Hi Ben,
> Unfortunately it gives me "Can't init device hci0. Connection timed out(110)"
> Too bad.
show us the content of the /proc/bus/usb/devices file.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. http://www.ostg.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Ben,
> > so adding the broken ISOC quirk would be enough to make this dongle work
> > again. Maybe the last time I tested it, I had the SCO support disabled.
> Is this something to add in the kernel settings?
===== drivers/bluetooth/hci_usb.c 1.54 vs edited =====
--- 1.54/drivers/bluetooth/hci_usb.c 2004-07-31 12:57:14 +02:00
+++ edited/drivers/bluetooth/hci_usb.c 2004-08-17 23:32:42 +02:00
@@ -96,7 +96,7 @@
{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = HCI_IGNORE },
/* Broadcom BCM2035 */
- { USB_DEVICE(0x0a5c, 0x200a), .driver_info = HCI_RESET },
+ { USB_DEVICE(0x0a5c, 0x200a), .driver_info = HCI_RESET | HCI_BROKEN_ISOC },
/* ISSC Bluetooth Adapter v3.1 */
{ USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
> > What does "hciconfig hci0 revision" say? These versions look a little
> > bit wrong.
> hciconfig hci0 revision
> hci0: Type: USB
> BD Address: 00:02:72:B3:43:18 ACL MTU: 377:10 SCO MTU: 16:0
> Unsupported manufacturer
Update your libs and utils. The current version is 2.10.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Marcel,
> so adding the broken ISOC quirk would be enough to make this dongle work
> again. Maybe the last time I tested it, I had the SCO support disabled.
>
Is this something to add in the kernel settings?
> What does "hciconfig hci0 revision" say? These versions look a little
> bit wrong.
>
hciconfig hci0 revision
hci0: Type: USB
BD Address: 00:02:72:B3:43:18 ACL MTU: 377:10 SCO MTU: 16:0
Unsupported manufacturer
Regards
Ben
Hi Ben,
> But the cheapest way was to follow the advice of Marcel. It's almost
> done.
so adding the broken ISOC quirk would be enough to make this dongle work
again. Maybe the last time I tested it, I had the SCO support disabled.
> this is the results of my new hciconfig -a
>
> hci0: Type: USB
> BD Address: 00:02:72:B3:43:18 ACL MTU: 377:10 SCO MTU: 16:0
> UP RUNNING PSCAN ISCAN
> RX bytes:102019 acl:4770 sco:0 events:292 errors:0
> TX bytes:5159 acl:258 sco:0 commands:48 errors:0
> Features: 0xff 0xff 0x0d 0x38 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x000100
> Service Classes: Unspecified
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x3 LMP Ver: 1.1 (0x1) LMP Subver:
> 0x800
> Manufacturer: Broadcom Corporation (15)
What does "hciconfig hci0 revision" say? These versions look a little
bit wrong.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Le mar 17/08/2004 ? 09:49, Bc. Michal Semler a ?crit :
> Hi Marcel,
>
> better way is to buy a better dongle (CSR based) ;-)
>
> M.
>
But the cheapest way was to follow the advice of Marcel. It's almost
done.
With the new kernel from kernel.org, i can now send data from my mobile
phone to my pc.
But it doesn't work in the other way. It seems I have some problems to
pair the mobile phone with the pc.
But I am happy that it works in one way.
this is the results of my new hciconfig -a
hci0: Type: USB
BD Address: 00:02:72:B3:43:18 ACL MTU: 377:10 SCO MTU: 16:0
UP RUNNING PSCAN ISCAN
RX bytes:102019 acl:4770 sco:0 events:292 errors:0
TX bytes:5159 acl:258 sco:0 commands:48 errors:0
Features: 0xff 0xff 0x0d 0x38 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x3 LMP Ver: 1.1 (0x1) LMP Subver:
0x800
Manufacturer: Broadcom Corporation (15)
Big thanks to you Marcel ans Michal
Regards
Ben
Hi Marcel,
better way is to buy a better dongle (CSR based) ;-)
M.
