Hey, =
I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3.
Unfortunately, the upgrade seems to have failed: The D-Link's light
don't light up anymore and no USB-device is detected when plugging
in the device.
Is there a known way to force the Dongle to boot into DFU-Mode? Or
is it hopelessly flashed to death?
Thanks, =
greetings, =
andy
-- =
Andreas B=F6hler
andy (dot) boehler (at) gmx (dot) at
http://klasseonline.dyndns.org
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Andreas B=F6hler wrote:
> Hey, =
> =
> I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3.
> Unfortunately, the upgrade seems to have failed: The D-Link's light
> don't light up anymore and no USB-device is detected when plugging
> in the device.
> =
> Is there a known way to force the Dongle to boot into DFU-Mode? Or
> is it hopelessly flashed to death?
if it has spi you might be able to reflash. but i never tried that.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Martin Karger wrote:
> Andreas B=F6hler wrote:
>> Hey, =
>>
>> I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3.
>> Unfortunately, the upgrade seems to have failed: The D-Link's light
>> don't light up anymore and no USB-device is detected when plugging
>> in the device.
>>
>> Is there a known way to force the Dongle to boot into DFU-Mode? Or
>> is it hopelessly flashed to death?
> =
> if it has spi you might be able to reflash. but i never tried that.
short article on debricking you bt-dongle via spi:
http://www.evilgenius.de/2007/06/11/de-bricking-your-bluetooth-dongle/
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Martin Karger wrote:
> Andreas B=F6hler wrote:
>> Hey, =
>>
>> I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3.
>> Unfortunately, the upgrade seems to have failed: The D-Link's light
>> don't light up anymore and no USB-device is detected when plugging
>> in the device.
>>
>> Is there a known way to force the Dongle to boot into DFU-Mode? Or
>> is it hopelessly flashed to death?
> =
> if it has spi you might be able to reflash. but i never tried that.
short article on debricking you bt-dongle via spi:
http://www.evilgenius.de/2007/06/11/de-bricking-your-bluetooth-dongle/
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel