Hi,
Here is the second round of the OMAP SSI driver patches.
In this round I added/fixed:
- Usage of runtime PM
Previously runtime PM was only used to enable/disable the involved
clocks. Now the driver makes use of resume/suspend callbacks, which
simplified its code (the driver did its own reference counting).
- Removal of deprecated IRQF_DISABLED flag from irq requests
- HWMOD: set SSI parent to L4-Core instead of L3
I checked the public OMAP3 TRM, which assigns the address space used
by the driver as reserved L4-Core address space.
- HWMOD: removed data, which will be specified via Device Tree
- Change omap_ssi_port.wktest and omap_ssi_port.wkin_cken from
"unsigned int" to "bool"
- Change omap_ssi_port.wk_refcount from "int" to "unsigned int"
- Convert __raw_read* to read*_relaxed / write*_relaxed
- Removal of involved platform and board code
- Split driver into omap_ssi.c and omap_ssi_port.c
This changes helps in making the DT interface cleaner.
- Creation & Documentation of DT bindings
TODO:
- Central Message Queue
I did not yet implement a central message queue in the HSI framework.
I would prefer to do this after SSI is working in the mainline kernel,
since that makes testing easier.
- HSI client registration via DT
This needs changes in the HSI framework, which currently assumes,
that clients are registered via board support code. This is more
or less independent of the controller and should be added in an
independent patchset IMHO.
Version 1 (*) of the patchset: https://lkml.org/lkml/2013/8/11/67
(*) There have been patchsets send out by Carlos before my RFCv1,
see RFCv1 for details.
-- Sebastian
Sebastian Reichel (3):
ARM: OMAP2+: hwmod-data: Add SSI information
ARM: OMAP2+: HSI: Introduce OMAP SSI driver
ARM: dts: N900: Add SSI information
Documentation/devicetree/bindings/hsi/omap_ssi.txt | 73 ++
arch/arm/boot/dts/omap3-n900.dts | 8 +
arch/arm/boot/dts/omap34xx.dtsi | 49 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 48 +
drivers/hsi/Kconfig | 1 +
drivers/hsi/Makefile | 1 +
drivers/hsi/controllers/Kconfig | 20 +
drivers/hsi/controllers/Makefile | 6 +
drivers/hsi/controllers/omap_ssi.c | 585 +++++++++
drivers/hsi/controllers/omap_ssi.h | 167 +++
drivers/hsi/controllers/omap_ssi_port.c | 1346 ++++++++++++++++++++
drivers/hsi/controllers/omap_ssi_regs.h | 172 +++
12 files changed, 2476 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt
create mode 100644 drivers/hsi/controllers/Kconfig
create mode 100644 drivers/hsi/controllers/Makefile
create mode 100644 drivers/hsi/controllers/omap_ssi.c
create mode 100644 drivers/hsi/controllers/omap_ssi.h
create mode 100644 drivers/hsi/controllers/omap_ssi_port.c
create mode 100644 drivers/hsi/controllers/omap_ssi_regs.h
--
1.8.4.rc3
This patch adds Synchronous Serial Interface (SSI) hwmod support for
OMAP34xx SoCs.
Signed-off-by: Sebastian Reichel <[email protected]>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 48 ++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 0c3a427..9e56fab 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3693,6 +3693,53 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/*
+ * 'ssi' class
+ * synchronous serial interface (multichannel and full-duplex serial if)
+ */
+
+static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
+ SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+ MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
+ .name = "ssi",
+ .sysc = &omap34xx_ssi_sysc,
+};
+
+static struct omap_hwmod omap34xx_ssi_hwmod = {
+ .name = "ssi",
+ .class = &omap34xx_ssi_hwmod_class,
+ .clkdm_name = "core_l4_clkdm",
+ .main_clk = "ssi_ssr_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_SSI_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT,
+ },
+ },
+};
+
+/* L4 CORE -> SSI */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap34xx_ssi_hwmod,
+ .clk = "ssi_ick",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l3_main__l4_core,
&omap3xxx_l3_main__l4_per,
@@ -3818,6 +3865,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
#ifdef CONFIG_OMAP_IOMMU_IVA2
&omap3xxx_l3_main__mmu_iva,
#endif
+ &omap34xx_l4_core__ssi,
NULL
};
--
1.8.4.rc3
This patch adds an OMAP SSI driver to the HSI framework.
The Synchronous Serial Interface (SSI) is a legacy version
of HSI. As in the case of HSI, it is mainly used to connect
Application engines (APE) with cellular modem engines (CMT)
in cellular handsets.
It provides a multichannel, full-duplex, multi-core communication
with no reference clock. The OMAP SSI block is capable of reaching
speeds of 110 Mbit/s.
Signed-off-by: Sebastian Reichel <[email protected]>
---
drivers/hsi/Kconfig | 1 +
drivers/hsi/Makefile | 1 +
drivers/hsi/controllers/Kconfig | 20 +
drivers/hsi/controllers/Makefile | 6 +
drivers/hsi/controllers/omap_ssi.c | 585 ++++++++++++++
drivers/hsi/controllers/omap_ssi.h | 167 ++++
drivers/hsi/controllers/omap_ssi_port.c | 1346 +++++++++++++++++++++++++++++++
drivers/hsi/controllers/omap_ssi_regs.h | 172 ++++
8 files changed, 2298 insertions(+)
create mode 100644 drivers/hsi/controllers/Kconfig
create mode 100644 drivers/hsi/controllers/Makefile
create mode 100644 drivers/hsi/controllers/omap_ssi.c
create mode 100644 drivers/hsi/controllers/omap_ssi.h
create mode 100644 drivers/hsi/controllers/omap_ssi_port.c
create mode 100644 drivers/hsi/controllers/omap_ssi_regs.h
diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig
index d94e38d..2c76de4 100644
--- a/drivers/hsi/Kconfig
+++ b/drivers/hsi/Kconfig
@@ -14,6 +14,7 @@ config HSI_BOARDINFO
bool
default y
+source "drivers/hsi/controllers/Kconfig"
source "drivers/hsi/clients/Kconfig"
endif # HSI
diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile
index 9d5d33f..360371e 100644
--- a/drivers/hsi/Makefile
+++ b/drivers/hsi/Makefile
@@ -3,4 +3,5 @@
#
obj-$(CONFIG_HSI_BOARDINFO) += hsi_boardinfo.o
obj-$(CONFIG_HSI) += hsi.o
+obj-y += controllers/
obj-y += clients/
diff --git a/drivers/hsi/controllers/Kconfig b/drivers/hsi/controllers/Kconfig
new file mode 100644
index 0000000..e568e38
--- /dev/null
+++ b/drivers/hsi/controllers/Kconfig
@@ -0,0 +1,20 @@
+#
+# HSI controllers configuration
+#
+comment "HSI controllers"
+
+config OMAP_SSI
+ tristate "OMAP SSI hardware driver"
+ depends on ARCH_OMAP && HSI
+ default n
+ ---help---
+ SSI is a legacy version of HSI. It is usually used to connect
+ an application engine with a cellular modem.
+ If you say Y here, you will enable the OMAP SSI hardware driver.
+
+ If unsure, say N.
+
+config OMAP_SSI_PORT
+ tristate
+ default m if OMAP_SSI=m
+ default y if OMAP_SSI=y
diff --git a/drivers/hsi/controllers/Makefile b/drivers/hsi/controllers/Makefile
new file mode 100644
index 0000000..d2665cf
--- /dev/null
+++ b/drivers/hsi/controllers/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for HSI controllers drivers
+#
+
+obj-$(CONFIG_OMAP_SSI) += omap_ssi.o
+obj-$(CONFIG_OMAP_SSI_PORT) += omap_ssi_port.o
diff --git a/drivers/hsi/controllers/omap_ssi.c b/drivers/hsi/controllers/omap_ssi.c
new file mode 100644
index 0000000..0714b50
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi.c
@@ -0,0 +1,585 @@
+/* OMAP SSI driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2013 Sebastian Reichel
+ *
+ * Contact: Carlos Chinea <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/omap-dma.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_platform.h>
+#include <linux/hsi/hsi.h>
+
+#include "omap_ssi_regs.h"
+#include "omap_ssi.h"
+
+/* TODO: HACK: define omap_pm_get_dev_context_loss_count, because it is defined
+ * in arch/arm/mach-omap2/omap-pm.h and thus not available via #include */
+int omap_pm_get_dev_context_loss_count(struct device *dev);
+
+#ifdef CONFIG_DEBUG_FS
+static int ssi_debug_show(struct seq_file *m, void *p __maybe_unused)
+{
+ struct hsi_controller *ssi = m->private;
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ void __iomem *sys = omap_ssi->sys;
+
+ pm_runtime_get_sync(ssi->device.parent);
+ seq_printf(m, "REVISION\t: 0x%08x\n", readl(sys + SSI_REVISION_REG));
+ seq_printf(m, "SYSCONFIG\t: 0x%08x\n", readl(sys + SSI_SYSCONFIG_REG));
+ seq_printf(m, "SYSSTATUS\t: 0x%08x\n", readl(sys + SSI_SYSSTATUS_REG));
+ pm_runtime_put_sync(ssi->device.parent);
+
+ return 0;
+}
+
+static int ssi_debug_gdd_show(struct seq_file *m, void *p __maybe_unused)
+{
+ struct hsi_controller *ssi = m->private;
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ void __iomem *gdd = omap_ssi->gdd;
+ void __iomem *sys = omap_ssi->sys;
+ int lch;
+
+ pm_runtime_get_sync(ssi->device.parent);
+
+ seq_printf(m, "GDD_MPU_STATUS\t: 0x%08x\n",
+ readl(sys + SSI_GDD_MPU_IRQ_STATUS_REG));
+ seq_printf(m, "GDD_MPU_ENABLE\t: 0x%08x\n\n",
+ readl(sys + SSI_GDD_MPU_IRQ_ENABLE_REG));
+ seq_printf(m, "HW_ID\t\t: 0x%08x\n",
+ readl(gdd + SSI_GDD_HW_ID_REG));
+ seq_printf(m, "PPORT_ID\t: 0x%08x\n",
+ readl(gdd + SSI_GDD_PPORT_ID_REG));
+ seq_printf(m, "MPORT_ID\t: 0x%08x\n",
+ readl(gdd + SSI_GDD_MPORT_ID_REG));
+ seq_printf(m, "TEST\t\t: 0x%08x\n",
+ readl(gdd + SSI_GDD_TEST_REG));
+ seq_printf(m, "GCR\t\t: 0x%08x\n",
+ readl(gdd + SSI_GDD_GCR_REG));
+
+ for (lch = 0; lch < SSI_MAX_GDD_LCH; lch++) {
+ seq_printf(m, "\nGDD LCH %d\n=========\n", lch);
+ seq_printf(m, "CSDP\t\t: 0x%04x\n",
+ readw(gdd + SSI_GDD_CSDP_REG(lch)));
+ seq_printf(m, "CCR\t\t: 0x%04x\n",
+ readw(gdd + SSI_GDD_CCR_REG(lch)));
+ seq_printf(m, "CICR\t\t: 0x%04x\n",
+ readw(gdd + SSI_GDD_CICR_REG(lch)));
+ seq_printf(m, "CSR\t\t: 0x%04x\n",
+ readw(gdd + SSI_GDD_CSR_REG(lch)));
+ seq_printf(m, "CSSA\t\t: 0x%08x\n",
+ readl(gdd + SSI_GDD_CSSA_REG(lch)));
+ seq_printf(m, "CDSA\t\t: 0x%08x\n",
+ readl(gdd + SSI_GDD_CDSA_REG(lch)));
+ seq_printf(m, "CEN\t\t: 0x%04x\n",
+ readw(gdd + SSI_GDD_CEN_REG(lch)));
+ seq_printf(m, "CSAC\t\t: 0x%04x\n",
+ readw(gdd + SSI_GDD_CSAC_REG(lch)));
+ seq_printf(m, "CDAC\t\t: 0x%04x\n",
+ readw(gdd + SSI_GDD_CDAC_REG(lch)));
+ seq_printf(m, "CLNK_CTRL\t: 0x%04x\n",
+ readw(gdd + SSI_GDD_CLNK_CTRL_REG(lch)));
+ }
+
+ pm_runtime_put_sync(ssi->device.parent);
+
+ return 0;
+}
+
+static int ssi_regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ssi_debug_show, inode->i_private);
+}
+
+static int ssi_gdd_regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ssi_debug_gdd_show, inode->i_private);
+}
+
+static const struct file_operations ssi_regs_fops = {
+ .open = ssi_regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const struct file_operations ssi_gdd_regs_fops = {
+ .open = ssi_gdd_regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init ssi_debug_add_ctrl(struct hsi_controller *ssi)
+{
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ struct dentry *dir;
+
+ /* SSI controller */
+ omap_ssi->dir = debugfs_create_dir(dev_name(&ssi->device), NULL);
+ if (IS_ERR(omap_ssi->dir))
+ return PTR_ERR(omap_ssi->dir);
+
+ debugfs_create_file("regs", S_IRUGO, omap_ssi->dir, ssi,
+ &ssi_regs_fops);
+ /* SSI GDD (DMA) */
+ dir = debugfs_create_dir("gdd", omap_ssi->dir);
+ if (IS_ERR(dir))
+ goto rback;
+ debugfs_create_file("regs", S_IRUGO, dir, ssi, &ssi_gdd_regs_fops);
+
+ return 0;
+rback:
+ debugfs_remove_recursive(omap_ssi->dir);
+
+ return PTR_ERR(dir);
+}
+
+static void ssi_debug_remove_ctrl(struct hsi_controller *ssi)
+{
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ debugfs_remove_recursive(omap_ssi->dir);
+}
+#endif /* CONFIG_DEBUG_FS */
+
+/*
+ * FIXME: Horrible HACK needed until we remove the useless wakeline test
+ * in the CMT. To be removed !!!!
+ */
+void ssi_waketest(struct hsi_client *cl, unsigned int enable)
+{
+ struct hsi_port *port = hsi_get_port(cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ omap_port->wktest = !!enable;
+ if (omap_port->wktest) {
+ pm_runtime_get_sync(ssi->device.parent);
+ writel_relaxed(SSI_WAKE(0),
+ omap_ssi->sys + SSI_SET_WAKE_REG(port->num));
+ } else {
+ writel_relaxed(SSI_WAKE(0),
+ omap_ssi->sys + SSI_CLEAR_WAKE_REG(port->num));
+ pm_runtime_put_sync(ssi->device.parent);
+ }
+}
+EXPORT_SYMBOL_GPL(ssi_waketest);
+
+static void ssi_gdd_complete(struct hsi_controller *ssi, unsigned int lch)
+{
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ struct hsi_msg *msg = omap_ssi->gdd_trn[lch].msg;
+ struct hsi_port *port = to_hsi_port(msg->cl->device.parent);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ unsigned int dir;
+ u32 csr;
+ u32 val;
+
+ spin_lock(&omap_ssi->lock);
+
+ val = readl(omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+ val &= ~SSI_GDD_LCH(lch);
+ writel_relaxed(val, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+
+ if (msg->ttype == HSI_MSG_READ) {
+ dir = DMA_FROM_DEVICE;
+ val = SSI_DATAAVAILABLE(msg->channel);
+ pm_runtime_put_sync(ssi->device.parent);
+ } else {
+ dir = DMA_TO_DEVICE;
+ val = SSI_DATAACCEPT(msg->channel);
+ /* Keep clocks reference for write pio event */
+ }
+ dma_unmap_sg(&ssi->device, msg->sgt.sgl, msg->sgt.nents, dir);
+ csr = readw(omap_ssi->gdd + SSI_GDD_CSR_REG(lch));
+ omap_ssi->gdd_trn[lch].msg = NULL; /* release GDD lch */
+ dev_dbg(&port->device, "DMA completed ch %d ttype %d\n",
+ msg->channel, msg->ttype);
+ spin_unlock(&omap_ssi->lock);
+ if (csr & SSI_CSR_TOUR) { /* Timeout error */
+ msg->status = HSI_STATUS_ERROR;
+ msg->actual_len = 0;
+ spin_lock(&omap_port->lock);
+ list_del(&msg->link); /* Dequeue msg */
+ spin_unlock(&omap_port->lock);
+ msg->complete(msg);
+ return;
+ }
+ spin_lock(&omap_port->lock);
+ val |= readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ writel_relaxed(val, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ spin_unlock(&omap_port->lock);
+
+ msg->status = HSI_STATUS_COMPLETED;
+ msg->actual_len = sg_dma_len(msg->sgt.sgl);
+}
+
+static void ssi_gdd_tasklet(unsigned long dev)
+{
+ struct hsi_controller *ssi = (struct hsi_controller *)dev;
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ void __iomem *sys = omap_ssi->sys;
+ unsigned int lch;
+ u32 status_reg;
+
+ pm_runtime_get_sync(ssi->device.parent);
+
+ status_reg = readl(sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+ for (lch = 0; lch < SSI_MAX_GDD_LCH; lch++) {
+ if (status_reg & SSI_GDD_LCH(lch))
+ ssi_gdd_complete(ssi, lch);
+ }
+ writel_relaxed(status_reg, sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+ status_reg = readl(sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+
+ pm_runtime_put_sync(ssi->device.parent);
+
+ if (status_reg)
+ tasklet_hi_schedule(&omap_ssi->gdd_tasklet);
+ else
+ enable_irq(omap_ssi->gdd_irq);
+
+}
+
+static irqreturn_t ssi_gdd_isr(int irq, void *ssi)
+{
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ tasklet_hi_schedule(&omap_ssi->gdd_tasklet);
+ disable_irq_nosync(irq);
+
+ return IRQ_HANDLED;
+}
+
+int __init ssi_get_iomem(struct platform_device *pd,
+ const char *name, void __iomem **pbase, dma_addr_t *phy)
+{
+ struct resource *mem;
+ struct resource *ioarea;
+ void __iomem *base;
+
+ mem = platform_get_resource_byname(pd, IORESOURCE_MEM, name);
+ if (!mem) {
+ dev_err(&pd->dev, "IO memory region missing (%s)\n", name);
+ return -ENXIO;
+ }
+ ioarea = devm_request_mem_region(&pd->dev, mem->start,
+ resource_size(mem), dev_name(&pd->dev));
+ if (!ioarea) {
+ dev_err(&pd->dev, "%s IO memory region request failed\n",
+ mem->name);
+ return -ENXIO;
+ }
+ base = devm_ioremap(&pd->dev, mem->start, resource_size(mem));
+ if (!base) {
+ dev_err(&pd->dev, "%s IO remap failed\n", mem->name);
+ return -ENXIO;
+ }
+ *pbase = base;
+
+ if (phy)
+ *phy = mem->start;
+
+ return 0;
+}
+
+static unsigned long ssi_get_clk_rate(struct hsi_controller *ssi)
+{
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ unsigned long rate = clk_get_rate(omap_ssi->fck);
+ return rate;
+}
+
+static int __init ssi_add_controller(struct hsi_controller *ssi,
+ struct platform_device *pd)
+{
+ struct omap_ssi_controller *omap_ssi;
+ struct resource *irq;
+ int err;
+
+ omap_ssi = devm_kzalloc(&pd->dev, sizeof(*omap_ssi), GFP_KERNEL);
+ if (!omap_ssi) {
+ dev_err(&pd->dev, "not enough memory for omap ssi\n");
+ return -ENOMEM;
+ }
+ ssi->id = pd->id;
+ ssi->owner = THIS_MODULE;
+ ssi->device.parent = &pd->dev;
+ dev_set_name(&ssi->device, "ssi%d", ssi->id);
+ hsi_controller_set_drvdata(ssi, omap_ssi);
+ omap_ssi->dev = &ssi->device;
+ err = ssi_get_iomem(pd, "sys", &omap_ssi->sys, NULL);
+ if (err < 0)
+ return err;
+ err = ssi_get_iomem(pd, "gdd", &omap_ssi->gdd, NULL);
+ if (err < 0)
+ return err;
+ irq = platform_get_resource_byname(pd, IORESOURCE_IRQ, "gdd_mpu");
+ if (!irq) {
+ dev_err(&pd->dev, "GDD IRQ resource missing\n");
+ return -ENXIO;
+ }
+ omap_ssi->gdd_irq = irq->start;
+ tasklet_init(&omap_ssi->gdd_tasklet, ssi_gdd_tasklet,
+ (unsigned long)ssi);
+ err = devm_request_irq(&pd->dev, omap_ssi->gdd_irq, ssi_gdd_isr,
+ 0, irq->name, ssi);
+ if (err < 0) {
+ dev_err(&ssi->device, "Request GDD IRQ %d failed (%d)",
+ omap_ssi->gdd_irq, err);
+ return err;
+ }
+
+ omap_ssi->port = devm_kzalloc(&pd->dev,
+ sizeof(struct omap_ssi_port *) * ssi->num_ports, GFP_KERNEL);
+ if (!omap_ssi->port)
+ return -ENOMEM;
+
+ omap_ssi->fck = devm_clk_get(&pd->dev, "ssi_ssr_fck");
+ if (IS_ERR(omap_ssi->fck)) {
+ dev_err(&pd->dev, "Could not acquire clock \"ssi_ssr_fck\": %li\n",
+ PTR_ERR(omap_ssi->fck));
+ return -ENODEV;
+ }
+
+ omap_ssi->get_loss = omap_pm_get_dev_context_loss_count;
+
+ omap_ssi->max_speed = UINT_MAX;
+ spin_lock_init(&omap_ssi->lock);
+ err = hsi_register_controller(ssi);
+
+ return err;
+}
+
+static int __init ssi_hw_init(struct hsi_controller *ssi)
+{
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ unsigned int i;
+ u32 val;
+ int err;
+
+ err = pm_runtime_get_sync(ssi->device.parent);
+ if (err < 0) {
+ dev_err(&ssi->device, "runtime PM failed %d\n", err);
+ return err;
+ }
+ /* Reseting SSI controller */
+ writel_relaxed(SSI_SOFTRESET, omap_ssi->sys + SSI_SYSCONFIG_REG);
+ val = readl(omap_ssi->sys + SSI_SYSSTATUS_REG);
+ for (i = 0; ((i < 20) && !(val & SSI_RESETDONE)); i++) {
+ msleep(20);
+ val = readl(omap_ssi->sys + SSI_SYSSTATUS_REG);
+ }
+ if (!(val & SSI_RESETDONE)) {
+ dev_err(&ssi->device, "SSI HW reset failed\n");
+ pm_runtime_put_sync(ssi->device.parent);
+ return -EIO;
+ }
+ /* Reseting GDD */
+ writel_relaxed(SSI_SWRESET, omap_ssi->gdd + SSI_GDD_GRST_REG);
+ /* Get FCK rate in KHz */
+ omap_ssi->fck_rate = DIV_ROUND_CLOSEST(ssi_get_clk_rate(ssi), 1000);
+ dev_dbg(&ssi->device, "SSI fck rate %lu KHz\n", omap_ssi->fck_rate);
+ /* Set default PM settings */
+ val = SSI_AUTOIDLE | SSI_SIDLEMODE_SMART | SSI_MIDLEMODE_SMART;
+ writel_relaxed(val, omap_ssi->sys + SSI_SYSCONFIG_REG);
+ omap_ssi->sysconfig = val;
+ writel_relaxed(SSI_CLK_AUTOGATING_ON, omap_ssi->sys + SSI_GDD_GCR_REG);
+ omap_ssi->gdd_gcr = SSI_CLK_AUTOGATING_ON;
+ pm_runtime_put_sync(ssi->device.parent);
+
+ return 0;
+}
+
+static void ssi_remove_controller(struct hsi_controller *ssi)
+{
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ tasklet_kill(&omap_ssi->gdd_tasklet);
+ hsi_unregister_controller(ssi);
+}
+
+static inline int ssi_of_get_available_child_count(const struct device_node *np)
+{
+ struct device_node *child;
+ int num = 0;
+
+ for_each_child_of_node(np, child)
+ if (of_device_is_available(child))
+ num++;
+
+ return num;
+}
+
+static int __init ssi_probe(struct platform_device *pd)
+{
+ struct device_node *np = pd->dev.of_node;
+ struct hsi_controller *ssi;
+ int err;
+ int num_ports;
+
+ if (!np) {
+ dev_err(&pd->dev, "missing device tree data\n");
+ return -EINVAL;
+ }
+
+ num_ports = ssi_of_get_available_child_count(np);
+
+ ssi = hsi_alloc_controller(num_ports, GFP_KERNEL);
+ if (!ssi) {
+ dev_err(&pd->dev, "No memory for controller\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pd, ssi);
+
+ err = ssi_add_controller(ssi, pd);
+ if (err < 0)
+ goto out1;
+
+ pm_runtime_enable(&pd->dev);
+
+ err = ssi_hw_init(ssi);
+ if (err < 0)
+ goto out2;
+#ifdef CONFIG_DEBUG_FS
+ err = ssi_debug_add_ctrl(ssi);
+ if (err < 0)
+ goto out2;
+#endif
+
+ err = of_platform_populate(pd->dev.of_node, NULL, NULL, &pd->dev);
+ if (err) {
+ dev_err(&pd->dev, "failed to create ssi controller ports (err=%d)\n",
+ err);
+ return -ENODEV;
+ }
+
+ dev_info(&pd->dev, "ssi controller initialized (%d ports)!\n",
+ num_ports);
+ return err;
+out2:
+ ssi_remove_controller(ssi);
+out1:
+ platform_set_drvdata(pd, NULL);
+ pm_runtime_disable(&pd->dev);
+
+ return err;
+}
+
+static int __exit ssi_remove(struct platform_device *pd)
+{
+ struct hsi_controller *ssi = platform_get_drvdata(pd);
+
+#ifdef CONFIG_DEBUG_FS
+ ssi_debug_remove_ctrl(ssi);
+#endif
+ ssi_remove_controller(ssi);
+ platform_set_drvdata(pd, NULL);
+
+ pm_runtime_disable(&pd->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int omap_ssi_runtime_suspend(struct device *dev)
+{
+ struct hsi_controller *ssi = dev_get_drvdata(dev);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ dev_dbg(dev, "runtime suspend!\n");
+
+ if (omap_ssi->get_loss)
+ omap_ssi->loss_count =
+ (*omap_ssi->get_loss)(ssi->device.parent);
+
+ return 0;
+}
+
+static int omap_ssi_runtime_resume(struct device *dev)
+{
+ struct hsi_controller *ssi = dev_get_drvdata(dev);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ dev_dbg(dev, "runtime resume!\n");
+
+ if ((omap_ssi->get_loss) && (omap_ssi->loss_count ==
+ (*omap_ssi->get_loss)(ssi->device.parent)))
+ return 0;
+
+ writel_relaxed(omap_ssi->gdd_gcr, omap_ssi->gdd + SSI_GDD_GCR_REG);
+
+ return 0;
+}
+
+static const struct dev_pm_ops omap_ssi_pm_ops = {
+ SET_RUNTIME_PM_OPS(omap_ssi_runtime_suspend, omap_ssi_runtime_resume,
+ NULL)
+};
+
+#define DEV_PM_OPS (&omap_ssi_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_ssi_of_match[] = {
+ { .compatible = "ti,omap3-ssi", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_ssi_of_match);
+#else
+#define omap_ssi_of_match NULL
+#endif
+
+static struct platform_driver ssi_pdriver = {
+ .remove = __exit_p(ssi_remove),
+ .driver = {
+ .name = "omap_ssi",
+ .owner = THIS_MODULE,
+ .pm = DEV_PM_OPS,
+ .of_match_table = omap_ssi_of_match,
+ },
+};
+
+module_platform_driver_probe(ssi_pdriver, ssi_probe);
+
+MODULE_ALIAS("platform:omap_ssi");
+MODULE_AUTHOR("Carlos Chinea <[email protected]>");
+MODULE_DESCRIPTION("Synchronous Serial Interface Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hsi/controllers/omap_ssi.h b/drivers/hsi/controllers/omap_ssi.h
new file mode 100644
index 0000000..5892b0d
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi.h
@@ -0,0 +1,167 @@
+/* OMAP SSI internal interface.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2013 Sebastian Reichel
+ *
+ * Contact: Carlos Chinea <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_HSI_OMAP_SSI_H__
+#define __LINUX_HSI_OMAP_SSI_H__
+
+#include <linux/device.h>
+#include <linux/hsi/hsi.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+
+#define SSI_MAX_CHANNELS 8
+#define SSI_MAX_GDD_LCH 8
+#define SSI_BYTES_TO_FRAMES(x) ((((x) - 1) >> 2) + 1)
+
+/**
+ * struct omap_ssm_ctx - OMAP synchronous serial module (TX/RX) context
+ * @mode: Bit transmission mode
+ * @channels: Number of channels
+ * @framesize: Frame size in bits
+ * @timeout: RX frame timeout
+ * @divisor: TX divider
+ * @arb_mode: Arbitration mode for TX frame (Round robin, priority)
+ */
+struct omap_ssm_ctx {
+ u32 mode;
+ u32 channels;
+ u32 frame_size;
+ union {
+ u32 timeout; /* Rx Only */
+ struct {
+ u32 arb_mode;
+ u32 divisor;
+ }; /* Tx only */
+ };
+};
+
+/**
+ * struct omap_ssi_port - OMAP SSI port data
+ * @dev: device associated to the port (HSI port)
+ * @pdev: platform device associated to the port
+ * @sst_dma: SSI transmitter physical base address
+ * @ssr_dma: SSI receiver physical base address
+ * @sst_base: SSI transmitter base address
+ * @ssr_base: SSI receiver base address
+ * @wk_lock: spin lock to serialize access to the wake lines
+ * @lock: Spin lock to serialize access to the SSI port
+ * @channels: Current number of channels configured (1,2,4 or 8)
+ * @txqueue: TX message queues
+ * @rxqueue: RX message queues
+ * @brkqueue: Queue of incoming HWBREAK requests (FRAME mode)
+ * @irq: IRQ number
+ * @wake_irq: IRQ number for incoming wake line (-1 if none)
+ * @wake_gpio: GPIO number for incoming wake line (-1 if none)
+ * @pio_tasklet: Bottom half for PIO transfers and events
+ * @wake_tasklet: Bottom half for incoming wake events
+ * @wkin_cken: Keep track of clock references due to the incoming wake line
+ * @wk_refcount: Reference count for output wake line
+ * @sys_mpu_enable: Context for the interrupt enable register for irq 0
+ * @sst: Context for the synchronous serial transmitter
+ * @ssr: Context for the synchronous serial receiver
+ */
+struct omap_ssi_port {
+ struct device *dev;
+ struct device *pdev;
+ dma_addr_t sst_dma;
+ dma_addr_t ssr_dma;
+ void __iomem *sst_base;
+ void __iomem *ssr_base;
+ spinlock_t wk_lock;
+ spinlock_t lock;
+ unsigned int channels;
+ struct list_head txqueue[SSI_MAX_CHANNELS];
+ struct list_head rxqueue[SSI_MAX_CHANNELS];
+ struct list_head brkqueue;
+ unsigned int irq;
+ int wake_irq;
+ int wake_gpio;
+ struct tasklet_struct pio_tasklet;
+ struct tasklet_struct wake_tasklet;
+ bool wktest:1; /* FIXME: HACK to be removed */
+ bool wkin_cken:1; /* Workaround */
+ unsigned int wk_refcount;
+ /* OMAP SSI port context */
+ u32 sys_mpu_enable; /* We use only one irq */
+ struct omap_ssm_ctx sst;
+ struct omap_ssm_ctx ssr;
+ u32 loss_count;
+ u32 port_id;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dir;
+#endif
+};
+
+/**
+ * struct gdd_trn - GDD transaction data
+ * @msg: Pointer to the HSI message being served
+ * @sg: Pointer to the current sg entry being served
+ */
+struct gdd_trn {
+ struct hsi_msg *msg;
+ struct scatterlist *sg;
+};
+
+/**
+ * struct omap_ssi_controller - OMAP SSI controller data
+ * @dev: device associated to the controller (HSI controller)
+ * @sys: SSI I/O base address
+ * @gdd: GDD I/O base address
+ * @fck: SSI functional clock
+ * @gdd_irq: IRQ line for GDD
+ * @gdd_tasklet: bottom half for DMA transfers
+ * @gdd_trn: Array of GDD transaction data for ongoing GDD transfers
+ * @lock: lock to serialize access to GDD
+ * @loss_count: To follow if we need to restore context or not
+ * @max_speed: Maximum TX speed (Kb/s) set by the clients.
