Hello! I have a computer running kernel 2.6.7-mh1 and it is acting as a
PANU (pand --connect ...), which works very well. The GN on the other end
is a similarly configured computer. However, now I can't use ussp-push's
obextool on the PANU computer to send files to the mobile phone. Is this
expected or did I do something wrong? obextool push ... complains:
Can't connect. Too many links (31)
and fair enough, the connect() system call receives EMLINK.
Taneli
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit http://www.blackhat.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On Fri, 2004-07-02 at 19:06, Marcel Holtmann wrote:
> Hi Taneli,
>
[snip]
> > HCI Ver: 1.1 (0x1) HCI Rev: 0x1bb LMP Ver: 1.1 (0x1) LMP Subver: 0x1bb
> > Manufacturer: Cambridge Silicon Radio (10)
Aha! The GN side has a newer (?) chip:
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
And it did work! Thanks for the hint.
> the scatternet support of the HCI 15.3 firmware is very limited. If you
> know someone with a MacOS X you can ask him to update your dongle.
> Otherwise you are limited here, but maybe it already helps if you
> activate the role switch (rswitch) in hcid.conf.
rswitch didn't help, so I need to eventually ask my friend to help me
out. Thanks again!
Taneli
This is caused because of roleswitch - you probably didn't enable it in you=
r=20
configuration, or your dongle doesn't support role switch
Michal
On Friday 02 of July 2004 17:28, Taneli V=E4h=E4kangas wrote:
> Hello! I have a computer running kernel 2.6.7-mh1 and it is acting as a
> PANU (pand --connect ...), which works very well. The GN on the other end
> is a similarly configured computer. However, now I can't use ussp-push's
> obextool on the PANU computer to send files to the mobile phone. Is this
> expected or did I do something wrong? obextool push ... complains:
> Can't connect. Too many links (31)
> and fair enough, the connect() system call receives EMLINK.
>
> Taneli
>
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
> digital self defense, top technical experts, no vendor pitches,
> unmatched networking opportunities. Visit http://www.blackhat.com
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit http://www.blackhat.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Taneli,
> > from the Bluetooth stack this is possible, but maybe your local device
> > won't support it. What does "hciconfig -a" say?
>
> Here goes:
> hci0: Type: USB
> BD Address: 00:40:05:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:21619370 acl:80564 sco:0 events:9814 errors:0
> TX bytes:753307 acl:9833 sco:0 commands:23 errors:0
> Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'mylly-0'
> Class: 0x000100
> Service Classes: Unspecified
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x1bb LMP Ver: 1.1 (0x1) LMP Subver: 0x1bb
> Manufacturer: Cambridge Silicon Radio (10)
>
> It is a D-Link DBT-120.
the scatternet support of the HCI 15.3 firmware is very limited. If you
know someone with a MacOS X you can ask him to update your dongle.
Otherwise you are limited here, but maybe it already helps if you
activate the role switch (rswitch) in hcid.conf.
Regards
Marcel
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit http://www.blackhat.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On Fri, 2004-07-02 at 18:39, Marcel Holtmann wrote:
> Hi Taneli,
>
> > I have a computer running kernel 2.6.7-mh1 and it is acting as a
> > PANU (pand --connect ...), which works very well. The GN on the other end
> > is a similarly configured computer. However, now I can't use ussp-push's
> > obextool on the PANU computer to send files to the mobile phone. Is this
> > expected or did I do something wrong? obextool push ... complains:
> > Can't connect. Too many links (31)
> > and fair enough, the connect() system call receives EMLINK.
>
> from the Bluetooth stack this is possible, but maybe your local device
> won't support it. What does "hciconfig -a" say?
Here goes:
hci0: Type: USB
BD Address: 00:40:05:XX:XX:XX ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:21619370 acl:80564 sco:0 events:9814 errors:0
TX bytes:753307 acl:9833 sco:0 commands:23 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'mylly-0'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x1bb LMP Ver: 1.1 (0x1) LMP Subver: 0x1bb
Manufacturer: Cambridge Silicon Radio (10)
It is a D-Link DBT-120.
Thanks for the fast reply!
Taneli
Hi Taneli,
> I have a computer running kernel 2.6.7-mh1 and it is acting as a
> PANU (pand --connect ...), which works very well. The GN on the other end
> is a similarly configured computer. However, now I can't use ussp-push's
> obextool on the PANU computer to send files to the mobile phone. Is this
> expected or did I do something wrong? obextool push ... complains:
> Can't connect. Too many links (31)
> and fair enough, the connect() system call receives EMLINK.
from the Bluetooth stack this is possible, but maybe your local device
won't support it. What does "hciconfig -a" say?
Regards
Marcel
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit http://www.blackhat.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users