Henryk,
Can we test our sbc decoder code in the following
manner...
In the sbcdec.c file, can we put the decoded samples
of an sbc file on /dev/dsp ???
If this works, then our a2snk application is almost
done (ofcourse i am not considering the timing right
now cause that is a whole big problem).
I tried the above mentioned thing, but again, i could
faintly hear the music (the actual one) and a LOT of
noise.
But on the contrary I feel that since the encoder code
is working fine, then intuition says that decoder
should be correct.
So I feel that we are not able to handle the decoded
samples properly.
Mayank.
________________________________________________________________________
Yahoo! India Matrimony: Find your life partner online
Go to: http://yahoo.shaadi.com/india-matrimony
-------------------------------------------------------
SF.Net email is sponsored by: Tell us your software development plans!
Take this survey and enter to win a one-year sub to SourceForge.net
Plus IDC's 2005 look-ahead and a copy of this survey
Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi Mayank,
> Can we test our sbc decoder code in the following
> manner...
>
> In the sbcdec.c file, can we put the decoded samples
> of an sbc file on /dev/dsp ???
at the moment it is using the AO library for output, but you can send me
a patch to allow direct using of /dev/dsp.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by: Tell us your software development plans!
Take this survey and enter to win a one-year sub to SourceForge.net
Plus IDC's 2005 look-ahead and a copy of this survey
Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel