Hi Marcel,
Thanks for your clarifications for my mail.
I am not able to establish SCO connection from PC to headset.
My linux kernel version is 2.4.29. I have downloaded the required
files from bluetooth-alsa.sf.net and followed the instructions as per
the Readme files.
To send audio over bluetooth:
i) I am using alsa-driver-0.9.6, snd-bluez-sco-2003-09-15 drivers.
ii) For alsa driver and library I patched
alsa-driver-0.9.6-bluezsco.patch,alsa-lib-0.9.6-bluezsco.patch
respectively.
iii) I am using bluetooth mono headset and on the linux PC I use a
standard USB bluetooth dongle.
iv) I have installed on a linux PC the alsa's snd-bluez-sco driver and
its dependencies.
I am getting the following results:
[root@localhost BT-Test]# hciconfig hci0 up
[root@localhost BT-Test]# hciconfig hci0 voice 0x0040
[root@localhost BT-Test]# hciconfig -a
hci0: Type: USB
BD Address: 01:5A:4B:20:07:DB ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:10132 acl:198 sco:0 events:421 errors:0
TX bytes:5332 acl:192 sco:0 commands:142 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x110 LMP Ver: 1.1 (0x1) LMP Subver:
0x110
Manufacturer: Cambridge Silicon Radio (10)
[root@localhost BT-Test]# hcitool scan
Scanning ...
AE:2D:00:44:01:00 HDS_MONO100
[root@localhostBT-Test]# sdptool search --bdaddr AE:2D:00:44:01:00
0x1108
Class 0x1108
Searching for 0x1108 on AE:2D:00:44:01:00 ...
Service Name: HSU
Service RecHandle: 0x90001
Service Class ID List:
"Headset" (0x1108)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 1
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Headset" (0x1108)
Version: 0x0100
[root@localhost BT-Test]# bluezsco AE:2D:00:44:01:00 1
Device is 0:0
Voice setting: 0x0040
RFCOMM channel connected
Can't connect SCO audio channel: No such file or directory
Please advice.
Thanks & Regards,
Benny
On Mon, 28 Feb 2005 09:12:23 +0100, Marcel Holtmann <[email protected]> wrote:
> Hi Benny,
>
> > We are planning for a single bluetooth device(microcontroller based)
> > featuring a headset and our custom hardware device which sends status
> > to the PC and gets control information over bluetooth. We plan to use
> > a Bluetooth SoC with Headset Profile interfaced to the microcontroller
> > over UART which fetches the status/control data from our custom
> > hardware.
> >
> > On the PC side(linux) we are going to use a standard USB Bluetooth
> > dongle. We are using the Bluez on the Linux PC side.
> >
> > i) We need to send audio information(playing song using some MP3
> > player) from PC to the bluetooth device headset and also send data
> > from Mic to the PC for voice recording.
> >
> > What setup we need to make for audio configuration in Linux PC to
> > route the audio information to the headset and a voice recording
> > setup?
>
> look at the information at bluetooth-alsa.sf.net
>
> > ii) Parallely we want to recieve the status info from the bluetooth
> > device and need to send the appropriate control information from PC.
> > We have tested data transfer between 2 PCs using BT USB dongles at
> > L2CAP level. But our final target is we need to implement in firware
> > on our Microcontroller.
> >
> > Is there a firmware level implementation of Bluez available?
>
> No and we don't have any plans for it, until the firmware of your
> Microcontroller is Linux based.
>
> Regards
>
> Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Benny
> My linux kernel version is 2.4.29.
I just fixed the docs to make it clear you need a recent 2.6 kernel.
Brad
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Benny
> We need to transfer additional data(full duplex between a linux PC and
> the Headset) parallely apart from the headset functionality. Is this
> possible?
It's not clear what you're asking since most (all?) headsets only
support audio data.
I believe you can open an rfcomm connection to the headset and transfer
data in parallel to audio if your headset knew what to do with it.
Brad
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Thanks Brad for your suggestion and now we got the Headset working
after upgrading our linux kernel to 2.6.9 and using latest CVS file
from the ALSA-Bluetooth project(btsco).
We need to transfer additional data(full duplex between a linux PC and
the Headset) parallely apart from the headset functionality. Is this
possible?
Please advice.
Thanks & Regards,
Benny
On Mon, 28 Feb 2005 09:27:22 -0700, Brad Midgley <[email protected]> wrote:
> Benny
>
> > My linux kernel version is 2.4.29.
>
> I just fixed the docs to make it clear you need a recent 2.6 kernel.
>
> Brad
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users