seems to be less
> reproducible on slower machines running QEmu and more reproducible on
> higher performance ones. It's not clear to me if that is a QEmu
> problem or an in-kernel race, but it's hardly a XIP problem: I was
> able to reproduce it once on a non-XIP kernel too, by copying it to
> RAM in u-boot and giving it a 'go'.
Ok then I'll post a v7 of your patch soon hoping it will go to for-next.
I'll add my SoB to yours as I modified quite a few things and I think
people need to know who to yell at, if you don't mind of course.
Thanks,
Alex
>
>
>> Thanks,
>>
>>> If I use 'booti' command it passes and goes further all the way to
>>> mounting the userspace
>>>
>>> So the problem is rather SMP related than XIP related.
>>
>>
>>
>>>
>>> Best regards,
>>> Vitaly
>>>
>>>>> Thanks!
>>>>>
>>>>> [ 0.000000] Linux version 5.12.0-rc2 (alex@debian)
>>>>> (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.11.2) 9.3.0,
>>>>> GNU ld (GNU Binutils) 2.34) #322 SMP Sat Apr 3 05:50:18 EDT 2021
>>>>> [ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit
>>>>> [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
>>>>> [ 0.000000] printk: bootconsole [sbi0] enabled
>>>>> [ 0.000000] Zone ranges:
>>>>> [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff]
>>>>> [ 0.000000] Normal empty
>>>>> [ 0.000000] Movable zone start for each node
>>>>> [ 0.000000] Early memory node ranges
>>>>> [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff]
>>>>> [ 0.000000] Initmem setup node 0 [mem
>>>>> 0x0000000080000000-0x00000000bfffffff]
>>>>> [ 0.000000] On node 0 totalpages: 262144
>>>>> [ 0.000000] DMA32 zone: 3584 pages used for memmap
>>>>> [ 0.000000] DMA32 zone: 0 pages reserved
>>>>> [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
>>>>> [ 0.000000] SBI specification v0.2 detected
>>>>> [ 0.000000] SBI implementation ID=0x1 Version=0x6
>>>>> [ 0.000000] SBI v0.2 TIME extension detected
>>>>> [ 0.000000] SBI v0.2 IPI extension detected
>>>>> [ 0.000000] SBI v0.2 RFENCE extension detected
>>>>> [ 0.000000] software IO TLB: mapped [mem
>>>>> 0x00000000b9e00000-0x00000000bde00000] (64MB)
>>>>> [ 0.000000] CPU with hartid=0 is not available
>>>>> [ 0.000000] CPU with hartid=0 is not available
>>>>> [ 0.000000] riscv: ISA extensions acdfim
>>>>> [ 0.000000] riscv: ELF capabilities acdfim
>>>>> [ 0.000000] percpu: Embedded 17 pages/cpu s29856 r8192 d31584 u69632
>>>>> [ 0.000000] pcpu-alloc: s29856 r8192 d31584 u69632 alloc=17*4096
>>>>> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
>>>>> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258560
>>>>> [ 0.000000] Kernel command line: earlyprintk debug earlycon=sbi
>>>>> console=ttyS0,115200n8 root=/dev/ram0 init=/sbin/init
>>>>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 8,
>>>>> 1048576 bytes, linear)
>>>>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288
>>>>> bytes, linear)
>>>>> [ 0.000000] Sorting __ex_table...
>>>>> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
>>>>> [ 0.000000] Memory: 947732K/1048576K available (2999K kernel code,
>>>>> 692K rwdata, 953K rodata, 205K init, 247K bss, 100844K reserved, 0K
>>>>> cma-reserved)
>>>>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>>>> [ 0.000000] rcu: Hierarchical RCU implementation.
>>>>> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
>>>>> [ 0.000000] rcu: RCU debug extended QS entry/exit.
>>>>> [ 0.000000] Tracing variant of Tasks RCU enabled.
>>>>> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
>>>>> is 25 jiffies.
>>>>> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>>>>> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
>>>>> [ 0.000000] CPU with hartid=0 is not available
>>>>> [ 0.000000] riscv-intc: unable to find hart id for
>>>>> /cpus/cpu@0/interrupt-controller
>>>>> [ 0.000000] riscv-intc: 64 local interrupts mapped
>>>>> [ 0.000000] plic: interrupt-controller@c000000: mapped 186 interrupts
>>>>> with 4 handlers for 9 contexts.
>>>>> [ 0.000000] random: get_random_bytes called from
>>>>> start_kernel+0x2fe/0x49c with crng_init=0
>>>>> [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0]
>>>>> hartid [1]
>>>>> [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff
>>>>> max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
>>>>> [ 0.000146] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps
>>>>> every 2199023255500ns
>>>>> [ 0.006056] Console: colour dummy device 80x25
>>>>> [ 0.015242] Calibrating delay loop (skipped), value calculated using
>>>>> timer frequency.. 2.00 BogoMIPS (lpj=4000)
>>>>> [ 0.017130] pid_max: default: 32768 minimum: 301
>>>>> [ 0.020115] Mount-cache hash table entries: 2048 (order: 2, 16384
>>>>> bytes, linear)
>>>>> [ 0.021097] Mountpoint-cache hash table entries: 2048 (order: 2,
>>>>> 16384 bytes, linear)
>>>>> [ 0.078755] ASID allocator using 16 bits (65536 entries)
>>>>> [ 0.083669] rcu: Hierarchical SRCU implementation.
>>>>> [ 0.093304] smp: Bringing up secondary CPUs ...
>>>>> [ 1.149900] CPU1: failed to come online
>>>>> [ 2.204183] CPU2: failed to come online
>>>>> [ 3.256211] CPU3: failed to come online
>>>>> [ 3.257043] smp: Brought up 1 node, 1 CPU
>>>>> [ 3.269554] devtmpfs: initialized
>>>>> [ 3.282015] clocksource: jiffies: mask: 0xffffffff max_cycles:
>>>>> 0xffffffff, max_idle_ns: 7645041785100000 ns
>>>>> [ 3.283484] futex hash table entries: 1024 (order: 4, 65536 bytes,
>>>>> linear)
>>>>> [ 3.381718] SCSI subsystem initialized
>>>>> [ 3.385115] clocksource: Switched to clocksource riscv_clocksource
>>>>> [ 3.602198] workingset: timestamp_bits=62 max_order=18 bucket_order=0
>>>>> [ 3.624182] Block layer SCSI generic (bsg) driver version 0.4 loaded
>>>>> (major 253)
>>>>> [ 3.625988] io scheduler mq-deadline registered
>>>>> [ 3.626725] io scheduler kyber registered
>>>>> [ 3.629047] start plist test
>>>>> [ 3.641420] end plist test
>>>>> [ 3.717639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>>>>> [ 3.752315] brd: module loaded
>>>>> [ 3.790207] loop: module loaded
>>>>> [ 3.793943] mousedev: PS/2 mouse device common for all mice
>>>>> [ 3.810511] Warning: unable to open an initial console.
>>>>> [ 3.811923] Freeing unused kernel memory: 88K
>>>>> [ 3.812558] This architecture does not have kernel memory protection.
>>>>> [ 3.814280] Run /init as init process
>>>>> [ 3.814808] with arguments:
>>>>> [ 3.815227] /init
>>>>> [ 3.815539] with environment:
>>>>> [ 3.815924] HOME=/
>>>>> [ 3.816250] TERM=linux
>>>>> [ 4.398678] random: dd: uninitialized urandom read (512 bytes read)
>>>>>
>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Alex
>>>>>>
>>>>>>> I'll take a look at the code later today.
>>>>>>>
>>>>>>> Best regards,
>>>>>>> Vitaly
>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> Alex
>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Either way, can you point me (either just indicate the old version is
>>>>>>>>>> OK or send a new one) to what you want me to look at WRT the page
>>>>>>>>>> table code? IIRC it looked pretty much fine, but I'll take another
>>>>>>>>>> look ASAP so we can avoid serializing everything.
