From: Arnd Bergmann <[email protected]>
I had investigated dropping support for alpha EV5 and earlier a while
ago after noticing that this is the only supported CPU family
in the kernel without native byte access and that Debian has already
dropped support for this generation last year [1] after it turned
out to be broken.
This topic came up again when Paul E. McKenney noticed that
parts of the RCU code already rely on byte access and do not
work on alpha EV5 reliably, so I refreshed my series now for
inclusion into the next merge window.
Al Viro did another series for alpha to address all the known build
issues. I rebased his patches without any further changes and included
it as a baseline for my work here to avoid conflicts.
Arnd
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1036158
[2] https://lore.kernel.org/lkml/b67e79d4-06cb-4a45-a906-b9e0fbae22c5@paulmck-laptop/
Al Viro (9):
alpha: sort scr_mem{cpy,move}w() out
alpha: fix modversions for strcpy() et.al.
alpha: add clone3() support
alpha: don't make functions public without a reason
alpha: sys_sio: fix misspelled ifdefs
alpha: missing includes
alpha: core_lca: take the unused functions out
alpha: jensen, t2 - make __EXTERN_INLINE same as for the rest
alpha: trim the unused stuff from asm-offsets.c
Arnd Bergmann (5):
alpha: remove DECpc AXP150 (Jensen) support
alpha: sable: remove early machine support
alpha: remove LCA and APECS based machines
alpha: cabriolet: remove EV5 CPU support
alpha: drop pre-EV56 support
Documentation/driver-api/eisa.rst | 4 +-
arch/alpha/Kconfig | 175 +-------
arch/alpha/Makefile | 8 +-
arch/alpha/include/asm/core_apecs.h | 534 -------------------------
arch/alpha/include/asm/core_lca.h | 378 -----------------
arch/alpha/include/asm/core_t2.h | 8 -
arch/alpha/include/asm/dma-mapping.h | 4 -
arch/alpha/include/asm/dma.h | 9 +-
arch/alpha/include/asm/elf.h | 4 +-
arch/alpha/include/asm/io.h | 26 +-
arch/alpha/include/asm/irq.h | 10 +-
arch/alpha/include/asm/jensen.h | 363 -----------------
arch/alpha/include/asm/machvec.h | 9 -
arch/alpha/include/asm/mmu_context.h | 45 +--
arch/alpha/include/asm/special_insns.h | 5 +-
arch/alpha/include/asm/tlbflush.h | 41 +-
arch/alpha/include/asm/uaccess.h | 80 ----
arch/alpha/include/asm/vga.h | 2 +
arch/alpha/include/uapi/asm/compiler.h | 18 -
arch/alpha/kernel/Makefile | 25 +-
arch/alpha/kernel/asm-offsets.c | 21 +-
arch/alpha/kernel/bugs.c | 1 +
arch/alpha/kernel/console.c | 1 +
arch/alpha/kernel/core_apecs.c | 420 -------------------
arch/alpha/kernel/core_cia.c | 6 +-
arch/alpha/kernel/core_irongate.c | 1 -
arch/alpha/kernel/core_lca.c | 517 ------------------------
arch/alpha/kernel/core_marvel.c | 2 +-
arch/alpha/kernel/core_t2.c | 2 +-
arch/alpha/kernel/core_wildfire.c | 8 +-
arch/alpha/kernel/entry.S | 1 +
arch/alpha/kernel/io.c | 19 +
arch/alpha/kernel/irq.c | 1 +
arch/alpha/kernel/irq_i8259.c | 4 -
arch/alpha/kernel/machvec_impl.h | 25 +-
arch/alpha/kernel/pci-noop.c | 113 ------
arch/alpha/kernel/pci_impl.h | 4 +-
arch/alpha/kernel/perf_event.c | 2 +-
arch/alpha/kernel/proto.h | 44 +-
arch/alpha/kernel/setup.c | 109 +----
arch/alpha/kernel/smc37c669.c | 6 +-
arch/alpha/kernel/smc37c93x.c | 2 +
arch/alpha/kernel/smp.c | 1 +
arch/alpha/kernel/srmcons.c | 2 +
arch/alpha/kernel/sys_cabriolet.c | 87 +---
arch/alpha/kernel/sys_eb64p.c | 238 -----------
arch/alpha/kernel/sys_jensen.c | 237 -----------
arch/alpha/kernel/sys_mikasa.c | 57 ---
arch/alpha/kernel/sys_nautilus.c | 8 +-
arch/alpha/kernel/sys_noritake.c | 60 ---
arch/alpha/kernel/sys_sable.c | 294 +-------------
arch/alpha/kernel/sys_sio.c | 486 ----------------------
arch/alpha/kernel/syscalls/syscall.tbl | 2 +-
arch/alpha/kernel/traps.c | 64 ---
arch/alpha/lib/Makefile | 14 -
arch/alpha/lib/checksum.c | 1 +
arch/alpha/lib/fpreg.c | 1 +
arch/alpha/lib/memcpy.c | 3 +
arch/alpha/lib/stycpy.S | 11 +
arch/alpha/lib/styncpy.S | 11 +
arch/alpha/math-emu/math.c | 7 +-
arch/alpha/mm/init.c | 2 +-
drivers/char/agp/alpha-agp.c | 2 +-
drivers/eisa/Kconfig | 9 +-
drivers/eisa/virtual_root.c | 2 +-
drivers/input/serio/i8042-io.h | 5 +-
drivers/tty/serial/8250/8250.h | 3 -
drivers/tty/serial/8250/8250_alpha.c | 21 -
drivers/tty/serial/8250/8250_core.c | 4 -
drivers/tty/serial/8250/Makefile | 2 -
include/linux/blk_types.h | 6 -
include/linux/tty.h | 14 +-
72 files changed, 166 insertions(+), 4545 deletions(-)
delete mode 100644 arch/alpha/include/asm/core_apecs.h
delete mode 100644 arch/alpha/include/asm/core_lca.h
delete mode 100644 arch/alpha/include/asm/jensen.h
delete mode 100644 arch/alpha/kernel/core_apecs.c
delete mode 100644 arch/alpha/kernel/core_lca.c
delete mode 100644 arch/alpha/kernel/pci-noop.c
delete mode 100644 arch/alpha/kernel/sys_eb64p.c
delete mode 100644 arch/alpha/kernel/sys_jensen.c
delete mode 100644 arch/alpha/kernel/sys_sio.c
create mode 100644 arch/alpha/lib/stycpy.S
create mode 100644 arch/alpha/lib/styncpy.S
delete mode 100644 drivers/tty/serial/8250/8250_alpha.c
--
2.39.2
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: "Paul E. McKenney" <[email protected]>
Cc: [email protected]
Cc: [email protected]
From: Al Viro <[email protected]>
.. and missing externs in proto.h
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/kernel/bugs.c | 1 +
arch/alpha/kernel/console.c | 1 +
arch/alpha/kernel/core_irongate.c | 1 -
arch/alpha/kernel/irq.c | 1 +
arch/alpha/kernel/pci-noop.c | 1 +
arch/alpha/kernel/proto.h | 31 +++++++++++++++++++++++++++----
arch/alpha/kernel/smc37c669.c | 2 ++
arch/alpha/kernel/smc37c93x.c | 2 ++
arch/alpha/kernel/smp.c | 1 +
arch/alpha/kernel/srmcons.c | 2 ++
arch/alpha/kernel/sys_nautilus.c | 2 --
arch/alpha/lib/checksum.c | 1 +
arch/alpha/lib/fpreg.c | 1 +
arch/alpha/lib/memcpy.c | 3 +++
arch/alpha/math-emu/math.c | 7 +------
arch/alpha/mm/init.c | 2 +-
16 files changed, 45 insertions(+), 14 deletions(-)
diff --git a/arch/alpha/kernel/bugs.c b/arch/alpha/kernel/bugs.c
index 08cc10d7fa17..e8c51089325f 100644
--- a/arch/alpha/kernel/bugs.c
+++ b/arch/alpha/kernel/bugs.c
@@ -1,6 +1,7 @@
#include <asm/hwrpb.h>
#include <linux/device.h>
+#include <linux/cpu.h>
#ifdef CONFIG_SYSFS
diff --git a/arch/alpha/kernel/console.c b/arch/alpha/kernel/console.c
index 5476279329a6..4193f76e9633 100644
--- a/arch/alpha/kernel/console.c
+++ b/arch/alpha/kernel/console.c
@@ -15,6 +15,7 @@
#include <asm/machvec.h>
#include "pci_impl.h"
+#include "proto.h"
#ifdef CONFIG_VGA_HOSE
diff --git a/arch/alpha/kernel/core_irongate.c b/arch/alpha/kernel/core_irongate.c
index 6b8ed12936b6..05dc4c1b9074 100644
--- a/arch/alpha/kernel/core_irongate.c
+++ b/arch/alpha/kernel/core_irongate.c
@@ -226,7 +226,6 @@ albacore_init_arch(void)
if (memtop > pci_mem) {
#ifdef CONFIG_BLK_DEV_INITRD
extern unsigned long initrd_start, initrd_end;
- extern void *move_initrd(unsigned long);
/* Move the initrd out of the way. */
if (initrd_end && __pa(initrd_end) > pci_mem) {
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 15f2effd6baf..c67047c5d830 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -28,6 +28,7 @@
#include <asm/io.h>
#include <linux/uaccess.h>
+#include "irq_impl.h"
volatile unsigned long irq_err_count;
DEFINE_PER_CPU(unsigned long, irq_pmi_count);
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
index ae82061edae9..32ca59a5a704 100644
--- a/arch/alpha/kernel/pci-noop.c
+++ b/arch/alpha/kernel/pci-noop.c
@@ -17,6 +17,7 @@
#include <linux/scatterlist.h>
#include <linux/syscalls.h>
+#include "pci_impl.h"
#include "proto.h"
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 2c89c1c55712..5b1d0d71d479 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -15,6 +15,7 @@ struct pt_regs;
struct task_struct;
struct pci_dev;
struct pci_controller;
+struct pci_bus;
/* core_apecs.c */
extern struct pci_ops apecs_pci_ops;
@@ -114,6 +115,9 @@ extern int boot_cpuid;
#ifdef CONFIG_VERBOSE_MCHECK
extern unsigned long alpha_verbose_mcheck;
#endif
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void * __init move_initrd(unsigned long);
+#endif
extern struct screen_info vgacon_screen_info;
/* srmcons.c */
@@ -128,6 +132,7 @@ extern void unregister_srm_console(void);
/* smp.c */
extern void setup_smp(void);
extern void handle_ipi(struct pt_regs *);
+extern void __init smp_callin(void);
/* bios32.c */
/* extern void reset_for_srm(void); */
@@ -139,13 +144,13 @@ extern void common_init_rtc(void);
extern unsigned long est_cycle_freq;
/* smc37c93x.c */
-extern void SMC93x_Init(void);
+extern int __init SMC93x_Init(void);
/* smc37c669.c */
-extern void SMC669_Init(int);
+extern void __init SMC669_Init(int);
/* es1888.c */
-extern void es1888_init(void);
+extern void __init es1888_init(void);
/* ../lib/fpreg.c */
extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
@@ -166,19 +171,37 @@ extern void entSys(void);
extern void entUna(void);
extern void entDbg(void);
+/* pci.c */
+extern void pcibios_claim_one_bus(struct pci_bus *);
+
/* ptrace.c */
extern int ptrace_set_bpt (struct task_struct *child);
extern int ptrace_cancel_bpt (struct task_struct *child);
+extern void syscall_trace_leave(void);
+extern unsigned long syscall_trace_enter(void);
+
+/* signal.c */
+struct sigcontext;
+extern void do_sigreturn(struct sigcontext __user *);
+struct rt_sigframe;
+extern void do_rt_sigreturn(struct rt_sigframe __user *);
+extern void do_work_pending(struct pt_regs *, unsigned long, unsigned long, unsigned long);
/* traps.c */
extern void dik_show_regs(struct pt_regs *regs, unsigned long *r9_15);
extern void die_if_kernel(char *, struct pt_regs *, long, unsigned long *);
+extern void do_entInt(unsigned long, unsigned long, unsigned long, struct pt_regs *);
+extern void do_entArith(unsigned long, unsigned long, struct pt_regs *);
+extern void do_entIF(unsigned long, struct pt_regs *);
+extern void do_entDbg(struct pt_regs *);
+struct allregs;
+extern void do_entUna(void *, unsigned long, unsigned long, struct allregs *);
+extern void do_entUnaUser(void __user *, unsigned long, unsigned long, struct pt_regs *);
/* sys_titan.c */
extern void titan_dispatch_irqs(u64);
/* ../mm/init.c */
-extern void switch_to_system_map(void);
extern void srm_paging_stop(void);
static inline int
diff --git a/arch/alpha/kernel/smc37c669.c b/arch/alpha/kernel/smc37c669.c
index cb8726b667da..a5a6ed97a6ce 100644
--- a/arch/alpha/kernel/smc37c669.c
+++ b/arch/alpha/kernel/smc37c669.c
@@ -11,6 +11,8 @@
#include <asm/hwrpb.h>
#include <asm/io.h>
+#include "proto.h"
+
#if 0
# define DBG_DEVS(args) printk args
#else
diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c
index 71cd7aca38ce..8028273f0d16 100644
--- a/arch/alpha/kernel/smc37c93x.c
+++ b/arch/alpha/kernel/smc37c93x.c
@@ -12,6 +12,8 @@
#include <asm/hwrpb.h>
#include <asm/io.h>
+#include "proto.h"
+
#define SMC_DEBUG 0
#if SMC_DEBUG
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 8e9dd63b220c..ed06367ece57 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -38,6 +38,7 @@
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
#include "proto.h"
#include "irq_impl.h"
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index feaf89f6936b..3e61073f4b30 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -21,6 +21,8 @@
#include <asm/console.h>
#include <linux/uaccess.h>
+#include "proto.h"
+
static DEFINE_SPINLOCK(srmcons_callback_lock);
static int srm_is_registered_console = 0;
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index 4dcee81606a5..13b79960b4b9 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -184,8 +184,6 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
mb();
}
-extern void pcibios_claim_one_bus(struct pci_bus *);
-
static struct resource irongate_mem = {
.name = "Irongate PCI MEM",
.flags = IORESOURCE_MEM,
diff --git a/arch/alpha/lib/checksum.c b/arch/alpha/lib/checksum.c
index 3f35c3ed6948..17fa230baeef 100644
--- a/arch/alpha/lib/checksum.c
+++ b/arch/alpha/lib/checksum.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/string.h>
+#include <net/checksum.h>
#include <asm/byteorder.h>
diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c
index 7c08b225261c..eee11fb4c7f1 100644
--- a/arch/alpha/lib/fpreg.c
+++ b/arch/alpha/lib/fpreg.c
@@ -9,6 +9,7 @@
#include <linux/export.h>
#include <linux/preempt.h>
#include <asm/thread_info.h>
+#include <asm/fpu.h>
#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
#define STT(reg,val) asm volatile ("ftoit $f"#reg",%0" : "=r"(val));
diff --git a/arch/alpha/lib/memcpy.c b/arch/alpha/lib/memcpy.c
index cbac3dc6d963..78b6850a9d53 100644
--- a/arch/alpha/lib/memcpy.c
+++ b/arch/alpha/lib/memcpy.c
@@ -18,6 +18,7 @@
#include <linux/types.h>
#include <linux/export.h>
+#include <linux/string.h>
/*
* This should be done in one go with ldq_u*2/mask/stq_u. Do it
@@ -150,6 +151,8 @@ static inline void __memcpy_aligned_dn (unsigned long d, unsigned long s,
DO_REST_ALIGNED_DN(d,s,n);
}
+#undef memcpy
+
void * memcpy(void * dest, const void *src, size_t n)
{
if (!(((unsigned long) dest ^ (unsigned long) src) & 7)) {
diff --git a/arch/alpha/math-emu/math.c b/arch/alpha/math-emu/math.c
index 4212258f3cfd..68d420bfd3c0 100644
--- a/arch/alpha/math-emu/math.c
+++ b/arch/alpha/math-emu/math.c
@@ -4,6 +4,7 @@
#include <linux/kernel.h>
#include <linux/sched.h>
#include <asm/ptrace.h>
+#include <asm/fpu.h>
#include <linux/uaccess.h>
@@ -45,12 +46,6 @@
#define MISC_TRAPB 0x0000
#define MISC_EXCB 0x0400
-extern unsigned long alpha_read_fp_reg (unsigned long reg);
-extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
-extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
-extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);
-
-
#ifdef MODULE
MODULE_DESCRIPTION("FP Software completion module");
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index a155180d7a83..4fe618446e4c 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -33,7 +33,7 @@
#include <asm/setup.h>
#include <asm/sections.h>
-extern void die_if_kernel(char *,struct pt_regs *,long);
+#include "../kernel/proto.h"
static struct pcb_struct original_pcb;
--
2.39.2
From: Al Viro <[email protected]>
Take scr_memmove() out of line, make both it and scr_memcpyw()
conditional upon VGA_CONSOLE or MDA_CONSOLE (if neither is
selected, we are certain to be working with the kernel-allocated
buffer rather than VRAM and defaults will work just fine).
That allows to clean vt_buffer.h, but that's a separate story
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/include/asm/vga.h | 2 ++
arch/alpha/kernel/io.c | 19 +++++++++++++++++++
2 files changed, 21 insertions(+)
diff --git a/arch/alpha/include/asm/vga.h b/arch/alpha/include/asm/vga.h
index 4c347a8454c7..919931cb5b63 100644
--- a/arch/alpha/include/asm/vga.h
+++ b/arch/alpha/include/asm/vga.h
@@ -13,6 +13,7 @@
#define VT_BUF_HAVE_RW
#define VT_BUF_HAVE_MEMSETW
#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
static inline void scr_writew(u16 val, volatile u16 *addr)
{
@@ -40,6 +41,7 @@ static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
/* Do not trust that the usage will be correct; analyze the arguments. */
extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count);
+extern void scr_memmovew(u16 *d, const u16 *s, unsigned int count);
/* ??? These are currently only used for downloading character sets. As
such, they don't need memory barriers. Is this all they are intended
diff --git a/arch/alpha/kernel/io.c b/arch/alpha/kernel/io.c
index eda09778268f..c28035d6d1e6 100644
--- a/arch/alpha/kernel/io.c
+++ b/arch/alpha/kernel/io.c
@@ -647,6 +647,10 @@ void _memset_c_io(volatile void __iomem *to, unsigned long c, long count)
EXPORT_SYMBOL(_memset_c_io);
+#if IS_ENABLED(CONFIG_VGA_CONSOLE) || IS_ENABLED(CONFIG_MDA_CONSOLE)
+
+#include <asm/vga.h>
+
/* A version of memcpy used by the vga console routines to move data around
arbitrarily between screen and main memory. */
@@ -681,6 +685,21 @@ scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
EXPORT_SYMBOL(scr_memcpyw);
+void scr_memmovew(u16 *d, const u16 *s, unsigned int count)
+{
+ if (d < s)
+ scr_memcpyw(d, s, count);
+ else {
+ count /= 2;
+ d += count;
+ s += count;
+ while (count--)
+ scr_writew(scr_readw(--s), --d);
+ }
+}
+EXPORT_SYMBOL(scr_memmovew);
+#endif
+
void __iomem *ioport_map(unsigned long port, unsigned int size)
{
return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
--
2.39.2
From: Al Viro <[email protected]>
definitions of avanti_mv and noname_mv (and associated ALIAS_MV)
are conditional upon the wrong thing - it should be
CONFIG_ALPHA_{AVANTI,NONAME}_CH, not CONFIG_ALPHA_{AVANTI,NONAME}.
The former is a system type; the latter is for the bits shared
by AVANTI with XL and NONAME with ALPHA_BOOK1 resp.
We want all those machine vectors defined (but not aliased - see
ALIAS_MV() definition for details) for GENERIC build; for
system-specfic builds we want only one mv, so avanti_mv should *not*
be there for XL; it certainly should not be have alpha_mv aliased to
it on such config - xl_mv will be there and alpha_mv can't be aliased
to both of those.
The same goes for Noname vs. Alphabook1.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/kernel/sys_sio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
index 0bf38f868665..c28a6ae1d989 100644
--- a/arch/alpha/kernel/sys_sio.c
+++ b/arch/alpha/kernel/sys_sio.c
@@ -360,7 +360,7 @@ struct alpha_machine_vector alphabook1_mv __initmv = {
ALIAS_MV(alphabook1)
#endif
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI)
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI_CH)
struct alpha_machine_vector avanti_mv __initmv = {
.vector_name = "Avanti",
DO_EV4_MMU,
@@ -389,7 +389,7 @@ struct alpha_machine_vector avanti_mv __initmv = {
ALIAS_MV(avanti)
#endif
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME)
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME_CH)
struct alpha_machine_vector noname_mv __initmv = {
.vector_name = "Noname",
DO_EV4_MMU,
--
2.39.2
From: Al Viro <[email protected]>
the only user had been drivers/char/h8.c, and that got taken out
and shot back in 2004...
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/kernel/core_lca.c | 44 ------------------------------------
1 file changed, 44 deletions(-)
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c
index 57e0750419f2..4616b11643d5 100644
--- a/arch/alpha/kernel/core_lca.c
+++ b/arch/alpha/kernel/core_lca.c
@@ -471,47 +471,3 @@ lca_machine_check(unsigned long vector, unsigned long la_ptr)
}
#endif /* CONFIG_VERBOSE_MCHECK */
}
-
-/*
- * The following routines are needed to support the SPEED changing
- * necessary to successfully manage the thermal problem on the AlphaBook1.
- */
-
-void
-lca_clock_print(void)
-{
- long pmr_reg;
-
- pmr_reg = LCA_READ_PMR;
-
- printk("Status of clock control:\n");
- printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
- printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
- printk("\tInterrupt override is %s\n",
- (pmr_reg & LCA_PMR_INTO) ? "on" : "off");
- printk("\tDMA override is %s\n",
- (pmr_reg & LCA_PMR_DMAO) ? "on" : "off");
-
-}
-
-int
-lca_get_clock(void)
-{
- long pmr_reg;
-
- pmr_reg = LCA_READ_PMR;
- return(LCA_GET_PRIMARY(pmr_reg));
-
-}
-
-void
-lca_clock_fiddle(int divisor)
-{
- long pmr_reg;
-
- pmr_reg = LCA_READ_PMR;
- LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
- /* lca_norm_clock = divisor; */
- LCA_WRITE_PMR(pmr_reg);
- mb();
-}
--
2.39.2
From: Al Viro <[email protected]>
Out of 21 constants, only 6 are used...
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/kernel/asm-offsets.c | 21 +--------------------
1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index bf1eedd27cf7..4cfeae42c79a 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -10,35 +10,16 @@
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/kbuild.h>
-#include <asm/io.h>
+#include <asm/machvec.h>
static void __used foo(void)
{
- DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
- DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_FP, offsetof(struct thread_info, fp));
DEFINE(TI_STATUS, offsetof(struct thread_info, status));
BLANK();
- DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
- DEFINE(TASK_CRED, offsetof(struct task_struct, cred));
- DEFINE(TASK_REAL_PARENT, offsetof(struct task_struct, real_parent));
- DEFINE(TASK_GROUP_LEADER, offsetof(struct task_struct, group_leader));
- DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
- BLANK();
-
- DEFINE(CRED_UID, offsetof(struct cred, uid));
- DEFINE(CRED_EUID, offsetof(struct cred, euid));
- DEFINE(CRED_GID, offsetof(struct cred, gid));
- DEFINE(CRED_EGID, offsetof(struct cred, egid));
- BLANK();
-
DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
- DEFINE(PT_PTRACED, PT_PTRACED);
- DEFINE(CLONE_VM, CLONE_VM);
- DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
- DEFINE(SIGCHLD, SIGCHLD);
BLANK();
DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));
--
2.39.2
From: Al Viro <[email protected]>
We want io.h primitives (readb(), etc.) to be extern inline.
However, that requires the backing out-of-line implementation
somewhere, preferably kept in sync with the inline ones.
The way it's done is __EXTERN_INLINE macro that defaults to
extern inline, but can be overridden in compilation unit where
the out-of-line instance will be.
That works, but it's brittle - we *must* make sure that asm/io.h
is the very first include in such compilation units. There'd
been a bunch of bugs of that sort in the past.
Another issue is the choice of overriding definition for
__EXTERN_INLINE; it must be either 'inline' or empty. Either
will do for compilation purposes - inline void foo(...) {...}
(without extern or static) is going to generate out-of-line
instance. The difference is that 'definition without a
prototype' heuristics trigger on
void foo(void)
{
...
}
but not on
inline void foo(void)
{
...
}
Most of the overrides go for 'inline'; in two cases (sys_jensen
and core_t2) __EXTERN_INLINE is defined as empty. Without
-Wmissing-prototypes it didn't matter, but now that we have
that thing always on...
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/kernel/core_t2.c | 2 +-
arch/alpha/kernel/sys_jensen.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
index 98d5b6ff8a76..3d72d90624f1 100644
--- a/arch/alpha/kernel/core_t2.c
+++ b/arch/alpha/kernel/core_t2.c
@@ -10,7 +10,7 @@
* Code common to all T2 core logic chips.
*/
-#define __EXTERN_INLINE
+#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_t2.h>
#undef __EXTERN_INLINE
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index 5c9c88428124..a1bb1c4a7e93 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -7,7 +7,7 @@
*
* Code supporting the Jensen.
*/
-#define __EXTERN_INLINE
+#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/jensen.h>
#undef __EXTERN_INLINE
--
2.39.2
From: Arnd Bergmann <[email protected]>
This is one of the hackiest Alpha machines, and the only one without
PCI support. Removing this allows cleaning up code in eise and tty
drivers in addition to the architecture code.
