The bnx2fc_destroy functions are removing the interface before calling
destroy_work. This results multiple WARNings from sysfs_remove_group
as the controller rport device attributes are removed to early.
Replace the fcoe_port's destroy_work queue. It's not needed.
The problem is easily reproducible with the following steps.
Example:
$ dmesg -w &
$ systemctl enable --now fcoe
$ fipvlan -s -c ens2f1
$ fcoeadm -d ens2f1.802
[ 583.464488] host2: libfc: Link down on port (7500a1)
[ 583.472651] bnx2fc: 7500a1 - rport not created Yet!!
[ 583.490468] ------------[ cut here ]------------
[ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0'
[ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80
[ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ...
[ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1
[ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013
[ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc]
[ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80
[ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ...
[ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282
[ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000
[ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0
[ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00
[ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400
[ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004
[ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000
[ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0
[ 584.454888] Call Trace:
[ 584.466108] device_del+0xb2/0x3e0
[ 584.481701] device_unregister+0x13/0x60
[ 584.501306] bsg_unregister_queue+0x5b/0x80
[ 584.522029] bsg_remove_queue+0x1c/0x40
[ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc]
[ 584.573823] process_one_work+0x1e3/0x3b0
[ 584.592396] worker_thread+0x50/0x3b0
[ 584.609256] ? rescuer_thread+0x370/0x370
[ 584.628877] kthread+0x149/0x170
[ 584.643673] ? set_kthread_struct+0x40/0x40
[ 584.662909] ret_from_fork+0x22/0x30
[ 584.680002] ---[ end trace 53575ecefa942ece ]---
Fixes: 0cbf32e1681d ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks")
Tested-by: Guangwu Zhang <[email protected]>
Signed-off-by: John Meneghini <[email protected]>
Signed-off-by: Maurizio Lombardi <[email protected]>
---
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 20 +++++---------------
1 file changed, 5 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 71fa62bd3083..9be273c320e2 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -82,7 +82,7 @@ static int bnx2fc_bind_pcidev(struct bnx2fc_hba *hba);
static void bnx2fc_unbind_pcidev(struct bnx2fc_hba *hba);
static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
struct device *parent, int npiv);
-static void bnx2fc_destroy_work(struct work_struct *work);
+static void bnx2fc_port_destroy(struct fcoe_port *port);
static struct bnx2fc_hba *bnx2fc_hba_lookup(struct net_device *phys_dev);
static struct bnx2fc_interface *bnx2fc_interface_lookup(struct net_device
@@ -907,9 +907,6 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
__bnx2fc_destroy(interface);
}
mutex_unlock(&bnx2fc_dev_lock);
-
- /* Ensure ALL destroy work has been completed before return */
- flush_workqueue(bnx2fc_wq);
return;
default:
@@ -1215,8 +1212,8 @@ static int bnx2fc_vport_destroy(struct fc_vport *vport)
mutex_unlock(&n_port->lp_mutex);
bnx2fc_free_vport(interface->hba, port->lport);
bnx2fc_port_shutdown(port->lport);
+ bnx2fc_port_destroy(port);
bnx2fc_interface_put(interface);
- queue_work(bnx2fc_wq, &port->destroy_work);
return 0;
}
@@ -1525,7 +1522,6 @@ static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
port->lport = lport;
port->priv = interface;
port->get_netdev = bnx2fc_netdev;
- INIT_WORK(&port->destroy_work, bnx2fc_destroy_work);
/* Configure fcoe_port */
rc = bnx2fc_lport_config(lport);
@@ -1653,8 +1649,8 @@ static void __bnx2fc_destroy(struct bnx2fc_interface *interface)
bnx2fc_interface_cleanup(interface);
bnx2fc_stop(interface);
list_del(&interface->list);
+ bnx2fc_port_destroy(port);
bnx2fc_interface_put(interface);
- queue_work(bnx2fc_wq, &port->destroy_work);
}
/**
@@ -1694,15 +1690,12 @@ static int bnx2fc_destroy(struct net_device *netdev)
return rc;
}
-static void bnx2fc_destroy_work(struct work_struct *work)
+static void bnx2fc_port_destroy(struct fcoe_port *port)
{
- struct fcoe_port *port;
struct fc_lport *lport;
- port = container_of(work, struct fcoe_port, destroy_work);
lport = port->lport;
-
- BNX2FC_HBA_DBG(lport, "Entered bnx2fc_destroy_work\n");
+ BNX2FC_HBA_DBG(lport, "Entered %s, destroying lport %p\n", __func__, lport);
bnx2fc_if_destroy(lport);
}
@@ -2556,9 +2549,6 @@ static void bnx2fc_ulp_exit(struct cnic_dev *dev)
__bnx2fc_destroy(interface);
mutex_unlock(&bnx2fc_dev_lock);
- /* Ensure ALL destroy work has been completed before return */
- flush_workqueue(bnx2fc_wq);
-
bnx2fc_ulp_stop(hba);
/* unregister cnic device */
if (test_and_clear_bit(BNX2FC_CNIC_REGISTERED, &hba->reg_with_cnic))
--
2.27.0
John,
> The bnx2fc_destroy functions are removing the interface before calling
> destroy_work. This results multiple WARNings from sysfs_remove_group
> as the controller rport device attributes are removed to early.
>
> Replace the fcoe_port's destroy_work queue. It's not needed.
Applied to 5.17/scsi-staging, thanks!
--
Martin K. Petersen Oracle Linux Engineering
On Fri, 14 Jan 2022 23:00:44 -0500, John Meneghini wrote:
> The bnx2fc_destroy functions are removing the interface before calling
> destroy_work. This results multiple WARNings from sysfs_remove_group
> as the controller rport device attributes are removed to early.
>
> Replace the fcoe_port's destroy_work queue. It's not needed.
>
> The problem is easily reproducible with the following steps.
>
> [...]
Applied to 5.17/scsi-fixes, thanks!
[1/1] scsi: bnx2fc: flush destroy_work queue before calling bnx2fc_interface_put
https://git.kernel.org/mkp/scsi/c/847f9ea4c518
--
Martin K. Petersen Oracle Linux Engineering