Hello,
is someone planning to port bt3c for the 3Com cards to the 2.6 kernel ?
Another part not compiling on 2.6 is the bluefw. Is someone working on
this ?
Good day.
Olivier
--
Olivier Bornet http://www.smartdata.ch/
[email protected] SMARTDATA SA
GPG key ID: C53D9218 CH Martigny/Lausanne
Hi Olivier,
> is someone planning to port bt3c for the 3Com cards to the 2.6 kernel ?
the bt3c_cs should be rewritten to use the request_firmware() interface.
> Another part not compiling on 2.6 is the bluefw. Is someone working on
> this ?
I don't wanna keep the bluefw program. For the Broadcom devices the new
bcm203x driver (from -mh2) can be used.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hello,
forget my last message... I don't have look at the kernel configuration
correctly.
Of course, bt3c_cs is in the kernel source.
(bluefw is not compiling with 2.6 kernel, but this is another
problem...)
Good day, and sorry for the trouble.
Olivier
--
Olivier Bornet http://www.smartdata.ch/
[email protected] SMARTDATA SA
GPG key ID: C53D9218 CH Martigny/Lausanne