Hi,
I recently purchased a Motorola HT820 headset and DC800 audio gateway
which acts as a a2dp audio source to the headphones or sink music from a
mobile phone/computer to your hifi.
I can make the computer stream music to the HT820 headset without
problems, but I can't seem to stream any music to my hifi from the
computer via the DC800. When playing music to the DC800 the unit pairs
with the computer and the LED on the front of the unit flashes as though
the computer is connected to it, but no audio is heard from the speakers.
Below is the debug output from a2dpd. Is there any other information
which may help solve the problem that I can provide?
a2dpd -g -f /etc/bluetooth/a2dp.conf
A2DPD[21:29:11.491]: main: Config file /etc/bluetooth/a2dp.conf
A2DPD[21:29:11.492]: init_ipc: Selected IPC: unix, addr=127.0.0.1,
bcst=127.0.0.255, port=21453
A2DPD[21:29:11.492]: main: a2dpd [Sep 3 2008 17:46:56] starting ...
A2DPD[21:29:11.492]: main: (errno=9:Bad file descriptor)a2dpd
addr=00:07:A4:D5:49:6F timer=0 us [Sep 3 2008 17:46:56]
A2DPD[21:29:11.493]: a2dpd_signal_init: Getting on DBUS
A2DPD[21:29:11.496]: a2dpd_signal_init: Installing watch
A2DPD[21:29:11.497]: add_dbus_watch: Added watch 0 0xa007350 disabled
A2DPD[21:29:11.497]: add_dbus_watch: Added watch 1 0xa007ef8 enabled
A2DPD[21:29:11.497]: a2dpd_signal_init: Registering object path:
/com/access/a2dpd
A2DPD[21:29:11.497]: a2dpd_signal_init: Acquiring service: com.access.a2dpd
A2DPD[21:29:11.499]: a2dpd_signal_init: OK
A2DPD[21:29:11.499]: a2dpd_signal_init: OK
A2DPD[21:29:11.499]: a2dpd_register_sdp: Start
A2DPD[21:29:11.500]: add_avrtg:
A2DPD[21:29:11.501]: add_a2source:
A2DPD[21:29:11.505]: a2dpd_register_sdp: OK
A2DPD[21:29:11.505]: main_loop:
A2DPD[21:29:11.505]: make_server_socket:
A2DPD[21:29:11.505]: a2dpd_signal_state: Started 00:07:A4:D5:49:6F
A2DPD[21:29:11.505]: bta2dpdevicenew:
A2DPD[21:29:11.505]: a2dpd_signal_address_changed: 00:07:A4:D5:49:6F
A2DPD[21:29:11.505]: a2dpd_signal_set_socket: Signal socket set to 7
A2DPD[21:29:11.506]: a2dpd_signal_state: Disconnected
A2DPD[21:29:11.506]: a2dp_alloc:
A2DPD[21:29:11.506]: a2dp_alloc: (a2dp = 0xa00b898)
A2DPD[21:29:11.506]: a2dp_new: 00:07:A4:D5:49:6F, 44100
A2DPD[21:29:11.506]: a2dp_new: State AVDTP_STATE_DISCONNECTED
A2DPD[21:29:11.506]: alsa_new:
A2DPD[21:29:11.506]: alsa_new: device=plughw:0,0, framerate=44100
A2DPD[21:29:11.506]: alsa_new: State ALSA_STATE_DISCONNECTED
A2DPD[21:29:11.506]: alsa_new: returning 0xa00da30
A2DPD[21:29:11.506]: sco_new:
A2DPD[21:29:11.506]: sco_new: State SCO_STATE_DISCONNECTED
A2DPD[21:29:11.506]: sco_state_disconnect: Filtering state : already
disconnected
A2DPD[21:29:11.506]: main_loop: Bluetooth Device Settings [44100 hz, 2
channels, 16 bits]
A2DPD[21:29:11.507]: avrcp_new: Listening for AVRCP on socket 9
A2DPD[21:29:11.507]: avrcp_new: 0xa00db40
A2DPD[21:29:28.279]: a2dp_reset_encoding_buffer:
A2DPD[21:29:28.279]: pollfd_cb_sockfd: Client 10 got index 0
A2DPD[21:29:28.321]: stream_client_state_streamingsetup: PLAYBACK thread
client_index=0, socket=10, id=0 started (44100 Hz, 2 channels, 16 bits,
ring 65536, threshold 65536)
A2DPD[21:29:28.323]: a2dp_state_connect: State AVDTP_STATEX_SDP_CONNECTING
A2DPD[21:29:28.323]: a2dp_state_machine: Role is INITIATOR
A2DPD[21:29:28.346]: a2dp_state_machine: (errno=115:Operation now in
progress)SDP connection on socket 11
A2DPD[21:29:28.346]: a2dp_state_machine: State
AVDTP_STATEX_SDP_CONNECTING_WAIT
A2DPD[21:29:28.346]: a2dpd_signal_state: Connecting 00:07:A4:D5:49:6F
A2DPD[21:29:31.896]: a2dp_state_machine: SDP connection terminated
A2DPD[21:29:32.072]: get_avdtp_psm: Parsing results
A2DPD[21:29:32.072]: get_avdtp_psm: Record
A2DPD[21:29:32.073]: get_avdtp_psm: Record
A2DPD[21:29:32.073]: get_avdtp_psm: Service Search OK
A2DPD[21:29:32.139]: get_avdtp_psm: Checking non spec audio
A2DPD[21:29:32.139]: a2dp_state_machine: Found psm 25
A2DPD[21:29:32.140]: a2dp_state_machine: State AVDTP_STATEX_CTL_CONNECTING
A2DPD[21:29:32.140]: a2dp_state_machine: Socket is 11
A2DPD[21:29:32.140]: a2dp_state_machine: (errno=115:Operation now in
progress)State AVDTP_STATEX_CTL_CONNECTING_WAIT
A2DPD[21:29:32.457]: a2dp_state_machine: State AVDTP_STATE_IDLE
A2DPD[21:29:32.457]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING
A2DPD[21:29:32.462]: a2dp_state_machine: State AVDTP_STATEX_DISCOVERING_RESP
A2DPD[21:29:32.754]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_DISCOVER)
A2DPD[21:29:32.754]: a2dp_state_machine: AVDTP_DISCOVER success
A2DPD[21:29:32.755]: a2dp_state_machine: State
AVDTP_STATEX_GETTING_CAPABILITIES
A2DPD[21:29:32.755]: a2dp_state_machine: Getting capabilities for SEID=3
A2DPD[21:29:32.755]: a2dp_state_machine: State
AVDTP_STATEX_GETTING_CAPABILITIES_RESP
A2DPD[21:29:32.846]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_GET_CAPABILITIES)
A2DPD[21:29:32.846]: a2dp_state_machine: AVDTP_GET_CAPABILITIES success
for seid 3
A2DPD[21:29:32.846]: a2dp_state_machine: servcap_cap=1, servcap_len=0,
A2DPD[21:29:32.847]: a2dp_state_machine: cap_type=7, length=6
A2DPD[21:29:32.847]: a2dp_state_machine: media_type=0, codec=0
A2DPD[21:29:32.847]: a2dp_state_machine: A2DPD Prefered bitpool 32
A2DPD[21:29:32.847]: a2dp_state_machine: Device Prefered bitpool 2 -> 53
A2DPD[21:29:32.847]: a2dp_state_machine: A2DPD Selected bitpool 32
A2DPD[21:29:32.847]: a2dp_state_machine: State
AVDTP_STATEX_SETTING_CONFIGURATION
A2DPD[21:29:32.848]: a2dp_state_machine: State
AVDTP_STATEX_SETTING_CONFIGURATION_RESP
A2DPD[21:29:33.041]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_SET_CONFIGURATION)
A2DPD[21:29:33.041]: a2dp_state_machine: AVDTP_SET_CONFIGURATION success
A2DPD[21:29:33.041]: a2dp_state_machine: State AVDTP_STATEX_STREAM_OPENING
A2DPD[21:29:33.042]: a2dp_state_machine: State
AVDTP_STATEX_STREAM_OPENING_RESP
A2DPD[21:29:33.157]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_OPEN)
A2DPD[21:29:33.157]: a2dp_state_machine: AVDTP_OPEN success
A2DPD[21:29:33.157]: a2dp_state_machine: State AVDTP_STATE_CONFIGURED
A2DPD[21:29:33.162]: a2dp_state_machine: State
AVDTP_STATEX_STREAM_CONNECTING
A2DPD[21:29:33.170]: a2dp_state_machine: Socket is 12
A2DPD[21:29:33.170]: a2dp_state_machine: (errno=115:Operation now in
progress)State AVDTP_STATEX_STREAM_CONNECTING_WAIT
A2DPD[21:29:33.616]: a2dp_state_machine: Stream connected
A2DPD[21:29:33.616]: get_socket_omtu: Socket 12 imtu=672, omtu=895,
flush_to=65535
A2DPD[21:29:33.616]: a2dp_state_machine: State
AVDTP_STATE_OPEN_START_STREAMING
A2DPD[21:29:33.623]: a2dp_state_machine: State AVDTP_STATEX_STREAM_STARTING
A2DPD[21:29:33.623]: a2dpd_signal_state: Connected 00:07:A4:D5:49:6F
A2DPD[21:29:33.624]: a2dp_state_machine: State
AVDTP_STATEX_STREAM_STARTING_WAIT
A2DPD[21:29:33.925]: a2dp_handle_avdtp_message: Read non command packet
(msgtype=MESSAGE_TYPE_ACCEPT,signal=AVDTP_START)
A2DPD[21:29:33.925]: a2dp_state_machine: AVDTP_START success
A2DPD[21:29:33.925]: a2dp_state_machine: State AVDTP_STATE_STREAMING
A2DPD[21:29:33.930]: a2dp_transfer_raw: Samples starting
Best regards,
Stephan
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi,
Can anyone tell how to share internet connection in my computer to the other
devices through bluetooth connection. Is there any software for this??
Please help me in this regard.
Thank You.
Rakesh
On Wed, Sep 24, 2008 at 4:02 AM, Brad Midgley <[email protected]> wrote:
> Stephan
>
> Sorry for the miscue. You should go to the bluez wiki and use the
> instructions there for sending a2dp audio to a headset from your pc.
> It's best if you're on a recent bluez.
>
> http://wiki.bluez.org/wiki/HOWTO/AudioDevices
>
> Brad
>
> On Tue, Sep 23, 2008 at 3:27 PM, Stephan de Georgio <[email protected]>
> wrote:
> > Brad,
> >
> > >afaik, this is still only possible using "a2recv" in the old btsco
> > project.
> >
> > Is a2recv not for streaming audio from the DC800 to the PC? I'm trying
> > to stream audio from the PC to the DC800. I can't seem to find any
> > documentation on a2recv except the small snippet below from the
> > bluetooth-alsa build page.
> >
> > >The A2DP sink code receives a stream from another device. Run it with:
> > > hciconfig hci0 class 0x200404
> > > sdptool add A2SNK
> > > ./a2recv
> >
> > >It will try to bind to the bluetooth adapter and send audio out to
> > /dev/dsp.
> >
> > I have installed the btsco package and tried running this and a2recv
> > just hangs with no output. Is there something else I need to do before
> > running a2recv?
> >
> > I've also tried the command
> >
> > mpg123 --au - file.mp3 | ./a2play bdaddr
> >
> > where bdaddr is the address of the DC800, but this give no audio output
> > either.
> >
> > Any help would be very much appreciated.
> >
> > Regards,
> > Stephan
> >
> >
> > -------------------------------------------------------------------------
> > This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> > Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> > Grand prize is a trip for two to an Open Source event anywhere in the
> world
> > http://moblin-contest.org/redirect.php?banner_id=100&url=/
> > _______________________________________________
> > Bluez-devel mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/bluez-devel
> >
>
>
>
> --
> Brad
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Bluez-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
Stephan
Sorry for the miscue. You should go to the bluez wiki and use the
instructions there for sending a2dp audio to a headset from your pc.
It's best if you're on a recent bluez.
http://wiki.bluez.org/wiki/HOWTO/AudioDevices
Brad
On Tue, Sep 23, 2008 at 3:27 PM, Stephan de Georgio <[email protected]> wrote:
> Brad,
>
> >afaik, this is still only possible using "a2recv" in the old btsco
> project.
>
> Is a2recv not for streaming audio from the DC800 to the PC? I'm trying
> to stream audio from the PC to the DC800. I can't seem to find any
> documentation on a2recv except the small snippet below from the
> bluetooth-alsa build page.
>
> >The A2DP sink code receives a stream from another device. Run it with:
> > hciconfig hci0 class 0x200404
> > sdptool add A2SNK
> > ./a2recv
>
> >It will try to bind to the bluetooth adapter and send audio out to
> /dev/dsp.
>
> I have installed the btsco package and tried running this and a2recv
> just hangs with no output. Is there something else I need to do before
> running a2recv?
>
> I've also tried the command
>
> mpg123 --au - file.mp3 | ./a2play bdaddr
>
> where bdaddr is the address of the DC800, but this give no audio output
> either.
>
> Any help would be very much appreciated.
>
> Regards,
> Stephan
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Bluez-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
--
Brad
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Brad,
>afaik, this is still only possible using "a2recv" in the old btsco
project.
Is a2recv not for streaming audio from the DC800 to the PC? I'm trying
to stream audio from the PC to the DC800. I can't seem to find any
documentation on a2recv except the small snippet below from the
bluetooth-alsa build page.
>The A2DP sink code receives a stream from another device. Run it with:
> hciconfig hci0 class 0x200404
> sdptool add A2SNK
> ./a2recv
>It will try to bind to the bluetooth adapter and send audio out to
/dev/dsp.
I have installed the btsco package and tried running this and a2recv
just hangs with no output. Is there something else I need to do before
running a2recv?
I've also tried the command
mpg123 --au - file.mp3 | ./a2play bdaddr
where bdaddr is the address of the DC800, but this give no audio output
either.
Any help would be very much appreciated.
Regards,
Stephan
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Stephan
> I can make the computer stream music to the HT820 headset without
> problems, but I can't seem to stream any music to my hifi from the
> computer via the DC800.
afaik, this is still only possible using "a2recv" in the old btsco project.
--
Brad
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel