hi,
im using an elmeg [email protected] AP has anyone figured out how to pair and
connect the device
or is it impossible too do that using bluez(at the moment)?
using
gentoo linux 2.6.3
USB BT-Device (BT3030 Tecom)
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On Wed, 25 Feb 2004 17:18:55 +0100, Marcel Holtmann <[email protected]>
wrote:
> Hi Florian,
>
>> im using an elmeg [email protected] AP has anyone figured out how to pair and
>> connect the device
>> or is it impossible too do that using bluez(at the moment)?
>
> it looks like the AP is using LAN access using PPP and DUN. So it should
> be easy to connect to the AP using
>
> dund --connect <bdaddr-ap>
>
> Please also run "hcitool info <bdaddr-ap>" (as root) and show us the
> output.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF.Net is sponsored by: Speed Start Your Linux Apps Now.
> Build and deploy apps & Web services for Linux with
> a free DVD software kit from IBM. Click Now!
> http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
hi again,
thx for the high speed reply,
i have run both
bash-2.05b# dund --connect 00:0B:CE:00:01:8E
bash-2.05b# hcitool info 00:0B:CE:00:01:8E
Requesting information ...
BD Address: 00:0B:CE:00:01:8E
Device Name: elmeg [email protected]
LMP Version: 1.1 (0x1) LMP Subversion: 0x175
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00
<3-slot packets> <5-slot packets> <encryption> <slot
offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<park mode> <RSSI> <channel quality> <SCO link>
<HV2 packets> <HV3 packets> <u-law log> <A-law log>
<CVSD> <paging scheme> <power control> <transparent SCO>
mhh this is what i get. But still no clue how to get things working.
In my eyes pairing comes next then establishing a connetion and then tell
the AP
username and passwd.
Found an option in dund using MSDUN but did not get it the way i want.
suggestions?
Regards
Florian
P.S.: tried using mailing list archives
(http://sourceforge.net/mailarchive/forum.php?forum_id=672)
but get
ERROR
Forum not found
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Florian,
> im using an elmeg [email protected] AP has anyone figured out how to pair and
> connect the device
> or is it impossible too do that using bluez(at the moment)?
it looks like the AP is using LAN access using PPP and DUN. So it should
be easy to connect to the AP using
dund --connect <bdaddr-ap>
Please also run "hcitool info <bdaddr-ap>" (as root) and show us the
output.
Regards
Marcel
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Florian,
> > you can use
> >
> > dund --nodetach --connect 00:0B:CE:00:01:8E --msdun call lap
> >
> > and create a /etc/ppp/peers/lap file with your PPP settings. But that is
> > now up to you, because I don't know what your AP is expecting.
>
> at first thanks for your fast help!!!! In the end it works I can connect
> to the AP
> using PAP and ppp.(little trick - after conection is established I have to
> use route
> to set a gateway "route add default gw 192.168.1.110" ip the AP gave my
> dongel)
you can also do this with pppd. Look for "defaultroute".
> I did not belive that I get it working so quick despite the fact that I
> use Linux
> for about 3 weeks now.
> But I have still some questions.
>
> When plugging in the dongel I have to use bluefw 00X/00Y for the firmware
> to be loaded
> into the dongel. Is it possible to automate this?
Yes. You can use Linux Hotplug for this. Look at the mailing list
archive for more details about it. With 2.6 you can try the bcm203x
kernel driver for the firmware loading.
> Why is the 2nd light on the dongel off when it is connected?
This is dongle specific, so I can't tell you.
> P.S.: As promised I ll write a howto for this AP but I need some more
> testing time. ;)
Go ahead and do it.
Regards
Marcel
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users