From: Frank Wunderlich <[email protected]>
To store uncompressed bl2 more space is required than partition is
actually defined.
Signed-off-by: Frank Wunderlich <[email protected]>
---
I used the definition i got from mtk used in their SDK uboot.
Openwrt uses also the first reserved partition to give bl2 more
space:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-nor.dts;h=f597b869abc80d1a73f44ebb85ad4da17376bb52;hb=HEAD#l22
so imho it should be same in mainline to not require complex bl2
compression.
---
.../boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
index 84aa229e80f3..e48881be4ed6 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
@@ -27,15 +27,10 @@ partitions {
partition@0 {
label = "bl2";
- reg = <0x0 0x20000>;
+ reg = <0x0 0x40000>;
read-only;
};
- partition@20000 {
- label = "reserved";
- reg = <0x20000 0x20000>;
- };
-
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x40000>;
--
2.34.1
Il 03/04/23 12:58, Frank Wunderlich ha scritto:
> From: Frank Wunderlich <[email protected]>
>
> To store uncompressed bl2 more space is required than partition is
> actually defined.
>
> Signed-off-by: Frank Wunderlich <[email protected]>
If this doesn't get changed anymore, I'm fine with it... but a question arises:
did you send patches to add your BPI-r3 board(s) to upstream u-boot?
> ---
> I used the definition i got from mtk used in their SDK uboot.
>
> Openwrt uses also the first reserved partition to give bl2 more
> space:
>
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-nor.dts;h=f597b869abc80d1a73f44ebb85ad4da17376bb52;hb=HEAD#l22
>
> so imho it should be same in mainline to not require complex bl2
> compression.
Regards,
Angelo
> Gesendet: Montag, 03. April 2023 um 14:43 Uhr
> Von: "AngeloGioacchino Del Regno" <[email protected]>
> Il 03/04/23 12:58, Frank Wunderlich ha scritto:
> > From: Frank Wunderlich <[email protected]>
> >
> > To store uncompressed bl2 more space is required than partition is
> > actually defined.
> >
> > Signed-off-by: Frank Wunderlich <[email protected]>
>
> If this doesn't get changed anymore, I'm fine with it... but a question arises:
> did you send patches to add your BPI-r3 board(s) to upstream u-boot?
currently i use the rfb dts for r3 in uboot: arch/arm/dts/mt7986a-sd-rfb.dts
this file in upstream uboot has no partitions defined
https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/mt7986a-sd-rfb.dts#L144
but i added them there too and i wrote content by offsets to main device (not to partitions).
https://github.com/frank-w/u-boot/blob/2023-04-bpi/arch/arm/dts/mt7986a-sd-rfb.dts#L154
so yes basicly it needs to be send there too, maybe as additional dts.
regards Frank
> > ---
> > I used the definition i got from mtk used in their SDK uboot.
> >
> > Openwrt uses also the first reserved partition to give bl2 more
> > space:
> >
> > https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-nor.dts;h=f597b869abc80d1a73f44ebb85ad4da17376bb52;hb=HEAD#l22
> >
> > so imho it should be same in mainline to not require complex bl2
> > compression.
>
> Regards,
> Angelo
>
>
Il 03/04/23 15:56, Frank Wunderlich ha scritto:
>> Gesendet: Montag, 03. April 2023 um 14:43 Uhr
>> Von: "AngeloGioacchino Del Regno" <[email protected]>
>> Il 03/04/23 12:58, Frank Wunderlich ha scritto:
>>> From: Frank Wunderlich <[email protected]>
>>>
>>> To store uncompressed bl2 more space is required than partition is
>>> actually defined.
>>>
>>> Signed-off-by: Frank Wunderlich <[email protected]>
>>
>> If this doesn't get changed anymore, I'm fine with it... but a question arises:
>> did you send patches to add your BPI-r3 board(s) to upstream u-boot?
>
> currently i use the rfb dts for r3 in uboot: arch/arm/dts/mt7986a-sd-rfb.dts
>
> this file in upstream uboot has no partitions defined
>
> https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/mt7986a-sd-rfb.dts#L144
>
> but i added them there too and i wrote content by offsets to main device (not to partitions).
>
> https://github.com/frank-w/u-boot/blob/2023-04-bpi/arch/arm/dts/mt7986a-sd-rfb.dts#L154
>
> so yes basicly it needs to be send there too, maybe as additional dts.
>
I strongly encourage you to send this change to u-boot as well as changing the
kernel devicetree... and when you do, you can add a reference to the list and/or
commit @ u-boot on the commit that you'll send here for the kernel... but there's
another question...
...what happens if you run the kernel on a device with an older partition layout?
Does anything break?
I don't think that anything does, since this is read-only anyway, but just to be
sure... :-)
Besides, you have to fix the commit description, but you knew that already.
P.S.: When you post a RFC, giving it the right commit title helps sometimes! :-P
Regards,
Angelo
> Gesendet: Montag, 03. April 2023 um 16:04 Uhr
> Von: "AngeloGioacchino Del Regno" <[email protected]>
> An: "Frank Wunderlich" <[email protected]>
> Cc: "Frank Wunderlich" <[email protected]>, [email protected], "Rob Herring" <[email protected]>, "Krzysztof Kozlowski" <[email protected]>, "Matthias Brugger" <[email protected]>, [email protected], [email protected], [email protected]
> Betreff: Re: Aw: Re: [RFC] arm64: dts: use size of reserved partition for bl2
>
> Il 03/04/23 15:56, Frank Wunderlich ha scritto:
> >> Gesendet: Montag, 03. April 2023 um 14:43 Uhr
> >> Von: "AngeloGioacchino Del Regno" <[email protected]>
> >> Il 03/04/23 12:58, Frank Wunderlich ha scritto:
> >>> From: Frank Wunderlich <[email protected]>
> >>>
> >>> To store uncompressed bl2 more space is required than partition is
> >>> actually defined.
> >>>
> >>> Signed-off-by: Frank Wunderlich <[email protected]>
> >>
> >> If this doesn't get changed anymore, I'm fine with it... but a question arises:
> >> did you send patches to add your BPI-r3 board(s) to upstream u-boot?
> >
> > currently i use the rfb dts for r3 in uboot: arch/arm/dts/mt7986a-sd-rfb.dts
> >
> > this file in upstream uboot has no partitions defined
> >
> > https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/mt7986a-sd-rfb.dts#L144
> >
> > but i added them there too and i wrote content by offsets to main device (not to partitions).
> >
> > https://github.com/frank-w/u-boot/blob/2023-04-bpi/arch/arm/dts/mt7986a-sd-rfb.dts#L154
> >
> > so yes basicly it needs to be send there too, maybe as additional dts.
> >
>
> I strongly encourage you to send this change to u-boot as well as changing the
> kernel devicetree... and when you do, you can add a reference to the list and/or
> commit @ u-boot on the commit that you'll send here for the kernel... but there's
> another question...
imho uboot needs an own dts for the board (copy from rfb) for this because of another change
(tick_dly) and i have no rfb for testing.
> ...what happens if you run the kernel on a device with an older partition layout?
> Does anything break?
> I don't think that anything does, since this is read-only anyway, but just to be
> sure... :-)
i have no information about the second partition from the old layout...it was only named reserved.
as openwrt also uses 0x40000 it should be save to use this value here.
if the bl2 does not fit into the bl2-partition (cut off), board simply does not boot,
thats why i want to increase it now. my current bl2 is 197K for nor and i had this problem.
> Besides, you have to fix the commit description, but you knew that already.
sorry missed the mt7986: part in title, or did you mean another part?
i put the additional information below --- to not be visible when patch will be applied.
> P.S.: When you post a RFC, giving it the right commit title helps sometimes! :-P
yes, missed the mt7986-part here, just wanted to hear comments first if thisis the right way