+ * @sysconfig: SSI controller saved context
+ * @gdd_gcr: SSI GDD saved context
+ * @get_loss: Pointer to omap_pm_get_dev_context_loss_count, if any
+ * @port: Array of pointers of the ports of the controller
+ * @dir: Debugfs SSI root directory
+ */
+struct omap_ssi_controller {
+ struct device *dev;
+ void __iomem *sys;
+ void __iomem *gdd;
+ struct clk *fck;
+ unsigned int gdd_irq;
+ struct tasklet_struct gdd_tasklet;
+ struct gdd_trn gdd_trn[SSI_MAX_GDD_LCH];
+ spinlock_t lock;
+ unsigned long fck_rate;
+ u32 loss_count;
+ u32 max_speed;
+ /* OMAP SSI Controller context */
+ u32 sysconfig;
+ u32 gdd_gcr;
+ int (*get_loss)(struct device *dev);
+ struct omap_ssi_port **port;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *dir;
+#endif
+};
+
+int __init ssi_get_iomem(struct platform_device *pd,
+ const char *name, void __iomem **pbase, dma_addr_t *phy);
+
+#endif /* __LINUX_HSI_OMAP_SSI_H__ */
diff --git a/drivers/hsi/controllers/omap_ssi_port.c b/drivers/hsi/controllers/omap_ssi_port.c
new file mode 100644
index 0000000..eb28028
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi_port.c
@@ -0,0 +1,1346 @@
+/* OMAP SSI port driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2013 Sebastian Reichel
+ *
+ * Contact: Carlos Chinea <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/of_gpio.h>
+#include <linux/debugfs.h>
+
+#include "omap_ssi_regs.h"
+#include "omap_ssi.h"
+
+static inline unsigned int ssi_wakein(struct hsi_port *port)
+{
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ return gpio_get_value(omap_port->wake_gpio);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void ssi_debug_remove_port(struct hsi_port *port)
+{
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+
+ debugfs_remove_recursive(omap_port->dir);
+}
+
+static int ssi_debug_port_show(struct seq_file *m, void *p __maybe_unused)
+{
+ struct hsi_port *port = m->private;
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ void __iomem *base = omap_ssi->sys;
+ unsigned int ch;
+
+ pm_runtime_get_sync(omap_port->pdev);
+ if (omap_port->wake_irq > 0)
+ seq_printf(m, "CAWAKE\t\t: %d\n", ssi_wakein(port));
+ seq_printf(m, "WAKE\t\t: 0x%08x\n",
+ readl(base + SSI_WAKE_REG(port->num)));
+ seq_printf(m, "MPU_ENABLE_IRQ%d\t: 0x%08x\n", 0,
+ readl(base + SSI_MPU_ENABLE_REG(port->num, 0)));
+ seq_printf(m, "MPU_STATUS_IRQ%d\t: 0x%08x\n", 0,
+ readl(base + SSI_MPU_STATUS_REG(port->num, 0)));
+ /* SST */
+ base = omap_port->sst_base;
+ seq_puts(m, "\nSST\n===\n");
+ seq_printf(m, "ID SST\t\t: 0x%08x\n",
+ readl(base + SSI_SST_ID_REG));
+ seq_printf(m, "MODE\t\t: 0x%08x\n",
+ readl(base + SSI_SST_MODE_REG));
+ seq_printf(m, "FRAMESIZE\t: 0x%08x\n",
+ readl(base + SSI_SST_FRAMESIZE_REG));
+ seq_printf(m, "DIVISOR\t\t: 0x%08x\n",
+ readl(base + SSI_SST_DIVISOR_REG));
+ seq_printf(m, "CHANNELS\t: 0x%08x\n",
+ readl(base + SSI_SST_CHANNELS_REG));
+ seq_printf(m, "ARBMODE\t\t: 0x%08x\n",
+ readl(base + SSI_SST_ARBMODE_REG));
+ seq_printf(m, "TXSTATE\t\t: 0x%08x\n",
+ readl(base + SSI_SST_TXSTATE_REG));
+ seq_printf(m, "BUFSTATE\t: 0x%08x\n",
+ readl(base + SSI_SST_BUFSTATE_REG));
+ seq_printf(m, "BREAK\t\t: 0x%08x\n",
+ readl(base + SSI_SST_BREAK_REG));
+ for (ch = 0; ch < omap_port->channels; ch++) {
+ seq_printf(m, "BUFFER_CH%d\t: 0x%08x\n", ch,
+ readl(base + SSI_SST_BUFFER_CH_REG(ch)));
+ }
+ /* SSR */
+ base = omap_port->ssr_base;
+ seq_puts(m, "\nSSR\n===\n");
+ seq_printf(m, "ID SSR\t\t: 0x%08x\n",
+ readl(base + SSI_SSR_ID_REG));
+ seq_printf(m, "MODE\t\t: 0x%08x\n",
+ readl(base + SSI_SSR_MODE_REG));
+ seq_printf(m, "FRAMESIZE\t: 0x%08x\n",
+ readl(base + SSI_SSR_FRAMESIZE_REG));
+ seq_printf(m, "CHANNELS\t: 0x%08x\n",
+ readl(base + SSI_SSR_CHANNELS_REG));
+ seq_printf(m, "TIMEOUT\t\t: 0x%08x\n",
+ readl(base + SSI_SSR_TIMEOUT_REG));
+ seq_printf(m, "RXSTATE\t\t: 0x%08x\n",
+ readl(base + SSI_SSR_RXSTATE_REG));
+ seq_printf(m, "BUFSTATE\t: 0x%08x\n",
+ readl(base + SSI_SSR_BUFSTATE_REG));
+ seq_printf(m, "BREAK\t\t: 0x%08x\n",
+ readl(base + SSI_SSR_BREAK_REG));
+ seq_printf(m, "ERROR\t\t: 0x%08x\n",
+ readl(base + SSI_SSR_ERROR_REG));
+ seq_printf(m, "ERRORACK\t: 0x%08x\n",
+ readl(base + SSI_SSR_ERRORACK_REG));
+ for (ch = 0; ch < omap_port->channels; ch++) {
+ seq_printf(m, "BUFFER_CH%d\t: 0x%08x\n", ch,
+ readl(base + SSI_SSR_BUFFER_CH_REG(ch)));
+ }
+ pm_runtime_put_sync(omap_port->pdev);
+
+ return 0;
+}
+
+static int ssi_port_regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ssi_debug_port_show, inode->i_private);
+}
+
+static const struct file_operations ssi_port_regs_fops = {
+ .open = ssi_port_regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int ssi_div_get(void *data, u64 *val)
+{
+ struct hsi_port *port = data;
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+
+ pm_runtime_get_sync(omap_port->pdev);
+ *val = readl(omap_port->sst_base + SSI_SST_DIVISOR_REG);
+ pm_runtime_put_sync(omap_port->pdev);
+
+ return 0;
+}
+
+static int ssi_div_set(void *data, u64 val)
+{
+ struct hsi_port *port = data;
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+
+ if (val > 127)
+ return -EINVAL;
+
+ pm_runtime_get_sync(omap_port->pdev);
+ writel(val, omap_port->sst_base + SSI_SST_DIVISOR_REG);
+ omap_port->sst.divisor = val;
+ pm_runtime_put_sync(omap_port->pdev);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(ssi_sst_div_fops, ssi_div_get, ssi_div_set, "%llu\n");
+
+static int __init ssi_debug_add_port(struct omap_ssi_port *omap_port,
+ struct dentry *dir)
+{
+ struct hsi_port *port = to_hsi_port(omap_port->dev);
+
+ dir = debugfs_create_dir(dev_name(omap_port->dev), dir);
+ if (IS_ERR(dir))
+ return PTR_ERR(dir);
+ omap_port->dir = dir;
+ debugfs_create_file("regs", S_IRUGO, dir, port, &ssi_port_regs_fops);
+ dir = debugfs_create_dir("sst", dir);
+ if (IS_ERR(dir))
+ return PTR_ERR(dir);
+ debugfs_create_file("divisor", S_IRUGO | S_IWUSR, dir, port,
+ &ssi_sst_div_fops);
+
+ return 0;
+}
+#endif
+
+static int ssi_claim_lch(struct hsi_msg *msg)
+{
+
+ struct hsi_port *port = hsi_get_port(msg->cl);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ int lch;
+
+ for (lch = 0; lch < SSI_MAX_GDD_LCH; lch++)
+ if (!omap_ssi->gdd_trn[lch].msg) {
+ omap_ssi->gdd_trn[lch].msg = msg;
+ omap_ssi->gdd_trn[lch].sg = msg->sgt.sgl;
+ return lch;
+ }
+
+ return -EBUSY;
+}
+
+static int ssi_start_dma(struct hsi_msg *msg, int lch)
+{
+ struct hsi_port *port = hsi_get_port(msg->cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ void __iomem *gdd = omap_ssi->gdd;
+ int err;
+ u16 csdp;
+ u16 ccr;
+ u32 s_addr;
+ u32 d_addr;
+ u32 tmp;
+
+ if (msg->ttype == HSI_MSG_READ) {
+ err = dma_map_sg(&ssi->device, msg->sgt.sgl, msg->sgt.nents,
+ DMA_FROM_DEVICE);
+ if (err < 0) {
+ dev_dbg(&ssi->device, "DMA map SG failed !\n");
+ return err;
+ }
+ csdp = SSI_DST_BURST_4x32_BIT | SSI_DST_MEMORY_PORT |
+ SSI_SRC_SINGLE_ACCESS0 | SSI_SRC_PERIPHERAL_PORT |
+ SSI_DATA_TYPE_S32;
+ ccr = msg->channel + 0x10 + (port->num * 8); /* Sync */
+ ccr |= SSI_DST_AMODE_POSTINC | SSI_SRC_AMODE_CONST |
+ SSI_CCR_ENABLE;
+ s_addr = omap_port->ssr_dma +
+ SSI_SSR_BUFFER_CH_REG(msg->channel);
+ d_addr = sg_dma_address(msg->sgt.sgl);
+ } else {
+ err = dma_map_sg(&ssi->device, msg->sgt.sgl, msg->sgt.nents,
+ DMA_TO_DEVICE);
+ if (err < 0) {
+ dev_dbg(&ssi->device, "DMA map SG failed !\n");
+ return err;
+ }
+ csdp = SSI_SRC_BURST_4x32_BIT | SSI_SRC_MEMORY_PORT |
+ SSI_DST_SINGLE_ACCESS0 | SSI_DST_PERIPHERAL_PORT |
+ SSI_DATA_TYPE_S32;
+ ccr = (msg->channel + 1 + (port->num * 8)) & 0xf; /* Sync */
+ ccr |= SSI_SRC_AMODE_POSTINC | SSI_DST_AMODE_CONST |
+ SSI_CCR_ENABLE;
+ s_addr = sg_dma_address(msg->sgt.sgl);
+ d_addr = omap_port->sst_dma +
+ SSI_SST_BUFFER_CH_REG(msg->channel);
+ }
+ dev_dbg(&ssi->device, "lch %d cdsp %08x ccr %04x s_addr %08x d_addr %08x\n",
+ lch, csdp, ccr, s_addr, d_addr);
+
+ /* Hold clocks during the transfer */
+ pm_runtime_get_sync(omap_port->pdev);
+
+ writew_relaxed(csdp, gdd + SSI_GDD_CSDP_REG(lch));
+ writew_relaxed(SSI_BLOCK_IE | SSI_TOUT_IE, gdd + SSI_GDD_CICR_REG(lch));
+ writel_relaxed(d_addr, gdd + SSI_GDD_CDSA_REG(lch));
+ writel_relaxed(s_addr, gdd + SSI_GDD_CSSA_REG(lch));
+ writew_relaxed(SSI_BYTES_TO_FRAMES(msg->sgt.sgl->length),
+ gdd + SSI_GDD_CEN_REG(lch));
+
+ spin_lock_bh(&omap_ssi->lock);
+ tmp = readl(omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+ tmp |= SSI_GDD_LCH(lch);
+ writel_relaxed(tmp, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+ spin_unlock_bh(&omap_ssi->lock);
+ writew(ccr, gdd + SSI_GDD_CCR_REG(lch));
+ msg->status = HSI_STATUS_PROCEEDING;
+
+ return 0;
+}
+
+static int ssi_start_pio(struct hsi_msg *msg)
+{
+ struct hsi_port *port = hsi_get_port(msg->cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ u32 val;
+
+ pm_runtime_get_sync(omap_port->pdev);
+ if (msg->ttype == HSI_MSG_WRITE) {
+ val = SSI_DATAACCEPT(msg->channel);
+ /* Hold clocks for pio writes */
+ pm_runtime_get_sync(omap_port->pdev);
+ } else {
+ val = SSI_DATAAVAILABLE(msg->channel) | SSI_ERROROCCURED;
+ }
+ dev_dbg(&port->device, "Single %s transfer\n",
+ msg->ttype ? "write" : "read");
+ val |= readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ writel(val, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ pm_runtime_put_sync(omap_port->pdev);
+ msg->actual_len = 0;
+ msg->status = HSI_STATUS_PROCEEDING;
+
+ return 0;
+}
+
+static int ssi_start_transfer(struct list_head *queue)
+{
+ struct hsi_msg *msg;
+ int lch = -1;
+
+ if (list_empty(queue))
+ return 0;
+ msg = list_first_entry(queue, struct hsi_msg, link);
+ if (msg->status != HSI_STATUS_QUEUED)
+ return 0;
+ if ((msg->sgt.nents) && (msg->sgt.sgl->length > sizeof(u32)))
+ lch = ssi_claim_lch(msg);
+ if (lch >= 0)
+ return ssi_start_dma(msg, lch);
+ else
+ return ssi_start_pio(msg);
+}
+
+static int ssi_async_break(struct hsi_msg *msg)
+{
+ struct hsi_port *port = hsi_get_port(msg->cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ int err = 0;
+ u32 tmp;
+
+ pm_runtime_get_sync(omap_port->pdev);
+ if (msg->ttype == HSI_MSG_WRITE) {
+ if (omap_port->sst.mode != SSI_MODE_FRAME) {
+ err = -EINVAL;
+ goto out;
+ }
+ writel(1, omap_port->sst_base + SSI_SST_BREAK_REG);
+ msg->status = HSI_STATUS_COMPLETED;
+ msg->complete(msg);
+ } else {
+ if (omap_port->ssr.mode != SSI_MODE_FRAME) {
+ err = -EINVAL;
+ goto out;
+ }
+ spin_lock_bh(&omap_port->lock);
+ tmp = readl(omap_ssi->sys +
+ SSI_MPU_ENABLE_REG(port->num, 0));
+ writel(tmp | SSI_BREAKDETECTED,
+ omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ msg->status = HSI_STATUS_PROCEEDING;
+ list_add_tail(&msg->link, &omap_port->brkqueue);
+ spin_unlock_bh(&omap_port->lock);
+ }
+out:
+ pm_runtime_put_sync(omap_port->pdev);
+
+ return err;
+}
+
+static int ssi_async(struct hsi_msg *msg)
+{
+ struct hsi_port *port = hsi_get_port(msg->cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct list_head *queue;
+ int err = 0;
+
+ BUG_ON(!msg);
+
+ if (msg->sgt.nents > 1)
+ return -ENOSYS; /* TODO: Add sg support */
+
+ if (msg->break_frame)
+ return ssi_async_break(msg);
+
+ if (msg->ttype) {
+ BUG_ON(msg->channel >= omap_port->sst.channels);
+ queue = &omap_port->txqueue[msg->channel];
+ } else {
+ BUG_ON(msg->channel >= omap_port->ssr.channels);
+ queue = &omap_port->rxqueue[msg->channel];
+ }
+ msg->status = HSI_STATUS_QUEUED;
+ spin_lock_bh(&omap_port->lock);
+ list_add_tail(&msg->link, queue);
+ err = ssi_start_transfer(queue);
+ if (err < 0) {
+ list_del(&msg->link);
+ msg->status = HSI_STATUS_ERROR;
+ }
+ spin_unlock_bh(&omap_port->lock);
+ dev_dbg(&port->device, "msg status %d ttype %d ch %d\n",
+ msg->status, msg->ttype, msg->channel);
+
+ return err;
+}
+
+static u32 ssi_calculate_div(struct hsi_controller *ssi)
+{
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ u32 tx_fckrate = (u32) omap_ssi->fck_rate;
+
+ /* / 2 : SSI TX clock is always half of the SSI functional clock */
+ tx_fckrate >>= 1;
+ /* Round down when tx_fckrate % omap_ssi->max_speed == 0 */
+ tx_fckrate--;
+ dev_dbg(&ssi->device, "TX div %d for fck_rate %lu Khz speed %d Kb/s\n",
+ tx_fckrate / omap_ssi->max_speed, omap_ssi->fck_rate,
+ omap_ssi->max_speed);
+
+ return tx_fckrate / omap_ssi->max_speed;
+}
+
+static void ssi_flush_queue(struct list_head *queue, struct hsi_client *cl)
+{
+ struct list_head *node, *tmp;
+ struct hsi_msg *msg;
+
+ list_for_each_safe(node, tmp, queue) {
+ msg = list_entry(node, struct hsi_msg, link);
+ if ((cl) && (cl != msg->cl))
+ continue;
+ list_del(node);
+ pr_debug("flush queue: ch %d, msg %p len %d type %d ctxt %p\n",
+ msg->channel, msg, msg->sgt.sgl->length,
+ msg->ttype, msg->context);
+ if (msg->destructor)
+ msg->destructor(msg);
+ else
+ hsi_free_msg(msg);
+ }
+}
+
+static int ssi_setup(struct hsi_client *cl)
+{
+ struct hsi_port *port = to_hsi_port(cl->device.parent);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ void __iomem *sst = omap_port->sst_base;
+ void __iomem *ssr = omap_port->ssr_base;
+ u32 div;
+ u32 val;
+ int err = 0;
+
+ pm_runtime_get_sync(omap_port->pdev);
+ spin_lock_bh(&omap_port->lock);
+ if (cl->tx_cfg.speed)
+ omap_ssi->max_speed = cl->tx_cfg.speed;
+ div = ssi_calculate_div(ssi);
+ if (div > SSI_MAX_DIVISOR) {
+ dev_err(&cl->device, "Invalid TX speed %d Mb/s (div %d)\n",
+ cl->tx_cfg.speed, div);
+ err = -EINVAL;
+ goto out;
+ }
+ /* Set TX/RX module to sleep to stop TX/RX during cfg update */
+ writel_relaxed(SSI_MODE_SLEEP, sst + SSI_SST_MODE_REG);
+ writel_relaxed(SSI_MODE_SLEEP, ssr + SSI_SSR_MODE_REG);
+ /* Flush posted write */
+ val = readl(ssr + SSI_SSR_MODE_REG);
+ /* TX */
+ writel_relaxed(31, sst + SSI_SST_FRAMESIZE_REG);
+ writel_relaxed(div, sst + SSI_SST_DIVISOR_REG);
+ writel_relaxed(cl->tx_cfg.channels, sst + SSI_SST_CHANNELS_REG);
+ writel_relaxed(cl->tx_cfg.arb_mode, sst + SSI_SST_ARBMODE_REG);
+ writel_relaxed(cl->tx_cfg.mode, sst + SSI_SST_MODE_REG);
+ /* RX */
+ writel_relaxed(31, ssr + SSI_SSR_FRAMESIZE_REG);
+ writel_relaxed(cl->rx_cfg.channels, ssr + SSI_SSR_CHANNELS_REG);
+ writel_relaxed(0, ssr + SSI_SSR_TIMEOUT_REG);
+ /* Cleanup the break queue if we leave FRAME mode */
+ if ((omap_port->ssr.mode == SSI_MODE_FRAME) &&
+ (cl->rx_cfg.mode != SSI_MODE_FRAME))
+ ssi_flush_queue(&omap_port->brkqueue, cl);
+ writel_relaxed(cl->rx_cfg.mode, ssr + SSI_SSR_MODE_REG);
+ omap_port->channels = max(cl->rx_cfg.channels, cl->tx_cfg.channels);
+ /* Shadow registering for OFF mode */
+ /* SST */
+ omap_port->sst.divisor = div;
+ omap_port->sst.frame_size = 31;
+ omap_port->sst.channels = cl->tx_cfg.channels;
+ omap_port->sst.arb_mode = cl->tx_cfg.arb_mode;
+ omap_port->sst.mode = cl->tx_cfg.mode;
+ /* SSR */
+ omap_port->ssr.frame_size = 31;
+ omap_port->ssr.timeout = 0;
+ omap_port->ssr.channels = cl->rx_cfg.channels;
+ omap_port->ssr.mode = cl->rx_cfg.mode;
+out:
+ spin_unlock_bh(&omap_port->lock);
+ pm_runtime_put_sync(omap_port->pdev);
+
+ return err;
+}
+
+static int ssi_flush(struct hsi_client *cl)
+{
+ struct hsi_port *port = hsi_get_port(cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ struct hsi_msg *msg;
+ void __iomem *sst = omap_port->sst_base;
+ void __iomem *ssr = omap_port->ssr_base;
+ unsigned int i;
+ u32 err;
+
+ pm_runtime_get_sync(omap_port->pdev);
+ spin_lock_bh(&omap_port->lock);
+ /* Stop all DMA transfers */
+ for (i = 0; i < SSI_MAX_GDD_LCH; i++) {
+ msg = omap_ssi->gdd_trn[i].msg;
+ if (!msg || (port != hsi_get_port(msg->cl)))
+ continue;
+ writew_relaxed(0, omap_ssi->gdd + SSI_GDD_CCR_REG(i));
+ if (msg->ttype == HSI_MSG_READ)
+ pm_runtime_put_sync(omap_port->pdev);
+ omap_ssi->gdd_trn[i].msg = NULL;
+ }
+ /* Flush all SST buffers */
+ writel_relaxed(0, sst + SSI_SST_BUFSTATE_REG);
+ writel_relaxed(0, sst + SSI_SST_TXSTATE_REG);
+ /* Flush all SSR buffers */
+ writel_relaxed(0, ssr + SSI_SSR_RXSTATE_REG);
+ writel_relaxed(0, ssr + SSI_SSR_BUFSTATE_REG);
+ /* Flush all errors */
+ err = readl(ssr + SSI_SSR_ERROR_REG);
+ writel_relaxed(err, ssr + SSI_SSR_ERRORACK_REG);
+ /* Flush break */
+ writel_relaxed(0, ssr + SSI_SSR_BREAK_REG);
+ /* Clear interrupts */
+ writel_relaxed(0, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ writel_relaxed(0xffffff00,
+ omap_ssi->sys + SSI_MPU_STATUS_REG(port->num, 0));
+ writel_relaxed(0, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+ writel(0xff, omap_ssi->sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+ /* Dequeue all pending requests */
+ for (i = 0; i < omap_port->channels; i++) {
+ /* Release write clocks */
+ if (!list_empty(&omap_port->txqueue[i]))
+ pm_runtime_put_sync(omap_port->pdev);
+ ssi_flush_queue(&omap_port->txqueue[i], NULL);
+ ssi_flush_queue(&omap_port->rxqueue[i], NULL);
+ }
+ ssi_flush_queue(&omap_port->brkqueue, NULL);
+ spin_unlock_bh(&omap_port->lock);
+ pm_runtime_put_sync(omap_port->pdev);
+
+ return 0;
+}
+
+static int ssi_start_tx(struct hsi_client *cl)
+{
+ struct hsi_port *port = hsi_get_port(cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ dev_dbg(&port->device, "Wake out high %d\n", omap_port->wk_refcount);
+
+ spin_lock_bh(&omap_port->wk_lock);
+ if (omap_port->wk_refcount++) {
+ spin_unlock_bh(&omap_port->wk_lock);
+ return 0;
+ }
+ pm_runtime_get_sync(omap_port->pdev); /* Grab clocks */
+ writel(SSI_WAKE(0), omap_ssi->sys + SSI_SET_WAKE_REG(port->num));
+ spin_unlock_bh(&omap_port->wk_lock);
+
+ return 0;
+}
+
+static int ssi_stop_tx(struct hsi_client *cl)
+{
+ struct hsi_port *port = hsi_get_port(cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ dev_dbg(&port->device, "Wake out low %d\n", omap_port->wk_refcount);
+
+ spin_lock_bh(&omap_port->wk_lock);
+ BUG_ON(!omap_port->wk_refcount);
+ if (--omap_port->wk_refcount) {
+ spin_unlock_bh(&omap_port->wk_lock);
+ return 0;
+ }
+ writel(SSI_WAKE(0),
+ omap_ssi->sys + SSI_CLEAR_WAKE_REG(port->num));
+ pm_runtime_put_sync(omap_port->pdev); /* Release clocks */
+ spin_unlock_bh(&omap_port->wk_lock);
+
+ return 0;
+}
+
+static void ssi_transfer(struct omap_ssi_port *omap_port,
+ struct list_head *queue)
+{
+ struct hsi_msg *msg;
+ int err = -1;
+
+ spin_lock_bh(&omap_port->lock);
+ while (err < 0) {
+ err = ssi_start_transfer(queue);
+ if (err < 0) {
+ msg = list_first_entry(queue, struct hsi_msg, link);
+ msg->status = HSI_STATUS_ERROR;
+ msg->actual_len = 0;
+ list_del(&msg->link);
+ spin_unlock_bh(&omap_port->lock);
+ msg->complete(msg);
+ spin_lock_bh(&omap_port->lock);
+ }
+ }
+ spin_unlock_bh(&omap_port->lock);
+}
+
+static void ssi_cleanup_queues(struct hsi_client *cl)
+{
+ struct hsi_port *port = hsi_get_port(cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ struct hsi_msg *msg;
+ unsigned int i;
+ u32 rxbufstate = 0;
+ u32 txbufstate = 0;
+ u32 status = SSI_ERROROCCURED;
+ u32 tmp;
+
+ ssi_flush_queue(&omap_port->brkqueue, cl);
+ if (list_empty(&omap_port->brkqueue))
+ status |= SSI_BREAKDETECTED;
+
+ for (i = 0; i < omap_port->channels; i++) {
+ if (list_empty(&omap_port->txqueue[i]))
+ continue;
+ msg = list_first_entry(&omap_port->txqueue[i], struct hsi_msg,
+ link);
+ if ((msg->cl == cl) && (msg->status == HSI_STATUS_PROCEEDING)) {
+ txbufstate |= (1 << i);
+ status |= SSI_DATAACCEPT(i);
+ /* Release the clocks writes, also GDD ones */
+ pm_runtime_put_sync(omap_port->pdev);
+ }
+ ssi_flush_queue(&omap_port->txqueue[i], cl);
+ }
+ for (i = 0; i < omap_port->channels; i++) {
+ if (list_empty(&omap_port->rxqueue[i]))
+ continue;
+ msg = list_first_entry(&omap_port->rxqueue[i], struct hsi_msg,
+ link);
+ if ((msg->cl == cl) && (msg->status == HSI_STATUS_PROCEEDING)) {
+ rxbufstate |= (1 << i);
+ status |= SSI_DATAAVAILABLE(i);
+ }
+ ssi_flush_queue(&omap_port->rxqueue[i], cl);
+ /* Check if we keep the error detection interrupt armed */
+ if (!list_empty(&omap_port->rxqueue[i]))
+ status &= ~SSI_ERROROCCURED;
+ }
+ /* Cleanup write buffers */
+ tmp = readl(omap_port->sst_base + SSI_SST_BUFSTATE_REG);
+ tmp &= ~txbufstate;
+ writel_relaxed(tmp, omap_port->sst_base + SSI_SST_BUFSTATE_REG);
+ /* Cleanup read buffers */
+ tmp = readl(omap_port->ssr_base + SSI_SSR_BUFSTATE_REG);
+ tmp &= ~rxbufstate;
+ writel_relaxed(tmp, omap_port->ssr_base + SSI_SSR_BUFSTATE_REG);
+ /* Disarm and ack pending interrupts */
+ tmp = readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ tmp &= ~status;
+ writel_relaxed(tmp, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ writel_relaxed(status, omap_ssi->sys +
+ SSI_MPU_STATUS_REG(port->num, 0));
+}
+
+static void ssi_cleanup_gdd(struct hsi_controller *ssi, struct hsi_client *cl)
+{
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ struct hsi_port *port = hsi_get_port(cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_msg *msg;
+ unsigned int i;
+ u32 val = 0;
+ u32 tmp;
+
+ for (i = 0; i < SSI_MAX_GDD_LCH; i++) {
+ msg = omap_ssi->gdd_trn[i].msg;
+ if ((!msg) || (msg->cl != cl))
+ continue;
+ writew_relaxed(0, omap_ssi->gdd + SSI_GDD_CCR_REG(i));
+ val |= (1 << i);
+ /*
+ * Clock references for write will be handled in
+ * ssi_cleanup_queues
+ */
+ if (msg->ttype == HSI_MSG_READ)
+ pm_runtime_put_sync(omap_port->pdev);
+ omap_ssi->gdd_trn[i].msg = NULL;
+ }
+ tmp = readl_relaxed(omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+ tmp &= ~val;
+ writel_relaxed(tmp, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+ writel(val, omap_ssi->sys + SSI_GDD_MPU_IRQ_STATUS_REG);
+}
+
+static int ssi_set_port_mode(struct omap_ssi_port *omap_port, u32 mode)
+{
+ writel(mode, omap_port->sst_base + SSI_SST_MODE_REG);
+ writel(mode, omap_port->ssr_base + SSI_SSR_MODE_REG);
+ /* OCP barrier */
+ mode = readl(omap_port->ssr_base + SSI_SSR_MODE_REG);
+
+ return 0;
+}
+
+static int ssi_release(struct hsi_client *cl)
+{
+ struct hsi_port *port = hsi_get_port(cl);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+
+ spin_lock_bh(&omap_port->lock);
+ pm_runtime_get_sync(omap_port->pdev);
+ /* Stop all the pending DMA requests for that client */
+ ssi_cleanup_gdd(ssi, cl);
+ /* Now cleanup all the queues */
+ ssi_cleanup_queues(cl);
+ pm_runtime_put_sync(omap_port->pdev);
+ /* If it is the last client of the port, do extra checks and cleanup */
+ if (port->claimed <= 1) {
+ /*
+ * Drop the clock reference for the incoming wake line
+ * if it is still kept high by the other side.
+ */
+ if (omap_port->wkin_cken) {
+ pm_runtime_put_sync(omap_port->pdev);
+ omap_port->wkin_cken = 0;
+ }
+ pm_runtime_get_sync(omap_port->pdev);
+ /* Stop any SSI TX/RX without a client */
+ ssi_set_port_mode(omap_port, SSI_MODE_SLEEP);
+ omap_port->sst.mode = SSI_MODE_SLEEP;
+ omap_port->ssr.mode = SSI_MODE_SLEEP;
+ pm_runtime_put_sync(omap_port->pdev);
+ WARN_ON(omap_port->wk_refcount != 0);
+ }
+ spin_unlock_bh(&omap_port->lock);
+
+ return 0;
+}
+
+
+
+static void ssi_error(struct hsi_port *port)
+{
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ struct hsi_msg *msg;
+ unsigned int i;
+ u32 err;
+ u32 val;
+ u32 tmp;
+
+ /* ACK error */
+ err = readl(omap_port->ssr_base + SSI_SSR_ERROR_REG);
+ dev_err(&port->device, "SSI error: 0x%02x\n", err);
+ if (!err) {
+ dev_dbg(&port->device, "spurious SSI error ignored!\n");
+ return;
+ }
+ spin_lock(&omap_ssi->lock);
+ /* Cancel all GDD read transfers */
+ for (i = 0, val = 0; i < SSI_MAX_GDD_LCH; i++) {
+ msg = omap_ssi->gdd_trn[i].msg;
+ if ((msg) && (msg->ttype == HSI_MSG_READ)) {
+ writew_relaxed(0, omap_ssi->gdd + SSI_GDD_CCR_REG(i));
+ val |= (1 << i);
+ omap_ssi->gdd_trn[i].msg = NULL;
+ }
+ }
+ tmp = readl(omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+ tmp &= ~val;
+ writel_relaxed(tmp, omap_ssi->sys + SSI_GDD_MPU_IRQ_ENABLE_REG);
+ spin_unlock(&omap_ssi->lock);
+ /* Cancel all PIO read transfers */
+ spin_lock(&omap_port->lock);
+ tmp = readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ tmp &= 0xfeff00ff; /* Disable error & all dataavailable interrupts */
+ writel_relaxed(tmp, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ /* ACK error */
+ writel_relaxed(err, omap_port->ssr_base + SSI_SSR_ERRORACK_REG);
+ writel_relaxed(SSI_ERROROCCURED,
+ omap_ssi->sys + SSI_MPU_STATUS_REG(port->num, 0));
+ /* Signal the error all current pending read requests */
+ for (i = 0; i < omap_port->channels; i++) {
+ if (list_empty(&omap_port->rxqueue[i]))
+ continue;
+ msg = list_first_entry(&omap_port->rxqueue[i], struct hsi_msg,
+ link);
+ list_del(&msg->link);
+ msg->status = HSI_STATUS_ERROR;
+ spin_unlock(&omap_port->lock);
+ msg->complete(msg);
+ /* Now restart queued reads if any */
+ ssi_transfer(omap_port, &omap_port->rxqueue[i]);
+ spin_lock(&omap_port->lock);
+ }
+ spin_unlock(&omap_port->lock);
+}
+
+static void ssi_break_complete(struct hsi_port *port)
+{
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ struct hsi_msg *msg;
+ struct hsi_msg *tmp;
+ u32 val;
+
+ dev_dbg(&port->device, "HWBREAK received\n");
+
+ spin_lock(&omap_port->lock);
+ val = readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ val &= ~SSI_BREAKDETECTED;
+ writel_relaxed(val, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ writel_relaxed(0, omap_port->ssr_base + SSI_SSR_BREAK_REG);
+ writel(SSI_BREAKDETECTED,
+ omap_ssi->sys + SSI_MPU_STATUS_REG(port->num, 0));
+ spin_unlock(&omap_port->lock);
+
+ list_for_each_entry_safe(msg, tmp, &omap_port->brkqueue, link) {
+ msg->status = HSI_STATUS_COMPLETED;
+ spin_lock(&omap_port->lock);
+ list_del(&msg->link);
+ spin_unlock(&omap_port->lock);
+ msg->complete(msg);
+ }
+
+}
+
+static void ssi_pio_complete(struct hsi_port *port, struct list_head *queue)
+{
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_msg *msg;
+ u32 *buf;
+ u32 reg;
+ u32 val;
+
+ spin_lock(&omap_port->lock);
+ msg = list_first_entry(queue, struct hsi_msg, link);
+ if ((!msg->sgt.nents) || (!msg->sgt.sgl->length)) {
+ msg->actual_len = 0;
+ msg->status = HSI_STATUS_PENDING;
+ }
+ if (msg->ttype == HSI_MSG_WRITE)
+ val = SSI_DATAACCEPT(msg->channel);
+ else
+ val = SSI_DATAAVAILABLE(msg->channel);
+ if (msg->status == HSI_STATUS_PROCEEDING) {
+ buf = sg_virt(msg->sgt.sgl) + msg->actual_len;
+ if (msg->ttype == HSI_MSG_WRITE)
+ writel(*buf, omap_port->sst_base +
+ SSI_SST_BUFFER_CH_REG(msg->channel));
+ else
+ *buf = readl(omap_port->ssr_base +
+ SSI_SSR_BUFFER_CH_REG(msg->channel));
+ dev_dbg(&port->device, "ch %d ttype %d 0x%08x\n", msg->channel,
+ msg->ttype, *buf);
+ msg->actual_len += sizeof(*buf);
+ if (msg->actual_len >= msg->sgt.sgl->length)
+ msg->status = HSI_STATUS_COMPLETED;
+ /*
+ * Wait for the last written frame to be really sent before
+ * we call the complete callback
+ */
+ if ((msg->status == HSI_STATUS_PROCEEDING) ||
+ ((msg->status == HSI_STATUS_COMPLETED) &&
+ (msg->ttype == HSI_MSG_WRITE))) {
+ writel(val, omap_ssi->sys +
+ SSI_MPU_STATUS_REG(port->num, 0));
+ spin_unlock(&omap_port->lock);
+
+ return;
+ }
+
+ }
+ /* Transfer completed at this point */
+ reg = readl(omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ if (msg->ttype == HSI_MSG_WRITE) {
+ /* Release clocks for write transfer */
+ pm_runtime_put_sync(omap_port->pdev);
+ }
+ reg &= ~val;
+ writel_relaxed(reg, omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ writel_relaxed(val, omap_ssi->sys + SSI_MPU_STATUS_REG(port->num, 0));
+ list_del(&msg->link);
+ spin_unlock(&omap_port->lock);
+ msg->complete(msg);
+ ssi_transfer(omap_port, queue);
+}
+
+static void ssi_pio_tasklet(unsigned long ssi_port)
+{
+ struct hsi_port *port = (struct hsi_port *)ssi_port;
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ void __iomem *sys = omap_ssi->sys;
+ unsigned int ch;
+ u32 status_reg;
+
+ pm_runtime_get_sync(omap_port->pdev);
+ status_reg = readl(sys + SSI_MPU_STATUS_REG(port->num, 0));
+ status_reg &= readl(sys + SSI_MPU_ENABLE_REG(port->num, 0));
+
+ for (ch = 0; ch < omap_port->channels; ch++) {
+ if (status_reg & SSI_DATAACCEPT(ch))
+ ssi_pio_complete(port, &omap_port->txqueue[ch]);
+ if (status_reg & SSI_DATAAVAILABLE(ch))
+ ssi_pio_complete(port, &omap_port->rxqueue[ch]);
+ }
+ if (status_reg & SSI_BREAKDETECTED)
+ ssi_break_complete(port);
+ if (status_reg & SSI_ERROROCCURED)
+ ssi_error(port);
+
+ status_reg = readl(sys + SSI_MPU_STATUS_REG(port->num, 0));
+ status_reg &= readl(sys + SSI_MPU_ENABLE_REG(port->num, 0));
+ pm_runtime_put_sync(omap_port->pdev);
+
+ if (status_reg)
+ tasklet_hi_schedule(&omap_port->pio_tasklet);
+ else
+ enable_irq(omap_port->irq);
+}
+
+static irqreturn_t ssi_pio_isr(int irq, void *port)
+{
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+
+ tasklet_hi_schedule(&omap_port->pio_tasklet);
+ disable_irq_nosync(irq);
+
+ return IRQ_HANDLED;
+}
+
+static void ssi_wake_tasklet(unsigned long ssi_port)
+{
+ struct hsi_port *port = (struct hsi_port *)ssi_port;
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ if (ssi_wakein(port)) {
+ /**
+ * We can have a quick High-Low-High transition in the line.
+ * In such a case if we have long interrupt latencies,
+ * we can miss the low event or get twice a high event.
+ * This workaround will avoid breaking the clock reference
+ * count when such a situation ocurrs.
+ */
+ spin_lock(&omap_port->lock);
+ if (!omap_port->wkin_cken) {
+ omap_port->wkin_cken = 1;
+ pm_runtime_get_sync(omap_port->pdev);
+ }
+ spin_unlock(&omap_port->lock);
+ dev_dbg(&ssi->device, "Wake in high\n");
+ if (omap_port->wktest) { /* FIXME: HACK ! To be removed */
+ writel(SSI_WAKE(0),
+ omap_ssi->sys + SSI_SET_WAKE_REG(port->num));
+ }
+ hsi_event(port, HSI_EVENT_START_RX);
+ } else {
+ dev_dbg(&ssi->device, "Wake in low\n");
+ if (omap_port->wktest) { /* FIXME: HACK ! To be removed */
+ writel(SSI_WAKE(0),
+ omap_ssi->sys + SSI_CLEAR_WAKE_REG(port->num));
+ }
+ hsi_event(port, HSI_EVENT_STOP_RX);
+ spin_lock(&omap_port->lock);
+ if (omap_port->wkin_cken) {
+ pm_runtime_put_sync(omap_port->pdev);
+ omap_port->wkin_cken = 0;
+ }
+ spin_unlock(&omap_port->lock);
+ }
+}
+
+static irqreturn_t ssi_wake_isr(int irq __maybe_unused, void *ssi_port)
+{
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(ssi_port);
+
+ tasklet_hi_schedule(&omap_port->wake_tasklet);
+
+ return IRQ_HANDLED;
+}
+
+static int __init ssi_port_irq(struct hsi_port *port,
+ struct platform_device *pd)
+{
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct resource *irq;
+ int err;
+
+ irq = platform_get_resource_byname(pd, IORESOURCE_IRQ, "mpu_irq0");
+ if (!irq) {
+ dev_err(&port->device, "Port IRQ resource missing\n");
+ return -ENXIO;
+ }
+ omap_port->irq = irq->start;
+ tasklet_init(&omap_port->pio_tasklet, ssi_pio_tasklet,
+ (unsigned long)port);
+ err = devm_request_irq(&pd->dev, omap_port->irq, ssi_pio_isr,
+ 0, irq->name, port);
+ if (err < 0)
+ dev_err(&port->device, "Request IRQ %d failed (%d)\n",
+ omap_port->irq, err);
+ return err;
+}
+
+static int __init ssi_wake_irq(struct hsi_port *port,
+ struct platform_device *pd)
+{
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ int cawake_irq;
+ int err;
+
+ if (omap_port->wake_gpio == -1) {
+ omap_port->wake_irq = -1;
+ return 0;
+ }
+
+ cawake_irq = gpio_to_irq(omap_port->wake_gpio);
+
+ omap_port->wake_irq = cawake_irq;
+ tasklet_init(&omap_port->wake_tasklet, ssi_wake_tasklet,
+ (unsigned long)port);
+ err = devm_request_irq(&pd->dev, cawake_irq, ssi_wake_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "cawake", port);
+ if (err < 0)
+ dev_err(&port->device, "Request Wake in IRQ %d failed %d\n",
+ cawake_irq, err);
+ err = enable_irq_wake(cawake_irq);
+ if (err < 0)
+ dev_err(&port->device, "Enable wake on the wakeline in irq %d failed %d\n",
+ cawake_irq, err);
+
+ return err;
+}
+
+static void __init ssi_queues_init(struct omap_ssi_port *omap_port)
+{
+ unsigned int ch;
+
+ for (ch = 0; ch < SSI_MAX_CHANNELS; ch++) {
+ INIT_LIST_HEAD(&omap_port->txqueue[ch]);
+ INIT_LIST_HEAD(&omap_port->rxqueue[ch]);
+ }
+ INIT_LIST_HEAD(&omap_port->brkqueue);
+}
+
+static int __init ssi_port_init(struct platform_device *pd, u32 cawake_gpio)
+{
+ struct hsi_port *port;
+ struct omap_ssi_port *omap_port;
+ struct hsi_controller *ssi = dev_get_drvdata(pd->dev.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ u32 port_id;
+ int err;
+
+ dev_dbg(&pd->dev, "init ssi port...\n");
+
+ err = devm_gpio_request_one(&pd->dev, cawake_gpio, GPIOF_DIR_IN,
+ "cawake");
+ if (err) {
+ dev_err(&pd->dev, "could not request cawake gpio (err=%d)!\n",
+ err);
+ return -ENODEV;
+ }
+
+ omap_port = devm_kzalloc(&pd->dev, sizeof(*omap_port), GFP_KERNEL);
+ if (!omap_port)
+ return -ENOMEM;
+ omap_port->wake_gpio = cawake_gpio;
+ omap_port->pdev = &pd->dev;
+
+ if (!ssi->port || !omap_ssi->port) {
+ dev_err(&pd->dev, "ssi controller not initialized!\n");
+ return -ENODEV;
+ }
+
+ /* get id of first uninitialized port in controller */
+ for (port_id = 0; port_id < ssi->num_ports && omap_ssi->port[port_id];
+ port_id++)
+ ;
+
+ if (port_id >= ssi->num_ports) {
+ dev_err(&pd->dev, "port id out of range!\n");
+ return -ENODEV;
+ }
+ omap_port->port_id = port_id;
+
+ /* initialize HSI port */
+ port = ssi->port[port_id];
+ port->async = ssi_async;
+ port->setup = ssi_setup;
+ port->flush = ssi_flush;
+ port->start_tx = ssi_start_tx;
+ port->stop_tx = ssi_stop_tx;
+ port->release = ssi_release;
+ hsi_port_set_drvdata(port, omap_port);
+ omap_ssi->port[port_id] = omap_port;
+
+ platform_set_drvdata(pd, port);
+
+ err = ssi_get_iomem(pd, "tx", &omap_port->sst_base,
+ &omap_port->sst_dma);
+ if (err < 0)
+ return err;
+ err = ssi_get_iomem(pd, "rx", &omap_port->ssr_base,
+ &omap_port->ssr_dma);
+ if (err < 0)
+ return err;
+
+ err = ssi_port_irq(port, pd);
+ if (err < 0)
+ return err;
+ err = ssi_wake_irq(port, pd);
+ if (err < 0)
+ return err;
+
+ ssi_queues_init(omap_port);
+ spin_lock_init(&omap_port->lock);
+ spin_lock_init(&omap_port->wk_lock);
+ omap_port->dev = &port->device;
+
+ pm_runtime_enable(omap_port->pdev);
+
+#ifdef CONFIG_DEBUG_FS
+ err = ssi_debug_add_port(omap_port, omap_ssi->dir);
+ if (err < 0) {
+ pm_runtime_disable(omap_port->pdev);
+ return err;
+ }
+#endif
+
+ dev_info(&pd->dev, "ssi port %u successfully initialized (cawake=%d)\n",
+ port_id, cawake_gpio);
+
+ return 0;
+}
+
+static int __init ssi_port_probe(struct platform_device *pd)
+{
+ struct device_node *np = pd->dev.of_node;
+ u32 cawake_gpio = 0;
+ int ret;
+
+ if (!np) {
+ dev_err(&pd->dev, "missing device tree data\n");
+ return -EINVAL;
+ }
+
+ cawake_gpio = of_get_named_gpio(np, "ti,ssi-cawake-gpio", 0);
+ if (cawake_gpio < 0) {
+ dev_err(&pd->dev, "DT data is missing cawake gpio (err=%d)\n",
+ cawake_gpio);
+ return -ENXIO;
+ }
+
+ ret = ssi_port_init(pd, cawake_gpio);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int __exit ssi_port_remove(struct platform_device *pd)
+{
+ struct hsi_port *port = platform_get_drvdata(pd);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+#ifdef CONFIG_DEBUG_FS
+ ssi_debug_remove_port(port);
+#endif
+
+ tasklet_kill(&omap_port->wake_tasklet);
+ tasklet_kill(&omap_port->pio_tasklet);
+
+ port->async = NULL;
+ port->setup = NULL;
+ port->flush = NULL;
+ port->start_tx = NULL;
+ port->stop_tx = NULL;
+ port->release = NULL;
+ hsi_port_set_drvdata(port, NULL);
+
+ omap_ssi->port[omap_port->port_id] = NULL;
+ platform_set_drvdata(pd, NULL);
+ pm_runtime_disable(&pd->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int ssi_save_port_ctx(struct omap_ssi_port *omap_port)
+{
+ struct hsi_port *port = to_hsi_port(omap_port->dev);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ omap_port->sys_mpu_enable = readl(omap_ssi->sys +
+ SSI_MPU_ENABLE_REG(port->num, 0));
+
+ return 0;
+}
+
+static int ssi_restore_port_ctx(struct omap_ssi_port *omap_port)
+{
+ struct hsi_port *port = to_hsi_port(omap_port->dev);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+ void __iomem *base;
+
+ writel_relaxed(omap_port->sys_mpu_enable,
+ omap_ssi->sys + SSI_MPU_ENABLE_REG(port->num, 0));
+
+ /* SST context */
+ base = omap_port->sst_base;
+ writel_relaxed(omap_port->sst.frame_size, base + SSI_SST_FRAMESIZE_REG);
+ writel_relaxed(omap_port->sst.channels, base + SSI_SST_CHANNELS_REG);
+ writel_relaxed(omap_port->sst.arb_mode, base + SSI_SST_ARBMODE_REG);
+
+ /* SSR context */
+ base = omap_port->ssr_base;
+ writel_relaxed(omap_port->ssr.frame_size, base + SSI_SSR_FRAMESIZE_REG);
+ writel_relaxed(omap_port->ssr.channels, base + SSI_SSR_CHANNELS_REG);
+ writel_relaxed(omap_port->ssr.timeout, base + SSI_SSR_TIMEOUT_REG);
+
+ return 0;
+}
+
+static int ssi_restore_port_mode(struct omap_ssi_port *omap_port)
+{
+ u32 mode;
+
+ writel_relaxed(omap_port->sst.mode,
+ omap_port->sst_base + SSI_SST_MODE_REG);
+ writel_relaxed(omap_port->ssr.mode,
+ omap_port->ssr_base + SSI_SSR_MODE_REG);
+ /* OCP barrier */
+ mode = readl(omap_port->ssr_base + SSI_SSR_MODE_REG);
+
+ return 0;
+}
+
+static int ssi_restore_divisor(struct omap_ssi_port *omap_port)
+{
+ writel_relaxed(omap_port->sst.divisor,
+ omap_port->sst_base + SSI_SST_DIVISOR_REG);
+
+ return 0;
+}
+
+static int omap_ssi_port_runtime_suspend(struct device *dev)
+{
+ struct hsi_port *port = dev_get_drvdata(dev);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ dev_dbg(dev, "port runtime suspend!\n");
+
+ ssi_set_port_mode(omap_port, SSI_MODE_SLEEP);
+ if (omap_ssi->get_loss)
+ omap_port->loss_count =
+ (*omap_ssi->get_loss)(ssi->device.parent);
+ ssi_save_port_ctx(omap_port);
+
+ return 0;
+}
+
+static int omap_ssi_port_runtime_resume(struct device *dev)
+{
+ struct hsi_port *port = dev_get_drvdata(dev);
+ struct omap_ssi_port *omap_port = hsi_port_drvdata(port);
+ struct hsi_controller *ssi = to_hsi_controller(port->device.parent);
+ struct omap_ssi_controller *omap_ssi = hsi_controller_drvdata(ssi);
+
+ dev_dbg(dev, "port runtime resume!\n");
+
+ if ((omap_ssi->get_loss) && (omap_port->loss_count ==
+ (*omap_ssi->get_loss)(ssi->device.parent)))
+ goto mode; /* We always need to restore the mode & TX divisor */
+
+ ssi_restore_port_ctx(omap_port);
+
+mode:
+ ssi_restore_divisor(omap_port);
+ ssi_restore_port_mode(omap_port);
+
+ return 0;
+}
+
+static const struct dev_pm_ops omap_ssi_port_pm_ops = {
+ SET_RUNTIME_PM_OPS(omap_ssi_port_runtime_suspend,
+ omap_ssi_port_runtime_resume, NULL)
+};
+
+#define DEV_PM_OPS (&omap_ssi_port_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_ssi_port_of_match[] = {
+ { .compatible = "ti,omap3-ssi-port", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_ssi_port_of_match);
+#else
+#define omap_ssi_port_of_match NULL
+#endif
+
+static struct platform_driver ssi_port_pdriver = {
+ .remove = __exit_p(ssi_port_remove),
+ .driver = {
+ .name = "omap_ssi_port",
+ .owner = THIS_MODULE,
+ .of_match_table = omap_ssi_port_of_match,
+ .pm = DEV_PM_OPS,
+ },
+};
+
+module_platform_driver_probe(ssi_port_pdriver, ssi_port_probe);
+
+MODULE_ALIAS("platform:omap_ssi_port");
+MODULE_AUTHOR("Carlos Chinea <[email protected]>");
+MODULE_DESCRIPTION("Synchronous Serial Interface Port Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hsi/controllers/omap_ssi_regs.h b/drivers/hsi/controllers/omap_ssi_regs.h
new file mode 100644
index 0000000..b1743ba
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi_regs.h
@@ -0,0 +1,172 @@
+/* Hardware definitions for SSI.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Carlos Chinea <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __OMAP_SSI_REGS_H__
+#define __OMAP_SSI_REGS_H__
+
+#define SSI_NUM_PORTS 1
+/*
+ * SSI SYS registers
+ */
+#define SSI_REVISION_REG 0
+# define SSI_REV_MAJOR 0xf0
+# define SSI_REV_MINOR 0xf
+#define SSI_SYSCONFIG_REG 0x10
+# define SSI_AUTOIDLE (1 << 0)
+# define SSI_SOFTRESET (1 << 1)
+# define SSI_SIDLEMODE_FORCE 0
+# define SSI_SIDLEMODE_NO (1 << 3)
+# define SSI_SIDLEMODE_SMART (1 << 4)
+# define SSI_SIDLEMODE_MASK 0x18
+# define SSI_MIDLEMODE_FORCE 0
+# define SSI_MIDLEMODE_NO (1 << 12)
+# define SSI_MIDLEMODE_SMART (1 << 13)
+# define SSI_MIDLEMODE_MASK 0x3000
+#define SSI_SYSSTATUS_REG 0x14
+# define SSI_RESETDONE 1
+#define SSI_MPU_STATUS_REG(port, irq) (0x808 + ((port) * 0x10) + ((irq) * 2))
+#define SSI_MPU_ENABLE_REG(port, irq) (0x80c + ((port) * 0x10) + ((irq) * 8))
+# define SSI_DATAACCEPT(channel) (1 << (channel))
+# define SSI_DATAAVAILABLE(channel) (1 << ((channel) + 8))
+# define SSI_DATAOVERRUN(channel) (1 << ((channel) + 16))
+# define SSI_ERROROCCURED (1 << 24)
+# define SSI_BREAKDETECTED (1 << 25)
+#define SSI_GDD_MPU_IRQ_STATUS_REG 0x0800
+#define SSI_GDD_MPU_IRQ_ENABLE_REG 0x0804
+# define SSI_GDD_LCH(channel) (1 << (channel))
+#define SSI_WAKE_REG(port) (0xc00 + ((port) * 0x10))
+#define SSI_CLEAR_WAKE_REG(port) (0xc04 + ((port) * 0x10))
+#define SSI_SET_WAKE_REG(port) (0xc08 + ((port) * 0x10))
+# define SSI_WAKE(channel) (1 << (channel))
+# define SSI_WAKE_MASK 0xff
+
+/*
+ * SSI SST registers
+ */
+#define SSI_SST_ID_REG 0
+#define SSI_SST_MODE_REG 4
+# define SSI_MODE_VAL_MASK 3
+# define SSI_MODE_SLEEP 0
+# define SSI_MODE_STREAM 1
+# define SSI_MODE_FRAME 2
+# define SSI_MODE_MULTIPOINTS 3
+#define SSI_SST_FRAMESIZE_REG 8
+# define SSI_FRAMESIZE_DEFAULT 31
+#define SSI_SST_TXSTATE_REG 0xc
+# define SSI_TXSTATE_IDLE 0
+#define SSI_SST_BUFSTATE_REG 0x10
+# define SSI_FULL(channel) (1 << (channel))
+#define SSI_SST_DIVISOR_REG 0x18
+# define SSI_MAX_DIVISOR 127
+#define SSI_SST_BREAK_REG 0x20
+#define SSI_SST_CHANNELS_REG 0x24
+# define SSI_CHANNELS_DEFAULT 4
+#define SSI_SST_ARBMODE_REG 0x28
+# define SSI_ARBMODE_ROUNDROBIN 0
+# define SSI_ARBMODE_PRIORITY 1
+#define SSI_SST_BUFFER_CH_REG(channel) (0x80 + ((channel) * 4))
+#define SSI_SST_SWAPBUF_CH_REG(channel) (0xc0 + ((channel) * 4))
+
+/*
+ * SSI SSR registers
+ */
+#define SSI_SSR_ID_REG 0
+#define SSI_SSR_MODE_REG 4
+#define SSI_SSR_FRAMESIZE_REG 8
+#define SSI_SSR_RXSTATE_REG 0xc
+#define SSI_SSR_BUFSTATE_REG 0x10
+# define SSI_NOTEMPTY(channel) (1 << (channel))
+#define SSI_SSR_BREAK_REG 0x1c
+#define SSI_SSR_ERROR_REG 0x20
+#define SSI_SSR_ERRORACK_REG 0x24
+#define SSI_SSR_OVERRUN_REG 0x2c
+#define SSI_SSR_OVERRUNACK_REG 0x30
+#define SSI_SSR_TIMEOUT_REG 0x34
+# define SSI_TIMEOUT_DEFAULT 0
+#define SSI_SSR_CHANNELS_REG 0x28
+#define SSI_SSR_BUFFER_CH_REG(channel) (0x80 + ((channel) * 4))
+#define SSI_SSR_SWAPBUF_CH_REG(channel) (0xc0 + ((channel) * 4))
+
+/*
+ * SSI GDD registers
+ */
+#define SSI_GDD_HW_ID_REG 0
+#define SSI_GDD_PPORT_ID_REG 0x10
+#define SSI_GDD_MPORT_ID_REG 0x14
+#define SSI_GDD_PPORT_SR_REG 0x20
+#define SSI_GDD_MPORT_SR_REG 0x24
+# define SSI_ACTIVE_LCH_NUM_MASK 0xff
+#define SSI_GDD_TEST_REG 0x40
+# define SSI_TEST 1
+#define SSI_GDD_GCR_REG 0x100
+# define SSI_CLK_AUTOGATING_ON (1 << 3)
+# define SSI_FREE (1 << 2)
+# define SSI_SWITCH_OFF (1 << 0)
+#define SSI_GDD_GRST_REG 0x200
+# define SSI_SWRESET 1
+#define SSI_GDD_CSDP_REG(channel) (0x800 + ((channel) * 0x40))
+# define SSI_DST_BURST_EN_MASK 0xc000
+# define SSI_DST_SINGLE_ACCESS0 0
+# define SSI_DST_SINGLE_ACCESS (1 << 14)
+# define SSI_DST_BURST_4x32_BIT (2 << 14)
+# define SSI_DST_BURST_8x32_BIT (3 << 14)
+# define SSI_DST_MASK 0x1e00
+# define SSI_DST_MEMORY_PORT (8 << 9)
+# define SSI_DST_PERIPHERAL_PORT (9 << 9)
+# define SSI_SRC_BURST_EN_MASK 0x180
+# define SSI_SRC_SINGLE_ACCESS0 0
+# define SSI_SRC_SINGLE_ACCESS (1 << 7)
+# define SSI_SRC_BURST_4x32_BIT (2 << 7)
+# define SSI_SRC_BURST_8x32_BIT (3 << 7)
+# define SSI_SRC_MASK 0x3c
+# define SSI_SRC_MEMORY_PORT (8 << 2)
+# define SSI_SRC_PERIPHERAL_PORT (9 << 2)
+# define SSI_DATA_TYPE_MASK 3
+# define SSI_DATA_TYPE_S32 2
+#define SSI_GDD_CCR_REG(channel) (0x802 + ((channel) * 0x40))
+# define SSI_DST_AMODE_MASK (3 << 14)
+# define SSI_DST_AMODE_CONST 0
+# define SSI_DST_AMODE_POSTINC (1 << 12)
+# define SSI_SRC_AMODE_MASK (3 << 12)
+# define SSI_SRC_AMODE_CONST 0
+# define SSI_SRC_AMODE_POSTINC (1 << 12)
+# define SSI_CCR_ENABLE (1 << 7)
+# define SSI_CCR_SYNC_MASK 0x1f
+#define SSI_GDD_CICR_REG(channel) (0x804 + ((channel) * 0x40))
+# define SSI_BLOCK_IE (1 << 5)
+# define SSI_HALF_IE (1 << 2)
+# define SSI_TOUT_IE (1 << 0)
+#define SSI_GDD_CSR_REG(channel) (0x806 + ((channel) * 0x40))
+# define SSI_CSR_SYNC (1 << 6)
+# define SSI_CSR_BLOCK (1 << 5)
+# define SSI_CSR_HALF (1 << 2)
+# define SSI_CSR_TOUR (1 << 0)
+#define SSI_GDD_CSSA_REG(channel) (0x808 + ((channel) * 0x40))
+#define SSI_GDD_CDSA_REG(channel) (0x80c + ((channel) * 0x40))
+#define SSI_GDD_CEN_REG(channel) (0x810 + ((channel) * 0x40))
+#define SSI_GDD_CSAC_REG(channel) (0x818 + ((channel) * 0x40))
+#define SSI_GDD_CDAC_REG(channel) (0x81a + ((channel) * 0x40))
+#define SSI_GDD_CLNK_CTRL_REG(channel) (0x828 + ((channel) * 0x40))
+# define SSI_ENABLE_LNK (1 << 15)
+# define SSI_STOP_LNK (1 << 14)
+# define SSI_NEXT_CH_ID_MASK 0xf
+
+#endif /* __OMAP_SSI_REGS_H__ */
--
1.8.4.rc3
Add SSI device tree data for OMAP34xx and Nokia N900.
Signed-off-by: Sebastian Reichel <[email protected]>
---
Documentation/devicetree/bindings/hsi/omap_ssi.txt | 73 ++++++++++++++++++++++
arch/arm/boot/dts/omap3-n900.dts | 8 +++
arch/arm/boot/dts/omap34xx.dtsi | 49 +++++++++++++++
3 files changed, 130 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt
diff --git a/Documentation/devicetree/bindings/hsi/omap_ssi.txt b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
new file mode 100644
index 0000000..e3597eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
@@ -0,0 +1,73 @@
+OMAP SSI controller bindings
+
+Required properties:
+- compatible: Should be set to the following value
+ ti,omap3-ssi (applicable to OMAP34xx devices)
+- ti,hwmods: Name of the hwmod associated to the controller, which
+ is "ssi".
+- reg: Contains SSI register address range (base address and
+ length).
+- reg-names: Contains the names of the address ranges. It's
+ expected, that "sys" and "gdd" address ranges are
+ provided.
+- interrupts: Contains the interrupt information for the controller.
+- interrupt-names: Contains the names of the interrupts. It's expected,
+ that "gdd_mpu" is provided.
+- ranges Required as an empty node
+- #address-cells Should be set to <1>
+- #size-cells Should be set to <1>
+
+Each port is represented as a sub-node of the ti,omap3-ssi device.
+
+Required Port sub-node properties:
+- compatible: Should be set to the following value
+ ti,omap3-ssi-port (applicable to OMAP34xx devices)
+- reg: Contains port's register address range (base address
+ and length).
+- reg-names: Contains the names of the address ranges. It's
+ expected, that "tx" and "rx" address ranges are
+ provided.
+- interrupt-parent Should be a phandle for the interrupt controller
+- interrupts: Contains the interrupt information for the port.
+- interrupt-names: Contains the names of the interrupts. It's expected,
+ that "mpu_irq0" and "mpu_irq1" are provided.
+- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE
+ events for the port. This is an optional board-specific
+ property. If it's missing the port will not be
+ enabled.
+
+Example for Nokia N900:
+
+ssi-controller@48058000 {
+ compatible = "ti,omap3-ssi";
+ ti,hwmods = "ssi";
+
+ reg = <0x48058000 0x1000>,
+ <0x48059000 0x1000>;
+ reg-names = "sys",
+ "gdd";
+
+ interrupts = <55>;
+ interrupt-names = "gdd_mpu";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ssi-port@0 {
+ compatible = "ti,omap3-ssi-port";
+
+ reg = <0x4805a000 0x800>,
+ <0x4805a800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>,
+ <52>;
+ interrupt-names = "mpu_irq0",
+ "mpu_irq1";
+
+ ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+ }
+}
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 0582356..cc4a3e2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -186,6 +186,14 @@
power = <50>;
};
+&ssi_port1 {
+ ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+};
+
+&ssi_port2 {
+ status = "disabled";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 5355d61..393b7a7 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -25,4 +25,53 @@
clock-latency = <300000>; /* From legacy driver */
};
};
+
+ ocp {
+ ssi: ssi-controller@48058000 {
+ compatible = "ti,omap3-ssi";
+ ti,hwmods = "ssi";
+
+ reg = <0x48058000 0x1000>,
+ <0x48059000 0x1000>;
+ reg-names = "sys",
+ "gdd";
+
+ interrupts = <55>;
+ interrupt-names = "gdd_mpu";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ssi_port1: ssi-port@0 {
+ compatible = "ti,omap3-ssi-port";
+
+ reg = <0x4805a000 0x800>,
+ <0x4805a800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>,
+ <52>;
+ interrupt-names = "mpu_irq0",
+ "mpu_irq1";
+ };
+
+ ssi_port2: ssi-port@1 {
+ compatible = "ti,omap3-ssi-port";
+
+ reg = <0x4805b000 0x800>,
+ <0x4805b800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupt-parent = <&intc>;
+ interrupts = <53>,
+ <54>;
+ interrupt-names = "mpu_irq0",
+ "mpu_irq1";
+ };
+ };
+ };
};
--
1.8.4.rc3
On Sun, Sep 15, 2013 at 10:44 PM, Sebastian Reichel <[email protected]> wrote:
> Add SSI device tree data for OMAP34xx and Nokia N900.
>
> Signed-off-by: Sebastian Reichel <[email protected]>
> ---
> Documentation/devicetree/bindings/hsi/omap_ssi.txt | 73 ++++++++++++++++++++++
> arch/arm/boot/dts/omap3-n900.dts | 8 +++
> arch/arm/boot/dts/omap34xx.dtsi | 49 +++++++++++++++
> 3 files changed, 130 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt
>
> diff --git a/Documentation/devicetree/bindings/hsi/omap_ssi.txt b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
> new file mode 100644
> index 0000000..e3597eb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
> @@ -0,0 +1,73 @@
> +OMAP SSI controller bindings
> +
> +Required properties:
> +- compatible: Should be set to the following value
> + ti,omap3-ssi (applicable to OMAP34xx devices)
> +- ti,hwmods: Name of the hwmod associated to the controller, which
> + is "ssi".
> +- reg: Contains SSI register address range (base address and
> + length).
> +- reg-names: Contains the names of the address ranges. It's
> + expected, that "sys" and "gdd" address ranges are
> + provided.
> +- interrupts: Contains the interrupt information for the controller.
> +- interrupt-names: Contains the names of the interrupts. It's expected,
> + that "gdd_mpu" is provided.
> +- ranges Required as an empty node
> +- #address-cells Should be set to <1>
> +- #size-cells Should be set to <1>
> +
> +Each port is represented as a sub-node of the ti,omap3-ssi device.
> +
> +Required Port sub-node properties:
> +- compatible: Should be set to the following value
> + ti,omap3-ssi-port (applicable to OMAP34xx devices)
> +- reg: Contains port's register address range (base address
> + and length).
> +- reg-names: Contains the names of the address ranges. It's
> + expected, that "tx" and "rx" address ranges are
> + provided.
> +- interrupt-parent Should be a phandle for the interrupt controller
> +- interrupts: Contains the interrupt information for the port.
> +- interrupt-names: Contains the names of the interrupts. It's expected,
> + that "mpu_irq0" and "mpu_irq1" are provided.
> +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE
> + events for the port. This is an optional board-specific
> + property. If it's missing the port will not be
> + enabled.
> +
> +Example for Nokia N900:
> +
> +ssi-controller@48058000 {
> + compatible = "ti,omap3-ssi";
> + ti,hwmods = "ssi";
> +
> + reg = <0x48058000 0x1000>,
> + <0x48059000 0x1000>;
> + reg-names = "sys",
> + "gdd";
> +
> + interrupts = <55>;
> + interrupt-names = "gdd_mpu";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + ssi-port@0 {
> + compatible = "ti,omap3-ssi-port";
> +
> + reg = <0x4805a000 0x800>,
> + <0x4805a800 0x800>;
> + reg-names = "tx",
> + "rx";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <51>,
> + <52>;
> + interrupt-names = "mpu_irq0",
> + "mpu_irq1";
> +
> + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
> + }
> +}
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index 0582356..cc4a3e2 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -186,6 +186,14 @@
> power = <50>;
> };
>
> +&ssi_port1 {
> + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
> +};
> +
> +&ssi_port2 {
> + status = "disabled";
> +};
> +
> &uart1 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart1_pins>;
> diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
> index 5355d61..393b7a7 100644
> --- a/arch/arm/boot/dts/omap34xx.dtsi
> +++ b/arch/arm/boot/dts/omap34xx.dtsi
> @@ -25,4 +25,53 @@
> clock-latency = <300000>; /* From legacy driver */
> };
> };
> +
> + ocp {
> + ssi: ssi-controller@48058000 {
> + compatible = "ti,omap3-ssi";
> + ti,hwmods = "ssi";
> +
> + reg = <0x48058000 0x1000>,
> + <0x48059000 0x1000>;
> + reg-names = "sys",
> + "gdd";
> +
> + interrupts = <55>;
> + interrupt-names = "gdd_mpu";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + ssi_port1: ssi-port@0 {
> + compatible = "ti,omap3-ssi-port";
> +
> + reg = <0x4805a000 0x800>,
> + <0x4805a800 0x800>;
> + reg-names = "tx",
> + "rx";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <51>,
> + <52>;
> + interrupt-names = "mpu_irq0",
> + "mpu_irq1";
> + };
> +
> + ssi_port2: ssi-port@1 {
> + compatible = "ti,omap3-ssi-port";
> +
> + reg = <0x4805b000 0x800>,
> + <0x4805b800 0x800>;
> + reg-names = "tx",
> + "rx";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <53>,
> + <54>;
> + interrupt-names = "mpu_irq0",
> + "mpu_irq1";
> + };
> + };
> + };
> };
> --
> 1.8.4.rc3
Hi Sebastian,
Is the Synchronous Serial Interface (SSI) only supported by
OMAP34xx/OMAP35xx SoC and not by OMAP36xx/OMAP37xx SoC?
I'm asking this since if SSI is supported by both we should add the
device nodes in omap3.dtsi instead of omap34xx.dtsi.
I thought that all OMAP3 SoC supported SSI and all OMAP4 SoC supported
HSI but I guess I was wrong...
Thanks a lot and best regards,
Javier
On 22:44-20130915, Sebastian Reichel wrote:
> Add SSI device tree data for OMAP34xx and Nokia N900.
>
> Signed-off-by: Sebastian Reichel <[email protected]>
> ---
> Documentation/devicetree/bindings/hsi/omap_ssi.txt | 73 ++++++++++++++++++++++
> arch/arm/boot/dts/omap3-n900.dts | 8 +++
> arch/arm/boot/dts/omap34xx.dtsi | 49 +++++++++++++++
> 3 files changed, 130 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt
>
> diff --git a/Documentation/devicetree/bindings/hsi/omap_ssi.txt b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
> new file mode 100644
> index 0000000..e3597eb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
> @@ -0,0 +1,73 @@
> +OMAP SSI controller bindings
> +
> +Required properties:
> +- compatible: Should be set to the following value
> + ti,omap3-ssi (applicable to OMAP34xx devices)
> +- ti,hwmods: Name of the hwmod associated to the controller, which
> + is "ssi".
> +- reg: Contains SSI register address range (base address and
> + length).
> +- reg-names: Contains the names of the address ranges. It's
> + expected, that "sys" and "gdd" address ranges are
> + provided.
> +- interrupts: Contains the interrupt information for the controller.
> +- interrupt-names: Contains the names of the interrupts. It's expected,
> + that "gdd_mpu" is provided.
> +- ranges Required as an empty node
> +- #address-cells Should be set to <1>
> +- #size-cells Should be set to <1>
> +
> +Each port is represented as a sub-node of the ti,omap3-ssi device.
> +
> +Required Port sub-node properties:
> +- compatible: Should be set to the following value
> + ti,omap3-ssi-port (applicable to OMAP34xx devices)
> +- reg: Contains port's register address range (base address
> + and length).
> +- reg-names: Contains the names of the address ranges. It's
> + expected, that "tx" and "rx" address ranges are
> + provided.
> +- interrupt-parent Should be a phandle for the interrupt controller
> +- interrupts: Contains the interrupt information for the port.
> +- interrupt-names: Contains the names of the interrupts. It's expected,
> + that "mpu_irq0" and "mpu_irq1" are provided.
> +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE
> + events for the port. This is an optional board-specific
> + property. If it's missing the port will not be
> + enabled.
> +
This belongs to patch which introduces SSI driver, no?
--
Regards,
Nishanth Menon
Hi,
> Is the Synchronous Serial Interface (SSI) only supported by
> OMAP34xx/OMAP35xx SoC and not by OMAP36xx/OMAP37xx SoC?
>
> I'm asking this since if SSI is supported by both we should add the
> device nodes in omap3.dtsi instead of omap34xx.dtsi.
>
> I thought that all OMAP3 SoC supported SSI and all OMAP4 SoC supported
> HSI but I guess I was wrong...
I just do not know. Information about the SSI core is not included
in the public OMAP TRM. It only lists the memory space as reserved.
Thus I only included it in OMAP34xx, which is used in Nokia N900 and
must support SSI.
-- Sebastian
On Mon, Sep 16, 2013 at 5:01 PM, Sebastian Reichel <[email protected]> wrote:
> Hi,
>
>> Is the Synchronous Serial Interface (SSI) only supported by
>> OMAP34xx/OMAP35xx SoC and not by OMAP36xx/OMAP37xx SoC?
>>
>> I'm asking this since if SSI is supported by both we should add the
>> device nodes in omap3.dtsi instead of omap34xx.dtsi.
>>
>> I thought that all OMAP3 SoC supported SSI and all OMAP4 SoC supported
>> HSI but I guess I was wrong...
>
> I just do not know. Information about the SSI core is not included
> in the public OMAP TRM. It only lists the memory space as reserved.
>
> Thus I only included it in OMAP34xx, which is used in Nokia N900 and
> must support SSI.
>
I see... hopefully someone from TI can shed some light on this.
> -- Sebastian
>
Best regards,
Javier
Hi,
On Mon, Sep 16, 2013 at 05:01:47PM +0200, Sebastian Reichel wrote:
> > Is the Synchronous Serial Interface (SSI) only supported by
> > OMAP34xx/OMAP35xx SoC and not by OMAP36xx/OMAP37xx SoC?
> >
> > I'm asking this since if SSI is supported by both we should add the
> > device nodes in omap3.dtsi instead of omap34xx.dtsi.
> >
> > I thought that all OMAP3 SoC supported SSI and all OMAP4 SoC supported
> > HSI but I guess I was wrong...
>
> I just do not know. Information about the SSI core is not included
> in the public OMAP TRM. It only lists the memory space as reserved.
>
> Thus I only included it in OMAP34xx, which is used in Nokia N900 and
> must support SSI.
I think N9 and N950 (OMAP3630) are using pretty much the same driver.
A.
On Mon, Sep 16, 2013 at 09:10:32PM +0300, Aaro Koskinen wrote:
> On Mon, Sep 16, 2013 at 05:01:47PM +0200, Sebastian Reichel wrote:
> > > Is the Synchronous Serial Interface (SSI) only supported by
> > > OMAP34xx/OMAP35xx SoC and not by OMAP36xx/OMAP37xx SoC?
> > >
> > > I'm asking this since if SSI is supported by both we should add the
> > > device nodes in omap3.dtsi instead of omap34xx.dtsi.
> > >
> > > I thought that all OMAP3 SoC supported SSI and all OMAP4 SoC supported
> > > HSI but I guess I was wrong...
> >
> > I just do not know. Information about the SSI core is not included
> > in the public OMAP TRM. It only lists the memory space as reserved.
> >
> > Thus I only included it in OMAP34xx, which is used in Nokia N900 and
> > must support SSI.
>
> I think N9 and N950 (OMAP3630) are using pretty much the same driver.
OK. I've checked the N950 kernel from [0] and it uses the same data.
I will move the data from omap34xx.dtsi to omap3.dtsi in the next
RFC.
Thanks for the hint.
[0] https://github.com/nemomobile/kernel-adaptation-n950-n9/
-- Sebastian
* Sebastian Reichel <[email protected]> [130915 13:56]:
> This patch adds an OMAP SSI driver to the HSI framework.
Thanks for working on this.
> +config OMAP_SSI
> + tristate "OMAP SSI hardware driver"
> + depends on ARCH_OMAP && HSI
> + default n
> + ---help---
> + SSI is a legacy version of HSI. It is usually used to connect
> + an application engine with a cellular modem.
> + If you say Y here, you will enable the OMAP SSI hardware driver.
You can drop the "default n" line here, it's the default.
> +/* TODO: HACK: define omap_pm_get_dev_context_loss_count, because it is defined
> + * in arch/arm/mach-omap2/omap-pm.h and thus not available via #include */
> +int omap_pm_get_dev_context_loss_count(struct device *dev);
You can drop this and related calls completely and rely on some
SSI configuration registers instead to detect if context was lost.
The reason for that is that the context loss count should be
implemented in Linux generic way if needed at all and we can leave
out a dependency to that.
If there's a chance that the context is only partially lost,
then of course something else is needed. So far I have not
hit that issue for MMC or serial at least, but you'd have to
test this with off-idle to verify it.
Regards,
Tony
On 09/15/2013 02:44 PM, Sebastian Reichel wrote:
> Add SSI device tree data for OMAP34xx and Nokia N900.
What is an "SSI" device, ...
> diff --git a/Documentation/devicetree/bindings/hsi/omap_ssi.txt b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
... and what is the "HSI" subsystem?
> +OMAP SSI controller bindings
> +
> +Required properties:
> +- compatible: Should be set to the following value
> + ti,omap3-ssi (applicable to OMAP34xx devices)
I think that'd be better phrased as:
Should include "ti,omap3-ssi".
The binding should not preclude other compatibel values being present
(e.g. a SoC-specific compatible value, to allow SoC-specific quirks to
be enabled later).
> +- ti,hwmods: Name of the hwmod associated to the controller, which
> + is "ssi".
I don't think we should add any more of that, for new bindings.
> +- reg: Contains SSI register address range (base address and
> + length).
> +- reg-names: Contains the names of the address ranges. It's
> + expected, that "sys" and "gdd" address ranges are
> + provided.
Why two entries in reg-names but only one in reg?
I think it'd be better to write:
reg-names: Contains the values "sys" and "gdd".
reg: Contains a register specifier for each entry in
reg-names.
A similar re-ordering/-wording would apply to interrupts/interrupt-names.
> +- ranges Required as an empty node
s/node/property/
Why must ranges be empty? As long as the content correctly represents
the bus setup, why does the content matter at all. How about:
ranges Represents the bus address mapping between the main
controller node and the child nodes below.
> +Each port is represented as a sub-node of the ti,omap3-ssi device.
> +
> +Required Port sub-node properties:
> +- compatible: Should be set to the following value
> + ti,omap3-ssi-port (applicable to OMAP34xx devices)
Hmm. Is it really the case that there is 1 controller with n ports? Are
the ports really dependent upon some shared resource? Couldn't the ports
be represented as separate top-level SSI controllers?
> +- interrupts: Contains the interrupt information for the port.
> +- interrupt-names: Contains the names of the interrupts. It's expected,
> + that "mpu_irq0" and "mpu_irq1" are provided.
What exactly are those interrupts? "MPU" sounds like an external
micro-controller/processor...
> +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE
> + events for the port. This is an optional board-specific
> + property. If it's missing the port will not be
> + enabled.
That also sounds like something that's a higher-level protocol, rather
than whatever low-level transport "SSI" implements. Should this be part
of a child node that represents the device attached to the SSI controller?
Does the SSI controller (or its ports) not need any clocks, resets,
regulators, ...?
Hi,
On Mon, Sep 23, 2013 at 02:35:35PM -0600, Stephen Warren wrote:
> On 09/15/2013 02:44 PM, Sebastian Reichel wrote:
> > Add SSI device tree data for OMAP34xx and Nokia N900.
>
> What is an "SSI" device, ...
Synchronous Serial Interface (SSI), which is an interface from
the OMAP3 for modem connection. It's a legacy variant of
High-speed Synchronous Serial Interface (HSI). This in turn
is a standard from MIPI:
http://www.mipi.org/specifications/high-speed-synchronous-serial-interface-hsi
>
> > diff --git a/Documentation/devicetree/bindings/hsi/omap_ssi.txt b/Documentation/devicetree/bindings/hsi/omap_ssi.txt
>
> ... and what is the "HSI" subsystem?
A framework for HSI devices living in drivers/hsi.
> > +OMAP SSI controller bindings
> > +
> > +Required properties:
> > +- compatible: Should be set to the following value
> > + ti,omap3-ssi (applicable to OMAP34xx devices)
>
> I think that'd be better phrased as:
>
> Should include "ti,omap3-ssi".
>
> The binding should not preclude other compatibel values being present
> (e.g. a SoC-specific compatible value, to allow SoC-specific quirks to
> be enabled later).
Right. Will be fixed in the next RFC.
> > +- ti,hwmods: Name of the hwmod associated to the controller, which
> > + is "ssi".
>
> I don't think we should add any more of that, for new bindings.
That basically means not adding new drivers until hwmod is completly
removed, since no new drivers not using DT are accepted anymore.
hwmod still holds some information, which are not yet mapped to DT.
> > +- reg: Contains SSI register address range (base address and
> > + length).
> > +- reg-names: Contains the names of the address ranges. It's
> > + expected, that "sys" and "gdd" address ranges are
> > + provided.
>
> Why two entries in reg-names but only one in reg?
>
> I think it'd be better to write:
>
> reg-names: Contains the values "sys" and "gdd".
> reg: Contains a register specifier for each entry in
> reg-names.
>
> A similar re-ordering/-wording would apply to interrupts/interrupt-names.
OK. Will be fixed in the next RFC.
> > +- ranges Required as an empty node
>
> s/node/property/
>
> Why must ranges be empty? As long as the content correctly represents
> the bus setup, why does the content matter at all. How about:
>
> ranges Represents the bus address mapping between the main
> controller node and the child nodes below.
OK. Will be fixed in the next RFC.
> > +Each port is represented as a sub-node of the ti,omap3-ssi device.
> > +
> > +Required Port sub-node properties:
> > +- compatible: Should be set to the following value
> > + ti,omap3-ssi-port (applicable to OMAP34xx devices)
>
> Hmm. Is it really the case that there is 1 controller with n ports?
Yes with n=2.
> Are the ports really dependent upon some shared resource?
Yes and runtime power management.
> Couldn't the ports be represented as separate top-level SSI
> controllers?
Maybe with some phandles. The current layout is cleaner IMHO.
The ports are part of the controller and actually most boards
only use one of them.
In the original driver only the controller hat platform data
with memory areas called "port1_rx" etc.
> > +- interrupts: Contains the interrupt information for the port.
> > +- interrupt-names: Contains the names of the interrupts. It's expected,
> > + that "mpu_irq0" and "mpu_irq1" are provided.
>
> What exactly are those interrupts? "MPU" sounds like an external
> micro-controller/processor...
>
> > +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE
> > + events for the port. This is an optional board-specific
> > + property. If it's missing the port will not be
> > + enabled.
>
> That also sounds like something that's a higher-level protocol, rather
> than whatever low-level transport "SSI" implements. Should this be part
> of a child node that represents the device attached to the SSI controller?
Both the interrupts and the cawake-gpio are used as irqs for
starting data transfers. As far as I understand it none of
them are specific to the attached device.
NOTE: I do not have documentation for the chip. I just ported the
old patch from Carlos Chinea (who developed the initial driver for
Nokia) to the new kernel frameworks, since I want to use the
modem of my Nokia N900.
> Does the SSI controller (or its ports) not need any clocks, resets,
> regulators, ...?
The only other stuff needed is taken care of by hwmod, which can
be seen in this patch:
https://lkml.org/lkml/2013/9/15/97
As far as I understand it, this kind of information is not yet
supported by DT on OMAP boards. On the other hand new OMAP drivers
are not allowed to add further board code, so temporarily the
ti,hwmod hack must be used.
-- Sebastian
On 09/23/2013 05:46 PM, Sebastian Reichel wrote:
> Hi,
>
> On Mon, Sep 23, 2013 at 02:35:35PM -0600, Stephen Warren wrote:
>> On 09/15/2013 02:44 PM, Sebastian Reichel wrote:
>>> Add SSI device tree data for OMAP34xx and Nokia N900.
...
>>> +- ti,hwmods: Name of the hwmod associated to the controller,
>>> which + is "ssi".
>>
>> I don't think we should add any more of that, for new bindings.
>
> That basically means not adding new drivers until hwmod is
> completly removed, since no new drivers not using DT are accepted
> anymore.
>
> hwmod still holds some information, which are not yet mapped to
> DT.
Tony, is defining hwmod properties for new OMAP bindings what everyone
is currently doing? I'm not sure how that will work with a stable DT
ABI...
I wonder if it makes sense not to define the ti,hwmods property in the
binding document (so it doesn't become part of the ABI), but put it
into the DTS file simply to make the current Linux code work? I'm not
sure if that's any better though.
>>> +Required Port sub-node properties: +- compatible: Should be
>>> set to the following value +
>>> ti,omap3-ssi-port (applicable to OMAP34xx devices)
>>
>> Hmm. Is it really the case that there is 1 controller with n
>> ports?
>
> Yes with n=2.
>
>> Are the ports really dependent upon some shared resource?
>
> Yes and runtime power management.
>
>> Couldn't the ports be represented as separate top-level SSI
>> controllers?
>
> Maybe with some phandles. The current layout is cleaner IMHO. The
> ports are part of the controller and actually most boards only use
> one of them.
>
> In the original driver only the controller hat platform data with
> memory areas called "port1_rx" etc.
If the HW block really does include 2 ports, then representing it as a
single node in DT is fine; I was just making sure.
>>> +- interrupts: Contains the interrupt information for the
>>> port. +- interrupt-names: Contains the names of the interrupts.
>>> It's expected, + that "mpu_irq0" and "mpu_irq1" are
>>> provided.
>>
>> What exactly are those interrupts? "MPU" sounds like an external
>> micro-controller/processor...
>>
>>> +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to
>>> signify CAWAKE + events for the port. This is an optional
>>> board-specific + property. If it's missing the port will not
>>> be + enabled.
>>
>> That also sounds like something that's a higher-level protocol,
>> rather than whatever low-level transport "SSI" implements. Should
>> this be part of a child node that represents the device attached
>> to the SSI controller?
>
> Both the interrupts and the cawake-gpio are used as irqs for
> starting data transfers. As far as I understand it none of them are
> specific to the attached device.
But are the interrupts and GPIO actually part of the HSI protocol
itself, or something layered on top? While your particular board has
them wired up, is it strictly necessary for all boards using HSI to
have those IRQs/GPIOs?
>> Does the SSI controller (or its ports) not need any clocks,
>> resets, regulators, ...?
>
> The only other stuff needed is taken care of by hwmod, which can be
> seen in this patch:
>
> https://lkml.org/lkml/2013/9/15/97
It would be best to completely define the DT binding so that all
required clocks etc. are already present in the DT. That way, the DT
ABI won't change once people stop using hwmods. Tony, is that possible
on OMAP at present, irrespective of whether those e.g. clock
properties will actually be used by Linux?
* Stephen Warren <[email protected]> [130924 13:03]:
> On 09/23/2013 05:46 PM, Sebastian Reichel wrote:
> > Hi,
> >
> > On Mon, Sep 23, 2013 at 02:35:35PM -0600, Stephen Warren wrote:
> >> On 09/15/2013 02:44 PM, Sebastian Reichel wrote:
> >>> Add SSI device tree data for OMAP34xx and Nokia N900.
>
> ...
> >>> +- ti,hwmods: Name of the hwmod associated to the controller,
> >>> which + is "ssi".
> >>
> >> I don't think we should add any more of that, for new bindings.
> >
> > That basically means not adding new drivers until hwmod is
> > completly removed, since no new drivers not using DT are accepted
> > anymore.
> >
> > hwmod still holds some information, which are not yet mapped to
> > DT.
>
> Tony, is defining hwmod properties for new OMAP bindings what everyone
> is currently doing? I'm not sure how that will work with a stable DT
> ABI...
>
> I wonder if it makes sense not to define the ti,hwmods property in the
> binding document (so it doesn't become part of the ABI), but put it
> into the DTS file simply to make the current Linux code work? I'm not
> sure if that's any better though.
There are still pieces of information in hwmod that is needed for
PM to work for things like device autoidle and reset. The plan is
to describe those with Linux generic bindings, but that's going
to take a while.
Clearly once we have those bindings, ti,hwmods is not needed and
then the problem is how to support old .dtb files..
> It would be best to completely define the DT binding so that all
> required clocks etc. are already present in the DT. That way, the DT
> ABI won't change once people stop using hwmods. Tony, is that possible
> on OMAP at present, irrespective of whether those e.g. clock
> properties will actually be used by Linux?
Unfortunately not doable yet. For v3.13 we should have the
clock bindings in place, but quite a bit of work still
remains for the remaining hwmod pieces.
Considering all this, we may be best off dropping ti,hwmods
binding completely, and populate it based on DT auxdata or
something similar. That means that old .dtb files won't
work once we populate things from DT, but at least the binding
issue would be sorted out.
If anybody has better suggestions, let me know.
Regards,
Tony