Hi,
I resolved the problem of integrating HCI driver. I can now use
"hciconfig hci0 up" to bring up the device. MAC address can be read
correctly. Kernel porting seems ok so far.
But when I use "hciconfig -a", it has problem to read "Name", "Class",
and so on from /etc/bluetooth/hcid.conf (which I created already in the
embedded
ramdisk). Any dependancy among those utilities? For example, if I need to
use "hciconfig",
"hcid" is needed?
thanks for helps,
Al
----- Original Message -----
From: "durai" <[email protected]>
To: <[email protected]>
Sent: Monday, August 15, 2005 3:22 PM
Subject: Re: [Bluez-devel] Porting BlueZ on embedded uClinux
-----Original Message-----
From: [email protected] ?N?z durai
Sent: 2005/8/15 [?P???@] ?U?? 03:22
To: [email protected]
Cc:
Subject: Re: [Bluez-devel] Porting BlueZ on embedded uClinux
Hi Al,
I recently ported bluez stack in a embedded linux running 2.4.18 kernel.
First I downloaded the MH patch from http://www.holtmann.org/linux/kernel/.
and
applied it. Now both statically compiled driver as well as modules are
working correctly.
You can also try finding an appropriate patch and patch it with your kernel.
But what is
surprising for me is, though your kernel is 2.4.21 and you are not able to
find the options in
make menuconfig. I guess something is messed up in your package.
Can you find "hci_usb_init" in your System.map? Is it integrated correctly?
regards
durai
Hi AL,
I think you will need hcid anyway to do anything usefull.
Ciao,
Peter
On Mon, 15 Aug 2005, Al wrote:
> Hi,
>
> I resolved the problem of integrating HCI driver. I can now use
> "hciconfig hci0 up" to bring up the device. MAC address can be read
> correctly. Kernel porting seems ok so far.
>
> But when I use "hciconfig -a", it has problem to read "Name", "Clas=
s",
> and so on from /etc/bluetooth/hcid.conf (which I created already in the
> embedded
> ramdisk). Any dependancy among those utilities? For example, if I need =
to
> use "hciconfig",
> "hcid" is needed?
>
> thanks for helps,
>
> Al
>
> ----- Original Message -----
> From: "durai" <[email protected]>
> To: <[email protected]>
> Sent: Monday, August 15, 2005 3:22 PM
> Subject: Re: [Bluez-devel] Porting BlueZ on embedded uClinux
>
> -----Original Message-----
> From: [email protected] =A5N=B2z durai
> Sent: 2005/8/15 [=ACP=B4=C1=A4@] =A4U=A4=C8 03:22
> To: [email protected]
> Cc:
> Subject: Re: [Bluez-devel] Porting BlueZ on embedded uClinux
>
>
>
> Hi Al,
> I recently ported bluez stack in a embedded linux running 2.4.18 kerne=
l.
> First I downloaded the MH patch from http://www.holtmann.org/linux/ke=
rnel/.
> and
> applied it. Now both statically compiled driver as well as modules are
> working correctly.
> You can also try finding an appropriate patch and patch it with your k=
ernel.
> But what is
> surprising for me is, though your kernel is 2.4.21 and you are not abl=
e to
> find the options in
> make menuconfig. I guess something is messed up in your package.
>
> Can you find "hci_usb_init" in your System.map? Is it integrated corre=
ctly?
> regards
> durai
>
>
>
| Peter Wippich Voice: +49 30 46776411 |
| G&W Instruments GmbH fax: +49 30 46776419 |
| Gustav-Meyer-Allee 25, Geb. 12 Email: [email protected] |
| D-13355 Berlin / Germany |
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel