2023-08-03 09:10:02

by Neil Armstrong

[permalink] [raw]
Subject: [PATCH v3 0/3] bluetooth: qca: enable WCN7850 support

This serie enables WCN7850 on the Qualcomm SM8550 QRD
reference platform.

The WCN7850 is close to the WCN6855 but uses different
firmware names.

Signed-off-by: Neil Armstrong <[email protected]>
---
Changes in v3:
- Rebased on next-20230803 (including WCN3988 changes)
- Dropped DT patches to be sent in a separate serie
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Convert if/else and qca_is_*() macros by switch/case to simplify adding now BT SoCs
- Add bindings reviewed-by
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Neil Armstrong (3):
dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset
bluetooth: qca: use switch case for soc type behavior
bluetooth: qca: add support for WCN7850

.../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 23 ++
drivers/bluetooth/btqca.c | 97 +++++---
drivers/bluetooth/btqca.h | 37 +--
drivers/bluetooth/hci_qca.c | 264 ++++++++++++++++-----
4 files changed, 300 insertions(+), 121 deletions(-)
---
base-commit: fb4327106e5250ee360d0d8b056c1eef7eeb9a98
change-id: 20230620-topic-sm8550-upstream-bt-dfc4305f9c14

Best regards,
--
Neil Armstrong <[email protected]>



2023-08-03 09:10:08

by Neil Armstrong

[permalink] [raw]
Subject: [PATCH v3 3/3] bluetooth: qca: add support for WCN7850

Add support for the WCN7850 Bluetooth chipset.

Tested on the SM8550 QRD platform.

Signed-off-by: Neil Armstrong <[email protected]>
---
drivers/bluetooth/btqca.c | 10 ++++++++++
drivers/bluetooth/btqca.h | 1 +
drivers/bluetooth/hci_qca.c | 31 ++++++++++++++++++++++++++++++-
3 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index e301f571e971..5a35ac4138c6 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -631,6 +631,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
snprintf(config.fwname, sizeof(config.fwname),
"qca/hpbtfw%02x.tlv", rom_ver);
break;
+ case QCA_WCN7850:
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/hmtbtfw%02x.tlv", rom_ver);
+ break;
default:
snprintf(config.fwname, sizeof(config.fwname),
"qca/rampatch_%08x.bin", soc_ver);
@@ -679,6 +683,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
snprintf(config.fwname, sizeof(config.fwname),
"qca/hpnv%02x.bin", rom_ver);
break;
+ case QCA_WCN7850:
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/hmtnv%02x.bin", rom_ver);
+ break;

default:
snprintf(config.fwname, sizeof(config.fwname),
@@ -697,6 +705,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
case QCA_QCA6390:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
err = qca_disable_soc_logging(hdev);
if (err < 0)
return err;
@@ -731,6 +740,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
case QCA_WCN3991:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
/* get fw build info */
err = qca_read_fw_build_info(hdev);
if (err < 0)
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index fe51c632d772..03bff5c0059d 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -149,6 +149,7 @@ enum qca_btsoc_type {
QCA_QCA6390,
QCA_WCN6750,
QCA_WCN6855,
+ QCA_WCN7850,
};

#if IS_ENABLED(CONFIG_BT_QCA)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 548157119b75..4b57e15f9c7a 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1357,6 +1357,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
case QCA_WCN3998:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
usleep_range(1000, 10000);
break;

@@ -1442,6 +1443,7 @@ static int qca_check_speeds(struct hci_uart *hu)
case QCA_WCN3998:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
!qca_get_speed(hu, QCA_OPER_SPEED))
return -EINVAL;
@@ -1483,6 +1485,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
case QCA_WCN3998:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
hci_uart_set_flow_control(hu, true);
break;

@@ -1516,6 +1519,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
case QCA_WCN3998:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
hci_uart_set_flow_control(hu, false);
break;

@@ -1783,6 +1787,7 @@ static int qca_power_on(struct hci_dev *hdev)
case QCA_WCN3998:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
ret = qca_regulator_init(hu);
break;

@@ -1851,6 +1856,10 @@ static int qca_setup(struct hci_uart *hu)
soc_name = "wcn6855";
break;

+ case QCA_WCN7850:
+ soc_name = "wcn7850";
+ break;
+
default:
soc_name = "ROME/QCA6390";
}
@@ -1872,6 +1881,7 @@ static int qca_setup(struct hci_uart *hu)
case QCA_WCN3998:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
hci_set_aosp_capable(hdev);

@@ -1901,6 +1911,7 @@ static int qca_setup(struct hci_uart *hu)
case QCA_WCN3998:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
break;

default:
@@ -2057,6 +2068,20 @@ static const struct qca_device_data qca_soc_data_wcn6855 __maybe_unused = {
.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
};

+static const struct qca_device_data qca_soc_data_wcn7850 __maybe_unused = {
+ .soc_type = QCA_WCN7850,
+ .vregs = (struct qca_vreg []) {
+ { "vddio", 5000 },
+ { "vddaon", 26000 },
+ { "vdddig", 126000 },
+ { "vddrfa0p8", 102000 },
+ { "vddrfa1p2", 257000 },
+ { "vddrfa1p9", 302000 },
+ },
+ .num_vregs = 6,
+ .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+};
+
static void qca_power_shutdown(struct hci_uart *hu)
{
struct qca_serdev *qcadev;
@@ -2240,6 +2265,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
case QCA_WCN3998:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
qcadev->bt_power = devm_kzalloc(&serdev->dev,
sizeof(struct qca_power),
GFP_KERNEL);
@@ -2269,7 +2295,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
GPIOD_IN);
if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
(data->soc_type == QCA_WCN6750 ||
- data->soc_type == QCA_WCN6855))
+ data->soc_type == QCA_WCN6855 ||
+ data->soc_type == QCA_WCN7850))
dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");

qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2348,6 +2375,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
case QCA_WCN3998:
case QCA_WCN6750:
case QCA_WCN6855:
+ case QCA_WCN7850:
if (power->vregs_on) {
qca_power_shutdown(&qcadev->serdev_hu);
break;
@@ -2540,6 +2568,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
{ .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
+ { .compatible = "qcom,wcn7850-bt", .data = &qca_soc_data_wcn7850},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);

--
2.34.1


2023-08-03 09:26:59

by Neil Armstrong

[permalink] [raw]
Subject: [PATCH v3 2/3] bluetooth: qca: use switch case for soc type behavior

Use switch/case to handle soc type specific behaviour,
the permit dropping the qca_is_xxx() inline functions
and maked the code clearer and easier to update for new
SoCs.

Suggested-by: Konrad Dybcio <[email protected]>
Suggested-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
---
drivers/bluetooth/btqca.c | 87 +++++++++++------
drivers/bluetooth/btqca.h | 36 -------
drivers/bluetooth/hci_qca.c | 233 ++++++++++++++++++++++++++++++++++----------
3 files changed, 236 insertions(+), 120 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 6f2187fab55f..e301f571e971 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -604,26 +604,34 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,

/* Download rampatch file */
config.type = TLV_TYPE_PATCH;
- if (soc_type == QCA_WCN3988) {
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/apbtfw%02x.tlv", rom_ver);
- } else if (qca_is_wcn399x(soc_type)) {
+ switch (soc_type) {
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
snprintf(config.fwname, sizeof(config.fwname),
"qca/crbtfw%02x.tlv", rom_ver);
- } else if (soc_type == QCA_QCA6390) {
+ break;
+ case QCA_WCN3988:
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/apbtfw%02x.tlv", rom_ver);
+ break;
+ case QCA_QCA6390:
snprintf(config.fwname, sizeof(config.fwname),
"qca/htbtfw%02x.tlv", rom_ver);
- } else if (soc_type == QCA_WCN6750) {
+ break;
+ case QCA_WCN6750:
/* Choose mbn file by default.If mbn file is not found
* then choose tlv file
*/
config.type = ELF_TYPE_PATCH;
snprintf(config.fwname, sizeof(config.fwname),
"qca/msbtfw%02x.mbn", rom_ver);
- } else if (soc_type == QCA_WCN6855) {
+ break;
+ case QCA_WCN6855:
snprintf(config.fwname, sizeof(config.fwname),
"qca/hpbtfw%02x.tlv", rom_ver);
- } else {
+ break;
+ default:
snprintf(config.fwname, sizeof(config.fwname),
"qca/rampatch_%08x.bin", soc_ver);
}
@@ -639,33 +647,44 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,

/* Download NVM configuration */
config.type = TLV_TYPE_NVM;
- if (firmware_name)
+ if (firmware_name) {
snprintf(config.fwname, sizeof(config.fwname),
"qca/%s", firmware_name);
- else if (soc_type == QCA_WCN3988)
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/apnv%02x.bin", rom_ver);
- else if (qca_is_wcn399x(soc_type)) {
- if (le32_to_cpu(ver.soc_id) == QCA_WCN3991_SOC_ID) {
+ } else {
+ switch (soc_type) {
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ if (le32_to_cpu(ver.soc_id) == QCA_WCN3991_SOC_ID) {
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/crnv%02xu.bin", rom_ver);
+ } else {
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/crnv%02x.bin", rom_ver);
+ }
+ break;
+ case QCA_WCN3988:
snprintf(config.fwname, sizeof(config.fwname),
- "qca/crnv%02xu.bin", rom_ver);
- } else {
+ "qca/apnv%02x.bin", rom_ver);
+ break;
+ case QCA_QCA6390:
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/htnv%02x.bin", rom_ver);
+ break;
+ case QCA_WCN6750:
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/msnv%02x.bin", rom_ver);
+ break;
+ case QCA_WCN6855:
+ snprintf(config.fwname, sizeof(config.fwname),
+ "qca/hpnv%02x.bin", rom_ver);
+ break;
+
+ default:
snprintf(config.fwname, sizeof(config.fwname),
- "qca/crnv%02x.bin", rom_ver);
+ "qca/nvm_%08x.bin", soc_ver);
}
}
- else if (soc_type == QCA_QCA6390)
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/htnv%02x.bin", rom_ver);
- else if (soc_type == QCA_WCN6750)
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/msnv%02x.bin", rom_ver);
- else if (soc_type == QCA_WCN6855)
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/hpnv%02x.bin", rom_ver);
- else
- snprintf(config.fwname, sizeof(config.fwname),
- "qca/nvm_%08x.bin", soc_ver);

err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
if (err < 0) {
@@ -673,16 +692,24 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
return err;
}

- if (soc_type >= QCA_WCN3991) {
+ switch (soc_type) {
+ case QCA_WCN3991:
+ case QCA_QCA6390:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
err = qca_disable_soc_logging(hdev);
if (err < 0)
return err;
+ break;
+ default:
+ break;
}

/* WCN399x and WCN6750 supports the Microsoft vendor extension with 0xFD70 as the
* VsMsftOpCode.
*/
switch (soc_type) {
+ case QCA_WCN3988:
case QCA_WCN3990:
case QCA_WCN3991:
case QCA_WCN3998:
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index fc6cf314eb0e..fe51c632d772 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -161,27 +161,6 @@ int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
enum qca_btsoc_type);
int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
-static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
-{
- switch (soc_type) {
- case QCA_WCN3988:
- case QCA_WCN3990:
- case QCA_WCN3991:
- case QCA_WCN3998:
- return true;
- default:
- return false;
- }
-}
-static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
-{
- return soc_type == QCA_WCN6750;
-}
-static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
-{
- return soc_type == QCA_WCN6855;
-}
-
#else

static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -209,21 +188,6 @@ static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
return -EOPNOTSUPP;
}

-static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
-{
- return false;
-}
-
-static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
-{
- return false;
-}
-
-static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
-{
- return false;
-}
-
static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 011822519602..548157119b75 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -607,9 +607,18 @@ static int qca_open(struct hci_uart *hu)
if (hu->serdev) {
qcadev = serdev_device_get_drvdata(hu->serdev);

- if (qca_is_wcn399x(qcadev->btsoc_type) ||
- qca_is_wcn6750(qcadev->btsoc_type))
+ switch (qcadev->btsoc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
hu->init_speed = qcadev->init_speed;
+ break;
+
+ default:
+ break;
+ }

if (qcadev->oper_speed)
hu->oper_speed = qcadev->oper_speed;
@@ -1341,12 +1350,19 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));

/* Give the controller time to process the request */
- if (qca_is_wcn399x(qca_soc_type(hu)) ||
- qca_is_wcn6750(qca_soc_type(hu)) ||
- qca_is_wcn6855(qca_soc_type(hu)))
+ switch (qca_soc_type(hu)) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
usleep_range(1000, 10000);
- else
+ break;
+
+ default:
msleep(300);
+ }

return 0;
}
@@ -1419,13 +1435,19 @@ static unsigned int qca_get_speed(struct hci_uart *hu,

static int qca_check_speeds(struct hci_uart *hu)
{
- if (qca_is_wcn399x(qca_soc_type(hu)) ||
- qca_is_wcn6750(qca_soc_type(hu)) ||
- qca_is_wcn6855(qca_soc_type(hu))) {
+ switch (qca_soc_type(hu)) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
!qca_get_speed(hu, QCA_OPER_SPEED))
return -EINVAL;
- } else {
+ break;
+
+ default:
if (!qca_get_speed(hu, QCA_INIT_SPEED) ||
!qca_get_speed(hu, QCA_OPER_SPEED))
return -EINVAL;
@@ -1454,14 +1476,28 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
/* Disable flow control for wcn3990 to deassert RTS while
* changing the baudrate of chip and host.
*/
- if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type) ||
- qca_is_wcn6855(soc_type))
+ switch (soc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
hci_uart_set_flow_control(hu, true);
+ break;

- if (soc_type == QCA_WCN3990) {
+ default:
+ break;
+ }
+
+ switch (soc_type) {
+ case QCA_WCN3990:
reinit_completion(&qca->drop_ev_comp);
set_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
+ break;
+
+ default:
+ break;
}

qca_baudrate = qca_get_baudrate_value(speed);
@@ -1473,12 +1509,22 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
host_set_baudrate(hu, speed);

error:
- if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type) ||
- qca_is_wcn6855(soc_type))
+ switch (soc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
hci_uart_set_flow_control(hu, false);
+ break;

- if (soc_type == QCA_WCN3990) {
+ default:
+ break;
+ }
+
+ switch (soc_type) {
+ case QCA_WCN3990:
/* Wait for the controller to send the vendor event
* for the baudrate change command.
*/
@@ -1490,6 +1536,10 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
}

clear_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
+ break;
+
+ default:
+ break;
}
}

@@ -1651,12 +1701,20 @@ static int qca_regulator_init(struct hci_uart *hu)
}
}

- if (qca_is_wcn399x(soc_type)) {
+ switch (soc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
/* Forcefully enable wcn399x to enter in to boot mode. */
host_set_baudrate(hu, 2400);
ret = qca_send_power_pulse(hu, false);
if (ret)
return ret;
+ break;
+
+ default:
+ break;
}

/* For wcn6750 need to enable gpio bt_en */
@@ -1673,10 +1731,18 @@ static int qca_regulator_init(struct hci_uart *hu)

qca_set_speed(hu, QCA_INIT_SPEED);

- if (qca_is_wcn399x(soc_type)) {
+ switch (soc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
ret = qca_send_power_pulse(hu, true);
if (ret)
return ret;
+ break;
+
+ default:
+ break;
}

/* Now the device is in ready state to communicate with host.
@@ -1710,11 +1776,17 @@ static int qca_power_on(struct hci_dev *hdev)
if (!hu->serdev)
return 0;

- if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type) ||
- qca_is_wcn6855(soc_type)) {
+ switch (soc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
ret = qca_regulator_init(hu);
- } else {
+ break;
+
+ default:
qcadev = serdev_device_get_drvdata(hu->serdev);
if (qcadev->bt_en) {
gpiod_set_value_cansleep(qcadev->bt_en, 1);
@@ -1748,6 +1820,7 @@ static int qca_setup(struct hci_uart *hu)
const char *firmware_name = qca_get_firmware_name(hu);
int ret;
struct qca_btsoc_version ver;
+ const char *soc_name;

ret = qca_check_speeds(hu);
if (ret)
@@ -1762,10 +1835,26 @@ static int qca_setup(struct hci_uart *hu)
*/
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);

- bt_dev_info(hdev, "setting up %s",
- qca_is_wcn399x(soc_type) ? "wcn399x" :
- (soc_type == QCA_WCN6750) ? "wcn6750" :
- (soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
+ switch (soc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ soc_name = "wcn399x";
+ break;
+
+ case QCA_WCN6750:
+ soc_name = "wcn6750";
+ break;
+
+ case QCA_WCN6855:
+ soc_name = "wcn6855";
+ break;
+
+ default:
+ soc_name = "ROME/QCA6390";
+ }
+ bt_dev_info(hdev, "setting up %s", soc_name);

qca->memdump_state = QCA_MEMDUMP_IDLE;

@@ -1776,16 +1865,22 @@ static int qca_setup(struct hci_uart *hu)

clear_bit(QCA_SSR_TRIGGERED, &qca->flags);

- if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type) ||
- qca_is_wcn6855(soc_type)) {
+ switch (soc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
hci_set_aosp_capable(hdev);

ret = qca_read_soc_version(hdev, &ver, soc_type);
if (ret)
goto out;
- } else {
+ break;
+
+ default:
qca_set_speed(hu, QCA_INIT_SPEED);
}

@@ -1799,9 +1894,16 @@ static int qca_setup(struct hci_uart *hu)
qca_baudrate = qca_get_baudrate_value(speed);
}

- if (!(qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type) ||
- qca_is_wcn6855(soc_type))) {
+ switch (soc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
+ break;
+
+ default:
/* Get QCA version information */
ret = qca_read_soc_version(hdev, &ver, soc_type);
if (ret)
@@ -1980,11 +2082,18 @@ static void qca_power_shutdown(struct hci_uart *hu)

qcadev = serdev_device_get_drvdata(hu->serdev);

