Hello,
Ever since the firmware upgrade to BT 1.2, my DBT 120
has been defaulting to HID mode. I only use HCI mode
currently, so it freaked me out the first time this
happened! I thought my dongle was dead! But then I
remembered hid2hci.
Is there a way to change the default mode of this dongle
back to HCI without downgrading the firmware?
--
Jesse Guardiani, Systems Administrator
WingNET Internet Services,
P.O. Box 2605 // Cleveland, TN 37320-2605
423-559-LINK (v) 423-559-5145 (f)
http://www.wingnet.net
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Jesse,
> Ever since the firmware upgrade to BT 1.2, my DBT 120
> has been defaulting to HID mode. I only use HCI mode
> currently, so it freaked me out the first time this
> happened! I thought my dongle was dead! But then I
> remembered hid2hci.
>
> Is there a way to change the default mode of this dongle
> back to HCI without downgrading the firmware?
yes, it is. You have to change the PS key for the boot mode.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users