From: Greg Kroah-Hartman <[email protected]>
This is the start of the stable review cycle for the 4.19.180 release.
There are 39 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri, 12 Mar 2021 13:23:09 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.180-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.180-rc1
Jisheng Zhang <[email protected]>
mmc: sdhci-of-dwcmshc: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN
AngeloGioacchino Del Regno <[email protected]>
drm/msm/a5xx: Remove overwriting A5XX_PC_DBG_ECO_CNTL register
Aswath Govindraju <[email protected]>
misc: eeprom_93xx46: Add quirk to support Microchip 93LC46B eeprom
Bjorn Helgaas <[email protected]>
PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller
Chris Chiu <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for ARCHOS Cesium 140
Daniel Lee Kruse <[email protected]>
media: cx23885: add more quirks for reset DMA on some AMD IOMMU
Ethan Warth <[email protected]>
HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube Adapter
Hans de Goede <[email protected]>
platform/x86: acer-wmi: Add ACER_CAP_KBD_DOCK quirk for the Aspire Switch 10E SW3-016
Hans de Goede <[email protected]>
platform/x86: acer-wmi: Add support for SW_TABLET_MODE on Switch devices
Hans de Goede <[email protected]>
platform/x86: acer-wmi: Add ACER_CAP_SET_FUNCTION_MODE capability flag
Hans de Goede <[email protected]>
platform/x86: acer-wmi: Add new force_caps module parameter
Hans de Goede <[email protected]>
platform/x86: acer-wmi: Cleanup accelerometer device handling
Hans de Goede <[email protected]>
platform/x86: acer-wmi: Cleanup ACER_CAP_FOO defines
Tsuchiya Yuto <[email protected]>
mwifiex: pcie: skip cancel_work_sync() on reset failure path
Andrey Ryabinin <[email protected]>
iommu/amd: Fix sleeping in atomic in increase_address_space()
Jeffle Xu <[email protected]>
dm table: fix zoned iterate_devices based device capability checks
Jeffle Xu <[email protected]>
dm table: fix DAX iterate_devices based device capability checks
Jeffle Xu <[email protected]>
dm table: fix iterate_devices based device capability checks
Alexander Lobakin <[email protected]>
net: dsa: add GRO support via gro_cells
Heiner Kallweit <[email protected]>
r8169: fix resuming from suspend on RTL8105e if machine runs on battery
Milan Broz <[email protected]>
dm verity: fix FEC for RS roots unaligned to block size
Dan Carpenter <[email protected]>
rsxx: Return -EFAULT if copy_to_user() fails
Julian Braha <[email protected]>
RDMA/rxe: Fix missing kconfig dependency on CRYPTO
Colin Ian King <[email protected]>
ALSA: ctxfi: cthw20k2: fix mask on conf to allow 4 bits
Hannes Reinecke <[email protected]>
virtio-blk: modernize sysfs attribute creation
Hannes Reinecke <[email protected]>
zram: register default groups with device_add_disk()
Hannes Reinecke <[email protected]>
aoe: register default groups with device_add_disk()
Hannes Reinecke <[email protected]>
nvme: register ns_id attributes as default sysfs groups
Hannes Reinecke <[email protected]>
block: genhd: add 'groups' argument to device_add_disk
Jeffle Xu <[email protected]>
Revert "zram: close udev startup race condition as default groups"
Antonio Borneo <[email protected]>
usbip: tools: fix build error for multiple definition
Kevin Wang <[email protected]>
drm/amdgpu: fix parameter error of RREG32_PCIE() in amdgpu_regs_pcie
Mikulas Patocka <[email protected]>
dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
Rafael J. Wysocki <[email protected]>
PM: runtime: Update device status before letting suppliers suspend
Nikolay Borisov <[email protected]>
btrfs: unlock extents in btrfs_zero_range in case of quota reservation errors
Nikolay Borisov <[email protected]>
btrfs: free correct amount of space in btrfs_delayed_inode_reserve_metadata
Dan Carpenter <[email protected]>
btrfs: validate qgroup inherit for SNAP_CREATE_V2 ioctl
Ira Weiny <[email protected]>
btrfs: fix raid6 qstripe kmap
David Sterba <[email protected]>
btrfs: raid56: simplify tracking of Q stripe presence
-------------
Diffstat:
Makefile | 4 +-
arch/um/drivers/ubd_kern.c | 2 +-
block/genhd.c | 19 ++-
drivers/base/power/runtime.c | 62 ++++++----
drivers/block/aoe/aoe.h | 1 -
drivers/block/aoe/aoeblk.c | 21 ++--
drivers/block/aoe/aoedev.c | 1 -
drivers/block/floppy.c | 2 +-
drivers/block/mtip32xx/mtip32xx.c | 2 +-
drivers/block/ps3disk.c | 2 +-
drivers/block/ps3vram.c | 2 +-
drivers/block/rsxx/core.c | 8 +-
drivers/block/rsxx/dev.c | 2 +-
drivers/block/skd_main.c | 2 +-
drivers/block/sunvdc.c | 2 +-
drivers/block/virtio_blk.c | 68 ++++++-----
drivers/block/xen-blkfront.c | 2 +-
drivers/block/zram/zram_drv.c | 4 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 4 +-
drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 2 -
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-mf.c | 2 +
drivers/hid/hid-quirks.c | 2 +
drivers/ide/ide-cd.c | 2 +-
drivers/ide/ide-gd.c | 2 +-
drivers/infiniband/sw/rxe/Kconfig | 1 +
drivers/iommu/amd_iommu.c | 10 +-
drivers/md/dm-bufio.c | 4 +
drivers/md/dm-table.c | 174 ++++++++++++----------------
drivers/md/dm-verity-fec.c | 23 ++--
drivers/media/pci/cx23885/cx23885-core.c | 4 +
drivers/memstick/core/ms_block.c | 2 +-
drivers/memstick/core/mspro_block.c | 2 +-
drivers/misc/eeprom/eeprom_93xx46.c | 15 +++
drivers/mmc/core/block.c | 2 +-
drivers/mmc/host/sdhci-of-dwcmshc.c | 1 +
drivers/mtd/mtd_blkdevs.c | 2 +-
drivers/net/ethernet/realtek/r8169.c | 2 +
drivers/net/wireless/marvell/mwifiex/pcie.c | 18 ++-
drivers/net/wireless/marvell/mwifiex/pcie.h | 2 +
drivers/nvdimm/blk.c | 2 +-
drivers/nvdimm/btt.c | 2 +-
drivers/nvdimm/pmem.c | 2 +-
drivers/nvme/host/core.c | 21 ++--
drivers/nvme/host/lightnvm.c | 105 +++++++----------
drivers/nvme/host/multipath.c | 15 +--
drivers/nvme/host/nvme.h | 10 +-
drivers/pci/quirks.c | 3 +
drivers/platform/x86/acer-wmi.c | 169 ++++++++++++++++++++++-----
drivers/s390/block/dasd_genhd.c | 2 +-
drivers/s390/block/dcssblk.c | 2 +-
drivers/s390/block/scm_blk.c | 2 +-
drivers/scsi/sd.c | 2 +-
drivers/scsi/sr.c | 2 +-
fs/btrfs/delayed-inode.c | 2 +-
fs/btrfs/file.c | 5 +-
fs/btrfs/ioctl.c | 19 ++-
fs/btrfs/raid56.c | 58 ++++------
include/linux/eeprom_93xx46.h | 2 +
include/linux/genhd.h | 5 +-
net/dsa/Kconfig | 1 +
net/dsa/dsa.c | 2 +-
net/dsa/dsa_priv.h | 3 +
net/dsa/slave.c | 10 +-
sound/pci/ctxfi/cthw20k2.c | 2 +-
sound/soc/intel/boards/bytcr_rt5640.c | 12 ++
tools/usb/usbip/libsrc/usbip_host_common.c | 2 +-
67 files changed, 556 insertions(+), 389 deletions(-)
From: Greg Kroah-Hartman <[email protected]>
From: Ira Weiny <[email protected]>
commit d70cef0d46729808dc53f145372c02b145c92604 upstream.
When a qstripe is required an extra page is allocated and mapped. There
were 3 problems:
1) There is no corresponding call of kunmap() for the qstripe page.
2) There is no reason to map the qstripe page more than once if the
number of bits set in rbio->dbitmap is greater than one.
3) There is no reason to map the parity page and unmap it each time
through the loop.
The page memory can continue to be reused with a single mapping on each
iteration by raid6_call.gen_syndrome() without remapping. So map the
page for the duration of the loop.
Similarly, improve the algorithm by mapping the parity page just 1 time.
Fixes: 5a6ac9eacb49 ("Btrfs, raid56: support parity scrub on raid56")
CC: [email protected] # 4.4.x: c17af96554a8: btrfs: raid56: simplify tracking of Q stripe presence
CC: [email protected] # 4.4.x
Signed-off-by: Ira Weiny <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/raid56.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
--- a/fs/btrfs/raid56.c
+++ b/fs/btrfs/raid56.c
@@ -2375,16 +2375,21 @@ static noinline void finish_parity_scrub
SetPageUptodate(p_page);
if (has_qstripe) {
+ /* RAID6, allocate and map temp space for the Q stripe */
q_page = alloc_page(GFP_NOFS | __GFP_HIGHMEM);
if (!q_page) {
__free_page(p_page);
goto cleanup;
}
SetPageUptodate(q_page);
+ pointers[rbio->real_stripes - 1] = kmap(q_page);
}
atomic_set(&rbio->error, 0);
+ /* Map the parity stripe just once */
+ pointers[nr_data] = kmap(p_page);
+
for_each_set_bit(pagenr, rbio->dbitmap, rbio->stripe_npages) {
struct page *p;
void *parity;
@@ -2394,16 +2399,8 @@ static noinline void finish_parity_scrub
pointers[stripe] = kmap(p);
}
- /* then add the parity stripe */
- pointers[stripe++] = kmap(p_page);
-
if (has_qstripe) {
- /*
- * raid6, add the qstripe and call the
- * library function to fill in our p/q
- */
- pointers[stripe++] = kmap(q_page);
-
+ /* RAID6, call the library function to fill in our P/Q */
raid6_call.gen_syndrome(rbio->real_stripes, PAGE_SIZE,
pointers);
} else {
@@ -2424,12 +2421,14 @@ static noinline void finish_parity_scrub
for (stripe = 0; stripe < nr_data; stripe++)
kunmap(page_in_rbio(rbio, stripe, pagenr, 0));
- kunmap(p_page);
}
+ kunmap(p_page);
__free_page(p_page);
- if (q_page)
+ if (q_page) {
+ kunmap(q_page);
__free_page(q_page);
+ }
writeback:
/*
From: Greg Kroah-Hartman <[email protected]>
From: Dan Carpenter <[email protected]>
commit 5011c5a663b9c6d6aff3d394f11049b371199627 upstream.
The problem is we're copying "inherit" from user space but we don't
necessarily know that we're copying enough data for a 64 byte
struct. Then the next problem is that 'inherit' has a variable size
array at the end, and we have to verify that array is the size we
expected.
Fixes: 6f72c7e20dba ("Btrfs: add qgroup inheritance")
CC: [email protected] # 4.4+
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/ioctl.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1842,7 +1842,10 @@ static noinline int btrfs_ioctl_snap_cre
if (vol_args->flags & BTRFS_SUBVOL_RDONLY)
readonly = true;
if (vol_args->flags & BTRFS_SUBVOL_QGROUP_INHERIT) {
- if (vol_args->size > PAGE_SIZE) {
+ u64 nums;
+
+ if (vol_args->size < sizeof(*inherit) ||
+ vol_args->size > PAGE_SIZE) {
ret = -EINVAL;
goto free_args;
}
@@ -1851,6 +1854,20 @@ static noinline int btrfs_ioctl_snap_cre
ret = PTR_ERR(inherit);
goto free_args;
}
+
+ if (inherit->num_qgroups > PAGE_SIZE ||
+ inherit->num_ref_copies > PAGE_SIZE ||
+ inherit->num_excl_copies > PAGE_SIZE) {
+ ret = -EINVAL;
+ goto free_inherit;
+ }
+
+ nums = inherit->num_qgroups + 2 * inherit->num_ref_copies +
+ 2 * inherit->num_excl_copies;
+ if (vol_args->size != struct_size(inherit, qgroups, nums)) {
+ ret = -EINVAL;
+ goto free_inherit;
+ }
}
ret = btrfs_ioctl_snap_create_transid(file, vol_args->name,
From: Greg Kroah-Hartman <[email protected]>
From: Rafael J. Wysocki <[email protected]>
commit 44cc89f764646b2f1f2ea5d1a08b230131707851 upstream.
Because the PM-runtime status of the device is not updated in
__rpm_callback(), attempts to suspend the suppliers of the given
device triggered by rpm_put_suppliers() called by it may fail.
Fix this by making __rpm_callback() update the device's status to
RPM_SUSPENDED before calling rpm_put_suppliers() if the current
status of the device is RPM_SUSPENDING and the callback just invoked
by it has returned 0 (success).
While at it, modify the code in __rpm_callback() to always check
the device's PM-runtime status under its PM lock.
Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/
Fixes: 21d5c57b3726 ("PM / runtime: Use device links")
Reported-by: Elaine Zhang <[email protected]>
Diagnosed-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Elaine Zhang <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Cc: 4.10+ <[email protected]> # 4.10+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/runtime.c | 62 +++++++++++++++++++++++++------------------
1 file changed, 37 insertions(+), 25 deletions(-)
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -304,22 +304,22 @@ static void rpm_put_suppliers(struct dev
static int __rpm_callback(int (*cb)(struct device *), struct device *dev)
__releases(&dev->power.lock) __acquires(&dev->power.lock)
{
- int retval, idx;
bool use_links = dev->power.links_count > 0;
+ bool get = false;
+ int retval, idx;
+ bool put;
if (dev->power.irq_safe) {
spin_unlock(&dev->power.lock);
+ } else if (!use_links) {
+ spin_unlock_irq(&dev->power.lock);
} else {
+ get = dev->power.runtime_status == RPM_RESUMING;
+
spin_unlock_irq(&dev->power.lock);
- /*
- * Resume suppliers if necessary.
- *
- * The device's runtime PM status cannot change until this
- * routine returns, so it is safe to read the status outside of
- * the lock.
- */
- if (use_links && dev->power.runtime_status == RPM_RESUMING) {
+ /* Resume suppliers if necessary. */
+ if (get) {
idx = device_links_read_lock();
retval = rpm_get_suppliers(dev);
@@ -334,24 +334,36 @@ static int __rpm_callback(int (*cb)(stru
if (dev->power.irq_safe) {
spin_lock(&dev->power.lock);
- } else {
- /*
- * If the device is suspending and the callback has returned
- * success, drop the usage counters of the suppliers that have
- * been reference counted on its resume.
- *
- * Do that if resume fails too.
- */
- if (use_links
- && ((dev->power.runtime_status == RPM_SUSPENDING && !retval)
- || (dev->power.runtime_status == RPM_RESUMING && retval))) {
- idx = device_links_read_lock();
+ return retval;
+ }
- fail:
- rpm_put_suppliers(dev);
+ spin_lock_irq(&dev->power.lock);
- device_links_read_unlock(idx);
- }
+ if (!use_links)
+ return retval;
+
+ /*
+ * If the device is suspending and the callback has returned success,
+ * drop the usage counters of the suppliers that have been reference
+ * counted on its resume.
+ *
+ * Do that if the resume fails too.
+ */
+ put = dev->power.runtime_status == RPM_SUSPENDING && !retval;
+ if (put)
+ __update_runtime_status(dev, RPM_SUSPENDED);
+ else
+ put = get && retval;
+
+ if (put) {
+ spin_unlock_irq(&dev->power.lock);
+
+ idx = device_links_read_lock();
+
+fail:
+ rpm_put_suppliers(dev);
+
+ device_links_read_unlock(idx);
spin_lock_irq(&dev->power.lock);
}
From: Greg Kroah-Hartman <[email protected]>
From: Mikulas Patocka <[email protected]>
commit a14e5ec66a7a66e57b24e2469f9212a78460207e upstream.
dm_bufio_get_device_size returns the device size in blocks. Before
returning the value, we must subtract the nubmer of starting
sectors. The number of starting sectors may not be divisible by block
size.
Note that currently, no target is using dm_bufio_set_sector_offset and
dm_bufio_get_device_size simultaneously, so this change has no effect.
However, an upcoming dm-verity-fec fix needs this change.
Signed-off-by: Mikulas Patocka <[email protected]>
Reviewed-by: Milan Broz <[email protected]>
Cc: [email protected]
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-bufio.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -1463,6 +1463,10 @@ EXPORT_SYMBOL_GPL(dm_bufio_get_block_siz
sector_t dm_bufio_get_device_size(struct dm_bufio_client *c)
{
sector_t s = i_size_read(c->bdev->bd_inode) >> SECTOR_SHIFT;
+ if (s >= c->start)
+ s -= c->start;
+ else
+ s = 0;
if (likely(c->sectors_per_block_bits >= 0))
s >>= c->sectors_per_block_bits;
else
From: Greg Kroah-Hartman <[email protected]>
From: Antonio Borneo <[email protected]>
commit d5efc2e6b98fe661dbd8dd0d5d5bfb961728e57a upstream.
With GCC 10, building usbip triggers error for multiple definition
of 'udev_context', in:
- libsrc/vhci_driver.c:18 and
- libsrc/usbip_host_common.c:27.
Declare as extern the definition in libsrc/usbip_host_common.c.
Signed-off-by: Antonio Borneo <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Petr Štetiar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/usb/usbip/libsrc/usbip_host_common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/usb/usbip/libsrc/usbip_host_common.c
+++ b/tools/usb/usbip/libsrc/usbip_host_common.c
@@ -35,7 +35,7 @@
#include "list.h"
#include "sysfs_utils.h"
-struct udev *udev_context;
+extern struct udev *udev_context;
static int32_t read_attr_usbip_status(struct usbip_usb_device *udev)
{
From: Greg Kroah-Hartman <[email protected]>
From: Jeffle Xu <[email protected]>
This reverts commit 9e07f4e243791e00a4086ad86e573705cf7b2c65.
The original commit is actually a "merged" fix of [1] and [2], as
described in [3]. Since now we have more fixes that rely on [1], revert
this commit first, and then get the original [1] and [2] merged.
[1] fef912bf860e, block: genhd: add 'groups' argument to device_add_disk
[2] 98af4d4df889, zram: register default groups with device_add_disk()
[3] https://www.spinics.net/lists/stable/msg442196.html
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/zram/zram_drv.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -1644,11 +1644,6 @@ static const struct attribute_group zram
.attrs = zram_disk_attrs,
};
-static const struct attribute_group *zram_disk_attr_groups[] = {
- &zram_disk_attr_group,
- NULL,
-};
-
/*
* Allocate and initialize new zram device. the function returns
* '>= 0' device_id upon success, and negative value otherwise.
@@ -1729,15 +1724,24 @@ static int zram_add(void)
zram->disk->queue->backing_dev_info->capabilities |=
(BDI_CAP_STABLE_WRITES | BDI_CAP_SYNCHRONOUS_IO);
- disk_to_dev(zram->disk)->groups = zram_disk_attr_groups;
add_disk(zram->disk);
+ ret = sysfs_create_group(&disk_to_dev(zram->disk)->kobj,
+ &zram_disk_attr_group);
+ if (ret < 0) {
+ pr_err("Error creating sysfs group for device %d\n",
+ device_id);
+ goto out_free_disk;
+ }
strlcpy(zram->compressor, default_compressor, sizeof(zram->compressor));
zram_debugfs_register(zram);
pr_info("Added device: %s\n", zram->disk->disk_name);
return device_id;
+out_free_disk:
+ del_gendisk(zram->disk);
+ put_disk(zram->disk);
out_free_queue:
blk_cleanup_queue(queue);
out_free_idr:
@@ -1766,6 +1770,16 @@ static int zram_remove(struct zram *zram
mutex_unlock(&bdev->bd_mutex);
zram_debugfs_unregister(zram);
+ /*
+ * Remove sysfs first, so no one will perform a disksize
+ * store while we destroy the devices. This also helps during
+ * hot_remove -- zram_reset_device() is the last holder of
+ * ->init_lock, no later/concurrent disksize_store() or any
+ * other sysfs handlers are possible.
+ */
+ sysfs_remove_group(&disk_to_dev(zram->disk)->kobj,
+ &zram_disk_attr_group);
+
/* Make sure all the pending I/O are finished */
fsync_bdev(bdev);
zram_reset_device(zram);
From: Greg Kroah-Hartman <[email protected]>
From: Hannes Reinecke <[email protected]>
commit fef912bf860e8e7e48a2bfb978a356bba743a8b7 upstream.
Update device_add_disk() to take an 'groups' argument so that
individual drivers can register a device with additional sysfs
attributes.
This avoids race condition the driver would otherwise have if these
groups were to be created with sysfs_add_groups().
Signed-off-by: Martin Wilck <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/um/drivers/ubd_kern.c | 2 +-
block/genhd.c | 19 ++++++++++++++-----
drivers/block/floppy.c | 2 +-
drivers/block/mtip32xx/mtip32xx.c | 2 +-
drivers/block/ps3disk.c | 2 +-
drivers/block/ps3vram.c | 2 +-
drivers/block/rsxx/dev.c | 2 +-
drivers/block/skd_main.c | 2 +-
drivers/block/sunvdc.c | 2 +-
drivers/block/virtio_blk.c | 2 +-
drivers/block/xen-blkfront.c | 2 +-
drivers/ide/ide-cd.c | 2 +-
drivers/ide/ide-gd.c | 2 +-
drivers/memstick/core/ms_block.c | 2 +-
drivers/memstick/core/mspro_block.c | 2 +-
drivers/mmc/core/block.c | 2 +-
drivers/mtd/mtd_blkdevs.c | 2 +-
drivers/nvdimm/blk.c | 2 +-
drivers/nvdimm/btt.c | 2 +-
drivers/nvdimm/pmem.c | 2 +-
drivers/nvme/host/core.c | 2 +-
drivers/nvme/host/multipath.c | 2 +-
drivers/s390/block/dasd_genhd.c | 2 +-
drivers/s390/block/dcssblk.c | 2 +-
drivers/s390/block/scm_blk.c | 2 +-
drivers/scsi/sd.c | 2 +-
drivers/scsi/sr.c | 2 +-
include/linux/genhd.h | 5 +++--
28 files changed, 43 insertions(+), 33 deletions(-)
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -891,7 +891,7 @@ static int ubd_disk_register(int major,
disk->private_data = &ubd_devs[unit];
disk->queue = ubd_devs[unit].queue;
- device_add_disk(parent, disk);
+ device_add_disk(parent, disk, NULL);
*disk_out = disk;
return 0;
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -582,7 +582,8 @@ static int exact_lock(dev_t devt, void *
return 0;
}
-static void register_disk(struct device *parent, struct gendisk *disk)
+static void register_disk(struct device *parent, struct gendisk *disk,
+ const struct attribute_group **groups)
{
struct device *ddev = disk_to_dev(disk);
struct block_device *bdev;
@@ -597,6 +598,10 @@ static void register_disk(struct device
/* delay uevents, until we scanned partition table */
dev_set_uevent_suppress(ddev, 1);
+ if (groups) {
+ WARN_ON(ddev->groups);
+ ddev->groups = groups;
+ }
if (device_add(ddev))
return;
if (!sysfs_deprecated) {
@@ -664,6 +669,7 @@ exit:
* __device_add_disk - add disk information to kernel list
* @parent: parent device for the disk
* @disk: per-device partitioning information
+ * @groups: Additional per-device sysfs groups
* @register_queue: register the queue if set to true
*
* This function registers the partitioning information in @disk
@@ -672,6 +678,7 @@ exit:
* FIXME: error handling
*/
static void __device_add_disk(struct device *parent, struct gendisk *disk,
+ const struct attribute_group **groups,
bool register_queue)
{
dev_t devt;
@@ -715,7 +722,7 @@ static void __device_add_disk(struct dev
blk_register_region(disk_devt(disk), disk->minors, NULL,
exact_match, exact_lock, disk);
}
- register_disk(parent, disk);
+ register_disk(parent, disk, groups);
if (register_queue)
blk_register_queue(disk);
@@ -729,15 +736,17 @@ static void __device_add_disk(struct dev
blk_integrity_add(disk);
}
-void device_add_disk(struct device *parent, struct gendisk *disk)
+void device_add_disk(struct device *parent, struct gendisk *disk,
+ const struct attribute_group **groups)
+
{
- __device_add_disk(parent, disk, true);
+ __device_add_disk(parent, disk, groups, true);
}
EXPORT_SYMBOL(device_add_disk);
void device_add_disk_no_queue_reg(struct device *parent, struct gendisk *disk)
{
- __device_add_disk(parent, disk, false);
+ __device_add_disk(parent, disk, NULL, false);
}
EXPORT_SYMBOL(device_add_disk_no_queue_reg);
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4714,7 +4714,7 @@ static int __init do_floppy_init(void)
/* to be cleaned up... */
disks[drive]->private_data = (void *)(long)drive;
disks[drive]->flags |= GENHD_FL_REMOVABLE;
- device_add_disk(&floppy_device[drive].dev, disks[drive]);
+ device_add_disk(&floppy_device[drive].dev, disks[drive], NULL);
}
return 0;
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -3861,7 +3861,7 @@ skip_create_disk:
set_capacity(dd->disk, capacity);
/* Enable the block device and add it to /dev */
- device_add_disk(&dd->pdev->dev, dd->disk);
+ device_add_disk(&dd->pdev->dev, dd->disk, NULL);
dd->bdev = bdget_disk(dd->disk, 0);
/*
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -499,7 +499,7 @@ static int ps3disk_probe(struct ps3_syst
gendisk->disk_name, priv->model, priv->raw_capacity >> 11,
get_capacity(gendisk) >> 11);
- device_add_disk(&dev->sbd.core, gendisk);
+ device_add_disk(&dev->sbd.core, gendisk, NULL);
return 0;
fail_cleanup_queue:
--- a/drivers/block/ps3vram.c
+++ b/drivers/block/ps3vram.c
@@ -769,7 +769,7 @@ static int ps3vram_probe(struct ps3_syst
dev_info(&dev->core, "%s: Using %lu MiB of GPU memory\n",
gendisk->disk_name, get_capacity(gendisk) >> 11);
- device_add_disk(&dev->core, gendisk);
+ device_add_disk(&dev->core, gendisk, NULL);
return 0;
fail_cleanup_queue:
--- a/drivers/block/rsxx/dev.c
+++ b/drivers/block/rsxx/dev.c
@@ -226,7 +226,7 @@ int rsxx_attach_dev(struct rsxx_cardinfo
set_capacity(card->gendisk, card->size8 >> 9);
else
set_capacity(card->gendisk, 0);
- device_add_disk(CARD_TO_DEV(card), card->gendisk);
+ device_add_disk(CARD_TO_DEV(card), card->gendisk, NULL);
card->bdev_attached = 1;
}
--- a/drivers/block/skd_main.c
+++ b/drivers/block/skd_main.c
@@ -3104,7 +3104,7 @@ static int skd_bdev_getgeo(struct block_
static int skd_bdev_attach(struct device *parent, struct skd_device *skdev)
{
dev_dbg(&skdev->pdev->dev, "add_disk\n");
- device_add_disk(parent, skdev->disk);
+ device_add_disk(parent, skdev->disk, NULL);
return 0;
}
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -862,7 +862,7 @@ static int probe_disk(struct vdc_port *p
port->vdisk_size, (port->vdisk_size >> (20 - 9)),
port->vio.ver.major, port->vio.ver.minor);
- device_add_disk(&port->vio.vdev->dev, g);
+ device_add_disk(&port->vio.vdev->dev, g, NULL);
return 0;
}
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -858,7 +858,7 @@ static int virtblk_probe(struct virtio_d
virtblk_update_capacity(vblk, false);
virtio_device_ready(vdev);
- device_add_disk(&vdev->dev, vblk->disk);
+ device_add_disk(&vdev->dev, vblk->disk, NULL);
err = device_create_file(disk_to_dev(vblk->disk), &dev_attr_serial);
if (err)
goto out_del_disk;
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -2422,7 +2422,7 @@ static void blkfront_connect(struct blkf
for (i = 0; i < info->nr_rings; i++)
kick_pending_request_queues(&info->rinfo[i]);
- device_add_disk(&info->xbdev->dev, info->gd);
+ device_add_disk(&info->xbdev->dev, info->gd, NULL);
info->is_ready = 1;
return;
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1784,7 +1784,7 @@ static int ide_cd_probe(ide_drive_t *dri
ide_cd_read_toc(drive);
g->fops = &idecd_ops;
g->flags |= GENHD_FL_REMOVABLE | GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE;
- device_add_disk(&drive->gendev, g);
+ device_add_disk(&drive->gendev, g, NULL);
return 0;
out_free_disk:
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -416,7 +416,7 @@ static int ide_gd_probe(ide_drive_t *dri
if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
g->flags = GENHD_FL_REMOVABLE;
g->fops = &ide_gd_ops;
- device_add_disk(&drive->gendev, g);
+ device_add_disk(&drive->gendev, g, NULL);
return 0;
out_free_disk:
--- a/drivers/memstick/core/ms_block.c
+++ b/drivers/memstick/core/ms_block.c
@@ -2146,7 +2146,7 @@ static int msb_init_disk(struct memstick
set_disk_ro(msb->disk, 1);
msb_start(card);
- device_add_disk(&card->dev, msb->disk);
+ device_add_disk(&card->dev, msb->disk, NULL);
dbg("Disk added");
return 0;
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -1236,7 +1236,7 @@ static int mspro_block_init_disk(struct
set_capacity(msb->disk, capacity);
dev_dbg(&card->dev, "capacity set %ld\n", capacity);
- device_add_disk(&card->dev, msb->disk);
+ device_add_disk(&card->dev, msb->disk, NULL);
msb->active = 1;
return 0;
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -2671,7 +2671,7 @@ static int mmc_add_disk(struct mmc_blk_d
int ret;
struct mmc_card *card = md->queue.card;
- device_add_disk(md->parent, md->disk);
+ device_add_disk(md->parent, md->disk, NULL);
md->force_ro.show = force_ro_show;
md->force_ro.store = force_ro_store;
sysfs_attr_init(&md->force_ro.attr);
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -447,7 +447,7 @@ int add_mtd_blktrans_dev(struct mtd_blkt
if (new->readonly)
set_disk_ro(gd, 1);
- device_add_disk(&new->mtd->dev, gd);
+ device_add_disk(&new->mtd->dev, gd, NULL);
if (new->disk_attributes) {
ret = sysfs_create_group(&disk_to_dev(gd)->kobj,
--- a/drivers/nvdimm/blk.c
+++ b/drivers/nvdimm/blk.c
@@ -290,7 +290,7 @@ static int nsblk_attach_disk(struct nd_n
}
set_capacity(disk, available_disk_size >> SECTOR_SHIFT);
- device_add_disk(dev, disk);
+ device_add_disk(dev, disk, NULL);
revalidate_disk(disk);
return 0;
}
--- a/drivers/nvdimm/btt.c
+++ b/drivers/nvdimm/btt.c
@@ -1565,7 +1565,7 @@ static int btt_blk_init(struct btt *btt)
}
}
set_capacity(btt->btt_disk, btt->nlba * btt->sector_size >> 9);
- device_add_disk(&btt->nd_btt->dev, btt->btt_disk);
+ device_add_disk(&btt->nd_btt->dev, btt->btt_disk, NULL);
btt->nd_btt->size = btt->nlba * (u64)btt->sector_size;
revalidate_disk(btt->btt_disk);
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -479,7 +479,7 @@ static int pmem_attach_disk(struct devic
gendev = disk_to_dev(disk);
gendev->groups = pmem_attribute_groups;
- device_add_disk(dev, disk);
+ device_add_disk(dev, disk, NULL);
if (devm_add_action_or_reset(dev, pmem_release_disk, pmem))
return -ENOMEM;
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3211,7 +3211,7 @@ static void nvme_alloc_ns(struct nvme_ct
nvme_get_ctrl(ctrl);
- device_add_disk(ctrl->device, ns->disk);
+ device_add_disk(ctrl->device, ns->disk, NULL);
if (sysfs_create_group(&disk_to_dev(ns->disk)->kobj,
&nvme_ns_id_attr_group))
pr_warn("%s: failed to create sysfs group for identification\n",
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -314,7 +314,7 @@ static void nvme_mpath_set_live(struct n
return;
if (!(head->disk->flags & GENHD_FL_UP)) {
- device_add_disk(&head->subsys->dev, head->disk);
+ device_add_disk(&head->subsys->dev, head->disk, NULL);
if (sysfs_create_group(&disk_to_dev(head->disk)->kobj,
&nvme_ns_id_attr_group))
dev_warn(&head->subsys->dev,
--- a/drivers/s390/block/dasd_genhd.c
+++ b/drivers/s390/block/dasd_genhd.c
@@ -76,7 +76,7 @@ int dasd_gendisk_alloc(struct dasd_block
gdp->queue = block->request_queue;
block->gdp = gdp;
set_capacity(block->gdp, 0);
- device_add_disk(&base->cdev->dev, block->gdp);
+ device_add_disk(&base->cdev->dev, block->gdp, NULL);
return 0;
}
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -685,7 +685,7 @@ dcssblk_add_store(struct device *dev, st
}
get_device(&dev_info->dev);
- device_add_disk(&dev_info->dev, dev_info->gd);
+ device_add_disk(&dev_info->dev, dev_info->gd, NULL);
switch (dev_info->segment_type) {
case SEG_TYPE_SR:
--- a/drivers/s390/block/scm_blk.c
+++ b/drivers/s390/block/scm_blk.c
@@ -500,7 +500,7 @@ int scm_blk_dev_setup(struct scm_blk_dev
/* 512 byte sectors */
set_capacity(bdev->gendisk, scmdev->size >> 9);
- device_add_disk(&scmdev->dev, bdev->gendisk);
+ device_add_disk(&scmdev->dev, bdev->gendisk, NULL);
return 0;
out_queue:
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3348,7 +3348,7 @@ static void sd_probe_async(void *data, a
}
blk_pm_runtime_init(sdp->request_queue, dev);
- device_add_disk(dev, gd);
+ device_add_disk(dev, gd, NULL);
if (sdkp->capacity)
sd_dif_config_host(sdkp);
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -758,7 +758,7 @@ static int sr_probe(struct device *dev)
dev_set_drvdata(dev, cd);
disk->flags |= GENHD_FL_REMOVABLE;
- device_add_disk(&sdev->sdev_gendev, disk);
+ device_add_disk(&sdev->sdev_gendev, disk, NULL);
sdev_printk(KERN_DEBUG, sdev,
"Attached scsi CD-ROM %s\n", cd->cdi.name);
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -402,10 +402,11 @@ static inline void free_part_info(struct
extern void part_round_stats(struct request_queue *q, int cpu, struct hd_struct *part);
/* block/genhd.c */
-extern void device_add_disk(struct device *parent, struct gendisk *disk);
+extern void device_add_disk(struct device *parent, struct gendisk *disk,
+ const struct attribute_group **groups);
static inline void add_disk(struct gendisk *disk)
{
- device_add_disk(NULL, disk);
+ device_add_disk(NULL, disk, NULL);
}
extern void device_add_disk_no_queue_reg(struct device *parent, struct gendisk *disk);
static inline void add_disk_no_queue_reg(struct gendisk *disk)
From: Greg Kroah-Hartman <[email protected]>
From: Hannes Reinecke <[email protected]>
commit 33b14f67a4e1eabd219fd6543da8f15ed86b641c upstream.
We should be registering the ns_id attribute as default sysfs
attribute groups, otherwise we have a race condition between
the uevent and the attributes appearing in sysfs.
[Backport Notes]
Resolve two context conflicts introduced by following two commits. These
two commits are applied after the current commit in upstream, while have
been merged into 4.19.y stable tree before the current commit.
1. drivers/nvme/host/core.c:nvme_ns_remove, introduced by commit
2181e455612a ("nvme: fix possible io failures when removing multipathed
ns").
2. drivers/nvme/host/multipath.c:nvme_mpath_set_live, introduced by
commit 5e416b11b4a9 ("nvme-multipath: fix possible I/O hang when paths
are updated").
Suggested-by: Bart van Assche <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/core.c | 21 +++-----
drivers/nvme/host/lightnvm.c | 105 +++++++++++++++++-------------------------
drivers/nvme/host/multipath.c | 15 +-----
drivers/nvme/host/nvme.h | 10 ----
4 files changed, 59 insertions(+), 92 deletions(-)
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2842,6 +2842,14 @@ const struct attribute_group nvme_ns_id_
.is_visible = nvme_ns_id_attrs_are_visible,
};
+const struct attribute_group *nvme_ns_id_attr_groups[] = {
+ &nvme_ns_id_attr_group,
+#ifdef CONFIG_NVM
+ &nvme_nvm_attr_group,
+#endif
+ NULL,
+};
+
#define nvme_show_str_function(field) \
static ssize_t field##_show(struct device *dev, \
struct device_attribute *attr, char *buf) \
@@ -3211,14 +3219,7 @@ static void nvme_alloc_ns(struct nvme_ct
nvme_get_ctrl(ctrl);
- device_add_disk(ctrl->device, ns->disk, NULL);
- if (sysfs_create_group(&disk_to_dev(ns->disk)->kobj,
- &nvme_ns_id_attr_group))
- pr_warn("%s: failed to create sysfs group for identification\n",
- ns->disk->disk_name);
- if (ns->ndev && nvme_nvm_register_sysfs(ns))
- pr_warn("%s: failed to register lightnvm sysfs group for identification\n",
- ns->disk->disk_name);
+ device_add_disk(ctrl->device, ns->disk, nvme_ns_id_attr_groups);
nvme_mpath_add_disk(ns, id);
nvme_fault_inject_init(ns);
@@ -3252,10 +3253,6 @@ static void nvme_ns_remove(struct nvme_n
synchronize_srcu(&ns->head->srcu); /* wait for concurrent submissions */
if (ns->disk && ns->disk->flags & GENHD_FL_UP) {
- sysfs_remove_group(&disk_to_dev(ns->disk)->kobj,
- &nvme_ns_id_attr_group);
- if (ns->ndev)
- nvme_nvm_unregister_sysfs(ns);
del_gendisk(ns->disk);
blk_cleanup_queue(ns->queue);
if (blk_get_integrity(ns->disk))
--- a/drivers/nvme/host/lightnvm.c
+++ b/drivers/nvme/host/lightnvm.c
@@ -1193,10 +1193,29 @@ static NVM_DEV_ATTR_12_RO(multiplane_mod
static NVM_DEV_ATTR_12_RO(media_capabilities);
static NVM_DEV_ATTR_12_RO(max_phys_secs);
-static struct attribute *nvm_dev_attrs_12[] = {
+/* 2.0 values */
+static NVM_DEV_ATTR_20_RO(groups);
+static NVM_DEV_ATTR_20_RO(punits);
+static NVM_DEV_ATTR_20_RO(chunks);
+static NVM_DEV_ATTR_20_RO(clba);
+static NVM_DEV_ATTR_20_RO(ws_min);
+static NVM_DEV_ATTR_20_RO(ws_opt);
+static NVM_DEV_ATTR_20_RO(maxoc);
+static NVM_DEV_ATTR_20_RO(maxocpu);
+static NVM_DEV_ATTR_20_RO(mw_cunits);
+static NVM_DEV_ATTR_20_RO(write_typ);
+static NVM_DEV_ATTR_20_RO(write_max);
+static NVM_DEV_ATTR_20_RO(reset_typ);
+static NVM_DEV_ATTR_20_RO(reset_max);
+
+static struct attribute *nvm_dev_attrs[] = {
+ /* version agnostic attrs */
&dev_attr_version.attr,
&dev_attr_capabilities.attr,
+ &dev_attr_read_typ.attr,
+ &dev_attr_read_max.attr,
+ /* 1.2 attrs */
&dev_attr_vendor_opcode.attr,
&dev_attr_device_mode.attr,
&dev_attr_media_manager.attr,
@@ -1211,8 +1230,6 @@ static struct attribute *nvm_dev_attrs_1
&dev_attr_page_size.attr,
&dev_attr_hw_sector_size.attr,
&dev_attr_oob_sector_size.attr,
- &dev_attr_read_typ.attr,
- &dev_attr_read_max.attr,
&dev_attr_prog_typ.attr,
&dev_attr_prog_max.attr,
&dev_attr_erase_typ.attr,
@@ -1221,33 +1238,7 @@ static struct attribute *nvm_dev_attrs_1
&dev_attr_media_capabilities.attr,
&dev_attr_max_phys_secs.attr,
- NULL,
-};
-
-static const struct attribute_group nvm_dev_attr_group_12 = {
- .name = "lightnvm",
- .attrs = nvm_dev_attrs_12,
-};
-
-/* 2.0 values */
-static NVM_DEV_ATTR_20_RO(groups);
-static NVM_DEV_ATTR_20_RO(punits);
-static NVM_DEV_ATTR_20_RO(chunks);
-static NVM_DEV_ATTR_20_RO(clba);
-static NVM_DEV_ATTR_20_RO(ws_min);
-static NVM_DEV_ATTR_20_RO(ws_opt);
-static NVM_DEV_ATTR_20_RO(maxoc);
-static NVM_DEV_ATTR_20_RO(maxocpu);
-static NVM_DEV_ATTR_20_RO(mw_cunits);
-static NVM_DEV_ATTR_20_RO(write_typ);
-static NVM_DEV_ATTR_20_RO(write_max);
-static NVM_DEV_ATTR_20_RO(reset_typ);
-static NVM_DEV_ATTR_20_RO(reset_max);
-
-static struct attribute *nvm_dev_attrs_20[] = {
- &dev_attr_version.attr,
- &dev_attr_capabilities.attr,
-
+ /* 2.0 attrs */
&dev_attr_groups.attr,
&dev_attr_punits.attr,
&dev_attr_chunks.attr,
@@ -1258,8 +1249,6 @@ static struct attribute *nvm_dev_attrs_2
&dev_attr_maxocpu.attr,
&dev_attr_mw_cunits.attr,
- &dev_attr_read_typ.attr,
- &dev_attr_read_max.attr,
&dev_attr_write_typ.attr,
&dev_attr_write_max.attr,
&dev_attr_reset_typ.attr,
@@ -1268,44 +1257,38 @@ static struct attribute *nvm_dev_attrs_2
NULL,
};
-static const struct attribute_group nvm_dev_attr_group_20 = {
- .name = "lightnvm",
- .attrs = nvm_dev_attrs_20,
-};
-
-int nvme_nvm_register_sysfs(struct nvme_ns *ns)
+static umode_t nvm_dev_attrs_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct gendisk *disk = dev_to_disk(dev);
+ struct nvme_ns *ns = disk->private_data;
struct nvm_dev *ndev = ns->ndev;
- struct nvm_geo *geo = &ndev->geo;
+ struct device_attribute *dev_attr =
+ container_of(attr, typeof(*dev_attr), attr);
if (!ndev)
- return -EINVAL;
-
- switch (geo->major_ver_id) {
- case 1:
- return sysfs_create_group(&disk_to_dev(ns->disk)->kobj,
- &nvm_dev_attr_group_12);
- case 2:
- return sysfs_create_group(&disk_to_dev(ns->disk)->kobj,
- &nvm_dev_attr_group_20);
- }
+ return 0;
- return -EINVAL;
-}
+ if (dev_attr->show == nvm_dev_attr_show)
+ return attr->mode;
-void nvme_nvm_unregister_sysfs(struct nvme_ns *ns)
-{
- struct nvm_dev *ndev = ns->ndev;
- struct nvm_geo *geo = &ndev->geo;
-
- switch (geo->major_ver_id) {
+ switch (ndev->geo.major_ver_id) {
case 1:
- sysfs_remove_group(&disk_to_dev(ns->disk)->kobj,
- &nvm_dev_attr_group_12);
+ if (dev_attr->show == nvm_dev_attr_show_12)
+ return attr->mode;
break;
case 2:
- sysfs_remove_group(&disk_to_dev(ns->disk)->kobj,
- &nvm_dev_attr_group_20);
+ if (dev_attr->show == nvm_dev_attr_show_20)
+ return attr->mode;
break;
}
+
+ return 0;
}
+
+const struct attribute_group nvme_nvm_attr_group = {
+ .name = "lightnvm",
+ .attrs = nvm_dev_attrs,
+ .is_visible = nvm_dev_attrs_visible,
+};
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -313,13 +313,9 @@ static void nvme_mpath_set_live(struct n
if (!head->disk)
return;
- if (!(head->disk->flags & GENHD_FL_UP)) {
- device_add_disk(&head->subsys->dev, head->disk, NULL);
- if (sysfs_create_group(&disk_to_dev(head->disk)->kobj,
- &nvme_ns_id_attr_group))
- dev_warn(&head->subsys->dev,
- "failed to create id group.\n");
- }
+ if (!(head->disk->flags & GENHD_FL_UP))
+ device_add_disk(&head->subsys->dev, head->disk,
+ nvme_ns_id_attr_groups);
synchronize_srcu(&ns->head->srcu);
kblockd_schedule_work(&ns->head->requeue_work);
@@ -541,11 +537,8 @@ void nvme_mpath_remove_disk(struct nvme_
{
if (!head->disk)
return;
- if (head->disk->flags & GENHD_FL_UP) {
- sysfs_remove_group(&disk_to_dev(head->disk)->kobj,
- &nvme_ns_id_attr_group);
+ if (head->disk->flags & GENHD_FL_UP)
del_gendisk(head->disk);
- }
blk_set_queue_dying(head->disk->queue);
/* make sure all pending bios are cleaned up */
kblockd_schedule_work(&head->requeue_work);
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -464,7 +464,7 @@ int nvme_delete_ctrl_sync(struct nvme_ct
int nvme_get_log(struct nvme_ctrl *ctrl, u32 nsid, u8 log_page, u8 lsp,
void *log, size_t size, u64 offset);
-extern const struct attribute_group nvme_ns_id_attr_group;
+extern const struct attribute_group *nvme_ns_id_attr_groups[];
extern const struct block_device_operations nvme_ns_head_ops;
#ifdef CONFIG_NVME_MULTIPATH
@@ -589,8 +589,7 @@ static inline void nvme_mpath_update_dis
void nvme_nvm_update_nvm_info(struct nvme_ns *ns);
int nvme_nvm_register(struct nvme_ns *ns, char *disk_name, int node);
void nvme_nvm_unregister(struct nvme_ns *ns);
-int nvme_nvm_register_sysfs(struct nvme_ns *ns);
-void nvme_nvm_unregister_sysfs(struct nvme_ns *ns);
+extern const struct attribute_group nvme_nvm_attr_group;
int nvme_nvm_ioctl(struct nvme_ns *ns, unsigned int cmd, unsigned long arg);
#else
static inline void nvme_nvm_update_nvm_info(struct nvme_ns *ns) {};
@@ -601,11 +600,6 @@ static inline int nvme_nvm_register(stru
}
static inline void nvme_nvm_unregister(struct nvme_ns *ns) {};
-static inline int nvme_nvm_register_sysfs(struct nvme_ns *ns)
-{
- return 0;
-}
-static inline void nvme_nvm_unregister_sysfs(struct nvme_ns *ns) {};
static inline int nvme_nvm_ioctl(struct nvme_ns *ns, unsigned int cmd,
unsigned long arg)
{
From: Greg Kroah-Hartman <[email protected]>
From: Hannes Reinecke <[email protected]>
commit 95cf7809bf9169fec4e4b7bb24b8069d8f354f96 upstream.
Register default sysfs groups during device_add_disk() to avoid a
race condition with udev during startup.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Ed L. Cachin <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/aoe/aoe.h | 1 -
drivers/block/aoe/aoeblk.c | 21 +++++++--------------
drivers/block/aoe/aoedev.c | 1 -
3 files changed, 7 insertions(+), 16 deletions(-)
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -201,7 +201,6 @@ int aoeblk_init(void);
void aoeblk_exit(void);
void aoeblk_gdalloc(void *);
void aoedisk_rm_debugfs(struct aoedev *d);
-void aoedisk_rm_sysfs(struct aoedev *d);
int aoechr_init(void);
void aoechr_exit(void);
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -177,10 +177,15 @@ static struct attribute *aoe_attrs[] = {
NULL,
};
-static const struct attribute_group attr_group = {
+static const struct attribute_group aoe_attr_group = {
.attrs = aoe_attrs,
};
+static const struct attribute_group *aoe_attr_groups[] = {
+ &aoe_attr_group,
+ NULL,
+};
+
static const struct file_operations aoe_debugfs_fops = {
.open = aoe_debugfs_open,
.read = seq_read,
@@ -220,17 +225,6 @@ aoedisk_rm_debugfs(struct aoedev *d)
}
static int
-aoedisk_add_sysfs(struct aoedev *d)
-{
- return sysfs_create_group(&disk_to_dev(d->gd)->kobj, &attr_group);
-}
-void
-aoedisk_rm_sysfs(struct aoedev *d)
-{
- sysfs_remove_group(&disk_to_dev(d->gd)->kobj, &attr_group);
-}
-
-static int
aoeblk_open(struct block_device *bdev, fmode_t mode)
{
struct aoedev *d = bdev->bd_disk->private_data;
@@ -417,8 +411,7 @@ aoeblk_gdalloc(void *vp)
spin_unlock_irqrestore(&d->lock, flags);
- add_disk(gd);
- aoedisk_add_sysfs(d);
+ device_add_disk(NULL, gd, aoe_attr_groups);
aoedisk_add_debugfs(d);
spin_lock_irqsave(&d->lock, flags);
--- a/drivers/block/aoe/aoedev.c
+++ b/drivers/block/aoe/aoedev.c
@@ -275,7 +275,6 @@ freedev(struct aoedev *d)
del_timer_sync(&d->timer);
if (d->gd) {
aoedisk_rm_debugfs(d);
- aoedisk_rm_sysfs(d);
del_gendisk(d->gd);
put_disk(d->gd);
blk_cleanup_queue(d->blkq);
From: Greg Kroah-Hartman <[email protected]>
From: David Sterba <[email protected]>
commit c17af96554a8a8777cbb0fd53b8497250e548b43 upstream.
There are temporary variables tracking the index of P and Q stripes, but
none of them is really used as such, merely for determining if the Q
stripe is present. This leads to compiler warnings with
-Wunused-but-set-variable and has been reported several times.
fs/btrfs/raid56.c: In function ‘finish_rmw’:
fs/btrfs/raid56.c:1199:6: warning: variable ‘p_stripe’ set but not used [-Wunused-but-set-variable]
1199 | int p_stripe = -1;
| ^~~~~~~~
fs/btrfs/raid56.c: In function ‘finish_parity_scrub’:
fs/btrfs/raid56.c:2356:6: warning: variable ‘p_stripe’ set but not used [-Wunused-but-set-variable]
2356 | int p_stripe = -1;
| ^~~~~~~~
Replace the two variables with one that has a clear meaning and also get
rid of the warnings. The logic that verifies that there are only 2
valid cases is unchanged.
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/raid56.c | 37 +++++++++++++++----------------------
1 file changed, 15 insertions(+), 22 deletions(-)
--- a/fs/btrfs/raid56.c
+++ b/fs/btrfs/raid56.c
@@ -1182,22 +1182,19 @@ static noinline void finish_rmw(struct b
int nr_data = rbio->nr_data;
int stripe;
int pagenr;
- int p_stripe = -1;
- int q_stripe = -1;
+ bool has_qstripe;
struct bio_list bio_list;
struct bio *bio;
int ret;
bio_list_init(&bio_list);
- if (rbio->real_stripes - rbio->nr_data == 1) {
- p_stripe = rbio->real_stripes - 1;
- } else if (rbio->real_stripes - rbio->nr_data == 2) {
- p_stripe = rbio->real_stripes - 2;
- q_stripe = rbio->real_stripes - 1;
- } else {
+ if (rbio->real_stripes - rbio->nr_data == 1)
+ has_qstripe = false;
+ else if (rbio->real_stripes - rbio->nr_data == 2)
+ has_qstripe = true;
+ else
BUG();
- }
/* at this point we either have a full stripe,
* or we've read the full stripe from the drive.
@@ -1241,7 +1238,7 @@ static noinline void finish_rmw(struct b
SetPageUptodate(p);
pointers[stripe++] = kmap(p);
- if (q_stripe != -1) {
+ if (has_qstripe) {
/*
* raid6, add the qstripe and call the
@@ -2340,8 +2337,7 @@ static noinline void finish_parity_scrub
int nr_data = rbio->nr_data;
int stripe;
int pagenr;
- int p_stripe = -1;
- int q_stripe = -1;
+ bool has_qstripe;
struct page *p_page = NULL;
struct page *q_page = NULL;
struct bio_list bio_list;
@@ -2351,14 +2347,12 @@ static noinline void finish_parity_scrub
bio_list_init(&bio_list);
- if (rbio->real_stripes - rbio->nr_data == 1) {
- p_stripe = rbio->real_stripes - 1;
- } else if (rbio->real_stripes - rbio->nr_data == 2) {
- p_stripe = rbio->real_stripes - 2;
- q_stripe = rbio->real_stripes - 1;
- } else {
+ if (rbio->real_stripes - rbio->nr_data == 1)
+ has_qstripe = false;
+ else if (rbio->real_stripes - rbio->nr_data == 2)
+ has_qstripe = true;
+ else
BUG();
- }
if (bbio->num_tgtdevs && bbio->tgtdev_map[rbio->scrubp]) {
is_replace = 1;
@@ -2380,7 +2374,7 @@ static noinline void finish_parity_scrub
goto cleanup;
SetPageUptodate(p_page);
- if (q_stripe != -1) {
+ if (has_qstripe) {
q_page = alloc_page(GFP_NOFS | __GFP_HIGHMEM);
if (!q_page) {
__free_page(p_page);
@@ -2403,8 +2397,7 @@ static noinline void finish_parity_scrub
/* then add the parity stripe */
pointers[stripe++] = kmap(p_page);
- if (q_stripe != -1) {
-
+ if (has_qstripe) {
/*
* raid6, add the qstripe and call the
* library function to fill in our p/q
From: Greg Kroah-Hartman <[email protected]>
From: Nikolay Borisov <[email protected]>
commit 0f9c03d824f6f522d3bc43629635c9765546ebc5 upstream.
Following commit f218ea6c4792 ("btrfs: delayed-inode: Remove wrong
qgroup meta reservation calls") this function now reserves num_bytes,
rather than the fixed amount of nodesize. As such this requires the
same amount to be freed in case of failure. Fix this by adjusting
the amount we are freeing.
Fixes: f218ea6c4792 ("btrfs: delayed-inode: Remove wrong qgroup meta reservation calls")
CC: [email protected] # 4.19+
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Nikolay Borisov <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/delayed-inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -642,7 +642,7 @@ static int btrfs_delayed_inode_reserve_m
btrfs_ino(inode),
num_bytes, 1);
} else {
- btrfs_qgroup_free_meta_prealloc(root, fs_info->nodesize);
+ btrfs_qgroup_free_meta_prealloc(root, num_bytes);
}
return ret;
}
From: Greg Kroah-Hartman <[email protected]>
From: Hannes Reinecke <[email protected]>
commit e982c4d0a29b1d61fbe7716a8dcf8984936d6730 upstream.
Use new-style DEVICE_ATTR_RO/DEVICE_ATTR_RW to create the sysfs attributes
and register the disk with default sysfs attribute groups.
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/virtio_blk.c | 68 +++++++++++++++++++++++++--------------------
1 file changed, 39 insertions(+), 29 deletions(-)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -423,8 +423,8 @@ static int minor_to_index(int minor)
return minor >> PART_BITS;
}
-static ssize_t virtblk_serial_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t serial_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct gendisk *disk = dev_to_disk(dev);
int err;
@@ -443,7 +443,7 @@ static ssize_t virtblk_serial_show(struc
return err;
}
-static DEVICE_ATTR(serial, 0444, virtblk_serial_show, NULL);
+static DEVICE_ATTR_RO(serial);
/* The queue's logical block size must be set before calling this */
static void virtblk_update_capacity(struct virtio_blk *vblk, bool resize)
@@ -619,8 +619,8 @@ static const char *const virtblk_cache_t
};
static ssize_t
-virtblk_cache_type_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+cache_type_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct gendisk *disk = dev_to_disk(dev);
struct virtio_blk *vblk = disk->private_data;
@@ -638,8 +638,7 @@ virtblk_cache_type_store(struct device *
}
static ssize_t
-virtblk_cache_type_show(struct device *dev, struct device_attribute *attr,
- char *buf)
+cache_type_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct gendisk *disk = dev_to_disk(dev);
struct virtio_blk *vblk = disk->private_data;
@@ -649,12 +648,38 @@ virtblk_cache_type_show(struct device *d
return snprintf(buf, 40, "%s\n", virtblk_cache_types[writeback]);
}
-static const struct device_attribute dev_attr_cache_type_ro =
- __ATTR(cache_type, 0444,
- virtblk_cache_type_show, NULL);
-static const struct device_attribute dev_attr_cache_type_rw =
- __ATTR(cache_type, 0644,
- virtblk_cache_type_show, virtblk_cache_type_store);
+static DEVICE_ATTR_RW(cache_type);
+
+static struct attribute *virtblk_attrs[] = {
+ &dev_attr_serial.attr,
+ &dev_attr_cache_type.attr,
+ NULL,
+};
+
+static umode_t virtblk_attrs_are_visible(struct kobject *kobj,
+ struct attribute *a, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct gendisk *disk = dev_to_disk(dev);
+ struct virtio_blk *vblk = disk->private_data;
+ struct virtio_device *vdev = vblk->vdev;
+
+ if (a == &dev_attr_cache_type.attr &&
+ !virtio_has_feature(vdev, VIRTIO_BLK_F_CONFIG_WCE))
+ return S_IRUGO;
+
+ return a->mode;
+}
+
+static const struct attribute_group virtblk_attr_group = {
+ .attrs = virtblk_attrs,
+ .is_visible = virtblk_attrs_are_visible,
+};
+
+static const struct attribute_group *virtblk_attr_groups[] = {
+ &virtblk_attr_group,
+ NULL,
+};
static int virtblk_init_request(struct blk_mq_tag_set *set, struct request *rq,
unsigned int hctx_idx, unsigned int numa_node)
@@ -858,24 +883,9 @@ static int virtblk_probe(struct virtio_d
virtblk_update_capacity(vblk, false);
virtio_device_ready(vdev);
- device_add_disk(&vdev->dev, vblk->disk, NULL);
- err = device_create_file(disk_to_dev(vblk->disk), &dev_attr_serial);
- if (err)
- goto out_del_disk;
-
- if (virtio_has_feature(vdev, VIRTIO_BLK_F_CONFIG_WCE))
- err = device_create_file(disk_to_dev(vblk->disk),
- &dev_attr_cache_type_rw);
- else
- err = device_create_file(disk_to_dev(vblk->disk),
- &dev_attr_cache_type_ro);
- if (err)
- goto out_del_disk;
+ device_add_disk(&vdev->dev, vblk->disk, virtblk_attr_groups);
return 0;
-out_del_disk:
- del_gendisk(vblk->disk);
- blk_cleanup_queue(vblk->disk->queue);
out_free_tags:
blk_mq_free_tag_set(&vblk->tag_set);
out_put_disk:
From: Greg Kroah-Hartman <[email protected]>
From: Nikolay Borisov <[email protected]>
commit 4f6a49de64fd1b1dba5229c02047376da7cf24fd upstream.
If btrfs_qgroup_reserve_data returns an error (i.e quota limit reached)
the handling logic directly goes to the 'out' label without first
unlocking the extent range between lockstart, lockend. This results in
deadlocks as other processes try to lock the same extent.
Fixes: a7f8b1c2ac21 ("btrfs: file: reserve qgroup space after the hole punch range is locked")
CC: [email protected] # 5.10+
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Nikolay Borisov <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/file.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -3016,8 +3016,11 @@ reserve_space:
goto out;
ret = btrfs_qgroup_reserve_data(inode, &data_reserved,
alloc_start, bytes_to_reserve);
- if (ret)
+ if (ret) {
+ unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart,
+ lockend, &cached_state);
goto out;
+ }
ret = btrfs_prealloc_file_range(inode, mode, alloc_start,
alloc_end - alloc_start,
i_blocksize(inode),
From: Greg Kroah-Hartman <[email protected]>
From: Heiner Kallweit <[email protected]>
commit d2a04370817fc7b0172dad2ef2decf907e1a304e upstream.
Armin reported that after referenced commit his RTL8105e is dead when
resuming from suspend and machine runs on battery. This patch has been
confirmed to fix the issue.
Fixes: e80bd76fbf56 ("r8169: work around power-saving bug on some chip versions")
Reported-by: Armin Wolf <[email protected]>
Tested-by: Armin Wolf <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/realtek/r8169.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4238,6 +4238,7 @@ static void r8168_pll_power_down(struct
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_25 ... RTL_GIGA_MAC_VER_26:
+ case RTL_GIGA_MAC_VER_29 ... RTL_GIGA_MAC_VER_30:
case RTL_GIGA_MAC_VER_32 ... RTL_GIGA_MAC_VER_33:
case RTL_GIGA_MAC_VER_37:
case RTL_GIGA_MAC_VER_39:
@@ -4265,6 +4266,7 @@ static void r8168_pll_power_up(struct rt
{
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_25 ... RTL_GIGA_MAC_VER_26:
+ case RTL_GIGA_MAC_VER_29 ... RTL_GIGA_MAC_VER_30:
case RTL_GIGA_MAC_VER_32 ... RTL_GIGA_MAC_VER_33:
case RTL_GIGA_MAC_VER_37:
case RTL_GIGA_MAC_VER_39:
From: Greg Kroah-Hartman <[email protected]>
From: Dan Carpenter <[email protected]>
[ Upstream commit 77516d25f54912a7baedeeac1b1b828b6f285152 ]
The copy_to_user() function returns the number of bytes remaining but
we want to return -EFAULT to the user if it can't complete the copy.
The "st" variable only holds zero on success or negative error codes on
failure so the type should be int.
Fixes: 36f988e978f8 ("rsxx: Adding in debugfs entries.")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/rsxx/core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/block/rsxx/core.c
+++ b/drivers/block/rsxx/core.c
@@ -179,15 +179,17 @@ static ssize_t rsxx_cram_read(struct fil
{
struct rsxx_cardinfo *card = file_inode(fp)->i_private;
char *buf;
- ssize_t st;
+ int st;
buf = kzalloc(cnt, GFP_KERNEL);
if (!buf)
return -ENOMEM;
st = rsxx_creg_read(card, CREG_ADD_CRAM + (u32)*ppos, cnt, buf, 1);
- if (!st)
- st = copy_to_user(ubuf, buf, cnt);
+ if (!st) {
+ if (copy_to_user(ubuf, buf, cnt))
+ st = -EFAULT;
+ }
kfree(buf);
if (st)
return st;
From: Greg Kroah-Hartman <[email protected]>
From: Kevin Wang <[email protected]>
commit 1aa46901ee51c1c5779b3b239ea0374a50c6d9ff upstream.
the register offset isn't needed division by 4 to pass RREG32_PCIE()
Signed-off-by: Kevin Wang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c
@@ -239,7 +239,7 @@ static ssize_t amdgpu_debugfs_regs_pcie_
while (size) {
uint32_t value;
- value = RREG32_PCIE(*pos >> 2);
+ value = RREG32_PCIE(*pos);
r = put_user(value, (uint32_t *)buf);
if (r)
return r;
@@ -282,7 +282,7 @@ static ssize_t amdgpu_debugfs_regs_pcie_
if (r)
return r;
- WREG32_PCIE(*pos >> 2, value);
+ WREG32_PCIE(*pos, value);
result += 4;
buf += 4;
From: Greg Kroah-Hartman <[email protected]>
From: Jeffle Xu <[email protected]>
commit 5b0fab508992c2e120971da658ce80027acbc405 upstream.
Fix dm_table_supports_dax() and invert logic of both
iterate_devices_callout_fn so that all devices' DAX capabilities are
properly checked.
Fixes: 545ed20e6df6 ("dm: add infrastructure for DAX support")
Cc: [email protected]
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
[jeffle: no dax synchronous]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-table.c | 25 ++++---------------------
1 file changed, 4 insertions(+), 21 deletions(-)
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -891,10 +891,10 @@ void dm_table_set_type(struct dm_table *
}
EXPORT_SYMBOL_GPL(dm_table_set_type);
-static int device_supports_dax(struct dm_target *ti, struct dm_dev *dev,
+static int device_not_dax_capable(struct dm_target *ti, struct dm_dev *dev,
sector_t start, sector_t len, void *data)
{
- return bdev_dax_supported(dev->bdev, PAGE_SIZE);
+ return !bdev_dax_supported(dev->bdev, PAGE_SIZE);
}
static bool dm_table_supports_dax(struct dm_table *t)
@@ -910,7 +910,7 @@ static bool dm_table_supports_dax(struct
return false;
if (!ti->type->iterate_devices ||
- !ti->type->iterate_devices(ti, device_supports_dax, NULL))
+ ti->type->iterate_devices(ti, device_not_dax_capable, NULL))
return false;
}
@@ -1731,23 +1731,6 @@ static int device_dax_write_cache_enable
return false;
}
-static int dm_table_supports_dax_write_cache(struct dm_table *t)
-{
- struct dm_target *ti;
- unsigned i;
-
- for (i = 0; i < dm_table_get_num_targets(t); i++) {
- ti = dm_table_get_target(t, i);
-
- if (ti->type->iterate_devices &&
- ti->type->iterate_devices(ti,
- device_dax_write_cache_enabled, NULL))
- return true;
- }
-
- return false;
-}
-
static int device_is_rotational(struct dm_target *ti, struct dm_dev *dev,
sector_t start, sector_t len, void *data)
{
@@ -1946,7 +1929,7 @@ void dm_table_set_restrictions(struct dm
else
blk_queue_flag_clear(QUEUE_FLAG_DAX, q);
- if (dm_table_supports_dax_write_cache(t))
+ if (dm_table_any_dev_attr(t, device_dax_write_cache_enabled))
dax_write_cache(t->md->dax_dev, true);
/* Ensure that all underlying devices are non-rotational. */
From: Greg Kroah-Hartman <[email protected]>
From: Andrey Ryabinin <[email protected]>
commit 140456f994195b568ecd7fc2287a34eadffef3ca upstream.
increase_address_space() calls get_zeroed_page(gfp) under spin_lock with
disabled interrupts. gfp flags passed to increase_address_space() may allow
sleeping, so it comes to this:
BUG: sleeping function called from invalid context at mm/page_alloc.c:4342
in_atomic(): 1, irqs_disabled(): 1, pid: 21555, name: epdcbbf1qnhbsd8
Call Trace:
dump_stack+0x66/0x8b
___might_sleep+0xec/0x110
__alloc_pages_nodemask+0x104/0x300
get_zeroed_page+0x15/0x40
iommu_map_page+0xdd/0x3e0
amd_iommu_map+0x50/0x70
iommu_map+0x106/0x220
vfio_iommu_type1_ioctl+0x76e/0x950 [vfio_iommu_type1]
do_vfs_ioctl+0xa3/0x6f0
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4e/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by moving get_zeroed_page() out of spin_lock/unlock section.
Fixes: 754265bcab ("iommu/amd: Fix race in increase_address_space()")
Signed-off-by: Andrey Ryabinin <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Andrey Ryabinin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/amd_iommu.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1348,24 +1348,26 @@ static void increase_address_space(struc
unsigned long flags;
u64 *pte;
+ pte = (void *)get_zeroed_page(gfp);
+ if (!pte)
+ return;
+
spin_lock_irqsave(&domain->lock, flags);
if (WARN_ON_ONCE(domain->mode == PAGE_MODE_6_LEVEL))
/* address space already 64 bit large */
goto out;
- pte = (void *)get_zeroed_page(gfp);
- if (!pte)
- goto out;
-
*pte = PM_LEVEL_PDE(domain->mode,
iommu_virt_to_phys(domain->pt_root));
domain->pt_root = pte;
domain->mode += 1;
domain->updated = true;
+ pte = NULL;
out:
spin_unlock_irqrestore(&domain->lock, flags);
+ free_page((unsigned long)pte);
return;
}
From: Greg Kroah-Hartman <[email protected]>
From: Hans de Goede <[email protected]>
[ Upstream commit 7c936d8d26afbc74deac0651d613dead2f76e81c ]
Cleanup the ACER_CAP_FOO defines:
-Switch to using BIT() macro.
-The ACER_CAP_RFBTN flag is set, but it is never checked anywhere, drop it.
-Drop the unused ACER_CAP_ANY define.
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/acer-wmi.c | 18 +++++++-----------
1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 92400abe3552..8d06454f5915 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -219,14 +219,12 @@ struct hotkey_function_type_aa {
/*
* Interface capability flags
*/
-#define ACER_CAP_MAILLED (1<<0)
-#define ACER_CAP_WIRELESS (1<<1)
-#define ACER_CAP_BLUETOOTH (1<<2)
-#define ACER_CAP_BRIGHTNESS (1<<3)
-#define ACER_CAP_THREEG (1<<4)
-#define ACER_CAP_ACCEL (1<<5)
-#define ACER_CAP_RFBTN (1<<6)
-#define ACER_CAP_ANY (0xFFFFFFFF)
+#define ACER_CAP_MAILLED BIT(0)
+#define ACER_CAP_WIRELESS BIT(1)
+#define ACER_CAP_BLUETOOTH BIT(2)
+#define ACER_CAP_BRIGHTNESS BIT(3)
+#define ACER_CAP_THREEG BIT(4)
+#define ACER_CAP_ACCEL BIT(5)
/*
* Interface type flags
@@ -1266,10 +1264,8 @@ static void __init type_aa_dmi_decode(const struct dmi_header *header, void *d)
interface->capability |= ACER_CAP_THREEG;
if (type_aa->commun_func_bitmap & ACER_WMID3_GDS_BLUETOOTH)
interface->capability |= ACER_CAP_BLUETOOTH;
- if (type_aa->commun_func_bitmap & ACER_WMID3_GDS_RFBTN) {
- interface->capability |= ACER_CAP_RFBTN;
+ if (type_aa->commun_func_bitmap & ACER_WMID3_GDS_RFBTN)
commun_func_bitmap &= ~ACER_WMID3_GDS_RFBTN;
- }
commun_fn_key_number = type_aa->commun_fn_key_number;
}
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Jeffle Xu <[email protected]>
commit a4c8dd9c2d0987cf542a2a0c42684c9c6d78a04e upstream.
According to the definition of dm_iterate_devices_fn:
* This function must iterate through each section of device used by the
* target until it encounters a non-zero return code, which it then returns.
* Returns zero if no callout returned non-zero.
For some target type (e.g. dm-stripe), one call of iterate_devices() may
iterate multiple underlying devices internally, in which case a non-zero
return code returned by iterate_devices_callout_fn will stop the iteration
in advance. No iterate_devices_callout_fn should return non-zero unless
device iteration should stop.
Rename dm_table_requires_stable_pages() to dm_table_any_dev_attr() and
elevate it for reuse to stop iterating (and return non-zero) on the
first device that causes iterate_devices_callout_fn to return non-zero.
Use dm_table_any_dev_attr() to properly iterate through devices.
Rename device_is_nonrot() to device_is_rotational() and invert logic
accordingly to fix improper disposition.
[jeffle: backport notes]
Also convert the no_sg_merge capability check, which is introduced by
commit 200612ec33e5 ("dm table: propagate QUEUE_FLAG_NO_SG_MERGE"), and
removed since commit 2705c93742e9 ("block: kill QUEUE_FLAG_NO_SG_MERGE")
in v5.1.
Also convert the partial completion capability check, which is
introduced by commit 22c11858e800 ("dm: introduce
DM_TYPE_NVME_BIO_BASED"), and removed since commit 9c37de297f65 ("dm:
remove special-casing of bio-based immutable singleton target on NVMe")
in v5.10.
Fixes: c3c4555edd10 ("dm table: clear add_random unless all devices have it set")
Fixes: 4693c9668fdc ("dm table: propagate non rotational flag")
Cc: [email protected]
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-table.c | 115 ++++++++++++++++++++++++++------------------------
1 file changed, 60 insertions(+), 55 deletions(-)
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1392,6 +1392,46 @@ struct dm_target *dm_table_find_target(s
return &t->targets[(KEYS_PER_NODE * n) + k];
}
+/*
+ * type->iterate_devices() should be called when the sanity check needs to
+ * iterate and check all underlying data devices. iterate_devices() will
+ * iterate all underlying data devices until it encounters a non-zero return
+ * code, returned by whether the input iterate_devices_callout_fn, or
+ * iterate_devices() itself internally.
+ *
+ * For some target type (e.g. dm-stripe), one call of iterate_devices() may
+ * iterate multiple underlying devices internally, in which case a non-zero
+ * return code returned by iterate_devices_callout_fn will stop the iteration
+ * in advance.
+ *
+ * Cases requiring _any_ underlying device supporting some kind of attribute,
+ * should use the iteration structure like dm_table_any_dev_attr(), or call
+ * it directly. @func should handle semantics of positive examples, e.g.
+ * capable of something.
+ *
+ * Cases requiring _all_ underlying devices supporting some kind of attribute,
+ * should use the iteration structure like dm_table_supports_nowait() or
+ * dm_table_supports_discards(). Or introduce dm_table_all_devs_attr() that
+ * uses an @anti_func that handle semantics of counter examples, e.g. not
+ * capable of something. So: return !dm_table_any_dev_attr(t, anti_func);
+ */
+static bool dm_table_any_dev_attr(struct dm_table *t,
+ iterate_devices_callout_fn func)
+{
+ struct dm_target *ti;
+ unsigned int i;
+
+ for (i = 0; i < dm_table_get_num_targets(t); i++) {
+ ti = dm_table_get_target(t, i);
+
+ if (ti->type->iterate_devices &&
+ ti->type->iterate_devices(ti, func, NULL))
+ return true;
+ }
+
+ return false;
+}
+
static int count_device(struct dm_target *ti, struct dm_dev *dev,
sector_t start, sector_t len, void *data)
{
@@ -1708,12 +1748,12 @@ static int dm_table_supports_dax_write_c
return false;
}
-static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, sector_t len, void *data)
+static int device_is_rotational(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
{
struct request_queue *q = bdev_get_queue(dev->bdev);
- return q && blk_queue_nonrot(q);
+ return q && !blk_queue_nonrot(q);
}
static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev,
@@ -1724,43 +1764,26 @@ static int device_is_not_random(struct d
return q && !blk_queue_add_random(q);
}
-static int queue_supports_sg_merge(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, sector_t len, void *data)
+static int queue_no_sg_merge(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
{
struct request_queue *q = bdev_get_queue(dev->bdev);
- return q && !test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags);
+ return q && test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags);
}
-static bool dm_table_all_devices_attribute(struct dm_table *t,
- iterate_devices_callout_fn func)
-{
- struct dm_target *ti;
- unsigned i;
-
- for (i = 0; i < dm_table_get_num_targets(t); i++) {
- ti = dm_table_get_target(t, i);
-
- if (!ti->type->iterate_devices ||
- !ti->type->iterate_devices(ti, func, NULL))
- return false;
- }
-
- return true;
-}
-
-static int device_no_partial_completion(struct dm_target *ti, struct dm_dev *dev,
+static int device_is_partial_completion(struct dm_target *ti, struct dm_dev *dev,
sector_t start, sector_t len, void *data)
{
char b[BDEVNAME_SIZE];
/* For now, NVMe devices are the only devices of this class */
- return (strncmp(bdevname(dev->bdev, b), "nvme", 4) == 0);
+ return (strncmp(bdevname(dev->bdev, b), "nvme", 4) != 0);
}
static bool dm_table_does_not_support_partial_completion(struct dm_table *t)
{
- return dm_table_all_devices_attribute(t, device_no_partial_completion);
+ return !dm_table_any_dev_attr(t, device_is_partial_completion);
}
static int device_not_write_same_capable(struct dm_target *ti, struct dm_dev *dev,
@@ -1887,27 +1910,6 @@ static int device_requires_stable_pages(
return q && bdi_cap_stable_pages_required(q->backing_dev_info);
}
-/*
- * If any underlying device requires stable pages, a table must require
- * them as well. Only targets that support iterate_devices are considered:
- * don't want error, zero, etc to require stable pages.
- */
-static bool dm_table_requires_stable_pages(struct dm_table *t)
-{
- struct dm_target *ti;
- unsigned i;
-
- for (i = 0; i < dm_table_get_num_targets(t); i++) {
- ti = dm_table_get_target(t, i);
-
- if (ti->type->iterate_devices &&
- ti->type->iterate_devices(ti, device_requires_stable_pages, NULL))
- return true;
- }
-
- return false;
-}
-
void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
struct queue_limits *limits)
{
@@ -1948,28 +1950,31 @@ void dm_table_set_restrictions(struct dm
dax_write_cache(t->md->dax_dev, true);
/* Ensure that all underlying devices are non-rotational. */
- if (dm_table_all_devices_attribute(t, device_is_nonrot))
- blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
- else
+ if (dm_table_any_dev_attr(t, device_is_rotational))
blk_queue_flag_clear(QUEUE_FLAG_NONROT, q);
+ else
+ blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
if (!dm_table_supports_write_same(t))
q->limits.max_write_same_sectors = 0;
if (!dm_table_supports_write_zeroes(t))
q->limits.max_write_zeroes_sectors = 0;
- if (dm_table_all_devices_attribute(t, queue_supports_sg_merge))
- blk_queue_flag_clear(QUEUE_FLAG_NO_SG_MERGE, q);
- else
+ if (dm_table_any_dev_attr(t, queue_no_sg_merge))
blk_queue_flag_set(QUEUE_FLAG_NO_SG_MERGE, q);
+ else
+ blk_queue_flag_clear(QUEUE_FLAG_NO_SG_MERGE, q);
dm_table_verify_integrity(t);
/*
* Some devices don't use blk_integrity but still want stable pages
* because they do their own checksumming.
+ * If any underlying device requires stable pages, a table must require
+ * them as well. Only targets that support iterate_devices are considered:
+ * don't want error, zero, etc to require stable pages.
*/
- if (dm_table_requires_stable_pages(t))
+ if (dm_table_any_dev_attr(t, device_requires_stable_pages))
q->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES;
else
q->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES;
@@ -1980,7 +1985,7 @@ void dm_table_set_restrictions(struct dm
* Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
* have it set.
*/
- if (blk_queue_add_random(q) && dm_table_all_devices_attribute(t, device_is_not_random))
+ if (blk_queue_add_random(q) && dm_table_any_dev_attr(t, device_is_not_random))
blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
}
From: Greg Kroah-Hartman <[email protected]>
From: Jeffle Xu <[email protected]>
commit 24f6b6036c9eec21191646930ad42808e6180510 upstream.
Fix dm_table_supports_zoned_model() and invert logic of both
iterate_devices_callout_fn so that all devices' zoned capabilities are
properly checked.
Add one more parameter to dm_table_any_dev_attr(), which is actually
used as the @data parameter of iterate_devices_callout_fn, so that
dm_table_matches_zone_sectors() can be replaced by
dm_table_any_dev_attr().
Fixes: dd88d313bef02 ("dm table: add zoned block devices validation")
Cc: [email protected]
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
[jeffle: also convert no_sg_merge and partial completion check]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-table.c | 52 +++++++++++++++++---------------------------------
1 file changed, 18 insertions(+), 34 deletions(-)
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1413,10 +1413,10 @@ struct dm_target *dm_table_find_target(s
* should use the iteration structure like dm_table_supports_nowait() or
* dm_table_supports_discards(). Or introduce dm_table_all_devs_attr() that
* uses an @anti_func that handle semantics of counter examples, e.g. not
- * capable of something. So: return !dm_table_any_dev_attr(t, anti_func);
+ * capable of something. So: return !dm_table_any_dev_attr(t, anti_func, data);
*/
static bool dm_table_any_dev_attr(struct dm_table *t,
- iterate_devices_callout_fn func)
+ iterate_devices_callout_fn func, void *data)
{
struct dm_target *ti;
unsigned int i;
@@ -1425,7 +1425,7 @@ static bool dm_table_any_dev_attr(struct
ti = dm_table_get_target(t, i);
if (ti->type->iterate_devices &&
- ti->type->iterate_devices(ti, func, NULL))
+ ti->type->iterate_devices(ti, func, data))
return true;
}
@@ -1468,13 +1468,13 @@ bool dm_table_has_no_data_devices(struct
return true;
}
-static int device_is_zoned_model(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, sector_t len, void *data)
+static int device_not_zoned_model(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
{
struct request_queue *q = bdev_get_queue(dev->bdev);
enum blk_zoned_model *zoned_model = data;
- return q && blk_queue_zoned_model(q) == *zoned_model;
+ return !q || blk_queue_zoned_model(q) != *zoned_model;
}
static bool dm_table_supports_zoned_model(struct dm_table *t,
@@ -1491,37 +1491,20 @@ static bool dm_table_supports_zoned_mode
return false;
if (!ti->type->iterate_devices ||
- !ti->type->iterate_devices(ti, device_is_zoned_model, &zoned_model))
+ ti->type->iterate_devices(ti, device_not_zoned_model, &zoned_model))
return false;
}
return true;
}
-static int device_matches_zone_sectors(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, sector_t len, void *data)
+static int device_not_matches_zone_sectors(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
{
struct request_queue *q = bdev_get_queue(dev->bdev);
unsigned int *zone_sectors = data;
- return q && blk_queue_zone_sectors(q) == *zone_sectors;
-}
-
-static bool dm_table_matches_zone_sectors(struct dm_table *t,
- unsigned int zone_sectors)
-{
- struct dm_target *ti;
- unsigned i;
-
- for (i = 0; i < dm_table_get_num_targets(t); i++) {
- ti = dm_table_get_target(t, i);
-
- if (!ti->type->iterate_devices ||
- !ti->type->iterate_devices(ti, device_matches_zone_sectors, &zone_sectors))
- return false;
- }
-
- return true;
+ return !q || blk_queue_zone_sectors(q) != *zone_sectors;
}
static int validate_hardware_zoned_model(struct dm_table *table,
@@ -1541,7 +1524,7 @@ static int validate_hardware_zoned_model
if (!zone_sectors || !is_power_of_2(zone_sectors))
return -EINVAL;
- if (!dm_table_matches_zone_sectors(table, zone_sectors)) {
+ if (dm_table_any_dev_attr(table, device_not_matches_zone_sectors, &zone_sectors)) {
DMERR("%s: zone sectors is not consistent across all devices",
dm_device_name(table->md));
return -EINVAL;
@@ -1766,7 +1749,7 @@ static int device_is_partial_completion(
static bool dm_table_does_not_support_partial_completion(struct dm_table *t)
{
- return !dm_table_any_dev_attr(t, device_is_partial_completion);
+ return !dm_table_any_dev_attr(t, device_is_partial_completion, NULL);
}
static int device_not_write_same_capable(struct dm_target *ti, struct dm_dev *dev,
@@ -1929,11 +1912,11 @@ void dm_table_set_restrictions(struct dm
else
blk_queue_flag_clear(QUEUE_FLAG_DAX, q);
- if (dm_table_any_dev_attr(t, device_dax_write_cache_enabled))
+ if (dm_table_any_dev_attr(t, device_dax_write_cache_enabled, NULL))
dax_write_cache(t->md->dax_dev, true);
/* Ensure that all underlying devices are non-rotational. */
- if (dm_table_any_dev_attr(t, device_is_rotational))
+ if (dm_table_any_dev_attr(t, device_is_rotational, NULL))
blk_queue_flag_clear(QUEUE_FLAG_NONROT, q);
else
blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
@@ -1943,7 +1926,7 @@ void dm_table_set_restrictions(struct dm
if (!dm_table_supports_write_zeroes(t))
q->limits.max_write_zeroes_sectors = 0;
- if (dm_table_any_dev_attr(t, queue_no_sg_merge))
+ if (dm_table_any_dev_attr(t, queue_no_sg_merge, NULL))
blk_queue_flag_set(QUEUE_FLAG_NO_SG_MERGE, q);
else
blk_queue_flag_clear(QUEUE_FLAG_NO_SG_MERGE, q);
@@ -1957,7 +1940,7 @@ void dm_table_set_restrictions(struct dm
* them as well. Only targets that support iterate_devices are considered:
* don't want error, zero, etc to require stable pages.
*/
- if (dm_table_any_dev_attr(t, device_requires_stable_pages))
+ if (dm_table_any_dev_attr(t, device_requires_stable_pages, NULL))
q->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES;
else
q->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES;
@@ -1968,7 +1951,8 @@ void dm_table_set_restrictions(struct dm
* Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
* have it set.
*/
- if (blk_queue_add_random(q) && dm_table_any_dev_attr(t, device_is_not_random))
+ if (blk_queue_add_random(q) &&
+ dm_table_any_dev_attr(t, device_is_not_random, NULL))
blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q);
}
From: Greg Kroah-Hartman <[email protected]>
From: Julian Braha <[email protected]>
[ Upstream commit 475f23b8c66d2892ad6acbf90ed757cafab13de7 ]
When RDMA_RXE is enabled and CRYPTO is disabled, Kbuild gives the
following warning:
WARNING: unmet direct dependencies detected for CRYPTO_CRC32
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- RDMA_RXE [=y] && (INFINIBAND_USER_ACCESS [=y] || !INFINIBAND_USER_ACCESS [=y]) && INET [=y] && PCI [=y] && INFINIBAND [=y] && INFINIBAND_VIRT_DMA [=y]
This is because RDMA_RXE selects CRYPTO_CRC32, without depending on or
selecting CRYPTO, despite that config option being subordinate to CRYPTO.
Fixes: cee2688e3cd6 ("IB/rxe: Offload CRC calculation when possible")
Signed-off-by: Julian Braha <[email protected]>
Link: https://lore.kernel.org/r/21525878.NYvzQUHefP@ubuntu-mate-laptop
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rxe/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/sw/rxe/Kconfig b/drivers/infiniband/sw/rxe/Kconfig
index 67ae960ab523..1fa19a77583e 100644
--- a/drivers/infiniband/sw/rxe/Kconfig
+++ b/drivers/infiniband/sw/rxe/Kconfig
@@ -3,6 +3,7 @@ config RDMA_RXE
depends on INET && PCI && INFINIBAND
depends on !64BIT || ARCH_DMA_ADDR_T_64BIT
select NET_UDP_TUNNEL
+ select CRYPTO
select CRYPTO_CRC32
select DMA_VIRT_OPS
---help---
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Hannes Reinecke <[email protected]>
commit 98af4d4df889dcea3bc0ce6b8a04759658ba8826 upstream.
Register default sysfs groups during device_add_disk() to avoid a
race condition with udev during startup.
Signed-off-by: Hannes Reinecke <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Nitin Gupta <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/zram/zram_drv.c | 26 ++++++--------------------
1 file changed, 6 insertions(+), 20 deletions(-)
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -1644,6 +1644,11 @@ static const struct attribute_group zram
.attrs = zram_disk_attrs,
};
+static const struct attribute_group *zram_disk_attr_groups[] = {
+ &zram_disk_attr_group,
+ NULL,
+};
+
/*
* Allocate and initialize new zram device. the function returns
* '>= 0' device_id upon success, and negative value otherwise.
@@ -1724,24 +1729,14 @@ static int zram_add(void)
zram->disk->queue->backing_dev_info->capabilities |=
(BDI_CAP_STABLE_WRITES | BDI_CAP_SYNCHRONOUS_IO);
- add_disk(zram->disk);
+ device_add_disk(NULL, zram->disk, zram_disk_attr_groups);
- ret = sysfs_create_group(&disk_to_dev(zram->disk)->kobj,
- &zram_disk_attr_group);
- if (ret < 0) {
- pr_err("Error creating sysfs group for device %d\n",
- device_id);
- goto out_free_disk;
- }
strlcpy(zram->compressor, default_compressor, sizeof(zram->compressor));
zram_debugfs_register(zram);
pr_info("Added device: %s\n", zram->disk->disk_name);
return device_id;
-out_free_disk:
- del_gendisk(zram->disk);
- put_disk(zram->disk);
out_free_queue:
blk_cleanup_queue(queue);
out_free_idr:
@@ -1770,15 +1765,6 @@ static int zram_remove(struct zram *zram
mutex_unlock(&bdev->bd_mutex);
zram_debugfs_unregister(zram);
- /*
- * Remove sysfs first, so no one will perform a disksize
- * store while we destroy the devices. This also helps during
- * hot_remove -- zram_reset_device() is the last holder of
- * ->init_lock, no later/concurrent disksize_store() or any
- * other sysfs handlers are possible.
- */
- sysfs_remove_group(&disk_to_dev(zram->disk)->kobj,
- &zram_disk_attr_group);
/* Make sure all the pending I/O are finished */
fsync_bdev(bdev);
From: Greg Kroah-Hartman <[email protected]>
From: Hans de Goede <[email protected]>
[ Upstream commit 39aa009bb66f9d5fbd1e58ca4aa03d6e6f2c9915 ]
Add a new force_caps module parameter to allow overriding the drivers
builtin capability detection mechanism.
This can be used to for example:
-Disable rfkill functionality on devices where there is an AA OEM DMI
record advertising non functional rfkill switches
-Force loading of the driver on devices with a missing AA OEM DMI record
Note that force_caps is -1 when unset, this allows forcing the
capability field to 0, which results in acer-wmi only providing WMI
hotkey handling while disabling all other (led, rfkill, backlight)
functionality.
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/acer-wmi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index b95dce2475ab..2e77ac458bab 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -246,6 +246,7 @@ static int mailled = -1;
static int brightness = -1;
static int threeg = -1;
static int force_series;
+static int force_caps = -1;
static bool ec_raw_mode;
static bool has_type_aa;
static u16 commun_func_bitmap;
@@ -255,11 +256,13 @@ module_param(mailled, int, 0444);
module_param(brightness, int, 0444);
module_param(threeg, int, 0444);
module_param(force_series, int, 0444);
+module_param(force_caps, int, 0444);
module_param(ec_raw_mode, bool, 0444);
MODULE_PARM_DESC(mailled, "Set initial state of Mail LED");
MODULE_PARM_DESC(brightness, "Set initial LCD backlight brightness");
MODULE_PARM_DESC(threeg, "Set initial state of 3G hardware");
MODULE_PARM_DESC(force_series, "Force a different laptop series");
+MODULE_PARM_DESC(force_caps, "Force the capability bitmask to this value");
MODULE_PARM_DESC(ec_raw_mode, "Enable EC raw mode");
struct acer_data {
@@ -2228,7 +2231,7 @@ static int __init acer_wmi_init(void)
}
/* WMID always provides brightness methods */
interface->capability |= ACER_CAP_BRIGHTNESS;
- } else if (!wmi_has_guid(WMID_GUID2) && interface && !has_type_aa) {
+ } else if (!wmi_has_guid(WMID_GUID2) && interface && !has_type_aa && force_caps == -1) {
pr_err("No WMID device detection method found\n");
return -ENODEV;
}
@@ -2258,6 +2261,9 @@ static int __init acer_wmi_init(void)
if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
interface->capability &= ~ACER_CAP_BRIGHTNESS;
+ if (force_caps != -1)
+ interface->capability = force_caps;
+
if (wmi_has_guid(WMID_GUID3)) {
if (ACPI_FAILURE(acer_wmi_enable_rf_button()))
pr_warn("Cannot enable RF Button Driver\n");
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Hans de Goede <[email protected]>
[ Upstream commit 5c54cb6c627e8f50f490e6b5656051a5ac29eab4 ]
Add support for SW_TABLET_MODE on the Acer Switch 10 (SW5-012) and the
acer Switch 10 (S1003) models.
There is no way to detect if this is supported, so this uses DMI based
quirks setting force_caps to ACER_CAP_KBD_DOCK (these devices have no
other acer-wmi based functionality).
The new SW_TABLET_MODE functionality can be tested on devices which
are not in the DMI table by passing acer_wmi.force_caps=0x40 on the
kernel commandline.
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/acer-wmi.c | 109 +++++++++++++++++++++++++++++++-
1 file changed, 106 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 657fd8c49597..b22df329e97b 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -43,6 +43,7 @@
#include <linux/input/sparse-keymap.h>
#include <acpi/video.h>
+ACPI_MODULE_NAME(KBUILD_MODNAME);
MODULE_AUTHOR("Carlos Corbacho");
MODULE_DESCRIPTION("Acer Laptop WMI Extras Driver");
MODULE_LICENSE("GPL");
@@ -93,7 +94,7 @@ MODULE_ALIAS("wmi:676AA15E-6A47-4D9F-A2CC-1E6D18D14026");
enum acer_wmi_event_ids {
WMID_HOTKEY_EVENT = 0x1,
- WMID_ACCEL_EVENT = 0x5,
+ WMID_ACCEL_OR_KBD_DOCK_EVENT = 0x5,
};
static const struct key_entry acer_wmi_keymap[] __initconst = {
@@ -141,7 +142,9 @@ struct event_return_value {
u8 function;
u8 key_num;
u16 device_state;
- u32 reserved;
+ u16 reserved1;
+ u8 kbd_dock_state;
+ u8 reserved2;
} __attribute__((packed));
/*
@@ -225,6 +228,7 @@ struct hotkey_function_type_aa {
#define ACER_CAP_BRIGHTNESS BIT(3)
#define ACER_CAP_THREEG BIT(4)
#define ACER_CAP_SET_FUNCTION_MODE BIT(5)
+#define ACER_CAP_KBD_DOCK BIT(6)
/*
* Interface type flags
@@ -334,6 +338,15 @@ static int __init dmi_matched(const struct dmi_system_id *dmi)
return 1;
}
+static int __init set_force_caps(const struct dmi_system_id *dmi)
+{
+ if (force_caps == -1) {
+ force_caps = (uintptr_t)dmi->driver_data;
+ pr_info("Found %s, set force_caps to 0x%x\n", dmi->ident, force_caps);
+ }
+ return 1;
+}
+
static struct quirk_entry quirk_unknown = {
};
@@ -512,6 +525,24 @@ static const struct dmi_system_id acer_quirks[] __initconst = {
},
.driver_data = &quirk_acer_travelmate_2490,
},
+ {
+ .callback = set_force_caps,
+ .ident = "Acer Aspire Switch 10 SW5-012",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
+ },
+ .driver_data = (void *)ACER_CAP_KBD_DOCK,
+ },
+ {
+ .callback = set_force_caps,
+ .ident = "Acer One 10 (S1003)",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "One S1003"),
+ },
+ .driver_data = (void *)ACER_CAP_KBD_DOCK,
+ },
{}
};
@@ -1552,6 +1583,71 @@ static int acer_gsensor_event(void)
return 0;
}
+/*
+ * Switch series keyboard dock status
+ */
+static int acer_kbd_dock_state_to_sw_tablet_mode(u8 kbd_dock_state)
+{
+ switch (kbd_dock_state) {
+ case 0x01: /* Docked, traditional clamshell laptop mode */
+ return 0;
+ case 0x04: /* Stand-alone tablet */
+ case 0x40: /* Docked, tent mode, keyboard not usable */
+ return 1;
+ default:
+ pr_warn("Unknown kbd_dock_state 0x%02x\n", kbd_dock_state);
+ }
+
+ return 0;
+}
+
+static void acer_kbd_dock_get_initial_state(void)
+{
+ u8 *output, input[8] = { 0x05, 0x00, };
+ struct acpi_buffer input_buf = { sizeof(input), input };
+ struct acpi_buffer output_buf = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ acpi_status status;
+ int sw_tablet_mode;
+
+ status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input_buf, &output_buf);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Error getting keyboard-dock initial status"));
+ return;
+ }
+
+ obj = output_buf.pointer;
+ if (!obj || obj->type != ACPI_TYPE_BUFFER || obj->buffer.length != 8) {
+ pr_err("Unexpected output format getting keyboard-dock initial status\n");
+ goto out_free_obj;
+ }
+
+ output = obj->buffer.pointer;
+ if (output[0] != 0x00 || (output[3] != 0x05 && output[3] != 0x45)) {
+ pr_err("Unexpected output [0]=0x%02x [3]=0x%02x getting keyboard-dock initial status\n",
+ output[0], output[3]);
+ goto out_free_obj;
+ }
+
+ sw_tablet_mode = acer_kbd_dock_state_to_sw_tablet_mode(output[4]);
+ input_report_switch(acer_wmi_input_dev, SW_TABLET_MODE, sw_tablet_mode);
+
+out_free_obj:
+ kfree(obj);
+}
+
+static void acer_kbd_dock_event(const struct event_return_value *event)
+{
+ int sw_tablet_mode;
+
+ if (!has_cap(ACER_CAP_KBD_DOCK))
+ return;
+
+ sw_tablet_mode = acer_kbd_dock_state_to_sw_tablet_mode(event->kbd_dock_state);
+ input_report_switch(acer_wmi_input_dev, SW_TABLET_MODE, sw_tablet_mode);
+ input_sync(acer_wmi_input_dev);
+}
+
/*
* Rfkill devices
*/
@@ -1779,8 +1875,9 @@ static void acer_wmi_notify(u32 value, void *context)
sparse_keymap_report_event(acer_wmi_input_dev, scancode, 1, true);
}
break;
- case WMID_ACCEL_EVENT:
+ case WMID_ACCEL_OR_KBD_DOCK_EVENT:
acer_gsensor_event();
+ acer_kbd_dock_event(&return_value);
break;
default:
pr_warn("Unknown function number - %d - %d\n",
@@ -1980,6 +2077,9 @@ static int __init acer_wmi_input_setup(void)
if (err)
goto err_free_dev;
+ if (has_cap(ACER_CAP_KBD_DOCK))
+ input_set_capability(acer_wmi_input_dev, EV_SW, SW_TABLET_MODE);
+
status = wmi_install_notify_handler(ACERWMID_EVENT_GUID,
acer_wmi_notify, NULL);
if (ACPI_FAILURE(status)) {
@@ -1987,6 +2087,9 @@ static int __init acer_wmi_input_setup(void)
goto err_free_dev;
}
+ if (has_cap(ACER_CAP_KBD_DOCK))
+ acer_kbd_dock_get_initial_state();
+
err = input_register_device(acer_wmi_input_dev);
if (err)
goto err_uninstall_notifier;
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Hans de Goede <[email protected]>
[ Upstream commit bf753400280d1384abb783efc0b42c491d6deec3 ]
Add the Acer Aspire Switch 10E SW3-016 to the list of models which use the
Acer Switch WMI interface for reporting SW_TABLET_MODE.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/acer-wmi.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index b22df329e97b..bd25c8a156d2 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -525,6 +525,15 @@ static const struct dmi_system_id acer_quirks[] __initconst = {
},
.driver_data = &quirk_acer_travelmate_2490,
},
+ {
+ .callback = set_force_caps,
+ .ident = "Acer Aspire Switch 10E SW3-016",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW3-016"),
+ },
+ .driver_data = (void *)ACER_CAP_KBD_DOCK,
+ },
{
.callback = set_force_caps,
.ident = "Acer Aspire Switch 10 SW5-012",
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Ethan Warth <[email protected]>
[ Upstream commit 1008230f2abeb624f6d71b2e1c424fa4eeebbf84 ]
Mayflash/Dragonrise seems to have yet another device ID for one of their
Gamecube controller adapters. Previous to this commit, the adapter
registered only one /dev/input/js* device, and all controller inputs (from
any controller) were mapped to this device. This patch defines the 1846
USB device ID and enables the HID_QUIRK_MULTI_INPUT quirk for it, which
fixes that (with the patch, four /dev/input/js* devices are created, one
for each of the four controller ports).
Signed-off-by: Ethan Warth <[email protected]>
Tested-by: Wladimir J. van der Laan <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-mf.c | 2 ++
drivers/hid/hid-quirks.c | 2 ++
3 files changed, 5 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index ab2be7a115d8..2f1516b32837 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -358,6 +358,7 @@
#define USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR 0x1803
#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE1 0x1843
#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE2 0x1844
+#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE3 0x1846
#define USB_VENDOR_ID_DWAV 0x0eef
#define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER 0x0001
diff --git a/drivers/hid/hid-mf.c b/drivers/hid/hid-mf.c
index 03f10516131d..a41202d38509 100644
--- a/drivers/hid/hid-mf.c
+++ b/drivers/hid/hid-mf.c
@@ -161,6 +161,8 @@ static const struct hid_device_id mf_devices[] = {
.driver_data = HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE2),
.driver_data = 0 }, /* No quirk required */
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE3),
+ .driver_data = HID_QUIRK_MULTI_INPUT },
{ }
};
MODULE_DEVICE_TABLE(hid, mf_devices);
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 10cb42a00fe8..8fbe7b9cd84a 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -74,6 +74,7 @@ static const struct hid_device_id hid_quirks[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_REDRAGON_SEYMUR2), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1), HID_QUIRK_MULTI_INPUT },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE3), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER), HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET },
@@ -498,6 +499,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE3) },
#endif
#if IS_ENABLED(CONFIG_HID_MICROSOFT)
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500) },
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Daniel Lee Kruse <[email protected]>
[ Upstream commit dbf0b3a7b719eb3f72cb53c2ce7d34a012a9c261 ]
On AMD Family 15h (Models 30h-3fh), I/O Memory Management Unit
RiSC engine sometimes stalls, requiring a reset.
As result, MythTV and w-scan won't scan channels on the AMD Kaveri
APU with the Hauppauge QuadHD TV tuner card.
For the solution I added the Input/Output Memory Management Unit's PCI
Identity of 0x1423 to the broken_dev_id[] array, which is used by
a quirks logic meant to fix similar problems with other AMD
chipsets.
Signed-off-by: Daniel Lee Kruse <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/cx23885/cx23885-core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index fd5c52b21436..a1d738969d7b 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -2084,6 +2084,10 @@ static struct {
* 0x1451 is PCI ID for the IOMMU found on Ryzen
*/
{ PCI_VENDOR_ID_AMD, 0x1451 },
+ /* According to sudo lspci -nn,
+ * 0x1423 is the PCI ID for the IOMMU found on Kaveri
+ */
+ { PCI_VENDOR_ID_AMD, 0x1423 },
};
static bool cx23885_does_need_dma_reset(void)
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Colin Ian King <[email protected]>
[ Upstream commit 26a9630c72ebac7c564db305a6aee54a8edde70e ]
Currently the mask operation on variable conf is just 3 bits so
the switch statement case value of 8 is unreachable dead code.
The function daio_mgr_dao_init can be passed a 4 bit value,
function dao_rsc_init calls it with conf set to:
conf = (desc->msr & 0x7) | (desc->passthru << 3);
so clearly when desc->passthru is set to 1 then conf can be
at least 8.
Fix this by changing the mask to 0xf.
Fixes: 8cc72361481f ("ALSA: SB X-Fi driver merge")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/ctxfi/cthw20k2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
index 3c966fafc754..6c9ab602212e 100644
--- a/sound/pci/ctxfi/cthw20k2.c
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -995,7 +995,7 @@ static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf)
if (idx < 4) {
/* S/PDIF output */
- switch ((conf & 0x7)) {
+ switch ((conf & 0xf)) {
case 1:
set_field(&ctl->txctl[idx], ATXCTL_NUC, 0);
break;
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: AngeloGioacchino Del Regno <[email protected]>
[ Upstream commit 8f03c30cb814213e36032084a01f49a9e604a3e3 ]
The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets
programmed to some different values on a per-model basis.
At least, this is what we intend to do here;
Unfortunately, though, this register is being overwritten with a
static magic number, right after applying the GPU-specific
configuration (including the GPU-specific quirks) and that is
effectively nullifying the efforts.
Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL
register in order to retain the wanted configuration for the
target GPU.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Jordan Crouse <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index d29a58bd2f7a..776bbe9775e9 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -681,8 +681,6 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
if (adreno_gpu->info->quirks & ADRENO_QUIRK_TWO_PASS_USE_WFI)
gpu_rmw(gpu, REG_A5XX_PC_DBG_ECO_CNTL, 0, (1 << 8));
- gpu_write(gpu, REG_A5XX_PC_DBG_ECO_CNTL, 0xc0200100);
-
/* Enable USE_RETENTION_FLOPS */
gpu_write(gpu, REG_A5XX_CP_CHICKEN_DBG, 0x02000000);
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Milan Broz <[email protected]>
commit df7b59ba9245c4a3115ebaa905e3e5719a3810da upstream.
Optional Forward Error Correction (FEC) code in dm-verity uses
Reed-Solomon code and should support roots from 2 to 24.
The error correction parity bytes (of roots lengths per RS block) are
stored on a separate device in sequence without any padding.
Currently, to access FEC device, the dm-verity-fec code uses dm-bufio
client with block size set to verity data block (usually 4096 or 512
bytes).
Because this block size is not divisible by some (most!) of the roots
supported lengths, data repair cannot work for partially stored parity
bytes.
This fix changes FEC device dm-bufio block size to "roots << SECTOR_SHIFT"
where we can be sure that the full parity data is always available.
(There cannot be partial FEC blocks because parity must cover whole
sectors.)
Because the optional FEC starting offset could be unaligned to this
new block size, we have to use dm_bufio_set_sector_offset() to
configure it.
The problem is easily reproduced using veritysetup, e.g. for roots=13:
# create verity device with RS FEC
dd if=/dev/urandom of=data.img bs=4096 count=8 status=none
veritysetup format data.img hash.img --fec-device=fec.img --fec-roots=13 | awk '/^Root hash/{ print $3 }' >roothash
# create an erasure that should be always repairable with this roots setting
dd if=/dev/zero of=data.img conv=notrunc bs=1 count=8 seek=4088 status=none
# try to read it through dm-verity
veritysetup open data.img test hash.img --fec-device=fec.img --fec-roots=13 $(cat roothash)
dd if=/dev/mapper/test of=/dev/null bs=4096 status=noxfer
# wait for possible recursive recovery in kernel
udevadm settle
veritysetup close test
With this fix, errors are properly repaired.
device-mapper: verity-fec: 7:1: FEC 0: corrected 8 errors
...
Without it, FEC code usually ends on unrecoverable failure in RS decoder:
device-mapper: verity-fec: 7:1: FEC 0: failed to correct: -74
...
This problem is present in all kernels since the FEC code's
introduction (kernel 4.5).
It is thought that this problem is not visible in Android ecosystem
because it always uses a default RS roots=2.
Depends-on: a14e5ec66a7a ("dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size")
Signed-off-by: Milan Broz <[email protected]>
Tested-by: Jérôme Carretero <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Cc: [email protected] # 4.5+
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-verity-fec.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
--- a/drivers/md/dm-verity-fec.c
+++ b/drivers/md/dm-verity-fec.c
@@ -65,19 +65,18 @@ static int fec_decode_rs8(struct dm_veri
static u8 *fec_read_parity(struct dm_verity *v, u64 rsb, int index,
unsigned *offset, struct dm_buffer **buf)
{
- u64 position, block;
+ u64 position, block, rem;
u8 *res;
position = (index + rsb) * v->fec->roots;
- block = position >> v->data_dev_block_bits;
- *offset = (unsigned)(position - (block << v->data_dev_block_bits));
+ block = div64_u64_rem(position, v->fec->roots << SECTOR_SHIFT, &rem);
+ *offset = (unsigned)rem;
- res = dm_bufio_read(v->fec->bufio, v->fec->start + block, buf);
+ res = dm_bufio_read(v->fec->bufio, block, buf);
if (unlikely(IS_ERR(res))) {
DMERR("%s: FEC %llu: parity read failed (block %llu): %ld",
v->data_dev->name, (unsigned long long)rsb,
- (unsigned long long)(v->fec->start + block),
- PTR_ERR(res));
+ (unsigned long long)block, PTR_ERR(res));
*buf = NULL;
}
@@ -159,7 +158,7 @@ static int fec_decode_bufs(struct dm_ver
/* read the next block when we run out of parity bytes */
offset += v->fec->roots;
- if (offset >= 1 << v->data_dev_block_bits) {
+ if (offset >= v->fec->roots << SECTOR_SHIFT) {
dm_bufio_release(buf);
par = fec_read_parity(v, rsb, block_offset, &offset, &buf);
@@ -675,7 +674,7 @@ int verity_fec_ctr(struct dm_verity *v)
{
struct dm_verity_fec *f = v->fec;
struct dm_target *ti = v->ti;
- u64 hash_blocks;
+ u64 hash_blocks, fec_blocks;
int ret;
if (!verity_fec_is_enabled(v)) {
@@ -745,15 +744,17 @@ int verity_fec_ctr(struct dm_verity *v)
}
f->bufio = dm_bufio_client_create(f->dev->bdev,
- 1 << v->data_dev_block_bits,
+ f->roots << SECTOR_SHIFT,
1, 0, NULL, NULL);
if (IS_ERR(f->bufio)) {
ti->error = "Cannot initialize FEC bufio client";
return PTR_ERR(f->bufio);
}
- if (dm_bufio_get_device_size(f->bufio) <
- ((f->start + f->rounds * f->roots) >> v->data_dev_block_bits)) {
+ dm_bufio_set_sector_offset(f->bufio, f->start << (v->data_dev_block_bits - SECTOR_SHIFT));
+
+ fec_blocks = div64_u64(f->rounds * f->roots, v->fec->roots << SECTOR_SHIFT);
+ if (dm_bufio_get_device_size(f->bufio) < fec_blocks) {
ti->error = "FEC device is too small";
return -E2BIG;
}
From: Greg Kroah-Hartman <[email protected]>
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit 4add4d988f95f47493500a7a19c623827061589b ]
If a reset is performed, but even the reset fails for some reasons (e.g.,
on Surface devices, the fw reset requires another quirks),
cancel_work_sync() hangs in mwifiex_cleanup_pcie().
# firmware went into a bad state
[...]
[ 1608.281690] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex...
[ 1608.282724] mwifiex_pcie 0000:03:00.0: rx_pending=0, tx_pending=1, cmd_pending=0
[ 1608.292400] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 1608.292405] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
# reset performed after firmware went into a bad state
[ 1609.394320] mwifiex_pcie 0000:03:00.0: WLAN FW already running! Skip FW dnld
[ 1609.394335] mwifiex_pcie 0000:03:00.0: WLAN FW is active
# but even the reset failed
[ 1619.499049] mwifiex_pcie 0000:03:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xfa, act = 0xe000
[ 1619.499094] mwifiex_pcie 0000:03:00.0: num_data_h2c_failure = 0
[ 1619.499103] mwifiex_pcie 0000:03:00.0: num_cmd_h2c_failure = 0
[ 1619.499110] mwifiex_pcie 0000:03:00.0: is_cmd_timedout = 1
[ 1619.499117] mwifiex_pcie 0000:03:00.0: num_tx_timeout = 0
[ 1619.499124] mwifiex_pcie 0000:03:00.0: last_cmd_index = 0
[ 1619.499133] mwifiex_pcie 0000:03:00.0: last_cmd_id: fa 00 07 01 07 01 07 01 07 01
[ 1619.499140] mwifiex_pcie 0000:03:00.0: last_cmd_act: 00 e0 00 00 00 00 00 00 00 00
[ 1619.499147] mwifiex_pcie 0000:03:00.0: last_cmd_resp_index = 3
[ 1619.499155] mwifiex_pcie 0000:03:00.0: last_cmd_resp_id: 07 81 07 81 07 81 07 81 07 81
[ 1619.499162] mwifiex_pcie 0000:03:00.0: last_event_index = 2
[ 1619.499169] mwifiex_pcie 0000:03:00.0: last_event: 58 00 58 00 58 00 58 00 58 00
[ 1619.499177] mwifiex_pcie 0000:03:00.0: data_sent=0 cmd_sent=1
[ 1619.499185] mwifiex_pcie 0000:03:00.0: ps_mode=0 ps_state=0
[ 1619.499215] mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device
# mwifiex_pcie_work hang happening
[ 1823.233923] INFO: task kworker/3:1:44 blocked for more than 122 seconds.
[ 1823.233932] Tainted: G WC OE 5.10.0-rc1-1-mainline #1
[ 1823.233935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1823.233940] task:kworker/3:1 state:D stack: 0 pid: 44 ppid: 2 flags:0x00004000
[ 1823.233960] Workqueue: events mwifiex_pcie_work [mwifiex_pcie]
[ 1823.233965] Call Trace:
[ 1823.233981] __schedule+0x292/0x820
[ 1823.233990] schedule+0x45/0xe0
[ 1823.233995] schedule_timeout+0x11c/0x160
[ 1823.234003] wait_for_completion+0x9e/0x100
[ 1823.234012] __flush_work.isra.0+0x156/0x210
[ 1823.234018] ? flush_workqueue_prep_pwqs+0x130/0x130
[ 1823.234026] __cancel_work_timer+0x11e/0x1a0
[ 1823.234035] mwifiex_cleanup_pcie+0x28/0xd0 [mwifiex_pcie]
[ 1823.234049] mwifiex_free_adapter+0x24/0xe0 [mwifiex]
[ 1823.234060] _mwifiex_fw_dpc+0x294/0x560 [mwifiex]
[ 1823.234074] mwifiex_reinit_sw+0x15d/0x300 [mwifiex]
[ 1823.234080] mwifiex_pcie_reset_done+0x50/0x80 [mwifiex_pcie]
[ 1823.234087] pci_try_reset_function+0x5c/0x90
[ 1823.234094] process_one_work+0x1d6/0x3a0
[ 1823.234100] worker_thread+0x4d/0x3d0
[ 1823.234107] ? rescuer_thread+0x410/0x410
[ 1823.234112] kthread+0x142/0x160
[ 1823.234117] ? __kthread_bind_mask+0x60/0x60
[ 1823.234124] ret_from_fork+0x22/0x30
[...]
This is a deadlock caused by calling cancel_work_sync() in
mwifiex_cleanup_pcie():
- Device resets are done via mwifiex_pcie_card_reset()
- which schedules card->work to call mwifiex_pcie_card_reset_work()
- which calls pci_try_reset_function().
- This leads to mwifiex_pcie_reset_done() be called on the same workqueue,
which in turn calls
- mwifiex_reinit_sw() and that calls
- _mwifiex_fw_dpc().
The problem is now that _mwifiex_fw_dpc() calls mwifiex_free_adapter()
in case firmware initialization fails. That ends up calling
mwifiex_cleanup_pcie().
Note that all those calls are still running on the workqueue. So when
mwifiex_cleanup_pcie() now calls cancel_work_sync(), it's really waiting
on itself to complete, causing a deadlock.
This commit fixes the deadlock by skipping cancel_work_sync() on a reset
failure path.
After this commit, when reset fails, the following output is
expected to be shown:
kernel: mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device
kernel: mwifiex: Failed to bring up adapter: -5
kernel: mwifiex_pcie 0000:03:00.0: reinit failed: -5
To reproduce this issue, for example, try putting the root port of wifi
into D3 (replace "00:1d.3" with your setup).
# put into D3 (root port)
sudo setpci -v -s 00:1d.3 CAP_PM+4.b=0b
Cc: Maximilian Luz <[email protected]>
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 18 +++++++++++++++++-
drivers/net/wireless/marvell/mwifiex/pcie.h | 2 ++
2 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 991b9cc18000..5907b34037c2 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -381,6 +381,8 @@ static void mwifiex_pcie_reset_prepare(struct pci_dev *pdev)
clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags);
clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags);
mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
+
+ card->pci_reset_ongoing = true;
}
/*
@@ -409,6 +411,8 @@ static void mwifiex_pcie_reset_done(struct pci_dev *pdev)
dev_err(&pdev->dev, "reinit failed: %d\n", ret);
else
mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
+
+ card->pci_reset_ongoing = false;
}
static const struct pci_error_handlers mwifiex_pcie_err_handler = {
@@ -3000,7 +3004,19 @@ static void mwifiex_cleanup_pcie(struct mwifiex_adapter *adapter)
int ret;
u32 fw_status;
- cancel_work_sync(&card->work);
+ /* Perform the cancel_work_sync() only when we're not resetting
+ * the card. It's because that function never returns if we're
+ * in reset path. If we're here when resetting the card, it means
+ * that we failed to reset the card (reset failure path).
+ */
+ if (!card->pci_reset_ongoing) {
+ mwifiex_dbg(adapter, MSG, "performing cancel_work_sync()...\n");
+ cancel_work_sync(&card->work);
+ mwifiex_dbg(adapter, MSG, "cancel_work_sync() done\n");
+ } else {
+ mwifiex_dbg(adapter, MSG,
+ "skipped cancel_work_sync() because we're in card reset failure path\n");
+ }
ret = mwifiex_read_reg(adapter, reg->fw_status, &fw_status);
if (fw_status == FIRMWARE_READY_PCIE) {
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.h b/drivers/net/wireless/marvell/mwifiex/pcie.h
index f7ce9b6db6b4..72d0c01ff359 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.h
@@ -391,6 +391,8 @@ struct pcie_service_card {
struct mwifiex_msix_context share_irq_ctx;
struct work_struct work;
unsigned long work_flags;
+
+ bool pci_reset_ongoing;
};
static inline int
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Hans de Goede <[email protected]>
[ Upstream commit 9feb0763e4985ccfae632de3bb2f029cc8389842 ]
Cleanup accelerometer device handling:
-Drop acer_wmi_accel_destroy instead directly call input_unregister_device.
-The information tracked by the CAP_ACCEL flag mirrors acer_wmi_accel_dev
being NULL. Drop the CAP flag, this is a preparation change for allowing
users to override the capability flags. Dropping the flag stops users
from causing a NULL pointer dereference by forcing the capability.
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/acer-wmi.c | 20 ++++++--------------
1 file changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 8d06454f5915..b95dce2475ab 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -224,7 +224,6 @@ struct hotkey_function_type_aa {
#define ACER_CAP_BLUETOOTH BIT(2)
#define ACER_CAP_BRIGHTNESS BIT(3)
#define ACER_CAP_THREEG BIT(4)
-#define ACER_CAP_ACCEL BIT(5)
/*
* Interface type flags
@@ -1526,7 +1525,7 @@ static int acer_gsensor_event(void)
struct acpi_buffer output;
union acpi_object out_obj[5];
- if (!has_cap(ACER_CAP_ACCEL))
+ if (!acer_wmi_accel_dev)
return -1;
output.length = sizeof(out_obj);
@@ -1935,8 +1934,6 @@ static int __init acer_wmi_accel_setup(void)
if (err)
return err;
- interface->capability |= ACER_CAP_ACCEL;
-
acer_wmi_accel_dev = input_allocate_device();
if (!acer_wmi_accel_dev)
return -ENOMEM;
@@ -1962,11 +1959,6 @@ err_free_dev:
return err;
}
-static void acer_wmi_accel_destroy(void)
-{
- input_unregister_device(acer_wmi_accel_dev);
-}
-
static int __init acer_wmi_input_setup(void)
{
acpi_status status;
@@ -2121,7 +2113,7 @@ static int acer_resume(struct device *dev)
if (has_cap(ACER_CAP_BRIGHTNESS))
set_u32(data->brightness, ACER_CAP_BRIGHTNESS);
- if (has_cap(ACER_CAP_ACCEL))
+ if (acer_wmi_accel_dev)
acer_gsensor_init();
return 0;
@@ -2329,8 +2321,8 @@ error_device_alloc:
error_platform_register:
if (wmi_has_guid(ACERWMID_EVENT_GUID))
acer_wmi_input_destroy();
- if (has_cap(ACER_CAP_ACCEL))
- acer_wmi_accel_destroy();
+ if (acer_wmi_accel_dev)
+ input_unregister_device(acer_wmi_accel_dev);
return err;
}
@@ -2340,8 +2332,8 @@ static void __exit acer_wmi_exit(void)
if (wmi_has_guid(ACERWMID_EVENT_GUID))
acer_wmi_input_destroy();
- if (has_cap(ACER_CAP_ACCEL))
- acer_wmi_accel_destroy();
+ if (acer_wmi_accel_dev)
+ input_unregister_device(acer_wmi_accel_dev);
remove_debugfs();
platform_device_unregister(acer_platform_device);
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Alexander Lobakin <[email protected]>
commit e131a5634830047923c694b4ce0c3b31745ff01b upstream.
gro_cells lib is used by different encapsulating netdevices, such as
geneve, macsec, vxlan etc. to speed up decapsulated traffic processing.
CPU tag is a sort of "encapsulation", and we can use the same mechs to
greatly improve overall DSA performance.
skbs are passed to the GRO layer after removing CPU tags, so we don't
need any new packet offload types as it was firstly proposed by me in
the first GRO-over-DSA variant [1].
The size of struct gro_cells is sizeof(void *), so hot struct
dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields
remain in one 32-byte cacheline.
The other positive side effect is that drivers for network devices
that can be shipped as CPU ports of DSA-driven switches can now use
napi_gro_frags() to pass skbs to kernel. Packets built that way are
completely non-linear and are likely being dropped without GRO.
This was tested on to-be-mainlined-soon Ethernet driver that uses
napi_gro_frags(), and the overall performance was on par with the
variant from [1], sometimes even better due to minimal overhead.
net.core.gro_normal_batch tuning may help to push it to the limit
on particular setups and platforms.
iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup
on 1.2 GHz MIPS board:
5.7-rc2 baseline:
[ID] Interval Transfer Bitrate Retr
[ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender
[ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver
Iface RX packets TX packets
eth0 7097731 7097702
port0 426050 6671829
port1 6671681 425862
port1.218 6671677 425851
With this patch:
[ID] Interval Transfer Bitrate Retr
[ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender
[ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver
Iface RX packets TX packets
eth0 9474792 9474777
port0 455200 353288
port1 9019592 455035
port1.218 353144 455024
v2:
- Add some performance examples in the commit message;
- No functional changes.
[1] https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Pali Rohár <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/dsa/Kconfig | 1 +
net/dsa/dsa.c | 2 +-
net/dsa/dsa_priv.h | 3 +++
net/dsa/slave.c | 10 +++++++++-
4 files changed, 14 insertions(+), 2 deletions(-)
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -8,6 +8,7 @@ config NET_DSA
tristate "Distributed Switch Architecture"
depends on HAVE_NET_DSA && MAY_USE_DEVLINK
depends on BRIDGE || BRIDGE=n
+ select GRO_CELLS
select NET_SWITCHDEV
select PHYLINK
---help---
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -191,7 +191,7 @@ static int dsa_switch_rcv(struct sk_buff
if (dsa_skb_defer_rx_timestamp(p, skb))
return 0;
- netif_receive_skb(skb);
+ gro_cells_receive(&p->gcells, skb);
return 0;
}
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -15,6 +15,7 @@
#include <linux/netdevice.h>
#include <linux/netpoll.h>
#include <net/dsa.h>
+#include <net/gro_cells.h>
enum {
DSA_NOTIFIER_AGEING_TIME,
@@ -72,6 +73,8 @@ struct dsa_slave_priv {
struct pcpu_sw_netstats *stats64;
+ struct gro_cells gcells;
+
/* DSA port data, such as switch, port index, etc. */
struct dsa_port *dp;
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1337,6 +1337,11 @@ int dsa_slave_create(struct dsa_port *po
free_netdev(slave_dev);
return -ENOMEM;
}
+
+ ret = gro_cells_init(&p->gcells, slave_dev);
+ if (ret)
+ goto out_free;
+
p->dp = port;
INIT_LIST_HEAD(&p->mall_tc_list);
p->xmit = cpu_dp->tag_ops->xmit;
@@ -1347,7 +1352,7 @@ int dsa_slave_create(struct dsa_port *po
ret = dsa_slave_phy_setup(slave_dev);
if (ret) {
netdev_err(master, "error %d setting up slave phy\n", ret);
- goto out_free;
+ goto out_gcells;
}
dsa_slave_notify(slave_dev, DSA_PORT_REGISTER);
@@ -1366,6 +1371,8 @@ out_phy:
phylink_disconnect_phy(p->dp->pl);
rtnl_unlock();
phylink_destroy(p->dp->pl);
+out_gcells:
+ gro_cells_destroy(&p->gcells);
out_free:
free_percpu(p->stats64);
free_netdev(slave_dev);
@@ -1386,6 +1393,7 @@ void dsa_slave_destroy(struct net_device
dsa_slave_notify(slave_dev, DSA_PORT_UNREGISTER);
unregister_netdev(slave_dev);
phylink_destroy(dp->pl);
+ gro_cells_destroy(&p->gcells);
free_percpu(p->stats64);
free_netdev(slave_dev);
}
From: Greg Kroah-Hartman <[email protected]>
From: Hans de Goede <[email protected]>
[ Upstream commit 82cb8a5c395ea5be20e0fe31a8fe84380a502ca5 ]
Not all devices supporting WMID_GUID3 support the wmid3_set_function_mode()
call, leading to errors like these:
[ 60.138358] acer_wmi: Enabling RF Button failed: 0x1 - 0xff
[ 60.140036] acer_wmi: Enabling Launch Manager failed: 0x1 - 0xff
Add an ACER_CAP_SET_FUNCTION_MODE capability flag, so that these calls
can be disabled through the new force_caps mechanism.
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/acer-wmi.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 2e77ac458bab..657fd8c49597 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -224,6 +224,7 @@ struct hotkey_function_type_aa {
#define ACER_CAP_BLUETOOTH BIT(2)
#define ACER_CAP_BRIGHTNESS BIT(3)
#define ACER_CAP_THREEG BIT(4)
+#define ACER_CAP_SET_FUNCTION_MODE BIT(5)
/*
* Interface type flags
@@ -2261,10 +2262,14 @@ static int __init acer_wmi_init(void)
if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
interface->capability &= ~ACER_CAP_BRIGHTNESS;
+ if (wmi_has_guid(WMID_GUID3))
+ interface->capability |= ACER_CAP_SET_FUNCTION_MODE;
+
if (force_caps != -1)
interface->capability = force_caps;
- if (wmi_has_guid(WMID_GUID3)) {
+ if (wmi_has_guid(WMID_GUID3) &&
+ (interface->capability & ACER_CAP_SET_FUNCTION_MODE)) {
if (ACPI_FAILURE(acer_wmi_enable_rf_button()))
pr_warn("Cannot enable RF Button Driver\n");
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Jisheng Zhang <[email protected]>
[ Upstream commit 5f7dfda4f2cec580c135fd81d96a05006651c128 ]
The SDHCI_PRESET_FOR_* registers are not set(all read as zeros), so
set the quirk.
Signed-off-by: Jisheng Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci-of-dwcmshc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 1b7cd144fb01..a34b17b284a5 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -28,6 +28,7 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = {
static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = {
.ops = &sdhci_dwcmshc_ops,
.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
};
static int dwcmshc_probe(struct platform_device *pdev)
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Aswath Govindraju <[email protected]>
[ Upstream commit f6f1f8e6e3eea25f539105d48166e91f0ab46dd1 ]
A dummy zero bit is sent preceding the data during a read transfer by the
Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift
of data during a read. In order to ignore this bit a quirk can be added to
send an extra zero bit after the read address.
Add a quirk to ignore the zero bit sent before data by adding a zero bit
after the read address.
[1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf
Signed-off-by: Aswath Govindraju <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/eeprom/eeprom_93xx46.c | 15 +++++++++++++++
include/linux/eeprom_93xx46.h | 2 ++
2 files changed, 17 insertions(+)
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index a3248ebd28c6..182feab6da25 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -38,6 +38,10 @@ static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = {
EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH,
};
+static const struct eeprom_93xx46_devtype_data microchip_93lc46b_data = {
+ .quirks = EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE,
+};
+
struct eeprom_93xx46_dev {
struct spi_device *spi;
struct eeprom_93xx46_platform_data *pdata;
@@ -58,6 +62,11 @@ static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev)
return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH;
}
+static inline bool has_quirk_extra_read_cycle(struct eeprom_93xx46_dev *edev)
+{
+ return edev->pdata->quirks & EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE;
+}
+
static int eeprom_93xx46_read(void *priv, unsigned int off,
void *val, size_t count)
{
@@ -99,6 +108,11 @@ static int eeprom_93xx46_read(void *priv, unsigned int off,
dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
cmd_addr, edev->spi->max_speed_hz);
+ if (has_quirk_extra_read_cycle(edev)) {
+ cmd_addr <<= 1;
+ bits += 1;
+ }
+
spi_message_init(&m);
t[0].tx_buf = (char *)&cmd_addr;
@@ -366,6 +380,7 @@ static void select_deassert(void *context)
static const struct of_device_id eeprom_93xx46_of_table[] = {
{ .compatible = "eeprom-93xx46", },
{ .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
+ { .compatible = "microchip,93lc46b", .data = µchip_93lc46b_data, },
{}
};
MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h
index eec7928ff8fe..99580c22f91a 100644
--- a/include/linux/eeprom_93xx46.h
+++ b/include/linux/eeprom_93xx46.h
@@ -16,6 +16,8 @@ struct eeprom_93xx46_platform_data {
#define EEPROM_93XX46_QUIRK_SINGLE_WORD_READ (1 << 0)
/* Instructions such as EWEN are (addrlen + 2) in length. */
#define EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH (1 << 1)
+/* Add extra cycle after address during a read */
+#define EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE BIT(2)
/*
* optional hooks to control additional logic
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Bjorn Helgaas <[email protected]>
[ Upstream commit 059983790a4c963d92943e55a61fca55be427d55 ]
Add function 1 DMA alias quirk for Marvell 88SS9215 PCIe SSD Controller.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135
Link: https://lore.kernel.org/r/[email protected]
Reported-by: John Smith <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/quirks.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index af2149632102..70f05595da60 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3961,6 +3961,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9183,
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9215,
+ quirk_dma_func1_alias);
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c127 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9220,
quirk_dma_func1_alias);
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Chris Chiu <[email protected]>
[ Upstream commit 1bea2256aa96a2d7b1b576eb74e29d79edc9bea8 ]
Tha ARCHOS Cesium 140 tablet has problem with the jack-sensing,
thus the heaset functions are not working.
Add quirk for this model to select the correct input map, jack-detect
options and channel map to enable jack sensing and headset microphone.
This device uses IN1 for its internal MIC and JD2 for jack-detect.
Signed-off-by: Chris Chiu <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 8a943de1e5b5..d63d99776384 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -444,6 +444,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_SSP0_AIF1 |
BYT_RT5640_MCLK_EN),
},
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 140 CESIUM"),
+ },
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
--
2.30.1
Hi!
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.180 release.
> There are 39 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any kernel problems here: (Renesas boards
are still unavailable)
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On 3/10/21 6:24 AM, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.180 release.
> There are 39 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Mar 2021 13:23:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.180-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Wed, Mar 10, 2021 at 02:24:08PM +0100, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.180 release.
> There are 39 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Mar 2021 13:23:09 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 420 pass: 420 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On 2021/3/10 21:24, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.180 release.
> There are 39 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Mar 2021 13:23:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.180-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 4.19.180-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.180-rc1+
Commit: fffeea4063954b09866c112dad21a991ba52a914
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total_num: 4662
succeed_num: 4762
failed_num: 0
timeout_num: 0
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total_num: 4661
succeed_num: 4661
failed_num: 0
timeout_num: 0
Tested-by: Hulk Robot <[email protected]>
On Wed, Mar 10, 2021 at 02:24:08PM +0100, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.180 release.
> There are 39 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Compiled and booted with no regressions on x86_64.
Tested-by: Ross Schmidt <[email protected]>
thanks,
Ross
On Wed, 10 Mar 2021 at 18:56, <[email protected]> wrote:
>
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.19.180 release.
> There are 39 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Mar 2021 13:23:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.180-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
Summary
------------------------------------------------------------------------
kernel: 4.19.180-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: fffeea4063954b09866c112dad21a991ba52a914
git describe: v4.19.179-40-gfffeea406395
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.179-40-gfffeea406395
No regressions (compared to build v4.19.179)
No fixes (compared to build v4.19.179)
Ran 50816 total tests in the following environments and test suites.
Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- nxp-ls2088
- nxp-ls2088-64k_page_size
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- s390
- sparc
- x15 - arm
- x86_64
- x86-kasan
- x86_64
Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-kvm
* kselftest-lkdtm
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* v4l2-compliance
* fwts
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-zram
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-math-tests
* network-basic-tests
* perf
* kselftest-kexec
* kselftest-vm
* kselftest-x86
* ltp-open-posix-tests
* kvm-unit-tests
* rcutorture
* ssuite
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
--
Linaro LKFT
https://lkft.linaro.org