Dne =FAt 17. srpna 2004 09:36 Marcel Holtmann napsal(a):
> Hi Ben,
>
> > I still cannot use my broadcom bluetooth dongle. It doesn't seem to be a
> > usb relevant problem. (as far as I know, cause I'm a newbie).
> >
> > This is what I get when I plug my dongle.
> >
> > tail -f /var/log/messages | grep usb
> >
> > Aug 16 11:17:25 localhost kernel: usb 1-1: new full speed USB device
> > using address 10
> > Aug 16 11:17:27 localhost kernel: usb 1-1.1: new full speed USB device
> > using address 11
> > Aug 16 11:17:28 localhost kernel: hci_usb_isoc_rx_submit: hci0 isoc rx
> > submit failed urb c1cb1014 err -90
> > Aug 16 11:17:28 localhost kernel: hci_usb_isoc_rx_submit: hci0 isoc rx
> > submit failed urb c1cb1014 err -90
> > Aug 16 11:17:30 localhost kernel: usb 1-1.2: new full speed USB device
> > using address 12
> > Aug 16 11:17:31 localhost kernel: input: USB HID v1.11 Keyboard
> > [0a5c:3502] on usb-0000:00:07.2-1.2
> > Aug 16 11:17:32 localhost kernel: usb 1-1.3: new full speed USB device
> > using address 13
> > Aug 16 11:17:33 localhost kernel: input: USB HID v1.11 Mouse [0a5c:3503]
> > on usb-0000:00:07.2-1.3
> >
> >
> > lsusb
> > Bus 002 Device 001: ID 0000:0000
> > Bus 001 Device 013: ID 0a5c:3503 Broadcom Corp.
> > Bus 001 Device 012: ID 0a5c:3502 Broadcom Corp.
> > Bus 001 Device 011: ID 0a5c:200a Broadcom Corp.
> > Bus 001 Device 010: ID 0a5c:3535 Broadcom Corp.
> > Bus 001 Device 001: ID 0000:0000
> >
> > I read your article Marcel Broadcom devices with bluetooth support but
> > the command HCI_Reset, returned an error. Do you have a clue?
>
> install a kernel where this problem is fixed.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
> 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
> Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
> http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Ben,
> I still cannot use my broadcom bluetooth dongle. It doesn't seem to be a
> usb relevant problem. (as far as I know, cause I'm a newbie).
>
> This is what I get when I plug my dongle.
>
> tail -f /var/log/messages | grep usb
>
> Aug 16 11:17:25 localhost kernel: usb 1-1: new full speed USB device
> using address 10
> Aug 16 11:17:27 localhost kernel: usb 1-1.1: new full speed USB device
> using address 11
> Aug 16 11:17:28 localhost kernel: hci_usb_isoc_rx_submit: hci0 isoc rx
> submit failed urb c1cb1014 err -90
> Aug 16 11:17:28 localhost kernel: hci_usb_isoc_rx_submit: hci0 isoc rx
> submit failed urb c1cb1014 err -90
> Aug 16 11:17:30 localhost kernel: usb 1-1.2: new full speed USB device
> using address 12
> Aug 16 11:17:31 localhost kernel: input: USB HID v1.11 Keyboard
> [0a5c:3502] on usb-0000:00:07.2-1.2
> Aug 16 11:17:32 localhost kernel: usb 1-1.3: new full speed USB device
> using address 13
> Aug 16 11:17:33 localhost kernel: input: USB HID v1.11 Mouse [0a5c:3503]
> on usb-0000:00:07.2-1.3
>
>
> lsusb
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 013: ID 0a5c:3503 Broadcom Corp.
> Bus 001 Device 012: ID 0a5c:3502 Broadcom Corp.
> Bus 001 Device 011: ID 0a5c:200a Broadcom Corp.
> Bus 001 Device 010: ID 0a5c:3535 Broadcom Corp.
> Bus 001 Device 001: ID 0000:0000
>
> I read your article Marcel Broadcom devices with bluetooth support but
> the command HCI_Reset, returned an error. Do you have a clue?
install a kernel where this problem is fixed.
Regards
Marcel
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi,
I still cannot use my broadcom bluetooth dongle. It doesn't seem to be a
usb relevant problem. (as far as I know, cause I'm a newbie).
This is what I get when I plug my dongle.
tail -f /var/log/messages | grep usb
Aug 16 11:17:25 localhost kernel: usb 1-1: new full speed USB device
using address 10
Aug 16 11:17:27 localhost kernel: usb 1-1.1: new full speed USB device
using address 11
Aug 16 11:17:28 localhost kernel: hci_usb_isoc_rx_submit: hci0 isoc rx
submit failed urb c1cb1014 err -90
Aug 16 11:17:28 localhost kernel: hci_usb_isoc_rx_submit: hci0 isoc rx
submit failed urb c1cb1014 err -90
Aug 16 11:17:30 localhost kernel: usb 1-1.2: new full speed USB device
using address 12
Aug 16 11:17:31 localhost kernel: input: USB HID v1.11 Keyboard
[0a5c:3502] on usb-0000:00:07.2-1.2
Aug 16 11:17:32 localhost kernel: usb 1-1.3: new full speed USB device
using address 13
Aug 16 11:17:33 localhost kernel: input: USB HID v1.11 Mouse [0a5c:3503]
on usb-0000:00:07.2-1.3
lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 013: ID 0a5c:3503 Broadcom Corp.
Bus 001 Device 012: ID 0a5c:3502 Broadcom Corp.
Bus 001 Device 011: ID 0a5c:200a Broadcom Corp.
Bus 001 Device 010: ID 0a5c:3535 Broadcom Corp.
Bus 001 Device 001: ID 0000:0000
I read your article Marcel Broadcom devices with bluetooth support but
the command HCI_Reset, returned an error. Do you have a clue?
Regards,
Ben
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On 0, ben4fun <[email protected]> wrote:
> It's done.
> After a reboot, I did "mount -t usbdevfs none /proc/bus/usb" from the
> USB-howto . It confirmed me it was already mounted. But it is strange
> that /proc/bus/usb/device file is still empty.
>
> Then I did "hciconfig hci0 up"
> and I still have "Can't init device hci0. Connection timed out(110)"
Check if hcid is running. If it is, try a more recent kernel.
nicholas
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33
Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi,
> add
>
> none /proc/bus/usb usbdevfs faults 0 0
>
> into /etc/fstab
>
> then write
> mount -a
It's done.
After a reboot, I did "mount -t usbdevfs none /proc/bus/usb" from the
USB-howto . It confirmed me it was already mounted. But it is strange
that /proc/bus/usb/device file is still empty.
Then I did "hciconfig hci0 up"
and I still have "Can't init device hci0. Connection timed out(110)"
But the hciconfig message changed. It is now:
"hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:6 acl:0 sco:0 commands:2 errors:0"
No idea why I have so much difficulties with this dongle.
Regards,
Ben
add=20
none /proc/bus/usb usbdevfs faults 0 0
into /etc/fstab
then write
mount -a=20
and try again
M.
Dne p=E1 6. srpna 2004 01:22 Marcel Holtmann napsal(a):
> Hi Ben,
>
> > Unfortunately it gives me "Can't init device hci0. Connection timed
> > out(110)" Too bad.
>
> show us the content of the /proc/bus/usb/devices file.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by OSTG. Have you noticed the changes on
> Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
> one more big change to announce. We are now OSTG- Open Source Technology
> Group. Come see the changes on the new OSTG site. http://www.ostg.com
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. http://www.ostg.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users