Hi,
I'm studying hciconfig.c to learn how to set inquiry mode and
parameters. As I play with the binary to understand the source, I get
the following error on "hciconfig hci0 inqmode":
Can't read inquiry mode on hci0. Input/output error(5)
The "inqparms" command reads from hci0 just fine, with no errors. I
have "iscan enable" set in /etc/bluetooth/hcid.conf ... what else
should I check?
Thanks for your time,
jw
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
On Sat, 25 Dec 2004 00:38:21 +0100, Marcel Holtmann <[email protected]> wrote:
> Hi Jeff,
>
> > I'm studying hciconfig.c to learn how to set inquiry mode and
> > parameters. As I play with the binary to understand the source, I get
> > the following error on "hciconfig hci0 inqmode":
> >
> > Can't read inquiry mode on hci0. Input/output error(5)
> >
> > The "inqparms" command reads from hci0 just fine, with no errors. I
> > have "iscan enable" set in /etc/bluetooth/hcid.conf ... what else
> > should I check?
>
> you need a Bluetooth 1.2 device with inquiry with RSSI support.
What about older devices without RSSI?
thanks,
jw
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi Jeff,
> I'm studying hciconfig.c to learn how to set inquiry mode and
> parameters. As I play with the binary to understand the source, I get
> the following error on "hciconfig hci0 inqmode":
>
> Can't read inquiry mode on hci0. Input/output error(5)
>
> The "inqparms" command reads from hci0 just fine, with no errors. I
> have "iscan enable" set in /etc/bluetooth/hcid.conf ... what else
> should I check?
you need a Bluetooth 1.2 device with inquiry with RSSI support.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Thanks for the tips, Peter and Marcel. If I get something working,
I'll post back to let you know.
Best regards,
jw
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
> The only 1.2 devices listed at
> http://www.holtmann.org/linux/bluetooth/devices.html are the Apple G4
> and the Lifetech BlueConnect (but then I saw Carlos say that isn't
> so).
>
> I'm in the market for a couple of 1.2 USB dongles I can use with the
> latest BlueZ kernel. Any suggestions? I found "ANYCOM USB-120 USB
> Adapter" on Froogle. Any comments about Anycom?
>From the thread that appeared the other day on the users list can't
you just buy one of the upgradable BT 1.1 devices like a later
revision of the DLink BT-120 and upgrade it to the 1.2 standard.
Thread here
http://sourceforge.net/mailarchive/forum.php?thread_id=6278463&forum_id=1883
Regards
Peter
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi Jeff,
> The only 1.2 devices listed at
> http://www.holtmann.org/linux/bluetooth/devices.html are the Apple G4
> and the Lifetech BlueConnect (but then I saw Carlos say that isn't
> so).
>
> I'm in the market for a couple of 1.2 USB dongles I can use with the
> latest BlueZ kernel. Any suggestions? I found "ANYCOM USB-120 USB
> Adapter" on Froogle. Any comments about Anycom?
the Anycom with Bluetooth 1.2 uses a Silicon Wave chip, but this is a
ROM version and the inquiry with RSSI has a bug.
Regards
Marcel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
On Sat, 25 Dec 2004 00:38:21 +0100, Marcel Holtmann <[email protected]> wrote:
> Hi Jeff,
>
> you need a Bluetooth 1.2 device with inquiry with RSSI support.
>
> Regards
>
> Marcel
>
The only 1.2 devices listed at
http://www.holtmann.org/linux/bluetooth/devices.html are the Apple G4
and the Lifetech BlueConnect (but then I saw Carlos say that isn't
so).
I'm in the market for a couple of 1.2 USB dongles I can use with the
latest BlueZ kernel. Any suggestions? I found "ANYCOM USB-120 USB
Adapter" on Froogle. Any comments about Anycom?
Thanks for your time,
jw
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel