Hi Trond,
Recently, I've upgraded my NFS server to Ubuntu 18.04LTS. Apparently
the NFS server in that release dropped support for NFS over UDP, hence I
appended ",tcp,v3" to all my nfsroot kernel command line parameters.
This works fine on my arm/arm64 development boards, but causes a crash
on RBTX4927:
VFS: Mounted root (nfs filesystem) on device 0:13.
devtmpfs: mounted
Freeing prom memory: 1020k freed
Freeing unused kernel memory: 208K
This architecture does not have kernel memory protection.
Run /sbin/init as init process
do_page_fault(): sending SIGSEGV to init for invalid read access
from 57e7e414
epc = 77f9e188 in ld-2.19.so[77f9c000+22000]
ra = 77f9d91c in ld-2.19.so[77f9c000+22000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
I found similar crashes in a report from 2006, but of course the code
has changed too much to apply the solution proposed there
(https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html).
Userland is Debian 8 (the last release supporting "old" MIPS).
My kernel is based on v4.20.0-rc5, but the issue happens with v4.20-rc1,
too.
However, I noticed it works in v4.19! Hence I've bisected this, to commit
277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code by switching to using
iterators").
Dropping the ",tcp" part from the nfsroot parameter also fixes the issue.
Given RBTX4926 is little endian, just like my arm/arm64 boards, it's probably
not an endianness issue. Sparse didn't show anything suspicious before/after
the guilty commit.
Do you have a clue?
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Geert,
On Tue, 4 Dec 2018 14:53:07 +0100, Geert Uytterhoeven <[email protected]> wrote:
> I found similar crashes in a report from 2006, but of course the code
> has changed too much to apply the solution proposed there
> (https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html).
>
> Userland is Debian 8 (the last release supporting "old" MIPS).
> My kernel is based on v4.20.0-rc5, but the issue happens with v4.20-rc1,
> too.
>
> However, I noticed it works in v4.19! Hence I've bisected this, to commit
> 277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code by switching to using
> iterators").
>
> Dropping the ",tcp" part from the nfsroot parameter also fixes the issue.
>
> Given RBTX4926 is little endian, just like my arm/arm64 boards, it's probably
> not an endianness issue. Sparse didn't show anything suspicious before/after
> the guilty commit.
>
> Do you have a clue?
If it was a cache issue, disabling i-cache or d-cache completely might
help understanding the problem. I added TXx9 specific "icdisable" and
"dcdisable" kernel options for debugging long ago.
I hope these options still works correctly with recent kernel but not
sure.
Also, disabling i-cache makes your board VERY slow, of course.
---
Atsushi Nemoto
Hi Nemoto-san,
On Wed, Dec 5, 2018 at 2:11 PM Atsushi Nemoto <[email protected]> wrote:
> On Tue, 4 Dec 2018 14:53:07 +0100, Geert Uytterhoeven <[email protected]> wrote:
> > I found similar crashes in a report from 2006, but of course the code
> > has changed too much to apply the solution proposed there
> > (https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html).
> >
> > Userland is Debian 8 (the last release supporting "old" MIPS).
> > My kernel is based on v4.20.0-rc5, but the issue happens with v4.20-rc1,
> > too.
> >
> > However, I noticed it works in v4.19! Hence I've bisected this, to commit
> > 277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code by switching to using
> > iterators").
> >
> > Dropping the ",tcp" part from the nfsroot parameter also fixes the issue.
> >
> > Given RBTX4927 is little endian, just like my arm/arm64 boards, it's probably
> > not an endianness issue. Sparse didn't show anything suspicious before/after
> > the guilty commit.
> >
> > Do you have a clue?
>
> If it was a cache issue, disabling i-cache or d-cache completely might
> help understanding the problem. I added TXx9 specific "icdisable" and
> "dcdisable" kernel options for debugging long ago.
>
> I hope these options still works correctly with recent kernel but not
> sure.
>
> Also, disabling i-cache makes your board VERY slow, of course.
Thanks!
When using these options, I do see a slowdown in early boot, but the issue
is still there.
My next guess is an unaligned access not using {get,put}_unaligned(), which
doesn't seem to work on tx4927, but doesn't cause an exception neither.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Wed, 2018-12-05 at 14:41 +0100, Geert Uytterhoeven wrote:
> Hi Nemoto-san,
>
> On Wed, Dec 5, 2018 at 2:11 PM Atsushi Nemoto <[email protected]>
> wrote:
> > On Tue, 4 Dec 2018 14:53:07 +0100, Geert Uytterhoeven <
> > [email protected]> wrote:
> > > I found similar crashes in a report from 2006, but of course the
> > > code
> > > has changed too much to apply the solution proposed there
> > > (
> > > https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html
> > > ).
> > >
> > > Userland is Debian 8 (the last release supporting "old" MIPS).
> > > My kernel is based on v4.20.0-rc5, but the issue happens with
> > > v4.20-rc1,
> > > too.
> > >
> > > However, I noticed it works in v4.19! Hence I've bisected this,
> > > to commit
> > > 277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code by switching
> > > to using
> > > iterators").
> > >
> > > Dropping the ",tcp" part from the nfsroot parameter also fixes
> > > the issue.
> > >
> > > Given RBTX4927 is little endian, just like my arm/arm64 boards,
> > > it's probably
> > > not an endianness issue. Sparse didn't show anything suspicious
> > > before/after
> > > the guilty commit.
> > >
> > > Do you have a clue?
> >
> > If it was a cache issue, disabling i-cache or d-cache completely
> > might
> > help understanding the problem. I added TXx9 specific "icdisable"
> > and
> > "dcdisable" kernel options for debugging long ago.
> >
> > I hope these options still works correctly with recent kernel but
> > not
> > sure.
> >
> > Also, disabling i-cache makes your board VERY slow, of course.
>
> Thanks!
>
> When using these options, I do see a slowdown in early boot, but the
> issue
> is still there.
>
> My next guess is an unaligned access not using {get,put}_unaligned(),
> which
> doesn't seem to work on tx4927, but doesn't cause an exception
> neither.
Can you try my linux-next branch on git.linux-nfs.org? It contains a
fixes for a hang that results from the above commit.
git pull git://git.linux-nfs.org/projects/trondmy/linux-nfs.git linux-next
Cheers
Trond
--
Trond Myklebust
Linux NFS client maintainer, Hammerspace
[email protected]
Hi Trond,
On Wed, Dec 5, 2018 at 2:45 PM Trond Myklebust <[email protected]> wrote:
> On Wed, 2018-12-05 at 14:41 +0100, Geert Uytterhoeven wrote:
> > On Wed, Dec 5, 2018 at 2:11 PM Atsushi Nemoto <[email protected]>
> > wrote:
> > > On Tue, 4 Dec 2018 14:53:07 +0100, Geert Uytterhoeven <
> > > [email protected]> wrote:
> > > > I found similar crashes in a report from 2006, but of course the
> > > > code
> > > > has changed too much to apply the solution proposed there
> > > > (
> > > > https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html
> > > > ).
> > > >
> > > > Userland is Debian 8 (the last release supporting "old" MIPS).
> > > > My kernel is based on v4.20.0-rc5, but the issue happens with
> > > > v4.20-rc1,
> > > > too.
> > > >
> > > > However, I noticed it works in v4.19! Hence I've bisected this,
> > > > to commit
> > > > 277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code by switching
> > > > to using
> > > > iterators").
> > > >
> > > > Dropping the ",tcp" part from the nfsroot parameter also fixes
> > > > the issue.
> > > >
> > > > Given RBTX4927 is little endian, just like my arm/arm64 boards,
> > > > it's probably
> > > > not an endianness issue. Sparse didn't show anything suspicious
> > > > before/after
> > > > the guilty commit.
> > > >
> > > > Do you have a clue?
> > >
> > > If it was a cache issue, disabling i-cache or d-cache completely
> > > might
> > > help understanding the problem. I added TXx9 specific "icdisable"
> > > and
> > > "dcdisable" kernel options for debugging long ago.
> > >
> > > I hope these options still works correctly with recent kernel but
> > > not
> > > sure.
> > >
> > > Also, disabling i-cache makes your board VERY slow, of course.
> >
> > Thanks!
> >
> > When using these options, I do see a slowdown in early boot, but the
> > issue
> > is still there.
> >
> > My next guess is an unaligned access not using {get,put}_unaligned(),
> > which
> > doesn't seem to work on tx4927, but doesn't cause an exception
> > neither.
>
> Can you try my linux-next branch on git.linux-nfs.org? It contains a
> fixes for a hang that results from the above commit.
>
> git pull git://git.linux-nfs.org/projects/trondmy/linux-nfs.git linux-next
Thanks for the suggestion, but unfortunately it doesn't help.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Wed, 5 Dec 2018 14:41:30 +0100, Geert Uytterhoeven <[email protected]> wrote:
> When using these options, I do see a slowdown in early boot, but the issue
> is still there.
Hmm, the NIC of the board is NE2000 variants, so DMA coherency will
not be an issue anyway. So strange ...
The board has a PCI slot. If you had an legacy PCI NIC card, trying
with it might help finding the bug.
> My next guess is an unaligned access not using {get,put}_unaligned(), which
> doesn't seem to work on tx4927, but doesn't cause an exception neither.
IIRC, TX49 can raise an exception on unaligned access.
---
Atsushi Nemoto
Hi Nemoto-san,
On Fri, Dec 7, 2018 at 3:51 PM Atsushi Nemoto <[email protected]> wrote:
> On Wed, 5 Dec 2018 14:41:30 +0100, Geert Uytterhoeven <[email protected]> wrote:
> > My next guess is an unaligned access not using {get,put}_unaligned(), which
> > doesn't seem to work on tx4927, but doesn't cause an exception neither.
>
> IIRC, TX49 can raise an exception on unaligned access.
I thought so, too, but had verified that reading from an unaligned address
didn't raise an exception, but returned a corrupt value instead.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Trond,
On Wed, Dec 5, 2018 at 3:47 PM Geert Uytterhoeven <[email protected]> wrote:
> On Wed, Dec 5, 2018 at 2:45 PM Trond Myklebust <[email protected]> wrote:
> > On Wed, 2018-12-05 at 14:41 +0100, Geert Uytterhoeven wrote:
> > > On Wed, Dec 5, 2018 at 2:11 PM Atsushi Nemoto <[email protected]>
> > > wrote:
> > > > On Tue, 4 Dec 2018 14:53:07 +0100, Geert Uytterhoeven <
> > > > [email protected]> wrote:
> > > > > I found similar crashes in a report from 2006, but of course the
> > > > > code
> > > > > has changed too much to apply the solution proposed there
> > > > > (
> > > > > https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html
> > > > > ).
> > > > >
> > > > > Userland is Debian 8 (the last release supporting "old" MIPS).
> > > > > My kernel is based on v4.20.0-rc5, but the issue happens with
> > > > > v4.20-rc1,
> > > > > too.
> > > > >
> > > > > However, I noticed it works in v4.19! Hence I've bisected this,
> > > > > to commit
> > > > > 277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code by switching
> > > > > to using
> > > > > iterators").
> > > > >
> > > > > Dropping the ",tcp" part from the nfsroot parameter also fixes
> > > > > the issue.
> > > > >
> > > > > Given RBTX4927 is little endian, just like my arm/arm64 boards,
> > > > > it's probably
> > > > > not an endianness issue. Sparse didn't show anything suspicious
> > > > > before/after
> > > > > the guilty commit.
> > > > >
> > > > > Do you have a clue?
> > > >
> > > > If it was a cache issue, disabling i-cache or d-cache completely
> > > > might
> > > > help understanding the problem. I added TXx9 specific "icdisable"
> > > > and
> > > > "dcdisable" kernel options for debugging long ago.
> > > >
> > > > I hope these options still works correctly with recent kernel but
> > > > not
> > > > sure.
> > > >
> > > > Also, disabling i-cache makes your board VERY slow, of course.
> > >
> > > Thanks!
> > >
> > > When using these options, I do see a slowdown in early boot, but the
> > > issue
> > > is still there.
> > >
> > > My next guess is an unaligned access not using {get,put}_unaligned(),
> > > which
> > > doesn't seem to work on tx4927, but doesn't cause an exception
> > > neither.
> >
> > Can you try my linux-next branch on git.linux-nfs.org? It contains a
> > fixes for a hang that results from the above commit.
> >
> > git pull git://git.linux-nfs.org/projects/trondmy/linux-nfs.git linux-next
>
> Thanks for the suggestion, but unfortunately it doesn't help.
In the mean time, I tried your newer linux-next, no change.
I tried several other things:
- remove the packed attribute (why did you add that?),
- verify (at runtime) that all accesses to fraghdr, xid, and calldir
are aligned,
- enable RPC_DEBUG_DATA, nothing fishy seen at first sight.
Is anyone else seeing this on MIPS, or any other platform?
Does mounting NFS with -o nfsvers=3,tcp work on other MIPS platforms?
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Geert,
On Mon, 2018-12-17 at 15:03 +0100, Geert Uytterhoeven wrote:
> Hi Trond,
>
> On Wed, Dec 5, 2018 at 3:47 PM Geert Uytterhoeven <
> [email protected]> wrote:
> > On Wed, Dec 5, 2018 at 2:45 PM Trond Myklebust <
> > [email protected]> wrote:
> > > On Wed, 2018-12-05 at 14:41 +0100, Geert Uytterhoeven wrote:
> > > > On Wed, Dec 5, 2018 at 2:11 PM Atsushi Nemoto <
> > > > [email protected]>
> > > > wrote:
> > > > > On Tue, 4 Dec 2018 14:53:07 +0100, Geert Uytterhoeven <
> > > > > [email protected]> wrote:
> > > > > > I found similar crashes in a report from 2006, but of
> > > > > > course the
> > > > > > code
> > > > > > has changed too much to apply the solution proposed there
> > > > > > (
> > > > > > https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html
> > > > > > ).
> > > > > >
> > > > > > Userland is Debian 8 (the last release supporting "old"
> > > > > > MIPS).
> > > > > > My kernel is based on v4.20.0-rc5, but the issue happens
> > > > > > with
> > > > > > v4.20-rc1,
> > > > > > too.
> > > > > >
> > > > > > However, I noticed it works in v4.19! Hence I've bisected
> > > > > > this,
> > > > > > to commit
> > > > > > 277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code by
> > > > > > switching
> > > > > > to using
> > > > > > iterators").
> > > > > >
> > > > > > Dropping the ",tcp" part from the nfsroot parameter also
> > > > > > fixes
> > > > > > the issue.
> > > > > >
> > > > > > Given RBTX4927 is little endian, just like my arm/arm64
> > > > > > boards,
> > > > > > it's probably
> > > > > > not an endianness issue. Sparse didn't show anything
> > > > > > suspicious
> > > > > > before/after
> > > > > > the guilty commit.
> > > > > >
> > > > > > Do you have a clue?
> > > > >
> > > > > If it was a cache issue, disabling i-cache or d-cache
> > > > > completely
> > > > > might
> > > > > help understanding the problem. I added TXx9 specific
> > > > > "icdisable"
> > > > > and
> > > > > "dcdisable" kernel options for debugging long ago.
> > > > >
> > > > > I hope these options still works correctly with recent kernel
> > > > > but
> > > > > not
> > > > > sure.
> > > > >
> > > > > Also, disabling i-cache makes your board VERY slow, of
> > > > > course.
> > > >
> > > > Thanks!
> > > >
> > > > When using these options, I do see a slowdown in early boot,
> > > > but the
> > > > issue
> > > > is still there.
> > > >
> > > > My next guess is an unaligned access not using
> > > > {get,put}_unaligned(),
> > > > which
> > > > doesn't seem to work on tx4927, but doesn't cause an exception
> > > > neither.
> > >
> > > Can you try my linux-next branch on git.linux-nfs.org? It
> > > contains a
> > > fixes for a hang that results from the above commit.
> > >
> > > git pull git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
> > > linux-next
> >
> > Thanks for the suggestion, but unfortunately it doesn't help.
>
> In the mean time, I tried your newer linux-next, no change.
> I tried several other things:
> - remove the packed attribute (why did you add that?),
The packed attribute allows us to avoid a series of copy operations
when decoding the first three elements of a RPC over TCP header (which
is why they are all declared as big endian). The alternative would be
to have a 12 byte buffer there for temporary storage, and then a
duplicate set of 3 32-bit words into which we copy the buffer contents
after extracting them from the (non-blocking) socket.
> - verify (at runtime) that all accesses to fraghdr, xid, and
> calldir
> are aligned,
> - enable RPC_DEBUG_DATA, nothing fishy seen at first sight.
>
> Is anyone else seeing this on MIPS, or any other platform?
> Does mounting NFS with -o nfsvers=3,tcp work on other MIPS platforms?
I have no access to any MIPS hardware for the purposes of testing so
that would be a question for the community.
One thing that I have noticed is that unlike the old code, the bvec
'generic' code does appear to fail to call flush_dcache_page(). Could
that be causing the problem here? If so, why would that not be a
problem in the context of regular block I/O?
