Hello everybody! I have a experimental CSR dongle on my hands and I have to put
it to work with linux bluez! But my problem is: what configuration bluez
uses?!
It works with BCSP or I need to use H4 Link on my board?!? I m trying to use BCSP
but it not works at all... Please, someone can help me....
When I put " hciattach /dev/ttyS0 csr 115200 flow " I receive a timeout message!
Someone have a CSR developer board and have installed it all right. A tutorial would be so nice to me....
Thanks a lot, Daniel Moraes!
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Scott,
> For BCSP try hciattach /dev/ttyS0 bcsp 115200 flow
>
> or for H4
>
> hciattach /dev/ttyS0 any 115200 flow
it is better to use "hciattach ttyS0 csr 115200 flow".
Regards
Marcel
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
For BCSP try hciattach /dev/ttyS0 bcsp 115200 flow
or for H4
hciattach /dev/ttyS0 any 115200 flow
Regards,
Scott
Daniel Moraes <[email protected]>
Sent by: [email protected]
02/20/2004 04:17 PM
To: [email protected]
cc:
Subject: [Bluez-users] CSR experimental uart board!
Hello everybody! I have a experimental CSR dongle on my hands and I have
to put
it to work with linux bluez! But my problem is: what configuration bluez
uses?!
It works with BCSP or I need to use H4 Link on my board?!? I m trying to
use BCSP
but it not works at all... Please, someone can help me....
When I put " hciattach /dev/ttyS0 csr 115200 flow " I receive a timeout
message!
Someone have a CSR developer board and have installed it all right. A
tutorial would be so nice to me....
Thanks a lot, Daniel Moraes!
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users