- if (qca_is_wcn399x(soc_type)) {
+ switch (soc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, false);
qca_regulator_disable(qcadev);
- } else if (soc_type == QCA_WCN6750 || soc_type == QCA_WCN6855) {
+ break;
+
+ case QCA_WCN6750:
+ case QCA_WCN6855:
gpiod_set_value_cansleep(qcadev->bt_en, 0);
msleep(100);
qca_regulator_disable(qcadev);
@@ -1992,7 +2101,9 @@ static void qca_power_shutdown(struct hci_uart *hu)
sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
}
- } else if (qcadev->bt_en) {
+ break;
+
+ default:
gpiod_set_value_cansleep(qcadev->bt_en, 0);
}

@@ -2117,11 +2228,18 @@ static int qca_serdev_probe(struct serdev_device *serdev)
if (!qcadev->oper_speed)
BT_DBG("UART will pick default operating speed");

- if (data &&
- (qca_is_wcn399x(data->soc_type) ||
- qca_is_wcn6750(data->soc_type) ||
- qca_is_wcn6855(data->soc_type))) {
+ if (data)
qcadev->btsoc_type = data->soc_type;
+ else
+ qcadev->btsoc_type = QCA_ROME;
+
+ switch (qcadev->btsoc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
qcadev->bt_power = devm_kzalloc(&serdev->dev,
sizeof(struct qca_power),
GFP_KERNEL);
@@ -2165,12 +2283,9 @@ static int qca_serdev_probe(struct serdev_device *serdev)
BT_ERR("wcn3990 serdev registration failed");
return err;
}
- } else {
- if (data)
- qcadev->btsoc_type = data->soc_type;
- else
- qcadev->btsoc_type = QCA_ROME;
+ break;

+ default:
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR_OR_NULL(qcadev->bt_en)) {
@@ -2226,13 +2341,23 @@ static void qca_serdev_remove(struct serdev_device *serdev)
struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
struct qca_power *power = qcadev->bt_power;

- if ((qca_is_wcn399x(qcadev->btsoc_type) ||
- qca_is_wcn6750(qcadev->btsoc_type) ||
- qca_is_wcn6855(qcadev->btsoc_type)) &&
- power->vregs_on)
- qca_power_shutdown(&qcadev->serdev_hu);
- else if (qcadev->susclk)
- clk_disable_unprepare(qcadev->susclk);
+ switch (qcadev->btsoc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
+ if (power->vregs_on) {
+ qca_power_shutdown(&qcadev->serdev_hu);
+ break;
+ }
+ fallthrough;
+
+ default:
+ if (qcadev->susclk)
+ clk_disable_unprepare(qcadev->susclk);
+ }

hci_uart_unregister_device(&qcadev->serdev_hu);
}

--
2.34.1


2023-08-03 15:19:03

by Simon Horman

[permalink] [raw]
Subject: Re: [PATCH v3 2/3] bluetooth: qca: use switch case for soc type behavior

On Thu, Aug 03, 2023 at 10:45:27AM +0200, Neil Armstrong wrote:
> Use switch/case to handle soc type specific behaviour,
> the permit dropping the qca_is_xxx() inline functions
> and maked the code clearer and easier to update for new

nit: maked -> make

> SoCs.
>
> Suggested-by: Konrad Dybcio <[email protected]>
> Suggested-by: Luiz Augusto von Dentz <[email protected]>
> Signed-off-by: Neil Armstrong <[email protected]>

...

2023-08-17 10:46:30

by patchwork-bot+bluetooth

[permalink] [raw]
Subject: Re: [PATCH v3 0/3] bluetooth: qca: enable WCN7850 support

Hello:

This series was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <[email protected]>:

On Thu, 03 Aug 2023 10:45:25 +0200 you wrote:
> This serie enables WCN7850 on the Qualcomm SM8550 QRD
> reference platform.
>
> The WCN7850 is close to the WCN6855 but uses different
> firmware names.
>
> Signed-off-by: Neil Armstrong <[email protected]>
>
> [...]

Here is the summary with links:
- [v3,1/3] dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset
https://git.kernel.org/bluetooth/bluetooth-next/c/f38a5adcbd53
- [v3,2/3] bluetooth: qca: use switch case for soc type behavior
https://git.kernel.org/bluetooth/bluetooth-next/c/08292727a9fc
- [v3,3/3] bluetooth: qca: add support for WCN7850
https://git.kernel.org/bluetooth/bluetooth-next/c/ef6d9b23aa58

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html