Cheers
Trond
--
Trond Myklebust
Linux NFS client maintainer, Hammerspace
[email protected]
Hi Trond,
(For the newly added CCs, first message was
https://lore.kernel.org/lkml/CAMuHMdVJr0PwvJg3FeTCy7vxuyY1=S1tPLHO7hPsoZX4wZ+-cQ@mail.gmail.com/)
> On Mon, Dec 17, 2018 at 3:51 PM Trond Myklebust <[email protected]> wrote:
> > On Mon, 2018-12-17 at 15:03 +0100, Geert Uytterhoeven wrote:
> > > On Wed, Dec 5, 2018 at 3:47 PM Geert Uytterhoeven <
> > > [email protected]> wrote:
> > > > On Wed, Dec 5, 2018 at 2:45 PM Trond Myklebust <
> > > > [email protected]> wrote:
> > > > > On Wed, 2018-12-05 at 14:41 +0100, Geert Uytterhoeven wrote:
> > > > > > On Wed, Dec 5, 2018 at 2:11 PM Atsushi Nemoto <
> > > > > > [email protected]>
> > > > > > wrote:
> > > > > > > On Tue, 4 Dec 2018 14:53:07 +0100, Geert Uytterhoeven <
> > > > > > > [email protected]> wrote:
> > > > > > > > I found similar crashes in a report from 2006, but of
> > > > > > > > course the
> > > > > > > > code
> > > > > > > > has changed too much to apply the solution proposed there
> > > > > > > > (
> > > > > > > > https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html
> > > > > > > > ).
> > > > > > > >
> > > > > > > > Userland is Debian 8 (the last release supporting "old"
> > > > > > > > MIPS).
> > > > > > > > My kernel is based on v4.20.0-rc5, but the issue happens
> > > > > > > > with
> > > > > > > > v4.20-rc1,
> > > > > > > > too.
> > > > > > > >
> > > > > > > > However, I noticed it works in v4.19! Hence I've bisected
> > > > > > > > this,
> > > > > > > > to commit
> > > > > > > > 277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code by
> > > > > > > > switching
> > > > > > > > to using
> > > > > > > > iterators").
> > > > > > > >
> > > > > > > > Dropping the ",tcp" part from the nfsroot parameter also
> > > > > > > > fixes
> > > > > > > > the issue.
> > > > > > > >
> > > > > > > > Given RBTX4927 is little endian, just like my arm/arm64
> > > > > > > > boards,
> > > > > > > > it's probably
> > > > > > > > not an endianness issue. Sparse didn't show anything
> > > > > > > > suspicious
> > > > > > > > before/after
> > > > > > > > the guilty commit.
> > > > > > > >
> > > > > > > > Do you have a clue?
> > > > > > >
> > > > > > > If it was a cache issue, disabling i-cache or d-cache
> > > > > > > completely
> > > > > > > might
> > > > > > > help understanding the problem. I added TXx9 specific
> > > > > > > "icdisable"
> > > > > > > and
> > > > > > > "dcdisable" kernel options for debugging long ago.
> > > > > > >
> > > > > > > I hope these options still works correctly with recent kernel
> > > > > > > but
> > > > > > > not
> > > > > > > sure.
> > > > > > >
> > > > > > > Also, disabling i-cache makes your board VERY slow, of
> > > > > > > course.
> > > > > >
> > > > > > Thanks!
> > > > > >
> > > > > > When using these options, I do see a slowdown in early boot,
> > > > > > but the
> > > > > > issue
> > > > > > is still there.
> > > > > >
> > > > > > My next guess is an unaligned access not using
> > > > > > {get,put}_unaligned(),
> > > > > > which
> > > > > > doesn't seem to work on tx4927, but doesn't cause an exception
> > > > > > neither.
> > > > >
> > > > > Can you try my linux-next branch on git.linux-nfs.org? It
> > > > > contains a
> > > > > fixes for a hang that results from the above commit.
> > > > >
> > > > > git pull git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
> > > > > linux-next
> > > >
> > > > Thanks for the suggestion, but unfortunately it doesn't help.
> > >
> > > In the mean time, I tried your newer linux-next, no change.
> > > I tried several other things:
> > > - remove the packed attribute (why did you add that?),
> >
> > The packed attribute allows us to avoid a series of copy operations
> > when decoding the first three elements of a RPC over TCP header (which
> > is why they are all declared as big endian). The alternative would be
> > to have a 12 byte buffer there for temporary storage, and then a
> > duplicate set of 3 32-bit words into which we copy the buffer contents
> > after extracting them from the (non-blocking) socket.
> >
> > > - verify (at runtime) that all accesses to fraghdr, xid, and
> > > calldir
> > > are aligned,
> > > - enable RPC_DEBUG_DATA, nothing fishy seen at first sight.
> > >
> > > Is anyone else seeing this on MIPS, or any other platform?
> > > Does mounting NFS with -o nfsvers=3,tcp work on other MIPS platforms?
> >
> > I have no access to any MIPS hardware for the purposes of testing so
> > that would be a question for the community.
> >
> > One thing that I have noticed is that unlike the old code, the bvec
> > 'generic' code does appear to fail to call flush_dcache_page(). Could
> > that be causing the problem here? If so, why would that not be a
> > problem in the context of regular block I/O?
Thanks for the hint!
It wasn't clear to me where exactly the old code called
flush_dcache_page(), but as rpcrdma_inline_fixup() calls it in between
copying to a page, and unmapping the page, I added a call to
flush_dcache_page() to all functions in lib/iov_iter.c that map a page
and copy to it, cfr. the patch below.
And suddenly NFS root over TCP is working again!
Note that I have no idea if it affects regular block I/O, as my RBTX4927
does not have block devices.
Also note that this platform does not use highmem.
So, where's the proper place to fix this?
Thanks in advance!
diff --git a/lib/iov_iter.c b/lib/iov_iter.c
index 54c248526b55fc49..5be62db33414d3f9 100644
--- a/lib/iov_iter.c
+++ b/lib/iov_iter.c
@@ -277,6 +277,7 @@ static size_t copy_page_from_iter_iovec(struct page *page, size_t offset, size_t
to += copy;
bytes -= copy;
}
+ flush_dcache_page(page);
if (likely(!bytes)) {
kunmap_atomic(kaddr);
goto done;
@@ -463,6 +464,7 @@ static void memcpy_to_page(struct page *page, size_t offset, const char *from, s
{
char *to = kmap_atomic(page);
memcpy(to + offset, from, len);
+ flush_dcache_page(page);
kunmap_atomic(to);
}
@@ -470,6 +472,7 @@ static void memzero_page(struct page *page, size_t offset, size_t len)
{
char *addr = kmap_atomic(page);
memset(addr + offset, 0, len);
+ flush_dcache_page(page);
kunmap_atomic(addr);
}
@@ -580,6 +583,7 @@ static size_t csum_and_copy_to_pipe_iter(const void *addr, size_t bytes,
char *p = kmap_atomic(pipe->bufs[idx].page);
next = csum_partial_copy_nocheck(addr, p + r, chunk, 0);
sum = csum_block_add(sum, next, off);
+ flush_dcache_page(pipe->bufs[idx].page);
kunmap_atomic(p);
i->idx = idx;
i->iov_offset = r + chunk;
@@ -628,6 +632,7 @@ static unsigned long memcpy_mcsafe_to_page(struct page *page, size_t offset,
to = kmap_atomic(page);
ret = memcpy_mcsafe(to + offset, from, len);
+ flush_dcache_page(page);
kunmap_atomic(to);
return ret;
@@ -894,6 +899,7 @@ size_t copy_page_from_iter(struct page *page, size_t offset, size_t bytes,
if (i->type & (ITER_BVEC|ITER_KVEC)) {
void *kaddr = kmap_atomic(page);
size_t wanted = _copy_from_iter(kaddr + offset, bytes, i);
+ flush_dcache_page(page);
kunmap_atomic(kaddr);
return wanted;
} else
@@ -958,6 +964,7 @@ size_t iov_iter_copy_from_user_atomic(struct page *page,
v.bv_offset, v.bv_len),
memcpy((p += v.iov_len) - v.iov_len, v.iov_base, v.iov_len)
)
+ flush_dcache_page(page);
kunmap_atomic(kaddr);
return bytes;
}
@@ -1494,6 +1501,7 @@ size_t csum_and_copy_to_iter(const void *addr, size_t bytes, __wsum *csum,
next = csum_partial_copy_nocheck((from += v.bv_len) - v.bv_len,
p + v.bv_offset,
v.bv_len, 0);
+ flush_dcache_page(v.bv_page);
kunmap_atomic(p);
sum = csum_block_add(sum, next, off);
off += v.bv_len;
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Mon, 2018-12-17 at 19:55 +0100, Geert Uytterhoeven wrote:
> Hi Trond,
>
> (For the newly added CCs, first message was
> https://lore.kernel.org/lkml/CAMuHMdVJr0PwvJg3FeTCy7vxuyY1=S1tPLHO7hPsoZX4wZ+-cQ@mail.gmail.com/)
>
> > On Mon, Dec 17, 2018 at 3:51 PM Trond Myklebust <
> > [email protected]> wrote:
> > > On Mon, 2018-12-17 at 15:03 +0100, Geert Uytterhoeven wrote:
> > > > On Wed, Dec 5, 2018 at 3:47 PM Geert Uytterhoeven <
> > > > [email protected]> wrote:
> > > > > On Wed, Dec 5, 2018 at 2:45 PM Trond Myklebust <
> > > > > [email protected]> wrote:
> > > > > > On Wed, 2018-12-05 at 14:41 +0100, Geert Uytterhoeven
> > > > > > wrote:
> > > > > > > On Wed, Dec 5, 2018 at 2:11 PM Atsushi Nemoto <
> > > > > > > [email protected]>
> > > > > > > wrote:
> > > > > > > > On Tue, 4 Dec 2018 14:53:07 +0100, Geert Uytterhoeven <
> > > > > > > > [email protected]> wrote:
> > > > > > > > > I found similar crashes in a report from 2006, but of
> > > > > > > > > course the
> > > > > > > > > code
> > > > > > > > > has changed too much to apply the solution proposed
> > > > > > > > > there
> > > > > > > > > (
> > > > > > > > > https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html
> > > > > > > > > ).
> > > > > > > > >
> > > > > > > > > Userland is Debian 8 (the last release supporting
> > > > > > > > > "old"
> > > > > > > > > MIPS).
> > > > > > > > > My kernel is based on v4.20.0-rc5, but the issue
> > > > > > > > > happens
> > > > > > > > > with
> > > > > > > > > v4.20-rc1,
> > > > > > > > > too.
> > > > > > > > >
> > > > > > > > > However, I noticed it works in v4.19! Hence I've
> > > > > > > > > bisected
> > > > > > > > > this,
> > > > > > > > > to commit
> > > > > > > > > 277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code
> > > > > > > > > by
> > > > > > > > > switching
> > > > > > > > > to using
> > > > > > > > > iterators").
> > > > > > > > >
> > > > > > > > > Dropping the ",tcp" part from the nfsroot parameter
> > > > > > > > > also
> > > > > > > > > fixes
> > > > > > > > > the issue.
> > > > > > > > >
> > > > > > > > > Given RBTX4927 is little endian, just like my
> > > > > > > > > arm/arm64
> > > > > > > > > boards,
> > > > > > > > > it's probably
> > > > > > > > > not an endianness issue. Sparse didn't show anything
> > > > > > > > > suspicious
> > > > > > > > > before/after
> > > > > > > > > the guilty commit.
> > > > > > > > >
> > > > > > > > > Do you have a clue?
> > > > > > > >
> > > > > > > > If it was a cache issue, disabling i-cache or d-cache
> > > > > > > > completely
> > > > > > > > might
> > > > > > > > help understanding the problem. I added TXx9 specific
> > > > > > > > "icdisable"
> > > > > > > > and
> > > > > > > > "dcdisable" kernel options for debugging long ago.
> > > > > > > >
> > > > > > > > I hope these options still works correctly with recent
> > > > > > > > kernel
> > > > > > > > but
> > > > > > > > not
> > > > > > > > sure.
> > > > > > > >
> > > > > > > > Also, disabling i-cache makes your board VERY slow, of
> > > > > > > > course.
> > > > > > >
> > > > > > > Thanks!
> > > > > > >
> > > > > > > When using these options, I do see a slowdown in early
> > > > > > > boot,
> > > > > > > but the
> > > > > > > issue
> > > > > > > is still there.
> > > > > > >
> > > > > > > My next guess is an unaligned access not using
> > > > > > > {get,put}_unaligned(),
> > > > > > > which
> > > > > > > doesn't seem to work on tx4927, but doesn't cause an
> > > > > > > exception
> > > > > > > neither.
> > > > > >
> > > > > > Can you try my linux-next branch on git.linux-nfs.org? It
> > > > > > contains a
> > > > > > fixes for a hang that results from the above commit.
> > > > > >
> > > > > > git pull git://git.linux-nfs.org/projects/trondmy/linux-
> > > > > > nfs.git
> > > > > > linux-next
> > > > >
> > > > > Thanks for the suggestion, but unfortunately it doesn't help.
> > > >
> > > > In the mean time, I tried your newer linux-next, no change.
> > > > I tried several other things:
> > > > - remove the packed attribute (why did you add that?),
> > >
> > > The packed attribute allows us to avoid a series of copy
> > > operations
> > > when decoding the first three elements of a RPC over TCP header
> > > (which
> > > is why they are all declared as big endian). The alternative
> > > would be
> > > to have a 12 byte buffer there for temporary storage, and then a
> > > duplicate set of 3 32-bit words into which we copy the buffer
> > > contents
> > > after extracting them from the (non-blocking) socket.
> > >
> > > > - verify (at runtime) that all accesses to fraghdr, xid, and
> > > > calldir
> > > > are aligned,
> > > > - enable RPC_DEBUG_DATA, nothing fishy seen at first sight.
> > > >
> > > > Is anyone else seeing this on MIPS, or any other platform?
> > > > Does mounting NFS with -o nfsvers=3,tcp work on other MIPS
> > > > platforms?
> > >
> > > I have no access to any MIPS hardware for the purposes of testing
> > > so
> > > that would be a question for the community.
> > >
> > > One thing that I have noticed is that unlike the old code, the
> > > bvec
> > > 'generic' code does appear to fail to call flush_dcache_page().
> > > Could
> > > that be causing the problem here? If so, why would that not be a
> > > problem in the context of regular block I/O?
>
> Thanks for the hint!
>
> It wasn't clear to me where exactly the old code called
> flush_dcache_page(), but as rpcrdma_inline_fixup() calls it in
> between
> copying to a page, and unmapping the page, I added a call to
> flush_dcache_page() to all functions in lib/iov_iter.c that map a
> page
> and copy to it, cfr. the patch below.
>
> And suddenly NFS root over TCP is working again!
Hah! ☺
>
> Note that I have no idea if it affects regular block I/O, as my
> RBTX4927
> does not have block devices.
>
> Also note that this platform does not use highmem.
>
> So, where's the proper place to fix this?
> Thanks in advance!
Given that one of the main use cases for iov_iter is the page cache, I
think that your patch below is the correct one. However perhaps Al can
comment?
>
> diff --git a/lib/iov_iter.c b/lib/iov_iter.c
> index 54c248526b55fc49..5be62db33414d3f9 100644
> --- a/lib/iov_iter.c
> +++ b/lib/iov_iter.c
> @@ -277,6 +277,7 @@ static size_t copy_page_from_iter_iovec(struct
> page *page, size_t offset, size_t
> to += copy;
> bytes -= copy;
> }
> + flush_dcache_page(page);
> if (likely(!bytes)) {
> kunmap_atomic(kaddr);
> goto done;
> @@ -463,6 +464,7 @@ static void memcpy_to_page(struct page *page,
> size_t offset, const char *from, s
> {
> char *to = kmap_atomic(page);
> memcpy(to + offset, from, len);
> + flush_dcache_page(page);
> kunmap_atomic(to);
> }
>
> @@ -470,6 +472,7 @@ static void memzero_page(struct page *page,
> size_t offset, size_t len)
> {
> char *addr = kmap_atomic(page);
> memset(addr + offset, 0, len);
> + flush_dcache_page(page);
> kunmap_atomic(addr);
> }
>
> @@ -580,6 +583,7 @@ static size_t csum_and_copy_to_pipe_iter(const
> void *addr, size_t bytes,
> char *p = kmap_atomic(pipe->bufs[idx].page);
> next = csum_partial_copy_nocheck(addr, p + r, chunk,
> 0);
> sum = csum_block_add(sum, next, off);
> + flush_dcache_page(pipe->bufs[idx].page);
> kunmap_atomic(p);
> i->idx = idx;
> i->iov_offset = r + chunk;
> @@ -628,6 +632,7 @@ static unsigned long memcpy_mcsafe_to_page(struct
> page *page, size_t offset,
>
> to = kmap_atomic(page);
> ret = memcpy_mcsafe(to + offset, from, len);
> + flush_dcache_page(page);
> kunmap_atomic(to);
>
> return ret;
> @@ -894,6 +899,7 @@ size_t copy_page_from_iter(struct page *page,
> size_t offset, size_t bytes,
> if (i->type & (ITER_BVEC|ITER_KVEC)) {
> void *kaddr = kmap_atomic(page);
> size_t wanted = _copy_from_iter(kaddr + offset, bytes,
> i);
> + flush_dcache_page(page);
> kunmap_atomic(kaddr);
> return wanted;
> } else
> @@ -958,6 +964,7 @@ size_t iov_iter_copy_from_user_atomic(struct page
> *page,
> v.bv_offset, v.bv_len),
> memcpy((p += v.iov_len) - v.iov_len, v.iov_base,
> v.iov_len)
> )
> + flush_dcache_page(page);
> kunmap_atomic(kaddr);
> return bytes;
> }
> @@ -1494,6 +1501,7 @@ size_t csum_and_copy_to_iter(const void *addr,
> size_t bytes, __wsum *csum,
> next = csum_partial_copy_nocheck((from += v.bv_len) -
> v.bv_len,
> p + v.bv_offset,
> v.bv_len, 0);
> + flush_dcache_page(v.bv_page);
> kunmap_atomic(p);
> sum = csum_block_add(sum, next, off);
> off += v.bv_len;
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 --
> [email protected]
>
--
Trond Myklebust
Linux NFS client maintainer, Hammerspace
[email protected]
Any comments from the iovec experts?
This is a regression in v4.20-rc1.
Thanks!
On Mon, Dec 17, 2018 at 8:01 PM Trond Myklebust <[email protected]> wrote:
> On Mon, 2018-12-17 at 19:55 +0100, Geert Uytterhoeven wrote:
> > (For the newly added CCs, first message was
> > https://lore.kernel.org/lkml/CAMuHMdVJr0PwvJg3FeTCy7vxuyY1=S1tPLHO7hPsoZX4wZ+-cQ@mail.gmail.com/)
> >
> > > On Mon, Dec 17, 2018 at 3:51 PM Trond Myklebust <
> > > [email protected]> wrote:
> > > > On Mon, 2018-12-17 at 15:03 +0100, Geert Uytterhoeven wrote:
> > > > > On Wed, Dec 5, 2018 at 3:47 PM Geert Uytterhoeven <
> > > > > [email protected]> wrote:
> > > > > > On Wed, Dec 5, 2018 at 2:45 PM Trond Myklebust <
> > > > > > [email protected]> wrote:
> > > > > > > On Wed, 2018-12-05 at 14:41 +0100, Geert Uytterhoeven
> > > > > > > wrote:
> > > > > > > > On Wed, Dec 5, 2018 at 2:11 PM Atsushi Nemoto <
> > > > > > > > [email protected]>
> > > > > > > > wrote:
> > > > > > > > > On Tue, 4 Dec 2018 14:53:07 +0100, Geert Uytterhoeven <
> > > > > > > > > [email protected]> wrote:
> > > > > > > > > > I found similar crashes in a report from 2006, but of
> > > > > > > > > > course the
> > > > > > > > > > code
> > > > > > > > > > has changed too much to apply the solution proposed
> > > > > > > > > > there
> > > > > > > > > > (
> > > > > > > > > > https://www.linux-mips.org/archives/linux-mips/2006-09/msg00169.html
> > > > > > > > > > ).
> > > > > > > > > >
> > > > > > > > > > Userland is Debian 8 (the last release supporting
> > > > > > > > > > "old"
> > > > > > > > > > MIPS).
> > > > > > > > > > My kernel is based on v4.20.0-rc5, but the issue
> > > > > > > > > > happens
> > > > > > > > > > with
> > > > > > > > > > v4.20-rc1,
> > > > > > > > > > too.
> > > > > > > > > >
> > > > > > > > > > However, I noticed it works in v4.19! Hence I've
> > > > > > > > > > bisected
> > > > > > > > > > this,
> > > > > > > > > > to commit
> > > > > > > > > > 277e4ab7d530bf28 ("SUNRPC: Simplify TCP receive code
> > > > > > > > > > by
> > > > > > > > > > switching
> > > > > > > > > > to using
> > > > > > > > > > iterators").
> > > > > > > > > >
> > > > > > > > > > Dropping the ",tcp" part from the nfsroot parameter
> > > > > > > > > > also
> > > > > > > > > > fixes
> > > > > > > > > > the issue.
> > > > > > > > > >
> > > > > > > > > > Given RBTX4927 is little endian, just like my
> > > > > > > > > > arm/arm64
> > > > > > > > > > boards,
> > > > > > > > > > it's probably
> > > > > > > > > > not an endianness issue. Sparse didn't show anything
> > > > > > > > > > suspicious
> > > > > > > > > > before/after
> > > > > > > > > > the guilty commit.
> > > > > > > > > >
> > > > > > > > > > Do you have a clue?
> > > > > > > > >
> > > > > > > > > If it was a cache issue, disabling i-cache or d-cache
> > > > > > > > > completely
> > > > > > > > > might
> > > > > > > > > help understanding the problem. I added TXx9 specific
> > > > > > > > > "icdisable"
> > > > > > > > > and
> > > > > > > > > "dcdisable" kernel options for debugging long ago.
> > > > > > > > >
> > > > > > > > > I hope these options still works correctly with recent
> > > > > > > > > kernel
> > > > > > > > > but
> > > > > > > > > not
> > > > > > > > > sure.
> > > > > > > > >
> > > > > > > > > Also, disabling i-cache makes your board VERY slow, of
> > > > > > > > > course.
> > > > > > > >
> > > > > > > > Thanks!
> > > > > > > >
> > > > > > > > When using these options, I do see a slowdown in early
> > > > > > > > boot,
> > > > > > > > but the
> > > > > > > > issue
> > > > > > > > is still there.
> > > > > > > >
> > > > > > > > My next guess is an unaligned access not using
> > > > > > > > {get,put}_unaligned(),
> > > > > > > > which
> > > > > > > > doesn't seem to work on tx4927, but doesn't cause an
> > > > > > > > exception
> > > > > > > > neither.
> > > > > > >
> > > > > > > Can you try my linux-next branch on git.linux-nfs.org? It
> > > > > > > contains a
> > > > > > > fixes for a hang that results from the above commit.
> > > > > > >
> > > > > > > git pull git://git.linux-nfs.org/projects/trondmy/linux-
> > > > > > > nfs.git
> > > > > > > linux-next
> > > > > >
> > > > > > Thanks for the suggestion, but unfortunately it doesn't help.
> > > > >
> > > > > In the mean time, I tried your newer linux-next, no change.
> > > > > I tried several other things:
> > > > > - remove the packed attribute (why did you add that?),
> > > >
> > > > The packed attribute allows us to avoid a series of copy
> > > > operations
> > > > when decoding the first three elements of a RPC over TCP header
> > > > (which
> > > > is why they are all declared as big endian). The alternative
> > > > would be
> > > > to have a 12 byte buffer there for temporary storage, and then a
> > > > duplicate set of 3 32-bit words into which we copy the buffer
> > > > contents
> > > > after extracting them from the (non-blocking) socket.
> > > >
> > > > > - verify (at runtime) that all accesses to fraghdr, xid, and
> > > > > calldir
> > > > > are aligned,
> > > > > - enable RPC_DEBUG_DATA, nothing fishy seen at first sight.
> > > > >
> > > > > Is anyone else seeing this on MIPS, or any other platform?
> > > > > Does mounting NFS with -o nfsvers=3,tcp work on other MIPS
> > > > > platforms?
> > > >
> > > > I have no access to any MIPS hardware for the purposes of testing
> > > > so
> > > > that would be a question for the community.
> > > >
> > > > One thing that I have noticed is that unlike the old code, the
> > > > bvec
> > > > 'generic' code does appear to fail to call flush_dcache_page().
> > > > Could
> > > > that be causing the problem here? If so, why would that not be a
> > > > problem in the context of regular block I/O?
> >
> > Thanks for the hint!
> >
> > It wasn't clear to me where exactly the old code called
> > flush_dcache_page(), but as rpcrdma_inline_fixup() calls it in
> > between
> > copying to a page, and unmapping the page, I added a call to
> > flush_dcache_page() to all functions in lib/iov_iter.c that map a
> > page
> > and copy to it, cfr. the patch below.
> >
> > And suddenly NFS root over TCP is working again!
>
> Hah!
>
> >
> > Note that I have no idea if it affects regular block I/O, as my
> > RBTX4927
> > does not have block devices.
> >
> > Also note that this platform does not use highmem.
> >
> > So, where's the proper place to fix this?
> > Thanks in advance!
>
> Given that one of the main use cases for iov_iter is the page cache, I
> think that your patch below is the correct one. However perhaps Al can
> comment?
>
> >
> > diff --git a/lib/iov_iter.c b/lib/iov_iter.c
> > index 54c248526b55fc49..5be62db33414d3f9 100644
> > --- a/lib/iov_iter.c
> > +++ b/lib/iov_iter.c
> > @@ -277,6 +277,7 @@ static size_t copy_page_from_iter_iovec(struct
> > page *page, size_t offset, size_t
> > to += copy;
> > bytes -= copy;
> > }
> > + flush_dcache_page(page);
> > if (likely(!bytes)) {
> > kunmap_atomic(kaddr);
> > goto done;
> > @@ -463,6 +464,7 @@ static void memcpy_to_page(struct page *page,
> > size_t offset, const char *from, s
> > {
> > char *to = kmap_atomic(page);
> > memcpy(to + offset, from, len);
> > + flush_dcache_page(page);
> > kunmap_atomic(to);
> > }
> >
> > @@ -470,6 +472,7 @@ static void memzero_page(struct page *page,
> > size_t offset, size_t len)
> > {
> > char *addr = kmap_atomic(page);
> > memset(addr + offset, 0, len);
> > + flush_dcache_page(page);
> > kunmap_atomic(addr);
> > }
> >
> > @@ -580,6 +583,7 @@ static size_t csum_and_copy_to_pipe_iter(const
> > void *addr, size_t bytes,
> > char *p = kmap_atomic(pipe->bufs[idx].page);
> > next = csum_partial_copy_nocheck(addr, p + r, chunk,
> > 0);
> > sum = csum_block_add(sum, next, off);
> > + flush_dcache_page(pipe->bufs[idx].page);
> > kunmap_atomic(p);
> > i->idx = idx;
> > i->iov_offset = r + chunk;
> > @@ -628,6 +632,7 @@ static unsigned long memcpy_mcsafe_to_page(struct
> > page *page, size_t offset,
> >
> > to = kmap_atomic(page);
> > ret = memcpy_mcsafe(to + offset, from, len);
> > + flush_dcache_page(page);
> > kunmap_atomic(to);
> >
> > return ret;
> > @@ -894,6 +899,7 @@ size_t copy_page_from_iter(struct page *page,
> > size_t offset, size_t bytes,
> > if (i->type & (ITER_BVEC|ITER_KVEC)) {
> > void *kaddr = kmap_atomic(page);
> > size_t wanted = _copy_from_iter(kaddr + offset, bytes,
> > i);
> > + flush_dcache_page(page);
> > kunmap_atomic(kaddr);
> > return wanted;
> > } else
> > @@ -958,6 +964,7 @@ size_t iov_iter_copy_from_user_atomic(struct page
> > *page,
> > v.bv_offset, v.bv_len),
> > memcpy((p += v.iov_len) - v.iov_len, v.iov_base,
> > v.iov_len)
> > )
> > + flush_dcache_page(page);
> > kunmap_atomic(kaddr);
> > return bytes;
> > }
> > @@ -1494,6 +1501,7 @@ size_t csum_and_copy_to_iter(const void *addr,
> > size_t bytes, __wsum *csum,
> > next = csum_partial_copy_nocheck((from += v.bv_len) -
> > v.bv_len,
> > p + v.bv_offset,
> > v.bv_len, 0);
> > + flush_dcache_page(v.bv_page);
> > kunmap_atomic(p);
> > sum = csum_block_add(sum, next, off);
> > off += v.bv_len;
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds