Hi Brad,
I appended some info bellow.
For some reason, btsco does not work with specified channel, but btsco2
does.
here is the info without specified channel:
./btsco 00:07:A4:1D:FB:56
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
recieved AT+CKPD=200
opened hwdep
connected SCO channel
Setting sco fd
Done setting sco fd
recieved AT+VGS=15
Sending up speaker change 15
and with specified channel (using btsco2 as btsco does not work here):
./btsco2 00:07:A4:1D:FB:56 2
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 2 connected
recieved AT+BRSF=24
recieved AT+CIND=?
opened hwdep
connected SCO channel
Setting sco fd
Done setting sco fd
On Fri, 14 Jan 2005 16:20:09 -0700, Brad Midgley wrote:
> it sounds like you're saying the automatic channel detection incorrectly
> chooses channel 1 instead of 2. can you tell me what btsco prints out when
> it's launched without the channel specified?
>
> Brad
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users