------- Original Message -------
On Wednesday, April 20th, 2022 at 00:08, Guenter Roeck <[email protected]> wrote:
>
>
> On 4/19/22 14:52, Adam Wujek wrote:
>
> > Some devices returns a wrong value in PMBUS_CAPABILITY register.
> > Allow the use of read_byte_data function defined in a driver for
> > a specific device.
>
>
> Those devices should set PMBUS_NO_CAPABILITY.
>
> Guenter
Yes, you're correct. I was working with the older kernel. Please ignore this patch.
Adam
>
> > Signed-off-by: Adam Wujek [email protected]
> > ---
> > drivers/hwmon/pmbus/pmbus_core.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> > index f8ca36759b0a..ef9989be8f89 100644
> > --- a/drivers/hwmon/pmbus/pmbus_core.c
> > +++ b/drivers/hwmon/pmbus/pmbus_core.c
> > @@ -2011,7 +2011,7 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
> > }
> >
> > /* Enable PEC if the controller supports it */
> > - ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
> > + ret = _pmbus_read_byte_data(client, -1, PMBUS_CAPABILITY);
> > if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
> > client->flags |= I2C_CLIENT_PEC;
> > else
> > --
> > 2.17.1