Signed-off-by: Arnd Bergmann <[email protected]>
---
Documentation/driver-api/eisa.rst | 4 +-
arch/alpha/Kconfig | 18 +-
arch/alpha/include/asm/dma-mapping.h | 4 -
arch/alpha/include/asm/io.h | 20 +-
arch/alpha/include/asm/jensen.h | 363 ---------------------------
arch/alpha/kernel/Makefile | 3 +-
arch/alpha/kernel/pci-noop.c | 114 ---------
arch/alpha/kernel/setup.c | 19 +-
arch/alpha/kernel/sys_jensen.c | 237 -----------------
arch/alpha/kernel/traps.c | 33 ---
drivers/eisa/Kconfig | 9 +-
drivers/eisa/virtual_root.c | 2 +-
drivers/input/serio/i8042-io.h | 5 +-
drivers/tty/serial/8250/8250.h | 3 -
drivers/tty/serial/8250/8250_alpha.c | 21 --
drivers/tty/serial/8250/8250_core.c | 4 -
drivers/tty/serial/8250/Makefile | 2 -
17 files changed, 16 insertions(+), 845 deletions(-)
delete mode 100644 arch/alpha/include/asm/jensen.h
delete mode 100644 arch/alpha/kernel/pci-noop.c
delete mode 100644 arch/alpha/kernel/sys_jensen.c
delete mode 100644 drivers/tty/serial/8250/8250_alpha.c
diff --git a/Documentation/driver-api/eisa.rst b/Documentation/driver-api/eisa.rst
index 3eac11b7eb01..b33ebe1ec9ed 100644
--- a/Documentation/driver-api/eisa.rst
+++ b/Documentation/driver-api/eisa.rst
@@ -196,8 +196,8 @@ eisa_bus.disable_dev
virtual_root.force_probe
Force the probing code to probe EISA slots even when it cannot find an
EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
- (don't force), and set to 1 (force probing) when either
- CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
+ (don't force), and set to 1 (force probing) when
+ CONFIG_EISA_VLB_PRIMING is set.
Random notes
============
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 3afd042150f8..9b8d3ce40c28 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -10,7 +10,7 @@ config ALPHA
select ARCH_NO_SG_CHAIN
select ARCH_USE_CMPXCHG_LOCKREF
select DMA_OPS if PCI
- select FORCE_PCI if !ALPHA_JENSEN
+ select FORCE_PCI
select PCI_DOMAINS if PCI
select PCI_SYSCALL if PCI
select HAVE_ASM_MODVERSIONS
@@ -99,7 +99,6 @@ choice
EB64+ EB64+ 21064 evaluation board
EB66 EB66 21066 evaluation board
EB66+ EB66+ 21066 evaluation board
- Jensen DECpc 150, DEC 2000 models 300, 500
LX164 AlphaPC164-LX
Lynx AS 2100A
Miata Personal Workstation 433/500/600 a/au
@@ -198,17 +197,6 @@ config ALPHA_EIGER
Apparently an obscure OEM single-board computer based on the
Typhoon/Tsunami chipset family. Information on it is scanty.
-config ALPHA_JENSEN
- bool "Jensen"
- select HAVE_EISA
- help
- DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
- of the first-generation Alpha systems. A number of these systems
- seem to be available on the second- hand market. The Jensen is a
- floor-standing tower system which originally used a 150MHz 21064 It
- used programmable logic to interface a 486 EISA I/O bridge to the
- CPU.
-
config ALPHA_LX164
bool "LX164"
help
@@ -337,7 +325,7 @@ config ALPHA_NONAME
config ALPHA_EV4
bool
- depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
+ depends on (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
default y if !ALPHA_LYNX
default y if !ALPHA_EV5
@@ -483,7 +471,7 @@ config ALPHA_QEMU
config ALPHA_SRM
bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
depends on TTY
- default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
+ default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
help
There are two different types of booting firmware on Alphas: SRM,
which is command line driven, and ARC, which uses menus and arrow
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 6ce7e2041685..ad5a59b035cb 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -6,11 +6,7 @@ extern const struct dma_map_ops alpha_pci_ops;
static inline const struct dma_map_ops *get_arch_dma_ops(void)
{
-#ifdef CONFIG_ALPHA_JENSEN
- return NULL;
-#else
return &alpha_pci_ops;
-#endif
}
#endif /* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 4f47a5003fe8..0c54ddb5b33e 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -209,8 +209,6 @@ static inline int generic_is_mmio(const volatile void __iomem *a)
# include <asm/core_cia.h>
#elif defined(CONFIG_ALPHA_IRONGATE)
# include <asm/core_irongate.h>
-#elif defined(CONFIG_ALPHA_JENSEN)
-# include <asm/jensen.h>
#elif defined(CONFIG_ALPHA_LCA)
# include <asm/core_lca.h>
#elif defined(CONFIG_ALPHA_MARVEL)
@@ -631,23 +629,7 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
#define outsw outsw
#define outsl outsl
-/*
- * The Alpha Jensen hardware for some rather strange reason puts
- * the RTC clock at 0x170 instead of 0x70. Probably due to some
- * misguided idea about using 0x70 for NMI stuff.
- *
- * These defines will override the defaults when doing RTC queries
- */
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define RTC_PORT(x) ((x) + alpha_mv.rtc_port)
-#else
-# ifdef CONFIG_ALPHA_JENSEN
-# define RTC_PORT(x) (0x170+(x))
-# else
-# define RTC_PORT(x) (0x70 + (x))
-# endif
-#endif
+#define RTC_PORT(x) (0x70 + (x))
#define RTC_ALWAYS_BCD 0
/*
diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h
deleted file mode 100644
index 66eb049eb421..000000000000
--- a/arch/alpha/include/asm/jensen.h
+++ /dev/null
@@ -1,363 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_JENSEN_H
-#define __ALPHA_JENSEN_H
-
-#include <asm/compiler.h>
-
-/*
- * Defines for the AlphaPC EISA IO and memory address space.
- */
-
-/*
- * NOTE! The memory operations do not set any memory barriers, as it's
- * not needed for cases like a frame buffer that is essentially memory-like.
- * You need to do them by hand if the operations depend on ordering.
- *
- * Similarly, the port IO operations do a "mb" only after a write operation:
- * if an mb is needed before (as in the case of doing memory mapped IO
- * first, and then a port IO operation to the same device), it needs to be
- * done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do the
- * mb all the time, but right now I'm hoping this will work out. Avoiding
- * mb's may potentially be a noticeable speed improvement, but I can't
- * honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to non-interrupts
- * is another fun race area. Don't do it (because if you do, I'll have to
- * do *everything* with interrupts disabled, ugh).
- */
-
-/*
- * EISA Interrupt Acknowledge address
- */
-#define EISA_INTA (IDENT_ADDR + 0x100000000UL)
-
-/*
- * FEPROM addresses
- */
-#define EISA_FEPROM0 (IDENT_ADDR + 0x180000000UL)
-#define EISA_FEPROM1 (IDENT_ADDR + 0x1A0000000UL)
-
-/*
- * VL82C106 base address
- */
-#define EISA_VL82C106 (IDENT_ADDR + 0x1C0000000UL)
-
-/*
- * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
- */
-#define EISA_HAE (IDENT_ADDR + 0x1D0000000UL)
-
-/*
- * "SYSCTL" register address
- */
-#define EISA_SYSCTL (IDENT_ADDR + 0x1E0000000UL)
-
-/*
- * "spare" register address
- */
-#define EISA_SPARE (IDENT_ADDR + 0x1F0000000UL)
-
-/*
- * EISA memory address offset
- */
-#define EISA_MEM (IDENT_ADDR + 0x200000000UL)
-
-/*
- * EISA IO address offset
- */
-#define EISA_IO (IDENT_ADDR + 0x300000000UL)
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * Handle the "host address register". This needs to be set
- * to the high 7 bits of the EISA address. This is also needed
- * for EISA IO addresses, which are only 16 bits wide (the
- * hae needs to be set to 0).
- *
- * HAE isn't needed for the local IO operations, though.
- */
-
-#define JENSEN_HAE_ADDRESS EISA_HAE
-#define JENSEN_HAE_MASK 0x1ffffff
-
-__EXTERN_INLINE void jensen_set_hae(unsigned long addr)
-{
- /* hae on the Jensen is bits 31:25 shifted right */
- addr >>= 25;
- if (addr != alpha_mv.hae_cache)
- set_hae(addr);
-}
-
-#define vuip volatile unsigned int *
-#define vulp volatile unsigned long *
-
-/*
- * IO functions
- *
- * The "local" functions are those that don't go out to the EISA bus,
- * but instead act on the VL82C106 chip directly.. This is mainly the
- * keyboard, RTC, printer and first two serial lines..
- *
- * The local stuff makes for some complications, but it seems to be
- * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
- * convinced that I need one of the newer machines.
- */
-
-__EXTERN_INLINE unsigned int jensen_local_inb(unsigned long addr)
-{
- return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
-}
-
-__EXTERN_INLINE void jensen_local_outb(u8 b, unsigned long addr)
-{
- *(vuip)((addr << 9) + EISA_VL82C106) = b;
- mb();
-}
-
-__EXTERN_INLINE unsigned int jensen_bus_inb(unsigned long addr)
-{
- long result;
-
- jensen_set_hae(0);
- result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
- return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void jensen_bus_outb(u8 b, unsigned long addr)
-{
- jensen_set_hae(0);
- *(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
- mb();
-}
-
-/*
- * It seems gcc is not very good at optimizing away logical
- * operations that result in operations across inline functions.
- * Which is why this is a macro.
- */
-
-#define jensen_is_local(addr) ( \
-/* keyboard */ (addr == 0x60 || addr == 0x64) || \
-/* RTC */ (addr == 0x170 || addr == 0x171) || \
-/* mb COM2 */ (addr >= 0x2f8 && addr <= 0x2ff) || \
-/* mb LPT1 */ (addr >= 0x3bc && addr <= 0x3be) || \
-/* mb COM2 */ (addr >= 0x3f8 && addr <= 0x3ff))
-
-__EXTERN_INLINE u8 jensen_inb(unsigned long addr)
-{
- if (jensen_is_local(addr))
- return jensen_local_inb(addr);
- else
- return jensen_bus_inb(addr);
-}
-
-__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr)
-{
- if (jensen_is_local(addr))
- jensen_local_outb(b, addr);
- else
- jensen_bus_outb(b, addr);
-}
-
-__EXTERN_INLINE u16 jensen_inw(unsigned long addr)
-{
- long result;
-
- jensen_set_hae(0);
- result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
- result >>= (addr & 3) * 8;
- return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_inl(unsigned long addr)
-{
- jensen_set_hae(0);
- return *(vuip) ((addr << 7) + EISA_IO + 0x60);
-}
-
-__EXTERN_INLINE u64 jensen_inq(unsigned long addr)
-{
- jensen_set_hae(0);
- return *(vulp) ((addr << 7) + EISA_IO + 0x60);
-}
-
-__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
-{
- jensen_set_hae(0);
- *(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
- mb();
-}
-
-__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
-{
- jensen_set_hae(0);
- *(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
- mb();
-}
-
-__EXTERN_INLINE void jensen_outq(u64 b, unsigned long addr)
-{
- jensen_set_hae(0);
- *(vulp) ((addr << 7) + EISA_IO + 0x60) = b;
- mb();
-}
-
-/*
- * Memory functions.
- */
-
-__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- long result;
-
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
- result >>= (addr & 3) * 8;
- return 0xffUL & result;
-}
-
-__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- long result;
-
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
- result >>= (addr & 3) * 8;
- return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
-}
-
-__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long r0, r1;
-
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- addr = (addr << 7) + EISA_MEM + 0x60;
- r0 = *(vuip) (addr);
- r1 = *(vuip) (addr + (4 << 7));
- return r1 << 32 | r0;
-}
-
-__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- *(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
-}
-
-__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- *(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
-}
-
-__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- *(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
-}
-
-__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- addr = (addr << 7) + EISA_MEM + 0x60;
- *(vuip) (addr) = b;
- *(vuip) (addr + (4 << 7)) = b >> 32;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr,
- unsigned long size)
-{
- return (void __iomem *)(addr + 0x100000000ul);
-}
-
-__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
-{
- return (long)addr >= 0;
-}
-
-__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
-{
- return (unsigned long)addr >= 0x100000000ul;
-}
-
-/* New-style ioread interface. All the routines are so ugly for Jensen
- that it doesn't make sense to merge them. */
-
-#define IOPORT(OS, NS) \
-__EXTERN_INLINE u##NS jensen_ioread##NS(const void __iomem *xaddr) \
-{ \
- if (jensen_is_mmio(xaddr)) \
- return jensen_read##OS(xaddr - 0x100000000ul); \
- else \
- return jensen_in##OS((unsigned long)xaddr); \
-} \
-__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr) \
-{ \
- if (jensen_is_mmio(xaddr)) \
- jensen_write##OS(b, xaddr - 0x100000000ul); \
- else \
- jensen_out##OS(b, (unsigned long)xaddr); \
-}
-
-IOPORT(b, 8)
-IOPORT(w, 16)
-IOPORT(l, 32)
-IOPORT(q, 64)
-
-#undef IOPORT
-
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX jensen
-#define jensen_trivial_rw_bw 0
-#define jensen_trivial_rw_lq 0
-#define jensen_trivial_io_bw 0
-#define jensen_trivial_io_lq 0
-#define jensen_trivial_iounmap 1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_JENSEN_H */
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index fb4efec7cbc7..4b31060e1711 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -27,7 +27,7 @@ obj-y += core_apecs.o core_cia.o core_irongate.o core_lca.o \
core_tsunami.o
obj-y += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
- sys_jensen.o sys_miata.o sys_mikasa.o sys_nautilus.o \
+ sys_miata.o sys_mikasa.o sys_nautilus.o \
sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
@@ -78,7 +78,6 @@ obj-$(CONFIG_ALPHA_TITAN) += sys_titan.o irq_i8259.o smc37c669.o
obj-$(CONFIG_ALPHA_EB64P) += sys_eb64p.o irq_i8259.o
obj-$(CONFIG_ALPHA_EB66) += sys_eb64p.o irq_i8259.o
obj-$(CONFIG_ALPHA_EIGER) += sys_eiger.o irq_i8259.o
-obj-$(CONFIG_ALPHA_JENSEN) += sys_jensen.o pci-noop.o irq_i8259.o
obj-$(CONFIG_ALPHA_MARVEL) += sys_marvel.o
obj-$(CONFIG_ALPHA_MIATA) += sys_miata.o irq_pyxis.o irq_i8259.o \
es1888.o smc37c669.o
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
deleted file mode 100644
index 32ca59a5a704..000000000000
--- a/arch/alpha/kernel/pci-noop.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/pci-noop.c
- *
- * Stub PCI interfaces for Jensen-specific kernels.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/gfp.h>
-#include <linux/capability.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/syscalls.h>
-
-#include "pci_impl.h"
-#include "proto.h"
-
-
-/*
- * The PCI controller list.
- */
-
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
-
-
-struct pci_controller * __init
-alloc_pci_controller(void)
-{
- struct pci_controller *hose;
-
- hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
- if (!hose)
- panic("%s: Failed to allocate %zu bytes\n", __func__,
- sizeof(*hose));
-
- *hose_tail = hose;
- hose_tail = &hose->next;
-
- return hose;
-}
-
-struct resource * __init
-alloc_resource(void)
-{
- void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-
- if (!ptr)
- panic("%s: Failed to allocate %zu bytes\n", __func__,
- sizeof(struct resource));
-
- return ptr;
-}
-
-SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus,
- unsigned long, dfn)
-{
- struct pci_controller *hose;
-
- /* from hose or from bus.devfn */
- if (which & IOBASE_FROM_HOSE) {
- for (hose = hose_head; hose; hose = hose->next)
- if (hose->index == bus)
- break;
- if (!hose)
- return -ENODEV;
- } else {
- /* Special hook for ISA access. */
- if (bus == 0 && dfn == 0)
- hose = pci_isa_hose;
- else
- return -ENODEV;
- }
-
- switch (which & ~IOBASE_FROM_HOSE) {
- case IOBASE_HOSE:
- return hose->index;
- case IOBASE_SPARSE_MEM:
- return hose->sparse_mem_base;
- case IOBASE_DENSE_MEM:
- return hose->dense_mem_base;
- case IOBASE_SPARSE_IO:
- return hose->sparse_io_base;
- case IOBASE_DENSE_IO:
- return hose->dense_io_base;
- case IOBASE_ROOT_BUS:
- return hose->bus->number;
- }
-
- return -EOPNOTSUPP;
-}
-
-SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
- unsigned long, off, unsigned long, len, void __user *, buf)
-{
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- else
- return -ENODEV;
-}
-
-SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
- unsigned long, off, unsigned long, len, void __user *, buf)
-{
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- else
- return -ENODEV;
-}
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 0738f9396f95..6e6c842ef07c 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -181,7 +181,6 @@ WEAK(eb64p_mv);
WEAK(eb66_mv);
WEAK(eb66p_mv);
WEAK(eiger_mv);
-WEAK(jensen_mv);
WEAK(lx164_mv);
WEAK(lynx_mv);
WEAK(marvel_ev7_mv);
@@ -224,7 +223,7 @@ static void __init
reserve_std_resources(void)
{
static struct resource standard_io_resources[] = {
- { .name = "rtc", .start = -1, .end = -1 },
+ { .name = "rtc", .start = 0x70, .end = 0x7f},
{ .name = "dma1", .start = 0x00, .end = 0x1f },
{ .name = "pic1", .start = 0x20, .end = 0x3f },
{ .name = "timer", .start = 0x40, .end = 0x5f },
@@ -246,10 +245,6 @@ reserve_std_resources(void)
}
}
- /* Fix up for the Jensen's queer RTC placement. */
- standard_io_resources[0].start = RTC_PORT(0);
- standard_io_resources[0].end = RTC_PORT(0) + 0x0f;
-
for (i = 0; i < ARRAY_SIZE(standard_io_resources); ++i)
request_resource(io, standard_io_resources+i);
}
@@ -486,14 +481,7 @@ setup_arch(char **cmdline_p)
/*
* Locate the command line.
*/
- /* Hack for Jensen... since we're restricted to 8 or 16 chars for
- boot flags depending on the boot mode, we need some shorthand.
- This should do for installation. */
- if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
- strscpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof(command_line));
- } else {
- strscpy(command_line, COMMAND_LINE, sizeof(command_line));
- }
+ strscpy(command_line, COMMAND_LINE, sizeof(command_line));
strcpy(boot_command_line, command_line);
*cmdline_p = command_line;
@@ -745,7 +733,7 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
NULL, /* Ruby */
NULL, /* Flamingo */
NULL, /* Mannequin */
- &jensen_mv,
+ NULL, /* Jensens */
NULL, /* Pelican */
NULL, /* Morgan */
NULL, /* Sable -- see below. */
@@ -943,7 +931,6 @@ get_sysvec_byname(const char *name)
&eb66_mv,
&eb66p_mv,
&eiger_mv,
- &jensen_mv,
&lx164_mv,
&lynx_mv,
&miata_mv,
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
deleted file mode 100644
index a1bb1c4a7e93..000000000000
--- a/arch/alpha/kernel/sys_jensen.c
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/sys_jensen.c
- *
- * Copyright (C) 1995 Linus Torvalds
- * Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the Jensen.
- */
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/jensen.h>
-#undef __EXTERN_INLINE
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/*
- * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and
- * 0x9X0 for the local motherboard interrupts.
- *
- * Note especially that those local interrupts CANNOT be masked,
- * which causes much of the pain below...
- *
- * 0x660 - NMI
- *
- * 0x800 - IRQ0 interval timer (not used, as we use the RTC timer)
- * 0x810 - IRQ1 line printer (duh..)
- * 0x860 - IRQ6 floppy disk
- *
- * 0x900 - COM1
- * 0x920 - COM2
- * 0x980 - keyboard
- * 0x990 - mouse
- *
- * PCI-based systems are more sane: they don't have the local
- * interrupts at all, and have only normal PCI interrupts from
- * devices. Happily it's easy enough to do a sane mapping from the
- * Jensen.
- *
- * Note that this means that we may have to do a hardware
- * "local_op" to a different interrupt than we report to the rest of the
- * world.
- */
-
-static void
-jensen_local_enable(struct irq_data *d)
-{
- /* the parport is really hw IRQ 1, silly Jensen. */
- if (d->irq == 7)
- i8259a_enable_irq(d);
-}
-
-static void
-jensen_local_disable(struct irq_data *d)
-{
- /* the parport is really hw IRQ 1, silly Jensen. */
- if (d->irq == 7)
- i8259a_disable_irq(d);
-}
-
-static void
-jensen_local_mask_ack(struct irq_data *d)
-{
- /* the parport is really hw IRQ 1, silly Jensen. */
- if (d->irq == 7)
- i8259a_mask_and_ack_irq(d);
-}
-
-static struct irq_chip jensen_local_irq_type = {
- .name = "LOCAL",
- .irq_unmask = jensen_local_enable,
- .irq_mask = jensen_local_disable,
- .irq_mask_ack = jensen_local_mask_ack,
-};
-
-static void
-jensen_device_interrupt(unsigned long vector)
-{
- int irq;
-
- switch (vector) {
- case 0x660:
- printk("Whee.. NMI received. Probable hardware error\n");
- printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
- return;
-
- /* local device interrupts: */
- case 0x900: irq = 4; break; /* com1 -> irq 4 */
- case 0x920: irq = 3; break; /* com2 -> irq 3 */
- case 0x980: irq = 1; break; /* kbd -> irq 1 */
- case 0x990: irq = 9; break; /* mouse -> irq 9 */
-
- default:
- if (vector > 0x900) {
- printk("Unknown local interrupt %lx\n", vector);
- return;
- }
-
- irq = (vector - 0x800) >> 4;
- if (irq == 1)
- irq = 7;
- break;
- }
-
- /* If there is no handler yet... */
- if (!irq_has_action(irq)) {
- /* If it is a local interrupt that cannot be masked... */
- if (vector >= 0x900)
- {
- /* Clear keyboard/mouse state */
- inb(0x64);
- inb(0x60);
- /* Reset serial ports */
- inb(0x3fa);
- inb(0x2fa);
- outb(0x0c, 0x3fc);
- outb(0x0c, 0x2fc);
- /* Clear NMI */
- outb(0,0x61);
- outb(0,0x461);
- }
- }
-
-#if 0
- /* A useful bit of code to find out if an interrupt is going wild. */
- {
- static unsigned int last_msg = 0, last_cc = 0;
- static int last_irq = -1, count = 0;
- unsigned int cc;
-
- __asm __volatile("rpcc %0" : "=r"(cc));
- ++count;
-#define JENSEN_CYCLES_PER_SEC (150000000)
- if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) ||
- irq != last_irq) {
- printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n",
- irq, count, cc-last_cc, get_irq_regs()->pc);
- count = 0;
- last_msg = cc;
- last_irq = irq;
- }
- last_cc = cc;
- }
-#endif
-
- handle_irq(irq);
-}
-
-static void __init
-jensen_init_irq(void)
-{
- init_i8259a_irqs();
-
- irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
- irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
- irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
- irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
- irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
-
- common_init_isa_dma();
-}
-
-static void __init
-jensen_init_arch(void)
-{
- struct pci_controller *hose;
-#ifdef CONFIG_PCI
- static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, };
-
- isa_bridge = &fake_isa_bridge;
-#endif
-
- /* Create a hose so that we can report i/o base addresses to
- userland. */
-
- pci_isa_hose = hose = alloc_pci_controller();
- hose->io_space = &ioport_resource;
- hose->mem_space = &iomem_resource;
- hose->index = 0;
-
- hose->sparse_mem_base = EISA_MEM - IDENT_ADDR;
- hose->dense_mem_base = 0;
- hose->sparse_io_base = EISA_IO - IDENT_ADDR;
- hose->dense_io_base = 0;
-
- hose->sg_isa = hose->sg_pci = NULL;
- __direct_map_base = 0;
- __direct_map_size = 0xffffffff;
-}
-
-static void
-jensen_machine_check(unsigned long vector, unsigned long la)
-{
- printk(KERN_CRIT "Machine check\n");
-}
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector jensen_mv __initmv = {
- .vector_name = "Jensen",
- DO_EV4_MMU,
- IO_LITE(JENSEN,jensen),
- .machine_check = jensen_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .rtc_port = 0x170,
-
- .nr_irqs = 16,
- .device_interrupt = jensen_device_interrupt,
-
- .init_arch = jensen_init_arch,
- .init_irq = jensen_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = NULL,
- .kill_arch = NULL,
-};
-ALIAS_MV(jensen)
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index 7fc72aeb7398..a9a8e9ab0f52 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -30,39 +30,6 @@
#include "proto.h"
-/* Work-around for some SRMs which mishandle opDEC faults. */
-
-static int opDEC_fix;
-
-static void
-opDEC_check(void)
-{
- __asm__ __volatile__ (
- /* Load the address of... */
- " br $16, 1f\n"
- /* A stub instruction fault handler. Just add 4 to the
- pc and continue. */
- " ldq $16, 8($sp)\n"
- " addq $16, 4, $16\n"
- " stq $16, 8($sp)\n"
- " call_pal %[rti]\n"
- /* Install the instruction fault handler. */
- "1: lda $17, 3\n"
- " call_pal %[wrent]\n"
- /* With that in place, the fault from the round-to-minf fp
- insn will arrive either at the "lda 4" insn (bad) or one
- past that (good). This places the correct fixup in %0. */
- " lda %[fix], 0\n"
- " cvttq/svm $f31,$f31\n"
- " lda %[fix], 4"
- : [fix] "=r" (opDEC_fix)
- : [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
- : "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
-
- if (opDEC_fix)
- printk("opDEC fixup enabled.\n");
-}
-
void
dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
{
diff --git a/drivers/eisa/Kconfig b/drivers/eisa/Kconfig
index c8bbf90209f5..a66b3be502a9 100644
--- a/drivers/eisa/Kconfig
+++ b/drivers/eisa/Kconfig
@@ -44,17 +44,16 @@ config EISA_PCI_EISA
When in doubt, say Y.
-# Using EISA_VIRTUAL_ROOT on something other than an Alpha or
-# an X86 may lead to crashes...
+# Using EISA_VIRTUAL_ROOT on something other than an X86 may lead
+# to crashes...
config EISA_VIRTUAL_ROOT
bool "EISA virtual root device"
- depends on EISA && (ALPHA || X86)
+ depends on EISA && X86
default y
help
Activate this option if your system only have EISA bus
- (no PCI slots). The Alpha Jensen is an example of such
- a system.
+ (no PCI slots).
When in doubt, say Y.
diff --git a/drivers/eisa/virtual_root.c b/drivers/eisa/virtual_root.c
index 37e6dd219c37..cd9515d9d8f0 100644
--- a/drivers/eisa/virtual_root.c
+++ b/drivers/eisa/virtual_root.c
@@ -13,7 +13,7 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
-#if defined(CONFIG_ALPHA_JENSEN) || defined(CONFIG_EISA_VLB_PRIMING)
+#if defined(CONFIG_EISA_VLB_PRIMING)
#define EISA_FORCE_PROBE_DEFAULT 1
#else
#define EISA_FORCE_PROBE_DEFAULT 0
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index 64590b86eb37..a8f4b2d70e59 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -15,10 +15,7 @@
* IRQs.
*/
-#ifdef __alpha__
-# define I8042_KBD_IRQ 1
-# define I8042_AUX_IRQ (RTC_PORT(0) == 0x170 ? 9 : 12) /* Jensen is special */
-#elif defined(__arm__)
+#if defined(__arm__)
/* defined in include/asm-arm/arch-xxx/irqs.h */
#include <asm/irq.h>
#elif defined(CONFIG_PPC)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 1aa3e55c8b47..6a7b286f6f5a 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -293,9 +293,6 @@ static inline int serial8250_in_MCR(struct uart_8250_port *up)
return mctrl;
}
-bool alpha_jensen(void);
-void alpha_jensen_set_mctrl(struct uart_port *port, unsigned int mctrl);
-
#ifdef CONFIG_SERIAL_8250_PNP
int serial8250_pnp_init(void);
void serial8250_pnp_exit(void);
diff --git a/drivers/tty/serial/8250/8250_alpha.c b/drivers/tty/serial/8250/8250_alpha.c
deleted file mode 100644
index 58e70328aa4d..000000000000
--- a/drivers/tty/serial/8250/8250_alpha.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/machvec.h>
-#include "8250.h"
-
-bool alpha_jensen(void)
-{
- return !strcmp(alpha_mv.vector_name, "Jensen");
-}
-
-void alpha_jensen_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- /*
- * Digital did something really horribly wrong with the OUT1 and OUT2
- * lines on Alpha Jensen. The failure mode is that if either is
- * cleared, the machine locks up with endless interrupts.
- */
- mctrl |= TIOCM_OUT1 | TIOCM_OUT2;
-
- serial8250_do_set_mctrl(port, mctrl);
-}
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index b62ad9006780..2504e0455875 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -508,10 +508,6 @@ static struct uart_8250_port *serial8250_setup_port(int index)
up->ops = &univ8250_driver_ops;
- if (IS_ENABLED(CONFIG_ALPHA_JENSEN) ||
- (IS_ENABLED(CONFIG_ALPHA_GENERIC) && alpha_jensen()))
- up->port.set_mctrl = alpha_jensen_set_mctrl;
-
serial8250_set_defaults(up);
return up;
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index ea2e81f58eac..69ac00270547 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -5,8 +5,6 @@
obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o
8250-y := 8250_core.o
-8250-$(CONFIG_ALPHA_GENERIC) += 8250_alpha.o
-8250-$(CONFIG_ALPHA_JENSEN) += 8250_alpha.o
8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
8250_base-y := 8250_port.o
8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
--
2.39.2
From: Arnd Bergmann <[email protected]>
The sable family (Alphaserver 2000 and 2100) comes in variants for
EV4, EV45, EV5 and EV56. Drop support for the earlier ones that
lack support for the BWX extension but keep the later 'gamma'
variant around since that works with EV56 CPUs.
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/Kconfig | 29 +--
arch/alpha/include/asm/core_t2.h | 8 -
arch/alpha/include/asm/irq.h | 1 -
arch/alpha/kernel/Makefile | 1 -
arch/alpha/kernel/setup.c | 11 +-
arch/alpha/kernel/sys_sable.c | 294 +------------------------------
6 files changed, 11 insertions(+), 333 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 9b8d3ce40c28..951a9c712361 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -100,7 +100,6 @@ choice
EB66 EB66 21066 evaluation board
EB66+ EB66+ 21066 evaluation board
LX164 AlphaPC164-LX
- Lynx AS 2100A
Miata Personal Workstation 433/500/600 a/au
Marvel AlphaServer ES47 / ES80 / GS1280
Mikasa AS 1000
@@ -203,12 +202,6 @@ config ALPHA_LX164
A technical overview of this board is available at
<http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
-config ALPHA_LYNX
- bool "Lynx"
- select HAVE_EISA
- help
- AlphaServer 2100A-based systems.
-
config ALPHA_MARVEL
bool "Marvel"
help
@@ -325,9 +318,8 @@ config ALPHA_NONAME
config ALPHA_EV4
bool
- depends on (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
- default y if !ALPHA_LYNX
- default y if !ALPHA_EV5
+ depends on ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
+ default y
config ALPHA_LCA
bool
@@ -352,8 +344,8 @@ config ALPHA_EB64P
Runs from standard PC power supply.
config ALPHA_EV5
- bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
- default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+ bool
+ default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
config ALPHA_CIA
bool
@@ -378,16 +370,9 @@ config ALPHA_PRIMO
help
Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-config ALPHA_GAMMA
- bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_SABLE
- depends on ALPHA_SABLE || ALPHA_LYNX
- default ALPHA_LYNX
- help
- Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
-
config ALPHA_T2
bool
- depends on ALPHA_SABLE || ALPHA_LYNX
+ depends on ALPHA_SABLE
default y
config ALPHA_PYXIS
@@ -471,7 +456,7 @@ config ALPHA_QEMU
config ALPHA_SRM
bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
depends on TTY
- default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
+ default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
help
There are two different types of booting firmware on Alphas: SRM,
which is command line driven, and ARC, which uses menus and arrow
@@ -497,7 +482,7 @@ config ARCH_MAY_HAVE_PC_FDC
config SMP
bool "Symmetric multi-processing support"
- depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
+ depends on ALPHA_SABLE || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h
index ab956b1625b5..ca9b091d9c5f 100644
--- a/arch/alpha/include/asm/core_t2.h
+++ b/arch/alpha/include/asm/core_t2.h
@@ -25,16 +25,8 @@
#define T2_MEM_R1_MASK 0x07ffffff /* Mem sparse region 1 mask is 27 bits */
/* GAMMA-SABLE is a SABLE with EV5-based CPUs */
-/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
#define _GAMMA_BIAS 0x8000000000UL
-
-#if defined(CONFIG_ALPHA_GENERIC)
-#define GAMMA_BIAS alpha_mv.sys.t2.gamma_bias
-#elif defined(CONFIG_ALPHA_GAMMA)
#define GAMMA_BIAS _GAMMA_BIAS
-#else
-#define GAMMA_BIAS 0
-#endif
/*
* Memory spaces:
diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h
index 432402c8e47f..442097c56934 100644
--- a/arch/alpha/include/asm/irq.h
+++ b/arch/alpha/include/asm/irq.h
@@ -55,7 +55,6 @@
# define NR_IRQS 40
#elif defined(CONFIG_ALPHA_DP264) || \
- defined(CONFIG_ALPHA_LYNX) || \
defined(CONFIG_ALPHA_SHARK)
# define NR_IRQS 64
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 4b31060e1711..706ce8625e35 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -88,7 +88,6 @@ obj-$(CONFIG_ALPHA_RAWHIDE) += sys_rawhide.o irq_i8259.o
obj-$(CONFIG_ALPHA_RUFFIAN) += sys_ruffian.o irq_pyxis.o irq_i8259.o
obj-$(CONFIG_ALPHA_RX164) += sys_rx164.o irq_i8259.o
obj-$(CONFIG_ALPHA_SABLE) += sys_sable.o
-obj-$(CONFIG_ALPHA_LYNX) += sys_sable.o
obj-$(CONFIG_ALPHA_BOOK1) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
obj-$(CONFIG_ALPHA_AVANTI) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
obj-$(CONFIG_ALPHA_NONAME) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 6e6c842ef07c..3b833bd97817 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -182,7 +182,6 @@ WEAK(eb66_mv);
WEAK(eb66p_mv);
WEAK(eiger_mv);
WEAK(lx164_mv);
-WEAK(lynx_mv);
WEAK(marvel_ev7_mv);
WEAK(miata_mv);
WEAK(mikasa_mv);
@@ -198,7 +197,6 @@ WEAK(privateer_mv);
WEAK(rawhide_mv);
WEAK(ruffian_mv);
WEAK(rx164_mv);
-WEAK(sable_mv);
WEAK(sable_gamma_mv);
WEAK(shark_mv);
WEAK(sx164_mv);
@@ -751,7 +749,7 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
&alphabook1_mv,
&rawhide_mv,
NULL, /* K2 */
- &lynx_mv, /* Lynx */
+ NULL, /* Lynx */
&xl_mv,
NULL, /* EB164 -- see variation. */
NULL, /* Noritake -- see below. */
@@ -905,10 +903,7 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
vec = &noritake_mv;
break;
case ST_DEC_2100_A500:
- if (cpu == EV5_CPU || cpu == EV56_CPU)
- vec = &sable_gamma_mv;
- else
- vec = &sable_mv;
+ vec = &sable_gamma_mv;
break;
}
}
@@ -932,7 +927,6 @@ get_sysvec_byname(const char *name)
&eb66p_mv,
&eiger_mv,
&lx164_mv,
- &lynx_mv,
&miata_mv,
&mikasa_mv,
&mikasa_primo_mv,
@@ -947,7 +941,6 @@ get_sysvec_byname(const char *name)
&rawhide_mv,
&ruffian_mv,
&rx164_mv,
- &sable_mv,
&sable_gamma_mv,
&shark_mv,
&sx164_mv,
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 930005b2f630..49f5c75134ec 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -212,232 +212,6 @@ sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
}
#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-
-/***********************************************************************/
-/* LYNX hardware specifics
- */
-/*
- * For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
- *
- * Bit Meaning Kernel IRQ
- *------------------------------------------
- * 0
- * 1
- * 2
- * 3 mouse 12
- * 4
- * 5
- * 6 keyboard 1
- * 7 floppy 6
- * 8 COM2 3
- * 9 parallel port 7
- *10 EISA irq 3 -
- *11 EISA irq 4 -
- *12 EISA irq 5 5
- *13 EISA irq 6 -
- *14 EISA irq 7 -
- *15 COM1 4
- *16 EISA irq 9 9
- *17 EISA irq 10 10
- *18 EISA irq 11 11
- *19 EISA irq 12 -
- *20
- *21 EISA irq 14 14
- *22 EISA irq 15 15
- *23 IIC -
- *24 VGA (builtin) -
- *25
- *26
- *27
- *28 NCR810 (builtin) 28
- *29
- *30
- *31
- *32 PCI 0 slot 4 A primary bus 32
- *33 PCI 0 slot 4 B primary bus 33
- *34 PCI 0 slot 4 C primary bus 34
- *35 PCI 0 slot 4 D primary bus
- *36 PCI 0 slot 5 A primary bus
- *37 PCI 0 slot 5 B primary bus
- *38 PCI 0 slot 5 C primary bus
- *39 PCI 0 slot 5 D primary bus
- *40 PCI 0 slot 6 A primary bus
- *41 PCI 0 slot 6 B primary bus
- *42 PCI 0 slot 6 C primary bus
- *43 PCI 0 slot 6 D primary bus
- *44 PCI 0 slot 7 A primary bus
- *45 PCI 0 slot 7 B primary bus
- *46 PCI 0 slot 7 C primary bus
- *47 PCI 0 slot 7 D primary bus
- *48 PCI 0 slot 0 A secondary bus
- *49 PCI 0 slot 0 B secondary bus
- *50 PCI 0 slot 0 C secondary bus
- *51 PCI 0 slot 0 D secondary bus
- *52 PCI 0 slot 1 A secondary bus
- *53 PCI 0 slot 1 B secondary bus
- *54 PCI 0 slot 1 C secondary bus
- *55 PCI 0 slot 1 D secondary bus
- *56 PCI 0 slot 2 A secondary bus
- *57 PCI 0 slot 2 B secondary bus
- *58 PCI 0 slot 2 C secondary bus
- *59 PCI 0 slot 2 D secondary bus
- *60 PCI 0 slot 3 A secondary bus
- *61 PCI 0 slot 3 B secondary bus
- *62 PCI 0 slot 3 C secondary bus
- *63 PCI 0 slot 3 D secondary bus
- */
-
-static void
-lynx_update_irq_hw(unsigned long bit, unsigned long mask)
-{
- /*
- * Write the AIR register on the T3/T4 with the
- * address of the IC mask register (offset 0x40)
- */
- *(vulp)T2_AIR = 0x40;
- mb();
- *(vulp)T2_AIR; /* re-read to force write */
- mb();
- *(vulp)T2_DIR = mask;
- mb();
- mb();
-}
-
-static void
-lynx_ack_irq_hw(unsigned long bit)
-{
- *(vulp)T2_VAR = (u_long) bit;
- mb();
- mb();
-}
-
-static irq_swizzle_t lynx_irq_swizzle = {
- { /* irq_to_mask */
- -1, 6, -1, 8, 15, 12, 7, 9, /* pseudo PIC 0-7 */
- -1, 16, 17, 18, 3, -1, 21, 22, /* pseudo PIC 8-15 */
- -1, -1, -1, -1, -1, -1, -1, -1, /* pseudo */
- -1, -1, -1, -1, 28, -1, -1, -1, /* pseudo */
- 32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */
- 40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */
- 48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */
- 56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */
- },
- { /* mask_to_irq */
- -1, -1, -1, 12, -1, -1, 1, 6, /* mask 0-7 */
- 3, 7, -1, -1, 5, -1, -1, 4, /* mask 8-15 */
- 9, 10, 11, -1, -1, 14, 15, -1, /* mask 16-23 */
- -1, -1, -1, -1, 28, -1, -1, -1, /* mask 24-31 */
- 32, 33, 34, 35, 36, 37, 38, 39, /* mask 32-39 */
- 40, 41, 42, 43, 44, 45, 46, 47, /* mask 40-47 */
- 48, 49, 50, 51, 52, 53, 54, 55, /* mask 48-55 */
- 56, 57, 58, 59, 60, 61, 62, 63 /* mask 56-63 */
- },
- -1,
- lynx_update_irq_hw,
- lynx_ack_irq_hw
-};
-
-static void __init
-lynx_init_irq(void)
-{
- sable_lynx_irq_swizzle = &lynx_irq_swizzle;
- sable_lynx_init_irq(64);
-}
-
-/*
- * PCI Fixup configuration for ALPHA LYNX (2100A)
- *
- * The device to slot mapping looks like:
- *
- * Slot Device
- * 0 none
- * 1 none
- * 2 PCI-EISA bridge
- * 3 PCI-PCI bridge
- * 4 NCR 810 (Demi-Lynx only)
- * 5 none
- * 6 PCI on board slot 4
- * 7 PCI on board slot 5
- * 8 PCI on board slot 6
- * 9 PCI on board slot 7
- *
- * And behind the PPB we have:
- *
- * 11 PCI on board slot 0
- * 12 PCI on board slot 1
- * 13 PCI on board slot 2
- * 14 PCI on board slot 3
- */
-/*
- * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
- * with the values in the irq swizzling tables above.
- */
-
-static int
-lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static char irq_tab[19][5] = {
- /*INT INTA INTB INTC INTD */
- { -1, -1, -1, -1, -1}, /* IdSel 13, PCEB */
- { -1, -1, -1, -1, -1}, /* IdSel 14, PPB */
- { 28, 28, 28, 28, 28}, /* IdSel 15, NCR demi */
- { -1, -1, -1, -1, -1}, /* IdSel 16, none */
- { 32, 32, 33, 34, 35}, /* IdSel 17, slot 4 */
- { 36, 36, 37, 38, 39}, /* IdSel 18, slot 5 */
- { 40, 40, 41, 42, 43}, /* IdSel 19, slot 6 */
- { 44, 44, 45, 46, 47}, /* IdSel 20, slot 7 */
- { -1, -1, -1, -1, -1}, /* IdSel 22, none */
- /* The following are actually behind the PPB. */
- { -1, -1, -1, -1, -1}, /* IdSel 16 none */
- { 28, 28, 28, 28, 28}, /* IdSel 17 NCR lynx */
- { -1, -1, -1, -1, -1}, /* IdSel 18 none */
- { -1, -1, -1, -1, -1}, /* IdSel 19 none */
- { -1, -1, -1, -1, -1}, /* IdSel 20 none */
- { -1, -1, -1, -1, -1}, /* IdSel 21 none */
- { 48, 48, 49, 50, 51}, /* IdSel 22 slot 0 */
- { 52, 52, 53, 54, 55}, /* IdSel 23 slot 1 */
- { 56, 56, 57, 58, 59}, /* IdSel 24 slot 2 */
- { 60, 60, 61, 62, 63} /* IdSel 25 slot 3 */
- };
- const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
- return COMMON_TABLE_LOOKUP;
-}
-
-static u8
-lynx_swizzle(struct pci_dev *dev, u8 *pinp)
-{
- int slot, pin = *pinp;
-
- if (dev->bus->number == 0) {
- slot = PCI_SLOT(dev->devfn);
- }
- /* Check for the built-in bridge */
- else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
- slot = PCI_SLOT(dev->devfn) + 11;
- }
- else
- {
- /* Must be a card-based bridge. */
- do {
- if (PCI_SLOT(dev->bus->self->devfn) == 3) {
- slot = PCI_SLOT(dev->devfn) + 11;
- break;
- }
- pin = pci_swizzle_interrupt_pin(dev, pin);
-
- /* Move up the chain of bridges. */
- dev = dev->bus->self;
- /* Slot of the next bridge. */
- slot = PCI_SLOT(dev->devfn);
- } while (dev->bus->self);
- }
- *pinp = pin;
- return slot;
-}
-
-#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
-
/***********************************************************************/
/* GENERIC irq routines */
@@ -539,40 +313,7 @@ sable_lynx_init_pci(void)
* these games with GAMMA_BIAS.
*/
-#if defined(CONFIG_ALPHA_GENERIC) || \
- (defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
-#undef GAMMA_BIAS
-#define GAMMA_BIAS 0
-struct alpha_machine_vector sable_mv __initmv = {
- .vector_name = "Sable",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_T2_IO,
- .machine_check = t2_machine_check,
- .max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
- .min_io_address = EISA_DEFAULT_IO_BASE,
- .min_mem_address = T2_DEFAULT_MEM_BASE,
-
- .nr_irqs = 40,
- .device_interrupt = sable_lynx_srm_device_interrupt,
-
- .init_arch = t2_init_arch,
- .init_irq = sable_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = sable_lynx_init_pci,
- .kill_arch = t2_kill_arch,
- .pci_map_irq = sable_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .t2 = {
- .gamma_bias = 0
- } }
-};
-ALIAS_MV(sable)
-#endif /* GENERIC || (SABLE && !GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || \
- (defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
#undef GAMMA_BIAS
#define GAMMA_BIAS _GAMMA_BIAS
struct alpha_machine_vector sable_gamma_mv __initmv = {
@@ -601,35 +342,4 @@ struct alpha_machine_vector sable_gamma_mv __initmv = {
} }
};
ALIAS_MV(sable_gamma)
-#endif /* GENERIC || (SABLE && GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-#undef GAMMA_BIAS
-#define GAMMA_BIAS _GAMMA_BIAS
-struct alpha_machine_vector lynx_mv __initmv = {
- .vector_name = "Lynx",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_T2_IO,
- .machine_check = t2_machine_check,
- .max_isa_dma_address = ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
- .min_io_address = EISA_DEFAULT_IO_BASE,
- .min_mem_address = T2_DEFAULT_MEM_BASE,
-
- .nr_irqs = 64,
- .device_interrupt = sable_lynx_srm_device_interrupt,
-
- .init_arch = t2_init_arch,
- .init_irq = lynx_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = sable_lynx_init_pci,
- .kill_arch = t2_kill_arch,
- .pci_map_irq = lynx_map_irq,
- .pci_swizzle = lynx_swizzle,
-
- .sys = { .t2 = {
- .gamma_bias = _GAMMA_BIAS
- } }
-};
-ALIAS_MV(lynx)
-#endif /* GENERIC || LYNX */
+#endif /* GENERIC || SABLE */
--
2.39.2
From: Arnd Bergmann <[email protected]>
The sys_cabriolet.c file includes support for multiple evaluation
boards. pc164 and lx164 are for ev56 CPUs, while the eb164 is
now the last supported machine that only supports ev5 but not
ev56.
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/Kconfig | 15 ++-------------
arch/alpha/include/asm/irq.h | 3 +--
arch/alpha/kernel/Makefile | 2 --
arch/alpha/kernel/sys_cabriolet.c | 28 +---------------------------
4 files changed, 4 insertions(+), 44 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index ee209e895505..7987bb548652 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -91,7 +91,6 @@ choice
Alcor/Alpha-XLT AS 600, AS 500, XL-300, XL-366
DP264 DP264 / DS20 / ES40 / DS10 / DS10L
- EB164 EB164 21164 evaluation board
LX164 AlphaPC164-LX
Miata Personal Workstation 433/500/600 a/au
Marvel AlphaServer ES47 / ES80 / GS1280
@@ -134,16 +133,6 @@ config ALPHA_DP264
API Networks: 264DP, UP2000(+), CS20;
Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
-config ALPHA_EB164
- bool "EB164"
- help
- EB164 21164 evaluation board from DEC. Uses 21164 and ALCOR. Has
- ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
- shared with an ISA slot) and 2 32-bit PCI slots. Uses plus-in
- Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
- MOUSE (PS2 style), RTC/NVRAM. Boot ROM is Flash. PC-AT-sized
- motherboard. Requires power supply with 3.3V output.
-
config ALPHA_EIGER
bool "Eiger"
help
@@ -260,7 +249,7 @@ config ALPHA_EV5
config ALPHA_CIA
bool
- depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+ depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR
default y
config ALPHA_EV56
@@ -350,7 +339,7 @@ config ALPHA_QEMU
config ALPHA_SRM
- bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
+ bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
depends on TTY
default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
help
diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h
index e7d22357a5a6..d83b26b6660f 100644
--- a/arch/alpha/include/asm/irq.h
+++ b/arch/alpha/include/asm/irq.h
@@ -31,8 +31,7 @@
# define NR_IRQS (32768 + 16) /* marvel - 32 pids */
# endif
-#elif defined(CONFIG_ALPHA_EB164) || \
- defined(CONFIG_ALPHA_PC164) || \
+#elif defined(CONFIG_ALPHA_PC164) || \
defined(CONFIG_ALPHA_LX164)
# define NR_IRQS 35
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index bd5d62fa4a9a..b6c862dff1f6 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -60,8 +60,6 @@ obj-$(CONFIG_ALPHA_WILDFIRE) += core_wildfire.o
# Board support
obj-$(CONFIG_ALPHA_ALCOR) += sys_alcor.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_EB164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- pc873xx.o
obj-$(CONFIG_ALPHA_LX164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
smc37c93x.o
obj-$(CONFIG_ALPHA_PC164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index 06a950072f82..54e75d4fdbe3 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -6,8 +6,7 @@
* Copyright (C) 1996 Jay A Estabrook
* Copyright (C) 1998, 1999, 2000 Richard Henderson
*
- * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164,
- * PC164 and LX164.
+ * Code supporting the PC164 and LX164.
*/
#include <linux/kernel.h>
@@ -308,31 +307,6 @@ alphapc164_init_pci(void)
* The System Vector
*/
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
-struct alpha_machine_vector eb164_mv __initmv = {
- .vector_name = "EB164",
- DO_EV5_MMU,
- DO_DEFAULT_RTC,
- DO_CIA_IO,
- .machine_check = cia_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = CIA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 35,
- .device_interrupt = cabriolet_device_interrupt,
-
- .init_arch = cia_init_arch,
- .init_irq = cabriolet_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = cia_cab_init_pci,
- .kill_arch = cia_kill_arch,
- .pci_map_irq = cabriolet_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb164)
-#endif
-
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
struct alpha_machine_vector lx164_mv __initmv = {
.vector_name = "LX164",
--
2.39.2
From: Arnd Bergmann <[email protected]>
APECS is the DECchip 21071x chipset for the EV4 and EV45 generation, while
LCA is the integrated I/O support on the corresponding low-cost alpha
machines of that generation.
All of these CPUs lack the BWX extension for byte and word access, so
drop the chipset support and all associated machines.
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/Kconfig | 114 +-----
arch/alpha/include/asm/core_apecs.h | 534 ----------------------------
arch/alpha/include/asm/core_lca.h | 378 --------------------
arch/alpha/include/asm/dma.h | 9 +-
arch/alpha/include/asm/io.h | 6 +-
arch/alpha/include/asm/irq.h | 8 +-
arch/alpha/kernel/Makefile | 19 +-
arch/alpha/kernel/core_apecs.c | 420 ----------------------
arch/alpha/kernel/core_lca.c | 473 ------------------------
arch/alpha/kernel/irq_i8259.c | 4 -
arch/alpha/kernel/pci_impl.h | 4 +-
arch/alpha/kernel/proto.h | 13 -
arch/alpha/kernel/setup.c | 79 +---
arch/alpha/kernel/sys_cabriolet.c | 59 ---
arch/alpha/kernel/sys_eb64p.c | 238 -------------
arch/alpha/kernel/sys_mikasa.c | 57 ---
arch/alpha/kernel/sys_noritake.c | 60 ----
arch/alpha/kernel/sys_sio.c | 486 -------------------------
18 files changed, 21 insertions(+), 2940 deletions(-)
delete mode 100644 arch/alpha/include/asm/core_apecs.h
delete mode 100644 arch/alpha/include/asm/core_lca.h
delete mode 100644 arch/alpha/kernel/core_apecs.c
delete mode 100644 arch/alpha/kernel/core_lca.c
delete mode 100644 arch/alpha/kernel/sys_eb64p.c
delete mode 100644 arch/alpha/kernel/sys_sio.c
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 951a9c712361..ee209e895505 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -90,20 +90,12 @@ choice
<http://www.alphalinux.org/>. In summary:
Alcor/Alpha-XLT AS 600, AS 500, XL-300, XL-366
- Alpha-XL XL-233, XL-266
- AlphaBook1 Alpha laptop
- Avanti AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
- Cabriolet AlphaPC64, AlphaPCI64
DP264 DP264 / DS20 / ES40 / DS10 / DS10L
EB164 EB164 21164 evaluation board
- EB64+ EB64+ 21064 evaluation board
- EB66 EB66 21066 evaluation board
- EB66+ EB66+ 21066 evaluation board
LX164 AlphaPC164-LX
Miata Personal Workstation 433/500/600 a/au
Marvel AlphaServer ES47 / ES80 / GS1280
Mikasa AS 1000
- Noname AXPpci33, UDB (Multia)
Noritake AS 1000A, AS 600A, AS 800
PC164 AlphaPC164
Rawhide AS 1200, AS 4000, AS 4100
@@ -135,27 +127,6 @@ config ALPHA_ALCOR
all the work required to support an external Bcache and to maintain
memory coherence when a PCI device DMAs into (or out of) memory.
-config ALPHA_XL
- bool "Alpha-XL"
- help
- XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
- bool "AlphaBook1"
- help
- Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
- bool "Avanti"
-
-config ALPHA_CABRIOLET
- bool "Cabriolet"
- help
- Cabriolet AlphaPC64, AlphaPCI64 systems. Derived from EB64+ but now
- baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
- slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
- Bcache SIMMs. Requires power supply with 3.3V output.
-
config ALPHA_DP264
bool "DP264"
help
@@ -173,23 +144,6 @@ config ALPHA_EB164
MOUSE (PS2 style), RTC/NVRAM. Boot ROM is Flash. PC-AT-sized
motherboard. Requires power supply with 3.3V output.
-config ALPHA_EB64P_CH
- bool "EB64+"
-
-config ALPHA_EB66
- bool "EB66"
- help
- A Digital DS group board. Uses 21066 or 21066A. I/O sub-system is
- identical to EB64+. Baby PC-AT size. Runs from standard PC power
- supply. The EB66 schematic was published as a marketing poster
- advertising the 21066 as "the first microprocessor in the world with
- embedded PCI".
-
-config ALPHA_EB66P
- bool "EB66+"
- help
- Later variant of the EB66 board.
-
config ALPHA_EIGER
bool "Eiger"
help
@@ -224,9 +178,6 @@ config ALPHA_NAUTILUS
help
Alpha systems based on the AMD 751 & ALI 1543C chipsets.
-config ALPHA_NONAME_CH
- bool "Noname"
-
config ALPHA_NORITAKE
bool "Noritake"
select HAVE_EISA
@@ -237,9 +188,6 @@ config ALPHA_NORITAKE
config ALPHA_PC164
bool "PC164"
-config ALPHA_P2K
- bool "Platform2000"
-
config ALPHA_RAWHIDE
bool "Rawhide"
select HAVE_EISA
@@ -303,53 +251,16 @@ config ISA_DMA_API
bool
default y
-config ALPHA_NONAME
- bool
- depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
- default y
- help
- The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
- UDB). This design was produced by Digital's Technical OEM (TOEM)
- group. It uses the 21066 processor running at 166MHz or 233MHz. It
- is a baby-AT size, and runs from a standard PC power supply. It has
- 5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
- 2 versions, with either PS/2 or large DIN connectors for the
- keyboard.
-
config ALPHA_EV4
bool
- depends on ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
- default y
-
-config ALPHA_LCA
- bool
- depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
- default y
-
-config ALPHA_APECS
- bool
- depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
- default y
-
-config ALPHA_EB64P
- bool
- depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
- default y
- help
- Uses 21064 or 21064A and APECs. Has ISA and PCI expansion (3 ISA,
- 2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
- ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
- (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
- SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM. PC-AT size.
- Runs from standard PC power supply.
config ALPHA_EV5
bool
- default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+ default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
config ALPHA_CIA
bool
- depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+ depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
default y
config ALPHA_EV56
@@ -358,18 +269,12 @@ config ALPHA_EV56
config ALPHA_EV56
prompt "EV56 CPU (speed >= 333MHz)?"
- depends on ALPHA_NORITAKE || ALPHA_PRIMO
+ depends on ALPHA_NORITAKE || ALPHA_MIKASA
config ALPHA_EV56
prompt "EV56 CPU (speed >= 400MHz)?"
depends on ALPHA_RAWHIDE
-config ALPHA_PRIMO
- bool "EV5 CPU daughtercard (model 5/xxx)?"
- depends on ALPHA_NORITAKE || ALPHA_MIKASA
- help
- Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
config ALPHA_T2
bool
depends on ALPHA_SABLE
@@ -416,15 +321,6 @@ config GENERIC_HWEIGHT
bool
default y if !ALPHA_EV67
-config ALPHA_AVANTI
- bool
- depends on ALPHA_XL || ALPHA_AVANTI_CH
- default y
- help
- Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
- Alphas. Info at
- <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
config ALPHA_BROKEN_IRQ_MASK
bool
depends on ALPHA_GENERIC || ALPHA_PC164
@@ -454,7 +350,7 @@ config ALPHA_QEMU
config ALPHA_SRM
- bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+ bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
depends on TTY
default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
help
@@ -518,7 +414,7 @@ config ARCH_SPARSEMEM_ENABLE
config ALPHA_WTINT
bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
default y if ALPHA_QEMU
- default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+ default n if ALPHA_EV5 || ALPHA_EV56
default n if !ALPHA_SRM && !ALPHA_GENERIC
default y if SMP
help
diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
deleted file mode 100644
index 69a2fc62c9c3..000000000000
--- a/arch/alpha/include/asm/core_apecs.h
+++ /dev/null
@@ -1,534 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_APECS__H__
-#define __ALPHA_APECS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * APECS is the internal name for the 2107x chipset which provides
- * memory controller and PCI access for the 21064 chip based systems.
- *
- * This file is based on:
- *
- * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
- * Data Sheet
- *
- * EC-N0648-72
- *
- *
- * [email protected] Initial Version.
- *
- */
-
-/*
- An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
- that get passed through the PCI<->ISA bridge chip. So we've gotta use
- both windows to max out the physical memory we can DMA to. Sigh...
-
- If we try a window at 0 for 1GB as a work-around, we run into conflicts
- with ISA/PCI bus memory which can't be relocated, like VGA aperture and
- BIOS ROMs. So we must put the windows high enough to avoid these areas.
-
- We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
- and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
- Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
- be used for that range (via virt_to_bus()).
-
- Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
- to keep virt_to_bus() from returning an address in the first window, for
- a data area that goes beyond the 64Mb first DMA window. Sigh...
- The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
- we can't just use that here, because of header file looping... :-(
-
- Window 1 will be used for all DMA from the ISA bus; yes, that does
- limit what memory an ISA floppy or sound card or Ethernet can touch, but
- it's also a known limitation on other platforms as well. We use the
- same technique that is used on INTEL platforms with similar limitation:
- set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
- We trust that any ISA bus device drivers will *always* ask for DMAable
- memory explicitly via kmalloc()/get_free_pages() flags arguments.
-
- Note that most PCI bus devices' drivers do *not* explicitly ask for
- DMAable memory; they count on being able to DMA to any memory they
- get from kmalloc()/get_free_pages(). They will also use window 1 for
- any physical memory accesses below 64Mb; the rest will be handled by
- window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
-
- We hope that the area before the first window is large enough so that
- there will be no overlap at the top end (64Mb). We *must* locate the
- PCI cards' memory just below window 1, so that there's still the
- possibility of being able to access it via SPARSE space. This is
- important for cards such as the Matrox Millennium, whose Xserver
- wants to access memory-mapped registers in byte and short lengths.
-
- Note that the XL is treated differently from the AVANTI, even though
- for most other things they are identical. It didn't seem reasonable to
- make the AVANTI support pay for the limitations of the XL. It is true,
- however, that an XL kernel will run on an AVANTI without problems.
-
- %%% All of this should be obviated by the ability to route
- everything through the iommu.
-*/
-
-/*
- * 21071-DA Control and Status registers.
- * These are used for PCI memory access.
- */
-#define APECS_IOC_DCSR (IDENT_ADDR + 0x1A0000000UL)
-#define APECS_IOC_PEAR (IDENT_ADDR + 0x1A0000020UL)
-#define APECS_IOC_SEAR (IDENT_ADDR + 0x1A0000040UL)
-#define APECS_IOC_DR1 (IDENT_ADDR + 0x1A0000060UL)
-#define APECS_IOC_DR2 (IDENT_ADDR + 0x1A0000080UL)
-#define APECS_IOC_DR3 (IDENT_ADDR + 0x1A00000A0UL)
-
-#define APECS_IOC_TB1R (IDENT_ADDR + 0x1A00000C0UL)
-#define APECS_IOC_TB2R (IDENT_ADDR + 0x1A00000E0UL)
-
-#define APECS_IOC_PB1R (IDENT_ADDR + 0x1A0000100UL)
-#define APECS_IOC_PB2R (IDENT_ADDR + 0x1A0000120UL)
-
-#define APECS_IOC_PM1R (IDENT_ADDR + 0x1A0000140UL)
-#define APECS_IOC_PM2R (IDENT_ADDR + 0x1A0000160UL)
-
-#define APECS_IOC_HAXR0 (IDENT_ADDR + 0x1A0000180UL)
-#define APECS_IOC_HAXR1 (IDENT_ADDR + 0x1A00001A0UL)
-#define APECS_IOC_HAXR2 (IDENT_ADDR + 0x1A00001C0UL)
-
-#define APECS_IOC_PMLT (IDENT_ADDR + 0x1A00001E0UL)
-
-#define APECS_IOC_TLBTAG0 (IDENT_ADDR + 0x1A0000200UL)
-#define APECS_IOC_TLBTAG1 (IDENT_ADDR + 0x1A0000220UL)
-#define APECS_IOC_TLBTAG2 (IDENT_ADDR + 0x1A0000240UL)
-#define APECS_IOC_TLBTAG3 (IDENT_ADDR + 0x1A0000260UL)
-#define APECS_IOC_TLBTAG4 (IDENT_ADDR + 0x1A0000280UL)
-#define APECS_IOC_TLBTAG5 (IDENT_ADDR + 0x1A00002A0UL)
-#define APECS_IOC_TLBTAG6 (IDENT_ADDR + 0x1A00002C0UL)
-#define APECS_IOC_TLBTAG7 (IDENT_ADDR + 0x1A00002E0UL)
-
-#define APECS_IOC_TLBDATA0 (IDENT_ADDR + 0x1A0000300UL)
-#define APECS_IOC_TLBDATA1 (IDENT_ADDR + 0x1A0000320UL)
-#define APECS_IOC_TLBDATA2 (IDENT_ADDR + 0x1A0000340UL)
-#define APECS_IOC_TLBDATA3 (IDENT_ADDR + 0x1A0000360UL)
-#define APECS_IOC_TLBDATA4 (IDENT_ADDR + 0x1A0000380UL)
-#define APECS_IOC_TLBDATA5 (IDENT_ADDR + 0x1A00003A0UL)
-#define APECS_IOC_TLBDATA6 (IDENT_ADDR + 0x1A00003C0UL)
-#define APECS_IOC_TLBDATA7 (IDENT_ADDR + 0x1A00003E0UL)
-
-#define APECS_IOC_TBIA (IDENT_ADDR + 0x1A0000400UL)
-
-
-/*
- * 21071-CA Control and Status registers.
- * These are used to program memory timing,
- * configure memory and initialise the B-Cache.
- */
-#define APECS_MEM_GCR (IDENT_ADDR + 0x180000000UL)
-#define APECS_MEM_EDSR (IDENT_ADDR + 0x180000040UL)
-#define APECS_MEM_TAR (IDENT_ADDR + 0x180000060UL)
-#define APECS_MEM_ELAR (IDENT_ADDR + 0x180000080UL)
-#define APECS_MEM_EHAR (IDENT_ADDR + 0x1800000a0UL)
-#define APECS_MEM_SFT_RST (IDENT_ADDR + 0x1800000c0UL)
-#define APECS_MEM_LDxLAR (IDENT_ADDR + 0x1800000e0UL)
-#define APECS_MEM_LDxHAR (IDENT_ADDR + 0x180000100UL)
-#define APECS_MEM_GTR (IDENT_ADDR + 0x180000200UL)
-#define APECS_MEM_RTR (IDENT_ADDR + 0x180000220UL)
-#define APECS_MEM_VFPR (IDENT_ADDR + 0x180000240UL)
-#define APECS_MEM_PDLDR (IDENT_ADDR + 0x180000260UL)
-#define APECS_MEM_PDhDR (IDENT_ADDR + 0x180000280UL)
-
-/* Bank x Base Address Register */
-#define APECS_MEM_B0BAR (IDENT_ADDR + 0x180000800UL)
-#define APECS_MEM_B1BAR (IDENT_ADDR + 0x180000820UL)
-#define APECS_MEM_B2BAR (IDENT_ADDR + 0x180000840UL)
-#define APECS_MEM_B3BAR (IDENT_ADDR + 0x180000860UL)
-#define APECS_MEM_B4BAR (IDENT_ADDR + 0x180000880UL)
-#define APECS_MEM_B5BAR (IDENT_ADDR + 0x1800008A0UL)
-#define APECS_MEM_B6BAR (IDENT_ADDR + 0x1800008C0UL)
-#define APECS_MEM_B7BAR (IDENT_ADDR + 0x1800008E0UL)
-#define APECS_MEM_B8BAR (IDENT_ADDR + 0x180000900UL)
-
-/* Bank x Configuration Register */
-#define APECS_MEM_B0BCR (IDENT_ADDR + 0x180000A00UL)
-#define APECS_MEM_B1BCR (IDENT_ADDR + 0x180000A20UL)
-#define APECS_MEM_B2BCR (IDENT_ADDR + 0x180000A40UL)
-#define APECS_MEM_B3BCR (IDENT_ADDR + 0x180000A60UL)
-#define APECS_MEM_B4BCR (IDENT_ADDR + 0x180000A80UL)
-#define APECS_MEM_B5BCR (IDENT_ADDR + 0x180000AA0UL)
-#define APECS_MEM_B6BCR (IDENT_ADDR + 0x180000AC0UL)
-#define APECS_MEM_B7BCR (IDENT_ADDR + 0x180000AE0UL)
-#define APECS_MEM_B8BCR (IDENT_ADDR + 0x180000B00UL)
-
-/* Bank x Timing Register A */
-#define APECS_MEM_B0TRA (IDENT_ADDR + 0x180000C00UL)
-#define APECS_MEM_B1TRA (IDENT_ADDR + 0x180000C20UL)
-#define APECS_MEM_B2TRA (IDENT_ADDR + 0x180000C40UL)
-#define APECS_MEM_B3TRA (IDENT_ADDR + 0x180000C60UL)
-#define APECS_MEM_B4TRA (IDENT_ADDR + 0x180000C80UL)
-#define APECS_MEM_B5TRA (IDENT_ADDR + 0x180000CA0UL)
-#define APECS_MEM_B6TRA (IDENT_ADDR + 0x180000CC0UL)
-#define APECS_MEM_B7TRA (IDENT_ADDR + 0x180000CE0UL)
-#define APECS_MEM_B8TRA (IDENT_ADDR + 0x180000D00UL)
-
-/* Bank x Timing Register B */
-#define APECS_MEM_B0TRB (IDENT_ADDR + 0x180000E00UL)
-#define APECS_MEM_B1TRB (IDENT_ADDR + 0x180000E20UL)
-#define APECS_MEM_B2TRB (IDENT_ADDR + 0x180000E40UL)
-#define APECS_MEM_B3TRB (IDENT_ADDR + 0x180000E60UL)
-#define APECS_MEM_B4TRB (IDENT_ADDR + 0x180000E80UL)
-#define APECS_MEM_B5TRB (IDENT_ADDR + 0x180000EA0UL)
-#define APECS_MEM_B6TRB (IDENT_ADDR + 0x180000EC0UL)
-#define APECS_MEM_B7TRB (IDENT_ADDR + 0x180000EE0UL)
-#define APECS_MEM_B8TRB (IDENT_ADDR + 0x180000F00UL)
-
-
-/*
- * Memory spaces:
- */
-#define APECS_IACK_SC (IDENT_ADDR + 0x1b0000000UL)
-#define APECS_CONF (IDENT_ADDR + 0x1e0000000UL)
-#define APECS_IO (IDENT_ADDR + 0x1c0000000UL)
-#define APECS_SPARSE_MEM (IDENT_ADDR + 0x200000000UL)
-#define APECS_DENSE_MEM (IDENT_ADDR + 0x300000000UL)
-
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define APECS_IOC_STAT0_CMD 0xf
-#define APECS_IOC_STAT0_ERR (1<<4)
-#define APECS_IOC_STAT0_LOST (1<<5)
-#define APECS_IOC_STAT0_THIT (1<<6)
-#define APECS_IOC_STAT0_TREF (1<<7)
-#define APECS_IOC_STAT0_CODE_SHIFT 8
-#define APECS_IOC_STAT0_CODE_MASK 0x7
-#define APECS_IOC_STAT0_P_NBR_SHIFT 13
-#define APECS_IOC_STAT0_P_NBR_MASK 0x7ffff
-
-#define APECS_HAE_ADDRESS APECS_IOC_HAXR1
-
-
-/*
- * Data structure for handling APECS machine checks:
- */
-
-struct el_apecs_mikasa_sysdata_mcheck
-{
- unsigned long coma_gcr;
- unsigned long coma_edsr;
- unsigned long coma_ter;
- unsigned long coma_elar;
- unsigned long coma_ehar;
- unsigned long coma_ldlr;
- unsigned long coma_ldhr;
- unsigned long coma_base0;
- unsigned long coma_base1;
- unsigned long coma_base2;
- unsigned long coma_base3;
- unsigned long coma_cnfg0;
- unsigned long coma_cnfg1;
- unsigned long coma_cnfg2;
- unsigned long coma_cnfg3;
- unsigned long epic_dcsr;
- unsigned long epic_pear;
- unsigned long epic_sear;
- unsigned long epic_tbr1;
- unsigned long epic_tbr2;
- unsigned long epic_pbr1;
- unsigned long epic_pbr2;
- unsigned long epic_pmr1;
- unsigned long epic_pmr2;
- unsigned long epic_harx1;
- unsigned long epic_harx2;
- unsigned long epic_pmlt;
- unsigned long epic_tag0;
- unsigned long epic_tag1;
- unsigned long epic_tag2;
- unsigned long epic_tag3;
- unsigned long epic_tag4;
- unsigned long epic_tag5;
- unsigned long epic_tag6;
- unsigned long epic_tag7;
- unsigned long epic_data0;
- unsigned long epic_data1;
- unsigned long epic_data2;
- unsigned long epic_data3;
- unsigned long epic_data4;
- unsigned long epic_data5;
- unsigned long epic_data6;
- unsigned long epic_data7;
-
- unsigned long pceb_vid;
- unsigned long pceb_did;
- unsigned long pceb_revision;
- unsigned long pceb_command;
- unsigned long pceb_status;
- unsigned long pceb_latency;
- unsigned long pceb_control;
- unsigned long pceb_arbcon;
- unsigned long pceb_arbpri;
-
- unsigned long esc_id;
- unsigned long esc_revision;
- unsigned long esc_int0;
- unsigned long esc_int1;
- unsigned long esc_elcr0;
- unsigned long esc_elcr1;
- unsigned long esc_last_eisa;
- unsigned long esc_nmi_stat;
-
- unsigned long pci_ir;
- unsigned long pci_imr;
- unsigned long svr_mgr;
-};
-
-/* This for the normal APECS machines. */
-struct el_apecs_sysdata_mcheck
-{
- unsigned long coma_gcr;
- unsigned long coma_edsr;
- unsigned long coma_ter;
- unsigned long coma_elar;
- unsigned long coma_ehar;
- unsigned long coma_ldlr;
- unsigned long coma_ldhr;
- unsigned long coma_base0;
- unsigned long coma_base1;
- unsigned long coma_base2;
- unsigned long coma_cnfg0;
- unsigned long coma_cnfg1;
- unsigned long coma_cnfg2;
- unsigned long epic_dcsr;
- unsigned long epic_pear;
- unsigned long epic_sear;
- unsigned long epic_tbr1;
- unsigned long epic_tbr2;
- unsigned long epic_pbr1;
- unsigned long epic_pbr2;
- unsigned long epic_pmr1;
- unsigned long epic_pmr2;
- unsigned long epic_harx1;
- unsigned long epic_harx2;
- unsigned long epic_pmlt;
- unsigned long epic_tag0;
- unsigned long epic_tag1;
- unsigned long epic_tag2;
- unsigned long epic_tag3;
- unsigned long epic_tag4;
- unsigned long epic_tag5;
- unsigned long epic_tag6;
- unsigned long epic_tag7;
- unsigned long epic_data0;
- unsigned long epic_data1;
- unsigned long epic_data2;
- unsigned long epic_data3;
- unsigned long epic_data4;
- unsigned long epic_data5;
- unsigned long epic_data6;
- unsigned long epic_data7;
-};
-
-struct el_apecs_procdata
-{
- unsigned long paltemp[32]; /* PAL TEMP REGS. */
- /* EV4-specific fields */
- unsigned long exc_addr; /* Address of excepting instruction. */
- unsigned long exc_sum; /* Summary of arithmetic traps. */
- unsigned long exc_mask; /* Exception mask (from exc_sum). */
- unsigned long iccsr; /* IBox hardware enables. */
- unsigned long pal_base; /* Base address for PALcode. */
- unsigned long hier; /* Hardware Interrupt Enable. */
- unsigned long hirr; /* Hardware Interrupt Request. */
- unsigned long csr; /* D-stream fault info. */
- unsigned long dc_stat; /* D-cache status (ECC/Parity Err). */
- unsigned long dc_addr; /* EV3 Phys Addr for ECC/DPERR. */
- unsigned long abox_ctl; /* ABox Control Register. */
- unsigned long biu_stat; /* BIU Status. */
- unsigned long biu_addr; /* BUI Address. */
- unsigned long biu_ctl; /* BIU Control. */
- unsigned long fill_syndrome;/* For correcting ECC errors. */
- unsigned long fill_addr; /* Cache block which was being read */
- unsigned long va; /* Effective VA of fault or miss. */
- unsigned long bc_tag; /* Backup Cache Tag Probe Results.*/
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the APECS machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here. In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip volatile int __force *
-#define vuip volatile unsigned int __force *
-#define vulp volatile unsigned long __force *
-
-#define APECS_SET_HAE \
- do { \
- if (addr >= (1UL << 24)) { \
- unsigned long msb = addr & 0xf8000000; \
- addr -= msb; \
- set_hae(msb); \
- } \
- } while (0)
-
-__EXTERN_INLINE u8 apecs_ioread8(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x00;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x00;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x00;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x00;
- }
-
- w = __kernel_insbl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u16 apecs_ioread16(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x08;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x08;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= APECS_DENSE_MEM) {
- addr -= APECS_DENSE_MEM;
- APECS_SET_HAE;
- base_and_type = APECS_SPARSE_MEM + 0x08;
- } else {
- addr -= APECS_IO;
- base_and_type = APECS_IO + 0x08;
- }
-
- w = __kernel_inswl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u32 apecs_ioread32(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- return *(vuip)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- *(vuip)addr = b;
-}
-
-__EXTERN_INLINE u64 apecs_ioread64(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- return *(vulp)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite64(u64 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < APECS_DENSE_MEM)
- addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
- *(vulp)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
-{
- return (void __iomem *)(addr + APECS_IO);
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
- unsigned long size)
-{
- return (void __iomem *)(addr + APECS_DENSE_MEM);
-}
-
-__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
-{
- return addr >= IDENT_ADDR + 0x180000000UL;
-}
-
-__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
-{
- return (unsigned long)addr >= APECS_DENSE_MEM;
-}
-
-#undef APECS_SET_HAE
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX apecs
-#define apecs_trivial_io_bw 0
-#define apecs_trivial_io_lq 0
-#define apecs_trivial_rw_bw 2
-#define apecs_trivial_rw_lq 1
-#define apecs_trivial_iounmap 1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_APECS__H__ */
diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h
deleted file mode 100644
index d8c3e72ef8f6..000000000000
--- a/arch/alpha/include/asm/core_lca.h
+++ /dev/null
@@ -1,378 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_LCA__H__
-#define __ALPHA_LCA__H__
-
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
- * for example).
- *
- * This file is based on:
- *
- * DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
- * Hardware Reference Manual; Digital Equipment Corp.; May 1994;
- * Maynard, MA; Order Number: EC-N2681-71.
- */
-
-/*
- * NOTE: The LCA uses a Host Address Extension (HAE) register to access
- * PCI addresses that are beyond the first 27 bits of address
- * space. Updating the HAE requires an external cycle (and
- * a memory barrier), which tends to be slow. Instead of updating
- * it on each sparse memory access, we keep the current HAE value
- * cached in variable cache_hae. Only if the cached HAE differs
- * from the desired HAE value do we actually updated HAE register.
- * The HAE register is preserved by the interrupt handler entry/exit
- * code, so this scheme works even in the presence of interrupts.
- *
- * Dense memory space doesn't require the HAE, but is restricted to
- * aligned 32 and 64 bit accesses. Special Cycle and Interrupt
- * Acknowledge cycles may also require the use of the HAE. The LCA
- * limits I/O address space to the bottom 24 bits of address space,
- * but this easily covers the 16 bit ISA I/O address space.
- */
-
-/*
- * NOTE 2! The memory operations do not set any memory barriers, as
- * it's not needed for cases like a frame buffer that is essentially
- * memory-like. You need to do them by hand if the operations depend
- * on ordering.
- *
- * Similarly, the port I/O operations do a "mb" only after a write
- * operation: if an mb is needed before (as in the case of doing
- * memory mapped I/O first, and then a port I/O operation to the same
- * device), it needs to be done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do
- * the mb all the time, but right now I'm hoping this will work out.
- * Avoiding mb's may potentially be a noticeable speed improvement,
- * but I can't honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to
- * non-interrupts is another fun race area. Don't do it (because if
- * you do, I'll have to do *everything* with interrupts disabled,
- * ugh).
- */
-
-/*
- * Memory Controller registers:
- */
-#define LCA_MEM_BCR0 (IDENT_ADDR + 0x120000000UL)
-#define LCA_MEM_BCR1 (IDENT_ADDR + 0x120000008UL)
-#define LCA_MEM_BCR2 (IDENT_ADDR + 0x120000010UL)
-#define LCA_MEM_BCR3 (IDENT_ADDR + 0x120000018UL)
-#define LCA_MEM_BMR0 (IDENT_ADDR + 0x120000020UL)
-#define LCA_MEM_BMR1 (IDENT_ADDR + 0x120000028UL)
-#define LCA_MEM_BMR2 (IDENT_ADDR + 0x120000030UL)
-#define LCA_MEM_BMR3 (IDENT_ADDR + 0x120000038UL)
-#define LCA_MEM_BTR0 (IDENT_ADDR + 0x120000040UL)
-#define LCA_MEM_BTR1 (IDENT_ADDR + 0x120000048UL)
-#define LCA_MEM_BTR2 (IDENT_ADDR + 0x120000050UL)
-#define LCA_MEM_BTR3 (IDENT_ADDR + 0x120000058UL)
-#define LCA_MEM_GTR (IDENT_ADDR + 0x120000060UL)
-#define LCA_MEM_ESR (IDENT_ADDR + 0x120000068UL)
-#define LCA_MEM_EAR (IDENT_ADDR + 0x120000070UL)
-#define LCA_MEM_CAR (IDENT_ADDR + 0x120000078UL)
-#define LCA_MEM_VGR (IDENT_ADDR + 0x120000080UL)
-#define LCA_MEM_PLM (IDENT_ADDR + 0x120000088UL)
-#define LCA_MEM_FOR (IDENT_ADDR + 0x120000090UL)
-
-/*
- * I/O Controller registers:
- */
-#define LCA_IOC_HAE (IDENT_ADDR + 0x180000000UL)
-#define LCA_IOC_CONF (IDENT_ADDR + 0x180000020UL)
-#define LCA_IOC_STAT0 (IDENT_ADDR + 0x180000040UL)
-#define LCA_IOC_STAT1 (IDENT_ADDR + 0x180000060UL)
-#define LCA_IOC_TBIA (IDENT_ADDR + 0x180000080UL)
-#define LCA_IOC_TB_ENA (IDENT_ADDR + 0x1800000a0UL)
-#define LCA_IOC_SFT_RST (IDENT_ADDR + 0x1800000c0UL)
-#define LCA_IOC_PAR_DIS (IDENT_ADDR + 0x1800000e0UL)
-#define LCA_IOC_W_BASE0 (IDENT_ADDR + 0x180000100UL)
-#define LCA_IOC_W_BASE1 (IDENT_ADDR + 0x180000120UL)
-#define LCA_IOC_W_MASK0 (IDENT_ADDR + 0x180000140UL)
-#define LCA_IOC_W_MASK1 (IDENT_ADDR + 0x180000160UL)
-#define LCA_IOC_T_BASE0 (IDENT_ADDR + 0x180000180UL)
-#define LCA_IOC_T_BASE1 (IDENT_ADDR + 0x1800001a0UL)
-#define LCA_IOC_TB_TAG0 (IDENT_ADDR + 0x188000000UL)
-#define LCA_IOC_TB_TAG1 (IDENT_ADDR + 0x188000020UL)
-#define LCA_IOC_TB_TAG2 (IDENT_ADDR + 0x188000040UL)
-#define LCA_IOC_TB_TAG3 (IDENT_ADDR + 0x188000060UL)
-#define LCA_IOC_TB_TAG4 (IDENT_ADDR + 0x188000070UL)
-#define LCA_IOC_TB_TAG5 (IDENT_ADDR + 0x1880000a0UL)
-#define LCA_IOC_TB_TAG6 (IDENT_ADDR + 0x1880000c0UL)
-#define LCA_IOC_TB_TAG7 (IDENT_ADDR + 0x1880000e0UL)
-
-/*
- * Memory spaces:
- */
-#define LCA_IACK_SC (IDENT_ADDR + 0x1a0000000UL)
-#define LCA_CONF (IDENT_ADDR + 0x1e0000000UL)
-#define LCA_IO (IDENT_ADDR + 0x1c0000000UL)
-#define LCA_SPARSE_MEM (IDENT_ADDR + 0x200000000UL)
-#define LCA_DENSE_MEM (IDENT_ADDR + 0x300000000UL)
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define LCA_IOC_STAT0_CMD 0xf
-#define LCA_IOC_STAT0_ERR (1<<4)
-#define LCA_IOC_STAT0_LOST (1<<5)
-#define LCA_IOC_STAT0_THIT (1<<6)
-#define LCA_IOC_STAT0_TREF (1<<7)
-#define LCA_IOC_STAT0_CODE_SHIFT 8
-#define LCA_IOC_STAT0_CODE_MASK 0x7
-#define LCA_IOC_STAT0_P_NBR_SHIFT 13
-#define LCA_IOC_STAT0_P_NBR_MASK 0x7ffff
-
-#define LCA_HAE_ADDRESS LCA_IOC_HAE
-
-/* LCA PMR Power Management register defines */
-#define LCA_PMR_ADDR (IDENT_ADDR + 0x120000098UL)
-#define LCA_PMR_PDIV 0x7 /* Primary clock divisor */
-#define LCA_PMR_ODIV 0x38 /* Override clock divisor */
-#define LCA_PMR_INTO 0x40 /* Interrupt override */
-#define LCA_PMR_DMAO 0x80 /* DMA override */
-#define LCA_PMR_OCCEB 0xffff0000L /* Override cycle counter - even bits */
-#define LCA_PMR_OCCOB 0xffff000000000000L /* Override cycle counter - even bits */
-#define LCA_PMR_PRIMARY_MASK 0xfffffffffffffff8L
-
-/* LCA PMR Macros */
-
-#define LCA_READ_PMR (*(volatile unsigned long *)LCA_PMR_ADDR)
-#define LCA_WRITE_PMR(d) (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
-
-#define LCA_GET_PRIMARY(r) ((r) & LCA_PMR_PDIV)
-#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
-#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
-
-/* LCA PMR Divisor values */
-#define LCA_PMR_DIV_1 0x0
-#define LCA_PMR_DIV_1_5 0x1
-#define LCA_PMR_DIV_2 0x2
-#define LCA_PMR_DIV_4 0x3
-#define LCA_PMR_DIV_8 0x4
-#define LCA_PMR_DIV_16 0x5
-#define LCA_PMR_DIV_MIN DIV_1
-#define LCA_PMR_DIV_MAX DIV_16
-
-
-/*
- * Data structure for handling LCA machine checks. Correctable errors
- * result in a short logout frame, uncorrectable ones in a long one.
- */
-struct el_lca_mcheck_short {
- struct el_common h; /* common logout header */
- unsigned long esr; /* error-status register */
- unsigned long ear; /* error-address register */
- unsigned long dc_stat; /* dcache status register */
- unsigned long ioc_stat0; /* I/O controller status register 0 */
- unsigned long ioc_stat1; /* I/O controller status register 1 */
-};
-
-struct el_lca_mcheck_long {
- struct el_common h; /* common logout header */
- unsigned long pt[31]; /* PAL temps */
- unsigned long exc_addr; /* exception address */
- unsigned long pad1[3];
- unsigned long pal_base; /* PALcode base address */
- unsigned long hier; /* hw interrupt enable */
- unsigned long hirr; /* hw interrupt request */
- unsigned long mm_csr; /* MMU control & status */
- unsigned long dc_stat; /* data cache status */
- unsigned long dc_addr; /* data cache addr register */
- unsigned long abox_ctl; /* address box control register */
- unsigned long esr; /* error status register */
- unsigned long ear; /* error address register */
- unsigned long car; /* cache control register */
- unsigned long ioc_stat0; /* I/O controller status register 0 */
- unsigned long ioc_stat1; /* I/O controller status register 1 */
- unsigned long va; /* virtual address register */
-};
-
-union el_lca {
- struct el_common * c;
- struct el_lca_mcheck_long * l;
- struct el_lca_mcheck_short * s;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the Noname machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here. In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip volatile int __force *
-#define vuip volatile unsigned int __force *
-#define vulp volatile unsigned long __force *
-
-#define LCA_SET_HAE \
- do { \
- if (addr >= (1UL << 24)) { \
- unsigned long msb = addr & 0xf8000000; \
- addr -= msb; \
- set_hae(msb); \
- } \
- } while (0)
-
-
-__EXTERN_INLINE u8 lca_ioread8(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x00;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x00;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x00;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x00;
- }
-
- w = __kernel_insbl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u16 lca_ioread16(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long result, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x08;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x08;
- }
-
- result = *(vip) ((addr << 5) + base_and_type);
- return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long w, base_and_type;
-
- if (addr >= LCA_DENSE_MEM) {
- addr -= LCA_DENSE_MEM;
- LCA_SET_HAE;
- base_and_type = LCA_SPARSE_MEM + 0x08;
- } else {
- addr -= LCA_IO;
- base_and_type = LCA_IO + 0x08;
- }
-
- w = __kernel_inswl(b, addr & 3);
- *(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u32 lca_ioread32(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- return *(vuip)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- *(vuip)addr = b;
-}
-
-__EXTERN_INLINE u64 lca_ioread64(const void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- return *(vulp)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite64(u64 b, void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- if (addr < LCA_DENSE_MEM)
- addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
- *(vulp)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
-{
- return (void __iomem *)(addr + LCA_IO);
-}
-
-__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
- unsigned long size)
-{
- return (void __iomem *)(addr + LCA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
-{
- return addr >= IDENT_ADDR + 0x120000000UL;
-}
-
-__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
-{
- return (unsigned long)addr >= LCA_DENSE_MEM;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX lca
-#define lca_trivial_rw_bw 2
-#define lca_trivial_rw_lq 1
-#define lca_trivial_io_bw 0
-#define lca_trivial_io_lq 0
-#define lca_trivial_iounmap 1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_LCA__H__ */
diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h
index a04d76b96089..3a88812b7165 100644
--- a/arch/alpha/include/asm/dma.h
+++ b/arch/alpha/include/asm/dma.h
@@ -82,11 +82,6 @@
just a wiring limit.
*/
-/* The maximum address for ISA DMA transfer on Alpha XL, due to an
- hardware SIO limitation, is 64MB.
-*/
-#define ALPHA_XL_MAX_ISA_DMA_ADDRESS 0x04000000UL
-
/* The maximum address for ISA DMA transfer on RUFFIAN,
due to an hardware SIO limitation, is 16MB.
*/
@@ -107,9 +102,7 @@
#ifdef CONFIG_ALPHA_GENERIC
# define MAX_ISA_DMA_ADDRESS (alpha_mv.max_isa_dma_address)
#else
-# if defined(CONFIG_ALPHA_XL)
-# define MAX_ISA_DMA_ADDRESS ALPHA_XL_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_RUFFIAN)
+# if defined(CONFIG_ALPHA_RUFFIAN)
# define MAX_ISA_DMA_ADDRESS ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
# elif defined(CONFIG_ALPHA_SABLE)
# define MAX_ISA_DMA_ADDRESS ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 0c54ddb5b33e..2bb8cbeedf91 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -203,14 +203,10 @@ static inline int generic_is_mmio(const volatile void __iomem *a)
#else
-#if defined(CONFIG_ALPHA_APECS)
-# include <asm/core_apecs.h>
-#elif defined(CONFIG_ALPHA_CIA)
+#if defined(CONFIG_ALPHA_CIA)
# include <asm/core_cia.h>
#elif defined(CONFIG_ALPHA_IRONGATE)
# include <asm/core_irongate.h>
-#elif defined(CONFIG_ALPHA_LCA)
-# include <asm/core_lca.h>
#elif defined(CONFIG_ALPHA_MARVEL)
# include <asm/core_marvel.h>
#elif defined(CONFIG_ALPHA_MCPCIA)
diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h
index 442097c56934..e7d22357a5a6 100644
--- a/arch/alpha/include/asm/irq.h
+++ b/arch/alpha/include/asm/irq.h
@@ -31,16 +31,12 @@
# define NR_IRQS (32768 + 16) /* marvel - 32 pids */
# endif
-#elif defined(CONFIG_ALPHA_CABRIOLET) || \
- defined(CONFIG_ALPHA_EB66P) || \
- defined(CONFIG_ALPHA_EB164) || \
+#elif defined(CONFIG_ALPHA_EB164) || \
defined(CONFIG_ALPHA_PC164) || \
defined(CONFIG_ALPHA_LX164)
# define NR_IRQS 35
-#elif defined(CONFIG_ALPHA_EB66) || \
- defined(CONFIG_ALPHA_EB64P) || \
- defined(CONFIG_ALPHA_MIKASA)
+#elif defined(CONFIG_ALPHA_MIKASA)
# define NR_IRQS 32
#elif defined(CONFIG_ALPHA_ALCOR) || \
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 706ce8625e35..bd5d62fa4a9a 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -22,14 +22,14 @@ obj-$(CONFIG_AUDIT) += audit.o
ifdef CONFIG_ALPHA_GENERIC
-obj-y += core_apecs.o core_cia.o core_irongate.o core_lca.o \
+obj-y += core_cia.o core_irongate.o \
core_mcpcia.o core_polaris.o core_t2.o \
core_tsunami.o
-obj-y += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
+obj-y += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eiger.o \
sys_miata.o sys_mikasa.o sys_nautilus.o \
sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
- sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
+ sys_sable.o sys_sx164.o sys_takara.o
ifndef CONFIG_ALPHA_LEGACY_START_ADDRESS
obj-y += core_marvel.o core_titan.o core_wildfire.o
@@ -48,10 +48,8 @@ else
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
# Core logic support
-obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o
obj-$(CONFIG_ALPHA_IRONGATE) += core_irongate.o
-obj-$(CONFIG_ALPHA_LCA) += core_lca.o
obj-$(CONFIG_ALPHA_MARVEL) += core_marvel.o gct.o
obj-$(CONFIG_ALPHA_MCPCIA) += core_mcpcia.o
obj-$(CONFIG_ALPHA_POLARIS) += core_polaris.o
@@ -62,12 +60,8 @@ obj-$(CONFIG_ALPHA_WILDFIRE) += core_wildfire.o
# Board support
obj-$(CONFIG_ALPHA_ALCOR) += sys_alcor.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_CABRIOLET) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- pc873xx.o
obj-$(CONFIG_ALPHA_EB164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
pc873xx.o
-obj-$(CONFIG_ALPHA_EB66P) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- pc873xx.o
obj-$(CONFIG_ALPHA_LX164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
smc37c93x.o
obj-$(CONFIG_ALPHA_PC164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -75,8 +69,6 @@ obj-$(CONFIG_ALPHA_PC164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
obj-$(CONFIG_ALPHA_DP264) += sys_dp264.o irq_i8259.o es1888.o smc37c669.o
obj-$(CONFIG_ALPHA_SHARK) += sys_dp264.o irq_i8259.o es1888.o smc37c669.o
obj-$(CONFIG_ALPHA_TITAN) += sys_titan.o irq_i8259.o smc37c669.o
-obj-$(CONFIG_ALPHA_EB64P) += sys_eb64p.o irq_i8259.o
-obj-$(CONFIG_ALPHA_EB66) += sys_eb64p.o irq_i8259.o
obj-$(CONFIG_ALPHA_EIGER) += sys_eiger.o irq_i8259.o
obj-$(CONFIG_ALPHA_MARVEL) += sys_marvel.o
obj-$(CONFIG_ALPHA_MIATA) += sys_miata.o irq_pyxis.o irq_i8259.o \
@@ -88,11 +80,6 @@ obj-$(CONFIG_ALPHA_RAWHIDE) += sys_rawhide.o irq_i8259.o
obj-$(CONFIG_ALPHA_RUFFIAN) += sys_ruffian.o irq_pyxis.o irq_i8259.o
obj-$(CONFIG_ALPHA_RX164) += sys_rx164.o irq_i8259.o
obj-$(CONFIG_ALPHA_SABLE) += sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_AVANTI) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_NONAME) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_P2K) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_XL) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
obj-$(CONFIG_ALPHA_SX164) += sys_sx164.o irq_pyxis.o irq_i8259.o \
irq_srm.o smc37c669.o
obj-$(CONFIG_ALPHA_TAKARA) += sys_takara.o irq_i8259.o pc873xx.o
diff --git a/arch/alpha/kernel/core_apecs.c b/arch/alpha/kernel/core_apecs.c
deleted file mode 100644
index 6df765ff2b10..000000000000
--- a/arch/alpha/kernel/core_apecs.c
+++ /dev/null
@@ -1,420 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/core_apecs.c
- *
- * Rewritten for Apecs from the lca.c from:
- *
- * Written by David Mosberger ([email protected]) with some code
- * taken from Dave Rusling's ([email protected]) 32-bit
- * bios code.
- *
- * Code common to all APECS core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * NOTE: Herein lie back-to-back mb instructions. They are magic.
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction. Another involves timing. Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBGC(args) printk args
-#else
-# define DBGC(args)
-#endif
-
-#define vuip volatile unsigned int *
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the APECS_HAXR2 register
- * accordingly. It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:11 Device select bit.
- * 10:8 Function number
- * 7:2 Register number
- *
- * Type 1:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:24 reserved
- * 23:16 bus number (8 bits = 128 possible buses)
- * 15:11 Device number (5 bits)
- * 10:8 function number
- * 7:2 register number
- *
- * Notes:
- * The function number selects which function of a multi-function device
- * (e.g., SCSI and Ethernet).
- *
- * The register selects a DWORD (32 bit) register offset. Hence it
- * doesn't get shifted by 2 bits as we want to "drop" the bottom two
- * bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
- unsigned long *pci_addr, unsigned char *type1)
-{
- unsigned long addr;
- u8 bus = pbus->number;
-
- DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
- " pci_addr=0x%p, type1=0x%p)\n",
- bus, device_fn, where, pci_addr, type1));
-
- if (bus == 0) {
- int device = device_fn >> 3;
-
- /* type 0 configuration cycle: */
-
- if (device > 20) {
- DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
- device));
- return -1;
- }
-
- *type1 = 0;
- addr = (device_fn << 8) | (where);
- } else {
- /* type 1 configuration cycle: */
- *type1 = 1;
- addr = (bus << 16) | (device_fn << 8) | (where);
- }
- *pci_addr = addr;
- DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
- return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
- unsigned long flags;
- unsigned int stat0, value;
- unsigned int haxr2 = 0;
-
- local_irq_save(flags); /* avoid getting hit by machine check */
-
- DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
- DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
-
- /* If Type1 access, must set HAE #2. */
- if (type1) {
- haxr2 = *(vuip)APECS_IOC_HAXR2;
- mb();
- *(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
- DBGC(("conf_read: TYPE1 access\n"));
- }
-
- draina();
- mcheck_expected(0) = 1;
- mcheck_taken(0) = 0;
- mb();
-
- /* Access configuration space. */
-
- /* Some SRMs step on these registers during a machine check. */
- asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
- : "$9", "$10", "$11", "$12", "$13", "$14", "memory");
-
- if (mcheck_taken(0)) {
- mcheck_taken(0) = 0;
- value = 0xffffffffU;
- mb();
- }
- mcheck_expected(0) = 0;
- mb();
-
-#if 1
- /*
- * [email protected]. This code is needed for the
- * EB64+ as it does not generate a machine check (why I don't
- * know). When we build kernels for one particular platform
- * then we can make this conditional on the type.
- */
- draina();
-
- /* Now look for any errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
- DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
-
- /* Is any error bit set? */
- if (stat0 & 0xffe0U) {
- /* If not NDEV, print status. */
- if (!(stat0 & 0x0800)) {
- printk("apecs.c:conf_read: got stat0=%x\n", stat0);
- }
-
- /* Reset error status. */
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
- wrmces(0x7); /* reset machine check */
- value = 0xffffffff;
- }
-#endif
-
- /* If Type1 access, must reset HAE #2 so normal IO space ops work. */
- if (type1) {
- *(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
- mb();
- }
- local_irq_restore(flags);
-
- return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
- unsigned long flags;
- unsigned int stat0;
- unsigned int haxr2 = 0;
-
- local_irq_save(flags); /* avoid getting hit by machine check */
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
-
- /* If Type1 access, must set HAE #2. */
- if (type1) {
- haxr2 = *(vuip)APECS_IOC_HAXR2;
- mb();
- *(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
- }
-
- draina();
- mcheck_expected(0) = 1;
- mb();
-
- /* Access configuration space. */
- *(vuip)addr = value;
- mb();
- mb(); /* magic */
- mcheck_expected(0) = 0;
- mb();
-
-#if 1
- /*
- * [email protected]. This code is needed for the
- * EB64+ as it does not generate a machine check (why I don't
- * know). When we build kernels for one particular platform
- * then we can make this conditional on the type.
- */
- draina();
-
- /* Now look for any errors. */
- stat0 = *(vuip)APECS_IOC_DCSR;
-
- /* Is any error bit set? */
- if (stat0 & 0xffe0U) {
- /* If not NDEV, print status. */
- if (!(stat0 & 0x0800)) {
- printk("apecs.c:conf_write: got stat0=%x\n", stat0);
- }
-
- /* Reset error status. */
- *(vuip)APECS_IOC_DCSR = stat0;
- mb();
- wrmces(0x7); /* reset machine check */
- }
-#endif
-
- /* If Type1 access, must reset HAE #2 so normal IO space ops work. */
- if (type1) {
- *(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
- mb();
- }
- local_irq_restore(flags);
-}
-
-static int
-apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr, pci_addr;
- unsigned char type1;
- long mask;
- int shift;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- mask = (size - 1) * 8;
- shift = (where & 3) * 8;
- addr = (pci_addr << 5) + mask + APECS_CONF;
- *value = conf_read(addr, type1) >> (shift);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr, pci_addr;
- unsigned char type1;
- long mask;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- mask = (size - 1) * 8;
- addr = (pci_addr << 5) + mask + APECS_CONF;
- conf_write(addr, value << ((where & 3) * 8), type1);
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops apecs_pci_ops =
-{
- .read = apecs_read_config,
- .write = apecs_write_config,
-};
-
-void
-apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
- wmb();
- *(vip)APECS_IOC_TBIA = 0;
- mb();
-}
-
-void __init
-apecs_init_arch(void)
-{
- struct pci_controller *hose;
-
- /*
- * Create our single hose.
- */
-
- pci_isa_hose = hose = alloc_pci_controller();
- hose->io_space = &ioport_resource;
- hose->mem_space = &iomem_resource;
- hose->index = 0;
-
- hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
- hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
- hose->sparse_io_base = APECS_IO - IDENT_ADDR;
- hose->dense_io_base = 0;
-
- /*
- * Set up the PCI to main memory translation windows.
- *
- * Window 1 is direct access 1GB at 1GB
- * Window 2 is scatter-gather 8MB at 8MB (for isa)
- */
- hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
- SMP_CACHE_BYTES);
- hose->sg_pci = NULL;
- __direct_map_base = 0x40000000;
- __direct_map_size = 0x40000000;
-
- *(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
- *(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
- *(vuip)APECS_IOC_TB1R = 0;
-
- *(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
- *(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
- *(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
-
- apecs_pci_tbi(hose, 0, -1);
-
- /*
- * Finally, clear the HAXR2 register, which gets used
- * for PCI Config Space accesses. That is the way
- * we want to use it, and we do not want to depend on
- * what ARC or SRM might have left behind...
- */
- *(vuip)APECS_IOC_HAXR2 = 0;
- mb();
-}
-
-void
-apecs_pci_clr_err(void)
-{
- unsigned int jd;
-
- jd = *(vuip)APECS_IOC_DCSR;
- if (jd & 0xffe0L) {
- *(vuip)APECS_IOC_SEAR;
- *(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
- mb();
- *(vuip)APECS_IOC_DCSR;
- }
- *(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
- mb();
- *(vuip)APECS_IOC_TBIA;
-}
-
-void
-apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
- struct el_common *mchk_header;
- struct el_apecs_procdata *mchk_procdata;
- struct el_apecs_sysdata_mcheck *mchk_sysdata;
-
- mchk_header = (struct el_common *)la_ptr;
-
- mchk_procdata = (struct el_apecs_procdata *)
- (la_ptr + mchk_header->proc_offset
- - sizeof(mchk_procdata->paltemp));
-
- mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
- (la_ptr + mchk_header->sys_offset);
-
-
- /* Clear the error before any reporting. */
- mb();
- mb(); /* magic */
- draina();
- apecs_pci_clr_err();
- wrmces(0x7); /* reset machine check pending flag */
- mb();
-
- process_mcheck_info(vector, la_ptr, "APECS",
- (mcheck_expected(0)
- && (mchk_sysdata->epic_dcsr & 0x0c00UL)));
-}
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c
deleted file mode 100644
index 4616b11643d5..000000000000
--- a/arch/alpha/kernel/core_lca.c
+++ /dev/null
@@ -1,473 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/core_lca.c
- *
- * Written by David Mosberger ([email protected]) with some code
- * taken from Dave Rusling's ([email protected]) 32-bit
- * bios code.
- *
- * Code common to all LCA core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_lca.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-#include <asm/ptrace.h>
-#include <asm/irq_regs.h>
-#include <asm/smp.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * BIOS32-style PCI interface:
- */
-
-/*
- * Machine check reasons. Defined according to PALcode sources
- * (osf.h and platform.h).
- */
-#define MCHK_K_TPERR 0x0080
-#define MCHK_K_TCPERR 0x0082
-#define MCHK_K_HERR 0x0084
-#define MCHK_K_ECC_C 0x0086
-#define MCHK_K_ECC_NC 0x0088
-#define MCHK_K_UNKNOWN 0x008A
-#define MCHK_K_CACKSOFT 0x008C
-#define MCHK_K_BUGCHECK 0x008E
-#define MCHK_K_OS_BUGCHECK 0x0090
-#define MCHK_K_DCPERR 0x0092
-#define MCHK_K_ICPERR 0x0094
-
-
-/*
- * Platform-specific machine-check reasons:
- */
-#define MCHK_K_SIO_SERR 0x204 /* all platforms so far */
-#define MCHK_K_SIO_IOCHK 0x206 /* all platforms so far */
-#define MCHK_K_DCSR 0x208 /* all but Noname */
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the LCA_IOC_CONF register
- * accordingly. It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:11 Device select bit.
- * 10:8 Function number
- * 7:2 Register number
- *
- * Type 1:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:24 reserved
- * 23:16 bus number (8 bits = 128 possible buses)
- * 15:11 Device number (5 bits)
- * 10:8 function number
- * 7:2 register number
- *
- * Notes:
- * The function number selects which function of a multi-function device
- * (e.g., SCSI and Ethernet).
- *
- * The register selects a DWORD (32 bit) register offset. Hence it
- * doesn't get shifted by 2 bits as we want to "drop" the bottom two
- * bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
- unsigned long *pci_addr)
-{
- unsigned long addr;
- u8 bus = pbus->number;
-
- if (bus == 0) {
- int device = device_fn >> 3;
- int func = device_fn & 0x7;
-
- /* Type 0 configuration cycle. */
-
- if (device > 12) {
- return -1;
- }
-
- *(vulp)LCA_IOC_CONF = 0;
- addr = (1 << (11 + device)) | (func << 8) | where;
- } else {
- /* Type 1 configuration cycle. */
- *(vulp)LCA_IOC_CONF = 1;
- addr = (bus << 16) | (device_fn << 8) | where;
- }
- *pci_addr = addr;
- return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr)
-{
- unsigned long flags, code, stat0;
- unsigned int value;
-
- local_irq_save(flags);
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vulp)LCA_IOC_STAT0;
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Access configuration space. */
- value = *(vuip)addr;
- draina();
-
- stat0 = *(vulp)LCA_IOC_STAT0;
- if (stat0 & LCA_IOC_STAT0_ERR) {
- code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
- & LCA_IOC_STAT0_CODE_MASK);
- if (code != 1) {
- printk("lca.c:conf_read: got stat0=%lx\n", stat0);
- }
-
- /* Reset error status. */
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Reset machine check. */
- wrmces(0x7);
-
- value = 0xffffffff;
- }
- local_irq_restore(flags);
- return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value)
-{
- unsigned long flags, code, stat0;
-
- local_irq_save(flags); /* avoid getting hit by machine check */
-
- /* Reset status register to avoid losing errors. */
- stat0 = *(vulp)LCA_IOC_STAT0;
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Access configuration space. */
- *(vuip)addr = value;
- draina();
-
- stat0 = *(vulp)LCA_IOC_STAT0;
- if (stat0 & LCA_IOC_STAT0_ERR) {
- code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
- & LCA_IOC_STAT0_CODE_MASK);
- if (code != 1) {
- printk("lca.c:conf_write: got stat0=%lx\n", stat0);
- }
-
- /* Reset error status. */
- *(vulp)LCA_IOC_STAT0 = stat0;
- mb();
-
- /* Reset machine check. */
- wrmces(0x7);
- }
- local_irq_restore(flags);
-}
-
-static int
-lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr, pci_addr;
- long mask;
- int shift;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- shift = (where & 3) * 8;
- mask = (size - 1) * 8;
- addr = (pci_addr << 5) + mask + LCA_CONF;
- *value = conf_read(addr) >> (shift);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
- u32 value)
-{
- unsigned long addr, pci_addr;
- long mask;
-
- if (mk_conf_addr(bus, devfn, where, &pci_addr))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- mask = (size - 1) * 8;
- addr = (pci_addr << 5) + mask + LCA_CONF;
- conf_write(addr, value << ((where & 3) * 8));
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops lca_pci_ops =
-{
- .read = lca_read_config,
- .write = lca_write_config,
-};
-
-void
-lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
- wmb();
- *(vulp)LCA_IOC_TBIA = 0;
- mb();
-}
-
-void __init
-lca_init_arch(void)
-{
- struct pci_controller *hose;
-
- /*
- * Create our single hose.
- */
-
- pci_isa_hose = hose = alloc_pci_controller();
- hose->io_space = &ioport_resource;
- hose->mem_space = &iomem_resource;
- hose->index = 0;
-
- hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
- hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
- hose->sparse_io_base = LCA_IO - IDENT_ADDR;
- hose->dense_io_base = 0;
-
- /*
- * Set up the PCI to main memory translation windows.
- *
- * Mimic the SRM settings for the direct-map window.
- * Window 0 is scatter-gather 8MB at 8MB (for isa).
- * Window 1 is direct access 1GB at 1GB.
- *
- * Note that we do not try to save any of the DMA window CSRs
- * before setting them, since we cannot read those CSRs on LCA.
- */
- hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
- SMP_CACHE_BYTES);
- hose->sg_pci = NULL;
- __direct_map_base = 0x40000000;
- __direct_map_size = 0x40000000;
-
- *(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
- *(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
- *(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
-
- *(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
- *(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
- *(vulp)LCA_IOC_T_BASE1 = 0;
-
- *(vulp)LCA_IOC_TB_ENA = 0x80;
-
- lca_pci_tbi(hose, 0, -1);
-
- /*
- * Disable PCI parity for now. The NCR53c810 chip has
- * troubles meeting the PCI spec which results in
- * data parity errors.
- */
- *(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
-
- /*
- * Finally, set up for restoring the correct HAE if using SRM.
- * Again, since we cannot read many of the CSRs on the LCA,
- * one of which happens to be the HAE, we save the value that
- * the SRM will expect...
- */
- if (alpha_using_srm)
- srm_hae = 0x80000000UL;
-}
-
-/*
- * Constants used during machine-check handling. I suppose these
- * could be moved into lca.h but I don't see much reason why anybody
- * else would want to use them.
- */
-
-#define ESR_EAV (1UL<< 0) /* error address valid */
-#define ESR_CEE (1UL<< 1) /* correctable error */
-#define ESR_UEE (1UL<< 2) /* uncorrectable error */
-#define ESR_WRE (1UL<< 3) /* write-error */
-#define ESR_SOR (1UL<< 4) /* error source */
-#define ESR_CTE (1UL<< 7) /* cache-tag error */
-#define ESR_MSE (1UL<< 9) /* multiple soft errors */
-#define ESR_MHE (1UL<<10) /* multiple hard errors */
-#define ESR_NXM (1UL<<12) /* non-existent memory */
-
-#define IOC_ERR ( 1<<4) /* ioc logs an error */
-#define IOC_CMD_SHIFT 0
-#define IOC_CMD (0xf<<IOC_CMD_SHIFT)
-#define IOC_CODE_SHIFT 8
-#define IOC_CODE (0xf<<IOC_CODE_SHIFT)
-#define IOC_LOST ( 1<<5)
-#define IOC_P_NBR ((__u32) ~((1<<13) - 1))
-
-static void
-mem_error(unsigned long esr, unsigned long ear)
-{
- printk(" %s %s error to %s occurred at address %x\n",
- ((esr & ESR_CEE) ? "Correctable" :
- (esr & ESR_UEE) ? "Uncorrectable" : "A"),
- (esr & ESR_WRE) ? "write" : "read",
- (esr & ESR_SOR) ? "memory" : "b-cache",
- (unsigned) (ear & 0x1ffffff8));
- if (esr & ESR_CTE) {
- printk(" A b-cache tag parity error was detected.\n");
- }
- if (esr & ESR_MSE) {
- printk(" Several other correctable errors occurred.\n");
- }
- if (esr & ESR_MHE) {
- printk(" Several other uncorrectable errors occurred.\n");
- }
- if (esr & ESR_NXM) {
- printk(" Attempted to access non-existent memory.\n");
- }
-}
-
-static void
-ioc_error(__u32 stat0, __u32 stat1)
-{
- static const char * const pci_cmd[] = {
- "Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
- "Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
- "Rsvd4", "Configuration Read", "Configuration Write",
- "Memory Read Multiple", "Dual Address", "Memory Read Line",
- "Memory Write and Invalidate"
- };
- static const char * const err_name[] = {
- "exceeded retry limit", "no device", "bad data parity",
- "target abort", "bad address parity", "page table read error",
- "invalid page", "data error"
- };
- unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
- unsigned cmd = (stat0 & IOC_CMD) >> IOC_CMD_SHIFT;
-
- printk(" %s initiated PCI %s cycle to address %x"
- " failed due to %s.\n",
- code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
-
- if (code == 5 || code == 6) {
- printk(" (Error occurred at PCI memory address %x.)\n",
- (stat0 & ~IOC_P_NBR));
- }
- if (stat0 & IOC_LOST) {
- printk(" Other PCI errors occurred simultaneously.\n");
- }
-}
-
-void
-lca_machine_check(unsigned long vector, unsigned long la_ptr)
-{
- const char * reason;
- union el_lca el;
-
- el.c = (struct el_common *) la_ptr;
-
- wrmces(rdmces()); /* reset machine check pending flag */
-
- printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
- vector, get_irq_regs()->pc, (unsigned int) el.c->code);
-
- /*
- * The first quadword after the common header always seems to
- * be the machine check reason---don't know why this isn't
- * part of the common header instead. In the case of a long
- * logout frame, the upper 32 bits is the machine check
- * revision level, which we ignore for now.
- */
- switch ((unsigned int) el.c->code) {
- case MCHK_K_TPERR: reason = "tag parity error"; break;
- case MCHK_K_TCPERR: reason = "tag control parity error"; break;
- case MCHK_K_HERR: reason = "access to non-existent memory"; break;
- case MCHK_K_ECC_C: reason = "correctable ECC error"; break;
- case MCHK_K_ECC_NC: reason = "non-correctable ECC error"; break;
- case MCHK_K_CACKSOFT: reason = "MCHK_K_CACKSOFT"; break;
- case MCHK_K_BUGCHECK: reason = "illegal exception in PAL mode"; break;
- case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
- case MCHK_K_DCPERR: reason = "d-cache parity error"; break;
- case MCHK_K_ICPERR: reason = "i-cache parity error"; break;
- case MCHK_K_SIO_SERR: reason = "SIO SERR occurred on PCI bus"; break;
- case MCHK_K_SIO_IOCHK: reason = "SIO IOCHK occurred on ISA bus"; break;
- case MCHK_K_DCSR: reason = "MCHK_K_DCSR"; break;
- case MCHK_K_UNKNOWN:
- default: reason = "unknown"; break;
- }
-
- switch (el.c->size) {
- case sizeof(struct el_lca_mcheck_short):
- printk(KERN_CRIT
- " Reason: %s (short frame%s, dc_stat=%#lx):\n",
- reason, el.c->retry ? ", retryable" : "",
- el.s->dc_stat);
- if (el.s->esr & ESR_EAV) {
- mem_error(el.s->esr, el.s->ear);
- }
- if (el.s->ioc_stat0 & IOC_ERR) {
- ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
- }
- break;
-
- case sizeof(struct el_lca_mcheck_long):
- printk(KERN_CRIT " Reason: %s (long frame%s):\n",
- reason, el.c->retry ? ", retryable" : "");
- printk(KERN_CRIT
- " reason: %#lx exc_addr: %#lx dc_stat: %#lx\n",
- el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
- printk(KERN_CRIT " car: %#lx\n", el.l->car);
- if (el.l->esr & ESR_EAV) {
- mem_error(el.l->esr, el.l->ear);
- }
- if (el.l->ioc_stat0 & IOC_ERR) {
- ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
- }
- break;
-
- default:
- printk(KERN_CRIT " Unknown errorlog size %d\n", el.c->size);
- }
-
- /* Dump the logout area to give all info. */
-#ifdef CONFIG_VERBOSE_MCHECK
- if (alpha_verbose_mcheck > 1) {
- unsigned long * ptr = (unsigned long *) la_ptr;
- long i;
- for (i = 0; i < el.c->size / sizeof(long); i += 2) {
- printk(KERN_CRIT " +%8lx %016lx %016lx\n",
- i*sizeof(long), ptr[i], ptr[i+1]);
- }
- }
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 1dcf0d9038fd..29c6c477ac35 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -98,10 +98,6 @@ init_i8259a_irqs(void)
#if defined(CONFIG_ALPHA_GENERIC)
# define IACK_SC alpha_mv.iack_sc
-#elif defined(CONFIG_ALPHA_APECS)
-# define IACK_SC APECS_IACK_SC
-#elif defined(CONFIG_ALPHA_LCA)
-# define IACK_SC LCA_IACK_SC
#elif defined(CONFIG_ALPHA_CIA)
# define IACK_SC CIA_IACK_SC
#elif defined(CONFIG_ALPHA_PYXIS)
diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h
index 18043af45e2b..a16325ce21c4 100644
--- a/arch/alpha/kernel/pci_impl.h
+++ b/arch/alpha/kernel/pci_impl.h
@@ -143,9 +143,7 @@ struct pci_iommu_arena
unsigned int align_entry;
};
-#if defined(CONFIG_ALPHA_SRM) && \
- (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
- defined(CONFIG_ALPHA_AVANTI))
+#if defined(CONFIG_ALPHA_SRM) && defined(CONFIG_ALPHA_CIA)
# define NEED_SRM_SAVE_RESTORE
#else
# undef NEED_SRM_SAVE_RESTORE
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 5b1d0d71d479..a8bc3ead776b 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -17,13 +17,6 @@ struct pci_dev;
struct pci_controller;
struct pci_bus;
-/* core_apecs.c */
-extern struct pci_ops apecs_pci_ops;
-extern void apecs_init_arch(void);
-extern void apecs_pci_clr_err(void);
-extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
/* core_cia.c */
extern struct pci_ops cia_pci_ops;
extern void cia_init_pci(void);
@@ -39,12 +32,6 @@ extern int irongate_pci_clr_err(void);
extern void irongate_init_arch(void);
#define irongate_pci_tbi ((void *)0)
-/* core_lca.c */
-extern struct pci_ops lca_pci_ops;
-extern void lca_init_arch(void);
-extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
/* core_marvel.c */
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 3b833bd97817..bebdffafaee8 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -171,27 +171,17 @@ EXPORT_SYMBOL(__direct_map_size);
asm(".weak "#X)
WEAK(alcor_mv);
-WEAK(alphabook1_mv);
-WEAK(avanti_mv);
-WEAK(cabriolet_mv);
WEAK(clipper_mv);
WEAK(dp264_mv);
WEAK(eb164_mv);
-WEAK(eb64p_mv);
-WEAK(eb66_mv);
-WEAK(eb66p_mv);
WEAK(eiger_mv);
WEAK(lx164_mv);
WEAK(marvel_ev7_mv);
WEAK(miata_mv);
-WEAK(mikasa_mv);
WEAK(mikasa_primo_mv);
WEAK(monet_mv);
WEAK(nautilus_mv);
-WEAK(noname_mv);
-WEAK(noritake_mv);
WEAK(noritake_primo_mv);
-WEAK(p2k_mv);
WEAK(pc164_mv);
WEAK(privateer_mv);
WEAK(rawhide_mv);
@@ -204,7 +194,6 @@ WEAK(takara_mv);
WEAK(titan_mv);
WEAK(webbrick_mv);
WEAK(wildfire_mv);
-WEAK(xl_mv);
WEAK(xlt_mv);
#undef WEAK
@@ -692,12 +681,6 @@ static int eb164_indices[] = {0,0,0,1,1,1,1,1,2,2,2,2,3,3,3,3,4};
static char alcor_names[][16] = {"Alcor", "Maverick", "Bret"};
static int alcor_indices[] = {0,0,0,1,1,1,0,0,0,0,0,0,2,2,2,2,2,2};
-static char eb64p_names[][16] = {"EB64+", "Cabriolet", "AlphaPCI64"};
-static int eb64p_indices[] = {0,0,1,2};
-
-static char eb66_names[][8] = {"EB66", "EB66+"};
-static int eb66_indices[] = {0,0,1};
-
static char marvel_names[][16] = {
"Marvel/EV7"
};
@@ -736,21 +719,21 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
NULL, /* Morgan */
NULL, /* Sable -- see below. */
NULL, /* Medulla */
- &noname_mv,
+ NULL, /* Noname */
NULL, /* Turbolaser */
- &avanti_mv,
+ NULL, /* Avanti */
NULL, /* Mustang */
NULL, /* Alcor, Bret, Maverick. HWRPB inaccurate? */
NULL, /* Tradewind */
NULL, /* Mikasa -- see below. */
NULL, /* EB64 */
- NULL, /* EB66 -- see variation. */
- NULL, /* EB64+ -- see variation. */
- &alphabook1_mv,
+ NULL, /* EB66 */
+ NULL, /* EB64+ */
+ NULL, /* Alphabook1 */
&rawhide_mv,
NULL, /* K2 */
NULL, /* Lynx */
- &xl_mv,
+ NULL, /* XL */
NULL, /* EB164 -- see variation. */
NULL, /* Noritake -- see below. */
NULL, /* Cortex */
@@ -789,19 +772,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
&eb164_mv, &pc164_mv, &lx164_mv, &sx164_mv, &rx164_mv
};
- static struct alpha_machine_vector *eb64p_vecs[] __initdata =
- {
- &eb64p_mv,
- &cabriolet_mv,
- &cabriolet_mv /* AlphaPCI64 */
- };
-
- static struct alpha_machine_vector *eb66_vecs[] __initdata =
- {
- &eb66_mv,
- &eb66p_mv
- };
-
static struct alpha_machine_vector *marvel_vecs[] __initdata =
{
&marvel_ev7_mv,
@@ -869,14 +839,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
if (vec == &eb164_mv && cpu == EV56_CPU)
vec = &pc164_mv;
break;
- case ST_DEC_EB64P:
- if (member < ARRAY_SIZE(eb64p_indices))
- vec = eb64p_vecs[eb64p_indices[member]];
- break;
- case ST_DEC_EB66:
- if (member < ARRAY_SIZE(eb66_indices))
- vec = eb66_vecs[eb66_indices[member]];
- break;
case ST_DEC_MARVEL:
if (member < ARRAY_SIZE(marvel_indices))
vec = marvel_vecs[marvel_indices[member]];
@@ -891,16 +853,10 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
vec = tsunami_vecs[tsunami_indices[member]];
break;
case ST_DEC_1000:
- if (cpu == EV5_CPU || cpu == EV56_CPU)
- vec = &mikasa_primo_mv;
- else
- vec = &mikasa_mv;
+ vec = &mikasa_primo_mv;
break;
case ST_DEC_NORITAKE:
- if (cpu == EV5_CPU || cpu == EV56_CPU)
- vec = &noritake_primo_mv;
- else
- vec = &noritake_mv;
+ vec = &noritake_primo_mv;
break;
case ST_DEC_2100_A500:
vec = &sable_gamma_mv;
@@ -916,26 +872,16 @@ get_sysvec_byname(const char *name)
static struct alpha_machine_vector *all_vecs[] __initdata =
{
&alcor_mv,
- &alphabook1_mv,
- &avanti_mv,
- &cabriolet_mv,
&clipper_mv,
&dp264_mv,
&eb164_mv,
- &eb64p_mv,
- &eb66_mv,
- &eb66p_mv,
&eiger_mv,
&lx164_mv,
&miata_mv,
- &mikasa_mv,
&mikasa_primo_mv,
&monet_mv,
&nautilus_mv,
- &noname_mv,
- &noritake_mv,
&noritake_primo_mv,
- &p2k_mv,
&pc164_mv,
&privateer_mv,
&rawhide_mv,
@@ -947,7 +893,6 @@ get_sysvec_byname(const char *name)
&takara_mv,
&webbrick_mv,
&wildfire_mv,
- &xl_mv,
&xlt_mv
};
@@ -1009,14 +954,6 @@ get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
if (member < ARRAY_SIZE(alcor_indices))
*variation_name = alcor_names[alcor_indices[member]];
break;
- case ST_DEC_EB64P:
- if (member < ARRAY_SIZE(eb64p_indices))
- *variation_name = eb64p_names[eb64p_indices[member]];
- break;
- case ST_DEC_EB66:
- if (member < ARRAY_SIZE(eb66_indices))
- *variation_name = eb66_names[eb66_indices[member]];
- break;
case ST_DEC_MARVEL:
if (member < ARRAY_SIZE(marvel_indices))
*variation_name = marvel_names[marvel_indices[member]];
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index 47459b73cdb7..06a950072f82 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -23,9 +23,7 @@
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
-#include <asm/core_apecs.h>
#include <asm/core_cia.h>
-#include <asm/core_lca.h>
#include <asm/tlbflush.h>
#include "proto.h"
@@ -232,13 +230,6 @@ cabriolet_enable_ide(void)
}
}
-static inline void __init
-cabriolet_init_pci(void)
-{
- common_init_pci();
- cabriolet_enable_ide();
-}
-
static inline void __init
cia_cab_init_pci(void)
{
@@ -317,32 +308,6 @@ alphapc164_init_pci(void)
* The System Vector
*/
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-struct alpha_machine_vector cabriolet_mv __initmv = {
- .vector_name = "Cabriolet",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 35,
- .device_interrupt = cabriolet_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = cabriolet_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = cabriolet_init_pci,
- .pci_map_irq = cabriolet_map_irq,
- .pci_swizzle = common_swizzle,
-};
-#ifndef CONFIG_ALPHA_EB64P
-ALIAS_MV(cabriolet)
-#endif
-#endif
-
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
struct alpha_machine_vector eb164_mv __initmv = {
.vector_name = "EB164",
@@ -368,30 +333,6 @@ struct alpha_machine_vector eb164_mv __initmv = {
ALIAS_MV(eb164)
#endif
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
-struct alpha_machine_vector eb66p_mv __initmv = {
- .vector_name = "EB66+",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 35,
- .device_interrupt = cabriolet_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = cabriolet_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = cabriolet_init_pci,
- .pci_map_irq = eb66p_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb66p)
-#endif
-
#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
struct alpha_machine_vector lx164_mv __initmv = {
.vector_name = "LX164",
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
deleted file mode 100644
index 3c43fd347526..000000000000
--- a/arch/alpha/kernel/sys_eb64p.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/sys_eb64p.c
- *
- * Copyright (C) 1995 David A Rusling
- * Copyright (C) 1996 Jay A Estabrook
- * Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the EB64+ and EB66.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for DISABLED irqs. */
-static unsigned int cached_irq_mask = -1;
-
-static inline void
-eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
-{
- outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
-}
-
-static inline void
-eb64p_enable_irq(struct irq_data *d)
-{
- eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
-}
-
-static void
-eb64p_disable_irq(struct irq_data *d)
-{
- eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
-}
-
-static struct irq_chip eb64p_irq_type = {
- .name = "EB64P",
- .irq_unmask = eb64p_enable_irq,
- .irq_mask = eb64p_disable_irq,
- .irq_mask_ack = eb64p_disable_irq,
-};
-
-static void
-eb64p_device_interrupt(unsigned long vector)
-{
- unsigned long pld;
- unsigned int i;
-
- /* Read the interrupt summary registers */
- pld = inb(0x26) | (inb(0x27) << 8);
-
- /*
- * Now, for every possible bit set, work through
- * them and call the appropriate interrupt handler.
- */
- while (pld) {
- i = ffz(~pld);
- pld &= pld - 1; /* clear least bit set */
-
- if (i == 5) {
- isa_device_interrupt(vector);
- } else {
- handle_irq(16 + i);
- }
- }
-}
-
-static void __init
-eb64p_init_irq(void)
-{
- long i;
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
- /*
- * CABRIO SRM may not set variation correctly, so here we test
- * the high word of the interrupt summary register for the RAZ
- * bits, and hope that a true EB64+ would read all ones...
- */
- if (inw(0x806) != 0xffff) {
- extern struct alpha_machine_vector cabriolet_mv;
-
- printk("Detected Cabriolet: correcting HWRPB.\n");
-
- hwrpb->sys_variation |= 2L << 10;
- hwrpb_update_checksum(hwrpb);
-
- alpha_mv = cabriolet_mv;
- alpha_mv.init_irq();
- return;
- }
-#endif /* GENERIC */
-
- outb(0xff, 0x26);
- outb(0xff, 0x27);
-
- init_i8259a_irqs();
-
- for (i = 16; i < 32; ++i) {
- irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
- irq_set_status_flags(i, IRQ_LEVEL);
- }
-
- common_init_isa_dma();
- if (request_irq(16 + 5, no_action, 0, "isa-cascade", NULL))
- pr_err("Failed to register isa-cascade interrupt\n");
-}
-
-/*
- * PCI Fixup configuration.
- *
- * There are two 8 bit external summary registers as follows:
- *
- * Summary @ 0x26:
- * Bit Meaning
- * 0 Interrupt Line A from slot 0
- * 1 Interrupt Line A from slot 1
- * 2 Interrupt Line B from slot 0
- * 3 Interrupt Line B from slot 1
- * 4 Interrupt Line C from slot 0
- * 5 Interrupt line from the two ISA PICs
- * 6 Tulip
- * 7 NCR SCSI
- *
- * Summary @ 0x27
- * Bit Meaning
- * 0 Interrupt Line C from slot 1
- * 1 Interrupt Line D from slot 0
- * 2 Interrupt Line D from slot 1
- * 3 RAZ
- * 4 RAZ
- * 5 RAZ
- * 6 RAZ
- * 7 RAZ
- *
- * The device to slot mapping looks like:
- *
- * Slot Device
- * 5 NCR SCSI controller
- * 6 PCI on board slot 0
- * 7 PCI on board slot 1
- * 8 Intel SIO PCI-ISA bridge chip
- * 9 Tulip - DECchip 21040 Ethernet controller
- *
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and
- * above for PCI interrupts. The IRQ relates to which bit the interrupt
- * comes in on. This makes interrupt processing much easier.
- */
-
-static int
-eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static char irq_tab[5][5] = {
- /*INT INTA INTB INTC INTD */
- {16+7, 16+7, 16+7, 16+7, 16+7}, /* IdSel 5, slot ?, ?? */
- {16+0, 16+0, 16+2, 16+4, 16+9}, /* IdSel 6, slot ?, ?? */
- {16+1, 16+1, 16+3, 16+8, 16+10}, /* IdSel 7, slot ?, ?? */
- { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */
- {16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 9, TULIP */
- };
- const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
- return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
-struct alpha_machine_vector eb64p_mv __initmv = {
- .vector_name = "EB64+",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 32,
- .device_interrupt = eb64p_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = eb64p_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .kill_arch = NULL,
- .pci_map_irq = eb64p_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb64p)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
-struct alpha_machine_vector eb66_mv __initmv = {
- .vector_name = "EB66",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 32,
- .device_interrupt = eb64p_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = eb64p_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .pci_map_irq = eb64p_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(eb66)
-#endif
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index 7690dfd57cb6..557802398231 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -23,7 +23,6 @@
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
-#include <asm/core_apecs.h>
#include <asm/core_cia.h>
#include <asm/tlbflush.h>
@@ -164,64 +163,9 @@ mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
}
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
- struct el_common *mchk_header;
- unsigned int code;
-
- mchk_header = (struct el_common *)la_ptr;
-
- /* Clear the error before any reporting. */
- mb();
- mb(); /* magic */
- draina();
- apecs_pci_clr_err();
- wrmces(0x7);
- mb();
-
- code = mchk_header->code;
- process_mcheck_info(vector, la_ptr, "MIKASA APECS",
- (mcheck_expected(0)
- && (code == MCHK_NO_DEVSEL
- || code == MCHK_NO_TABT)));
-}
-#endif
-
-
/*
* The System Vector
*/
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector mikasa_mv __initmv = {
- .vector_name = "Mikasa",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = mikasa_apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 32,
- .device_interrupt = mikasa_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = mikasa_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .pci_map_irq = mikasa_map_irq,
- .pci_swizzle = common_swizzle,
-};
-ALIAS_MV(mikasa)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
struct alpha_machine_vector mikasa_primo_mv __initmv = {
.vector_name = "Mikasa-Primo",
DO_EV5_MMU,
@@ -244,4 +188,3 @@ struct alpha_machine_vector mikasa_primo_mv __initmv = {
.pci_swizzle = common_swizzle,
};
ALIAS_MV(mikasa_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index 47f3ce4f719a..eed3f16561c0 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -24,7 +24,6 @@
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
-#include <asm/core_apecs.h>
#include <asm/core_cia.h>
#include <asm/tlbflush.h>
@@ -253,64 +252,6 @@ noritake_swizzle(struct pci_dev *dev, u8 *pinp)
return slot;
}
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
- struct el_common *mchk_header;
- unsigned int code;
-
- mchk_header = (struct el_common *)la_ptr;
-
- /* Clear the error before any reporting. */
- mb();
- mb(); /* magic */
- draina();
- apecs_pci_clr_err();
- wrmces(0x7);
- mb();
-
- code = mchk_header->code;
- process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
- (mcheck_expected(0)
- && (code == MCHK_NO_DEVSEL
- || code == MCHK_NO_TABT)));
-}
-#endif
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector noritake_mv __initmv = {
- .vector_name = "Noritake",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = noritake_apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = EISA_DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 48,
- .device_interrupt = noritake_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = noritake_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = common_init_pci,
- .pci_map_irq = noritake_map_irq,
- .pci_swizzle = noritake_swizzle,
-};
-ALIAS_MV(noritake)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
struct alpha_machine_vector noritake_primo_mv __initmv = {
.vector_name = "Noritake-Primo",
DO_EV5_MMU,
@@ -333,4 +274,3 @@ struct alpha_machine_vector noritake_primo_mv __initmv = {
.pci_swizzle = noritake_swizzle,
};
ALIAS_MV(noritake_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
deleted file mode 100644
index c28a6ae1d989..000000000000
--- a/arch/alpha/kernel/sys_sio.c
+++ /dev/null
@@ -1,486 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/alpha/kernel/sys_sio.c
- *
- * Copyright (C) 1995 David A Rusling
- * Copyright (C) 1996 Jay A Estabrook
- * Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code for all boards that route the PCI interrupts through the SIO
- * PCI/ISA bridge. This includes Noname (AXPpci33), Multia (UDB),
- * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-
-#include <asm/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-/* Save LCA configuration data as the console had it set up. */
-struct
-{
- unsigned int orig_route_tab; /* for SAVE/RESTORE */
-} saved_config __attribute((common));
-#endif
-
-
-static void __init
-sio_init_irq(void)
-{
- if (alpha_using_srm)
- alpha_mv.device_interrupt = srm_device_interrupt;
-
- init_i8259a_irqs();
- common_init_isa_dma();
-}
-
-static inline void __init
-alphabook1_init_arch(void)
-{
-#ifdef CONFIG_VGA_CONSOLE
- /* The AlphaBook1 has LCD video fixed at 800x600,
- 37 rows and 100 cols. */
- vgacon_screen_info.orig_y = 37;
- vgacon_screen_info.orig_video_cols = 100;
- vgacon_screen_info.orig_video_lines = 37;
-#endif
-
- lca_init_arch();
-}
-
-
-/*
- * sio_route_tab selects irq routing in PCI/ISA bridge so that:
- * PIRQ0 -> irq 15
- * PIRQ1 -> irq 9
- * PIRQ2 -> irq 10
- * PIRQ3 -> irq 11
- *
- * This probably ought to be configurable via MILO. For
- * example, sound boards seem to like using IRQ 9.
- *
- * This is NOT how we should do it. PIRQ0-X should have
- * their own IRQs, the way intel uses the IO-APIC IRQs.
- */
-
-static void __init
-sio_pci_route(void)
-{
- unsigned int orig_route_tab;
-
- /* First, ALWAYS read and print the original setting. */
- pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- &orig_route_tab);
- printk("%s: PIRQ original 0x%x new 0x%x\n", __func__,
- orig_route_tab, alpha_mv.sys.sio.route_tab);
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
- saved_config.orig_route_tab = orig_route_tab;
-#endif
-
- /* Now override with desired setting. */
- pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- alpha_mv.sys.sio.route_tab);
-}
-
-static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev)
-{
- if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
- (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
- return false;
-
- return true;
-}
-
-static unsigned int __init
-sio_collect_irq_levels(void)
-{
- unsigned int level_bits = 0;
- struct pci_dev *dev = NULL;
-
- /* Iterate through the devices, collecting IRQ levels. */
- for_each_pci_dev(dev) {
- if (!sio_pci_dev_irq_needs_level(dev))
- continue;
-
- if (dev->irq)
- level_bits |= (1 << dev->irq);
- }
- return level_bits;
-}
-
-static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset)
-{
- unsigned int old_level_bits;
-
- /*
- * Now, make all PCI interrupts level sensitive. Notice:
- * these registers must be accessed byte-wise. inw()/outw()
- * don't work.
- *
- * Make sure to turn off any level bits set for IRQs 9,10,11,15,
- * so that the only bits getting set are for devices actually found.
- * Note that we do preserve the remainder of the bits, which we hope
- * will be set correctly by ARC/SRM.
- *
- * Note: we at least preserve any level-set bits on AlphaBook1
- */
- old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
-
- if (reset)
- old_level_bits &= 0x71ff;
-
- level_bits |= old_level_bits;
-
- outb((level_bits >> 0) & 0xff, 0x4d0);
- outb((level_bits >> 8) & 0xff, 0x4d1);
-}
-
-static inline void
-sio_fixup_irq_levels(unsigned int level_bits)
-{
- __sio_fixup_irq_levels(level_bits, true);
-}
-
-static inline int
-noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- /*
- * The Noname board has 5 PCI slots with each of the 4
- * interrupt pins routed to different pins on the PCI/ISA
- * bridge (PIRQ0-PIRQ3). The table below is based on
- * information available at:
- *
- * http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
- *
- * I have no information on the Avanti interrupt routing, but
- * the routing seems to be identical to the Noname except
- * that the Avanti has an additional slot whose routing I'm
- * unsure of.
- *
- * pirq_tab[0] is a fake entry to deal with old PCI boards
- * that have the interrupt pin number hardwired to 0 (meaning
- * that they use the default INTA line, if they are interrupt
- * driven at all).
- */
- static char irq_tab[][5] = {
- /*INT A B C D */
- { 3, 3, 3, 3, 3}, /* idsel 6 (53c810) */
- {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */
- { 2, 2, -1, -1, -1}, /* idsel 8 (Hack: slot closest ISA) */
- {-1, -1, -1, -1, -1}, /* idsel 9 (unused) */
- {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
- { 0, 0, 2, 1, 0}, /* idsel 11 KN25_PCI_SLOT0 */
- { 1, 1, 0, 2, 1}, /* idsel 12 KN25_PCI_SLOT1 */
- { 2, 2, 1, 0, 2}, /* idsel 13 KN25_PCI_SLOT2 */
- { 0, 0, 0, 0, 0}, /* idsel 14 AS255 TULIP */
- };
- const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
- int irq = COMMON_TABLE_LOOKUP, tmp;
- tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-
- irq = irq >= 0 ? tmp : -1;
-
- /* Fixup IRQ level if an actual IRQ mapping is detected */
- if (sio_pci_dev_irq_needs_level(dev) && irq >= 0)
- __sio_fixup_irq_levels(1 << irq, false);
-
- return irq;
-}
-
-static inline int
-p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- static char irq_tab[][5] = {
- /*INT A B C D */
- { 0, 0, -1, -1, -1}, /* idsel 6 (53c810) */
- {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */
- { 1, 1, 2, 3, 0}, /* idsel 8 (slot A) */
- { 2, 2, 3, 0, 1}, /* idsel 9 (slot B) */
- {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
- {-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
- { 3, 3, -1, -1, -1}, /* idsel 12 (CMD0646) */
- };
- const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
- int irq = COMMON_TABLE_LOOKUP, tmp;
- tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
- return irq >= 0 ? tmp : -1;
-}
-
-static inline void __init
-noname_init_pci(void)
-{
- common_init_pci();
- sio_pci_route();
- sio_fixup_irq_levels(sio_collect_irq_levels());
-
- if (pc873xx_probe() == -1) {
- printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
- } else {
- printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
- pc873xx_get_model(), pc873xx_get_base());
-
- /* Enabling things in the Super IO chip doesn't actually
- * configure and enable things, the legacy drivers still
- * need to do the actual configuration and enabling.
- * This only unblocks them.
- */
-
-#if !defined(CONFIG_ALPHA_AVANTI)
- /* Don't bother on the Avanti family.
- * None of them had on-board IDE.
- */
- pc873xx_enable_ide();
-#endif
- pc873xx_enable_epp19();
- }
-}
-
-static inline void __init
-alphabook1_init_pci(void)
-{
- struct pci_dev *dev;
- unsigned char orig, config;
-
- common_init_pci();
- sio_pci_route();
-
- /*
- * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
- * is sensitive to PCI bus bursts, so we must DISABLE
- * burst mode for the NCR 8xx SCSI... :-(
- *
- * Note that the NCR810 SCSI driver must preserve the
- * setting of the bit in order for this to work. At the
- * moment (2.0.29), ncr53c8xx.c does NOT do this, but
- * 53c7,8xx.c DOES.
- */
-
- dev = NULL;
- while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
- if (dev->device == PCI_DEVICE_ID_NCR_53C810
- || dev->device == PCI_DEVICE_ID_NCR_53C815
- || dev->device == PCI_DEVICE_ID_NCR_53C820
- || dev->device == PCI_DEVICE_ID_NCR_53C825) {
- unsigned long io_port;
- unsigned char ctest4;
-
- io_port = dev->resource[0].start;
- ctest4 = inb(io_port+0x21);
- if (!(ctest4 & 0x80)) {
- printk("AlphaBook1 NCR init: setting"
- " burst disable\n");
- outb(ctest4 | 0x80, io_port+0x21);
- }
- }
- }
-
- /* Do not set *ANY* level triggers for AlphaBook1. */
- sio_fixup_irq_levels(0);
-
- /* Make sure that register PR1 indicates 1Mb mem */
- outb(0x0f, 0x3ce); orig = inb(0x3cf); /* read PR5 */
- outb(0x0f, 0x3ce); outb(0x05, 0x3cf); /* unlock PR0-4 */
- outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
- if ((config & 0xc0) != 0xc0) {
- printk("AlphaBook1 VGA init: setting 1Mb memory\n");
- config |= 0xc0;
- outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
- }
- outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
-}
-
-static void
-sio_kill_arch(int mode)
-{
-#if defined(ALPHA_RESTORE_SRM_SETUP)
- /* Since we cannot read the PCI DMA Window CSRs, we
- * cannot restore them here.
- *
- * However, we CAN read the PIRQ route register, so restore it
- * now...
- */
- pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
- saved_config.orig_route_tab);
-#endif
-}
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
-struct alpha_machine_vector alphabook1_mv __initmv = {
- .vector_name = "AlphaBook1",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = isa_device_interrupt,
-
- .init_arch = alphabook1_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = alphabook1_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- /* NCR810 SCSI is 14, PCMCIA controller is 15. */
- .route_tab = 0x0e0f0a0a,
- }}
-};
-ALIAS_MV(alphabook1)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI_CH)
-struct alpha_machine_vector avanti_mv __initmv = {
- .vector_name = "Avanti",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = isa_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- .route_tab = 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
- }}
-};
-ALIAS_MV(avanti)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME_CH)
-struct alpha_machine_vector noname_mv __initmv = {
- .vector_name = "Noname",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = srm_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- /* For UDB, the only available PCI slot must not map to IRQ 9,
- since that's the builtin MSS sound chip. That PCI slot
- will map to PIRQ1 (for INTA at least), so we give it IRQ 15
- instead.
-
- Unfortunately we have to do this for NONAME as well, since
- they are co-indicated when the platform type "Noname" is
- selected... :-( */
-
- .route_tab = 0x0b0a0f0d,
- }}
-};
-ALIAS_MV(noname)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
-struct alpha_machine_vector p2k_mv __initmv = {
- .vector_name = "Platform2000",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_LCA_IO,
- .machine_check = lca_machine_check,
- .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = srm_device_interrupt,
-
- .init_arch = lca_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = p2k_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- .route_tab = 0x0b0a090f,
- }}
-};
-ALIAS_MV(p2k)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
-struct alpha_machine_vector xl_mv __initmv = {
- .vector_name = "XL",
- DO_EV4_MMU,
- DO_DEFAULT_RTC,
- DO_APECS_IO,
- .machine_check = apecs_machine_check,
- .max_isa_dma_address = ALPHA_XL_MAX_ISA_DMA_ADDRESS,
- .min_io_address = DEFAULT_IO_BASE,
- .min_mem_address = XL_DEFAULT_MEM_BASE,
-
- .nr_irqs = 16,
- .device_interrupt = isa_device_interrupt,
-
- .init_arch = apecs_init_arch,
- .init_irq = sio_init_irq,
- .init_rtc = common_init_rtc,
- .init_pci = noname_init_pci,
- .kill_arch = sio_kill_arch,
- .pci_map_irq = noname_map_irq,
- .pci_swizzle = common_swizzle,
-
- .sys = { .sio = {
- .route_tab = 0x0b0a090f,
- }}
-};
-ALIAS_MV(xl)
-#endif
--
2.39.2
From: Arnd Bergmann <[email protected]>
All EV4 machines are already gone, and the remaining EV5 based machines
all support the slightly more modern EV56 generation as well.
Debian only supports EV56 and later.
Drop both of these and build kernels optimized for EV56 and higher
when the "generic" options is selected, tuning for an out-of-order
EV6 pipeline, same as Debian userspace.
Since this was the only supported architecture without 8-bit and
16-bit stores, common kernel code no longer has to worry about
aligning struct members, and existing workarounds from the block
and tty layers can be removed.
The alpha memory management code no longer needs an abstraction
for the differences between EV4 and EV5+.
Link: https://lists.debian.org/debian-alpha/2023/05/msg00009.html
Signed-off-by: Arnd Bergmann <[email protected]>
---
arch/alpha/Kconfig | 21 +------
arch/alpha/Makefile | 8 +--
arch/alpha/include/asm/elf.h | 4 +-
arch/alpha/include/asm/machvec.h | 9 ---
arch/alpha/include/asm/mmu_context.h | 45 +--------------
arch/alpha/include/asm/special_insns.h | 5 +-
arch/alpha/include/asm/tlbflush.h | 41 +------------
arch/alpha/include/asm/uaccess.h | 80 --------------------------
arch/alpha/include/uapi/asm/compiler.h | 18 ------
arch/alpha/kernel/machvec_impl.h | 25 +-------
arch/alpha/kernel/traps.c | 31 ----------
include/linux/blk_types.h | 6 --
include/linux/tty.h | 14 ++---
13 files changed, 19 insertions(+), 288 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 7987bb548652..50ff06d5b799 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -240,29 +240,14 @@ config ISA_DMA_API
bool
default y
-config ALPHA_EV4
- bool
-
-config ALPHA_EV5
- bool
- default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-
config ALPHA_CIA
bool
depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR
default y
config ALPHA_EV56
- bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
- default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
-
-config ALPHA_EV56
- prompt "EV56 CPU (speed >= 333MHz)?"
- depends on ALPHA_NORITAKE || ALPHA_MIKASA
-
-config ALPHA_EV56
- prompt "EV56 CPU (speed >= 400MHz)?"
- depends on ALPHA_RAWHIDE
+ bool
+ default y if ALPHA_ALCOR || ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_RAWHIDE || ALPHA_SABLE
config ALPHA_T2
bool
@@ -403,7 +388,7 @@ config ARCH_SPARSEMEM_ENABLE
config ALPHA_WTINT
bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
default y if ALPHA_QEMU
- default n if ALPHA_EV5 || ALPHA_EV56
+ default n if ALPHA_EV56
default n if !ALPHA_SRM && !ALPHA_GENERIC
default y if SMP
help
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 45158024085e..35445ff2e489 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -15,18 +15,14 @@ CHECKFLAGS += -D__alpha__
cflags-y := -pipe -mno-fp-regs -ffixed-8
cflags-y += $(call cc-option, -fno-jump-tables)
-cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
-cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5
cpuflags-$(CONFIG_ALPHA_EV56) := -mcpu=ev56
cpuflags-$(CONFIG_ALPHA_POLARIS) := -mcpu=pca56
cpuflags-$(CONFIG_ALPHA_SX164) := -mcpu=pca56
cpuflags-$(CONFIG_ALPHA_EV6) := -mcpu=ev6
cpuflags-$(CONFIG_ALPHA_EV67) := -mcpu=ev67
# If GENERIC, make sure to turn off any instruction set extensions that
-# the host compiler might have on by default. Given that EV4 and EV5
-# have the same instruction set, prefer EV5 because an EV5 schedule is
-# more likely to keep an EV4 processor busy than vice-versa.
-cpuflags-$(CONFIG_ALPHA_GENERIC) := -mcpu=ev5
+# the host compiler might have on by default.
+cpuflags-$(CONFIG_ALPHA_GENERIC) := -mcpu=ev56 -mtune=ev6
cflags-y += $(cpuflags-y)
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index e6da23f1da83..4d7c46f50382 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -133,9 +133,7 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
#define ELF_PLATFORM \
({ \
enum implver_enum i_ = implver(); \
- ( i_ == IMPLVER_EV4 ? "ev4" \
- : i_ == IMPLVER_EV5 \
- ? (amask(AMASK_BWX) ? "ev5" : "ev56") \
+ ( i_ == IMPLVER_EV5 ? "ev56" \
: amask (AMASK_CIX) ? "ev6" : "ev67"); \
})
diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h
index 8623f995d34c..490fc880bb3f 100644
--- a/arch/alpha/include/asm/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
@@ -72,15 +72,6 @@ struct alpha_machine_vector
int (*mv_is_ioaddr)(unsigned long);
int (*mv_is_mmio)(const volatile void __iomem *);
- void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *,
- struct task_struct *);
- void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *);
-
- void (*mv_flush_tlb_current)(struct mm_struct *);
- void (*mv_flush_tlb_current_page)(struct mm_struct * mm,
- struct vm_area_struct *vma,
- unsigned long addr);
-
void (*update_irq_hw)(unsigned long, unsigned long, int);
void (*ack_irq)(unsigned long);
void (*device_interrupt)(unsigned long vector);
diff --git a/arch/alpha/include/asm/mmu_context.h b/arch/alpha/include/asm/mmu_context.h
index 29a3e3a1f02b..eee8fe836a59 100644
--- a/arch/alpha/include/asm/mmu_context.h
+++ b/arch/alpha/include/asm/mmu_context.h
@@ -71,9 +71,7 @@ __reload_thread(struct pcb_struct *pcb)
#ifdef CONFIG_ALPHA_GENERIC
# define MAX_ASN (alpha_mv.max_asn)
#else
-# ifdef CONFIG_ALPHA_EV4
-# define MAX_ASN EV4_MAX_ASN
-# elif defined(CONFIG_ALPHA_EV5)
+# if defined(CONFIG_ALPHA_EV56)
# define MAX_ASN EV5_MAX_ASN
# else
# define MAX_ASN EV6_MAX_ASN
@@ -162,26 +160,6 @@ ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK;
}
-__EXTERN_INLINE void
-ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
- struct task_struct *next)
-{
- /* As described, ASN's are broken for TLB usage. But we can
- optimize for switching between threads -- if the mm is
- unchanged from current we needn't flush. */
- /* ??? May not be needed because EV4 PALcode recognizes that
- ASN's are broken and does a tbiap itself on swpctx, under
- the "Must set ASN or flush" rule. At least this is true
- for a 1992 SRM, reports Joseph Martin ([email protected]).
- I'm going to leave this here anyway, just to Be Sure. -- r~ */
- if (prev_mm != next_mm)
- tbiap();
-
- /* Do continue to allocate ASNs, because we can still use them
- to avoid flushing the icache. */
- ev5_switch_mm(prev_mm, next_mm, next);
-}
-
extern void __load_new_mm_context(struct mm_struct *);
asmlinkage void do_page_fault(unsigned long address, unsigned long mmcsr,
long cause, struct pt_regs *regs);
@@ -209,25 +187,8 @@ ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
__load_new_mm_context(next_mm);
}
-__EXTERN_INLINE void
-ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
- __load_new_mm_context(next_mm);
- tbiap();
-}
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define switch_mm(a,b,c) alpha_mv.mv_switch_mm((a),(b),(c))
-# define activate_mm(x,y) alpha_mv.mv_activate_mm((x),(y))
-#else
-# ifdef CONFIG_ALPHA_EV4
-# define switch_mm(a,b,c) ev4_switch_mm((a),(b),(c))
-# define activate_mm(x,y) ev4_activate_mm((x),(y))
-# else
-# define switch_mm(a,b,c) ev5_switch_mm((a),(b),(c))
-# define activate_mm(x,y) ev5_activate_mm((x),(y))
-# endif
-#endif
+#define switch_mm(a,b,c) ev5_switch_mm((a),(b),(c))
+#define activate_mm(x,y) ev5_activate_mm((x),(y))
#define init_new_context init_new_context
static inline int
diff --git a/arch/alpha/include/asm/special_insns.h b/arch/alpha/include/asm/special_insns.h
index ca2c5c30b22e..798d0bdb11f9 100644
--- a/arch/alpha/include/asm/special_insns.h
+++ b/arch/alpha/include/asm/special_insns.h
@@ -15,10 +15,7 @@ enum implver_enum {
(enum implver_enum) __implver; })
#else
/* Try to eliminate some dead code. */
-#ifdef CONFIG_ALPHA_EV4
-#define implver() IMPLVER_EV4
-#endif
-#ifdef CONFIG_ALPHA_EV5
+#ifdef CONFIG_ALPHA_EV56
#define implver() IMPLVER_EV5
#endif
#if defined(CONFIG_ALPHA_EV6)
diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h
index 94dc37cf873a..02ccac5c5916 100644
--- a/arch/alpha/include/asm/tlbflush.h
+++ b/arch/alpha/include/asm/tlbflush.h
@@ -14,39 +14,12 @@
extern void __load_new_mm_context(struct mm_struct *);
-/* Use a few helper functions to hide the ugly broken ASN
- numbers on early Alphas (ev4 and ev45). */
-
-__EXTERN_INLINE void
-ev4_flush_tlb_current(struct mm_struct *mm)
-{
- __load_new_mm_context(mm);
- tbiap();
-}
-
__EXTERN_INLINE void
ev5_flush_tlb_current(struct mm_struct *mm)
{
__load_new_mm_context(mm);
}
-/* Flush just one page in the current TLB set. We need to be very
- careful about the icache here, there is no way to invalidate a
- specific icache page. */
-
-__EXTERN_INLINE void
-ev4_flush_tlb_current_page(struct mm_struct * mm,
- struct vm_area_struct *vma,
- unsigned long addr)
-{
- int tbi_flag = 2;
- if (vma->vm_flags & VM_EXEC) {
- __load_new_mm_context(mm);
- tbi_flag = 3;
- }
- tbi(tbi_flag, addr);
-}
-
__EXTERN_INLINE void
ev5_flush_tlb_current_page(struct mm_struct * mm,
struct vm_area_struct *vma,
@@ -59,18 +32,8 @@ ev5_flush_tlb_current_page(struct mm_struct * mm,
}
-#ifdef CONFIG_ALPHA_GENERIC
-# define flush_tlb_current alpha_mv.mv_flush_tlb_current
-# define flush_tlb_current_page alpha_mv.mv_flush_tlb_current_page
-#else
-# ifdef CONFIG_ALPHA_EV4
-# define flush_tlb_current ev4_flush_tlb_current
-# define flush_tlb_current_page ev4_flush_tlb_current_page
-# else
-# define flush_tlb_current ev5_flush_tlb_current
-# define flush_tlb_current_page ev5_flush_tlb_current_page
-# endif
-#endif
+#define flush_tlb_current ev5_flush_tlb_current
+#define flush_tlb_current_page ev5_flush_tlb_current_page
#ifdef __MMU_EXTERN_INLINE
#undef __EXTERN_INLINE
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index c32c2584c0b7..ef295cbb797c 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -96,9 +96,6 @@ struct __large_struct { unsigned long buf[100]; };
: "=r"(__gu_val), "=r"(__gu_err) \
: "m"(__m(addr)), "1"(__gu_err))
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves. */
-
#define __get_user_16(addr) \
__asm__("1: ldwu %0,%2\n" \
"2:\n" \
@@ -112,33 +109,6 @@ struct __large_struct { unsigned long buf[100]; };
EXC(1b,2b,%0,%1) \
: "=r"(__gu_val), "=r"(__gu_err) \
: "m"(__m(addr)), "1"(__gu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
- load, so we have to do a general unaligned operation. */
-
-#define __get_user_16(addr) \
-{ \
- long __gu_tmp; \
- __asm__("1: ldq_u %0,0(%3)\n" \
- "2: ldq_u %1,1(%3)\n" \
- " extwl %0,%3,%0\n" \
- " extwh %1,%3,%1\n" \
- " or %0,%1,%0\n" \
- "3:\n" \
- EXC(1b,3b,%0,%2) \
- EXC(2b,3b,%0,%2) \
- : "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err) \
- : "r"(addr), "2"(__gu_err)); \
-}
-
-#define __get_user_8(addr) \
- __asm__("1: ldq_u %0,0(%2)\n" \
- " extbl %0,%2,%0\n" \
- "2:\n" \
- EXC(1b,2b,%0,%1) \
- : "=&r"(__gu_val), "=r"(__gu_err) \
- : "r"(addr), "1"(__gu_err))
-#endif
extern void __put_user_unknown(void);
@@ -192,9 +162,6 @@ __asm__ __volatile__("1: stl %r2,%1\n" \
: "=r"(__pu_err) \
: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves. */
-
#define __put_user_16(x, addr) \
__asm__ __volatile__("1: stw %r2,%1\n" \
"2:\n" \
@@ -208,53 +175,6 @@ __asm__ __volatile__("1: stb %r2,%1\n" \
EXC(1b,2b,$31,%0) \
: "=r"(__pu_err) \
: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
- write, so we have to do a general unaligned operation. */
-
-#define __put_user_16(x, addr) \
-{ \
- long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4; \
- __asm__ __volatile__( \
- "1: ldq_u %2,1(%5)\n" \
- "2: ldq_u %1,0(%5)\n" \
- " inswh %6,%5,%4\n" \
- " inswl %6,%5,%3\n" \
- " mskwh %2,%5,%2\n" \
- " mskwl %1,%5,%1\n" \
- " or %2,%4,%2\n" \
- " or %1,%3,%1\n" \
- "3: stq_u %2,1(%5)\n" \
- "4: stq_u %1,0(%5)\n" \
- "5:\n" \
- EXC(1b,5b,$31,%0) \
- EXC(2b,5b,$31,%0) \
- EXC(3b,5b,$31,%0) \
- EXC(4b,5b,$31,%0) \
- : "=r"(__pu_err), "=&r"(__pu_tmp1), \
- "=&r"(__pu_tmp2), "=&r"(__pu_tmp3), \
- "=&r"(__pu_tmp4) \
- : "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
-}
-
-#define __put_user_8(x, addr) \
-{ \
- long __pu_tmp1, __pu_tmp2; \
- __asm__ __volatile__( \
- "1: ldq_u %1,0(%4)\n" \
- " insbl %3,%4,%2\n" \
- " mskbl %1,%4,%1\n" \
- " or %1,%2,%1\n" \
- "2: stq_u %1,0(%4)\n" \
- "3:\n" \
- EXC(1b,3b,$31,%0) \
- EXC(2b,3b,$31,%0) \
- : "=r"(__pu_err), \
- "=&r"(__pu_tmp1), "=&r"(__pu_tmp2) \
- : "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
-}
-#endif
-
/*
* Complex access routines
diff --git a/arch/alpha/include/uapi/asm/compiler.h b/arch/alpha/include/uapi/asm/compiler.h
index 0e00c0e13374..8c03740966b4 100644
--- a/arch/alpha/include/uapi/asm/compiler.h
+++ b/arch/alpha/include/uapi/asm/compiler.h
@@ -95,24 +95,6 @@
#define __kernel_ldwu(mem) (mem)
#define __kernel_stb(val,mem) ((mem) = (val))
#define __kernel_stw(val,mem) ((mem) = (val))
-#else
-#define __kernel_ldbu(mem) \
- ({ unsigned char __kir; \
- __asm__(".arch ev56; \
- ldbu %0,%1" : "=r"(__kir) : "m"(mem)); \
- __kir; })
-#define __kernel_ldwu(mem) \
- ({ unsigned short __kir; \
- __asm__(".arch ev56; \
- ldwu %0,%1" : "=r"(__kir) : "m"(mem)); \
- __kir; })
-#define __kernel_stb(val,mem) \
- __asm__(".arch ev56; \
- stb %1,%0" : "=m"(mem) : "r"(val))
-#define __kernel_stw(val,mem) \
- __asm__(".arch ev56; \
- stw %1,%0" : "=m"(mem) : "r"(val))
#endif
-
#endif /* _UAPI__ALPHA_COMPILER_H */
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
index c2ebcb39e589..129ae36b8e6d 100644
--- a/arch/alpha/kernel/machvec_impl.h
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -44,33 +44,14 @@
#define DO_DEFAULT_RTC .rtc_port = 0x70
-#define DO_EV4_MMU \
- .max_asn = EV4_MAX_ASN, \
- .mv_switch_mm = ev4_switch_mm, \
- .mv_activate_mm = ev4_activate_mm, \
- .mv_flush_tlb_current = ev4_flush_tlb_current, \
- .mv_flush_tlb_current_page = ev4_flush_tlb_current_page
-
#define DO_EV5_MMU \
- .max_asn = EV5_MAX_ASN, \
- .mv_switch_mm = ev5_switch_mm, \
- .mv_activate_mm = ev5_activate_mm, \
- .mv_flush_tlb_current = ev5_flush_tlb_current, \
- .mv_flush_tlb_current_page = ev5_flush_tlb_current_page
+ .max_asn = EV5_MAX_ASN \
#define DO_EV6_MMU \
- .max_asn = EV6_MAX_ASN, \
- .mv_switch_mm = ev5_switch_mm, \
- .mv_activate_mm = ev5_activate_mm, \
- .mv_flush_tlb_current = ev5_flush_tlb_current, \
- .mv_flush_tlb_current_page = ev5_flush_tlb_current_page
+ .max_asn = EV6_MAX_ASN \
#define DO_EV7_MMU \
- .max_asn = EV6_MAX_ASN, \
- .mv_switch_mm = ev5_switch_mm, \
- .mv_activate_mm = ev5_activate_mm, \
- .mv_flush_tlb_current = ev5_flush_tlb_current, \
- .mv_flush_tlb_current_page = ev5_flush_tlb_current_page
+ .max_asn = EV6_MAX_ASN \
#define IO_LITE(UP,low) \
.hae_register = (unsigned long *) CAT(UP,_HAE_ADDRESS), \
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index a9a8e9ab0f52..6afae65e9a8b 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -320,32 +320,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
return;
case 4: /* opDEC */
- if (implver() == IMPLVER_EV4) {
- long si_code;
-
- /* The some versions of SRM do not handle
- the opDEC properly - they return the PC of the
- opDEC fault, not the instruction after as the
- Alpha architecture requires. Here we fix it up.
- We do this by intentionally causing an opDEC
- fault during the boot sequence and testing if
- we get the correct PC. If not, we set a flag
- to correct it every time through. */
- regs->pc += opDEC_fix;
-
- /* EV4 does not implement anything except normal
- rounding. Everything else will come here as
- an illegal instruction. Emulate them. */
- si_code = alpha_fp_emul(regs->pc - 4);
- if (si_code == 0)
- return;
- if (si_code > 0) {
- send_sig_fault_trapno(SIGFPE, si_code,
- (void __user *) regs->pc,
- 0, current);
- return;
- }
- }
break;
case 5: /* illoc */
@@ -946,11 +920,6 @@ trap_init(void)
register unsigned long gptr __asm__("$29");
wrkgp(gptr);
- /* Hack for Multia (UDB) and JENSEN: some of their SRMs have
- a bug in the handling of the opDEC fault. Fix it up if so. */
- if (implver() == IMPLVER_EV4)
- opDEC_check();
-
wrent(entArith, 1);
wrent(entMM, 2);
wrent(entIF, 3);
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index cb1526ec44b5..c3e098b21c16 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -88,15 +88,9 @@ struct block_device {
/*
* Block error status values. See block/blk-core:blk_errors for the details.
- * Alpha cannot write a byte atomically, so we need to use 32-bit value.
*/
-#if defined(CONFIG_ALPHA) && !defined(__alpha_bwx__)
-typedef u32 __bitwise blk_status_t;
-typedef u32 blk_short_t;
-#else
typedef u8 __bitwise blk_status_t;
typedef u16 blk_short_t;
-#endif
#define BLK_STS_OK 0
#define BLK_STS_NOTSUPP ((__force blk_status_t)1)
#define BLK_STS_TIMEOUT ((__force blk_status_t)2)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 2b2e6f0a54d6..2372f9357240 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -145,15 +145,12 @@ struct tty_operations;
* @count: count of open processes, reaching zero cancels all the work for
* this tty and drops a @kref too (but does not free this tty)
* @winsize: size of the terminal "window" (cf. @winsize_mutex)
- * @flow: flow settings grouped together, see also @flow.unused
+ * @flow: flow settings grouped together
* @flow.lock: lock for @flow members
* @flow.stopped: tty stopped/started by stop_tty()/start_tty()
* @flow.tco_stopped: tty stopped/started by %TCOOFF/%TCOON ioctls (it has
* precedence over @flow.stopped)
- * @flow.unused: alignment for Alpha, so that no members other than @flow.* are
- * modified by the same 64b word store. The @flow's __aligned is
- * there for the very same reason.
- * @ctrl: control settings grouped together, see also @ctrl.unused
+ * @ctrl: control settings grouped together
* @ctrl.lock: lock for @ctrl members
* @ctrl.pgrp: process group of this tty (setpgrp(2))
* @ctrl.session: session of this tty (setsid(2)). Writes are protected by both
@@ -161,7 +158,6 @@ struct tty_operations;
* them.
* @ctrl.pktstatus: packet mode status (bitwise OR of %TIOCPKT_ constants)
* @ctrl.packet: packet mode enabled
- * @ctrl.unused: alignment for Alpha, see @flow.unused for explanation
* @hw_stopped: not controlled by the tty layer, under @driver's control for CTS
* handling
* @receive_room: bytes permitted to feed to @ldisc without any being lost
@@ -216,8 +212,7 @@ struct tty_struct {
spinlock_t lock;
bool stopped;
bool tco_stopped;
- unsigned long unused[0];
- } __aligned(sizeof(unsigned long)) flow;
+ } flow;
struct {
struct pid *pgrp;
@@ -225,8 +220,7 @@ struct tty_struct {
spinlock_t lock;
unsigned char pktstatus;
bool packet;
- unsigned long unused[0];
- } __aligned(sizeof(unsigned long)) ctrl;
+ } ctrl;
bool hw_stopped;
bool closing;
--
2.39.2
On Fri, May 3, 2024 at 4:12 AM Arnd Bergmann <[email protected]> wrote:
>
> From: Arnd Bergmann <[email protected]>
>
> I had investigated dropping support for alpha EV5 and earlier a while
> ago after noticing that this is the only supported CPU family
> in the kernel without native byte access and that Debian has already
> dropped support for this generation last year [1] after it turned
> out to be broken.
>
> This topic came up again when Paul E. McKenney noticed that
> parts of the RCU code already rely on byte access and do not
> work on alpha EV5 reliably, so I refreshed my series now for
> inclusion into the next merge window.
>
> Al Viro did another series for alpha to address all the known build
> issues. I rebased his patches without any further changes and included
> it as a baseline for my work here to avoid conflicts.
Thanks for all this. Removing support for non-BWX alphas makes a lot
of sense to me.
The whole series is
Acked-by: Matt Turner <[email protected]>
On Fri, 3 May 2024 at 01:12, Arnd Bergmann <[email protected]> wrote:
>
> From: Arnd Bergmann <[email protected]>
>
> This is one of the hackiest Alpha machines, and the only one without
> PCI support. Removing this allows cleaning up code in eise and tty
> drivers in addition to the architecture code.
Oh well, The axp150 was the machine I used originally, so it's a bit
sad to see it go.
But yeah, good riddance. The lack of byte and word operations were a
fundamental mistake and made those early alphas very painful.
The design team obviously made other technical mistakes (sw fill tlb
etc, with memory ordering being the one that never got fixed), but the
byte were the killer for any sanity both on the IO side and the code
generation side.
Linus
Hello Arnd,
On Fri, 2024-05-03 at 10:11 +0200, Arnd Bergmann wrote:
> I had investigated dropping support for alpha EV5 and earlier a while
> ago after noticing that this is the only supported CPU family
> in the kernel without native byte access and that Debian has already
> dropped support for this generation last year [1] after it turned
> out to be broken.
That's not quite correct. Support for older Alphas is not broken and
always worked when I tested it. It's just that some people wanted to
raise the baseline in order to improve code performance on newer machines
with the hope to fix some minor issues we saw on Alpha here and there.
> This topic came up again when Paul E. McKenney noticed that
> parts of the RCU code already rely on byte access and do not
> work on alpha EV5 reliably, so I refreshed my series now for
> inclusion into the next merge window.
Hrrrm? That sounds like like Paul ran tests on EV5, did he?
> Al Viro did another series for alpha to address all the known build
> issues. I rebased his patches without any further changes and included
> it as a baseline for my work here to avoid conflicts.
It's somewhat strange that Al improves code on the older machines only
to be axed by your series. I would prefer such removals to aimed at an
LTS release, if possible.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
On Fri, May 03, 2024 at 10:11:21AM +0200, Arnd Bergmann wrote:
> diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
> index 7fc72aeb7398..a9a8e9ab0f52 100644
> --- a/arch/alpha/kernel/traps.c
> +++ b/arch/alpha/kernel/traps.c
> @@ -30,39 +30,6 @@
>
> #include "proto.h"
>
> -/* Work-around for some SRMs which mishandle opDEC faults. */
> -
> -static int opDEC_fix;
> -
> -static void
> -opDEC_check(void)
> -{
> - __asm__ __volatile__ (
> - /* Load the address of... */
> - " br $16, 1f\n"
> - /* A stub instruction fault handler. Just add 4 to the
> - pc and continue. */
> - " ldq $16, 8($sp)\n"
> - " addq $16, 4, $16\n"
> - " stq $16, 8($sp)\n"
> - " call_pal %[rti]\n"
> - /* Install the instruction fault handler. */
> - "1: lda $17, 3\n"
> - " call_pal %[wrent]\n"
> - /* With that in place, the fault from the round-to-minf fp
> - insn will arrive either at the "lda 4" insn (bad) or one
> - past that (good). This places the correct fixup in %0. */
> - " lda %[fix], 0\n"
> - " cvttq/svm $f31,$f31\n"
> - " lda %[fix], 4"
> - : [fix] "=r" (opDEC_fix)
> - : [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
> - : "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
> -
> - if (opDEC_fix)
> - printk("opDEC fixup enabled.\n");
> -}
> -
That should be moved into commit that removes the caller...
On Fri, May 03, 2024 at 06:53:45PM +0200, John Paul Adrian Glaubitz wrote:
> Hello Arnd,
>
> On Fri, 2024-05-03 at 10:11 +0200, Arnd Bergmann wrote:
> > I had investigated dropping support for alpha EV5 and earlier a while
> > ago after noticing that this is the only supported CPU family
> > in the kernel without native byte access and that Debian has already
> > dropped support for this generation last year [1] after it turned
> > out to be broken.
>
> That's not quite correct. Support for older Alphas is not broken and
> always worked when I tested it. It's just that some people wanted to
> raise the baseline in order to improve code performance on newer machines
> with the hope to fix some minor issues we saw on Alpha here and there.
>
> > This topic came up again when Paul E. McKenney noticed that
> > parts of the RCU code already rely on byte access and do not
> > work on alpha EV5 reliably, so I refreshed my series now for
> > inclusion into the next merge window.
>
> Hrrrm? That sounds like like Paul ran tests on EV5, did he?
Arnd does say "noticed", not "tested". No Alpha CPUs here, and I don't
run Alpha emulators. There is only so much time in each day and only
so much budget for electricity. ;-)
For the series: Acked-by: Paul E. McKenney <[email protected]>
> > Al Viro did another series for alpha to address all the known build
> > issues. I rebased his patches without any further changes and included
> > it as a baseline for my work here to avoid conflicts.
>
> It's somewhat strange that Al improves code on the older machines only
> to be axed by your series. I would prefer such removals to aimed at an
> LTS release, if possible.
Once they are in mainline, you are within your rights to send Al's
code-improvement patches to -stable, which should get them to the LTS
releases. It might well be that Arnd was planning to do just that.
Thanx, Paul
> Adrian
>
> --
> .''`. John Paul Adrian Glaubitz
> : :' : Debian Developer
> `. `' Physicist
> `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
On Fri, May 3, 2024, at 19:00, Al Viro wrote:
>
> That should be moved into commit that removes the caller...
Fixed now, thanks!
Arnd
On Fri, May 3, 2024, at 18:06, Matt Turner wrote:
> On Fri, May 3, 2024 at 4:12 AM Arnd Bergmann <[email protected]> wrote:
>>
>> Al Viro did another series for alpha to address all the known build
>> issues. I rebased his patches without any further changes and included
>> it as a baseline for my work here to avoid conflicts.
>
> Thanks for all this. Removing support for non-BWX alphas makes a lot
> of sense to me.
>
> The whole series is
>
> Acked-by: Matt Turner <[email protected]>
Thanks!
I've pushed out the series with the additional Acks to
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git/log/?h=alpha-cleanup-6.9
and merged it into the main asm-generic branch for 6.10.
Can you give this a quick test on one of your machines to make
sure I didn't introduce a stupid regression somewhere?
Arnd
On 5/3/24 01:11, Arnd Bergmann wrote:
>
> -/* Flush just one page in the current TLB set. We need to be very
> - careful about the icache here, there is no way to invalidate a
> - specific icache page. */
> -
> -__EXTERN_INLINE void
> -ev4_flush_tlb_current_page(struct mm_struct * mm,
> - struct vm_area_struct *vma,
> - unsigned long addr)
> -{
> - int tbi_flag = 2;
> - if (vma->vm_flags & VM_EXEC) {
> - __load_new_mm_context(mm);
> - tbi_flag = 3;
> - }
> - tbi(tbi_flag, addr);
> -}
> -
> __EXTERN_INLINE void
> ev5_flush_tlb_current_page(struct mm_struct * mm,
> struct vm_area_struct *vma,
The comment being removed applied to both functions and still applies to
ev5_flush_tlb_current_page. (Thus __load_new_mm_context instead of a tbi.)
r~
On Sat, May 4, 2024, at 17:00, Richard Henderson wrote:
> On 5/3/24 01:11, Arnd Bergmann wrote:
>>
>> -/* Flush just one page in the current TLB set. We need to be very
>> - careful about the icache here, there is no way to invalidate a
>> - specific icache page. */
>> -
>> -__EXTERN_INLINE void
>> -ev4_flush_tlb_current_page(struct mm_struct * mm,
>> - struct vm_area_struct *vma,
>> - unsigned long addr)
>> -{
>> - int tbi_flag = 2;
>> - if (vma->vm_flags & VM_EXEC) {
>> - __load_new_mm_context(mm);
>> - tbi_flag = 3;
>> - }
>> - tbi(tbi_flag, addr);
>> -}
>> -
>> __EXTERN_INLINE void
>> ev5_flush_tlb_current_page(struct mm_struct * mm,
>> struct vm_area_struct *vma,
>
> The comment being removed applied to both functions and still applies to
> ev5_flush_tlb_current_page. (Thus __load_new_mm_context instead of a tbi.)
Fixed now, thanks for taking a look!
Arnd
On Mon, May 6, 2024, at 11:16, Michael Cree wrote:
> On Fri, May 03, 2024 at 10:15:10PM +0200, Arnd Bergmann wrote:
>> On Fri, May 3, 2024, at 18:06, Matt Turner wrote:
>> > On Fri, May 3, 2024 at 4:12 AM Arnd Bergmann <[email protected]> wrote:
>> >>
>> >> Al Viro did another series for alpha to address all the known build
>> >> issues. I rebased his patches without any further changes and included
>> >> it as a baseline for my work here to avoid conflicts.
>>
>> I've pushed out the series with the additional Acks to
>> https://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git/log/?h=alpha-cleanup-6.9
>> and merged it into the main asm-generic branch for 6.10.
>>
>> Can you give this a quick test on one of your machines to make
>> sure I didn't introduce a stupid regression somewhere?
>
> I built a dp264 specific kernel and its working fine on an XP1000
> (EV67 arch). Just built a generic kernel (as that's probably a more
> important test) and that is also working fine on the XP1000.
Thanks a lot for testing!
> I also built a titan specific kernel to test on an ES45 (SMP EV68
> arch) but that OOPSes early in the boot process with a kernel null
> pointer access. I suspect that has nothing to do with your patches
> as I have a recollection that I have seen that OOPS before.
Ok
> So I tried the same generic kernel that I have running on the XP1000
> but that fails to unpack at the initial boot stage (!) with:
Just to be sure: this is not a regression from my patches either,
right? I would expect that any EV6 (or later) target specific
kernel didn't change much at all from my patches, while the
generic kernel changing from -march=ev4 to -march=ev56 is
certainly meant to be different (in a good way, with smaller
size and faster execution).
Arnd
On Fri, May 03, 2024 at 10:15:10PM +0200, Arnd Bergmann wrote:
> On Fri, May 3, 2024, at 18:06, Matt Turner wrote:
> > On Fri, May 3, 2024 at 4:12 AM Arnd Bergmann <[email protected]> wrote:
> >>
> >> Al Viro did another series for alpha to address all the known build
> >> issues. I rebased his patches without any further changes and included
> >> it as a baseline for my work here to avoid conflicts.
>
> I've pushed out the series with the additional Acks to
> https://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git/log/?h=alpha-cleanup-6.9
> and merged it into the main asm-generic branch for 6.10.
>
> Can you give this a quick test on one of your machines to make
> sure I didn't introduce a stupid regression somewhere?
I built a dp264 specific kernel and its working fine on an XP1000
(EV67 arch). Just built a generic kernel (as that's probably a more
important test) and that is also working fine on the XP1000.
I also built a titan specific kernel to test on an ES45 (SMP EV68
arch) but that OOPSes early in the boot process with a kernel null
pointer access. I suspect that has nothing to do with your patches
as I have a recollection that I have seen that OOPS before. So I
tried the same generic kernel that I have running on the XP1000 but
that fails to unpack at the initial boot stage (!) with:
aboot> 9
aboot: loading uncompressed vmlinuz.test...
aboot: loading compressed vmlinuz.test...
aboot: Can't load kernel.
Memory at fffffc0000310000 - fffffc0000f45df7 (PHDR 0) is Busy (Reserved)
unzip: invalid exec header
aboot>
Cheers,
Michael.