>>>>>>>>>
>>>>>>>>> The v3 is fine for me:
>>>>>>>>> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Alex
>>>>>>>>>>>
>>>>>>>>>>>>>> pfn_base = PFN_DOWN(load_pa);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>>>>>>> dtb_pa)
>>>>>>>>>>>>>> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
>>>>>>>>>>>>>> #endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
>>>>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
>>>>>>>>>>>>>> PAGE_TABLE);
>>>>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
>>>>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>>>>>>>>>> + va += PMD_SIZE) {
>>>>>>>>>>>>>> + create_pmd_mapping(xip_pmd, va,
>>>>>>>>>>>>>> + xiprom + (va -
>>>>>>>>>>>>>> XIP_VIRT_ADDR_START),
>>>>>>>>>>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC);
>>>>>>>>>>>>>> + }
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
>>>>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE,
>>>>>>>>>>>>>> PAGE_TABLE);
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> /*
>>>>>>>>>>>>>> * Setup early PGD covering entire kernel which will
>>>>>>>>>>>>>> allows
>>>>>>>>>>>>>> * us to reach paging_init(). We map all memory banks
>>>>>>>>>>>>>> later
>>>>>>>>>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>>>>>>> dtb_pa)
>>>>>>>>>>>>>> pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
>>>>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>>>>>>>>>> (PMD_SIZE - 1));
>>>>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
>>>>>>>>>>>>>> - dtb_early_va = __va(dtb_pa);
>>>>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
>>>>>>>>>>>>>> #else
>>>>>>>>>>>>>> #ifndef CONFIG_BUILTIN_DTB
>>>>>>>>>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t
>>>>>>>>>>>>>> dtb_pa)
>>>>>>>>>>>>>> pa + PGDIR_SIZE, PGDIR_SIZE,
>>>>>>>>>>>>>> PAGE_KERNEL);
>>>>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa &
>>>>>>>>>>>>>> (PGDIR_SIZE - 1));
>>>>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */
>>>>>>>>>>>>>> - dtb_early_va = __va(dtb_pa);
>>>>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa));
>>>>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */
>>>>>>>>>>>>>> #endif
>>>>>>>>>>>>>> dtb_early_pa = dtb_pa;
>>>>>>>>>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void)
>>>>>>>>>>>>>> uintptr_t va, map_size;
>>>>>>>>>>>>>> phys_addr_t pa, start, end;
>>>>>>>>>>>>>> u64 i;
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) -
>>>>>>>>>>>>>> (uintptr_t)(&_xiprom);
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> /**
>>>>>>>>>>>>>> * MMU is enabled at this point. But page table setup is
>>>>>>>>>>>>>> not complete yet.
>>>>>>>>>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void)
>>>>>>>>>>>>>> map_size,
>>>>>>>>>>>>>> PAGE_KERNEL_EXEC);
>>>>>>>>>>>>>> }
>>>>>>>>>>>>>> }
>>>>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL
>>>>>>>>>>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz);
>>>>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START;
>>>>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz;
>>>>>>>>>>>>>> + va += map_size)
>>>>>>>>>>>>>> + create_pgd_mapping(swapper_pg_dir, va,
>>>>>>>>>>>>>> + CONFIG_XIP_PHYS_ADDR + (va -
>>>>>>>>>>>>>> XIP_VIRT_ADDR_START),
>>>>>>>>>>>>>> + map_size, PAGE_KERNEL_EXEC);
>>>>>>>>>>>>>> +
>>>>>>>>>>>>>> +#endif
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> /* Clear fixmap PTE and PMD mappings */
>>>>>>>>>>>>>> clear_fixmap(FIX_PTE);
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> linux-riscv mailing list
>>>>>>>>>>>> [email protected]
>>>>>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> linux-riscv mailing list
>>>>>>>>>> [email protected]
>>>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> linux-riscv mailing list
>>>>>>>>> [email protected]
>>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> linux-riscv mailing list
>>>>>>> [email protected]
>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>>>>>
>>>
>>> _______________________________________________
>>> linux-riscv mailing list
>>> [email protected]
>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
Hi Alex,
<snip>
> > All in all, I am quite sure now that your take on XIP is working fine.
> > The issue with single-core boot under QEmu seems to be less
> > reproducible on slower machines running QEmu and more reproducible on
> > higher performance ones. It's not clear to me if that is a QEmu
> > problem or an in-kernel race, but it's hardly a XIP problem: I was
> > able to reproduce it once on a non-XIP kernel too, by copying it to
> > RAM in u-boot and giving it a 'go'.
>
> Ok then I'll post a v7 of your patch soon hoping it will go to for-next.
> I'll add my SoB to yours as I modified quite a few things and I thin
> people need to know who to yell at, if you don't mind of course.
No, absolutely not. :) Thanks for digging into this!
Best regards,
Vitaly