2004-08-05 21:50:07

by ben4fun

Subject: [Bluez-users] can't establish a connection

Good evening,

I have a bluetooth dongle (broadcom) which is recognised when I plugged
it. I think so because kdebluetooth says that an adaptor was found. But
I can't pair it to my mobile phone (SE T610). The dongle doesn't
recognise any incoming connection.

I found on the mailing list archive the following command: " hciconfig
-a" this is what I obtained. I hope it could help.

"hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:3 acl:0 sco:0 commands:1 errors:0
Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DH1 HV1
Link policy:
Link mode: SLAVE ACCEPT"

I maybe should say that I have a mandrake 10.0 and the kernel 2.6.3.

Regards,

Ben.

2004-08-05 22:51:41

by Marcel Holtmann

Subject: Re: [Bluez-users] can't establish a connection

Hi Ben,

> I have a bluetooth dongle (broadcom) which is recognised when I
> plugged it. I think so because kdebluetooth says that an adaptor was
> found. But I can't pair it to my mobile phone (SE T610). The dongle
> doesn't recognise any incoming connection.
>
> I found on the mailing list archive the following command: " hciconfig
> -a" this is what I obtained. I hope it could help.
>
> "hci0: Type: USB
> BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
> DOWN
> RX bytes:0 acl:0 sco:0 events:0 errors:0
> TX bytes:3 acl:0 sco:0 commands:1 errors:0
> Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DH1 HV1
> Link policy:
> Link mode: SLAVE ACCEPT"
>
> I maybe should say that I have a mandrake 10.0 and the kernel 2.6.3.

go on with "hciconfig hci0 up" and have fun with your dongle.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. http://www.ostg.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users